Assembly technician jobs in Placentia, CA - 496 jobs

Definition Under general and/or immediate supervision from higher level engineering staff, performs a variety of journey level technical drafting, office and field engineering work; and provides assistance and information to the public. May exercise functional and technical supervision over less experienced technical staff. Position Snapshot/A Day in the Life: The Engineering Technician II performs routine drafting and technical engineering work in support of municipal infrastructure projects. Responsibilities include assisting with engineering design and planning, providing customer service, and performing technical office and field duties related to updating, maintaining, and analyzing the Public Works and Engineering Department's Geographic Information System (GIS) and utility infrastructure data. This position coordinates and conducts research, field data collection, and condition assessments of infrastructure assets, using GIS, database, and information management tools to support capital planning and ensure compliance with regulatory requirements. Essential Functions Engineering Technician II -This is the full journey level in the Engineering Technician series. Employees within this class are distinguished from the Engineering Technician I By the performance of the full range of duties as assigned including the moderately complex duties of drafting, office and field engineering work. Employees at this level receive only occasional instruction or assistance as new or unusual situations arise, and are fully aware of the operating procedures and policies of the work unit. This class is flexibly staffed and is normally filled by advancement from the I level, or when filled from the outside, requires previous work experience. ESSENTIAL FUNCTIONS:Incumbent must have the ability to: Review and process tract maps, parcel maps, of line adjustments, grants of easement, and street right-of-ways for recordation. Verify fulfillment of conditions of approval for new subdivisions; perform on-site inspections to verify survey monuments related to parcel maps and lot line adjustments. Prepare and draft technical engineering plans for construction of streets, alleys, storm drains, water lines, and other public improvements. Provide public assistance at counter and over the telephone. Prepare quantity and cost estimates for engineering projects. Maintain a variety of maps and records including tract maps, parcel maps, lot line adjustments, easements, street and address changes. Review engineering plans to determine appropriate layout of construction projects. Perform on-site inspections to obtain information; determine angles and set grade stakes, hubs, turning points and benchmarks using appropriate surveying techniques; locate and measure boundary lines, right-of-ways, and land grades. Make and check mathematical calculations related to surveying, drafting and basic engineering. Maintain accurate survey records in the form of field notes and sketches. Participate in a variety of engineering design and planning work related to municipal engineering projects. Answer questions and provide information to the public concerning engineering activities. Assist in development and maintenance of the record keeping and filing systems. Prepare, assemble and distribute copies of maps, charts and blueprints. Answer questions and provide information to the public concerning engineering activities. Perform any other tasks or functions deemed necessary to the daily operations of the employer. THE ABOVE LIST OF ESSENTIAL FUNCTIONS IS NOT EXHAUSTIVE AND MAY BE SUPPLEMENTED AS NECESSARY BY THE EMPLOYER. WORKING CONDITIONS: Position requires prolonged sitting, standing, walking, reaching, twisting, turning, kneeling, bending, and stooping in the performance of daily activities. The position also requires grasping, repetitive hand movement and fine coordination in preparing reports using a computer keyboard. Additionally, the position requires near and far vision when preparing and reading written reports and other work related documents. Acute hearing is also required when providing phone and counter assistance. Experience and Training Guidelines EXPERIENCE AND TRAINING GUIDELINES: A combination of experience and training that would likely provide the required knowledge and abilities is qualifying. The employee must have knowledge of: Engineering Technician II: In addition the qualifications of Engineering Technician I, knowledge of: Terminology, methods, practices and techniques of drafting. Trigonometry as applied to the computation of angles, areas, distances and traverses. Elementary surveying techniques and practices. Engineering maps and records. Ability to: Perform moderately complex engineering and mathematic calculations with speed and accuracy. Understand and follow written instructions and sketches. Use and care for drafting, surveying, and mechanical instruments and tools. Work independently in the absence of supervision. Experience: Engineering Technician II - Two years of increasingly responsible experience performing drafting and technical engineering work. Education: Equivalent to completion of the twelfth grade supplemented by specialized training in drafting, surveying or a related field. The City of Fontana has a flexible benefits plan. This plan allows for employees to select benefits based upon their individual needs. Full-time and Classified Part-time employees are eligible for benefits. Please to view our excellent employee benefit options. 01 What is your highest level of education? High School graduate or equivalent Some college Trade school graduate or Apprenticeship Associate's degree in related field Bachelor's degree in related field Bachelor's degree or higher in non-related field Equivalent to Bachelor's degree in related field Master's degree or higher in related field None of the above 02 Please indicate how much experience you have in performing drafting and technical engineering work. No experience Less than one (1) year. One (1) year or more year(s) but less than two (2) years. Two (2) or more years but less than four (4) years. Four (4) or more years but less than six (6) years. Six (6) years or more but, less than eight (8) years. Required Question

Job Posting Start Date 01-16-2026 Job Posting End Date 02-13-2026 Crown Technical Systems, a Flex Company, is a leader in power distribution and protection systems concentrating on sophisticated, state-of-the-art relay and control panels, medium voltage switchgear, and enclosures (power/control buildings/ E-Houses). We specialize in customized, turn-key solutions that ensure safe, secure, and reliable power distribution. Working at Crown Technical Systems offers a dynamic and rewarding career path for individuals seeking to power the world. Through hands-on training, mentorship, and a culture of internal promotion, we empower you to reach your full potential and contribute to projects that truly matter. Job Summary To support our extraordinary teams who build great products and contribute to our growth, we're looking to add a/an Switchgear Assembler in USA, Fontana Ca. Reporting to the Production Manager the Switchgear Assembler is responsible for assembling fabricated metal parts for switchgear cabinets according to specifications. What a typical day looks like: Review, analyze, and follow various blueprints, diagrams, drawing, procedures, and work instructions to complete assemblies for enclosure buildings Mechanical assembly of components for switchgear cabinets Uses various power tools and hand tools (ex. Drills, impacts, screwdrivers, grinders, etc.) to accomplish assigned tasks Conduct quality assurance checks to confirm that assembled products meet specifications and quality standards Identify any product defects; record and report them accordingly Monitor and maintain inventory of necessary supplies, tools, and parts in work station Maintain a clean and safe work area Perform all other duties as assigned The experience we're looking to add to our team: High School Diploma or equivalent 0-2 years of related experience in assembly or manufacturing setting Prior experience operating powered equipment (forklift, reach truck, scissors lift, overhead crane, etc.) Strong attention to detail and ability to perform work accurately Knowledge of manufacturing, equipment maintenance, and safety management Reading comprehension skills with the ability to interpret and follow written directions, blueprints, wiring drawings, schematics, and engineering diagrams Basic math skills to meet technical specifications and measurements Basic understanding of tools (ex. Tape measure, impact drill, etc.) Demonstrated proficiency with the ability to safety operate powered equipment (forklift, reach truck, scissors lift, overhead crane, etc.) What the physical requirements are: Prolonged periods of standing, bending, kneeling, and performing repetitive tasks. Must be able to lift, push, pull up to 35 pounds at a time. Must have manual dexterity in order to assemble products or machines as directed. Must have excellent hand-eye coordination. Ability to differentiate between colored wires, tabs, and electronic components. Must wear PPE, such as gloves, safety glasses, hard hat, and ear protection, while working on the production floor #LI-GB1 What you'll receive for the great work you provide: Full range of medical, dental, and vision plans Life Insurance Short-term and Long-term Disability Matching 401(k) Contributions Vacation and Paid Sick Time Tuition Reimbursement Pay Range (Applicable to California)$17.98 USD - $24.27 USD HourlyJob CategoryOperations Is Sponsorship Available? No Crown is an Equal Opportunity Employer and employment selection decisions are based on merit, qualifications, and abilities. We do not discriminate based on: age, race, religion, color, sex, national origin, marital status, sexual orientation, gender identity, veteran status, disability, pregnancy status, or any other status protected by law. We're happy to provide reasonable accommodations to those with a disability for assistance in the application process. Please email accessibility@flex.com and we'll discuss your specific situation and next steps (NOTE: this email does not accept or consider resumes or applications. This is only for disability assistance. To be considered for a position at Crown, you must complete the application process first).

