Engineering associate jobs in Cornwall, NY

Veolia in North America is the top-ranked environmental company in the United States for three consecutive years, and the country's largest private water operator and technology provider as well as hazardous waste and pollution treatment leader. It offers a full spectrum of water, waste, and energy management services, including water and wastewater treatment, commercial and hazardous waste collection and disposal, energy consulting and resource recovery. Veolia helps commercial, industrial, healthcare, higher education and municipality customers throughout North America. Headquartered in Boston, Veolia has more than 10,000 employees working at more than 350 locations across North America. Job Description Position Purpose: Under the direction of Manager of New Business, this person will develop, implement and manage capital improvement projects for transmission, distribution and treatment systems, including preliminary concept development, detailed engineering design, cost-estimations, bidding, construction supervision, start up process, as-built plans, refunds calculations, easement agreements and O&M manuals for all New Business Projects. Responsibilities will include capital project delivery from inception to completion, including preliminary conceptual development, detailed engineering design with support of external engineering consultants; construction cost estimation, procurement, construction administration, supervision and inspection, startup and commissioning, and project closeout documentation delivery, including as-built plans. The Engineer will mainly manage all New Business projects for the Hackensack/Franklin Lakes system. Incumbent will also assist with New Business projects in the Highlands systems located in Passaic and Sussex Counties, in New Jersey as needed. This position will work on both water and wastewater networks; however, the majority of projects and responsibilities are in water. The most critical and unique aspect of this role involves managing complex coordination among diverse internal and external stakeholders and translating Veolia's technical requirements to developers and contractors. Primary Duties/Responsibilities: Manage complex coordination among diverse internal and external stakeholders. Main point of contact for developer-funded main extensions and complicated service installations. Translate Veolia's technical requirements to external stakeholders - developers and contractors. Prepare preliminary, engineering, and detailed cost estimates. Project budget development and cost tracking and expenditure forecasting. Track and report on project expenditures to ensure they are aligned with budget and prioritize projects based on available funding and risk assessment. Manage several projects simultaneously ranging in scope from small to very large. Prepare bid documents and coordinate procurement with supply chain management (SCM) department. Prepare material requisitions forms (MSRs). Prepare funding projects and updating asset data base for newly created assets. Manage pipe condition assessment projects. Provide engineering support (on and off-site) during emergencies and large main breaks and other emergencies. Mainly manage New Business Department new extensions projects. Communicate regularly in written form (email, memoranda, reports, status updates, etc.) and verbally (group meetings, virtual calls, internal presentations, external presentations). Prepare refund calculations for developer-funded water main extensions. Track developments for annual master permit updates. Review / approve all fire suppression calculation reports associated with any new or enlarged fire service. Work independently to manage all capital programs and specific projects for the New Business Department. Work directly with the Operations and T&D group to understand their needs in meeting operational, compliance, and health & safety goals. Manage the design (either internal or external) and construction of small and large New Business Engineering projects. Provide support to the Director of Engineering & Manager of Network Engineering and the Rates Department as needed during the preparation of the rate case filling, DSIC filing as well as responding to the rate case and DSIC interrogatories. Assist the Director of Engineering & Manager of Network Engineering in developing analysis and reports to be provided to regulators, internal or external customers as required. Qualifications Education/Experience/Background: Bachelor's Degree in Civil/Environmental Engineering. Strong experience and expertise in Network Engineering utility projects and project management is required for this role. Experience in managing Network Engineering utility projects projects. Experience in managing and adhering to project budgets and schedules. ESRI/GIS, PowerPlan, INFOR/Hexagon experience is a plus. Hydraulic Modeling experience is a plus. Strong experience and expertise in Network Engineering utility projects and project management is required for this role. 1-3 years of engineering experience in related field. Knowledge/Skills/Abilities: Possesses broad knowledge of multiple processes and/or engineering disciplines, augmented with good experience and seasoning, to the point where he/she can address complex projects or address complex challenges, such as leading a response to an emergency. Must be able to propose capital projects, or identify other work that will benefit VEOLIA and/or its customers, based on their expertise in one or more areas. Excellent analytical, organizational, computer and interpersonal skills. Exercise discretion and independent judgment. Extensive Knowledge of Microsoft Office applications. Proficiency in Microsoft Excel is necessary. Required Certification/Licenses/Training: Engineer in Training certificate is a must. Project Management Professional (PMP) Certification is a plus. Additional Information Pay Range: $70000 to $80000 per year. Benefits: Veolia's comprehensive benefits package includes paid time off policies, as well as health, dental, vision, life insurance, savings accounts, tuition reimbursement, paid volunteering and more. In addition, employees are also entitled to participate in an employer sponsored 401(k) plan, to save for retirement. Pay and benefits for employees represented by a union are outlined in their collective bargaining agreement. Sick leave - 56 hours; Observed Holidays - 11 days; Vacation - Flexible Time Off Eligible for up to 5% Annual Performance Bonus We are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. Disclaimer: The salary, other compensation, and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, subject to applicable law.

Job Description Kickstart Your Career with an Internship at CPL Are you a student eager to turn classroom learning into real-world impact? At CPL, a nationally recognized Architecture & Engineering firm, we believe in empowering the next generation of designers, engineers, and innovators. Our internship program is your opportunity to gain hands-on experience, collaborate with seasoned professionals, and contribute to projects that shape communities. Why Intern with Us? Real Projects, Real Impact - Work on meaningful assignments that go beyond “busy work.” Mentorship & Learning - Learn from industry experts who are invested in your growth. Collaborative Culture - Join a team that values creativity, curiosity, and fresh perspectives. Career Pathways - Explore your future in architecture, engineering, planning, design, or project management. Who We're Looking For We welcome students from all backgrounds of study-Architecture, Engineering (MEP and Civil), Interior Design, and related fields-who are: Curious, motivated, and eager to learn. Excited to bring their ideas to the table. Ready to embrace teamwork and new challenges. Day-to-Day Responsibilities As a Mechanical Intern, your daily activities will involve a mix of technical design work, collaboration, and learning opportunities. Typical tasks include: Design Support: Use Revit to create and update 3D models of HVAC systems, ensuring accurate layouts and coordination with other building systems. Load Calculations: Perform heating and cooling load calculations using Carrier HAP software to support system sizing and energy efficiency analysis. Documentation: Assist in preparing technical drawings, schedules, and specifications for project deliverables. Team Collaboration: Review design progress, and communicate with engineers and project managers to align on requirements. Site Exposure: Participate in occasional site visits to observe installations, verify design implementation, and learn troubleshooting techniques. Research & Learning: Explore new HVAC technologies, sustainability practices, and energy-saving strategies to contribute innovative ideas to the team. How to Get Involved We're now collecting registrations of interest for upcoming internship opportunities. If you want to grow your skills, build your network, and make a tangible difference, we'd love to hear from you! ???? Apply now to register your interest and be among the first to hear about our internship openings. Be part of something bigger. Start your journey with CPL today. LEARN MORE CPL is proud to be not only an equal opportunity employer, but a diverse and motivating place to work. Visit our website (that's cplteam.com) to see what we're all about.

