Electrical engineer internship jobs in Merced, CA

As an ASIC Design Engineer you will contribute to the design and development of high-performance processor and SoC technologies. In this role, you will be responsible for: Key Responsibilities Microarchitecture Development & Specification: Drive the process from early high-level architectural exploration and research through detailed microarchitecture definition and specification. RTL Design & Optimization: Develop, evaluate, and refine RTL implementations to achieve power, performance, area, and timing objectives. Design Delivery: Collaborate with cross-functional teams to deliver physical designs that meet timing, area, power, reliability, and testability goals. Validation: Support verification teams in building test benches, performing simulations, and ensuring functional and performance correctness. Performance Analysis: Explore high-performance architectural strategies and validate RTL correlation with target performance metrics. Requirements Strong understanding of microprocessor or SoC design, with 6+ years of experience in one or more of the following domains: High-performance cache controllers (pipeline design, hazard detection, parity/ECC, coherency and replacement policies) Coherent on-chip interconnects/fabrics for high-performance SoCs, including control structure design Proficiency in SystemVerilog Hands-on experience with simulators and waveform debugging tools Solid grasp of logic design principles and their timing/power implications Familiarity with low-power and high-performance microarchitecture techniques Experience programming in C or C++

Yoh is looking for a Electrical Test Engineer to come in and join our Biotech/ Pharma client for their state of the art manufacturing building. The ideal individual will come in with Bachelor's degree in Engineering: Mechanical, Electrical or Manufacturing with 7+ years of experience, or MS/ PhD with 5-7 years of experience. Industry: Bio Tech/ manufacturing Location: Pleasanton CA Compensation: $60-68/hour DOE Type: 6 month Contract Responsibilities Interfaces with design engineering and Product Management to coordinate the release of new products. Work with design engineering to provide DFM/A feedback during the design phase. Design and develop manufacturing test fixtures as required. Proactively communicate technical information and status to broad, cross-functional teams Develop and refine acceptance test processes and specifications of complex electromechanical subsystems while working cross functionally with manufacturing, R&D, and contract manufacturers. Required Skills (NPI Test Engineer) Bachelor's degree in Engineering: Mechanical, Electrical or Manufacturing with 7+ years of experience, or MS/ PhD with 5-7 years of experience. Work history with several successful iterations of Design to Manufacturing transfers. Creation of FMEAs, ECOs and work instructions Working knowledge of motor (eg., servo, stepper), PCA, and subassembly testing Experience with designing and testing PCB Experience working with instrument manufacturing under ISO 9001 or ISO 13485 standards Experience with Altium, Python, and SDK development Experience with Snowflake, Labview, and MES systems a plus Estimated Min Rate: $60.00 Estimated Max Rate: $68.00 What's In It for You? We welcome you to be a part of the largest and legendary global staffing companies to meet your career aspirations. Yoh's network of client companies has been employing professionals like you for over 65 years in the U.S., UK and Canada. Join Yoh's extensive talent community that will provide you with access to Yoh's vast network of opportunities and gain access to this exclusive opportunity available to you. Benefit eligibility is in accordance with applicable laws and client requirements. Benefits include: Medical, Prescription, Dental & Vision Benefits (for employees working 20+ hours per week) Health Savings Account (HSA) (for employees working 20+ hours per week) Life & Disability Insurance (for employees working 20+ hours per week) MetLife Voluntary Benefits Employee Assistance Program (EAP) 401K Retirement Savings Plan Direct Deposit & weekly epayroll Referral Bonus Programs Certification and training opportunities Note: Any pay ranges displayed are estimations. Actual pay is determined by an applicant's experience, technical expertise, and other qualifications as listed in the job description. All qualified applicants are welcome to apply. Yoh, a Day & Zimmermann company, is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. Visit ************************************************ to contact us if you are an individual with a disability and require accommodation in the application process. For California applicants, qualified applicants with arrest or conviction records will be considered for employment in accordance with the Los Angeles County Fair Chance Ordinance for Employers and the California Fair Chance Act. All of the material job duties described in this posting are job duties for which a criminal history may have a direct, adverse, and negative relationship potentially resulting in the withdrawal of a conditional offer of employment. It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. By applying and submitting your resume, you authorize Yoh to review and reformat your resume to meet Yoh's hiring clients' preferences. To learn more about Yoh's privacy practices, please see our Candidate Privacy Notice: **********************************

HCLTech is looking for a highly talented and self-motivated Electrical Test Engineer to join it in advancing the technological world through innovation and creativity. Job Title: Electrical Test Engineer Position Type: Fulltime Location: San Diego, CA Key Responsibilities: Audits - independent set of eyes to review various records and compare according to procedural requirements for both infusion and dispensing (e.g. TMVs) Access to SAP and fluent in looking up materials, BOMs, etc. End to End knowledge of Product Lifecycle for an EMI product from Design Controls through Design Transfer, inclusive of Sustaining Activities in Production. For example, I have a project which will be to observe current production processes and create production specs (remediation) and then a traceability matrix that ties design outputs to final testing in manufacturing. Material Masters, Inspection Plans, Final MBIs and TIs may need to be updated. Trace EDOs and remediate downstream production activities to those EDOs (e.g. update inspection plans, compare testing and user manual, evaluate final acceptance and controls) Knowledge of environmental monitoring in warehouse Familiarity with RoHS requirements and creation of Environmental Files which will include working with suppliers and procurement Exceptional English technical writing skills Nice to have: Prior knowledge of the MMS organization (knowing who to reach out to with a question) Knowledge of ESD directives, regulations and best practices Can own CAPAs and perform investigations and corrective actions, has previously owned CAPAs and can assist CAPA owners Knowledge of Global Hold process at MMS PowerBi and ability to create dynamic reports or report on metrics Qualifications & Experience Bachelor's or Master's degree in Electrical/ Electronics Engineering or a related field. 3-6 years of experience in electrical system or medical device, test systems, or Sustenance Engineering within a manufacturing or R&D environment. Experience with test automation, data acquisition systems, and calibration protocols. Pay and Benefits Pay Range Minimum: $83000 per year Pay Range Maximum: $128000 per year HCLTech is an equal opportunity employer, committed to providing equal employment opportunities to all applicants and employees regardless of race, religion, sex, color, age, national origin, pregnancy, sexual orientation, physical disability or genetic information, military or veteran status, or any other protected classification, in accordance with federal, state, and/or local law. Should any applicant have concerns about discrimination in the hiring process, they should provide a detailed report of those concerns to ****************** for investigation. Compensation and Benefits A candidate's pay within the range will depend on their work location, skills, experience, education, and other factors permitted by law. This role may also be eligible for performance-based bonuses subject to company policies. In addition, this role is eligible for the following benefits subject to company policies: medical, dental, vision, pharmacy, life, accidental death & dismemberment, and disability insurance; employee assistance program; 401(k) retirement plan; 10 days of paid time off per year (some positions are eligible for need-based leave with no designated number of leave days per year); and 10 paid holidays per year. How You'll Grow At HCLTech, we offer continuous opportunities for you to find your spark and grow with us. We want you to be happy and satisfied with your role and to really learn what type of work sparks your brilliance the best. Throughout your time with us, we offer transparent communication with senior-level employees, learning and career development programs at every level, and opportunities to experiment in different roles or even pivot industries. We believe that you should be in control of your career with unlimited opportunities to find the role that fits you best.

