Engineer jobs in Lealman, FL - 654 jobs

Designs manufacturing processes, procedures and production layouts for CCA and module assemblies. Cable harness experience and process writing are a plus. Interprets engineering prints to design processes and works with design engineering to implement production improvements. Supports the production floor by working with the operations team and focusing on continuous improvement. Designs, procures, and implements tooling to support manufacturing processes. May incorporate inspection and test requirements into the production plan. Inspects performance of machinery, equipment, and tools to verify their efficiency, and investigates and initiates corrective action of problems and deficiencies to ensure product quality. Provides guidance to engineering regarding design concepts and specification requirements to best utilize equipment and manufacturing techniques. Ensures processes and procedures are in compliance with regulations and specifications. Supports the production floor by working with the operations team. Designs manufacturing processes and production layout for circuit card assemblies and subassemblies. Understands how the circuit card process works. Cable harness experience is a plus.

About the Role We're looking for someone who genuinely loves building AI systems. Things like bots, knowledge bases, agentic workflows, RAG pipelines, and other intelligent tools. If you get excited about taking an idea and turning it into a real, working AI feature, you'll fit right in. The title mentions “Full Stack,” but to be clear: the heart of this job is AI engineering. You'll be the one designing and building the AI capabilities that power our platform, end to end. What You'll Work On (Primary Focus) AI Systems Development - You will architect, build, and deploy advanced AI capabilities, including: AI-powered bots and conversational assistants Knowledge base systems (RAG, embeddings, vector DBs, context management) Agentic systems with tool use, multi-step reasoning, and dynamic workflows Fine-grained prompt design, guardrails, and output evaluation Model selection, performance tuning, and cost optimization Integrating AI features into our existing MERN-based product If your passion is building real AI systems, not just prototypes, this role is built for you. Requirements AI Engineering Expertise (Required) - Candidates must have hands-on, production-level AI experience: Built production AI systems (bots, RAG, agents, orchestrations) Experience with GPT-4o, Claude, LangChain, LlamaIndex, Agent frameworks Deep understanding of embeddings + vector databases Experience designing RAG pipelines and context architectures Ability to build multi-step agentic workflows and tool systems Strong prompt engineering fundamentals + prompt security awareness Experience evaluating model performance + improving reliability Comfort with AI dev tooling (Cursor, Claude, Copilot, etc.) Full Stack Ability (Supporting Skillset) (Not the primary responsibility, but required for integrating AI features.) Experience with MongoDB, Express, React, Node.js Strong debugging and integration skills Bonus Skills AWS experience Workflow engines (n8n, Zapier) Experience with fine-tuning or model benchmarking How to Apply (Must Follow Exactly) Applicants who skip any step will be automatically declined. 1. Property Management / Real Estate Experience (Optional) List any relevant experience (optional). 2. GitHub Repository Share your GitHub link or specific repos showcasing your AI + full stack work. 3. 2-Minute Video Introduction (Required) Record a 1-2 minute video (Loom, unlisted YouTube, Google Drive, etc.) answering: Your name + where you're located Your AI experience in one sentence One AI system you built that you're proud of Clear audio is enough - no heavy editing required. (If this keyword is not at the top, the application will not be reviewed.)

Manufacturing Process Engineer - Electronics / CCA Production Clearance Requirements: None Contract to Hire Pay Rate:$35/hr We are seeking a hands-on Manufacturing Process Engineer to support the design, optimization, and continuous improvement of manufacturing processes for circuit card assemblies (CCA), electronic module builds, and cable harness production. This role involves collaborating with engineering, operations, quality, and production teams to enhance manufacturability, improve workflow efficiency, develop tooling, and ensure compliance with specifications and regulations. The ideal candidate understands electronic manufacturing processes, can interpret engineering drawings, and has experience designing production layouts or writing process documentation. This is an excellent opportunity for a technical professional who enjoys supporting the production floor, driving improvements, and delivering high?quality manufacturing solutions. Responsibilities: Design and improve manufacturing processes, procedures, and production layouts for CCAs, electronic modules, and subassemblies. Review and interpret engineering prints to develop accurate and efficient manufacturing processes. Collaborate with design engineering to drive production improvements and optimize manufacturability. Support day?to?day production floor activities in partnership with operations and quality teams. Design, procure, and implement tooling, fixtures, and manufacturing aids to support efficient assembly processes. Incorporate inspection and test requirements into production plans where applicable. Monitor performance of machinery, equipment, and tools; investigate deficiencies and recommend corrective actions. Ensure compliance with manufacturing standards, specifications, and regulatory requirements. Provide feedback to engineering regarding design concepts and specification improvements. Drive continuous improvement initiatives focusing on quality, throughput, and process efficiency. Perform physical tasks including climbing stairs and lifting up to 20 lbs. Shift Schedule: Monday - Thursday, 5:00 AM to 3:30 PM EST Required Skills/Education: Experience designing or improving manufacturing processes for circuit card assemblies (CCA) or electronic modules. Ability to read, interpret, and apply engineering drawings, schematics, and technical documentation. Hands-on experience supporting production floor operations and resolving process issues. Ability to design or modify tooling, fixtures, and assembly processes. Strong understanding of manufacturing standards, quality requirements, and compliance processes. Ability to read/write in English. Ability to climb stairs and lift up to 20 lbs. Preferred Skills: Cable harness experience (routing, assembly, documentation). Experience writing or updating manufacturing process documentation. Familiarity with CCA assembly processes including soldering, inspection, reflow, or AOI. Experience working in electronics manufacturing or defense/aerospace environments. Strong continuous improvement mindset with the ability to identify process gaps and drive solutions. About Seneca Resources At Seneca Resources, we are more than just a staffing and consulting firm-we are a trusted career partner. With offices across the U.S. and clients ranging from Fortune 500 enterprises to government organizations, we connect talented professionals with meaningful work that drives impact. When you work with Seneca, you're choosing a company that invests in your success, celebrates your achievements, and provides opportunities aligned with your career goals. Our consultants and contractors enjoy competitive pay, comprehensive health, dental, and vision coverage, 401(k) plans, and continuous support from a dedicated team committed to your professional growth. Seneca Resources is proud to be an Equal Opportunity Employer, fostering a diverse and inclusive workplace where all qualified individuals are encouraged to apply.

