Inspector jobs in Milford, CT - 172 jobs

Introduction The mission of the New Haven Health Department is to ensure and advocate for the health and well-being of all New Haven residents. The Bureau of Environmental Health maintains as its principal goal the preservation and protection of the environmental quality of the City of New Haven. Work includes: Utilize and enforce applicable sections of the State Public Health Code, State Statutes, and Municipal Ordinances Resolve cases of childhood lead poisoning; provide educational outreach activities and assist with distribution of federal lead abatement funds to prevent lead poisoning. Investigate and resolve public health nuisances and infractions of applicable statutes and/or ordinances Assist in preparing for and responding to public health emergencies Lead is a poisonous substance found in most homes in New Haven, especially those built before 1978. In fact, over 80% of New Haven homes are likely to contain lead. When exposed to lead, children or adults can have permanent and severe health problems. PRIMARY FUNCTIONS This is a technical position under the general supervision of the Environmental Health Program Director or designee in the Department of Health to perform investigations, education, and outreach for the prevention of childhood lead poisoning. Work includes inspections for the purpose of determining the presence of lead-based paint and surface coverings and lead in soil, dust and drinking water. Work is performed within the framework of existing laws, ordinances, policies, and regulations. TYPICAL DUTIES AND RESPONSIBILITIES Inspects buildings and dwellings for possible sources of lead poisoning. Conducts investigations, following established protocols, of home environments of children exhibiting the symptoms of blood-lead poisoning. Performs inspections using special instruments to identify surfaces containing lead paint. Collects samples of paint, dust, water, and soil from dwellings and delivers samples to laboratory. Document findings accurately and take photographs or videos, as necessary. Follows procedures to ensure abatement of all areas containing lead paint which may pose a direct hazard to the health of a child. Reinspects dwellings after completion of repairs to ensure compliance with regulations. Confers with individual property owners relevant to service of notices and violations. Fosters a cooperative working relationship with other city and state agencies. Records test data and prepares reports, summaries, or charts that interpret test results. Prepares reports, analyses and recommendations concerning inspection duties and outcomes. May conduct special surveys relating to general environmental health disciplines. May assist in coordinating duties with other concerned agencies. Develops and implements lead abatement plans for properties with confirmed lead hazards, including coordinating with property owners, contractors, and other stakeholders. Assists with providing educational workshops and outreach activities to raise awareness about lead poisoning prevention and provide information on available resources for lead abatement. Performs related work as required. EDUCATION, QUALIFICATIONS & EXPERIENCE Graduation from an accredited four-year college or university with a Bachelors' degree in Public Health, Environmental Science, Occupational Health and Safety, or directly related field, and A minimum of one (1) year of hands-on experience in environmental health inspection and enforcement, Or any equivalent combination of training and experience which provides the following knowledge, abilities and skills: KNOWLEDGE, EXPERIENCE, SKILLS & ABILITIES Considerable knowledge of policies, procedures, methods, and industry standards relating to environmental health. Considerable knowledge of lead poisoning, its effects on children, and long-term health implications. Knowledge of lead hazard identification, assessment, and effective abatement strategies. Considerable knowledge of current issues, research findings, and regulatory decisions regarding childhood lead poisoning. Demonstrated ability to conduct thorough investigations of buildings and dwellings to identify hazards. Competency in utilizing specialized instruments to test for surfaces containing lead paint. Excellent record-keeping skills, including accurate documentation of inspection findings, supported by other media as needed. Ability to prepare detailed written reports, summaries, analyses, recommendations, and charts that interpret test results. Ability to assist with development and implementation of effective lead abatement plans for properties with confirmed lead hazards. Ability to coordinate abatement efforts, including liaising with property owners, contractors, and relevant stakeholders. Strong interpersonal skills for conducting educational workshops and outreach activities aimed at raising awareness about lead poisoning prevention. Ability to use standard Microsoft Office with adeptness and ease, with the ability to learn new emerging technologies. Ability to effectively communicate with co-workers, other City agencies, the public, property owners, and other stakeholders. Ability to remain current on relevant literature, training, research findings, and industry advancements in the field of environmental health. Commitment to ongoing professional development, including attendance at conferences, workshops, and training sessions to stay updated on advancements in lead inspection and abatement techniques. Proven ability to work collaboratively with other city and state agencies involved in environmental health and lead abatement efforts. Ability for self-driven initiative, coupled with strong time management and organizational skills, enabling efficient and independent execution of tasks and responsibilities. Demonstrated ability to work effectively and sensitively in a diverse community, recognizing and respecting cultural differences, and fostering an inclusive environment conducive to achieving common environmental health goals. NECESSARY SPECIAL REQUIREMENTS Must obtain State of Connecticut Lead Inspector Certification within 6 months of appointment, and maintain throughout course of employment (Certification training sponsored by the City). Must obtain State of Connecticut Lead Risk Assessor Certification within 6 months of appointment, and maintain throughout course of employment (Certification training sponsored by the City). Must possess and maintain a valid driver's license throughout the course of employment. This position is aligned with current Core Competencies for Public Health Professionals published by the Council of Linkages between Academia and Public Health Practice. Analytical/Assessment Skills · Working knowledge of assessing individual and community health needs. · Ability to collect reliable data and analyze. Policy Development/Program Planning Skills · Ability to plan, implement and evaluate health education strategies, interventions and programs. · Demonstrate the ability to evaluate the effectiveness of all prevention and promotion programs and outreach efforts. · Good knowledge of the complexity of Connecticut State / City of New Haven laws and regulations, monitor them for changes and have the ability to independently adapt to changes. Communication Skills · Good working knowledge of the appropriate use of technology in health prevention and promotion and ability to independently adapt to the fast-changing landscape of technology. Cultural Competency · Ability to learn about and work with all cultures, ethnicity, social economic statuses being respectful and non-judgmental. Community Dimensions of Practice Skills · Ability to facilitate/coordinate community stakeholder groups. · Ability to present, understand and relay all points of view on issues. Public Health Sciences Skills · Good knowledge of the principles, practices and terminology of public health and chronic disease epidemiology. · Good knowledge of disease prevention and health promotion programs. · Working knowledge of communicable diseases, diagnoses, spread containment and treatment options. Financial Planning and Management Skills · Basic understanding of budgets Leadership and systems Thinking Skills · Demonstrate leadership and management skills. · Ability to independently manage projects while providing supervisory / oversight to diverse groups of community members. SALARY, BARGAINING UNIT & TERMS OF EMPLOYMENT This is a "General Fund," tested position. This position is included in a collective bargaining agreement with Local 884, American Federation of State, County and Municipal Employees. Bargaining agreements available to review HERE. General Funded hires into this class shall not be covered by Social Security but rather the City pension, contributing 9% of salary. The City of New Haven does not sponsor employment visas. All applicants must have current authorization to work in the U.S. without employer-sponsored visa support. Employment is contingent upon the successful completion of: (1) an pre-employment background check, (2) a pre-employment physical examination, including pre-employment drug screening accordance with the City's Drug Free Workplace Policy**, and (3) a 90-day probationary period. Instructions and information on this pre-employment process are included in Conditional Offer of Employment. **Pursuant to the Federal Drug Free Workplace Act of 1988, The City of New Haven has a adopted a Drug Free Workplace Policy. The City of New Haven requires a pre-employment drug test, which includes screening for marijuana. Selection Plan Applications will be reviewed by the Department of Human Resources. Applicants must demonstrate within their submission that they meet the minimum requirements as listed within the job description; failure to do so may result in disqualification. Applicants meeting minimum requirements may be invited to participate in a Civil Service exam process at a later date. It is critical that you complete the application thoroughly, as the information you provide will be used to ascertain if you are eligible to move forward in the selection process. Your application and resume should indicate that you meet the minimum requirements as listed. This information may be used to determine the eligibility list. As such, this job announcement should be considered the exam announcement, and submissions may be evaluated prior to the posted closing date. Information regarding the employment and selection process can be found HERE. Please note that the only method of communication with applicants for this position will be by email. You must provide a valid, working email address and you will need to monitor your email, including spam/junk folders, for correspondence from the New Haven Human Resources Department. We reserve the right to extend an application deadline or close a job posting early to ensure we can attract and identify the best candidate(s) for a position. Conclusion To apply for this opportunity: Complete your User Registration. You are encouraged to save your Applicant Profile for future use. You MUST click on the job posting you are interested in, and click Apply or Apply Online from within that posting. MAKE SURE the job you are applying for is named at the top of the page as you review your application! Review or modify your application for that position Click "Ready to Send App" or the "Send" tab; read page and click the attestation Click "Send to City of New Haven" You will be redirected to "CONFIRMATION OF EMPLOYMENT APPLICATION SUBMISSION" You will also receive an email and text, if a number was provided, confirming your submission If you do not receive this confirmation in the next 24 hours, your application has not been submitted - please contact us at ********************* Please Note, your Profile is NOT an application for an open position. After you create your Applicant Profile, you must still click on a Job Title and complete the application as instructed for each position.

WHO ARE WE: BlackHawk Industrial provides you the highest quality industrial products and equipment, offering manufacturing services while creating innovative engineered supply solutions. We truly believe in the importance of the local relationships with the customers we service. Our employees have fun every day exceeding the expectations of our customers, suppliers, and shareholders. We distinguish ourselves as the #1 choice of industrial manufacturers who are in need of Technical Service and Production Savings. We are BIG ENOUGH TO SERVE, and SMALL ENOUGH TO CARE. **This position is located onsite in Southington, CT** SUMMARY: The Quality Inspector is responsible for inspection of cutting tools by reading prints and inspecting tools by using micrometers, calipers, comparators, indicators and other measuring tools/machines, to ensure that they meet quality standards. ESSENTIAL DUTIES AND RESPONSIBILITIES: Personally exhibits, recruits and coach's associates consistent with Core Behaviors Responsible for promoting culture of safety Perform final quality inspection of finished products in accordance with the established procedures Report all instances of rejected product or raw materials problems to management Inspect incoming raw materials as materials are received Document appropriate information for quality inspection reports for each order Create and maintain current files for all quality related correspondence Work with shop floor supervisor to review internal rejects from the shop floor Report any unusual discrepancies or problems promptly to management Perform internal quality audits Perform other related duties as assigned Knowledge and ability to use micrometers, vernier caliper, radius gages and other video inspection equipment Competent with applying math skills/tool geometry SKILLS: Knowledge of cutting tools Excellent math aptitude Excellent customer service skills Excellent communication, interpersonal and organizational skills Diplomatic and professional when resolving issues Work well under pressure, and have exceptional time management skills Self-motivated and able to work independently Must be able to follow instructions in a fast paced, flexible environment EDUCATION and/or EXPERIENCE: High School Diploma or equivalent required Prior experience inspecting aerospace cutting tools preferred CERTIFICATES, LICENSES, REGISTRATIONS: None required WORK ENVIRONMENT: Employee is regularly required to speak and hear English, stand, walk, sit, use hand to finger, handle or feel objects, tools, or controls; reach with hands and arms. Employees are required to use computers and other equipment. Employees frequently lift and/or move up to 40 pounds. Specific vision abilities include close vision and the ability to clearly focus vision. PPE REQUIRED: Wrist rests for keyboard and mouse pad. Eye protection, ear protection, steel-toed shoes as required BENEFITS: Health Insurance BCBS of OK HDHP HSA with Employer match (must meet criteria) Dental and Vision Insurance 401K Plan and Company Match FSA (Full FSA, Limited FSA, and Dependent FSA) Company paid Long Term and Short-Term Disability Company paid basic Life Insurance and AD&D/ Supplemental life and AD&D/Dependent life Ancillary Critical Illness Insurance (Wellness Rider Included) Ancillary Accident Insurance (Wellness Rider Included) Ancillary Hospital Indemnity Employee Assistance Program (EAP) - Includes concierge services and travel assistance. Paid Time Off Holiday Paid Time Off Gym Reimbursement Quarterly Wellness challenge with a chance to will money or prizes Tuition Reimbursement - after 1 year of employment *BlackHawk Industrial is an Equal Opportunity Employer **As part of our BHID policy, we require all potential employees to undergo pre-employment background and drug screening. This is a standard procedure we follow to ensure a safe and productive work environment.

As an essential business, Anomatic produces innovative and sustainable packaging for today's biggest brands. By leveraging over five decades of manufacturing expertise and employing an extensive technologies portfolio, we design, manufacture, and finish incomparable stock and customized solutions for numerous markets. Position: Quality Control Inspector Location: Naugatuck, CT Department: Quality Shift: First Shift 6am - 2:30pm JOB SUMMARY QC Stamping Inspector's primary function is the quality evaluation through gauging and inspection to validate the acceptability of stamping production, the capture of nonconforming product and the documenting of that acceptability. Evaluation is conducted as specified through provided gauging and inspection standards. QC Stamping inspectors also provide general “Quality” training, support and guidance to Stamping Department Personnel ESSENTIAL FUNCTIONS Gather samples from each stamping press twice per shift, performs visual and dimensional inspection, recording dimensional results in Mongoose (stamping inspection system of record) as well as on the Stamping Inspection Shift Report (excel file) Conduct proper defect containment, inform the Press Operators of any defects identified, as well as Set-Up personnel, Toolmakers, Tooling Engineer and/or Stamping Dept. Manager as applicable. Record actions (i.e. scrap, hold, etc..) on the Stamping Inspection Shift Report Receive QC LAB (also receiving inspection group) anodizing report, as well as supporting defect samples and address quality issues specified in their report Conduct “outgoing” (from stamping) skid audits for product from presses identified by the Stamping Q.E. Report data as specified Provided training to Stamping Department personnel as a qualified TWI trainer (Includes but not limited to developing TWI instructional break downs, providing individual training for TWI, documenting & tracking provided training, auditing TWI tasks as indicated by management) For Start-up ensure that proper documentation and standards are at each press (gauge plan, part drawing, skid tags, skid labels, and standard boards) Perform “Start-Up” inspection using applicable gauge plan, applicable standard boards and past start-up retains. Record all results on Stamping Inspection Report Maintain “Start-Up Retains Bank” located in the Toolmaker work area. As startups are approved, one raw and one anodized sample from the Start-up will be marked with the approval date and placed in the appropriate bin to be referenced on future start ups At the beginning of each shift Stamping Q.C. Inspectors will review each press and ensure correct labels, gauge plan, part drawing and correct skid tags are being used Keep Department QC Stations and/or QC Work Areas orderly at all times. Double check to make sure proper prints, gauging and inspection plans are at each press and in the QC areas as assigned. Inspect and report inspection results for New Product Development (NPD) by completing the applicable Stamping Quality portion of the First Piece Submission Routing Form Any other duties that may be assigned, including data entry, QC checks on discrepant materials, production and quality reporting, filing and maintaining paperwork, etc. Assist with any other duties and projects as required QUALIFICATIONS Must be proficient in gauging methods and procedures. Must maintain an excellent attendance record. Must be able to work independently without constant supervision and be able to work overtime as needed to cover absences. Must be proficient in the use of Microsoft Office Applications (Outlook, Excel, Word and Power Point at a minimum). Must have basic knowledge of or be trainable on Syteline. Must be able to wear prescribed safety equipment and promote a safe work environment. #1Anomatic

North Atlantic Industries is a leading provider of embedded electronic solutions, specializing in rugged embedded computing, power supplies and motion simulation and measurement technologies. Our products and services are used by the military, aerospace, and industrial markets, helping to advance technology and protect the free world. NAI was proud to be recognized as a Top Workplace on Long Island by Newsday! Our culture is very collaborative. We have team building events, company picnics, special event day and employee game room. Please visit our website at ******************** to see more about what makes us a unique place to work. Summary: As the Quality Control Inspector Level 2, you perform in-process and final inspections of electronic and mechanical assemblies, components, and systems to ensure compliance with North Atlantic Industries' quality standards and customer requirements. Your work directly supports product reliability, regulatory compliance, and the delivery of mission-critical electronics. Requirements * Inspect PCB assemblies, mechanical assemblies, and subassemblies for conformance to engineering drawings, specifications, and industry standards. * Perform in-process, first-article, and final inspections using microscopes, measurement tools, mechanical gauges, and electronic test equipment. * Document inspection results, nonconformances, and corrective actions clearly and accurately in NAI's quality management system. * Verify proper soldering quality, component placement, workmanship, and mechanical fitment to meet NAI's aerospace and defense industry requirements. * Inspect machined parts, enclosures, for dimensional accuracy and proper assembly. * Collaborate with Engineering, Production, and Quality teams to resolve technical issues and support continuous improvement initiatives. * Review and validate production documentation, including travelers, drawings, and work instructions, for completeness and accuracy. * Ensure ESD procedures, inspection protocols, and safety standards are strictly followed throughout the production environment. * Support root-cause analysis and assist with corrective and preventive actions (CAPA) as required. * Candidates must be a U.S. Person, defined as either a U.S. citizen or a lawful permanent resident (Green Card holder), and must be able to provide appropriate documentation upon hire to verify this status. Please note that some positions involve sensitive customer contracts and require U.S. citizenship as a condition of employment. Qualifications and Education Requirements: * High school diploma or equivalent required; technical certification or vocational training in electronics or mechanical technology preferred. * 4+ years of experience in quality inspection within the electronics, electromechanical, aerospace, or defense manufacturing industries. * Strong understanding of electronic components, PCB assembly processes, mechanical assemblies, and soldering principles. * Ability to read engineering drawings, schematics, and mechanical blueprints. * Proficiency with inspection tools such as calipers, micrometers, microscopes, height gauges, multimeters, and continuity testers. Preferred Skills and Abilities: * IPC-A-610 or IPC-A-620 certification. * Familiarity with AS9100 or ISO 9001 quality system requirements. * Strong attention to detail with the ability to identify defects in electronic and mechanical assemblies. * Effective communication skills and ability to collaborate with cross-functional teams. * Strong organizational and documentation abilities. North Atlantic Industries offers comprehensive and competitive packages including: Benefits * Medical, Dental, and Vision Insurance * Company-provided Life and AD&D Insurance * Voluntary Supplemental Life Insurance * Long-term Disability Insurance * Flexible Spending Accounts (FSA) * Employee Assistance Program (EAP) * 401(K) with company matching contributions * Vacation, holidays, sick * Employee tuition reimbursement * Annual bonus eligibility * Opportunities for learning and career development Work Schedule and Environment * Monday to Friday, Day Shift * Discretionary 9/80 Schedule * Business casual dress code Salary Description $25.00-$29.00 per hour

About CooperSurgical CooperSurgical is a leading fertility and women's healthcare company dedicated to putting time on the side of women, babies, and families at the healthcare moments that matter most in life. As a division of CooperCompanies, we're driven by a unified purpose to enable patients to experience life's beautiful moments. Guided by our shared values - dedicated, innovative, friendly, partners, and do the right thing - our offerings support patients throughout their lifetimes, from contraception to fertility and birth solutions, to women's and family care, and beyond. We currently offer over 600 clinically relevant medical devices to healthcare providers, including testing and treatment options, as well as an innovative suite of assisted reproductive technology and genomic testing solutions. Learn more at ********************** . Work location: Trumbull, CT (on-site) Scope: The Quality Control Inspector is responsible for inspecting components, subassemblies, and assemblies within the CooperSurgical Trumbull, CT facility. The Quality Control inspector will ensure components, subassemblies, and assemblies comply with approved specifications. Job Summary: The Quality Control Inspector is responsible for performing routine inspections of components, subassemblies, and finished products to ensure compliance with approved drawings, specifications, inspection plans, and regulatory requirements. This role supports product quality, safety, and effectiveness while maintaining compliance with current Good Manufacturing Practices (cGMP), FDA Quality System Regulations (21 CFR 820), and other applicable quality standards.

Under the direction of the inspection supervisor or leadperson(s), this individual must be able to perform inspection procedures on a variety of bearing components and finished assemblies. This individual must be able to read complex drawings and perform inspection operations as required using measuring instruments such as micrometers, verniers, dial indicators, and direct reading instruments such as air gages, plug gages and torque and radial clearance gages and Rockwell hardness tester. This person must be able to select the appropriate inspection instrument, perform inspection operations according to a specified sampling plan and prepare necessary paperwork when parts fail to meet print specifications. This individual will be responsible for reporting any discrepancies to either the leadperson(s) or the supervisor. Other responsibilities include keeping the workplace clean, moving work being inspected within the area of the workplace and performing any other reasonable duties as assigned by inspection supervision.

Hamilton Connections is seeking candidates for a quality control inspector operating at a manufacturing company in Danbury, CT. The quality control inspector is responsible for testing, evaluating and documenting the quality of manufactured products. The hours are 3:30 p.m.-12 a.m., Monday-Friday. The job pays $28-$32 an hour, depending on experience. Job Responsibilities: Perform first piece, final and first article inspections of products to inspect for damage and/or defects Use measuring tools like calipers, micrometers and gages to inspect products Measure products for accuracy according to blueprint specifications Maintain accurate documentation and reporting Other duties as assigned Job Requirements: 5 or more years of quality control experience, including first piece, final and first article inspections Experience with precision measuring instruments, including calipers, micrometers, height gages, plug gages and thread gages Able to read blueprints Coordinate Measuring Machines (CMM), vision system and/or optical comparator experience Geometric Dimensioning and Tolerancing (GD&T) experience Familiar with ISO procedures a plus Organized, responsible and self-driven High school diploma or equivalent Able to pass pre-employment screenings

The Quality Inspector will be responsible for performing inspections and ensuring compliance with quality standards for machined components and assemblies. This role requires strong knowledge of machining processes, precision measurement tools, and quality procedures to maintain product integrity and customer satisfaction. Key Responsibilities Perform in-process and final inspections on machined parts and assemblies. Verify dimensions using precision measuring instruments (calipers, micrometers, gauges, shadow graph). Interpret engineering drawings, blueprints, and specifications. Document inspection results and maintain accurate records in accordance with company procedures. Identify and report non-conformances; assist in root cause analysis and corrective actions. Ensure compliance with ISO 9001 and internal quality standards. Collaborate with production and engineering teams to resolve quality issues. Qualifications High school diploma or equivalent; technical certification preferred. Minimum 3 years of experience in quality inspection within a machining/manufacturing environment. Strong understanding of machining processes and tolerances. Proficient in the use of precision measuring tools and equipment. Ability to read and interpret technical drawings and GD&T. Familiarity with quality systems and documentation practices. Excellent attention to detail and problem-solving skills. Physical Requirements and Work Environment Ability to stand for extended periods, lift up to 25 lbs, and work in a manufacturing environment with exposure to noise and machinery. #LI-KP1

SIGN ON BONUS $2500 Advanced Quality Control Inspector Precision. Accountability. Technical Excellence. Straton Industries is seeking an Advanced Quality Control Inspector who sets the standard through the quality of their work. This is a senior, hands-on role with advancement opportunities earned through demonstrated capability, initiative, and results. The right candidate leads by example, earns trust through execution, and is motivated to grow into greater responsibility over time. This role is designed for a senior inspector who takes ownership of inspection quality, demonstrates sound judgment, and consistently follows through. Opportunities for increased responsibility exist over time and are based on demonstrated performance and readiness. Key Responsibilities: Perform advanced inspections on high-mix, tight-tolerance machined parts using both manual gaging and programmable inspection equipment Program and operate CMMs using PC-DMIS software ( required ) Interpret engineering drawings, specifications, and GD&T to verify conformance Take ownership of inspection quality by identifying issues early and ensuring accurate disposition Document inspection results clearly and accurately using required forms and systems Support deviation, nonconformance, and corrective action processes as required Follow established procedures, work instructions, standards, and customer-specific requirements Act as a technical resource through experience, judgment, and reliability. Required Skills and Experience: 7+ years of Quality Control experience in precision machining Proven experience programming and operating CMMs using PC-DMIS software ( required ) Strong working knowledge of GD&T (Geometric Dimensioning and Tolerancing) High proficiency with precision measurement tools, including comparators, microhites, micrometers, indicators, and similar equipment Demonstrated ability to work independently, make sound inspection decisions, and follow through Strong attention to detail with consistent, accurate documentation practices Strong ability to adapt to a fast-paced environment. Effective verbal and written communication skills Aerospace industry experience a plus Familiarity with quality standards such as AS9100 (preferred). Why Join Us? We offer a comprehensive benefits package, including: Medical, Dental, and Vision Insurance Life Insurance 401(k) with company match Paid Time Off and Holiday Pay A team-oriented workplace that values your expertise and contributions How to Apply If you're passionate about quality, detail-oriented, and ready to grow with an industry leader, we want to hear from you. Apply now by sending us your resume and let's start the conversation! Candidates must be authorized to work in the United States. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability status, protected veteran status, or any other characteristic protected by law .

Quality Inspector - Precision Parts | Direct Hire $17-$30 per hour, based on experience Love working with precision? Here's your chance to put your skills to the test! We're hiring a Quality Inspector to ensure every part meets exact standards. If you thrive on accuracy, this role is for you. What You'll Do: Inspect incoming, in-process, and finished metal parts Work with tight tolerances and detailed specifications Read and interpret blueprints / GD&T Play a key role in delivering top-quality products What You Bring: Hands-on inspection experience with close tolerances Strong GD&T and blueprint reading skills Stable work history in quality/manufacturing Aerospace background = big plus! Why You'll Love It: Direct hire opportunity Competitive pay: $17-$30/hr DOE Join a team that values precision and craftsmanship Your attention to detail could be exactly what we're looking for. Apply today and take your quality control career to the next level! A.R. Mazzotta is an equal opportunity employer. It is the policy of A.R. Mazzotta to employ, recruit, hire, train and promote individuals without regard to race, color, religious creed, sex, national origin, age, marital status, present or past history of mental disability, intellectual disability, learning disability, or physical disability, religion, political affiliation or belief, pregnancy, ancestry, veteran status, sexual orientation, gender identity or expression or any other status protected by federal, state, or local laws.

Job DescriptionQuality Inspector - Precision Parts | Direct Hire $17-$30 per hour, based on experience Love working with precision? Here's your chance to put your skills to the test! We're hiring a Quality Inspector to ensure every part meets exact standards. If you thrive on accuracy, this role is for you. What You'll Do: Inspect incoming, in-process, and finished metal parts Work with tight tolerances and detailed specifications Read and interpret blueprints / GD&T Play a key role in delivering top-quality products What You Bring: Hands-on inspection experience with close tolerances Strong GD&T and blueprint reading skills Stable work history in quality/manufacturing Aerospace background = big plus! Why You'll Love It: Direct hire opportunity Competitive pay: $17-$30/hr DOE Join a team that values precision and craftsmanship Your attention to detail could be exactly what we're looking for. Apply today and take your quality control career to the next level! A.R. Mazzotta is an equal opportunity employer. It is the policy of A.R. Mazzotta to employ, recruit, hire, train and promote individuals without regard to race, color, religious creed, sex, national origin, age, marital status, present or past history of mental disability, intellectual disability, learning disability, or physical disability, religion, political affiliation or belief, pregnancy, ancestry, veteran status, sexual orientation, gender identity or expression or any other status protected by federal, state, or local laws.

Nature and Scope The Manual Inspector Trainee is an entry level position responsible for the manual inspection of our products using visual methods to detect particulates in vials, liquid volume, defects, etc. Trainees must pass a Visual Inspection Qualification Test and pass qualifications to operate automated inspection equipment before becoming an Inspection Machine Operator I. Essential Duties and Responsibilities * Performs inspection of vial, ampoule, and syringe containers by hand (manually). * Accurately completes all documentation associated with tasks performed. * Keeps work area clean and orderly. * Follow directives issued by leads and supervisors. * Adheres to good manufacturing practices, (GMP & cGMP). * Perform duties according to the company's standard operating procedures, (SOPs). Education Requirements and Qualifications * High School Diploma or Equivalent required. * Must pass a Visual Inspection Qualification test within 89-day probationary period. This is a temporary position, in which candidate must complete the qualifications to become an Inspection Machine Operator I within 89 days. * Accurately read, write and count. * Able to work effectively with others. * Ability to work overtime as needed. Physical Environment and Requirements * Specific vision requirements include 20/20 near vision (can be corrected with eyeglasses or contacts) and color vision. * Able to stand and sit for extended periods. * Able to lift 10 pounds repeatedly (5-6 hours). * Able to lift 11-25 pounds occasionally (1-2 hours). Expected hourly rate: $19.27 The hourly rate displayed is the hourly rate for the role that the employer in good faith believes to be accurate at the time of the posting of an advertisement for the role. Actual compensation for the role will be based on a number of different factors including but not limited to the candidate's qualifications, education, knowledge, skills and experience. American Regent also offers a competitive total rewards package which includes healthcare, life insurance, profit sharing, paid time off, matching 401k as well as a wide range of other benefits. American Regent celebrates diversity and we are committed to creating an inclusive environment for all employees. We are an Equal Opportunity Employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability status, or protected veteran status. Applicants have rights under Federal Employment Laws. * FMLA poster: ********************************************************** * Know Your Rights: Know Your Rights: Workplace discrimination is illegal (eeoc.gov) * Employee Polygraph Protection Act: ********************************************************* Alert: We're aware of individuals impersonating our staff to target job seekers. Please note: * All legitimate communication will come directly from a verified ARI recruiter either by phone or via an americanregent.com email address. * Our recruiting process includes multiple in person and/or video interviews and assessments. * If you are unsure about the legitimacy of a message, contact John Rossini at *************************** before responding. * We never request payment, bank information, or personal financial details during our offer process. Your security is important to us, and we encourage you to stay vigilant when job searching. American Regent Inc. endeavors to make *********************************** accessible to any and all users. If you would like to contact us regarding the accessibility of our website or need assistance completing the application process, please email **************************************.

Hourly : 22.72 What do you get when you bring together a team of bright individuals and place them into an environment where “work” means making a difference in the lives of people across the globe? You get Sciolex Corporation, a fast-growing defense contractor focused on providing the U.S. Government a level of service that surpasses the epitome of excellence. Our core services include systems engineering technical advice, technical support, and administrative assistance. From our humble beginning as a small Service Disabled, Veteran Owned Small Business in Chantilly, VA, Sciolex Corporation is now the home for over 1,000 employees across the U.S. Over the past 19 years, Sciolex Corporation has constructed an environment that celebrates diversity and encourages a positive work/life balance, all while supporting government missions that our employees are proud to be a part of. When you work for Sciolex Corporation, you are working for a stable company that values you and is committed to ensuring you receive the utmost employee care. Responsibilities The Quality Control Inspector (QCI) supports the overall mission of the U.S. Citizenship and Immigration Services (USCIS) by facilitating the operations of a local Field Office. As a QCI, your responsibilities would include: Verifies compliance with work standards, SOPs, ROH, and other requirements documents, Pays particular attention to the timeliness and accuracy of work performed, Screens documents to determine accuracy of data contained in them and determines which need corrective action, Keeps various logs and uses random sampling to evaluate process efficiency, accuracy, and timeliness, Responsible for recognizing problems that might invalidate samples, investigating complaints, reviewing violations found by USCIS personnel, and preparing reports of findings and actions needed or taken, Recommends changes that will improve contract performance, Other duties as assigned. Qualifications & Physical Requirements High school diploma or equivalent Must be able to obtain a Public Trust/Suitability Clearance under the Department of Homeland Security from the United States Citizenship and Immigration Services Ability to read and understand proficiently in English Ability to lift and carry up to 45 lbs. or more in a physical environment Ability to perform tasks while bending, stooping, climbing, and reaching At Sciolex Corporation, our top priorities and most valuable resources are our employees, which is why we offer a competitive total compensation package. We are a proud Equal Opportunity Employer (EOE) who celebrates diversity in and out of our organization. Come see where your opportunities for success can flourish. NOTICE: Sciolex Corporation NEVER asks job applicants to issue any payment, service fees, or banking information to Sciolex Corporation or its recruiters as part of our application process. Before providing any personal information to outside parties, verify that the job you are applying for appears on our Careers site.

Job Description Quality Control Technician 6:00am - 4:30pm - Watertown, CT As a Quality Control Technician, you will be responsible for ensuring that all products meet the company's quality standards and specifications. This role involves inspecting materials, components, and finished products, identifying defects, and collaborating with the production team to address quality issues. Key Responsibilities: Perform inspections of incoming materials, in-process components, and finished products to ensure compliance with quality standards. Utilize precision measurement tools such as calipers, micrometers, and gauges to assess product dimensions and tolerances. Document inspection results and maintain accurate records of quality checks and test outcomes. Identify and report non-conformities, collaborating with relevant departments to implement corrective actions. Assist in the development and refinement of quality control procedures and protocols. Support continuous improvement initiatives by providing feedback on quality trends and potential areas for process enhancement. Ensure compliance with industry standards and regulatory requirements related to product quality. Qualifications: High school diploma or equivalent; associate degree in a related field preferred. Prior experience in quality control or inspection within a manufacturing environment. Proficiency in using measurement and testing equipment. Strong attention to detail and analytical skills. Ability to read and interpret technical drawings and specifications. Effective communication skills and ability to work collaboratively in a team setting. Working Conditions: Standing for extended periods and handling materials as required. Exposure to manufacturing environment with noise and machinery. Use of personal protective equipment (PPE) as required. Apply Today! This is an excellent opportunity to join a reputable manufacturer and pursue a position with long-term potential. Apply now to be considered by The Hire Source. Email us at **********************

