Computer operator jobs in Santa Cruz, CA

Suffolk is a national enterprise that builds, innovates and invests. Suffolk is an end-to-end business that provides value throughout the entire project lifecycle by leveraging its core construction management services with vertical service lines that include real estate capital investment, design, self-perform construction services, technology start-up investment (Suffolk Technologies) and innovation research/development. Suffolk - America's Contractor - is a national company with more than $5.0 billion in annual revenue, 2,600 employees, and main offices in Boston (headquarters), New York City, Miami, West Palm Beach, Tampa, Estero, Dallas, Los Angeles, San Francisco, and San Diego. Suffolk manages some of the most complex, sophisticated projects in the country, serving clients in every major industry sector, including healthcare, life sciences, education, gaming, transportation/aviation, government, mission critical and commercial. Suffolk is privately held and is led by founder, chairman and CEO John Fish. Suffolk is ranked #8 on ENR's list of “Top CM-at-Risk Contractors.” For more information, visit *************** and follow Suffolk on Facebook, Twitter, LinkedIn, YouTube, and Instagram. Position: Suffolk is currently seeking an Energy Marshall to implement learning, provide consistency, and drive rigor into energy isolation and electrical safety programs. Responsibilities: Reviewing the Electrical Energization Safety Program with the electrical contractor and commissioning authority Involvement with all stored energy systems - gas, water, steam, air. Organizing and scheduling Pre-Energization meetings Confirming individuals working on energized / de-energized equipment are Qualified Work based on NFPA 70E, OSHA, or an accepted qualified electrical safety training standard. Delivering a project specific Electrical Safety Orientation to employees who will be working on energized or de-energized equipment Reviewing the electrician's LOTO plan and verifying it is accurate and managed properly. Reviewing electrician and vendor AHA's. Confirming receipt of the approved coordination study and all arc flash labels have been applied to the equipment. Tracking and confirming all required QA/QC is complete and documentation has been submitted. Reviewing the daily Pre-Task Plan for energization activities. Implementing adequate communication to the project team that identifies daily high-risk activities, energized equipment and spaces, barriers, and off-limit spaces. Confirming all pre-energization steps have been completed. Conducting pre-energization daily walks with the electrician and project stakeholders. Performing end-of-day walks for electrical equipment to confirm all systems are secure. Confirming adherence to the LOTO plan and isolation requirements. Confirming adequate signage and barriers are installed for electrical rooms and spaces with energized equipment. Confirming an adequate access control plan is in place for electrical rooms and spaces with energized equipment. Qualifications: BA/BS + 5 years of related experience or demonstrated equivalency of experience and/or education Able to understand the safe installation of electrical equipment and various voltages, equipment types, and AC/DC systems Knowledge of pressurized mechanical lines, compressed gas and air. Experience in construction and electrical commissioning standards and practices. Experience communicating complex technical solutions and concepts to engineers and non-engineers. Ensure audit site practices against written standards as part of assurance role. Ability to Interpret line drawings and system redundancies to ensure design of LOTO systems are 100% effective and in compliance with customer standards. While performing the duties of this job, the employee is regularly required to sit for long periods of time; talk or hear; perform fine motor, hand and finger skills in the use of a keyboard, telephone, or writing. The employee is frequently required to stand; walk; and reach with arms and/or hands. Specific vision abilities include close vision, distance vision, depth perception and the ability to adjust focus. The employee will spend their time in an office environment with a quiet to moderate noise level. Job site walking. Suffolk provides equal employment opportunities to all employees and applicants for employment without regard to race, color, religion, sex, sexual orientation, pregnancy or maternity, national origin, citizenship, genetic information, disability, protected veteran, gender identity, age or any other status protected by law. This policy applies to recruiting, hiring, transfers, promotions, terminations, compensation, benefits, and all other terms and conditions of employment. Suffolk will not tolerate any unlawful discrimination toward, or harassment of, applicants or employees by anyone at Suffolk, or anyone working on behalf of Suffolk.

Provides on-site field support to customers including installation, and servicing and repairing systems and equipment. Verifies and approves operational quality of system equipment. Resolves customer issues in the areas of hardware installation, repair, upgrade and maintenance. Assists in investigating and resolving complex installations and maintenance matters of significance. Instructs customers in the operation and maintenance of systems/equipment. Ensures issues are referred to the appropriate personnel/service areas for follow up, testing and troubleshooting. Acts as a liaison with customers on administrative and technical matters for assigned projects. Performs analysis and prepares reports on system problem trends and issues. Troubleshoot user accounts Understanding of SCCM, VPN, Azure, O365, Windows 10 & 11

About Us: LTIMindtree is a global technology consulting and digital solutions company that enables enterprises across industries to reimagine business models, accelerate innovation, and maximize growth by harnessing digital technologies. As a digital transformation partner to more than 700+ clients, LTIMindtree brings extensive domain and technology expertise to help drive superior competitive differentiation, customer experiences, and business outcomes in a converging world. Powered by nearly 90,000 talented and entrepreneurial professionals across more than 30 countries, LTIMindtree - a Larsen & Toubro Group company - combines the industry-acclaimed strengths of erstwhile Larsen and Toubro Infotech and Mindtree in solving the most complex business challenges and delivering transformation at scale. For more information, please visit ******************** Job Title : Computer Hardware Technician Location : Santa Clara, CA Job Skills o Familiar with Intel computer server hardware architecture o Ability to assemble server systems using various hardware components o Ability to debug issues in server system bringup o Ability to socket CPUs flash BIOS install Operating Systems Windows Linux install Firmware and Drivers disk partitioning configuring networks and debug associated issues o Ability to configure KVMs network switches and storage arrays o Working knowledge of BIOS Firmware and Drivers and their interaction with Operating System etc o Ability to organize lab space and infrastructure for a given project network and power cabling test benchrack setup etc o Ability to do configuration changes at BIOSFirmware level o Familiar with scripting Python Shell etc o Ability to make minor changes to test automation scripts o Ability to setup test and measurement equipment Power meter Oscilloscope Logic analyzers protocol analyzers etc for a given test o Ability to Triage test data and debug test setup configuration related issues o Ability to communicate with various stake holders Validation Engineers Lab managers Other Expectations o Attention to detail and well organized o Ability to follow given instructions clearly o Able to lift 35 Lbs job may require shifting computers from one rack to another etc o Candidate should have reliable transportation and are OK with daily commute as it is 100 onsite work o Candidate must have good attitude communication skills o Willingness to learn