KGS Group is looking for an Electrical Engineer to join our Bellevue, WA or Granite Bay, CA. About Us We are KGS Group, an employee-owned, multidisciplinary engineering consulting firm serving clients throughout North America. We're different than traditional engineering firms. We believe a commitment to lasting relationships is just as critical as the expertise applied in our work. To us that means we put our clients and people first. We have the discipline to consistently deliver KGS Quality, never taking the easy way out. We always look closer and dig deeper. And no matter the project, we care enough to do it right. As an employee-owned company, we're invested in our work and our people. Working with us means you'll be part of some of the most interesting projects up and down the west coast. With the extensive, wide-ranging expertise within our company, you'll have countless opportunities to learn and grow. Many of our core clients operate in the hydropower and water management fields. We are growing our U.S. team to continue to provide our industry-leading services to these clients. As we expand our presence on the west coast , we are looking for strong candidates at all levels to join our team! The Role As an Electrical Engineer, you will be responsible for providing engineering inputs integral to both small and large-scale hydro and dam projects. You will lead and mentor teams, support management of production and coordinate delivery of engineering work products often with multi-disciplinary project team members and external stakeholders. You will not only support and help grow the broader engineering team capabilities, but your particular focus will be on continuing the development of our hydropower capabilities and working with key staff in growing the business. You'll also be involved in supporting project management duties, coordinating with internal and external clients as well as assisting with guiding and mentoring other engineers within the team. In this role you will lead teams conducting technical work for feasibility studies, engineering designs, preparation of construction drawings and specifications, and carrying out inspections for rehabilitation projects for dams and hydroelectric facilities. Your particular focus will be design delivery and mentorship, but you will also be involved in the proposal process. You will be working in a collaborative environment with a great team of engineers, technicians, scientists, and other industry-leading peers. Key Responsibilities Provide input to those managing and executing multiple projects (small to large) from the proposal stage through to completion Establish connections with other departments to support and enhance service delivery Work collaboratively with other disciplines and multidisciplinary project teams to execute project deliverables, as well as ensure that quality objectives, schedules, and budgets are met Mentor junior staff Design modifications to, or entirely new electrical, instrumentation, and controls systems related to dams, control structures, water retaining structures, switchyards and hydroelectric generating stations Conduct feasibility studies for proposed designs and assess costs and benefits for alternatives in a systematic and thorough manner. Manage and execute multiple projects from the proposal stage through to completion; Projects will include a variety of small to large projects involving water resources, flood control and hydroelectric sectors Prepare and review reports Perform calculations Conduct inspections and support project work on site as required Edit and prepare design specifications Conduct QA/QC reviews and facilitate the KGS's QA/QC process. Contribute to the development of the electrical engineering practice at KGS by assisting the electrical design leadership by documenting technical knowledge, improving internal production processes, coordinating and developing internal training content, and other tasks. Perform other duties as assigned About You To fill the role, we're looking for an applicant to bring forward a good mix of qualifications and previous experiences. Some highlights should include: Minimum of a Bachelor of Science (BS) degree in electrical engineering from a recognized university; A post-graduate degree is an asset Minimum of 7-15 years of experience in electrical engineering with demonstrated project management skills (tracking budgets and meeting schedules) Must be registered as a Professional Engineer (P.E.) in Washington, Oregon, or California, as well as eligible for registration as a professional engineer in other states via comity within three months of starting. Previous consulting experience is preferred but not required. Excellent verbal and written communication skills Candidate must be self-motivated, and able to work independently with minimal supervision Must be able to effectively assume a lead role as project engineer and communicate project and technical information with clients Demonstrated experience in site investigations, condition assessments, design and construction support are preferred Experience with station service distribution (all voltages), medium voltage equipment, fixed bus power distribution systems, Programmable Logic Controller (PLC) automation (for equipment control), generators and transformers including related monitoring systems, communication systems, system grounding, hoists and gate automation and balance of plant systems for hydroelectric stations preferred, but industrial experience will be considered Experience with the following would be considered an asset: Backup power systems (including Uninterruptible Power Supply (UPS), Direct Current systems and fuel fired backup) Lighting (including emergency and exit lighting systems) Fiber and copper structured cable systems, and associated networking equipment Distributed Control System (DCS) and PLC Automation, Human Machine Interface (HMI) and Remote Terminal Unit (RTU) integration (including any programming experience) Protection systems experience, including specifying, setting and verifying (include reference to voltages) Load flow analysis, system modelling, arc-flash, grounding, and other electrical studies (include reference to software used and any training) North American Electric Reliability Corporation (NERC)/Critical Infrastructure Protection (CIP) planning Physical or cyber security planning or design Unit outage planning Other renewable energy experience Travel to project sites is usually limited but is required depending on project/client requirements. The amount of travel time desired by our employees can usually be accommodated. Must possess a valid driver's license and the ability/willingness to undergo security clearance checks Have the drive, attitude, and commitment to being an active participant in our employee-owned culture is a must The salary range for this position is $120,000 to $155,000 annually. Please note that the salary range mentioned in this job description should serve simply as a guide. The final compensation offered may vary based on a variety of factors, including candidate's experience, skills, and location. KGS Group is committed to providing a fair, equitable, and competitive package that reflects the value an individual brings to the organization. KGS Group is an employee-owned equal opportunity company offering an excellent compensation and benefits package. KGS Group welcomes and encourages applications from people with disabilities. Upon request, KGS Group will provide reasonable accommodation for disabilities to support participation of candidates in all aspects of the recruitment process.