Job DescriptionDescription: Advanced Cooling Technologies, Inc. (ACT) is a premier thermal solutions provider providing component and system level solutions and structures. Our products and technologies have become integral parts of numerous mission-critical devices, including life-saving MRI and CT scanners, US Military applications, weather and telecommunication satellites, exploratory space missions, and much more. We are proud to be doing work that really makes a difference in our world- and beyond! Assemblers will be expected to perform numerous assembly and fabrication duties involving advanced composites such as Carbon Fiber, Kevlar, and complex adhesive systems. Because of the nature of spacecraft, and military hardware, all technicians must exhibit a high degree of discipline and work ethic. Assembly Technicians must have expansive experience with Aerospace composite assembly and fabrication and must be willing and able to perform a wide range of fabrication duties with a high degree of craftsmanship. Senior technicians are also expected to be innovative, versatile, and provide both leadership and training to junior technicians. Responsibilities: Assemble aircraft components and subassemblies according to manufacturing plans, drawings, specifications, and instructions Attach mechanical fasteners and other hardware onto components or subassemblies using rivets, screws, adhesives, or other fasteners Prepare surfaces for bonding by light sanding Perform masking operations on composite and metallic components, and subassemblies, for priming operations Perform edge and core filling operations as required for final assemblies Identify parts (part marking) as required by customer specifications Ensure that the materials used in fabrication meet the required specification and shelf-life requirements Clean fabricated parts when required, as required, during fabrication operations Requirements: High School Diploma or Equivalent Ability to operate in a fast-paced environment and contribute immediately upon hire Must be a US Person as defined by 22 C.F.R. §120.15? (U.S. Citizen, lawful permanent resident, refugee or asylee) Composite experience gained within an aviation manufacturing or aerospace company High volume manufacturing experience is a plus Must have a high level of technical skills to perform job duties Must be able to read blueprints and manufacturing instructions Must have operational knowledge of basic measurement tools: scales & calipers We offer an attractive and competitive compensation/benefits package, which includes a profit-sharing bonus plan. Our work environment is comfortable, collaborative, and stimulating. Apply now to get started on a career with ACT! If you are looking for an opportunity to start a career with a growing company doing exciting and important work, please apply today! ACT is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a protected veteran, status as a qualified individual with a disability, or any other trait protected by law. E-verify employer.

The Assembler I has ownership of the assembly stations assigned. They are responsible for safety, efficiency, quality, and overall productivity. The Assembler I will be expected to perform basic and intermediate assembly processes at within the department. ESSENTIAL JOB FUNCTIONS Follow a prism-based schedule. Ability to properly assemble basic and intermediate components within the Roto department which includes but is not limited to cleaning parts, tapping inserts, bolting and/or using self-tapping screws to secure components to main body part. Order and control hardware and ensure all is inventory is accounted for. Ability to recognize and follow departmental quality guidelines. Perform all aspects of product packaging including boxing, labeling, taping, stapling and stacking cartons using established pallet patterns. Knowledge of using basic hand and power tools. Maintains a personal efficiency rating in accordance with Key Performance Targets not to fall below 100%. Willing to cross train as needed in all the assembly cells which include non-Foam line, Ingredient Bin line, LCD line, Ferry 11-line, Bus Cart line, Kits, Packs, Food Bar & FSG line, Routing, Re-box area. Print labels using computers and proper application methods. Perform FG (finished goods) transactions with all associated labeling requirements. Follow all established assembly procedures and work instructions. Access the ESP program via computer. Ability to follow verbal assembly instructions and repeat processes. Adjusting to different work assignments throughout the workday. Maintain reliable and consistent attendance, including being punctual, and dependable in order to meet the needs of the department and the organization. Execute each essential duty satisfactorily in order to perform job successfully. Follows all safety procedures required in work area, wears PPE as needed, attends all safety meetings, and reports safety issues regarding equipment or unsafe/hazardous conditions. Performs effectively as a team member, able to work well with others, open to receive and give feedback, and treats everyone with respect. Takes ownership of own work and behavior, accepts accountability for own actions, encourages solutions, and communicates status of work/projects. Follow all department quality standards/criteria. Raise concerns and issues to immediate manager. Able to understand and demonstrate Cambro company culture, display company core values (Safety, Quality, Respect, and Service). Understands department's key performance indicators and contributes to achieve these goals both individually and as a team. Other duties as needed or required. ADDITIONAL RESPONSIBILITIES Must be able to work overtime as needed, remain flexible and open to possible schedule changes in order to meet business needs. REQUIRED QUALIFICATIONS The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. High school diploma or general education degree (GED); and one-year related experience and/or training; or equivalent combination of education and experience. Ability to communicate in English, both verbally and in writing. Comprehend instructions and communicate effectively. Ability to read and interpret documents such as safety rules and procedure manuals. Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. PREFERRED QUALIFICATIONS ERP system experience with Prism, Intermec, and/or AS400 system Bilingual in Spanish. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Sitting, walking, standing, bending at the neck, bending at the waist, squatting, climbing, kneeling, crawling, twisting at the neck and waist, repetitive use of hands, simple grasping, power grasping, fine manipulation, pushing and pulling, reaching above and below the shoulder, carrying/lifting up to 50 lbs. Driving cars, trucks, forklifts and other equipment Working around equipment and machinery Exposure to excessive noise Exposure to dust, gas, fumes or chemicals Working at heights Use of special visual or auditory protective equipment Walking on uneven ground Operation of foot controls or repetitive foot movement Risk of exposure to bio-hazard while working such as: bloodborne pathogens, sewage, hospital waste, etc. PPE REQUIREMENTS Safety glasses Utility gloves Steel-toe slip-resistant shoes Hardhat Hearing protection (e.g. ear plugs, ear muffs) Face shields Face covering (mask) in accordance with company policy. Mfg Assembler- ROTO COMPENSATION RANGE: $17.40 - $17.50 Salary may vary based on experience. CAMBRO is proud to be an equal-opportunity workplace. All qualified applicants will receive consideration for employment without regard to and will not be discriminated against based upon race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic information, military or veteran status, or other characteristics protected by law.

