Inspector jobs in Fall River, MA - 170 jobs

GIS Field Services, Inc. has been in the mortgage field inspection industry for over 20 years and is based out of Dallas, TX. We are looking to hire Mortgage Occupancy Field Inspectors to perform residential property inspections on behalf of mortgage lenders. Our independent contractors enjoy a flexible schedule while earning weekly pay. Please visit our website to learn more about us and the industry. ************************ Job Title:Mortgage Occupancy Field Inspector County Coverage: Dukes and Nantucket Mortgage Property Inspection Overview: Mortgage lenders require periodic updates on the properties they have financial interest in. The lender contracts with GIS to have inspectors go out to verify the property occupancy, report general property conditions, letter delivery/posting, vacant interior walk-through or insurance repair progress report. Majority of our inspections are basic exteriors where some do require contact by door knock or letter delivery. In addition, there will be some inspections which require interior access to secured/vacant properties and appointment-based insurance loss inspections. Job Responsibilities: Requires being able to spend extended periods of time driving Efficient time management to route and complete inspections with an estimated 3-5 day turnaround time (this can vary) in your agreed territory Make a determination of occupancy based on industry standards and report general property conditions Using a mobile app, InspectorADE, to obtain all photographs, comments, and form documentation Consistent communication with your inspection manager via text, email and phone Requirements: Experience preferred, not required Complete a background check using a valid driver's license to obtain a Shield ID (Aspen Grove ABC#) - If onboarded with GIS, we will provide you the link to obtain your Shield ID Computer and internet connection Vehicle with good gas mileage iPhone or Android Printer Volt Stick Set of 11 Hud Keys (Inspector Keys) - If onboarded with GIS, we will provide a link with a discount code to obtain your Hud Keys Daylight availability Office supplies (paper, envelopes, ink) Pay: Set rate per inspection ($15-$20 per hour based on location and the number of inspections performed) Payment - inspections are paid out every Friday for work completed and approved the prior week by direct deposit This is a 1099 Independent Contractor position

Job Title: Receiving Inspector Shift 1st Shift: 8:30 AM - 5:00 PM 2nd Shift: 12:30 PM - 9:00 PM Days: Monday - Friday Pay Rate: $19.10/hour Employment Type: Temp-to-Perm Job Summary The Receiving Inspector is responsible for inspecting incoming and returned medical devices to ensure they meet quality, regulatory, and documentation standards. This role includes verifying sterility, temperature conditions, labeling, and required paperwork before products are placed into inventory. The position requires accurate data entry to track inspection status and working in a regulated warehouse environment. SAP and WMS Manhattan systems training provided. Candidates must be able to lift up to 40 lbs and pass a background check and drug screening (including marijuana). Department Openings Returns Department - 2 Openings Process and inspect returned products only Perform accurate data entry and system documentation Use pallet jacks as needed (experience preferred; training provided) Maintain strong attention to detail and organization Complaints Department - 1 Opening Inspect used medical devices returned from hospital surgery departments Comfort with handling open/used products, including exposure to blood, is highly desirable Must be comfortable working around blood Prepare and send clear, professional written communications regarding inspection findings What You'll Need High school diploma or equivalent experience Good computer skills and data entry Strong attention to detail and organizational skills Good written and verbal communication skills Ability to lift up to 40 lbs Previous experience in inspection, quality control, or a regulated environment is a plus Pay Details: $19.10 per hour Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, EAP program, commuter benefits and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable. Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: The California Fair Chance Act Los Angeles City Fair Chance Ordinance Los Angeles County Fair Chance Ordinance for Employers San Francisco Fair Chance Ordinance Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

We are seeking a Quality Control Inspector with experience in conducting first article inspection processes to ensure the quality of finished products. The ideal candidate will have some prior experience with FAI, knowledge of quality assurance techniques, and the ability to interpret engineering drawings and technical documents. Responsibilities: Assist in Conducting First Article inspection (AS9102) processes and document activities Interpret test results for acceptance or rejection Record test results and compile nonconforming output report Mechanical Inspection Electrical Point to Point wiring continuity testing Maintain calibration logs Qualifications: Minimum experience with first article inspection processes (Will Train) Knowledge of quality assurance techniques and functions Previous experience with calipers and micrometers Ability to read and interpret engineering drawings, specs, and other technical documents Mechanical aptitude Excellent communication skills both verbally and in writing

