Engineering technician jobs in Fort Carson, CO - 79 jobs

Type: Non-Exempt Work Schedule: Full Time, Day Shift. On-call work may also be required based on operational needs. Compensation: $38.74 - $38.74 /hourly Deadline: December 31, 2025 Benefits: Tessera is proud to offer a comprehensive compensation and benefits package to our eligible part-time and full-time employees. Full-Time benefits of an Engineering Technician II at Tessera include: Medical, Dental, Vision, 401(k) retirement plan, Life & Short-Term Disability Insurance $8.78/hr Health and Welfare Benefit Flexible Spending Accounts for both medical and dependent care 11 paid federal holidays, accrual of 22 paid days of vacation at the start of employment. Potential shared earning bonus Tuition assistance is available after 1 year of employment and potential scholarships for qualified dependents Professional development, certifications, and training opportunities Verizon wireless discount Employee Assistance Program (EAP), and an engaging wellness program Public Service Loan Forgiveness eligibility for full-time employees Tessera is dedicated to “Creating Opportunities for People with Disabilities” by hiring and supporting individuals with disabilities as well as veterans with disabilities. We take pride in our purpose-driven culture, our core values - Inclusion, Partnerships, Integrity - and our commitment to providing a safe and respectful work environment to our employees. Tessera seeks an experienced Engineering Technician II to lead mechanical, electrical, and plumbing (MEP) maintenance and reliability efforts at the United States Air Force Academy. In this role, you'll champion MEP asset management strategies-integrating CMMS, IoT sensors, and automation tools-conduct advanced system inspections, develop repair plans and technical specifications, and mentor junior technicians. Your expertise will drive preventive maintenance optimization, root-cause analysis, and ISO 55000-aligned asset initiatives to keep critical infrastructure mission-ready. Typical duties include but are not limited to: Configure and optimize CMMS (Maximo), RPA workflows, and BI dashboards for MEP asset management. Inspect HVAC, electrical distribution, plumbing, and fire‐protection systems; document issues and recommend corrective actions. Partner with MEP craftsmen to plan, execute, and verify maintenance tasks aligned with mission objectives. Develop and maintain job plans, CAD/Revit drawings, and technical specifications for MEP repairs and upgrades. Lead reliability initiatives-RCA, PM optimization, condition monitoring, ISO 55000-based asset analysis, and project prioritization. Mentor technicians, enforce USAFA/OSHA safety standards, and coordinate cross‐functional teams. Qualifications: Minimum 3-5 years of hands-on experience as an engineering technician in mechanical, electrical, and plumbing systems maintenance, reliability, and asset management. Associate degree in Civil Engineering Technology, Structural Engineering Technology, or related field; or equivalent military technical training required Bachelor's degree Mechanical, Electrical, Civil, or Facilities Engineering Technology-or a related field-is preferred. Proficiency with CMMS tools (IBM Maximo or equivalent), RPA platforms (e.g., UiPath), BI solutions, and IoT sensor technologies. Skilled in AutoCAD, Revit, or similar CAD software; strong grasp of MEP design principles and applicable building codes. Demonstrated ability to perform RCA, PM optimization, and data-driven asset performance analysis. Proven leadership: mentoring junior staff, coordinating federated teams, and communicating technical results to stakeholders. NICET certification or equivalent engineering-technician credential is a plus Physical Requirements: Employees must have the ability to perform the following physical demands for extended periods of time with or without assistance. The physical demands of this position may be reasonably accommodated for individuals with disabilities to perform the essential functions on a case-by-case basis. May be required to reach, kneel, walk, stand, and use repetitive motion for several hours at a time based on position duties. Work may require repetitive motion, reaching, lifting, kneeling, and walking. Standing or sitting for several hours at a time, climbing in and out of a vehicle, and up and down stairs may also be required. Must have the perseverance to work effectively under pressure for extended periods of time. Requirements: A valid state driver's license is required with the ability to obtain and maintain coverage by Tessera's insurance. Access to a federal military installation requires a REAL ID-compliant driver's license or an acceptable alternative, such as a U.S. passport or military ID, in accordance with the REAL ID Act. Please visit this website for more information: **************************** Must be able to obtain and maintain applicable security clearances and installation access. A background check and E-Verify will be conducted for this position. Union Affiliation: This position is represented by the International Brotherhood of Electrical Workers (IBEW), Local 113, and the United Association (UA), Local 58. *** Access to a federal military installation requires a REAL ID-compliant driver's license or an acceptable alternative, such as a U.S. passport or military ID, in accordance with the REAL ID Act. Please visit this website for more information: **************************** To Apply: Visit our website at *************** to complete an application. Current Employees: need to log into their Workday to apply through the Jobs Hub . Please reach out to your Recruiter if you need assistance. Tessera is a national non-profit, government contractor that is dedicated to “Creating Opportunities for People with Disabilities” through hiring and supporting individuals with disabilities and veterans with disabilities. We take pride in our mission-focused culture, our Core Values, Diversity, Partnership, Commitment, Integrity, and Quality, and our dedication to providing a safe and respectful work environment to our employees. Individuals with disabilities are encouraged to apply. Tessera is here to help you with the recruitment process. If you require an accommodation or support, please contact us at ************** ext. 349, or email **********************. Tessera is an Equal Opportunity Employer - Women/Minority/Veteran/Disabled - Tessera participates in E-Verify

Type: Non-Exempt Work Schedule: Full Time, Day Shift. On-call work may also be required based on operational needs. Compensation: $38.74 - $38.74 /hourly Deadline: December 31, 2025 Benefits: Tessera is proud to offer a comprehensive compensation and benefits package to our eligible part-time and full-time employees. Full-Time benefits of an Engineering Technician II at Tessera include: Medical, Dental, Vision, 401(k) retirement plan, Life & Short-Term Disability Insurance $8.78/hr Health and Welfare Benefit Flexible Spending Accounts for both medical and dependent care 11 paid federal holidays, accrual of 22 paid days of vacation at the start of employment. Potential shared earning bonus Tuition assistance is available after 1 year of employment and potential scholarships for qualified dependents Professional development, certifications, and training opportunities Verizon wireless discount Employee Assistance Program (EAP), and an engaging wellness program Public Service Loan Forgiveness eligibility for full-time employees Tessera is dedicated to “Creating Opportunities for People with Disabilities” by hiring and supporting individuals with disabilities as well as veterans with disabilities. We take pride in our purpose-driven culture, our core values - Inclusion, Partnerships, Integrity - and our commitment to providing a safe and respectful work environment to our employees. Tessera seeks an experienced Engineering Technician II to lead mechanical, electrical, and plumbing (MEP) maintenance and reliability efforts at the United States Air Force Academy. In this role, you'll champion MEP asset management strategies-integrating CMMS, IoT sensors, and automation tools-conduct advanced system inspections, develop repair plans and technical specifications, and mentor junior technicians. Your expertise will drive preventive maintenance optimization, root-cause analysis, and ISO 55000-aligned asset initiatives to keep critical infrastructure mission-ready. Typical duties include but are not limited to: Configure and optimize CMMS (Maximo), RPA workflows, and BI dashboards for MEP asset management. Inspect HVAC, electrical distribution, plumbing, and fire‐protection systems; document issues and recommend corrective actions. Partner with MEP craftsmen to plan, execute, and verify maintenance tasks aligned with mission objectives. Develop and maintain job plans, CAD/Revit drawings, and technical specifications for MEP repairs and upgrades. Lead reliability initiatives-RCA, PM optimization, condition monitoring, ISO 55000-based asset analysis, and project prioritization. Mentor technicians, enforce USAFA/OSHA safety standards, and coordinate cross‐functional teams. Qualifications: Minimum 3-5 years of hands-on experience as an engineering technician in mechanical, electrical, and plumbing systems maintenance, reliability, and asset management. Associate degree in Civil Engineering Technology, Structural Engineering Technology, or related field; or equivalent military technical training required Bachelor's degree Mechanical, Electrical, Civil, or Facilities Engineering Technology-or a related field-is preferred. Proficiency with CMMS tools (IBM Maximo or equivalent), RPA platforms (e.g., UiPath), BI solutions, and IoT sensor technologies. Skilled in AutoCAD, Revit, or similar CAD software; strong grasp of MEP design principles and applicable building codes. Demonstrated ability to perform RCA, PM optimization, and data-driven asset performance analysis. Proven leadership: mentoring junior staff, coordinating federated teams, and communicating technical results to stakeholders. NICET certification or equivalent engineering-technician credential is a plus Physical Requirements: Employees must have the ability to perform the following physical demands for extended periods of time with or without assistance. The physical demands of this position may be reasonably accommodated for individuals with disabilities to perform the essential functions on a case-by-case basis. May be required to reach, kneel, walk, stand, and use repetitive motion for several hours at a time based on position duties. Work may require repetitive motion, reaching, lifting, kneeling, and walking. Standing or sitting for several hours at a time, climbing in and out of a vehicle, and up and down stairs may also be required. Must have the perseverance to work effectively under pressure for extended periods of time. Requirements: A valid state driver's license is required with the ability to obtain and maintain coverage by Tessera's insurance. Access to a federal military installation requires a REAL ID-compliant driver's license or an acceptable alternative, such as a U.S. passport or military ID, in accordance with the REAL ID Act. Please visit this website for more information: **************************** Must be able to obtain and maintain applicable security clearances and installation access. A background check and E-Verify will be conducted for this position. Union Affiliation: This position is represented by the International Brotherhood of Electrical Workers (IBEW), Local 113, and the United Association (UA), Local 58. *** Access to a federal military installation requires a REAL ID-compliant driver's license or an acceptable alternative, such as a U.S. passport or military ID, in accordance with the REAL ID Act. Please visit this website for more information: **************************** To Apply: Visit our website at *************** to complete an application. Current Employees: need to log into their Workday to apply through the Jobs Hub . Please reach out to your Recruiter if you need assistance. Tessera is a national non-profit, government contractor that is dedicated to “Creating Opportunities for People with Disabilities” through hiring and supporting individuals with disabilities and veterans with disabilities. We take pride in our mission-focused culture, our Core Values, Diversity, Partnership, Commitment, Integrity, and Quality, and our dedication to providing a safe and respectful work environment to our employees. Individuals with disabilities are encouraged to apply. Tessera is here to help you with the recruitment process. If you require an accommodation or support, please contact us at ************** ext. 349, or email **********************. Tessera is an Equal Opportunity Employer - Women/Minority/Veteran/Disabled - Tessera participates in E-Verify

Basic Qualifications Candidates should demonstrate a thorough understanding of engineering technology. Engineering Interns must be enrolled in an accredited degree program in Computer Engineering, Systems Engineering, Software Engineering, Electrical Engineering, Mechanical Engineering or other related scientific or technical discipline with a preference for a standing of a sophomore or higher. Due to the nature of work performed within our facilities, U.S. citizenship is required. Responsibilities for this Position REPRESENTATIVE DUTIES AND TASKS: Apply your classroom-learned skills to a program supporting the defense of our country. GDMS has an immediate opening for an Engineering Intern to join our team. The position provides an opportunity to work on projects that support some of our nation's fundamental defense services. GDMS employees work closely with esteemed customers to develop solutions that allow them to carry out high-stakes national security missions. The selected candidate will work with collaborative teams on various technical projects associated with our core mission. In addition to receiving a competitive wage, the Engineering Intern will enhance their skill set by working among a talented and technically accomplished group of colleagues. Interns will also enjoy a flexible work environment where contributions are recognized and rewarded. ROLE AND POSITION OBJECTIVES: As a software engineer intern for the Smart Munitions team within Advanced Electronics Systems that is part of the Land and Air Systems LOB, you'll be a member of a cross functional team responsible for system design and analysis of software components responsible for the realization of complex GPS and Navigation systems. You'll contribute to CONOPS, requirements definition, software modeling, analysis, design, integration, test, and verification of these systems. We encourage you to apply if you have any of these preferred skills or experiences: Embedded Software; Automated testing; Programming experience in C, C++, Python. What sets you apart: Clear understanding of the software engineering concepts, principles, theories, software development process, and agile methodology Clear understanding of the software development process, with agile experience Ability to grasp and apply new information quickly and handle increasing responsibilities with growing complexity Team player who thrives in collaborative environments and revels in team success Commitment to ongoing professional development for yourself and others #LI-Hybrid Salary Note This estimate represents the typical salary range for this position based on experience and other factors (geographic location, etc.). Actual pay may vary. This job posting will remain open until the position is filled. Combined Salary Range USD $26.95 - USD $26.95 /Yr. Company Overview General Dynamics Mission Systems (GDMS) engineers a diverse portfolio of high technology solutions, products and services that enable customers to successfully execute missions across all domains of operation. With a global team of 12,000+ top professionals, we partner with the best in industry to expand the bounds of innovation in the defense and scientific arenas. Given the nature of our work and who we are, we value trust, honesty, alignment and transparency. We offer highly competitive benefits and pride ourselves in being a great place to work with a shared sense of purpose. You will also enjoy a flexible work environment where contributions are recognized and rewarded. If who we are and what we do resonates with you, we invite you to join our high-performance team! Equal Opportunity Employer / Individuals with Disabilities / Protected Veterans

SGP Recruiting provides both operations and strategic support to Tribal 8(a) and commercial organizations. Our client is a family of SBA-certified Native American Tribal 8(a) and multi-certified companies delivering IT, management consulting, and general construction solutions to the Federal Government and commercial sector. They are actively seeking a Engineering Technicians based in Colorado Springs, CO. This is a full-time, onsite position. This position requires an active Top Secret clearance with the ability to obtain Sensitive Compartmented Information (SCI). Engineering Technician 5 (Range $40-$45) (7) years of experience Engineering Technician 4 (Range $30-$35) (5) years of experience This is an exciting opportunity to be part of a team supporting a USSC NIWC contract in Colorado Springs, CO. The main responsibilities of the role include: Use hand and power tools to solder and crimp connectors along with various other IT and AV systems related tasks. Cabling installation of copper cable up to CAT6A and SM/MM Fiber Termination of copper cable up to CAT6A and SM/MM Fiber to MPO/MTP IT and AV rack installation and Wiring Projector and screen support structure installations. Mounting LCD/LED displays and video walls. Test point to point functionality of systems. Testing and recording of all cables. Travel to various job sites around Colorado Springs area. Candidates with experience installing systems on government sites will be rated more highly. Position requires a background check to include a DMV report, current and valid driver's license. Other duties assigned as needed. Skills and Abilities Effectively communicate with employees, customers, and colleagues. Ability to use hand and power tools in a safe and efficient manner. Ability to work and think independently and ensure to meet deadlines. Read and interpret electronic schematics and architectural blueprints. Education and/or Experience Minimum audio-visual installation experience required. Formal education in electronics or related field preferred. Minimum of a High School Diploma or equivalent required. External Training Avixa CTS and/or CTS-I certification, required. BICSI certification required. Vendor (Extron/AMX/Crestron/Biamp/Planar, CommScope, Corning, etc.) certification preferred. Clearance Requirement Technicians will be required to obtain SCI Government Security Clearance, most currently have Top Secret Clearance. Our client provides a variety of benefits including company-paid health, dental & vision insurance coverage, as well as additional employee-paid health insurance options; company-paid life and disability insurance; 401k retirement savings plan with employer match; 11 company paid holidays per year, and paid time off. Our client is committed to hiring and retaining a diverse workforce. They are proud to be an Equal Opportunity/Affirmative Action Employer, making decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected class. They are committed to a collaborative, inclusive environment that encourages authenticity and fosters a sense of belonging. We are also committed to providing accommodations for persons with disabilities.

* TS/SCI clearance required * BICSI Technician Certification required The Engineering Technician III will be supporting the buildup and modernization of USSC (United States Space Command) facilities around Colorado Springs. The purpose of this task is to provide Command, Control, Communications, Computers and Intelligence (C4I)/Information Technology (IT) electronic systems equipment, infrastructure, engineering, design, installation, and Supply and Warehouse support to Naval Information Warfare Center Pacific (NIWC Pacific) during design, installation, configuration, and transition to operations of the IT infrastructure for multiple facilities throughout the period of performance. Services required include design, installation, termination, test, and documentation of desktop devices, peripherals, IT cable plant, rack, power distribution units (PDU) and incident to the installation of C4I/IT electronic systems, installation of C4I/IT electronic systems equipment as assigned and in accordance with government installation design plans (IDP), the NIWC Pacific Shore Installation Process Handbook (SIPH) and project sponsor processes and associated logistical support. The work described herein is conducted within existing classified office spaces, IT data centers, IT telecommunications spaces or other spaces designated to house C4I/IT electronics systems equipment and newly constructed secure building. Chickasaw Nation Industries, Inc. serves as a holding company with multiple subsidiaries engaged in several lines of business (Technology, Infrastructure & Engineering, Health, Manufacturing, Public Safety, Consulting, and Transportation) for the federal government and commercial enterprises. A portion of our profits is used to support Chickasaw citizens. We are proud to support the economic development and long-term viability of the Chickasaw Nation and its people. CNI offers premium benefits eligible on the first day of hire to full time employees; (Medical - Dental - Vision), Company Life Insurance, Short-Term and Long-Term Disability Insurance, 401(K) Immediate Vesting, Professional Development Assistance, Legal Aid Assistance Program, Family Planning / Fertility Assistance, Personal Time Off, and Observance of Federal Holidays. As a federal contractor, CNI is a drug-free workplace and adheres to the Federal Controlled Substance Act. ESSENTIAL REQUIREMENTS * The ability to obtain, maintain and access classified information at the TS/SCI level. * BICSI Technician Certification * CTS preferred * CTS-D preferred * CTS-I preferred * Operational knowledge of Personal Computer Systems and Microsoft Office Suite * Practical knowledge of construction, service maintenance and operation procedures of IT and AV related systems and equipment. * Practical knowledge of IT and AV installation methods and techniques. * Knowledge of AV equipment assembly and testing. * Technical proficiency and effective problem-solving skills. * Excellent verbal and written communications skills with ability to create and interpret a variety of technical materials. * Excellent customer service and relationship-building skills and ability to effectively interact with others in the performance of assigned duties. * Ability to prepare, read and interpret engineering drawings, schematic diagrams and technical directives. * Ability to execute scheduled tasks with team. * Willingness and ability to learn new concepts and techniques. * Ability to effectively work both individually and in a team environment. * Ability to travel to client worksites on as needed basis within a 50-mile radius from the home duty station ESSENTIAL DUTIES AND RESPONSIBILITIES Essential duties and responsibilities include the following. Other duties may be assigned. * The Engineering Technician will provide support for cabling, equipment and C4ISR system installations. Pulls, terminates and dresses Category 6A and Fiber Optic cabling. Installs and documents IT equipment, cable conveyance, antennas and supporting systems. * Maintains required technical abilities to meet the demands of the job per instruction provided by team lead. * Contributes to all phases of the AV and IT infrastructure installation or upgrade as deemed appropriate by team lead. * Pulls and dresses fiber optic and Category 6A copper cables. * Installs of racks/cabinets/credenzas and all peripheral equipment. * Racks and stacks of equipment in racks/credenzas. * Terminates copper cable up to CAT6A and SM/MM Fiber single strand to MPO/MTP. * Helps to solve issues related to cables and networks with guidance and/ or instruction. * Tests and documents of all cables. * Installs of Thinklogical, Extron and Creston AV Matrix Routing and Extension Solutions. * Installs per a SIPH standard IDP, adapt/troubleshoot/modify where necessary, and provides redlines back to an AutoCAD drafter for As-built updates with proper guidance and instruction from team lead * Works with the team and is advised on ways to resolve technical/physical issues often requiring coordination with other disciplines: networking, facilities, HVAC, electrical, security, etc. * Conducts and documents PITCO activities as instructed. * Performs instructed assignments that are not completely standardized or prescribed as guided by the team lead. * Adapts standard procedures or equipment, using fully applicable precedents prescribed by team lead. * Receives initial instructions, equipment requirements, and advice from team lead, supervisor, engineer, as needed. Work is reviewed for technical adequacy or conformity with instructions. * Provides support in the demolition and disposal of current powers system equipment under supervision and instruction of electrician maintenance. * Conducts performance tests of IT and AV systems. EDUCATION / EXPERIENCE Associate degree, technical certification and/or a minimum of three (3) years' related experience supporting cabling, equipment and IT Network System Installation. Minimum three (3) years of troubleshooting and repairing systems. Minimum three (3) years' experience in using Microsoft office and other AV software programs; or equivalent combination of education/experience. PHYSICAL DEMANDS Work is primarily performed in a factory, machine shop or construction environment. The ability to verbally communicate alarms or warnings clearly, concisely, loudly and quickly, to clearly and quickly hear or otherwise sense alarms or warnings and take appropriate action. Frequently required to maintain equilibrium to prevent falling when moving, walking, standing, kneeling or crouching - particularly on narrow, uneven, irregular, slippery surfaces, going up or down ladders, stairs, scaffolding, ramps, poles or other objects using hands, arms, feet or legs. Frequently required to bend the body downward and forward, bending leg and spine - working in a bent over position. Frequently required to sense physical attributes such as size, shape, temperature, texture or sharpness of an object by touching. Frequently required to grasp, grip or apply pressure to an object with the fingers and palm, holding an object in the hand. Frequently required to lift, raise or lower objects in a vertical direction, particularly heavy or bulky objects. Moving objects backward, forward, in or out in a horizontal direction, particularly heavy or bulky objects. Pulling, exerting a steady backward, downward, upward or outward force against an object - jerking, plucking, wrenching, stretching, towing, drawing, dragging or tugging objects in a sustained motion. Pushing, pressing against something with steady forward, downward, upward or outward force - shoving, pushing, compressing, squeezing, mashing, packing, pressing, jamming, compacting, or squashing objects in a sustained motion. The ability to see and distinguish colors, to visually distinguish shapes and patterns, to accurately sense distances (depth perception), to accurately see objects and detect motion at wide angles (peripheral vision). Frequently uses the lower extremities and back muscles and moving on foot, particularly for long distances. May have exposure to indoor/outdoor adverse weather conditions. Frequent exposure to noise - workers must wear protective hearing equipment or frequently shout in order to be heard above the ambient noise level. Exposure to pollutants or allergens which can adversely affect the skin and/or the respiratory system such as gases, smoke, odors, mists, fumes, dust, chemicals, oils or solvents. Exposure to hazardous working conditions including moving machinery, electricity and/or working in high places. May be exposed to hot objects, flames or sparks. The job requires the use of protective equipment such as hard hats, respirators, aprons, gloves, special clothing, safety shoes and safety glasses The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of this job. EOE including Disability/Vet * Please note, that this position is contingent upon the award or funding. The essential duties, experience, education requirements, and salary are subject to change.* The estimated pay range for this role is $25.55 to $33.03 per hour, with the final offer contingent on location, skillset, and experience. CNI offers a comprehensive benefits package that includes: * Medical * Dental * Vision * 401(k) * Family Planning/Fertility Assistance * STD/LTD/Basic Life/AD&D * Legal-Aid Program * Employee Assistance Program (EAP) * Paid Time Off (PTO) - (11) Federal Holidays * Training and Development Opportunities Your application submission will be considered for all potential employment opportunities with Chickasaw Nation Industries (CNI). #INDCNI

Fort Carson, Colorado, US Austin, Texas, US Fort Cavazos, Texas, US San Antonio, Texas, US Technician 12502 Full-Time None $5 - $200000 Description & Qualifications** Description & Qualifications** If you enjoy working on high profile and challenging engineering projects supporting the US Army,Serco hasa great opportunityfor you! TheEngineering Technicianwill be part of adynamicteam at our Fort Carson, CO location. Bring yourexpertiseand collaborative skills to make an impact towards our military defense and safety of our Soldiers. Serco supports the US Army as a primecontractorfor their Next Generation Command and Control (NGC2) contract which supports implementing capabilities that enable the service to employ Command Posts (CP) across the operational spectrum. Our team develops, integrates, andmaintainsmodern and mobile solutions for an integrated CP infrastructure. You will be partof ateam that works closely with the customer and other Serco functional area teams to deliver quality systemsand associated supporting documentation. The team has been recognized by the Army Customer and the industry for theiroutstanding contributions to the contract and program. In this role, you will: + Plan and performroutine andnon-routinehardwareassembly andintegrationassignments of substantial variety and complexitythatare typically part of broader assignments. + Construct components, subunits, or simple models;adapt standard equipment; troubleshoot and correct malfunctions + Follow specific layout and scientific diagrams to construct and package simple devices and subunits of equipment + Performmoderate to complex vehicle integration tasks to include cable routing, metal work installations, and technical support to integrate, install,modify, and perform upgrades in support of C5ISR systems + Provide occasionalassistanceto related support areas including but not limited to kitting and warehouse operations + Use, care,andmaintaincrimp tools, heat gun, and various electrical and mechanical tools. + Troubleshoot basic electrical issues for equipment installed/integrated in military vehicles + Utilize various test, measurement, and diagnostic equipment (TMDE) (i.e.multimeters, clamp meters, spectrum analyzers, etc.) + Determineequipment malfunctionsand applyskill in restoring equipment operation + Fabricateorassistwith fabrication ofa variety ofradio frequency (RF), data, and power cables using solderingand crimp techniques + Assemble, integrate, and install various metal and electronic components + Read and interpret technical drawings for fabrication and installationof commercial and custom metal and electronic mounts and components + Apply your mechanical aptitude and experience with a range of hand and power tools + Occasionally work in austere conditions (field environments) + Travel to U.S. Army bases around the country to perform testing and maintenance on Army equipment installed by Serco Inc. To be successful in this role, you musthave: + A highschool diploma/GED with 3 years' of relevant experience + OR anassociatedegreewith1 year of relevant experience + Ability to travel up to 25%. Additionallydesiredexperience and skills: + Experience with military vehicles + Basic metal fabrication + Basic cable fabrication + Automotive/mechanical troubleshooting + Generator maintenance and troubleshooting + Experience with the integration of Army Tactical C5ISR systems and vehicle platforms + Fiber / BICSI / Certifications If you are interested in supporting and working with our military and a passionate Serco team,thensubmityour application now for immediate consideration. It only takes a few minutes and could change your career! **Company Overview** Serco Inc. (Serco) is the Americas division of Serco Group, plc. In North America, Serco's 9,000+ employees strive to make an impact every day across 100+ sites in the areas of Defense, Citizen Services, and Transportation. We help our clients deliver vital services more efficiently while increasing the satisfaction of their end customers. Serco serves every branch of the U.S. military, numerous U.S. Federal civilian agencies, the Intelligence Community, the Canadian government, state, provincial and local governments, and commercial clients. While your place may look a little different depending on your role, we know you will find yours here. Wherever you work and whatever you do, we invite you to discover your place in our world. Serco is a place you can count on and where you can make an impact because every contribution matters. To review Serco benefits please visit: ************************************************ . If you require an accommodation with the application process please email: ******************** or call the HR Service Desk at ************, option 1. Please note, due to EEOC/OFCCP compliance, Serco is unable to accept resumes by email. Candidates may be asked to present proof of identify during the selection process. If requested, this will require presentation of a government-issued I.D. (with photo) with name and address that match the information entered on the application. Serco will not take possession of or retain/store the information provided as proof of identity. For more information on how Serco uses your information, please see our Applicant Privacy Policy and Notice. Serco does not accept unsolicited resumes through or from search firms or staffing agencies without being a contracted approved vendor. All unsolicited resumes will be considered the property of Serco and will not be obligated to pay a placement or contract fee. If you are interested in becoming an approved vendor at Serco, please email ********************* . Serco is an equal opportunity employer. We evaluate qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, and other legally protected characteristics. **Pay Transparency** Our Total Rewards package includes competitive pay, performance-based incentives, and benefits that promote well-being and work-life balance-so you can thrive both professionally and personally. Eligible employees also gain access to a wide range of benefits from comprehensive health coverage and health savings accounts to retirement plans, life and disability insurance, and time-off programs that support work-life balance. Program availability may vary based on factors such as contract type, location, hire date, and applicable collective bargaining agreements. Salary range: The hourly amount for this position can be found at the top of this posting. This role is covered by the Service Contract Act. For positions on this contract, we will pay the prevailing wage rate for the location in which the employee is working, as determined by the Department of Labor and the Wage Determination (WD). The wage rate will vary depending on the locality. Additionally, you will receive Health and Welfare Benefits based on the WD for the contract. Benefits - Comprehensible benefits for full-time employees (part-time members receive a limited package tailored to their role): + Medical, dental, and vision insurance + Robust vacation and sick leave benefits, and flexible work arrangements where permitted by role or contract + 401(k) plan that includes employer matching funds + Tuition reimbursement program + Life insurance and disability coverage + Optional coverages that can be purchased, including pet insurance, home and auto insurance, additional life and accident insurance, critical illness insurance, group legal, ID theft protection + Birth, adoption, parental leave benefits + Employee Assistance Plan that includes counseling conditions + Specific benefits are dependent upon the specific contract as well as whether the position is covered by a collective bargaining agreement or Service Contract Labor Standards. To review all Serco benefits please visit: ******************************************* . Serco complies with all applicable state and local leave laws, including providing time off under the Colorado Healthy Families and Workplaces Act for eligible Colorado residents, in alignment with our policies and benefit plans. The application window for this position is for no more than 60 days. We encourage candidates to apply promptly after the posting date, as the position may close earlier if filled or if the application volume exceeds expectations. Please submit applications exclusively through Serco's external (or internal) career site. If an applicant has any concerns with job posting compliance, please send an email to: ******************** .

Eligible candidates may qualify for a sign-on bonus as part of our competitive compensation package. Onward Energy / Fountain Valley Power values the expertise and impact of top talent-apply today to explore this opportunity. POSITION DESCRIPTION Job Title: Instrument & Control Technician II (Senior Technician) Reports To: Operations & Maintenance Manager Direct Reports: No Functional Unit: Operations FLSA Status: Non-Exempt Position Type: Full-Time Plant Location: Colorado Springs, CO region Onward Energy / Fountain Valley Power is proud to offer a highly competitive compensation package that includes a robust benefits program and a performance-based bonus plan. Our benefits are designed to support the well-being of our employees and their families, while our bonus structure rewards individual and team contributions that drive our mission forward. THE COMPANY Onward Energy is an independent power platform that owns and operates over 7 GW of utility-scale wind, solar and natural gas generation projects across the U.S. Our Vision is to reliably power a sustainable future. Our Mission is that as North America's premier independent power generator, we will deliver renewable and reliable power to our customers, opportunities to our employees, sustainable returns to the families who invest in us, and a better world to the next generation. Corporate Offices in Denver, New York and Charlotte, we are where renewable meets reliable. See ******************** for more information. The Fountain Valley Facility is a 240 MW simple cycle, natural gas-fired, peaking facility with a PPA with PSCo to 2032. The plant is located in Fountain, Colorado. Adjacent to the Fountain Valley Facility is 145 vacant acres of land for future development. THE CHALLENGE Perform operations, testing, maintenance and administrative functions of a distributive control system (DCS) and all associated field devices including the Continuous Emission Monitoring System (CEMS) for a simple cycle gas power plant. THE RESPONSIBILITIES Administers processes and procedures as required by the O&M Manager, which includes: Identify and implement On-condition tasks. Evaluate recommended changes based on cost/benefit. Specify instrument and electrical changes as required. Required to complete the O&M Tech I qualification process. Qualification is required within 2 years of date of hire. Work safely, following company and operator policies, procedures, and work practices in a positive, cooperative, and productive manner. Computes and analyzes test data. Use installed and portable test equipment and technical manuals to troubleshoot equipment and systems. Monitor, maintain and review all system startup procedures to determine control and electrical personnel support requirements. Coordinates job activities relating to job planning, work methods, job standards and job reporting for the work assigned. Perform both routine and non-routine preventative and corrective maintenance on plant equipment. Assist other plant personnel as needed. Maintenance and upkeep of site buildings and grounds. Maintain, calibrate and repair plant instrumentation and control devices. Prepares, maintains and provides a variety of reports/documents as required or upon request. Reviews P&I Drawings and logic diagrams. Communicates condition of plant systems, equipment and pertinent information to others. Coordinates job activities relating to job planning, work methods, job standards and job reporting for the work assigned. Creates procedures related to instrumentation and electrical systems. Directs and performs work in accordance with policies and procedures as established by the company and regulatory agencies. Operate all plant mobile equipment, forklift, man lift, etc. Maintain documentation records of calibration, tests and certification of electrical and instrument equipment. May be required to support job responsibilities as needed outside of scheduled work hours. Occasional travel may be required. Other duties as assigned. THE PROFILE TO SUCCEED A two-year technical degree and a minimum of 5 years of power plant and/or industrial electrical, instrumentation or electronics experience is required. In lieu of a degree, significant power plant and/or industrial electrical or electronics experience may also qualify an applicant for this position. Experience with Distributed Control Systems (DCS), GE Mark VI and ABB Bailey INFI 90, Various PLC Controllers, Teledyne Monitor Labs CEMS controls and equipment. Programming and configuration capabilities preferred. Knowledge of equipment operating limits, parameters, operating procedures and systems. Performs corrective actions if limits are exceeded. Working knowledge of combined cycle power plant system, power plant operations, and maintenance, electrical principles, work practices, procedures and materials. Ability to interpret control drawings and P&ID's. Ability to make maintenance related decisions with minimum direct supervision. Knowledge of instrumentation test equipment, signal generators, relay tests sets, oscilloscopes and computers. Knowledge of industry related CEM System hardware, software and reporting. Strong verbal and written communication skills and interpersonal skills and possess the ability to learn. Strong mechanical aptitude with an advanced understanding of chemistry, physics, electricity and mathematics. Ability to follow both verbal and written instructions. Ability to exercise good judgment and make sound decisions. Excellent organizational skills with attention to detail, accuracy, and timeliness. Strong analytical and problem-solving skills. Ability to demonstrate basic computer knowledge of Word, Excel, Power Point and various other programs. Must be able to interact and communicate well with individuals in all areas of the company and outside vendors. Valid U.S. Driver license with acceptable MVR history, if applicable. THE PHYSICAL REQUIREMENTS Must be able to accomplish physical requirements with or without reasonable accommodation Adhere to large amounts of standing, walking, bending, squatting, and lifting. May be required to lift, carry, and move up to 50 lbs. Will use arms and hands to signal, grab, hold, turn, push, and pull objects, materials, controls and tools. Will occasionally work at heights, climb ladders, stairways, and work from platforms. Will use vision abilities to focus, see short and long distances, colors, depth perception and peripheral vision. Will be required to wear personal protective equipment (PPE) including but not limited to hard hat, safety glasses/goggles, ear plugs/muffs, masks/respirators, safety vests, gloves and steel-toe boots. Able to hear (at some dB limit of loss) plant alarms, equipment condition, and to receive oral instructions. Able to see to determine plant operating conditions and to avoid safety hazards. THE TEAM The Onward Energy team is comprised of industry professionals who embrace our values of accountability, adaptability, collaboration, and excellence. At Onward Energy, we seek to find solutions rather than assign blame. THE WORK ENVIRONMENT Performing this job without full/focused attention may cause serious injury or even fatality. Work is generally performed inside the power plant but may work in all weather conditions ranging from warm/hot - cool/cold. Occasional rain and snow. Noise levels will be moderate to high. Job site will contain light to heavy equipment vehicles, small to large equipment, materials, communication equipment and tools. People standing, walking, sitting, signaling and talking. Bells, whistles and alarms. THE TOTAL REWARDS Onward Energy total rewards philosophy is motivated by a key tenet of People First, and offers employees a comprehensive total rewards package which includes market competitive compensation, health, life insurance, and retirement savings benefits. If you require an accommodation for any part of the employment process due to a disability to ***************************. EEO STATEMENT: Onward Energy is an Affirmative Action Employer, Females/Minority/Veterans/Disabled/Sexual Orientation/Gender Identity. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.

We are Olsson. We engineer and design solutions that improve the world around us. As a company, we promise to always be responsive, transparent, and focused on results - for our people, our clients, and our company. We're a people-centric firm, so it's no surprise our greatest asset is our people. The impact this creates is an environment that encourages our people to grow and be creative with their talents. This approach builds a culture that is uniquely Olsson. It allows us to grow our people as we grow our business. This, in turn, creates a lasting impact on the world around us. Job Description Olsson's traffic experts provide clients with a single resource for traditional services such as traffic operations studies, pedestrian circulation studies, and intersection improvement/design projects. They are also proficient in more complex projects, including conducting citywide safety studies, signal timing, improving signal systems, and evaluating and designing Intelligent Transportation Systems (ITS). Traffic design includes traffic signals, roundabouts, pavement marking, signing, and temporary traffic control. As a Project Engineer for the Traffic/Technology team, you will independently make decisions regarding engineering complexities. You will generate ideas and create designs that provide purposeful, high-quality solutions to successfully solve engineering and design needs. You may supervise staff and provide guidance related largely to overall objectives, critical issues, and new concepts. Primary Responsibilities: Perform detailed engineering tasks such as project design, cost estimates, and design calculations utilizing advanced knowledge and experience. Prepare project documents and adhere to project scope, schedule, and budget to ensure alignment with project objectives. Independently perform complex assignments that require development of new and improved techniques and procedures. Coordinate across other Olsson teams and direct team members on design tasks. Work closely with project managers on execution of design work, report overall progress, and inform project managers of any potential challenges to ensure project goals and objectives are met. Assist with project scope of work and schedule or portions of them and may attend client meetings. May supervise, coordinate, and review work for less experienced staff members. Maintain project and client information in the firm's project management system. May travel and work in all types of terrain and weather conditions at project sites in various stages of construction. Qualifications You are passionate about: Working collaboratively with others. Having ownership in the work you do. Using your talents to positively affect communities. You bring to the team: Strong communication skills Ability to contribute and work well on a team Bachelor's degree in Civil Engineering Minimum of 6 (six) years traffic engineering experience Professional Engineer (PE) License #LI-IC1 Actual compensation will vary based on factors such as experience, qualifications, geographic location, skills, education, and internal equity. Colorado Pay Range$103,000-$135,000 USDAdditional Information Olsson specializes in engineering and design, client advisory services, planning, field services, and environmental. Improving the world has been our mindset from the very beginning, back when Olsson first opened for business in 1956. And it will be our mindset for years to come. As an Olsson employee, you will: Receive a competitive 401(k) match Be empowered to build your career with tailored development paths Have the possibility for flexible work arrangements Engage in work that has a positive impact on communities Participate in a wellness program promoting balanced lifestyles In addition, full-time employees will receive our traditional benefits package (health care, vision, dental, paid time off, etc.) and the opportunity to participate in a bonus system that rewards performance. Olsson is an Equal Opportunity Employer. We encourage qualified minority, female, veteran, and disabled candidates to apply and be considered for open positions. We do not discriminate against any applicant for employment or any employee because of race, color, religion, national origin, sex, sexual orientation, gender identity, gender, disability, age, military status, or other protected status. Olsson understands the importance of privacy and is committed to protecting job applicants' personal information. Pursuant to the California Consumer Privacy Act, as amended by the California Privacy Rights Act (collectively, the "CCPA"), this notice explains Olsson's practices regarding the collection, use, and disclosure of personal information for job applicants residing in California. Please read this Notice carefully to understand our privacy practices. For more information about the types of information we collect and how we use it in connection with your general access and use of our website, please review our general California Privacy Notice here.

Facility Programmer/Engineer Technician II Subsidiary: KIRA Training Services Job Title: Facility Programmer/Engineer Technician II Labor Category: Non-Exempt | CBA (Union) Clearance Level: Public Trust Travel Requirement: Up to 5% Pay Rate: $38.74 per hour Health and Welfare: $8.21 - $11.15/hr up to 40 hours per week to be used towards health insurance premiums At Tlingit Haida Tribal Business Corporation (THTBC), your work goes beyond the job description-it becomes part of a purpose-driven legacy. Our continuous commitment to growth directly contributes to the strength, resilience, and future of the communities we support. Our growth fuels programs, services, and lasting value for the Tribe, making every success a shared one. For over 35 years THTBC and its subsidiaries has delivered essential services to federal clients across the globe. Whether supporting logistics, information technology, cyber security, or facilities operations, we are united by a shared mission: to create meaningful economic opportunity and growth of the Tlingit & Haida Tribes of Alaska. Together We Grow - One Mission, One Team - With a Commitment to Serve Scope of Work: Primary purpose of this position is to perform updates to the Air Forces NexGen asset management database and produce reports as required, and performs cost estimates for Capital projects. Responsibilities: 3 years of Air Force Programming Experience Assists Programmer in Civil Engineering in complying with legal and regulatory requirements when finical programming MILCON, SRM O&M, Medical and NAF facility projects including preparing DD Form 1391s, Military Construction Project Data. Researches, interprets, analyzes, and applies proper Air Force Instructions (AFIs), especially AFI 32-1020, Planning and Programming Built Infrastructure Projects, Unified Facilities Criteria (UFC's), U.S. Code, guidelines, pamphlets, policies, letters, when finically programming facility and infrastructure projects. Monitors coordination/approval process for converting work requests into contract projects to include validating proper work classification during programming, design, and construction to ensure statutory project approval is obtained from the correct approval authority. Implements metrics and analyzes systems/processes to ensure actions are efficient, timely, and reviewed at critical points. Develop, plan, and ensure customer proponents justify capital improvement projects for USAFA facilities. Performs self-inspection in accordance with Air Force inspection criteria and prepares/presents detailed and comprehensive reports with any corrective action taken to the Portfolio Optimization Manager. Follows-up to ensure complete and quality resolution of discrepancies. Implement tracking procedures for all taskings and packages being coordinated. Ensures customer facility and infrastructure requirements are converted into facility projects that are properly documented, prioritized, authorized, approved, and funded (this is called “programming”) in accordance with all laws, policies, and regulations. This includes multiple facility funding sources such as Military Construction (MILCON), Sustainment, Restoration & Modernization (SRM) Operation and Maintenance (O&M), Medical, Non-Appropriated Funds (NAF) and Demolition. Maintains information in the NexGen asset management database and helps prepare presentations for and responses to installation leadership on facility project programs. Helps prepare initial planning cost estimates using parametric cost estimating tools for facilities and infrastructure maintenance, repair, and construction projects. Responsible for long, mid, and short-range project planning of tasks, providing day-to-day task management of subordinate programmers, and ensuring timely completion of tasks to meet all AF Civil Engineer Center, USAFA Staff, and internal program deadlines. Trains subordinates, project managers, other team members, and appropriate government personnel as appropriate on complex statutory driven programming requirements including NexGen asset management database, programming processes and procedures, document submittals, design reviews, executive secretariat responsibilities for running wing commander chaired Installation Facilities Board, other required meetings and AF required filing structure. Authorized to directly coordinate finical programming actions with government counterparts to ensure synchronized work efforts in building 5-year facility priority lists including planning, design, and construction projects. Responsible for daily task management of subordinate programmers. Adhere to company policies, procedures, and safety regulations. Performs other duties as assigned. Requirements: 2-5 years of experience working in Air Force Civil Engineering organizations or other military Services (Army, Navy, Coast Guard) Department of Public Works organizations providing programming, design, and/or construction documentation is preferred. Knowledge of the Civil Engineering and Air Force funding processes and funding sources including MILCON, O&M (SRM) and NAF. NAF funding includes privately funded and donor funded projects. Have a basic knowledge of Geo-base and proficiency with Microsoft Software (Excel, Word, Power Point, etc). Familiarity with Parametric Cost Engineering System (PACES) estimating software is strongly desired. BS degree in Architecture or Engineering from ABET accredited university program preferred. Must possess and maintain a valid state driver's license and a safe driving record, in accordance with company policy, to operate vehicles or equipment as required for the position. Physical Demands / Work Environment: Physical requirements include (but are not limited to) the ability to lift 60 pounds, pushing, pulling, carrying, stooping, bending, squatting, and reaching for long periods of time. Must be able to work on-call, alternate, and extended shift schedules when necessary to meet the mission requirements, including weekends and holidays. Work may be performed indoors or outdoors in varying weather conditions. Must be able to work in confined spaces, at heights, and around various hazards with appropriate PPE. All candidates must successfully complete pre-employment screening, which may include but is not limited to a criminal background check, motor vehicle record review, and a 5-panel drug test, in accordance with company policy and applicable laws. Benefits: We offer a flexible benefits package including medical, dental, and vision plans, TRICARE Supplemental, critical illness coverage, employee discounts, wellness seminars, company-paid life and short-term disability insurance, optional long-term disability, paid leave, a 401(k) plan, and identity theft protection to support your health and financial well-being. For represented positions, the benefits and leave offered will be as defined under the applicable Collective Bargaining Agreement. Equal Employment Opportunity: We are proud to be an equal opportunity employer and comply with all applicable federal, state, and local employment laws. All applicants will be considered for employment without regard to race, color, religion, creed, national origin, gender, gender identity, age, marital status, sexual orientation, veteran status, disability, pregnancy, parental status, or any other characteristic protected by law.

Facility Programmer/Engineer Technician II Subsidiary: KIRA Training Services Job Title: Facility Programmer/Engineer Technician II Labor Category: Non-Exempt | CBA (Union) Clearance Level: Public Trust Travel Requirement: Up to 5% Pay Rate: $38.74 per hour Health and Welfare: $8.21 - $11.15/hr up to 40 hours per week to be used towards health insurance premiums At Tlingit Haida Tribal Business Corporation (THTBC), your work goes beyond the job description-it becomes part of a purpose-driven legacy. Our continuous commitment to growth directly contributes to the strength, resilience, and future of the communities we support. Our growth fuels programs, services, and lasting value for the Tribe, making every success a shared one. For over 35 years THTBC and its subsidiaries has delivered essential services to federal clients across the globe. Whether supporting logistics, information technology, cyber security, or facilities operations, we are united by a shared mission: to create meaningful economic opportunity and growth of the Tlingit & Haida Tribes of Alaska. Together We Grow - One Mission, One Team - With a Commitment to Serve Scope of Work: Primary purpose of this position is to perform updates to the Air Forces NexGen asset management database and produce reports as required, and performs cost estimates for Capital projects. Responsibilities: 3 years of Air Force Programming Experience Assists Programmer in Civil Engineering in complying with legal and regulatory requirements when finical programming MILCON, SRM O&M, Medical and NAF facility projects including preparing DD Form 1391s, Military Construction Project Data. Researches, interprets, analyzes, and applies proper Air Force Instructions (AFIs), especially AFI 32-1020, Planning and Programming Built Infrastructure Projects, Unified Facilities Criteria (UFC's), U.S. Code, guidelines, pamphlets, policies, letters, when finically programming facility and infrastructure projects. Monitors coordination/approval process for converting work requests into contract projects to include validating proper work classification during programming, design, and construction to ensure statutory project approval is obtained from the correct approval authority. Implements metrics and analyzes systems/processes to ensure actions are efficient, timely, and reviewed at critical points. Develop, plan, and ensure customer proponents justify capital improvement projects for USAFA facilities. Performs self-inspection in accordance with Air Force inspection criteria and prepares/presents detailed and comprehensive reports with any corrective action taken to the Portfolio Optimization Manager. Follows-up to ensure complete and quality resolution of discrepancies. Implement tracking procedures for all taskings and packages being coordinated. Ensures customer facility and infrastructure requirements are converted into facility projects that are properly documented, prioritized, authorized, approved, and funded (this is called “programming”) in accordance with all laws, policies, and regulations. This includes multiple facility funding sources such as Military Construction (MILCON), Sustainment, Restoration & Modernization (SRM) Operation and Maintenance (O&M), Medical, Non-Appropriated Funds (NAF) and Demolition. Maintains information in the NexGen asset management database and helps prepare presentations for and responses to installation leadership on facility project programs. Helps prepare initial planning cost estimates using parametric cost estimating tools for facilities and infrastructure maintenance, repair, and construction projects. Responsible for long, mid, and short-range project planning of tasks, providing day-to-day task management of subordinate programmers, and ensuring timely completion of tasks to meet all AF Civil Engineer Center, USAFA Staff, and internal program deadlines. Trains subordinates, project managers, other team members, and appropriate government personnel as appropriate on complex statutory driven programming requirements including NexGen asset management database, programming processes and procedures, document submittals, design reviews, executive secretariat responsibilities for running wing commander chaired Installation Facilities Board, other required meetings and AF required filing structure. Authorized to directly coordinate finical programming actions with government counterparts to ensure synchronized work efforts in building 5-year facility priority lists including planning, design, and construction projects. Responsible for daily task management of subordinate programmers. Adhere to company policies, procedures, and safety regulations. Performs other duties as assigned. Requirements: 2-5 years of experience working in Air Force Civil Engineering organizations or other military Services (Army, Navy, Coast Guard) Department of Public Works organizations providing programming, design, and/or construction documentation is preferred. Knowledge of the Civil Engineering and Air Force funding processes and funding sources including MILCON, O&M (SRM) and NAF. NAF funding includes privately funded and donor funded projects. Have a basic knowledge of Geo-base and proficiency with Microsoft Software (Excel, Word, Power Point, etc). Familiarity with Parametric Cost Engineering System (PACES) estimating software is strongly desired. BS degree in Architecture or Engineering from ABET accredited university program preferred. Must possess and maintain a valid state driver's license and a safe driving record, in accordance with company policy, to operate vehicles or equipment as required for the position. Physical Demands / Work Environment: Physical requirements include (but are not limited to) the ability to lift 60 pounds, pushing, pulling, carrying, stooping, bending, squatting, and reaching for long periods of time. Must be able to work on-call, alternate, and extended shift schedules when necessary to meet the mission requirements, including weekends and holidays. Work may be performed indoors or outdoors in varying weather conditions. Must be able to work in confined spaces, at heights, and around various hazards with appropriate PPE. All candidates must successfully complete pre-employment screening, which may include but is not limited to a criminal background check, motor vehicle record review, and a 5-panel drug test, in accordance with company policy and applicable laws. Benefits: We offer a flexible benefits package including medical, dental, and vision plans, TRICARE Supplemental, critical illness coverage, employee discounts, wellness seminars, company-paid life and short-term disability insurance, optional long-term disability, paid leave, a 401(k) plan, and identity theft protection to support your health and financial well-being. For represented positions, the benefits and leave offered will be as defined under the applicable Collective Bargaining Agreement. Equal Employment Opportunity: We are proud to be an equal opportunity employer and comply with all applicable federal, state, and local employment laws. All applicants will be considered for employment without regard to race, color, religion, creed, national origin, gender, gender identity, age, marital status, sexual orientation, veteran status, disability, pregnancy, parental status, or any other characteristic protected by law.

**_INTERVIEWS FOR THIS ROLE WILL NOT BEGIN UNTIL LATE FEBRUARY, 2026_** **Compensation for this role** : **$22.00 TO $25.00 PER HOUR** **DEPENDING ON PREVIOUS INTERN EXPREIENCE IN THE CONSTRUCTION INDUSTRY** General Responsibilities Maintain open communication lines with all working relationships Follow up to ensure items for which the job is accountable are performed Earn and maintain team and customer's trust Uphold the core values of the organization Work well with others to accomplish the mission of the organization and of the job Specific Responsibilities Project Management Support Review specifications and performs material take offs Review and track submittals from vendors Track material relative to the job Maintain filing in the project manual and project Studio Generate letters and memos as required Write, log and track Request for Information (RFI) documents Estimating and Pricing May assist with preparation of estimates and proposals Maintain change request logs May assist with bid day estimate review Purchasing Obtain and de-scope quotes from vendors and submits to Project Engineer Track major material Assure material order complies with specifications based on research May determine tax rates and tax-exempt status for purchase orders, requisitions and subcontracts based on geographic area served, project type, and tax exempt status of client Will learn the fundamentals of purchase order and subcontract initiation and execution Field Liaison Will learn to perform lay out drawings to facilitate successful electrical installations Make copies and updates field with changes to the construction documents Perform 2-D AutoCad as necessary Update contract drawings with submittals, RFI, etc. Project Close Out Request assembles and submits Operations and Maintenance manuals and testing reports Update and submit as-built drawings Archive Operations and Maintenance Manuals and As-Built drawings Submit spare material as required for project close out Schedule and coordinate owner training and third party commissioning On-Site Only Track, receive, and coordinate staging of committed material Inspect equipment as received for damage and whether or not items received are correct as compared to bill of material and submittals Maintain on-site project manuals Other duties as may be assigned KNOWLEDGE, SKILLS AND ABILITIES: Knowledge of: General Construction Standards (Electrical Construction Standards are preferred) National Electric Code Skill in: Decision making Adapting to new and changing requirements, environments, and/or information Estimating resources needed to complete required tasks Managing duties and tasks and breaking them down to their component levels Use of communication software and hardware Business writing and etiquette Effective written and oral communication sufficient to be able to elicit and communicate information and achieve understanding Establishing and maintaining effective working relationships with customers, vendors, consultants, management, and employees Operating a computer Microsoft Office Suite Bluebeam Organizing work to accomplish tasks through effective time management Multitasking Prioritizing and reprioritizing to meet job needs Problem solving Tracking numbers and bits of data relevant to the work assignment REQUIREMENTS: This position requires a high school diploma with completion of a sophomore level college curriculum in construction management or related field, or experience in the construction field strongly preferred. Experience in electrical industry and a positive attitude, sense of urgency, initiative and attention to detail, and ability to problem solve is also preferred. **Benefits of this role:** + Encore Electric provides excellent benefits for our employees, including: **medical, dental, and vision plans, disability, and life insurance, employee-matched 401(k)*, paid time off (PTO), an employee assistance program that includes counseling, legal, and financial advice.** + Encore also provides a generous employee referral program, and access to technical, safety, personal finance, and leadership training through Encore University, Encore's in house training program. *must be 18 years of age to participate in 401k program **Applications will close for this position on: May 1st, 2026 OR UNTIL ALL THE OPENINGS HAVE BEEN FILLED.** _To request an accommodation during the application process, please contact_ ********************* _._ Encore Electric, Inc. is an EOE, including disability/vets. Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights (**************************** notice from the Department of Labor.

ARKA Group L.P. (“ARKA”) is an advanced technologies company serving the U.S. military, intelligence community, and commercial space industry delivering next-generation solutions to support the national security space enterprise. Built on more than six decades of excellence, ARKA brings modern approaches and a culture of innovation to the challenges of today. Join the ARKA team to learn how Beyond Begins Here. Discover your next internship and career opportunity now! Position Overview: ARKA Group is seeking summer test engineering interns who are passionate about working closely with our team to solve difficult mission-critical challenges. In this important role, you will be working on TestExec -our Automated Testing Framework to automate data collection, analysis, and test procedures. Responsibilities: Design tests for ground and/or space communication systems both individually and within a group environment Work with test and measurement equipment such as oscilloscopes, spectrum analyzers, network analyzers, signal generators, etc. Conduct automated and manual testing of applications controlling integrated hardware and peripheral equipment while supporting/enhancing existing software products as necessary Automate test procedures using python scripting Collaborate with other engineering disciplines to implement tests and validate test results Support Test Planning by mapping requirements to Test Procedures for Factory Acceptance Tests Use your engineering skills to analyze, design, and implement automated scripts within complex systems Required Qualifications: Currently pursuing a STEM degree 1+ semester of experience with Object Oriented development 0-1+ years of experience in a lab environment Experience with the Linux Operating System Experience with version control tools, such as GitLab Preferred Qualifications: 1+ years of experience Python Development Experience with the use of lab equipment, such as oscilloscopes, spectrum analyzers, signal generators, power supplies, and digital multi-meters is a plus Experience with python numpy and matplotlib libraries for data analysis Pay Range: $23.00/hr - $29.00/hr The application window will close in 120 days for this position. Location: Colorado Springs, CO This position is based out of ARKA's Colorado Springs, CO campus. If you like city life, but also enjoy the great outdoors, Colorado Springs is the place for you. The city rests at the base of Pikes Peak. The 14,115-foot summit is just one of dozens of area attractions, including scenic trains, museums, parks, a zoo and more. With a mild climate and plenty of sunshine, the Springs boasts some of the state's best recreation opportunities. The city is also known for its robust high-tech and sports industries. We are home to the U.S. Air Force Academy and four military bases and with the Olympic Training Center and dozens of sports federations nearby, it's common to spot world-class athletes around town. When you choose to join the ARKA Student Program, you will: Gain hands-on experience in your chosen field and share your unique ideas and creative problem-solving skills to help us continue our legacy of innovation Flourish and seamlessly develop great relationships with co-workers Network with students from other universities Participate in activities that support our local communities Work alongside our talented team, including employees who started as interns or co-ops Enjoy companywide employee activities Receive competitive compensation and paid holidays EHS/Environmental Requirements: While performing the duties of this job, the employee is required to communicate, listen to, and interpret instructions, occasionally operate tools and/or machinery with hands and arms and remain stationary for extended periods of the time. The employee will use protective equipment when working with chemicals, move between workstations, reach, and replace equipment, and move items weighing up to 25 lbs. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the job. Applicants are invited to apply for a reasonable accommodation to perform the essential duties of the job. To apply, send a request to ***************** or contact ************ and press 2 for Human Resources. ITC & Security Clearance Requirements: This position requires the incumbent to access export-controlled information. If you are not a U.S. Person, any offer is contingent upon the Company's ability to obtain a special license granting you access. This could take several months. You will not be able to begin employment until such license is obtained. Visa Restrictions: No visa sponsorship is available for this position. Pre-employment Screenings: Employment with any ARKA companies in the U.S. is contingent upon satisfactory completion of several pre-employment requirements to include a credit check, background check, and drug screen.

Astek is accepting resumes for a part-time, temporary Electronics Technician reporting to Astek's Manufacturing Engineer in Colorado Springs, CO. Electronics Technician Responsibilities: * Production test processing of electronic boards and chassis * Troubleshoot and repair defects in printed wiring boards and electronic chassis * Inspect electronic boards to IPC class 2 requirements * Perform component level rework, including fine pitch component replacement, wire-adds and pcb repairs * Provide test station maintenance and upgrades and keep their software and operating systems up to date * Provide manufacturing tryouts for new or updated manufacturing test software and for new firmware * Update firmware on existing stocked product that needs the latest firmware loaded before shipment * Assist with writing test and assembly procedures, and review/improve existing procedures * Contribute to production yield reporting * Assist with packaging and shipping Astek products Basic Skills Requirement: * Component level troubleshooting and repair * Fine pitch soldering and rework * Light assembly * Ability to read schematic, and perform rework based on schematic markups without assistance * Experience running test programs for electronic products using windows platforms * Good fundamental knowledge of electronics * Experience with the use of laboratory equipment such as oscilloscopes and multimeters * Ability to identify circuit board and circuit assembly defects, such as solder shorts, bad solder joints and damaged or contaminated components Candidates must have US citizenship or current authorization to work in the US. At this time, Astek is not offering travel expenses for interviews or relocation expenses and candidates should already be located in the Colorado Springs area. Interested applicants should email a resume and a short cover letter describing your background and any points of emphasis that you feel would make you an ideal candidate for Astek to This email address is being protected from spambots. You need JavaScript enabled to view it..

DUTIES AND RESPONSIBILITIES: The following job functions are not all-inclusive. The employee will be required to perform other job-related tasks/responsibilities requested by the supervisor. Job duties may change as required by needs of the company. Review project instructions and blueprints to ascertain specifications, procedures and objectives. Compute mathematical formulas to develop and design detailed specifications for components or machinery using computer aided equipment. Coordinate with and consult other workers to design, layout, or detail components and systems to resolve design issues or problems. Conduct DXF preparation or modification as needed. Inspect lines or figures for clarity and correct erroneous drawings. Design scale or full-size blueprints of equipment and components. Layout and draw schematic, orthographic or angle views to depict functional relationships of components, assemblies, systems, and machines. Check the dimensions of materials, components or assemblies for conformance. Evaluate designs by measuring drawing dimensions and comparing with original specifications for conformance. Review and determine basic specifications from existing product calculators and worksheets. Collaborate with Customer Service, Engineering, and Manufacturing on coordination design and scheduling needs of the product to meet the customer's needs. Process shop floor changes as required using the appropriate procedures to provide proper documentation for production. Perform all clerical and application tasks associated with the Engineering department using the existing software and electronic processes including, but not limited to SAP, Excel, Work, and Outlook. Prepare drawings, BOMs, and necessary documentation to ensure smooth and accurate flow of product production. This requires working knowledge of SAP, Autodesk and Windows Office. Confirm and process replacement part orders to the extent of providing production with proper documentation. Perform other duties as assigned by Supervisor. Responsibilities are subject to change based on the supervisor's direction. Contribute and support to maintaining a safe work environment for yourself and your fellow co-workers and comply with all company policies and procedures as required. Ability to work under tight deadlines not limited to working overtime or alternate shifts. QUALIFICATIONS: Possess and display Interroll' s Values at all times: Long-Term Thinking Committed to Excellence Always Respectful Passionate about Customers Prefer 1 year of sales, customer service and/or data entry experience. Prefer 2 years of experience in a Manufacturing/Engineering environment, including drafting. Required Possess an associate degree or vocational certification training in computer design/drafting fields. Possess a knowledge of Autodesk, Microsoft Office and ERP systems. Willing to work the 2nd shift and occasional weekends. MISSION: To achieve sustained profitable growth through employee commitment to innovative products, quality processes and exceptional service. PHYSICAL DEMANDS: This position requires prolonged periods of sitting at a desk and working on a computer. Incumbent must be able to occasionally lift and carry up to 50 pounds. The employee is regularly required to use hands/fingers to feel, and handle; the employee must regularly reach with hands and arms. The employee is occasionally required to walk, stoop, kneel, crouch, crawl, talk and hear. Specific vision abilities required by this job include close vision, color vision, and the ability to adjust focus. The noise level in the work environment is regular factory noises and is generally loud. Wearing the proper PPE (protective eyewear, ear plugs and steal toed shoes) is a requirement in most areas of this facility.

Join Amrize as a Automation Engineering Intern (Summer 2026) and help construct whats next. If you're ready to put your skills to work on projects that matter - and build a career with a company that's building North America - we want to hear from you! Driven by our purpose: Building progress for people and the planet. We are transforming to become the leader in innovative and sustainable building solutions. Amrize offers an unparalleled range of innovative cement, aggregates, asphalt, concrete products and construction services that have been the foundation for infrastructure projects across the globe. To move the industry forward to a greener future we need people who are passionate about sustainability, are driven to shape and influence perception and keen to build, grow and thrive in our high-performance culture. ABOUT THE ROLE As we continue to look for more sustainable ways to build, we need world-class talent to join our team. We are seeking an Automation Engineering Intern for Summer 2026 who is passionate about sustainability, driven by curiosity and keen to grow, learn, develop and thrive in our high-performance culture. This opportunity will be a 10-week, paid internship beginning May 27th, 2026. This internship will be based at our site in Portland, CO. WHAT YOU'LL BE DOING * Demonstrates a commitment to communicating, improving and adhering to safety policies in all work environments and areas. * Preparing estimates and budgets. * Creating accurate project specifications. * Designing engineering experiments. * Creating technical reports. * Completing regulatory documents concerning safety issues. * Finishing projects on time and within budget. * Communicating with clients and coworkers about analysis results. WHAT WE ARE LOOKING FOR We are looking for enthusiastic students who meet the following criteria: * Currently enrolled in an undergraduate program majoring in Computer Science, Electrical/Instrumentation, or Process Controls Engineering. * Strong academic performance with a solid understanding of engineering principles. * Geographic flexibility to work at various sites. * Excellent communication skills, both oral and written. * High energy and a proactive approach to tackling new challenges. * A team player who can collaborate across different levels of the organization. * Willingness to spend significant time in the field, gaining hands-on experience and firsthand knowledge of our business operations. SCHEDULE AND ENVIRONMENT * Work Schedule: This is an onsite role with a mandatory 40-hour work week, Monday through Friday, working an 8-hour shift each day. * In this internship position, you will be working in a cement manufacturing/production environment. Within this environment, you will be exposed to moving mechanical equipment, airborne particles, outside weather conditions, and more. * You will be responsible for your own transportation to and from your worksite for the summer. * Throughout the duration of your internship, you may be required to travel for site tours, shadow experiences, or intern events. BENEFITS OF OUR INTERNSHIP PROGRAM * Experience within the building materials industry. * Mentorship and professional development training throughout the summer. * A culture that promotes diversity, teamwork, work/life balance, and recognition. * Learn about the industry from all levels of Amrize management. * Potential opportunity, upon graduation, for full-time employment with a successful, fast-growing company! BUILDING INCLUSIVE WORKSPACES At Amrize, there is endless opportunity for you to play your part. Whether you're in a technical, managerial, or frontline role, you can shape a career that works for you. We're seeking builders, creative thinkers and innovators. Come put your expertise to work while developing the knowledge and skills to drive your career forward. With us you'll have the chance to build your ambition! Amrize North America Inc. takes pride in our hiring processes and our commitment that all qualified applicants will receive consideration for employment without regard to age, race, color, ethnicity, religion, creed, national origin, ancestry, gender, gender identity, gender expression, sex, sexual orientation, marital status, pregnancy, parental status, genetic information, citizenship, physical or mental disability, past, current, or prospective service in the uniformed services, or any other characteristic protected by applicable federal, state or local law. Amrize North America Inc, and its respective subsidiaries are Equal Opportunity Employers, deciding all employment on the basis of qualification, merit and business need. Amrize Canada Inc. is committed to the principles of employment equity and encourages the applications from women, visible minorities, and persons with disabilities. In compliance with the ADA Amendments Act (ADAAA), if you have a disability and would like to request accommodation in order to apply for a position with us, please email recruiting-accommodations@amrize.com. This email address should only be used for accommodations and not general inquiries or resume submittals. In Ontario, our organization/business is committed to fulfilling our requirements under the Accessibility for Ontarians with Disabilities Act. Under the Act, accommodations are available on request for candidates taking part in all aspects of the selection process. While we sincerely appreciate all applications, only candidates selected for an interview will be contacted.

Type: Non-Exempt Work Schedule: Full Time, Day Shift. On-call work may also be required based on operational needs. Compensation: $35.97 - $35.97 /hourly Deadline: December 31, 2025 Benefits: Tessera is proud to offer a comprehensive compensation and benefits package to our eligible part-time and full-time employees. Full-Time benefits of an Engineering Technician I at Tessera include: Medical, Dental, Vision, 401(k) retirement plan, Life & Short-Term Disability Insurance $8.78/hr Health and Welfare Benefit Flexible Spending Accounts for both medical and dependent care 11 paid federal holidays, accrual of 22 paid days of vacation at the start of employment. Potential shared earning bonus Tuition assistance is available after 1 year of employment and potential scholarships for qualified dependents Professional development, certifications, and training opportunities Verizon wireless discount Employee Assistance Program (EAP), and an engaging wellness program Public Service Loan Forgiveness eligibility for full-time employees Tessera is dedicated to “Creating Opportunities for People with Disabilities” by hiring and supporting individuals with disabilities as well as veterans with disabilities. We take pride in our purpose-driven culture, our core values - Inclusion, Partnerships, Integrity - and our commitment to providing a safe and respectful work environment to our employees. Tessera is seeking a dedicated, detail-oriented, and forward-thinking Engineering Technician I to drive structural maintenance and reliability initiatives at USAFA. In this entry-level role, you'll integrate and configure CMMS and digital maintenance platforms, conduct thorough building and infrastructure inspections, and assist in crafting job plans, drawings, and repair specifications. You'll also support preventive maintenance optimization and root-cause analysis through data-driven reviews, collaborate with engineers and operational teams to identify high-ROI improvement projects, and help ensure all structural assets remain safe, operational, and mission-ready. Typical duties include but are not limited to: Integrate and configure CMMS tools (e.g., IBM Maximo), mobile platforms, RPA, and BI solutions to streamline asset inspections, work scheduling, and eProcurement. Conduct structural inspections of buildings and infrastructure, document conditions and measurements, and assist in developing/updating job plans, drawings, and repair specifications. Support reliability processes-root cause analysis (RCA), preventive maintenance (PM) optimization, asset inventory, condition monitoring (including SMS), and IoT sensor integration. Coordinate and track RAM eLearning and professional development initiatives, promoting certification and team growth. Contribute to annual and strategic planning by identifying high-ROI reliability and recapitalization projects. Prepare routine reports and status updates for site leads, process owners, and the RAM director, and ensure compliance with USAFA and OSHA safety regulations. Qualifications: Minimum 1-3 years of relevant experience in structural maintenance, asset management, or reliability engineering Associate degree in Civil Engineering Technology, Structural Engineering Technology, or related field; or equivalent military technical training required Bachelor's degree in Civil Engineering, Civil Engineering Technology, or related discipline preferred Familiarity with IBM Maximo or similar computerized maintenance management systems Basic proficiency in AutoCAD, Revit, or equivalent CAD software Understanding of fundamental structural engineering principles and building codes Proficient in Microsoft Office suite; exposure to BI tools or dashboards Experience with robotic process automation platforms (e.g., UiPath) and IoT integrations Knowledge of ISO 55000 asset management standards NICET certification or equivalent engineering technician credential preferred Physical Requirements: Employees must have the ability to perform the following physical demands for extended periods of time with or without assistance. The physical demands of this position may be reasonably accommodated for individuals with disabilities to perform the essential functions on a case-by-case basis. May be required to reach, kneel, walk, stand, and use repetitive motion for several hours at a time based on position duties. Work may require repetitive motion, reaching, lifting, kneeling, and walking. Standing or sitting for several hours at a time, climbing in and out of a vehicle, and up and down stairs may also be required. Must have the perseverance to work effectively under pressure for extended periods of time. Requirements: A valid state driver's license is required with the ability to obtain and maintain coverage by Tessera's insurance. Access to a federal military installation requires a REAL ID-compliant driver's license or an acceptable alternative, such as a U.S. passport or military ID, in accordance with the REAL ID Act. Please visit this website for more information: **************************** Must be able to obtain and maintain applicable security clearances and installation access. A background check and E-Verify will be conducted for this position. Union Affiliation: This position is represented by the International Brotherhood of Electrical Workers (IBEW), Local 113, and the United Association (UA), Local 58. *** Access to a federal military installation requires a REAL ID-compliant driver's license or an acceptable alternative, such as a U.S. passport or military ID, in accordance with the REAL ID Act. Please visit this website for more information: **************************** To Apply: Visit our website at *************** to complete an application. Current Employees: need to log into their Workday to apply through the Jobs Hub . Please reach out to your Recruiter if you need assistance. Tessera is a national non-profit, government contractor that is dedicated to “Creating Opportunities for People with Disabilities” through hiring and supporting individuals with disabilities and veterans with disabilities. We take pride in our mission-focused culture, our Core Values, Diversity, Partnership, Commitment, Integrity, and Quality, and our dedication to providing a safe and respectful work environment to our employees. Individuals with disabilities are encouraged to apply. Tessera is here to help you with the recruitment process. If you require an accommodation or support, please contact us at ************** ext. 349, or email **********************. Tessera is an Equal Opportunity Employer - Women/Minority/Veteran/Disabled - Tessera participates in E-Verify

Basic Qualifications Candidates should demonstrate a thorough understanding of engineering technology. Engineering Interns must be enrolled in an accredited degree program in Computer Engineering, Systems Engineering, Software Engineering, Electrical Engineering, Mechanical Engineering or other related scientific or technical discipline with a preference for a standing of a sophomore or higher. Due to the nature of work performed within our facilities, U.S. citizenship is required. Responsibilities for this Position REPRESENTATIVE DUTIES AND TASKS: Apply your classroom-learned skills to a program supporting the defense of our country. GDMS has an immediate opening for an Engineering Intern to join our team. The position provides an opportunity to work on projects that support some of our nation's fundamental defense services. GDMS employees work closely with esteemed customers to develop solutions that allow them to carry out high-stakes national security missions. The selected candidate will work with collaborative teams on various technical projects associated with our core mission. In addition to receiving a competitive wage, the Engineering Intern will enhance their skill set by working among a talented and technically accomplished group of colleagues. Interns will also enjoy a flexible work environment where contributions are recognized and rewarded. ROLE AND POSITION OBJECTIVES: As a software engineer intern for the Smart Munitions team within Advanced Electronics Systems that is part of the Land and Air Systems LOB, you'll be a member of a cross functional team responsible for system design and analysis of software components responsible for the realization of complex GPS and Navigation systems. You'll contribute to CONOPS, requirements definition, software modeling, analysis, design, integration, test, and verification of these systems. We encourage you to apply if you have any of these preferred skills or experiences: Embedded Software; Automated testing; Programming experience in C, C++, Python. What sets you apart: Clear understanding of the software engineering concepts, principles, theories, software development process, and agile methodology Clear understanding of the software development process, with agile experience Ability to grasp and apply new information quickly and handle increasing responsibilities with growing complexity Team player who thrives in collaborative environments and revels in team success Commitment to ongoing professional development for yourself and others #LI-Hybrid Salary Note This estimate represents the typical salary range for this position based on experience and other factors (geographic location, etc.). Actual pay may vary. This job posting will remain open until the position is filled. Combined Salary Range USD $26.95 - USD $26.95 /Yr. Company Overview General Dynamics Mission Systems (GDMS) engineers a diverse portfolio of high technology solutions, products and services that enable customers to successfully execute missions across all domains of operation. With a global team of 12,000+ top professionals, we partner with the best in industry to expand the bounds of innovation in the defense and scientific arenas. Given the nature of our work and who we are, we value trust, honesty, alignment and transparency. We offer highly competitive benefits and pride ourselves in being a great place to work with a shared sense of purpose. You will also enjoy a flexible work environment where contributions are recognized and rewarded. If who we are and what we do resonates with you, we invite you to join our high-performance team! Equal Opportunity Employer / Individuals with Disabilities / Protected Veterans

Type: Non-Exempt Work Schedule: Full Time, Day Shift. On-call work may also be required based on operational needs. Compensation: $35.97 - $35.97 /hourly Deadline: December 31, 2025 Benefits: Tessera is proud to offer a comprehensive compensation and benefits package to our eligible part-time and full-time employees. Full-Time benefits of an Engineering Technician I at Tessera include: Medical, Dental, Vision, 401(k) retirement plan, Life & Short-Term Disability Insurance $8.78/hr Health and Welfare Benefit Flexible Spending Accounts for both medical and dependent care 11 paid federal holidays, accrual of 22 paid days of vacation at the start of employment. Potential shared earning bonus Tuition assistance is available after 1 year of employment and potential scholarships for qualified dependents Professional development, certifications, and training opportunities Verizon wireless discount Employee Assistance Program (EAP), and an engaging wellness program Public Service Loan Forgiveness eligibility for full-time employees Tessera is dedicated to “Creating Opportunities for People with Disabilities” by hiring and supporting individuals with disabilities as well as veterans with disabilities. We take pride in our purpose-driven culture, our core values - Inclusion, Partnerships, Integrity - and our commitment to providing a safe and respectful work environment to our employees. Tessera is seeking a dedicated, detail-oriented, and forward-thinking Engineering Technician I to drive structural maintenance and reliability initiatives at USAFA. In this entry-level role, you'll integrate and configure CMMS and digital maintenance platforms, conduct thorough building and infrastructure inspections, and assist in crafting job plans, drawings, and repair specifications. You'll also support preventive maintenance optimization and root-cause analysis through data-driven reviews, collaborate with engineers and operational teams to identify high-ROI improvement projects, and help ensure all structural assets remain safe, operational, and mission-ready. Typical duties include but are not limited to: Integrate and configure CMMS tools (e.g., IBM Maximo), mobile platforms, RPA, and BI solutions to streamline asset inspections, work scheduling, and eProcurement. Conduct structural inspections of buildings and infrastructure, document conditions and measurements, and assist in developing/updating job plans, drawings, and repair specifications. Support reliability processes-root cause analysis (RCA), preventive maintenance (PM) optimization, asset inventory, condition monitoring (including SMS), and IoT sensor integration. Coordinate and track RAM eLearning and professional development initiatives, promoting certification and team growth. Contribute to annual and strategic planning by identifying high-ROI reliability and recapitalization projects. Prepare routine reports and status updates for site leads, process owners, and the RAM director, and ensure compliance with USAFA and OSHA safety regulations. Qualifications: Minimum 1-3 years of relevant experience in structural maintenance, asset management, or reliability engineering Associate degree in Civil Engineering Technology, Structural Engineering Technology, or related field; or equivalent military technical training required Bachelor's degree in Civil Engineering, Civil Engineering Technology, or related discipline preferred Familiarity with IBM Maximo or similar computerized maintenance management systems Basic proficiency in AutoCAD, Revit, or equivalent CAD software Understanding of fundamental structural engineering principles and building codes Proficient in Microsoft Office suite; exposure to BI tools or dashboards Experience with robotic process automation platforms (e.g., UiPath) and IoT integrations Knowledge of ISO 55000 asset management standards NICET certification or equivalent engineering technician credential preferred Physical Requirements: Employees must have the ability to perform the following physical demands for extended periods of time with or without assistance. The physical demands of this position may be reasonably accommodated for individuals with disabilities to perform the essential functions on a case-by-case basis. May be required to reach, kneel, walk, stand, and use repetitive motion for several hours at a time based on position duties. Work may require repetitive motion, reaching, lifting, kneeling, and walking. Standing or sitting for several hours at a time, climbing in and out of a vehicle, and up and down stairs may also be required. Must have the perseverance to work effectively under pressure for extended periods of time. Requirements: A valid state driver's license is required with the ability to obtain and maintain coverage by Tessera's insurance. Access to a federal military installation requires a REAL ID-compliant driver's license or an acceptable alternative, such as a U.S. passport or military ID, in accordance with the REAL ID Act. Please visit this website for more information: **************************** Must be able to obtain and maintain applicable security clearances and installation access. A background check and E-Verify will be conducted for this position. Union Affiliation: This position is represented by the International Brotherhood of Electrical Workers (IBEW), Local 113, and the United Association (UA), Local 58. *** Access to a federal military installation requires a REAL ID-compliant driver's license or an acceptable alternative, such as a U.S. passport or military ID, in accordance with the REAL ID Act. Please visit this website for more information: **************************** To Apply: Visit our website at *************** to complete an application. Current Employees: need to log into their Workday to apply through the Jobs Hub . Please reach out to your Recruiter if you need assistance. Tessera is a national non-profit, government contractor that is dedicated to “Creating Opportunities for People with Disabilities” through hiring and supporting individuals with disabilities and veterans with disabilities. We take pride in our mission-focused culture, our Core Values, Diversity, Partnership, Commitment, Integrity, and Quality, and our dedication to providing a safe and respectful work environment to our employees. Individuals with disabilities are encouraged to apply. Tessera is here to help you with the recruitment process. If you require an accommodation or support, please contact us at ************** ext. 349, or email **********************. Tessera is an Equal Opportunity Employer - Women/Minority/Veteran/Disabled - Tessera participates in E-Verify

* TS/SCI clearance required * BICSI Technician Certification required The Engineering Technician IV will be supporting the buildup and modernization of USSC (United States Space Command) facilities around Colorado Springs. The purpose of this task is to provide Command, Control, Communications, Computers and Intelligence (C4I)/Information Technology (IT) electronic systems equipment, infrastructure, engineering, design, installation, and Supply and Warehouse support to Naval Information Warfare Center Pacific (NIWC Pacific) during design, installation, configuration, and transition to operations of the IT infrastructure for multiple facilities throughout the period of performance. Services required include design, installation, termination, test, and documentation of desktop devices, peripherals, IT cable plant, rack, power distribution units (PDU) and incident to the installation of C4I/IT electronic systems, installation of C4I/IT electronic systems equipment as assigned and in accordance with government installation design plans (IDP), the NIWC Pacific Shore Installation Process Handbook (SIPH) and project sponsor processes and associated logistical support. The work described herein is conducted within existing classified office spaces, IT data centers, IT telecommunications spaces or other spaces designated to house C4I/IT electronics systems equipment and newly constructed secure building. Chickasaw Nation Industries, Inc. serves as a holding company with multiple subsidiaries engaged in several lines of business (Technology, Infrastructure & Engineering, Health, Manufacturing, Public Safety, Consulting, and Transportation) for the federal government and commercial enterprises. A portion of our profits is used to support Chickasaw citizens. We are proud to support the economic development and long-term viability of the Chickasaw Nation and its people. CNI offers premium benefits eligible on the first day of hire to full time employees; (Medical - Dental - Vision), Company Life Insurance, Short-Term and Long-Term Disability Insurance, 401(K) Immediate Vesting, Professional Development Assistance, Legal Aid Assistance Program, Family Planning / Fertility Assistance, Personal Time Off, and Observance of Federal Holidays. As a federal contractor, CNI is a drug-free workplace and adheres to the Federal Controlled Substance Act. ESSENTIAL REQUIREMENTS * The ability to obtain, maintain and access classified information at the TS/SCI level. * BICSI Technician Certification required * CTS preferred * CTS-D preferred * CTS-I preferred * Operational knowledge of Personal Computer Systems and Microsoft Office Suite * Practical knowledge of construction, service maintenance and operation procedures of IT and AV related systems and equipment. * Practical knowledge of IT and AV installation methods and techniques. * Knowledge of AV equipment assembly and testing. * Technical proficiency and effective problem-solving skills. * Excellent verbal and written communications skills with ability to create and interpret a variety of technical materials. * Excellent customer service and relationship-building skills and ability to effectively interact with others in the performance of assigned duties. * Ability to prepare, read and interpret engineering drawings, schematic diagrams and technical directives. * Ability to execute scheduled tasks with team members. * Willingness and ability to learn new concepts and techniques. * Ability to effectively work both individually and in a team environment. * Ability to travel to client worksites on as needed basis within a 50-mile radius from the home duty station. ESSENTIAL DUTIES AND RESPONSIBILITIES Essential duties and responsibilities include the following. Other duties may be assigned. * The Engineering Technician will provide support for cabling, equipment and C4ISR system installations. * Pulls, terminates and dresses Category 6A and Fiber Optic cabling. Installs and documents IT equipment, cable conveyance, antennas and supporting systems. * Support teammates to help the team meets required technical abilities. * Contributes to all phases of the AV and IT infrastructure installation or upgrade. * Pulls and dresses fiber optic and Category 6A copper cables. * Installs of racks/cabinets/credenzas and all peripheral equipment. * Racks and stacks of equipment in racks/credenzas. * Terminates copper cable up to CAT6A and SM/MM Fiber single strand to MPO/MTP. * Helps to solve issues related to cables and networks with minimal oversite * Tests and documents of all cables. * Installs of Thinklogical, Extron and Creston AV Matrix Routing and Extension Solutions. * Installs per a SIPH standard IDP, adapt/troubleshoot/modify where necessary, and provides * redlines back to an AutoCAD drafter for As-built updates. * Helps team to resolve technical/physical issues often requiring coordination with other disciplines: networking, facilities, HVAC, electrical, security, etc. * Conducts and documents PITCO activities. * Performs with guidance and/or instruction assignments that are not completely standardized or prescribed. * Adapts standard procedures or equipment, using fully applicable precedents per instruction of team leads * Receives initial instructions, equipment requirements, and advice from team lead, supervisor, engineer as needed and is able to implement instruction with minimal oversite. Work is reviewed for technical adequacy or conformity with instructions. * Provides support in the demolition and disposal of current powers system equipment under supervision of electrician maintenance. * Conducts performance tests of IT and AV systems. EDUCATION / EXPERIENCE Associate degree, technical certification and/or a minimum of five (5) years' related experience supporting cabling, equipment and IT Network System Installation. Minimum five (5) years of troubleshooting and repairing systems. Minimum five (5) years' experience in using Microsoft office and other AV software programs; or equivalent combination of education/experience. PHYSICAL DEMANDS Work is primarily performed in a factory, machine shop or construction environment. The ability to verbally communicate alarms or warnings clearly, concisely, loudly and quickly, to clearly and quickly hear or otherwise sense alarms or warnings and take appropriate action. Frequently required to maintain equilibrium to prevent falling when moving, walking, standing, kneeling or crouching - particularly on narrow, uneven, irregular, slippery surfaces, going up or down ladders, stairs, scaffolding, ramps, poles or other objects using hands, arms, feet or legs. Frequently required to bend the body downward and forward, bending leg and spine - working in a bent over position. Frequently required to sense physical attributes such as size, shape, temperature, texture or sharpness of an object by touching. Frequently required to grasp, grip or apply pressure to an object with the fingers and palm, holding an object in the hand. Frequently required to lift, raise or lower objects in a vertical direction, particularly heavy or bulky objects. Moving objects backward, forward, in or out in a horizontal direction, particularly heavy or bulky objects. Pulling, exerting a steady backward, downward, upward or outward force against an object - jerking, plucking, wrenching, stretching, towing, drawing, dragging or tugging objects in a sustained motion. Pushing, pressing against something with steady forward, downward, upward or outward force - shoving, pushing, compressing, squeezing, mashing, packing, pressing, jamming, compacting, or squashing objects in a sustained motion. The ability to see and distinguish colors, to visually distinguish shapes and patterns, to accurately sense distances (depth perception), to accurately see objects and detect motion at wide angles (peripheral vision). Frequently uses the lower extremities and back muscles and moving on foot, particularly for long distances. May have exposure to indoor/outdoor adverse weather conditions. Frequent exposure to noise - workers must wear protective hearing equipment or frequently shout in order to be heard above the ambient noise level. Exposure to pollutants or allergens which can adversely affect the skin and/or the respiratory system such as gases, smoke, odors, mists, fumes, dust, chemicals, oils or solvents. Exposure to hazardous working conditions including moving machinery, electricity and/or working in high places. May be exposed to hot objects, flames or sparks. The job requires the use of protective equipment such as hard hats, respirators, aprons, gloves, special clothing, safety shoes and safety glasses. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of this job. EOE including Disability/Vet The estimated pay range for this role is $30.34 to $44.16 per hour, with the final offer contingent on location, skillset, and experience. CNI offers a comprehensive benefits package that includes: * Medical * Dental * Vision * 401(k) * Family Planning/Fertility Assistance * STD/LTD/Basic Life/AD&D * Legal-Aid Program * Employee Assistance Program (EAP) * Paid Time Off (PTO) - (11) Federal Holidays * Training and Development Opportunities Your application submission will be considered for all potential employment opportunities with Chickasaw Nation Industries (CNI). #INDCNI