Electrical engineer internship jobs in Greenwood, SC - 168 jobs

The Electrical Engineer (EE) will be responsible for the design of AC and DC power distribution systems, lighting systems, grounding, paralleling switchgear, standby generators, MV and LV distribution, Building Management Systems (BMS), power systems studies, calculations and analysis with primary emphasis on Power Modules, IT Modules and Data Centers. The EE will design to customer specifications and requirements and will support all Electrical inquiries and business development activities. The EE will provide general electrical configuration designs for Data Centers, Telecommunications Central Office, Switching Centers, Video Hub Offices, etc. and will work directly with the module integration facility to develop a detailed drawing package for the integration of all electrical systems. The Electrical Engineer will provide single line signal wire diagrams and electrical diagrams that demonstrate electrical integration of UPS power systems, DC power systems, standby generator, grounding, cooling, fire protection, surveillance, BMS, lighting and other equipment in the building. This Individual will coordinate the facility power systems with architectural and mechanical designs, Factory and Site Acceptance Testing and commissioning. ESSENTIAL JOB FUNCTIONS: Serve as the lead Electrical Engineer (EE) on assigned projects from pre-sales to final commissioning stage. Create designs which meet or exceed quality requirements and fall within budgetary requirements. Design optimal UPS power systems and/or DC Power Systems based on customer equipment/IT loads. Design of switchgear configurations and control schemes, utilizing PLCs and/or relays, to accomplish automated transfer operations. Design of ground fault protective schemes, including those involving multiple sources. Generation of bills of material, and modification of standard assemblies as required to satisfy the application. Familiarity with Modbus and TCP/IP communications protocols, and RS-485 and Ethernet interfaces. Manage and Support contracted integration companies to provide a detailed Schematic Design(SD), Detail Design(DD) and Construction Drawing(CD) narrative for electrical design aspects of the solution Collaborate with other disciplines and external partners - General contractors or architects to create a construction document Work with business units, Business Partners and preferred vendors to specify the appropriate electrical equipment such as UPS, Switchgear, Generator, DC power system, etc. Provide detail sizing analysis of Standby Emergency generators based on type of loads - capacitance, inductance, motor loads, high/low inertia loads, UPS, lighting, etc. Work with local agencies having jurisdiction to ensure compliance with federal, state and municipal requirements/building codes. Review and approve electrical product submittals. Define project scope and provide technical support for information requests prior to and during construction phases. Quality control during integration of electrical systems Support for all on site integration support Define project scope and provide technical support for information requests prior to and during construction phases. Work with commissioning teams to properly test and validate installation, operation and performance of electrical systems. Travel to sites for site review and work with onsite field engineers, as well as provide engineering evaluations, electrical systems audits and start-up as needed. Offer creative, out of the box solutions to the customer. JOB QUALIFICATIONS: Bachelor's Degree in Electrical Engineering or possesses acceptable experience and subject knowledge Professional engineering (PE) License - optional Minimum 4 years of Electrical Engineering experience Knowledge of low voltage switchboard / switchgear design, installation, and use Knowledge of local, state, & federal codes governing the installation and use of low voltage switchboards/switchgear. Working knowledge in AutoDesk suite of Engineering software including AutoCAD and Revit Proven experience with Microsoft Office Applications Experience reading and interpreting electrical construction drawings and equipment specifications Understanding of the current version of the National Electrical Code Interpreting customer specification requirements. Have the ability to research new designs, technologies and construction methods for data center equipment and facilities Ability to think outside the box to find creative and innovative solutions to reduce costs with no impact on quality, reliability or maintainability. Must possess excellent communication skills both written and verbal. Must be detail oriented.

Market Advanced Manufacturing At Jacobs, we're challenging today to reinvent tomorrow by solving the world's most critical problems for thriving cities, resilient environments, mission-critical outcomes, operational advancement, scientific discovery and cutting-edge manufacturing, turning abstract ideas into realities that transform the world for good. Your impact We are searching for an Electrical Engineering Intern to join our Advanced Facilities - Specialized Manufacturing & Data Centers Team in Greenville, SC, Appleton, WI, Conshohocken, PA, or Pittsburgh, PA. As part of our team, you'll have the chance to work on projects that bring innovative solutions to our clients' challenges locally and worldwide. You'll collaborate with team members across disciplines and geographies, providing our clients with award-winning planning, engineering, architectural design, construction management, and design-build project delivery. During your internship, you will work on projects mainly focused on power distribution (both high and low voltage), system planning, and lighting design. Under the guidance of professional engineers, architects and other senior technical staff you will provide design services including coordinating with the design of other trades (architectural and engineering). You'll also take ownership of the completeness, accuracy and timeliness of the work assigned to you by demonstrating the ability to progress from basic design work assignments to more complicated and involved projects working in conjunction with a technical team. You'll be surrounded by expert mentorship opportunities to help you thrive in your new career. Working together, we'll help you grow and pursue what fulfills you so that we can make impacts on the future - big and small, global and local. If you're up for the challenge, we've been looking for someone just like you. Here's what you'll need * Enrollment in a degree seeking program for Electrical Engineering * Working knowledge of Microsoft Office Suite, specifically Excel * Basic knowledge of Revit, AutoCAD, SketchUp, basic rendering and publishing programs * Previous relevant internship experience Ideally, You'll Also Have: * Previous internship working with power distribution (both high and low voltage), system planning, and/or lighting design * 3.0+ GPA * Ability to work in the United States without sponsorship, now or in the future Posted Salary Range: Minimum 58,240.00 Posted Salary Range: Upper 74,000.00 Our health and welfare benefits are designed to invest in you, and in the things you care about. Your health. Your well-being. Your security. Your future. Employees have access to a 401(k) plan, as well as legally mandated benefits. The base salary range for this position is $58,240.00 to $74,000.00; though will be paid hourly based on hours worked. Within the range, individual pay is determined by work location and additional factors, including job-related skills, experience, and relevant education or training. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. Job posted on January 09, 2026. This position will be open for at least 3 days. We value collaboration and believe that in-person interactions are crucial for both our culture and client delivery. We empower employees with our hybrid working policy, allowing them to split their work week between Jacobs offices/projects and remote locations enabling them to deliver their best work. Your application experience is important to us, and we're keen to adapt to make every interaction even better. If you require further support or reasonable adjustments with regards to the recruitment process (for example, you require the application form in a different format), please contact the team via Careers Support. Locations CityStateCountryAppletonWisconsinUnited StatesConshohockenPennsylvaniaUnited StatesGreenvilleSouth CarolinaUnited StatesMoon TownshipPennsylvaniaUnited States

