Carpenter jobs in Jesup, GA

Requirements Minimum Requirements: Minimum of one year's experience in the carpentry field required; two years' experience preferred. Ability to safely operate a variety of power tools, including but not limited to, skill saw, power drill, grinder, radial arm saw, jigsaw, and pneumatic nail gun. Ability to accurately read and interpret shop drawings and plans. Working knowledge of construction-related math. Excellent organizational skills. Ability to work as part of a team. Ability to communicate effectively with team members. Ability to accept and follow direction as provided by supervisors and ask questions when needed. Ability to work overtime as needed. Physical Demands: Ability to safely lift a minimum of 75 lbs. Ability to work in extreme weather, including but not limited to high heat, low temperature, and high sun environments. Ability to operate tools required to complete construction projects. Ability to sit, stand, stoop, and kneel as required to construct forms. Ability to kneel, stoop, crouch, or crawl.

Olgoonik is an Equal Opportunity Employer A Carpenter is defined as a craftsman with the skill and experience necessary to perform a variety of general construction activities. This position must be able to complete quality work in an efficient manner with little direction. Primary Responsibilities: Performs tasks on all areas and aspects of construction projects. Coordinates with Project Manager and/or Office Staff for material needed to complete work. Lays-out, measures, plans and executes work activities. Completes carpentry work to include steel stud and/or wood framing, drywall hanging and finish, dropped ceiling installation, hanging of doors, drilling and setting door hardware, demolition. Completes material take-offs to assist with estimating and material ordering as assigned. Reads blueprints and follows design specifications. Demonstrates proficiency in the use of a variety of both power and hand tools. Performs all other duties as assigned. Supervisory Responsibilities: There are no supervisory responsibilities associated with this position. Education and/or Experience: High School diploma or GED. Three years of applicable construction experienced. Knowledge, Skills, and Abilities: Must demonstrate a good attitude and ability to work as a member of a team. Self-motivation and the ability to work effectively under a minimum of supervision. Ability to multi-task efficiently, work in a fast-paced environment on multiple projects, and has strong attention for detail. Additional skills a plus. Certificates, Licenses, Registrations: Driver's License preferred. Security Clearance: MRPT Level Required Must be able to successfully complete a U.S. government administered investigation for an MRPT (Moderate Risk Public Trust). U.S. Citizenship is required. Must be able to maintain MRPT eligibility. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is required to be able to occasionally stand; walk; sit; use hands to finger, handle, or feel objects, tools or controls; operate vehicles and office equipment, reach with hands and arms; climb stairs; balance; stoop; kneel; talk or hear; taste or smell. The employee must occasionally lift and or move up to 50pounds for 50 feet. Job requires the ability to perform tasks on all areas and aspects of construction projects. Must be able to climb ladders for heights up to 60 feet and crawl for distances of 50 feet. Work Environment: Work is regularly performed indoors and outdoors in all types of weather conditions, including snow, rain, sleet, extreme winds, or ice storms. May be exposed to extreme temperatures, hot and cold, as part of environmental factors. Work may be performed near moving mechanical parts and/or vibration. May be required to work in areas where high noise hazards prevail. Olgoonik is an Equal Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy), national origin, age, disability, genetic information, veteran status, marital status, or any other characteristic protected by applicable federal, state, or local laws. As an Alaska Native corporation, Olgoonik provides hiring preference to Olgoonik shareholders, descendants, and their spouses to the extent allowed by law.

Travel: None Number of Openings: 1 Find a greater purpose with a team that puts people first. Baker Construction is the nation's top specialty concrete contractor. At Baker, you can count on steady work and reliable pay. When you finish one job, the next one is already lined up. You'll be able to provide for your family with confidence. Your hard work will pay off with more opportunities to train and advance. If you have grit and determination, you'll have the support you need to achieve your dreams. Apply today and be more with Baker. Summary The Carpenter Foreman I provides direction and supervision to assigned crew and determines when to delegate or actually perform the work. Is fully competent in all facets of construction, erecting, stripping, and/or repairing structures of steel, wood, or plywood using Carpenter's hand and power tools conforming to construction documents. Depending on staffing and circumstances, may function as back up to supervision on site. Roles and Responsibilities The Carpenter Foreman I will possess competency in the following areas in order to perform his/her role in a safe, productive, and effective manner. Note that the areas listed are intended to describe the general nature and level of work being performed by co-workers assigned to this role. They are not intended to be an exhaustive list of all the responsibilities, skills, efforts, or working conditions associated with this job. * Provides Direction to Assigned Crew * Installs Footing Forms * Builds and Installs Wall and Column Forms * Builds and Installs Structural Deck Forms * Sets Slab-on-Grade Forms * Preps and Sets Tilt-up/Precast Forms * Works with Building Layout * Ensures a Safe Work Environment * Participates in Training/Certifications Requirements * High School Diploma or equivalent and a minimum or 4 years of related experience and/or training, including reading and interpreting construction documents. At Baker Construction, we welcome those who are driven to make things happen. You'll earn great pay and benefits to protect you and your family and to plan for your future. We're also a company deeply rooted in values. We put people first, honor our word, and have the grit to get the job done. Go further with a team that will value and reward your grit. Baker is an EOE Disability/Veterans Employer. Applicants with physical and/or mental disabilities who require a reasonable accommodation for any or part of the application process may make their requests known by emailing ************************ or calling ************** and asking for HR. Nearest Major Market: Jacksonville

