Electronics technician jobs in Canton, OH - 251 jobs

Job Summary/Purpose: Responsible for the processes relating to electronic systems, instrumentation, PLC's, and the repair, maintenance and installation of electronic equipment and systems. Starting rate - $41.93/hr 2nd shift, M-F 1:30pm - 10:00pm Essential Responsibilities Participate/support the KHMS process and assist in the development of the system and operational standards and corrective actions. Assist in installations of electronic devices throughout the production processes and factory, ensuring conformance to specifications. Problem solving efforts concerning electronic, PLC's, and instrumentation equipment to minimize failures and downtime. Provide assistance to engineering concerning the design and installation of new systems. Provides for the proper communication and interface between the factory installations, vendors, and factory IS systems as applicable, utilizing software, servers, modems, etc. Responsible for Computerized Maintenance Management and activity scheduling for Production Maintenance. Responsible for developing and recommending improvements to equipment, methods, layout, and procedures pertaining to department operations. Reduce chronic problems and optimize performance of existing systems through analysis and implementation of solutions. Responsible for keeping costs at a minimum for efficient operation, proper care and economical use of materials. Identify cost reduction improvement opportunities through accurate machine repair history and downtime records. Ensure that all work complies with OSHA, the National Electrical Code, and that all work is completed in safe manner and displays good quality workmanship. Training and Safety - Provide a safe and healthful work environment for all personnel through consistent support of the company's Heinz Safety Process. Support safety processes including, but not limited to, hazard identification and elimination, area inspection, job skills, and compliance and safety training/meetings. Follows all policies and safety regulations. As necessary, other duties and/or projects may be assigned. Education and Experience Two-year certificate from college or technical school; or two to four years related experience and/or training; or equivalent combination of education and experience.. Skills, Knowledge and Abilities Working knowledge of personal computers, PLC's and local IS systems. Particularly Alan Bradley Micro Logic, Slick 500, 5000 Platform as well as Data Highway 485+ and Ethernet. Ability to multitask and work in a team oriented fast-paced environment. Excellent interpersonal, organizational, presentation and facilitation skills. Willingness to grow with the organization. Must have the ability to exercise considerable judgment and strategic planning. Incumbent must have excellent written and verbal communication skills to deal with both internal and external customers. Incumbent must have excellent planning/organization and interpersonal skills. Ability to identify and solve problems. Must be able to work flexible hours; days, afternoons, midnights, and weekend work. Infrequent travel requirements. Detail and process oriented. Physical/Mental Requirements Ability to stand, walk, sit, climb, balance, stoop, kneel, crouch and crawl. Ability to use hands/arms to reach, handle, or feel objects, tools or controls. Ability to work in all areas of the facility including hot and cold areas, and be exposed to wet and humid conditions. Must be able to lift and or move up to 50 lbs or more. Must have excellent vision, distant and peripheral, with the ability to identify and distinguish colors, and adjust focus. The noise level in the work environment is usually high, and ear protection is required. Work near moving mechanical parts, high and/or confining places and in outside weather conditions. Benefits: Coverage for employees (and their eligible dependents) through affordable access to healthcare, protection, and saving for the future, we offer plans tailored to meet you and your family's needs. Coverage for benefits will be in accordance with the terms and conditions of the applicable plans and associated governing plan documents. Wellbeing: We offer events, resources, and learning opportunities that inspire a physical, social, emotional, and financial well-being lifestyle for our employees and their families. You'll be able to participate in a variety of benefits and wellbeing programs that may vary by role, country, region, union status, and other employment status factors, for example: Physical - Medical, Prescription Drug, Dental, Vision, Screenings/Assessments Social - Paid Time Off, Company Holidays, Leave of Absence, Recognition, Training Emotional - Employee Assistance Program , Wellbeing Programs, Family Support Programs Financial - 401k, Life, Accidental Death & Dismemberment, Disability Location(s) Massillon - Hourly Kraft Heinz is an Equal Opportunity Employer that prohibits discrimination or harassment of any type. All qualified applicants are considered for employment without regard to race, color, national origin, age, sex, sexual orientation, gender, gender identity or expression, disability status, protected veteran status, or any other characteristic protected by law. Applicants who require an accommodation to participate in the job application or hiring process should contact ***********************.