Job Description ELECTRICAL AND INSTRUMENTATION DESIGNER Seeking Electrical and Instrumentation Designer working with an EPC responsible for performing a broad range of electrical and instrumentation (E&I) design activities. You will work with an EPC offering competitive compensation, great work environment and projects to keep you challenged and engaged. The Electrical and Instrumentation Designer will: Produce detailed electrical schematics, wiring diagrams, power routing plans (cable tray and conduit), lighting design and control panel layouts using CAD software (2D and 3D) Ensure all designs comply with relevant electrical standards and codes (e.g., NEC, NFPA) Create cable schedules, conduit layouts, and terminal strip drawings Design control panels, incorporating PLCs (Programmable Logic Controllers), HMIs (Human-Machine Interfaces), VFDs (Variable Frequency Drives), and other automation components Draft and maintain P&IDs (Piping and Instrumentation Diagrams) and loop diagrams for control system documentation Assist in the development of I/O lists Preferred Qualifications Experienced in design of electrical and instrumentation systems for capital projects. Industries can include: chemical, petrochemical, pulp and paper, industrial, oil and gas Proficient in utilizing CAD systems.

Job Description Electrical Engineer Columbia, Greenville-Spartanburg-Anderson SC Direct Hire/ Permanent Placement $90k - $150k, REMOTE, Bonuses, Full benefits (med, dent, vision), 401k match, 5k sign-on Bonus THE CLIENT This particular client is a mid-sized (200-500 ppl, 7+ offices) firm who work on large-scale, complex building systems in healthcare, hospitality, retail/ restaurant, industrial, multi-unit residential, hi-rise, and commercial offices. OVERVIEW The ideal Candidate will want to run projects and mentor junior engineers and grow into a Discipline leader and then move upwards from there. ROLE/ RESPONSIBILITIES/ SKILLS/ EXPERIENCE • Electrical design of power distribution, lighting, fire alarm in accordance to NEC codes and standards • Electrical equipment calcs, selection, and layout of switchgear, transformers, electrical panels and emergency generators • Large scale and Complex building projects • Project Management • Site visits, Site Surveys, respond to RFIs, and reviewing shop drawings • Revit, AutoCAD, SKM, COMCheck, AGI 32 • Degreed BSEE BSAE or equivalent • EIT, PE, LEED Preferred • 5+ years of relevant experience * No Sponsorship available

Senior Electrical Engineer - Energy & Power Solutions Location Options: Ft. Worth, TX | Greenville, SC | Denver, CO | Philadelphia, PA | Cary, NC | Chicago, IL Type: Temp-to-Perm | Hybrid (minimum 2 days/week onsite when not traveling) Travel: Up to 50% (varies by project) Salary Range: $130,000 - $200,000 DOE Overview: An established engineering organization is expanding its Energy & Power Solutions team to support the growing demand for sustainable, reliable, and resilient energy infrastructure. We are seeking a Senior Electrical Engineer with deep expertise in utility and power projects to take a lead role in delivering engineering design, advisory services, and business development initiatives for complex energy projects. This role offers the opportunity to mentor junior staff, manage engineering teams, and collaborate directly with clients to develop and execute innovative energy solutions. Responsibilities: Lead electrical engineering teams in delivering design solutions and advisory services for utility, power generation, renewable energy, and energy storage projects. Review client needs, develop conceptual plans, and carry projects through detailed design to implementation. Provide technical leadership and mentorship to junior and mid-level engineers. Engage in business development, including client engagement, proposal development, and strategic pursuits. Manage project execution planning, scope development, and man-hour estimates. Ensure project deliverables meet quality, schedule, and budget expectations. Contribute to strategy formation, innovation, and expansion of energy transition and decarbonization portfolios. Collaborate across disciplines to integrate emerging technologies and sustainability solutions. Required Qualifications: Bachelor's or advanced degree in Electrical Engineering, Electrical Power Engineering, or related discipline. 10+ years of electrical engineering design and/or consulting experience, with a strong background in utility/power projects. Active Professional Engineer (PE) license in any U.S. state and ability to obtain licensure in other states as needed. Demonstrated success in client engagement, relationship building, and winning work. Experience in business growth strategy and exploration of new project opportunities. Strong project management skills, including proposal development and execution planning. Excellent communication and technical writing skills. Ability to work hybrid in one of the listed office locations and travel as needed. Preferred/Highly Valued Experience: Power distribution systems and microgrids. Power generation projects exceeding 10MW capacity. High-voltage (HV) and medium-voltage (MV) substation projects. Renewable energy projects (solar, wind, hydro, geothermal). Energy storage systems. Power system modeling using SKM Power Tools, ETAP, or similar software. Protection and control, SCADA, or power system automation. Campus utility master planning and decarbonization strategies. Cogeneration and combined heat and power systems. Thermal utility plants and distribution systems. Why Join: Career growth built into the mission, with clear leadership and technical advancement paths. Access to a global network of engineering expertise and innovation resources. Opportunities to work on diverse, high-impact energy projects across the U.S. Commitment to continuous learning, certifications, and professional development. Inclusive workplace culture where every voice is valued. Additional Details: PE License is required. Candidates on VISAs will not be considered.