BL Harbert International is looking for a General/Finish Carpenter perform trim and general carpentry work, including cabinet making, framing, decking, window and stair customizations, crown molding, baseboard installations and occasional form carpentry. The ideal candidate has an aptitude for precision and can accommodate unique build requirements. Job Duties and Responsibilities * Perform finish and trim carpentry work according to plans and specifications * Measure, cut, and install various fixtures and millwork for doors, windows, ceiling panels, staircases, decking, furniture, etc. * Erect scaffolding or ladders as needed * Collaborate with other carpenters, journeymen, and supervisors to complete projects * Troubleshoot and repair issues with building components and equipment * Follow established regulations and advocate for safety on each worksite Job Requirements and Qualifications * High school diploma or GED certificate * Must have a minimum of 3 years Finish Carpenter experience in the Construction Industry * Blueprint reading skills * The ability to understand information, ideas, direction and then be able to perform the task or project discussed. Also, to be able to ask questions to insure you understand the information given. * Must have your own tools including: tap measure, carpenter square, pliers, tool bag * Able to use carpentry hand tools and power tools. * Physical stamina for lifting equipment and working at various heights and in tight spaces. BL. Harbert International is an EOE/Vets/Disabilities

JOMA Residential Carpenter Responsibilities: Report to the main office each morning for daily assignments Clock into each job and task separately in project management software Arrive at job sites and review assigned tasks Clarify instructions with the Production Team, if necessary Perform demolition, framing, siding, millwork, and cabinetry tasks as needed Communicate with other members of the Team Make a list of needed materials before they are needed Relay communication from the homeowner to the Production Team Communicate progress updates to the on-site Project Manager at the end of the day Protect, clean, and keep job sites safely organized daily Keep work vehicles clean and organized Maintain vehicle inventory of essential tools, supplies, and OSHA safety materials Attend OSHA safety meetings and complete all assigned training Requirements: At least 5 years experience in general construction and carpentry Experience in framing, decks, windows, doors, siding, and millwork Good communication skills and be willing to ask questions when in doubt Ability to read plans and scale off them as needed Ability to receive instructions and follow directions Ability to understand and utilize basic math skills Arrive to work in good hygiene and dressed appropriately Supply personal hand tools and basic cordless/electrical tools Good time management and the desire to grow professionally Ability to work independently or as part of a team with a positive attitude Clean driver's license, background check, and drug test Abide by OSHA safety protocol at all times Wear PPE when necessary Must report accidents and near-misses to the supervisor Basic experience with smartphones, texting, and emails Be able to spend the day standing, climbing, bending, and kneeling. Includes going into crawlspaces and attics Includes going up ladders and scaffolding up to 30' Be able to lift up to 70 pounds at a time Be able to work in a variety of weather conditions and terrains

**Requisition ID: 173238** Construct and repair structural woodwork and equipment in the yards, industrial and commercial property. **Experience Level** Skilled - Construct and repair structural wood work and equipment in the yard, industrial and commercial property - Work with materials such as wood, plastic, fiberglass, or drywall. - Utilize chisels, planes, saws, drills, and sanders to repair and erect structures. - Estimating sizes, distances, and quantities; or determining time, costs, resources, or materials needed to perform a work activity. - Inspect subordinate's work for compliance with the contract plans and specifications, point out deficiencies and explain and take any corrective action needed. **Qualifications** - May require a high school diploma or its equivalent with previous years of experience in the field or in a related area. - Must possess working knowledge skills and abilities for position. - Ability to understand, follow and transmit written and oral instructions and communicate effectively with management/supervision. - Ability to use hand tools, power tools and layout tools safe and efficiently. **Requirements** - Able to meet all physical requirements. - Must have all required tools - Expected to climb and work at heights and in confined spaces (may exceed 200 ft) - Able to work outdoors in all weather conditions - Able to work overtime, nights, and weekends as required by the workload - Observe and comply with all safety and project rules. Performs other duties as required. Equal Opportunity Employer, including disability and protected veteran status. Company: TIC_Craft

The role as a Carpenter Foreman is leading and monitoring installations while ensuring work is performed according to Clark Construction standards and specific project specifications. Foreman must work cooperatively the customer managing the project, project schedules and employees. A Foreman is responsible for maintaining productivity, quality control, labor cost, scheduling, safety, and acquisition of materials and any other activities that impact the success of completing a project. When necessary, the Foreman should be able to perform "hands on/ installation. **ESSENTIAL DUTIES AND RESPONSIBILITIES OF CARPENTER FOREMAN:** + Build rough wooden structures, such as concrete forms and scaffolds according to sketches, blueprints, or oral instructions. **Essential Functions:** + Alignment to Clark Standards of Excellence: Self-Motivated, Results Oriented, Adaptable, Team Player, Accountable, Ethical, Innovative, Resilient, Builds Relationships + Manage purchase orders and ensure ordered materials are received while adhering to bulk buy materials procedures. + Adhere to project contract document changes and any changes order along with Work Authorizations from Customer. + Fully utilize prefabrication and company-wide installation methods and policies. + Ensure the proper safety equipment, materials and tools are onsite to preform required work. + Equip General Superintendent with enough notice of any crew changes utilizing a Three Week Look ahead protocol. + Utilize a proactive and customer service approach to anticipate and resolve potential issues. Address the problem with a solution. + Ensure crew members start and finish work shift on time; Maintain proper meal/break times as per Employee Handbook and as legally required per California DIR labor laws and regulations. + Conduct effective performance evaluations of crew members. + Maintain complete and accurate "as-builts" as per procedures and project requirements. + Communicate effectively with a wide range of individuals including project owners, architects, general contractors, management, crew members, etc. **SKILLS AND EXPERIENCE:** + Study blueprints and diagrams to determine dimensions of structure or form to be constructed. + Measure materials or distances, using square, measuring tape, or rule to lay out work. + Cut or saw boards, timbers, or plywood to required size, using handsaw, power saw, or woodworking machine. + Assemble and fasten material together to construct wood or metal framework of structure, using bolts, nails, or screws. + Anchor and brace forms and other structures in place, using nails, bolts, anchor rods, steel cables, planks, wedges, and timbers. + Mark cutting lines on materials, using pencil and scriber. + Erect forms, framework, scaffolds, ladders, hoists, or roof supports, using hand tools, plumb rule, and level. + Bore bolt holes in timber, masonry or concrete walls, using power drill. + Assemble wood or metal forms for construction of columns and walls + Fabricate parts, using woodworking and metalworking machines. + Dig or direct digging of post holes and set poles to support structures. + Dismantle wall and column form **PHYSICAL DEMANDS: (minimum requirements as follows):** + Lift 50lbs from the ground and pull 50lbs of force. + Fully squat, stoop or kneel while wearing a 25lb tool belt. + Maintain a standing position for long periods of time while performing repetitive actions **Physical Demands** The physical demands described below are representative of those necessary for an employee to successfully perform the essential functions of this role on a construction site. This role requires significant physical exertion, including the ability to navigate active construction areas with uneven terrain, temporary and permanent stairs, ladders, scaffolding, and personnel hoists. Constant standing, walking, and performing repetitive physical tasks are required daily. The employee must frequently lift, carry, push, and pull materials and equipment weighing up to 50 pounds and occasionally lift and/or move objects weighing over 50 pounds with assistance or team lifting techniques. This position requires frequent bending, stooping, kneeling, crouching, climbing, and reaching (above and below shoulder level). The employee must possess sufficient physical dexterity and balance to work safely at various heights and in confined spaces. Visual acuity (including close, distance, peripheral, and depth perception, and the ability to adjust focus) is essential for tasks such as reading instructions, operating equipment, and ensuring safety. Adequate hearing (with or without assistive devices) is required to understand instructions and warnings in a noisy environment. **Work Environment** The work environment characteristics described below are representative of those an employee encounter while performing the essential functions of this role at a Clark Construction site. The employee will regularly work outdoors and may be exposed to varying and potentially extreme weather conditions, including heat, cold, wind, rain, and snow. The work environment frequently involves exposure to moving mechanical equipment, high noise levels, dust, fumes, airborne particles, vibrations, and potential electrical hazards. Work regularly occurs at heights and in confined spaces. The employee must be able to work safely around heavy equipment and construction traffic. The noise level in the work environment is typically loud, requiring the consistent use of appropriate personal protective equipment (PPE), including hearing protection, and adherence to all Clark Construction's comprehensive safety policies, procedures, and all applicable federal, state, and local laws. Due to the nature of the projects, deadlines, and client's requirements, the role frequently requires working more than 40 hours per week. Clark Construction Group is one of the largest building and infrastructure companies in the United States. Our portfolio spans every major building market, from public to private, corporate to cultural, education to entertainment, and the infrastructure connecting it all - power, transportation, water, and roadways. Since 1906, we've been delighting and delivering value to our clients and project partners, providing diverse opportunities for our team, and strengthening the communities where we live. With offices strategically located across the country, we pride ourselves on being a local builder with national reach. Learn more about Clark Construction (*********************************** . There is a sense of camaraderie that comes with delivering impactful projects as a team. It creates a sense of humility and fosters pride in the work we do. At Clark, we are proud to build what matters, together. Learn more about careers at Clark (****************************************** . Find even more opportunities with the Clark Group, our collection of companies - delivering construction and asset solutions for clients across the United States. Clark Group's capabilities span the entire asset lifecycle - from project development and financing to construction and facility maintenance. **_Asset Solutions_** **Altura Associates (********************************************* **Coda** **Edgemoor Infrastructure & Real Estate (************************************************ **S2N Technology Group** _Building & Infrastructure_ **Atkinson Construction (*********************************************** **Shirley Contracting Company** **C3M Power Systems (************************************************** **_Equal Opportunity Employer_** Clark Construction Group, LLC (and its subsidiaries and affiliates) is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to sex, race, color, age, national origin, religion, physical and mental disability, genetic information, marital status, sexual orientation, gender identity, citizenship, pregnancy or maternity, protected veteran status, or any other status prohibited by applicable national, federal, state or local law. Clark promotes a drug-free workplace. Applicants have rights under Federal Employment Laws: Family and Medical Leave Act (FMLA), Equal Employment Opportunity (EEO), and Employee Polygraph Protection Act (EPPA). Clark is committed to working with and providing reasonable accommodations to individuals with disabilities. If you need a reasonable accommodation because of a disability for any part of the employment process, please email ************************************ or call ************** and let us know the nature of your request and your contact information. **_Authorization to Work_** Applicants must be currently authorized to work in the US on a full-time basis in order to be considered. Equal Opportunity Employer: Clark Construction Group, LLC, (subsidiaries and affiliates) is an Equal Opportunity Employer committed to diversity and inclusion in the workplace. All qualified applicants will receive consideration for employment without regard to sex, race, color, age, national origin, religion, physical and mental disability, genetic information, marital status, sexual orientation, gender identity/assignment, citizenship, pregnancy or maternity, protected veteran status, or any other status prohibited by applicable national, federal, state or local law. Clark Construction promotes a drug-free workplace.

REPORTS TO: Foreman A skilled carpenter involved in high level millwork that can be woodwork, casework, and/or ornamental metalwork. Duties & Responsibilities Installation of AWW, PL + Metal casework, fume hoods, DFH, misc. specialties. Preplanning: tools needed, materials, installation techniques that is the fastest and safest way possible. Safety Responsibilities: Responsible to follow and participate in the ISEC Safety Program and adhere to the ISEC Safety Promise. Perform their jobs in the safest manner prescribed - Never put themselves in harm's way. Conduct themselves in a way that enhances their personal safety and that of their coworkers contributing to a positive work environment. Report workplace hazards and make suggestions for their control. Use Stop Work Authority and respect Stop Work Authority on job. Cooperate and contribute toward the overall success of the safety program. Report all injuries and incidents as soon as possible. Preferred Qualifications Education/Experience Experience in casework, plastic laminate, and architectural millwork Knowledge/Skills Ability to read blueprints Supply personal tools Ability to work with minimal supervision Minimum Qualifications Education/Experience High School Education or Equivalent 3-5 years' experience as a finished carpenter Union member where applicable Requirements: Workers should be able to: Physically, workers must be able to: Climb and maintain balance on ladders and scaffolds; Stoop, kneel, and crouch; Use hands and arms to reach for, handle, and manipulate objects; See well (either naturally or with correction); and lift and carry objects weighing up to 50 pounds.

Overview A Carpenter Journeyman performs basic installation of materials on a construction sites. Responsibilities Carpenter Journeyman typical responsibilities and duties include, but are not limited to the following: - Install items related to job site safety and functionality including safety rails, toe boards, ramps, temporary walls, temporary enclosures, elevator protection, decks for construction trailers - Build planning tables - Hang safety signs - Cover holes or open areas that are safety hazards - Mount Smartboards and TVs in job site trailers - Hang shelving in job site trailers - Reporting all safety incidents & injuries to Foreperson and Safety Leader - Any scope of work outside of they above listed, shall be planned, documented, and approved by Foreperson, Safety & Management Qualifications EXPERIENCE/EDUCATION - High school diploma or GED - 2+ years of carpentry experience - Or equivalent combination of education and experience - OSHA 10 hour certified recommended, (Next 150 Construction will assist with obtaining this certification if necessary) - Proof of certificates, degrees, etc. upon hire KNOWLEDGE, SKILLS & ABILITIES - Basic understanding of construction principles and procedures - Willingness to work in high-stress environment with extreme weather fluctuations - Ability to work in a team environment Next 150 Construction Services has an unwavering focus on safety, the environment and caring about everyone involved in our work. Qualified applicants who are offered a position must pass a pre-employment substance abuse test. Next 150 Construction Services is not accepting unsolicited resumes from third party recruiters at this time. Next 150 Construction Services is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to age, color, national origin, race, religion, sex, sexual orientation, gender identity, protected veteran status, or disability status. Submit your resume and create a profile for general considerations. Share with your Network! Do you know anyone in your network who might be interested in joining the Next 150 Team? Click here to refer them ConnectWithNext150

Job Description Watson Civil Construction, Inc. is a premier heavy/highway civil contractor working throughout Florida specializing in large site infrastructure, underground, and road work. We are seeking Dirt and Roadway Laborers for the Fort Myers area Benefits include: Competitive Salary PTO eligible after 90 days 6 paid holidays Health, dental, vision, life, STD, LTD after 60 days 401(k) match Watson Civil is a DFWP and EEO Employer. Watson Civil Construction is an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to age, race, color, religion, sex, national origin, disability status, genetics, protected veteran status, gender, gender identity or expression, sexual orientation, or any other characteristic protected by law. Job Type: Full-time Job Posted by ApplicantPro

Job Description We build custom homes, commercial building, remodeling, additions etc. Looking for Journeyman with pride in workmanship. Must have valid Drivers License, transportation and tools. Job intel's light framing, finish trim, remodel demolition, windows, doors and cabinets replacement. Team work, Quality, Pride, Cleanliness and Reliability is a must. Hours Monday thru Friday 7:30 to 4:00. We offer health insurance, dental, vision, etc. Job sites within a 45 mile radius of Punta Gorda.

SUMMARY Journeyman - Typically 3 years and above documented field experience in chosen craft discipline with ability to read and interpret instructions and document, plan and perform work activities independently. Constructs, fabricates, installs and dismantles form work of fixtures of metal, wood and other accessories. RESPONSIBILITES * Builds wooded structures, such as stairs, concrete forms, scaffolds, tunnel and sewer supports, and temporary frame shelters, according to blueprints, or oral instructions, and lays out and installs partitions and cabinet work. * Examines blueprints, sketches or building plans for to determine material required and dimensions of structure or fixture to be fabricated. * Selects, loads, and hauls job material to work site. * Prepares layout of form or fixture to be fabricated using lines or grades. * Measures boards, timbers, or plywood using square, measuring tape and ruler and marks cutting lines on materials using pencil and scriber. Shapes materials to required sizes using saws, chisels, and planes. * Verifies accuracy of structure with transit, plumb bob, square and level. * Uses carpentry hand tools such as hammers, levels, squares, screw drivers, adjustable, wrenches, hand and power saws, drill motors and pry bars. * Nails cleats (braces) across boards to construct concrete-supporting forms. * Braces forms in place with timbers, tie rods, and anchor bolts for use in building concrete piers, footings, and walls. * Erects frame work for structures and lays sub-flooring. * Cuts and assembles timbers to build trestles and cofferdams. * Erects scaffolding for buildings and other structures and installs ladders, handrails, walkways, platforms, and gangways. * Constructs forms, chutes, and aligns form panels for pouring concrete and grout. * Fits and installs pre-fabricated window frames, doors, weather stripping interior and exterior trim and finished hardware. * Fits and nails sheathing on outer walls and roofs of buildings. Sets and braces anchor bolts. * Performs minor maintenance or cleaning activities with tools and equipment. * Ability to tie rebar. * Operation of electric and pneumatic tools. * May rig materials. * Responsible for observing and complying with all safety and project rules. Performs other duties as required. Brown and Root Industrial Services also offers the following: * Opportunities for advancement. * Potential career growth into NCCER certified craft program with additional benefits of increase wages * Paid holidays and vacation * Elective medical, dental, vision, and supplemental benefits are available * Supplemental medical premium contributions for qualified positions. * Immediate 401(k) program with the employer matching the employee's first 3% contribution, and 50% of the employee's next 2% (vested immediately) * Employee Quarterly incentive bonus program Work Schedule is Monday-Thursday 4 10 hour days Shift Only JOB REQUIREMENTS * Work within precise limits or standards of accuracy. * Apply shop mathematics to solve problems. * Plan work and select proper tools. * Compare and see differences in the size, shape and form of lines, figures and objects. * Visualize objects in three dimensions from plans and drawings. * Make decisions based on measurable criteria. * Work at heights without fear. QUALIFICATIONS May require a high school diploma or its equivalent with previous years of experience in the field or in a related area. Has knowledge of commonly-used concepts, practices, and procedures within a particular field. Relies on instructions and pre-established guidelines to perform the functions of the job. Works under immediate supervision. Primary job functions do not typically require exercising independent judgment. Typically reports to a supervisor or manager. PHYSICAL REQUIREMENTS 1. Strength: a. Standing 60% Walking 20% Sitting 20% b. Lifting 50 lb. Carrying 50 lb. Pushing 70 ft-lb. Pulling 70 ft-lb. 2. Climbing F Balancing F 3. Stooping O Kneeling O Crouching O Crawling O Reaching C Handling C Fingering F EXPLANATION OF SYMBOLS NP Not Present O Occasionally (0-33%) F Frequently (34-66%) C Constantly (67-100%) Brown & Root Industrial Services is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, disability, sex, sexual orientation, gender identity or expression, age, national origin, veteran status, genetic information, union status and/or beliefs, or any other characteristic protected by federal, state, or local law. BENEFITS: Brown and Root offers a selection of competitive lifestyle benefits which include a 401K plan with company match, medical, dental, vision, life insurance, AD&D, flexible spending account, disability, paid time off, and flexible work schedule. We support career advancement through professional training and development.

Full-time Description Cornerstone Builders of SWFL is hiring a skilled and motivated Rough Carpenter to join our construction team. The ideal candidate will have experience framing walls, floors, residential remodeling. We are looking for dependable team players with a strong work ethic and attention to detail. Key Responsibilities: Demolition Measure, cut, and assemble wood and other materials according to specifications Build and install framing components for residential remodeling Read and interpret drawings, and project specifications Protection installation Trenching concrete Concrete foundation repairs/slab prep Use hand and power tools safely and effectively Ensure structures are level, plumb, and square Follow safety protocols and maintain a clean work area Communicate with project managers and other trades to ensure timely completion Requirements 2+ years of proven experience as a rough carpenter Strong knowledge of carpentry techniques, tools, and materials Ability to read drawings Ability to sit, stand, kneel, and climb ladders and lift up to 50lbs Clean driving record, ability to drive company vehicle Ability to work independently and as part of a team Experience working in residential remodeling

Job Description We are seeking an experienced and reliable Rough Carpenter to join our backside facilities team. The ideal candidate will be proficient in all aspects of rough carpentry, including framing, sheathing, and foundation work. They will be responsible for repairing barns, stables, and other various structures. A strong work ethic, attention to detail, and commitment to safety are essential for this role. Essential Duties and Responsibilities Construct, erect, and repair wooden frameworks and structures, including walls, floors, roofs, and door/window frames. Install sheathing, siding, and subfloors. Cut, shape, and install wood and other materials. Work with various hand and power tools, including saws, hammers, and nail guns. Ensure all work meets quality standards and building codes. Collaborate with other team members, including project managers and other tradespeople. Maintain a clean and safe work environment. Perform other duties as assigned. Qualifications High school diploma or GED preferred; completion of a carpentry apprenticeship program is a plus. Proven experience as a rough carpenter or similar role. Solid knowledge of carpentry techniques and methods. Proficiency in using hand and power tools. Ability to read and interpret blueprints and technical documents is a plus but is not required. Physical stamina and the ability to lift heavy materials. Excellent problem-solving and communication skills. Commitment to safety protocols. Adherence to safety protocols is essential when working with heavy machinery. Physical Demands and Work Environment The physical demands and work environment characteristics described are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit; use hands to finger, handle, or feel; reach with hands and arms; and talk or hear. The employee is occasionally required to stand; walk; climb or balance; and stoop, kneel, crouch, or crawl. The employee must occasionally lift and/or move up to 50-75 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. While performing the duties of this job, the employee is regularly exposed to risks associated with travelling between buildings and back and forth to other areas as may be required due to business demands. The employee may be exposed to the risks associated in attempting to resolve issues with extremely irate or difficult guests or staff members. The noise level in the work environment varies from light to moderate Licenses, Certifications, Registration: Requires a Professional Occupational License. Sunday through Thursday

Store - BRUNSWICK, GA Build customer relationships while creating a memorable framing solution for their art. Help customers shop our store and be able to find what they're looking for. Provide a safe, clean and clutter-free environment. Major Activities * Adhere to Standard Operating Procedures (SOP's) and Company programs to ensure compliance to applicable laws and requirements; execute Company policies and standards * Embrace and execute personal designer by using Elevated ABC Deliver to build relationships with all customers while creating Custom Framing solutions. * deliver sales and production results * Complete framing orders with a high degree of quality and on time * Maintain the ready made frame department and other assigned areas including SISO and Directed Replenishment * Deliver friendly customer service; help customers shop and find what they are looking for; provide a well merchandised and in-stock store for the customer to shop * Follow Standard Operating Procedures (SOPs) and Company programs * Support shrink and safety programs * Interacts with others in an accepting and respectful manner; remains positive and respectful, even in difficult situations; promotes commitment to the organization's vision and values; projects a positive image and serves as a role model for others * Participate in the truck un-load and stocking processes to ensure truck standards are followed and completed within budget * Operate cash register and execute cash handling to standards * Acknowledge customers, help locate product and provide solutions * Assist with Omni channel processes Other duties as assigned Minimum Type of experience the job requires * basic computer skills and basic measuring skills * ability to operate the framing equipment and glass cutter Preferred Type of experience the job requires * retail experience * Experience selling products and/or services to customers Physical Requirements * regular bending, lifting, carrying, reaching and stretching * ability to move throughout the store * ability to remain standing for long periods of time * lifting heavy boxes and frames and accessing high shelves by ladder or similar equipment * if you need help performing these functions of your job, please contact supervisor so that we may engage in the interactive process with you and find a reasonable accommodation Work Environment * public retail store setting taking care of our customers; all public areas are climate controlled; some stock rooms may not be climate controlled; some outdoor work if assigned to retrieve shopping carts or while unloading trucks; Frame shop contains glass cutter and heat press; work hours include nights, weekends and early mornings Applicants in the U.S. must satisfy federal, state, and local legal requirements of the job. At The Michaels Companies Inc., our purpose is to fuel the joy of creativity and celebration. As the leading destination for creating and celebrating in North America, we operate over 1,300 stores in 49 states and Canada and online at Michaels.com and Michaels.ca. The Michaels Companies, Inc. also owns Artistree, a manufacturer of custom and specialty framing merchandise. Founded in 1973 and headquartered in Irving, Texas, Michaels is the best place for all things creative. For more information, please visit ***************** At Michaels, we prioritize the wellbeing of our teams by providing robust benefits for both full-time and part-time Team Members. Our benefits include health insurance (medical, dental, and vision), paid time off, tuition assistance, generous employee discounts, and much more. For more information, visit ***************** Michaels is an Equal Opportunity Employer. We are here for all Team Members and all customers to create, innovate and be better together. Michaels is committed to the full inclusion of all qualified individuals. In keeping with this commitment, Michaels will assure that people with disabilities are provided reasonable accommodations. Accordingly, if a reasonable accommodation is required to fully participate in the job application or interview process, to perform the essential functions of the job, and/or to receive all other benefits and privileges of employment, please contact Customer Care at ************** (1800-MICHAEL). EEOC Know Your Rights Poster in English EEOC Know Your Rights Poster in Spanish EEOC Poster Optimized for Screen Readers Federal FMLA Poster Federal EPPAC Poster

As a 100% employee-owned contractor, when you work at Sundt, you're not just hiring on at a company, you're joining a culture. Because everyone at Sundt is part owner, you'll join a team of people who are deeply invested in their work. From apprentices to managers, we're passionate about the details and deliberate in everything we do. At Sundt we focus on building long-term prosperity for our clients, communities and employee-owners. We offer competitive pay, industry-leading benefits including a 401k and employee stock ownership plan, incentive programs for craft and administrative employees as well as training that focuses on your personal and professional growth. We're driven by skill, grit and purpose. Join us as we strive to be the most skilled builder in America Plan, lay-out and perform all types of Carpentry work in accordance with all applicable plans, specifications, codes, and industry standards. Work in other crafts at levels appropriate to training and skills as requested by project supervision. Job Summary Plan, lay-out and perform all types of Carpentry work in accordance with all applicable plans, specifications, codes, and industry standards. Work in other crafts at levels appropriate to training and skills as requested by project supervision. Key Responsibilities Maintain positive working relationships with all members of the crew. Produce high quality work, safely and productively at all times. Provide feedback to ensure all materials, tools, equipment and information is available for the work. Look for opportunities for improvement in all tasks, means and methods regarding the work and be willing to learn from others and continually seek opportunities to share knowledge and teach others. High proficiency in all related trade mathematics. Inspect subordinates work, ensure accuracy and compliance with plans and specifications, explain deficiencies and take any necessary corrective action. Eliminate WASTE such as waiting, rework, transporting, material storage and time. Minimum Job Requirements Must have a minimum of one year (level I), two years (level II), three years (level III) and four years (Sr.) experience in the industrial/commercial construction industry and have an in-depth understanding of the carpentry trade. Must be able to read and understand drawings, specifications, safety and quality standards and effectively utilize all trade tools and equipment relevant to the work. Possess effective verbal and written communication skills. Note: Job Description is subject to change at any time and may include other duties as assigned. Physical Requirements Work up to a 12 hour shift doing hard physical work in varying temperatures and outside conditions. Climb and maintain balance on steel/wood framework, stairs, ladders and scaffolds. Will lift, push or pull objects up to 50lbs. on an occasional basis Required to use hands to grasp, lift, handle, carry or feel objects on a frequent basis Must be able to comply with all safety standards and procedures May reach above shoulder heights and below the waist on a frequent basis May stoop, kneel, or bend, on an occasional basis Ability to wear personal protective equipment is required (including but not limited to; steel toed shoes, gloves, safety glasses, hearing protection, hardhat, vest, etc.) Move in and around confined, cluttered and uneven areas. May use telephone, computer system, email, or other electronic devices on a limited basis to communicate with internal and external customers or vendors Safety Level Safety-Sensitive Note: Jobs with the Safety-Sensitive designation are those that include tasks or duties that the employer reasonably believes could affect the safety and health of the employee performing the task or others such as operating a vehicle, operating equipment, operating machinery or power tools, repairing/maintaining the operation of any vehicle/equipment, the handling/disposal/transport of hazardous materials, or the handling/treatment/disposal of potentially flammable/combustible materials. Equal Opportunity Employer Statement: Sundt Inc. is an Equal Opportunity Employer (EOE) that values and respects the importance of a diverse and inclusive workforce. It is the policy of the company to recruit, hire, train and promote persons in all job titles without regard to race, religion, sex, sexual orientation, gender identity, color, age, disability, national origin, covered veteran status, or genetic information. We recognize that diversity and inclusion is a driving force in the success of our company. Benefits: Market Competitive Salary (paid weekly) Employee Stock Ownership Plan & 401K Industry Leading Health Coverage Starting after 60 days of continuous employment Sick Leave and Paid Time Off (PTO) Medical, Health Savings, and Wellness credits Flexible Spending Accounts Employee Assistance Program Workplace Wellness Programs Mental Health Program Life and Disability Insurance Employee-Owner Perks Educational Assistance Sundt Foundation - Charitable Employee-Owner's program

Overview A Carpenter Journeyman performs basic installation of materials on a construction sites. Responsibilities Carpenter Journeyman typical responsibilities and duties include, but are not limited to the following: - Install items related to job site safety and functionality including safety rails, toe boards, ramps, temporary walls, temporary enclosures, elevator protection, decks for construction trailers - Build planning tables - Hang safety signs - Cover holes or open areas that are safety hazards - Mount Smartboards and TVs in job site trailers - Hang shelving in job site trailers - Reporting all safety incidents & injuries to Foreperson and Safety Leader - Any scope of work outside of they above listed, shall be planned, documented, and approved by Foreperson, Safety & Management Qualifications EXPERIENCE/EDUCATION - High school diploma or GED - 2+ years of carpentry experience - Or equivalent combination of education and experience - OSHA 10 hour certified recommended, (Next 150 Construction will assist with obtaining this certification if necessary) - Proof of certificates, degrees, etc. upon hire KNOWLEDGE, SKILLS & ABILITIES - Basic understanding of construction principles and procedures - Willingness to work in high-stress environment with extreme weather fluctuations - Ability to work in a team environment Next 150 Construction Services has an unwavering focus on safety, the environment and caring about everyone involved in our work. Qualified applicants who are offered a position must pass a pre-employment substance abuse test. Next 150 Construction Services is not accepting unsolicited resumes from third party recruiters at this time. Next 150 Construction Services is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to age, color, national origin, race, religion, sex, sexual orientation, gender identity, protected veteran status, or disability status. Submit your resume and create a profile for general considerations. Share with your Network! Do you know anyone in your network who might be interested in joining the Next 150 Team? Click here to refer them ConnectWithNext150

SUMMARY Journeyman - Typically 3 years and above documented field experience in chosen craft discipline with ability to read and interpret instructions and document, plan and perform work activities independently. Constructs, fabricates, installs and dismantles form work of fixtures of metal, wood and other accessories. RESPONSIBILITES - Builds wooded structures, such as stairs, concrete forms, scaffolds, tunnel and sewer supports, and temporary frame shelters, according to blueprints, or oral instructions, and lays out and installs partitions and cabinet work. - Examines blueprints, sketches or building plans for to determine material required and dimensions of structure or fixture to be fabricated. - Selects, loads, and hauls job material to work site. - Prepares layout of form or fixture to be fabricated using lines or grades. - Measures boards, timbers, or plywood using square, measuring tape and ruler and marks cutting lines on materials using pencil and scriber. Shapes materials to required sizes using saws, chisels, and planes. - Verifies accuracy of structure with transit, plumb bob, square and level. - Uses carpentry hand tools such as hammers, levels, squares, screw drivers, adjustable, wrenches, hand and power saws, drill motors and pry bars. - Nails cleats (braces) across boards to construct concrete-supporting forms. - Braces forms in place with timbers, tie rods, and anchor bolts for use in building concrete piers, footings, and walls. - Erects frame work for structures and lays sub-flooring. - Cuts and assembles timbers to build trestles and cofferdams. - Erects scaffolding for buildings and other structures and installs ladders, handrails, walkways, platforms, and gangways. - Constructs forms, chutes, and aligns form panels for pouring concrete and grout. - Fits and installs pre-fabricated window frames, doors, weather stripping interior and exterior trim and finished hardware. - Fits and nails sheathing on outer walls and roofs of buildings. Sets and braces anchor bolts. - Performs minor maintenance or cleaning activities with tools and equipment. - Ability to tie rebar. - Operation of electric and pneumatic tools. - May rig materials. - Responsible for observing and complying with all safety and project rules. Performs other duties as required. Brown and Root Industrial Services also offers the following: Opportunities for advancement. Potential career growth into NCCER certified craft program with additional benefits of increase wages Paid holidays and vacation Elective medical, dental, vision, and supplemental benefits are available Supplemental medical premium contributions for qualified positions. Immediate 401(k) program with the employer matching the employee's first 3% contribution, and 50% of the employee's next 2% (vested immediately) Employee Quarterly incentive bonus program Work Schedule is Monday-Thursday 4 10 hour days Shift Only

JobID: 9001 JobSchedule: Full time JobShift: : As a 100% employee-owned contractor, when you work at Sundt, you're not just hiring on at a company, you're joining a culture. Because everyone at Sundt is part owner, you'll join a team of people who are deeply invested in their work. From apprentices to managers, we're passionate about the details and deliberate in everything we do. At Sundt we focus on building long-term prosperity for our clients, communities and employee-owners. We offer competitive pay, industry-leading benefits including a 401k and employee stock ownership plan, incentive programs for craft and administrative employees as well as training that focuses on your personal and professional growth. We're driven by skill, grit and purpose. Join us as we strive to be the most skilled builder in America Plan, lay-out and perform all types of Carpentry work in accordance with all applicable plans, specifications, codes, and industry standards. Work in other crafts at levels appropriate to training and skills as requested by project supervision. Job Summary Plan, lay-out and perform all types of Carpentry work in accordance with all applicable plans, specifications, codes, and industry standards. Work in other crafts at levels appropriate to training and skills as requested by project supervision. Key Responsibilities * Maintain positive working relationships with all members of the crew. * Produce high quality work, safely and productively at all times. * Provide feedback to ensure all materials, tools, equipment and information is available for the work. * Look for opportunities for improvement in all tasks, means and methods regarding the work and be willing to learn from others and continually seek opportunities to share knowledge and teach others. * High proficiency in all related trade mathematics. * Inspect subordinates work, ensure accuracy and compliance with plans and specifications, explain deficiencies and take any necessary corrective action. * Eliminate WASTE such as waiting, rework, transporting, material storage and time. Minimum Job Requirements * Must have a minimum of one year (level I), two years (level II), three years (level III) and four years (Sr.) experience in the industrial/commercial construction industry and have an in-depth understanding of the carpentry trade. * Must be able to read and understand drawings, specifications, safety and quality standards and effectively utilize all trade tools and equipment relevant to the work. * Possess effective verbal and written communication skills. Note: Job Description is subject to change at any time and may include other duties as assigned. Physical Requirements * Work up to a 12 hour shift doing hard physical work in varying temperatures and outside conditions. * Climb and maintain balance on steel/wood framework, stairs, ladders and scaffolds. * Will lift, push or pull objects up to 50lbs. on an occasional basis * Required to use hands to grasp, lift, handle, carry or feel objects on a frequent basis * Must be able to comply with all safety standards and procedures * May reach above shoulder heights and below the waist on a frequent basis * May stoop, kneel, or bend, on an occasional basis * Ability to wear personal protective equipment is required (including but not limited to; steel toed shoes, gloves, safety glasses, hearing protection, hardhat, vest, etc.) * Move in and around confined, cluttered and uneven areas. * May use telephone, computer system, email, or other electronic devices on a limited basis to communicate with internal and external customers or vendors Safety Level Safety-Sensitive Note: Jobs with the Safety-Sensitive designation are those that include tasks or duties that the employer reasonably believes could affect the safety and health of the employee performing the task or others such as operating a vehicle, operating equipment, operating machinery or power tools, repairing/maintaining the operation of any vehicle/equipment, the handling/disposal/transport of hazardous materials, or the handling/treatment/disposal of potentially flammable/combustible materials. Equal Opportunity Employer Statement: Sundt Inc. is an Equal Opportunity Employer (EOE) that values and respects the importance of a diverse and inclusive workforce. It is the policy of the company to recruit, hire, train and promote persons in all job titles without regard to race, religion, sex, sexual orientation, gender identity, color, age, disability, national origin, covered veteran status, or genetic information. We recognize that diversity and inclusion is a driving force in the success of our company. Benefits: Market Competitive Salary (paid weekly) Employee Stock Ownership Plan & 401K Industry Leading Health Coverage Starting after 60 days of continuous employment Sick Leave and Paid Time Off (PTO) Medical, Health Savings, and Wellness credits Flexible Spending Accounts Employee Assistance Program Workplace Wellness Programs Mental Health Program Life and Disability Insurance Employee-Owner Perks Educational Assistance Sundt Foundation - Charitable Employee-Owner's program