This is a U.S. based position. All of the programs we support require U.S. citizenship to be eligible for employment. All work must be conducted within the continental U.S. Who we are: Raft () is a customer-obsessed non-traditional small business with a purposeful focus on Distributed Data Systems, Platforms at Scale, and Complex Application Development, with headquarters in McLean, VA. Our range of clients includes innovative federal and public agencies leveraging design thinking, cutting-edge tech stack, and cloud-native ecosystem. We build digital solutions that impact the lives of millions of Americans. About the role: As an ML Ops Engineer, you will collaborate with a cross-functional data team comprising AI/ML Engineers, DevSecOps engineers, Product Owners, Data Engineers, Data Analysts, and Data Scientists. Your primary responsibility will be to design, build, and maintain the infrastructure and pipelines that enable Machine Learning model training, deployment, and scaling. You will manage distributed workloads across GPU-enabled Kubernetes clusters and ensure efficient resource orchestration between training and inference operations. What we are looking for: 3+ years of relevant hands-on experience Experience building and maintaining machine learning pipelines Strong Python skills for defining and maintaining ML pipelines Practical experience with PyTorch (TensorFlow experience acceptable) Airflow for job orchestration, particularly managing resources between training and inference workloads Strong Kubernetes experience including managing local clusters, running different flavors, and managing custom resource definitions Istio networking experience in Kubernetes environments Experience working with MinIO object storage Must have hands-on experience running GPU workloads on Kubernetes Fast learner, analytical thinker, creative, hands-on, strong communication skills Able to work both independently and as part of a team Excellent problem-solving skills and attention to detail Highly preferred: CENTCOM or DoD experience Experience with time slicing GPUs on Kubernetes\ Exposure to computer vision and/or large imagery formats such as NITF Publications or GitHub repos showcasing your skills Experience with Docker and container orchestration best practices Clearance Requirements: Active TS with ability to obtain and maintain SCI Work Type: Onsite in Tampa, Florida May require up to 15% travel Salary Range: $150,000 to 220,000 The determination of compensation is predicated upon a candidate's comprehensive experience, demonstrated skill, and proven abilities What we will offer you: Highly competitive salary Fully covered healthcare, dental, and vision coverage 401(k) and company match Take as you need PTO + 11 paid holidays Education & training benefits Generous Referral Bonuses And More! Our Vision Statement: We bridge the gap between humans and data through radical transparency and our obsession withthemission. Our Customer Obsession: We will approach every deliverable like it's a product. We will adopt a customer-obsessed mentality. As we grow, and our footprint becomes larger, teams and employees will treat each other not only as teammates but customers. We must live the customer-obsessed mindset, always. This will help us scale and it will translate to the interactions that our Rafters have with their clients and other product teams that they integrate with. Our culture will enable our success and set us apart from other companies. How do we get there? Public-sector modernization is critical for us to live in a better world. We, at Raft, want to innovate and solve complex problems. And, if we are successful, our generation and the ones that follow us will live in a delightful, efficient, and accessible world where out-of-box thinking,and collaboration is a norm. Raft's core philosophy is Ubuntu: IAm, BecauseWe are. We support our "nadi" by elevating the other Rafters. We work as a hyper collaborative team where each team member brings a unique perspective, adding value that did not exist before. People make Raft special. We celebrate each other and our cognitive and cultural diversity. We are devoted to our practice of innovation and collaboration. We're an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status.

RELOCATION ASSISTANCE: No relocation assistance available CLEARANCE TYPE: SCITRAVEL: Yes, 10% of the TimeDescriptionAt Northrop Grumman, our employees have incredible opportunities to work on revolutionary systems that impact people's lives around the world today, and for generations to come. Our pioneering and inventive spirit has enabled us to be at the forefront of many technological advancements in our nation's history - from the first flight across the Atlantic Ocean, to stealth bombers, to landing on the moon. We look for people who have bold new ideas, courage and a pioneering spirit to join forces to invent the future, and have fun along the way. Our culture thrives on intellectual curiosity, cognitive diversity and bringing your whole self to work - and we have an insatiable drive to do what others think is impossible. Our employees are not only part of history, they're making history. Join Northrop Grumman - Tampa, FL, part of Mission Systems sector, focused on the development of new capabilities for our military and intelligence customers around the globe. At the heart of Defining Possible is our commitment to missions. In rapidly changing global security environments, Northrop Grumman brings informed insights and software-secure technology to enable strategic planning. We're looking for innovators who can help us keep building on our wide portfolio of secure, affordable, integrated, and multi-domain systems and technologies that fuel those missions. By joining in our shared mission, we'll support yours of expanding your personal network and developing skills, whether you are new to the field, or an industry thought leader. At Northrop Grumman, you'll have the resources, support, and team to do some of the best work of your career. We are seeking cleared, experienced Cyber Systems Engineers to work on-site at our Tampa, FL location. Note: Due to the classified nature of the work being performed, this position does not offer any virtual or telecommute working options. Applicants are encouraged to apply, only if they are willing to work on-site. What You'll get to Do Essential Duties: Engineer enterprise solutions that align with best practices to support mission critical objectives. Participate in regular project design and incremental status meetings. Collaborate with different teams across the program to discuss, analyze or resolve usability issues and work on projects. Work on 1-3 mid- to large-scale projects concurrently, assigned from program and internal leadership. Provide effective communication across multi-functional teams, stakeholders and end users. Solve complex problems and mentor junior personnel. Automate engineering tasks utilizing scripting and/or orchestration tools. Conduct product research and selection on COTS technologies to integrate or upgrade with current IT infrastructure based on program driven requirements. Work with on-premise environments. Work with NetApp or similar products. Maintain backup and recovery solutions, storage provisioning, storage management, and implement data protections. Provide Data Analysis, preliminary design, and cost estimates. Design, implement, and/or configure Windows enterprise architectures to include Active Directory, DHCP, GPOs, DNS, LDAP, BitLocker, MS Exchange, MECM (Microsoft Endpoint Configuration Manager), MS SQL, WSUS, Windows operating system and Windows Server environments. Work with Cisco and/or VMware NSX devices and technologies leveraging knowledge of routing protocols, employment of distributed logical routers and firewalls, and network micro-segmentation. Create illustrated network design and configuration diagrams in Visio for small to large networks. Design, implement, and/or configure Linux Environments to include RHEL operating systems, Red Hat Satellite Server, Capsule Servers, System Build Automation and Ansible Automation Platform. Engineer virtualized environments using technologies such as vSphere, ESXi, storage provisioning, containers, and software defined networking. Employ security hardening, granular role-based access, and automation of repeated tasks. Basic Qualifications: Master's Degree with 0 years of experience; or a Bachelor's Degree with 2 years of experience; or an Associate's Degree with 4 years of experience; or a High School Diploma (or equivalent) with 6 years of IT experience is required. US Citizenship is required. Active Top Secret / SCI security clearance is required to be considered. Must possess a current DoD 8570 Certification for IAT Level II or higher prior to start date (example: Security+ CE) Experience with designing, deploying, managing, implementing, and upgrading virtualized environments and their components Preferred Qualifications: Operational experience and in-depth knowledge of Atlassian Products (Jira, Confluence, Bitbucket, Bamboo) Operational experience and in-depth knowledge of Virtual Desktop Environment technologies such as Horizon, Dell Wyse Management and Teradici. Operational experience and in-depth knowledge of monitoring tools such as ELK, SolarWinds, and VMware Aria. Functional knowledge of backup applications such as VEEAM and the ability to understand and implement backup and recovery solutions. Proficiency in one or more of the following languages: PowerShell, Python, Bash, or YAML (executed/managed via Ansible). Primary Level Salary Range: $85,000.00 - $127,400.00The above salary range represents a general guideline; however, Northrop Grumman considers a number of factors when determining base salary offers such as the scope and responsibilities of the position and the candidate's experience, education, skills and current market conditions.Depending on the position, employees may be eligible for overtime, shift differential, and a discretionary bonus in addition to base pay. Annual bonuses are designed to reward individual contributions as well as allow employees to share in company results. Employees in Vice President or Director positions may be eligible for Long Term Incentives. In addition, Northrop Grumman provides a variety of benefits including health insurance coverage, life and disability insurance, savings plan, Company paid holidays and paid time off (PTO) for vacation and/or personal business.The application period for the job is estimated to be 20 days from the job posting date. However, this timeline may be shortened or extended depending on business needs and the availability of qualified candidates.Northrop Grumman is an Equal Opportunity Employer, making decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected class. For our complete EEO and pay transparency statement, please visit *********************************** U.S. Citizenship is required for all positions with a government clearance and certain other restricted positions.