Senior Engineer, Electrical Engineering DIV/DEPARTMENT NAME: Systems Products Division REPORTS TO: Director, Operations POSITION STATUS: Full-Time WORK STYLE DESIGNATION: Hybrid (+50% Onsite) WORK STYLE REQUIREMENT: Onsite 51% / Remote 49% WORK LOCATION: Greenville, SC (GSC) FLSA STATUS (E or N): Exempt TRAVEL REQUIREMENT: 5% POSITIONS SUPERVISED: N/A EXPECTED PAY RANGE: $118,129.42-$162,427.95 Annually The pay ranges listed above are for each position's base pay only. This position may be eligible for other compensation including incentive pay and/or allowances. Candidates will receive additional information during the interview and selection process. POSITION SUMMARY

Our client is growing their multi-discipline engineering practice and is seeking a licensed PE Electrical Engineer to lead the design of building electrical systems across a variety of commercial, industrial, and institutional projects. This is a hands-on engineering role with leadership responsibility, technical ownership, and the opportunity to mentor junior staff while working closely with clients . This is a direct hire position for our client. Salary: $70,000 to $120,000 Depending on Experience Location: Greenville, SC (100% Onsite) What You'll Do As a PE Electrical Engineer, you'll take ownership of electrical system design from concept through construction. Day-to-day responsibilities include: Design and engineer power distribution, lighting, and low-voltage systems Perform load calculations, short-circuit and fault current analysis, and coordination studies Develop single-line diagrams, panel schedules, wiring layouts, and technical specifications Produce and review drawings using AutoCAD and Revit (BIM) Support construction activities including site visits, submittal reviews, and commissioning Coordinate designs with mechanical, civil, and structural teams Mentor junior engineers/designers and provide QA/QC oversight Interface with clients, utilities, and vendors to ensure code compliance and on-time delivery Qualifications Bachelor's or Master's Degree in Electrical Engineering Active Professional Engineer (PE) license Strong experience with electrical power distribution, lighting, and low-voltage system design Proficiency in AutoCAD and Revit Working knowledge of NEC, IEEE, NFPA, and applicable state/local electrical codes Previous Project Management experience Forensic engineering or failure analysis experience a plus Renewable energy systems (solar PV), generators, or UPS systems experience a plus Client development or proposal writing experience a plus Why Join Us Work on diverse, technically challenging projects Be part of a collaborative, multi-discipline engineering team Opportunity for technical leadership and career growth Strong focus on engineering quality, mentorship, and long-term client relationships Stable schedule with short Fridays Limited Travel Apply today to join a collaborative engineering team where your expertise directly supports growth, quality, and client success.

Are you ready to be a key player in maintaining the efficiency and safety of a continuous manufacturing plant? We are looking for a passionate and proactive Electrical Controls Engineer II to join our team. In this role, youll have the opportunity to work directly with cutting-edge technologies, lead improvement projects, and maintain electrical and control systems that drive our daily operations. If you enjoy solving complex problems and working in a dynamic environment where your work truly matters, this is your chance. Duties Lead and execute electrical engineering projects related to equipment design, installation, integration, and support. Modify and troubleshoot electrical control circuits and PLC/HMI programs (Allen-Bradley and Siemens). Perform root cause analysis and develop corrective action plans. Support preventive, predictive, and corrective maintenance of plant equipment. Manage capital projects focused on electrical infrastructure and process control. Ensure compliance with electrical safety standards (NFPA 70E) and internal policies. Collaborate with maintenance and health, safety, and environmental teams to improve operations. Train and provide technical support to maintenance technicians. Support medium and high voltage power distribution systems (480V and 4160V). Qualifications Bachelors degree in Electrical Engineering or related field (required). Minimum of 3 years experience in manufacturing environments (required). Experience with Allen-Bradley PLCs, HMIs, and variable speed drives (required). Knowledge of Siemens PLCs and WonderWare is a plus. Familiarity with electrical safety standards and arc flash hazards. Ability to read electrical schematics and use AutoCAD. Strong analytical and problem-solving skills. Six Sigma or Lean Manufacturing certifications are a plus. Authorization to work in the U.S. Additional Details Job Type: Full-time Work Location: On-site Relocation Assistance: Available for ideal candidates Travel: Occasional domestic and international travel Salary: $95,000.00 - $127,000.00 per year Job Type: Full-time