As an Electronics Technician Level III, you will be responsible for the repair, overhaul, and testing of aircraft electrical components and subcomponents. This role primarily involves bench work and requires a detailed understanding of the interrelationships of circuits. You will perform tasks such as troubleshooting, diagnosing, disassembling, assembling, repairing, and testing electronic assemblies and subassemblies, including circuit cards and electrical controls. **Responsibilities** + Repair, overhaul, and test aircraft electrical components and subcomponents as required by work orders. + Troubleshoot, diagnose, disassemble, assemble, repair, and test electronic assemblies and subassemblies to the component level. + Exercise independent judgment in performing circuit analyses, calculating wave forms, and tracing relationships in signal flow. + Use complex test instruments such as digital oscilloscopes, logic analyzers, spectrum analyzers, high frequency pulse generators, frequency synthesizers, distortion analyzers, and complex computer control equipment. + Disassemble, prepare, and inspect components, subassemblies, and final assemblies such as various aerospace and avionics systems and components. + Verify final systems for completeness and operation before final inspection and shipping. + Utilize test equipment like oscope, microscope, huntron, pinpoint, CCA and component troubleshooting devices, and volt/multimeter to locate and identify malfunctions. + Support the Quality System by following procedures, work order instructions, and documenting records to meet AS-9100 and AS-9110 regulations. **Why Work Here?** Enjoy working in a clean, temperature-controlled environment with a flexible start time. Benefit from compensation raises as you become a Subject Matter Expert. The company offers fully paid health benefits, a 401k with a match, opportunities for quarterly bonuses, and a pension plan. Join a peer-reviewed environment with a flat hierarchy, emphasizing a strong company culture. **Work Environment** Work in a clean, temperature-controlled facility primarily performing bench work. Collaborate with around 20 other technicians in an environment that adheres to AS-9100 standards. The role is FAA Safety Sensitive and requires a drug test. **Job Type & Location** This is a Contract to Hire position based out of Solon, OH. **Pay and Benefits** The pay range for this position is $28.00 - $35.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: - Medical, dental & vision - Critical Illness, Accident, and Hospital - 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available - Life Insurance (Voluntary Life & AD&D for the employee and dependents) - Short and long-term disability - Health Spending Account (HSA) - Transportation benefits - Employee Assistance Program - Time Off/Leave (PTO, Vacation or Sick Leave) **Workplace Type** This is a fully onsite position in Solon,OH. **Application Deadline** This position is anticipated to close on Feb 8, 2026. **About Aerotek:** We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry - from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies' construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Ergon Midstream, LLC, a subsidiary of Ergon, Inc., is a relationship-driven company that values each employee's willingness to learn and contribute to the team. We are family-owned with locations throughout the US, but we pride ourselves on maintaining a small-company feel. We are currently recruiting for an I&E Technician that can be based in either our Magnolia, Marietta or Zainesville, Ohio locations. The position will ensure the integrity and reliability of all electrical, instrumentation, and control systems within the assigned area. This will include terminals, truck unloading facilities, brine well pads. Additional this position must have a strong commitment to safety and environmental policies. I&E Technician Responsibilities: Responsible for installation, troubleshooting and repair of electrical power systems, instrumentation and control system equipment. Communicate at a technical level and interface with company personnel, including making recommendations for improvement, replacement, and additions of E&I equipment required for safe and continued operation Safely install, configure, test, calibrate, operate, troubleshoot, maintain, and inspect electrical, instrumentation and control system equipment Monitor pressure, flow, temperature controls, process limited controllers, and gas analysis equipment Use and understand the principles of operation of all meters and instruments used in applicable I&E work Work with drawings, sketches, specs, as-builts, and make new for proposed installations and completed projects Perform and document preventive maintenance inspections on electrical and control equipment Perform calibration, troubleshooting, and maintenance of sophisticated compliance analyzers, and has the capacity to make programming changes and additions Interpret schematics to troubleshoot problems and performs database maintenance administration Install and adjust measuring and control devices, signal transmitters, meters and signal pickups Practice awareness concerning issues of health, safety, and the environment; cooperate with emergency teams to anticipate and deal with any hazardous and/or unusual situations (oil spills and line leaks, inclement weather, etc) Utilize work order database for maintenance activity Review, approve and fill equipment requisitions I&E Technician Qualifications High School Diploma or GED, technical school a plus +5 years of comprehensive I&E experience Valid drivers license Proficient computer skills Knowledgeable in operating and maintaining equipment within oil and gas facilities Basic understanding of electrical concepts, test equipment, flow schematics and electrical and piping instrumentation and drawings Basic knowledge of PLC operations and logic Fluent English skills and excellent verbal/written communication skills Must pass pre-employment background and drug screen. Position is subject to random DOT drug testing Capable of lifting /carrying/pushing/pulling up to 50 lbs Capable of vigorous outdoor activities and have manual dexterity with physical ability to work extended hours, climbing, bending, kneeling, squatting, working with arms extended above the head, twisting upper body, standing long periods, walking catwalks, working in confined spaces, exposure to weather conditions, driving a vehicle, operation of forklifts and light industrial equipment Ability to be on call as needed and travel out of town as needed Capable of performing duties with minimal supervision Ergon offers a competitive benefits package: 401(k), Health, Life, Dental, Vision, Holidays, Vacation, Sick Leave, Tuition Assistance and Profit Sharing Ergon is an EEO/AAP Employer. Employment offer contingent upon pre-employment drug test, background check, and MVR.

Job Description Make an Impact with Us At Vallourec, we are seeking individuals whose passion and dedication match the strength and resilience of the steel we produce. As an Electronic Technician, you will provide, maintain, and troubleshoot programmed software to ensure a reliable and safe production environment. Your Role at a Glance Communicate effectively with the Electrical Supervisor (FQM) and peers. Troubleshoot electronic/electrical equipment and HMI-related issues. Maintain operational status of all electronic/electrical equipment. Program and/or troubleshoot Level 1 and Level 2 of the production line. Perform maintenance tasks on electronic/electrical equipment. Support and lead maintenance improvement activities (CIT, MADE, RCA, CAPEX). Evaluate new and replacement electronic/electrical hardware. Document work history accurately in SAP, including entering and closing work orders. Maintain flexibility and adaptability to changing business conditions and technologies. Lead by example and promote safety programs and activities. What Sets You Apart We're looking for individuals who bring the right mix of experience, mindset, and motivation: Ability to read and interpret safety rules, operating instructions, PLC language (Allen Bradley/Siemens), and procedure manuals. Strong knowledge of AC/DC motor theory and VFDs (Allen Bradley/Siemens/ABB). Skilled in AC/DC low-voltage control circuit troubleshooting. Solid mathematical and reasoning skills for problem-solving. Above-average electrical and mechanical comprehension. Associates degree in electronics or substantial progress toward completion preferred. Minimum 10+ years of industrial electrical/electronic maintenance experience. Proficient in PLC codes (AB and/or Siemens) and traceability systems. Strong working knowledge of SAP and Microsoft applications. What Powers Your Performance Success in this role is driven by a strong mix of personal ownership, collaboration, and continuous improvement. We value team members who: Communicate clearly and constructively Collaborate effectively and contribute to team success Adapt to change with a positive, proactive mindset Take accountability and show initiative in their work Demonstrate reliability and pride in performance Prioritize safety and act with awareness Embrace feedback and use it to grow Maintain high attention to detail Drive continuous improvement and challenge the status quo Support and develop others through shared learning How We Support Your Success We're committed to helping you thrive- on the job and beyond. That's why we offer a collaborative culture where your ideas drive real change, and career mobility within a stable, essential industry. To support your growth and well-being, we also provide a comprehensive and competitive benefits program, including: Medical, Dental, and Vision Coverage Company-Paid Life Insurance & Short/Long-Term Disability Profit Sharing: Up to 4% 401(k): Company match 4.5% with no vesting period Paid Parental Leave (including adoptions) Paid Holidays: 10 days + 1 floating holiday Paid Vacation Time Performance-Based Bonus Program Tuition Reimbursement Safety isn't negotiable, it's who we are. Every spark, every shift, and every decision is guided by a commitment that goes well beyond compliance. We don't cut corners; we set the standard. That means clear expectations, continuous training, and shared accountability at every level. Protecting our people is more than a priority, it's a promise we make to every colleague, every day.