Exact compensation may vary based on several factors, including skills, experience, and education. Benefit packages for this role will start on the 31st day of employment and include medical, dental, and vision insurance, as well as HSA, FSA, and DCFSA account options, and 401k retirement account access with employer matching. Employees in this role are also entitled to paid sick leave and/or other paid time off as provided by applicable law. The ideal candidate will be responsible for planning, coordinating, and implementing projects within the decided-upon budget, timeline, and scope. They will also effectively monitor and present project updates to relevant stakeholders, clients, or project team members. Desktop Support Technician / PC Technician Duration: 4 month contract + extensions Target Start Date: ASAP Location: 5x a week on-site in San Diego CA Rate: 25-45HR Before the Move: - Inventory verification to ensure all items are accounted for. - Plan and phase the work with the move team to ensure alignment. - Verify Rubrik installation; install and test if missing. - Ensure active backups are in place. - Support in disconnecting and tagging lab PCs and accessories. - Follow GxP guidelines for any Qualified systems prior to disconnection. After the Move: - Set up PCs and replace keyboards and mice as needed. - Collaborate with external vendors for setup, including escorting them in the labs. - Work with end users to verify system functionality and obtain signoff. - Provide support for setting up Zebra printers and barcode scanners. - Update CMDB entries, retire, and archive data for systems not moved. - Transition to BAU (Business as Usual) support. REQUIRED SKILLS AND EXPERIENCE Experience with hardware setup and troubleshooting (PCs, keyboards, mice). Knowledge of backup systems and ability to verify active backups (e.g., Rubrik or similar). Familiarity with CMDB updates and asset lifecycle management. Ability to disconnect, tag, and reconnect lab PCs and accessories safely. Understanding of GxP guidelines for handling Qualified systems. Ability to follow data integrity and archival procedures for systems not moved. Great written and verbal communication skills NICE TO HAVE SKILLS AND EXPERIENCE Experience with Zebra printers and barcode scanners setup. Familiarity with Rubrik installation and testing beyond basic verification. Prior exposure to Business as Usual (BAU) transition in IT or lab environments. Understanding of lab-specific IT requirements and controlled access protocols.

Job Title: Level 2 PC Technician - Endpoint Deployment Hours: 7:30am-4:00pm We're supporting a growing enterprise environment in Los Angeles that is expanding its endpoint deployment and PC refresh operations. This is a hands-on, equipment-focused role ideal for someone who thrives in hardware, imaging, and deployment work-not traditional help desk or ticket-heavy support. If you enjoy building, imaging, staging, tagging, deploying, and troubleshooting desktop/laptop hardware, this is a strong fit. About the Role This position sits within a fast-moving endpoint deployment team responsible for preparing and deploying large volumes of desktops, laptops, and peripherals for enterprise and healthcare customers. Work is performed in a warehouse/endpoint lab environment, with additional opportunities to participate in field deployments (clinic and office refresh projects). This role is process-driven, hands-on, and physical. Candidates looking for networking, server work, or help desk call volume will not be a match. Key Responsibilities: Daily Hands-On Technical Work Perform laptop/desktop imaging & reimaging, BIOS updates, data wipes, and configuration Utilize SCCM, Microsoft Autopilot, and other deployment tools Complete component swaps, hardware repairs, device preparation, and quality checks Deployment & Asset Management Tag, label, box, and stage equipment for deployment Maintain accurate asset and inventory records Prep devices for large-scale endpoint refresh projects across clinics, offices, and enterprise environments Physical / Warehouse Work Operate in an endpoint lab/warehouse setting Lift, move, and stage PCs, monitors, printers, and peripherals Work repetitive technical tasks efficiently and consistently Requirements 2+ years of experience as a PC Technician, Deployment Tech, Desktop Tech, or IMAC Tech Strong proficiency with Windows 10/11, hardware diagnostics, and troubleshooting Experience with SCCM, Autopilot, MDT, or similar imaging tools Ability to work in a physically demanding, warehouse-style environment Comfortable with repetitive imaging and deployment workflows Reliable and punctual Spanish-speaking strongly preferred (supports certain Spanish-speaking user groups) Nice-to-Haves Experience with multi-site deployments (clinics, healthcare organizations, branch offices) Experience with asset tagging, inventory control, or warehouse IT operations

WELCOME TO COMPTECH Good people. Dedicated People. Hard-working people. CompTech is a service-oriented program management and technical company working to build lasting relationships with small and large companies, municipalities, and Government agencies. Headquartered in Dayton, OH, our clients nationwide are provided with services in client-focused practice areas resulting in solutions to organizational challenges. Job Description Job Title: Computer Operator Location: Tracy, CA (on-site) Supporting: The Defense Logistics Agency (DLA) **Secret Security Clearance** Overview CompTech is seeking a qualified Computer Operator to support the Defense Logistics Agency (DLA). The ideal candidate will assist in the technical operation and testing of fully integrated computer-based systems in a supervised environment. This position requires local travel using personal vehicle, company van, cart or other motorized vehicle. Scope of Work Key responsibilities include: Ultimate accountability for ensuring customer satisfaction at every level. Cultivate collaborative relationships with peers and leadership in a team focused environment, always communicating effectively and displaying diplomacy. Proven ability to effectively manage and prioritize a diverse workload of assigned service tickets. Flexible, with the ability to seamlessly transition from daily operations to project actions, and vice-versa. Demonstrated ability to quickly adapt to new policies and evolving technologies within this dynamic technical environment. Adept at interpreting and adhering to guidance and Standard Operating Procedures (SOPs) provided by contract and government leadership. Proficiency in operating a diverse range of system components, including hardware, software, and mass storage technology. Capability, under supervision, to operate communications-computer systems, as well as install, implement, maintain, and optimize operating systems, disk and tape management systems, and computer operations automation software. Anticipates problems, identifies deviations and acts through resolution. Perform other duties as required. Knowledge, Skills, and Certification Requirements: Excellent interpersonal and communication skills One (1) year of Help Desk or Deskside Support experience DLA CE Cert IA Role/Function: Help Desk Tier II & III - may be obtained upon hire Security+ CE Security Clearance Requirements: Secret Salary: $55k-60k Equal Employment Opportunity CompTech is committed to building a diverse and inclusive environment in which we recognize and value each other's differences as well as fostering a culture that promotes its core values: Commitment, Innovation, and Customer Satisfaction. As an equal opportunity employer, all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, genetic information, national origin, age, disability, or status as a protected veteran. If you require assistance or an accommodation due to a disability, please call Human Resources at ************** or email *****************************. A CompTech associate will respond to your message as soon as reasonably possible.

The FA-18C-F Flight Simulator Operator (Equivalent to Computer Operator II) reports directly to the Lead Operator. The Computer Operator II's specific job responsibilities included but are not limited to the following: Trainer operators shall set up all trainer requirements associated with training missions; respond within a designated time to instructor, trainee or inspector requirements for trainer operation and control in support of training missions; and be able to utilize full training capability of the device. Operators shall operate each console for insertion of flight variables, mission parameters and trainer malfunctions while exploiting the maximum capability of each tactical system. Trainer operators shall be responsible for communicating with Blue forces as they move into, onto and around Red Forces during simulated training scenarios involving air-to-air (A/A) intercepts and air-to-ground (A/G) strike mission training. Capable of researching and inserting various mission problems and trainee/trainer malfunctions while determining whether trainer response is correct. For unscheduled missions, trainer operators shall respond within five (5) minutes of notification by the instructor or Contracting Officers Representative (COR). Perform janitorial services on assigned spaces as required. Work any shift and weekends as specified by Contract for this site. Perform other tasks as assigned. Requires mental alertness and ability to follow written and verbal instructions given in English. Physical ability to walk, stand, and/or sit for extended periods of time, and to climb two (2) flights of stairs is required. Must present a professional appearance in demeanor and dress at all times. F/A 18 C-F Flight Simulator Weapons/Tactical Missions Operator II (Equivalent to Computer Operator II). Operator shall demonstrat e competence through satisfactory, progressive performance as a simulator operator. Operator shall demonstrate in depth working knowledge of training devices to include: proper set-up, operation and troubleshooting each type Instruction/Operator console, cockpit displays and controls, and flight characteristics. Must have an in-depth working knowledge and applications of the following simulated aircraft systems for each type device (list is minimum system requirements and may be modified by the Government at any time); Avionics Systems, Threat Systems, Tactical Sensors, Electronic Control Warfare, Sensors, Master Modes, Stores Management System (SMS), Communications / Navigations (COM/NAV), Navigational Flight Aides, AMU (Loading missions / Manipulating IC Sets), Device Integration (To include Virtual Exercises) and Fleet Readiness Squadron (FRS) / Syllabus Missions. Operator II shall demonstrate competence through satisfactory, progressive performance as a simulator operator.

Central Research Inc. is seeking to hire a Customer Service Representative to support our Federal Government customer. • Provide customer service to business owners by assisting with the application process for the SBA Restaurant Grant Program. • Handle inbound calls or make outbound calls to provide resolution to inquiries. • Troubleshoot business owner's technical issues and provide solution. • Help business owners navigate through the application and grant process. • Communicating through multiple channels, including but not limited to, phone, email, chat, and text. • Review system platform and provide business owners with accurate application status. • Respond to business owner's inquiries efficiently & timely. Minimum Qualifications: • High school diploma/GED required. • 1 year Customer Service Experience. Knowledge, Skills & Abilities: • Strong communication, both written and verbal. • Great active listening skills. • A patient and empathetic attitude. • Strong time management and organization skills. • Adaptability and flexibility. • Comfortable working in fast-paced environment. • Troubleshooting skills. • Computer literacy. • Excellent phone skills. • Advanced customer service skills. • Ability to maintain confidential information. Equal Opportunity Employer: Central Research is an Affirmative Action and Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, or protected veteran status and will not be discriminated against on the basis of disability. Click here to view the Equal Employment Opportunity Posters. If you'd like to view a copy of the company's affirmative action plan, please call ************. If you are an individual with a disability and would like to request a reasonable accommodation as part of the employment selection process, please contact our recruiting office at **************. This telephone line is reserved solely for job seekers with disabilities requesting accessibility assistance or an accommodation in the job application process. Please do not call about the status of your job application if you do not require accessibility assistance or an accommodation. Messages left for other purposes, such as following up on an application or non-disability related technical issues, will not receive a response. NOTE: This is not intended to be an exhaustive list of all duties, responsibilities or qualifications associated with the job. It is intended to describe the general nature and work responsibilities of the position. This job description and the duties of this position are subject to change, modification and addition as deemed necessary by the Company.

Job Description Responsibilities: This operator prepares complete sets of complex drawings or computer models that include multiple views, detail drawings, and assembly drawings. Drawings or models include complex design features that require considerable drafting skill to visualize and portray. Assignments regularly require the use of mathematical formulas to draw land contours or to compute weights, center of gravity, load capacities, dimensions, quantities of material, etc. Works from sketches, computer models, and verbal information supplied by an engineer, architect, or designer to determine the most appropriate views, detail drawings, and supplementary information needed to complete assignments. This operator selects required information from computer programs, and internet sites, precedents, manufacturers' catalogs, and technical guides. This operator independently resolves most of the problems encountered. Supervisor or design originator may suggest methods of approach or provide advice on unusually difficult problems. Education/Experience/Skills: U.S. Citizenship and Active DoD Secret Clearance. Must have certification/degree in AutoCAD. Minimum of 5 years' work drafting with AutoCAD in an engineering or similar environment. Proficiency with Microsoft Office Suite. Proficiency in use of AutoCAD software, Civil 3D experience is desired. Experience with gravity and pressure networks desired. Experience with feature line grading and corridors desired. Must have ability to stand, walk, sit, use both hands, and carry/lift to 50 lbs. Must be able to execute installation/lifting of heavy equipment and use of/climbing ladders. $45 Hr. What Your Experience Working for Us Will Be Like Ask any of our employees and they will tell you SSI is a great place to work with an upbeat and positive culture. We take pride in our work to continuously improve on our performance in a manner that enhances the mission of the agencies we serve while expanding opportunities for our employees and our company. About Synectic Solutions, Inc. (SSI) Synectic Solutions, Inc. (SSI), is an award-winning, 20-year government contracting agency focused on the areas of logistics, engineering, management, and information technology. SSI is a growing organization committed to exceeding customer expectations, to continually improving all products, services, and processes, and to perform all work with the commitment to upholding the highest standards and ethics. Ready to apply? If this job sounds like a fit for you, then click on the ‘apply' button below. Good luck! Powered by JazzHR ce49TGwlGN

Waymo is an autonomous driving technology company with the mission to be the world's most trusted driver. Since its start as the Google Self-Driving Car Project in 2009, Waymo has focused on building the Waymo Driver-The World's Most Experienced Driver-to improve access to mobility while saving thousands of lives now lost to traffic crashes. The Waymo Driver powers Waymo's fully autonomous ride-hail service and can also be applied to a range of vehicle platforms and product use cases. The Waymo Driver has provided over ten million rider-only trips, enabled by its experience autonomously driving over 100 million miles on public roads and tens of billions in simulation across 15+ U.S. states. Waymo's Compute Team is tasked with a critical and exciting mission: We deliver the compute platform responsible for running the fully autonomous vehicle's software stack. To achieve our mission, we architect and create high-performance custom silicon; we develop system-level compute architectures that push the boundaries of performance, power, and latency; and we collaborate closely with many other teammates to ensure we design and optimize hardware and software for maximum performance. We are a multidisciplinary team seeking curious and talented teammates to work on one of the world's highest performance automotive compute platforms. In this hybrid role, you will report to a Software Engineering Manager You will: * Identify important compute workloads for autonomous vehicles and understand their performance characteristics * Develop and maintain tests and tools for numerical correctness, become the main expert on ML numerics * Implement optimizations in compute workloads for the current and next-generation hardware/software stack * Build benchmarks and reduced workload applications to prototype and stress test the next-generation hardware/software stack * Collaborate with the broader software organization to ensure optimal and efficient use of next-generation compute platforms * Interact with hardware teams to provide key results and insights over the next-generation hardware design and decision making You have: * MS degree in Computer Science or Computer Engineering * Proficiency in C++ * In-depth knowledge of compute architecture, compiler, and operating system * A minimum of five years of professional or research experience in performance analysis and optimization We prefer: * GPGPU/accelerator programming * Knowledge of ML algorithms and their numerical properties. * Experience with software engineering in edge computing especially in autonomous vehicle #LI-Hybrid The expected base salary range for this full-time position across US locations is listed below. Actual starting pay will be based on job-related factors, including exact work location, experience, relevant training and education, and skill level. Your recruiter can share more about the specific salary range for the role location or, if the role can be performed remote, the specific salary range for your preferred location, during the hiring process. Waymo employees are also eligible to participate in Waymo's discretionary annual bonus program, equity incentive plan, and generous Company benefits program, subject to eligibility requirements. Salary Range $204,000-$259,000 USD We appreciate your interest in Waymo. Waymo is proud to be an equal opportunity employer, committed to creating a culture of belonging and maintaining a supportive workplace for all employees. We welcome applicants of all backgrounds, and employment decisions are based on a candidate's qualifications, experience, and alignment with job requirements and business needs. Waymo does not discriminate against, and prohibits harassment of, any applicant or employee based on race, color, sex, sexual orientation, gender identity, religion, national origin, age, disability, military status, family status, pregnancy, genetic information or any other basis protected by applicable law. Waymo will also consider for employment qualified applicants with criminal records in accordance with applicable law. Waymo is committed to making sure our hiring process is accessible for all candidates. If you need assistance applying for a role or participating in the interview process due to a disability, please let the recruiting team know or email *********************************. (This email address is intended to be used only for requesting accommodations as part of the application process. Other inquiries will not receive a response.)

This position is responsible for producing CAD drawings in accordance with company standards, client requirements, and project deadlines. ESSENTIAL FUNCTIONS: Develop computer generated drawings utilizing AutoCAD and Revit: plans, sections, details, schedules, and diagrams Computer model 2D and 3D HVAC (duct and pipe), plumbing, process pipe, controls, and electrical systems Research and recommend resolutions to drawing, spatial conflicts, and interferences Ensure that work complies with applicable specifications and CAD standards Attend meetings with client or Project Management/Engineering representatives when necessary to coordinate the design of the project Train and assist other CAD operators and engineers on how to use the drafting software and ACCO CAD standards Plot and assemble drawings, reports and other project documents Arrange for and expedite outside reproduction services Manage time to meet project schedules and task deadlines Effectively and professionally communicate with colleagues and project team members Other duties as assigned by Manager or Supervisor EDUCATION AND EXPERIENCE: Minimum 1 year CAD work experience Proficiency in AutoCAD, Revit, or similar drafting software ACCO COMPETENCIES: Proactivity / Initiative: Recognizes what needs to be done and accomplishes it in a manner appropriate for one's level/position and with minimal supervision. Perseverance: Shows the wherewithal to fight for difficult goals despite challenges and to bounce back from adversity. Insight: The ability to gather and make sense of information that suggests new possibilities. Engagement: Shows a knack for using emotion and logic to communicate a persuasive vision and connect with people. Teamwork: The ability to effectively work toward common goals with others by supporting, encouraging, and sharing information in an authentic and approachable manner. Big Picture: Understands and contributes to organizations' short- and long-term business strategy. On a personal level has independently developed a vision for short- and long-term career success. Motivation / Dedication: Commits to excellence in pursuing unselfish goals. Initiates action with collective goals takes responsibility and shows personal humility. Technical Curiosity / Willingness to Learn: Interest in seeking out new experiences, knowledge, and candid feed, back; demonstrating an openness to learning and change. Problem-Solver: Ability to identify, analyze, and solve a problem in support of personal, group, department, or organizational objectives. PHYSICAL REQUIREMENTS: (The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.) The employee may regularly lift and /or move up to 10 pounds, and occasionally lift and/or move up to 30 pounds. Specific vision abilities required by this job include Close vision and Distance vision. While performing the duties of this Job, the employee is regularly required to stand; use hands to finger, handle, or feel; reach with hands and arms and talk or hear. The employee is regularly required to walk and sit; climb or balance and stoop, kneel, crouch, or crawl (for purposes of assisting with project job walks and site inspections). The employee is occasionally required to reach above shoulder height to access storage cabinets and shelves. HOURS: Monday through Friday beginning between 6:00 am and 7:00 am and ending between 4:00 pm and 5:00 pm, with one hour for lunch. Eight hours per day is required, and occasional overtime may be necessary due to business needs. TRAVEL: O - 5% of the time to and from the assigned office location to regional branch offices and/or to project/customer site(s). COMPETITIVE WAGES: $26.33 to $36.15 per hour. Applicants please note that actual compensation is determined by several factors that are unique to each candidate, including but not limited to job-related skills, depth of experience, certifications, relevant education or training, and specific work location, among others. The offered wage or salary is only one aspect of an employee's total compensation. #ACCO #LI-MM1

Job Description The employee shall provide daily program support and operation of the NAVWAR/NIWC Pacific Message Center that supports 14 other Command units. The employee shall: Provide Naval Messaging support to all supported commands Maintain Message Center Defense Messaging System (DMDS)/and C2OIX Have knowledge of naval message writing format Track, test, and implement all messages and maintain profiler database for additions, deletions, and modifications to ensure timely and accurate delivery of all incoming and outgoing messages Prepare routine unclassified and classified messages for electronic delivery, and provide appropriate handling for special category (SPECAT), NATO, and Limited Distribution (LIMDIS) information Able to work hours such as 9:30am to 5:30pm Qualifications: 1+ years of experience as message and administrative support in a DoD environment Experience with Microsoft Office, including Outlook, Word, Excel, and PowerPoint Ability to communicate effectively with government and contractor personnel Familiar with Military protocol Must have ACTIVE Security clearance HS diploma or GED

About The Navys Advanced Electronics / Computer Field (AECF) offers extensive training in electronics, computer systems, radar, communications, and weapons fire control systems, including the Navys advanced missile systems and Aegis radar. These technicians are essential to the ships Combat Systems department, ensuring readiness for combat operations across the fleet. Responsibilities As an Electronics Technician (ET) or Fire Controlman (FC), you may: Maintain and repair radar, communication, and navigation equipment. Operate, maintain, and repair fire control radars, mainframe computers, large screen displays, LANs, weapon control consoles, and automatic gun systems. Troubleshoot and repair electro-mechanical systems used in weapons systems. Support combat systems readiness aboard aircraft carriers, Aegis cruisers, and other surface ships. Work Environment ETs and FCs serve on fleet units worldwide and at shore-based repair facilities. Expect assignments aboard ships, at remote stations, and in technical repair shops. Work is highly technical, requiring precision and teamwork. Training & Advancement Apprentice Technical Training Great Lakes, IL (11 weeks) FC Strand Great Lakes, IL (16 weeks) ET Strand Great Lakes, IL (22 weeks) Training covers electronics theory, radar systems, communications suites, missile and gun system ballistics, troubleshooting, and fiber optics. After A School, technicians may attend advanced C Schools. College credits are often available for Navy training. Education Opportunities Navy College Program & Tuition Assistance Post-9/11 GI Bill College credits via the American Council on Education Industry-recognized certifications through Navy COOL Department of Labor apprenticeships via USMAP Qualifications & Requirements U.S. citizen, eligible for security clearance Normal hearing and color perception Strong aptitude in math, computing, and electronics Ability to work as part of a team and perform detailed technical work Pay & Benefits Competitive salary Enlistment and re-enlistment bonuses Free health insurance & housing Retirement plan Paid training Required qualifications: 18 years or older Legally authorized to work in the United States RequiredPreferredJob Industries Government & Military

JLL empowers you to shape a brighter way. Our people at JLL and JLL Technologies are shaping the future of real estate for a better world by combining world class services, advisory and technology for our clients. We are committed to hiring the best, most talented people and empowering them to thrive, grow meaningful careers and to find a place where they belong. Whether you've got deep experience in commercial real estate, skilled trades or technology, or you're looking to apply your relevant experience to a new industry, join our team as we help shape a brighter way forward. Union Title: Union Utility Engineer What this job involves - The BMS Console Operator position is primarily responsible to monitor various computerized building automation systems to ensure that the systems are automatically operating within specified parameters (temperature, humidity, static pressure, schedules, amps, etc.). What is your day to day? Monitors the alarm screen of various BMS systems. Performs virtual tours looking for equipment running out of the design parameters or outside of the schedule. Works alongside the site mechanics and site BMS Engineers/HVAC techs on troubleshooting equipment issues and turning equipment on and off for maintenance. Monitors and dispatches alarms on various BMS systems. Performs Virtual Energy Tours using the sites BMS systems. Documents all changes to the BMS via an Electronic Document system. Notifies end users on the off hours regarding scientific equipment in alarm. Review the Pass down/ Emails and back to the last shift worked for awareness. Review Corrigo for any open Priority Work Orders Review all Alarm screens from the previous 24 hours. Review each site's Electronic White Board for any new entries from previous shifts. Ensure Virtual Tours are completed and documented. Ensure all training for each is completed on time. Simultaneously Monitor and Control multiple systems Mentor Operators on reviewing the BAS Systems and troubleshooting alarms. Review Emails to be sent out regarding issues from their shift and alarms. Escalate site BMS Alarms to the customer, BMS Building Manager, BAS Director, BAS Engineer, BAS SME Direct responses to major incidents impacting the site (s). Prioritize the response to critical alarms impacted by a site outage. Desired experience and technical skills Required 3 Years of relevant experience. High School Diploma or Equivalent. A general understanding of building automation systems with an emphasis on: (Siemens (Desigo/Insight, Honeywell EBI, Web CTRL Autologic, etc. Knowledge of commercial HVAC equipment and how it is controlled and alarmed in an industrial/commercial environment. Proficient in Word, Excel, and other Microsoft Office Suite programs. Ability to function effectively in a dynamic work environment. Ability to learn new concepts and ideas quickly. Must have strong written and verbal communication skills to effectively communicate with all customers. Must have excellent verbal and written communication skills as well as be able to multi-task. Ability to multi-task and work both in a team and independently. Able to sit for long periods of time. Preferred Trade School with an emphasis on HVAC desired. Specialized training/certification in BAS or HVAC Systems desired. Previous experience working in CMMS. This position does not provide visa sponsorship. Candidates must be authorized to work in the United States without employer sponsorship. Estimated compensation for this position: 83,428.00 - 83,428.80 USD per year This range is an estimate and actual compensation may differ. Final compensation packages are determined by various considerations including but not limited to candidate qualifications, location, market conditions, and internal considerations. Location: On-site -Mountain View, CA Job Tags: Google Jobs If this job description resonates with you, we encourage you to apply, even if you don't meet all the requirements. We're interested in getting to know you and what you bring to the table! Personalized benefits that support personal well-being and growth: JLL recognizes the impact that the workplace can have on your wellness, so we offer a supportive culture and comprehensive benefits package that prioritizes mental, physical and emotional health. Some of these benefits may include: 401(k) plan with matching company contributions Comprehensive Medical, Dental & Vision Care Paid parental leave at 100% of salary Paid Time Off and Company Holidays Early access to earned wages through Daily Pay JLL Privacy Notice Jones Lang LaSalle (JLL), together with its subsidiaries and affiliates, is a leading global provider of real estate and investment management services. We take our responsibility to protect the personal information provided to us seriously. Generally the personal information we collect from you are for the purposes of processing in connection with JLL's recruitment process. We endeavour to keep your personal information secure with appropriate level of security and keep for as long as we need it for legitimate business or legal reasons. We will then delete it safely and securely. For more information about how JLL processes your personal data, please view our Candidate Privacy Statement. For additional details please see our career site pages for each country. For candidates in the United States, please see a full copy of our Equal Employment Opportunity policy here. Jones Lang LaSalle (“JLL”) is an Equal Opportunity Employer and is committed to working with and providing reasonable accommodations to individuals with disabilities. If you need a reasonable accommodation because of a disability for any part of the employment process - including the online application and/or overall selection process - you may email us at ******************. This email is only to request an accommodation. Please direct any other general recruiting inquiries to our Contact Us page > I want to work for JLL. Pursuant to the Arizona Civil Rights Act, criminal convictions are not an absolute bar to employment. Pursuant to Illinois Law, applicants are not obligated to disclose sealed or expunged records of conviction or arrest. Pursuant to Columbia, SC ordinance, this position is subject to a background check for any convictions directly related to its duties and responsibilities. Only job-related convictions will be considered and will not automatically disqualify the candidate. California Residents only If you are a California resident as defined in the California Consumer Privacy Act (CCPA) please view our Supplemental Privacy Statement which describes your rights and disclosures about your personal information. If you are viewing this on a mobile device you may want to view the CCPA version on a larger device. Pursuant to the Los Angeles Fair Chance Initiative for Hiring Ordinance, JLL will consider for employment all qualified Applicants, including those with Criminal Histories, in a manner consistent with the requirements of applicable state and local laws, including the City of Los Angeles' Fair Chance Initiative for Hiring Ordinance. Pursuant to the San Francisco Fair Chance Ordinance, we will consider for employment qualified applicants with arrest and conviction records. Accepting applications on an ongoing basis until candidate identified.

Analytical Mechanics Associates (AMA) is seeking a skilled and experienced GPU Computing specialist to support the Launch Ascent and Vehicle Aerodynamics (LAVA) team within the Computational Aerosciences Branch (TNA) at NASA Ames Research Center (ARC) under the Aircraft Systems and Speceflight Engineering Support Servies (ASSESS) contract. The successful candidate will play a key role in advancing GPU acceleration, performance optimization, and feature development of the LAVA CFD solver suite - a high-performance computational fluid dynamics (CFD) solver framework used in mission-critical aerospace simulations. Primary Responsibilities Contribute to GPU optimization efforts for the LAVA Cartesian solver, focusing on MPI/C++/CUDA implementation Support enhancement of Wall-Modeled Large Eddy Simulation (WMLES) capabilities Implement and optimize new features for the adaptive mesh refinement framework Assist with hybrid parallelization strategies using MPI, CUDA, and OpenMP Help identify and resolve performance bottlenecks in computational workflows Create comprehensive technical documentation for code modifications and new features Assist users with software issues as we release the LAVA code to the broader community Collaborate with multidisciplinary scientific teams to address complex aerospace CFD problems Support simulation deployment across various computing environments, from workstations to supercomputers Required Qualifications Advanced degree in Computational Sciences or related field Experience with CUDA programming and GPU architecture optimization Knowledge of detailed CUDA optimization techniques (occupancy, registers, memory layout, etc.), and profilers (ncu and nsys) Strong C++ programming skills with experience in performance-critical applications Working knowledge of MPI and OpenMP parallel programming models Demonstrated ability to optimize scientific computing applications Candidates must have current U.S. work authorization. While preference is given to U.S. citizens and lawful permanent residents, we also welcome applications from individuals holding valid U.S. work visas (such as OPT, CPT, or other permissible categories). Preferred Qualifications Background in computational fluid dynamics or related scientific computing fields Knowledge of GPU computing on NVIDIA HPC architectures (eg A100, GH200) Experience with octree data structures and Cartesian AMR algorithms Experience working in diverse computing environments from workstations to HPC systems Nice to Have Knowledge and experience with ray tracing libraries (OptiX, OWL, Embree, etc.) for immersed boundary geometry queries Knowledge of FEM structural dynamics for fluid-structure interaction simulations Experience with performance portability layers Experience with non-NVIDIA GPU accelerators (AMD, Intel, etc.) Familiarity with cross-platform GPU development Familiarity with low-dissipation numerics for computational fluid dynamics Experience with multi-phase or multi-physics simulations Background in aerospace applications, particularly: Launch environment modeling Parachute/entry system dynamics Aerodynamic simulations of aircraft Project Context The successful candidate will join NASA's LAVA team as a contractor, working on software that has been applied to mission-critical problems including: Launch environment simulations for the Artemis program Entry system modeling, particularly parachute decelerator dynamics using FSI Scale-resolving Wall-Modeled Large Eddy Simulation for aeronautical applications This position offers the opportunity to advance cutting-edge GPU computing methodologies within a framework that directly impacts NASA's spaceflight and aeronautics missions. The LAVA code is run on a range of compute environments from workstations to supercomputers, requiring flexibility and expertise in various deployment scenarios. Salary range: $125k-$165k DOE Analytical Mechanics Associates (AMA) is proud of our customer relationships, our diverse and dynamic work environment, and our employees' career satisfaction. AMA is a small business with a wide reach; headquartered in Hampton, VA, AMA has operations in Greenbelt, MD; Huntsville, AL; Dallas and Houston, TX; Denver, CO; Mountain View, CA; and Edwards Air Force Base, CA. With over 60 years of experience, AMA specializes in aerospace engineering, science, analytics, information technology, and visualization solutions. AMA combines the best of engineering, science, and mathematics capabilities with the latest in information technologies, visualization, and multimedia to build creative solutions. We offer competitive salaries and a substantial benefits package, including but not limited to paid personal and federally recognized holiday leave, salary deferrals into a 401(k)-matching plan with immediate vesting, tuition reimbursement, short/long term disability plans, and a variety of medical, dental, and vision insurance options. AMA is committed to the professional growth of every employee, understanding that the successes of our employees drive our success. We provide a work environment that is engaging, collaborative, and supportive. To learn more about our company, please visit our website at *********************** and follow us on Facebook and LinkedIn. AMA is an Affirmative Action/Equal Opportunity Employer and does not discriminate against any applicant for employment or employee because of race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, protected veteran status, or any other characteristic prohibited under federal, state, or local laws.

Job Title: Computer Programmer Role: Information Technology Industry: I.T. Job Type: Permanent full-time Job description: Position Summary: Primarily responsible for database programming. General Purpose: Computer programming, system support; Client relations; problem resolution; critical thinking; database maintenance; relationship building Essential Duties and Responsibilities: * Design and develop SQL stored procedures to automate workflows and/or optimize application performance * Requirements gathering, database design, business logic development, application integration, software deployment and maintenance of existing systems * Develop SQL procedures/functions * Compile and write documentation of program development and subsequent revisions, inserting comments in the coded instructions so others can understand the program * Conduct trial runs of new program applications to be sure they will produce the desired information and that the instructions are correct * Correct errors by making appropriate changes and then rechecking the program to ensure that the desired results are produced * Consult with manager to clarify program intent, identify problems, and suggest changes * Perform revision, repair, or expansion of existing programs to increase operating efficiency or adapt to new requirements * Perform ad-hoc requests for data manipulations, imports, exports, and updates * Establish and maintain interpersonal relationships by way of developing constructive and cooperative working relationships with others, and maintaining them over time * Attend client, department and company meetings * Comply with federal and state laws, company and department policies and procedures * All other duties as assigned Essential Skills and Experience: * BS in Computer Science, Computer Engineering, Information Technology, Computer Information Systems or other technical discipline and/or related development experience using Microsoft technologies * Experience with SQL Server 2008/2008R2 (including SQL Server Analysis Services; SQL Server Integration Services; SQL Server Reporting Services, TSQL, cursers, triggers, stored procedures, views, etc.) * Experience developing and maintaining databases using the Microsoft Business Intelligence Stack within SQL Server * Experience testing, debugging and documenting systems * Familiarity with general computer use, computing theory and systems analysis methodologies * Experience in .NET web-service frameworks (WCF, SOAP, MVC, Web API, etc.) * Excellent work ethic, dependable and responsible * Strong logical and creative problem-solving skills, good oral and written communication skills and excellent analytical skills * Commitment to company values Nonessential Skills and Experience: * Microsoft Certified in Business Intelligence * Experience of agile software methodologies and test driven development Bottom Line Requirements: 1. BS in Computer Science, Computer Engineering, Information Technology or related preferred. 2. Development experience using Microsoft technologies including SQL Server 2008/2008R2 and C#. 3. Experience developing and maintaining databases using the Microsoft Business Intelligence Stack within SQL Server. 4. Experience in .NET web-service frameworks. Additional Information All your information will be kept confidential according to EEO guidelines.

Waymo is an autonomous driving technology company with the mission to be the world's most trusted driver. Since its start as the Google Self-Driving Car Project in 2009, Waymo has focused on building the Waymo Driver-The World's Most Experienced Driver™-to improve access to mobility while saving thousands of lives now lost to traffic crashes. The Waymo Driver powers Waymo's fully autonomous ride-hail service and can also be applied to a range of vehicle platforms and product use cases. The Waymo Driver has provided over ten million rider-only trips, enabled by its experience autonomously driving over 100 million miles on public roads and tens of billions in simulation across 15+ U.S. states. Waymo's Compute Team is tasked with a critical and exciting mission: We deliver the compute platform responsible for running the fully autonomous vehicle's software stack. To achieve our mission, we architect and create high-performance custom silicon; we develop system-level compute architectures that push the boundaries of performance, power, and latency; and we collaborate closely with many other teammates to ensure we design and optimize hardware and software for maximum performance. We are a multidisciplinary team seeking curious and talented teammates to work on one of the world's highest performance automotive compute platforms. In this hybrid role, you will report to a Software Engineering Manager You will: Identify important compute workloads for autonomous vehicles and understand their performance characteristics Develop and maintain tests and tools for numerical correctness, become the main expert on ML numerics Implement optimizations in compute workloads for the current and next-generation hardware/software stack Build benchmarks and reduced workload applications to prototype and stress test the next-generation hardware/software stack Collaborate with the broader software organization to ensure optimal and efficient use of next-generation compute platforms Interact with hardware teams to provide key results and insights over the next-generation hardware design and decision making You have: MS degree in Computer Science or Computer Engineering Proficiency in C++ In-depth knowledge of compute architecture, compiler, and operating system A minimum of five years of professional or research experience in performance analysis and optimization We prefer: GPGPU/accelerator programming Knowledge of ML algorithms and their numerical properties. Experience with software engineering in edge computing especially in autonomous vehicle #LI-Hybrid The expected base salary range for this full-time position across US locations is listed below. Actual starting pay will be based on job-related factors, including exact work location, experience, relevant training and education, and skill level. Your recruiter can share more about the specific salary range for the role location or, if the role can be performed remote, the specific salary range for your preferred location, during the hiring process. Waymo employees are also eligible to participate in Waymo's discretionary annual bonus program, equity incentive plan, and generous Company benefits program, subject to eligibility requirements. Salary Range$204,000-$259,000 USD

Suffolk is a national enterprise that builds, innovates and invests. Suffolk is an end-to-end business that provides value throughout the entire project lifecycle by leveraging its core construction management services with vertical service lines that include real estate capital investment, design, self-perform construction services, technology start-up investment (Suffolk Technologies) and innovation research/development. Suffolk - America's Contractor - is a national company with more than $5.0 billion in annual revenue, 2,600 employees, and main offices in Boston (headquarters), New York City, Miami, West Palm Beach, Tampa, Estero, Dallas, Los Angeles, San Francisco, and San Diego. Suffolk manages some of the most complex, sophisticated projects in the country, serving clients in every major industry sector, including healthcare, life sciences, education, gaming, transportation/aviation, government, mission critical and commercial. Suffolk is privately held and is led by founder, chairman and CEO John Fish. Suffolk is ranked #8 on ENR's list of “Top CM-at-Risk Contractors.” For more information, visit *************** and follow Suffolk on Facebook, Twitter, LinkedIn, YouTube, and Instagram. Position: Suffolk is currently seeking an Energy Marshall to implement learning, provide consistency, and drive rigor into energy isolation and electrical safety programs. Responsibilities: Reviewing the Electrical Energization Safety Program with the electrical contractor and commissioning authority Involvement with all stored energy systems - gas, water, steam, air. Organizing and scheduling Pre-Energization meetings Confirming individuals working on energized / de-energized equipment are Qualified Work based on NFPA 70E, OSHA, or an accepted qualified electrical safety training standard. Delivering a project specific Electrical Safety Orientation to employees who will be working on energized or de-energized equipment Reviewing the electrician's LOTO plan and verifying it is accurate and managed properly. Reviewing electrician and vendor AHA's. Confirming receipt of the approved coordination study and all arc flash labels have been applied to the equipment. Tracking and confirming all required QA/QC is complete and documentation has been submitted. Reviewing the daily Pre-Task Plan for energization activities. Implementing adequate communication to the project team that identifies daily high-risk activities, energized equipment and spaces, barriers, and off-limit spaces. Confirming all pre-energization steps have been completed. Conducting pre-energization daily walks with the electrician and project stakeholders. Performing end-of-day walks for electrical equipment to confirm all systems are secure. Confirming adherence to the LOTO plan and isolation requirements. Confirming adequate signage and barriers are installed for electrical rooms and spaces with energized equipment. Confirming an adequate access control plan is in place for electrical rooms and spaces with energized equipment. Qualifications: BA/BS + 5 years of related experience or demonstrated equivalency of experience and/or education Able to understand the safe installation of electrical equipment and various voltages, equipment types, and AC/DC systems Knowledge of pressurized mechanical lines, compressed gas and air. Experience in construction and electrical commissioning standards and practices. Experience communicating complex technical solutions and concepts to engineers and non-engineers. Ensure audit site practices against written standards as part of assurance role. Ability to Interpret line drawings and system redundancies to ensure design of LOTO systems are 100% effective and in compliance with customer standards. While performing the duties of this job, the employee is regularly required to sit for long periods of time; talk or hear; perform fine motor, hand and finger skills in the use of a keyboard, telephone, or writing. The employee is frequently required to stand; walk; and reach with arms and/or hands. Specific vision abilities include close vision, distance vision, depth perception and the ability to adjust focus. The employee will spend their time in an office environment with a quiet to moderate noise level. Job site walking. Suffolk provides equal employment opportunities to all employees and applicants for employment without regard to race, color, religion, sex, sexual orientation, pregnancy or maternity, national origin, citizenship, genetic information, disability, protected veteran, gender identity, age or any other status protected by law. This policy applies to recruiting, hiring, transfers, promotions, terminations, compensation, benefits, and all other terms and conditions of employment. Suffolk will not tolerate any unlawful discrimination toward, or harassment of, applicants or employees by anyone at Suffolk, or anyone working on behalf of Suffolk.

One of Insight Global's largest pharmaceutical customers is looking for a PC technician local to La Jolla, CA to assist in moving their IT lab and all of its equipment. This person will be essential both before and after the move. Responsibilities listed below; Before the Move: - Inventory verification to ensure all items are accounted for. - Plan and phase the work with the move team to ensure alignment. - Verify Rubrik installation; install and test if missing. - Ensure active backups are in place. - Support in disconnecting and tagging lab PCs and accessories. - Follow GxP guidelines for any Qualified systems prior to disconnection. After the Move: - Set up PCs and replace keyboards and mice as needed. - Collaborate with external vendors for setup, including escorting them in the labs. - Work with end users to verify system functionality and obtain signoff. - Provide support for setting up Zebra printers and barcode scanners. - Update CMDB entries, retire, and archive data for systems not moved. - Transition to BAU (Business as Usual) support. REQUIRED SKILLS AND EXPERIENCE Experience with hardware setup and troubleshooting (PCs, keyboards, mice). Knowledge of backup systems and ability to verify active backups (e.g., Rubrik or similar). Familiarity with CMDB updates and asset lifecycle management. Ability to disconnect, tag, and reconnect lab PCs and accessories safely. Understanding of GxP guidelines for handling Qualified systems. Ability to follow data integrity and archival procedures for systems not moved. Great written and verbal communication skills NICE TO HAVE SKILLS AND EXPERIENCE Experience with Zebra printers and barcode scanners setup. Familiarity with Rubrik installation and testing beyond basic verification. Prior exposure to Business as Usual (BAU) transition in IT or lab environments. Understanding of lab-specific IT requirements and controlled access protocols.