Introduction At IBM, work is more than a job - it's a calling: To build. To design. To code. To consult. To think along with clients and sell. To make markets. To invent. To collaborate. Not just to do something better, but to attempt things you've never thought possible. Are you ready to lead in this new era of technology and solve some of the world's most challenging problems? If so, lets talk. Your role and responsibilities IBM is seeking a motivated and detail-oriented IT Administrator Intern with an interest in Site Reliability Engineering (SRE) to join our team. This internship offers hands-on experience in enterprise IT systems management while introducing you to modern reliability engineering practices. You'll work alongside experienced professionals to support infrastructure operations and contribute to automation and performance initiatives. Your Role and Responsibilities•Assist in maintaining and supporting enterprise IT systems including servers, virtual machines, and cloud environments.•Monitor system performance and help identify reliability issues.•Support automation efforts for routine administrative tasks using scripting tools.•Participate in incident response and post-incident analysis.•Help document system configurations, operational procedures, and reliability metrics.•Collaborate with cross-functional teams on infrastructure and service delivery Required education High School Diploma/GED Preferred education Bachelor's Degree Required technical and professional expertise * Currently pursuing a degree in Computer Science, Information Technology, or a related field.•Basic understanding of operating systems (Linux, Unix, Windows, z/OS, zVM) and networking fundamentals.•Familiarity with scripting languages (e.g., Python, Bash).•Strong analytical and problem-solving skills.•Effective communication and collaboration abilities. Preferred technical and professional experience * Exposure to cloud platforms (IBM Cloud, AWS, Azure).•Interest in SRE principles such as automation, observability, and fault tolerance.•Familiarity with monitoring tools (e.g., Grafana, Prometheus).•Experience with version control systems (e.g., Git) and CI/CD concepts. ABOUT BUSINESS UNIT IBM Systems helps IT leaders think differently about their infrastructure. IBM servers and storage are no longer inanimate - they can understand, reason, and learn so our clients can innovate while avoiding IT issues. Our systems power the world's most important industries and our clients are the architects of the future. Join us to help build our leading-edge technology portfolio designed for cognitive business and optimized for cloud computing. YOUR LIFE @ IBM In a world where technology never stands still, we understand that, dedication to our clients success, innovation that matters, and trust and personal responsibility in all our relationships, lives in what we do as IBMers as we strive to be the catalyst that makes the world work better. Being an IBMer means you'll be able to learn and develop yourself and your career, you'll be encouraged to be courageous and experiment everyday, all whilst having continuous trust and support in an environment where everyone can thrive whatever their personal or professional background. Our IBMers are growth minded, always staying curious, open to feedback and learning new information and skills to constantly transform themselves and our company. They are trusted to provide on-going feedback to help other IBMers grow, as well as collaborate with colleagues keeping in mind a team focused approach to include different perspectives to drive exceptional outcomes for our customers. The courage our IBMers have to make critical decisions everyday is essential to IBM becoming the catalyst for progress, always embracing challenges with resources they have to hand, a can-do attitude and always striving for an outcome focused approach within everything that they do. Are you ready to be an IBMer? ABOUT IBM IBM's greatest invention is the IBMer. We believe that through the application of intelligence, reason and science, we can improve business, society and the human condition, bringing the power of an open hybrid cloud and AI strategy to life for our clients and partners around the world. Restlessly reinventing since 1911, we are not only one of the largest corporate organizations in the world, we're also one of the biggest technology and consulting employers, with many of the Fortune 500 companies relying on the IBM Cloud to run their business. At IBM, we pride ourselves on being an early adopter of artificial intelligence, quantum computing and blockchain. Now it's time for you to join us on our journey to being a responsible technology innovator and a force for good in the world. IBM is proud to be an equal-opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender, gender identity or expression, sexual orientation, national origin, genetics, pregnancy, disability, neurodivergence, age, or other characteristics protected by the applicable law. IBM is also committed to compliance with all fair employment practices regarding citizenship and immigration status. OTHER RELEVANT JOB DETAILS IBM will not be providing visa sponsorship for this position now or in the future. Therefore, in order to be considered for this position, you must have the ability to work without a need for current or future visa sponsorship. The compensation range and benefits for this position are based on a full-time schedule for a full calendar year. The salary will vary depending on your job-related skills, experience and location. Pay increment and frequency of pay will be in accordance with employment classification and applicable laws. For part time roles, your compensation and benefits will be adjusted to reflect your hours. Benefits may be pro-rated for those who start working during the calendar year.