**_About_** **_this_** **_Position_** At Henkel, you'll be part of an organization that's shaping the future through innovation, sustainability and collaboration. With our trusted brands like Persil , 'all , Loctite , Snuggle , and Schwarzkopf and our cutting-edge technologies, you'll have countless opportunities to explore new paths and grow. This position is with our Adhesive Technologies business unit - where we empower our people to transform industries and provide our customers with a competitive advantage through adhesives, sealants and functional coatings. **Dare to learn new skills, advance in your career and make an impact at Henkel.** **What you´ll do** + You provide expert technical guidance to clients, understanding their needs and recommending solutions primarily for fenestrations, sidewall, and roofing applications. + You support customers with lab-based and customer-facing projects, including performance validation, data generation, and designing test methods for new applications. + You work with cross-functional colleagues in sales, product development, marketing, and others to solve technical issues for our customers. + You conduct thorough product testing and evaluations, ensuring that solutions meet quality standards and client specifications. + You inform our customers on the performance capabilities of Henkel's products and services via technical help, reports, and presentations. + You create and maintain detailed technical documentation, including manuals and guidelines for product installation and usage. + You provide technical help to clients, addressing and resolving issues related to product implementation, functionality, or performance. + You provide expert training programs to our sales and distribution partners and to ensure new products and applications are selected and used whenever appropriate. + Review plan details and specifications for related projects with architects, general contractors, installers and other project managers. Provide appropriate Henkel product installation guidelines and guidance. + Work with field sales to oversee project management protocol. + Field technical calls regarding Henkel products and or system applications for envelop design, building codes, product performance, and building science related inquiries. + Maintain and deliver Henkel's training courses (including AIA LUs and the OSI Certified programs) to architects, trade and manufacturing partners, and installers at Henkel facilities and or offsite locations. + Attend building science, building code and various industry association related conferences and seminars. + Represent Henkel on various steering committees at chosen industry associations. + Communicate relevant industry and competitive news to management. **What makes you a good fit** + Education - Bachelor's degree required, Architecture or Structural Engineering (preferred) + Experience - 7-9 years of architectural/structural performance and design with focus on residential roof systems (preferred) + Travel requirements - 40%-50% **Special skills ** + Experience training and educating small to large groups + Proficiency with AutoCAD, Microsoft Word, Excel, PowerPoint, Outlook + Communication, Management, Decision-Making Skills + In-depth knowledge of relevant technologies, applications, and products. + Ability to build relationships with professionals of all organizational levels. + Excellent verbal and written communication skills to convey technical information clearly to diverse audiences. + Analytical and problem-solving skills to identify and address technical issues effectively. + Customer-centric approach with the ability to understand and meet client needs. **Some benefits of joining Henkel** + **Health Insurance:** affordable plans for medical, dental, vision and wellbeing starting on day 1 + **Work-Life Balance:** Paid time off including sick, vacation, holiday and volunteer time, flexible & hybrid work policies (depending on role), and vacation buy / sell program + **Financial:** 401k matching, employee share plan with voluntary investment and Henkel matching shares, annual performance bonus, service awards and student loan reimbursement + **Family Support:** 12-week gender neutral parental leave (up to 20 weeks for parents giving birth), fertility support, adoption & surrogacy reimbursement, discounted child and elderly care, and scholarships + **Career Growth:** diverse national and international growth opportunities, access to thousands of skills development courses, and tuition reimbursement The salary for this role is $95,000.00 - $105,000.00. This is the range that we in good faith anticipate relying on when setting wages for this position. We may ultimately pay more or less than the posted range and this range. This salary range may also be modified in the future. Henkel does not accept unsolicited resumes from search firms or employment agencies. Unsolicited referrals and resumes are considered Henkel property and therefore, Henkel will not pay a fee for any placement resulting from the receipt of an unsolicited referral. Henkel is an equal opportunity employer. We evaluate qualified applicants without regard to race, color, religion, sex, age, national origin, disability, veteran status, genetic information, and other legally protected categories. **JOB ID:** 25086785 **Job Locations:** United States, CT, Rocky Hill, CT | United States, FL, Orlando, FL | United States, FL, Tampa, FL | United States, GA, Atlanta, GA | United States, IL, Chicago, IL | United States, MI, Madison Heights, MI | United States, MN, Minneapolis, MN | United States, NJ, Bridgewater, NJ | United States, OH, Westlake, OH **Contact information for application-related questions:** ***************************** Please do not use this email address for sending your application or CV. To apply, please click on the "Apply for this role" button below. Applications sent via e-mail will not be accepted. **Application Deadline:** As long as the vacancy is listed on our Career Site, we are happy to receive your application **Job-Center:** If you have an application already, you can create or log in to your accounthere (******************************************************************************************************************************************************** to check the status of your application. In case of new account creation, please use your email address that you applied with. Activate external content When clicking the button below external content will be loaded which involves transfer of personal data (e.g. IP address) to external servers. This may involve that cookies are set by the external content provider. Please see Data Protection Statement for further information. **Accept for all YouTube content** Deactivate loading external content from YouTube. How is work at Henkel

• Mindlance is a minority-owned, national staffing firm specializing in Technology, Engineering, Scientific, Clinical, Financial and Professional skills. With a team of over 100 service delivery professionals spread over 10 locations, we serve contract and perm staffing needs of over 40 Fortune 1000 direct clients and leading MSP and VMS providers. Duration: 12+ months Location: Tampa, FL Job Description: · Assist in executing various studies for the IV projects. Examples include SIP studies, mixing, volume, temperature distribution. · Candidate should be able to execute studies with minimal direction, recommend solutions to issues, and general process and equipment feedback. · 5+ years of experience in validation studies for automated compunding vessels in a pharmaceutical environment. · Experience must include writing reports. Qualifications · 5+ years of experience in validation studies for automated compunding vessels in a pharmaceutical environment.

Do you have a passion for leveraging data, analytics, and AI to drive meaningful change? At GE Aerospace, we are transforming supply chain processes to address one of our most critical business challenges: delivery. As a Staff Enterprise Application Engineer specializing in Palantir, you will utilize your expertise in Palantir Foundry and AWS cloud technologies to design, deploy, and tailor solutions for complex aerospace challenges. In this role, you will build and maintain Foundry pipelines, modular applications, and workflows, while working closely with stakeholders to create cutting-edge solutions using ontology, advanced analytics, and AI. **** **Roles and Responsibilities** + Architect and design sound/supportable technical solutions to complex business requirements + Develop and maintain Foundry pipelines using Pipeline Builder to ingest, transform, and integrate data. + Build modular applications and workflows leveraging Python, and Foundry AIP. + Collaborate with data engineers, analysts, and stakeholders to refine data models and ontology mapping. + Assist in Foundry workshops to guide stakeholders through platform capabilities. + Support testing, debugging, and performance tuning of Foundry applications. + Work with aerospace data to identify patterns, trends, and insights using Palantir Foundry and AWS analytical tools. + Develop custom applications and workflows within Foundry and AWS to address specific challenges. + Ensure data integrity and compliance with aerospace industry standards. + Apply lean methodologies to identify opportunities for process improvement. + Share feedback with Palantir and AWS product teams to enhance tools and workflows. + Provide technical coaching and direction to more junior teammates. **Technical Qualifications** + Strong experience in Python, PySpark, and front-end frameworks like React, Angular, or Vue.js. + Experience with Pipeline Builder, AIP, and Foundry's application development ecosystem. + Proficiency in AWS cloud services such as EC2, S3, Lambda, RDS, and CloudFormation. + Experience with Git-based code repositories and CI/CD workflows. **Minimum Qualifications** + Bachelor's degree from accredited university or college with minimum of 4 years of professional experience OR associate's degree with minimum of 7 years of professional experience OR High School Diploma with minimum of 9 years of professional experience + Minimum 3 years of professional experience in Computer Science or "STEM" Majors (Science, Technology, Engineering and Math) + **Note:** Military experience is equivalent to professional experience The base pay range for this position is $110,700- $184,600. The specific pay offered may be influenced by a variety of factors, including the candidate's experience, education, and skill set. This position is also eligible for an annual discretionary bonus based on a percentage of your base salary/ commission based on the plan. This posting is expected to close on October 31, 2025. Healthcare benefits include medical, dental, vision, and prescription drug coverage; access to a Health Coach, a 24/7 nurse-based resource; and access to the Employee Assistance Program, providing 24/7 confidential assessment, counseling and referral services. Retirement benefits include the GE Retirement Savings Plan, a tax-advantaged 401(k) savings opportunity with company matching contributions and company retirement contributions, as well as access to Fidelity resources and planning consultants. Other benefits include tuition assistance, adoption assistance, paid parental leave, disability insurance, life insurance, and paid time-off for vacation or illness. General Electric Company, Ropcor, Inc., their successors, and in some cases their affiliates, each sponsor certain employee benefit plans or programs ( _i.e_ ., is a "Sponsor"). Each Sponsor reserves the right to terminate, amend, suspend, replace, or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a Sponsor's welfare benefit plan or program. This document does not create a contract of employment with any individual. **Eligibility Requirement:** + Legal authorization to work in the U.S. is required. We will not sponsor individuals for employment visas, now or in the future, for this job. **Desired Characteristics** + Ability to operate in an ambiguous environment as we establish this transformation program and define roles & responsibilities. + Demonstrated ability to quickly understand new concepts and analyze system deficiencies + Passionate about security and the quality of the applications they support + Organized, thorough, and detail oriented + Collaborates well with others to solve problems and actively incorporates input from various sources + Eager to learn, shares ideas, encourages and accepts feedback well + Strong analytical skills - strong problem-solving skills, communicates in a clear and succinct manner and effectively evaluates information / data to make decisions; anticipates obstacles and develops plans to resolve + Demonstrated customer focus - evaluates decisions through the eyes of the customer; builds strong customer relationships and creates processes from the customer's viewpoint + Experience working with an offshore development team + High level of energy and enthusiasm, with the ability to thrive in a dynamic, fast-paced setting + Comfortable with empowering colleagues and inspiring others to be their best **Note:** To comply with US immigration and other legal requirements, it is necessary to specify the minimum number of years' experience required for any role based within the USA. For roles outside of the USA, to ensure compliance with applicable legislation, the JDs should focus on the substantive level of experience required for the role and a minimum number of years should NOT be used. This Job Description is intended to provide a high-level guide to the role. However, it is not intended to amend or otherwise restrict/expand the duties required from each individual employee as set out in their respective employment contract and/or as otherwise agreed between an employee and their manager. **Additional Information** GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer (****************************************************************************************** . Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). **Relocation Assistance Provided:** No \#LI-Remote - This is a remote position GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.

The Engineering Division of Honeycomb Company of America, Inc., has an opening for an Aerospace Manufacturing Engineer with particular expertise and experience in aircraft composite and metal bonded structures. Primary Responsibilities: · Establish manufacturing requirements derived from OEM engineering drawings, process specifications, loft data, and contracts.· Create total manufacturing instruction package for the fabrication of aircraft metal bonded and composite structures. · Create BOMs, CAD drawings, and detailed manufacturing instructions that establish procedures for detail parts, assemblies, and tooling, as well as inspection and test requirements.· Provide immediate technical support to manufacturing personnel (work instruction clarification, performing redlines).· Support Quality department with non-conformance investigations.· Support Purchasing department in selection of materials and suppliers.· Work in coordination with all departments (Engineering, Production, Purchasing, Quality, etc.). Develop process solutions enabling increased throughput, cost savings, and quality performance. · Serve as a key contributor in the company's growth strategy and commitment to exceed customer expectations. Required Knowledge/Skills, Education and Experience:· Bachelor's Degree in Aerospace or Mechanical Engineering. · 1-3 years of experience in the manufacture or repair of aerospace composite structures. · Experience using SolidWorks CAD software.· Experience with metal bonding processes.· Experience with composites and plus.· Experience with loft data interpretation and 3D modeling.· Knowledge in areas such as NC routing, sheet metal manufacturing, brake forming, welding, machining, heat treating, chemical processing, anodizing, chem-milling, stretch forming, hydro-forming, composite layup and cure, fiberglass, carbon fiber, and Kevlar. · Highly motivated and able to work effectively in a high-paced, dynamic, and collaborative environment. · Must be able to work effectively across functional teams, and independently. · Strong ability to successfully manage multiple projects simultaneously · Must be a detail oriented, hands-on individual, with strong written and verbal communication skills.· Functional knowledge of CATIA, Fibersim, and model based definition. · Experience working with NADCAP requirements, as well as ISO9000, AS9100, AS9102. · Experience with ERP/MRP Systems. Physical Demands The physical demands described are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk or hear. The employee frequently is required to stand; walk; climb stairs, use hands and fingers; and reach with hands and arms. Ability to lift up to 15 pounds several times a day, and lift up to 40 pounds on an occasional basis. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Honeycomb Company of America is an Equal Opportunity and Affirmative Action Employer encouraging diversity in the workplace. All qualified applicants will receive consideration for employment without regard to their race, color, creed, religion, ancestry, national origin, sex, sexual orientation, gender identity, age, marital status, family responsibilities, pregnancy, genetic information, protected veteran or military status, other categories protected by federal, state, or local law, and regardless of whether the qualified applicants are individuals with disabilities. Honeycomb Company of America is a Drug-Free Workplace. Offers of employment with Honeycomb Company of America are conditioned upon the successful completion of a background check and drug-test, subject to applicable laws and regulations.

The Mid-Level Systems Engineering position is a full-time exempt position. The individual will provide expertise in Requirements Development, Architecture/CONOPs, Data Analysis, Software/Systems Integration and Software Trouble Investigations. The Mid-Level Systems Engineer will report directly to the Team Lead. Roles & Responsibilities Create, develop, and maintain requirements Support architecture development and CONOPs Support design and implement new tactical capabilities Update, maintain, and utilize various simulation tools to support data analysis Create presentations and reports in support of contract specific requirements. Create, run, and maintain test procedures and documentation. Develop test plans, test procedures, and test cases, incorporating automation where possible. Perform integration and test activities in-house or at site locations. Support other duties as assigned. Skills and Competencies BS degree in Computer Science, or an appropriate Engineering or Scientific discipline 5-12 years' experience required Knowledge of Software & Systems Engineering Product Development Cycle Knowledge of surface and air radar architecture - Naval Combat System Experience and/or CEC Experience with modeling and simulation of embedded software Experience with MATLAB/Simulink, and modeling & simulation tools Demonstrated experience with Software Integration and Test. Demonstrated experience with Sensor Integration and Tracking Familiarity with the following Tools: Git, ClearQuest, Jenkins, Eclipse, DOORS, Rhapsody Excellent written and verbal communication skills Physical Requirements (The below requirements are standard, non-manufacturing physical req) Ability to stand or sit for extended periods of time Ability to bend, stretch, and lift up to 25 pounds occasionally. Location Largo, FL Clearance Active Secret security clearance required Cummings Aerospace provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability, or genetics. In addition to federal law requirements, Cummings Aerospace complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Cummings Aerospace expressly prohibits any form of workplace harassment based on race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, genetic information, disability, or veteran status. Improper interference with the ability of Cummings Aerospace's employees to perform their job duties may result in discipline up to and including discharge.

Company: S.S. White Technologies Inc. Job Type: Full\-time, Regular Business Hours: 8:00 AM \- 4:30 PM, Monday \- Friday Career Level: 5+ Years of Experience Number of Openings: 3 Our Products and Customers: Flexible Shaft, Flexible Shaft Applications, Our Customer Responsibilities: Maintain expert level of product knowledge and application Articulate technology and product positioning to both business and technical users Listen, understand and convey customer requirements Assist in the design and development of new products and their specifications Provide application\-specific engineering support Qualifications: Minimum educational level: Bachelor's degree in Engineering 2+ years of experience in Engineering in a corporate environment Experience in the aerospace industry is strongly preferred Good communication skills, both verbally and in writing Ability to work with minimal supervision Benefits: A positive and family\-oriented culture Medical insurance, dental insurance and Long\-Term\-Disability insurance with company co\-payment; Life insurance paid 100% by the company; Vision insurance. 401 (k) plan with company matching. Work visa sponsorship. Who are we? Our Company, S.S. White Technologies Inc., is an internationally renowned manufacturer of aerospace, automotive and orthopedic surgical tools. Founded in 1844, we are one of the oldest manufacturing companies in the United States. Our Company's products are displayed in Smithsonian. S.S. White products are used in 98% of aircraft flying today, numerous surgical instruments, cutting edge industrial applications, millions of automobiles, on the space station and have even gone to the moon!We are a privately\-owned global company with manufacturing facilities in the US, UK, and India. Today, under the leadership of our President\/CEO Rahul Shukla, S.S. White is known as the number one technological leader in the world for flexible shaft products.For more information about our Company and our culture: Coverage about Mr. Rahul Shukla, Fun things at S.S. White. Our Team: We have a reputation for being an innovative, honest and progressive company that deeply cares for its employees. At S.S. White, we believe that our success is a testament to the commitment and excellence of our team. We are a group of hard\-working, honest, ethical and fun\-loving people. We believe in working hard and playing hard. Are you the person we are looking for? Apart from the superb professional qualifications and the outstanding achievements, we are looking for fun\-loving people with interesting hobbies. If you think you fit this profile, please write us an email. Tell us why we should hire you. Tell us something interesting about you that is relatively unique, something that shows us you are fun and interesting and an original thinker. S.S. White is an EEOC compliant employer "}}],"is Mobile":false,"iframe":"true","job Type":"Full time","apply Name":"Apply Now","zsoid":"636310722","FontFamily":"PuviRegular","job OtherDetails":[{"field Label":"Work Experience","uitype":2,"value":"4\-5 years"},{"field Label":"Industry","uitype":2,"value":"Manufacturing\/Engineering"},{"field Label":"Educational Degree","uitype":1,"value":"Bachelor's Degree"},{"field Label":"City","uitype":1,"value":"Saint Petersburg"},{"field Label":"State\/Province","uitype":1,"value":"Florida"},{"field Label":"Zip\/Postal Code","uitype":1,"value":"33709"}],"header Name":"Application Engineer","widget Id":"3**********0072311","is JobBoard":"false","user Id":"3**********9763001","attach Arr":[],"custom Template":"3","is CandidateLoginEnabled":false,"job Id":"3**********1163097","FontSize":"15","location":"Saint Petersburg","embedsource":"CareerSite","indeed CallBackUrl":"https:\/\/recruit.zoho.com\/recruit\/JBApplyAuth.do"}

BW Water is seeking a highly skilled Application Engineer to join our team. In this role, you will provide expert technical support and pre-sales engineering services to our Americas Sales team, ensuring the development of competitive and technically accurate proposals. You will collaborate closely with sales representatives to understand client needs and translate them into detailed, compelling technical specifications, contributing to our continued success. This role is ideally based in Tampa, Florida or Minneapolis, Minnesota. Requirements Bachelor's degree in Environmental Engineering, Mechanical Engineering, Chemical Engineering, or a related field. 3+ years of experience in the water and wastewater industry, with a strong understanding of treatment processes. Proficiency in technical software, such as CAD for design purposes and process modeling software for performance evaluations. Knowledge of relevant standards, including EPA, OSHA, and other industry-specific regulations. Strong analytical, problem-solving, and communication skills. Proven experience in all aspects of the technical proposal lifecycle, including gathering and analyzing client requirements, developing detailed system designs and specifications, performing cost estimations and creating budgets, preparing compelling technical documentation and presentations. Excellent verbal and written communication skills, with proficiency in English; additional languages relevant to the Americas region are a plus. Willingness to travel occasionally as needed to facilitate client engagement

Join our organization Flow & Energy Measurement, a leader in flow and energy measurement products since 1987. We pride ourselves on delivering exceptional customer service and high-quality, engineered instruments for hydronic heating and cooling systems. The Sales Engineer II position is a pivotal role within our team, providing advanced technical support and sales expertise. This role involves a high degree of interaction with customers and internal teams, requiring excellent communication and multitasking skills in a fast-paced environment. Key Responsibilities Customer Interaction & Support: Respond to inbound phone calls and emails from customers, representatives, and consulting engineers in a professional and technically accurate manner. Initiate calls to customers to address technical issues related to orders, quotations, and specifications. Sales Collaboration: Work cooperatively with our Customer Service Team, Regional and Territory Sales Managers, and Independent Sales Reps to achieve annual sales goals and ensure customer satisfaction. Technical Expertise: Develop and maintain in-depth technical knowledge of all our products and applications. Provide technical support and assistance to the Customer Service group, especially for large or complex orders. Quotation & Order Processing: Prepare quotations and respond to technical inquiries promptly. Assist independent reps in these efforts and maintain expertise with our order entry system. Engineering Support: Read and comprehend engineering specifications and drawings, recommend appropriate company products, and highlight exceptions to specifications. Support the preparation of submittal packages and custom wiring/installation diagrams. Project & Issue Management: Provide direct support for high-profile projects and technical service issues. Assist the service department with technical troubleshooting and product returns. Product Development Feedback: Collaborate with the Product Management Team to develop sales and technical documentation. Provide insights and feedback to improve our offerings. Leadership & Training: Guide and coach EITs, Engineer I's, and Customer Service personnel. Participate in training seminars for customers and offsite engineering sessions. Work with the Engineering and Product Management Department to create SDOs (Special Deviation Orders) for custom customer requests. Trade Shows & Special Projects: Attend trade shows in a supporting role and complete special projects as assigned by management. Preferred Qualifications A four-year degree in an engineering discipline is preferred; alternatively, a two-year technical degree combined with 4+ years of related experience may be considered. Strong computer skills are essential. Knowledge of the HVAC building automation industry is a plus.

Adidev Technologies,(*************************** a premier IT consulting firm delivering top-notch iOS & android Developer solutions to industry giants including Delta, Google, Apple, Spotify, US Bank, FedEx, and more. We're not just a software consulting company - we're a dynamic force shaping the future of technology.Partnering with industry giants, we consistently deliver groundbreaking solutions that redefine the digital landscape. As we continue to expand our footprint, we're on the hunt for exceptional individuals who can bring their technical prowess to our team and elevate our projects to new levels of innovation. Your journey with us means hands-on experience with renowned end clients. We're a people development firm. You bring your foundational skills & we nurture, mentor, and train you in iOS & Android Development to provide consultative services to our clients. We are seeking enthusiastic and skilled Entry - Mid-Senior-level iOS and Android developers with a minimum of 1-2 years of experience to join our dynamic team. This is a unique opportunity that requires dedication, the drive to excel, and a passion for creating impactful applications. Join us in a pivotal role that promises to challenge your expertise and drive your career to new heights. Expertise: We excel in IT consultative services and quality engineer development, with Good years of experience. Global Presence: Our diverse employee workforce spans four continents. Proven Track Record: Hundreds of Fortune 1000 and innovative startup clients with thousands of successful projects across the USA. How We'll Guide You Teaching and Development: We are dedicated to nurturing your growth and development, shaping you into an exceptional consultant capable of delivering top-tier solutions to our end clients. Custom Support: An array of teams, from Development Managers to Tech Subject Matter Experts, are dedicated to your success. Project Placement: A market-expertise team ensures you secure and thrive in projects with our esteemed clients. Career Growth: We facilitate industry experience to propel your technical journey forward. Job Description In this role, you will be an integral part of our development team, contributing to the design, development, and maintenance of large-scale applications for our prominent clients. We are focused on on-site collaboration; hence, we do not offer telecommuting or remote positions. Successful candidates must be open to relocating to new cities or states based on client assignments, typically spanning 6 to 18 months with the possibility of extensions. Key Role Highlights Position: Entry - mid- senior-level iOS and Android Developers Location: Onsite (No remote positions available) Relocation: Mandatory for assignments spanning 6 to 18 months with Extensions Compensation: Highly Competitive, commensurate with expertise Type: Full-time (W2 or Contract 1099), 40 hours per week Qualifications and Skills Responsibilities · Design, develop, and enhance applications for either the iOS or Android platform. · Ensure application performance, quality, and responsiveness. · Collaborate with a team to define, design, and implement new features. · Identify and address bottlenecks, fix bugs, and maintain code quality. · Establish effective communication with clients. · Provide accurate project milestones and timelines. · Maintain positive rapport with all clients · Gather requirements and provide accurate and realistic project milestones and timelines for completion · Complete coding tests or challenges as required. · Maintain consistent communication through phone, text, and email. · Suggest improvements to existing apps. · Deliver projects on time and communicate any changes promptly. Android Developer · Strong understanding of MVC / MVVM software architectural patterns. · Proficiency in Java and Kotlin (at least 1 year of experience). · Published at least 1 application on the Play Store. · Familiarity with Android SDK, various Android versions, and screen size adaptability. · Experience with testing frameworks like Espresso and JUnit. · Knowledge of mobile data storage using SQLite, Room. · Familiarity with RESTful APIs for back-end integration. · Comfortable with GIT, SVN, and source control. · Excellent communication skills (written and verbal). · Innate work ethic and self-leadership skills · Exceptional written and verbal communication aptitude · A portfolio featuring impactful application releases is a significant advantage IOS Developer · Proficiency in Swift and Objective-C. (atleast 1 year of experience). · Experience with iOS frameworks (e.g., Core Data,Coco touch, Combine & Core Animation). · Familiarity with design patterns (MVC, Singleton). · Published at least 1 application on the Play Store. · Thorough understanding of offline storage, threading, and performance optimization. · Knowledge of RESTful APIs for connecting iOS apps to back-end services. · Experience with 3rd party API integrations (e.g., Facebook, Dropbox). · Familiarity with UI/UX standards and Apple's design principles. · Knowledge of C-based libraries preferred. · Experience with performance and memory tuning tools. · Proficient in code versioning tools (e.g., Git). · Innate work ethic and self-leadership skills · Exceptional written and verbal communication aptitude · A portfolio featuring impactful application releases is a significant advantage Perks and Beyond! Competitive salary range: $60k to $85k or $30/hr to $40/hr (depending on experience) Pack your bags! Paid relocation is on us. Support, even from afar, with our remote assistance. Regular salary reviews? You betcha! Ready to Embark? If you're a visionary in mobile app development and meet our rigorous standards, we invite you to take this extraordinary step with us. Showcase your journey in pushing the limits of mobile engineering by submitting your resume and a curated selection of your most influential projects. At Adidev Technologies, we're dedicated to shaping your success. Join us to craft a future powered by innovation and growth. Note: Adidev Technologies Inc. is a staunch advocate of diversity and equal opportunity. We warmly welcome applications from candidates of all backgrounds, experiences, and walks of life. Your unique perspective could be the catalyst for our next revolutionary breakthrough.

Join American Structurepoint and become part of a team that goes the extra mile for our clients and communities. We live by our values - respect, staff development, results and family. Our team is encouraged to explore new ideas and turn our clients' dreams into reality. With exceptional benefits, training, and mentorship, we pave the way for a rewarding career. Ready for more than just a job? Explore opportunities with us and help improve the quality of life in the communities we serve. American Structurepoint's Road Engineering Group is seeking an entry-level Staff Engineer in Tampa, FL! In this role you'll work as part of a close-knit team on roadway projects for FDOT, cities, towns, and counties throughout Florida. Most of your work will take place in the office, with occasional site visits, as you assist with quantity takeoffs, create construction plan sets using MicroStation OpenRoads Designer (ORD), prepare design documentation, and develop construction cost estimates. From large interstate and interchange projects to urban reconstructions, rural maintenance, and roundabouts, you'll gain hands-on experience across a wide variety of impactful transportation projects. As a company, we are committed to living our values every day and providing you with the support and opportunities to build a fulfilling career while helping to shape Florida's infrastructure. Why start your career American Structurepoint: Onboarding & Training: Learn from experienced professionals and build meaningful, long-term relationships Mentorship & Career Growth: Receive support and guidance as you grow your skills and advance your career Real Projects: Contribute to high-profile, community-impacting projects from day one Industry Connections & Networking: Take advantage of exclusive industry connections and professional opportunities Future Focused: Build a strong foundation for a long, successful career with opportunities to grow within the firm Responsibilities What you will do: Assist with the design and layout of roadway alignments, both horizontal and vertical, for real-world transportation projects Get involved in key aspects of roadway design, including geometry, drainage, signage, pavement markings, and maintenance of traffic Help develop construction plan sets, gaining experience in how projects are prepared for bidding and construction Perform quantity calculations to support bid plan development and construction cost estimates Explore additional areas like pavement analysis, design, and utility coordination for a well-rounded experience Take on a variety of project support tasks, learning how transportation engineering projects come to life from concept to construction Other duties as assigned Qualifications Who you are: Recent or soon-to-be graduate with a bachelor's degree in civil engineering 0-4 years of relevant experience, such as internships, co-ops, academic projects, or entry-level engineering roles American Structurepoint is an equal employer opportunity and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability status, protected veteran status or any other characteristic protected by law. Who you are: Recent or soon-to-be graduate with a bachelor's degree in civil engineering 0-4 years of relevant experience, such as internships, co-ops, academic projects, or entry-level engineering roles

We are seeking a motivated Civil Project Engineer to play a key role in the planning, design, and execution of educational, sports, and other land/site development projects. The project engineer will work closely with our civil engineering and architecture teams to support the development of municipal parks and recreation, K-12, higher education, professional athletic facilities, and other land/site development projects, ensuring projects are designed with functionality, sustainability, and safety in mind. Your Impact: Assist in Design: Collaborate with the civil and architectural teams in designing site plans, utilities, drainage, and grading solutions. Site Evaluation: Conduct site visits and help prepare reports, documenting site conditions and potential challenges related to athletic, educational, and other site development facilities. CAD Drafting: Work with CAD staff to modify and update design drawings using AutoCAD or other relevant design software. Aid in developing civil engineering plans, including sports field layouts, stormwater management systems, transportation access, and utility layouts. Technical Support: Prepare engineering-related calculations and specifications. Perform drainage system design and calculations including stormwater management systems and storm sewer sizing. Perform water distribution and sanitary sewer collection system design and calculations. Collaboration: Work alongside other engineers, architects, landscape architects, contractors, and stakeholders to ensure alignment between civil engineering designs and architectural goals, specifically tailored to sports and educational environments. Sustainability Focus: Participate in projects aimed at creating environmentally responsible and energy-efficient facilities. Regulatory Research: Assist in researching local, state, and federal codes and regulations relevant to the project, including the different levels of athletic facilities. Documentation and Reports: Prepare technical documentation, reports, and presentation materials for review by senior engineers and project managers. Project Support: Provide general support to the engineering team, including assisting with cost estimates, timelines, and coordination of project tasks Construction Administration Support: Provide review of submittals and answer Contractor's RFIs. Perform periodic site observations during construction and prepare site observation reports. Assist in certifications and project close-out. Here's What You'll Need: Bachelor's or Master's degree in Civil Engineering, Environmental Engineering, or related field, from an ABET accredited university required. Applicants for this position are expected to have 2-5 years of experience since graduation working in the A/E/C industry. Previous full-time experience related to land/site development design in Florida is a plus but not required. Engineering Intern (EI) License required. Passed Florida PE Exam preferred, with the expectation of obtaining a Florida Professional Engineering license once qualified. Highly proficient with AutoCAD drafting skills, with a working knowledge of Civil 3D. Highly proficient with design software such as StormWise, StormCAD, WaterCAD, or other industry-related software. Highly proficient with MS Office suite. Strong interest in designing and improving athletic and educational facilities. Excellent communications skills, both oral and written. Excellent interpersonal skills with coworkers, owners, and public agency officials. Ability to handle multiple tasks and deadlines in a fast-paced environment. Familiarity of land development codes, environmental regulations, and construction processes.

To be eligible to enlist in the U.S. Navy, candidates must be between the ages of 18-34 The most powerful energy sources in the world need the most powerful minds behind them. As a Nuclear Reactors Engineer, youll be responsible for researching, designing, maintaining, operating and regulating the nuclear reactors and power plants that drive the most advanced fleet of submarines and aircraft carriers on Earth. Here, you can fuel a passion for problem-solving by defining and redefining the cutting edge of nuclear propulsion, while setting the standard in nuclear reactor research and regulation. RESPONSIBILITIES Naval Reactors Engineers have oversight of the Navy's entire fleet of nuclear-powered ships as well as shore-based prototypes and nuclear propulsion support facilities for Americas Navy. The wide array of technical areas involved in the Naval Nuclear Propulsion program include: Reactor and fluid systems design Reactor physics Materials development Component design such as steam generators, pumps and valves Instrumentation and control of reactor, steam and electric plants Testing and quality control Shielding Chemistry and radiological controls As a Navy Reactors Engineer stationed at Naval Reactors Headquarters in Washington, D.C., you will provide technical oversight while managing projects ranging from reactor design to fleet operations to de-fueling and decommissioning warships. PAY AND BENEFITS From the day you start, youll receive: Competitive salary Free health insurance Free housing A retirement plan 30 days paid vacation per year EDUCATION OPPORTUNITIES In addition to the best-in-class training and state-of-the-art facilities, current undergrad students who meet the prerequisite background will also get the chance to get paid while finishing school through the Nuclear Propulsion Officer Candidate (NUPOC) program. Students in majors like mathematics, engineering, physics and chemistry may receive preferred acceptance into the program. If accepted into the NUPOC program as an aspiring Naval Reactors Engineer, you can: Receive a salary in excess of $4,000 per month for up to 18 months prior to your college graduation Receive an immediate one-time sign-on bonus of $15,000 Enjoy military health care benefits while you are a student in the program Postgraduate Education Opportunities As a Naval Reactors Engineer, once youre out of school youll have a position waiting as a respected professional and Officer affiliated with the most accomplished nuclear program on earth. Beyond undergraduate and formal Navy training and education, you can pursue additional graduate education through the following: Post-9/11 GI Bill Navy Tuition Assistance Program Completing Joint Professional Military Education (JPME) at one of the various service colleges Using Tuition Assistance to attend online or in-person graduate programs during shore assignments. Navy College Program VOLED Assistance Center VOLED Region Advisors The Naval Postgraduate School (NPS) Navy War College (NWC) USAF Air University Air Command and Staff College QUALIFICATIONS AND REQUIREMENTS U.S. citizen between the ages of 19 and 29. Exceptions may be possible up to age 40. Graduate or current student pursuing a B.A., B.S. or M.S. (preferably major in mathematics, engineering, physics, chemistry or other technical areas). Those still in school may apply as early as 18 months from completion of an undergraduate degree for Naval Reactors Engineers. Applicants may also join the NUPOC program as early as 12 months from completion of a master's degree. Additional academic requirements include: Completed one academic year of calculus Completed one academic year of calculus-based physics A competitive GPA and a minimum grade of "B" in all technical courses General qualifications may vary depending upon whether youre currently serving, whether youve served before or whether youve never served before. WORK ENVIRONMENT Preliminary training and eventual staff assignments center around Naval Reactors Headquarters at the Navy Yard in Washington, D.C. At Headquarters, you will be a part of an elite, streamlined staff of roughly 500 people who oversee the entire Naval Nuclear Propulsion Program from cradle to grave. Even junior-level Naval Reactors Engineers assume responsibility for key technical work in a variety of state-of-the-art facilities, including: Two Department of Energy laboratories Two nuclear prototype/training sites Nearly 100 nuclear-powered ships and submarines Six shipyards More than 1,000 firms that support the Naval Reactors Program RequiredPreferredJob Industries Government & Military

We are Lennar Lennar is one of the nation's leading homebuilders, dedicated to making an impact and creating an extraordinary experience for their Homeowners, Communities, and Associates by building quality homes and providing exceptional customer service, giving back to the communities in which we work and live in, and fostering a culture of opportunity and growth for our Associates throughout their career. Lennar has been recognized as a Fortune 500 company and consistently ranked among the top homebuilders in the United States. Join a Company that Empowers you to Build your Future The System Engineer is responsible for comprehensive system support, administration, and product support for applications and initiatives surrounding the company's footprint of over 25,000 geographically distributed endpoints including iPhones, iPads, Macs, PC's, Tablets and Laptops as well as several BYOD Android devices. Duties include applying existing expertise in Apple and PC administration, including networking, deployment, and management. Including integration of Apple and Microsoft products with third party solutions and services. The System Engineer works closely with design and enhancements to existing and future systems and facilitates their integration into the company's environment. The System Engineer will play an integral part in expanding, developing, and maintaining the company's endpoint infrastructure and corresponding configuration management environment. * A career with purpose. * A career built on making dreams come true. * A career built on building zero defect homes, cost management, and adherence to schedules. Your Responsibilities on the Team * Coordinate with network engineering, business application, and other teams to implement desktop and server systems that utilize industry best practices to meet corporate objectives. * Deploy workstations, printers, all-in-one devices. * Manage all operating systems and end-user software. * Knowledge of communications (e-mail, instant messenger) and connection solutions, including workstation connectivity, local area networks, company Web site, intranet, and Internet applications. * Ensure the integrity and security of enterprise data on computers. * Support and administer existing mobile devices including iPads, iPhones, Android devices, Mac and PC computers. * Provide ongoing effort to ensure that all endpoints are properly updated, maintained, and patched, working closely with our security, governance, and QA teams. * Work with other teams on project work including integrations, LNN media assistance and other initiatives. * Translate business needs into technical solutions. * Help provide solutions using state-of-the-art technologies and methodologies. * Perform research around innovative technology and its administration and integration into Lennar applications and systems. * Endpoint communication, analytical and problem-solving skills to help identify, communicate, and resolve systems issues after technical analysis * Collaborate effectively with other team members and third parties such as vendors to support innovative technology. * Activation, termination and suspension of new mobile voice and data accounts with the carriers (AT&T, Verizon & T-Mobile). * Adding and removing international voice and data plans as associates travel internationally. * Enterprise Mobility Management system administration including the enrollment and management of mobile devices. Requirements * Bachelor's degree or equivalent relevant work experience / certifications. * Five + years relevant work experience (Mobility, mac OS & iOS, pc, tablet systems/solutions). * Extensive experience and expertise in mac OS and Apple iOS. * Extensive experience in planning, deploying, and maintaining Microsoft Office 365 solutions. * Extensive experience in Windows operating systems. * Extensive experience in enterprise mobility management systems administration (AirWatch or JAMF Pro, Intune) is a plus. * Experience with enterprise-level mobility administration and account administration with the major carriers (AT&T, Verizon & T-Mobile) Life at Lennar At Lennar, we are committed to fostering a supportive and enriching environment for our Associates, offering a comprehensive array of benefits designed to enhance their well-being and professional growth. Our Associates have access to robust health insurance plans, including Medical, Dental, and Vision coverage, ensuring their health needs are well taken care of. Our 401(k) Retirement Plan, complete with a $1 for $1 Company Match up to 5%, helps secure their financial future, while Paid Parental Leave and an Associate Assistance Plan provide essential support during life's critical moments. To further support our Associates, we provide an Education Assistance Program and up to $30,000 in Adoption Assistance, underscoring our commitment to their diverse needs and aspirations. From the moment of hire, they can enjoy up to three weeks of vacation annually, alongside generous Holiday, Sick Leave, and Personal Day policies. Additionally, we offer a New Hire Referral Bonus Program, significant Home Purchase Discounts, and unique opportunities such as the Everyone's Included Day. At Lennar, we believe in investing in our Associates, empowering them to thrive both personally and professionally. Lennar Associates will have access to these benefits as outlined by Lennar's policies and applicable plan terms. Visit Lennartotalrewards.com to view our suite of benefits. Join the fun and follow us on social media to see what's happening at our company, and don't forget to connect with us on Lennar: Overview | LinkedIn for the latest job opportunities. Lennar is an equal opportunity employer and complies with all applicable federal, state, and local fair employment practices laws.

To be eligible to enlist in the U.S. Navy, candidates must be between the ages of 18-34 The most powerful energy sources in the world need the most powerful minds behind them. As a Nuclear Reactors Engineer, youll be responsible for researching, designing, maintaining, operating and regulating the nuclear reactors and power plants that drive the most advanced fleet of submarines and aircraft carriers on Earth. Here, you can fuel a passion for problem-solving by defining and redefining the cutting edge of nuclear propulsion, while setting the standard in nuclear reactor research and regulation. RESPONSIBILITIES Naval Reactors Engineers have oversight of the Navy's entire fleet of nuclear-powered ships as well as shore-based prototypes and nuclear propulsion support facilities for Americas Navy. The wide array of technical areas involved in the Naval Nuclear Propulsion program include: Reactor and fluid systems design Reactor physics Materials development Component design such as steam generators, pumps and valves Instrumentation and control of reactor, steam and electric plants Testing and quality control Shielding Chemistry and radiological controls As a Navy Reactors Engineer stationed at Naval Reactors Headquarters in Washington, D.C., you will provide technical oversight while managing projects ranging from reactor design to fleet operations to de-fueling and decommissioning warships. PAY AND BENEFITS From the day you start, youll receive: Competitive salary Free health insurance Free housing A retirement plan 30 days paid vacation per year EDUCATION OPPORTUNITIES In addition to the best-in-class training and state-of-the-art facilities, current undergrad students who meet the prerequisite background will also get the chance to get paid while finishing school through the Nuclear Propulsion Officer Candidate (NUPOC) program. Students in majors like mathematics, engineering, physics and chemistry may receive preferred acceptance into the program. If accepted into the NUPOC program as an aspiring Naval Reactors Engineer, you can: Receive a salary in excess of $4,000 per month for up to 18 months prior to your college graduation Receive an immediate one-time sign-on bonus of $15,000 Enjoy military health care benefits while you are a student in the program Postgraduate Education Opportunities As a Naval Reactors Engineer, once youre out of school youll have a position waiting as a respected professional and Officer affiliated with the most accomplished nuclear program on earth. Beyond undergraduate and formal Navy training and education, you can pursue additional graduate education through the following: Post-9/11 GI Bill Navy Tuition Assistance Program Completing Joint Professional Military Education (JPME) at one of the various service colleges Using Tuition Assistance to attend online or in-person graduate programs during shore assignments. Navy College Program VOLED Assistance Center VOLED Region Advisors The Naval Postgraduate School (NPS) Navy War College (NWC) USAF Air University Air Command and Staff College QUALIFICATIONS AND REQUIREMENTS U.S. citizen between the ages of 19 and 29. Exceptions may be possible up to age 40. Graduate or current student pursuing a B.A., B.S. or M.S. (preferably major in mathematics, engineering, physics, chemistry or other technical areas). Those still in school may apply as early as 18 months from completion of an undergraduate degree for Naval Reactors Engineers. Applicants may also join the NUPOC program as early as 12 months from completion of a master's degree. Additional academic requirements include: Completed one academic year of calculus Completed one academic year of calculus-based physics A competitive GPA and a minimum grade of "B" in all technical courses General qualifications may vary depending upon whether youre currently serving, whether youve served before or whether youve never served before. WORK ENVIRONMENT Preliminary training and eventual staff assignments center around Naval Reactors Headquarters at the Navy Yard in Washington, D.C. At Headquarters, you will be a part of an elite, streamlined staff of roughly 500 people who oversee the entire Naval Nuclear Propulsion Program from cradle to grave. Even junior-level Naval Reactors Engineers assume responsibility for key technical work in a variety of state-of-the-art facilities, including: Two Department of Energy laboratories Two nuclear prototype/training sites Nearly 100 nuclear-powered ships and submarines Six shipyards More than 1,000 firms that support the Naval Reactors Program RequiredPreferredJob Industries Government & Military