Heavy equipment operator jobs in Waycross, GA

Heavy Equipment Operator Grade 13 Salary: $40,872.00 ($19.65 hr) - $44,179.20 ($21.24 hr) Supervisor: Travis McLendon - Roads Superintendent PURPOSE OF CLASSIFICATION The purpose of this classification is to operate heavy equipment and perform manual work functions associated with transportation of materials and construction, maintenance and repair of county landfills, roads, bridges, and drainage systems. ESSENTIAL FUNCTIONS The following duties are normal for this position. These are not to be construed as exclusive or all-inclusive. Other duties may be required and assigned. Operates a variety of heavy equipment, machinery and tools used in construction, maintenance and repair of county landfills, roads, bridges, and drainage systems (which may include a compactor, front-end loading truck, motor grader, bulldozer, scraper, asphalt spreader); operates all other equipment, machinery, and tools as assigned. Performs manual work functions associated with construction, maintenance and repair of county landfills, roads, bridges, and drainage systems (which may include constructing/repairing bridges; building/repairing roads; patching holes; rolling/packing asphalt; moving soil/earth; grading roads, shoulders, or other areas; digging holes or trenches; installing pipe; shoveling asphalt, road mix, rock, dirt, etc.; trimming and clearing shrubbery; removing trees and tree limbs; removing debris from ditches and right-of-ways; hauling materials; or loading and unloading trucks). Transports, loads, and unloads various equipment and materials used in projects. Monitors equipment gauges and other indicators for non-standard conditions; reports faulty equipment for repair; performs basic equipment repairs. Performs general maintenance tasks necessary to keep equipment/machinery in good working condition (which includes inspecting equipment, checking condition of tires, checking/replacing fluid levels, greasing equipment, and washing/cleaning equipment). Cleans/maintains grounds and buildings of county facilities as needed; cleans/maintains areas around compactors and trash receptacles. Prepares and/or receives various forms, logs, reports or other documents; processes and forwards as appropriate. Communicates via telephone and/or two-way radio; provides information; takes and relays messages; responds to requests for service. Responds to routine requests for information from employees, officials, the public or other individuals. ADDITIONAL FUNCTIONS May supervise activities of inmates on assigned work details. May provide direction and training to other staff as assigned. Conducts various errands as assigned (e.g., pick up parts or supplies). Performs other related duties as required. KNOWLEDGE, SKILLS, AND ABILITIES Knowledge of the principles, practices, and methods of operating and servicing trucks and heavy construction equipment; knowledge of the traffic laws and regulations governing equipment operation; knowledge of the occupational hazards involved and the safety precautions necessary to the proper operation of varied construction and maintenance equipment; knowledge of departmental functions, organization, and policies; knowledge of basic equipment and vehicle maintenance practices and procedures; and knowledge of the security procedures associated with supervising inmate work details. Skill in operating a variety of trucks and small, medium, and heavy construction equipment; skill in driving; and skill in performing basic equipment and vehicle maintenance tasks. Ability to operate a variety of trucks and small, medium and heavy construction equipment; ability to understand departmental policies, procedures, rules and regulations; ability to understand and follow simple written and oral instructions; ability to communicate effectively both orally and in writing; ability to establish and maintain effective working relationships with employees and the general public; ability to direct the work of inmates and subordinates; ability to perform basic equipment and vehicle maintenance tasks; ability to perform manual work; ability to stoop, kneel, climb, or otherwise physically maneuver with equipment and on work sites; and ability to safely lift and/or carry weights of up to 100 pounds. MINIMUM QUALIFICATIONS Completion of tenth grade level education required; one year of experience in operating heavy equipment and performing manual labor, or a related field; or any equivalent combination of education, training, and experience which provides the requisite knowledge, skills, and abilities for this job. Must possess and maintain a valid Georgia Driver's License. Required to possess and maintain a valid Georgia Commercial Driver's License. MINIMUM REQUIREMENTS TO PERFORM ESSENTIAL JOB FUNCTIONS PHYSICAL REQUIREMENTS: Must be able to operate a variety of machinery, equipment, and tools which may include a dump truck, compactor, front-end loading truck, roll-off truck, flatbed truck, roller, motor grader, backhoe, bulldozer, soil pan, water truck, tractor, wood grinder, bush hog, mower, chain saw, shovel, and mechanic tools. Physical demand requirements are at levels of those for heavy work. DATA COMPREHENSION: Requires the ability to compare and/or judge the readily observable functional, structural, or compositional characteristics (whether similar to or divergent from obvious standards) of data, people, or things which may include forms, reports, blueprints, and reference manuals. INTERPERSONAL COMMUNICATION: Requires the ability to speak with and/or signal people to convey or exchange mechanical and construction-related information, including giving assignments and/or directions to co-workers or assistants as well as communicating with the general public. LANGUAGE ABILITY: Requires ability to read a variety of mechanical and construction-related documentation, directions, instructions, and methods and procedures. Requires the ability to complete forms and to write basic job-related documentation with proper format, punctuation, spelling and grammar, using all parts of speech. Requires the ability to speak with and before others with poise, voice control, and confidence using correct English and well-modulated voice. INTELLIGENCE: Requires the ability to learn and understand basic mechanical and construction-related principles and techniques; to understand departmental policies and procedures; to make independent judgments in absence of supervision; and to acquire and be able to expound on knowledge of topics related to primary occupation. VERBAL APTITUDE: Requires the ability to record and deliver information, to explain procedures, and to follow verbal and written instructions. NUMERICAL APTITUDE: Requires the ability to add and subtract totals; multiply and divide totals; and determine time and weight. FORM/SPATIAL APTITUDE: Requires the ability to visually inspect items for proper length, width, and shape using job related equipment. MOTOR COORDINATION: Requires the ability to coordinate hands and eyes in using job related machinery and equipment and to operate motor vehicles. MANUAL DEXTERITY: Requires the ability to handle a variety of items, machinery and equipment, control knobs, switches, etc. Must have the ability to use one hand for twisting motion or turning motion while coordinating other hand with different activities. Must have average levels of eye/hand/foot coordination. COLOR DIFFERENTIATION: Requires the ability to discern color. INTERPERSONAL TEMPERAMENT: Requires the ability to deal with and relate to people beyond giving and receiving instructions. Must be able to adapt to and perform under moderate stress when confronted with an emergency. PHYSICAL COMMUNICATION: Requires the ability to talk, express, or exchange ideas by means of spoken words and/or hear and perceive nature of sounds by ear.

Join Our Team in Beautiful Martin County, Florida! The Martin County Board of County Commissioners is hiring! Are you ready to make a real impact in your community while enjoying the unmatched lifestyle of the Treasure Coast? We're looking for talented professionals who are passionate about public service, innovation, and shaping the future of Martin County. Why Work With Us? * Competitive Pay & Full Benefits Package * Florida Retirement System (FRS) Pension * Generous Paid Time Off & Holidays Now Hiring: Senior Heavy Equipment Operator Location: Martin County, FL Department: Public Works Department Salary: $46,462.18 Click here to view the full job description and apply now! Be a part of something bigger. Serve your community. Grow your career.