ARKA Group L.P. (“ARKA”) is an advanced technologies company serving the U.S. military, intelligence community, and commercial space industry delivering next-generation solutions to support the national security space enterprise. Built on more than six decades of excellence, ARKA brings modern approaches and a culture of innovation to the challenges of today. Join the ARKA team to learn how Beyond Begins Here. Discover your next career opportunity now! Position Overview: Our Student Program provides amazing opportunities to develop functional job skills and gain real-world experience and expertise. We offer spring, fall and year-round internships and co-ops in fields across the company, including engineering, finance, and business development. We are currently seeking a student enrolled in Henry Abbot Technical School in the Mechanical Design and Engineering Technology program to join our Engineering department as a Year-round Intern. Responsibilities: This position requires an entry level designer/drafter to apply technical skills for moderate complexity interdisciplinary tasks. You will be responsible for producing tooling and related flight hardware within an integrated product team It is expected you will work autonomously with moderate oversight and be accountable for both space flight and non-space flight development program milestone deliverables Basic Qualifications: Enrollment in Henry Abbot Technical School in the Mechanical Design and Engineering Technology program Create part models, assembly layouts, detailed drawings, and bills of materials using CREO for solid modeling and PDMLink for data management Execute engineering design changes for part and assembly drawings Interact and coordinate with all engineering disciplines to deliver comprehensive design, engineering, and specification packages Preferred Qualifications: General understanding of GD&T Location: Danbury, CT This position is based onsite at our facility in Danbury, CT. Located in beautiful Fairfield County, Danbury offers a diverse economy, wonderful parks, cultural attractions, an impressive mix of private and public educational institutions and a vibrant arts scene. Our facility is nestled among a remarkable selection of communities to call home all with varying price points to fit many different budgets. We're close to New York City, Boston, and other major cities - great for day trips and weekend getaways. Our lovely seasons along with award-winning institutions, colleges, cultural events, and a genuine sense of community brings a diverse population to the beautiful state of Connecticut! When you choose to join the ARKA Student Program, you will: Gain hands-on experience in your chosen field and share your unique ideas and creative problem-solving skills to help us continue our legacy of innovation Flourish and seamlessly develop great relationships with co-workers Network with students from other universities Participate in activities that support our local communities Work alongside our talented team, including employees who started as interns or co-ops Enjoy companywide employee activities Receive competitive compensation and paid holidays EHS/Environmental Requirements: This job operates in a professional office environment. While performing the duties of this job, the employee routinely is required to use hands to keyboard, communicate, listen to, and interpret instructions and remain stationary for extended periods of the time. This would require the ability to move around the campus and occasionally move/lift items weighing up to 25 lbs. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the job. Applicants are invited to apply for a reasonable accommodation to perform the essential duties of the job. To apply, send a request to ***************** or contact ************ and press 2 for Human Resources. ITC & Security Clearance Requirements: This position requires the incumbent to access export-controlled information. If you are not a U.S. Person, any offer is contingent upon the Company's ability to obtain a special license granting you access. This could take several months. You will not be able to begin employment until such license is obtained. Visa Restrictions: No visa sponsorship is available for this position. Pre-employment Screenings: Employment with any ARKA companies in the U.S. is contingent upon satisfactory completion of several pre-employment requirements to include a credit check, background check, and drug screen.

Arcadis is the world's leading company delivering sustainable design, engineering, and consultancy solutions for natural and built assets. We are more than 36,000 people, in over 70 countries, dedicated to improving quality of life. Everyone has an important role to play. With the power of many curious minds, together we can solve the world's most complex challenges and deliver more impact together. Role description: We are currently searching for a Water Engineer Intern to support our team in Paramus, NJ. We are looking for dedicated, creative, and energetic candidates interested in tackling challenges and developing sustainable solutions to address water issues. Collaborating with our experienced water professionals, you will support and drive the development of projects, interact, and work with clients, and develop your technical capabilities. Role accountabilities: The Water Engineer Intern will possess a strong foundation in engineering concepts and theories related to climate resilience and stormwater management. You will need to have technical aptitude and be familiar with various software tools such as ArcGIS, AutoCAD, HEC-RAS, HEC-HMS, SWMM, and PowerBI, which are beneficial for project work. You will need to be skilled in evaluating, planning, designing, and supporting the management of projects involving stormwater management, green infrastructure, climate adaptation, and design of nature-based solutions. Additionally, you will need to provide valuable support in project management efforts including managing project scopes, budgets, and client deliverables. In addition, the following will be expected of the Water Engineering Intern: Assess, develop, and support management of sustainability, stormwater management, and resilience projects. Exercise judgment on details of work and in making preliminary selections and adaptations of engineering alternatives Perform fieldwork activities such as site visits and construction inspection. Support collection and analysis of data including statistical analysis, analytics, research and synthesis. Attend outreach activities and external meetings related to climate adaptation and stormwater management projects. Prepare reports, presentations, and other audio-visual materials, and participate in client meetings. Use digital tools to enhance customer experience, team and client collaboration, and project delivery including configuration and deployment of SharePoint, Power BI, and Augmented Reality, as well as designing and managing databases and cloud-based computing services Qualifications & Experience: Required Qualifications: Pursuing a Bachelor's degree in Civil or Environmental Engineering (or a closely related engineering discipline) Preferred Qualifications: Prior work/internship experience at a design or consulting engineering firm or municipal work environment Familiarity/ experience with CAD, AutoCAD, Revit Why Arcadis? We can only achieve our goals when everyone is empowered to be their best. We believe everyone's contribution matters. It's why we are pioneering a skills-based approach, where you can harness your unique experience and expertise to carve your career path and maximize the impact we can make together. You'll do meaningful work, and no matter what role, you'll be helping to deliver sustainable solutions for a more prosperous planet. Make your mark, on your career, your colleagues, your clients, your life and the world around you. Together, we can create a lasting legacy. Join Arcadis. Create a Legacy. Our Commitment to Equality, Diversity, Inclusion & Belonging We want you to be able to bring your best self to work every day which is why we take equality and inclusion seriously and hold ourselves to account for our actions. Our ambition is to be an employer of choice and provide a great place to work for all our people. We are an equal opportunity and affirmative action employer. Women, minorities, people with disabilities and veterans are strongly encouraged to apply. We are dedicated to a policy of non-discrimination in employment on any basis including race, creed, color, religion, national origin, sex, age, disability, marital status, sexual orientation, gender identity, citizenship status, disability, veteran status, or any other basis prohibited by law. Arcadis offers benefits for part-time, as needed positions. These benefits include EAP, 401K, and optional well being benefits. The salary range for this position is $25.81 - $38.72 / per hour. #LI-TB1 #EarlyCareersANA #Resilience-ANA #WATER-ANA #LI-HYBRID #SWE #WEPAN #AWIS #INWES #BWEC #NSBE #SHPE #AISES #oSTEM #SAME #SASE

About Us: Safe Flight, a leader in aviation safety and flight performance systems, was founded in 1946. The company pioneered the development of Stall Warning and Angle of Attack, Automatic Throttle Systems, Wind Shear Warning, and many other innovations in aircraft instrumentation, flight performance, and control systems for fixed and rotary winged aircraft. With product installed on over two-thirds of the world's aircraft, Safe Flight counts among its customers the majority of the world's aircraft manufacturers, more than 50 airlines, hundreds of operators of corporate jet aircraft and U.S. and International Armed Services. Safe Flight's benefits include employer-funded health care, on-site lunch program, 401K contribution, Wellness and Education Reimbursement, paid-time off and sick time, and various other programs. Duties/Responsibilities: Build test sets and cable assemblies from schematics and assembly drawings utilizing hole and SMT technology. Assist engineering in construction and rework of electromechanical prototypes. Perform routine calibration of electronic instruments and coordinate outside calibration for equipment that cannot be calibrated in-house. Work with engineering to troubleshoot equipment. Perform other related duties as assigned. Required Skills/Abilities: Associate degree in electronics, avionics, or a related field with a basic understanding of electronic circuit theory. Comfortable reading and editing schematics and drawings. Proficient in using computers with a strong drive to learn new tools to work effectively with engineering. Experience as an electronics technician in an ISO or AS9100 facility is preferred. Equal Opportunity Employer/Veterans/Disabled An Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, or protected veteran status and will not be discriminated against on the basis of disability.

Fleet Engineer The Fleet Engineer supports the Assistant Port Engineer in the maintenance, repair, and regulatory compliance of all American Cruise Lines' (ACL) certificated vessels and launches. The Fleet Engineer provides immediate response for critical repairs to the portion of the ACL fleet assigned, to ensure the vessels remains safe and on schedule. The Fleet Engineer must be familiar with all vessel machinery, equipment and systems. This individual is responsible for following established safety practices while performing assigned duties to protect self, workers, and the public from personal injury and to prevent damage to ACL's property and the environment. This position reports directly to the regional Assistant Port Engineer. Responsibilities: * Take supervision and direction from the Assistant Port Engineer and Port Engineer. * Provides support and coverage to Assistant Port Engineers. * Identifies and troubleshoots technical vessel problems and provides fast solutions to minimize downtime. * Expedites vendors for critical repairs. * Coordinates and communicates with Marine Operations for critical repairs and determines a timeline for resolution. * Manages warranties and coordinates extended warranties for technical equipment. * Ensures competitive bidding and negotiates costs on purchases. * Manages expenses and assists with the annual winter maintenance budget. * Maintains responsibility for record keeping, including machinery history, parts inventory and reporting data to the Assistant Port Engineer. * Coordinates large scale projects such as ship refits and dry dockings. * Visits each ship at least three times a month. One of these visits shall include a full ship condition inspection. * Provides technical information and guidance to shipboard Engineers and crew directly, as directed by the Assistant Port Engineers. * Interfaces with Marine Operations and Hotel Operations. * Ensures vessel compliance with all USCG, USPH, FDA, EPA, and other federal regulations * Performs other duties as directed. Attributes for Success: * Ability to identify, manage, and solve problems. * Ability to act with urgency to completed time sensitive tasks. * The ability to diagnose machinery malfunctions and recommend a course of corrective action. * Ability to read and understand blueprints and machinery systems' technical manuals. * The ability to work on various computer programs including Microsoft word, Excel and HelmConnect. * Ability to read and understand repair manuals. * Mechanically inclined. * Proficient with hand and power tools. * Knowledgeable of diesel and gas engines. * Ability to learn and take direction from port engineer. Licenses and Registrations: * Valid driver's license. * Possess a Valid TWIC (Transportation Worker Identification Card). Required Education and Experience: * Must be at least 18 years old. * High school diploma or equivalent or equivalent related experience. Typical Work Environments: * This position includes a high level of travel to Fleet concentration areas. * Frequently underway time for short durations performing, testing, inspections, ship checks, and other events as needed. Travel up to 80% of the time. * Vendor maintenance shops, paint shop, various buildings and storage areas. * Vessel engine room, bow thruster space and various void spaces throughout vessel. Additional Requirements: * Subject to a background investigation. * Subject to a pre-employment physical. * Ability to frequently traverse stairs, fixed ladders and ladder-wells while walking ships on a daily basis. * Wherewithal to spend several consecutive days at sea while underway as needed. * Capable of sitting for long periods of time, standing, walking, crouching and kneeling. * Reaching, handling, using equipment, keyboards and mobile devices. * Lifting boxes (files and supplies) up to 20 lb.

Job Description Entry-Level Field Engineer The successful candidate for this entry-level position will be assigned to work on a project site, under the supervision of the Project Manager and Superintendent on the job. Responsibilities include the following: Survey layout of control lines and establish various locations in relation to property lines. Interpret drawings and assist construction supervision and trades personnel in maintaining adherence to locations, dimensions and specifications. Perform as-built survey of work in place, including generating electronic records. Estimate quantity of materials and related items for various aspects of the work. Quality control oversight of the work of various trades as required by project specifications. Work with and assist subcontractors in following drawings, specifications, quality standards, and in coordinating details of scheduling. Maintain effective communication with construction supervision, architects, and engineers. Execute company safety requirements including daily site inspection for conformance with the company safety policy and OSHA standards Maintain project records and manpower reports. Update contract documents to reflect all supplemental information issued by the design team. Requirements: A four year degree in Construction Management, Civil Engineering or related curriculum $70,000.00 annually for Field Engineers Field Engineer Pay$70,000-$75,000 USD

About the Company: Aerolase is the fastest growing medical laser company, serving the high growth dermatology and aesthetic laser market. Nestled in the picturesque Hudson Valley in Tarrytown, NY, the location is also ideal for access to NY City and other areas of the Northeast and Mid-Atlantic U.S. We are hiring in many areas and currently seek laser optical engineering technicians with a passion for creating new things. The company offers a friendly, team-oriented work environment and competitive compensation including salary, bonus, stock options, 401k, and health/dental/life insurance plans. About the Team: • We are a diverse team of friendly, creative hard-working people with a passion for achieving our objectives • We are creative, hands-on and innovative with a strong orientation toward high customer satisfaction • We have created a very team-spirited company culture and believe it is important to have open and effective cross-functional collaboration and communications - and enjoy our work! About the role: We're looking for an enthusiastic, creative and detail-oriented problem solver to help support the production, service and repair of our unique solid-state laser devices. Must have expertise working hands-on with assembly and/or development of small, sensitive, high precision instruments, preferably solid-state laser technology, with a high caliber technology company. We prefer design and hands-on experience in multiple laser technologies including solid state lasers, semiconductor lasers, non-linear optical materials and devices, optical benches, and beam directors. Experience with the technical aspects of developing laser and laser-based products is preferred. Candidates should have proven ability to address complex challenges with ingenuity and innovation, and capability to work independently to manage multiple simultaneous tasks, and see all tasks to completion. Also should have the ability to work well in a collaborative multidisciplinary team environment, define and analyze system performance specifications, and ensure adherence to those specifications in the application environment. Responsibilities: • Test, troubleshoot repair and assemble lasers, subassemblies and various components, including high-voltage laser power supplies and other electronics. • Support the development and implementation of test fixtures, equipment, procedures and documentation for the engineering and operations functions. • Support product design and development activities related to new products and product improvements. • Support development and maintenance of quality and regulatory documents and procedures. • Maintain thorough, complete and accurate written records; comply fully with the company's quality system and any regulatory requirements. • Follow safety rules for working with high-voltages and high-power lasers. • Perform other duties as completion of responsibilities necessitates or as assigned by supervisor. Skills and Experience: 1. Minimum 1-3 years of experience in a technical role involving high power pulsed power supplies. 2. Understanding of system, board and component design, testing and troubleshooting. 3. Theoretical and practical knowledge and skills of adequate policies and procedures for the control of laser hazards and high voltage hazards, using relevant protective equipment, ensuring adequate safety education and training of other personnel. 4. Enjoy working with your hands/mechanical ability. 5. Strong analytical and problem solving skills. 6. Proven technical and project management skills. 7. Experience with manufacturing within a Quality Management System (especially medical). 8. Strong interpersonal and communication skills. 9. Self-motivated, detail oriented and well organized. Ability to make decisions and work independently Strong work ethic and desire to help the company successful by producing a reliable product. 10. Not afraid to ask questions and make suggestions for improvement. 11. Be able to work under pressure due to customer demands. 12. Strong computer skills (Windows™ software). 13. Ability to successfully manage multiple projects and daily responsibilities. Ability to discern and appropriately communicate sensitive issues. 14. Ability to walk, stand, bend, reach, stoop/squat, and crouch. Ability to carry heavy items. Educational Requirements: 15. A.S. or higher in technical discipline, optical engineering preferred

The purpose of the internship is to provide meaningful professional hands-on experience to students with leadership potential and proven academic performance. Werfen hires students majoring in Engineering and Life Sciences fields into this internship program based on business need. Ideal candidates will combine technical and business knowledge with analytical strength and creative problem-solving abilities. Responsibilities Position Description To perform entry level work of a routine nature requiring application of standard techniques, procedures and criteria in carrying out a sequence of related tasks. Design and install new plexiglass guards on equipment Utilize SAP for spare parts management Scope, plan and execute Engineering Change Order requests issued internally. Requests include improvements of manufacturing efficiencies, implementation of engineering changes, improvements of product quality, and resolution of technical issues in a production line Perform element of a Process Validation (IQ/OQ/PQ). Participate in activities related to new Product Introductions The Intern will be involved in the day-to-day activities of the team included aiding other departments as they relate to department projects. We expect the intern to gain an in-depth knowledge of the product and its associated processes, particularly the process activities in-which they will be directly involved. The intern will have opportunities to assist in nearly all aspects of the workflow. Key Attributes Requires confidence in using Microsoft Word and Excel tools. Requires Enthusiasm, motivation, initiative and ability to work within an interactive and energetic workplace. Review process procedures, change orders, equipment specifications, validation plans, and reports. Performs research on technology, equipment and tooling to improve process quality, yield or cost. Generates proposals based on research. Assistance in creating, reviewing and maintaining department files. Performs experiments, analyzes and interprets numerical data from experiments. Summarizes findings by computer readouts, statistical summaries, graphs and other methods. Qualifications Minimum Knowledge & Experience Required for the Position: Currently pursuing B.S. in Engineering with a minimum of 2 college semesters complete. Ability to multitask. The hourly wage range Werfen reasonably expects to pay for the position is $21 to $26. Compensation is reasonably based upon multiple factors including education, relevant experience, skillset, knowledge, and specific needs of the business.

JOB TITLE: Engineering Technician TYPE: Full time, regular COMPENSATION: $29.00/hr $36.00/hr Clarapath is a medical robotics company based in Westchester County, NY. Our mission is to transform and modernize laboratory workflows with the goal of improving patient care, decreasing costs, and enhancing the quality and consistency of laboratory processes. SectionStar by Clarapath is a ground-breaking electro-mechanical system designed to elevate and automate the workflow in histology laboratories and provide pathologists with the tissue samples they need to make the most accurate diagnoses. Through the use of innovative technology, data, and precision analytics, Clarapath is paving the way for a new era of laboratory medicine. Role Summary: The Engineering Technician will be working on medical device development and integration as part of a tight knit team. This role is multi-disciplinary with responsibility for assembling mechanical, electro-mechanical, and optical subassemblies and integrating them into the final flag-ship product. In addition, the candidate should be able to assemble, install and troubleshoot wiring components, having a strong understanding of electrical systems. The ideal candidate should have experience working in a fast-paced manufacturing environment. Responsibilities : Operate manufacturing equipment and machinery according to established procedures and safety guidelines Interpret standard work instructions, technical diagrams, schematics, and blueprints to build and troubleshoot multiple assemblies Perform precision assembly tasks using a variety of methods, including hardware such as screws, bolts, and fasteners, as well as adhesives, to ensure accurate and secure assembly of components Perform the installation, routing, and termination of electrical wiring systems according to design specifications and industry standards Utilize a variety of hand and power tools to cut, strip, crimp, and connect wires and cables Conduct quality control inspections at various stages of the production process to ensure product integrity and adherence to standards Troubleshoot equipment malfunctions and electrical systems to identify and resolve issues efficiently Work with computers and software to operate, monitor, and troubleshoot automated test equipment and diagnostic systems Perform routine maintenance tasks to keep machinery in optimal condition Collaborate with engineers, other team members and supervisors to identify, troubleshoot, and resolve issues related to product assembly and wiring configurations Adhere to all company policies and procedures, including those related to safety, quality, and regulatory compliance Qualifications : High school diploma or equivalent required; associate degree, technical certification or vocational training preferred 3+ years of manufacturing experience, medical device, electro-mechanical, or optical experience Ability to read, interpret and follow industry standards and internal work instructions, specifications, and engineering drawings Experience with computer systems and software applications used to control, run, and diagnose engineering test equipment. Familiarity with operating machinery and tools used in production processes Proficiency in reading and interpreting technical diagrams, schematics, and blueprints Strong knowledge of electrical wiring principles, techniques, and safety standards Strong attention to detail and commitment to producing high-quality work Excellent problem-solving and mechanical aptitude Effective communication skills and ability to work well in a team environment Flexibility to work in fast-paced environment and adapt to changing project requirements Familiarity with ISO 13485 standards, a plus Company Offers: Competitive salary, commensurate with experience and education Comprehensive benefits package available: (healthcare, vision, dental and life insurances; 401k; PTO and holidays) A collaborative and diverse work environment where our teams thrive on solving complex challenges Ability to file IP with the company Connections with world class researchers and their laboratories Collaboration with strategic leaders in healthcare and pharmaceutical world A mission driven organization where every team member will be responsible for changing the standards of delivering healthcare Clarapath is proud to be an equal opportunity employer. We are committed to providing equal employment opportunities to all employees and applicants for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status. In addition to federal law requirements, Clarapath complies with applicable state and local laws governing nondiscrimination in employment. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.

Job Description Description/Comment: ****HYBRID**** Hours: 8:00am to 5:00pm This function will be directly supporting the EUMDR project on Site. Requirements: Education and Special Training Required: Bachelors Degree in Engineering or relevant field of study Qualifications and Work Experience Required 1-3 years experience in a production/manufacturing environment. Demonstrated computer skills using Microsoft Office applications (Word, Excel, PowerPoint, Project, etc), and experienced work in a Quality Management System and UDI/MDD/MDR/UKCA Regulatory Compliance project experience is preferred. Demonstrated interpersonal, communication and presentation skills. Must be comfortable presenting at team level meetings and lead meetings as necessary. Demonstrate strong teamwork and time management skills as well as be able to operate in a fast-paced environment. Ability to perform in and be challenged by a multi-disciplinary team-based environment, which places a high degree of emphasis on accountability for quality/GMP/GDP compliance. Provide technical support for quality control, process improvement, equipment qualifications, and process validations. Operate within s quality management system (QMS) to produce and/or review documentation such as, inspection guide sheets, product drawings, dynamic control plans (DCPs), and standard operating procedures (SOPs) Additional Job Details: Periodically work independently with vendors. 2D drawing & GD&T knowledge or experience. Create and manage Engineering Change Requests as well as product impact assessments. Manage Engineering Change Notices for process changes from creation to final approval Demonstrate a general understanding of Product Part Approval Process (PPAP) Demonstrate a general understanding of First Article Inspection (FAI) process Periodically lead projects and processes; work with cross-functional teams to get these projects completed. Ability to multi-task between different projects and changes. Investigate Quality issues for root cause and recommend/implement corrective actions. Ability to oversee team members workload and provide support when issues arise. Work to support team members as both mentor/mentee when necessary.

**_About_** **_this_** **_Position_** At Henkel, you'll be part of an organization that's shaping the future through innovation, sustainability and collaboration. With our trusted brands like Persil , 'all , Dial , Snuggle , and Schwarzkopf and our cutting-edge technologies, you'll have countless opportunities to explore new paths and grow. This position is with our Consumer Brands business unit - where we empower our employees to bring the best Laundry & Home Care and Hair products to people around the world. **Dare to learn new skills, advance in your career and make an impact at Henkel.** **What you'll do** + Collaborate with cross-functional teams to support the development and launch of new packaging solutions + Test new packaging components to ensure compliance with performance and regulatory standards + Assist engineers with daily tasks related to packaging development and validation + Write and maintain packaging specifications and documentation + Support packaging-related project activities and timelines + Contribute to continuous improvement initiatives in packaging processes and systems **What makes you a good fit** + An undergraduate student (sophomore, junior, senior) pursuing a degree in Packaging Engineering. + Packaging Knowledge: Foundational understanding of packaging materials, formats, and processes. + Communication & Collaboration: Comfortable working across teams and effectively communicating with stakeholders at all levels. + Adaptability & Learning Agility: Eager to take on new challenges, quickly learn new systems, and apply knowledge to real-world projects. + Technical Skills: Proficient in Microsoft Office Suite (Excel, Word, PowerPoint); exposure to pallet design software such as CAPE or TOPS is a plus. **Some benefits of joining Henkel as an intern** + Exciting projects that allow you to make real impact and collaborate with Henkel colleagues worldwide. + Countless learning opportunities available through Henkel's online learning platform with over 9,000 professional courses. + Networking events with Henkel business leaders, experts and sustainability ambassadors. + Ongoing feedback discussions throughout the internship that allow you to accomplish concrete goals. + In-person and virtual social events to connect with other Henkel interns across the country. **Following your internship, you may be invited to join Henkel as a returning intern or full-time employee. ** **Additional information** + This internship is eligible for a housing stipend or relocation support. + The anticipated start date for this internship is June 15, 2026, and the anticipated end date is December 18, 2026. + Recruitment for our 2026 internships starts in late August 2025 and runs through early March 2026 or until all our positions are filled. + If selected to move forward in our recruitment process, you will receive an email from our talent acquisition team. + If a position you applied to is filled by another candidate, you will receive an email from our team alerting you that the position is closed. The salary for this role is $22-$27/hour. This is the range that we in good faith anticipate relying on when setting wages for this position. We may ultimately pay more or less than the posted range and this range. This salary range may also be modified in the future. Henkel is an equal opportunity employer. We evaluate qualified applicants without regard to race, color, religion, sex, age, national origin, disability, veteran status, genetic information, and other legally protected categories. **JOB ID:** req75278 **Job Locations:** United States, CT, Darien, CT | United States, CT, Stamford, CT | United States, CT, Trumbull, CT **Contact information for application-related questions:** ***************************** Please do not use this email address for sending your application or CV. To apply, please click on the "Apply for this role" button below. Applications sent via e-mail will not be accepted. **Application Deadline:** As long as the vacancy is listed on our Career Site, we are happy to receive your application **Job-Center:** If you have an application already, you can create or log in to your accounthere (******************************************************************************************************************************************************** to check the status of your application. In case of new account creation, please use your email address that you applied with. Activate external content When clicking the button below external content will be loaded which involves transfer of personal data (e.g. IP address) to external servers. This may involve that cookies are set by the external content provider. Please see Data Protection Statement for further information. **Accept for all YouTube content** Deactivate loading external content from YouTube. How is work at Henkel

