Inspector jobs in Highlands Ranch, CO

This is a Full Time Lane Inspector Position. Opus is a world-leading vehicle inspection and intelligent vehicle support company that has been contributing to a safer and cleaner world since the company was founded in 1990. We take pride in helping make our world a safer and cleaner place. Duties and Responsibilities: Lane Inspector - Vehicle Emissions testing. You will play an important role in limiting the production of Emissions by identifying the polluting vehicles. As a lane inspector, YOU will be responsible for the following: * Perform emission inspection functions following established procedures, and enter and verify vehicle information with computer data. * Operate vehicles during the emissions system test and use exhaust analysis equipment. * Direct motorists in and out of the station, provide test results, instruct customers on next steps in the inspection process, and collect inspection fees. * Other job duties as assigned. No experience required; we will train you! Requirements: * Must be 18 years of age. * Valid and unrestricted driver's license. * Physically able to stand, bend, stoop, kneel, and balance unassisted for extended periods of time. * Physically able to lift, push, and pull up to 20 lbs on an occasional basis. * Basic computer skills. * Full-time hours requirement is 40 hours a week. Qualifications: * Team player. * Excellent customer service skills. * Ability to work efficiently and multitask in a fast-paced, busy shop environment with a smile and positive attitude. * Work in an environment that includes vehicle exhaust fumes, noise, and heat. * Work in all weather conditions. * Work safely around operating motor vehicles. All offers of employment are contingent upon completing and meeting the criteria of a background check, drug screening, and I-9 verification.

Job Details Experienced Denver, CO Full Time High School CEI (Construction / Engineering / Inspection) Expectations Founded in 1944, Lochner is a trusted infrastructure services provider for aviation, surface transportation and water clients who need high-quality, forward-looking solutions to complex challenges. Our vision is to become a Top 100 leader in the A/E industry, centered on an agile, engaged, and empowered workforce coming together to embrace the art of the possible and make a lasting difference in our world. Are you ready to join us on this journey? As a people-centric company, Lochner's purpose is to empower our team to put their knowledge to work, enhancing communities across the US. To achieve this, we hire candidates of all experiences and skillsets because amazing things happen when people with diverse backgrounds come together to solve problems. We believe collaboration is more than a buzz word - it is a guiding principle in which every point of view is valued and heard and is the driving force in delivering our best work. At all levels of the organization, we foster an entrepreneurial spirit and culture of autonomy to advance our strategic vision and continually seek our next success story. Lochner - learn more about us Are you ready to join us? Your impact: Observes and monitors field work activities on a project to ensure conformance to plans, specifications, and other contract documents. Checks lines, grades, dimensions, and elevations using standard field measuring equipment. Read and Interpret contract plans, specifications, and contract language. Observes highway work zones and traffic control setups and reports potential issues to supervisor. Reviews project activities with contractor's field supervision to resolve disputes and other project issues. Coordinates materials testing with third-party. Documents daily work activities and pay items. Works under the direct supervision of a Field Project Engineer or Construction Manager. Additional responsibilities as needed. Please note that while there is no immediate vacancy for this role, we are open to interested candidates as work presents itself. Who you are: High School Graduate or Equivalent with a minimum of five (5) years of experience in construction inspection, two (2) years of which shall have been in bridge and/or roadway construction inspection on public projects or a Civil Engineering degree and one (2) years of road & bridge experience. Working knowledge and understanding of CDOT specification, standards and forms; A minimum of two (2) years inspecting CDOT projects. Ability to read road and bridge construction plans. Basic computer skills including but not limited to MS Word and Excel. Ability to work independently. Willingness to work weekends, nights, and swing shifts as required on assigned projects. Valid Driver's License and clean driving record. CDOT inspector certifications, or ability to obtain within 6 months. The salary range for this position is between $75k and $95K per annum, based on experience and qualifications. Commitment Joining Lochner means gaining access to a comprehensive suite of benefits designed to support your health and financial well-being throughout your career. Lochner provides an extensive total rewards package that includes: Competitive Premiums for Medical, Dental, and Vision Paid Time Off and Flexible Holiday Program Company Paid Disability (includes paid Maternity Leave), and Life Insurance Health Savings Accounts (HSA) with Employer Contribution Flexible Spending Accounts (FSA) for Medical Expenses and/or Dependent Care Paid Family Leave Retirement Plan with Employer Match Flexible Work Schedules (Hybrid or Remote, when possible) Wellness Program for Physical and Mental Health Lochner Cares Non-Profit 501c3 Education and Training Assistance Employee Assistance Program Employee Discounts Paid Time Off for Charitable Acts of Service What we offer - Learn more Work Environment The work environment characteristics described are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly exposed to moving mechanical parts and outside weather conditions. The noise level in the work environment is usually loud. Physical Requirements The physical requirements must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Intermittent sitting, walking, standing, bending, squatting, climbing, kneeling, twisting, stoop, crawl, and lifting. The employee must frequently lift and/or move light equipment up to 20 pounds. Must be alert to equipment in the field, occasional need to work near hazardous equipment and machinery, occasional need to walk on uneven ground, exposure to dust, gas or fumes, exposure to noise, extremes in temperature or humidity, and potential work at heights. Equal Employer Lochner is proudly committed to recruiting and retaining a diverse and inclusive workforce. Lochner provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. All positions at Lochner require an applicant who has accepted an employment offer to undergo pre-employment screening. Background checks include SSN/SIN validation, motor vehicle verification, education verification, employment verification, a criminal check, search against global sanctions and government watch lists, and drug test. All employment offers are contingent upon successful results of the pre-employment screening. California Privacy Policy

Full-time Description A Quality Control/Floor Inspector assists the Chief Inspector with all things as required and needed in support of the Repair Station and operations. This person reports directly to the Chief Inspector. Key Duties and Responsibilities: Maintain a clean and orderly workspace. Work efficiently with the team to ensure a smooth workflow. Assist the Chief Inspector with logbook research as required. Perform aircraft inspections when not inspecting discrepancies or work orders. Assist the Chief Inspector with floor inspection items. Giving the “ok to close panels” and being the “backup” to ensure quality and safety of our products. Assist the Chief Inspector with returning aircraft to service after work is completed. Ensure that we are delivering a safe aircraft that meets our quality standards. Inspecting discrepancies once completed for proper repairs, correct paperwork, and correct sign-off of discrepancies. (Make sure accepted or approved procedures are used at all times.) Other duties as assigned. Benefits Available with employment: Medical, Dental, Vision and Supplemental Plans Anticipated application close date: 12/24/25 Requirements Education Requirements: Must have High School Diploma or GED Must have an FAA approved Airframe and Power plant license. Experience Requirements: Sincere desire to assist others. Able to develop a friendly rapport. Professional in appearance and mannerisms. Ability to work independently with minimal direction. Ability to understand technical publications and requirements. Clear understanding of FAA and Repair Station requirements. Assist with or undertake any other duties as assigned by key personnel. Ability to work with several individuals while showing independence in balancing and prioritizing requests. Other Requirements: Must have a clean driving record. Ability to pass a background check. Occasionally required to lift up to 35 pounds. Must be able to sit, stand, kneel and climb ladders. Must be able to show up to work on time ready to work. Must have dependable transportation to and from work. Ability to pass an initial and random drug screening test. Ideal Candidate Will Possess the Following Skills: Attention to detail. Being open to change. Being reliable, responsible, dependable, and fulfilling obligations. Willingness to take on responsibilities, accept changes, and challenges. Accepting criticism and dealing calmly and effectively with high stress situations. Being pleasant with others on the job and displaying a good-natured, cooperative attitude. An ability to guide oneself with little or no supervision, depending on oneself to get things done while following the requirements of the Repair Station. Salary Description $35-$45/hr DOE