Job DescriptionDescription: As the Southeast's premier site development and environmental construction contractor, CBP Environmental, takes pride in the reputation for excellence we've earned over the past three decades where our integrity is matched only by our skill set. We are seeking to add heavy equipment operators to our team to work on heavy civil construction projects with our valued customers in the environmental construction sector. CBP Environmental offers unparalleled professional growth opportunities and an outstanding compensation and benefits package that includes full health care coverage including dental and vision plans, 401k plan with generous company match, along with paid vacation and holidays. Salary is based upon experience. Position Responsibilities: Operate all heavy equipment in a safe and efficient way according to all relevant policies and procedures. Perform daily safety and maintenance checks. Clean heavy equipment as scheduled and/or required. Ensure heavy equipment is safely and securely stored. Advise Management of any requirements for maintenance or repairs. Participate in routine maintenance. Practice workplace safety. CBP Environmental, Inc. is a drug-free company and an equal opportunity employer. All applicants are required to submit and pass a background screening, physical, and E-Verify Check. Requirements: 1+ years' experience in Heavy Earthmoving Equipment Operations (i.e. excavators, dozers, articulated trucks, etc.), or the equivalent in training. Knowledge of safe & productive operation of heavy equipment. Must have and maintain a valid driver's license. Successful completion of pre-employment drug & alcohol and medical/physical capability requirements. Successful criminal background screen may be required. Ability to be a team leader in all safety aspects of the position. Position will require travel and possible weekend work. Must be willing to work over-time. Required Education: High School or equivalent.

Job Description The Equipment Operator will work collaboratively with the Laborers and Foreman for completion of jobsite activities. Essential Duties and Responsibilities Ability to operate various pieces of heavy equipment, including excavators, loaders, dozers, graders, rollers, backhoes, etc. Use various pieces of equipment to perform fine grading and finishing, sloping, and banking, backfilling, demolition, ditching, loading, excavating, and stockpiling. Utilize GPS systems, read and understand grade stakes and hubs for grade control and finishing Ensure adherence to safe work practices and procedures Work outdoors on location in all weather conditions and on all terrain Perform daily safety and maintenance checks on equipment Repair or assist in the repair and maintenance of the construction vehicles Perform preventive maintenance on equipment as required including fluid and filter changes and parts lubrication Clean equipment as scheduled or when required Ensure equipment is safely and securely stored when finished for the day Practice workplace safety per OSHA standards Ability to work independently and to stay on top of the schedule Willingness to do work outside of equipment operations, which includes but is not limited to general labor work Maintains a neat appearance and dresses appropriately for the job Good attendance Is a team player, and communicates well Presents a positive attitude about the company and the job Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education and/or Experience Proven ability to operate heavy equipment Valid driver/operator license High school diploma or equivalent or at least one year of experience Knowledge of light and heavy equipment operation and maintenance Knowledge of basic equipment and vehicle inspection and maintenance including tire pressure, checking oil and water levels Ability to read, understand, follow, and enforce safety procedures Must always present a professional image, representing self and company in a professional, courteous and respectful manner when dealing with customers, vendors, employees and the public Skilled with various hand and power tools Competent operating excavators, backhoe, trencher, etc. Physical Requirements Sit, stand, and walk continuously throughout the scheduled workday Stand, reach, drive and use fine motor skills frequently throughout the day Bend, kneel, squat, and climb throughout the workday Lift from 10 to 150 pounds Work both indoors and outdoors, exposed to all weather conditions and may be in loud environments Must work in a manner that will not jeopardize the health and safety of him/herself or others Language Skills Must be able to read and comprehend English The above statements reflect the general details necessary to describe the principal functions of the occupation described and shall not be construed as a detailed description of all the work requirements that may be inherent in the occupation. All applicants must be willing to submit to a pre-employmentdrug test, background check, and motor vehicle recordcheck. **Equal opportunity employer, including veterans, and individuals with disabilities**

Anderson Columbia Co. Inc. - accepting resumes for Equipment Operators (Roller/Screed/Dozer/Loader/Grader/Skid Steer/Trackhoe). Since 1958, Anderson Columbia has been an industry leader in paving and road building, making smooth stomping grounds for vehicles of all kinds. We strive to construct roads from the highest quality materials and apply ourselves to ensure the job is done right. From small backstreets to congested highways, we perform jobs of all proportions and create pavement in a way that makes the ride enjoyable. We pride ourselves on being one of the Largest Construction & Aggregate Producing Contractors in Florida. Our sense of professionalism paired with our teams of highly-trained personnel allows us to be successful at every job we employ. Anderson Columbia doesn't just hire employees into a company, we hire people into our family; after all, people are our greatest asset. If you appreciate the feeling of sweat on your forehead, the sense of accomplishment at the end of a long day, or the pride in calloused hands, Anderson Columbia may have a place for you. Monday - Friday ( Some Saturdays ) Full Time Position Pay Rate- Starting $16 - $17 /Hr + DOE* Must possess the ability to adapt to different personalities and management styles, team player with strong interpersonal skills, dedicated and hard working. Requirements Must be able to pass Pre-Employment screenings and physical Must have reliable transportation. Must have at least one year experience (Roller/Screed/Dozer/Loader/Grader/Skid Steer/Trackhoe). Must be willing to travel a 45 minute radius of Lake City Must have valid drivers license. Benefits 401K Match Medical Dental Vision DFW / EOE Disclaimer The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed.

Heavy Equipment Operator 💰 Pay: Competitive hourly rate based on experience Join Our Team as a Heavy Equipment Operator! We're seeking an experienced Heavy Equipment Operator to safely operate a CAT 938-wheel loader or equivalent for material handling and site operations. If you thrive in a hands-on, fast-paced environment and have a commitment to safety and efficiency, we want to hear from you! What You'll Do: ✅ Operate heavy equipment (excavators, bulldozers, loaders, forklifts) to move materials safely and efficiently ✅ Assist drivers in tarping loads as needed. ✅ Walk the yard and pick up debris and trash using the provided tools ✅ Work in outdoor conditions including heat, cold, rain, dust, dirt, and strong odors. ✅ Must be comfortable working in an environment that is dusty, dirty, and may smell of trash. ✅ Follow all safety regulations (OSHA, local, state, and federal guidelines) ✅ Keep work areas clean and properly store equipment after shifts ✅ Assist with additional tasks as needed What's in It for You? ✔ Comprehensive Medical Coverage - Health, vision, and dental insurance ✔ Paid Time Off - Vacation and sick leave ✔ Optional Life Insurance - Additional financial security ✔ Stable Career Opportunity - Work with a growing company in a high-demand industry What You'll Need to Succeed: 🔹 Must be at least 18 years old 🔹 Authorized to work in the United States 🔹 Experience operating heavy equipment (preferred) 🔹 Ability to lift up to 75 lbs 🔹 Strong attention to safety and detail 🔹 Must have effective audio and visual perception for job duties 🚜 Ready to put your skills to work? Apply today and build your career with us! 🚧 Pay Range Up to USD $22.00/Hr.

