Electrical engineer internship jobs in Victoria, TX - 1,893 jobs

Country: United States of America Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: The ability to obtain and maintain a U.S. government issued security clearance is required. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance Security Clearance: DoD Clearance: Secret At Raytheon, the foundation of everything we do is rooted in our values and a higher calling - to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today's mission and stay ahead of tomorrow's threat. Our team solves tough, meaningful problems that create a safer, more secure world. The Radar Analog and Power Department is seeking electrical engineers with knowledge of analog electronics, power electronics, power systems, and/or control systems. The ideal candidate possesses a strong combination of design experience, electronics knowledge, and hands-on laboratory skills. The department is responsible for design engineering including the following areas: Power System Design - Power System Noise, System Simulation and Modeling, Solid State Transmitters, Tube Transmitters, High Voltage Design, Power Sources, Generators Power Conversion - AC/DC, DC/DC and DC/AC, Linear and Switching Supplies, Power Factor Correction (PFC), Zero Voltage Switching (ZVS), Resonant Circuits, Synchronization, Noise Controls Power Distribution - Ground, Air, and Shipboard, Power Generation, Line Voltage, High Current, Low Voltage, Micro-Power, DC, AC, Multi-Phase Power Control, Fault Reporting, Isolation, Protection Circuits, Redundant Systems Power Sub-System Design - Filters, Harmonic Control, EMI, Circuit Simulation, Magnetics, Protective Relay Systems, Short Circuit and Stress Analyses Control Systems - Servo Control Systems, Motor/Power/Process Control, Digital Feedback Systems, Command Generation, Inertial Stabilization, Navigation Algorithms This position is an onsite role. What you will do Work closely with a team of engineers to develop proven designs based on system performance and operational specifications. Design, analyze, simulate, test, and document power conversion (and related analog) circuitry. Work to further our department's mastery of digital power conversion concepts and help develop related best practices. Resolve production issues related to existing product designs Perform design work within the bounds of a given schedule. Present reviews of technical data to program leadership, technical staff, and customer community. Manage related risk discussions. Lead small teams to success with schedule, budget, and technical execution Engage in personal technical growth and facilitate technical growth in peers and junior engineers. Help to understand what opportunities are needed to mature the organization on the technical front. Travel to Tewksbury, MA; Marlborough, MA; Andover, MA; Woburn, MA; and/or Pelham, NH may be required depending on the assignment. Qualifications you must have Bachelor's or Master's degree in Electrical Engineering or related Science, Technology, Engineering, or Mathematics (STEM) major. Minimum 8+ years of experience in power system design, power conversion, power distribution, power sub-system design and/or control systems Experience in modeling and simulation using PSPICE, MATLAB/Simulink, or similar computer-based tools. Qualifications we prefer Advanced degree in Electrical Engineering Hardware development experience in the Department of Defense (DoD) environment Demonstrated ability to lead/manage a technical team Experience generating technical documentation and reports Knowledge of test and production methods for electronics/power system components Experience interfacing with procurement and manufacturing as well as external suppliers to ensure proper implementation of product designs Experience interfacing with DoD customer community Existing security clearance Excellent written and verbal communication What We Offer Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation. Relocation Eligibility: This position is eligible for relocation Learn More & Apply Now! Please consider the following role type definition as you apply for this role. Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products. Optional - Clearance Information: This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here: ************************************************ Location: Massachusetts locations As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. The salary range for this role is 101,000 USD - 203,000 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate's work experience, location, education/training, and key skills.Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance.This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms

L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers' mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. L3Harris Technologies is the Trusted Disruptor in the defense industry. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. Job Title: Associate, Electrical Engineering Job Location: Waco, Texas Job Description: The exact role will depend on the skillset of the candidate and the needs of the projects, but below are roles that are typically needed: ·Contribute directly to projects that integrate new systems and technologies onto existing aircraft platforms ·Identify areas for continuous improvement in current work processes ·Develop or provide updates to aircraft electrical drawings, including wiring diagrams and cable assembly drawings ·Select components and equipment based on analysis of requirements and specifications ·Perform or provide updates to aircraft electrical analyses, such as Electrical Load Analysis (power budgets) ·Provide liaison support to electrical manufacturing and electrical installation teams ·Perform Electromagnetic Engineering analyses and modeling, including antenna cosite, lightning, and HERF/HERP/HERO ·Support aircraft-level testing for electromagnetic compatibility (EMC), P-Static, EMRADHAZ, and TEMPEST ·Develop or update test procedures and test reports Qualifications: To be eligible, applicants must be pursuing a Bachelor's Degree in Electrical Engineering, Computer Engineering, Electrical & Computer Engineering, or related field or have completed their Bachelor's degree within the last 12 months, regardless of age. Preferred Skills: ·Knowledge and/or experience with: oElectrical CAD tools, such as Visual Engineer, AutoCAD Electrical or Mentor Graphics Capital Harness oAntenna Modeling tools, such as Altair FEKO, or HFSS oPower, Analog, Antennas, Controls, RF, Communication Systems oAerospace industry, military specifications and standards oSystems Engineering concepts ·Excellent communication, technical writing and presentation skills L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English or Spanish. For information regarding your Right To Work, please click here for English or Spanish.