Preferred Job Qualifications: Previous experience in aerospace manufacturing or related industries familiarity with inspection processes and basic quality standards Ability to perform polishing and cleaning and packaging with attention to detail. Forklift certification or proven forklift operating experience. Ability to safely lift and move materials as required. Strong organizational and time management skills valid driver's license with a clean driving record Ability to follow written and verbal instructions accurately. Commitment to safety protocols and workplace cleanliness Strong teammate skills with the ability to work independently when needed. Physical and Mental Requirements: Able to lift 25 pounds regularly. Ability to sit or stand for extended periods. Must be adaptable to a constantly changing environment and perform well under deadlines. Experience and Education: Previous experience in a similar role is preferred but not required. Must demonstrate the ability to learn and apply new skills effectively. We are looking for motivated individuals who can contribute to our team-oriented environment and handle the demands of a high-paced production setting. Please note that this job description is not exhaustive. Management reserves the right to add, modify, change, or rescind work assignments or different positions and to make reasonable adjustments to ensure qualified employees can perform the essential functions of the job. Hourly Rate of Pay: $18.00/ hour to $20.00/ hour **Please note that the salary range information is only applicable to California. The pay range represents the low and high end of the salary range we reasonably expect to pay for this position at the time of posting. An employee's pay position within the salary range will be based on several factors, including, but not limited to, geographic location, experience, education, skills, qualifications, performance, and business or organizational needs. Equal Opportunity Employer: Western Precision Aero is an Equal Opportunity Employer and all employees of RBC are subject to E-Verity. Due to ITAR regulations, this position requires that the employee must be a U.S. Person (U.S. Citizen or Permanent Resident) or a Foreign Person for whom a license is obtained.

Job Description Astrophysics Inc. is a global leader in X-Ray security inspection systems, dedicated since 2002 to making the world safer through advanced screening technology. Our systems protect critical infrastructure in over 150 countries, serving airports, government buildings, military bases, and more. We are a fast-growing, dynamic company seeking a Mechanical Assembly Lead to join our headquarters in City of Industry, CA. Job Summary: The Mechanical Assembly Lead is responsible for actively participating in and coordinating mechanical assembly operations on the production floor. In addition to performing hands-on assembly tasks, the Lead supports a team of mechanical assemblers to ensure production goals, quality standards, and safety protocols are met. This role requires a strong mechanical background, leadership through example, and effective communication with both team members and management. Essential Functions: Perform mechanical assembly tasks in accordance with written instructions and specifications. Coordinate daily activities and task assignments within the mechanical assembly team. Support team members by answering questions, clarifying instructions, and assisting with troubleshooting. Ensure any deviations from written instructions are documented and communicated to the floor supervisor and manufacturing engineer. Help maintain production flow and meet schedule targets by working alongside the team. Train and mentor new assemblers on tools, techniques, and safety procedures. Conduct informal quality checks and help identify areas for improvement. Collaborate with engineering and production teams to resolve technical issues. Maintain clear documentation of assembly processes, deviations, and feedback. Foster a collaborative and safety-conscious work environment. Education and Experience: 5+ years of experience in mechanical assembly or production operations Excellent organizational and time-management skills Experience working in a team-oriented manufacturing environment Strong mechanical aptitude and familiarity with tools, components, and assembly techniques Ability to read and interpret technical drawings, schematics, and written instructions Effective communication and interpersonal skills Position Type/Expected Hours of Work: Non-exempt Full-Time Hours: 7:00am- 3:30pm (Hours subject to change depending on the needs of the business) Benefits & Perks: Excellent medical, dental and vision benefits 401K plan with 4% employer match 11 paid holidays, 10 PTO days Free donuts on Fridays, company luncheons and year end party! Be part of a meaningful security mission with opportunities for personal and professional growth and development. Join our Astrophysics family today! Equal Opportunity Employer Astrophysics Inc. is an Equal Opportunity Employer. All qualified applicants will receive consideration without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran status, or disability. For accommodation requests, please contact Human Resources at **************. Powered by ExactHire:186581

RH is seeking a skilled and detail-oriented Wood Hardware Assembly Specialist to join our Dennis & Leen/Formations Workshop in Torrance, CA. This role plays an important part in assembling and installing fine hardware on luxury, antique-style furniture pieces. The Wood Hardware Assembly Specialist combines precision craftsmanship with technical expertise, ensuring that every element is secured flawlessly and finished beautifully. In this role, you bring patience, a refined eye for detail, and deep respect for the artistry and heritage that define our timeless designs. YOUR RESPONSIBILITIES Measure, mark, and drill for hardware installation, ensuring precise alignment and secure fit on delicate, high-value furniture Prepare and finish hardware components, including chemical treatments to achieve antique or aged effects that match each piece's design Handle premium, custom, or antique reproduction hardware carefully to avoid scratches or damage during installation Prepare wood surfaces by filling old holes, sanding, and color-matching finishes for seamless results Read and interpret blueprints, drawings, and design specifications to determine correct hardware placement and installation methods Identify wood types, veneers, and finishes to select proper tools and techniques that preserve material integrity Inspect each completed installation for accuracy, function, and aesthetic excellence Maintain and calibrate hand and power tools, including drills, jigs, and measuring devices Troubleshoot and resolve alignment or fitting challenges on unique or vintage furniture pieces Maintain an organized, clean, and safe workspace that protects fine furniture and tools Collaborate with project managers, designers, and other artisans to ensure design intent and quality expectations are met OUR REQUIREMENTS 2+ years of experience in furniture installation, cabinetry, or related fine woodworking disciplines Proficiency with hand and power tools used in precision woodwork and hardware installation Strong manual dexterity and attention to detail when working with delicate or high-value materials Experience interpreting drawings, templates, and measurements accurately Knowledge of traditional furniture construction and antique-style design aesthetics Creative problem-solving skills to address challenges in fitting or restoration projects Professional demeanor and commitment to delivering the highest level of craftsmanship Experience in luxury or custom furniture production preferred PHYSICAL REQUIREMENTS Handles and positions wood furniture components weighing up to 75 lbs. regularly Performs visual inspections and detailed alignment work requiring fine motor control and concentration Stands, bends, and performs repetitive hand movements for extended periods in a workshop environment Works in areas with exposure to dust, adhesives, and finishing materials while adhering to safety and PPE standards Operates precision tools and equipment requiring coordination, balance, and focus

