Engineering associate jobs in Orcutt, CA - 54 jobs

Country: United States of America Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: The ability to obtain and maintain a U.S. government issued security clearance is required. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance Security Clearance: DoD Clearance: Secret At Raytheon, the foundation of everything we do is rooted in our values and a higher calling - to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today's mission and stay ahead of tomorrow's threat. Our team solves tough, meaningful problems that create a safer, more secure world. Raytheon is seeking a Mechanical Engineer II to perform conceptual and detailed mechanical designs within the Electronic Warfare Mechanical Design Hardware Department. The section specializes in the design, integration, verification, and production of digital processor and RF receiver subsystems for airborne platforms. The candidate will be expected to follow established procedures and instructions while working closely with program / functional supervision to ensure the overall design objectives are met. Contacts are primarily with the immediate section manager, team lead, project leaders and other personnel (peers) within the applicable program. What You Will Do You will be a technical contributor to the programs and products supported by the department. These activities include the design of structures, mechanisms, thermal systems and electronic enclosures of RF systems for challenging thermal and high vibration environments. You will contribute to the design of RF systems, and be responsible for compiling artifacts and presenting at internal design reviews. You will be releasing and modifying engineering documentation within the product lifecycle management software (PTC Windchill). This includes engineering drawings, analysis and any other artifacts that is critical to the design. Apply basic principles, theories, and concepts within the mechanical engineering field and general knowledge of other related disciplines. Draft communications, create and deliver presentations Work independently and as a team member Qualifications You Must Have Typically requires a degree in Science, Technology, Engineering or Mathematics (STEM) and a minimum of 2 years of prior relevant experience Experience with 3-D modeling using Creo or other CAD tools. Experience with Geometric dimensioning and tolerancing methods, and/or reading mechanical fabrication and assembly drawings Qualifications We Prefer Additional CAD and analysis software experience Prior Experience in Defense or Aerospace Experience with EW/Radar Systems or RF Products. Working knowledge of Environmental testing equipment, procedures and qualification activities Experience with managing budget and schedule Previous experience with design reviews including preparation of chart decks, generating design artifacts and presenting to customers. Experience with electronics packaging, cabling and harness design, or printed wiring board designs and routing. Experience with structural and thermal analysis using FEA modeling techniques. COTS / MOTS Design and Development. Existing DoD Security Clearance What We Offer Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation. Relocation Eligibility Learn More & Apply Now! (Optional) Please consider the following role type definition as you apply for this role Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products. As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. The salary range for this role is 75,800 USD - 144,200 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate's work experience, location, education/training, and key skills.Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance.This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms

Country: United States of America Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: The ability to obtain and maintain a U.S. government issued security clearance is required. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance Security Clearance: DoD Clearance: Secret At Raytheon, the foundation of everything we do is rooted in our values and a higher calling - to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today's mission and stay ahead of tomorrow's threat. Our team solves tough, meaningful problems that create a safer, more secure world. Raytheon is seeking a Mechanical Engineer II to perform conceptual and detailed mechanical designs within the Electronic Warfare Mechanical Design Hardware Department. The section specializes in the design, integration, verification, and production of digital processor and RF receiver subsystems for airborne platforms. The candidate will be expected to follow established procedures and instructions while working closely with program / functional supervision to ensure the overall design objectives are met. Contacts are primarily with the immediate section manager, team lead, project leaders and other personnel (peers) within the applicable program. What You Will Do * You will be a technical contributor to the programs and products supported by the department. These activities include the design of structures, mechanisms, thermal systems and electronic enclosures of RF systems for challenging thermal and high vibration environments. * You will contribute to the design of RF systems, and be responsible for compiling artifacts and presenting at internal design reviews. * You will be releasing and modifying engineering documentation within the product lifecycle management software (PTC Windchill). This includes engineering drawings, analysis and any other artifacts that is critical to the design. * Apply basic principles, theories, and concepts within the mechanical engineering field and general knowledge of other related disciplines. * Draft communications, create and deliver presentations * Work independently and as a team member Qualifications You Must Have * Typically requires a degree in Science, Technology, Engineering or Mathematics (STEM) and a minimum of 2 years of prior relevant experience * Experience with 3-D modeling using Creo or other CAD tools. * Experience with Geometric dimensioning and tolerancing methods, and/or reading mechanical fabrication and assembly drawings Qualifications We Prefer * Additional CAD and analysis software experience * Prior Experience in Defense or Aerospace * Experience with EW/Radar Systems or RF Products. * Working knowledge of Environmental testing equipment, procedures and qualification activities * Experience with managing budget and schedule * Previous experience with design reviews including preparation of chart decks, generating design artifacts and presenting to customers. * Experience with electronics packaging, cabling and harness design, or printed wiring board designs and routing. * Experience with structural and thermal analysis using FEA modeling techniques. * COTS / MOTS Design and Development. * Existing DoD Security Clearance What We Offer * Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation. * Relocation Eligibility Learn More & Apply Now! (Optional) * Please consider the following role type definition as you apply for this role * Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products. As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. The salary range for this role is 75,800 USD - 144,200 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate's work experience, location, education/training, and key skills. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms

TRIC Robotics is revolutionizing crop protection and sustainable farming. By combining ultraviolet (UV) light, robotics, and deep hands-on farm experience, we've developed a patented technology that delivers the most effective chemical-free approach to controlling pests and diseases in fruit production. Starting in California strawberries, we have quickly gained momentum with commitments from farmers, industry leaders, and investors. Now, we are growing our team. We're looking for passionate, driven individuals who want to join an innovative, fast-moving company transforming the way our food is grown. If you're excited to shape the future of sustainable agriculture through real-world impact and cutting-edge technology, we'd love to hear from you. Position Summary As the Mechanical/Agricultural Design Engineer at TRIC Robotics, you will lead a team of engineers and technicians developing, deploying, and maintaining our robotic solutions. You'll oversee all stages of the engineering lifecycle-from concept to field implementation-while driving innovation and ensuring product reliability and scalability for commercial agricultural use. Responsibilities Lead engineering team in developing new robotic systems and improving existing designs. Define engineering project scopes, schedules, budgets, and performance metrics. Mentor junior engineers and technicians to develop technical capacity. Collaborate cross-functionally with field operations, R&D, and executive leadership. Ensure design for manufacturability (DFM), cost efficiency, and sustainability. Conduct technical reviews and ensure compliance with industry safety standards. Oversee the integration of software, mechanical, and electrical systems in field-ready prototypes. Stay informed on industry trends and emerging agricultural technologies. Qualifications Bachelor's or Master's degree in Agricultural, Mechanical, or Mechatronics Engineering. 5+ years of experience in agricultural machinery design and leadership. Proven track record of leading multidisciplinary engineering teams. Strong proficiency in SolidWorks and project management tools. Expertise in agricultural systems, hydraulics, and ICE engines. Experience working with farmers and end users to gather product feedback. Strong communication skills and ability to translate complex ideas into practical solutions. Total Compensation Salary starting at $90,000 Employer Sponsored Medical, Vision, and Dental Coverage 401k with profit sharing Flexible Time Off