KEY RESPONSIBILITIES: Responsible for thorough communication with Electrical Supervisor (FQM) and peers Troubleshoot all electronic/electrical equipment/HMI related problems Responsible for maintaining operational status of all electronic/electrical equipment Responsible for programming and/or troubleshooting of Level 1 and Level 2 of the production line Responsible for performing maintenance tasks of all electronic/electrical equipment Maintain positive posture in all safety programs and activities Participate and lead as required maintenance improvement activities (i.e., CIT, MADE, RCA and CAPEX) Evaluate new and replacement electronic/electrical hardware Accurately document work history in SAP up to and including entering and closing out work orders Must be flexible and show the ability to work within changing business conditions and technologies Must be able and possess the ability to lead by example Strong organizational, planning, interpersonal and communication skills while working collaboratively with others without line authority Demonstrate superior problem solving and decision making skills #LI-JB1 #LI-Onsite EXPERIENCE, SKILLS, AND KNOWLEDGE: Language skills: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, Programmable Logic Controller (PLC) language (Allen Bradley and/or Siemens PLC's) and procedure manuals AC/DC motor theory and VFD knowledge (Allen Bradley/Siemens and/or ABB) AC/DC Low voltage control circuit troubleshooting Mathematical skills: Ability to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions, and decimals Reasoning ability: Ability to apply common sense understanding to carry out instructions furnished in written, oral or diagram form Ability to deal with problems involving several concrete variables in standardized situations Above Average Electrical and Mechanical comprehension EDUCATION, TRAINING, AND CERTIFICATIONS: Associates degree in electronics or substantial work toward completion of electrical or electronic degree, preferred Must have knowledge of PLC codes (AB and/or Siemens) Must have knowledge of traceability including understanding of tracking zones, telegrams/messages, Level 1 and Level 2 routes Must have a minimum 10+ years' experience in industrial electrical/electronic maintenance Strong working knowledge of SAP Must be proficient in Microsoft Applications CRITICAL COMPETENCIES & CAPABILITIES: Directability Teamwork Adaptability Accountability Reliability/dependability Initiative Safety awareness Ability to receive and provide constructive feedback Pride in performance Continuous Improvement/Quality Communication Positive responses to change High attention to detail BENEFITS: Medical Dental Vision Company Paid Life Insurance & Short & Long-Term Disability Pay Profit Sharing: Up to 4% 401K: Company match of 4.5% without a vesting period Paid Parental Leave: For both birthing and non-birthing parents, and for adoptions Paid Holidays: 10 days Personal Floating Holiday: 1 day Paid Vacation Time Discretionary Performance-Based Bonus Program

For description, visit PDF: ************************ gov/Stark County Regional Planning - Engineering Technician - Job Statement. pdf

Responsibilities Studies specifications such as blue prints, sketches, models, or descriptions; and visualizes project to determine materials required. Determines assembly and sequence of operations. Examines and troubleshoots new or previously used ideas. Analyzes problem and recommends solutions. Develops specifications from general descriptions. Maintain, repair, and improve all plant equipment and facilities. Make adjustments to equipment in the production process to insure part quality and promote continuous improvement. Assists in making adjustments to equipment in the production process to insure part quality and promote continuous improvement. Qualifications Journeyman's card/certification and a minimum of 7 years experience in manufacturing or related field in the Electrical field. Possess a proficient understanding of all aspects of electrical maintenance. Ability to install new equipment, trouble shoot current processes. Must be proficiently versed in aspects of electrical maintenance to include 480volts 3 phase down to control wiring, able to program and trouble shoot various PLC'S, motor controls both AC / DC. Experience with manufacturing processes is required. Must be able to read and understand a blueprint. Ability to diagnose, interrupt and assess problems in manufacturing processes.Be able to created solutions to complex situations. Ability to add, subtract, multiply and divide in all units of measure. Must have a good understanding of equipment inspections and preventive maintenance. Must have been trained in Lockout / tagout; understanding of the national electrical code, and Arc Flash. Education Associates degree or equivalent from two-year college or technical school.