Job DescriptionElectro-Mechanical AssemblersLocation: Chatsworth, CA Duration: 3 - 6 months or longer Schedule: Monday - Friday, 06:00 AM - 2:30 PM Pay Rate: $23.00 - $25.00 per hour (based on experience) Requirements: Experience performing electrical AND mechanical assembly work Ability to read and understand manufacturing drawings and work instructions Ability to speak, read and write in English Must be capable of using standard tools required for electrical/mechanical assembly (crimpers, torque tools, standard hand tools, etc.) Must be able to work in a fast-paced production environment with minimal supervision

Title: Assembly & Test/Tech 'A' - 2nd Shift Company: VACCO Industries Pay Range: $30.17 - $38.01 Assembles pneumatic and hydraulic valves, partially or completely, and conducts a variety of tests on systems, subassemblies, and parts to ensure unit functions according to acceptance procedures or to determine cause of unit failure by performing the following duties. ESSENTIAL DUTIES AND RESPONSIBILITIES: * Conducts high pressure and cryogenic testing safely. * Working from blueprints assembles and tests various valves and filters within allotted timeframe and insures conformance with assembly performance tests specifications. * Working from blueprints, work orders, quality control test manuals, performance specifications, schematics to determine testing procedure and equipment to be used. * Calibrates test instruments according to specifications. * Analyzes test results related to the design and test objectives, modifies or adjusts equipment to meet specifications. * Records these test procedures and results, numerical and graphical data and recommendations for changes in product or test method. * Compares results with specifications and documents test data. * Assembles various quiet disc stacks. * Analyzes test results on defective units to determine cause of failure. * Verifies dimensions of mechanical parts using hand-held measuring equipment such as micrometers, indicators and depth mikes. * Verifies dimensions of mechanical parts using hand-held measuring equipment. * Knowledge of chem etching (markings), tube bending and how to clean parts in pre-clean. * Ability to operate and maintain equipment such as Instron machines, AstroMed and mass spectrometer. * Confers with engineers, technicians, production personnel, quality control personnel and others regarding testing procedures and results to resolve problems. * Capable of operating airborne and structure borne noise measurement equipment. QUALIFICATIONS: * Possess interpersonal skills required to build relationships and work in a team environment. * Possess good leadership skills. * Good communication skills both verbal and written. * Ability to use good judgment in decision making and problem solving. * Ability to read and interpret blueprint and schematic drawings. * Working knowledge of standard test equipment i.e. data recorders, pressure transducers and gauges, flow measuring devices, environmental chambers, thermo-coupling, and helium leak detectors. * Proficiency in the use of MS software such as Word, Excel and Outlook. * Basic knowledge of plant operations and processes. EDUCATION and/or EXPERIENCE: Two year certificate from college or technical school; with three (3) years of related experience and/or training; or a High School Diploma or GED Certificate and five (5) years of related experience or equivalent combination of education and experience. Nearest Major Market: Los Angeles

About Our Client: Our client, a Fortune 500 Medical Device company, is recognized as one of the “World's Best Workplaces” and a “Best Workplace for Diversity” by Fortune Magazine! This company has climbed to the top, gaining a reputation for both excellence and satisfaction and is hiring individuals who are self-motivated, results driven, and take pride in the impact their work has on patients and healthcare professionals. Key Responsibilities: Supporting and assisting engineers in designing, developing, producing, and testing components and equipment. Preparing detailed technical drawings, schematics, and layouts to support engineering projects. Conducting materials testing, analyzing results, and documenting findings. Performing equipment maintenance, calibration, and mechanical/electrical repairs. Monitoring and testing prototypes, models, and products under development. Writing technical reports, identifying issues, and suggesting corrective solutions. Collaborating with engineers and cross-functional teams to resolve technical problems. Operating, troubleshooting, and maintaining complex instruments, gauges, and testing equipment. Qualifications: Technical training or hands-on experience preferred. Demonstrating experience with complex instruments, testing equipment, and gauges. Applying technical troubleshooting skills to mechanical and electrical systems. Utilizing attention to detail and problem-solving to support engineering projects. Showing knowledge of CAD software or other engineering tools. Applying familiarity with manufacturing processes and product development cycles. Demonstrating effective communication skills in documenting and presenting technical findings. NO C2C CANDIDATES Interested Candidates please apply on our website at https://jobs.jblresources.com. For more information about our services and great opportunities at JBL Resources, please visit our website: https://www.jblresources.com. JBL Resources is proud to have earned the reputation of being a premier provider of top talent professionals in the fields of engineering, human resources, logistics, operations, and supply chain management. As specialists in both permanent placement and contract services, our mission is to help companies and individuals become all they were created to be. **JBL is an Equal Opportunity Employer and E-Verify Company