Job Title: Senior Electrical & I&C Engineer - Water and Wastewater MKN is seeking a Senior Electrical & Instrumentation and Controls (I&C) Engineer to support the planning, design, and implementation of electrical and control systems for water and wastewater infrastructure projects. This role is ideal for a seasoned engineer with deep expertise in power distribution and control systems design, PLC/SCADA design/integration, and process instrumentation. You'll work closely with multidisciplinary teams to deliver technically sound and innovative solutions that serve public agencies and communities throughout California. We are a team-oriented and highly motivated group with offices in Irvine, Oceanside, Arroyo Grande, San Luis Obispo, Bakersfield, Fresno, San Jose, Ventura, and Santa Clarita. MKN strongly believes in and understands the importance of balancing work and personal life. Our recent awards, from Great Place to Work and Zweig Top Firms , are a testament to this value and the support we provide to our fellow team members. Our collaborative work environment and inclusive operating philosophy allow us to maintain a positive work culture while providing excellent service to our clients. Key Responsibilities: Design of electrical power distribution system (i.e. 480VAC and below) and I&C systems design ( for water and wastewater treatment facilities, pump stations, and distribution systems. Medium-voltage design experience is a plus. Develop electrical design drawings and specifications, including single-line diagrams, load calculations, panel layouts/schedules, cable/conduit sizing, grounding system design, indoor/outdoor lighting designs, conduit/cable schedules, protective relaying and metering, UPS and power conditioning systems, lightning and surge protection systems, motors and motor controls, and heat tracing design. Perform power system studies including load flow, short circuit, protective device coordination, arc flash analysis, and harmonic studies, using ETAP or SKM. Develop and specify I&C systems pertaining to process instrumentation (flow, pressure, level, analytical, etc.) and support control logic development and system integration, and develop P&IDs, I/O list, loop wiring diagrams, telemetry design and communication/network system architecture. Produce detailed construction contract drawings, specifications, and cost estimates for bid and permit packages. Coordinate with internal engineering teams, integrators, contractors, clients, and regulatory agencies throughout the project lifecycle. Mentor junior engineers and contribute to MKN's technical standards and design practices. Qualifications: Bachelor's degree in Electrical Engineering or related discipline from an accredited university or college. California Professional Engineer (PE) license in Electrical Engineering or Control Systems (or ability to obtain within 1 year). 5+ years of relevant experience in electrical and I&C design for municipal water and wastewater infrastructure. Strong understanding of low-voltage power systems, motor control, VFDs, MCCs, emergency power systems, and electrical codes and standards (NFPA70-NEC, NFPA 820, NFPA 70E, IEEE). Proven experience with power distribution, lighting, grounding, and PLC controls systems design. Proficient in AutoCAD, Revit, and design/analysis software (ETAP, SKM, RSLogix/Studio 5000). Familiarity with I&C specifications and process instrumentation in water/wastewater environments. Excellent communication skills, a collaborative spirit, and demonstrated ability to manage schedules and budgets. Strong attention to detail, organizational and time management skills, adaptable, agile, and responsive to quick changes in direction, with strategic thinking and problem-solving abilities. Why Join MKN? Be a technical leader on meaningful public infrastructure projects that impact California communities. Join a collaborative, award-winning team committed to innovation and excellence. Enjoy work-life balance, career growth opportunities, and continued professional development. Access competitive compensation and a comprehensive benefits package. Compensation & Benefits: Compensation is based on experience and qualifications. Anticipated salary range: $110,000 - $150,000. MKN offers a competitive benefits package including health insurance, retirement plan, paid time off, and support for licensure, continuing education, and training. Submit your resume and a brief cover letter to **************************** outlining your interest and qualifications for this position. MKN does not sponsor foreign nationals for employment-based visas or permanent residence.

My client is seeking a Junior Electrical Engineer to contribute to the design and development of advanced mixed-signal electronics used in high-precision navigation systems. The ideal candidate will have hands-on experience with circuit design, analysis, and troubleshooting, and be capable of taking ownership of sub-systems from concept through verification. This role is in Concord CA and requires candidate to be ONSITE 5 days a week. Key Responsibilities: Design and analyze analog and digital circuits for precision data acquisition and control systems. Develop schematics, support PCB layout, and validate performance through lab testing. Conduct simulations and worst-case analyses to verify compliance with requirements. Collaborate with mechanical, firmware, and systems engineers to ensure seamless integration. Participate in design reviews and assist in resolving design and production issues. Support documentation, test procedures, and design verification reports. Qualifications: Bachelor's degree in Electrical Engineering. 2-5 years of experience in circuit design, testing, and product development. Proficiency with schematic and PCB design tools (Altium, or CAD, or equivalent). Solid understanding of analog/digital fundamentals, signal integrity, and power distribution. Experience using lab equipment such as oscilloscopes, spectrum analyzers, and power supplies. Strong problem-solving, communication, and teamwork skills. Preferred Skills: Familiarity with FPGA, MCU, or embedded system interfaces. Experience with SPICE, Simulink, or MATLAB for analysis and modeling. Exposure to MIL-STD or aerospace/defense hardware requirements. Knowledge in sensor systems, inertial navigation, or precision instrumentation. Salary is 85,000-125,000 based on experience. Benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, education assistance, parental leave, 16 PTO days, and 10 Company-paid holidays.