KEMET Electronics Corporation We at KEMET, a YAGEO Group company, help make a wide variety of products possible in the world's most rapidly expanding industries. Founded in 1919 in Cleveland, Ohio, with over 100 years of technological innovation, we manufacture capacitors and other components for computing, telecommunications, medical, aerospace, defense, and automotive markets. Our components are found in spacecrafts and defibrillators - from outer space to inside our bodies, and in products we use every day. We have the broadest selection of capacitor technologies in the industry, including an expanding range of electromechanical devices and electromagnetic compatibility solutions. Summary We are currently seeking an Electrical Testing Engineer in Simpsonville, SC. This position works with an experienced, small team of engineers and technicians to build original equipment designs and troubleshoot existing equipment as needed. The role focuses on participation on-site in a multidisciplinary team of engineers and technicians in the KEMET Ceramics Equipment Engineering group designing, building, and deploying equipment necessary for the manufacture and testing of ceramic capacitors (MLCCs). Key Responsibilities * Develop test plans and procedures for equipment to be used in various manufacturing and lab areas within the Ceramics Business Unit. * Create complex electrical schematics for measuring Cap, Df, IR, and other electrical characteristics of ceramic capacitors * Collaborate with other engineers to develop custom and/or modify equipment to meet new manufacturing goals. * Plan timelines and objective with project managers and customers targets in focus. * Work with suppliers and outside experts to continue to improve KEMET equipment and processes. * Interface with various groups such as production and R&D Required Qualifications * B.S. in Electrical Engineering, Computer Engineering or other related STEM degree. * Must have high proficiency with Microsoft Office products. * Must be a team player, a self-starter, have a good work ethic, effective time management skills, creativity, analytical skills, and strong communication skills * AutoCAD experience or other electrical focused design tool. * Strong knowledge of DC, AC, Resistance, Amperage, and Frequencies related to electronic components * Experience developing circuits, diagrams and schematics for various test applications in a production environment. * Experience with circuit board design and assembly. * Experience working with industrial meters and PSUs (Agilent/Keysight, Keithley, KEPCO, Chroma, etc.) * Hands on experience with wiring and soldering to assist with the equipment assembly and debug * Some familiarity with safety standards and codes (e.g., NEC, OSHA) * Focus on organization when managing drawing series and BOM's * Ability to remain in a stationary position (seated/standing) for extended periods Location and Work Type * Simpsonville, SC - United States * Full Time * 10% of occasional domestic and international travel will be required This job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee. Duties, responsibilities, and activities may change, or new ones may be assigned at any time with or without notice. Yageo does not discriminate on the basis of race, color, age, sex, gender, sexual orientation, gender identity and expression, ethnicity or national origin, disability, pregnancy, religion, political affiliation, union membership, protected veteran status, protected genetic information, marital status or any other characteristic protected by applicable federal, state or local law in making employment decisions including but not limited to hiring, wages, promotions, rewards, and access to training. Qualified applicants and workers shall be provided with reasonable accommodation for disability and religious practices. What we offer * Collaborative work environment that values innovation and teamwork * Inclusive company culture built on respect, integrity, and continuous improvement * Career growth opportunities with access to training, and mentorship * Work-life balance support through flexible practices and employee wellness initiatives * Comprehensive benefits package including health, retirement, and employee programs * Global impact by contributing to sustainable solutions and industry-leading technologies About YAGEO Group We don't build the final product. We build what makes it possible. From resistors to capacitors, inductors to sensors-our components power the breakthroughs that move the world forward. Electric vehicles. AI data centers. Satellites. Sonar systems. They move faster, last longer, reach farther-with a spark of us inside. Headquartered in Taiwan, YAGEO Group unites multiple trusted brands-including YAGEO, KEMET, PULSE, and Telemecanique Sensors and more-into one cohesive force for innovation. 40,000+ employees. 100+ locations. 20 R&D centers. 2,000+ patents. 273,000+ customers. #1 in resistors and tantalum capacitors. #3 in MLCCs & inductors We don't just participate in the future-we enable it. Why Work at YAGEO Group? Meaningful work: Every part you help design, test, or improve contributes to real-world innovations. Global exposure: Collaborate across continents, brands, and breakthrough technologies. Accelerated growth: With our size, diversity, and momentum, there's no ceiling for where you can go. Built-in purpose: You're not just part of the process-you're part of the progress. YAGEO Group. Built into Tomorrow. Learn more at **************************** #FollowUs for updates! #Electronics #Innovation #TechCareers #WeAreHiring #LI-RH1

Responsibilities and Measurement Criteria with Time investment Needed on Each: (This will describe the overall core responsibilities of the role, decision making responsibilities etc.) Design and development of UPS subsystems/components in compliance with specifications, EMC/EMI requirements, and applicable standards. PCB design. Detailed analysis of UPS electronic subsystems/components, focusing on performance evaluation, design optimization, component selection and sizing, and control strategy. Collaboration in an interdisciplinary engineering environment (with embedded, test, and mechanical engineers) to define requirements, discuss trade-offs, participate in design verification, and ensure successful integration of single-phase UPS designs. Continuous improvement of existing designs, evaluation of application issues, and resolution of those issues in the design of new products. Evaluation of new technologies to enhance and implement them in new R&D systems and processes. Adherence to agreed-upon project timelines. Preparation of relevant technical reports. Qualifications: Required/ Minimum Qualifications: Master's degree or higher in Electrical Engineering with a focus on power electronics. Proficiency in medium-to-low power circuit topologies, principles of power electronic converters, and semiconductor devices. Additional / Preferred Qualifications: - Hands-on experience with PCB design and layout. Knowledge of electronic design practices for EMC compliance. Strong analytical skills combined with excellent problem-solving abilities and interpersonal communication. Experience in UPS and power module development is highly desirable. Physical & Environmental Requirements: - (To be used majorly for manufacturing jobs.) None Time Travel Needed: 10% OUR CORE PRINCIPALS: Safety. Integrity. Respect. Teamwork. Diversity & Inclusion. OUR STRATEGIC PRIORITIES Customer Focus Operational Excellence High-Performance Culture Innovation Financial Strength OUR BEHAVIORS Own It Act With Urgency Foster a Customer-First Mindset Think Big and Execute Lead by Example Drive Continuous Improvement Learn and Seek Out Development At Vertiv, we offer the stability of a global leader in a growing industry and the opportunity of a startup. We design, manufacture and service the mission-critical infrastructure technologies for vital applications in data centers, communication networks and commercial and industrial environments. With $5 billion in sales, a strong customer base and global reach in nearly 70 countries, our move to establish a standalone business enables us to deliver greater value to our customers and create new opportunities for our people. Vertiv is an Equal Opportunity/Affirmative Action employer. We promote equal opportunities for all with respect to hiring, terms of employment, mobility, training, compensation, and occupational health, without discrimination as to age, race, color, religion, creed, sex, pregnancy status (including childbirth, breastfeeding, or related medical conditions), marital status, sexual orientation, gender identity / expression (including transgender status or sexual stereotypes), genetic information, citizenship status, national origin, protected veteran status, political affiliation, or disability. If you have a disability and are having difficulty accessing or using this website to apply for a position, you can request help by sending an email to ...@vertivco.com . If you are interested in applying or learning more about this role, please visit the company's career page located on Vertiv.com/Careers Work Authorization No calls or agencies please. Vertiv will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas such as E, F-1, H-1, H-2, L, B, J, or TN or who need sponsorship for work authorization now or in the future, are not eligible for hire. #LI-CM1

About Us We are a power-generation technology test laboratory focused on advancing turbine technology and next-generation energy systems. Our mission is to validate, optimize, and accelerate reliable, efficient, and sustainable power generation solutions. Position Overview Join our test lab team in a hands-on role that blends electrical and controls engineering. You will work with senior engineers and technicians to design, implement, and troubleshoot test systems, instrumentation, and automation used to validate power-generation technologies. This role is ideal for someone eager to grow into a dual-scope engineer, bridging electrical systems and controls in a power-generation testing environment. Job Description Roles and Responsibilities Electrical Engineering * Design and documentation: Create and update single-line diagrams, schematics, and wiring diagrams; support wiring and commissioning. * Power systems: Support distribution, grounding, and protection for test rigs and lab equipment. * Calculations: Perform load, equipment sizing, voltage drop, and grounding calculations. * Installation and testing: Assist with installation, commissioning, testing, and troubleshooting; analyze data to verify performance. * Safety and compliance: Apply relevant safety and design standards; support inspections. Controls Engineering * Programming and configuration: Develop and modify PLC, HMI, and SCADA logic for test systems. * Troubleshooting and optimization: Debug and tune control systems for power-generation applications. * System integration: Automate test procedures and integrate sensors, actuators, and industrial protocols (e.g., Modbus, EtherNet/IP). * Documentation: Maintain electrical drawings, instrument lists, and operating procedures. * Collaboration: Work with cross-functional teams to ensure reliable test rig and monitoring system operation. General * Document Controls and Electrical testing procedures, results, and system configurations. * Participate in troubleshooting sessions and root-cause analysis. * Contribute to continuous improvement of lab processes. * Work under guidance while building technical independence. Required Qualifications Bachelor's degree in Electrical Engineering, Controls Engineering, Mechatronics, or related field and equivalent experience * 0-3 years of relevant experience (internships, co-ops, and projects count). * Familiarity with electrical schematics, wiring practices, and instrumentation. * Basic knowledge of PLC programming and industrial communication protocols (e.g., Modbus, EtherNet/IP). Eligibility: * This role is 100% onsite at the GE Vernova Greenville, SC test lab facility * Must be legally authorized to work in the USA without sponsorship now or in the future Desired Characteristics * Experience with C, Python, LINUX, MATLAB/Simulink, LabVIEW, or similar tools. * Exposure to power-generation systems (turbines, generators, power electronics). * Hands-on experience with test equipment and instrumentation * Knowledge of electrical studies (short circuit, arc flash). * Familiarity with CAD (e.g., AutoCAD). * Knowledge of industry standards (IEEE, IEC, NFPA). This role requires access to U.S. export-controlled information. If applicable, final offers will be contingent on ability to obtain authorization for access to U.S. export-controlled information from the U.S. Government. Additional Information GE Vernova offers a great work environment, professional development, challenging careers, and competitive compensation. GE Vernova is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Vernova will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Relocation Assistance Provided: Yes For candidates applying to a U.S. based position, the pay range for this position is between $71,600.00 and $107,400.00. The Company pays a geographic differential of 110%, 120% or 130% of salary in certain areas. The specific pay offered may be influenced by a variety of factors, including the candidate's experience, education, and skill set. Bonus eligibility: discretionary annual bonus. This posting is expected to remain open for at least seven days after it was posted on December 03, 2025. Available benefits include medical, dental, vision, and prescription drug coverage; access to Health Coach from GE Vernova, a 24/7 nurse-based resource; and access to the Employee Assistance Program, providing 24/7 confidential assessment, counseling and referral services. Retirement benefits include the GE Vernova Retirement Savings Plan, a tax-advantaged 401(k) savings opportunity with company matching contributions and company retirement contributions, as well as access to Fidelity resources and financial planning consultants. Other benefits include tuition assistance, adoption assistance, paid parental leave, disability benefits, life insurance, 12 paid holidays, and permissive time off. GE Vernova Inc. or its affiliates (collectively or individually, "GE Vernova") sponsor certain employee benefit plans or programs GE Vernova reserves the right to terminate, amend, suspend, replace, or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a GE Vernova welfare benefit plan or program. This document does not create a contract of employment with any individual.

Techtronic Industries is a fast-growing world leader in Power Tools, Accessories, Hand Tools, Outdoor Power Equipment, and Floor Care for Do-It-Yourself (DIY). The Company is committed to accelerating the transformation of these industries through superior environmentally friendly cordless technology. At TTI Anderson, our brands RYOBI and HART are recognized worldwide for their deep heritage and cordless product platforms of superior quality, outstanding performance, safety, productivity, and compelling innovation. The Electrical Engineer II will lead the design and implementation of embedded systems in Outdoor Equipment category. You will work through the product development process in a team environment interacting with cross-functional stakeholders such as hardware, firmware, product development, and test engineers. This position will sit onsite at our headquarters in Anderson, South Carolina. Primary Job Functions: * Execute a lead role for the design, prototype, test and troubleshoot embedded electronics hardware and firmware for mid to high complexity projects. * Provide expertise and engineering support on high complexity projects. * Use laboratory equipment to debug and develop your design with oscilloscopes, power supplies, electronic loads, spectrum analyzers, ESD/EMC, data acquisition systems, and analysis software. * Effectively communicate and motivate up, down and across the organization to a diverse range of technical and non-technical team members. * Drive urgency in project schedules and accountability for establishing and achieving key project metrics that meet the organization's needs. * Independently track projects to ensure adherence to schedule and the TTi product development process. Required Job Qualifications: * Bachelor's Degree in Electrical Engineering, Computer Engineering, or related field * 3+ years of experience in the Embedded Electronics design field including 32-bit microcontroller-based circuits. * Demonstrated design experience in motor drives in embedded hardware and firmware implementations. * Self-motivated, organized, efficient, process oriented with a strong work ethic. * Excellent problem-solving skills, exercises independent judgement and works well under pressure in a dynamic environment. * Excellent communication and interpersonal skills.

Job Title: Senior Electrical Engineer Work Schedule: Onsite | 4-day workweek (4 × 10-hour shifts) Employment Type: Full-Time | Permanent Department: Engineering Salary & Compensation Base Salary: $100,000 - $120,000 annually Bonus: Variable incentive plan (VIP) up to 20% (10% target) Final compensation will be based on experience and qualifications. Role Overview We are seeking a Senior Electrical Engineer to support manufacturing operations at a large industrial facility in Graniteville, SC. This role focuses on electrical controls, industrial automation, and plant support, with responsibility for PLC programming, system troubleshooting, and electrical safety compliance. The ideal candidate is a self-starter with strong technical expertise and the ability to manage projects, budgets, and contractors effectively. Key Responsibilities Design, develop, troubleshoot, and support electrical control systems for manufacturing equipment Program and maintain Allen-Bradley PLCs, remote I/O, HMIs, and Rockwell Automation software Diagnose and resolve complex electrical and automation issues to minimize downtime Manage capital and expense budgets to support plant objectives Support industrial Ethernet communication networks and machine-level networking Ensure compliance with equipment safety standards, including arc flash requirements per NFPA 70E Coordinate and oversee contractors and maintenance technicians Collaborate with cross-functional teams to support production, maintenance, and continuous improvement initiatives Required Qualifications Bachelor's degree in Electrical Engineering or a related technical field 5+ years of experience in electrical engineering and industrial automation Strong hands-on experience with Allen-Bradley PLCs and Rockwell Automation software Proven PLC programming and troubleshooting skills Experience with industrial Ethernet communication and network architecture Knowledge of electrical equipment safety, hardware design, and component selection Strong work ethic with a self-starter mindset Preferred Qualifications Experience in a manufacturing or industrial environment Strong communication and negotiation skills Experience managing contractors and maintenance personnel Additional Information Onsite role (no remote option) Relocation assistance not available Visa sponsorship not available

We are seeking an Electrical Engineer for our client located in Graniteville, SC in the Engineering field.Apply and create that opportunity to enhance your electrical engineering career! Onsite: Graniteville, SC, US Salary: USD $100,000 - $120,000 / yr Additional variable compensation? Yes Available Relocation: none Is sponsorship possible? no Primary Responsibilities: Responsible for electrical expertise in single/multiple areas of the plant. · Lead continuous improvement and corrective action activities & projects. · Provide technical support to internal customers. · Project Management -Manage major projects such as New Machine installation, upgrades etc. The Projects range from $50K to $1M and require that you · Analyze project requirements, identify and address design parameters, engineering challenges and to ensure solutions are implemented accurately, timely and within budget. ·Oversee project workflow and support internal and external resources to ensure on-time delivery of projects, meeting quality standards and within budget. · Ensure all relevant safety objectives and legal requirements, for all activities, are observed and implemented. Engineering: · Create and finalize designs to meet project scope of work and safety requirements, Bill of Materials and spare part requirements. · Work closely with Automation Vendors and Manage External Contractors on Installations. · Engineering drawing development. (Autodesk products) · Project/Equipment Risk Assessment & Safety Countermeasure Implementation. · Hardware design, PLC and HMI programming, VFDs, Servos, Control System Networking & Systems integration. · Specification and procurement of electrical hardware and services. · Machine FAT, IO check-out, Machine start-up and commissioning. Must-haves Strong work ethic and self-starter attitude Ability to manage capital and expense budgets to meet plant objectives Required Skills Proficiency with Allen Bradley PLC's, remote IO, Human Machine Interface, and associated Rockwell software Troubleshooting and programming PLC's Experience with industrial ethernet communication and machine network layout Knowledge of equipment safety, including hardware design, component selection, and arc flash requirements per NFPA 70E Preferred or Nice-to-have Skills Strong communication and negotiation skills for internal and external stakeholder relationships Experience managing contractors and maintenance technicians Ability to design, develop, and oversee electrical control systems Years of Experience: 5+ years and experience with Allen Bradley PLC's and industrial automation is required. Industry Experience: Experience in a manufacturing or industrial setting is preferred, with knowledge of production and maintenance processes. Education Requirements: A degree in a relevant field such as electrical engineering or a related technical field.

←Back to all jobs at INFINTIUM INC Junior Electrical Engineer INFINTIUM INC is an EEO Employer - M/F/Disability/Protected Veteran Status Company: infintium is a leader in hydrogen fuel cell power production, leveraging innovative engineering to create best-in-class solutions for demanding industrial applications. Role: Junior Electrical Engineer (Entry-Level) We are seeking a motivated and hands-on Junior Electrical Engineer to join our innovative team in developing next-generation hydrogen fuel cell power systems. This position is ideal for a recent graduate or early-career engineer who is passionate about renewable energy and eager to learn. What You'll Do: You will provide critical support in the design, assembly, testing, and troubleshooting of our systems. Who You Are: · Possess strong foundational skills in electrical engineering. · Have a "get-your-hands-dirty" mentality. · Eager to learn and grow into an expert role. Location: Our corporate headquarters is in Greenville, SC, just minutes from the Greenville Spartanburg International Airport (GSP). Responsibilities / Duties: Assist in the creation and modification of electrical schematics, wire harness drawings and bill of materials. Prepare documentation for safety and compliance standards (UL, ISO, IEC Etc.). Participate in DFMEA activities. Participate in design reviews with internal and external stakeholders. Prepare and execute testing on components and sub systems using power supplies, electronic / resistive loads, oscilloscopes, multimeters and data acquisition systems. Perform troubleshooting of electronic circuitry to determine root cause of electrical failures. Prepare and present test data to senior engineers. Fabricate harnesses as needed to expedite testing and validation. Support PCB design for power electronics and IOT systems Required Qualifications / Skills: B.S. in Electrical Engineering (BSEE) or Electrical Engineering Technology (BSEET) from an accredited university Hands-on experience Co-op / internship experience FSAE, BAJA or other related collegiate competitions / organizations Proficiency with multimeters, oscilloscope, power supplies, and other tools to diagnose electrical problems within a complex system Ability to read and interpret electrical schematics and wiring diagrams Self motivated, problem solver with the ability to work both independently and on teams Desired Qualifications / Skills: Interest / familiarity with lithium-ION batteries or Fuell Cell systems Experience with power electronics / design Experience designing for EMI mitigation and EMC compliance testing Familiarity with CAN communication protocols Experience with CAD programs as they relate to electrical design Altium SolidWorks Electrical Applicants must be authorized to work for ANY employer in the U.S. We are unable to sponsor or take over sponsorship of an employment Visa at this time. Please visit our careers page to see more job opportunities.

Greenville, SC Area (P.E. Preferred) A well-established engineering firm in the Greenville, SC area is seeking an experienced Electrical Engineer to join their expanding team. This position offers the opportunity to work on diverse and impactful projects in a collaborative environment. If you are a licensed Professional Engineer (P.E.) with expertise in electrical design, we encourage you to apply. Key Responsibilities System Design: Develop electrical systems for commercial, institutional, industrial, healthcare, and multifamily projects, including AC power distribution, lighting, fire alarms, and building support systems. Team Leadership: Supervise and review work performed by project designers. Collaboration: Coordinate with clients, contractors, utility providers, project managers, and multidisciplinary teams to meet project requirements. Engineering Calculations: Perform calculations such as voltage drop, fault current, photometrics, and energy code compliance. Power Distribution: Design comprehensive systems, including panelboards, transformers, raceways, wiring devices, and generators. Code Compliance: Ensure designs adhere to applicable codes and standards, such as NEC, NFPA, and energy codes. Documentation: Prepare and review specifications, shop drawings, and field reports during construction administration. Qualifications Bachelor's degree in Electrical Engineering from an ABET-accredited program. Licensed Professional Engineer (P.E.), with eligibility in multiple states preferred. Minimum of 5 years' experience in electrical design for building systems. Proficiency with Microsoft Word, Excel, and Outlook. Experience with design software such as AutoCAD, Revit MEP, and SKM is highly desirable. Strong knowledge of electrical codes and standards, including NEC and NFPA. Excellent communication and organizational skills. Preferred Skills Proven leadership in managing electrical design efforts for projects with minimal oversight. Familiarity with lighting design tools such as ElumTools and Lithonia Visual. Construction administration experience, including reviewing submittals, inspecting work, and addressing RFIs. Project management experience is a plus. This is an exciting opportunity to join a reputable firm in the Greenville, SC area, contribute to impactful projects, and grow your career. Apply now to become part of a dynamic team committed to excellence.

KEMET Electronics Corporation We at KEMET, a YAGEO Group company, help make a wide variety of products possible in the world's most rapidly expanding industries. Founded in 1919 in Cleveland, Ohio, with over 100 years of technological innovation, we manufacture capacitors and other components for computing, telecommunications, medical, aerospace, defense, and automotive markets. Our components are found in spacecrafts and defibrillators - from outer space to inside our bodies, and in products we use every day. We have the broadest selection of capacitor technologies in the industry, including an expanding range of electromechanical devices and electromagnetic compatibility solutions. Summary We are currently seeking an Electrical Testing Engineer in Simpsonville, SC. This position works with an experienced, small team of engineers and technicians to build original equipment designs and troubleshoot existing equipment as needed. The role focuses on participation on-site in a multidisciplinary team of engineers and technicians in the KEMET Ceramics Equipment Engineering group designing, building, and deploying equipment necessary for the manufacture and testing of ceramic capacitors (MLCCs). Key Responsibilities Develop test plans and procedures for equipment to be used in various manufacturing and lab areas within the Ceramics Business Unit. Create complex electrical schematics for measuring Cap, Df, IR, and other electrical characteristics of ceramic capacitors Collaborate with other engineers to develop custom and/or modify equipment to meet new manufacturing goals. Plan timelines and objective with project managers and customers targets in focus. Work with suppliers and outside experts to continue to improve KEMET equipment and processes. Interface with various groups such as production and R&D Required Qualifications B.S. in Electrical Engineering, Computer Engineering or other related STEM degree. Must have high proficiency with Microsoft Office products. Must be a team player, a self-starter, have a good work ethic, effective time management skills, creativity, analytical skills, and strong communication skills AutoCAD experience or other electrical focused design tool. Strong knowledge of DC, AC, Resistance, Amperage, and Frequencies related to electronic components Experience developing circuits, diagrams and schematics for various test applications in a production environment. Experience with circuit board design and assembly. Experience working with industrial meters and PSUs (Agilent/Keysight, Keithley, KEPCO, Chroma, etc.) Hands on experience with wiring and soldering to assist with the equipment assembly and debug Some familiarity with safety standards and codes (e.g., NEC, OSHA) Focus on organization when managing drawing series and BOM's Ability to remain in a stationary position (seated/standing) for extended periods Location and Work Type Simpsonville, SC - United States Full Time 10% of occasional domestic and international travel will be required This job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee. Duties, responsibilities, and activities may change, or new ones may be assigned at any time with or without notice. Yageo does not discriminate on the basis of race, color, age, sex, gender, sexual orientation, gender identity and expression, ethnicity or national origin, disability, pregnancy, religion, political affiliation, union membership, protected veteran status, protected genetic information, marital status or any other characteristic protected by applicable federal, state or local law in making employment decisions including but not limited to hiring, wages, promotions, rewards, and access to training. Qualified applicants and workers shall be provided with reasonable accommodation for disability and religious practices. What we offer Collaborative work environment that values innovation and teamwork Inclusive company culture built on respect, integrity, and continuous improvement Career growth opportunities with access to training, and mentorship Work-life balance support through flexible practices and employee wellness initiatives Comprehensive benefits package including health, retirement, and employee programs Global impact by contributing to sustainable solutions and industry-leading technologies About YAGEO Group We don't build the final product. We build what makes it possible. From resistors to capacitors, inductors to sensors-our components power the breakthroughs that move the world forward. Electric vehicles. AI data centers. Satellites. Sonar systems. They move faster, last longer, reach farther-with a spark of us inside. Headquartered in Taiwan, YAGEO Group unites multiple trusted brands-including YAGEO, KEMET, PULSE, and Telemecanique Sensors and more-into one cohesive force for innovation. 40,000+ employees. 100+ locations. 20 R&D centers. 2,000+ patents. 273,000+ customers. #1 in resistors and tantalum capacitors. #3 in MLCCs & inductors We don't just participate in the future-we enable it. Why Work at YAGEO Group? Meaningful work: Every part you help design, test, or improve contributes to real-world innovations. Global exposure: Collaborate across continents, brands, and breakthrough technologies. Accelerated growth: With our size, diversity, and momentum, there's no ceiling for where you can go. Built-in purpose: You're not just part of the process-you're part of the progress. YAGEO Group. Built into Tomorrow. Learn more at *************************** . #FollowUs for updates! #Electronics #Innovation #TechCareers #WeAreHiring #LI-RH1

Ready to power up your career? Join a dynamic manufacturing environment where innovation meets precision. We're looking for an Electrical Engineer who thrives on solving complex challenges and driving operational excellence. Why You'll Love This Role Work with advanced automation and control systems. Lead impactful projects that improve performance and efficiency. Enjoy competitive pay, bonus opportunities, and comprehensive benefits. Key Responsibilities Observes OSHA and company safety rules and always uses the proper safety equipment. Identifies potentially dangerous electrical hazards and takes immediate corrective action. Demonstrates advanced National Electrical Code understanding by teaching others. Develop Safety Procedures for installed machines - Lock-Out /Tag-Out for operations and maintenance personnel. Leads/supports internal Engineering, Maintenance, Production, OEMs, vendors, and contractors to design, install, interface, start up new equipment and process controls. This including electrical component selection and approval, electrical design approval, software assessments & modifications, machine acceptance testing and problem identification and resolution. Assist Production, Maintenance, and Engineering to meet daily priorities, coverage, and special projects. Responsible for specifying, Power Distribution, Drives, Motors, DCS, PLC, HMI, Servo Systems, Instrumentation and Data collection and Analysis software, based on our companies controls standards criteria. Evaluates electrical equipment from multiple sources and recommends best value for use. Performs high level troubleshooting, in-depth critical thinking, and utilizes all internal & external resources to solve any electrical, mechanical or process problem. Leads & assists others in troubleshooting machinery, equipment, components, and programs including Power Distribution, Drives, Motors, DCS, PLC, HMI, Servo systems and Robotics. Proactively identifies opportunities to increase production operation performance. Initiates, leads, and oversees improvement projects through completion. Assesses, designs, and makes complex program modifications in DCS, PLC, HMI, and servo controller logic to improve individual equipment and overall system's performance. Provides technical and operation training to Controls team, Production, Warehouse, and other personnel as needed. Shares knowledge and techniques with team members and coordinates the training of personnel to enhance troubleshooting skills. Provides direction and assistance as necessary for off shift/afterhours support. What You Bring Bachelor's Degree in Electrical Engineering or related degree program. Minimum of 3 years industrial controls experience including advanced knowledge of electrical theory and principles of operation. Advanced knowledge of electrical theory and principles of operation, including Power Distribution, Grounding, Medium Voltage Drives, Coordinated Drives, AC Motors, Bonding, DCS, PLC, HMI, Robotics, and Servo Systems. Knowledge of Mechanical, Pneumatic, and Hydraulic systems Experience with system management such as backup/archiving and restoring. Experience of industrial control networks (OT networks) set up, security and troubleshooting. Proven ability to lead complex electrical & control engineering projects $50k-$500k+. Excellent oral and written communication skills, including technical writing, computer skills, reasoning, and mathematical skills. Strong troubleshooting, analytical, and problem-solving skills. Sound interpersonal skills and the ability to work within a team environment. A safety-oriented mindset with the desire to enforce and follow mill safety and environmental policies and procedures. Excellent computer skills, including CMMS, MS Office, AutoCAD, and scheduling software. Benefits & Perks Competitive base salary and quarterly and annual bonus structure Paid time off (three-week minimum) Medical, dental and vision starting day one 401(k) with employer match Paid parental leave Child and family care assistance (dependent care FSA with employer match up to $2500) Bundle of joy benefit (years' worth of free diapers to all team members with a new baby) Tuition assistance Wellness program with savings of up to $4,000 per year on insurance premiums ...and more! Keywords for SEO: Electrical Engineer, Industrial Automation, PLC Programming, DCS Systems, Servo Control, Power Distribution, Manufacturing Engineering, Troubleshooting, Preventive Maintenance, Robotics Integration.

Job DescriptionElectrical / Controls Engineer Direct Hire Our client is seeking an experienced Electrical / Controls Engineer to join their manufacturing facility in Anderson, SC. In this role, you will design, implement, and support complex control systems and automation solutions across production equipment while serving as a technical leader and mentor to Controls Technicians. This position plays a critical role in equipment performance, safety, and continuous improvement across our operations. Key Responsibilities Promote and enforce OSHA and company safety standards, always using proper safety equipment Identify and immediately correct electrical safety hazards Demonstrate advanced knowledge of the National Electrical Code (NEC) and coach others on best practices Develop and maintain machine safety procedures, including Lock-Out/Tag-Out (LOTO) for operations and maintenance teams Lead and support cross-functional teams (Engineering, Maintenance, Production), OEMs, vendors, and contractors during equipment design, installation, startup, and commissioning Review and approve electrical designs, components, and control system software modifications Support machine acceptance testing, troubleshoot startup issues, and resolve complex electrical and controls problems Specify and support power distribution systems, drives, motors, PLCs, DCS, HMIs, servo systems, robotics, instrumentation, and data collection platforms in accordance with company standards Evaluate electrical equipment from multiple suppliers and recommend best-value solutions Perform advanced troubleshooting of electrical, mechanical, and process issues, leading and mentoring others through root-cause resolution Identify opportunities to improve equipment reliability, throughput, and overall operational performance Lead continuous improvement and capital projects from concept through completion Design and implement complex program modifications in PLC, DCS, HMI, and servo control systems Provide technical training and operational support to Controls, Production, Maintenance, Warehouse, and other teams Support off-shift and after-hours troubleshooting as needed Qualifications Bachelors degree in Electrical Engineering or a related technical field Minimum of 3 years of industrial controls or electrical engineering experience in a manufacturing environment Strong working knowledge of: Power distribution, grounding, bonding, and coordinated drives AC motors, medium-voltage drives, servo systems, and robotics PLC, DCS, and HMI platforms Working knowledge of mechanical, pneumatic, and hydraulic systems Experience with control system backups, archiving, and recovery Experience with industrial OT networks, including setup, security, and troubleshooting Proven ability to lead complex automation or electrical projects Strong troubleshooting, analytical, and problem-solving skills Excellent verbal and written communication skills, including technical documentation Ability to work collaboratively in a team-oriented manufacturing environment Strong safety mindset with a commitment to environmental and workplace safety policies Proficiency with CMMS systems, Microsoft Office, AutoCAD, and scheduling software