Spacecraft represent the most pressing unmet need across the entire aerospace industry. As more launch vehicles come online and the cost to orbit decreases, more companies launching payloads to space continue to emerge. For the first time in history, this influx of payload companies combined with reduced launch costs has resulted in a massive increase in need for commercial spacecraft platforms, known as satellite buses. These buses hold the payloads of our customers and are flown on launch vehicles. Apex manufactures these satellite buses at scale using a combination of software, vertical integration, and hardware that is designed for manufacturing. Our spacecraft enable the future of society: ranging from earth observation to communications and more. We'd love for you to join us on our mission of providing humankind access to the galaxy beyond our planet. About the Role Apex Space is seeking a highly skilled and experienced Spacecraft Technician to join our dynamic team. As a Spacecraft Technician, you will play a critical role in the assembly, integration, and testing of our spacecraft. Your expertise in aerospace structures, avionics, and harnessing will be essential in ensuring the successful development and deployment of our advanced space systems. Responsibilities: Perform assembly, integration, and testing (AIT) activities for satellite and spacecraft development projects, following engineering specifications, procedures, and safety protocols. Conduct structural assembly and integration tasks, including component installation, mechanical fastening, bonding, and precision alignment. Integrate avionics systems, including electronic components, sensors, and wiring harnesses, ensuring proper connections, routing, and functionality. Collaborate closely with engineers and other technicians to troubleshoot and resolve technical issues during assembly and integration activities. Perform system-level functional tests, including electrical continuity, power distribution, communication, and sensor verification. Utilize precision measurement tools and equipment to ensure adherence to dimensional requirements and alignment tolerances. Participate in environmental testing, such as thermal vacuum, vibration, and shock testing, to validate satellite and spacecraft performance and durability. Support the development and maintenance of assembly and integration procedures, work instructions, and quality documentation. Ensure compliance with quality standards, industry best practices, and safety regulations throughout the assembly and integration process. Maintain accurate records of assembly activities, test results, and any anomalies or discrepancies encountered. Contribute to the continuous improvement of assembly and integration processes, recommending and implementing efficiency enhancements and quality improvements. Stay updated with the latest advancements and best practices in satellite and spacecraft development and testing methodologies. Requirements: U.S. Person status is required as this position needs to access export-controlled data. Minimum 5+ years of experience in satellite or spacecraft assembly and integration, specifically in aerospace structures, avionics integration, and harnessing. Proficiency in precision assembly techniques, including mechanical fastening, bonding, and alignment. Strong understanding of aerospace electrical systems, avionics, and wiring harnesses. Experience in conducting system-level functional tests and troubleshooting electrical and mechanical systems. Familiarity with environmental testing methods, such as thermal vacuum, vibration, and shock testing. Working knowledge of precision measurement tools and equipment used in satellite and spacecraft assembly and integration. Familiarity with quality standards and processes related to aerospace manufacturing. Ability to interpret engineering drawings, specifications, and technical documents. Excellent attention to detail, with strong problem-solving and analytical skills. Ability to work effectively in a team environment, collaborating with engineers and technicians. Strong commitment to safety, always adhering to safety protocols and guidelines. Excellent communication skills, with the ability to effectively convey technical information to team members and stakeholders. Why Join Apex? Apex believes in creating a work environment that you look forward to embracing every day. Our employees love working at Apex, and we want you to love it too. We're a fast-growing startup backed by $200M in Series D funding, and we invest heavily in our people from day one. What We Offer For Full-time Employees: Shared upside: Receive equity in Apex, letting you benefit from the work you create Best-in-class healthcare: 100% company-paid medical, dental, and vision for you and your dependents, plus $100k life insurance at no cost Comprehensive PTO package to reset and recharge - starting at 15 days vacation, growing to 20+ days annually, plus 10 paid holidays Competitive 401(k) plan with generous matching - 100% match on first 3%, 50% on next 2% 8 weeks paid parental leave plus childcare reimbursement up to $350/day for work-related travel Daily catered lunch and unlimited snacks to keep you fueled throughout the day Vibrant community: Monthly office BBQs, pickleball tournaments, run club, and social gatherings for you and your family Your dream desk setup and all the tools you need to be your most productive self World-class Playa Vista office with EV chargers, with the benefit of in-person collaboration with amazing coworkers and flexibility to integrate work and life Real impact opportunity: Work alongside experts from aerospace, new space, and other cutting-edge industries to make a lasting difference Ready to join a team where your contributions matter and your future is bright? Let's build something extraordinary together. Equal Opportunity Employer Apex Technology, Inc. is an Equal Opportunity Employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. Candidates and employees are always evaluated based on merit, qualifications, and performance. We will never discriminate on the basis of race, color, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability, or any other legally protected status.

Job Description Furniture Assembly Tech CA Flexible, Part-Time Opportunity to service Your Local Office Supply Store Do you have experience assembling furniture at Office Supply Stores or similar organizations doing handy work? We want you on our team! SPAR is seeking skilled assemblers to perform on-site service and furniture assembly in Office Supply Stores, as well as in-home assembly projects. Are you great with your hands? Do you enjoy assembling furniture and seeing the finished product of your work? If you have experience as an assembler, especially at Office Supply Stores, we want YOU on our team! Why You'll Love This Job: Great Pay: $16.75 - $18/hour for showroom service work Get Paid Fast: With DailyPay, you can work today and get paid tomorrow! Free enrollment required Consistent Work: Part-time, on-going projects servicing Office Supply Stores & customers in-home furniture assembly purchases Work Independently: Enjoy the flexibility of working on your own while still being part of a great team What You'll Be Doing: Assembling Ready-to-Assemble (RTA) Furniture in retail showrooms and customer homes Ensuring displays are set up properly and well-maintained Following plan-o-grams and completing customized category resets Reporting your completed work on the same day via our easy online system What You Bring to the Team: Previous merchandising or commercial furniture assembly experience (Office Supply Stores experience is a plus!) Ability to read instructions and assemble furniture efficiently Can lift up to 50 lbs. and stand for extended periods Reliable transportation (some travel may be required) Your own basic tools (drills, screwdrivers, etc.) Internet access and active email for reporting Be Part of Something Bigger! At SM&A, we provide essential services to top retailers and manufacturers across the U.S. Our work keeps retail moving forward, and we need talented individuals like YOU to help make it happen. Ready to build a career? Apply today! We Are an Equal Opportunity Employer SPAR provides Equal Employment Opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability or genetics. In addition to federal law requirements, SPAR complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training. SPAR expressly prohibits any form of workplace harassment based on race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, genetic information, disability, or veteran status. Improper interference with the ability of SPAR's employees to perform their job duties may result in discipline up to and including discharge.