Salary: $ 70,000.00 We have partnered with a manufacturing company in Mahwah, NJ to provide them with a Engineering Technician. Please review the below description and let us know if you are interested. Prioritized Must Have Skills for the Engineering Technician: #1. Technical School Degree or Associates required, Bachelors degree in Engineering a plus #2. Ability to use basic power tools #3. Ability to do basic prototyping #4. Prior experience with building and disassembling small products #5. CAD not required, but prior experience is a plus Responsibilities of the Engineering Technician: The Engineering Technician will aid the Product Development team by working with physical products in the testing lab. Daily tasks include disassembling products and running test procedures and assisting the engineering team with fabrication. The ideal candidate is organized with multiple projects, thorough in detail-oriented tasks, and possesses a friendly personality. Role & Responsibilities Work with Engineering team to help with fabrication and test setups. Disassembling competitors products for technical evaluation Work with Systems programmers to develop new product systems parameters and evaluation of system functionalities. Evaluating client products with test procedures after disassembly Requirements of the Engineering Technician: Determining and performing tests needed for the analysis and report Recording tests and analyses and then reporting the results Discussing and answering any questions regarding the results Organizing and storing samples Cleaning and maintaining lab equipment, including recalibration of equipment Staying current on technical and scientific advances in their field Technical School Degree or Associates required, Bachelors degree in Engineering a plus Ability to use basic power tools Ability to do basic prototyping Prior experience with building and disassembling small products CAD not required, but prior experience is a plus Microsoft Office proficient Other Key Requirements for the Engineering Technician: Onsite role. No sponsorships or visa holders. No Corp-to-Corp. Benefits of the Engineering Technician: Medical Insurance Dental Insurance Life Insurance Disability Insurance 401(k) plan About the Company: Cyfle is a global business dedicated to connecting talents worldwide. Our comprehensive RPO services, placement services, and training services help businesses unlock their full potential.

Visit PDF for full description: ************ cityofwhiteplains. com/DocumentCenter/View/11402/Engineering-Technician

We're Watts. Together, we're reimagining the future of water. We feel proud every day about what we do. We're all part of the same crucial mission, no matter what function we support -- it's to provide safe, clean water for the world, and to protect our planet's most valuable resource. What we do: For 150 years, Watts has built best-in-class products that are trusted by customers in residential and commercial settings across the world. We are at the forefront of innovation, working with cutting-edge technology to provide smart and connected, sustainable water solutions for the future. Watts is a leading brand with a quality reputation - and we have a dynamic future ahead. The Watts Internship Program is your chance to bring what you've learned in the classroom to life! You'll dive into real-world projects, gaining hands-on experience while learning how business really works from the inside. During the program, you'll get to roll up your sleeves and make an impact on day-to-day operations. Plus, you'll have tons of opportunities to network with passionate professionals across manufacturing, industrial engineering, and more-sparking new ideas through cross-department collaboration. It's all about expanding your skills, challenging yourself, and exploring where your ambitions can take you!As a member of the Systems Engineering Team, the Applications Engineering Intern will support team training initiatives by renovating internal and external training documents.What You'll Do: Understands the branding guidelines for 4 different Watts entities. Creates presentation templates for branded and generic training materials. Updates outdated presentations and other training materials to current branding guides. Models Watts business goals for quality and customer focus by successfully fulfilling the role of a functional team member Models Watts business philosophy by demonstrating respect for coworkers on a daily basis. Performs other related duties as assigned. Who You Are: Candidates must be a current student pursuing a bachelor's in marketing, communications, business administration or a related field; engineering students are welcome. Time management: the ability to organize and manage multiple priorities. Computer proficiency with MS Office Suite (Word, Excel, PowerPoint). Committed to integrity, respect, and fostering a positive, inclusive work environment. Exhibits a strong sense of accountability, with the ability to take ownership of tasks and follow through on commitments. Must be authorized to work in the United States without current or future sponsorship requirements. Physicals Demands: While performing the duties, the employee will be working in an office environment with exposure to the plant floor as well as the Engineering Test Facility. The employee is required to sit, stand, walk, and use hands to handle objects and other tools Specific vision abilities required by the job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus The Employee may be required to lift, push, and/or pull up to 25 pounds. While performing the job duties, you will be working on-site at a manufacturing facility and will perform the majority of your duties in an office environment. You may, at times, be required to be present on the manufacturing floor and will be required to wear the appropriate personal protective equipment. You will be required to work in the office at the Blauvelt, NY location (Monday - Friday). Your scheduled work hours will be communicated to you by your manager. Pay Range:The expected salary range for this position is $22 -$26 per hour. Actual compensation will be dependent upon individual skills, experience, qualifications, and applicable law.What's In It for YouPeople-First Culture - Enriching and caring for people is at the core of who we are; this includes executing our Diversity, Equity, and Inclusion (DEI) strategy, and providing you with meaningful career growth opportunities, a positive and safe work environment, and affirmation that you are heard, valued, and respected.Flexible PTO Policy - Work-life balance is important at Watts and our interns receive one (1) hour of flexible PTO for every thirty (30) hours worked. Your flexible PTO can be utilized for any type of absence.Paid Holidays - Celebrate the holidays with your loved ones and still get paid! You will receive the following paid holidays off during your time as an Intern with Watts. Where a holiday falls during the weekend, it will be observed on an adjacent weekday. Lunch and Learns - Throughout your internship, there will be opportunities for you to sign up to learn and network with some of the key strategic leaders and thought partners within our core operating model!Sustainability - For five years in a row, Watts has been named one of "America's Most Responsible Companies" by Newsweek. Join our journey as we continue to distinguish Watts as a responsible and committed corporate citizen.Working ConditionsWork in both office and manufacturing environment. May occasionally be required to perform job responsibilities outside the typical office setting.While performing the responsibilities of this job, the employee is frequently required to walk, talk, and/or hear. The employee is occasionally required to stand, sit, and use hands to finger, handle, or feel. You must occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include: close vision, color vision, peripheral vision, depth perception and ability to adjust focus. As required by the Americal Disabilities Act (ADA) Nothing in this job description restricts Watts' right to assign or reassign duties, responsibilities, and working hours/conditions to this position at any time. This position is “at will,” which means that either the employee or Watts may terminate the employment relationship at any time, with or without notice, and for any lawful reason. Watts in it for you: Please note that the following benefits apply only to permanent roles and do not apply to internship roles. Competitive compensation based on your skills, qualifications and experience Comprehensive medical and dental coverage, retirement benefits Family building benefits, including paid maternity/paternity leave 10 paid holidays and Paid Time Off Continued professional development opportunities and educational reimbursement Additional perks such as fitness reimbursements and employee discount programs Learn more about our benefit offerings here: ********************************* How we work: At Watts, our culture is team-oriented and supportive. Employees here genuinely care about the quality of their work, and about each other. Our people are the heart of who we are and contribute to our longevity and continued success. And this is a place where you can have a big career. No matter your role, there are opportunities for learning and development, and your daily contributions make a meaningful impact on the lives of people who use our products and on the future of water. Watts is committed to equal employment opportunity. We follow a policy of administering all employment decisions and personnel actions without regard to race, color, religion, creed, sex, pregnancy, national origin, sexual orientation, age, physical or mental disability, genetic disposition or carrier status, marital status, military or veteran status, minorities, or any other category protected under applicable federal, state, or local law. Consistent with the obligations of state and federal law, Watts will make reasonable accommodations for qualified individuals with disabilities. Any employee who needs a reasonable accommodation should contact Human Resources.

Join our dynamic R&D team within Client Specimen Management, Specimen Acquisition Platform, and become a key contributor to innovative product development. Located in the vibrant community of Franklin Lakes, NJ, this role offers the perfect blend of professional growth and quality of life. Responsibilities Work under general direction, independently determining and developing approaches to solutions. Contribute to projects of considerable significance or lead smaller scope projects. Support material/design/process changes to the product line through the design control process, ensuring well-documented research and analyses. Develop technical solutions to complex problems using sound engineering principles and a variety of methods including experimental, computational, and analytical. Design and develop in vivo and in vitro models to evaluate product features and improvements. Apply innovative and logical risk-based approaches to product development challenges, demonstrating original thinking. Ensure compliance with quality policies, procedures, and practices through effective communication, training, and education. Plan, execute, and analyze design of experiments (DOE). Lead bench studies, tolerance stack-up analysis, design verification, validation, vendor interactions, and specifications development. Perform data analysis using statistical tools, regression analyses, and develop transfer functions. Collect, record, report, interpret, and analyze data, presenting results to peers and business leadership. Provide advanced engineering skills and product evaluation support to build business cases for new opportunities. Required Knowledge and Skills Sound knowledge of engineering first principles. Strong technical judgment and leadership skills. Experience in R&D functional planning, requirement generation, and technical reviews for all product development phases. Strong project management, prioritizing, and multi-tasking skills to work within tight deadlines. Proficiency in solid modeling (Pro/E, SolidWorks or equivalent). Effective communication skills to convey concepts, ideas, and knowledge clearly. Experience in directing associates and leading small cross-functional groups. Proficiency in Microsoft Project. Understanding of disciplined phase-gate product development processes and project planning. Proficiency with fixture design and developing test methods. Understanding of Measurement Systems Analysis (MSA). Knowledge of Six Sigma (DMAIC) practices and Design for Six Sigma (DFSS) methodologies. Considerations for product development in tightly controlled high-volume manufacturing processes. Strong creative, analytical, and problem-solving skills. Good written and verbal communication skills. Additional Information Shift: [] Start: []

Trexquant is a growing systematic fund at the forefront of quantitative finance, with a core team of highly accomplished researchers and engineers. We are in the process of optimizing and reimagining our quant platform to keep pace with our expanding trading operations. To support our rapid growth, we are seeking a talented C++ Trading & Simulator Engineer to join our growing technology team and help build the next generation of trading systems and analytics platforms. As a C++ Trading & Simulator Engineer, you will work closely with quantitative researchers and traders to design, develop, and optimize high-performance systems for algorithmic trading. Your responsibilities will include building and maintaining the core infrastructure for trading simulations, data pipelines, and low-latency execution platforms. The ideal candidate will have a strong background in C++ development, and experience in creating scalable, low-latency, high-throughput systems.

About Altus Power Altus Power is a leading U.S. clean power company, driving the commercial-scale solar economy through a fully integrated platform that invests in, constructs, develops, finances, owns and operates renewable energy infrastructure. With over 1GW of operating assets across 26 states, we're delivering innovative, high-impact energy solutions to Fortune 1000 companies, financial institutions, households, municipalities and more. A portfolio company of TPG Rise Climate and backed by financial partners like Blackstone and Goldman Sachs, we're built for scale, accelerating the shift to reliable, local clean power for communities and businesses nationwide. Headquartered in Stamford, Conn. - just a short train ride from New York City - we offer a fast-paced, collaborative environment where passionate, mission-driven professionals come together to power a cleaner future. We lead with vision. We act with purpose. And we're looking for smart, driven people ready to help power what comes next. Responsibilities: * Ensures SCADA systems are available, secured and functioning at optimal levels * Reviews and responds to reactive maintenance of hardware, communication, and electronic circuits and systems failures * Interprets and modifies work for response to inquiries and issues with multiple projects * Update or create documentation for site equipment, communication flow, and remote access, and continually work to improve our collective site documentation * Ability to work beyond IT applications, such as industry-relevant applications like SQL databases, logic programming, and various meter and SEL products * Be comfortable working mainly with computer technology while being on the phone with local engineers/subcontractors * Identifies problems, research solutions for recommendation, and secures replacement equipment and parts with our Procurement Team Qualifications: * Bachelor's degree Electrical, Mechanical, Computer Science Engineering or related discipline * Minimum of 2 years SCADA experience * Excellent troubleshooting skills and an analytic mindset. * Knowledge of TCP IP, serial, optical fiber, and wireless radio network structure. * Knowledge of industry protocols, DNP3, Modbus, and OPC. * Knowledge of Network, firewall, and VPN structure, and ability to troubleshoot them. * Experience configuring routers, cell modems, and switches * Up to 30% travel and troubleshooting in the field will be required. * Proficient use of Microsoft office tools including but not limited to Word, Excel, Outlook, Sharepoint, Power BI * Experience using task management tools including but not limited to; MS Teams, Smartsheet, or others. Work Life at Altus Our team is the asset we are most proud of. We aim to create a positive work-life balance. Here are a few of the benefits we offer: * Competitive compensation * Health and Dental Insurance (100% of premium paid of Company's standard policy) * Participation in 401k Plan * Paid cell phone service on Company's plan * Company paid lunch in the office * Company paid membership to building gym * Two monthly work from home days Altus is unequivocally committed to the principles of equal employment.