**Role Number:** 200*********** We are seeking talented Analog Mixed-Signal designers to join our high-speed SerDes team! Our team specializes in building next generation high-performance wireline transceivers delivering intellectual-property (IP) for Apple's world-leading system-on-chip (SOC). In this role, you will actively work with cross-functional Analog Mixed-Signal design teams to create and execute on state-of-the-art IPs key to Apple's products. You will be challenged to make the best-in-class designs to surprise and delight Apple customers. With redefining the user experience in focus, you will get an opportunity to work on designs which makes the best systems. This enables you to learn end-to-end system while exceeding the highest expectations of quality, innovation and efficiency. If you have strong fundamentals and a track record of tackling technical challenges, you are passionate about learning new skills and improving the value of your work, and you like to be tuned to the bigger-picture while diving deeply into the details to innovate and tackle problems- we invite you to join and grow with our team! **Description** You will work on the development of high-performance and high-speed AMS circuits used in SerDes PHY, including evaluation of different circuit topologies for specific product requirements (e.g., Rx, CDR, Tx, bias generator, high-speed clock generation and low-jitter distribution, high-speed analog signal chain, mixed-signal calibration and algorithms) with best in class power, performance, and area (PPA). You will work with cross-functional teams (e.g., architecture, SIPI, packaging, board design, DFT, ESD) to create block-level specifications and execute on transistor-level implementation and behavioral modeling. You will drive mask design to implement layout view of designs. You will closely work with SOC teams to deliver IP views and make sure they meet the quality standards. While developing these complex IPs, on regular basis you will interact with your peers/management to communicate progress and discuss new ideas making it a lively and interactive work environment. **Minimum Qualifications** + Minimum requirement of a bachelors degree. **Preferred Qualifications** + Deep understanding of analog mixed-signal design with experience in high-speed serial links. + Understanding and experience of designing analog mixed signal circuit blocks including Bandgap, biasing circuits, LDO regulators, amplifiers, comparators, switched-cap circuits, ADCs, DACs, Oscillators, Filters + Understanding of analog mixed-signal concepts like mismatch mitigation, linearity, stability, low-power and low-noise techniques + Good grasp and understanding of digitally assisted analog design concepts (e.g. background calibrations, LMS based adaptive loops) + Experience with high-speed digital circuits (e.g., serializer, deserializer, counters, dividers, etc.) with solid understanding of digital design concepts + Knowledge of Tx/Rx equalization techniques and circuits (e.g. CTLE, DFE, de-emphasis) for 64+ Gbps NRZ and PAM applications + Knowledge of CDR architectures and implementations + Knowledge of lab equipment and testing + Experience in Analog Mixed Signal circuit modeling and performance evaluation (e.g. SystemVerilog, Matlab, Python, VerilogAMS) + Hands-on experience in advanced CMOS technologies, design with FinFet technology + Hands-on experience with AMS IC development from definition to high-volume production including layout supervision, bench evaluation, correlation, and characterization + Concepts of timing closure and related industry tools (e.g., Nanotime, Primetime) + Experience in lab testing of high-speed serial I/O, debug and data analysis techniques + Knowledge of common high-speed SerDes protocols (e.g., PCIe, USB, DP, MPHY) + Skills in scripting and automation to enhance efficiency are highly desirable Apple is an equal opportunity employer that is committed to inclusion and diversity. We seek to promote equal opportunity for all applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, Veteran status, or other legally protected characteristics. Learn more about your EEO rights as an applicant (*********************************************************************************************** .

Corporate Electrical Engineer At The Intersect Group, we connect engineering professionals with organizations that are shaping the future of industrial manufacturing and infrastructure. Our client is a leading producer in the building materials industry, known for its commitment to operational excellence, safety, and innovation. With a diverse portfolio spanning cement, wallboard, and paper production, they offer a collaborative environment where engineers can lead impactful projects and drive technical advancement. Role Summary We are seeking a Corporate Electrical Engineer to lead the design, execution, and oversight of electrical engineering projects across multiple business units. Reporting directly to the VP of Engineering and Technology, this role is responsible for developing project scopes, managing contractors, and ensuring compliance with safety and performance standards. You will serve as a technical expert and project manager, supporting capital planning, commissioning, and operational improvements. The ideal candidate brings deep experience in heavy industrial environments, strong leadership capabilities, and a hands-on approach to electrical design and execution. Key Responsibilities Define project scope and objectives in collaboration with internal stakeholders. Develop specifications, drawings, cable schedules, loop sheets, and material take-offs. Manage contractors performing power studies and oversee OEM relationships. Lead contract negotiations and ensure timely execution, including FAT coordination. Execute electrical projects on time and within budget, managing third-party resources. Conduct FEED studies and contribute to cost estimates and design reviews. Design duct banks, grounding systems, electrical rooms, and cable tray layouts. Specify and procure electrical components including transformers, switchgear, VFDs, and motors. Lead inspections, arc flash studies, and commissioning activities. Mentor plant engineers and technical professionals across business units. Key Requirements Accredited bachelor's degree in Electrical Engineering. 5-10 years of experience in heavy industrial environments, preferably within engineering consulting and construction services. Strong project management skills with experience leading electrical scope-only projects. Expertise in electrical design including single line diagrams, loop sheets, and grounding systems. Familiarity with manufacturing processes for cement, wallboard, and paper. Ability to manage budgets, schedules, and reporting metrics (KPIs). Excellent communication and organizational skills. Willingness to travel 3-5 days per month to support project activities. Preferred Software Knowledge Microsoft Excel (Advanced), PowerPoint, Word EasyPower, ETAP, SKM Autodesk Revit & Navisworks Manage ElumTools Ready to Lead Industrial Innovation? If you're a seasoned electrical engineer ready to take ownership of high-impact projects and drive technical excellence across a national footprint, we encourage you to apply today. Submit your resume and contact information to The Intersect Group to be considered for this opportunity.

The Staff Engineer, Electrical Design - Power develops new electrical systems/circuits for various applications/ You will research system ideas and draw up plans for these systems, and capture them in schematics and system specifications. Other responsibilities will be testing, simulation, validating and qualifying the systems and make adjustments as needed. You will need to provide support throughout the manufacturing of the electrical systems that have been designed. The role will work in cross functional teams with other designers, customers, manufacturing engineering and project leadership to ensure robust and high quality product development. You will enhance designs with feedback from reviews in areas such as manufacturing, test, supply chain, reliability, industrial design and simulations. Detailed Description Performs tasks such as, but not limited to, the following: Lead the design, development and implementation of technical solutions for complex projects, involving multiple domains. Participate in project planning and scheduling. Provides technical leadership and direction to a sizable team of engineers. May be a recognized expert (go to person) in one or more technical areas Takes responsibility for non-technical elements of an engineering project (people, financials etc.). Reviews and interprets customer requirements/specifications and may act as primary customer contract. Analyze trade-offs in complex systems and recommend solutions. Develops deployment strategies and plans. Leads the deployment of strategic complex programs and coordinates site-wide deployment efforts. May manage relationships with key vendors/partners. Design, modify and implement systems that meet customer and Celestica needs. E.g. creation of Schematics, Bills of material, diagrams, drawings, etc. Testing, simulation and measuring (including troubleshooting) the performance of systems Keep up to date with relevant industry knowledge and regulations Solve complex problems Liaison with suppliers, customers, contractors, and other internal teams. Analyze and interpret data and information Recommend modifications for systems Create reports, minutes and updates May be a recognized expert (go to person) in one or more technical areas. Knowledge/Skills/Competencies Considered a Subject Matter Expert in the area of power design Deep knowledge of DC/DC power topologies and tradeoffs Experienced in designing power systems for networking, compute, or storage products Experienced in high current, high-phase count designs for ASICs and GPUs Experienced in PCB stack-up, power planes, and tools used to simulate voltage gradients Familiarity with schematic capture and CAD layout tools Proficient with circuit simulation tools such as PSPICE and LTSPICE Knowledge of high-density power modules and Vertical Power Delivery Excellent verbal and written communication skills Ability to present to various audiences effectively Physical Demands Duties of this position are performed in a normal office environment. Duties may require extended periods of sitting and sustained visual concentration on a computer monitor or on numbers and other detailed data. Repetitive manual movements (e.g., data entry, using a computer mouse, using a calculator, etc.) are frequently required. Occasional travel may be required. Typical Experience Bachelor degree or consideration of an equivalent combination of education and experience. Educational Requirements may vary by Geography 9+ years of related experience;

Powell is a dynamic and innovative company that values collaboration, technical excellence, and professional growth. As an Electrical Engineer, you will elevate your career and make a significant impact by leading projects that craft cutting-edge solutions for diverse clients. At Powell, an Electrical Engineer holding a minimum of a bachelor's degree in electrical engineering, or a related engineering discipline with a focus on power and or control systems, will be the "technical face" on projects from concept to completion. You will be working with clients to design custom PLC, SCADA, HMI, RTU, and relay control panels to meet their technical specifications and quality standards within the constraints of the budget and the schedule. Additionally, an Electrical Engineer will learn industry standards and trends. Finally, you will join a team that fosters a supportive environment, continuous learning and development where your expertise will not only be appreciated but recognized and rewarded. Essential Responsibilities Design standard jobs with guidance to match client specifications and requirements Draft electrical construction drawings using AutoCAD in conjunction with our wiring teams Gain design knowledge to engineer various control and relay panels Work with your Supervisor and the Project Management team to help interpret project write-ups, client specifications, drawings, and other correspondence during the life of the project Create and validate Bills of Materials for client submittal and approval per Powell Standards Complete self-design reviews to verify accuracy and completeness of designs before issuing projects to Powell's manufacturing floor for construction Gain the ability to provide technical support in client meetings Coordinate with purchasing and suppliers to specify & approve component parts and assemblies Provide prompt notification to supervisor and project management for issues that impact scope, budget, and schedule Coordinate with the electrical design team for the final design and construction package to include schematics and wiring diagrams of the project Create AC and DC schematics, door component layouts, wiring diagrams, and communication drawings for project approval, construction and As-Built's drawing submittals Provide technical support as necessary for sales, application engineering, and inspection teams throughout the life of the project Assist fellow production engineers in solving problems on a daily basis Adhere to Powell's policies and procedures, work instructions, ISO policies, Safety Rules and Regulations Meet regularly with clients, suppliers and OEMs Required Experience Is Proportionate With the Selected Job Level The Engineer level requires a Bachelor's degree in an engineering discipline and 0-3 years of relevant job related experience The Senior Engineer level requires a Bachelor's degree in an engineering discipline and 4-8 years of relevant job related experience The Lead Engineer level requires Bachelor's degree in an engineering discipline and 7-10 years of relevant job related experience Minimum Qualifications BS Degree in Electrical Engineering, Electrical Technology or related area Minimum 1-3 years of experience in an Engineering role Ability to draft in AutoCAD Proficient with electrical design in PLC, SCADA, and relay control panels Basic understanding of power system, SCADA system, communications, and relay applications as applied to products Preferred Qualifications Previous experience with control panels Skills, Abilities & Other Requirements Ability to manage & prioritize multiple projects, schedules and budgets in a fast-paced environment Solid organization, communication, presentation and planning skills Ability to carry out engineering development types of tasks and address production issues Demonstrated ability to work collaboratively with others in a cross-functional team environment Strong problem-solving skills, and the ability to troubleshoot system-level problems Basic understanding of communication drawings and point to point wiring diagrams Basic understanding to being very proficient with power distribution equipment (switchgear relays, PCR, E-Houses, etc.) Able to apply applicable sections of the National Electric Code and other codes and standards such as IEEE, ANSI and UL in day-to-day activities Able to form and apply cost competitive techniques to develop the most cost-effective solution for the engineered to order product Possess a strong customer service commitment Basic understanding to being very proficient at drawing reviews (i.e., acquired knowledge of specification items that Powell should take exception to and specification items that require special attention; able to accurately interpret client specifications, etc.) Working & Environmental Conditions The employee typically performs duties in a normal office environment. There will be some work in a shop environment and exposure to the elements of our shop. Additionally there may be some work performed in the field with exposure to construction sites or active customer facilities. It is the policy of Powell Industries to promote safe working conditions for ALL employees, to make available where necessary special equipment to protect employees against specific hazards, to reduce accidents through prevention programs and to establish rules that are designed for the safety of all. It is the responsibility of each employee to adhere to this policy, as well as to observe all safety practices and exercise every precaution for the safety of accidents. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to use hands to finger, handle, feel, carry or operate objects, tools or controls and reach with hands and arms. The employee frequently is required to stand; talk or hear; walk; sit. Specific vision abilities required by this job include close vision and the ability to adjust focus. More Information This job description outlines the essential functions of the job and does not contain a comprehensive list of all possible responsibilities, tasks, and duties In our 75+ year history, Powell has always known that our employees are at the heart of our success. Without question, we have the most talented people in all parts of our organization. As a manufacturer, we recruit and hire experienced and knowledgeable applicants to ensure our product is engineered, fabricated, and assembled to customer specifications! Powell's culture has and will always be founded in our "can do" attitude. If we can imagine it, we can do it. Become a part of our story and let us help you write yours. Hard work pays off in all our teams, with opportunity for advancement and promotion without sacrificing work-life balance. Successful candidates must have a legal authorization to work in the United States on a full-time basis, with only those candidates selected for interview contacted. Powell offers comprehensive health insurance for you and your family, 401k savings, annual bonus potential, generous paid time off, professional development opportunities, company-sponsored wellness programs, and a collaborative work environment. EOE Protected Veterans/Disability If you need an accommodation in the hiring process, you may contact . Application status inquiries will not be accepted in this manner.

Are you passionate about human space exploration, understanding the origins of the universe, and working with a passionate and diverse team to make a difference? If you are, we need you! We need your talent, teamwork, and energy to help us achieve great things that inspire people all over the globe. We need you to bring creative ideas and diverse backgrounds to help us envision, shape, and deliver systems that will enable the exploration of space while benefiting people here on Earth. We are excited about what we do, and we need you on our team as we take on exciting challenges for NASA's pursuits in deep space exploration. As NASA's largest engineering solutions provider working together with NASA at centers across the United States. The JETS II Contract is seeking a motivated Project Engineer, Electrical Power Systems to join the team with ERC, a teammate company. The Project Engineer will join the Volatiles Investigating Polar Exploration Rover (VIPER) team. This role is ideal for an early-career engineer with a strong foundation in electrical systems, integration, and hands-on test engineering, who is ready to take on a stretch assignment and grow into a technical leadership role. The Project Engineer, Electrical Power Systems will: * Support the design, integration, and test of VIPER's electrical power subsystem * Develop mock-ups and support subsystem assembly activities * Perform troubleshooting and contribute to test and verification (T&V) activities * Work with electrical and mechanical systems, supporting anomaly resolution * Generate technical documentation * Serve as part of the Mission Operations team that will participate in Lunar operations after launch. * Grow into a technical leadership role supporting VIPER's electrical power subsystem and mission operations Requisition Qualifications: This position has been posted at multiple levels. Depending on the candidate's experience, requirements, and business needs, we reserve the right to consider candidates at any level for which this position has been advertised. * Typically requires a bachelor's degree in Engineering with experience in the field or in a related area. * Hands-on experience with hardware assembly, testbed development, and troubleshooting * Familiarity with electrical schematics, wiring, and control panel design * Experience with PLC/HMI programming, LabVIEW, or similar test automation tools * Ability to work with common hand tools and perform mechanical/electrical integration tasks * Strong organizational and communication skills; self-motivated and adaptable * U.S. Citizenship required Requisition Preferences: * Bachelor's degree in Electrical Engineering and 1-5 years of relevant experience * Internship or co-op experience at NASA or in aerospace test environments * Experience with PCB design (Altium), SPICE simulation, or relay/ladder logic * Familiarity with JSC processes, engineering life cycle, and spaceflight hardware * Exposure to avionics or power systems integration and test * Experience with discrepancy reporting, test procedure development, and anomaly resolution * Interest in growing into a technical SME role supporting mission operations and subsystem performance Why Join Our Team? In addition to exciting career opportunities, we also have: Excellent personal and professional career growth 9/80 work schedule (every other Friday off), when applicable Onsite cafeteria (breakfast & lunch) Much, much more! For more information on our partnership with NASA at Johnson Space Center (JSC), please visit ************************* Proof of U.S. Citizenship or US Permanent Residency may be a requirement for this position. Must be able to complete a U.S. government background investigation. Management has the prerogative to select at any level for which the position is advertised. Essential Functions Work Environment Generally, an office environment, but can involve inside or outside work depending on task. Physical Requirements Work may involve sitting or standing for extended periods (90% of time). May require lifting and carrying up to 25 lbs. (5% of time). Equipment and Machines Standard office equipment (PC, telephone, printer, etc.). Attendance Regular attendance in accordance with established work schedule is critical. Ability to work outside normal schedule and adjust schedule to meet peak periods and surge requirements. Other Essential Functions Professional behavior that enhances productivity and promotes teamwork and cooperation. Grooming and dress must be appropriate for the position and must not impose a safety risk/hazard to the employee or others. #JETS #JETSII

About Archaeabp is committed to investing in lower carbon energy so we can meet our ambition to reach net zero by 2050. And while we're still mostly in oil and gas today, bioenergy is one of our five transition growth engines and a key focus to help us support the global energy transition.Archaea Energy, a bp company, is a leader in landfill gas to energy and the largest renewable natural gas (RNG) producer in the US. With big ambitions, we specialize in the development, construction and operation of RNG, landfill-gas-to-electric and dairy digester facilities. The team operates around 50 sites in 32 states with a robust development pipeline.About the role The Instrument & Control Engineer reports to the Senior Director of Controls Engineering. The Instrument and Control Engineer understands Instrument & Control system requirements that drive the design of our technical solutions. The Archaea Instrument & Control Team provides engineering services in all project phases as well as ongoing operations support after facilities have started up. This include analysis, Instrument and Control design feedback, service design, greenfield/brownfield development, C&E development, commissioning, and construction management. Addresses required changes on site and creates solutions to complete equipment installation as designed. Analyzes/understands/utilizes project requirements and develops sound solutions (PLC programming, controls devices/equipment). Key accountabilities Interacts with both internal Archaea's software teams and/or third-party software groups to ensure that the overall internal customer solution is sound.Participates with other I&C Engineers to develop correct customer solutions.Programs PLC code, HMI development and verification to support equipment operations. Guides others or performs I/O checkout and wiring verification.Employs technical knowledge to support our customer service group.Support the integration of control systems with hardware and software components.Participate in testing and troubleshooting of control systems to ensure optimal performance.Document system designs, test plans, and results for internal and client use.Collaborate with cross-functional teams to support project goals and timelines.Continuously enhance your technical knowledge and skills through training and mentorship.Essential education Bachelor's Degree in Electrical or Chemical Engineering, Electrical or Instrumentation Engineering Technology, Computer Systems Engineering or related field; or equivalent combination of education and experience Essential experience10+ years experience managing teams supporting control systems for projects or operations of oil/gas, refining, RNG, chemical plants, etc.Knowledge of gas processing, process control, analyzers, electronic gas measurement and control loop tuning Experience with Allen Bradley PLCs and I/O hardware and AVEVA System Platform HMI preferred Experience with control system networks and communications Knowledge of digital security for process control networks Experience with historians and PIExperience with Alarm Management and Safety Instrumented SystemsTo perform this job successfully, an individual should have highest degree of proficiency in Microsoft Word; Microsoft Excel; Microsoft OutlookStrong verbal and written communication skills (including analysis, interpretation, & reasoning). Ability to develop and maintain collaborative relationships with peers and colleagues across the organization, as well as internal and external clients. Ability to work well autonomously and within a team in a deadline-oriented environment. Ability to work with and influence peers and management. Self-motivated with critical attention to detail, deadlines and reporting. Must possess a valid driver's license.Desirable criteria Previous I&C experience within Upstream is preferred. Familiarity with control theory and basic knowledge of instrumentation and automation systems.Why join us?Delivering a better and more balanced energy system requires many different approaches and solutions. All of us have a part to play. We aim to support our people to learn and grow in an inclusive environment in which everyone is respected and treated fairly. So, if you have the right skills, commitment and courage to help us invest in today's energy system and build out tomorrow's, apply today!How much do we pay? $118,000-$169,000. *Note that the pay range listed for this position is a genuinely expected and reasonable estimate of the range of possible base compensation at the time of posting.This position offers paid vacation depending on your years of relevant industry experience and will range from 120 - 240 hours of vacation per year for full times employees (60 - 240 hours of vacation per year for part time employees). You will also be eligible for 9 paid holidays per year and 2 personal choice holidays. You may learn more about how we calculate paid vacation and view our generous vacation and holiday schedules at benefits@bp. Bp has a parental leave policy as well, which offers up to 8 weeks' paid leave for the birth or adoption of a child. Learn more at **************** our industry-leading team and you'll receive a reward and wellbeing package to enable your work to fit with your life. These include, but are not limited to:Discretionary Annual Bonus ProgramQuarterly Momentum Bonus 401K ProgramHealth, Vision, And Dental InsuranceLife InsuranceShort-Term DisabilityLong-Term DisabilityBut above all? You'll play a key part in helping bp deliver our ambition - to be a net zero company by 2050 or sooner and help the world get to net zero. Apply today!

I'm currently hiring Field Engineers for HVAC, Coolers & Chillers projects across multiple U.S. locations. If you meet the requirements below, please send your resume to ***************************** Strong field experience supporting large-scale projects, including construction support, system startup, repair, and ongoing maintenance activities Hands-on experience with variable frequency drive (VFD) startup, commissioning, and troubleshooting Technical experience working with centrifugal chillers, cooling tower systems, and associated VFD-driven equipment Familiarity with verifying system installation and operation against applicable industry standards, codes, and best practices Must be a U.S. Citizen, Permanent Resident, or Green Card holder

This role offers the opportunity to work across a broad range of building projects, with the ability to handle smaller assignments independently while receiving mentorship and technical guidance on more complex efforts. Engineers in this role are involved throughout the full project lifecycle-from concept development through construction-and collaborate closely with in-house teams across multiple disciplines. The ideal candidate is motivated by continuous learning, enjoys working on diverse project types, and values a clear career path with access to training and professional development at all levels. Qualifications: • Bachelor's degree in Electrical Engineering or a related engineering discipline from an accredited program • Professional experience using Revit • Several years of experience in an architectural or engineering consulting environment • Demonstrated ability to manage multiple tasks, meet deadlines, and communicate effectively • Strong technical foundation with clear written and verbal communication skills Preferred (but not required): • Exposure to a variety of project types such as fire stations, police facilities, detention facilities, restaurants, retail, mixed-use developments, healthcare, commercial buildings, aviation facilities, and data centers • Professional Engineer (PE) license or actively working toward licensure

Clayton Services is searching for an Electrical Design Engineer to join a thriving company in North Houston. Job Type: Direct Hire Pay Rate: $80,000 - $90,000/annually Benefits: Medical, dental, vision, 401K, PTO, and more. Electrical Design Engineer Responsibilities: Design and draft electrical schematics, electrical back plate vinyl, and operator vinyl for HVACR manufacturing projects Design electrical aspects of HVACR units Assist with testing and troubleshooting new HVACR units Research, develop, and design new electrical systems for HVACR projects Provide engineering support throughout the manufacturing process Design and test prototypes Document schematics, specifications, and diagrams Complete reports Other duties as assigned Electrical Design Engineer Skills and Abilities:Excellent communication skills Excellent attention to detail and organizational skills Excellent time management skills Ability to work successfully in a fast-paced work environment Ability to work successfully on multiple projects simultaneously AutoCAD proficiency Electrical Design Engineer Education and Experience: A minimum of a bachelor's degree in electrical engineering is required A minimum of five years of relevant electrical engineering work experience is required Electrical Design Engineer - Immediate need. Apply today!

A multi-disciplinary architectural, engineering and construction firm is seeking a Junior Engineer, to help them build a better future by bringing your technical expertise to their Dallas, TX office. Your Day Includes Conduct building envelope assessments, including visual inspections and diagnostic testing Analyze data and prepare reports on building envelope performance Assist in the design of building enclosure systems, including the selection of materials and detailing Conduct site visits during construction to ensure compliance with design and specifications Provide technical support to clients and project teams Must Haves Bachelor's degree in architecture, engineering, or building technology 2-5 years of relevant construction or related field experience in roofing, waterproofing, glazing installation, lab or field testing, or related building envelope systems Two years of experience in building enclosure consulting or related fields preferred P.S. In addition to offering a comprehensive health, dental, and vision package, the firm also provides a Costco Card and Gym Membership. If you have the necessary qualifications and are excited about this opportunity, we encourage you to apply. We look forward to hearing from you.

Direct Hire - Full Time position in Mineral Wells, TX 2693 with a leading aerospace and defense company * Electrical Design Engineer - Altium * Please apply ONLY if you have experience with Altium and PADS United States Citizenship is required due to government contract requirement; we are unable to sponsor at this time. We can ONLY consider your application if you have: 1: Associates degree (AA) from a two or four-year college or university. 2: 2+ years related experience and/or training, or equivalent combination of education and experience in a manufacturing environment. 3: Experience with Altium and PADS. 4: Excellent spoken and written communication skills. 5: U.S citizenship (government-related work) 6: Able to work a 4/10 work schedule We are looking for an Electrical Design Technician to design and test circuit layouts for electronic components and devices for the company's Military Aircraft Group. This person will have an onsite work schedule at the business unit in Mineral Wells, TX. DESIRED (not required) SKILLS: :: Electronic Computer aided Design (ECAD)/Computer Aided Manufacturing (CAM) experience :: Electronic Design Architecture (EDA) experience Duties and Responsibilities == Manage library components and perform PCB layout, ensuring high quality and accuracy in PCB layout. == Perform PCB layout reviews with design and hardware engineering teams. == Design PCB layouts for various electronic devices and components. == Collaborate closely with engineers to understand the requirements of circuit design. == Ensure the PCB design meets all electrical and physical specifications. == Perform layout verification and test to ensure the functionality and integrity of the design. == Create and maintain design documentation, including schematics, bill of materials, and fabrication and assembly instructions. == Field supplier questions related to BoM's, Gerber data and schematics and other information as requested. Please send resume to - Amarx Search, Inc. - amarx.com

Required Qualifications & Experience MUST HAVE Altium experience. Client will not consider candidates without Altium Strong experience with MOSFET applications and power electronics design Proven experience in PCB schematic design, layout, and fabrication Hands-on experience with electrical measurements, sensing, and protection circuits Experience designing systems operating in the High Voltage, 36V-150V voltage range and 10A-80A current range Practical, hands-on experience working in a lab environment, including testing and validation Solid experience working with battery-based systems (all battery chemistries considered) lithium batteries, lead acid batteries, ANY TYPE OF BATTERIES Preferred Qualifications Experience with MCU and peripheral circuit design Familiarity with communication interfaces (e.g., CAN, UART, SPI, I²C, etc.) Experience with higher voltage and/or higher current power systems Knowledge of EMC/EMI mitigation and radiation-compliant design practices

Job Description - Instrumentation and Controls Engineer BCR Environmental Corporation is a solutions company transforming the way municipalities and industrial processors treat and manage biosolids, organic wastes, and other process streams. BCR patented technologies convert organic waste and other process streams into valuable products that may be further processed or used as end products. BCR is growing rapidly because we offer solutions that lower costs and reduce risk. BCR has a significant U.S. market position as a technology innovator and leader in the municipal biosolids sector. Our Whole Solutions eliminate odor, improve regulatory compliance, simplify biosolids and organics management, and convert waste streams into renewable resources. Further, BCR is rapidly expanding into industrial markets through resource recovery projects, environmental remediation, and difficult heat transfer and processing solutions. BCR has an outstanding opportunity to add an Instrumentation and Controls Engineer to work within the company Engineering team. BCR maintains a family first culture and a fun working atmosphere, where each person contributes to a successful team. If you are looking for a place to immediately provide impact and grow in a high growth and sustainable industry - this is the place. Position Type: Full time, salaried. POSITION POSTING: Houston, TX Position Summary: Design, develop, and verify integrated industrial product control systems compliant with all regulatory requirements for BCR's OEM wastewater treatment products and industrial products. Ensure successful integration into customer operational systems and facilities. Applies knowledge and understanding of programming and troubleshooting plant controls processes and the equipment used to control those processes. Makes recommendations to improve the control of the processes or the processes themselves. Supports the maintenance of plant equipment to ensure a minimum of downtime. ESSENTIAL FUNCTIONS Design control systems hardware and software for industrial equipment products consisting of water treatment, solids separation and handling, thermal drying, solids conveyance, and chemical injection. Interface with motors, field instrumentation, analyzers, and SCADA, satisfying all customers function needs and requirements. Using a systems engineering framework, identify all "stakeholders" interacting with a product over its lifecycle and analyze needs and requirements Work with process, mechanical, and electrical engineers, and customer's system engineers to understand and optimize control designs that meet customer requirements Analyze customer process requirements and mechanical/electrical components to design and specify required software and control system components Design, implement, configure, test, and finalize product control designs ensuring complete and reliable performance throughout the operating life cycle; estimate product reliability values Collect and analyze product data to recommend and implement continuous improvements on BCR's product control designs while reducing cost and increasing performance Provide customer technical support Incorporate supplier, customer, and user inputs to continuously improve product control ease of use while enhancing customer value Analyze product installation and field test data (lessons learned) and incorporate those corrections/improvements into new product designs Work as a proactive team member to continuously improve all BCR's product controls and processes Perform risk and sensitivity analysis for product control designs and associated engineering changes Provide manufacturing support for all product control design issues as necessary Identifies commercial control system/software components and suppliers and recommends optimal component purchases or in-house development to meet BCR's product requirements Designs, implements, configures, tests and debugs software/control system components for BCR's products ensuring complete and reliable product operation Trains and instructs BCR's personnel on usage of system to track customers' operations including design of reports for use by BCR or customer Troubleshoot, modify, and test controls systems hardware and software in field settings with regards to site safety and reporting structure. Assists in process control loop tuning, calibration, improvement, and documentation in field settings. Trains clients in operation and troubleshooting of equipment with respect to controls. Configures parameters and troubleshoots motor drives. Isolates and corrects defective designs, valves, equipment, and contaminated systems, improperly working electronic units, and other malfunctions or inefficient processes. Pull, tag, and terminate wires, installs instruments, and bend stainless steel tubing as needed in field settings. Reads, understands, and comments on process schematics and mechanical, electrical blueprints. Design network topology for ethernet I/O devices, remote I/O panels, connectivity to customer networks, site manager devices, data storage and reporting devices. Minimum Requirements: BS Electrical or Controls Engineering degree preferred, others suitable with commensurate experience 8-10 years of experience working with PLC controls, logic circuits, hydraulic, pneumatic, and electrical equipment Excellent proficiency to read, write, and understand the English language. Climb stairs and ladders, comfortable working at heights. Knowledge of PLC (preferably Allen Bradley, CompactLogix or ControlLogix). Knowledge of VFD (preferably Allen Bradley, PowerFlex). Knowledge of Inductive Automation Ignition Platform Available for 24-hour on-call shifts, swing, and graveyard shifts, specifically in field settings during start-up or commissioning. Travel up to 20%, potential. >2 years of experience in working and interacting with customers and vendors. >2 years of experience in developing budgets, schedules, plans and forecasts. Skilled in MS Excel, MS Word, MS Project, and MS PowerPoint Skilled in AutoCAD Electrical Toolset for formation of electrical documentation, including wiring diagrams, single line diagrams, panel drawings, riser diagrams etc. Desired Skills: Industrial control systems/software design and implementation including Digital I/O, Analog I/O, ladder logic, motion control, PID control, HMI, temperature, pressure and flow control, data collection and charting 3+ years experience developing control system solutions using commercial SCADA, PLC, and industrial I/O control components (e.g., Rockwell, Siemens, GE, Schneider, Mitsubishi, Watlow, Eurotherm) Experience with industrial network/communication technology including one or more of the following: OPC, Modbus, DeviceNet, HART, Profibus, Ethernet/IP, RS-485 Object Oriented Software Design Relational database design and implementation Ergonomic and intuitive HMI (Human Machine Interface) design and implementation Experience in developing control systems for products that support industry environmental/safety standards and municipal government regulations Experience in speaking effectively before groups of customers or employees of organization. Experience defining problems, collecting data, establishing facts, and drawing valid conclusions. Benefits: Ten Paid Holidays 80 hours of PTO Benefits to include: Medical Vision Life Insurance Short Term Disability Long Term Disability 401K Equal Opportunity Employer Statement: BCR Environmental is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. All employment decisions at BCR Environmental are based on business needs, job requirements, and individual qualifications, without regard to race, color, religion, sex, gender identity, sexual orientation, national origin, age, disability, protected veteran status, or any other characteristic protected by applicable laws. We are committed to ensuring that all employees feel respected and valued.

Texas Motor Speedway is a key location in the Speedway Motorsports nationwide network of entertainment venues. Speedway Motorsports maintains a consistent focus on four core principles: Take care of teammates Be known for remarkable events Positively impact our community Profitably improve Position Responsibility:Install, maintain, and troubleshoot/repair facility electrical systems. Provide electrical setup, monitoring, and teardown for race weekends and corporate events. Conduct routine inspections of electrical infrastructure-including backup generators, chillers, concession equipment, track lighting, and emergency systems-to ensure reliability and compliance. Install temporary power distribution for vendors, TV and radio broadcast partners, race teams, hospitality clients, and special event areas. Manage ongoing improvements to facility electrical systems, such as LED lighting upgrades, energy efficiency initiatives, and new construction projects. Assist with technology installations, timing and scoring systems, public address systems, and facility IT needs. Support Building Supervisors in the Speedway Club and Lone Star Tower buildings with various projects throughout the year. Other duties assigned by the Director of Operations & Vice President of Operations. Requirements: Valid Texas Journeyman (or Master) Electrician License. 3+ years of experience in commercial, industrial, or venue high voltage electrical work. Strong knowledge of NEC codes, electrical safety standards, and complex commercial power systems. Ability to work at heights, in confined spaces, around loud environments, and in varying weather conditions. • Physical ability to lift 50 lbs., climb ladders, and stand or walk for extended periods. • Basic computer skills for work order systems and email communication. • Strong communication/problem-solving skills and attention to detail. • Ability to work independently and prioritize tasks efficiently. Positive attitude and creative problem solver who enjoys multi-tasking. Familiarity with lighting control systems, LED sports lighting, and building automation. Position Type: Full-time Compensation: Negotiable based on prior work experience Benefits:Medical, dental, and other insurance benefits 401(k) plan Vacation and paid holidays Interested Applicants: Submit a resume and cover letter (if desired) to: *************************** We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, national origin, sex, sexual orientation, age, disability, gender identity, marital or veteran status, or any other protected class. Job Questions: Do you have a valid Texas Journeyman (or Master) Electrician License?

Civil & Installation Engineer to join the Owner's project team on a large-scale industrial construction project in Baytown, Texas. This role is critical to ensuring that civil, structural, and mechanical installation activities are executed safely, efficiently, and in full compliance with project requirements. The Civil & Installation Engineer will act as the primary technical representative on site, coordinating between the Owner, General Contractor, subcontractors, and engineering teams to drive successful project delivery. Key Responsibilities: Construction Supervision & Field Engineering • Ensure all construction activities comply with approved drawings, specifications, and contract requirements. • Review field conditions and provide technical direction and problem-solving support. • Monitor construction methods and sequencing to ensure constructability and efficiency. Technical Coordination • Serve as the technical liaison between design engineers, general contractors, subcontractors, and the Owner. • Manage RFIs, submittals, shop drawings, and field change coordination. • Participate in weekly coordination and progress meetings. • Support resolution of technical issues and design clarifications. • Ensure proper documentation and communication across all stakeholders. Quality Control & Compliance • Verify that all work complies with the Project Quality Management Plan, codes, standards, and Owner requirements. • Conduct field inspections, First Work in Place (FWIP) reviews, and pre-installation meetings. • Monitor Inspection and Test Plans (ITPs) and witness key quality milestones. • Track non-conformances and ensure timely corrective actions. • Support accurate recordkeeping in project management systems (ACC/Procore). Schedule & Progress Monitoring • Track daily and weekly construction progress against the project schedule. • Identify potential delays and recommend recovery actions. • Review contractors look-ahead schedules and resource plans. • Support earned value and performance reporting. Commissioning & Turnover Support • Support installation readiness for commissioning activities. • Verify mechanical completion and assist with punch list closeout. • Support system turnover documentation and pre-commissioning efforts. Qualifications Education • Bachelor's degree in civil engineering, Mechanical Engineering, Construction Engineering, or a related field. Experience • Minimum 5-10 years of construction site experience, preferably in industrial or process facility projects. • Proven experience in: o Heavy civil construction o Structural steel erection o Mechanical and equipment installation o Piping and utility systems • Experience working on chemical plants, refineries, or large industrial facilities is strongly preferred. Technical Skills • Strong ability to read and interpret: o Civil and structural drawings o Mechanical installation drawings o P&IDs and technical specifications • Familiarity with industry standards such as ACI, AISC, ASME. • Proficiency with Microsoft Office. • Experience with construction management platforms (Procore, ACC, Primavera) preferred. Personal Skills • Strong organizational and communication skills • Problem-solving mindset with attention to detail • Ability to work effectively in a multicultural team environment • Leadership and coordination capabilities Performance Expectations Success in this role will be measured by: • Quality and compliance of installed work • Effective coordination between stakeholders • Timely resolution of technical issues • Schedule adherence and progress tracking • Accuracy of documentation and reporting • Reduction of rework and non-conformances Work Environment • Full-time, site-based position • Primarily field-focused with some office responsibilities • Standard schedule of 5-6 days per week as project demands

Job Title: I&C Design Engineer Employment Type: Direct Hire Salary: $110-130k Benefits: Medical, Dental, Vision Life Insurance 401k PTO Holiday Summary: Akkodis is seeking an I&C Design Engineer for a DIRECT HIRE position in the Katy, TX area. The desired candidate will have 5+ years of previous experience in CAD design for electrical instrument and controls. The I&C Engineer will be responsible for the design/development of industrial control systems including SCADA, PLC, and HMI systems. A strong expertise in Revit and AutoCAD is required. This is an excellent opportunity to support an exciting company in the electrical engineering industry. ***Remote 1 day/week, and off every other Friday*** Responsibilities: Site assessment and determination of needed instrumentation/SCADA upgrades Review of existing project documents - P&ID, system architecture, electrical drawings Coordination with clients on specific needs Document findings - Write assessment or report of existing conditions and recommendations Design/development of project drawings, including P&ID, system architecture, loop diagrams, installation details Create project specifications, including instrumentation, networking, control narrative strategies, software and hardware requirements for SCADA, PLC, and HMI systems Quality Control/Quality Assurance of project documents Attend/Conduct project meetings with client Review and comment on project submittals Coordination with Electrical Engineering Department Required Skills: Bachelors Degree in an Engineering related field is preferred. A minimum of 5 years of relevant drafting experience is required. MUST HAVE electrical design experience for industrial systems like water/wastewater, oil/gas, etc. Must have experience designing SCADA, PLC, and HMI systems. Strong background in both AutoCAD and Revit is preferred. Registered Professional Engineer (PE) or Engineer-in-Training (EIT) in Texas is preferred. Experienced in the design of construction documents. Write Technical Memoranda based on site assessment. Drawing/PDF markups. Design relay schematics (motor control). PLC and SCADA HMI development and creation of PLC I/O lists Wide Area Network (WAN) design, including radio and cellular communications Fiber optic cable specification Control panel design VFD design/interface Physical and cybersecurity assessment and design preferred. A proactive, solution-oriented approach to challenges, with a focus on team success. Strong ability to foster and maintain professional, cross-functional relationships. If you are interested in this I&C Engineer job, then please click apply through Akkodis. Equal Opportunity Employer/Veterans/Disabled To read our Candidate Privacy Information Statement, which explains how we will use your information, please visit ********************************************** The Company will consider qualified applicants with arrest and conviction records.

An exciting career awaits you At MPC, we're committed to being a great place to work - one that welcomes new ideas, encourages diverse perspectives, develops our people, and fosters a collaborative team environment. Responsibilities: As an Electrical Engineer at a Marathon refinery, you can expect to become familiar with industry codes and best practices, build critical thinking skills, and gain an understanding of how all engineering disciplines work together as a cohesive team. You will also gain knowledge of various aspects of a refinery by working with a team of professionals who run a specific portion of the refining process. Most often, Electrical Engineers will have an opportunity to work on more than one area of the refinery, leading to a broad understanding of how the plant operates. Finally, you will have the opportunity to expand your written and verbal presentation skills in a professional work environment. The majority of Electrical Engineering co-ops and interns enter into the following positions: Electrical & Instrumentation (E&I) Project Engineers work on a variety of real-world electrical and instrumentation projects in a refinery setting. During your time at MPC, you will develop and utilize project management skills including scope alignment, cost and schedule development, and teamwork through multiple engineering phases. You will also support the area teams. We are committed to developing engineers into professional project managers who successfully manage projects of all sizes. Reliability Electrical & Instrumentation (E&I) Engineers troubleshoot Electrical & Instrumentation issues at the refinery. As a reliability intern, you will help analyze failures of equipment, develop solutions for recurring equipment difficulties, submit Project Request Forms (PRF's) to implement solutions, and understand equipment maintenance strategies. There will be opportunities to use electrical analysis software to solve coordination issues and run Arc Flash studies for the power system, as well as learning and understanding about how our critical Refinery Safety Instrumented Systems (SIS) are applied. Process Control / Technical Service Engineers can work on a wide array of projects in support of the process control systems installed throughout the refinery and products movements areas. The process control systems in the refinery provide real-time control and data acquisition functions in support of operating the refinery process and electrical equipment. Typical college co-op assignments include the following: troubleshooting system power supply problems, control system programming, hardware and software lifecycle replacement projects, installing and troubleshooting communication networks and monitoring control system performance metrics. Qualifications: + Candidates must be majoring in Electrical Engineering + Strong academic performance + Candidates must be authorized to work in the US on a full-time indefinite basis without the need for employment visa sponsorship now or in the future. + Positions are available spring, summer, and fall semesters + Availability for multiple work terms is preferred + A valid driver's license is required + Concurrent enrollment in a degree seeking program + Military experience a plus + MIN - $32.31 per hour / MAX - $40.89 per hour Learn more about Marathon Petroleum's benefits at ********************* As an energy industry leader, our career opportunities fuel personal and professional growth. Location: Findlay, Ohio Job Requisition ID: 00018188 Pay Min/Max: $0.00 - $999.99 Hourly Grade: HRLY1 Location Address: 539 S Main St Additional locations: Anacortes, Washington, Canton, Ohio, Catlettsburg, Kentucky, Detroit, Michigan, El Paso, Texas, Garyville, Louisiana, Kenai, Alaska, Mandan, North Dakota, Martinez, California, Robinson, Illinois, Salt Lake City, Utah, St Paul Park, Minnesota, Texas City, Texas, Wilmington, California Education: High School (Required) Employee Group: Part time Employee Subgroup: Intern Marathon Petroleum Company LP is an Equal Opportunity Employer and gives consideration for employment to qualified applicants without discrimination on the basis of race, color, religion, creed, sex, gender (including pregnancy, childbirth, breastfeeding or related medical conditions), sexual orientation, gender identity, gender expression, reproductive health decision-making, age, mental or physical disability, medical condition or AIDS/HIV status, ancestry, national origin, genetic information, military, veteran status, marital status, citizenship or any other status protected by applicable federal, state, or local laws. If you would like more information about your EEO rights as an applicant, click here (*********************************************************************************************************************************** . If you need a reasonable accommodation for any part of the application process at Marathon Petroleum LP, please contact our Human Resources Department at *************************************** . Please specify the reasonable accommodation you are requesting, along with the job posting number in which you may be interested. A Human Resources representative will review your request and contact you to discuss a reasonable accommodation. Marathon Petroleum offers a total rewards program which includes, but is not limited to, access to health, vision, and dental insurance, paid time off, 401k matching program, paid parental leave, and educational reimbursement. Detailed benefit information is available at mympcbenefits.com. The hired candidate will also be eligible for a discretionary company-sponsored annual bonus program. Equal Opportunity Employer: Veteran / Disability We will consider all qualified Applicants for employment, including those with arrest or conviction records, in a manner consistent with the requirements of applicable state and local laws. In reviewing criminal history in connection with a conditional offer of employment, Marathon will consider the key responsibilities of the role. About Marathon Petroleum Corporation Marathon Petroleum Corporation (MPC) is a leading, integrated, downstream energy company headquartered in Findlay, Ohio. The company operates the nation's largest refining system. MPC's marketing system includes branded locations across the United States, including Marathon brand retail outlets. MPC also owns the general partner and majority limited partner interest in MPLX LP, a midstream company that owns and operates gathering, processing, and fractionation assets, as well as crude oil and light product transportation and logistics infrastructure.