Altronic LLC is seeking an ElectronicTechnician to join our team in Girard, Ohio. This individual will test new electronic products per written work instructions, diagnose and troubleshoot new electronic printed circuit board assemblies (PCBAs) to the component level utilizing schematics and test lab equipment (DMM, Oscilloscope, etc). They will also assist in the design, development and implementation of new test equipment and procedures for new and existing products and provide input to the product test strategy and will write technical reports. This is a full-time position, scheduled weekdays. Overtime is required as necessary per the production requirements, for all the employees. Main Tasks: The main tasks for this role include the testing, diagnosing, and repair/troubleshooting of new electronic products. This will include the use of various testing equipment inclusive of hardware and software applications. Individual Tasks: Test new electronic products per written work instructions Circuit and Component Level Troubleshooting and Repair of electronic assemblies Develop/improve test procedures for new and existing electronic products Perform maintenance and calibration on custom test equipment Read and interpret complex electronic design schematics and PCB layouts. Training/Certifying of other technicians Coordinates testing of products, reports areas for improvement, and records technical information that will aid in future customer support with the product Perform validation testing on new product designs Conduct root cause analysis of failures and report results to Director of Quality Assist in the design, development and implementation of new test equipment and procedures for new and existing products and provide input to the product test strategy Able to communicate and interface with Quality Assurance, Engineering and manufacturing to resolve manufacturing issues in a professional manner Requirements: Associate's degree (or higher) in electronic engineering or related field; an Electronics Engineering Technology Degree is preferred 0-3 years electronic testing and troubleshooting experience Experienced with the use of test and measurement instrumentation including oscilloscopes, DMMs, thermocouple calibrators, etc. Strong working knowledge of electronics, digital logic and analog circuits and be able to apply this knowledge in testing, troubleshooting and repairing electronic assemblies and boards to the component level Reading and interpreting schematics and diagrams to help in troubleshooting and repair of electronic devices to component level Microsoft Office computer skills including knowledge of Word, Excel, and PowerPoint Must be able to work productively, safely, and independently without supervision Understanding and knowledge of IPC principals and standards (IPC-610, J-STD-001) Excellent time management skills Ability to interact effectively with all levels of the company including production, engineering and management personnel Must have excellent verbal and written communication skills Experience in documenting processes and procedures in an ISO-9001 environment Experience with SAP a plus Overtime as per company requirements Benefits: Start your Adventure! HOERBIGER offers a dynamic, continually changing work environment with opportunity for advancement. Our robust benefits package includes employee option to participate in Medical/Dental/Vision insurance, FSA & HSA. All employees are provided with paid Short- & Long-Term Disability coverage, Life Insurance, paid Vacation, paid Holidays, paid Sick Days, paid Parental Leave; Tuition Reimbursement and 401(k) Retirement Plan with matching contributions. Relocation is not available for this position. Company Information: Altronic has long been regarded as the world's leading manufacturer of ignition and control systems for industrial engines. These products represent the industry standard for quality. All are designed to improve engine performance and enhance reliability. Many also improve operating efficiency, helping to reduce emissions, which contributes to a healthier environment. Altronic is an Equal Opportunity Employer ● Drug Free Workplace ● E-verify

PTC is a leading manufacturer and marketer of welded and cold drawn mechanical steel tubing and tubular shapes, plated bar and tubing, and fabricated parts and precision components. We at PTC value our employees' health and wellness. We offer the following: FREE Healthcare HSA option Dental Vision Life Insurance Dependent & Spouse Life Insurance Long Term Disability Cancer & Critical accident coverage 401K plan with company match Referral Bonus Annual college scholarship available for children & grandchildren of PTC Alliance employees Tuition Reimbursement eligibility Job Summary: Responsible for the coordination of the NDT equipment. This includes ordering as needed & backup parts, coordinating repair & calibration with outside NDT vendors, troubleshooting, and any other duties to maintain a high level of NDT testing & production as required. Supports other regional PTC Alliance and/or Metal-Matic facilities as needed. Essential Duties and Responsibilities: Daily monitoring and auditing of Nondestructive test equipment, operators, and reported test data. Interface with vendors of NDT equipment to maintain calibration, troubleshoot, repair, update and modernize capability of equipment. Assists Mill UT operator to set up & verify ultrasonic equipment on the welding mills. Pursue and evaluate new equipment/technologies for NDT. Assist in installation and/or design of new test equipment. Responsible for repair and calibrations of Mill UT, equipment, inspection NDE equipment Train & qualify NDT operators when Level II certificate is obtained. Assists in gathering NDT data to support investigations on internal and external quality claims. Repairs and maintains laser OD gauges on straighteners. Maintain & troubleshoot Rea-Jet stencil systems & print heads. The incumbent is expected to understand that all employees have a shared responsibility for the quality of products and related services provided to our customers. Duties and responsibilities are to be carried out in accordance with the PTC Quality Management System and its policies, procedures, and work instructions as applicable to the job or function being performed. Skills and Abilities: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Language Skills: Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public. Mathematical Skills: Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations. Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry is considered a plus. Reasoning Ability: Ability to define problems, collects data, establishes facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables. Other Skills and Abilities: Must be computer literate and able to work with programs such as Word, Excel, etc., and be able to learn and use HP programs such as e-mail, established programs, etc. Qualifications Minimum Education and/or Experience Requirements: High school diploma or general education degree (GED). 5 - 7 years of related NDT experience. Certified Level II UT, ET is preferred but will consider qualified Level I operators. Obtaining a Level II NDT certificate will be a mandate for continual future employment. Experience in quality related functions is a plus but not necessary. Number of Direct Reports: None Job Titles of Direct Reports: None Certificates, Licenses, and Registrations: Must possess a valid driver's license for business travel, such as, visits to other PTC Alliance and Metal- Matic sites, customer visits, to attend required meeting, seminars, etc. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly exposed to risk of electrical shock. The employee is frequently exposed to moving mechanical parts. The employee is occasionally exposed to wet and/or humid conditions, fumes or airborne particles, toxic or caustic chemicals, and extreme heat. The noise level in the work environment is usually moderate. Frequently enters and works in manufacturing area of Plant where noise level is high. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit and use hands to finger, handle, or feel. The employee frequently is required to stand, walk, reach with hands and arms, and talk or hear. The employee is occasionally required to climb or balance and stoop, kneel, crouch, or crawl. The employee must occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus.

* Responsible for product design support for standard or custom power units * Will work under the direction of Electrical and\or Mechanical Engineers performing prototyping, troubleshooting or validation activities * Assists design engineers to prototype new product designs whether completely new designs or subassemblies * May assist in regulatory agency testing or preparation such as UL, CSA, TUV * May prototype concepts using available materials * Assists in debugging production problems * Creates manufacturing instructions Skills & Qualifications * 5+ years of experience with power or electromechanical products * Testing/troubleshooting experience * Previous electrical wiring experience * Ability to read blue prints/schematics Preferred * Two-year degree * Experience with low and medium voltage power systems * Proficiency in MS-Office desktop solutions is quired including Outlook, Word, Excel and PowerPoint Job Type & Location This is a Contract to Hire position based out of Valley View, OH. Pay and Benefits The pay range for this position is $32.00 - $37.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Valley View,OH. Application Deadline This position is anticipated to close on Jan 30, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options.

Job Description Responsible for product design support for standard or custom load banks. Will work under the direction of Electrical and or Mechanical Engineers performing prototyping, verification validation activities. DUTIES AND RESPONSIBILITIES: Essential Functions: May prototype concepts using available materials for quick go no-go decisions whether to proceed into detailed design. Assists design engineers to prototype new product designs whether completely new designs or significant revisions to load banks. May assist in regulatory agency testing or preparation such as UL, CSA, TUV or others as required. Assists in debugging production problems. May participate in cost reduction or alternate component initiatives by testing and evaluating proposed options. Performs other duties as assigned by either line manager or project engineer s. May travel occasionally to customer sites to understand product application or to resolve product support issues. MINIMUM QUALIFICATIONS: 5 plus years' experience with load banks, generators, electrical testing equipment or similar products in the electrical products space. EDUCATION, SKILLS AND EXPERIENCE: Education: Two-year degree preferred Experience with low and medium voltage power systems is preferred Experience with laboratory test equipment such as voltmeters, ammeters, thermocouples, oscilloscopes, etc. is required Skills Must be a fast learner, show initiative, be proactive, and have good decision-making skills. Candidate should be creative, energetic, and be able to work safely with minimal supervision . COMPUTER SKILLS: Proficiency in MS-Office desktop solutions is required including Outlook, Word, Excel and PowerPoint Must be able to use desktop applications such as Microsoft Excel to evaluate large date sets Basic understanding of computer networking would be beneficial

Candidate will have competent troubleshooting skills in PLC program troubleshooting, servo systems, industrial controls, motor controls and electric circuits. Thorough knowledge and/or experience in industrial automation networks, safety devices, robotics, vision systems and electrical/pneumatic/hydraulic systems. Basic understanding of CNC. Individual must be a motivated self-starter with the ability to work independently and/or in a cross-functional work team environment. Individual must possess strong analytical, problem solving, and troubleshooting abilities. Requirements Principal Area of Responsibility: The individual will be responsible for maintaining/troubleshooting any equipment and facility systems with an emphasis on controls including relay logic, PLCs and HMIs (Allen-Bradley), servo drives and motors, robotics, vision systems and electrical power distribution. This includes, but is not limited to, mechanical and hydraulic presses, furnaces, grinders, steel preparation and coating equipment, gear shapers, robotics, CNC machining centers, gear shapers, dust and fume collection equipment, transformers, switchgears, busbars, HVAC equipment, and fire suppression systems. Specific Duties: Strong mechanical troubleshooting experience with regards to maintaining, repairing processes and systems Ability to troubleshoot, maintain, repair/replace and test automation systems, components and networks. Strong knowledge of Alan Bradley and Siemens hardware/software. Ability to troubleshoot and modify existing equipment systems including controls (relay logic, PLC and HMI programs, servo drives, and motors), automation and robotics, electrical, mechanical power transmission, hydraulics, and pneumatics. Knowledge of multi-axis robots. Provide assistance to engineering and operations relating to process issues and/or improvements Consult with automation component suppliers to specify products for installation, and arrange for purchases of equipment, tooling, materials and/or parts Participate in, or lead continuous Improvement (CI) initiatives. Must be willing and able to travel occasionally as required (not typically a part of job function, for training purposes, Work Experience: Minimum 5 years of experience in a manufacturing environment with a strong working knowledge of machine controls, automation, electrical, mechanical power transmission, hydraulics, pneumatics, electrical power distribution systems, and building systems. Must possess strong communication skills, analytical abilities and the ability to multi-task.

At SPL, we're powered by purpose, precision, and forward momentum. We're searching for a motivated Gas Measurement Technician to join our Metrology Division in Malvern, OH. In this impact-driven role, you'll be responsible for installing, maintaining, and calibrating gas meters and associated mechanical and/or electronic systems. If you're team-oriented, proactive, and goal-driven, we want to hear from you. Why You'll Love This Role Own critical gas measurement work onshore and offshore - and see your career take you places; Work closely with important customers on a daily basis; Put your skills to the test in a hands-on role where safety, precision, and teamwork drive success; Grow with a team that invests in you, offering cross-training and development at every step. What You'll Do Install, configure, calibrate, and maintain primary and secondary gas measurement devices; Conduct multi-point verification, orifice plate inspection, and troubleshoot gas measurement systems; Maintain work schedules with customers and SPL, including communicating schedule changes promptly; Prepare and submit required documentation such as COC documentation, field service tickets, and calibration reports; Identify industry-related equipment and measurement terminology accurately; Transport hazardous and nonhazardous materials safely; Train and mentor new employees on primary tasks; Other duties as assigned. Requirements What Makes You a Great Fit High school diploma or equivalent; Applicable work experience may be considered in lieu of education; Technician level will be determined based on prior experience, with preference given to candidates who have experience in measurement and field operations; Proficiency in the use, monitoring, and repair of meters utilized to measure the flow of natural gas and crude oil products; Knowledge of AGA/GPA/API Measurement Guidelines and regulatory requirements (BLM, COGCC); Effective communication skills and the ability to work independently under limited supervision. The Perks of Being Part of Our Team Grow Your Future: 401(k) plan with company matching to boost your retirement savings; Health & Wellness Covered: Comprehensive dental, vision, and health insurance plans; Spend Smart, Live Well: Flexible HSA and FSA accounts to help manage healthcare costs; Safety Net On Us: Employer-paid short-term and long-term disability coverage; Celebrate & Recharge: Paid holidays and generous PTO to balance work and life; Extra Protection: Employer-paid voluntary life and AD&D insurance; Family First: Paid parental leave for both parents; Support When You Need It: Employee Assistance Program (EAP) for personal and professional help; Stay Connected: Cell phone allowance to cover business communication needs; Drive with Confidence: Company vehicle provided for work-related travel and field operations. Your Schedule and The Fine Print Full-time position following a varying work schedule of 8-16 hours per day; Ability to participate in on-call rotation schedule, including weekends and holidays as needed to support business priorities and deadlines; Ability to work in all weather conditions, including hot, cold, and/or inclement temperatures. Our Commitment to Diversity and Inclusion At SPL, we believe a diverse team is a strong team. We are proud to be an equal opportunity employer, committed to creating an inclusive environment where all employees can thrive. Employment decisions are based on qualifications, merit, and business needs, without regard to race, color, religion, sex, gender identity or expression, sexual orientation, national origin, age, disability, veteran status, or any other legally protected characteristic. We are also committed to providing reasonable accommodations to applicants and employees with disabilities or for sincerely held religious beliefs, in accordance with applicable laws. If you need assistance or an accommodation during the application process, please let us know. Visa Sponsorship At this time, SPL is not able to offer visa sponsorship for this position. We appreciate your interest and encourage you to explore other opportunities with us in the future.

Requirements Technical Degree or equivalent field experience. 5+ years experience with Rosemount products is preferred Familiarity with Rosemont and Micro Motion Familiarity with Foxboro, Endress&Hauser, Yokogawa, and other instrumentation Ability to use hand and power tools, including drills, saws, shovels, picks, wrenches, tube benders and tube cutters. Understand instrumentation and be able to read blueprints. Understand and be able to perform electrical work. 480V experience is preferred Ability to work with electrical conduit and fittings is a plus. Be proficient in MS Word, Excel and Outlook. Familiarity with TCP/IP, networking fundamentals, Modbus, RS232/485, and Hart communications Experience managing customer projects and working independently Current driver's license Proficient with MS Office suite Ability to work any overtime that is required to complete a particular assignment (occasional weekend work) Ability to travel out of town and work in the field when required. Core Competencies: WORK COLLABORATIVELY - Promote an inclusive and positive work environment that encourages collaboration and team building across all levels of the organization.? Work with others to resolve obstacles that may prevent the organization from achieving its mission. CUSTOMER FOCUS - Demonstrate the desire and knowledge to understand customer needs.? Provide personalized, professional, and courteous service, accurate information, continuous communication, and the ability to handle customer concerns in an appropriate manner. INTEGRITY - Behave ethically, act fairly, and take responsibility for accomplishing work goals. Additional Details: We provide our team with everything needed for success, including world-class products, company vehicle for work/personal use, excellent continuous training, and all necessary work equipment. We reward hard work and success with a competitive base salary and benefits package, as well as a retirement savings program, which includes 401(k) with company match and profit sharing. Salary is based on experience. EEO/AA/M/F/Veteran/Disability

Equipment & Controls, Inc. is a successful and innovative Emerson Impact Partner. ECI provides an entrepreneurial opportunity for each employee to achieve our common mission of Delivering Successful Customer Outcomes 100% of the Time . Our customer base includes?oil and gas, chemical, power, food and beverage, mining and metals, life sciences, pulp and paper, refining, petrochemical, OEM and nuclear industries. With offices in Pennsylvania, West Virginia, and Ohio, ECI is the region's leader in process control and industrial automation products and solutions. We seek individuals that share our passion for excellence. Business Unit/Department: Reliability Solutions Group Location: Solon, Lima, or Columbus, Ohio Essential Duties and Responsibilities: Support customers in process control instrumentation and equipment startup with focus on flow measurement equipment Verify, troubleshoot and resolve instrumentation and equipment communications Inspect instrument wiring, power and grounding of installation Set up instruments with Hart 475 field communicator Work with onsite installation crew Replace/install instrumentation and equipment Troubleshoot failed instruments and equipment Develop solutions to resolve instrumentation and equipment problems Calibration of measurement and flow transmitters Providing clear and effective documentation of services provided to customers Requirements Technical Degree or equivalent field experience. 5+ years experience with Rosemount products is preferred Familiarity with Rosemont and Micro Motion Familiarity with Foxboro, Endress&Hauser, Yokogawa, and other instrumentation Ability to use hand and power tools, including drills, saws, shovels, picks, wrenches, tube benders and tube cutters. Understand instrumentation and be able to read blueprints. Understand and be able to perform electrical work. 480V experience is preferred Ability to work with electrical conduit and fittings is a plus. Be proficient in MS Word, Excel and Outlook. Familiarity with TCP/IP, networking fundamentals, Modbus, RS232/485, and Hart communications Experience managing customer projects and working independently Current driver's license Proficient with MS Office suite Ability to work any overtime that is required to complete a particular assignment (occasional weekend work) Ability to travel out of town and work in the field when required. Core Competencies: WORK COLLABORATIVELY - Promote an inclusive and positive work environment that encourages collaboration and team building across all levels of the organization.? Work with others to resolve obstacles that may prevent the organization from achieving its mission. CUSTOMER FOCUS - Demonstrate the desire and knowledge to understand customer needs.? Provide personalized, professional, and courteous service, accurate information, continuous communication, and the ability to handle customer concerns in an appropriate manner. INTEGRITY - Behave ethically, act fairly, and take responsibility for accomplishing work goals. Additional Details: We provide our team with everything needed for success, including world-class products, company vehicle for work/personal use, excellent continuous training, and all necessary work equipment. We reward hard work and success with a competitive base salary and benefits package, as well as a retirement savings program, which includes 401(k) with company match and profit sharing. Salary is based on experience. EEO/AA/M/F/Veteran/Disability

Job Summary/Purpose: * Responsible for the processes relating to electronic systems, instrumentation, PLC's, and the repair, maintenance and installation of electronic equipment and systems. * Starting rate - $41.93/hr 2nd shift, M-F 1:30pm - 10:00pm Essential Responsibilities * Participate/support the KHMS process and assist in the development of the system and operational standards and corrective actions. * Assist in installations of electronic devices throughout the production processes and factory, ensuring conformance to specifications. Problem solving efforts concerning electronic, PLC's, and instrumentation equipment to minimize failures and downtime. * Provide assistance to engineering concerning the design and installation of new systems. * Provides for the proper communication and interface between the factory installations, vendors, and factory IS systems as applicable, utilizing software, servers, modems, etc. * Responsible for Computerized Maintenance Management and activity scheduling for Production Maintenance. * Responsible for developing and recommending improvements to equipment, methods, layout, and procedures pertaining to department operations. Reduce chronic problems and optimize performance of existing systems through analysis and implementation of solutions. * Responsible for keeping costs at a minimum for efficient operation, proper care and economical use of materials. Identify cost reduction improvement opportunities through accurate machine repair history and downtime records. * Ensure that all work complies with OSHA, the National Electrical Code, and that all work is completed in safe manner and displays good quality workmanship. * Training and Safety - Provide a safe and healthful work environment for all personnel through consistent support of the company's Heinz Safety Process. Support safety processes including, but not limited to, hazard identification and elimination, area inspection, job skills, and compliance and safety training/meetings. * Follows all policies and safety regulations. * As necessary, other duties and/or projects may be assigned. Education and Experience * Two-year certificate from college or technical school; or two to four years related experience and/or training; or equivalent combination of education and experience.. Skills, Knowledge and Abilities * Working knowledge of personal computers, PLC's and local IS systems. Particularly Alan Bradley Micro Logic, Slick 500, 5000 Platform as well as Data Highway 485+ and Ethernet. * Ability to multitask and work in a team oriented fast-paced environment. * Excellent interpersonal, organizational, presentation and facilitation skills. * Willingness to grow with the organization. * Must have the ability to exercise considerable judgment and strategic planning. * Incumbent must have excellent written and verbal communication skills to deal with both internal and external customers. * Incumbent must have excellent planning/organization and interpersonal skills. * Ability to identify and solve problems. * Must be able to work flexible hours; days, afternoons, midnights, and weekend work. * Infrequent travel requirements. * Detail and process oriented. Physical/Mental Requirements * Ability to stand, walk, sit, climb, balance, stoop, kneel, crouch and crawl. * Ability to use hands/arms to reach, handle, or feel objects, tools or controls. * Ability to work in all areas of the facility including hot and cold areas, and be exposed to wet and humid conditions. * Must be able to lift and or move up to 50 lbs or more. * Must have excellent vision, distant and peripheral, with the ability to identify and distinguish colors, and adjust focus. * The noise level in the work environment is usually high, and ear protection is required. * Work near moving mechanical parts, high and/or confining places and in outside weather conditions. Benefits: Coverage for employees (and their eligible dependents) through affordable access to healthcare, protection, and saving for the future, we offer plans tailored to meet you and your family's needs. Coverage for benefits will be in accordance with the terms and conditions of the applicable plans and associated governing plan documents. Wellbeing: We offer events, resources, and learning opportunities that inspire a physical, social, emotional, and financial well-being lifestyle for our employees and their families. You'll be able to participate in a variety of benefits and wellbeing programs that may vary by role, country, region, union status, and other employment status factors, for example: * Physical - Medical, Prescription Drug, Dental, Vision, Screenings/Assessments * Social - Paid Time Off, Company Holidays, Leave of Absence, Recognition, Training * Emotional - Employee Assistance Program , Wellbeing Programs, Family Support Programs * Financial - 401k, Life, Accidental Death & Dismemberment, Disability Location(s) Massillon - Hourly Kraft Heinz is an Equal Opportunity Employer that prohibits discrimination or harassment of any type. All qualified applicants are considered for employment without regard to race, color, national origin, age, sex, sexual orientation, gender, gender identity or expression, disability status, protected veteran status, or any other characteristic protected by law. Applicants who require an accommodation to participate in the job application or hiring process should contact ***********************.

Job Description Ergon Midstream, LLC, a subsidiary of Ergon, Inc., is a relationship-driven company that values each employee's willingness to learn and contribute to the team. We are family-owned with locations throughout the US, but we pride ourselves on maintaining a small-company feel. We are currently recruiting for an I&E Technician that can be based in either our Magnolia, Marietta or Zainesville, Ohio locations. The position will ensure the integrity and reliability of all electrical, instrumentation, and control systems within the assigned area. This will include terminals, truck unloading facilities, brine well pads. Additional this position must have a strong commitment to safety and environmental policies. I&E Technician Responsibilities: Responsible for installation, troubleshooting and repair of electrical power systems, instrumentation and control system equipment. Communicate at a technical level and interface with company personnel, including making recommendations for improvement, replacement, and additions of E&I equipment required for safe and continued operation Safely install, configure, test, calibrate, operate, troubleshoot, maintain, and inspect electrical, instrumentation and control system equipment Monitor pressure, flow, temperature controls, process limited controllers, and gas analysis equipment Use and understand the principles of operation of all meters and instruments used in applicable I&E work Work with drawings, sketches, specs, as-builts, and make new for proposed installations and completed projects Perform and document preventive maintenance inspections on electrical and control equipment Perform calibration, troubleshooting, and maintenance of sophisticated compliance analyzers, and has the capacity to make programming changes and additions Interpret schematics to troubleshoot problems and performs database maintenance administration Install and adjust measuring and control devices, signal transmitters, meters and signal pickups Practice awareness concerning issues of health, safety, and the environment; cooperate with emergency teams to anticipate and deal with any hazardous and/or unusual situations (oil spills and line leaks, inclement weather, etc) Utilize work order database for maintenance activity Review, approve and fill equipment requisitions I&E Technician Qualifications High School Diploma or GED, technical school a plus +5 years of comprehensive I&E experience Valid drivers license Proficient computer skills Knowledgeable in operating and maintaining equipment within oil and gas facilities Basic understanding of electrical concepts, test equipment, flow schematics and electrical and piping instrumentation and drawings Basic knowledge of PLC operations and logic Fluent English skills and excellent verbal/written communication skills Must pass pre-employment background and drug screen. Position is subject to random DOT drug testing Capable of lifting /carrying/pushing/pulling up to 50 lbs Capable of vigorous outdoor activities and have manual dexterity with physical ability to work extended hours, climbing, bending, kneeling, squatting, working with arms extended above the head, twisting upper body, standing long periods, walking catwalks, working in confined spaces, exposure to weather conditions, driving a vehicle, operation of forklifts and light industrial equipment Ability to be on call as needed and travel out of town as needed Capable of performing duties with minimal supervision Ergon offers a competitive benefits package: 401(k), Health, Life, Dental, Vision, Holidays, Vacation, Sick Leave, Tuition Assistance and Profit Sharing Ergon is an EEO/AAP Employer. Employment offer contingent upon pre-employment drug test, background check, and MVR. Job Posted by ApplicantPro

Make an Impact with Us At Vallourec, we are seeking individuals whose passion and dedication match the strength and resilience of the steel we produce. As an Electronic Technician, you will provide, maintain, and troubleshoot programmed software to ensure a reliable and safe production environment. Your Role at a Glance Communicate effectively with the Electrical Supervisor (FQM) and peers. Troubleshoot electronic/electrical equipment and HMI-related issues. Maintain operational status of all electronic/electrical equipment. Program and/or troubleshoot Level 1 and Level 2 of the production line. Perform maintenance tasks on electronic/electrical equipment. Support and lead maintenance improvement activities (CIT, MADE, RCA, CAPEX). Evaluate new and replacement electronic/electrical hardware. Document work history accurately in SAP, including entering and closing work orders. Maintain flexibility and adaptability to changing business conditions and technologies. Lead by example and promote safety programs and activities. What Sets You Apart We're looking for individuals who bring the right mix of experience, mindset, and motivation: Ability to read and interpret safety rules, operating instructions, PLC language (Allen Bradley/Siemens), and procedure manuals. Strong knowledge of AC/DC motor theory and VFDs (Allen Bradley/Siemens/ABB). Skilled in AC/DC low-voltage control circuit troubleshooting. Solid mathematical and reasoning skills for problem-solving. Above-average electrical and mechanical comprehension. Associates degree in electronics or substantial progress toward completion preferred. Minimum 10+ years of industrial electrical/electronic maintenance experience. Proficient in PLC codes (AB and/or Siemens) and traceability systems. Strong working knowledge of SAP and Microsoft applications. What Powers Your Performance Success in this role is driven by a strong mix of personal ownership, collaboration, and continuous improvement. We value team members who: Communicate clearly and constructively Collaborate effectively and contribute to team success Adapt to change with a positive, proactive mindset Take accountability and show initiative in their work Demonstrate reliability and pride in performance Prioritize safety and act with awareness Embrace feedback and use it to grow Maintain high attention to detail Drive continuous improvement and challenge the status quo Support and develop others through shared learning How We Support Your Success We're committed to helping you thrive- on the job and beyond. That's why we offer a collaborative culture where your ideas drive real change, and career mobility within a stable, essential industry. To support your growth and well-being, we also provide a comprehensive and competitive benefits program, including: Medical, Dental, and Vision Coverage Company-Paid Life Insurance & Short/Long-Term Disability Profit Sharing: Up to 4% 401(k): Company match 4.5% with no vesting period Paid Parental Leave (including adoptions) Paid Holidays: 10 days + 1 floating holiday Paid Vacation Time Performance-Based Bonus Program Tuition Reimbursement Safety isn't negotiable, it's who we are. Every spark, every shift, and every decision is guided by a commitment that goes well beyond compliance. We don't cut corners; we set the standard. That means clear expectations, continuous training, and shared accountability at every level. Protecting our people is more than a priority, it's a promise we make to every colleague, every day.

Job Description KEY RESPONSIBILITIES: Responsible for thorough communication with Electrical Supervisor (FQM) and peers Troubleshoot all electronic/electrical equipment/HMI related problems Responsible for maintaining operational status of all electronic/electrical equipment Responsible for programming and/or troubleshooting of Level 1 and Level 2 of the production line Responsible for performing maintenance tasks of all electronic/electrical equipment Maintain positive posture in all safety programs and activities Participate and lead as required maintenance improvement activities (i.e., CIT, MADE, RCA and CAPEX) Evaluate new and replacement electronic/electrical hardware Accurately document work history in SAP up to and including entering and closing out work orders Must be flexible and show the ability to work within changing business conditions and technologies Must be able and possess the ability to lead by example Strong organizational, planning, interpersonal and communication skills while working collaboratively with others without line authority Demonstrate superior problem solving and decision making skills #LI-JB1 #LI-Onsite EXPERIENCE, SKILLS, AND KNOWLEDGE: Language skills: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, Programmable Logic Controller (PLC) language (Allen Bradley and/or Siemens PLC's) and procedure manuals AC/DC motor theory and VFD knowledge (Allen Bradley/Siemens and/or ABB) AC/DC Low voltage control circuit troubleshooting Mathematical skills: Ability to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions, and decimals Reasoning ability: Ability to apply common sense understanding to carry out instructions furnished in written, oral or diagram form Ability to deal with problems involving several concrete variables in standardized situations Above Average Electrical and Mechanical comprehension EDUCATION, TRAINING, AND CERTIFICATIONS: Associates degree in electronics or substantial work toward completion of electrical or electronic degree, preferred Must have knowledge of PLC codes (AB and/or Siemens) Must have knowledge of traceability including understanding of tracking zones, telegrams/messages, Level 1 and Level 2 routes Must have a minimum 10+ years' experience in industrial electrical/electronic maintenance Strong working knowledge of SAP Must be proficient in Microsoft Applications CRITICAL COMPETENCIES & CAPABILITIES: Directability Teamwork Adaptability Accountability Reliability/dependability Initiative Safety awareness Ability to receive and provide constructive feedback Pride in performance Continuous Improvement/Quality Communication Positive responses to change High attention to detail BENEFITS: Medical Dental Vision Company Paid Life Insurance & Short & Long-Term Disability Pay Profit Sharing: Up to 4% 401K: Company match of 4.5% without a vesting period Paid Parental Leave: For both birthing and non-birthing parents, and for adoptions Paid Holidays: 10 days Personal Floating Holiday: 1 day Paid Vacation Time Discretionary Performance-Based Bonus Program