Spacecraft represent the most pressing unmet need across the entire aerospace industry. As more launch vehicles come online and the cost to orbit decreases, more companies launching payloads to space continue to emerge. For the first time in history, this influx of payload companies combined with reduced launch costs has resulted in a massive increase in need for commercial spacecraft platforms, known as satellite buses. These buses hold the payloads of our customers and are flown on launch vehicles. Apex manufactures these satellite buses at scale using a combination of software, vertical integration, and hardware that is designed for manufacturing. Our spacecraft enable the future of society: ranging from earth observation to communications and more. We'd love for you to join us on our mission of providing humankind access to the galaxy beyond our planet. About the Role Apex Space is seeking a highly skilled and experienced Spacecraft Technician to join our dynamic team. As a Spacecraft Technician, you will play a critical role in the assembly, integration, and testing of our spacecraft. Your expertise in aerospace structures, avionics, and harnessing will be essential in ensuring the successful development and deployment of our advanced space systems. Responsibilities: * Perform assembly, integration, and testing (AIT) activities for satellite and spacecraft development projects, following engineering specifications, procedures, and safety protocols. * Conduct structural assembly and integration tasks, including component installation, mechanical fastening, bonding, and precision alignment. * Integrate avionics systems, including electronic components, sensors, and wiring harnesses, ensuring proper connections, routing, and functionality. * Collaborate closely with engineers and other technicians to troubleshoot and resolve technical issues during assembly and integration activities. * Perform system-level functional tests, including electrical continuity, power distribution, communication, and sensor verification. * Utilize precision measurement tools and equipment to ensure adherence to dimensional requirements and alignment tolerances. * Participate in environmental testing, such as thermal vacuum, vibration, and shock testing, to validate satellite and spacecraft performance and durability. * Support the development and maintenance of assembly and integration procedures, work instructions, and quality documentation. * Ensure compliance with quality standards, industry best practices, and safety regulations throughout the assembly and integration process. * Maintain accurate records of assembly activities, test results, and any anomalies or discrepancies encountered. * Contribute to the continuous improvement of assembly and integration processes, recommending and implementing efficiency enhancements and quality improvements. * Stay updated with the latest advancements and best practices in satellite and spacecraft development and testing methodologies. Requirements: * U.S. Person status is required as this position needs to access export-controlled data. * Minimum 5+ years of experience in satellite or spacecraft assembly and integration, specifically in aerospace structures, avionics integration, and harnessing. * Proficiency in precision assembly techniques, including mechanical fastening, bonding, and alignment. * Strong understanding of aerospace electrical systems, avionics, and wiring harnesses. * Experience in conducting system-level functional tests and troubleshooting electrical and mechanical systems. * Familiarity with environmental testing methods, such as thermal vacuum, vibration, and shock testing. * Working knowledge of precision measurement tools and equipment used in satellite and spacecraft assembly and integration. * Familiarity with quality standards and processes related to aerospace manufacturing. * Ability to interpret engineering drawings, specifications, and technical documents. * Excellent attention to detail, with strong problem-solving and analytical skills. * Ability to work effectively in a team environment, collaborating with engineers and technicians. * Strong commitment to safety, always adhering to safety protocols and guidelines. * Excellent communication skills, with the ability to effectively convey technical information to team members and stakeholders. 2nd Shift Hours: 2PM-10:30PM + 10% shift differential Why Join Apex? Apex believes in creating a work environment that you look forward to embracing every day. Our employees love working at Apex, and we want you to love it too. We're a fast-growing startup backed by $200M in Series D funding, and we invest heavily in our people from day one. What We Offer For Full-time Employees: * Shared upside: Receive equity in Apex, letting you benefit from the work you create * Best-in-class healthcare: 100% company-paid medical, dental, and vision for you and your dependents, plus $100k life insurance at no cost * Comprehensive PTO package to reset and recharge - starting at 15 days vacation, growing to 20+ days annually, plus 10 paid holidays * Competitive 401(k) plan with generous matching - 100% match on first 3%, 50% on next 2% * 8 weeks paid parental leave plus childcare reimbursement up to $350/day for work-related travel * Daily catered lunch and unlimited snacks to keep you fueled throughout the day * Vibrant community: Monthly office BBQs, pickleball tournaments, run club, and social gatherings for you and your family * Your dream desk setup and all the tools you need to be your most productive self * World-class Playa Vista office with EV chargers, with the benefit of in-person collaboration with amazing coworkers and flexibility to integrate work and life * Real impact opportunity: Work alongside experts from aerospace, new space, and other cutting-edge industries to make a lasting difference Ready to join a team where your contributions matter and your future is bright? Let's build something extraordinary together. Equal Opportunity Employer Apex Technology, Inc. is an Equal Opportunity Employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. Candidates and employees are always evaluated based on merit, qualifications, and performance. We will never discriminate on the basis of race, color, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability, or any other legally protected status.

AnySignal is a startup whose mission is to usher in the next generation of RF products and services. For the most demanding space and defense missions, AnySignal provides a flexible platform with world-class performance that is easy to deploy, monitor, purchase, and upgrade. Our team has a diverse range of backgrounds that cover cloud computing to artificial intelligence, communications and sensing, embedded systems, and much more. About the Role We are seeking a detail-oriented, hands-on Assembly & Test Technician to join our fast-growing production team. You will play a key role in assembling, testing, and preparing our hardware systems for deployment. This role is ideal for someone who enjoys working with mechanical and electronic components, is eager to learn, and thrives in a dynamic, high-precision environment. Soldering expertise is a plus but not required - we value precision, care, and adaptability.What You'll Do Assemble mechanical and electronic components using tools (including torque wrenches) following detailed procedures. Apply staking materials for stability. Use our production tracking software to track builds and workflow. Execute basic test scripts and bash commands on hardware systems. Record, document, and communicate test results clearly and accurately. Collaborate with engineers to troubleshoot and resolve assembly or test issues. Bonus (Not Required) Soldering experience (we'll provide training) and experience handling sensitive PCSs. Basic understanding of electronic debugging or electrical engineering concepts. Prior experience in hardware production environments (aerospace, medical, RF, or similar). Why Join AnySignal?- Work on groundbreaking hardware systems for space and aerospace.- Build meaningful, hands-on skills with the support of a passionate, experienced team.- Receive competitive pay and opportunities for growth.- Be part of a fast-moving startup where your contributions matter. AnySignal values and fosters an inclusive, accessible environment, where all employees and customers feel respected, supported and able to participate. We welcome applications from: women, Aboriginal persons, persons with disabilities, ethnic minorities, visible minorities, veterans, people who identify as LGBTQIA2S+ and others who may contribute to diversification in our environment. Should you have a need for accommodation, AnySignal will endeavor to meet your accommodation needs. At any stage of the recruitment and selection process you may make your needs for accommodation known through contacting our team, in confidence, by email to: *********************. We aim to provide equal access to all applicants with disabilities, please do not hesitate to contact us about accommodations.

At Reflect, you will be expected to move fast, have a lot of ownership and, most importantly, be able to effect change. If this excites you, we are interested in hearing about your best work and accomplishments across any domain and from any points in your life. About the Role As a Spacecraft Integration Technician, you'll be at the heart of assembling and validating our spacecraft from the ground up. From joining mechanical structures and routing harnesses, to running system-level checkouts and environmental tests, you'll bring each subsystem together into one cohesive vehicle. You'll collaborate closely with design, test, and analysis teams, ensuring that every bolt, connector, and software build works in harmony before we send it to orbit. Responsibilities Lead the mechanical and electrical integration of spacecraft subsystems, from bench assembly to final flight build Develop assembly procedures, test plans, and integration workflows for flight hardware Troubleshoot and debug hardware and software anomalies during integration and test Ensure proper configuration control and documentation at every stage of assembly Collaborate with test engineers on vibration, thermal vacuum, and other environmental testing Own the spacecraft through final integration, guiding it from prototype to launch readiness Ideal Qualifications Extensive experience with system-level integration of aerospace hardware (satellites, launch vehicles, etc.) Proficiency in reading and interpreting mechanical drawings, electrical schematics, and wiring diagrams Hands-on skill set in both mechanical assembly and electrical test/validation (oscilloscopes, DMMs, etc.) Ability to navigate fast-paced integration schedules and pivot when encountering unexpected challenges Familiarity with spacecraft environmental testing protocols and requirements Even if you don't meet 100% of the above qualifications, we are likely still interested in hearing from you. Hiring exceptional individuals is our #1 priority, and we believe that exceptional people often have highly unusual backgrounds. We are also interested in carving out unique roles for unconventional people that we are excited about working with. Benefits Reflect Orbital's success will hinge on our team, which is why our compensation and benefits plan is designed to reward our employees and support their families as generously as we're able. Broad choice of medical/dental/vision coverage, Reflect covers 100% of each base-policy Access to HSA, FSA, and 401K Unlimited paid time off, two-weeks per year encouraged Healthy lunches provided daily Equal Opportunity Reflect Orbital is an Equal Opportunity Employer; employment with Reflect Orbital is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status. More about Reflect Orbital: Learn more about our team here.

At Niagara, we're looking for Team Members who want to be part of achieving our mission to provide our customers the highest quality most affordable bottled water. Consider applying here, if you want to: Work in an entrepreneurial and dynamic environment with a chance to make an impact. Develop lasting relationships with great people. Have the opportunity to build a satisfying career. We offer competitive compensation and benefits packages for our Team Members. Engineering Technician III (Aseptic Filler/ Capper) The Engineering Technician III (Aseptic Filler/ Capper) will be working on the production floor with plant technicians at Niagara facilities around the country. Tasks include performing diagnostic visits on production lines in preparation for an annual rebuild/overhaul, taking part, on a team, in those line rebuilds/overhauls, and providing support to those plants that are in need of help. Essential Functions Providing Plant Support for Niagara Facilities Provide aid and expertise to plant maintenance teams and internal Engineering Technicians Aid in any needed repairs on production machinery, as necessary Provide information on needs for long term success of facilities, including but not limited to the Focus Line Process Diagnostic Visits Identify problems and wear & tear on machine centers for every line. Perform root cause analysis for corrective actions Develop suggestions for parts and labor needed during annual rebuilds/overhauls Annual Rebuilds/Overhauls Work on teams of 4, along with plant maintenance teams Prepare machine centers to repair/rebuild problems found during Diagnostic Visits Training Attend machine center specific master class training as a baseline Assist with evaluation of Engineering Technicians skills on machine centers via a written assessment card Assist with the training of Engineering Technicians thru an OJT style format Suggest machine center specific training modules for the Engineering Technicians that are needed above and beyond the OJT system Assist with the further development and implementation of the OJT style training for our group Travel Requirements: Approximately 75% of the year (10x4 Schedule) Please note this job description is not designed to contain a comprehensive list of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without prior notice. Qualifications Minimum Qualifications: 4 Years - Experience in Field or similar manufacturing environment 4 Years - Experience in Position 2 Years - Experience managing people/projects *experience may include a combination of work experience and education Preferred Qualifications: 6 Years- Experience in Field or similar manufacturing environment 6 Years - Experience working in Position 4 Years - Experience managing people/projects *experience may include a combination of work experience and education Competencies Some Proficiency in, but not limited to: Microsoft Office Applications - Word, Excel, Access, PowerPoint, Outlook, Visio, etc. Able to work with others Often placed in teams of 4, or occasionally more. Often working in conjunction with plant maintenance staff Strong analytical and problem solving skills Self-Motivated with a proven record of taking the initiative Able to work with minimal supervision Must exhibit leadership capability when working both alone and with teams in order to complete projects safely and in a timely fashion. Detail-oriented with excellent verbal and written communication skills Able to execute tasks in a very dynamic and ever-changing environment Exercise sound judgment and ability to work effectively with a diverse workforce Required to be considered an SME (Subject Matter Expert) in a given machine center that is pertinent to Niagara Bottlings business needs. Education Minimum Required: Associate's Degree in Engineering or other related field Preferred: Bachelor's Degree in Engineering or other related field Certification/License: Required: N/A Preferred: N/A Foreign Language Required: None Required Preferred: None Required Typical Compensation Range Pay Rate Type: Hourly$28.90 - $41.91 / Hourly Benefits Our Total Rewards package is thoughtfully designed to support both you and your family: Regular full-time team members are offered a comprehensive benefits package, while part-time, intern, and seasonal team members are offered a limited benefits package. Paid Time Off for holidays, sick time, and vacation time Paid parental and caregiver leaves Medical, including virtual care options Dental Vision 401(k) with company match Health Savings Account with company match Flexible Spending Accounts Expanded mental wellbeing benefits including free counseling sessions for all team members and household family members Family Building Benefits including enhanced fertility benefits for IVF and fertility preservation plus adoption, surrogacy, and Doula reimbursements Income protection including Life and AD&D, short and long-term disability, critical illness and an accident plan Special discount programs including pet plans, pre-paid legal services, identity theft, car rental, airport parking, etc. Tuition reimbursement, college savings plan and scholarship opportunities And more! *********************************************** * *Los Angeles County applicants only** Qualified applicants with arrest or conviction records will be considered for employment in accordance with the Los Angeles County Fair Chance Ordinance for Employers, the California Fair Chance Act, and any other applicable local and state laws. Any employment agency, person or entity that submits a résumé into this career site or to a hiring manager does so with the understanding that the applicant's résumé will become the property of Niagara Bottling, LLC. Niagara Bottling, LLC will have the right to hire that applicant at its discretion without any fee owed to the submitting employment agency, person or entity. Employment agencies that have fee agreements with Niagara Bottling, LLC and have been engaged on a search shall submit résumé to the designated Niagara Bottling, LLC recruiter or, upon authorization, submit résumé into this career site to be eligible for placement fees.