Busek Co. Inc. (************** research, develops, and produces spacecraft subsystem technologies for space missions. Our talented staff possess expertise in in-space propulsion, space-borne sensors, materials science, manufacturing, and high-fidelity electronic design for challenging space missions. Busek is recognized in the spacecraft on-orbit propulsion community for numerous achievements, including developing the first U.S. Hall Effect Thruster in space. Our efforts span research, development, and manufacturing of aerospace systems, with low-volume production of high-reliability in-space components and subsystems. Our facilities include over 30,000 sq. ft. of R&D labs and more than 40 vacuum chambers. Founded in 1985, Busek is located in Natick, MA, approximately 20 miles west of Boston. For more information, visit ************** Summary: As a Quality Assurance (QA) Inspector - Receiving, you will play a critical role in ensuring the quality of incoming and in-process parts and components. You will work closely with design and test engineers, manufacturing staff, and fabrication technicians (both internal and external) to verify compliance with Busek's documentation and customer requirements. This role provides a direct contribution to spaceflight programs, including groundbreaking NASA, commercial space, and defense missions. How you will make an impact: Conduct inspections of incoming and in-process components per documentation requirements. Interpret engineering blueprints, specifications, and drawings. Operate and utilize various inspection tools and gauges to verify part quality. Maintain accurate inspection records and documentation. Adhere to GD&T (Geometric Dimensioning and Tolerancing) principles and processes. Coordinate inspection efforts with coworkers to ensure workflow efficiency and quality compliance. Desired Skills: Prior experience in a technical QA parts inspection role. Previous work experience in quality control or related field. Proficiency in Microsoft Office Suite (Word, Excel). Knowledge of AS9100 or ISO 9001 standards is a plus. Experience working with small precision components. The expected salary range for this position is $52,000 - $79,000. Actual compensation will be determined by the candidate's experience, education, and alignment with organizational needs. Additional Information: To conform to U.S. Government regulations, applicants must be a U.S. citizen, lawful permanent resident of the U.S., or a protected individual as defined by 8 U.S.C. 1324b(a)(3). Benefits: Competitive Salary SEP Retirement Savings Performance Bonuses Medical, Dental, and Vision Insurance Life Insurance Long-Term / Short-Term Disability Coverage Paid Vacation, Sick Leave, and Holidays Education Assistance To comply with U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), employment at Busek requires that applicants be one of the following: A U.S. citizen A lawful U.S. permanent resident (i.e., current Green Card holder) A refugee or an individual granted asylum in the U.S. Or be eligible to receive the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable For more information about ITAR regulations, visit this resource. Article - DDTC Public Portal

Summary: The Lead Housing Quality Standard (HQS) Inspector is responsible for conducting any mandatory inspection for all leased units under the Rental Assistance Program in accordance to the Department of Housing and Urban Development (HUD) and Department of Housing and Community Development (DHCD) program guidance. As the Lead HQS Inspector the incumbent is expected to assist the Inspections' Supervisor in providing training to newly hired inspectors and with administrative duties as assigned. Why Work for SMOC? Paid Time Off: All full-time employees can accrue up to 3 weeks of vacation, and 2 weeks of sick time and are eligible for 12 paid holidays during their first year of employment. Employer-paid Life Insurance & AD&D and Long-Term Disability for full-time employees. Comprehensive Benefits Package including Medical Plans through Mass General Brigham with an HRA Employer cost-sharing program, Dental Plans with Orthodontic Coverage, and EyeMed Vision Insurance available to full-time employees. 403(B) Retirement Plan with a company match starting on day one for all full-time and part-time employees. Additional voluntary benefits including; Term and Whole Life Insurance, Accident Insurance, Critical Illness, Hospital indemnity, and Short-Term Disability. Flexible Spending Accounts, Dependent Care Accounts, Employee Assistance Program, Tuition Reimbursement and more. Primary Responsibilities: Conduct thorough HUD/DHCD HQS inspections of all SMOC RAPS existing units, potential new units, and the reinspection of those units as required including physical and remote virtual inspections. Verify unit compliance based on health and safety requirements. Verify unit conditions for rent reasonableness comparisons. Enter all inspection data into the MRI Tenmast Software Systems' Inspection module and monitoring information as needed; printing all required inspection-related letters for participating tenants and owners. Assist the Inspection Supervisor in providing "on the job" training for newly hired HQS inspectors in the field Assist the Inspection Supervisor in monitoring the various types of inspections conducted by the HQS Inspection team including remote virtual inspections, re-inspections, inspections conducted using an owner self certification and physical inspections Make recommendations to the Inspection Supervisor on behalf of the HQS inspectors on process and procedure Monitor HQS supplies and make requests to the Program Director on orders for necessary equipment such as gloves, shoe coverings and personal protective equipment as needed Utilize and maintain inspection-related equipment on a regular basis, including camera, hand-held inspection devices or tablets, flashlight, cell phone, tick tester, and inspection-supply cache. Engage all clients by understanding and addressing their needs whether within or outside the scope of work. Attend & participate in engagement team meetings as requested and communicate effectively with clients and staff in other areas. Maintain confidentiality of client, employee and agency information in accordance with federal and state laws and funder requirements. Ensure compliance with program/department, agency and/or funder requirements, as well as SMOC policies & procedures. Other duties as assigned. Knowledge and Skill Requirements: Education: High school diploma or equivalent Minimum years of related experience: 1-2 years preferred Knowledge of Excel, Windows, Word and PCs, ability to work well in a very high volume and productivity environment, ability to handle potentially stressful situations and sensitivity to the needs of economically- disadvantaged clientele. Valid Mass. driver's license and insurance Mobility to use office machines, sitting, standing, ability to lift archive boxes filled with files. Must meet all required DHCD program certifications within 1 year. Organizational Relationship: Directly reports to HQS Inspection Supervisor. Indirectly reports to Program Director, Assistant Director and Division Director. Direct reports of this position are none. Indirect reports of this position are HQS Inspectors. Physical Requirement: Physical effort required to do the job: Mobility to use office machines, sitting, standing, ability to lift archive boxes filled with files. Working Conditions: This job requires working in many different conditions and places. About 80% of the time is outside the office either on the road or at a tenant's unit. Therefore, conditions range from an office environment to an outdoor environment that can be dirty, wet, cold, hot, difficult and risky. As part of the responsibilities of this position, the Lead Inspector will have direct or incidental contact with clients served by SMOC in various programs funded or administered through the Executive Office of Health and Human Services. A successful background check is required.

IN THIS ROLE, YOUR RESPONSIBILITIES WILL BE: Plan and perform a sequence of operations for inspection using all types of measuring apparatus such as micrometers, verniers, height and depth gages, sine plate, trammels, optical comparator, moly test kit, air gages, etc. Perform first piece, part, bench and periodic inspection as necessary within the limit of standard practice. Determine reasons for defects or malfunctions and effect of deviation on product requirements. Makes dimensional, mechanical and visual inspection of assemblies, sub-assemblies, finished and semi-finished components and parts for size, correct material, finished appearance and other pertinent requirements. Devise dimensional gaging set ups, do part layout inspection, make out report and rejection slips and record data to Crosby specifications. Will qualify as Level II for liquid penetrant, magnetic particle, ultrasonic and PMI inspections and inspection operations to the requirements of Crosby's qualification programs. Perform PMI programming and maintenance and calibration of all precision tools, gages and equipment under calibration control. Ability to follow and implement special quality instructions and procedures. Accompany customer inspectors visiting the plant for review of inspection requirements, pertinent records and testing of customer products. Refer all unusual or critical cases to supervisor for inspection. WHO YOU ARE: You are an experienced inspector who understands the importance of learning and following the guidelines required to produce quality work. FOR THIS ROLE, YOU WILL NEED: High School diploma, or equivalent 1-2 years working in a Quality Inspection role in a manufacturing environment Experience using a variety of measuring tools such as micrometers, verniers, height and depth gages, moly test kit, etc.. PREFERRED QUALIFICATIONS THAT SET YOU APART: Experience in training and/or execution of NDT including liquid penetrant, magnetic particle, ultrasonic and PMI inspections . Our Location: Mansfield, Massachusetts, offers the charm of a suburban community with the convenience of a prime location in southeastern Massachusetts. Known for its excellent schools and family -friendly atmosphere, Mansfield provides easy access to both Boston and Providence via major highways and a commuter rail station. Residents enjoy a variety of recreational opportunities, including local parks, sports fields, and trails, as well as vibrant community events and concerts at the Xfinity Center, a popular outdoor entertainment venue, as well as proximity to Patriot Place! With its strong sense of community and convenient amenities, Mansfield is an ideal place to call home! Our Culture and Commitment to You: At Emerson, we prioritize a workplace where every employee is valued, respected, and empowered to grow. We foster an environment that encourages innovation, collaboration, and diverse perspectives-because we know that great ideas come from great teams. Our commitment to ongoing career development and growing can inclusive culture ensures you have the support to thrive. Whether through mentorship, training, or leadership opportunities, we invest in your success so you can make a lasting impact. We believe diverse teams working together are key to driving growth and delivering business results. We recognize the importance of employee wellbeing. We prioritize providing flexible, competitive benefits plans to meet your family's physical, mental, and financial, and social needs. We provide a variety of medical insurance plans, with dental and vision coverage, Employee Assistance Program, 401(k), tuition reimbursement, employee resource groups, recognition, and much more. Our culture offers flexible time off plans, including paid parental leave (maternal and paternal), vacation and holiday leave.

The Panther Group is seeking a Quality Inspector to support inspection activities throughout the production assembly process, from in-process inspection through final system assembly. This role is open to both entry-level and experienced candidates, with training provided for those new to quality inspection. 1st shift (for Quality Inspector 1) Mon-Fri, 6am-2:30pm. 2nd shift (for Quality Inspector 2) Mon-Fri, 2:30pm-10:30pm. or 3:30pm - midnight. Essential Duties & Responsibilities Perform in-process, first article, and final inspections throughout manufacturing Verify products meet workmanship, process, documentation, and customer requirements Follow ESD and board handling requirements Handle Moisture Sensitive Devices (MSD) per component MSL requirements Review documentation for compliance with internal procedures Disposition assemblies for rework or repair as needed Authorize shipment of product that meets industry and customer specifications Use inspection tools such as calipers, rulers, microscopes, and gauges Support ISO Quality Management Systems and site 6S objectives Accurately record inspection results in the electronic manufacturing system Support one or multiple product lines based on experience level Perform other related duties as assigned Qualifications Required: High School Diploma or GED Pass IPC-DVD-64C Component Identification. Pass IPC-A-610 Modules, 1, 2, 3, 4, 5, 6, 7 & 8. Ability to read assembly drawings, blueprints, and Bills of Materials Familiarity with First Piece, In-Process, Audit, and Final Inspection Knowledge of ESD and electronic assembly environments Ability to use Inspection Gauge (Calipers, Rulers, Microscope, etc.) Ability to use electronic manufacturing system (OCuity) Ability to use Microsoft Office tools like Excel and Word as well as shop floor control systems (Aegis). Ability to work in a team-oriented manufacturing environment Strong attention to detail and sense of urgency Comfortable performing repetitive inspection tasks Ability to follow written procedures and instructions Preferred (training may be provided): IPC-A-610 and IPC-DVD-64C certifications Experience Levels Entry-Level: 0-6 months manufacturing or inspection experience Experienced: 2+ years of quality inspection or related technical experience Technical or vocational certification may substitute for experience Pay is $20 - $28 / hour depending on experience and shift. #INDENG #ZR

The Town of Halifax is now accepting applications for the position of Animal Inspector. This position is responsible for inspecting all farm animals and the premises where such animals are kept and deals with quarantines of animals including cats and dogs, in addition to other duties such as quarantines of animals with a contagious disease. This is a part-time, as needed and on-call, non-union position and is not eligible for benefits. As a condition of employment, the successful candidate must complete and pass a background check (CORI). Pay rate: $290.75 per month (Stipend) Application, resume, and any associated documents must be submitted online no later than Friday, December 12th, 2025. The Town of Halifax is an equal opportunity employer. Download Job Description (PDF)

Inspection of product in the production assembly process through final system assembly. Essential Duties and Responsibilities: Adhere to all ESD requirements and Board Handling. Use of Moisture Sensitive Device (MSD) handling requirements based on component moisture sensitive levels (MSL). Verify product compliance to workmanship standards. Verify process compliance to procedures. Verify documentation compliance to document control process/procedure. Verify product complies with customer requirements. Perform 1 st piece inspections of products as required through out the manufacturing process. Ability to perform the necessary tasks of In Process Inspection. Disposition of assemblies for rework and repair. Authorization of shipment of product that meets industry and customer specifications. Support and follow all ISO standards related to OnCore's various Quality Management Systems. These systems may include, but are not limited to, quality, the environment, health, safety and security. Support all corporate and site 6S objectives. Perform all other duties, as assigned. Qualifications Job knowledge, Skills & Abilities: Ability to utilize electronic manufacturing system (OCuity). Pass IPC-DVD-64C Component Identification. Pass IPC-A-610 Modules, 1, 2, 3, 4, 5, 6, 7 & 8. High sense of urgency and attention to detail. Ability to successfully participate in a team environment. Ability to read blueprints. Assembly drawings, customer Bills of Materials. Familiarity with First Piece, In Process, Audit, and Final Quality Control Inspection Procedure. Ability to use Inspection Gauge (Calipers, Rulers, Microscope, etc). Monitor processes, materials, or surroundings. Ability to work on single task / procedures / products. Highly repetitive or routine duties, Ability to support 1-2 product lines / customer(s) Normally receives detailed instructions on work Works under close supervision Experience/Education: High School Diploma or GED. 0-6 months previous experience Due to ITAR and/ or CUI compliance, this position requires candidates to be a U.S. Citizen, Permanent Resident Alien, or Protected Individual per 8 U.S.C.1324b(a)(3)”. Benefits Offered: Comprehensive benefit package including medical, dental and vision coverage; company-paid basic life/AD&D insurance, short-term and long-term disability insurance; voluntary supplemental insurances, flexible spending accounts and employee assistance program (EAP). Sick Leave, Vacation Time, and company-paid Holidays are also provided as paid time off. NEOTech also provides a 401(k) Retirement Savings Plan option with a company match. NEOTech is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex including sexual orientation and gender identity, national origin, disability, protected Veteran status, or any other characteristic protected by applicable federal, state, or local law. NEOTech has a long-standing commitment to maintaining a safe, quality-oriented and productive work environment. We also want all employees to perform their duties safely and efficiently, in a manner that protects their interests and those of their co-workers. We recognize that alcohol and drug abuse pose a threat to the health and safety of NEOTech employees and to the security of the Company's equipment and facilities. For these reasons, NEOTech is committed to the elimination of drug and alcohol use and abuse in the workplace. Candidates being considered for hire must pass a pre-employment background check and drug test which include screening for illegal drugs and marijuana.

Malden, MA, US Pursuit Aerospace is the largest privately held aerospace manufacturers in the world. We are a global manufacturer of complex aircraft engine components that are developed through highly integrated processes. Our exceptional quality is driven by a deep investment in and the daily practice of continually improving our people, processes, and products. We have grown through our relentless focus on developing single piece flow lines and our ability to do Kaizen. Kaizen means change for the betterment of others and is a structured way of improving processes to deliver the best quality parts in the world to our customers. At Pursuit, you are joining a best in the world manufacturing team, and we will teach you The Pursuit Way. We're looking for an experienced Quality Inspector for 1st and 2nd Shifts. You will have the opportunity to work with an experience and highly motivated team. At Pursuit Aerospace, we are committed to fostering a diverse and inclusive workplace environment. As an aerospace company with defense contracts, we adhere to strict regulatory requirements, including those related to security and compliance. Therefore, we prioritize hiring individuals who are U.S. citizens or lawful permanent residents (green card holders) to ensure alignment with our contractual obligations. We welcome applications from all qualified candidates who share our dedication to excellence and uphold the values of integrity, innovation, and teamwork. Essential Duties and Responsibilities: Inspection & Quality Assurance: Conduct detailed inspections of engine parts using precision measurement tools. Review specifications and blueprints to ensure compliance with aerospace standards. Identify and disposition non-conforming parts. Documentation & Reporting: Maintain accurate records of inspection results, measurement data, and non-conformance reports. Prepare and submit First Article Inspection (FAI) packages and special process documentation. Collaboration: Work closely with engineering and production teams to address quality concerns and implement corrective actions. Collaborate with other inspectors to share best practices and improve inspection methods. Continuous Improvement: Actively participate in continuous improvement initiatives by identifying areas for process enhancement and optimizing inspection techniques. Training Support: Assist in training new team members on inspection protocols, quality standards, and the use of measurement equipment. Compliance: Ensure adherence to safety protocols, quality regulations, and company policies throughout all inspection activities. Problem-Solving: Utilize root cause analysis and problem-solving techniques to address quality issues, implementing effective preventive measures. Qualifications: Skills: Teamwork and Initiative: Ability to work independently and collaboratively within a team environment. Communication and Organization: Excellent communication and organizational skills, with attention to detail. Flexibility: Adaptability to meet changing business needs and priorities. Technical Expertise: Proficient in Aerospace standards, able to interpret blueprint requirements, and GD&T principles. Mentoring: Demonstrated mentoring skills with the ability to develop others in quality-related processes and techniques. Continuous Improvement: Commitment to implementing and developing business improvement initiatives within the Quality department, which may include developing procedures for inspectors and providing training. Interpersonal and Troubleshooting Skills: Excellent interpersonal skills and adept at troubleshooting quality issues. Required Qualifications Must be authorized to work in the U.S. on a full-time basis without sponsorship now or in the future. The Company cannot offer employment to visa holders who require employer sponsorship in the future or cannot work now on a full-time basis. Must be able to perform work subject to ITAR/EAR regulations. Education and/or Experience: High School diploma or equivalent required. 3+ years of experience in quality inspection, preferably within the aerospace sector. Experience with reading and interpreting blueprints and technical drawings. Familiarity with manual layout inspection techniques, CMM inspections, and machining processes such as turning and milling. Experience in aerospace is advantageous. Proficiency in English language, both verbal and written. Mechanical aptitude and ability to interpret blueprints and sketches accurately. Pre-Employment Screening: As a federal contractor in the defense industry, Pursuit Aerospace is subject to federal regulations. All offers of employment are contingent upon successful completion of background checks, drug and alcohol screening, and employment eligibility verification. At Pursuit Aerospace we dream big, get stuff done and like to have fun! Full time position with benefits including Medical, Dental, Vision, Life Insurance, 401K with an Employer Match and more! Pursuit Aerospace is an equal opportunity employer committed to the principles of non-discrimination in the workplace. Candidates will not be discriminated against on the basis of age, race, creed, color, religion, sex, sexual orientation, national origin, disability, marital status, or any other basis prohibited by federal, state, or local law. Pursuit Aerospace has an anti-hate policy in place, along with strong company culture of Diversity, Equity, Inclusion and Belonging. ******************* Always Pursuing Better

Full-time Description Department: Quality Supervisor: Quality Assurance Manager Hourly Rate Range: Hourly rate will be commensurate with experience Schedule: M-F, 40 hours/ week- OT as required Education Requirements: High School Diploma or GED Years of Experience: 3 years related experience Position Summary: Quality technician I will perform inspections, tests, and measurements to ensure that products consistently meet both internal and external quality standards throughout the production process. Your attention to detail and strict adherence to procedures will support continuous improvement in manufacturing operations. You will collaborate closely with the production team to ensure all outputs meet company and industry standards, while contributing to our ISO?9001 and AS9100 certification compliance efforts. Key Responsibilities: · Conduct visual, dimensional, and functional inspections on raw materials, in-process components, and finished products according to established protocols. · Use precision measurement tools (e.g., calipers, micrometers, gauges) and equipment (e.g., CMM) to verify product specifications. · Perform routine sampling, testing, and record results in the quality management system (QMS). · Identify non-conforming items, quarantine defects, and initiate corrective actions in collaboration with production teams. · Assist in root cause analysis, corrective/preventive action (CAPA) investigations, and implement improvements. · Maintain calibration schedules and ensure inspection equipment is in good operating condition. · Generate quality reports and provide feedback to production and engineering teams. Requirements Qualifications: · High school diploma or equivalent; Associate degree or technical certification in quality assurance, manufacturing, or related field preferred. · 1-3 years of experience in quality control or inspection, preferably in manufacturing engineering, process improvement, or industrial engineering. · Proficient with precision measurement instruments and quality inspection tools. · Working knowledge of statistical process control (SPC) and root cause analysis methods. · Familiarity with quality management systems ISO 9001 / AS9100. · Knowledge of root cause analysis techniques (5 Whys, Fishbone, FMEA). · Strong background in lean manufacturing, Six Sigma, and continuous improvement methodologies. · Strong attention to detail and problem-solving abilities. · Effective verbal and written communication skills. · Ability to work independently and collaboratively in a fast-paced environment. · Basic computer skills; experience with QMS software and MS Office. Preferred Qualifications: · Certified Quality Inspector (CQI) or ASQ certification. · GxP/GMP training. · Six Sigma Green Belt (Or Above) Key Performance Indicators (KPIs) 1. First Pass Yield - Percentage of products that pass quality inspection without rework. 2. Inspection Coverage: - Percentage of products/components inspected according to defined sampling plan. 3. Measurement Accuracy - Percentage of measurements and tests recorded correctly in the QMS. 4. Procedure Adherence Rate - Percentage of inspections performed according to standard operating procedures (SOPs). 5. Data Accuracy - Accuracy of recorded inspection and testing data in QMS. Benefits: 401(k) 401(k) matching Dental insurance Flexible spending account Health insurance Life insurance Paid time off Professional development assistance ITAR COMPLIANCE This position requires access to or use of information which is subject to the federal International Traffic in Arms Regulations (ITAR). All applicants for this position must be U.S. Persons within the meaning of ITAR. ITAR defines "U.S. Person" as U.S. citizen, lawful permanent resident of the U.S., person admitted as a refugee to the U.S., person granted asylum in the U.S., or person granted the status of alien lawfully admitted for temporary residence to the U.S. under 8 U.S.C. §1160(a) (for special agricultural workers) or 8 U.S.C. §1255(a)(1) (an amnesty program).

Position: Final Inspector Shift: 1st Hours: 7:00am-3:30pm Type: Full-Time Mode: Temp to Hire Industry: Manufacturing Our client is looking for a responsible Final Inspector this is a Temp to Hire position with our key manufacturing client. To be considered for this role, you will need 3+ years of experience as Inspector ; Aerospace experience preferred. Core Responsibilities: Conduct first piece inspections as required. Plan and perform inspections to check dimensions and dimensional relationships on a variety of complicated first piece run part, gauges, tools and fixtures. Verify correct operation sheet is being used and confirm that it meets blueprint requirements. Use CMMs optical comparators, sine plates, indicators, micrometers, V-Blocks, verniers, parallels, height stands, and cadillacs, etc. Return part to operator and ensure proper gauging and inspection equipment. Complete paperwork and documentation of dimensions. Perform all other similar and/or related duties as required and /or directed Performs other duties as assigned. Requirements Minimum of three (3) years of experience in Inspection of complex aerospace parts and PC-DMIS experience preferred. Ability to interpret customer specifications, blueprints, and operation sheets. Must be able to work overtime as needed, have strong math and communication skills and be able to keep accurate records. Knowledge and use of precision measuring equipment and must perform objectives using quality tools and methods and maintain inspection files. Should exhibit the highest standards of ethical conduct and strive to increase the quality of the product. Education Requirements: High school diploma/GED equivalent BestLogic Staffing (BLS) is a Top Staffing Firm thats partnered with some of the largest names in various industries. Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore! Learn about our Process or to speak to a Recruiting Professional directly, call 1-866-585-8055. BestLogic Staffing is an equal opportunity

We are a growing manufacturing company looking for an individual to assist or lead our quality control department Requirements A qualified individual would: Be able to read and interpret drawings. Understand GD&T. Understand a variety of sampling plans. Utilize best practice inspection methods to ensure product conforms to customer and drawing specifications. Be familiar with and able to use a variety of inspection tooling (micrometers, calipers, CMM, indicators, optical comparator, etc). Have good computer skills (Microsoft Office, Outlook, be able to learn a robust ERP system). Be familiar with completing first article inspections per AS9102 and complete utilizing specialized software. Have a good organizational skill set as each customer has a different set of requirements that are critical to product acceptance. Be familiar with the requirements of ISO9001. Attention to detail is critical. FULL TIME EMPLOYEE BENEFITS: Competitive compensation based on experience BCBS Medical, Altus Dental and Vision, Disability and Life Insurance - 100% Company Paid. Paid personal and vacation time (PTO) 10+ Paid holidays 401K plan Potential for Growth OT based on business conditions COMPANY: Bendon Gear is a precision machine and gear company doing business for over 40 years, with a stable set of excellent customers. We are a good, solid company, and we wish to build a team of good people who are motivated, flexible, and capable. Job Types: Full-time, Part-time Salary: $18.00 - $27.00 per hour Benefits: 401(k) Dental insurance Health insurance Life insurance Paid time off Professional development assistance Vision insurance Schedule: 10 hour shift 8 hour shift Monday to Friday Salary Description $18 - 27.00 / Hr

The Quality Control Technician - Troubleshooting is responsible for inspecting and testing cable and wire products and processes to ensure they meet all quality standards, specifications, and regulations. This includes performing visual inspections, dimensional measurements, electrical, and functional tests. The primary function of this role is to evaluate nonconforming products and to determine the necessary actions to rework the product. The QC Technician must also be able to read and interpret blueprints, engineering drawings, and specifications. This position requires the use of High Voltage, all safety guidelines, procedures, and regulations to prevent accidents and ensure a safe working environment must be followed. The Quality Control Technician - Troubleshooting is a respectful team-player that works well with diverse internal team members. This position is ambitious, self-motivated, results-driven, and demonstrates problem solving skills with sound judgment. This role is also responsive, flexible, accessible, detail oriented, willing to embrace change and proactively adjust plans. Partnering with and elevating others by communicating with peers to increase awareness and ensure team success. Essential Duties and Responsibilities: Troubleshoot nonconforming cables, fill out nonconformance reports and communicates findings to Production Quality Supervisor and Quality Manager Detect and report unusual or non-conforming documentation, materials, conditions, or product to Production Quality Supervisor and Quality Manager. Assist and sometimes lead Root Cause and Corrective Action efforts. Inspect materials, components, and final product to ensure they meet quality standards. Measure dimensions of cable and wire products to ensure they meet specifications. Conduct visual and electrical tests on cable and wire products to ensure they meet performance requirements and identify any defects. When required, perform functional tests on cable and wire products to ensure they operate as designed. Document the results of all tests and inspections. Create, update, compile, save and maintain documentation into internal database. Work with various internal personnel and departments to communicate and resolve quality issues. Comply and support company policies and quality management system. Maintain and create a clean, uncluttered environment that reduces waste and optimizes productivity by following the 5S steps: sort, set in order, shine, standardize, and sustain. When required, help with continuous improvement efforts. More additional responsibilities may be applicable per the Quality Manager. Qualifications: High school diploma or equivalent. 1+ year of experience in quality control, preferably in the cable and wire manufacturing industry. Experience with visual inspection and dimensional measurement. Basic understanding of Microsoft Office and Adobe. Ability to read and interpret blueprints, engineering drawings, and specifications. Strong attention to detail. Ability to work independently and as part of a team. Strong communication skills. Proficient with computers and comfortable using Microsoft Office Suite (Word, Excel, etc.). Physical Qualifications: The physical demands described are representative of those that must be met by an employee to successfully perform the essential function of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is regularly required to sit; stand; crouch; stoop; walk; talk; hear; use hands to handle or feel assemblies; reach with hands and arms for materials and tools. The employee must occasionally lift and/or move up to twenty-five (25) pounds. They must also have the ability to see details at close range (within a few feet of the observer), color vision, depth perception and ability to focus. This position requires use of information or access to hardware and documents which are subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee. Benefit Conditions: Waiting period may apply Only full-time employees are eligible This Job Is: A job for which military experienced candidates are encouraged to apply Job Type: Full-time Salary: $20.00 - $25.00 per hour Benefits: 401(k) Dental insurance Health insurance Paid time off Vision insurance Experience level: 1 year Schedule: 8 hour shift Day shift Monday to Friday Overtime Work setting: In-person Experience: Blueprint reading: 1 year (Required) Quality control: 2 years (Preferred) Work Location: In person

Job DescriptionDare Commercial Services is looking for an experienced individual to do a once yearly site inspection at a commercial site for a client in Stoughton, MA. You will be using a state of the art inspection app. You will be looking for maintenance related issues such as potholes, graffiti and debris among other issues. Must own a iOS tablet or smart phone. An inspection takes about 30 minutes. Requirements: own a smart phone or tablet ability to be consistent reliable transportation Dare Commercial Services is an equal opportunity employer that makes employment decisions without regard to race, national origin, religion, age, color, sex, sexual orientation, gender identity, disability, or protected veteran status, or any other characteristic protected by local, state, or federal laws, rules, or regulations.* Powered by JazzHR 7yAPJwE9r7

Job Description Your Precision Fuels High-Stakes Missions Satellites launch, aircraft fly, and medical systems perform because components meet exacting standards. At Senior Metal Bellows, our custom-engineered metal bellows enable these outcomes-and we're seeking an AS9102 First Article Inspection Technician to ensure every part conforms before it enters service. Impact You'll Make Own first piece and AS9102 first article inspections for high-performance components Interpret complex engineering drawings and specifications with confidence Apply GD&T (ANSI Y14.5) to verify geometry and function Collaborate with engineering to build and optimize inspection techniques Use data from inspections to identify root causes and drive continuous improvement Operate CMMs, optical comparators, micrometers, verniers, drop indicators, height gages, and related precision tools Experience & Mindset Depth in precision inspection and geometric dimensioning Practical, hands-on expertise with CMMs and manual metrology Meticulous attention to detail; fluent in complex prints Collaborative communicator with a team-first approach Continuous improvement orientation and strong problem-solving skills Grow with a Proven Innovator For over 70 years, we've pushed the limits of what's possible, serving aerospace, defense, energy, and medical markets. Join a culture grounded in collaboration, innovation, respect, trust, and excellence-backed by the global reach of Senior plc with opportunities across 12 countries. Work at our convenient Sharon, MA location just off Route 95. Compensation Hourly Rate Range: $29.00 - $34.00. Final rate will be determined by relevant experience, skills, and qualifications. Take the Next Step If you're ready to build something bigger-and ensure zero-compromise quality-apply today. Required Notices All your information will be kept confidential according to EEO guidelines. Access to our facility (and, therefore, employment) is restricted under the International Traffic in Arms Regulations (ITAR) and/or Export Administration Regulations (EAR) to U.S. Citizens, lawful permanent residents of the United States and properly-licensed foreign persons.

The QC inspector is responsible for ensuring that all products meet quality standards. This includes inspecting raw materials used in the production process, conducting tests on finished products and performing audits to identify potential areas of improvement. The QC inspector must be knowledgeable of the relevant safety regulations and have excellent attention to detail and problem-solving skills. Essential Functions Responsible for individual Inspection activities Undergo training when necessary Adhere to policies and procedures related to specific customer requirements Ability to understand specific directions and follow guidelines that are common throughout the department Ability to maintain a constant focus on quality and accuracy Ability to work with minimal supervision Specific competencies include but are not limited to following the Gowning, Personal Hygiene Procedures, and all other QC Inspection Work Instructions and SOPs including formatting Excel if required, Use of inspection equipment (Bench Linc, Vision Systems, Tensile Tester, Pin Gages, Ring Gages, Calipers, rulers, and Customer supplied fixtures) Perform Visual Inspection (using Tappi Chart) and Feel Testing. Operating the Annealing Ovens Obey all safety rules, use caution in work activities, and continuously practice safe behaviors Immediately report unsafe conditions/behaviors and work-related injuries to site supervision Qualifications Preferred High school diploma or equivalent 1 year of Product Operator experience necessary Experience within the department must be gained within 90 days for use of specific measuring equipment, displaying an understanding of the job requirements and any devices required to complete inspection/test activities Understand Quality Management System (QMS) requirements Training on the specific equipment must be fully completed within 90 days of hire Equivalent combination of education and experience is preferred An Affirmative Action / Equal Opportunity Employer Proterial Cable America, Inc. provides equal employment opportunities to all employees and applicants for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, genetic information, disability, or veteran status. As a Federal Contractor, we encourage priority referral of protected veterans under VEVRAA.

Job Title: Receiving Inspector Shift 1st Shift: 8:30 AM - 5:00 PM 2nd Shift: 12:30 PM - 9:00 PM Days: Monday - Friday Pay Rate: $19.10/hour Employment Type: Temp-to-Perm Job Summary The Receiving Inspector is responsible for inspecting incoming and returned medical devices to ensure they meet quality, regulatory, and documentation standards. This role includes verifying sterility, temperature conditions, labeling, and required paperwork before products are placed into inventory. The position requires accurate data entry to track inspection status and working in a regulated warehouse environment. SAP and WMS Manhattan systems training provided. Candidates must be able to lift up to 40 lbs and pass a background check and drug screening (including marijuana). Department Openings Returns Department - 2 Openings Process and inspect returned products only Perform accurate data entry and system documentation Use pallet jacks as needed (experience preferred; training provided) Maintain strong attention to detail and organization Complaints Department - 1 Opening Inspect used medical devices returned from hospital surgery departments Comfort with handling open/used products, including exposure to blood, is highly desirable Must be comfortable working around blood Prepare and send clear, professional written communications regarding inspection findings What You'll Need High school diploma or equivalent experience Good computer skills and data entry Strong attention to detail and organizational skills Good written and verbal communication skills Ability to lift up to 40 lbs Previous experience in inspection, quality control, or a regulated environment is a plus Pay Details: $19.10 per hour Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, EAP program, commuter benefits and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable. Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: The California Fair Chance Act Los Angeles City Fair Chance Ordinance Los Angeles County Fair Chance Ordinance for Employers San Francisco Fair Chance Ordinance Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Job Description The Quality Control Technician - Troubleshooting is responsible for inspecting and testing cable and wire products and processes to ensure they meet all quality standards, specifications, and regulations. This includes performing visual inspections, dimensional measurements, electrical, and functional tests. The primary function of this role is to evaluate nonconforming products and to determine the necessary actions to rework the product. The QC Technician must also be able to read and interpret blueprints, engineering drawings, and specifications. This position requires the use of High Voltage, all safety guidelines, procedures, and regulations to prevent accidents and ensure a safe working environment must be followed. The Quality Control Technician - Troubleshooting is a respectful team-player that works well with diverse internal team members. This position is ambitious, self-motivated, results-driven, and demonstrates problem solving skills with sound judgment. This role is also responsive, flexible, accessible, detail oriented, willing to embrace change and proactively adjust plans. Partnering with and elevating others by communicating with peers to increase awareness and ensure team success. Essential Duties and Responsibilities: Troubleshoot nonconforming cables, fill out nonconformance reports and communicates findings to Production Quality Supervisor and Quality Manager Detect and report unusual or non-conforming documentation, materials, conditions, or product to Production Quality Supervisor and Quality Manager. Assist and sometimes lead Root Cause and Corrective Action efforts. Inspect materials, components, and final product to ensure they meet quality standards. Measure dimensions of cable and wire products to ensure they meet specifications. Conduct visual and electrical tests on cable and wire products to ensure they meet performance requirements and identify any defects. When required, perform functional tests on cable and wire products to ensure they operate as designed. Document the results of all tests and inspections. Create, update, compile, save and maintain documentation into internal database. Work with various internal personnel and departments to communicate and resolve quality issues. Comply and support company policies and quality management system. Maintain and create a clean, uncluttered environment that reduces waste and optimizes productivity by following the 5S steps: sort, set in order, shine, standardize, and sustain. When required, help with continuous improvement efforts. More additional responsibilities may be applicable per the Quality Manager. Qualifications: High school diploma or equivalent. 1+ year of experience in quality control, preferably in the cable and wire manufacturing industry. Experience with visual inspection and dimensional measurement. Basic understanding of Microsoft Office and Adobe. Ability to read and interpret blueprints, engineering drawings, and specifications. Strong attention to detail. Ability to work independently and as part of a team. Strong communication skills. Proficient with computers and comfortable using Microsoft Office Suite (Word, Excel, etc.). Physical Qualifications: The physical demands described are representative of those that must be met by an employee to successfully perform the essential function of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is regularly required to sit; stand; crouch; stoop; walk; talk; hear; use hands to handle or feel assemblies; reach with hands and arms for materials and tools. The employee must occasionally lift and/or move up to twenty-five (25) pounds. They must also have the ability to see details at close range (within a few feet of the observer), color vision, depth perception and ability to focus. This position requires use of information or access to hardware and documents which are subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee. Benefit Conditions: Waiting period may apply Only full-time employees are eligible This Job Is: A job for which military experienced candidates are encouraged to apply Job Type: Full-time Salary: $20.00 - $25.00 per hour Benefits: 401(k) Dental insurance Health insurance Paid time off Vision insurance Experience level: 1 year Schedule: 8 hour shift Day shift Monday to Friday Overtime Work setting: In-person Experience: Blueprint reading: 1 year (Required) Quality control: 2 years (Preferred) Work Location: In person