What we are looking for SCS Engineers is looking for a summer 2026 intern for our Santa Maria, CA office. This opportunity offers valuable hands-on experience in both technical engineering and business operations through a diverse range of client projects while giving you the chance to explore the beginnings of your own career path. As an intern, you'll work alongside experienced professionals on projects centered around on field sampling for odors, olfactometry, land use permitting, air quality monitoring, and report writing for governing agencies. You will typically work 40 hours per week. How you can make an impact You will contribute to our projects by assisting SCS project teams with the following tasks: Construction observation and documentation On-site sample collection of various compounds Laboratory data management and review Field Sampling for Odors Operations and Maintenance of Ambient Air Analyzers Reporting and calculation preparation CAD drafting Being an Odor Panelist GIS mapping Qualifications Currently pursuing a bachelor's or master's degree in engineering or science and graduating by June 2028 required. Must be willing to live in the Santa Maria area for Summer 2026 (housing allowance will not be provided) Solid technical and computer skills (Excel and Word experience required, GIS preferred but not necessary) Valid driver's license with a driving record in good standing required Ability to travel overnight for work outside of an office setting may be required. Preference for candidates who demonstrate a desire to pursue a career in consulting and professional licensure upon graduation. Learn more about internships at SCS! ************************************** KOHII Pay Range USD $20.00 - USD $24.00 /Hr. Additional Information *At this time, we only consider candidates who are authorized to work in the United States on a full-time basis without the need for current or future employer sponsorship for our internship program. What You'll Gain • Paid internship experience • Mentorship from seasoned engineers and scientists • Networking and development opportunities • Exposure to diverse engineering and science projects • A collaborative, employee-owned company culture Timeline • Internship runs from May/June to August/September 2026 • Start and end dates are flexible to accommodate academic schedules Learn more about our internship program: ************************************** KOHII Whether it's reducing methane emissions at agricultural facilities and landfills, repurposing contaminated properties, producing alternative energy, or sequestering carbon, we've been focused on finding smart climate solutions and improving the natural environment since our inception over 50 years ago. Join our 100% employee-owned firm and start creating your own legacy. As a growing firm, we offer excellent opportunities for career advancement and a competitive package. SCS Engineers is an Equal Opportunity Employer (EOE). SCS provides equal employment opportunities to all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran or disabled status. If you have questions, difficulty using our online system and/or you need an accommodation due to a disability then please contact us about your interest in employment at ***************************.

Requirements Excellent problem-solving skills Ability to formulate concrete analysis problems from imprecise need statements Ability to work with others to conceptualize and solve problems Versatile in C++ and Python Strong math and numerical analysis background Knowledge of detection, tracking, and discrimination algorithms Experience solving multivariate optimizations Candidates must have a B.S., M.S., or Ph.D. in computer science, engineering, math, or a physical science, and 5 years of relevant experience. WE OFFER AN EXCEPTIONAL EMPLOYEE BENEFITS PACKAGE! Competitive Industry Pay 100% Employer-Paid Medical Insurance Premium HSA with Employer Contributions Dental and Vision Coverage Options Paid Holidays Paid Vacation and Sick leave Company Funded 401(k) and Profit Sharing Plans Employee Stock Ownership Plan (ESOP) Life and Disability Insurance Paid Parental Leave Discretionary Bonus Eligibility The annual pay range for the Space Systems Modeling & Simulation Engineer position is $115,000 to $200,000. The posted pay range values provide the candidate with guidance on annual base compensation for the position, at a full time level of effort, exclusive of overtime, bonus, and benefits-related compensation, over a range of qualifications that may fit hiring objectives. Toyon Research Corporation will consider the individual candidate's education, work experience, applicable knowledge, skills and training, among other factors, when preparing an offer of employment. Pay Transparency Nondiscrimination Provision Equal Opportunity Employer including Disability and Veterans Applicant Privacy Notice Learn more about our company in our latest video, We are Toyon. Ref #2573-H

Buellton Role Description: ENGINEERING INTERN Work on projects related but not limited to the following: Modifications to custom automation equipment to improve throughput and quality Validation of equipment of processes Improving productivity by performing time studies, simulation, and line balancing Study and improving plant safety Reviewing and improving process documentation, SOP's Performing Capacity utilization analysis Optimize assembly flow and process Quality control 5S Projects Internship Qualifications: Bachelor program in Chemistry, Engineering, Sciences Enrolled in a degree program during the Spring term preceding internship Completion of at least one year of undergraduate studies and a 3.0 GPA or higher At least 18 years of age and authorized to work in the U.S. Successfully pass a background check and drug screen Possess strong analytic and statistic skills and have the ability to work independently Strong communication, interpersonal, organizational, problem solving & analytical skills The following hourly pay rates reflect the anticipated base pay for this position: If the selected candidate is a student pursuing an Associate-level degree: $16.00 per hour If the selected candidate is a student pursuing an Undergraduate-level degree: $22.00 per hour If the selected candidate is a student pursing a Graduate-level degree: $32.50 per hour If the selected candidate is a student pursuing a Doctorate-level degree: $36.00 per hour The following hourly pay rates reflect the anticipated base pay for this position if a selected candidate were to be located in California, Connecticut, District of Columbia, Illinois (Chicago area), Massachusetts, New Jersey, New York, Washington (Seattle area): Student pursuing an Associate-level degree: $17.00 per hour Student pursuing an Undergraduate-level degree: $24.20 per hour Student pursing a Graduate-level degree: $36.40 per hour Student pursuing a Doctorate-level degree: $40.30 per hour Zoetis is an EEO/Affirmative Action Employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, disability or any other legally protected status.

Redwire is accelerating humanity's expansion into space by delivering reliable, economical and sustainable infrastructure for future generations. Join our team of innovators and get a chance to work alongside a team of talented, curious people that are passionate about designing and deploying solutions that are accelerating humanity's expansion into space. Our team of innovators in Goleta, CA are a leading developer and provider of satellite mechanisms, deployable structures and booms and deployable solar array systems to the global space market. The team is revolutionizing spaceflight and are currently being utilized on missions with NASA, the Department of Defense, and commercial space companies. With many more exciting projects on the horizon our team could use your curiosity, passion, talent and experience to help us Build Above. We have a current opportunity for an Engineering Intern (High School) for Summer 2026. We're looking for high school students, who are interested in pursuing a STEM career and are looking to help participate in developing breakthrough technologies such as deployable solar array systems, deployable structural & mechanical systems and supporting subsystems. We will provide you with an internship that will last approximately 12 weeks, during which you will be performing hands-on meaningful projects aligned with our company goals and objectives. This opportunity will fully immerse you in our technology and culture for an invaluable and rewarding experience. We have a diverse environment and a team of passionate and dedicated people that enjoy sharing their knowledge. Responsibilities: * Work on various project tasks under direction of senior engineering staff and mentors in Deployable Solar Arrays, Structures and Mechanisms. * Apply engineering principles in areas of design, analysis, manufacturing, and test. * Supporting production to build ground support equipment (GSE) and space flight hardware. Ideal Experience: * Minimum of third year in high school interested in pursuing engineering, aerospace or related STEM field. * Hands-on engineering experience school projects, or teams. * Excellent written and verbal communication skills * Vigorous work ethic and high-performance standards * Competent with 3D CAD modeling, SolidWorks preferred * Proficiency in MS Office (Word, Excel, PowerPoint, Outlook) * US citizenship or US Person as defined by ITAR regulations Desired Skills: * Exceptional command of engineering fundamentals * Ability to work on their own initiative and prioritize tasking to fit within the business goals * Ability to ask questions * Ability to thrive in team-based settings * Ability to learn quickly and thrive in a fast-paced environment * Interest in analytical thinking and creative problem solving * Strong organizational skills Grow with us as we innovate the next generation capabilities for a new era of space exploration! We offer a commitment to our core values of Integrity, Innovation, Impact, Inclusion, and Excellence. Pay Range: $20 -$25 per hour Redwire Space is an Equal Opportunity Employer; employment with Redwire Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status. All offers of employment at Redwire Space are contingent upon clear results of a thorough background check and your ability to provide proof of eligibility to work in the US. Note that some positions will also require US Citizenship or ability to obtain a security clearance due to requirements of a classified program. To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR Click Here

Job Description MANUFACTURING ENGINEER INTERNSHIP Are you looking for a great internship opportunity in San Luis Obispo as a Manufacturing Engineer Intern, then we would like to hear from you. This internship is for our Winter/Spring Manufacturing Internship Program. This is not our summer internship program, that will be posted at a later date. Essential Duties and Responsibilities of a Manufacturing Engineer Intern: Assist in all engineering efforts: Requirements, Design, Built, Test, Delivery Help to create solutions to complex technical problems Build and set up equipment Assist in the creation of prototypes Assist in creating build documentation Utilize machining tools to modify and create parts Assist with Work Packets Ideal intern hours 20hrs or more per week Required Qualifications and Skills: Current Junior or Senior or engineering student, or recent graduate Demonstrated clear communication & writing skills Demonstrated application of engineering knowledge and skills Willingness to “roll up your sleeves” and make it happen Consistently abide by all safety requirements Standard Benefits: Casual dress code, Free snacks Amazing location to live, work, and play Company Overview Empirical Systems Aerospace, Inc (ESAero) is a leader in aerospace engineering, product development, and manufacturing, dedicated to delivering high-quality, innovative, and cost-effective solutions to the industry. We specialize in cutting-edge system design, rapid product development, precision manufacturing, comprehensive testing, and technology demonstrations to support the evolving needs of the aerospace community. Committed to excellence, on-time delivery, and continuous growth, we invest in infrastructure to expand our manufacturing and aftermarket capabilities while maintaining the highest standards of engineering services. At ESAero, we don't just build products, we engineer solutions that propel the aerospace industry forward. **This position is fully on-site at ESAero in San Luis Obispo, CA** ESAero is an equal opportunity employer E-Verify participation required for employment. Must present proof of authorization to work in the United States Must be able to pass background check Hiring Range: $20-$23/hour Powered by JazzHR 2FGGrDjWL1

Trust Automation Trust Automation has over 30 years of experience in custom motors, linear drives, digital drives, and systems which meet the unique needs of its customers. Its product line includes motors, linear drives, digital drives, custom assemblies, and products to fit unique applications and ground-up system design and manufacturing solutions. We design, build and support control and power management systems for the most demanding defense, semiconductor, industrial automation, and medical applications. Trust Automation is an equal opportunity employer and committed to attracting, hiring, developing, and retaining a skilled, productive, and diverse workforce, personnel with competencies and experience related to the regional and State population. Every employee has an “at-will” relationship with Trust Automation. This means that employment with Trust Automation is at the mutual consent of the employer and the employee and is subject to termination by either party at will, with or without cause or advance notice. Job Summary The primary purposes of the Manufacturing Engineer position are to design and implement product realization processes from prototype thru volume manufacturing phases, then continuously analyze and improve those processes to increase product quality, enhance the safety of product and operator(s), and reduce the labor and costs to support projected sales volumes while supporting On Time Delivery (OTD) objectives. Duties and Responsibilities To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodation may be made to enable individuals with disabilities, who are otherwise qualified, to perform the essential functions. Support the Manufacturing Engineering Manager and Manufacturing Program Manager (MPM) regarding program, product, process, and schedule directives. Design, fabricate, and/or facilitate the development of product-specific assembly and test tooling and equipment with ENG and MFGE Technicians. Develop workcell layout and tooling/equipment requirements, using Lean Six Sigma and 5S+1 principles. Establish Value Stream Maps of the build and test processes during early product phases, then iterate those maps during changes in volume and product configurations. Work directly with Engineering teams for DFM/DFA input in product design cycles. Support procurement activities, inventory management, and capacity planning through ERP BOM reviews and changes with configuration management specialists. Serve as or support Trust's primary contacts for suppliers on manufacturing/quality inquiries and issues. Assist the MPM in creating production plans through LRIP to allow handoff to Manufacturing with outputs that include Production Lists/BOMs, Work Instructions, assembly and test fixturing, and resource capacity. Train/mentor MFG and MFGE team members on assembly and test techniques and methodologies. Hands-on assembly and/or testing during Prototype and LRIP phases. Perform duties of the MFGE Technician when needed. Once product lines are transitioned to Released Manufacturing phase, focus on continuous improvements and develop proposals using lean optimization tools and principles. Team with Configuration Management as technical reference for change proposals through the ISS/DCO/ECO process. Identify and chase opportunities to transfer in-house labor to lower cost contract manufacturers “CMs”. Facilitate to completion the data and documentation to propose labor transfer, work with MPM on schedule cut-ins based on cost and lead time impacts and involve configuration management specialists to drive the cut-in through ERP. Work alongside Quality personnel to identify and mitigate trending impediments to our OTD objectives through quantitative analysis of failure data, then propose robust solutions. With Materials and Quality teams, engage current and potential suppliers (metal fabrication, special processing, PCB assembly/test, cable fabrication, etc.) to identify opportunities in cost and lead time savings while ensuring or improving design intent and part reliability. Collaborate with design and test engineering personnel to feedback manufacturing challenges and create cost-saving opportunities through design improvements and assembly/test automation. Recommend disposition for failed components/assemblies via NCR and MRB processes while assessing costs, lead time, and inventory impacts. Lead or participate in inter- and intra-departmental teams for focused and actionable solutions during line-down events (“rapid response”, “tiger” teams). AS9100 assurance Under AS9100 guidelines, understand and implement the following TA Processes to satisfy objectives in Customer Service, product design and improvement, sub-tier collaboration and quality assurance, and manufacturing throughput: CA (Corrective Action) CI (Continuous Improvement) ECO (Engineering Change Order) DCO (Document Change Order) Position Requirements Bachelor's Degree and 2 to 5 years experience, or 5 to 9 years related experience. Comprehension of mechanical or electrical drawings/schematics Proficiency with Microsoft Office applications Proficiency with Solidworks and PDM Vault file management Proficiency with OrCAD/Altium Proficiency using MRP/ERP Professional written and verbal interpersonal communication skills Experience in applying Lean Six Sigma principles. Excellent arithmetic and logic ability. High attention to detail Ability to perform the above duties with minimal supervision Demonstrated experience in high-paced, multi-faceted working environments with frequent changes in priority and responsibility. Ability to maintain the day-to-day information required to develop or manufacture products and keep the satisfaction of our customers at its highest level. May participate in the identity verification process to access secure client or government portals by authorizing certified supplier or customer management platforms to obtain information from your personal credit profile or other information, solely to verify your identity. Physical Requirements Hearing and speaking to exchange information in person, on the telephone or virtually. Dexterity of hands, fingers, and wrist to operate a computer keyboard, calculator, or assemble/manufacture intricate items. Seeing to read a variety of materials. Sitting or standing for extended period of time. Physical agility to lift up to 50 pounds to shoulder height. Any items that weigh more than 50 pounds will require two or more people or a lifting device to move. Physical agility to lift, carry, push, or pull objects. Pay/Salary Information Pay scale for this position - $85,529.60- $110,000.00 annually By submitting your application, you acknowledge that you have read and understand the information provided within. You certify that the information contained in this application is correct to the best of your knowledge. You understand that to falsify information is grounds for refusing to hire, or for discharge should you be hired.

FLSA STATUS: Non-Exempt SALARY RANGE: The anticipated salary range for this role is $25 to $35 per hour. This range reflects a good faith estimate based on the targeted level for the role and typical compensation benchmarks across U.S. locations. Actual compensation may vary depending on the selected candidate's qualifications, experience, geographical location, and internal alignment. SUMMARY The Engineering Specialist, Electrical is a hands-on technical role responsible for executing electrical assembly, wiring, and test activities for unmanned aircraft systems (UAS). This role builds on foundational electrical skills and expands into more complex harness builds, subsystem integration, electrical troubleshooting, and execution of electrical test procedures with minimal supervision. The Electrical Specialist II supports prototype development, test articles, and low-rate production hardware, identifies and resolves routine electrical issues, and partners with engineers to improve build quality, reliability, and electrical integration processes. This role represents a fully contributing technical specialist progressing toward senior-level electrical authority. RESPONSIBILITIES The following job functions are a basic requirement but are not limited to and may be assigned other duties. Build and install electrical assemblies, wire harnesses, and cable assemblies for UAS platforms. Perform electrical integration activities, including routing, securing, and terminating wiring within airframes and subsystems. Execute electrical test procedures independently, including continuity checks, insulation resistance tests, and power-on verification. Troubleshoot and resolve routine electrical issues such as wiring errors, connector faults, grounding problems, or intermittent signals. Support board-level bring-up activities under engineering guidance. Read, interpret, and apply electrical schematics, wiring diagrams, and engineering documentation. Perform rework, modifications, and repairs on electrical assemblies in accordance with procedures. Document build steps, test results, discrepancies, and corrective actions. Maintain ESD compliance, tool control, and organized electrical workspaces. Collaborate with electrical engineers, mechanical specialists, and production teams to improve electrical integration and build processes. Assumes all other responsibilities as assigned. REQUIRED QUALIFICATIONS The following are a non-exhaustive list of qualifications for the position: High school diploma or GED required. Technical coursework or certification in electrical technology, electronics, avionics, or a related field preferred. Hands-on experience in electrical assembly, avionics, electronics manufacturing, or aerospace/robotics environments. Demonstrated experience building wire harnesses and performing electrical integration with limited supervision. Solid understanding of electrical principles, wiring standards, and grounding practices. Proficiency reading and applying electrical schematics and wiring diagrams. Experience using test equipment such as multimeters, power supplies, and basic signal measurement tools. Familiarity with common connectors, pinning standards, and harness fabrication techniques. Strong troubleshooting skills for routine electrical issues. High attention to detail and commitment to build quality. Ability to manage tasks independently and prioritize work effectively. Clear communication skills and ability to work cross-functionally. Dependable and adaptable in fast-paced development environments. PREFERRED QUALIFICATIONS Certificate or AA degree in Electrical Technology, Electronics Technology, Avionics, or a related field. Experience supporting UAS, avionics, embedded electronics, or aerospace prototype development. Prior exposure to test environments, flight hardware, or environmental testing activities. Soldering proficiency for through-hole and basic surface-mount components. Familiarity with wire harness documentation, pin-out tables, or cable drawings. Proactive mindset with interest in improving electrical build processes. Interest in developing toward Senior (III) electrical specialist responsibilities. REDWIRE DEFENSE TECH BENEFITS Matching 401(k) Paid PTO Paid holidays Medical, vision, and dental insurance Group Short-Term & Long-Term Disability HSA and FSA Options Critical Care Plan Accident Care Plan CLEARANCE REQUIREMENTS This position may require access to information that is subject to compliance with the International Traffic Arms Regulations (“ITAR”) and/or the Export Administration Regulations (“EAR”). To comply with the requirements of the ITAR and/or the EAR, applicants will be asked to provide specific documentation to verify a US person's status under the ITAR and the EAR. WORK ENVIRONMENT AND PHYSICAL REQUIREMENTS The work environment may involve a standard office setting while also incorporating elements of a production area. Employees will use standard office equipment, including computers, and must demonstrate stamina to sit or stand while maintaining attention to detail despite potential interruptions. The role may require occasional activities such as walking, climbing, stooping, crouching, and bending. Vision is necessary for reading printed materials and a computer screen, while hearing and speech are essential for effective communication both in person and over the telephone. Additionally, the position may necessitate travel by air or automobile. Employees may be required to use personal protective equipment, including safety glasses, safety shoes, and shop coats, to ensure safety in the production environment. Employees may be able to lift up to 30 pounds as needed. REDWIRE DEFENSE TECH IS AN EQUAL OPPORTUNITY EMPLOYER All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, disability, age, sexual orientation, gender identity, national origin, veteran status, or genetic information. Redwire Defense Tech is committed to providing access, equal opportunity and reasonable accommodation for individuals with disabilities in employment, its services, programs, and activities. To request reasonable accommodation, contact Human Resources. Continued employment remains on an “At-Will” basis.

Impact Recruitment has partnered with a 100% employee-owned multidiscipline design firm with a full spectrum of services including architecture, landscape architecture, planning, civil and structural engineering, and surveying. Our client is looking for a Civil Project Engineer at the San Luis Obispo, CA office location. The Project Engineer will provide project design in AutoCAD Civil 3D, including plans, calculations, specifications, and estimates for entire projects and portions of larger projects, with moderate direction from senior staff. Responsibilities of this role: Support management for public and private land development projects, including schedule, budget, communication with the client, and overall project design, under the supervision of Project Manager Monitor performance of junior staff in staying within scope and budget Oversee overall project budget for managed projects Direct and oversee CAD and design work of junior staff Assist in the preparation of task budgets within a proposal, under the direction of a Project Manager Prepare the report and direct the activities of junior staff in gathering data. Who we are looking for: A Bachelor's Degree in Civil Engineering A minimum of five (5) years of work experience Current knowledge of professional codes, laws, computer applications, and trends PE license Work experience in Civil 3D. This is an immediate opening with outstanding benefits and salary package available commensurate with experience. Reach out to Impact Recruitment at info@impactrecruitment.com/************** to learn more about this position. Impact Recruitment is an equal opportunity employer. Impact Recruitment does not discriminate in recruitment, hiring, or terms or conditions of employment on the basis of race, sex, color, national origin, sexual orientation, religion, age, disability, medical condition as defined under state law, or any other basis prohibited by applicable federal, state, or local law. Impact Recruitment also provides reasonable accommodations to disabled individuals to assist in the hiring process and to qualified individuals with disabilities in the performance of essential job functions, as required by federal, state, or local law.

Luttrell Staffing Group is currently hiring Project Engineer positions in San Luis Obispo, CA. 119k-120k / Year Monday - Friday | 9am-5pm Full-Time | Direct-Hire Zero Fees - you'll never be charged for any screening service Offer Remote Flexibility Additional Pay & Bonus Opportunities 401K & Retirement Planning PTO & Holiday Pay Team Building Activities Full Insurance Package (including Health, Dental, and Medical) Job Duties for Project Engineer: Perform civil design, create construction drawings, conduct engineering calculations, and prepare reports, specifications, and cost estimates Manage projects involving site development for commercial sites, residential land development, mixed-use projects, and municipal infrastructure such as sewer, water, storm drain, grading, and transportation Ensure effective communication with clients, sub-consultants, and local regulatory agencies Oversee project scope, budgets, and timelines to meet client needs Follow all policies and safety procedures in place Completes any other related tasks as needed Qualifications for Project Engineer: 5 years of design experience, with 1 year managing project scopes, budgets, and timelines Familiarity with land development, street improvements, grading, drainage, and utilities Proficient in AutoCAD and design software Experienced with technical specifications, cost estimates, and knowledge of professional codes, laws, and industry standards If you have the experience and skills we're looking for, apply to Luttrell Staffing today! Call or text (805) 544-1800. Luttrell Staffing Group is an equal-opportunity employer. #HMGNDS

Bring your passion for space! Where dreams and reality collide and the output is, out of this world. At Redwire Space, we are a team of dreamers and doers. Where the impossible becomes possible, and every day is an opportunity to learn and get one step closer to knowing the unknown. Join us on our mission to expand humanity's presence in space. The talented innovators in Goleta, CA are a leading developer and provider of satellite mechanisms, deployable structures and booms and deployable solar array systems to the global space market. The team is revolutionizing spaceflight and are currently being utilized on missions with NASA, the Department of Defense, and commercial space companies. With many more exciting projects on the horizon our team could use your curiosity, passion, talent and experience to help us Build Above. We have a current opportunity for a Staff Project Engineer to join our team in Goleta, CA. This role is responsible for project technical execution using a holistic approach to design, develop, evaluate, and modify products through their entire life cycle. Serves as Lead to the business unit in long-range planning concerning new or projected areas of technological research and advancements. Responsibilities Lead project to ensure the scope, schedule, staffing and budget are well defined and maintained. Functions as technical lead of a program or project team. Technical customer liaison and support for business development activities. Responsible for the technical integrity of projects while providing technical guidance to clients, and departments at the brand, program, and project levels. Act as a point of technical escalation and resolution during a project's lifecycle. Non-conformance disposition authority. Leads in design reviews, test plans and procedures to ensure applicability to the current system and traceability of requirements through compliance verification and validation. Generates system level requirements verification procedures and customer acceptance test procedures. Reduces high level product development strategies into system requirement specifications and works with other engineering disciplines to develop lower-level detailed requirements. Establishes and coordinates development of standards, practices, and procedures as related to the overall product development. Assesses performance using evaluation criteria and technical performance measures. Responsible for a projects technical/operational leadership within the programmatic guidelines set by the program manager and the customer. Controls project costs through close control of system intent, aligning resources to project phases, and approving expenditures. Defines, generates, reviews, presents project's required documentation. Some travel required - an average of 10-15% travel may be required. Most of the travel is local but some overnight travel may be necessary. Ideal Experience B.S. in Aerospace Engineering or Mechanical Engineering Minimum of 8+ years' experience, including developing, designing, manufacturing, and testing production hardware. Must have well-rounded System Level approach, with previous experience leading technical teams. Experience with space mechanism design and aerospace guidelines. Proficient in CAD and PDM Systems. Drafting knowledge with understanding of GD&T per ASME Y14.5 along with tolerance analysis capabilities. Prior experience preparing and presenting project / program updates to all levels and customers. Experience in the Root Cause Analysis process. Desired Skills M.S. in Aerospace Engineering, Mechanical Engineering, or other space-related discipline. Experience with PDM Pro, SolidWorks, SolidWorks Simulation, Thermal Desktop, NASTRAN or ANSYS is a plus. Ideal experience with the following Aerospace guidelines: GSFC-STD-7000A (GEVS), AIAA S-114-2005, NASA-STD-5017, MMPDS, etc. Experience with Graphite and Fiberglass composites, Photovoltaics, flexible circuits and printed circuit board assemblies. Experience working with design, manufacturing and verification of PV systems and composite structures. Proficient with Microsoft Office 365, including SharePoint and Teams. Microsoft Project experience a plus. Training and Certification in the Lean Six Sigma process. Strong attention to detail with advanced verbal and written communication skills. Self-motivated in applying engineering principles, concepts, and practices of mechanical / aerospace engineering to independently perform assignments. Grow with us as we innovate the next generation capabilities for a new era of space exploration! We offer a highly competitive benefits package along with a commitment to our core values of Integrity, Innovation, Impact, Inclusion, and Excellence. Pay Range $145,000 - $180,000/yr. How We Determine What We Pay (Compensation Philosophy) Redwire determines pay for positions using local, national, and industry-specific survey data, for our locations throughout the US. We will evaluate external equity and the cost of labor/prevailing wage index, in the relative marketplace for jobs directly comparable to jobs within our company. For new hires, we strive to make competitive offers allowing the new employee room for future growth. Salaries will be based on the applicant's level of experience, education, and specialized knowledge and skills. Additionally, we consider the external market rate, the amount we have budgeted internally, and internal equity within the company for the same position. An employee/candidate with a stronger skill set will be considered for higher pay. Redwire is an Equal Opportunity Employer; employment with Redwire is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status. All offers of employment at Redwire are contingent upon clear results of a thorough background check and your ability to provide proof of eligibility to work in the US. Note that some positions will also require US citizenship or ability to obtain a security clearance due to requirements of a classified program. To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR Click Here

Country: United States of America Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: The ability to obtain and maintain a U.S. government issued security clearance is required. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance Security Clearance: DoD Clearance: Secret At Raytheon, the foundation of everything we do is rooted in our values and a higher calling - to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today's mission and stay ahead of tomorrow's threat. Our team solves tough, meaningful problems that create a safer, more secure world. Raytheon is seeking a Principal Mechanical Engineer to lead new product development within the Electronic Warfare Mechanical Design Hardware Department. The section specializes in the design, integration, verification, and production of digital processor and RF receiver subsystems for airborne platforms. The candidate oversees the mechanical development supporting a variety of programs in Goleta, California. Key interfaces will be with other sections across the Department, other Engineering disciplines, as well as internal customers leading the supporting programs. What You Will Do * The Principal Engineer is a key technical contributor to the programs and products supported by the department. These activities may include designing RF systems for challenging thermal and high vibration environments. This candidate will lead programs as a Responsible Engineering Authority (REA) or Integrated Product Team Lead (IPTL), and serves as a liaison to programs, ensuring program success along technical, cost and schedule parameters, as well as overseeing junior engineer's job assignments and performance. * This role also requires the candidate to possess working knowledge of electronics packaging design and manufacturing. This knowledge set includes, but is not limited to, thermal and structural design and analysis, electrical component design, construction and failure modes, printed wiring board and circuit card assembly processes and best practices, surface mount and through hole component installation processes and failure modes, metal fabrication and finishing methods, RF isolation mechanical design, and environmental test methods and equipment. Candidate will also have working knowledge of electronics/processor systems design and development utilizing COTS/MOTS components and products. * You must have an outstanding ability to provide technical guidance and act as a mentor to his/her matrix team. The candidate must be adept at making technical presentations and at establishing customer relationships. The candidate shall be a highly motivated "self-starter" able to lead by example, possessing strong interpersonal, written and verbal communication skills, and maintain positive relationships and satisfaction with functional and program leadership. Qualifications You Must Have: * Typically requires a degree in Science, Technology, Engineering or Mathematics (STEM) and a minimum of 8 years of prior relevant experience unless prohibited by local laws/regulations. * Minimum 8 years' experience with Mechanical Design, Development and/or Implementation of Defense related Electronic Systems OR 5 years with an advance degree. * Experience with Geometric Dimensioning and Tolerancing (GD&T) and ASME drawing and documentation standards and procedures. * Experience with solid modeling with a minimum of three years of creating and documenting mechanical designs in Pro/Engineer/CREO or similar modeling tools. Qualifications We Prefer * Experience with EW/Radar Systems or RF Products * Experience with Conformal Antenna Array Packaging * Experience with managing budget and schedule (Earned Value Management (EVM) * Previous experience with design reviews including preparation of chart decks, generating design artifacts and presenting to customers * Experience with electronics packaging, cabling and harness design, or printed wiring board designs and routing * Experience with structural and thermal analysis using FEA modeling techniques * Experience developing Basis of Estimate (BOEs) for proposals and providing proposal technical volume leadership * Proficiency with Parts Management and Materials and Process Engineering COTS / MOTS Design and Development * Experience executing root cause analysis and developing effective corrective actions. * Experience interfacing and communicating with customers (internal/external), regarding assessments of program performance (technical, cost and schedule) What We Offer * Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation. * Relocation Eligibility Learn More & Apply Now! (Optional) * Please consider the following role type definition as you apply for this role * Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products. As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. The salary range for this role is 118,300 USD - 224,900 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate's work experience, location, education/training, and key skills. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms

Requirements Bachelor's or advanced degree in Electrical Engineering, Mechanical Engineering, Physics, or arelated technical field 5+ years of experience in engineering, integration, and testing Strong understanding of engineering development processes (requirements development, reviewlife cycle, verification & validation) Familiarity with testing standards (INCOSE SE Handbook, MIL-STD, and ISO standards) Excellent analytical, problem-solving, and communication skills Previous experience with DOD programs and unmanned aircraft systems is highly desirable Must be customer-focused, detail-oriented, and capable of working with multiple teams to resolvetechnical problems Ability to work independently and collaboratively in a team environment Ability to obtain and maintain a DoD security clearance is required WE OFFER AN EXCEPTIONAL EMPLOYEE BENEFITS PACKAGE! Competitive Industry Pay 100% Employer-Paid Medical Insurance Premium HSA with Employer Contributions Dental and Vision Coverage Options Paid Holidays Paid Vacation and Sick leave Company Funded 401(k) and Profit Sharing Plans Employee Stock Ownership Plan (ESOP) Life and Disability Insurance Paid Parental Leave Discretionary Bonus Eligibility The annual pay range for the Aerospace Project Engineer position is $125,000 to $190,000. The posted pay range values provide the candidate with guidance on annual base compensation for the position, at a full time level of effort, exclusive of overtime, bonus, and benefits-related compensation, over a range of qualifications that may fit hiring objectives. Toyon Research Corporation will consider the individual candidate's education, work experience, applicable knowledge, skills and training, among other factors, when preparing an offer of employment. Pay Transparency Nondiscrimination Provision Equal Opportunity Employer including Disability and Veterans Applicant Privacy Notice Learn more about our company in our latest video, We are Toyon. Ref #2602-H

Role Description: ENGINEERING INTERN Work on projects related but not limited to the following: Modifications to custom automation equipment to improve throughput and quality Validation of equipment of processes Improving productivity by performing time studies, simulation, and line balancing Study and improving plant safety Reviewing and improving process documentation, SOP's Performing Capacity utilization analysis Optimize assembly flow and process Quality control 5S Projects Internship Qualifications: Bachelor program in Chemistry, Engineering, Sciences Enrolled in a degree program during the Spring term preceding internship Completion of at least one year of undergraduate studies and a 3.0 GPA or higher At least 18 years of age and authorized to work in the U.S. Successfully pass a background check and drug screen Possess strong analytic and statistic skills and have the ability to work independently Strong communication, interpersonal, organizational, problem solving & analytical skills The following hourly pay rates reflect the anticipated base pay for this position: If the selected candidate is a student pursuing an Associate-level degree: $16.00 per hour If the selected candidate is a student pursuing an Undergraduate-level degree: $22.00 per hour If the selected candidate is a student pursing a Graduate-level degree: $32.50 per hour If the selected candidate is a student pursuing a Doctorate-level degree: $36.00 per hour The following hourly pay rates reflect the anticipated base pay for this position if a selected candidate were to be located in California, Connecticut, District of Columbia, Illinois (Chicago area), Massachusetts, New Jersey, New York, Washington (Seattle area): Student pursuing an Associate-level degree: $17.00 per hour Student pursuing an Undergraduate-level degree: $24.20 per hour Student pursing a Graduate-level degree: $36.40 per hour Student pursuing a Doctorate-level degree: $40.30 per hour Full time Intern (Trainee) Colleague Any unsolicited resumes sent to Zoetis from a third party, such as an Agency recruiter, including unsolicited resumes sent to a Zoetis mailing address, fax machine or email address, directly to Zoetis employees, or to Zoetis resume database will be considered Zoetis property. Zoetis will NOT pay a fee for any placement resulting from the receipt of an unsolicited resume. Zoetis will consider any candidate for whom an Agency has submitted an unsolicited resume to have been referred by the Agency free of any charges or fees. This includes any Agency that is an approved/engaged vendor but does not have the appropriate approvals to be engaged on a search. Zoetis is committed to equal opportunity in the terms and conditions of employment for all employees and job applicants without regard to race, color, religion, sex, sexual orientation, age, gender identity or gender expression, national origin, disability or veteran status or any other protected classification. Disabled individuals are given an equal opportunity to use our online application system. We offer reasonable accommodations as an alternative if requested by an individual with a disability. Please contact Zoetis Colleague Services at ********************************** to request an accommodation. Zoetis also complies with all applicable national, state and local laws governing nondiscrimination in employment as well as employment eligibility verification requirements of the Immigration and Nationality Act. All applicants must possess or obtain authorization to work in the US for Zoetis. Zoetis retains sole and exclusive discretion to pursue sponsorship for the acquisition or maintenance of nonimmigrant status and employment eligibility, considering factors such as availability of qualified US workers. Individuals requiring sponsorship must disclose this fact. Please note that Zoetis seeks information related to job applications from candidates for jobs in the U.S. solely via the following: (1) our company website at ********************** site, or (2) via email to/from addresses using only the Zoetis domain of “@zoetis.com”. In addition, Zoetis does not use Google Hangout for any recruitment related activities. Any solicitation or request for information related to job applications with Zoetis via any other means and/or utilizing email addresses with any other domain should be disregarded. In addition, Zoetis will never ask candidates to make any type of personal financial investment related to gaining employment with Zoetis.

Are you looking for a great internship opportunity in San Luis Obispo as a Manufacturing Engineer Intern, then we would like to hear from you. This internship is for our Winter/Spring Manufacturing Internship Program. This is not our summer internship program, that will be posted at a later date. Essential Duties and Responsibilities of a Manufacturing Engineer Intern: Assist in all engineering efforts: Requirements, Design, Built, Test, Delivery Help to create solutions to complex technical problems Build and set up equipment Assist in the creation of prototypes Assist in creating build documentation Utilize machining tools to modify and create parts Assist with Work Packets Ideal intern hours 20hrs or more per week Required Qualifications and Skills: Current Junior or Senior or engineering student, or recent graduate Demonstrated clear communication & writing skills Demonstrated application of engineering knowledge and skills Willingness to “roll up your sleeves” and make it happen Consistently abide by all safety requirements Standard Benefits: Casual dress code, Free snacks Amazing location to live, work, and play Company Overview Empirical Systems Aerospace, Inc (ESAero) is a leader in aerospace engineering, product development, and manufacturing, dedicated to delivering high-quality, innovative, and cost-effective solutions to the industry. We specialize in cutting-edge system design, rapid product development, precision manufacturing, comprehensive testing, and technology demonstrations to support the evolving needs of the aerospace community. Committed to excellence, on-time delivery, and continuous growth, we invest in infrastructure to expand our manufacturing and aftermarket capabilities while maintaining the highest standards of engineering services. At ESAero, we don't just build products, we engineer solutions that propel the aerospace industry forward. **This position is fully on-site at ESAero in San Luis Obispo, CA** ESAero is an equal opportunity employer E-Verify participation required for employment. Must present proof of authorization to work in the United States Must be able to pass background check Hiring Range: $20-$23/hour

Bring your passion for space! Where dreams and reality collide and the output is, out of this world. At Redwire Space, we are a team of dreamers and doers. Where the impossible becomes possible, and every day is an opportunity to learn and get one step closer to knowing the unknown. Join us on our mission to expand humanity's presence in space. The talented innovators in Goleta, CA are a leading developer and provider of satellite mechanisms, deployable structures and booms and deployable solar array systems to the global space market. The team is revolutionizing spaceflight and are currently being utilized on missions with NASA, the Department of Defense, and commercial space companies. With many more exciting projects on the horizon our team could use your curiosity, passion, talent and experience to help us Build Above. We have a current opportunity for a Staff Project Engineer to join our team in Goleta, CA. This role is responsible for project technical execution using a holistic approach to design, develop, evaluate, and modify products through their entire life cycle. Serves as Lead to the business unit in long-range planning concerning new or projected areas of technological research and advancements. Responsibilities * Lead project to ensure the scope, schedule, staffing and budget are well defined and maintained. * Functions as technical lead of a program or project team. * Technical customer liaison and support for business development activities. * Responsible for the technical integrity of projects while providing technical guidance to clients, and departments at the brand, program, and project levels. * Act as a point of technical escalation and resolution during a project's lifecycle. * Non-conformance disposition authority. * Leads in design reviews, test plans and procedures to ensure applicability to the current system and traceability of requirements through compliance verification and validation. * Generates system level requirements verification procedures and customer acceptance test procedures. * Reduces high level product development strategies into system requirement specifications and works with other engineering disciplines to develop lower-level detailed requirements. * Establishes and coordinates development of standards, practices, and procedures as related to the overall product development. * Assesses performance using evaluation criteria and technical performance measures. * Responsible for a projects technical/operational leadership within the programmatic guidelines set by the program manager and the customer. * Controls project costs through close control of system intent, aligning resources to project phases, and approving expenditures. * Defines, generates, reviews, presents project's required documentation. * Some travel required - an average of 10-15% travel may be required. Most of the travel is local but some overnight travel may be necessary. Ideal Experience * B.S. in Aerospace Engineering or Mechanical Engineering * Minimum of 8+ years' experience, including developing, designing, manufacturing, and testing production hardware. * Must have well-rounded System Level approach, with previous experience leading technical teams. * Experience with space mechanism design and aerospace guidelines. * Proficient in CAD and PDM Systems. * Drafting knowledge with understanding of GD&T per ASME Y14.5 along with tolerance analysis capabilities. * Prior experience preparing and presenting project / program updates to all levels and customers. * Experience in the Root Cause Analysis process. Desired Skills * M.S. in Aerospace Engineering, Mechanical Engineering, or other space-related discipline. * Experience with PDM Pro, SolidWorks, SolidWorks Simulation, Thermal Desktop, NASTRAN or ANSYS is a plus. * Ideal experience with the following Aerospace guidelines: GSFC-STD-7000A (GEVS), AIAA S-114-2005, NASA-STD-5017, MMPDS, etc. * Experience with Graphite and Fiberglass composites, Photovoltaics, flexible circuits and printed circuit board assemblies. * Experience working with design, manufacturing and verification of PV systems and composite structures. * Proficient with Microsoft Office 365, including SharePoint and Teams. Microsoft Project experience a plus. * Training and Certification in the Lean Six Sigma process. * Strong attention to detail with advanced verbal and written communication skills. * Self-motivated in applying engineering principles, concepts, and practices of mechanical / aerospace engineering to independently perform assignments. Grow with us as we innovate the next generation capabilities for a new era of space exploration! We offer a highly competitive benefits package along with a commitment to our core values of Integrity, Innovation, Impact, Inclusion, and Excellence. Pay Range $145,000 - $180,000/yr. How We Determine What We Pay (Compensation Philosophy) Redwire determines pay for positions using local, national, and industry-specific survey data, for our locations throughout the US. We will evaluate external equity and the cost of labor/prevailing wage index, in the relative marketplace for jobs directly comparable to jobs within our company. For new hires, we strive to make competitive offers allowing the new employee room for future growth. Salaries will be based on the applicant's level of experience, education, and specialized knowledge and skills. Additionally, we consider the external market rate, the amount we have budgeted internally, and internal equity within the company for the same position. An employee/candidate with a stronger skill set will be considered for higher pay. Redwire is an Equal Opportunity Employer; employment with Redwire is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status. All offers of employment at Redwire are contingent upon clear results of a thorough background check and your ability to provide proof of eligibility to work in the US. Note that some positions will also require US citizenship or ability to obtain a security clearance due to requirements of a classified program. To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR Click Here

Country: United States of America Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract. Security Clearance: None/Not Required At Raytheon, the foundation of everything we do is rooted in our values and a higher calling - to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today's mission and stay ahead of tomorrow's threat. Our team solves tough, meaningful problems that create a safer, more secure world. Raytheon Vision Systems (RVS) is a world leader in the research, design, and manufacturing of focal plane arrays and flight-based vision systems supporting a myriad of defense, surveillance, space, and weather tracking applications. We have an immediate career-growth opportunity for a Manufacturing Engineer to join our team in Goleta, California What You Will Do Reading technical drawings as well as using Microsoft Office Suite (Word, Excel, Power Point, and Outlook) for daily communications, tracking, and documenting manufacturing processes for assembly. Write manufacturing plans and instructions in accordance with engineering specifications, quality requirements, safety needs, and security requirements. Generate Bills of Material (BOMs). Participate in tooling reviews and provide evaluation and feedback of tool designs. Review hardware for compliance; generate work/rework/repair documentation; perform troubleshooting to support production activities. Determine the causes of defects and improve processes through updates to work instructions, tooling, process, programs, or equipment; present results of investigations to peers and management at Corrective Action Board (CAB). Troubleshoot to support production activities and project delivery. Qualifications You Must Have Typically requires a degree in Science, Technology, Engineering, Mathematics, or a STEM degree and less than 2 years of prior relevant experience. Experience in Engineering. Qualifications We Prefer Working knowledge of military and commercial manufacturing processes. Working knowledge of ERP and MES systems, SAP/ CMES experienced preferred. Knowledge of Six Sigma, Lean Manufacturing, or other continuous improvement methodologies. Experience or knowledge of Statistical Process Control, Gage R&Rs, Capability Studies, Design of Experiments (DOE) or other quantitative continuous improvement tools. Experience in a production environment closely teaming with all levels of manufacturing stakeholders. Budgeting and presentation skills. What We Offer Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Trust, Respect, Accountability, Collaboration, and Innovation. Learn More & Apply Now! Please consider the following role type definition as you apply for this role. Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products. This position is an onsite role - Goleta, CA: Visit RVS: ******************************************* Explore Raytheon in Goleta: ************************************************************* #LI-ONSITE As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. The salary range for this role is 62,900 USD - 119,700 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate's work experience, location, education/training, and key skills.Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance.This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms