Engineering associate jobs in Conway, AR

Department: Road and Bridge Position Control Number: 0200-054 FLSA Status: Non-Exempt; position is eligible for overtime Safety Sensitive Designation: This position is designated as safety-sensitive. Random Drug/Alcohol Test: Yes Opening Date: December 12, 2025 Closing Date: December 28, 2025 at 11:59 PM This should not be interpreted as all-inclusive. It is intended to identify the essential functions and minimum qualifications of this job. The incumbent(s) may be required to perform job-related responsibilities and tasks other than those stated in this . Nothing in this job description restricts management's right to assign or reassign job-related responsibilities and tasks to this job at any time. Certain functions are understood to be essential; these include, but are not limited to, attendance, getting along with others, working a full shift, and dealing with and working under stress. Any essential function of this class will be evaluated as necessary should an incumbent/applicant be unable to perform the function or requirement due to a disability as defined by the Americans with Disabilities Act (ADA). Reasonable accommodation for the specific disability will be made for the incumbent/applicant only to the extent medically and reasonably feasible. An Equal Opportunity Employer JOB SUMMARY: Responsible for assisting the Surveyor in all aspects of land surveying. ESSENTIAL JOB FUNCTIONS: * Researches records and legal documents to provide information on which planning, and decision making, is made. * Conducts on-site inspection of roads, subdivisions, public complaints, and right of way. * Prepares drawings, land descriptions, survey plots, and graphics artwork/illustrations from on-site inspections. * Reports to the County Department requesting research or reports for specific projects. * Conducts special projects as requested; assists the general public. SECONDARY DUTIES AND RESPONSIBILITIES: * Performs other related duties as required. PERSONNEL SUPERVISED: None WORKING CONDITIONS: Work is performed in a smoking-restricted office environment. Occasional travel to other County facilities is required. MINIMUM QUALIFICATIONS: REQUIRED SKILLS, KNOWLEDGE, AND ABILITIES: * Good knowledge of land surveying practices, techniques, and procedures. * Good knowledge of state and local surveying laws and regulations. * Good knowledge of Global Position Satellite Surveying methods. * Good knowledge of mapping software. * Ability to maintain detailed records regarding surveys and land descriptions. * Ability to read and interpret deeds, legal descriptions, maps, and other documents related to land boundaries. * Ability to attend work regularly and reliably. * Skill in the operation of survey equipment, including standard and Global Position Surveying Systems satellite. * Skill in the use of a computer. * Skill in the use of a calculator. PHYSICAL REQUIREMENTS: * Digital dexterity is necessary for keyboard operation. * Visual acuity is needed for use of a computer monitor. * Ability to work in a constant state of alertness and in a safe manner. * Ability to concentrate for long periods of time. EDUCATION AND EXPERIENCE: Completion of high school or equivalency; some experience performing within the Civil Engineering field; or any equivalent combination of experience and training which provides the required skills, knowledge, and abilities. Employment is contingent upon the successful completion of a motor vehicle report. In addition to pre-employment checks, employees who operate county vehicles are required to undergo an annual motor vehicle report. This position is safety-sensitive and is subject to random drug and alcohol testing. Must possess or be able to immediately obtain a valid Arkansas driver's license. Regular and reliable attendance is an essential function of this position. #ZR #LI-JM1

As a 100% employee-owned contractor, when you work at Sundt, you're not just hiring on at a company, you're joining a culture. Because everyone at Sundt is part owner, you'll join a team of people who are deeply invested in their work. From apprentices to managers, we're passionate about the details and deliberate in everything we do. At Sundt we focus on building long-term prosperity for our clients, communities and employee-owners. We offer competitive pay, industry-leading benefits including a 401k and employee stock ownership plan, incentive programs for craft and administrative employees as well as training that focuses on your personal and professional growth. We're driven by skill, grit and purpose. Join us as we strive to be the most skilled builder in America. Job Summary Sundt is looking for committed engineering (Civil, Structural, and Mechanical) and construction management students within accredited Universities/colleges. The internship will provide you with unique experiences on challenging projects throughout the US while providing you the opportunity to participate in several of the activities it takes to successfully build our projects. We're looking for the future leaders of our company and those who are inspired to go beyond the expected. Come internship with one of the best places to work, as voted on by our own employees and where our people make the difference. Key Responsibilities 1. Assisting with project record keeping, preparing shop drawings, and assisting with cost control records. 2. Assisting with report preparation, safety inspections, submittal logging and processing. 3. Assisting with surveying, testing, sample collection, drawing correction and filing. 4. Assisting with time keeping and cost control, inventory control, schedule checking, subcontractor monitoring. 5. Attending bid openings, conferences, etc.; taking notes, making records, completing forms. 6. Observing and reporting results of meeting and conducting site tours for visitors . 7. Preparing quantity take-offs, calling vendors and sub-contractors for proposals. 8. Working as a manual laborer, helper, clerk or technician assistant, etc. Minimum Job Requirements 1. A team player, ready and willing to take on whatever challenge is offered. 2. Currently enrolled in a four-year Construction Management or Engineering program. 3. Eager to learn, immensely curious, full of questions, and ready to get their hands dirty. 4. Prefer those who have interest in a construction career for a builder. 5. Proficient use of all Microsoft Office Suite programs. Note: Job Description is subject to change at any time and may include other duties as assigned. Physical Requirements 1. Ability to wear personal protective equipment is required (including but not limited to; steel toed shoes, gloves, safety glasses, hearing protection, hardhat, vest, etc.) 2. May reach above shoulder heights and below the waist on a frequent basis 3. May stoop, kneel, or bend, on an occasional basis 4. May use telephone, computer system, email, or other electronic devices on a limited basis to communicate with internal and external customers or vendors 5. Must be able to comply with all safety standards and procedures 6. Occasionally will climb stairs, ladders, etc. 7. Required to use hands to grasp, lift, handle, carry or feel objects on a frequent basis 8. Will interact with people frequently during a shift/work day 9. Will lift, push or pull objects on an occasional basis 10. Will sit, stand or walk short distances for up to the entire duration of a shift/work day. Safety Level Safety-Sensitive Note: Jobs with the Safety-Sensitive designation are those that include tasks or duties that the employer reasonably believes could affect the safety and health of the employee performing the task or others such as operating a vehicle, operating equipment, operating machinery or power tools, repairing/maintaining the operation of any vehicle/equipment, the handling/disposal/transport of hazardous materials, or the handling/treatment/disposal of potentially flammable/combustible materials. Equal Opportunity Employer Statement: Sundt is committed to the equal treatment of all employees, and/or applicants for employment, and prohibits discrimination based on race, religion, sex (including pregnancy), sexual orientation, gender identity, color, age, disability, national origin, covered veteran status, genetic information; or any other classification protected by applicable Federal, state, or local laws. Benefit list: Market Competitive Salary (paid weekly) Bonus Eligibility based on company, group, and individual performance Employee Stock Ownership Plan & 401K Industry Leading Health Coverage Starting Your First Day Flexible Time Off (FTO) Medical, Health Savings, and Wellness credits Flexible Spending Accounts Employee Assistance Program Workplace Wellness Programs Mental Health Program Life and Disability Insurance Employee-Owner Perks Educational Assistance Sundt Foundation - Charitable Employee-Owner's program

Your Work Shapes the World at Caterpillar Inc. When you join Caterpillar, you're joining a global team who cares not just about the work we do - but also about each other. We are the makers, problem solvers, and future world builders who are creating stronger, more sustainable communities. We don't just talk about progress and innovation here - we make it happen, with our customers, where we work and live. Together, we are building a better world, so we can all enjoy living in it. Caterpillar Inc. is seeking a Manufacturing and Automation Engineer at the North Little Rock facility in Arkansas. In this role, you will be responsible for overseeing the design, implementation, and maintenance of automated systems and new manufacturing processes. This position requires experience in automation technologies (especially related to welding) and manufacturing engineering. WHAT YOU WILL DO: • Creating and maintaining work instructions, tool lists, inspection guides, Control Plans, PFMEAs and SFMEAs for automation and other manufacturing processes. • Support new product introductions and continuous improvement efforts around people, quality, velocity, and cost for large fabrications. • Drive continuous improvement initiatives participating in Lean Manufacturing projects and 5S improvements. • Engages in creative problem-solving to address operational issues, including ergonomics and safety, efficiency improvements, process bottlenecks, and quality concerns related to automation and other manufacturing processes. • Works with internal and external suppliers to develop and manage projects, ensuring efficient and cost-effective systems and processes to produce quality products. • Provide manufacturing technical support in process controls for automation and other manufacturing process for large fabrications. • Monitor and improve equipment reliability by identifying and addressing problem areas, performing root cause analysis, and being the technical expert for the value stream. • Develop and optimize robot welding programs using ABB, Fanuc and CLOOS controls. • Ensures compliance with all manufacturing standards, procedures, and safety guidelines, including both Caterpillar and OSHA compliant procedures. WHAT YOU WILL HAVE: • Degree requirement: Bachelor's degree in engineering, science, or closely related discipline OR equivalent technical experience plus demonstrated competence of significant engineering and/or operational experience related to automation and manufacturing. • Hands-on experience with equipment setup, diagnostics, and optimization. • Manufacturing Equipment: Technical expertise in automation technologies: Experience in deploying automation solutions like Robots/Cobots, Vision Systems, and others. Some experience in PLC and other programming languages. • Lean Manufacturing: Demonstrated ability to apply lean manufacturing tools and methodologies in a production environment. • Manufacturing Safety: Expertise in manufacturing safety related to automation and other manufacturing processes for large fabrications, including performing inspections. • Decision Making and Critical Thinking: Strong critical-thinking and decision-making skills, with experience in evaluating options, predicting impact, and advising others. TOP CANDIDATES MAY ALSO HAVE: • Extensive Automation system experience, including PLCs and robots used in multi-pass welding. • Knowledge of welding processes use for large fabrications (automated and manual). • Prior Project Management experience. • Well-rounded understanding of both 6 Sigma and Lean Manufacturing concepts. ADDITIONAL INFORMATION: • This position requires the selected candidate to work on-site five days a week in the North Little Rock, AR facility. Summary Pay Range: $87,480.00 - $131,280.00 Compensation and benefits offered may vary depending on multiple individualized factors, job level, market location, job-related knowledge, skills, individual performance and experience. Please note that salary is only one component of total compensation at Caterpillar. Benefits: Subject to plan eligibility, terms, and guidelines. This is a summary list of benefits. Medical, dental, and vision benefits* Paid time off plan (Vacation, Holidays, Volunteer, etc.)* 401(k) savings plans* Health Savings Account (HSA)* Flexible Spending Accounts (FSAs)* Health Lifestyle Programs* Employee Assistance Program* Voluntary Benefits and Employee Discounts* Career Development* Incentive bonus* Disability benefits Life Insurance Parental leave Adoption benefits Tuition Reimbursement * These benefits also apply to part-time employees Posting Dates: December 5, 2025 - Any offer of employment is conditioned upon the successful completion of a drug screen. Caterpillar is an Equal Opportunity Employer, Including Veterans and Individuals with Disabilities. Qualified applicants of any age are encouraged to apply. Not ready to apply? Join our Talent Community.

Job Description This is a 2026 summer internship in our Engineering department. The intern will support the systems team by helping to digitalize the current ground test results performed on aircraft and thus acquiring practical experience through direct involvement in ongoing operations. Furthermore, the intern may engage in activities and events aimed at promoting networking within the Dassault Falcon Jet community and among peers, thereby strengthening professional relationships and fostering effective team collaboration. PRINCIPAL DUTIES/RESPONSIBILITIES (ESSENTIAL FUNCTIONS): Understand the current ground test procedures Provide a digital means to record ground test procedure Develop a database to store and evaluate the ground test results MINIMUM REQUIRED QUALIFICATIONS: Computer applications including Excel, Word, and PowerPoint Understanding of mechanical engineering principles Strong communication skills in English are essential Candidates should be receptive to constructive feedback Possess foundational knowledge of manufacturing processes. Must be currently enroll in an accredited college or university and must reside in the United States. ADDITIONAL DESIRED QUALIFICATIONS: Mechanical Engineering major preferred COMPENSATION: The compensation for this position is $20.00 per hour. This position is eligible for overtime. We are committed to finding the best, brightest and most dedicated individuals in the aviation industry. Our employees are the key to our success. Soar with us.

**INTRODUCTION and WHAT YOU WILL DO (Job Responsibilities)** Are you passionate about problem solving? Are you excited by solving real business challenges through innovation? Are you dedicated to collaborating with a cross functional team to provide a first-class customer experience? If so, come join the Gasboy Field Engineer Team as we continue to experience explosive growth in our Gasboy Business Unit serving customers in the commercial and industrial fueling industry. **About the Opportunity** Reporting to the customer operations manager, the Gasboy Field Engineer will play a critical role in continuously improving the customer experience. As a key member of the service operations team, you will spend most of your time in the field, supporting end customers and authorized service contractors with new product adoption, project rollouts, training, data collection, testing and onsite service and troubleshooting. **Key Responsibilities** + Support the on-site field service activities as the resident expert on Gasboy products to provide the ultimate consumer experience by diagnosing performance related issues, determining root cause, corrective actions, confirming resolution and regularly communicate with all stakeholders on status + Make recommendations for the development of effective training resources and troubleshooting guides with the product support specialist team + Provide recommendations to the market service manager to add or remove authorized service network providers to ensure best in class field service support for our customers + Ensure authorized serviced technicians are properly trained according to department compliance, work, and customer security requirements + Lead regular scheduled field training sessions with key service partners and distributors in a market for continuing education opportunities and knowledge transfer + Communicate with stakeholders to convey drivers of operational impact of findings to ensure contact center consistency, process alignment, and process improvements + Act as the communication liaison between internal stakeholders, customers and service contractors regarding on-site findings and resolution + Support PSS/Engineering as requested for onsite testing, data collection, and trouble shooting + Support ad hoc Service Operation's needs (contract maintenance, projects, FMS, etc.) for site related challenges + Utilize technical and analytical skills to support technical assistance center as expert on Gasboy product solutions + Maintain compliance with safety standards according to Gilbarco Veeder-Root, Customer and Regulatory policies **WHO YOU ARE (Qualifications)** + Preferred: Associates or bachelor's degree in computer science or networking + Preferred: 5 years or more of service in petroleum equipment with manufacturers certifications + Preferred: A+ and Linux certified or have the ability to obtain the A+ and Linux certifications within 90 days + Knowledge of Microsoft Windows, Excel, and Networking required + Knowledge of Linux and SQL a plus + Road Warrior- travel is 75% or more for this role to include overnight + Extensive experience interfacing with end customers + Experience in performing training to small and large groups + Exceptional work ethic with excellent analytical/troubleshooting skills + Ability to lift 30+ pounds, walk medium distances, and be on your feet for 2+ hours + Basic Electrical and Hydraulic knowledge required. Advanced a plus + Strong oral and written communication skills **Relationships** This position will interface with the following: **Internal** + Supervisor, Technical Support + Gasboy Service Manager + Gasboy Product Support Specialists + Gasboy Field Engineers + Area Service Managers + Authorized Service Contractors and Service Managers + Commercial Account Managers + Customer Service Agents + Service and Field Engineers **External** + Distributor Partners + End Users + Authorized Service Contractors + Installers **Personal Trait Profile** + Ability to multitask + Customer centric + Enjoys problem solving and trouble shooting + Results driven + Ability to remain calm in stressful situations + Attention to detail + Strong organization and prioritization skills + Self-directed, motivated, and diligent (comfortable taking ownership) + Problem solver + Analytical + Pragmatic The base compensation range for this position is $70,000 to $95,000 per annum. Your actual base salary will be determined based upon numerous factors which may include relevant experience, skills, location (labor market data), credentials (education, certifications), and internal equity. For this specific role, you may be eligible for overtime in accordance with state laws. Overtime hours are not guaranteed. Vontier partners with you and your family on your health and wellness journey. Visit VontierBenefits.com to view our benefits. We offer a premium suite of health and wellness programs for you and your family, including medical, dental, vision, disability and life insurance. With programs for family planning from Maven Clinic to managing diabetes like Livongo, coverage for women's health, support for adult and elder care, paid parental leave, a generous 401(k) plan with matching company contributions, and more. Vontier is here for all stages of life. We also offer paid time off up to 15 days each year, 12 paid holidays (including 2 floating holidays), and paid sick leave.* **Disclaimer:** The salary, other compensation, and benefits information is accurate as of the date of this posting. Sick leave amount may vary based on state or local laws applicable to the applicant's geographic location. The Company reserves the right to modify this information at any time, subject to applicable law. **WHO IS GILBARCO VEEDER-ROOT** Gilbarco Veeder-Root, a Vontier company, is the worldwide technology leader for retail and commercial fueling operations, offering the broadest range of integrated solutions from the forecourt to the convenience store and head office. For over 150 years, Gilbarco has earned the trust of its customers by providing long-term partnership, uncompromising support, and proven reliability. Major product lines include fuel dispensers, tank gauges and fleet management systems. **WHO IS VONTIER** Vontier (NYSE: VNT) is a global industrial technology company uniting productivity, automation and multi-energy technologies to meet the needs of a rapidly evolving, more connected mobility ecosystem. Leveraging leading market positions, decades of domain expertise and unparalleled portfolio breadth, Vontier enables the way the world moves - delivering smart, safe and sustainable solutions to our customers and the planet. Vontier has a culture of continuous improvement and innovation built upon the foundation of the Vontier Business System and embraced by colleagues worldwide. Additional information about Vontier is available on the Company's website at *************** . **At Vontier, we empower you to steer your career in the direction of success with a dynamic, innovative, and inclusive environment.** Our commitment to personal growth, work-life balance, and collaboration fuels a culture where your contributions drive meaningful change. We provide the roadmap for continuous learning, allowing creativity to flourish and ideas to accelerate into impactful solutions that contribute to a sustainable future. Join our community of passionate people who work together to navigate challenges and seize opportunities. At Vontier, you are not on this journey alone-we are dedicated to equipping you with the tools and support needed to fuel your innovation, lead with impact, and thrive both personally and professionally. **Together, let's enable the way the world moves!** "Vontier companies are equal employment employers and evaluate qualified applicants without regard to race, color, national origin, religion, ancestry, sex (including pregnancy, childbirth and related medical conditions), age, marital status, sexual orientation, gender identity or expression, and other characteristics protected by law."

We are a large growing mechanical contractor in Arkansas that works on many of Arkansas's biggest and best HVAC and Plumbing Projects. This is a full-time position with great salary and benefits package as well as career-growth opportunities. We are planning to hire Arkansas's best and brightest HVAC and Plumbing Design Engineer's in the near future. Responsibilities: Ensure client satisfaction in early phase of upcoming projects. Review project specifications, design, identify value engineering, and calculations accurately. Attend events, job sites, and meet closely with: Owners, clients, architects, as well as sub-contractors and MEP-Design Engineers. Requirements: Local Stable work history. 5+years of HVAC Engineering and Design experience. Bachelor's degree in Mechanical Engineering, PE License preferred. Strong knowledge in: State and Local HVAC and Plumbing Building Codes, AutoCAD, Microsoft office, Carrier HAP, Trane Trace 700, Revit, BlueBeam, and Navisworks.

What we offer Explore a world of opportunities with us. Look ahead with us and help shape innovative solutions to make our world more sustainable and life healthier, more vibrant and more comfortable. At Evonik, you have the chance to explore, thrive, and grow alongside 33,000 colleagues. Among attractive career paths and high-quality development programs, we not only offer performance-based remuneration and occupational health benefits but also hybrid and flexible working environments with #SmartWork. Bring your fresh perspective, develop your strengths, break out your mold, and find a career that fits your dreams with us. Click on the link below to learn what our employees have to say about Evonik: ************************************************** This position exists to assist with the evaluation of catalyst and adsorbent materials in the Catalysts business line within Evonik. The RD&I Engineer (Catalyst and Adsorbent Testing) will work in the Catalysts RD&I organization to develop, test, and evaluate new and exciting catalysts and adsorbents used in a variety of industries and applications with a focus on the next generation of adsorbent manufacturing. The ideal individual would have the ability to proactively take a general test plan and develop and execute the necessary steps to generate applicable data. Furthermore, preferred candidates will have the ability to analyze, present, and draw conclusions from the resulting data. The candidate will need to plan, prioritize, and manage multiple time sensitive projects. Above all, the individual will work in a cross-functional team environment requiring a high degree of initiative, self-motivation, and flexibility to monitor and move project forward quickly and safely. RESPONSIBILITIES Supports/takes responsibility for direct technical oversight and operation of lab-scale testing and evaluation of lithium sorbent materials and hydrotreating catalysts. Position is expected to provide input in application technology aspects of both of these materials. Support the generation of catalyst and adsorbent prototypes and execute experimental programs (with input from senior members of the team) to evaluate those materials. This will involve both hands-on lab and pilot execution and analysis of the results. Willingness and ability to learn and apply the fundamentals of heterogeneous catalysis, chemical simulation or modeling, reaction and adsorption theory is beneficial. Adequately document and communicate the knowledge gained from the development work in research reports Apply engineering and chemistry fundamentals to troubleshoot and identify root causes in application test units. Interact with a range of internal and external customers to better understand their systems and needs. Professionally communicate across a broad range of mediums and in varied environments. REQUIREMENTS BS, Chemical Engineering, Chemistry or similar field. 0-5 years of working experience including working in a chemical lab, plant or pilot plant operation including internships. Strong verbal and written communications skills. Demonstrated ability to apply technical knowledge to diagnose, troubleshoot, and solve problems Ability to effectively plan, prioritize, and manage time-sensitive projects with minimal oversight. Ability to work in multi-disciplinary project teams with a high degree of initiative and self-motivation The Evonik Group adopts an Equal Employment Opportunity (EEO) approach. Candidates are assessed based on their educational qualifications, experience, job competencies and potential and shall not be discriminated against on the basis of race, ethnicity, age, gender, religion, nationality, disability or sexual orientation or other classifications protected by local, state, or provincial regulations. Your Application To ensure that your application is proceeded as quickly as possible and to protect the environment, please apply online via our careers portal. Further information about Evonik as Employer can be found at *************************** Please address your application to the Talent Acquisition Manager, stating your earliest possible starting date and your salary expectations. Your Talent Acquisition Manager: Brittney Compton [C] Company is Evonik Corporation

We are looking for an intern to work with our engineering team at NOV Little Rock. Primary responsibilities of this internship will be to create, revise, and manage technical documentation that is used by our operators on the manufacturing floor. This work is critically important to the safety, quality, and productivity of the plant. Secondary responsibilities will include the following: * Supporting a 5S program in the facility - tasks will include sorting, labeling, and working with vendors to develop adequate signage. * Recording process cycle times for efficiency review. * Supporting field tool production. * Other duties as assigned. Job requirements: * Excellent written and verbal communication skills including grammar and spelling. * High attention to detail. * Strong work ethic. * Proficiency with Microsoft Word, Power Point, and Excel. * Background in engineering as a student and/or in past work experience. * Ability to properly use measuring devices such as scales, calipers, and measuring tapes. Perks of the job: * Paid position up to 29 hours per week. * Exposure to compression molding and filament winding manufacturing techniques. * Experience with technical writing, lean manufacturing methods, and real world problem solving.

What if you were given the opportunity and responsibility to make a difference? At International Paper, you control your destiny. We offer challenging assignments and total rewards in countries around the world. When we say infinite possibilities, we mean it. Apply now and join a community that improves people's lives, the planet and our company's performance by transforming renewable resources into products people depend on every day. **Project Engineer - Packaging Solutions North America (PSNA) Engineering** **Position Title:** Project Engineer **Pay Rate: $115,000 - $134,000** _Multiple factors, including Individual experience, skills and abilities will determine where an employee is ultimately placed in the pay range._ **Category/Shift:** Salaried Full-Time **Physical Location:** Memphis TN. Does not require relocation to Memphis. Must live near an US airport as this position requires approximately 50% travel. **The Job You Will Perform:** + Responsible for engineering and managing the installation of equipment within corrugated manufacturing facilities. + Directly responsible to assure all capital and repair projects assigned are installed as per the project scope, schedule, cost estimate and budget, and with minimum plant production interference. + Reports to the Project Engineer Lead in PSNA Engineering. The PL of this role may vary (PL 14, 15 or 16) according to candidate skill set and experience. + Lead the project management of multiple, concurrent projects involving installation of corrugated manufacturing equipment and/or plant infrastructure improvements. + Project management responsibilities include organizing/planning, scoping & bidding, coordination of schedule, and managing the project to fruition. + Perform detailed engineering for installation of corrugated manufacturing equipment and/or plant infrastructure improvements. + Travel to sites as needed to manage major and minor projects & equipment installations. + Act as the subject matter expert and discussion partner to Packaging Solutions North America (PSNA) facilities on all aspects of the corrugated manufacturing process, and project implementation. **The Qualifications, Skills and Knowledge You Will Bring:** + BS degree or equivalent experience in engineering or related business discipline. + 5+ years corrugated box industry experience including a detailed understanding of corrugated equipment, the corrugating process and applicable OSHA health & safety policies/laws. + Requires understanding of engineering process and the mechanical, electrical, and scheduling/organizational requirements for corrugated equipment installations. + Proficiency in Microsoft Office Suite, including Microsoft Project. + Proficiency with AutoCAD software to create, view and modify drawings for comparative evaluation and final project construction/installation; utilize AutoCAD software to create and modify plant layouts, equipment layouts & foundation drawings for contractor bid packages. + Advanced project management skills with experience managing multiple, current, major and minor engineering projects. + Ability to communicate technical concepts effectively to all levels of company management. + Knowledge and understanding of contractor services - mechanical, electrical, and structural. + Organizing + Time Management + Priority Setting + Action Oriented + Decision Quality + Problem Solving + Functional /Technical **The Benefits You Will Enjoy:** International Paper offers a benefits package that includes health, welfare and retirement plans including Medical, Dental, Life insurance, Flexible Spending Accounts, Short-term and Long-term Disability, 401(k), Company-funded retirement contributions, Paid Time Off, Education & Development (including Tuition Reimbursement), Student Loan Repayment Assistance, and Voluntary Benefits including insurance for home, auto, vision and pets. **The Career You Will Build:** Sales and Leadership training, promotional opportunities within a global company **The Impact You Will Make:** We continue to build a better future for people, the planet, and our company! IP has been a good steward of sustainable practices across communities around the world for more than 125 years. Join our team and you'll see why our team members say they're **Proud to be IP** . **The Culture You Will Experience:** International Paper promotes employee well-being by providing safe, caring and inclusive workplaces. We have team members all around the world with diverse backgrounds, experiences, and perspectives. These are our strengths. We are committed to creating a culture where all individuals are respected, valued, engaged and have an opportunity to do their best work every day. We invite you to bring your uniqueness, creativity, talents, experiences, and safety mindset to be a part of our increasingly inclusive and diverse culture. **The Company You Will Join:** International Paper (NYSE: IP) is the global leader in sustainable packaging solutions. With company headquarters in Memphis, Tennessee, USA, and EMEA (Europe, Middle East and Africa) headquarters in London, UK, we employ more than 65,000 team members and serve customers around the world with operations in more than 30 countries. Together with our customers, we make the world safer and more productive, one sustainable packaging solution at a time. Net sales for 2024 were $18.6 billion. In 2025, International Paper acquired DS Smith creating an industry leader focused on the attractive and growing North American and EMEA regions. Additional information can be found by visiting internationalpaper.com International Paper is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected veteran status, age, or any other characteristic protected by law. International Paper complies with federal and state disability laws and makes reasonable accommodations for applicants and employees with disabilities. If reasonable accommodation is needed to participate in the job application or interview process, to perform essential job functions, and/or to receive other benefits and privileges of employment, please contact reasonable.accommodations@ipaper.com or **************. Memphis TN 38197 Share this job: Location: STATE WIDE, AL, US, #STATE WIDE, NC, US, #STATE WIDE, NM, US, #STATE WIDE, TN, US, #STATE WIDE, MS, US, #STATE WIDE, NV, US, #STATE WIDE, OR, US, #STATE WIDE, CA, US, #STATE WIDE, GA, US, #STATE WIDE, MA, US, #STATE WIDE, LA, US, #STATE WIDE, NJ, US, #STATE WIDE, UT, US, #STATE WIDE, AR, US, #STATE WIDE, MD, US, #STATE WIDE, IA, US, #STATE WIDE, VA, US, #STATE WIDE, TX, US, #STATE WIDE, AZ, US, #STATE WIDE, MI, US, #STATE WIDE, MO, US, #STATE WIDE, KS, US, #STATE WIDE, PA, US, #STATE WIDE, NE, US, #STATE WIDE, CT, US, #STATE WIDE, SD, US, #STATEWIDE, VT, US, #STATE WIDE, MN, US, #STATE WIDE, NH, US, #STATE WIDE, IL, US, #STATE WIDE, CO, US, #STATE WIDE, NY, US, #STATE WIDE, ME, US, #STATE WIDE, WI, US, #STATE WIDE, OH, US, #STATE WIDE, FL, US, #STATE WIDE, RI, US, #STATE WIDE, SC, US, #STATE WIDE, KY, US, #STATE WIDE, OK, US, #STATE WIDE, IN, US, #STATE WIDE, WA, US, # Category: Manufacturing Date: Nov 20, 2025 If you are not finding suitable opportunities, please click below to join our talent community!

Arkansas Department of Health 4815 W Markham Street Little Rock, AR 72***********9 County: Pulaski City: Little Rock Anticipated Starting Salary: $47,396.96 Division of Public Health Practice - Engineering * Additional Preferences: In-State and out-of-state travel for two (2) to three (3) nights per week required. A valid driver's license is required. Must be comfortable with extended periods of driving. Good computer skills including experience working with Microsoft Office Programs (Word and Excel) preferred. One (1) year of experience in laboratory analysis or knowledge of Safe Drinking Water Act preferred. The ability to work independently and under direct supervision preferred. Must be able to work in an outdoor environment during varying weather the year round. Must have the ability to lift fifty (50) pounds. This primary job function of this position is collecting water samples. A Water Operators License is preferred. Hiring Official: C. Robertson The mission of the Department of Health is to protect and improve the health and well-being of all Arkansans. Position Information Job Series: Trades - Applied Trades Classification: Engineering Specialist Class Code: TAT03I Pay Grade: SGS05 Salary Range: $47,397 - $70,148 Job Summary The Engineering Specialist is a support role within an engineering division, designed for individuals launching their careers in the field. In this classification, the candidate works under the supervision of senior engineers and project managers, assisting with technical tasks, data collection, project documentation, and preliminary design work. The role is structured as a learning experience, where on-the-job training and mentorship are provided to help develop fundamental engineering skills. The Engineering Specialist plays a vital role in ensuring that essential engineering projects run efficiently and meet quality and safety standards while building a strong foundation for future growth in the engineering profession. Primary Responsibilities Assist in gathering field data for engineering studies by using both manual and electronic survey devices. Help with collecting and analyzing measurements, technical data, and other essential parameters required by engineering projects. Assist in drafting, reviewing, and updating project specifications and design documents. Collaborate with senior engineers to support preliminary design, calculations, and feasibility studies. Help manage project schedules by tracking progress and reporting on milestones or delays. Operate engineering software, such as computer-aided design programs, to modify or create technical drawings. Assist in data entry and maintaining electronic records of project details and engineering computations. Participate in team meetings and contribute ideas to solving technical challenges. Knowledge and Skills Demonstrates the ability to analyze data, interpret technical information, and support engineering decisions. Capable of documenting processes clearly and communicating technical details effectively to both technical and non-technical team members. Works collaboratively in a dynamic team environment, offering support and seeking guidance as needed. Ensures accuracy in measurements, calculations, and documentation which is critical to maintaining quality standards. Minimum Qualifications High school diploma or GED. Licensure/Certifications N/A OTHER JOB RELATED EDUCATION AND/OR EXPERIENCE MAY BE SUBSTITUTED FOR ALL OR PART OF THESE BASIC REQUIREMENTS, EXCEPT FOR CERTIFICATION OR LICENSURE REQUIREMENTS, UPON APPROVAL OF THE QUALIFICATIONS REVIEW COMMITTEE. The State of Arkansas is committed to providing equal employment opportunities to all employees and applicants for employment without regard to race, color, religion, sex, pregnancy, age, disability, citizenship, national origin, genetic information, military or veteran status, or any other status or characteristic protected by law. Nearest Major Market: Little Rock

Job DescriptionBenefits: 401(k) matching Bonus based on performance Dental insurance Health insurance Paid time off Vision insurance REC is seeking an Environmental Project Engineer to join an Industrial focused team and be part of creating innovative solutions that drive positive change in communities. In this role, you will apply diversified knowledge of engineering principles and practices to a broad variety of assignments and related fields. Must be a Registered Professional Engineer whose supervision and guidance relate largely to overall objectives, critical issues, new concepts, and policy matters. The project engineer supervises, coordinates, and reviews work of engineers or technicians and performs complex or novel assignments that require development of new and improved techniques and procedures. Key Responsibilities: Prepares planning and design documents in appropriate engineering discipline. Coordinates assistant and associate professional staff and technical staffs work; may supervise lower-level staff. Performs process design calculations, prepares cost estimates, and uses economic analyses for comparison of alternatives. Develops project scope of work; develops project schedule; prepares project initiation paperwork; manages budget reviews and schedules progress reports. Coordinates projects with other teams; performs and coordinates design aspects of projects; directs team members on design tasks; maintains project records (correspondence, drawings, and files); coordinates with clients; attends client meetings. Manages the preparation of technical reports, memos, and summaries to effectively communicate findings to clients and internal teams. Serves as project manager for projects. Collaborate with project managers and multidisciplinary teams to ensure project deliverables are completed on time, within budget, and meet client expectations. Assist with marketing / business development and prepare project proposals. Qualifications Bachelors or Masters degree in environmental or civil engineering from an ABET-accredited institution. 6 or more years of relevant environmental or civil engineering experience, specifically with water / wastewater treatment or environmental design. Must be a registered Professional Engineer. Proficiency with engineering tools, software, and methodologies. Strong working knowledge of Civil 3D and AutoCAD.

BU1 Powertrain and Charging EDUCATION and/or EXPERIENCE * Must be enrolled in four-year engineering program. Must be 1-3 year away from graduation. * Experience with software such as Excel, Programming languages, AutoCAD, Inventor is preferred. Hands on experience with engines and machining are preferred, but not required. * Willingness to work in a plant/manufacturing environment * Preferred Worked with or exposure to manufacturing processes for: * Knowledge of statistical methods as applied to experimental design and process development * Demonstrated leadership in field of study, extracurricular activities, or service organizations * Outstanding interpersonal and relationship management skills with the ability to effectively collaborate with varying levels of the organization and external contacts related to work assignments * Excellent verbal and written communication skills with the ability to distill complex subjects to a wider audience * Emerging partnership and collaboration skills and ability to learn from and share knowledge with co-workers in a fast-paced environment * Ability to deal with ambiguity, take initiative/self-directed * Evidence of strong character with integrity, honesty, accountability, and trust * Consistently demonstrates innovative thinking ESSENTIAL DUTIES AND RESPONSIBILITIES include the following: * Assist in development of process prints, future cell layouts and moves - CAD Layouts * Assist in process improvements and cost reduction projects * Assist engineers with design and implementation of fixtures, tooling, accessories, etc * Participate and/or lead problem solving activities * Assist engineers with creating Manufacturing Instructions, Standard Work & Training Documents * Participate in Lean manufacturing teams * Conduct time studies and help with routings * Data entry and maintenance of engineering items within SAP operating system * Confer with engineers, production personnel, maintenance, or others to resolve machine problems or malfunctions * Must be able to work effectively with operators and other manufacturing support staff to solve problems and improve productivity * Create flow charts, spreadsheets, and presentations in support of staff projects. * Lean process analysis and value stream mapping. * Other duties as assigned. Closing Date: 10/24/2025 I Weekly Working Hours: 20-25 I Salary: Based on standing in degree Do you have any questions? ************************ ********** US Facts about the job Benefits: Entry level: Internship Part- / Full-time: Part Time Functional area: Production & Industrial Engineering Department: BU1 Powertrain and Charging Location: Russellville, AR, US, 72802 Russellville, AR, US, 72802 Russellville, AR, US, 72802 Company: MAHLE Engine Comp.(US) Closing date for applications Don't waste any time, apply while the position is online. Your future at MAHLE As a team player and someone who thinks ahead, you can deploy all your skills with us. In cooperation with colleagues from different countries and areas, you contribute in designing the mobility of the future. When selecting MAHLE, you choose trend-setting technologies and strategies. Are you interested in working with us and developing efficient and environmentally-friendly solutions, optimising existing products, and turning innovative ideas into reality? Then MAHLE is the right address for you. Shape the future with us.

The Kinetic Group is a world leader in the design, manufacturing, and distribution of small caliber ammunition under the iconic brands B&P, CCI, Federal Premium, Fiocchi, HEVI-Shot, Remington and Speer. We have domestic ammunition manufacturing facilities in Minnesota, Idaho, Arkansas, and Missouri, and service law enforcement, government agencies and sporting enthusiasts throughout the world. Today, The Kinetic Group is a part of the Ammo+ division of The Czechoslovak Group (CSG), which holds a diverse portfolio of companies in the defense, security, automotive, aerospace and rail industries. At The Kinetic Group, our interns play a vital role in advancing our mission to deliver high-quality, reliable ammunition to customers worldwide, offering you a unique chance to make a real impact in an industry fueled by precision and passion. The Quality Intern works in close coordination with the Area Quality Engineers to identify and capitalize on opportunities that have improvement potential both plantwide and within specific areas to improve finished product quality and first-time yield, with emphasis on prevention of Quality issues. This position reports to the Sr. Quality and Ballistics and Quality Manger and is based out of our Lonoke, AR office. What you'll do: Be able to learn and understand the manufacturing processes of ammunition and how quality pertains to ammunition manufacturing. Perform machine/process capability studies to determine the validity of process parameters and identify areas or potential improvements, to include implementing improvements under the guidance of an Area Quality Engineer. Develop and improve Quality Inspection Documents so that quality inspections are clearly defined to the production areas. Be able to learn ISO 9001:2015 requirements and assist as an ISO Internal Quality Auditor in at least three quality audits within the manufacturing plant. Develop, review, and improve gage systems to maximize the inspection effectiveness to improve inspection efficiency and reduce operator measurement error. Learn the ballistic testing of ammunition and ammunition components in how it pertains to the manufacturing of ammunition to determine if the ammunition is conforming to specific requirements. Experience you bring: Three years of college, or within one year of graduating with a bachelor's degree or higher in an engineering or mathematics/statistics discipline. 0-2 Years of experience with solving problems using data and analysis You might have: Strong mechanical skills Knowledge in statistical analysis in being able to apply to manufacturing processes. Additional Information: Shift: Monday-Friday: 8:00am-5:00pm Summer Internship: May-August Got questions? We've got answers! 👉 Explore our FAQ Page: ***************************************************** Work Environment: Employee work assignments may include tasks working with and/or exposure to potentially hazardous areas, including flammables and explosives. Safety training is provided to all employees to ensure compliance with company and federal regulations. Pay Range: Hourly Rate: $20.00 - $35.00 The actual annual salary offered to a candidate will be based on variables including experience, geographic location, education, and skills/achievements, and will be mutually agreed upon at the time of offer. We offer a highly competitive salary, comprehensive benefits including: medical and dental, vision, disability and life insurance, 401K, PTO, tuition reimbursement, gear discounts and the ability to add value to an exciting mission! Our Postings are not intended for distribution to or use in any jurisdiction, country or territory where such distribution or use would violate local law or would subject us to any regulations in another jurisdiction, country or territory. We reserve the right to limit our Postings in any jurisdiction, country or territory. Equal Opportunity Employer Minorities/Females/Protected Veteran/Disabled

The Kinetic Group is a world leader in the design, manufacturing, and distribution of small caliber ammunition under the iconic brands B&P, CCI, Federal Premium, Fiocchi, HEVI-Shot, Remington and Speer. We have domestic ammunition manufacturing facilities in Minnesota, Idaho, Arkansas, and Missouri, and service law enforcement, government agencies and sporting enthusiasts throughout the world. Today, The Kinetic Group is a part of the Ammo+ division of The Czechoslovak Group (CSG), which holds a diverse portfolio of companies in the defense, security, automotive, aerospace and rail industries. At The Kinetic Group, our interns play a vital role in advancing our mission to deliver high-quality, reliable ammunition to customers worldwide, offering you a unique chance to make a real impact in an industry fueled by precision and passion. The Quality Intern works in close coordination with the Area Quality Engineers to identify and capitalize on opportunities that have improvement potential both plantwide and within specific areas to improve finished product quality and first-time yield, with emphasis on prevention of Quality issues. This position reports to the Sr. Quality and Ballistics and Quality Manger and is based out of our Lonoke, AR office. **What you'll do:** + Be able to learn and understand the manufacturing processes of ammunition and how quality pertains to ammunition manufacturing. + Perform machine/process capability studies to determine the validity of process parameters and identify areas or potential improvements, to include implementing improvements under the guidance of an Area Quality Engineer. + Develop and improve Quality Inspection Documents so that quality inspections are clearly defined to the production areas. + Be able to learn ISO 9001:2015 requirements and assist as an ISO Internal Quality Auditor in at least three quality audits within the manufacturing plant. + Develop, review, and improve gage systems to maximize the inspection effectiveness to improve inspection efficiency and reduce operator measurement error. + Learn the ballistic testing of ammunition and ammunition components in how it pertains to the manufacturing of ammunition to determine if the ammunition is conforming to specific requirements. **Experience you bring:** + Three years of college, or within one year of graduating with a bachelor's degree or higher in an engineering or mathematics/statistics discipline. + 0-2 Years of experience with solving problems using data and analysis **You might have:** + Strong mechanical skills + Knowledge in statistical analysis in being able to apply to manufacturing processes. **Additional Information:** + Shift: Monday-Friday: 8:00am-5:00pm + Summer Internship: May-August **Got questions?** **We've got answers!** Explore our FAQ Page: ***************************************************** **Work Environment:** Employee work assignments may include tasks working with and/or exposure to potentially hazardous areas, including flammables and explosives. Safety training is provided to all employees to ensure compliance with company and federal regulations. **Pay Range:** Hourly Rate: $20.00 - $35.00 The actual annual salary offered to a candidate will be based on variables including experience, geographic location, education, and skills/achievements, and will be mutually agreed upon at the time of offer. We offer a highly competitive salary, comprehensive benefits including: medical and dental, vision, disability and life insurance, 401K, PTO, tuition reimbursement, gear discounts and the ability to add value to an exciting mission! Our Postings are not intended for distribution to or use in any jurisdiction, country or territory where such distribution or use would violate local law or would subject us to any regulations in another jurisdiction, country or territory. We reserve the right to limit our Postings in any jurisdiction, country or territory. Equal Opportunity Employer Minorities/Females/Protected Veteran/Disabled **International Traffic in Arms Regulation (ITAR) and Export Administration Regulation (EAR) Requirements:** To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national; (ii) U.S. lawful, permanent resident (a/k/a green card holder); (iii) Refugee under 8 U.S.C. Section 1157; or (iv) Asylee under 8 U.S.C. Section 1158 or be eligible to obtain the required authorizations from the U.S. Department of State. **Gun Control Act Requirements:** It is unlawful for these categories of persons to possess (for business or personal reasons) firearms or ammunition: (i) convicted of a crime punishable by imprisonment for a term exceeding one year; (ii) fugitive from justice; (iii) unlawful user of or addicted to any controlled substance (as defined in section 102 of the Controlled Substance Act 21 U.S.C. 802); (iv) who has been adjudicated as a mental defective or has been committed to any mental institution; (v) illegal alien; (vi) discharged from the Armed Forces under dishonorable conditions; (vii) who has renounced his or her United States Citizenship; (viii) who is subject to a court order restraining the person from harassing, stalking, or threatening an intimate partner or child of the intimate partner; or (ix) who has been convicted of a misdemeanor crime of domestic violence. **Across The Kinetic Group, we rally for the customer** **by fostering collaboration, sharing insights and** **scaling competencies. We engineer our products in** **ways that match the drive of the people who put** **them to work in the field, on the course and on the** **battlefield. We're not just a name on the door - we** **are the people developing the products that help** **customers the world over.** The Kinetic Group is an equal opportunity employer. All applicants are considered for employment without to regard race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, and any other characteristics protected by law. The EEO Law poster is available here: **************************************************************** If you need a reasonable accommodation because of a disability for any part of the employment process, please send an e-mail to ******************* .

Lexicon offers a unique combination of capabilities. Our services include construction management, fabrication, erection, mechanical installation, and plant maintenance for heavy industrial, commercial, and roadway projects, as well as a full spectrum of golf course construction and management services. The Mechanical Engineer will oversee mechanical engineering activities from design through construction and commissioning, ensuring compliance with technical standards, cost, schedule, and safety objectives. Mechanical Engineer Essential Duties and Responsibilities * Project Execution: * Lead mechanical engineering scope for EPC projects from concept to completion. * Develop project specifications, datasheets, material requisitions, and technical bid evaluations. * Coordinate with design, procurement, construction, and commissioning teams. * Engineering Coordination: * Review and approve vendor documents, design drawings, and technical deliverables. * Interface with third-party consultants, vendors, and subcontractors to ensure alignment with project requirements. * Ensure designs comply with project specifications, codes (ASME, API, ISO), and client standards. * Procurement Support: * Assist in the procurement of mechanical equipment including pumps, compressors, tanks, piping, and valves. * Participate in factory acceptance tests (FAT) and technical clarifications. * Construction & Commissioning Support: * Provide site support during installation, testing, and commissioning of mechanical systems. * Assist in resolving field technical queries and non-conformance issues. * Documentation & Reporting: * Prepare engineering progress reports, as-built documentation, and close-out reports. * Maintain up-to-date project documentation and change logs. Mechanical Engineer Qualifications * Bachelor's degree in mechanical engineering (or related field); master's preferred. * 5+ years of experience in EPC projects within oil & gas, power, or heavy industry. * Solid understanding of international mechanical codes and standards (ASME, ANSI, API, etc.). * Proficient in software tools such as AutoCAD, SolidWorks, CAESAR II, and MS Project. * Strong project management, coordination, and communication skills. * Ability to work in a multidisciplinary and multicultural environment. * Professional Engineering License (PE) or equivalent is a plus. * PMP certification is advantageous. * Experience working on mega projects or in international joint ventures. You must be legally authorized to work in the United States for our company without the need for current or future visa sponsorship. Note: The company does not provide employment visa sponsorship. Mechanical Engineer Physical Demands * Requires travel to project sites domestically or internationally as required. * May require extended hours during critical project phases. * All the physical demands listed are essential functions. Benefits * Medical Insurance * HSA with Employer contributions * Dental Insurance * Vision Insurance * Group and Voluntary Life Insurance * Short Term/Long Term Disability * Critical Illness Plan * Employee Assistance Program * Paid Vacation * 401(k) with Employer Match Accessibility: If you need an accommodation as part of the employment process please contact Human Resources at Email: ********************* Drug Free Workplace Equal Opportunity Employer, including disabled and veterans. If you want to view the Know Your Rights: Workplace Discrimination is Illegal poster, please choose your language: English - Spanish - Arabic - Chinese English - Spanish - Chinese To see other positions, click here.

Full-time Description SUMMARY OF RESPONSIBILITIES The Biomedical Engineer/Regional Sales team member is responsible for providing support and services to PTCOA locations as well as external clients. ESSENTIAL FUNCTIONS Ensure the safety, efficiency and effectiveness of biomedical equipment. Provide technical support, repair, and assistance to internal and external clients for biomedical equipment. Delegate project tasks to applicable internal resources and continually monitor and track progress of assigned tasks. Develop and maintain comprehensive project plans to be shared with management and impacted staff members. Track overall project performance, specifically to ensure the successful and timely completion of short-term and long-term tasks. Meet budgetary objectives of project. Report and escalate issues to Administration as needed. Perform risk management analyses to minimize project risks. Ensure that all projects are delivered on-time, within scope and within budget. Receive and respond to requests from team members regarding issues and needs at the Company's leased and owned facilities. This includes the responsibility to monitor the Service Desk requests related to facilities/building issues at all leased and owned facilities. Coordinate service calls, repairs, and other maintenance as needed for PTCOA's leased and owned facilities, while providing excellent customer service. Act as liaison between team members and external parties regarding the Company's leased facilities and serve as point of contact for these facilities. Serves as OSHA safety coordinator for all locations. Performs other related duties as assigned. Requirements REQUIRED EDUCATION, EXPERIENCE AND/OR CERTIFICATIONS The position requires a high school diploma or GED equivalent. Preferred qualifications include an associate or bachelor's degree in a related field and two (2) years of experience in project coordination and/or facilities support. CORE COMPETENCIES Excellent oral and written communication skills. Strong telephone communication skills. Knowledge of current medical terminology to communicate with physician, staff, and patients. High level of attention to detail, ability to problem solve, analyze, and repair equipment. Strong organization, filing, and time management skills. Basic computer literacy and typing. Patient focused. Ability to prioritize and manage multiple tasks without direct supervision. Multi-tasking abilities, along with ability to work well under pressure, prioritize and meet tight deadlines. Must be able to work independently in a fast-paced environment and exhibit strong written and verbal communication skills. Strong customer service and prompt problem-solving skills including the ability to provide diligent, prompt, and courteous responses to inquiries for help or assistance from internal and external clients. Consistently evaluate work completed and determine if further steps are needed to meet client expectations. Take initiative to do to redo inadequate or incomplete work, even if it is not yours. Ensure compliance with regulatory standards. Consistently demonstrate ability to respond to changing situations in a flexible manner in order to meet current needs, such as reprioritizing work as necessary. Minimize non-productive time and fill slow periods with activities that will enable you to prepare to meet the future needs of the company (assisting others). Organize job functions and work area to be able to effectively complete varied assignments within established time frames. Consistently demonstrate ability to take the initiative to make decisions/choices without direct supervision. Adhere to administrative and departmental policies. Demonstrate regular attendance and timeliness. Demonstrate knowledge and understanding of all policies and procedures and ability to reference them from appropriate sources. Demonstrate adherence and support of company-wide service standards as evidenced by observation and feedback from patients, family members, and other clients. WORKING ENVIRONMENT AND PHYSICAL DEMANDS This is a full-time position. Days and hours of work are expected to fluctuate but at a minimum this position will be required to work from 8:00 a.m. to 5:00 p.m. (Monday through Thursday) and 8:00 a.m. to 12:00 p.m. (Friday), and occasionally after regular business hours. Frequent travel will be required. When not traveling, the position operates in a professional office environment and the incumbent, in the course of performing this position, spends time writing, typing, speaking, listening, driving, seeing (such as close, color and peripheral vision, depth perception and adjusted focus), standing, sitting, walking, and reaching. The incumbent operates all standard office equipment, motor vehicles, and mobile phones. The work environment characteristics and physical demands described here are representative of those an employee encounters while performing the essential functions of this job. OTHER The Biomedical Engineer's performance is evaluated by the CFO. PTCOA reserves the right to change this job description at any time according to business needs and/or assign tasks that it may deem appropriate. This document does not represent a contract of employment, and employment with PTCOA may be terminated by the employee or employer at any time, for any reason.

This is a 2026 summer internship in our Engineering department. The intern will create instructions of use for aircraft passenger systems / installations. The instructions are technical in nature but are to be used by non-technical consumers such as a VIP passenger or cabin crew. This candidate will create multi-media instructions for a new aircraft system. The candidate will apply their experience gained in creating content to organize existing content into re-usable modules. Experience gained: technical writing with layout optimization and aesthetics, multi-media production, project management, data continuity, various authoring software tools. PRINCIPAL DUTIES/RESPONSIBILITIES (ESSENTIAL FUNCTIONS): * Understand the technical design and human interface for various components of the aircraft cabin. * Create technical use instructions in non-technical language so that a VIP or cabin crew member may be able to fully utilize aircraft passenger systems and installations. * Create animations and/or videos to augment instructional text. * Identify Cabin Guide content components that may be linked to design data based on engineering part numbers. * Create reusable media templates for Cabin Guide content creation. MINIMUM REQUIRED QUALIFICATIONS: * Technical aptitude. * Strong communication skills. * Proficiency in Adobe Illustrator * Familiar with Adobe FrameMaker * Must be currently enroll in an accredited college or university and must reside in the United States. ADDITIONAL DESIRED QUALIFICATIONS: * Technical Writing, Engineering, User Experience, Interior Design, and/or Communications major preferred COMPENSATION: The compensation for this position is $20.00 per hour. This position is eligible for overtime. We are committed to finding the best, brightest and most dedicated individuals in the aviation industry. Our employees are the key to our success. Soar with us.

JobID: 8635 JobSchedule: Full time JobShift: Day : As a 100% employee-owned contractor, when you work at Sundt, you're not just hiring on at a company, you're joining a culture. Because everyone at Sundt is part owner, you'll join a team of people who are deeply invested in their work. From apprentices to managers, we're passionate about the details and deliberate in everything we do. At Sundt we focus on building long-term prosperity for our clients, communities, and employee-owners. We offer competitive pay, industry-leading benefits including a 401k and employee stock ownership plan, incentive programs for craft and administrative employees as well as training that focuses on your personal and professional growth. We're driven by skill, grit and purpose. Join us as we strive to be the most skilled builder in America. Job Summary Assists the Project Engineer with being the technical source of information for the project. Responds to questions about drawings, specifications, shop drawings, and change orders and have responsibility for assisting in writing change orders, RFl's, meeting minutes, and reviewing Submittals. Maintains an effective and professional working relationship with owners, architects, engineers, subcontractors, and suppliers. This position includes three 'steps' (I, II and Senior), which provide for a progression of skill and experience. Step I is the entry level for individuals with a minimum of experience in this position. Step II is used for employees with 2 years of experience in this position, or with experience on larger and more complex projects. The 'Senior' step is used for employees with more than 4 years of experience and/or experience on significantly larger or more complex projects. Key Responsibilities 1. Assists Project Engineer in developing and maintaining as-built drawings and other work tasks and assists with or reviews and processes submittals, change orders, RFl's, and budget forecasting. Ensures the timely and appropriate generation, collection, distribution, storage, retrieval and ultimate disposition of meeting agendas, RFl's and daily reports. 2. Demonstrates an understanding of the project management plan (PMP) and is involved in support and execution of the plan. Demonstrates a thorough understanding of the change management process and performs project scope activities and supports the project team to ensure the work needed to complete the project successfully. 3. Ensures the administration of the project quality management plan and demonstrates and reinforces a culture of safety throughout the project. 4. May assist in the calculation of daily production rates and unit costs for self-performed work. Participates in risk management including identification, analysis, response planning and monitoring and control on a project and demonstrates competency in understanding the environmental control processes for the project and takes corrective actions when necessary. 5. May be responsible for overseeing/managing the BIM (Building Information Modeling) Coordination between Subcontractors and Designers. 6. May be responsible for the documentation and submittal for the LEED (Leadership in Energy and Environmental Design) Certification of a building and for creating and updating Digital Record Drawings (ORD). 7. May provide lines, grades and layout as required for the project while maintaining an organized log book. 8. May provide the following weekly quantities: maintains accurate quantity logs and reports quantities in compliance with the cost control manual. Completed logs are to be filed with the project files. Perform elements of the processes involved in budgeting and controlling costs so that the project can be completed within the approved budget. Demonstrates business acumen within area of responsibility. (Not all Field Engineers track quantities) 9. Provides support to superintendents required for the execution of the work and assists in the resolution of field problems as necessary. Minimum Job Requirements 1. Ability to assume responsibility, interface and communicate with others is essential. 2. Entry-level position that normally requires a four-year construction-related degree or equivalent technical/field experience. 3. Microsoft Office Suite (Outlook, Word, Excel, PowerPoint, etc.) proficiency. Note: Job Description is subject to change at any time and may include other duties as assigned. Physical Requirements 1. Ability to wear personal protective equipment is required (including but not limited to; steel toed shoes, gloves, safety glasses, hearing protection, hardhat, vest, etc.) 2. May reach above shoulder heights and below the waist on a frequent basis 3. May stoop, kneel, or bend, on an occasional basis 4. May use telephone, computer system, email, or other electronic devices on a limited basis to communicate with internal and external customers or vendors 5. Must be able to comply with all safety standards and procedures 6. Occasionally will climb stairs, ladders, etc. 7. Required to use hands to grasp, lift, handle, carry or feel objects on a frequent basis 8. Will interact with people frequently during a shift/work day 9. Will lift, push or pull objects on an occasional basis 10. Will sit, stand or walk short distances for up to the entire duration of a shift/work day. Safety Level Safety-Sensitive Note: Jobs with the Safety-Sensitive designation are those that include tasks or duties that the employer reasonably believes could affect the safety and health of the employee performing the task or others such as operating a vehicle, operating equipment, operating machinery or power tools, repairing/maintaining the operation of any vehicle/equipment, the handling/disposal/transport of hazardous materials, or the handling/treatment/disposal of potentially flammable/combustible materials. Equal Opportunity Employer Statement: Sundt is committed to the equal treatment of all employees, and/or applicants for employment, and prohibits discrimination based on race, religion, sex (including pregnancy), sexual orientation, gender identity, color, age, disability, national origin, covered veteran status, genetic information; or any other classification protected by applicable Federal, state, or local laws. Benefit list: Market Competitive Salary (paid weekly) Bonus Eligibility based on company, group, and individual performance Employee Stock Ownership Plan & 401K Industry Leading Health Coverage Starting Your First Day Flexible Time Off (FTO) Medical, Health Savings, and Wellness credits Flexible Spending Accounts Employee Assistance Program Workplace Wellness Programs Mental Health Program Life and Disability Insurance Employee-Owner Perks Educational Assistance Sundt Foundation - Charitable Employee-Owner's program #LI-KW1

We are looking for an intern to work with our engineering team at NOV Little Rock. Primary responsibilities of this internship will be to create, revise, and manage technical documentation that is used by our operators on the manufacturing floor. This work is critically important to the safety, quality, and productivity of the plant. Secondary responsibilities will include the following: Supporting a 5S program in the facility - tasks will include sorting, labeling, and working with vendors to develop adequate signage. Recording process cycle times for efficiency review. Supporting field tool production. Other duties as assigned. Job requirements: Excellent written and verbal communication skills including grammar and spelling. High attention to detail. Strong work ethic. Proficiency with Microsoft Word, Power Point, and Excel. Background in engineering as a student and/or in past work experience. Ability to properly use measuring devices such as scales, calipers, and measuring tapes. Perks of the job: Paid position up to 29 hours per week. Exposure to compression molding and filament winding manufacturing techniques. Experience with technical writing, lean manufacturing methods, and real world problem solving.