Domain: Embedded Hardware, PCB Design, FPGA, High-Speed Systems, EMI/EMC Experience: 10+ years San Jose, CA Based - Lead end-to-end hardware development for FPGA/SoC-based systems, including architecture, schematic design, PCB review, board bring-up, debugging, compliance testing, and cross-functional collaboration. Key Responsibilities: Hardware Design: Architecture, schematic capture, PCB review, documentation System Integration: High-speed board bring-up, signal/power integrity troubleshooting Testing & Compliance: DVT/PVT, EMI/EMC design, certification coordination Vendor Interface: PCB fabrication, assembly, procurement Sustenance: RMA debugging, redesign for compliance Collaboration: Work with firmware, mechanical, and test teams Technical Skills: Tools: Allegro, Altium, Interfaces: USB, BLE, SPI, I2C, Ethernet, CAN, PCIe Lab Expertise: Oscilloscopes, Logic Analyzers, Signal Generators Qualifications: Bachelor's in Electronics/Communication (or related), strong debugging and documentation skills

Must have skills High-speed digital board design 25G+ SerDes Microprocessor-based reference design High-speed optics (10-25G+) FPGA / PCIe / Retimers / PHY components Hardware debugging (oscilloscope, analyzer, VNA) ======= High-Speed Hardware Design Engineer We are seeking a skilled High-Speed Hardware Design Engineer to lead the development of cutting-edge digital boards and systems. The ideal candidate will have hands-on experience with high-speed interfaces, optics, and advanced debugging tools. Key Responsibilities: Design and develop high-speed digital boards from concept to production. Work with 25G+ SerDes, high-speed optics (10-25G+), and microprocessor-based reference designs. Integrate and validate high-speed components including FPGAs, PHYs, Retimers, PCIe switches, and POLs. Perform hardware bring-up, signal integrity validation, and root-cause analysis using oscilloscopes, VNAs, and logic analyzers. Collaborate with cross-functional teams to ensure robust system performance. Develop and maintain automation scripts using Perl, Python, or similar languages. Preferred Qualifications: Proven experience in high-speed board design and debugging. Strong understanding of networking hardware and terminology. Proficiency in lab instrumentation and test setup.

Domain: Embedded Hardware, PCB Design, FPGA, High-Speed Systems, EMI/EMC Experience: 10+ years San Jose, CA Based - Lead end-to-end hardware development for FPGA/SoC-based systems, including architecture, schematic design, PCB review, board bring-up, debugging, compliance testing, and cross-functional collaboration. Key Responsibilities: Hardware Design: Architecture, schematic capture, PCB review, documentation System Integration: High-speed board bring-up, signal/power integrity troubleshooting Testing & Compliance: DVT/PVT, EMI/EMC design, certification coordination Vendor Interface: PCB fabrication, assembly, procurement Sustenance: RMA debugging, redesign for compliance Collaboration: Work with firmware, mechanical, and test teams Technical Skills: Tools: Allegro, Altium, Interfaces: USB, BLE, SPI, I2C, Ethernet, CAN, PCIe Lab Expertise: Oscilloscopes, Logic Analyzers, Signal Generators Qualifications: Bachelor's in Electronics/Communication (or related), strong debugging and documentation skills

Job Title: Electrical Design Engineer 4 Work Schedule: On-site Rate: $71, Based on experience. Responsibilities: Designs electrical parts, modules and subsystems to support the design of whole systems. Responsible for the complete design process, including requirements specification, feasibility studies, cost and scheduling, conducting various hand-on testing and analysis, such as circuit, timing, thermal/cooling, electrical loads; conceptual and detailed design using design tools (i.e. OrCAD, PSpice, etc...), detailed drawings, design review presentations, procurement of prototype parts, system integration, prototype testing, and handoff to manufacturing. These tasks will require working with other engineering groups such as ME, OE, SW, systems and manufacturing engineers to ensure flawless integration and test at the subsystem and system level. Develops the required supporting documentation, such as assembly and test procedures, and service manuals. Works closely with and manages suppliers to ensure all design requirements are specified and achieved. Addresses and resolves product issues thru the product phases. Has strong leadership, communication and problem solving skills. Minimum B.S. in electrical engineering 5 years experience Skills: Category Name Required Importance Experience Area of Expertise Electromechanical No 2 Area of Expertise Schematic Capture No 1 Areas of Expertise Circuit Design No 1 Areas of Expertise Electrical Troubleshooting No 1 Technical Skills Circuit Failure Mode Analysis No 1 Technical Skills Electrical Testing No 1 Technical Skills Schematic Development No 1 About Maxonic: Since 2002 Maxonic has been at the forefront of connecting candidate strengths to client challenges. Our award winning, dedicated team of recruiting professionals are specialized by technology, are great listeners, and will seek to find a position that meets the long-term career needs of our candidates. We take pride in the over 10,000 candidates that we have placed, and the repeat business that we earn from our satisfied clients. Interested in Applying? Please apply with your most current resume. Feel free to contact Lavanya Dommeti (********************* / *************** for more details.

We are looking for a junior, motivated and talented problem solver. The ideal candidate will be responsible for testing and assembling electrical and mechanical components into devices. They will also help design and manufacture our product, organize the lab and work with suppliers as needed. They should be able to make quality assurance checks in order to keep the product standard high. Responsibilities Evaluate electrical products and systems by designing testing methods Organize lab Test finished products and system capabilities Keep necessary equipment operational Contribute to team efforts by accomplishing related results Qualifications Bachelor's degree in Electrical Engineering or related field Have knowledge of sensors, mechanical parts and electronic boards Can solder electrical components on PCB Strong problem solving, technical, math and science skills Strong written and verbal communication

JSG is hiring a Hardware Engineer for our client in Irvine, CA. Must be a US Citizen Pay range: depending on experience $40-$45+ 3+ years experience with electronic circuits and systems design, integration and testing. Knowledge of motor drivews and controls is desirable. Experience with the use of standard lab test equipment. Familiar with one or more of the following: OrCAD, MATLAB, LabVIEW or VHDL. Defense or aerospace industry experience desired. PCB layout experience desired. The Hardware Engineer Temp will have a minimum of 3+ years of electronic circuits and systems design, integration and testing experience. Knowledge of RF systems or motor drives and controls is desirable. Experience with the use of test equipment, such as oscilloscope, spectrum analyzer, network analyzer, DMMs, and signal generators. Knowledge of project engineering methods and troubleshooting techniques for electronic circuitry. Knowledge of test report and procedure generation. Familiar with one or more of the following: OrCAD, MATLAB, LabView, and/or VHDL. Digital Signal Processing (DSP RF Circuit Design Analog Circuit Design Digital Electronics Design FPGA Design Algorithm Development (Pattern Recognition and Object Tracking) LabView Automated Test Stand Design Requires strong oral/written communication skills. Excellent organizational skills. Advanced troubleshooting skills required. Will be required to work independently and with interdepartmental teams. Will be required to assist in the design and development of electronic systems. Will be required to write or assist in the development of test plans and test procedures. Will be required to assist in the automation of relevant test procedures and/or design and development of test fixtures. Will be required to assist in lab and field tests of electronic systems. Familiarity with AS9100 is desirable. US Citizenship only. JSG offers medical, dental, vision, life insurance options, short-term disability, 401(k), weekly pay, and more. Johnson Service Group (JSG) is an Equal Opportunity Employer. JSG provides equal employment opportunities to all applicants and employees without regard to race, color, religion, sex, age, sexual orientation, gender identity, national origin, disability, marital status, protected veteran status, or any other characteristic protected by law.

Happiest Minds, the Mindful IT Company, applies agile methodologies to enable digital transformation for enterprises and technology providers by delivering seamless customer experience, business efficiency and actionable insights. We leverage a spectrum of disruptive technologies such as: Big Data Analytics, AI & Cognitive Computing, Internet of Things, Cloud, Security, SDN-NFV, RPA, Blockchain, etc. Positioned as Born Digital . Born Agile , our capabilities spans across product engineering, digital business solutions, infrastructure management and security services. We deliver these services across industry sectors such as retail, consumer packaged goods, edutech, e-commerce, banking, insurance, hi-tech, engineering R&D, manufacturing, automotive and travel/transportation/hospitality. Headquartered in Bangalore, India; Happiest Minds has operations in USA, UK, The Netherlands, Australia and Middle East. Job Description: 10 to 15 years of relevant experience as a Hardware design and test engineer. Bachelor s degree in electrical engineering, electronics engineering, or equivalent. Excellent problem-solving/ debugging skills and attention to detail. Excellent written and oral communication. Active involvement in all phases of an embedded product development (Requirement Analysis, Design, Implementation, Prototyping, Documentation and Testing) Should be an expert in selecting components meeting cost, functionality, performance, regulatory and non-functional requirements such as long-term availability, size etc. Independently develop micro-controller and micro-processor-based designs with peripherals such as ADCs, DACs, storage, Ethernet PHYs etc Experience in/Knowledge of interfaces such as DDR3/4/5, PCIe Gen4 or higher, SATA, USB3.0/4.0, Ethernet, Display interfaces, Audio interfaces, SPI, I2C etc Proficient in developing Schematics using Cadence OrCAD tool Should be able to prepare the PCB layout guidelines and review the PCB layout using Cadence Allegro tool Experience in designing multi-layer PCBs considering EMI/EMC and signal integrity aspects Perform board bring-up tests, functional tests, and DVT Experience with hardware testing and debugging tools (e.g., Power Supply, Multimeter, Oscilloscopes, Logic analysers etc). Good to have: Conduct pre-compliance screening tests for EMI/EMC/Safety etc at third party labs Perform reliability analysis such DFMEA, MTBF prediction, HALT testing, ESS testing etc Experience in high-speed designs (interfaces such as PCIe Gen 5/6, USB4.x, DDR5, 10G/100G Ethernet etc) Signal Integrity testing, compliance testing

Requirements Patent preparation and prosecution experience, either in-house or as outside counsel, specifically in the electrical arts (e.g., circuit design, medical devices, and consumer devices) A BS degree in electrical engineering is preferred, although candidates with other degrees will be considered Legal, industry, and/or academic experience in electrical engineering, particularly with machine learning, cloud computing/networking, wireless communications, cryptography, information security, robotics or distributed ledger is desirable Active bar admission in state where practicing Registered to practice before the USPTO Strong time management and organizational skills, including demonstrated ability to take ownership for, and efficiently manage, a large docket including meeting internal and external deadlines Familiarity with operations of large organizations with established patent programs, including international organizations Strong work ethic and commitment to being responsive to client needs Excellent writing, communication and interpersonal skills Ability to collaborate and work effectively with a variety of internal and external stakeholders Demonstrated ability working independently Summary Vanguard Intellectual Partners (Vanguard-IP) specializes in the placement of IP/Patent professionals nationwide. Our sole focus on intellectual property enables us to more deeply understand our clients' technical needs, and our candidates' individual talents and career interests. Our broad network of long-term client relationships gives us a competitive edge. Our recruiters all have 10+ years of IP recruiting experience, and an exceptional record of success. We have superior knowledge of the IP job market, and offer trusted career advice for our candidates. We also have the resources and high-level contacts to get your resume noticed by the people who matter. We look forward to speaking with you, and learning more about what you are seeking in your next opportunity. Confidentiality At Vanguard-IP, we respect the confidentiality of every candidate who contacts us. Furthermore, we will always obtain expressed authorization before submitting your resume to any of our clients. Should you have an interest in exploring opportunities in another location, we have hundreds of openings in other markets. Please apply now and our team would be happy to review your information for this or other openings in your location of interest. #J-18808-Ljbffr

Monolithic Power Systems, Inc. (MPS) is one of the fastest growing companies in the Semiconductor industry. We are worldwide technical leaders in Integrated Power Semiconductors and Systems Power delivery architectures. At MPS, we cultivate creativity, are passionate about sustainability, and are committed to providing leading-edge products and innovation to our customers. Our portfolio of technology helps power our world ---come join our team and see how YOU can make a difference. : Monolithic Power Systems, Inc. (MPS) is one of the fastest growing companies in the Semiconductor industry. We are worldwide technical leaders in Integrated Power Semiconductors and Systems Power delivery architectures. At MPS, we cultivate creativity, are passionate about sustainability, and are committed to providing leading-edge products and innovation to our customers. Our portfolio of technology helps power our world --- come join our team and see how YOU can make a difference. Job Description We're looking for a passionate Staff Analog Design Engineer who is interested in designing analog and mixed-signal ICs for Power Management Products utilizing leading edge sub-micron BiCMOS /DMOS technologies. Products may include switching regulators, hot-swap eFuse, haft-bridge driver and power management ICs for fast growing markets such as networking, server, telecom, notebook/server core voltage, graphic card core regulator, point-of-load (PoL) and power modules. Responsibilities Analog Design Lead and architects to design IP blocks. Design analog circuits including but not limited to: LDO's, Charge Pumps, Bandgaps, Amplifiers, Drivers, DAC's, Current Sensing Techniques and other common precision circuits. Actively participates in the entire product development cycle, from product definition to product introduction (Trade-offs among Risk Assessment, Cost Analysis and Performance Evaluation) Design-For-Test strategic planning (Test Plan Development) to evaluate blocks' performance Conduct design reviews and manage tape out schedule Provide guidance to layout engineers on critical analog implementation aspects, monitors progress of layouts, and closes the loop with post layout and simulation. Work with cross functional team to evaluate intended product behavior during pre Tape-out and post Tape-out. Design Blocks Verification (PVT, Monte Carlo Analysis), Top Level AMS Simulations and Post layout extraction and simulations Supervise and train juniors for successful design execution Preferred Qualification Requires BSEE/MSEE or Equivalent in Electrical Engineering 5+ years' experience within analog design Comprehensive simulation skills in Cadence Environment Highly motivated individual and collaborative team player Strong analytical/problem-solving skills and Hands on experiments Solid background of BiCMOS & High Voltage BCD Process Technology, reliability, ESD Latch Up Strong knowledge of transistor level design and low power design techniques Solid understanding of control loop topologies (Constant On Time, Peak/Valley Current Mode, Voltage Mode control loops) Location: San Jose, CA MPS offers a comprehensive benefits package. We provide health care coverage, dental and vision, 401(K), Employee Stock Purchase Program (ESPP), up to 11 company paid holidays, and 15- 20 days of paid time off depending on your tenure, generous discretionary company bonuses, and life and disability protection. Employees in sales positions may be eligible for our sales incentive bonuses. Employees in certain positions may be eligible for stock compensation. For more information on MPS' benefits please view our company website at ************************ Pay is based on market location and may vary based on factors including experience, skills, education and other job-related reasons. The base salary range for this position in California is $157,000 - $189,000. Monolithic Power Systems, Inc. (MPS) is an Equal Opportunity Employer and embraces diversity in our employee population. It is the policy of MPS to provide equal opportunity to all qualified applicants and employees without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, protected veteran status or special disabled veteran, marital status, pregnancy, genetic information, or any other legally protected status.

Job Level: Mid Level Home District/Group: MEC Industrial District Department: Field Operations Market: Industrial Employment Type: Full Time As an Engineer II, you will play a significant part in the success of planning, organizing and implementing project engineering & project controls tasks. Excellent communication, attention to detail and an ability to work well in a team environment are considered critical to this position. We are looking for individuals with motivation and eagerness to expand their skillset in infrastructure construction. District Overview Mass. Electric Construction Co. (MEC) is a subsidiary of the Kiewit Corporation. Since our founding in 1928 in Boston, Massachusetts, Mass. Electric Construction's philosophy has been to pursue electrical projects that require a higher level of technical and logistical skill. MEC has organized strategically to actively participate and capture projects in the growing industrial market. We intend to effectively compete and win in traditional and alternate delivery procurements and position ourselves for a sustainable future. We self-perform the majority of our work and are looking for people committed to the industrial construction industry. Location One of the many things that makes Kiewit - Mass Electric's culture unique is that we go where the work is, which exposes your career to abundant opportunities. We relocate our teams based on the work that is available, combined with the development plans, skill sets and career goals of each team member. This means your Kiewit - Mass Electric adventure is custom-designed to meet our shared needs. We have immediate needs in the following locations: * Irvine, CA * San Diego, CA * Chandler, AZ * Gilbert, AZ * Phoenix, AZ * Maryville, MO * Caldwell, KS * Hutchinson, KS * El Portal, CA Responsibilities Field Engineering: * Assist in interpretation of drawings and specifications for field crews and craft supervision * Perform quantity calculations by taking measurements and determining percentage of completed/installed materials and work * Assist in the preparation of work plans and work packages * Assist in field surveying and work layout support including elevation, control points, and compilation of as-built data * Assist in compiling, processing, and confirming daily labor timesheets * Assist in the preparation of Job Hazard Analysis (JHA's) * Participate in jobsite safety reviews, toolbox meetings, mass safety meetings, and safety training * Order and schedule material deliveries * Plan, schedule, and coordinate work groups on the jobsite * Supervise field operations Office Engineering: * Perform material takeoffs from drawings, specifications and other contract documents * Perform basic engineering calculations and technical drafting to support field operations * Assist Engineers to gather and prepare data for submittal or transmittal to the customer, vendors, subcontractors, governmental agencies, and internal use * Assist in preparation of purchase orders and subcontracts, performing minor solicitations and purchasing as requested * Assist in schedule maintenance and performing updates as directed by others * Assist in the maintenance of basic project recordkeeping and correspondence functions including daily reports, photographs, requests for information (RFIs), and memorandums * Assist with entering data into the job cost system and participate in reviewing cost reports with jobsite management * Assist in generating change orders and as-built data to be reviewed by the Project Manager * Provide field support and supervise subcontractor operations Estimating: * Assist in reviewing and analyzing historical data relative to the project, incorporating various productions and costs appropriate in preparation of a bid * Complete a plan and specification review for an assigned project, assessing the risk areas and bringing them to the attention of the Senior Estimator * Complete material and quantity takeoffs according to bid documents #LI-JT1 Qualifications * Ability to travel and relocate as needed * 3+ years' construction field experience * Work experience in engineering and leading engineers * Undergraduate degree in civil engineering, construction management, or related * Ability to read, analyze and identify discrepancies on engineering plans, specifications, and contract documents * Ability to freely access all points of a construction site in wide-ranging climates and environment * Highly motivated, with a demonstrated passion for excellence and taking initiative * Strong work ethic, willing to do what it takes to get the job done right the first time * Demonstrated commitment to ethics and integrity * Passion for safety, with the ability to help us ensure that nobody gets hurt * Strong interpersonal, written, and verbal communication skills * Team player with the ability to work independently to meet deadlines, goals, and objectives * Strong organization, time management, and attention to detail Other Requirements: * Regular, reliable attendance * Work productively and meet deadlines timely * Communicate and interact effectively and professionally with supervisors, employees, and others individually or in a team environment * Perform work safely and effectively. Understand and follow oral and written instructions, including warning signs, equipment use, and other policies. * Work during normal operating hours to organize and complete work within given deadlines. Work overtime and weekends as required. * May work at various different locations and conditions may vary Base Compensation: $95,000/yr - $105,000/yr (Actual compensation is subject to variation due to such factors as education, experience, skillset, and/or location) We offer our fulltime staff employees a comprehensive benefits package that's among the best in our industry, including top-tier medical, dental and vision plans covering eligible employees and dependents, voluntary wellness and employee assistance programs, life insurance, disability, retirement plans with matching, and generous paid time off. Equal Opportunity Employer, including disability and protected veteran status.

L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers' mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. L3Harris Technologies is the Trusted Disruptor in the defense industry. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. Job Title: Facilities Electrical Engineer Job Code: 31313 Job Location: Canoga Park, CA Job Schedule: 9/80: Employees work 9 out of every 14 days - totaling 80 hours worked - and have every other Friday off Job Description: The Aerojet Rocketdyne Segment of L3Harris is currently seeking an experienced Facilities Electrical Engineer for our Space Propulsion and Power Systems facility in Canoga Park, CA. This position will provide Electrical Engineering to support Construction, Equipment Installation Projects, as well as Equipment & Infrastructure Maintenance Technical Support; and manage Facilities Capital Projects for Electrical and/or Manufacturing & Process equipment installations. These include Engineering and Design for the installation and modifications of Manufacturing, Process and Lab equipment, Office Areas, HVAC & Control systems, Electrical distribution, Emergency Power and Green Energy systems, Alarms, Public Address. Essential Functions: + Lead and support Facilities Projects in the development of Electrical Engineering designs, calculations, specifications, and cost estimates for Equipment Acquisitions, Facility renovations, and Construction projects. + Interface with A&E firms and Construction Contractors. + Review and approve construction documents and contractor submittals. + Maintain as-built drawings and records. + Interpret and apply codes. + Support Maintenance staff in trouble shooting and technical issues as required and make recommendations for planned system refurbishment or replacement. + Manage facilities projects: including internal customer interface, external contractor interface, leading Project Teams, developing project scope, schedule, cost, generating and reviewing/approving work authorizations and invoices for payment. Qualifications: + Bachelor's degree and minimum of 4 years of prior relevant experience or Graduate Degree and a minimum of 2 years of relevant experience. In lieu of a degree, a minimum of 8 years of prior related electrical engineering experience. Preferred Additional Skills: + High level of Safety and Customer focus. + Strong skills in teamwork and the ability to communicate effectively with peers, management, customer personnel, outside agencies, Contractors and others in a dynamic changing environment. + Ability to support several projects and competing priorities simultaneously. + Knowledgeable of NEC and other applicable Electrical Building codes + Knowledgeable of applicable industry standards (UL, Title 24, Lighting Standards, etc) + Ability to work in a combination of indoor and outdoor environments (hot, cold, wet, humid conditions) with a varied amount of walking, standing, sitting, climbing (i.e. ladders, stairs, scaffolding, ramps), as well as a standard office setting and use standard office equipment, including a computer. + Proficient in AutoCad, Microsoft Word, Excel, Power Point, & MS Project + California State Licensed Professional Engineer - Electrical Engineering + Arc-flash power systems studies highly desirable In compliance with pay transparency requirements, the salary range for this role in Colorado State, Hawaii, Illinois, Maryland, Minnesota, Vermont and New York State is $68,000- $126,000. For California, Seattle, Washington D.C., Maryland Greater Washington D.C. area, the city of Denver, Washington State and New York City, the salary range for this role is $77,500- $144,500. This is not a guarantee of compensation or salary, as final offer amount may vary based on factors including but not limited to experience and geographic location. L3Harris also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, education assistance, parental leave, paid time off, and company-paid holidays. The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements. L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English (******************************************************************************************** or Spanish (******************************************************************************************** . For information regarding your Right To Work, please click here for English (****************************************************************************************** or Spanish (******************************************************************************************** .

Novate is an Industrial Technology Services firm with 20+ years of providing professional engineering design, turnkey project implementation, and support services for the technology that runs industrial production facilities. Our clients are large scale industrial facilities that rely on us for our expertise and high-quality implementation of process control systems, information software, instrumentation, industrial networks, SCADA/BMS, measurement, inspection, motion, and state-of-the-art Industry 4.0 technologies. This position works under limited supervision, focusing on designing, creating, and updating instrumentation & control diagrams, electrical ladder diagrams, panel elevation views, process and instrumentation diagrams, network diagrams and electrical one-line diagrams. Engineering drawings are completed with a regard to detail and demonstrating a solid understanding of applicable codes and standards. This position supports clients throughout California's Central Valley. As an experienced professional, you will work with limited direction from your manager. You will ascertain project scope and expectations from account managers, your manager, or other engineers. Using your skills as an engineer, you will develop designs that meet project scope requirements, selecting industrial components, automation systems, instrumentation and network equipment incorporating all into a cohesive and clear engineering package. The engineering packages will clearly communicate design intent and support fabrication, installation, qualification, and acceptance testing. As a key Novate employee, professionalism will extend to properly documented performance within the Novate process workflow (PSA tools, Novate cloud space and various other tools). You will communicate via email, phone, and through our PSA tools with other Novate team members, clients and vendors with professionalism and respect. Your internal drive for improvement, and native curiosity will help you pursue professional growth, certification, licensure, and advancement within the Novate engineering team from Engineer I to II, III and then to Sr. Engineer I. You will work to lead Associate Engineers within the same field as you continue to build leadership and management experience. To be successful in this role, the ideal individual must be: · An effective communicator. · A Self-starter and highly motivated. · Well organized with exceptional time management skills. · Critical thinking Responsibilities: · Oversee and perform Instrumentation & Control Design on assigned projects. · Complete electrical design for · Provides engineering support to business development team for bids and proposals. · Provides technical direction as needed to other Novate team members. · Serves as a point of contact to clients and vendors as needed. · Generates documents consistent with all company policies and procedures to deliver superior work product. · Comply with corporate policies and directives. · Other duties as assigned. Job requirements Requirements · Experience as an Electrical Engineer in the industrial automation and controls industry. · Solid understanding of common automation components, including: PLCs PACs VFDs Servo Systems Process Instruments Sensors · Thrives under pressure and excels in a fast-paced work environment with a variety of projects. · Ability to create accurate professional drawings from concept sketches and shop drawings. · Proficient using AutoCAD Suite and AutoCAD Electrical. · Proficient with Microsoft Office Teams and SharePoint. · Excellent oral and written communication skills. . Ability to host/facilitate design reviews with client and team members with clear understanding of the design package. · Solid understanding of I&C codes and standards, including the NEC, NFPA 70E, 79, and UL 508/A. · Ability to work with diverse personalities. · Be team oriented. · Excellent organization and time management skills. · Ability to travel, when necessary for field visits/client meetings, FAT/SATs within the US (typically about 15%, mostly California). · Ability to type 35 + WPM. Education: · Bachelor of Science degree in electrical engineering from an ABET accredited program. (Preferred) · Associate Degree in an Engineering program (minimum) License/Certifications: · Valid driver's license (required) · Registered Professional Engineer (PE) (Novate will support application, training and reciprocity) · ISA Certified Automation Professional (CAP) Competencies: · Communication · Tenacity · Critical Thinking · Technical Mastery Physical Demands: The ability to lift up to 50 pounds with frequent standing, walking, bending, kneeling, stooping, crouching and crawling into confined spaces. Travel Requirement: Ability to travel frequently locally and out of state when necessary. Travel up to 15%. Work Authorization/Security Clearance: Ability to pass US Federal, State and Local security level background check. (US, DHS/FBI/DoD) required. NO RECRUITERS OR PHONE CALLS PLEASE All done! Your application has been successfully submitted! Other jobs

Job Details Experienced Escalon, CA Full Time $110000.00 - $125000.00 Salary/year Day EngineeringDescription Senior Electrical Engineer Hogan Mfg Inc. Escalon, CA $110,000 - $125,000 - Full-time Proficiencies SolidWorks AutoCAD Altium / PCB Design MCU programming Motor Drive Systems Location ESCALON, California Job Type Full-time, Exempt Summary Hogan Mfg. is seeking a motivated and skilled Electronic Engineer to lead the advancement of our electronic product designs, systems, and components. In this dynamic role, you will play a central part in developing electronic control and drive systems-from concept and design through to final production. You'll collaborate closely with cross-functional teams, including mechanical and manufacturing engineers, to deliver cohesive and innovative electromechanical solutions. The ideal candidate will have a strong background in electronic circuit design, schematic and PCB layout, and proficiency in CAD tools such as SolidWorks, AutoCAD, or similar. This is an exciting opportunity to join a team that values fresh ideas, innovation, and continuous improvement. What You'll Do • Design electronic circuits and systems to enable intelligent, safe control of our manufactured products. • Utilize tools such as ALTIUM for schematic/PCB design, SolidWorks (Mechanical and Electrical), AutoCAD for legacy documents, SPICE simulation, MPLABX for microcontroller solutions, and other software tools to develop and integrate electronic systems into our products. • Model, demonstrate, and test prototypes to validate design functionality and performance. • Evaluate electronic components for suitability, availability, and cost-effectiveness, and recommend alternatives as needed to ensure manufacturability. • Establish and document testing and maintenance procedures for electronic systems and components. • Design and build test equipment to verify the functionality and compliance of electronic products and components. What You'll Bring • Degree in Electrical Engineering, or equivalent professional experience. • Minimum of 5 years of industry experience in electronic design. • Proficiency with ALTIUM Designer and SolidWorks is highly desirable. • Hands-on experience with electronic test equipment, including digital storage oscilloscopes (DSO) and digital multimeters (DMM). • Strong understanding of communication protocols such as CAN, SPI, I2C, and related interfaces. • Proficiency in motor drive systems is a core requirement. • Experience designing electrical hardware and software, with a strong focus on operator safety and product reliability. • Thorough knowledge of production equipment design considerations, including usability, serviceability, environmental protection, and durability. • Proven ability to manage competing priorities and effectively meet tight deadlines in a fast-paced environment.