Responsibilities Brasfield & Gorrie is currently accepting applications for a Heavy Equipment Operator. Below are the main responsibilities for this position. ) * Operate several types of power construction equipment, such as excavator, backhoe, dozer, skid steer and vibratory compactor or motor graders to excavate, move and grade earth, erect structures, or pour concrete or other hard surface pavement. * May repair and maintain equipment in addition to other duties. * Must adhere to safety protocol, and work in a drug-free environment. Education - Skills - Knowledge - Qualifications & Experience 3 years Industrial Construction Equipment Operator experience preferred. EOE/Vets/Disabilities

Build Your Career. Build America's Future Vulcan Materials Company is the nation's largest producer of construction aggregates and a major producer of aggregates-based construction materials including asphalt and ready-mixed concrete. When you join Vulcan, it's more than starting an exciting career - you get to make a difference for millions of people every day across the country. When you join Vulcan, you join a dynamic culture in which career development is encouraged, excellence is rewarded and diversity is valued. No matter the role or the location across the country, every member of the Vulcan team lives through the Vulcan Way: doing the right thing, the right way, at the right time. We're Coming Back Together To Be Together 100% In Office & Onsite At Vulcan Materials, we believe that the heart of our success lies in the strength of our engagement, our connection, and our commitment to developing our people. We are excited to restore the collaborative in-person environment that fuels our innovation and growth. This move is not just about being physically present; it's about reigniting the spirit that comes from face-to-face interactions, fostering a collaborative, inclusive culture where every voice is heard and everyone thrives. What You'll Do: Champion Safety. Take an active role in prioritizing safety throughout the operation for yourself and others at all times in accordance with MSHA and Vulcan standards. Follow established traffic patterns, avoiding hazardous conditions and immediately reporting unsafe ones. Operate Mobile Equipment Loaders. Operate mobile equipment loaders to load aggregates for processing, feed the plant, and safely load customers' trucks with desired specification product within legal load limits. Operate a loader to strip and prep the mining site and push material closer to the feeder for processing. Monitor Materials. Maintain an adequate feed of materials and maintain stockpiles. Visually inspect materials for compliance with specifications. Perform Inspections and Maintenance. Perform thorough pre-trip and post-trip inspections and accurately complete daily mobile equipment reports. Observe the plant and report any necessary maintenance or adjustments that may be required. Clean yard and plant areas. Participate in maintenance, repair, and general plant housekeeping activities. Monitor Processes, Materials, or Surroundings. Monitor the plant and operations and report any necessary maintenance or adjustments that may be required to ensure safety. Skills You'll Need: Experience. 1 plus years experience operating loaders and dozers in a plant environment preferred. Functional and Safety Knowledge. Must have a solid knowledge and understanding of the equipment's capabilities and specifications of different finished materials. Must recognize various products by sight and understand proper plant operation. Must have a solid knowledge and understanding of OSHA and MSHA rules and regulations. Must have hazard recognition skills. Flexibility. Must be able to work overtime and extended hours depending on customer and company demands. Must be able to work outside in all types of weather conditions and tolerate being exposed to loud noises. Ready to Drive. Must have a valid driver's license with a clean driving record. Interpersonal Skills. Must have good communication skills and the ability to work in a team environment. Must respond to inquiries promptly and follow through to address issues. What You'll Like About Us: Great Company Culture. Our people share a competitive drive for excellence in an environment of trust, teamwork, open-mindedness, and communication. Safe. Industry leader in health and safety standards. We are committed to creating a safe work environment and protecting all employees and customers. Meaningful Work. What sets us apart is the work we do impacts daily lives - and every employee contributes. Our aggregates produced are used to build roads, schools, hospitals, airports, and housing throughout the United States. Health Benefits. Medical, Dental, Vision programs, plus much more. Rest and Relaxation. Paid vacation, personal floating days, and paid holidays. Prepare for the Future. 401(k) with company match and contribution. Training and Development. We see our development programs and helping our employees meet their goals as a key part of our business. Vulcan Materials Company is committed to employing a diverse workforce. You will receive consideration without regard to race, color, religion, sex, national origin, age, sexual orientation, gender identity, gender expression, veteran status, or disability. You also have the right to be free from discrimination for medical needs arising from pregnancy, childbirth, or related medical conditions.

As we create a colorful, capable and cleaner world through chemistry, we invite you to join our team to harness the power of chemistry to shape markets, redefine industries and improve lives for billions of people around the world. Heavy Equipment Operator Chemours is seeking a Heavy Equipment Operator to join our growing Mission Mining team! This position will report directly to the Production Shift Supervisor in our Nahunta, GA location. JOB SUMMARY Responsible for operating heavy mobile equipment of various sizes and weights for mining and mineral processing facilities operating 24-hours per day, 7-days per week such as bulldozers and excavators in support of active mining operations. This earth moving position will work collaboratively with a team of 8 to 10 operators, under the direction of the Production Shift Supervisor, focused on the safe and efficient delivery of raw ore to mine processing facilities and management of sand tails. The responsibilities of the position include, but are not limited to, the following: Daily activities Ensure all work is performed within company, state, and federal regulations, standards, statutes, policies, and procedures. Safely and efficiently operates various pieces of mobile heavy equipment including bulldozers and tracked excavators. Identify and promote opportunities to improve mine safety performance, act as a safety leader. Safely drive and maneuvers equipment into position for digging, loading, hauling, dumping, pushing, and/or spreading material in designated work areas. Receive and execute written or oral instructions regarding material movement or excavation. Ensure operation of equipment is within machine capabilities and limitations. Performs pre-shift and post-shift safety inspections, reporting and logging maintenance requirements or concerns. Complete production reporting and other documentation as required. Responsible for routine vehicle inspections, fluid/air checks, fueling of off-road equipment. Ensure heavy equipment is safely and securely stored. Ability to assist maintenance personnel in performing mechanical maintenance and repairs as needed. Communicate effectively and professionally with other team members. Goals for the role Act as a Safety Leader to ensure individual and team Safety remain top priority in the planning and execution of all tasks. Work closely with Company Environmental, Health and Safety (EHS) personnel targeting zero incidents and continuous improvement of mine site EHS performance. Continuous improvement in mining approach, encourage initiatives intended to reduce safety risk, increase productivity, improve efficiency and reduce operating cost. Responsibilities Work in a self-guided manner in the absence of supervision and demonstrate creativity, exercise sound judgment, and demonstrate initiative. Report all personal injuries and EHS incidents and assist with both safety and environmental investigations. Clean heavy equipment as scheduled and ensure a high standard of housekeeping is maintained in all assigned work areas. Maintain knowledge of safe work practices and procedures. Attend meetings and classes as identified by Southern Ionics Minerals, LLC. In order to be qualified for this role, you must possess the following: High School diploma or equivalent (GED) and ability to read and write the English language. Experience operating equipment preferred but not required to include tracked excavators, wheeled loaders, track type tractors (bulldozers), motor graders, and skid steers. Training to be provided. Ability to work a rotating schedule and/or varying shifts and must be punctual in adhering to established start times; attendance at work is an essential function to the performance of this position. Ability to work any shift, holidays, weekends, and overtime as needed. Ability to pass a motor vehicle check. Physical Requirements: Regularly required to use hands, fingers, and feet in a coordinated effort to move levers, depress foot pedals, and turn dials to operate power machinery. Specific vision abilities required, including close vision, distance vision, peripheral vision, depth perception and the ability to adjust focus. Frequently ascends or descends ladders, stairs, elevated walkways, ramps and the like, using feet and legs and/or hands and arms. Must be able to remain in a stationary position 80% of the time in the operation of mobile equipment. Capable of wearing personal protective equipment, such as hearing protectors and respirators, as necessary. Benefits: Competitive Compensation Comprehensive Benefits Packages 401(k) Match Employee Stock Purchase Program Tuition Reimbursement Commuter Benefits Learning & Development opportunities Strong Inclusion & Diversity initiatives Company-paid volunteer days WE'RE CHEMOURS. A DIFFERENT KIND OF CHEMISTRY COMPANY We are on a journey to create a more colorful, capable, and cleaner world through the power of chemistry. We've completed our transformation and now we're earning our way to growth by advancing higher value chemistry. Built upon a 200-year-old legacy and a world-class product portfolio, we bring everyday convenience to virtually everything people touch-in industries ranging from automotive, paints, and plastics to electronics, construction, energy, and telecommunications. OUR APPROACH The “ours” in Chemours is for all of us who work here. We're working together to improve people's lives the world over. OUR CULTURE Our culture is built upon our values: Customer Centered, Refreshing Simplicity, Unshakable Integrity, Safety Obsession, and Collective Entrepreneurship. We're honored to be named a “Great Place to Work-Certified Company” for 2018-2019 and a “2018 Top Workplace” by Delaware News Journal. WHAT SETS US APART Chemours has the heart and energy of a startup, while being built upon a 200-year old legacy and a world-class product portfolio. A startup with a head start. This mentality drives both our strategy and employees. We believe a thriving workforce culture is essential to our success. We're earning our way to growth by unleashing the power of our talented, experienced, and passionate employees. Chemours is an equal opportunity employer Chemours is an E-Verify employer Candidates must be able to perform all duties listed with or without accommodation Immigration sponsorship (i.e., H1-B visa, F-1 visa (OPT), TN visa or any other non-immigrant status) is not currently available for this position At Chemours, you will find sustainability in our vision, our business and your future. If you want to work on the leading edge of your field and have a desire to make a difference, join Chemours and discover what it means when we say “We Are Living Chemistry”.

Job DescriptionSalary: Our Mission is to Identify, Hire, Train and Retain the very best people! Could that be you? Join the Ace Electric team for opportunities to work with the best team and build your career with Ace University! Since our inception in Valdosta, GA in 1975, Ace has been performing quality electrical installations in a full range of markets including: commercial, mission critical, education, healthcare, institutional, industrial, correctional facilities, hospitality, military bases, retail and others. In the past 15 years, locations have been added in Macon, GA, Atlanta, GA, Jackson, TN, Statesboro, GA, Sanford, NC and Plain City, OH. Ace offers fabrication services, hard bid, design-build, negotiated contracts and fee-based work. We have the resources, professional staff and project management team to handle almost any type of electrical project. Our history of safety and quality has been established through years of successful projects and satisfied customers. Ace Electric is growing bigger in business each year and has no signs of slowing down! Benefits: Health, Dental, Vision, Life, Disability, Accident and Critical Illness Insurances 401k with Match Access to Ace University: Apprenticeship Program, Leadership Training, Skill Building Classes and much more! General Summary: The Heavy Equipment Operator may also serve as an Electrical Helper and is responsible for working hand in hand with skilled electricians on job sites to assist with trenching, excavating and installing underground electrical system materials into trench or excavation. May spend time working under the supervision of skilled electricians in the practice of bending and installing conduit and wire as well as other electrical construction activities related to site work. Preferred Job Skills: Able to maintain professional appearance and conduct at all times. OSHA 10 Hour, CPR, and First Aid trained. Able to maintain high levels of productivity, meeting deadlines while maintaining accuracy. Must be an effective and professional communicator. Mandatory Hiring Requirements: References, Background Check, Drug Screen Testing, Valid Drivers License. Responsibilities: Operates Backhoe and Trackhoe at high skill level. Operates Excavator at high skill level. Operates Mini Excavator at high skill level. Operates Skid Steer at high skill level. Operates riding Trencher at high skill level. Operates trench and plate compactors at high skill level. Digs trenches by use of hand tools and equipment. Maintains a safe work environment, follow all safety guidelines. Keeps equipment maintained daily. Helps in securing, relocating and organizing materials, small tools and equipment from and to appropriate storage areas. Keeps work area and equipment clean by collecting and disposing of scrap, excess materials and refuse. Keeps equipment, tools and material clean and organized. Assists in pulling wire, lifting, shoveling, raking, hoisting and positioning materials. Assists in placing and burying underground conduit. Performs basic underground conduit installations under close supervision. Assists with electrical installations, connections and terminations under close supervision as needed. Reads and interprets site drawings and site electrical drawings. Reads and interprets equipment maintenance manuals. Reads and interprets grade stakes and layout stakes. Position Requirements: License: Commercial Drivers License Class A preferred. DOT Medical Certificate according to the requirements in 49 CFR 391.41-49 if a Class A Driver's license is held. Education:High School diploma or GED equivalent. Experience: At least 2 years of verifiable experience as a Heavy Equipment Operator. Working Conditions: Job requires working in all-weather elements; heat, cold, rain, or snow, depending on job location and time of year. Must be able to utilize construction site sanitary facilities (Porta-Johns). Job requires employee to have required personal tools with him at all times (waist tool belt as worn weighs approximately 30 lbs.). Work from all types of ladders and be able to transport/relocate ladders unassisted. Employees personal weight with tools cannot exceed the rated weight capacity of ladders used. Perform work at various heights, up to 90 feet from ladders, scaffolds, aerial work platforms, cat walks and other safe work areas. Work in restricted or confined areas such as switch gear-rooms, manholes, utility tunnels and crawl spaces. Must wear all personal protective equipment as required Must be able to regularly work 40 hours per week plus overtime as required. Night shifts, weekends, and travel/out-of-town work is required. Required Physical/Mental Functions: Positively identify colors of wire and other items as required. Comprehension of construction drawings, schematics and specifications. Bend conduit using hand benders. Must have the ability to safely use required power tools. Must be able to safely operate construction equipment (trencher, forklift, aerial work platforms, etc.). Capable of digging trenches, using of hand tools or power equipment. Comprehend and practice safe work procedures as outlined in Company Safety Handbook. Operate two handed tools as required. Cable cutters, hammer drills, compression tools, etc. Operate company truck with manual and automatic transmission. Read and interpret maps, instructional manuals, work site directions, and written instructions. Must hear and see well (either natural or with correction). Must be able to bend, stoop, squat, crawl, climb, kneel, balance, push, pull and reach overhead. Able to lift objects weighing up to 75 pounds, with frequent lifting and carrying of objects weighing up to 20 pounds. Tolerant to prolonged standing and movement on foot. Climb ladders (all types). Repetitive use of arms, hands, and fingers. Completing overhead work for full day assignments. Must be able to make transition from employee parking area or street into construction work areas and to gain access to all levels of the building, even if the only means of access is by O.S.H.A. approved site construction ladder or stairs still under construction but acceptable for use. Must be able to secure tools and materials from storage areas to complete assigned tasks. AAP/EEO Statement: Ace Electric, Inc. is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identification, national origin, disability status, protected veteran status, or any other category protected by federal, state, or local law.

Job Description Heavy Equipment Operator Public Works FLSA: Non-Exempt Minimum Pay: $18.85 This position operates heavy equipment in support of assigned public works construction and maintenance projects. MAJOR DUTIES Operates front end loader, bulldozer, backhoe, excavator, roller, tractor, motor grader, and other equipment as assigned. Unloads and loads equipment for transport; operates a lowboy to transport equipment. Operates a dump truck to haul materials. Operates a transit to shoot grade. Assists in traffic control at work sites. Performs pre- and post-trip vehicle and equipment inspections. Performs preventative maintenance on equipment. Operates a variety of hand and power tools. ADDITIONAL DUTIES Performs other work as required or when directed by administration. In the event of an emergency, all Camden County employees are considered essential and may be required to perform alternate duties. The above cited duties and responsibilities describe the general nature and level of work performed by people assigned to the job. They are not intended to be an exhaustive list of all the duties and responsibilities that an incumbent may be expected or asked to perform. The omission of specific statements of duties or responsibilities does not exclude them from the classification if the work is similar, related, or a logical assignment for this classification. Other duties may be required and assigned. KNOWLEDGE REQUIRED BY THE POSITION Knowledge of the techniques, equipment, and supplies used in public works maintenance. Knowledge of county and departmental safety policies and procedures. Knowledge of the geography of the county, including road names and locations. Skill in the operation of assigned vehicles, trucks, and heavy equipment. Skill in prioritizing and organizing work. Skill in the use of hand and power tools. Skill in oral and written communication. SUPERVISORY CONTROLS The supervisor assigns work in terms of general instructions. The supervisor spot-checks completed work for compliance with procedures, accuracy, and the nature and propriety of the final results. GUIDELINES Guidelines include traffic laws, work safety policies, and county policies and procedures. These guidelines are generally clear and specific but may require some interpretation in application. COMPLEXITY/SCOPE OF WORK The work consists of related equipment operation duties. Inclement weather and heavy traffic contribute to the complexity of the position. The purpose of this position is to operate heavy equipment in support of a variety of department operations. Successful performance contributes to the provision of safe and well-maintained county infrastructure. CONTACTS Contacts are typically with coworkers and the general public. Contacts are typically to exchange information, resolve problems, and provide services. PHYSICAL DEMANDS/ WORK ENVIRONMENT The work is typically performed while intermittently sitting, standing, bending, crouching, or stooping. The employee frequently lifts light and heavy objects, climbs ladders, uses tools or equipment requiring a high degree of dexterity, distinguishes between shades of color, and utilizes the sense of smell. The work is typically performed outdoors, occasionally in cold or inclement weather. The employee is exposed to dust, dirt, grease, and machinery with moving parts. The work requires the use of protective devices such as masks, goggles, gloves, etc. SUPERVISORY AND MANAGEMENT RESPONSIBILITY None. MINIMUM QUALIFICATIONS Knowledge and level of competency commonly associated with completion of specialized training in the field of work, in addition to a high school diploma. Sufficient experience to understand the basic principles relevant to the major duties of the position, usually associated with the completion of an apprenticeship/internship or having had a similar position for one to two years.

Watson Civil Construction, Inc. is a heavy/highway contractor working throughout Florida specializing in large site infrastructure, underground, and road work. We are a fast-growing company that is currently looking for experienced Heavy Equipment Operators in the Fort Myers area. The primary responsibility of the Heavy Equipment Operator is the safe and efficient operation of heavy equipment including excavators, bulldozers, off-road trucks, loaders, motor graders, rollers, and tractors. We offer a complete compensation package including: * Competitive Salary * PTO eligible after 90 days * 6 paid holidays * 401(k) with company match * Health, dental, vision, life, STD, LTD after 60 days * Overtime Watson Civil Construction is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, national origin, disability status, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by law.

Job DescriptionDescription: TEFCO Transportation is a specialized heavy haul transportation company. We are currently looking for experienced 4 axle operators to transport over sized and over dimensional project based loads for our customers. We travel throughout the South East. This position will require overnight travel. If you are interested in learning more about or company, visit our website tefcotransportation.com. Summary: Heavy Haul Transport Operator / CDL A oversize over-dimensional Truck Driver will operate a multi-axle piece of equipment in our heavy haul trucking division. A driver in this classification utilizes their assigned truck and trailer to facilitate transportation of heavy equipment within a time sensitive duration. Duties and Responsibilities of a Class A/CDL A Heavy Haul Transport Operator / Heavy Equipment Truck Driver: Operate Heavy Haul truck and trailer in a safe and courteous manner. Acknowledge and carry out written/oral instructions from dispatchers and customers. Transport heavy loads to customers in a timely manner. Ensure delivery of appropriate items in accordance with customer invoices. Ensure tractor and trailer are clean and in good working condition. Posses mechanical knowledge of assigned equipment. Perform daily maintenance checks and reports malfunctions to management/mechanics. Document and communicate repair requests to mechanics. Ensure customer messages/communications are relayed to appropriate management. Assist in maintaining a neat and clean workplace. Provide exceptional customer service. Complete Bill of Ladings. Comply with E-Log rules and regulations. Perform alternative tasks as assigned by supervisor. Work Environment of a Class A/CDL A Heavy Haul Transport Operator / Heavy Equipment Truck Driver: While performing the duties of the Heavy Haul Transport job, the driver is frequently exposed to outdoor weather conditions. The driver is occasionally exposed to work near moving mechanical parts; work in high, precarious places; toxic or caustic chemicals; risk of electrical shock and vibration. The noise level in the work environment is usually moderate. Physical Demands of a Class A/CDL A Heavy Haul Transport Operator / Heavy Equipment Truck Driver: The physical demands must be met by a driver to successfully perform the essential functions of the heavy haul transport job. The driver must frequently lift and/or move up to 50 pounds. While performing the duties of this job, the heavy haul transport driver is frequently required to stand, walk, sit, reach with hands and arms; climb or balance and stoop, kneel, crouch, or crawl. Compensation: Average annual pay range commensurate with experience: High-Level experience $95,000 - $120,000 | Mid-Level: $80,000 to $95,000| Entry- Level: $65,000 to $80,000 Requirements: Must pass a pre-employment drug test Must have a clean criminal background Must have a clean driving record Education/Experience: High school diploma or general education degree (GED) MUST have Two to Four years of driving experience of lowboy trailers, RGN's, double dropped and/or sliding axle trailers. Experience in loading and securement of heavy construction machinery and vehicles, such as excavators, bulldozers, and buses. Basic knowledge of industrial equipment. Certificates and Licenses: Valid Class A Driver's License Current DOT Physical TWIC

As we create a colorful, capable and cleaner world through chemistry, we invite you to join our team to harness the power of chemistry to shape markets, redefine industries and improve lives for billions of people around the world. **Heavy Equipment Operator** Chemours is seeking a Heavy Equipment Operator to join our growing Mission Mining team! This position will report directly to the Production Shift Supervisor in our Nahunta, GA location. **JOB SUMMARY** Responsible for operating heavy mobile equipment of various sizes and weights for mining and mineral processing facilities operating 24-hours per day, 7-days per week such as bulldozers and excavators in support of active mining operations. This earth moving position will work collaboratively with a team of 8 to 10 operators, under the direction of the Production Shift Supervisor, focused on the safe and efficient delivery of raw ore to mine processing facilities and management of sand tails. **The responsibilities of the position include, but are not limited to, the following:** + **Daily activities** + Ensure all work is performed within company, state, and federal regulations, standards, statutes, policies, and procedures. + Safely and efficiently operates various pieces of mobile heavy equipment including bulldozers and tracked excavators. + Identify and promote opportunities to improve mine safety performance, act as a safety leader. + Safely drive and maneuvers equipment into position for digging, loading, hauling, dumping, pushing, and/or spreading material in designated work areas. + Receive and execute written or oral instructions regarding material movement or excavation. + Ensure operation of equipment is within machine capabilities and limitations. + Performs pre-shift and post-shift safety inspections, reporting and logging maintenance requirements or concerns. + Complete production reporting and other documentation as required. + Responsible for routine vehicle inspections, fluid/air checks, fueling of off-road equipment. + Ensure heavy equipment is safely and securely stored. + Ability to assist maintenance personnel in performing mechanical maintenance and repairs as needed. + Communicate effectively and professionally with other team members. + **Goals for the role** + Act as a Safety Leader to ensure individual and team Safety remain top priority in the planning and execution of all tasks. + Work closely with Company Environmental, Health and Safety (EHS) personnel targeting zero incidents and continuous improvement of mine site EHS performance. + Continuous improvement in mining approach, encourage initiatives intended to reduce safety risk, increase productivity, improve efficiency and reduce operating cost. + **Responsibilities** + Work in a self-guided manner in the absence of supervision and demonstrate creativity, exercise sound judgment, and demonstrate initiative. + Report all personal injuries and EHS incidents and assist with both safety and environmental investigations. + Clean heavy equipment as scheduled and ensure a high standard of housekeeping is maintained in all assigned work areas. + Maintain knowledge of safe work practices and procedures. Attend meetings and classes as identified by Southern Ionics Minerals, LLC. **In order to be qualified for this role, you** **_must possess_** **the following:** + High School diploma or equivalent (GED) and ability to read and write the English language. + Experience operating equipment preferred but not required to include tracked excavators, wheeled loaders, track type tractors (bulldozers), motor graders, and skid steers. Training to be provided. + Ability to work a rotating schedule and/or varying shifts and must be punctual in adhering to established start times; attendance at work is an essential function to the performance of this position. + Ability to work any shift, holidays, weekends, and overtime as needed. + Ability to pass a motor vehicle check. **Physical Requirements:** + Regularly required to use hands, fingers, and feet in a coordinated effort to move levers, depress foot pedals, and turn dials to operate power machinery. + Specific vision abilities required, including close vision, distance vision, peripheral vision, depth perception and the ability to adjust focus. + Frequently ascends or descends ladders, stairs, elevated walkways, ramps and the like, using feet and legs and/or hands and arms. + Must be able to remain in a stationary position 80% of the time in the operation of mobile equipment. + Capable of wearing personal protective equipment, such as hearing protectors and respirators, as necessary. **Benefits:** + Competitive Compensation + Comprehensive Benefits Packages + 401(k) Match + Employee Stock Purchase Program + Tuition Reimbursement + Commuter Benefits + Learning & Development opportunities + Strong Inclusion & Diversity initiatives + Company-paid volunteer days **WE'RE CHEMOURS. A DIFFERENT KIND OF CHEMISTRY COMPANY** We are on a journey to create a more colorful, capable, and cleaner world through the power of chemistry. We've completed our transformation and now we're earning our way to growth by advancing higher value chemistry. Built upon a 200-year-old legacy and a world-class product portfolio, we bring everyday convenience to virtually everything people touch-in industries ranging from automotive, paints, and plastics to electronics, construction, energy, and telecommunications. **OUR APPROACH** The "ours" in Chemours is for all of us who work here. We're working together to improve people's lives the world over. **OUR CULTURE** Our culture is built upon our values: Customer Centered, Refreshing Simplicity, Unshakable Integrity, Safety Obsession, and Collective Entrepreneurship. We're honored to be named a _"Great Place to Work-Certified Company"_ for 2018-2019 and a _"2018 Top Workplace"_ by Delaware News Journal. **WHAT SETS US APART** Chemours has the heart and energy of a startup, while being built upon a 200-year old legacy and a world-class product portfolio. A startup with a head start. This mentality drives both our strategy and employees. We believe a thriving workforce culture is essential to our success. We're earning our way to growth by unleashing the power of our talented, experienced, and passionate employees. _Chemours is an equal opportunity employer_ _Chemours is an E-Verify employer_ _Candidates must be able to perform all duties listed with or without accommodation_ _Immigration sponsorship (i.e., H1-B visa, F-1 visa (OPT), TN visa or any other non-immigrant status) is not currently available for this position_ At Chemours, you will find sustainability in our vision, our business and your future. If you want to work on the leading edge of your field and have a desire to make a difference, join Chemours and discover what it means when we say "We Are Living Chemistry". Every day Chemours delivers Trusted Chemistry that enables products and technologies that people rely on to live better and thrive. A global leader in industrial and specialty chemicals, our chemistry enables vital innovations from high-performance computing, artificial intelligence (AI), and advanced electronics to batteries for electric and low-emissions vehicles, climate friendly cooling, paints and durable coatings for advanced infrastructure, and more. Through our three businesses - Thermal & Specialized Solutions, Titanium Technologies, and Advanced Performance Materials - we deliver chemistry-based innovations that solve our customers' biggest challenges. **PLEASE USE A WEB BROWSER OTHER THAN INTERNET EXPLORER IF YOU ENCOUNTER ISSUES (CHROME, FIREFOX, SAFARI, ETC.)**

Equipment Maintenance III Department: Maintenance Division: Operations At Daniel Defense, Only the Best Build the Best… Daniel Defense engineers and manufactures the world's finest weapon systems and accessories. Our mission to honor God and defend Freedom is accomplished by serving customers and providing top-quality solutions to our military, law enforcement, and civilian customers seeking premium firearms for home defense, hunting, and sport shooting. As the Equipment Maintenance III, you will be responsible for the functions outlined below: Essential Functions: Responsible for demonstrating commitment to and leadership of environmental health and safety principles, policies and procedures. Must be able to effectively perform Level II job functions. Conforms to and operates within the framework of all applicable operator work instructions, SOPs, quality, and safety procedures. Participates in required safety toolbox discussions and monthly meetings. Maintain proper housekeeping of work area; Keep all machines, tools, and equipment and work surfaces free of oil, grease, etc. Assist with the organization of, and performing daily maintenance tasks for, the machine tool coolant and scrap metals process Provide support in maintaining 6S signage and marking of equipment, walkways and other locational marking on shop floor. Maintain all manufacturing equipment and machines to include preventative maintenance. Maintain lighting, HVAC filters, painting, plumbing, signage, etc. of company facilities. Record and track maintenance schedules. Observe and test the operation of machinery and equipment in order to diagnose malfunctions, using voltmeters and other testing devices. Perform routine and emergency/unscheduled repairs of CNC production equipment as needed. Overtime and off shift call in may be required. Install, maintain and repair complex machines and tools such as lathes, CNC machines, large special purpose machines, etc. Plan repair procedures, machine and fabricate parts, perform skilled fitting and aligning as required. Construct wooden or metal crates, frames, tables, etc. Work from complicated drawings, machine/equipment manuals and technical specifications. Use a variety of precision measuring instruments for exacting measurements. Work from general assignments and proceed with minimal supervision and directions. Demonstrates strong leadership skills and knowledge. Direct department with assigned tasks in Machine Shop Maintenance Supervisor's absence. Participates in the company's efforts to continuously improve in Safety, 6S, Quality, Delivery and Productivity. Expected to be a contributor to the company standards on high integrity, safety, fair and equitable treatment and a positive work environment Other responsibilities as deemed appropriate or necessary by management. Knowledge, Skills, and Abilities: High school diploma or general education degree (GED); 3+ years of prior maintenance experience or related experience and/or training; or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Apprenticeship or equivalent training plus considerable experience is required to perform work. Advanced mechanical knowledge with the ability to service and repair pumps, motors, shafts, bearings and spindles. May be required to work varying shifts or weekends as needed. Advanced experience using power, pneumatic, hydraulic and hand tools. Advanced experience maintaining and repairing all equipment, to include CNC, servo motors, related controls wiring, programmable controllers, etc. Ability to operate forklifts, man lifts, hand and power tools. Has knowledge of commonly used concepts, practices and procedures within the field. Teamwork and the ability to cooperate and work proactively with others is a must. Intermediate understanding of manufacturing processes. Ability to prioritize responsibilities and work under deadlines and pressure. Proficient at isolating various forms of hazardous energy (electrical, hydraulic, pneumatic, etc.) and safely perform lockout/tag out procedures. Ability to work, interact and effectively communicate with all company officials, employees, vendors, customers, etc. Demonstrated ability to manage multiple projects simultaneously, set priorities, identify and address problems, meet deadlines, and stay within budget. Demonstrated ability to recognize and work in accordance with our Company Values. Physical Requirements: Must be able to lift and carry awkward items weighing up to 50 pounds. Requires intermittent standing, walking, sitting and bending throughout the workday. Must be able to work in a manufacturing environment, to include working in and around machinery, exposure to noise and chemicals, lights/lasers, etc. Must be able to wear appropriate Personal Protection Equipment as required by your position and/or Company policy. Daniel Defense is an EOE AA M/F/Vet/Disability employer and promotes a "Drug-Free Workplace." Note: The statements above are intended to describe the general nature and level of work being performed by those assigned to the job. This list is not intended to be an exhaustive list of responsibilities, duties, and skills required of personnel in this job. Responsibilities are subject to change at the discretion of the employer and do not establish a contract of employment - Daniel Defense is an at-will employer.

Job DescriptionBenefits: Opportunity for advancement Paid time off Training & development DKC Panther Ammunition: Panther Ammunition is a manufacturer specializing in high-quality ammunition products. We are committed to delivering excellence and innovation in every bullet we produce, ensuring optimal performance and safety. Job Summary: As a Production Machine Operator at Panther Ammunition, you will play a crucial role in safely operating various machines and equipment involved in the production process. Your attention to detail and adherence to specifications will contribute to the production of high-quality ammunition. Duties/Responsibilities: - Operate production machinery, including priming, loading, packaging, and similar equipment, according to prints and specifications. - Ensure production of the required quantity of parts within established specifications and tolerances. - Utilize precision tools to measure finished parts, ensuring compliance with function, quality, and cosmetic specifications. - Maintain accurate records of units produced, including identifying and documenting any errors resulting in rejected or discarded pieces. - Inspect equipment before use, performing basic adjustments and routine maintenance as needed. - Maintain a clean, safe, and organized work area. - Perform other related duties as assigned. Required Skills/Abilities: - Experience in operating CNC machinery or other manufacturing equipment - Hands-on proficiency and understanding of machinery operations within a manufacturing environment. - Ability to troubleshoot machinery issues and optimize processes to enhance overall production efficiency. - Ability to follow directions and work effectively in a team environment. - Understanding of and ability to comply with applicable OSHA and environmental regulations. - Proficiency with Microsoft Office Suite or related software. Education and Experience: - High school diploma or equivalent required. - Associate's degree or completion of a related apprenticeship program preferred. - At least one year of related experience is required. - Completion of on-the-job training may be substituted for educational requirements. - Must be fluent in English. Physical Requirements: - Ability to stand for prolonged periods, use tools, and perform repetitive actions involving frequent bending and stooping. - Must be able to lift up to 50 pounds. - Visual acuity is required to read instructions, operate machines, and inspect produced parts. Mandatory Requirements: -Must pass a background check and drug test as per ATF regulations. -Only candidates who agree to these checks should apply. Note: This position may require heavy lifting and physical exertion. Please only apply if you are comfortable with these requirements. We offer competitive pay and opportunities for growth, If you are a motivated individual with a strong work ethic, we would love to hear from you. Equal Opportunity Employer Panther Ammo is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees.

Job Description Heavy Equipment OperatorGrade 13Salary: $40,872.00 ($19.65 hr) - $44,179.20 ($21.24 hr) Supervisor: Travis McLendon - Roads Superintendent PURPOSE OF CLASSIFICATION The purpose of this classification is to operate heavy equipment and perform manual work functions associated with transportation of materials and construction, maintenance and repair of county landfills, roads, bridges, and drainage systems. ESSENTIAL FUNCTIONS The following duties are normal for this position. These are not to be construed as exclusive or all-inclusive. Other duties may be required and assigned. Operates a variety of heavy equipment, machinery and tools used in construction, maintenance and repair of county landfills, roads, bridges, and drainage systems (which may include a compactor, front-end loading truck, motor grader, bulldozer, scraper, asphalt spreader); operates all other equipment, machinery, and tools as assigned. Performs manual work functions associated with construction, maintenance and repair of county landfills, roads, bridges, and drainage systems (which may include constructing/repairing bridges; building/repairing roads; patching holes; rolling/packing asphalt; moving soil/earth; grading roads, shoulders, or other areas; digging holes or trenches; installing pipe; shoveling asphalt, road mix, rock, dirt, etc.; trimming and clearing shrubbery; removing trees and tree limbs; removing debris from ditches and right-of-ways; hauling materials; or loading and unloading trucks). Transports, loads, and unloads various equipment and materials used in projects. Monitors equipment gauges and other indicators for non-standard conditions; reports faulty equipment for repair; performs basic equipment repairs. Performs general maintenance tasks necessary to keep equipment/machinery in good working condition (which includes inspecting equipment, checking condition of tires, checking/replacing fluid levels, greasing equipment, and washing/cleaning equipment). Cleans/maintains grounds and buildings of county facilities as needed; cleans/maintains areas around compactors and trash receptacles. Prepares and/or receives various forms, logs, reports or other documents; processes and forwards as appropriate. Communicates via telephone and/or two-way radio; provides information; takes and relays messages; responds to requests for service. Responds to routine requests for information from employees, officials, the public or other individuals. ADDITIONAL FUNCTIONS May supervise activities of inmates on assigned work details. May provide direction and training to other staff as assigned. Conducts various errands as assigned (e.g., pick up parts or supplies). Performs other related duties as required. KNOWLEDGE, SKILLS, AND ABILITIES Knowledge of the principles, practices, and methods of operating and servicing trucks and heavy construction equipment; knowledge of the traffic laws and regulations governing equipment operation; knowledge of the occupational hazards involved and the safety precautions necessary to the proper operation of varied construction and maintenance equipment; knowledge of departmental functions, organization, and policies; knowledge of basic equipment and vehicle maintenance practices and procedures; and knowledge of the security procedures associated with supervising inmate work details. Skill in operating a variety of trucks and small, medium, and heavy construction equipment; skill in driving; and skill in performing basic equipment and vehicle maintenance tasks. Ability to operate a variety of trucks and small, medium and heavy construction equipment; ability to understand departmental policies, procedures, rules and regulations; ability to understand and follow simple written and oral instructions; ability to communicate effectively both orally and in writing; ability to establish and maintain effective working relationships with employees and the general public; ability to direct the work of inmates and subordinates; ability to perform basic equipment and vehicle maintenance tasks; ability to perform manual work; ability to stoop, kneel, climb, or otherwise physically maneuver with equipment and on work sites; and ability to safely lift and/or carry weights of up to 100 pounds. MINIMUM QUALIFICATIONS Completion of tenth grade level education required; one year of experience in operating heavy equipment and performing manual labor, or a related field; or any equivalent combination of education, training, and experience which provides the requisite knowledge, skills, and abilities for this job. Must possess and maintain a valid Georgia Driver's License. Required to possess and maintain a valid Georgia Commercial Driver's License. MINIMUM REQUIREMENTS TO PERFORM ESSENTIAL JOB FUNCTIONS PHYSICAL REQUIREMENTS: Must be able to operate a variety of machinery, equipment, and tools which may include a dump truck, compactor, front-end loading truck, roll-off truck, flatbed truck, roller, motor grader, backhoe, bulldozer, soil pan, water truck, tractor, wood grinder, bush hog, mower, chain saw, shovel, and mechanic tools. Physical demand requirements are at levels of those for heavy work. DATA COMPREHENSION: Requires the ability to compare and/or judge the readily observable functional, structural, or compositional characteristics (whether similar to or divergent from obvious standards) of data, people, or things which may include forms, reports, blueprints, and reference manuals. INTERPERSONAL COMMUNICATION: Requires the ability to speak with and/or signal people to convey or exchange mechanical and construction-related information, including giving assignments and/or directions to co-workers or assistants as well as communicating with the general public. LANGUAGE ABILITY: Requires ability to read a variety of mechanical and construction-related documentation, directions, instructions, and methods and procedures. Requires the ability to complete forms and to write basic job-related documentation with proper format, punctuation, spelling and grammar, using all parts of speech. Requires the ability to speak with and before others with poise, voice control, and confidence using correct English and well-modulated voice. INTELLIGENCE: Requires the ability to learn and understand basic mechanical and construction-related principles and techniques; to understand departmental policies and procedures; to make independent judgments in absence of supervision; and to acquire and be able to expound on knowledge of topics related to primary occupation. VERBAL APTITUDE: Requires the ability to record and deliver information, to explain procedures, and to follow verbal and written instructions. NUMERICAL APTITUDE: Requires the ability to add and subtract totals; multiply and divide totals; and determine time and weight. FORM/SPATIAL APTITUDE: Requires the ability to visually inspect items for proper length, width, and shape using job related equipment. MOTOR COORDINATION: Requires the ability to coordinate hands and eyes in using job related machinery and equipment and to operate motor vehicles. MANUAL DEXTERITY: Requires the ability to handle a variety of items, machinery and equipment, control knobs, switches, etc. Must have the ability to use one hand for twisting motion or turning motion while coordinating other hand with different activities. Must have average levels of eye/hand/foot coordination. COLOR DIFFERENTIATION: Requires the ability to discern color. INTERPERSONAL TEMPERAMENT: Requires the ability to deal with and relate to people beyond giving and receiving instructions. Must be able to adapt to and perform under moderate stress when confronted with an emergency. PHYSICAL COMMUNICATION: Requires the ability to talk, express, or exchange ideas by means of spoken words and/or hear and perceive nature of sounds by ear.

Full-time Description As the Southeast's premier site development and environmental construction contractor, CBP Environmental, takes pride in the reputation for excellence we've earned over the past three decades where our integrity is matched only by our skill set. We are seeking to add heavy equipment operators to our team to work on heavy civil construction projects with our valued customers in the environmental construction sector. CBP Environmental offers unparalleled professional growth opportunities and an outstanding compensation and benefits package that includes full health care coverage including dental and vision plans, 401k plan with generous company match, along with paid vacation and holidays. Salary is based upon experience. Position Responsibilities: Operate all heavy equipment in a safe and efficient way according to all relevant policies and procedures. Perform daily safety and maintenance checks. Clean heavy equipment as scheduled and/or required. Ensure heavy equipment is safely and securely stored. Advise Management of any requirements for maintenance or repairs. Participate in routine maintenance. Practice workplace safety. CBP Environmental, Inc. is a drug-free company and an equal opportunity employer. All applicants are required to submit and pass a background screening, physical, and E-Verify Check. Requirements 1+ years' experience in Heavy Earthmoving Equipment Operations (i.e. excavators, dozers, articulated trucks, etc.), or the equivalent in training preferred. Knowledge of safe & productive operation of heavy equipment. Must have and maintain a valid driver's license. Successful completion of pre-employment drug & alcohol and medical/physical capability requirements. Successful criminal background screen may be required. Ability to be a team leader in all safety aspects of the position. Position will require travel and possible weekend work. Must be willing to work over-time. Required Education: High School or equivalent.

Anderson Columbia Co., Inc. - Accepting resumes for Heavy Equipment Operators. Since 1958, Anderson Columbia has been an industry leader in paving and road building, making smooth stomping grounds for vehicles of all kinds. We strive to construct roads from the highest quality materials and apply ourselves to ensure the job is done right. From small backstreets to congested highways, we perform jobs of all proportions and create pavement in a way that makes the ride enjoyable. We pride ourselves on being one of the Largest Construction & Aggregate Producing Contractors in Florida. Our sense of professionalism paired with our teams of highly-trained personnel allows us to be successful at every job we employ. Anderson Columbia doesn't just hire employees into a company, we hire people into our family; after all, people are our greatest asset. If you appreciate the feeling of sweat on your forehead, the sense of accomplishment at the end of a long day, or the pride in calloused hands, Anderson Columbia may have a place for you. Monday - Friday ( Some Saturdays ) Full Time Postion Pay rate - $15 / HR DOE** Requirements Must maintain reliable attendance and transportation; Meet company safety and performance standards. Must be able to travel a 45 minute radius of Madison, depending on the project. The duties can change daily depending on the project and weather. Must pass pre-employment heavy demand physical & drug test. Benefits 401K Match Medical Dental Vision DFW / EOE Disclaimer The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed.