Engineering technician jobs in Las Cruces, NM

Job DescriptionDescription: Position Type: Non-Exempt, Part-Time, On-Call Systems Application & Technologies, Inc. (SA-TECH) is a progressive and well-established Department of Defense (DoD) contractor specializing in Range operations and maintenance (O weapons testing; facilities management; aerial, ground and seaborne targets O technical, logistics and other engineering support; systems integration; electronics and communications maintenance services; and a growing cybersecurity business. We are highly focused and, among other efforts, currently operate a dozen active test and/or training ranges for the Army, Air Force and Navy. Our 36-year heritage is founded on supporting complex and diverse DoD programs and we've developed a standout reputation for providing the highest quality services, superior workmanship and cost-effective results while achieving complete customer satisfaction. We are currently looking to hire Engineering Technicians on a part-time, on-call basis at our White Sands Missile Range Base Camp in Orogrande, NM to support our unit rotations schedule. The frequency of the work is 9-10 times a year for about 1500 hours, many of which are overtime hours. Our Surge Technicians work 12 consecutive days during unit rotations and we support approximately 9-10 rotations a year at the Whites Sands Missile Range location. As a surge technician, your duties include (but are not limited to): Providing support of test events on military ranges which requires a knowledge of military protocol and standard operating procedures during FTX events. Applying technical knowledge of electrical, mechanical, and computer skills in support of operations and routine maintenance on EW & Radar systems and their peripheral equipment. Setting up EW & Radar systems at remote locations, operating the systems in support of test missions, and tearing down the systems once testing is completed. Work includes cross-utilization into other positions that fall within their scope of work. Working in a dynamic, fast-paced environment of military test events. The Engineering Technician IV performs assignments that are not completely standardized or prescribed, selects or adapts standard procedures or equipment, using fully applicable precedents, receives initial instructions, equipment requirements, and advice from supervisor or engineer as needed, performs recurring work independently. Work is reviewed for technical adequacy or conformity with instructions. Work Conditions: Conditions will vary as most work will be accomplished outdoors. Must be able to work outside on the range throughout the year where temperatures and weather conditions will vary. Physical requirements include: 45% standing, 25% walking, 20% sitting, 5% reaching, 5% lifting, 10% crouching in tight spaces (inside unit vehicle), and you must be capable of lifting 50-100 pounds independently or with assistance from others. This is a part-time on-call position and shift hours vary with mission requirements. Must be able to work all shifts, weekends, holidays and overtime as needed when called in, sometimes on short notice, to support test missions. Must be able to wear appropriate Personal Protective Equipment (PPE) for work tasks assigned. Due to real-world war-time environments, must be able to handle combat simulation and maneuvering exercises. May be subjected to loud noises including explosive devices, live gun fire/ammunitions firing war-time simulation, and loud noise generated from inside military vehicles during missions, troop support, and while working on range. Requirements: Education/Experience/Skills: High School diploma or equivalent. 10+ years of electrical and mechanical system maintenance and repair experience. 5+ years of maintenance supervisor/maintenance lead/maintenance planning experience. 3+ years of RF maintenance and repair experience. Must have radar operation experience. Must have working knowledge of Network/Computer operations & maintenance. Experience working at a government facility helpful, but not required. Ability to obtain a Forklift Operator license. Proficiency in Microsoft Office Suite to include Excel, Word, Internet Explorer. Ability to input data into various user interface applications, ability to save and transfer data via USB sticks, CDs, hard drives, or other storage devices, and knowledgeable with networking and component configuration set-up and troubleshooting. Must have strong working knowledge and the ability to use hand tools and technician diagnostic equipment to include digital multi meters, power meters, power drills, wrenches, screw drivers, etc. Work experience as a technician in any of the following fields is considered a plus: Mechanic, Electrician, Communication System Repairman, or Hydraulic/Pneumatic System Repairman. Current Driver's License required; must be able to be insured through company's vehicle insurance policy while driving work/government/rental vehicles during working hours, and for the duration of employment. U.S. Citizenship required and you must be able to obtain a U.S. DoD Security Secret Clearance prior to start date and maintain a Secret clearance throughout employment. All candidates will be required to pass background screening to include SSN, Driver Record, and Criminal Background Investigation. Supporting Our Warfighters: As a highly regarded and long-established DoD employer, SA-TECH recognizes that our success is indicative of our team members' hard work and dedication towards a common goal… Supporting our Warfighters. Along with unparalleled stability, we have the ingredients for superior performance with a servant leadership mentality that provides an affirmation of purpose and value in a team-oriented positive work environment. As such, we provide a sense of family, competitive pay and employee benefits, along with a strong commitment to the professional development of our workforce and for providing broad career opportunities throughout the United States. SA-TECH offers: Employee Recognition Above-Average Compensation Competitive Benefits Ongoing Training and Development Career Advancement Opportunities Benefits Offered: Medical, Dental, Vision Life Insurance Long-Term Disability 401(k) match Flexible Spending Accounts EAP Education Assistance PTO and Holidays Vacation and Sick Leave Other Important Information You Should Know: By applying to this posting, you express interest in the position and may be considered for other opportunities within the company that match your skills. SA-TECH offers flexible work schedules depending on the program, alongside generous PTO benefits. We are an Equal Opportunity/Affirmative Action employer and evaluate all applicants regardless of race, color, religion, sex, sexual orientation, gender identity, pregnancy, national origin, disability, or protected Veteran status. We participate in the E-Verify system to verify work authorization in the U.S. Applicants are encouraged to apply within 5-15 days of posting for optimal consideration. We prioritize a supportive work environment, professional development, and a healthy work-life balance and our pay and benefits aim to enhance employee well-being. If this culture resonates with you, we invite you to apply. If you're uncertain about your fit, please explore other roles on SA-TECH Careers. All responses will be handled with strict confidentiality. ** Please note that any provided salary information is a general guideline. SA-TECH considers factors such as (but not limited to) scope and responsibilities of the position, the candidate's work experience, education, training, and skills as well as market and business considerations when extending offers.

Job Description Magrym Consulting Inc. is seeking a qualified Construction Materials Testing (CMT) Technician in Midland, Texas. As a growing company, technicians will have the opportunity to grow with us. Candidates should be willing to work overtime and weekends as required. Duties include: Soil and Aggregate Sampling Logging materials Perform Aggregate, Soil and Concrete Testing Lab and Field work Follow ASTM and AASHTO Standards Software data entry Geotechnical sample logging Maintaining a clean working environment Accurate recording of timesheets Daily travel to and from construction sites, generally within 100 miles from the home office The ability to train to achieve minimum certificates in ACI, NICET, and/or State Testing Certificates within 6 months of hire Ability to work outside in the vicinity of large construction equipment Ability to utilize hand tools such as sledgehammers, shovels and picks Observing and documenting field activities Maintain equipment and lab vehicles In-house equipment verification General Skills: Attention to detail Basic Math, Microsoft Suite skills Excellent communication with internal and external clients General maintenance skills Strong safety focus Physical Requirements: Ability to lift 60+ lbs Stand in one place for 1 to 2 hours at a time Ability to wear appropriate PPE for hazardous materials Wear steel toe shoes as needed Ability to work indoors and outdoors in all weather conditions Ability to reach with hands and arms, climb or balance, and stoop, kneel, crouch or crawl. At times, this position may be working at or on uneven terrain, varying heights, in confined spaces, or supported trenches. Requirements High School Diploma or equivalent Valid Texas Drivers License Clean driving record ACI Field Technician Certification (preferred) ACI Laboratory Technician Certification (preferred) ACI Aggregate Base Testing Technician Certification (preferred) Ability to pass a pre-employment/random drug test Associates or Bachelor degree in Civil Engineering, Architecture or Construction is a plus Benefits Dental insurance Health insurance Life insurance On-the-job training Paid time off Paid Holidays Paid training 401K Retirement plan Vision Insurance Dental Insurance Short Term/Long Term Disability

If you enjoy working on high profile and challenging engineering projects supporting the US Army, Serco has a great opportunity for you! The Engineering Technician will be part of a dynamic team at our Fort Bliss, Texas location. Bring your expertise and collaborative skills to make an impact towards our military defense and safety of our Soldiers. This position is contingent upon your ability to transfer/maintain a Secret clearance. Serco supports the US Army as a prime contractor for their Next Generation Command and Control (NGC2) contract which supports implementing capabilities that enable the service to employ Command Posts (CP) across the operational spectrum. Our team develops, integrates, and maintains modern and mobile solutions for an integrated CP infrastructure. You will be part of a team that works closely with the customer and other Serco functional area teams to deliver quality systems and associated supporting documentation. The team has been recognized by the Army Customer and the industry for their outstanding contributions to the contract and program. In this role, you will: Plan and perform routine and non-routine hardware assembly and integration assignments of substantial variety and complexity that are typically part of broader assignments. Construct components, subunits, or simple models; adapt standard equipment; troubleshoot and correct malfunctions Follow specific layout and scientific diagrams to construct and package simple devices and subunits of equipment Conduct tests or experiments requiring selection and adaptation or modification of a wide variety of critical test equipment and test procedures, prepare and operate equipment, record data, measure and record problems of significant complexity that sometimes require resolution at a higher level, and analyze data and prepare test reports Extract and compile a variety of engineering data from field notes, manuals, lab reports, etc., process data, identify errors or inconsistencies, select methods of data presentation Apply methods outlined by others to limited segments of research and development projects, construct experimental or prototype models to meet engineering requirements; conduct tests or experiments and redesigns as necessary and record and evaluate data and report findings Review or develop designs by extracting and analyzing a variety of engineering data, applying conventional engineering practices to develop, prepare, or recommend schematics, designs, specifications, electrical drawings and parts lists Serve as a prototype systems and network data collector/analyst during the customer's testing and assessments Qualifications To be successful in this role, you must have: Ability to obtain an interim secret clearance with the ability to obtain/maintain a Secret clearance. 3 years of relevant experience An Associate's degree in a specialized professional engineering and/or STEM curriculum (an Associate's Degree in Computer Networking highly preferred) A High School Diploma/GED and 2 additional years of relevant experience will be considered in lieu of education Ability to develop system-of-systems integration plans to include developing modification designs for new equipment installation. Ability to travel up to 25% of the time. Additionally preferred experience and skills: Experience with military vehicles Troubleshooting and correcting network errors/faults during design, fabrication, assembly, configuration, and integration phases Experience with C4ISR If you are interested in supporting and working with our military and a passionate Serco team, then submit your application now for immediate consideration. It only takes a few minutes and could change your career! Company Overview Serco Inc. (Serco) is the Americas division of Serco Group, plc. In North America, Serco's 9,000+ employees strive to make an impact every day across 100+ sites in the areas of Defense, Citizen Services, and Transportation. We help our clients deliver vital services more efficiently while increasing the satisfaction of their end customers. Serco serves every branch of the U.S. military, numerous U.S. Federal civilian agencies, the Intelligence Community, the Canadian government, state, provincial and local governments, and commercial clients. While your place may look a little different depending on your role, we know you will find yours here. Wherever you work and whatever you do, we invite you to discover your place in our world. Serco is a place you can count on and where you can make an impact because every contribution matters. To review Serco benefits please visit: ************************************************************ If you require an accommodation with the application process please email: ******************** or call the HR Service Desk at ************, option 1. Please note, due to EEOC/OFCCP compliance, Serco is unable to accept resumes by email. Candidates may be asked to present proof of identify during the selection process. If requested, this will require presentation of a government-issued I.D. (with photo) with name and address that match the information entered on the application. Serco will not take possession of or retain/store the information provided as proof of identity. For more information on how Serco uses your information, please see our Applicant Privacy Policy and Notice. Serco does not accept unsolicited resumes through or from search firms or staffing agencies without being a contracted approved vendor. All unsolicited resumes will be considered the property of Serco and will not be obligated to pay a placement or contract fee. If you are interested in becoming an approved vendor at Serco, please email *********************. Serco is an equal opportunity employer. We evaluate qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, and other legally protected characteristics.

Job Description Job Title: Engineering Technician Build a Meaningful Career with Impact Are you a detail-oriented, hands-on professional looking for an opportunity to support innovative engineering projects? At Bohannan Huston, we are looking for an experienced Engineering Technician to join our team in our Las Cruces office. If you are passionate about contributing to projects that make a real difference in community development and planning, we encourage you to apply today! Your Role & Responsibilities In this role, you will contribute to: Technical Support - Assist engineers with project setup, design workflows, and plan production to ensure efficient project execution. Drafting & Design - Support engineering teams in the design of civil infrastructure projects, including site development, roadways, water and wastewater utilities. Field Work & Data Collection - Conduct field visits to gather site data and verify completed projects through as-built documentation. Project Documentation - Help prepare construction documents, project reports, and drawings in accordance with specifications and regulatory standards. Design Software Application - Utilize one or more design software platforms (such as AutoCAD or Civil 3D) to assist in creating high-quality, accurate design deliverables. Quality Assurance - Review field data and design outputs to ensure accuracy, consistency, and compliance with industry standards. What We Are Looking For Professional Experience - 2 years minimum experience in civil engineering, surveying, or a related technical field. Academic Excellence -- You have graduated with a high school/equivalent plus a civil technology or survey technology degree, or a related technical field. Technical Proficiency - You are fluent in AutoCAD Civil 3D software on site development grading and drainage plan production, pipeline alignments, and roadway alignments and grading. You have knowledge and capabilities in the use of ArcGIS. Attention to Detail - Strong ability to review technical data, ensure accuracy in designs, and identify potential issues before they impact the project. Strong Communication Skills - Ability to communicate technical concepts effectively, both written and verbally, and work collaboratively with diverse teams. Problem-Solving Mindset - An innovative thinker who can troubleshoot and resolve technical challenges in the field and the office. Commitment to Safety - Experience working in compliance with safety standards and maintaining a safe work environment. Technologies You Will Work With & Learn AutoCAD Civil3D ArcGIS Why Choose Bohannan Huston? At Bohannan Huston, we are dedicated to delivering sustainable engineering solutions and creating an inclusive work environment that promotes personal and professional growth. You will have the opportunity to work on innovative, high-impact projects alongside an experienced and supportive team. Why Las Cruces, New Mexico? Las Cruces provides affordable living, stunning desert landscapes, and a relaxed lifestyle. With a growing community and border region, it is an ideal location to expand your career. What We Offer Professional Development - Access to mentorship, training, and hands-on technical experience. Work-Life Balance - Three weeks of flexible leave plus an additional week off during the winter break to support personal and professional well-being. Comprehensive Benefits - Medical, dental, and vision insurance, plus an HSA with company contributions. Financial Security - A 401(k) retirement plan with a competitive company match. Award-Winning Workplace - Recognized as a Top Workplace and ENR Top 500 Firm since 1998. Take the Next Step in Your Career If you are excited to join a collaborative team, contribute to meaningful engineering projects, and develop your skills in a supportive environment, we encourage you to apply today! Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, pregnancy, genetic information, disability, status as a protected veteran, or any other protected category under applicable federal, state, and local laws. Job Posted by ApplicantPro

Looking for an opportunity to work with a talented team and expand your experience in supporting Weapons Test and Evaluation (T&E) projects? SSI needs to add an Engineer Technician II to support our current list of services provided to the U.S. Navy. These positions, located at the White Sands Missile Range (WSMR) in White Sands, New Mexico, will provide engineering, technical, logistics, and administrative support in the planning, maintenance, preparation, execution, launch operations and post-test phases to the W Department of the Navy Surface Warfare Center, Port Hueneme Division (NSWC PHD). Primary Functions: This is a junior level Engineering Technician position; incumbent with guidance from more senior engineering technicians will: Assemble electrical and electronic systems and prototypes. Assist with installing and maintaining electrical equipment and modify electrical prototypes, parts, and assemblies to correct problems. Assist with building or modifying prototypes from rough sketches or plans Assemble, test, and maintain circuitry or electronic components according to engineering instructions, technical manuals, and knowledge of electronics. Identify and resolve equipment malfunctions, working with manufacturers to resolve issues. Assist with launcher systems in order to maintain program launch capabilities. Assist with design work in areas of installation, maintenance, and repair of electrical, electronic, and mechanical equipment such as complex launch systems to include stationary and mobile launchers. Assist with installation, maintenance, system upgrades, troubleshooting, replacement, and repairs of all facilities, infrastructure, vehicles, new/existing equipment, and tools. If this aligns with your experience and sounds like it is the career path you wish to progress, these are the requirements to be considered for this position: Education/Experience/Skills: High School Diploma or equivalent with an additional two years of related experience. Experience in: Installing, operating, testing, and evaluating various weapon systems, equipment, and components Ability to independently plan and accomplish complete projects or studies of broad scope and complexity, Ability to climb and work at elevated heights of up to eighty feet. Ability to interpret basic electrical schematics and blueprints. Ability to understand basic hydraulic and pneumatic systems. Driver's License Able to deploy to both CONUS and OCONUS CONTINGENT OFFER This position is contingent upon contract award and is anticipated to start in May of 2023. Must possess a valid driver's license. U.S. Citizenship and must be able to obtain and maintain U.S. DoD SECRET Security Clearance required for hire, and to be maintained throughout employment. All candidates will be required to pass background screening to include SSN, Driver Record, and Criminal Background Investigation. What You Can Expect from Us Positive Office environment Professional and knowledgeable team and leadership Business Office hours What's In It for Me? Competitive salary Great benefits, including: Company-subsidized PPO Medical, Dental, and Vision coverage 401(k) Retirement Plan with company match Paid Time Off 10 Paid Holidays per year Education Assistance Company-subsidized Corporate Fitness Program Medical and Dependent Care Flexible Spending Accounts Company-paid Life and Accidental Death and Dismemberment Insurance with an option to increase coverage. Company-paid Short- and Long-term Disability Insurance Company-paid Employee Assistance Program Flexible hours Opportunities for on-the-job training What Your Experience Working for Us Will Be Like Ask any of our employees and they will tell you SSI is a great place to work with an upbeat and positive culture. We take pride in our work to continuously improve on our performance in a manner that enhances the mission of the agencies we serve while expanding opportunities for our employees and our company. About Synectic Solutions, Inc. (SSI) Synectic Solutions, Inc. (SSI), is an award-winning, 20-year government contracting agency focused on the areas of logistics, engineering, management, and information technology. SSI is a growing organization committed to exceeding customer expectations, to continually improving all products, services, and processes, and to perform all work with the commitment to upholding the highest standards and ethics. Ready to apply? If this job sounds like a fit for you, then click on the ‘apply' button below. Good luck!

Full-time Description Responsible for contribution to Incoming Lens Inspection, Drafting Lens and Mechanical Drawings, Maintenance of Machines, and Production fixtures. Principal Responsibilities Incoming inspection of optical lenses and mechanical products Drafting lens and mechanical drawings as needed Support production in maintenance of machines and re-build of components Support the building of production fixtures Perform miscellaneous duties and projects as assigned and required. Requirements 3 years' experience in a production/quality control environment Strong mechanical and general software aptitude. Ability to quickly learn new technologies and tools. Experience interfacing with quality, stockroom, production control, purchasing, and engineering personnel. Solidworks Experience Working knowledge of Microsoft 365 apps suite, basic use of ERP/MRP systems. Education Requirements High School Diploma or GED required. Associate, two-year technical degree, or equivalent level of education preferred. Supervisory Responsibility No supervisory responsibility Working Conditions This job operates in manufacturing and engineering laboratory environments. Physical surroundings This role routinely uses highly specialized inspection equipment, instruments like calipers, microscopes and tools. Operating a lathe might be required on occasion. PPE required when in controlled environment rooms. Physical Effort While performing duties of this job, the employee is regularly required to stand, walk, sit, use hands to finger, handle, or feel objects, tools, or controls; reach with hands and arms; talk and hear, occasional lifting of heavy objects Travel Limited, infrequent travel may be required.

Requirements MOS Code: 12H (Army); 4205 (Navy); 1361 (Marine Corps); 672 (Coast Guard) Education and Experience: Bachelor's Degree or higher in Engineering. Licenses and Certificates: Some positions may require a valid Texas Class "C" Driver's License or equivalent from another state by time of appointment. General Purpose Under general supervision, design, evaluate, review, and coordinate engineering plans, systems, and specifications; and construction, recommend or direct the installation of systems. Typical Duties Develop and design engineering plans, systems and specifications prepared in-house, and review and inspect those prepared by private consultants and contract workers. Involves: Prepare computations, design and draft plans and specifications for engineering projects such as, bridges, streets, mechanical, electrical, or traffic control systems, irrigation or drainage improvement, sewer and water construction/relocation, telecommunication projects, park facilities, buildings, and other capital improvement projects. Utilize computer aided design drafting (CADD) methods, Traffic Management System, or automated management systems specific to area of assignment. Review plans for construction projects. Draft and prepare plans and specifications for the procurement, repair, upgrade or replacement of equipment. Review construction plans to identify design problems and compliance to standards and codes. Determine related issues for possible relocation of existing or proposed water, sewer and utility lines, traffic control signals and signage, streets, roads, irrigation or drainage projects. Make recommendations for changes to plans and specifications. Identify required materials, evaluate costs and prepare estimates. Develop plat profiles and cross-sections from survey notes. Prepare surveys, easement correspondence, and legal descriptions, and calculate metes and bounds. Appraise shortages, excesses, quality and cost of renovating existing facilities. Coordinate projects with utility companies and City departments. Review and interpret street, subdivision, mechanical, electrical, water/wastewater collection and distribution systems or traffic control plans, specifications, proposals and structures prepared by private consultants and contract workers. Supervise and inspect assigned projects under contract. Enforce safety rules and regulations. Inspect workmanship, materials and equipment used in the construction or installation of engineering projects in area of assignment. Assist in administrative duties. Involves: Prepare contract or bid specifications. Assist or prepare draft Requests for Proposals. Review contractor packages for project bid proposals. Research issues, conduct studies and/or surveys, review code, trade, regulation, and engineering manuals in assigned area, compile data, develop spreadsheets to evaluate statistical data and testing/research results. Investigate and respond to citizen, City Official, consultant, contractor, or customer inquiries and complaints. Work with individuals and citizen groups to negotiate or determine most appropriate course of action for resolution. Assist in long and short-range planning for area of assignment. Manage documents, maintain records, review and prepare assigned project reports. May oversee small staff. Involves: Schedule, assign, instruct in, guide and check work. Appraise employee. Provide for training and development. Enforce personnel rules, regulations, and work behavior standards. Counsel, motivate and maintain harmony. Recommend transfers, discipline, or other employee status changes. General Information For complete job specification, clickhere. Note: Applicants are encouraged to apply immediately. This position will close when a preset number of qualified applications have been received. Important Note: The required Supplemental Questions and answers are considered an examination component and will generate a score. Applicants are being tested on a conditional basis pending a review of minimum qualifications. Applications will be reviewed for applicants who pass the Supplemental Questions exam. Per CSC Rules & Regulations, after review of the minimum qualifications for applicants that pass the Supplemental Questions exam, a passing score, combined with applicable seniority points and veteran points, will be used to create a list of candidates. Note: This is a new advertisement for Engineering Associate. You must apply if you are still interested in this position Note: Applicants with foreign diplomas, transcripts and degrees must have all documents translated and evaluated by an agency of the National Association of Credential Evaluation Services (NACES) prior to submitting them to the Human Resources Department. Please visit************************ more information. A résumé and/or other documents will not be accepted in lieu of a completed application. Comments such as "See résumé" are not acceptable and will result in the application being considered incomplete. To qualify for this position, the required education, experience, knowledge, and skills must be clearly stated on your application's employment history. We do not use any information on your resume to review if you meet the minimum qualifications for this position. Failure to fully detail all experience and job duties in the application, or copying/pasting directly from the job specification, or responses referring to your résumé will eliminate you from consideration for the position.

Automation Technician (THAAD Product Support) Overview: The THAAD Automation Technician will sustain and maintain multi-functional/multi-user information processing systems and peripheral equipment and auxiliary devices at the unit level. Responsibilities: Installs, operates, and performs unit maintenance on multi-functional/multi-user information processing systems and peripheral equipment and auxiliary devices. Performs input/output data control and bulk data storage operations. Transfers data between information processing equipment and systems. Troubleshoots automation equipment and systems to the degree required for isolation of malfunctions to specific hardware or software. Restores equipment to operation by replacement of line replaceable unit; installs, operates, performs strapping, restrapping, Preventative Maintenance Checks and Services, and unit level maintenance on COMSEC devices. Assists in the design, preparation, editing, and testing of computer programs; configures information processing equipment into required operating configurations. Performs senior operator and systems administrator duties and unit level maintenance functions on assigned computer systems. Compiles production report data and quality control information. Assists less experienced soldiers in the installation, operation and maintenance of information processing equipment. Troubleshoots software using established debugging procedures. Supervises the deployment, installation, operation, and unit level maintenance of multi-functional/multi-user information processing systems. Other duties as assigned. Supports extended hours and an extended work week as required in conjunction with system readiness, training events, and test events, as required. Supports scheduled and expeditionary deployments and rotations with a minimum of 120 hours' notice. Will deploy as Contractors Authorized to Accompany the Force IAW DoDI 3020.41 and AR 715-9. These deployments and rotations may include transportation via Military Air, Military Charter, CONUS Replacement Center, or Commercial means. Living conditions may be limited to military or commercial tents, cots or bunk beds, and potentially inconsistent power/heating/air-conditioning. Will be required to work shifts to support 24/7 operations as required by the unit's mission. Rations will either be provided by U.S. of Host Nation personnel or employee may be otherwise compensated. Minimum Qualifications: Active Secret Clearance. Must demonstrate compliance with Army Regulations for Deployment to all Areas of Responsibility prior to start - to include the standards outlined in USCENTCOM Individual Protection and Individual Unit Deployment Policy, MOD-18. Ability to obtain and maintain Commercial Driver's License. Valid Passport. Possession of/or ability to obtain and maintain either a CompTIA Security+ and A+ certification within 120 days of hire. Willing to travel or deploy as called to any location with little to no prior notice. Preferred Qualifications: Current Commercial Driver's License. Previous deployment experience. Previous experience with THAAD or similar air defense system. PMCS experience. Experience driving forklift. Previous experience with COMSEC devices. Possession of a current CompTIA Security+ and A+ certification. Why work at ITC Defense: Employer Supplemented Health Insurance Employer Paid Dental and Vision Insurance Employer Paid Life and AD&D Insurance 3% Biweekly 401(k) Contribution Paid Time Off Tuition and Certification Reimbursement Competitive Salaries with Performance Incentives A positive working environment with supportive teammates and leadership ITC Defense Corp. is committed to creating a diverse environment and is proud to be an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or protected veteran status. U.S. Citizenship is required for most positions. This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee. Duties, responsibilities and activities may change, or new ones may be assigned at any time with or without notice. Employment with ITC is at-will. For further information on our equal opportunity protections as part of the employment process, please see **************************************************************** and *********************************************************************************************** ACCESSIBILITY- Candidates must be able to perform the essential functions of the position satisfactorily and that, if requested, reasonable accommodation may be made to enable employees with disabilities to perform the essential functions of their job, absent undue hardship. If you are a qualified individual with a disability or a disabled veteran, you have the right to request a reasonable accommodation for purposes of participating in the application/selection process with ITC. Please refer to our website ************************** for further information on all our EEO/VEVRAA policies. Thank you for your interest in ITC Defense

Arcadis is the world's leading company delivering sustainable design, engineering, and consultancy solutions for natural and built assets. We are more than 36,000 people, in over 70 countries, dedicated to improving quality of life. Everyone has an important role to play. With the power of many curious minds, together we can solve the world's most complex challenges and deliver more impact together. Role description: We are currently seeking an engineering intern to join our Water Business Line in our El Paso office! We work to protect our natural environment and water resources, while powering our world for future generations. Around the world, we're feeling the effects climate change, rapid urbanization, loss of biodiversity. The rate at which we're seeing large-scale, unforeseen events such as floods and wildfires, is becoming more frequent. We are here to protect our natural environment and water resources, while powering our world for future generations. Role accountabilities: In this role responsibilities include evaluating, planning, and designing projects for water, wastewater, and stormwater treatment and conveyance which encompasses pipelines and pumping facilities. You will also be responsible for assessing, developing, and supporting the management of sustainability and resilience projects including conducting vulnerability and mitigation assessments, as well as planning and designing utilities, municipalities, and cities. Additionally, you will perform essential fieldwork activities such as conducting field site visits, collecting samples, performing water quality analyses, evaluating technologies, and gathering plant operations information. You will also be involved in troubleshooting processes and optimizing operations. Support for asset management projects by conducting data analytics, operational and organizational assessments, condition assessments, and overall performance evaluations of water, wastewater, and stormwater facilities will also be key components of your position. In addition to the responsibilities mentioned, you will also: Support preparation of reports, presentations, and other audio-visual materials, and participate in client meetings. Ensure project compliance with all Arcadis practices and quality, health and safety standards, and facilitate coordination for timely completion and submission of projects on time and budget. Work independently and as part of a team, with the flexibility to accommodate collaboration with team members across the U.S. and internationally. Learn and use digital tools to enhance customer experience, team and client collaboration, and project delivery including configuration and deployment of SharePoint, Building Information Modeling (BIM), Power BI, and Augmented Reality. Qualifications & Experience: Required Qualifications: Pursuing a BS in Civil, Environmental, or Water Resources Engineering, or another closely related academic discipline. Knowledge of engineering concepts, theories, and practices related to water/wastewater/stormwater. Proficient in Microsoft Office Excel, Word, and PowerPoint. Preferred Qualifications: Prior internship or coursework in water/wastewater, water resources, or related sectors. EIT certification. Why Arcadis? We can only achieve our goals when everyone is empowered to be their best. We believe everyone's contribution matters. It's why we are pioneering a skills-based approach, where you can harness your unique experience and expertise to carve your career path and maximize the impact we can make together. You'll do meaningful work, and no matter what role, you'll be helping to deliver sustainable solutions for a more prosperous planet. Make your mark, on your career, your colleagues, your clients, your life and the world around you. Together, we can create a lasting legacy. Join Arcadis. Create a Legacy. Our Commitment to Equality, Diversity, Inclusion & Belonging We want you to be able to bring your best self to work every day which is why we take equality and inclusion seriously and hold ourselves to account for our actions. Our ambition is to be an employer of choice and provide a great place to work for all our people. We are an equal opportunity and affirmative action employer. Women, minorities, people with disabilities and veterans are strongly encouraged to apply. We are dedicated to a policy of non-discrimination in employment on any basis including race, creed, color, religion, national origin, sex, age, disability, marital status, sexual orientation, gender identity, citizenship status, disability, veteran status, or any other basis prohibited by law. Arcadis offers benefits for full time and part time positions. These benefits include medical, dental, and vision, EAP, 401K, STD, LTD, AD&D, life insurance, paid parental leave, reward & recognition program and optional benefits including wellbeing benefits, adoption assistance and tuition reimbursement. We offer nine paid holidays and 15 days PTO that accrue per year. The salary range for this position is $17.00 - $31.00 / hour. Actual salaries will vary and are based on several factors, such as experience, education, budget, internal equity, project and location. #LI-RG2 #Resilience-NA

Join GFT, an award-winning architecture, engineering, and construction firm, as a Roadway Engineering Intern and gain real-world experience in a dynamic environment. Our inclusive environment will fuel your innovation and imagination while fostering a sense of belonging. Working on the roadway team at GFT offers the opportunity to engage in transformative projects that enhance transportation infrastructure and improve community connectivity. Whether working on highways and bridges or traffic engineering, our team excels in resilient, sustainable design and construction, delivering innovative solutions that address the complexities of modern, multimodal roadway systems and ensure safe, efficient, and reliable travel for all . Explore some of our signature roadway projects here. What you'll be challenged to do: During your internship, you will work on a highly functioning team and aid in providing design services for a wide variety of projects. You'll receive guidance, supervision and mentorship by experienced engineers and professionals with your success as the goal. The majority of our interns convert to full-time employees. In this capacity, the successful candidate will be responsible for the following: Support real client projects by creating engineering and construction drawings using MicroStation or AutoCAD. Assist in fundamental engineering tasks such as conducting basic engineering calculations and inputting data into analysis software. Participate in field assignments, including inspections of roadways and highways to support project needs. Contribute to various project phases by reviewing drawings, proofreading reports, and performing related engineering support tasks. What you'll bring to our firm: Currently enrolled in an ABET-accredited undergraduate or graduate degree program in Civil Engineering or a related field. Demonstrated interest or prior internship experience in Roadway and Highway Engineering, including design, inspection, and construction. Basic proficiency in CAD, spreadsheets, interpreting design drawings, and technical writing is required. Self-motivated team player with excellent verbal and written communication skills. Willingness to learn from and communicate with our experienced employees. Problem solving abilities and critical thinking skills. What we prefer you bring: Working proficiency in CAD software, such as AutoCAD or MicroStation. Experience using engineering analysis and design software, such as Civil 3D and HEC-RAS. Compensation:The salary range for this role is $20.00 - $28.00 per hour. Salary is dependent upon experience and geographic location. Featured Benefits: • Hybrid (in-person and remote) work environment.• Comprehensive benefits package including wellness programs, parental leave, and pet insurance, in addition to medical, dental, vision, disability, and life insurance.• Tax-deferred 401(k) savings plan.• Competitive paid-time-off (PTO) accrual.• Tuition reimbursement for continued education.• Commitment to professional development, access to internal and external training programs, and support of active participation in professional organizations• Incentive compensation for eligible positions. At GFT, a privately held AEC firm, we innovate where transportation, water, power, and buildings converge. We call this the Infrastructure of Life. We measure our success by the strength of our relationships - that's why we're the employer of choice for 5,000+ of the industry's brightest engineers, planners, architects, inspectors, designers, and more. Our clients choose us for our expertise and prefer us for our nimble approach, creativity, and personal touch. Backed by over a century's experience, together we're building a lasting legacy for future generations: stronger communities, a healthier planet, and better lives. GFT: Ingenuity That Shapes Lives™ is an Equal Opportunity Employer. All qualified candidates will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veterans' status or other characteristics protected by law. Unsolicited resumes from third party agencies will be considered the property GFT. Sponsorship is not being offered for this position. Location: El Paso, TX Core Business Hours: 8:00 AM - 5:00 PM Employment Status: Hourly Salary Range: $20.00 - $28.00 per hour Salary dependent upon experience and geographic location GFT does require the successful completion of a criminal background check for all advertised positions. "California Applicants" Applicants in the County of Los Angeles - Qualified applications with arrest or conviction records will be considered for employment in accordance with the Los Angeles County Fair Chance Ordinance for Employers and the California Fair Chance Act. Applicants in the City of San Francisco - Pursuant to the San Francisco Fair Chance Ordinance, we will consider for employment qualified applicants with arrest and conviction records. Applicants in the State of California - Qualified applications with arrest or conviction records will be considered for employment in accordance with the California Fair Chance Act. #LI-Hybrid #LI-ML2

Global Channel Management is a technology company that specializes in various types of recruiting and staff augmentation. Our account managers and recruiters have over a decade of experience in various verticals. GCM understands the challenges companies face when it comes to the skills and experience needed to fill the void of the day to day function. Organizations need to reduce training and labor costs but at same requiring the best "talent " for the job. Qualifications Ability to learn quickly and take direction. - Good knowledge working with Windows XP, Windows 7, (Required). - Effective communication both orally and written (English). - Self ?motivated, analytical and practical for Industry application problem solving. - Demonstrate adaptability to participate in different project stages. able to look for problems in complicated electrical grids, isolate the issue and solve it. able to look at electrical blueprints and scan them for issues, making sure that they work before installed. specialized measuring and diagnostic devices to evaluate how electrical equipment is working, building or calibrating instrumentation, build electronic devices based on reading schematics, inspect for problems Additional Information $16hr 12 months

Job Details Entry Azar - El Paso, TX Internship DayDescription Summary of Job The Engineering Intern will assist in continuous improvement initiatives with a primary focus on optimizing Standard Operating Procedures (SOPs) and training materials. This role serves as a transitional phase from project engineering to training, ensuring that SOPs, knowledge, and training materials are created and updated in a timely manner. The intern will work closely with project engineers and the training department to document processes and develop effective training programs. Essential Functions and Responsibilities Assist in the development and optimization of SOPs and training materials. Collaborate with project engineers to document processes and procedures. Ensure training materials are up-to-date and reflect current best practices. Work with the Continuous Improvement Manager to identify areas for process improvement. Support the creation and implementation of training programs for new and existing employees. Maintain training records and ensure they are audit ready. Participate in continuous improvement projects and initiatives. Provide support in the development of new technologies and tools for training. Conduct assessments to evaluate the effectiveness of training programs. Assist in the coordination and scheduling of training sessions. Other duties as assigned. Education and Qualifications Currently pursuing a Bachelor's degree in Engineering or a related field. Basic knowledge of process improvement methodologies (e.g., Lean, Six Sigma) is a plus. Proficient in Microsoft Office Suite (Excel, Word, PowerPoint, Outlook). Strong organizational and communication skills. Ability to work collaboratively in a team environment. Eager to learn and apply new concepts. Physical Requirements Flexibility to work hours outside normal business hours. Core Competencies Technical Skills Basic understanding of engineering principles and process improvement techniques. Skills Communication: Excellent interpersonal and professional communication skills, both oral and written. Organization: Strong organizational skills with the ability to manage multiple tasks and priorities. Adaptability: Ability to adapt to changing priorities and work effectively in a fast-paced environment. Problem-Solving: Strong analytical and problem-solving skills. Teamwork: Ability to work effectively as part of a team.

As a Bartlett & West intern you'll work in a stimulating and collaborative environment where you'll gain practical experience and exposure to diverse perspectives. You will also be introduced to the Purpose & Core Values that drive the employee owners each day along with the opportunity to understand the benefits of an employee-owned firm. Interns will be encouraged to network with other employee owners and to build relationships across disciplines as well as with other interns and co-ops. We will provide organized social and networking opportunities throughout the summer where you will have the opportunity to connect with other graduates that have recently joined Bartlett & West as well as meet with our senior leadership team. This position would focus in transportation. Responsibilities As an Engineer Intern you may have the opportunity to work in the following areas: Transportation Environmental (water/wastewater) Structural Civil Site Design Rail Surveying Construction Administration and Observation Landscape Architecture Project experiences may include: On-the-job training for a variety of engineering activities Operating in a learning capacity, gaining knowledge of general processes and procedures Basic drafting skills and techniques. Working with engineer or higher level technician in full plan development. Performing a variety of routine tasks that provide experience and familiarity with engineering staff, methods, practices and programs. Learning on the job about miscellaneous survey activities and the operation GPS and conventional survey equipment. Operating in a learning capacity, gaining knowledge of general construction observation processes and procedures and field tests, such as materials testing, through on-the-job training. Exposure working with a wide range of internal staff such as Landscape Architects, Engineers, Field Surveyors and Design Technicians to external staff such as architects, contractors, utility/facility personnel and/or public clients. Work on a full range of assignments in various project phases. In-office planning and design work and out of office field investigations and site visits. Compile data and perform other basic engineering design calculations. Qualifications Knowledge, Skills, Abilities: Demonstrated leadership, collaboration, communication and decision-making skills Strong motivation toward accomplishing a common goal Effective communication skills Exhibits initiative, responsibility, flexibility and leadership Team oriented and ability to get along with others Ability and aptitude to interpret and understand plans and specifications Effective communication skills Good math skills (ability to: add, subtract, multiply, divide) Knowledge in MS Office Suite and technical software Ability to pass safety classes and exhibit safety oriented mentality Strong organizational skills Knowledge and/or experience in survey software/CAD software and Trimble Business Center Ability to embrace new technologies and processes Basic knowledge of general engineering design practices or guidelines Education: Enrollment in a Technical School or currently enrolled student majoring in an engineering discipline and (1) one year completed in a Bachelor's Degree program. Civil engineering majors preferred. Experience: 0-6 months experience. Experience in MS Office Suite required. Experience or exposure with Computer Aided Design (CAD) and/or Civil 3D software preferred. Travel Expectations: Must be able to travel in-state and out-of-state on occasion, which usually would consist of field work on construction projects, visiting other company locations, attending business meetings. Engineer Intern travels in company vehicle or personal vehicle. Minimum travel is 10% of the time depending on projects. Valid driver's license with good driving record required. This job description is not designed to cover or contain a listing of all functions and responsibilities that are required of this position. Employee owners are expected to take on additional responsibilities as requested. Bartlett & West partners with businesses and communities to build smarter, stronger, more connected infrastructure. From railroad GIS to industrial parks and city planning, we provide innovative technology and engineering solutions to clients worldwide. With deep industry knowledge and a passion for creative problem solving, we engineer better tomorrows. Bartlett & West is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, age, sexual orientation, status as a protected veteran or status as a qualified individual with disability.

Semper Valens Solutions is looking for a Telecommunications/Electronics Technician to organize and lead telecommunications installations on the Customer site. The Telecommunications/Electronics Technician will perform site surveys and document current site telecommunications configuration and user requirements. The Technician will design and optimize telecommunications topologies, direct and lead development of engineering installation packages and project drawings, and develop equipment and system test plans. The Technician will be responsible for the development of the on-site installation schedules, mobilization of the telecommunications installation team, and will direct and lead documentation of the configuration changes at each site. Responsibilities: Perform surveys and assessments in accordance with the requirements for survey and design of LAN/WLAN upgrades identified in the latest design plan. Perform pre-survey tasks to include: Participate in the Same Page pre-deployment for Survey and Pre-Deployment Site Survey meetings. Ensure personnel have the appropriate hard and soft copy drawings and programs to view, print and modify the drawings as needed. Review all site-specific documentation including the historic site documentation. Submit a Daily Site Survey Report to accurately reflect survey activities. Complete an Outbuildings Connectivity (OBC) Spider Diagram Drawing. Survey the WLAN devices, infrastructure and radio frequency (RF) signatures. Includes using AirMagnet Survey Pro and predictive heat mapping. Heat map the location and use the information for the preliminary prediction of AM placements for all locations requiring new WLAN AM placements Perform fiber/copper cable testing during the survey. Utilize fiber cleaning pens on the fiber before testing and report fiber and copper cable test results. Ensure clear and readable pictures in accordance with the Digital Picture. Collect, verify, and organize all network configurations for both LAN and WLAN. Physically inspect each proposed cable pathway for any new proposed LAN Work Area Outlet (WAO) or AP/AM outlets. The Technician shall document the type of penetration required and the composition and fire-rating of the physical wall/ceiling/floor to be penetrated. Survey and inspect all CMR/SEA communications rooms and associated infrastructure for proper grounding and bonding in accordance with the latest version of the DHA TR&G. Ensure all CMR/SEA cabinets, equipment racks, ladder rack, cable trays/baskets, and/or backbone conduits are properly bonded to the Primary Bonding Busbar (PBB) or Secondary Bonding Busbar (SBB). Survey all power receptacle types, plug types, power distribution units (PDUs) and UPS systems supporting LAN/WLAN equipment. UPS make/model, size, age, current power load (percentage), serviceability, network monitoring capability, bonding/grounding and battery capacities shall be captured during the survey process. Complete survey close-out activities after all survey activities and prior to the scheduled onsite out brief. Will require remaining onsite until Customer acceptance of close-out activities. Education/Experience: Must have 2 years of telecommunications /electronics vocational training or professional certification from an ABET accredited technical school or equivalent military school and 5 years' experience in two or more of the specialties identified. A substitution for training may be applied with 10 years of experience in two or more of these specialties. Familiarity with the following technologies is required: Cisco, Juniper, or Ruckus, switches, wireless LAN controllers, and wireless access points/air monitors connected with CAT 5e/6 copper or single/multimode fiber. Additional equipment includes PDUs and UPS's. IT/ADP Level I or IT/ADP Level II. Proficient at trouble-shooting problems with telecommunications equipment to include system interfaces and power/ground issues. Experience in troubleshooting and activating circuits and preparing test reports. Proficient in using common test equipment (e.g. digital and Ethernet test sets, oscilloscopes, spectrum analyzers, power meters/analyzers). Proficient in testing communications and power equipment/systems and following standard test procedures. Experience performing surveys and assessments in accordance with requirement for LAN/WLAN design upgrades. Experience performing pre-survey tasks. Willing to travel in performance of required work responsibilities. Clearance: DoD Secret Clearance required based on Tier III investigation. About Semper Valens Solutions: Semper Valens Solutions, Inc. (SVS) is a Service-Disabled Veteran Owned Small Business (SDVOSB) providing Cost Effective Software and Systems Engineering, Field Support, Training and Full Life cycle Support Management to the DOD and VA community. At Semper Valens, our vision is to remain a creative, cutting edge and cost-effective solutions provider where our shared intellect, industry experience, and technology excellence, make a positive difference in our customer's success. Our solutions help bridge the gap between IT and business prioritizations to optimize budgets, risks, and operational processes. We search for outstanding technical professionals, hiring at all levels of the experience spectrum; intermediate, journeyman and senior. Consider us for your career plan. Semper Valens Solutions is an Equal Opportunity Employer Semper Valens Solutions proactively fulfills its role as an equal opportunity employer. We do not discriminate against any employee or applicant for employment because of race, color, sex, religion, age, sexual orientation, gender identity and expression, national origin, marital/parental status, pregnancy/childbirth, or related conditions, physical or mental disability, genetic information, status as a Disabled Veteran, Recently Separated Veteran, Active-Duty Wartime or Campaign Badge Veteran, Armed Forces Services Medal, or any other characteristic protected by law. If you require a reasonable accommodation to apply for a position with Semper Valens Solutions through its online applicant system, please contact Semper Valens Solutions Human Resources Department at **************.Semper Valens Solutions is an affirmative action/equal opportunity employer - minorities, females, disabled, and protected veterans are urged to apply. Applicants have rights under Federal Employment Laws. All Jobs at Semper Valens Solutions: ********************************

If you enjoy working on high profile and challenging engineering projects supporting the US Army, Serco has a great opportunity for you! The Engineering Technician will be part of a dynamic team at our Fort Bliss, Texas location. Bring your expertise and collaborative skills to make an impact towards our military defense and safety of our Soldiers. This position is contingent upon your ability to transfer/maintain a Secret clearance. Serco supports the US Army as a prime contractor for their Next Generation Command and Control (NGC2) contract which supports implementing capabilities that enable the service to employ Command Posts (CP) across the operational spectrum. Our team develops, integrates, and maintains modern and mobile solutions for an integrated CP infrastructure. You will be part of a team that works closely with the customer and other Serco functional area teams to deliver quality systems and associated supporting documentation. The team has been recognized by the Army Customer and the industry for their outstanding contributions to the contract and program. In this role, you will: Plan and perform routine and non-routine hardware assembly and integration assignments of substantial variety and complexity that are typically part of broader assignments. Construct components, subunits, or simple models; adapt standard equipment; troubleshoot and correct malfunctions Follow specific layout and scientific diagrams to construct and package simple devices and subunits of equipment Conduct tests or experiments requiring selection and adaptation or modification of a wide variety of critical test equipment and test procedures, prepare and operate equipment, record data, measure and record problems of significant complexity that sometimes require resolution at a higher level, and analyze data and prepare test reports Extract and compile a variety of engineering data from field notes, manuals, lab reports, etc., process data, identify errors or inconsistencies, select methods of data presentation Apply methods outlined by others to limited segments of research and development projects, construct experimental or prototype models to meet engineering requirements; conduct tests or experiments and redesigns as necessary and record and evaluate data and report findings Review or develop designs by extracting and analyzing a variety of engineering data, applying conventional engineering practices to develop, prepare, or recommend schematics, designs, specifications, electrical drawings and parts lists Serve as a prototype systems and network data collector/analyst during the customer's testing and assessments Get to know your recruiter: Qualifications To be successful in this role, you must have: A Current DOD Secret clearance 3 years of relevant experience An Associate's degree in a specialized professional engineering and/or STEM curriculum (an Associate's Degree in Computer Networking highly preferred) A High School Diploma/GED and 2 additional years of relevant experience will be considered in lieu of education Experience with the integration of Army Tactical C4ISR systems and vehicle platforms Ability to develop system-of-systems integration plans to include developing modification designs for new equipment installation. Ability to travel up to 25% of the time. Additionally preferred experience and skills: Experience with military vehicles Troubleshooting and correcting network errors/faults during design, fabrication, assembly, configuration, and integration phases Experience with C4ISR If you are interested in supporting and working with our military and a passionate Serco team, then submit your application now for immediate consideration. It only takes a few minutes and could change your career! In compliance with state and local laws regarding pay transparency, the hourly range for this role is $5.00 to $96.15; however, Serco considers several factors when extending an offer, including but not limited to, the role and associated responsibilities, a candidate's work experience, education/training, and key skills. Company Overview Serco Inc. (Serco) is the Americas division of Serco Group, plc. In North America, Serco's 9,000+ employees strive to make an impact every day across 100+ sites in the areas of Defense, Citizen Services, and Transportation. We help our clients deliver vital services more efficiently while increasing the satisfaction of their end customers. Serco serves every branch of the U.S. military, numerous U.S. Federal civilian agencies, the Intelligence Community, the Canadian government, state, provincial and local governments, and commercial clients. While your place may look a little different depending on your role, we know you will find yours here. Wherever you work and whatever you do, we invite you to discover your place in our world. Serco is a place you can count on and where you can make an impact because every contribution matters. To review Serco benefits please visit: ************************************************************ If you require an accommodation with the application process please email: ******************** or call the HR Service Desk at ************, option 1. Please note, due to EEOC/OFCCP compliance, Serco is unable to accept resumes by email. Candidates may be asked to present proof of identify during the selection process. If requested, this will require presentation of a government-issued I.D. (with photo) with name and address that match the information entered on the application. Serco will not take possession of or retain/store the information provided as proof of identity. For more information on how Serco uses your information, please see our Applicant Privacy Policy and Notice. Serco does not accept unsolicited resumes through or from search firms or staffing agencies without being a contracted approved vendor. All unsolicited resumes will be considered the property of Serco and will not be obligated to pay a placement or contract fee. If you are interested in becoming an approved vendor at Serco, please email *********************. Serco is an equal opportunity employer. We evaluate qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, and other legally protected characteristics.

Looking for an opportunity to work with a talented team and expand your experience in supporting Weapons Test and Evaluation (T&E) projects? SSI needs to add an Engineer Technician VI to support our current list of services provided to the U.S. Navy. These positions, located at the White Sands Missile Range (WSMR) in White Sands, New Mexico, will provide engineering, technical, logistics, and administrative support in the planning, maintenance, preparation, execution, launch operations and post-test phases to the W Department of the Navy Surface Warfare Center, Port Hueneme Division (NSWC PHD). Primary Functions: Develop, execute and assist with design work in areas of installation, maintenance, and repair of electrical, electronic, and mechanical equipment such as complex launch systems to include stationary and mobile launchers. Develop specialized design and weight test procedures in support of various launch systems and ordnance handling ground support equipment with wide knowledge and a high degree of proficiency. Design, implement and assist engineers in the modifications of various target designs, missile and rocket control systems, missile and rocket launchers, develop and execute precise hydraulic, static and electronic test equipment. Generate drawings to include various industry and Navy design factors. Guides troubleshooting of electronic, electrical, & mechanical systems that do require considerable judgment and final diagnostic. Identify solutions to technical design problems that arise during design, fabrication, and checkout of electrical systems Inspect designs for quality control, report findings, and make recommendations Draw diagrams and write specifications to clarify design details of experimental electronics units Build or modify prototypes from rough sketches or plans Redline technical data package (manuals, procedures, drawings...) to reflect changes in design or implementation. Perform highly skilled technical work in areas of installation, maintenance, and repair of mechanical equipment with a wide knowledge and high degree of proficiency. Operate various industrial lifting equipment, man-lifts, overhead cranes, hoists, and forklifts in a safe and efficient manner. Use troubleshooting aids such as oscilloscopes and digital VOM's to accurately interpret readings. If this aligns with your experience and sounds like it is the career path you wish to progress, these are the requirements to be considered for this position: Education/Experience/Skills: An Associates level degree or an equivalent military/work experience combination in the field of science, engineering or mathematics. For equivalency purposes: Ten (10) years of service with an appropriate military Naval Enlisted Code, Military Occupational Specialty, and preferred grade at departure is desired to be no less than E6. Five (5) years professional experience in electrical/electronics systems. Ability to climb and work at elevated heights of up to eighty feet. Ability to complete necessary training required to pass the Navy Ordnance Board as a safety observer. Proficiency with computers and ability to work with Microsoft Word and Excel. Proficient with AutoCAD and Solid Works. Driver's License Knowledge of WSMR operations Able to deploy to both CONUS and OCONUS Minimum of one year of previous experience operating and maintaining industrial lifting equipment, forklifts, man-lifts, cranes, and hoists. The following qualifications are desired: Familiarity with the implementation of Navy Fire Control Systems and Navy Vertical Launching Systems. Skill in launching systems, ordnance operations, and knowledge in installing and maintaining ship and land-based systems used in a test and evaluation environment. CONTINGENT OFFER This position is contingent upon contract award and is anticipated to start in May of 2023. Must possess a valid driver's license. U.S. Citizenship and must be able to obtain and maintain U.S. DoD SECRET Security Clearance required for hire, and to be maintained throughout employment. All candidates will be required to pass background screening to include SSN, Driver Record, and Criminal Background Investigation. What You Can Expect from Us Positive Office environment Professional and knowledgeable team and leadership Business Office hours What's In It for Me? Competitive salary Great benefits, including: Company-subsidized PPO Medical, Dental, and Vision coverage 401(k) Retirement Plan with company match Paid Time Off 10 Paid Holidays per year Education Assistance Company-subsidized Corporate Fitness Program Medical and Dependent Care Flexible Spending Accounts Company-paid Life and Accidental Death and Dismemberment Insurance with an option to increase coverage. Company-paid Short- and Long-term Disability Insurance Company-paid Employee Assistance Program Flexible hours Opportunities for on-the-job training What Your Experience Working for Us Will Be Like Ask any of our employees and they will tell you SSI is a great place to work with an upbeat and positive culture. We take pride in our work to continuously improve on our performance in a manner that enhances the mission of the agencies we serve while expanding opportunities for our employees and our company. About Synectic Solutions, Inc. (SSI) Synectic Solutions, Inc. (SSI), is an award-winning, 20-year government contracting agency focused on the areas of logistics, engineering, management, and information technology. SSI is a growing organization committed to exceeding customer expectations, to continually improving all products, services, and processes, and to perform all work with the commitment to upholding the highest standards and ethics. Ready to apply? If this job sounds like a fit for you, then click on the ‘apply' button below. Good luck!

Job DescriptionDescription: Responsible for contribution to Incoming Lens Inspection, Drafting Lens and Mechanical Drawings, Maintenance of Machines, and Production fixtures. Principal Responsibilities Incoming inspection of optical lenses and mechanical products Drafting lens and mechanical drawings as needed Support production in maintenance of machines and re-build of components Support the building of production fixtures Perform miscellaneous duties and projects as assigned and required. Requirements: 3 years' experience in a production/quality control environment Strong mechanical and general software aptitude. Ability to quickly learn new technologies and tools. Experience interfacing with quality, stockroom, production control, purchasing, and engineering personnel. Solidworks Experience Working knowledge of Microsoft 365 apps suite, basic use of ERP/MRP systems. Education Requirements High School Diploma or GED required. Associate, two-year technical degree, or equivalent level of education preferred. Supervisory Responsibility No supervisory responsibility Working Conditions This job operates in manufacturing and engineering laboratory environments. Physical surroundings This role routinely uses highly specialized inspection equipment, instruments like calipers, microscopes and tools. Operating a lathe might be required on occasion. PPE required when in controlled environment rooms. Physical Effort While performing duties of this job, the employee is regularly required to stand, walk, sit, use hands to finger, handle, or feel objects, tools, or controls; reach with hands and arms; talk and hear, occasional lifting of heavy objects Travel Limited, infrequent travel may be required.

Position Type: Non-Exempt, Part-Time, On-Call Systems Application & Technologies, Inc. (SA-TECH) is a progressive and well-established Department of Defense (DoD) contractor specializing in Range operations and maintenance (O&M); weapons testing; facilities management; aerial, ground and seaborne targets O&M; technical, logistics and other engineering support; systems integration; electronics and communications maintenance services; and a growing cybersecurity business. We are highly focused and, among other efforts, currently operate a dozen active test and/or training ranges for the Army, Air Force and Navy. Our 36-year heritage is founded on supporting complex and diverse DoD programs and we've developed a standout reputation for providing the highest quality services, superior workmanship and cost-effective results while achieving complete customer satisfaction. We are currently looking to hire Engineering Technicians on a part-time, on-call basis at our White Sands Missile Range Base Camp in Orogrande, NM to support our unit rotations schedule. The frequency of the work is 9-10 times a year for about 1500 hours, many of which are overtime hours. Our Surge Technicians work 12 consecutive days during unit rotations and we support approximately 9-10 rotations a year at the Whites Sands Missile Range location. As a surge technician, your duties include (but are not limited to): Providing support of test events on military ranges which requires a knowledge of military protocol and standard operating procedures during FTX events. Applying technical knowledge of electrical, mechanical, and computer skills in support of operations and routine maintenance on EW & Radar systems and their peripheral equipment. Setting up EW & Radar systems at remote locations, operating the systems in support of test missions, and tearing down the systems once testing is completed. Work includes cross-utilization into other positions that fall within their scope of work. Working in a dynamic, fast-paced environment of military test events. The Engineering Technician IV performs assignments that are not completely standardized or prescribed, selects or adapts standard procedures or equipment, using fully applicable precedents, receives initial instructions, equipment requirements, and advice from supervisor or engineer as needed, performs recurring work independently. Work is reviewed for technical adequacy or conformity with instructions. Work Conditions: Conditions will vary as most work will be accomplished outdoors. Must be able to work outside on the range throughout the year where temperatures and weather conditions will vary. Physical requirements include: 45% standing, 25% walking, 20% sitting, 5% reaching, 5% lifting, 10% crouching in tight spaces (inside unit vehicle), and you must be capable of lifting 50-100 pounds independently or with assistance from others. This is a part-time on-call position and shift hours vary with mission requirements. Must be able to work all shifts, weekends, holidays and overtime as needed when called in, sometimes on short notice, to support test missions. Must be able to wear appropriate Personal Protective Equipment (PPE) for work tasks assigned. Due to real-world war-time environments, must be able to handle combat simulation and maneuvering exercises. May be subjected to loud noises including explosive devices, live gun fire/ammunitions firing war-time simulation, and loud noise generated from inside military vehicles during missions, troop support, and while working on range. Requirements Education/Experience/Skills: High School diploma or equivalent. 10+ years of electrical and mechanical system maintenance and repair experience. 5+ years of maintenance supervisor/maintenance lead/maintenance planning experience. 3+ years of RF maintenance and repair experience. Must have radar operation experience. Must have working knowledge of Network/Computer operations & maintenance. Experience working at a government facility helpful, but not required. Ability to obtain a Forklift Operator license. Proficiency in Microsoft Office Suite to include Excel, Word, Internet Explorer. Ability to input data into various user interface applications, ability to save and transfer data via USB sticks, CDs, hard drives, or other storage devices, and knowledgeable with networking and component configuration set-up and troubleshooting. Must have strong working knowledge and the ability to use hand tools and technician diagnostic equipment to include digital multi meters, power meters, power drills, wrenches, screw drivers, etc. Work experience as a technician in any of the following fields is considered a plus: Mechanic, Electrician, Communication System Repairman, or Hydraulic/Pneumatic System Repairman. Current Driver's License required; must be able to be insured through company's vehicle insurance policy while driving work/government/rental vehicles during working hours, and for the duration of employment. U.S. Citizenship required and you must be able to obtain a U.S. DoD Security Secret Clearance prior to start date and maintain a Secret clearance throughout employment. All candidates will be required to pass background screening to include SSN, Driver Record, and Criminal Background Investigation. Supporting Our Warfighters: As a highly regarded and long-established DoD employer, SA-TECH recognizes that our success is indicative of our team members' hard work and dedication towards a common goal… Supporting our Warfighters. Along with unparalleled stability, we have the ingredients for superior performance with a servant leadership mentality that provides an affirmation of purpose and value in a team-oriented positive work environment. As such, we provide a sense of family, competitive pay and employee benefits, along with a strong commitment to the professional development of our workforce and for providing broad career opportunities throughout the United States. SA-TECH offers: Employee Recognition Above-Average Compensation Competitive Benefits Ongoing Training and Development Career Advancement Opportunities Benefits Offered: Medical, Dental, Vision Life Insurance Long-Term Disability 401(k) match Flexible Spending Accounts EAP Education Assistance PTO and Holidays Vacation and Sick Leave Other Important Information You Should Know: By applying to this posting, you express interest in the position and may be considered for other opportunities within the company that match your skills. SA-TECH offers flexible work schedules depending on the program, alongside generous PTO benefits. We are an Equal Opportunity/Affirmative Action employer and evaluate all applicants regardless of race, color, religion, sex, sexual orientation, gender identity, pregnancy, national origin, disability, or protected Veteran status. We participate in the E-Verify system to verify work authorization in the U.S. Applicants are encouraged to apply within 5-15 days of posting for optimal consideration. We prioritize a supportive work environment, professional development, and a healthy work-life balance and our pay and benefits aim to enhance employee well-being. If this culture resonates with you, we invite you to apply. If you're uncertain about your fit, please explore other roles on SA-TECH Careers. All responses will be handled with strict confidentiality. ** Please note that any provided salary information is a general guideline. SA-TECH considers factors such as (but not limited to) scope and responsibilities of the position, the candidate's work experience, education, training, and skills as well as market and business considerations when extending offers.

Arcadis is the world's leading company delivering sustainable design, engineering, and consultancy solutions for natural and built assets. We are more than 36,000 people, in over 70 countries, dedicated to improving quality of life. Everyone has an important role to play. With the power of many curious minds, together we can solve the world's most complex challenges and deliver more impact together. Role description: We are currently seeking an engineering intern to join our Water Business Line in our El Paso office! We work to protect our natural environment and water resources, while powering our world for future generations. Around the world, we're feeling the effects climate change, rapid urbanization, loss of biodiversity. The rate at which we're seeing large-scale, unforeseen events such as floods and wildfires, is becoming more frequent. We are here to protect our natural environment and water resources, while powering our world for future generations. Role accountabilities: In this role responsibilities include evaluating, planning, and designing projects for water, wastewater, and stormwater treatment and conveyance which encompasses pipelines and pumping facilities. You will also be responsible for assessing, developing, and supporting the management of sustainability and resilience projects including conducting vulnerability and mitigation assessments, as well as planning and designing utilities, municipalities, and cities. Additionally, you will perform essential fieldwork activities such as conducting field site visits, collecting samples, performing water quality analyses, evaluating technologies, and gathering plant operations information. You will also be involved in troubleshooting processes and optimizing operations. Support for asset management projects by conducting data analytics, operational and organizational assessments, condition assessments, and overall performance evaluations of water, wastewater, and stormwater facilities will also be key components of your position. In addition to the responsibilities mentioned, you will also: Support preparation of reports, presentations, and other audio-visual materials, and participate in client meetings. Ensure project compliance with all Arcadis practices and quality, health and safety standards, and facilitate coordination for timely completion and submission of projects on time and budget. Work independently and as part of a team, with the flexibility to accommodate collaboration with team members across the U.S. and internationally. Learn and use digital tools to enhance customer experience, team and client collaboration, and project delivery including configuration and deployment of SharePoint, Building Information Modeling (BIM), Power BI, and Augmented Reality. Qualifications & Experience: Required Qualifications: Pursuing a BS in Civil, Environmental, or Water Resources Engineering, or another closely related academic discipline. Knowledge of engineering concepts, theories, and practices related to water/wastewater/stormwater. Proficient in Microsoft Office Excel, Word, and PowerPoint. Preferred Qualifications: Prior internship or coursework in water/wastewater, water resources, or related sectors. EIT certification. Why Arcadis? We can only achieve our goals when everyone is empowered to be their best. We believe everyone's contribution matters. It's why we are pioneering a skills-based approach, where you can harness your unique experience and expertise to carve your career path and maximize the impact we can make together. You'll do meaningful work, and no matter what role, you'll be helping to deliver sustainable solutions for a more prosperous planet. Make your mark, on your career, your colleagues, your clients, your life and the world around you. Together, we can create a lasting legacy. Join Arcadis. Create a Legacy. Our Commitment to Equality, Diversity, Inclusion & Belonging We want you to be able to bring your best self to work every day which is why we take equality and inclusion seriously and hold ourselves to account for our actions. Our ambition is to be an employer of choice and provide a great place to work for all our people. We are an equal opportunity and affirmative action employer. Women, minorities, people with disabilities and veterans are strongly encouraged to apply. We are dedicated to a policy of non-discrimination in employment on any basis including race, creed, color, religion, national origin, sex, age, disability, marital status, sexual orientation, gender identity, citizenship status, disability, veteran status, or any other basis prohibited by law. Arcadis offers benefits for full time and part time positions. These benefits include medical, dental, and vision, EAP, 401K, STD, LTD, AD&D, life insurance, paid parental leave, reward & recognition program and optional benefits including wellbeing benefits, adoption assistance and tuition reimbursement. We offer nine paid holidays and 15 days PTO that accrue per year. The salary range for this position is $17.00 - $31.00 / hour. Actual salaries will vary and are based on several factors, such as experience, education, budget, internal equity, project and location. #LI-RG2 #Resilience-NA