Apply Description $500 New Hire Bonus! Quality Inspector Job Duties Include: Approving finished products by confirming specifications; conducting visual and measurement tests; returning products for re-work; performing and/or verifying others' re-work. Quality Inspection Includes: • Ability to read, understand, and follow documented work instructions and Quality Plans for injection molded and assembled parts • Visual inspection and comparison to established cosmetic standards • Dimensional Inspection using manual tools and electronic measuring systems • Calipers, Micrometers, Pressure Testers, CMM, SmartScope, and others • Receiving Inspection • Verification of attributes of materials, inserts, and other components • Product Labeling and Traceability Verification • Documentation of inspection results Education and/or Experience Requirements: • Basic Math Skills, including reading and interpreting instrumentation • High School Diploma or Equivalent • Ability to speak, read, and write basic and technical English (Spanish is a plus) • Experience in Manufacturing Quality or Plastic Injection Molding a plus but not required Pay is $18 to $35 depending on experience and includes paid vacation, paid sick leave, health insurance and 401K with company match. Please apply through this ad. or Drop off resume at: Caroba Plastics 3219 S. Platte River Dr. Englewood, CO 80110 - Please make sure you tell the receptionist you are applying for the QC position. Please no phone calls regarding job posting.

SEAKR is looking for a motivated Lead, Quality Control Receiving Inspector (QCRI) who has experience inspecting high-reliability Mechanical and EEE (electrical) components. A successful candidate will have a technical aptitude with analytical problem-solving skills, the ability to work in a team environment, and effective time management skills for efficient task prioritization. The QCRI reports to the Receiving Inspection Supervisor within the Supply Chain division. Job responsibilities include… Verifying documentation, materials, and products meet the PO and engineering drawing requirements Performing basic dimensional inspections using micrometers, calipers, feeler gages, etc. Performing basic electrical inspections such as continuity testing in accordance with engineering drawing requirements Managing multiple receipts simultaneously, in different physical and electronic locations Navigate SEAKR's Enterprise Resource Planning (ERP) tool to support review, routing, and disposition non-conforming product and/or electronic inventory transactions Tracking and documenting arrival reports Processing and managing supplier RMAs Create, document, and implement inspection criteria and procedures Maintain an active role on internal continuous improvement teams Provide CMM testing and reporting as required Review and edit documentation as required. Able to work independently and as a team, along with Property, Supply Chain (Buyers), SQE's, QE's and other department/teams as required. Cover and report team duties in absence of the RI Supervisor when required. Qualifications A High School Diploma or GED is required. Candidate will have a minimum of 6 years of experience in product assurance, preferably in an inspection role (receiving, in-process, or final QA/QC related to electronics manufacturing). The candidate will also be able to satisfy the following: Must be able to pass IPC J-STD and IPC-A-610 inspection certification testing, including vision testing Must have a basic knowledge of dimensional inspection tools Must have the ability to interpret and apply engineering documentation (e.g., dimensioned drawings, SCDs, commercial datasheets) Must have a strong attention to detail to support strict adherence to work instructions or inspection procedures Have good attendance Work independently, and as a team. Preferred skills & experience include: CMM programming and/or operational experience; Proficient knowledge in GD&T Familiarity with AS9102 FAI requirements Training/Certification to requirements for electronic assemblies (e.g., J-STD-001, IPC-A-610 or similar) Experience operating inspection or test equipment (e.g., XRF, X-Ray or similar) Proficiency with an Enterprise Resource Planning (ERP) system (e.g., Kronos, IFS, Oracle, SAP, etc.) Additional Information Compensation: Base pay range is $23-30/hour, depending on qualifications. SEAKR has very rich medical, dental and vision insurance plans, along with a generous 401(k) retirement plan. In addition to base salary, employees are eligible for a year-end bonus. SEAKR offers a variety of paid leave, such as vacation, sick, bereavement, and FMLA. Schedule: This position will be onsite during regular M-F workdays with 9-hour shifts, with every other Friday off. SEAKR is an Equal Opportunity Employer - All your information will be kept confidential according to EEO guidelines. US Citizenship Required Applications will be accepted until 12/11/25

Perform the approval for return to service after maintenance or modifications of an aircraft/engine/article in accordance with regulations, to include completion of FAA Form's 8130-3 and 337's when required along with logbook entries. Ensure aircraft or any component returned to service meet type design or properly altered state and in condition for safe flight. Ensure aircraft airworthiness by maintaining safety conditions conforming to standards set by the FAA and company policy. Verify all inspections performed comply with Manufacturer's Instructions for Continued Airworthiness and Air Methods Repair Station Manual. Essential Functions and Responsibilities include the following: * Perform work order opening and closing tasks, preliminary inspections, hidden-damage inspections, statement of work review, and final inspections on civil aviation articles in accordance with the current maintenance data. Enters the return to service / airworthiness release authorization into the aircraft / article's permanent records (logbook) along with a list of the work performed. Review completed production control work packages for completeness and proper signoff, prior to execution of an airworthiness release or issuance of a serviceable tag * Research aircraft and engine maintenance log pages to ensure compliance with current regulations, manufacture's programs, and the owner / operator's (for 3rd party work in the future) policies and procedures. Validate that any maintenance performed for 14 CFR Part 135 air carriers under a CAMP or AAIP program (to include RII inspections) in accordance with that carrier's FAA approved inspection manual. * Inspect for airworthiness and quality of aircraft maintenance and alterations to include overseeing in process inspections, adjustments, repairs, or modifications made to aircraft components, sub-assemblies, and final product as well as issuing "OK to Close" for aircraft component parts. Ensure all tasks completed adhere to the manufactures, company, and regulatory policy and procedures. Responsible to ensure that all work performed by all company technicians assigned to a work order (supervise maintenance), is performed to current applicable FAA standards and results in an product that is airworthy and safe for flight. * Ability to read and interpret complicated drawings, specifications, purchase orders, statement of work and standards to determine quality status. Must possess the skill and experience to use precision measuring instruments in a precise, accurate and repeatable manner. * Support production and management with failure and nonconforming material data recording and reporting. * Identify and communicate continuous improvement opportunities for the quality program. * Supervise the application for Airworthiness Certificates, Ferry Permits and Field Approvals with the FAA. * Supervise part incoming and receiving inspections. * Create and inspect aircraft equipment lists and weight and balance records. * Perform internal audits as specified in the FAA repair station quality control manual. In addition, assist in performing AMC safety audits. Additional Job Requirements * Regular scheduled attendance * Indicate the percentage of time spent traveling - 5% Supervisory Responsibilities This position has no supervisory responsibilities. Qualifications To perform this job successfully, an individual must be able to perform each essential function satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. In accordance with applicable laws, Air Methods will provide reasonable accommodations that do not create an undue burden so disabled employees may perform the essential functions of the position. Education & Experience * High school diploma or general education degree (GED); and three to five years' technical rotor wing experience and/or training; or equivalent combination of education and experience. * Technical knowledge of the following aircraft (in order of importance): Bell 407 and Airbus AS350 / EC130 series, Airbus EC-135 Series, Airbus EC-145 Series, Bell 429, Bell 412 Series, Leonardo A-109 Series, Leonardo A119 Series, Textron King Air, and Sikorsky S60/S70 derivatives. * Technical knowledge of aircraft, appliances, and processes on the FAA part 145 Operations Specification * Previous experiences in a FAA Certified Repair Station. * Proficient with FAR's and ability to perform complex research of Federal Regulations. * Commitment to airworthiness and qualify of aircraft parts approved for return to service. Skills * Individual diversity and adaptability. * Excellent written and verbal communication * Must be able to work autonomously and to prioritize tasks. Computer Skills * Proficient with Microsoft Suite, including Word, Excel, and Outlook Certificates, Licenses, Registrations * A&P Certificate required * FAA Inspection Authorization (IA) preferred. * FCC GROL License preferred. * Abaris composite training or equivalent preferred. Air Methods is an EEO/AA employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. Minimum pay USD $64,445.00/Yr. Maximum Pay USD $93,575.00/Yr. Benefits For more information on our industry-leading benefits, please visit our benefits page here. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. 41 CFR 60-1.35(c)

Hourly: $23.00-$29.00/hr York Space Systems was founded to radically improve spacecraft affordability and reliability, transforming, and enabling next-generation space mission operations worldwide. Today, York is one of the most innovative aerospace companies, specializing in end-to-end customer solutions and the rapid production of spacecraft platforms. York's complete Space Segment Solution includes spacecraft production, payload integration, system integration & test, launch services, ground segment services, and mission operations, enabling customers to leverage York's existing technology solutions to get to orbit rapidly and responsively. The Quality Inspector II is primarily responsible for the physical inspection and documentation of the conformance of various material and components received in support of production. Typical daily responsibilities include dimensional inspection of components, creation of inspection documentation, review of vendor provided materials, support to non-conformance processes and engagement with supported teams including production, inventory and procurement. This role ensures compliance with industry best practices included in quality standards, customer requirements, and regulatory guidelines. The Quality Inspector II will analyze non-conformances, lead/support root cause and corrective action investigations, and work cross-functionally to improve product quality and process efficiency. KEY RESPONSIBILITIES: Non-Conforming Material & Process Management Identify, document, and manage non-conforming material through quality processes. Support quality leadership in the management of material dispositions. This could include participating in non-conforming material investigations using problem-solving methods such as 8D, 5-Whys and Fishbone Diagrams. Support containment activities to minimize production disruptions and customer impact. Maintain and improve the non-conformance management system to ensure traceability, accuracy, and regulatory compliance. Quality System & Compliance Support compliance to quality standards, customer-specific requirements, and other applicable industry regulations. Participate in internal and external audits, including customer, regulatory, and third-party audits. Ensure proper documentation and records management related to non-conforming material and corrective actions. Support the creation of quality processes and procedures including material handling. Conduct or support training of quality processes and procedures to other teams. Conduct of Quality Inspections Using and maintaining measurement tools, systems and best practices complete inspections of various materials and components against engineering documentation and industry standards. Document completed inspections and initiate appropriate actions where non-conformance may be identified. This could include preparing detailed reports for engineering, quality, production or procurement. Ensure vendor compliance to any industry standards called out in purchasing contracts or documentation. This could include AS9102 FAI, IPC or Mil-Std requirements Process Improvement & Risk Mitigation Work with cross-functional teams to implement process improvements that reduce defects and enhance product quality. Participate in risk assessments related to non-conforming material and critical process deviations. Contribute to continuous improvement initiatives, such as Lean and Six Sigma and Kaizen projects, to enhance manufacturing efficiency and product reliability. QUALIFICATIONS AND EXPERIENCE: High school diploma with a preferred technical certification or associate degree in a related field. 3-5 years of experience in quality inspection or manufacturing within the aerospace, defense, or related high-reliability industry. Knowledge of quality standards, and regulatory requirements. Experience with quality tools such as 8D, FMEA, SPC, and Six Sigma methodologies. Ability to interpret engineering drawings & specifications. Excellent communication and problem-solving skills with the ability to work cross-functionally. Proficiency in quality management systems (QMS), ERP systems, and data analysis tools. PREFERRRED QUALIFICATIONS: Experience with AS9100, ISO9001 or AS9102 Quality Standards. Experience with industry standards including IPC-A-610, IPC/WHMA-A-620, J-Std-001, ASME Y14.5 and MIL-Standards. Hands-on experience with quality inspection and testing methods. BENEFITS In addition to compensation, York Space Systems is proud to offer a comprehensive benefits package including medical, dental, and vision insurance along with PTO and a 401K. HOW TO APPLY Interested candidates are encouraged to apply by clicking the “Apply for this position” link below. York Space Systems will be accepting applications on a rolling basis until the position is closed. York Space Systems provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, military or protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. Must have permanent authorization to work in the United States. This policy applies to all terms and conditions or employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training. YORK SPACE SYSTEMS IS AN EEO EMPLOYER.

Job Description Inspection & Packaging Lead (1st Shift) This position reports directly to the Inspection and Packaging Supervisors as well as the VILP Manager. The role is responsible for general support of the Visual Inspection, Labeling, and Packaging of finished sterile compounds. The Lead is responsible for ensuring the accuracy for label reconciliation, document completeness and correctness of all product identification. Why Join Leiters Health? Are you passionate about making a real impact in the pharmaceutical industry? Do you thrive in a collaborative, innovative environment where your skills and ideas are valued? Look no further - Leiters Health is seeking talented individuals like you to join our dynamic team! At Leiters Health, we're not just another pharmaceutical company - we're pioneers in the field, dedicated to delivering high-quality compounded sterile products and outsourced solutions to healthcare providers nationwide. Our commitment to excellence and patient safety is at the core of everything we do. Innovative Culture: Be part of a forward-thinking company that encourages creativity, welcomes fresh ideas, and fosters an environment of continuous improvement. Meaningful Work: Contribute to a purpose-driven organization dedicated to providing critical medications and healthcare solutions that positively impact patients' lives. Professional Development: Access ongoing training, mentorship, and growth opportunities to expand your skills and advance your career within a rapidly growing industry. Cutting-Edge Technology: Work with state-of-the-art facilities and advanced technologies, staying ahead of the curve in pharmaceutical manufacturing. Collaborative Environment: Join a team of passionate individuals who are dedicated to teamwork, support, and mutual success, fostering a culture of inclusivity and collaboration. Who We're Looking For: We're seeking enthusiastic individuals who are driven, adaptable, and passionate about contributing to a mission-driven organization. Whether you're an experienced professional or just starting your career, Leiters Health provides an environment where your skills and talents will be recognized and appreciated. Sound like you? Apply today! Essential Functions: Lead and perform the line/area clearance of the visual inspection or label, and packaging activities. Review of batch record during and end of visual inspection, label, and packaging activities. Assist Inspection & Packaging Supervisors in overseeing employees who are responsible for visual inspection/labeling/packaging of finished goods. Collaborate with Inspection & Packaging Supervisors to ensure timely visual inspection and labeling of products to meet scheduled batch release dates. Ensure that training on SOPs and processes remains current. Analyze Production efficiencies downtime and waste. Lead teams to improve the results. Write investigations and CAPA actions for non-conformances in the department. Work with QA to quickly resolve any variance or document errors so that product may be released on time. Lead Problem Solving activities. Assist with maintaining batch and label inventory and managing daily staffing for visual inspection and labeling. Other duties as assigned. Supervisory Responsibilities: Lead a team of Associates, providing direction, support, and training. Provide a positive and collaborative work environment through effective communication and accountability, escalating conflict promptly and fairly. Experience and Necessary Skills: 1-year previous leadership experience or comparable experience preferred. Minimum 1 years' experience in aseptic processing preferred. Knowledge of cGMP guidelines/standards. Associate's degree or equivalent, relevant experience. Demonstrated written and oral communications skills including strong presentation skills. Excellent organizational skills and results oriented. Strong results orientation. Strong Microsoft Office skills are essential, proficient in the use of spreadsheets and word processing programs Ability to effectively bring others together and reconcile differences. Able to lift up to 50 lbs. and stand for extended periods when required Must pass an eye exam confirming 20/20 near vision corrected (with contacts or glasses) or uncorrected Must pass an eye exam confirming the ability to accurately perceive color Benefits: 100% employer paid medical plan. Dental & Vision insurance options including FSA & HSA Employer Paid Life Insurance & Employee Assistance Program Short Term & Long-Term Disability Insurance Up to 4% 401K Matching (100% vested on day one!) Generous Paid Time Off Options - vacation, sick, paid leave and holidays! $5,250 Annual Tuition Reimbursement after 6 months $1,000 Referral Bonus Program with no limit Eligible for annual bonus program Shift: Monday-Friday 6a-4:30p Timeline: We will be accepting applications on an ongoing basis until position is filled. We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, pregnancy, age, national origin, disability status, genetic information, protected veteran status, or any other characteristic protected by law. *Please note that we do not work with third-party recruiters or agencies for this position. If you are a qualified candidate and wish to apply for this job, please do so directly through our official application process. We appreciate your understanding and cooperation in this matter.

Schedule: Day and Night Shifts Available (night shift includes premium pay) Compensation: $28.00-$35.00/hour (higher range for CWI-certified candidates) A leading fabrication shop is hiring a Welding Quality Inspector to support structural steel production. This role is ideal for candidates with CWI certification or those with strong welding and quality control experience who are passionate about ensuring code compliance, dimensional accuracy, and production quality. This full-time, direct-hire opportunity offers consistent hours, competitive pay, and a clear path for advancement in a shop known for precision work and a strong safety culture. What You'll Do: Support and conduct inspections on welded structural steel components Verify dimensions, alignment, and weld quality against project drawings and standards Maintain documentation, logs, and visual records of inspections Assist with ISO 9001, AISC, and ASME conformance efforts Collaborate with production and supervision teams to uphold QA standards Participate in internal quality audits and improvement initiatives Qualifications: 3+ years in welding inspection or structural welding roles with a focus on quality CWI certification is preferred but not required - strong QC experience or interest is highly valued Experience reading fabrication drawings and interpreting weld symbols Ability to use inspection tools (calipers, gauges, measuring tape, etc.) Strong documentation and communication skills Self-directed and able to follow inspection protocols independently This is a great role for a welder ready to shift into inspection work or for an experienced QC pro seeking a steady, long-term position in a high-output structural steel shop. CWI-certified candidates will be considered for the top of the pay range.

Copart, Inc. a technology leader and the premier online vehicle auction platform globally, with over 200 facilities located across the world, Copart links vehicle sellers to more than 750,000 buyers in over 190 countries. We believe in providing an unmatched experience, every day and everywhere, driven by our people, processes, and technology. Copart, Inc. a technology leader and the premier online vehicle auction platform globally, with over 200 facilities located across the world, Copart links vehicle sellers to more than 750,000 buyers in over 190 countries. We believe in providing an unmatched experience, every day and everywhere, driven by our people, processes, and technology. Full Copart, Inc. a technology leader and the premier online vehicle auction platform globally, with over 200 facilities located across the world, Copart links vehicle sellers to more than 750,000 buyers in over 190 countries. We believe in providing an unmatched experience, every day and everywhere, driven by our people, processes, and technology. BluCar - Vehicle Cosmetic InspectorQualifications Proficiency in using digital photography equipment and basic computer skills required Strong attention to detail and the ability to accurately assess and document cosmetic damages Excellent communication skills, both verbal and written, with a customer-focused mindset Responsibilities As a Vehicle Cosmetic Inspector at BluCar, you will play a vital role in ensuring the accuracy and quality of vehicle descriptions presented to our customers You will be responsible for meticulously inspecting vehicles for cosmetic damages, accurately documenting findings, and contributing to the overall efficiency and success of our auction process More job highlights Job description General Description As a Vehicle Cosmetic Inspector at BluCar, you will play a vital role in ensuring the accuracy and quality of vehicle descriptions presented to our customers. You will be responsible for meticulously inspecting vehicles for cosmetic damages, accurately documenting findings, and contributing to the overall efficiency and success of our auction process. Essential Duties Cosmetic Inspection: Conduct thorough visual inspections of vehicles to identify and document cosmetic damages, including scratches, dents, paint imperfections, and other aesthetic flaws. Documentation: Accurately record inspection findings using Copart's proprietary software systems, ensuring that all relevant details are properly documented for transparent representation to potential buyers. Photography: Capture high-quality photographs of vehicles, highlighting both their strengths and any cosmetic imperfections discovered during inspection, to provide comprehensive visual representations to buyers. Quality Assurance: Maintain strict adherence to Copart's standards and guidelines for cosmetic inspections, ensuring consistency and accuracy in all assessments conducted. Collaboration: Work closely with other team members, including Vehicle Inspectors, Auction Coordinators, and Customer Service Representatives, to facilitate seamless communication and support efficient auction operations. Customer Service: Provide exceptional customer service by promptly addressing inquiries and concerns related to vehicle condition and cosmetic discrepancies, fostering positive relationships with both internal and external stakeholders. Continuous Improvement: Actively participate in training sessions and educational opportunities provided by Copart to enhance your knowledge and proficiency in vehicle inspection techniques and industry best practices. MINIMUM REQUIREMENTS High school diploma or equivalent required; additional education or certification in automotive technology or related field preferred. Previous experience in automotive detailing, bodywork, or cosmetic inspection strongly preferred. Proficiency in using digital photography equipment and basic computer skills required. Strong attention to detail and the ability to accurately assess and document cosmetic damages. Excellent communication skills, both verbal and written, with a customer-focused mindset. Ability to thrive in a fast-paced environment and prioritize tasks effectively to meet deadlines. Flexibility to adapt to changing priorities and willingness to collaborate as part of a dynamic team. Pay $27.33 - $30.76 per hour 401(k) and 401(k) Match Employee Stock Purchase Program Insurance: Health Life Dental Vision Accident Critical Illness Identity Theft Hospital Indemnity HSA FSA & Dependent Care FSA Company-paid Life and AD&D insurance Paid time off Posting End Date: 10-24-2025 At Copart, we are focused on harnessing the power of diversity, inclusion, and collaboration. By embracing diverse perspectives, we open doors to innovation and unleash the full potential of our team. We are dedicated to fostering a workplace where everyone feels appreciated, included, and inspired to grow and contribute meaningfully. E-Verify Program Participant: Copart participates in the Department of Homeland Security U.S. Citizenship and Immigration Services' E-Verify program (For U.S. applicants and employees only). Please click below to learn more about the E-Verify program: E-verify Participation Right to Work

Job Responsibilities: Conduct thorough inspections of PC boards for compliance with IPC-610 standards (Class 2 and Class 3). Document inspection results accurately and ensure alignment with customer specifications. Collaborate with the quality management team to address any non-conformance issues. Industry Experience: Experience in electronic manufacturing or quality inspection in industries requiring ITAR compliance. Technical Qualifications and Certifications: IPC-610A Certification required. 3+ years of experience in electronic PC board inspection, specifically for Class 2 and Class 3 PCBAs. Proficiency in inspecting electronic PC boards per customer specifications and ITAR compliance requirements. Job type: 1099 contract Project Duration: in a 1099 Contract, Project duration varies. Shift Hours: May vary with a maximum of 8 hrs. on site during regular business hours (Mon-Fri) Ability to commute to Westminster, CO 80234, USA. (and other CO areas after current Project completion in future) Compensation: $26.00 - $40.00 per hour About Us Since 1984, Pro QC International goes above and beyond the traditional roles of quality control. We assist clients to put better quality products on the market by resolving quality and production related challenges and reducing supply chain risk and cost. Pro QC offers solutions in over 88 countries. We manage our global operations from 18 Offices Worldwide. Our clients range from small start-ups to multinational companies in the Americas, Europe, Asia, the Middle East and Africa. Join Our Team We are always looking for talented candidates in Asia, Americas, Europe, Middle-East, and Africa. At Pro QC, we value quality over quantity. We value professionalism, dependability, and teamwork. We believe in building trusted partnerships that are earned through conscious efforts. In our strive for excellence, we are passionate about delivering quality solutions to organizations around the world. Leveraging an ever-expanding, interconnected group of people from diverse backgrounds, Pro QC offers an attractive and unique opportunity as part of a global family. Our Vision: To nurture the trust of our customers and our team through dynamic interactions, creative supply chain solutions, and integrated partnership.

Job Details INTERMOUNTAIN TESTING - ENGLEWOOD, CO Full Time $40.00 - $45.00 HourlyDescription Applied Technical Services, LLC (“ATS” or the “Company”) is a leading provider of critical testing, inspection, certification, and compliance services. The Company serves clients across a diverse set of large and stable end markets including manufacturing, power generation, aerospace, medical, and defense. ATS was founded in 1967 and is headquartered in Marietta, GA. Today the Company employs nearly 2,100 team members in over 95 locations across the United States. Intermountain Testing Company, part of the ATS Family of Companies, has been in operation in the Colorado region since 1960. Their years of experience in inspection provide the highest level of expertise in the following methodologies: Certification of Welders/Welding Procedures, Visual Examination, Structural Steel Inspection, Ultrasonics, Radiography, Magnetic Particle, Liquid Penetrant, Eddy Current and other testing services and are an FAA Repair Station. Our purpose is to create a safe and reliable world and our mission is to deliver assurance through precise technical and professional services. Summary: ATS is seeking an FAA ET Inspector to support our Englewood, CO ATS Family of Companies office. This is a permanent position. Typical hourly pay range starts at $40/hr and up based on certs and experience. Relo assistance and potential sign-on bonus available, BOE and Certs. Application deadline is Oct 31st, 2025, or sooner if position is filled. Responsibilities/Duties: FAA ET Inspector Perform examinations of materials in accordance with procedures, codes, standards, and specifications. Be thoroughly familiar with the scope and limitations of the methods for which qualified and exercise assigned responsibility for OJT and guidance of trainees Interface with department managers and clients to determine scope of work and work priorities in order to meet customer expectations. Be able to prepare written instructions and to organize and report the results of examinations. Work independently and support team members Perform other job related tasks as needed and assigned by supervisors. Qualifications Minimum Requirements/Qualifications: ET Inspector - Meet the minimum requirements of a Level II ET Technician; provide documentation of education, training, and experience in the applicable NDT method(s); have a working knowledge of industrial environments and general manufacturing processes; ability to effectively communicate with other departments, and customers to report issues and solve problems. Additional Level II certs in MT and any other NDT methods, preferred. Valid FAA card Experience with FAA ET inspections to include Wheel/bolt ET and MT, Spar ET, Lear, Cessna, Piper or similar aircraft inspection experience Able Certify to NAS-410 swiftly. All applicants require the following: Ability to learn and comply with all company policies and procedures. Excellent communication skills written and verbal. Applicants must pass a drug screen and have a valid driver's license with a clean driving record. “U.S. Persons” Only: A requirement of this position is access to information that is subject to U.S. export controls under the U.S. International Traffic in Arms Regulations (“ITAR”). Accordingly, the company will consider only “U.S. Persons” for this position. A “U.S. Person” includes (a) U.S. citizens or nationals; (b) U.S. lawful permanent residents (i.e., “green card” holders); (c) persons granted refugee status; or (d) persons granted asylum in the United States. This information is collected solely for purposes of complying with U.S. export control requirements and will not be used to unlawfully discriminate in the hiring process. Work Conditions: Must be able to wear safety equipment as required by the safety department for personal protection. Work from heights on scaffolding, ladders, elevated platforms, man-baskets, etc. Work in confined spaces which will require crawling, stooping, climbing, etc. Work in around operating equipment and industrial environments. Work with radiation and hazardous materials such as cleaners, penetrants, film developing chemicals, etc. Work shifts up to 12 hours/day and 7 days/week and travel for extended periods of time Ability to lift and carry 100 pounds. Benefits: ATS offers excellent wages and advancement opportunities. ATS full-time employee benefits include: medical, dental, vision, 401k, vacation, personal time, and bonuses. EOE/AA/M/F/Vet/Disabled ATS is an Equal Opportunity and Affirmative Action Employer encouraging diversity in the workplace. All qualified applicants will receive consideration for employment without regard to their race, color, creed, religion, national origin, citizenship status, ancestry, sex, age, physical or mental disability unrelated to ability, marital status, family responsibilities, pregnancy, genetic information, sexual orientation, gender expression, gender identity, transgender, sex stereotyping, order of protection status, protected veteran or military status, or an unfavorable discharge from military service, and other categories protected by federal, state or local law.

Description The Quality Inspector role offers the opportunity to ensure excellence across manufacturing and inspection processes, supporting compliance, quality standards, and customer specifications. This position plays a key role in delivering high-quality products and services while collaborating with Engineering, Project Management, Procurement, and Manufacturing teams. Quality Inspectors drive continuous improvement, identify non-conformances, and help create a culture of safety, accountability, and operational excellence. This role provides hands-on experience with inspection tools, blueprints, and technical drawings, with increasing responsibility based on experience level. It offers the chance to mentor and develop team members, influence process improvements, and contribute directly to the success and efficiency of manufacturing operations. RK Company Overview As a second-generation, family-owned enterprise, RK Industries, LLC (RK) offers a diverse range of construction, manufacturing, advanced fabrication and building services. Led by Rick and Jon Kinning, RK represents seven distinct lines of business that work together to provide seamless project collaboration. Our exclusive building methodologies, accredited safety standards and professional execution allow us to turn our customers' greatest concepts into reality. The Quality Inspector will be responsible for ensuring that all manufacturing and inspection activities align with established quality standards, process documentation, and customer specifications. This role plays a key part in cross-functional teams including Engineering, Project Management, Procurement, and Manufacturing teams. The Quality Inspector upholds organizational performance by driving compliance, identifying non-conformances, and contributing to continuous improvement initiatives. Role Responsibilities Provide overall supervision for assigned project processes, including achieving performance metrics for safety, quality, delivery, and productivity. Drive the application of Lean Manufacturing tools and concepts to achieve measurable and sustainable improvements for assigned project processes. Train, mentor, and grow production team members to build a high performing and engaged workforce. Supervise manufacturing personnel, ensuring alignment, engagement, development, and retention of talent. Promote a culture of safety, accountability, continuous improvement, and operational excellence consistent with RK Mission Critical values. Identify opportunities for process efficiency and waste reduction. Accountable for the supervision of assigned project processes, including adherence to safety requirements, and standard work instructions. Coordinate with the Production Manager to provide tactical input on manufacturing support and execution. Participate in the development and implementation of manufacturing processes, including hazard analysis, safety procedures, and team member skill assessments. Perform these and other comparable related duties as instructed by the management team. Qualifications Quality Inspector-1: Includes All of the above plus: High school diploma or GED required; additional vocational or technical training preferred. 2+ years of related experience, preferably in a manufacturing or construction environment. Receives direct supervision in performing technical responsibilities. Familiar with basic inspection tools and techniques. Ability to follow detailed instructions and work in compliance with standard procedures. Understands acceptance criteria and is aware of internal and external quality expectations. Actively supports team goals and production timelines. Displays judgment and initiative in resolving issues and making recommendations. Willingness to contribute to continuous improvement efforts. Proficient in Microsoft Office 365 and capable of navigating ERP systems. Brings energy to a team under the general supervision of an experienced professional or manager. Quality Inspector-2: Includes All of the above plus: Associate degree or equivalent combination of education and experience. 4+ years of quality experience in manufacturing or construction, with increasing responsibility. Reads and interprets blueprints, diagrams, technical drawings, and models independently. Able to perform majority of installer tasks independently while meeting quality and delivery expectations. Strong understanding of industry standards such as NFPA 70 (NEC), NECA, and NEMA. Experience managing non-conformances and supporting corrective/preventive action processes. Effective communicator with strong documentation and reporting skills. Strong attention to detail and commitment to quality. Able to design and deliver basic training on inspection protocols or tools. Demonstrates initiative, problem-solving ability, and independent judgment in evaluating quality issues. Effectively balances workload while consistently meeting deadlines and shifting demands. Proactively collaborates with team members to meet production goals. Understands continuous improvement initiatives and is willing and able to make contributions. Quality Inspector-3 (Exempt): Includes All of the above plus: Senior-level Inspector responsible for complex installation requirements, troubleshooting, and team leadership. 6+ years of quality experience in manufacturing or construction, with increasing responsibility. Demonstrated ability to independently perform complex inspections and resolve quality issues. Proven experience identifying process gaps and suggesting effective improvements. Working knowledge of ISO 9001 principles and quality management systems. Excellent problem-solving skills with a proven ability to collaborate with engineering, project management, and production teams to effectively resolve complex related challenges and plan upcoming projects. Reads and interprets advanced blueprints and manages job requirements independently. Leads, trains, mentors, develops, and drives a quality team. Demonstrates deep understanding of methods, tools, standards, and quality assurance. Actively supports lean manufacturing principles and continuous improvement initiatives. Minimum Physical Requirements and Accountability Work outside, inside, and in dusty, noisy and hazardous areas. Work in high places, tight places, confined spaces and/or other adverse locations. Climb, balance, squat, kneel and crouch for extended periods. Ability to lift, move, and/or carry 50 lbs. Comply with all company policies and procedures. All employees are accountable for safety and health and are empowered to stop work if an unsafe condition is present. Employees should immediately notify their supervisor so that the hazard may be corrected. What Sets RK Industries Apart Safety: Our unmatched culture of safety is our foremost core value, guiding everything we do each day: Health, Safety, & Environmental Awards: Whether in Construction, Manufacturing, Fabrication, or Service, RK Industries is highly recognized and accredited throughout the industry: Accreditations & Recognition Benefits: RK Industries offers competitive benefits to support your growth and well-being: Benefits & Rewards Philanthropy: RK Industries not only builds our community through our projects, but also invests in it by supporting local services for over a decade through the RK Foundation: RK Foundation Development: Through RK University, we provide hands-on training and development opportunities that empower employees to advance their careers and grow within the company, to include leadership and technical learning opportunities, we well as our accredited apprentice program: RK University & RK Apprenticeship Program Applications are accepted on an ongoing basis. RK Industries, LLC is an equal opportunity employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability, protected veteran status or any other status protected by applicable law

Job DescriptionDescription: Where Precision Meets Purpose If you're the type who spots the tiny details no one else sees - the slight scratch, the off-angle edge, the imperfection that doesn't quite fit - you'll thrive here. At Accu-Precision, quality isn't a checklist. It's who we are. Around here, we don't just make parts, we make things that leave the planet. From components that fly through the stratosphere to tech that keeps industry moving, what you help inspect at Accu-Precision goes far. Like… outer space far. Our air-conditioned, temperature-controlled facility is built for focus, consistency, and calm… an environment where people who care about getting it right can actually do it right. As a Quality Inspector, you'll work hands-on with high-precision aerospace and advanced manufacturing components, ensuring every part that leaves our doors is worthy of our name. We invest in good people and the latest technology - because both matter equally. We live by our values: Self-improvement Attention to Detail Integrity Teamwork Communication Success Here, your ideas matter, your growth is encouraged, and your pride in your craft shows in every measurement you take. And when we're not working, we're still a team - hosting summer picnics, holiday parties, chili cookoffs, pie bake-offs, and more. Because culture isn't something you write on a wall, it's something you live. If you take pride in precision and want to be part of something that reaches beyond the ordinary - sometimes even beyond Earth - this is your place. Apply today and join a team where precision isn't just a goal - it's a culture. Compensation: $22.00 - $27.00 per hour DOE Shifts: Weekend 3×12 6am-6:30pm, 2nd 4x10 3pm-1am Benefits: Competitive pay Retirement plan Paid time off Medical/Dental/Vision/Life & EAP Training opportunities Accu-Precision is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, age, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. Requirements:

SummaryPerform product Quality Inspection and Release activities to meet operational needs for product manufactured at the Longmont site. Document defects and support Quality and Manufacturing teams with related defect tracking, investigation, communication, and issue resolution. Job Description: In this role you will be responsible for Product Release & Inspection requirements to coincide with schedules. You will document defects and assist with tracking and trending while working with Manufacturing teams to investigate causes and implement preventive measures. May provide back up support to operational functions on an as needed basis. Essential Responsibilities: Perform inspection and release of product manufactured at the Longmont facility. Support efforts to continually improve efficiency and effectiveness of our Quality Control and product release procedures. Have comfort and proven technical abilities to ensure products match drawings/prints. Contribute to the effort to maintain all documentation and quality records for product inspection and release to ensure compliance including N299 Nuclear standards. Interacts with peers, manufacturing supervisors, engineering to help resolve technical questions and potential issues. Provide input to controlled documentation related to product release and inspection, assist with maintaining daily SQDC boards. Requires some personal initiative and occasional ingenuity, planning, scheduling, organizing and prioritization of workload. May provide advice, training, & guidance to lower-level team members on projects Provide training and communication related to Manufacturing caused defects to shop teams. Document and record repeated issues, track and trend findings and collaborate with assembly supervisor trends discovered in QC of products. Qualifications/Requirements: Ability to work 1st shift (flexible start) High School diploma or equivalent At least three years of relevant experience with technical products and exposure to quality control processes. Proficient with computers including Windows and Microsoft office products (Excel is a must) Attention to detail and accuracy. Strong written and verbal communication skills with the ability to effectively collaborate with cross-functional teams. Desired Characteristics: Technical/ associate degree in technology or similar technical area. Sound decision making and problem-solving skills. Flexible and proven ability to adapt in a changing environment. Ability to multitask and work on several projects simultaneously without compromising quality. Ability to work in a team environment. Dependable and safety minded, self-motivated and easily directed. Driven to build effective working relationships with coworkers, customers, engineers, and management of all levels. Driven to process improvements and effectiveness of QC procedure and work instructions. Leadership Skills: Demonstrated ability to lead and inspire a team, providing clear direction, setting goals, and fostering a positive work environment. Analytical Thinking: Strong analytical skills to assess identify trends and make data-driven decisions for process improvement. Attention to Detail: Meticulous attention to detail to ensure accurate documentation, compliance. Time Management: Exceptional organizational skills to prioritize tasks, meet deadlines, and handle multiple projects simultaneously. Pay Transparency: The base hourly pay range for this position is $25.82 - $30.62/hr. The specific pay offered may be influenced by a variety of factors, including the candidate's experience, education, and skill set. This position is currently offered at a Level 2 pay rate. However, there is potential for a higher compensation if your skills and experience align. This posting is expected to close when suitable candidate is identified. Benefits Available to You: GE employees rise to the challenge of building a world that works. In order to meet this mission, we provide varied, competitive benefits to help support our workforce: Our Culture | GE Vernova (gecareers.com) Our compensation & benefits are designed to help you manage your personal and family needs, while rewarding high performers. We offer a robust benefits package depending on your employment status and your national requirements. A healthy, balanced lifestyle can mean different things to different people. We've created programs that support the way you live and work today. GE invests to provide opportunities to grow your career by providing a path for continued on-the-job learning and development. Inclusion & Diversity: At GE, we believe in the value of your unique identity, background and experiences. We are committed to fostering an inclusive culture, where everyone feels empowered to do their best work because they feel accepted, respected and that they belong. Click here to learn more: ************************************************** About GE Gas Power: GE Gas Power engineer's cleaner, more accessible energy that people depend on, powering growth and prosperity for people everywhere. Our leading technologies produce a third of the world's electricity thanks to our talented people, who make gas work for our customers, stakeholders and the world. Through relentless innovation and continuous partnership with our customers, we are building the energy technologies of the future and providing the cleaner, more efficient power people depend on today. Additional Information GE Vernova offers a great work environment, professional development, challenging careers, and competitive compensation. GE Vernova is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Vernova will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Relocation Assistance Provided: No Application Deadline: January 05, 2026For candidates applying to a U.S. based position only:*The Company pays a geographic differential of 110%, 120% or 130% of salary in certain areas.This posting is expected to remain open for at least seven days after it was posted on November 18, 2025.Available benefits include medical, dental, vision, and prescription drug coverage; access to Health Coach from GE Vernova, a 24/7 nurse-based resource; and access to the Employee Assistance Program, providing 24/7 confidential assessment, counseling and referral services. Retirement benefits include the GE Vernova Retirement Savings Plan, a tax-advantaged 401(k) savings opportunity with company matching contributions and company retirement contributions, as well as access to Fidelity resources and financial planning consultants. Other benefits include tuition assistance, adoption assistance, paid parental leave, disability benefits, life insurance and 12 paid holidays. New hires also two weeks of annual vacation (which may be pro-rated based on start date).GE Vernova Inc. or its affiliates (collectively or individually, “GE Vernova”) sponsor certain employee benefit plans or programs GE Vernova reserves the right to terminate, amend, suspend, replace, or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a GE Vernova welfare benefit plan or program. This document does not create a contract of employment with any individual.

GIS Field Services, Inc. has been in the mortgage field inspection industry for over 20 years and is based out of Dallas, TX. We are looking to hire Mortgage Occupancy Field Inspectors to perform residential property inspections on behalf of mortgage lenders. Our independent contractors enjoy a flexible schedule while earning weekly pay. Please visit our website to learn more about us and the industry. ************************ Job Title: Mortgage Occupancy Field Inspector County Coverage: Douglas Mortgage Property Inspection Overview: Mortgage lenders require periodic updates on the properties they have financial interest in. The lender contracts with GIS to have inspectors go out to verify the property occupancy, report general property conditions, letter delivery/posting, vacant interior walk-through or insurance repair progress report. Majority of our inspections are basic exteriors where some do require contact by door knock or letter delivery. In addition, there will be some inspections which require interior access to secured/vacant properties and appointment-based insurance loss inspections. Job Responsibilities: Requires being able to spend extended periods of time driving Efficient time management to route and complete inspections with an estimated 3-5 day turnaround time (this can vary) in your agreed territory Make a determination of occupancy based on industry standards and report general property conditions Using a mobile app, InspectorADE, to obtain all photographs, comments, and form documentation Consistent communication with your inspection manager via text, email and phone Requirements: Experience preferred, not required Complete a background check using a valid driver's license to obtain a Shield ID (Aspen Grove ABC#) - If onboarded with GIS, we will provide you the link to obtain your Shield ID Computer and internet connection Vehicle with good gas mileage iPhone or Android Printer Volt Stick Set of 11 Hud Keys (Inspector Keys) - If onboarded with GIS, we will provide a link with a discount code to obtain your Hud Keys Daylight availability Office supplies (paper, envelopes, ink) Pay: Set rate per inspection ($15-$20 per hour based on location and the number of inspections performed) Payment - inspections are paid out every Friday for work completed and approved the prior week by direct deposit This is a 1099 Independent Contractor position

Job DescriptionBenefits: Paid Training Fully Funded Certifications Opportunity for advancement Experienced Geotechnical Inspector Denver, CO $22$32/hr. (depending on experience) Full-Time | MondayFriday | 4050+ hrs./week | Overtime 1.5X Are you looking for a career where your work is hands-on, outdoors, and directly impacts the future of Denver's infrastructure? Join us as an Experienced Geotechnical Inspector and play a critical role in testing and evaluating materials for major commercial, residential, and infrastructure projects. This role is an excellent entry point into the geotechnical, civil, and construction materials testing industry, with clear opportunities for advancement. What Youll Do Collect and test soil, concrete, asphalt, and other construction materials Record GPS data and track site activities Operate drills, sampling equipment, and other field tools Stay activeworking outdoors, on your feet, and with your hands daily Travel between job sites and assist with lab testing Perform light data entry and documentation Why This Role Stands Out: Paid Training Earn while you learn, with raises tied to new certifications Fully Funded Certifications ACI, WAQTC, LabCat, CAPA (all covered by us) Career Growth Strong advancement opportunities into senior inspector or project management roles Perfect for Geology Graduates Apply your knowledge in real-world projects while building a long-term career path Impactful Work Contribute to Denver, CO growing skyline and infrastructure every day What Were Looking For: Valid drivers license with a clean record Ability to pass pre-employment background check and drug test Reliable transportation High School Diploma or GED required Must be 21+ years old

About Us We are a leading sheet metal fabrication company in Denver, CO, specializing in high-quality precision parts for the industrial, commercial, and automotive markets. We are committed to delivering superior products through disciplined processes, teamwork, and continuous improvement. Position/Job Summary: The 2nd Shift Quality Control Inspector is responsible for performing in-process and final inspections of sheet metal components to ensure compliance with drawings, specifications, and customer requirements. This position plays a key role in maintaining product quality, preventing defects, and supporting a culture of operational excellence. Key Responsibilities * Perform in-process, first-article, and final inspections using standard metrology tools (calipers, height gauges, micrometers, pin gauges, thread gauges, etc.) * Verify part conformance to engineering drawings, tolerances, and work instructions * Read and interpret blueprints, GD&T, and manufacturing specifications * Document inspection results accurately in quality records, travelers, and digital systems * Identify nonconformances * Conduct surface finish, weld quality and dimensional inspections as required * Collaborate with production operators and supervisors to resolve quality issues * Maintain a clean, organized, and safe work environment * Support continuous improvement initiatives Qualifications * Required: * 1+ years of experience in quality inspection, preferably in sheet metal fabrication or manufacturing * Ability to read and interpret blueprints * Proficiency with standard inspection tools * Strong attention to detail and accuracy * Ability to work independently on 2nd shift * Basic computer skills for data entry and documentation * Preferred: * Experience with FAIRs & ISO 9001 environments * Knowledge of welding inspection (visual weld criteria, AWS standards) Physical Requirements * Ability to stand for extended periods * Ability to lift up to 40 lbs. * Frequent bending, reaching, and handling of materials Location: Denver, CO Shift: 2nd Shift (Typical hours: 4:00 PM - 12:30 PM, Monday-Friday) Department: Quality Control Employment Type: Full-Time What we offer: Health Benefits: Medical, dental, and vision coverage. Company paid for Life insurance, short-term and long-term disability insurance. Additional Benefits: Paid time off, Floating Holidays, Volunteer time off, and sick time off (depending on state of employment). 401k Plan Employee Perks: Discounts on products and services. Equal Opportunity Employer/Veterans/Disabled This employer participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S. If E-Verify cannot confirm that you are authorized to work, this employer is required to give you written instructions and an opportunity to contact Department of Homeland Security (DHS) or Social Security Administration (SSA) so you can begin to resolve the issue before the employer can take any action against you, including terminating your employment. Employers can only use E-Verify once you have accepted a job offer and completed the Form I-9.

Job Description About Us We are a leading sheet metal fabrication company in Denver, CO, specializing in high-quality precision parts for the industrial, commercial, and automotive markets. We are committed to delivering superior products through disciplined processes, teamwork, and continuous improvement. Position/Job Summary: The 2nd Shift Quality Control Inspector is responsible for performing in-process and final inspections of sheet metal components to ensure compliance with drawings, specifications, and customer requirements. This position plays a key role in maintaining product quality, preventing defects, and supporting a culture of operational excellence. Key Responsibilities Perform in-process, first-article, and final inspections using standard metrology tools (calipers, height gauges, micrometers, pin gauges, thread gauges, etc.) Verify part conformance to engineering drawings, tolerances, and work instructions Read and interpret blueprints, GD&T, and manufacturing specifications Document inspection results accurately in quality records, travelers, and digital systems Identify nonconformances Conduct surface finish, weld quality and dimensional inspections as required Collaborate with production operators and supervisors to resolve quality issues Maintain a clean, organized, and safe work environment Support continuous improvement initiatives Qualifications Required: 1+ years of experience in quality inspection, preferably in sheet metal fabrication or manufacturing Ability to read and interpret blueprints Proficiency with standard inspection tools Strong attention to detail and accuracy Ability to work independently on 2nd shift Basic computer skills for data entry and documentation Preferred: Experience with FAIRs & ISO 9001 environments Knowledge of welding inspection (visual weld criteria, AWS standards) Physical Requirements Ability to stand for extended periods Ability to lift up to 40 lbs. Frequent bending, reaching, and handling of materials Location: Denver, CO Shift: 2nd Shift (Typical hours: 4:00 PM - 12:30 PM, Monday-Friday) Department: Quality Control Employment Type: Full-Time What we offer: Health Benefits: Medical, dental, and vision coverage. Company paid for Life insurance, short-term and long-term disability insurance. Additional Benefits: Paid time off, Floating Holidays, Volunteer time off, and sick time off (depending on state of employment). 401k Plan Employee Perks: Discounts on products and services. Equal Opportunity Employer/Veterans/Disabled This employer participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S. If E-Verify cannot confirm that you are authorized to work, this employer is required to give you written instructions and an opportunity to contact Department of Homeland Security (DHS) or Social Security Administration (SSA) so you can begin to resolve the issue before the employer can take any action against you, including terminating your employment. Employers can only use E-Verify once you have accepted a job offer and completed the Form I-9.