Duncan Aviation Internships - 549 jobs

The Interior Intern, under immediate supervision, learns and gains competency according to customer specifications and Duncan Aviation approved procedures in a safe and organized work area in one, or a combination, of the following shops: Finish, Cabinet, Interior Completions, Upholstery or Sewing. This position maintains and cleans shop equipment; organizes shop and hangar areas; and completes appropriate documentation in timely manner. Essential Job Functions 1. Under immediate supervision, performs a range of job functions in the Interior department. Finish: * Prepares cabinet surfaces and substrates for paint or finish and miscellaneous plastic, metal and leather parts for paint or dye to customer satisfaction and Duncan Aviation approved procedures using appropriate equipment. * Applies stains, dyes, paints or finishes to prepared parts. Mixes paint and stains as needed. * Performs basic detail work, polish and clean-up on finished items. Cabinet: * Laminates, re-laminates, repairs and modifies existing aircraft cabinets to customer satisfaction and Duncan Aviation approved procedures using appropriate equipment. * Reads blue prints and builds new cabinet parts per blueprints. Orders necessary parts as required. * Performs specialty work using plexi-glass, mirrors and sheet metal products. Interior Completions: * Removes and installs interiors including carpeting, insulation, soundproofing, fabric accessories, etc. in aircraft using hand tools according to Duncan Aviation approved procedures. * Strips materials, preps and repairs panels. Recovers flat work and accessories using various fasteners and hand tools. * Prepares and paints and dyes miscellaneous plastic, metal and leather parts. Upholstery/Sewing: * Prepares seats for upholstering by stripping all foam and covers using various hand tools according to standard operating procedures. * Disassembles, prepares, repairs, recovers and reassembles seats, miscellaneous seat parts, flatwork including minimal sewing, and accessories for paint. * Cleans glue off panels and strips materials from parts. * Foams small chair parts (i.e. armrests, headrests, shell, etc.). * Uses sewing instruction manuals to sew kit and core seat covers, small seat parts and miscellaneous items (i.e. armrests, headrests shells, curtains, control boots, flight deck armrest and pouches, wind laces, glare shields and crash pads, covers on burn cushions, etc.) for various makes and models of aircraft. * Patterns small seat parts and miscellaneous items (i.e. armrests, headrests, shells, curtains, control boots, light deck armrest and pouches, wind laces, glare shields and crash pads, etc.). 2. Under immediate supervision researches, prepares, and signs off various documents for record keeping purposes as required by Duncan approved procedures, manufacturers' maintenance manuals, and FAA regulations (i.e. turnovers, removal sheets, flammability testing, W.O. Sheets, personal training log, and other work order related documents supporting the review squawks and expected hours). 3. Performs other related duties as assigned by management. Job Specific Requirements * Licenses/Certificates: Valid driver's license and acceptable driving record; Respirator Fit qualified * Attendance: Regularly scheduled attendance required * Physical: Routinely lifts 50 lbs., occasionally 100 lbs.; reads small print; hears sounds associated with mechanical deficiencies; repetitive motion; works with moving parts and vibration; tolerates working in confined spaces and heights above four feet; tolerates products and materials associated with component maintenance; tolerates standing, walking, bending, kneeling, stooping, crouching, crawling, climbing and sitting * Environmental: Tolerates working in extreme temperatures and noisy environments Education and Experience * High School or College student * Minimum six months related experience preferred Duncan Aviation is an Equal Opportunity and Affirmative Action Employer. EOE Minorities/Females/Protected Veterans/Disabled

Full-time Description Leadership Development Program: Launch Your Management Career Budget's 16-month accelerated leadership program is designed to fast-track ambitious recent college graduates into senior management and executive roles at the nation's largest and most successful rental car franchise. As a selected participant, you'll be based in one of our dynamic locations across seven key cities in the Southeast, Midwest, or Mountain West regions-offering the perfect blend of professional growth and vibrant lifestyle opportunities. We're seeking highly motivated, ambitious, and entrepreneurial individuals ready to dive in and make an impact. You'll receive a comprehensive, personalized development plan with hands-on rotations across all departments, providing invaluable firsthand insight into our end-to-end operations. This forward-thinking program is built to rapidly build the strategic knowledge, leadership skills, and business acumen essential for critical senior management and executive positions. It's a rare chance to "earn your stripes from the ground up" in an intensive, condensed timeframe-gaining real-world experience that sets you apart in the industry. Highlights include frontline operations immersion, plus exclusive travel to Salt Lake City, UT, and our corporate headquarters in Atlanta, GA, where you'll collaborate directly with our executive team on high-level strategy and leadership training. Key Rotations and Responsibilities Gain diverse, practical experience across core functions: - Logistics: Track and optimize vehicle fleet movements based on demand forecasting; deliver exceptional customer assistance and coordinate seamless roadside support. - Revenue Management: Leverage data analytics to predict customer demand, dynamically adjust pricing strategies, and drive revenue growth. - Vehicle Maintenance, Repair & Remarketing: Conduct thorough damage assessments, manage vendor partnerships for repairs, and prepare vehicles for high-value remarketing. - **Operations & Asset Control**: Elevate the customer experience through frontline transactions; expertly upsell products and services to boost sales; perform professional vehicle detailing; resolve customer issues with empathy and efficiency; and oversee inventory controls and asset management processes. - Recruiting & Talent Acquisition: Source top talent, review applications, and represent the company at campus events and career fairs to build our future team. - Administration & Human Resources: Partner with executives on strategic initiatives while supporting key departments, including HR, accounting, claims, fleet management, and training & development. If you're a driven recent graduate eager to kickstart a rewarding management career with rapid advancement, unparalleled mentorship, and real responsibility from day one-this is your opportunity to lead the way in a thriving industry. Apply today and accelerate your future! Requirements · Flexible schedule including some travel (various shifts include days, evenings, weekends, and some holidays) · 21+ years of age · 4-year degree · Strong understanding of business management, financial, & leadership principles · Excellent communication, interpersonal, leadership, & conflict resolution skills · Highly motivated and self-disciplined Benefits · Medical, Dental, & Vision · 401K · Paid Time Off · Healthy Work/Life Balance · Bonus & advancement potential based on merit

Job Description Virginia Spaceport Authority Internship Program gives students the chance to apply their education to real-world challenges through meaningful, hands-on projects. Top candidates are well-rounded students from a variety of backgrounds who demonstrate inquisitiveness, team-orientation, excellence, and resilience. At the time you apply for this announcement, you must be a degree seeking student who is enrolled or accepted for enrollment in an accredited educational institution on at least a half-time basis. SUMMARY General Description: The Financial Analyst Intern will support the finance and accounting teams in analyzing financial data, preparing reports, and contributing to key business decisions. This role provides a hands-on learning opportunity for a motivated individual to gain practical experience in financial analysis, budgeting, forecasting, and process improvement initiatives. The intern will assist with tasks such as reconciling financial discrepancies, preparing variance analyses, and creating dashboards to track financial performance metrics. Additionally, the Financial Analyst Intern will collaborate with cross-functional teams, participate in financial planning meetings, and help drive insights that enhance operational efficiency and financial health. This position is ideal for a detail-oriented and analytical individual with a strong interest in financial management and business strategy. The intern will develop critical thinking skills and gain exposure to the tools, systems, and processes utilized by finance professionals in a dynamic business environment. Responsibilities and Duties: Financial Data Analysis: Assist in analyzing financial reports, and key performance indicators (KPIs). Identify trends and provide insights to support decision-making. Budgeting and Forecasting: Support the preparation of financial forecasts. Analyze the variances between actual results and projections and prepare variance reports. Data Collection and Reconciliation: Gather, organize, and validate financial data from multiple sources. Reconcile discrepancies in data to ensure accuracy. Reporting and Presentations: Prepare financial reports, dashboards, and presentations for internal stakeholders. Summarize data findings and present actionable insights. Process Improvement: Assist in identifying inefficiencies in financial processes and recommend improvements. Support the automation of manual reporting tasks. Ad-Hoc Analysis: Respond to ad-hoc requests for financial analysis or reports from managers or other departments. Assist in evaluating the financial impact of potential business decisions. System and Tool Support: Learn and utilize financial systems (e.g., ERP software like NetSuite, Excel, Power BI). Provide support in maintaining financial tools and models. Collaboration: Work closely with finance, accounting, and operations teams to support cross-functional projects. Participate in team meetings to contribute ideas and updates. Research: Conduct market or industry research to support financial models and business cases. Assist in benchmarking studies to compare company performance against competitors. Compliance and Documentation: Ensure financial records and reports adhere to company policies and regulatory standards. Document processes and findings to maintain transparency and accuracy. EMPLOYMENT STANDARDS General Education College: Current enrollment in an associate or bachelor's degree program from an accredited college or university Major: Accounting/Finance/or Business Administration Job-Related Experience: N/A Certifications: N/A Licenses, etc.: Valid driver's license is necessary when operating a vehicle while on agency business. CONDITIONS OF EMPLOYMENT Knowledge: Basic concepts of financial reporting, budgeting, accounting principles. Skills: High knowledge of MS Office suite of products including VB coding in Excel. Abilities: Critical thinking; Analytical skills Physical Demands: Work is light requiring lifting of computer equipment and involves typical office behaviors. While performing the duties of this job, the employee is regularly required to sit, use hands to finger, handle, or feel and talk or hear. The employee is frequently required to reach with hands and arms. The employee is occasionally required to stand; walk; climb or balance; stoop, kneel, crouch, or crawl. The employee must regularly lift and move up to 10 pounds. Specific vision abilities this job requires include close vision and the ability to adjust focus. Work Environment: Work is performed in a typical office setting. Must be able to obtain and maintain eligibility for issuance of a NASA credential. Must be able to pass a pre-employment background check and drug test.

Management Interns participate in an accelerated 9-week program during the summer months. Individuals who successfully complete this program will be considered for the Dayton Freight Management Trainee Program upon achievement of their degree. Responsibilities * Gain useful knowledge about the Transportation industry and about Dayton Freight's policies, procedures and philosophies. * Contribute to the success of the Service Center by learning and understanding each position's function and contribution to the overall mission of Dayton Freight. Qualifications * Currently enrolled in an accredited college * Basic math skills * Fluent in English * Willing to work 1st, 2nd and 3rd shifts during the Program Benefits * Stable and growing organization * Pay beginning at $23.35 per hour * Quick advancement * Professional, positive and people-centered work environment * Modern facilities * Clean, late model equipment * 401(k) plan, Company Match

We are Trusted Partners | Supporting Flight. Our more than 50 years of success are the result of our employees who have dedicated themselves to providing unmatched quality, service, and safety in aircraft maintenance, repair, and overhaul. Being a part of ATS offers an opportunity to build meaningful partnerships, innovate new ideas, do the right thing, and make our company a great place to work! Your Work Matters - And So Do YouAt ATS, we reward your contributions with a well-rounded compensation package designed to support you today and help you plan for tomorrow: Base pay range: $20.77 - $21.75 hourly rate plus annual bonus eligibility Comprehensive health coverage - medical, dental, vision, and more 401(k) with company match and access to personal financial advisors Generous time off - PTO, holidays, and paid parental leave Tuition assistance and loan repayment for AMT programs On-the-job training and leadership development through ATS Academy Employee discounts on travel, tech, wellness, and more Confidential 24/7 support through our Employee Assistance Program Join a team that values your growth, your well-being, and your future. SUMMARY: Service, repair, and overhaul aircraft to ensure airworthiness. Works under moderate supervision to perform basic tasks associated with aircraft maintenance. ESSENTIAL DUTIES AND RESPONSIBILITIES: The duties include the following items: · Repair, modify, replace, or otherwise perform routine aircraft maintenance work in a safe and timely manner. · Accurately completes required maintenance-related paperwork. · Communicate effectively with other maintenance personnel at all levels by keeping co-workers and leadership apprised of work progress and difficulties as they arise. · Complete on-the-job training (OJT) forms and any required reading in a timely manner. EDUCATION AND /OR EXPERIENCE: · High School education or equivalent · FAA Airframe or Powerplant license or enrollment in Part 147 school preferred · Previous Aviation and/or Mechanical experience preferred PHYSICAL EFFORT AND DEXTERITY: · While performing the duties of this job, the employee will be required to sit, use their hands and arms, talk or hear, and focus on objects close up. · Must have full color vision and visual acuity with or without corrective lenses. · The employee will also be required to stand, walk, stoop, kneel, crouch, or crawl. · The employee may be required to lift and/or move up to 25 pounds and occasionally lift and/or move up to 50 pounds. · Ability to handle and climb ladders and aircraft stairs. Compensation The base salary for this position is $20.77 - $21.75 (expressed as hourly for non-exempt), exclusive of benefits or potential bonuses. This position is eligible for a quarterly corporate bonus. If you are hired at ATS, your final base hourly rate will be determined by factors such as skills, education, and experience. In addition to those factors, we consider the internal equity of our current team members as a part of any final offer. Please keep in mind that the range noted above is the full base hourly range for the role. Hiring at the upper end of the range would not be typical to allow for future and continued salary growth. We also offer a generous benefits package, as detailed below. EEO EMPLOYER STATEMENT: ATS is committed to providing equal employment opportunities to all employees and applicants, and prohibits discrimination, harassment, and retaliation of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic or status protected by federal, state, or local laws. ATS is also committed to protecting its applicants for employment and independent contractors from unlawful discrimination, harassment, and retaliation. Provisions in applicable laws providing for bona fide occupational qualifications or business necessity will be adhered to where appropriate. As part of our equal employment opportunity policy, ATS will also take affirmative action as called for by applicable laws and Executive Orders to ensure that minority group individuals, females, Armed Forces veterans, and qualified disabled persons are introduced into our workforce and considered for promotional opportunities

We're making an investment in the next generation of veterinary doctors! As part of the professional veterinary curriculum, colleges encourage off-campus educational experiences in practices outside of the teaching hospital. Practical experience in a well-run and contemporary practice can be a valuable component of your veterinary education, preparing you to deliver better care after graduation. Our program is dedicated to contributing to your practice-readiness and to help you hit the ground running after graduation. Our program structure: Our externships are flexible-they can range from two to eight weeks during the year, according to your college curriculum - but are typically two or three weeks in length. Your schedule will include days, evenings and weekends. Our externship rotations are designed to allow students, under veterinary supervision, to practice the problem-solving, technical and communication skills that they have acquired during their clinical preparation. Externs are given the opportunity to work alongside our veterinary team and are encouraged to participate in all aspects of patient care. A stipend of $250 per week will be provided. What you'll be doing: Externs experience the typical caseload of a small animal practice. Under the supervision of your mentor doctor you will gather histories, perform physical examinations, develop diagnostic and therapeutic plans, scrub in to surgery, assist in the management of medical cases, provide wellness care, develop your client communication skills, polish your technical skills and produce appropriate medical records (SOAPs) within the time limits of daily practice. Who we're looking for: Extern students are expected to be enthusiastic and effective participants in our patient care activities, upholding the professional and ethical standards of our practice. Students participating in the externship program are suggested to review the Veterinary Practice Act in regard to the scope of duties that may be performed, and to be familiar with the type and degree of veterinary supervision that is required. These should be followed carefully in order to protect both yourself and our practice. As a veterinary student extern, we expect you to dress and behave in a professional manner and to meet the expectations that we have of all team members as outlined in our employee handbook. Requirements: Be enrolled in an accredited DVM program. You are authorized to work in the United States. You must carry professional liability insurance. AVMA PLIT liability insurance is free for all student members of the AVMA. You may apply for this coverage on their website. Please check to make sure your coverage is current and submit a certificate of coverage with your application. About us: As sponsors of the Veterinary Externship Program, we see ourselves to be part of your educational team, providing instruction, mentoring and evaluation of the students who participate. You will be assigned a mentor and work on the learning objectives as defined by your college program or to meet your specific goals. At the end of the externship your mentor will provide a written evaluation of your performance as required by your college program. We look forward to working with you!

PULLMAN, a Structural Group Company, integrates technology-driven, engineered solutions into its industry-leading contracting services. PULLMAN's capabilities include specialty design-build services for new and existing structures, as well as a wide range of specialty repair and maintenance services. With offices located throughout Canada, and as a signatory to local, national, and international labor union agreements, PULLMAN has the track record and the experience to meet our customers' specialty contracting needs. About the Role: If you are seeking a challenging and rewarding construction internship opportunity with a dynamic, diversified and innovative company, a PULLMAN Project Engineer Internship may be for you! Our Project Engineer Career Development (PECD) program is a cornerstone of our growth and development philosophy. With an emphasis on in-field learning and development, our Project Engineer Interns will assist in: Scheduling and production rate tracking Estimating Budget preparation and project cost control Safety management Quality control Business development and client relations Field resource management Our ideal Project Engineer Intern candidate loves to solve problems, thrives in a collaborative team-based environment, has a strong time management system, hits deadlines, enjoys communicating with different types of people, organizes themselves well and is safety focused About the Team: Our Summer 2026 Internship will be an in-office position supported by our PULLMAN Seattle team located in Tukwila, WA. In this role, you can expect to be on site at projects across the greater Seattle area 50% of the time. Our PULLMAN Seattle team will tackle projects across multiple industries; however, this branch's primary industries are commercial and public. Throughout your internship experience, you can expect to learn about multiple projects within these industries. For more information on PULLMAN Seattle, please refer to PULLMAN Seattle's website page: Seattle | PULLMAN Minimum Qualifications: Bachelor's Degree- preference for Construction Management, Civil Engineering or related field of study. Cumulative grade point average of 2.8 or higher. Excellent verbal and written communication skills. Exceptional documentation and organizational skills. Aptitude for solving problems. Reliable transportation from the office to jobsites. Benefits: PECD Program providing exposure into various areas of construction project management. Hands-on mentorship. Internal career flexibility. Cell-phone reimbursement 401(k) eligible upon hire. Pay range $21.00 to $31.00 an hour dependent on resume and experience. PULLMAN is proud of a company culture that promotes 24/7 safety and quality. We offer competitive compensation and benefits including medical and dental insurance, 401(k), paid holidays & vacation, tuition reimbursement, career development and growth opportunities, and a caring work environment. EOE/M/F/D/V

The Law Clerk supports the Legal Department on a variety of projects. With supervision, this position prepares basic legal documents; supports and develops educational and training initiatives; reviews internal and external legal documents; communicates with internal personnel regarding various legal matters; and attends various legal meetings and conferences at the direction of the General Counsel. Essential Job Functions * With supervision, reviews and prepares various basic legal documents. * With supervision, prepares various legal research as directed by the General Counsel. * As needed, prepares, designs and presents certain legal training to be used internally to educate business personnel on certain legal concepts. * Provides possible solutions to legal matters and deals with a variety of situations where only limited information exists. * Provides legal support to the supervising attorney when assisting the sales team, project managers, engineering and production managers and team members with various matters involving aircraft maintenance events, parts programs, business development programs, executive and corporate matters and other special projects. Works to continually improve and develop basic analytical and legal skills. * Performs other related duties as assigned by the supervising attorney. Job Specific Requirements * Licenses/Certificates: N/A * Attendance: Regularly scheduled attendance required * Physical: Reads small print; repetitive motion; tolerates standing, walking, bending and sitting * Environmental: N/A Education and Experience * Currently enrolled in an accredited law school * Experience working well in a team environment * Excellent written and verbal communication and organizational skills * Proficiency with Microsoft software (Word, Excel, etc.) Duncan Aviation is an Equal Opportunity and Affirmative Action Employer. EOE Minorities/Females/Protected Veterans/Disabled

The Parts and Rotables Sales/Component Services Intern supports the Parts and Rotables Sales or Component Services team as directed. This position contacts prospects, customers, vendors and Duncan Aviation International Agents via phone or e-mail to promote all parts/rotables and component services, materials, rotables, consignments, OEM discounts, locations and repair capabilities; and updates CRM with customer names and aircraft owned and changes information as appropriate. In addition, the Intern performs in depth data analysis using Microsoft Access and Excel and works with the sales team to create and execute targeted marketing campaigns to exceed financial goals and objectives. Essential Job Functions * Assists with promoting Parts and Rotables Sales or Component Services activities for aviation parts, repair and overhauls by providing sales support and initiating calls and/or emails to established or potential customers and Duncan Aviation International agents regarding their current and upcoming parts and/or service needs, as well as their opinion of our professionalism and commitment to customer service. Performs prospect and customer follow-ups. * Reviews and updates customer information in our CRM as needed to ensure the accuracy and currency of our customer information. Identifies new aircraft operators and adds them to CRM. * Compiles internal historical information for parts activity. Performs analysis of various data for the sales team using Microsoft Access and Excel. * Generates marketing campaign lists from the CRM for targeting our market, growing market share and achieving financial objectives. Assists with creation of signage, circulars, mock ups, e-mail campaigns, on line promotions, etc., distribution of marketing materials, fulfillment of marketing offers, and market analysis. Prepares and distributes marketing informational packets to customers and prospects. Participates in marketing campaigns as directed. * Assists Consignment Manager with incoming consignments to include inventorying equipment, taking pictures, and adding information about the inventory. * Performs other duties as required by management. Job Specific Requirements * Licenses/Certificates: N/A * Attendance: Regularly scheduled attendance required * Physical: Repetitive motion; tolerates sitting; proficient typing and data entry skills * Environmental: N/A Education and Experience * High school degree or equivalent required * Currently a full-time student at a four-year college or university in Nebraska as junior or senior status; or currently a full-time student at a two-year college in Nebraska and successfully completed a minimum of one-half of the total credit hours required for an associate degree; or a resident of Nebraska, enrolled full-time in a four-year college or university in a state other than Nebraska, and achieved junior or senior status * Proficiency with general computer use and use of Microsoft Software (i.e. Word, Excel, etc.) * Bilingual in Portuguese or Spanish helpful Duncan Aviation is an Equal Opportunity and Affirmative Action Employer. EOE Minorities/Females/Protected Veterans/Disabled

The Interior Intern, under immediate supervision, learns and gains competency according to customer specifications and Duncan Aviation approved procedures in a safe and organized work area in one, or a combination, of the following shops: Finish, Cabinet, Interior Completions, Upholstery or Sewing. This position maintains and cleans shop equipment; organizes shop and hangar areas; and completes appropriate documentation in timely manner. Essential Job Functions 1. Under immediate supervision, performs a range of job functions in the Interior department. Finish: * Prepares cabinet surfaces and substrates for paint or finish and miscellaneous plastic, metal and leather parts for paint or dye to customer satisfaction and Duncan Aviation approved procedures using appropriate equipment. * Applies stains, dyes, paints or finishes to prepared parts. Mixes paint and stains as needed. * Performs basic detail work, polish and clean-up on finished items. Cabinet: * Laminates, re-laminates, repairs and modifies existing aircraft cabinets to customer satisfaction and Duncan Aviation approved procedures using appropriate equipment. * Reads blue prints and builds new cabinet parts per blueprints. Orders necessary parts as required. * Performs specialty work using plexi-glass, mirrors and sheet metal products. Interior Completions: * Removes and installs interiors including carpeting, insulation, soundproofing, fabric accessories, etc. in aircraft using hand tools according to Duncan Aviation approved procedures. * Strips materials, preps and repairs panels. Recovers flat work and accessories using various fasteners and hand tools. * Prepares and paints and dyes miscellaneous plastic, metal and leather parts. Upholstery/Sewing: * Prepares seats for upholstering by stripping all foam and covers using various hand tools according to standard operating procedures. * Disassembles, prepares, repairs, recovers and reassembles seats, miscellaneous seat parts, flatwork including minimal sewing, and accessories for paint. * Cleans glue off panels and strips materials from parts. * Foams small chair parts (i.e. armrests, headrests, shell, etc.). * Uses sewing instruction manuals to sew kit and core seat covers, small seat parts and miscellaneous items (i.e. armrests, headrests shells, curtains, control boots, flight deck armrest and pouches, wind laces, glare shields and crash pads, covers on burn cushions, etc.) for various makes and models of aircraft. * Patterns small seat parts and miscellaneous items (i.e. armrests, headrests, shells, curtains, control boots, light deck armrest and pouches, wind laces, glare shields and crash pads, etc.). 2. Under immediate supervision researches, prepares, and signs off various documents for record keeping purposes as required by Duncan approved procedures, manufacturers' maintenance manuals, and FAA regulations (i.e. turnovers, removal sheets, flammability testing, W.O. Sheets, personal training log, and other work order related documents supporting the review squawks and expected hours). 3. Performs other related duties as assigned by management. Job Specific Requirements * Licenses/Certificates: Valid driver's license and acceptable driving record; Respirator Fit qualified * Attendance: Regularly scheduled attendance required * Physical: Routinely lifts 50 lbs., occasionally 100 lbs.; reads small print; hears sounds associated with mechanical deficiencies; repetitive motion; works with moving parts and vibration; tolerates working in confined spaces and heights above four feet; tolerates products and materials associated with component maintenance; tolerates standing, walking, bending, kneeling, stooping, crouching, crawling, climbing and sitting * Environmental: Tolerates working in extreme temperatures and noisy environments Education and Experience * High School or College student * Minimum six months related experience preferred Duncan Aviation is an Equal Opportunity and Affirmative Action Employer. EOE Minorities/Females/Protected Veterans/Disabled

Virginia Spaceport Authority Internship Program gives students the chance to apply their education to real-world challenges through meaningful, hands-on projects. Top candidates are well-rounded students from a variety of backgrounds who demonstrate inquisitiveness, team-orientation, excellence, and resilience. At the time you apply for this announcement, you must be a degree seeking student who is enrolled or accepted for enrollment in an accredited educational institution on at least a half-time basis. SUMMARY General Description: The Financial Analyst Intern will support the finance and accounting teams in analyzing financial data, preparing reports, and contributing to key business decisions. This role provides a hands-on learning opportunity for a motivated individual to gain practical experience in financial analysis, budgeting, forecasting, and process improvement initiatives. The intern will assist with tasks such as reconciling financial discrepancies, preparing variance analyses, and creating dashboards to track financial performance metrics. Additionally, the Financial Analyst Intern will collaborate with cross-functional teams, participate in financial planning meetings, and help drive insights that enhance operational efficiency and financial health. This position is ideal for a detail-oriented and analytical individual with a strong interest in financial management and business strategy. The intern will develop critical thinking skills and gain exposure to the tools, systems, and processes utilized by finance professionals in a dynamic business environment. Responsibilities and Duties: Financial Data Analysis: Assist in analyzing financial reports, and key performance indicators (KPIs). Identify trends and provide insights to support decision-making. Budgeting and Forecasting: Support the preparation of financial forecasts. Analyze the variances between actual results and projections and prepare variance reports. Data Collection and Reconciliation: Gather, organize, and validate financial data from multiple sources. Reconcile discrepancies in data to ensure accuracy. Reporting and Presentations: Prepare financial reports, dashboards, and presentations for internal stakeholders. Summarize data findings and present actionable insights. Process Improvement: Assist in identifying inefficiencies in financial processes and recommend improvements. Support the automation of manual reporting tasks. Ad-Hoc Analysis: Respond to ad-hoc requests for financial analysis or reports from managers or other departments. Assist in evaluating the financial impact of potential business decisions. System and Tool Support: Learn and utilize financial systems (e.g., ERP software like NetSuite, Excel, Power BI). Provide support in maintaining financial tools and models. Collaboration: Work closely with finance, accounting, and operations teams to support cross-functional projects. Participate in team meetings to contribute ideas and updates. Research: Conduct market or industry research to support financial models and business cases. Assist in benchmarking studies to compare company performance against competitors. Compliance and Documentation: Ensure financial records and reports adhere to company policies and regulatory standards. Document processes and findings to maintain transparency and accuracy. EMPLOYMENT STANDARDS General Education College: Current enrollment in an associate or bachelor's degree program from an accredited college or university Major: Accounting/Finance/or Business Administration Job-Related Experience: N/A Certifications: N/A Licenses, etc.: Valid driver's license is necessary when operating a vehicle while on agency business. CONDITIONS OF EMPLOYMENT Knowledge: Basic concepts of financial reporting, budgeting, accounting principles. Skills: High knowledge of MS Office suite of products including VB coding in Excel. Abilities: Critical thinking; Analytical skills Physical Demands: Work is light requiring lifting of computer equipment and involves typical office behaviors. While performing the duties of this job, the employee is regularly required to sit, use hands to finger, handle, or feel and talk or hear. The employee is frequently required to reach with hands and arms. The employee is occasionally required to stand; walk; climb or balance; stoop, kneel, crouch, or crawl. The employee must regularly lift and move up to 10 pounds. Specific vision abilities this job requires include close vision and the ability to adjust focus. Work Environment: Work is performed in a typical office setting. Must be able to obtain and maintain eligibility for issuance of a NASA credential. Must be able to pass a pre-employment background check and drug test.

We are Trusted Partners | Supporting Flight. Our more than 50 years of success are the result of our employees who have dedicated themselves to providing unmatched quality, service, and safety in aircraft maintenance, repair, and overhaul. Being a part of ATS offers an opportunity to build meaningful partnerships, innovate new ideas, do the right thing, and make our company a great place to work! Your Work Matters - And So Do YouAt ATS, we reward your contributions with a well-rounded compensation package designed to support you today and help you plan for tomorrow: Base pay range: $20.77 - $21.75 hourly rate plus annual bonus eligibility Comprehensive health coverage - medical, dental, vision, and more 401(k) with company match and access to personal financial advisors Generous time off - PTO, holidays, and paid parental leave Tuition assistance and loan repayment for AMT programs On-the-job training and leadership development through ATS Academy Employee discounts on travel, tech, wellness, and more Confidential 24/7 support through our Employee Assistance Program Join a team that values your growth, your well-being, and your future. SUMMARY: Service, repair, and overhaul aircraft to ensure airworthiness. Works under moderate supervision to perform basic tasks associated with aircraft maintenance. ESSENTIAL DUTIES AND RESPONSIBILITIES: The duties include the following items: * Repair, modify, replace, or otherwise perform routine aircraft maintenance work in a safe and timely manner. * Accurately completes required maintenance-related paperwork. * Communicate effectively with other maintenance personnel at all levels by keeping co-workers and leadership apprised of work progress and difficulties as they arise. * Complete on-the-job training (OJT) forms and any required reading in a timely manner. EDUCATION AND /OR EXPERIENCE: * High School education or equivalent * FAA Airframe or Powerplant license or enrollment in Part 147 school preferred * Previous Aviation and/or Mechanical experience preferred PHYSICAL EFFORT AND DEXTERITY: * While performing the duties of this job, the employee will be required to sit, use their hands and arms, talk or hear, and focus on objects close up. * Must have full color vision and visual acuity with or without corrective lenses. * The employee will also be required to stand, walk, stoop, kneel, crouch, or crawl. * The employee may be required to lift and/or move up to 25 pounds and occasionally lift and/or move up to 50 pounds. * Ability to handle and climb ladders and aircraft stairs. Compensation The base salary for this position is $20.77 - $21.75 (expressed as hourly for non-exempt), exclusive of benefits or potential bonuses. This position is eligible for a quarterly corporate bonus. If you are hired at ATS, your final base hourly rate will be determined by factors such as skills, education, and experience. In addition to those factors, we consider the internal equity of our current team members as a part of any final offer. Please keep in mind that the range noted above is the full base hourly range for the role. Hiring at the upper end of the range would not be typical to allow for future and continued salary growth. We also offer a generous benefits package, as detailed below. EEO EMPLOYER STATEMENT: ATS is committed to providing equal employment opportunities to all employees and applicants, and prohibits discrimination, harassment, and retaliation of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic or status protected by federal, state, or local laws. ATS is also committed to protecting its applicants for employment and independent contractors from unlawful discrimination, harassment, and retaliation. Provisions in applicable laws providing for bona fide occupational qualifications or business necessity will be adhered to where appropriate. As part of our equal employment opportunity policy, ATS will also take affirmative action as called for by applicable laws and Executive Orders to ensure that minority group individuals, females, Armed Forces veterans, and qualified disabled persons are introduced into our workforce and considered for promotional opportunities

Under close supervision, the Install Intern performs installation, troubleshooting and repair of aircraft wiring and avionics systems using various hand tools and test equipment, to meet manufacturing specifications, Duncan approved procedures, FARs and industry standards in a safe, clean and organized work area. Essential Job Functions 1. Under close supervision, performs basic routing of wiring throughout aircraft and connecting wiring to accessories such as relays, circuit breakers, connectors and switches. Learns and performs preparation and pinning of new system terminations per manufacturer specifications, Duncan Aviation approved procedure, and FARs. 2. Under close supervision, performs wire marking, bundling, and pre-pinning systems to be installed. 3. Under close supervision, disassembles and reassembles aircraft interior, instrument panels and avionics equipment bays prior to and/or following the installation of wiring and/or repair of avionics systems, using proper handling and storage techniques. Properly document all removal and installation of aircraft parts and accessories according to Installation approved procedures. 4. Under close supervision, performs basic wiring checks with assistance from higher level technicians to ensure functionality of wiring installations. 5. With assistance from experienced technicians, performs, basic troubleshooting skills and reports problems to a senior technician. 6. With assistance, documents completed work on the work order and maintenance of Technician Training Log. 7. Maintains current industry, equipment and FAA knowledge by attending factory classes, OJT and by researching and reading technical documents, trade publications, FAR's, etc. 8. Performs other related duties as assigned by management. Job Specific Requirements * Licenses/Certificates: Valid driver's license and acceptable driving record * Attendance: Regularly scheduled attendance required * Physical: Routinely lifts 50 lbs.; reads small print; identifies color; works in confined spaces; works in heights above four feet; tolerates products and materials associated with component maintenance; tolerates standing, walking, bending, kneeling, stooping, crouching, crawling, climbing and sitting * Environmental: Tolerates working in extreme temperatures and noisy environments Education and Experience * High School graduate or equivalent required * Currently enrolled in an avionics and/or electronics secondary education program Duncan Aviation is an Equal Opportunity and Affirmative Action Employer. EOE Minorities/Females/Protected Veterans/Disabled

The Manager In Training program provides hands-on training in Sales, Operations, Customer Service, finance, fleet management, and people management. This position has a clearly defined career path to Branch Manager in as little as 12-18 months. This role supports the achievement of location sales goals and customer service excellence. Wages: $20.00/hr. Qualifications: High School diploma or equivalent is required. A valid driver's license is required. Strong computer skills and multitasking skills are needed. Excellent written and spoken communication. Apply today and shift your career into drive for tomorrow! Benefits and Perks: Not only do you get to be part of an organization where you Drive your Potential, Power your Passion!! Below are a few perks and discounts: Up to 40% off the base rate of any standard Hertz rental Medical, Dental & Vision plan options Retirement programs, including 401(k) employer matching Paid Parental Leave & Adoption Assistance Employee Assistance Program for employees & family Educational Reimbursement & Discounts Voluntary Insurance Programs - Pet, Legal/Identity Theft, Critical Illness Perks & Discounts -Theme Park Tickets, Gym Discounts & more

Build an Aviation Career You're Proud Of At StandardAero, we use our ingenuity and know-how to find solutions for the simple to the most complex challenges in Aviation. Together, we get the job done and done well. At our North Kansas City, MO site you will be trained by the world's best. Bring your strong work-ethic, and a hunger for learning - we'll teach you the rest. What's it like at StandardAero Collaboration, teamwork, and having each other's backs are the norm here. Our growth in this expanding industry means getting career stability and opportunities to grow. With great resources, an inclusive atmosphere, and a culture based on shared values, we'll support you in building a solid career with a team you can count on. Responsibilities will include, but are not limited to: * Machining aircraft parts to tight tolerances using manual/ automatic lathes, mills, cylindrical grinder, Drill presses, Engine lathes, Sawing machines, Shapers and/ or CNC machines * Fit and assemble components and machine parts to close tolerance * Verify dimensions of machined tools and parts using precision measuring instruments * Maintain inspection records and complete inspection reports * Miscellaneous projects on an as-needed basis Applicable competencies, aptitudes and qualifications: * Completion of high school, completion of college/CEGEP/vocational or technical training * CNC or cylindrical grinder experience would be an asset * Ability to read & understand complex technical instructions and drawings, blueprints, charts and tables * Ability to work with minimal supervision * A high level of efficiency; the ability to adhere to specific quality standards while meeting production deadlines * Willing to work overtime as required, including short notice * Ability to work in the fast-paced environment, repetitive tasks and standing for extended periods * Strong communication skills What makes a good fit for StandardAero? We love people who take pride in their work and being collaborative with their team. We work together and support each other. We're very team oriented too and that is greatly valued. We also believe in getting the job done, whatever it takes and that's a work-ethic that is often hard to describe. We love that too -it's what makes us great partners and teammates to each other. We are respectful of each other and who we are, and welcome people from all walks of life and give everyone open access to learn and build skills. If this sounds like a great fit for you, we hope you apply and join us. Inclusivity Is Our Standard StandardAero offers equal employment opportunities for all. Our supportive environment celebrates diversity with no room for harassment or discrimination of any kind. We invite you to be who you are and experience our welcoming culture. Raising the Standard of Excellence since 1911 With over a century of proven excellence, StandardAero has become an industry leader in MRO services and customized solutions in the aerospace field. Our shared values and learning-based culture inspire our team to exceed their potential and power our customers' missions worldwide. With on-the-job training, advancement opportunities, and excellent benefits, StandardAero invites you to experience a fulfilling and meaningful career with us. About Us When you work at StandardAero, you're not just an employee, you're part of a vibrant company of like-minded people, all working collaboratively towards the same goals. We succeed as a team because we value the unique contributions and perspectives of all of our people, fostering a culture of collaboration and excellence. It's a culture that promotes mutual respect and effective communications to create an environment of stability, shaping the organization and forging a successful future. Our goal is to be the best place to work, giving each and every employee the opportunity to reach their maximum potential through continuous learning and advancement opportunities, allowing all team members to exceed their potential and empower everyone's success. StandardAero is one of the world's largest independent providers of services, including engine and airframe maintenance, repair and overhaul, engine component repair, engineering services, interior completions and paint applications. The company is a global enterprise that employs nearly 7,000 employees worldwide with annual revenues exceeding $4 billion. StandardAero serves a diverse array of customers in business and general aviation, airline, military, helicopter, components and energy markets. The company celebrated its 100th year of industry leadership in 2011. StandardAero is owned by Carlyle, a global investment firm with deep industry expertise that deploys private capital across four business segments: Corporate Private Equity, Real Assets, Global Credit and Investment Solutions.

The Interior Intern, under immediate supervision, learns and gains competency according to customer specifications and Duncan Aviation approved procedures in a safe and organized work area in one, or a combination, of the following shops: Finish, Cabinet, Interior Completions, Upholstery or Sewing. This position maintains and cleans shop equipment; organizes shop and hangar areas; and completes appropriate documentation in timely manner. Essential Job Functions 1. Under immediate supervision, performs a range of job functions in the Interior department. Finish: * Prepares cabinet surfaces and substrates for paint or finish and miscellaneous plastic, metal and leather parts for paint or dye to customer satisfaction and Duncan Aviation approved procedures using appropriate equipment. * Applies stains, dyes, paints or finishes to prepared parts. Mixes paint and stains as needed. * Performs basic detail work, polish and clean-up on finished items. Cabinet: * Laminates, re-laminates, repairs and modifies existing aircraft cabinets to customer satisfaction and Duncan Aviation approved procedures using appropriate equipment. * Reads blue prints and builds new cabinet parts per blueprints. Orders necessary parts as required. * Performs specialty work using plexi-glass, mirrors and sheet metal products. Interior Completions: * Removes and installs interiors including carpeting, insulation, soundproofing, fabric accessories, etc. in aircraft using hand tools according to Duncan Aviation approved procedures. * Strips materials, preps and repairs panels. Recovers flat work and accessories using various fasteners and hand tools. * Prepares and paints and dyes miscellaneous plastic, metal and leather parts. Upholstery/Sewing: * Prepares seats for upholstering by stripping all foam and covers using various hand tools according to standard operating procedures. * Disassembles, prepares, repairs, recovers and reassembles seats, miscellaneous seat parts, flatwork including minimal sewing, and accessories for paint. * Cleans glue off panels and strips materials from parts. * Foams small chair parts (i.e. armrests, headrests, shell, etc.). * Uses sewing instruction manuals to sew kit and core seat covers, small seat parts and miscellaneous items (i.e. armrests, headrests shells, curtains, control boots, flight deck armrest and pouches, wind laces, glare shields and crash pads, covers on burn cushions, etc.) for various makes and models of aircraft. * Patterns small seat parts and miscellaneous items (i.e. armrests, headrests, shells, curtains, control boots, light deck armrest and pouches, wind laces, glare shields and crash pads, etc.). 2. Under immediate supervision researches, prepares, and signs off various documents for record keeping purposes as required by Duncan approved procedures, manufacturers' maintenance manuals, and FAA regulations (i.e. turnovers, removal sheets, flammability testing, W.O. Sheets, personal training log, and other work order related documents supporting the review squawks and expected hours). 3. Performs other related duties as assigned by management. Job Specific Requirements * Licenses/Certificates: Valid driver's license and acceptable driving record; Respirator Fit qualified * Attendance: Regularly scheduled attendance required * Physical: Routinely lifts 50 lbs., occasionally 100 lbs.; reads small print; hears sounds associated with mechanical deficiencies; repetitive motion; works with moving parts and vibration; tolerates working in confined spaces and heights above four feet; tolerates products and materials associated with component maintenance; tolerates standing, walking, bending, kneeling, stooping, crouching, crawling, climbing and sitting * Environmental: Tolerates working in extreme temperatures and noisy environments Education and Experience * High School or College student * Minimum six months related experience preferred Duncan Aviation is an Equal Opportunity and Affirmative Action Employer. EOE Minorities/Females/Protected Veterans/Disabled

The Manager In Training program provides hands-on training in Sales, Operations, Customer Service, finance, fleet management, and people management. This position has a clearly defined career path to Branch Manager in as little as 12-18 months. This role supports the achievement of location sales goals and customer service excellence. Wages: $19.00/hr. Qualifications: High School diploma or equivalent is required. A valid driver's license is required. Strong computer skills and multitasking skills are needed. Excellent written and spoken communication. Apply today and shift your career into drive for tomorrow! Benefits and Perks: Not only do you get to be part of an organization where you Drive your Potential, Power your Passion!! Below are a few perks and discounts: * Up to 40% off the base rate of any standard Hertz rental * Medical, Dental & Vision plan options * Retirement programs, including 401(k) employer matching * Paid Parental Leave & Adoption Assistance * Employee Assistance Program for employees & family * Educational Reimbursement & Discounts * Voluntary Insurance Programs - Pet, Legal/Identity Theft, Critical Illness * Perks & Discounts -Theme Park Tickets, Gym Discounts & more

* Applicants must meet the following criteria to be eligible for consideration in Duncan Aviation's SkillBridge Program * Applicant MUST be currently serving on Active Duty in a branch of the U.S Military * SkillBridge Assignments MUST be completed WITHIN the final 180 days of active service and separation/retirement date * SkillBridge Internships MUST be completed at 1 of Duncan Aviation's Full-Service MRO'S (Nebraska, Michigan or Utah) * Applicants MUST complete an application and interview prior prior to receiving a SkillBridge Employment offer with Duncan Aviation The Duncan Aviation SkillBridge Internship Program is an approved SkillBridge Program under the Department of Defense Instruction 1322.29. The program is an opportunity for transitioning service members to gain valuable civilian work experience through an internship during their last 6 months of service, for up to 180 days. The Program is open to all ranks and experience levels. SkillBridge participants are not eligible for compensation from Duncan Aviation, as they continue to receive military compensation and benefits as active-duty service members. During this program you will be on-site at a Duncan Aviation location performing an internship in an entry to mid-level career type role. You'll have on-the-job training supporting a work schedule equivalent to 40hrs per week. Outlined below are the Goals, Objectives, and Outcomes for the program. Goals - Provide transitioning service members fellowship-style job skills training during the last portion of their military commitment. This program is specifically designed to offer internships that result in the potential to transition to a full-time opportunity at the conclusion of the training. Objectives - Service Members who complete the Intern program will be highly-trained, capable, future employees that align to the specific needs of the organization. This program provides a comprehensive internship experience including professional development, networking with leadership, and training specifically focused on Duncan Aviation's brand promise, core values and job responsibilities Outcome - Offer transitioning service member a rewarding opportunity to join the Duncan Aviation team Duncan Aviation welcomes all service members to participate in our SkillBridge Internship Program. This internship is unpaid. As a service member still on active duty, you will continue to draw all pay, allowances and medical benefits from the military. In addition, all costs associated with this internship (including, but not limited to lodging and tools) is your responsibility. This internship does not guarantee you a job with Duncan Aviation. At the completion of your internship, you will be evaluated and potentially offered a full-time position as a Duncan Aviation team member. Duncan Aviation is an Equal Opportunity and Affirmative Action Employer. EOE Minorities/Females/Protected Veterans/Disabled

The **Manager In Training** program provides hands-on training in Sales, Operations, Customer Service, finance, fleet management, and people management. This position has a clearly defined career path to Branch Manager in as little as 12-18 months. This role supports the achievement of location sales goals and customer service excellence. **Wages:** $19.00/hr. **Qualifications:** High School diploma or equivalent is required. A valid driver's license is required. Strong computer skills and multitasking skills are needed. Excellent written and spoken communication. **Apply** today and shift your **career** into drive for **tomorrow** ! **Benefits and Perks:** Not only do you get to be part of an organization where you Drive your Potential, Power your Passion!! Below are a few perks and discounts: + Up to 40% off the base rate of any standard Hertz rental + Medical, Dental & Vision plan options + Retirement programs, including 401(k) employer matching + Paid Parental Leave & Adoption Assistance + Employee Assistance Program for employees & family + Educational Reimbursement & Discounts + Voluntary Insurance Programs - Pet, Legal/Identity Theft, Critical Illness + Perks & Discounts -Theme Park Tickets, Gym Discounts & more The Hertz Corporation operates the Hertz, Dollar Car Rental, Thrifty Car Rental brands in approximately 9,700 corporate and franchisee locations throughout North America, Europe, The Caribbean, Latin America, Africa, the Middle East, Asia, Australia and New Zealand. The Hertz Corporation is one of the largest worldwide airport general use vehicle rental companies, and the Hertz brand is one of the most recognized in the world. **US EEO STATEMENT** At Hertz, we champion and celebrate a culture of diversity and inclusion. We take affirmative steps to promote employment and advancement opportunities. The endless variety of perspectives, experiences, skills and talents that our employees invest in their work every day represent a significant part of our culture - and our success and reputation as a company. Individuals are encouraged to apply for positions because of the characteristics that make them unique. EOE, including disability/veteran