Advanced Cooling Technologies, Inc. (ACT) is a premier thermal solutions provider providing component and system level solutions and structures. Our products and technologies have become integral parts of numerous mission-critical devices, including life-saving MRI and CT scanners, US Military applications, weather and telecommunication satellites, exploratory space missions, and much more. We are proud to be doing work that really makes a difference in our world- and beyond! Assemblers will be expected to perform numerous assembly and fabrication duties involving advanced composites such as Carbon Fiber, Kevlar, and complex adhesive systems. Because of the nature of spacecraft, and military hardware, all technicians must exhibit a high degree of discipline and work ethic. Assembly Technicians must have expansive experience with Aerospace composite assembly and fabrication and must be willing and able to perform a wide range of fabrication duties with a high degree of craftsmanship. Senior technicians are also expected to be innovative, versatile, and provide both leadership and training to junior technicians. Responsibilities: * Assemble aircraft components and subassemblies according to manufacturing plans, drawings, specifications, and instructions * Attach mechanical fasteners and other hardware onto components or subassemblies using rivets, screws, adhesives, or other fasteners * Prepare surfaces for bonding by light sanding * Perform masking operations on composite and metallic components, and subassemblies, for priming operations * Perform edge and core filling operations as required for final assemblies * Identify parts (part marking) as required by customer specifications * Ensure that the materials used in fabrication meet the required specification and shelf-life requirements * Clean fabricated parts when required, as required, during fabrication operations Requirements * High School Diploma or Equivalent * Ability to operate in a fast-paced environment and contribute immediately upon hire * Must be a US Person as defined by 22 C.F.R. §120.15? (U.S. Citizen, lawful permanent resident, refugee or asylee) * Composite experience gained within an aviation manufacturing or aerospace company * High volume manufacturing experience is a plus * Must have a high level of technical skills to perform job duties * Must be able to read blueprints and manufacturing instructions * Must have operational knowledge of basic measurement tools: scales & calipers We offer an attractive and competitive compensation/benefits package, which includes a profit-sharing bonus plan. Our work environment is comfortable, collaborative, and stimulating. Apply now to get started on a career with ACT! If you are looking for an opportunity to start a career with a growing company doing exciting and important work, please apply today! ACT is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a protected veteran, status as a qualified individual with a disability, or any other trait protected by law. E-verify employer. Salary Description $20.00 - $28.00

Job DescriptionAn electro-assembler will be required to wire equipment based upon electrical diagrams. The assembler will need to wire and assemble precisely, neatly, and with organization. Qualifications: Experienced in working with industrial control assemblies Read and understand electrical diagrams Mechanically inclined. Point to point wiring, high and low voltage Electrical component installation experience Equipment panel wiring experience Work independently and with a team Good communication skills Excellent attention to details Potentially some soldering Note: Applicants will be tested on their abilities FULL TIME: Rate: $20-$23/hour Schedule: Mon-Thurs, 6am-4:30pm

Spacecraft represent the most pressing unmet need across the entire aerospace industry. As more launch vehicles come online and the cost to orbit decreases, more companies launching payloads to space continue to emerge. For the first time in history, this influx of payload companies combined with reduced launch costs has resulted in a massive increase in need for commercial spacecraft platforms, known as satellite buses. These buses hold the payloads of our customers and are flown on launch vehicles. Apex manufactures these satellite buses at scale using a combination of software, vertical integration, and hardware that is designed for manufacturing. Our spacecraft enable the future of society: ranging from earth observation to communications and more. We'd love for you to join us on our mission of providing humankind access to the galaxy beyond our planet. About the Role Apex Space is seeking a highly skilled and experienced Spacecraft Technician to join our dynamic team. As a Spacecraft Technician, you will play a critical role in the assembly, integration, and testing of our spacecraft. Your expertise in aerospace structures, avionics, and harnessing will be essential in ensuring the successful development and deployment of our advanced space systems. Responsibilities: • Perform assembly, integration, and testing (AIT) activities for satellite and spacecraft development projects, following engineering specifications, procedures, and safety protocols. • Conduct structural assembly and integration tasks, including component installation, mechanical fastening, bonding, and precision alignment. • Integrate avionics systems, including electronic components, sensors, and wiring harnesses, ensuring proper connections, routing, and functionality. • Collaborate closely with engineers and other technicians to troubleshoot and resolve technical issues during assembly and integration activities. • Perform system-level functional tests, including electrical continuity, power distribution, communication, and sensor verification. • Utilize precision measurement tools and equipment to ensure adherence to dimensional requirements and alignment tolerances. • Participate in environmental testing, such as thermal vacuum, vibration, and shock testing, to validate satellite and spacecraft performance and durability. • Support the development and maintenance of assembly and integration procedures, work instructions, and quality documentation. • Ensure compliance with quality standards, industry best practices, and safety regulations throughout the assembly and integration process. • Maintain accurate records of assembly activities, test results, and any anomalies or discrepancies encountered. • Contribute to the continuous improvement of assembly and integration processes, recommending and implementing efficiency enhancements and quality improvements. • Stay updated with the latest advancements and best practices in satellite and spacecraft development and testing methodologies. Requirements: • U.S. Person status is required as this position needs to access export-controlled data. • Minimum 5+ years of experience in satellite or spacecraft assembly and integration, specifically in aerospace structures, avionics integration, and harnessing. • Proficiency in precision assembly techniques, including mechanical fastening, bonding, and alignment. • Strong understanding of aerospace electrical systems, avionics, and wiring harnesses. • Experience in conducting system-level functional tests and troubleshooting electrical and mechanical systems. • Familiarity with environmental testing methods, such as thermal vacuum, vibration, and shock testing. • Working knowledge of precision measurement tools and equipment used in satellite and spacecraft assembly and integration. • Familiarity with quality standards and processes related to aerospace manufacturing. • Ability to interpret engineering drawings, specifications, and technical documents. • Excellent attention to detail, with strong problem-solving and analytical skills. • Ability to work effectively in a team environment, collaborating with engineers and technicians. • Strong commitment to safety, always adhering to safety protocols and guidelines. • Excellent communication skills, with the ability to effectively convey technical information to team members and stakeholders. 2nd Shift Hours: 2PM-10:30PM + 10% shift differential Why Join Apex? Apex believes in creating a work environment that you look forward to embracing every day. Our employees love working at Apex, and we want you to love it too. We're a fast-growing startup backed by $200M in Series D funding, and we invest heavily in our people from day one. What We Offer For Full-time Employees: Shared upside: Receive equity in Apex, letting you benefit from the work you create Best-in-class healthcare: 100% company-paid medical, dental, and vision for you and your dependents, plus $100k life insurance at no cost Comprehensive PTO package to reset and recharge - starting at 15 days vacation, growing to 20+ days annually, plus 10 paid holidays Competitive 401(k) plan with generous matching - 100% match on first 3%, 50% on next 2% 8 weeks paid parental leave plus childcare reimbursement up to $350/day for work-related travel Daily catered lunch and unlimited snacks to keep you fueled throughout the day Vibrant community: Monthly office BBQs, pickleball tournaments, run club, and social gatherings for you and your family Your dream desk setup and all the tools you need to be your most productive self World-class Playa Vista office with EV chargers, with the benefit of in-person collaboration with amazing coworkers and flexibility to integrate work and life Real impact opportunity: Work alongside experts from aerospace, new space, and other cutting-edge industries to make a lasting difference Ready to join a team where your contributions matter and your future is bright? Let's build something extraordinary together. Equal Opportunity Employer Apex Technology, Inc. is an Equal Opportunity Employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. Candidates and employees are always evaluated based on merit, qualifications, and performance. We will never discriminate on the basis of race, color, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability, or any other legally protected status.