About Us: Panelmatic, Inc. was founded in 1957 in Youngstown, OH to serve manufacturing industries with the design and build of custom electrical, instrument, and pneumatic control panels. Our business has sufficiently grown over the years to support expansion for our clients. We have produced control packages for many of America's top corporations in the chemical, environmental, food, pulp and paper, rubber, petroleum, pharmaceutical, glass, metals, and utility industries. We also deliver equipment for use worldwide. Our rigorous methodology assures compliance with domestic and international standards. We can meet the needs of our diverse clientele from start to finish through sales, design, fabrication, testing, and delivery. Since 1957, we have been known for our high-quality, custom-built control packages, our comprehensive service, and our technological and manufacturing expertise. This expertise assures you of our ability to handle the largest and most complex packages quickly and efficiently. Job Summary: Panelmatic is seeking a detail-oriented experienced Quality Control Inspector. In this role, you'll play a key role in ensuring that all products meet our established requirements for reliability and workmanship, as well as other quality control program standards. Job Duties: * Inspecting output samples using industry-appropriate methods, such as comparing to standards, measuring dimensions, and examining functionality, as well as electrical testing as required. * Checking that the assembly or production line adheres to standards and procedures and complies with legal requirements * Reviewing blueprints, electrical schematics, and specifications to compare to produced goods and generating an inspection report to document all deviations. * Recording inspection results by completing reports, summarizing re-works and wastes, and inputting data into a quality database * Assist in training the production team on quality control measures to improve product excellence * Proposing improvements to the production process * Monitoring the use of equipment to ensure it is safe and discard any that do not meet requirements * Updating job knowledge by engaging in educational opportunities and regular training * Keeping measurement equipment operating accurately by following calibration requirements and calling for repairs * Reading and interpreting engineering drawings and electrical schematics. * Comprehension and operation of basic electrical measuring equipment. * Collecting and compiling statistical quality data * Assisting in the development of test methods and inspection plans * Determining the causes of product defects and reworks * Verifying all equipment is calibrated correctly * Understanding the functionality of basic electrical components for use in industrial electrical cabinets/panels. * Coordination and Support of customers during the FAT process. Minimum Qualifications: * Associates degree required * One year of experience with electrical inspection and testing required * Good written and verbal communication skills required * Excellent problem-solving and analytical skills required * Keen attention to detail required * Basic computer and math skills to calibrate and measure specifications required * Ability to use measuring devices such as gauges, meters, calipers, and computers required * In-depth understanding of company standards required * Up-to-date knowledge of federal and industry standards, UL codes, and best practices required * Understanding of target market and consumer needs required * Blueprint and electrical schematic reading capabilities required * Documentation and reporting skills required * Teamwork and collaboration required * Growth mindset with the ability to accept challenges required * Ability to pass physical, drug, driving, and background check required * Ability to physically push, pull, and lift 50lbs or more required * Ability to sit, stand, and walk for four-plus hours at a time required * Alignment with company core values required Preferred Qualifications: * Two plus years of experience with electrical inspection and testing preferred * A BS in Engineering or equivalent work experience preferred * Experience in an ISO environment preferred * Experience in Lean/Six sigma preferred Benefits: * Medical, dental, vision, HSA, term life, AD&D, STD, LTD * 100% medical premium paid for by Panelmatic for the employee-only level medical coverage * 80% paid for by Panelmatic and 20% paid for by the employee on all other level medical coverage (i.e. employee plus child, employee plus spouse, family) * 401K and bonus * Scholarships, educational reimbursement, paid volunteerism, and paid personal and professional development provided * PTO and paid holidays provided * Career advancement opportunities * Competitive wages * Family-friendly environment with average employee tenure above five years

Full-time Description North Atlantic Industries is a leading provider of embedded electronic solutions, specializing in rugged embedded computing, power supplies and motion simulation and measurement technologies. Our products and services are used by the military, aerospace, and industrial markets, helping to advance technology and protect the free world. NAI was proud to be recognized as a Top Workplace on Long Island by Newsday! Our culture is very collaborative. We have team building events, company picnics, special event day and employee game room. Please visit our website at ******************** to see more about what makes us a unique place to work. Summary: As the Quality Control Inspector Level 2, you perform in-process and final inspections of electronic and mechanical assemblies, components, and systems to ensure compliance with North Atlantic Industries' quality standards and customer requirements. Your work directly supports product reliability, regulatory compliance, and the delivery of mission-critical electronics. Requirements Inspect PCB assemblies, mechanical assemblies, and subassemblies for conformance to engineering drawings, specifications, and industry standards. Perform in-process, first-article, and final inspections using microscopes, measurement tools, mechanical gauges, and electronic test equipment. Document inspection results, nonconformances, and corrective actions clearly and accurately in NAI's quality management system. Verify proper soldering quality, component placement, workmanship, and mechanical fitment to meet NAI's aerospace and defense industry requirements. Inspect machined parts, enclosures, for dimensional accuracy and proper assembly. Collaborate with Engineering, Production, and Quality teams to resolve technical issues and support continuous improvement initiatives. Review and validate production documentation, including travelers, drawings, and work instructions, for completeness and accuracy. Ensure ESD procedures, inspection protocols, and safety standards are strictly followed throughout the production environment. Support root-cause analysis and assist with corrective and preventive actions (CAPA) as required. Candidates must be a U.S. Person, defined as either a U.S. citizen or a lawful permanent resident (Green Card holder), and must be able to provide appropriate documentation upon hire to verify this status. Please note that some positions involve sensitive customer contracts and require U.S. citizenship as a condition of employment. Qualifications and Education Requirements: High school diploma or equivalent required; technical certification or vocational training in electronics or mechanical technology preferred. 4+ years of experience in quality inspection within the electronics, electromechanical, aerospace, or defense manufacturing industries. Strong understanding of electronic components, PCB assembly processes, mechanical assemblies, and soldering principles. Ability to read engineering drawings, schematics, and mechanical blueprints. Proficiency with inspection tools such as calipers, micrometers, microscopes, height gauges, multimeters, and continuity testers. Preferred Skills and Abilities: IPC-A-610 or IPC-A-620 certification. Familiarity with AS9100 or ISO 9001 quality system requirements. Strong attention to detail with the ability to identify defects in electronic and mechanical assemblies. Effective communication skills and ability to collaborate with cross-functional teams. Strong organizational and documentation abilities. North Atlantic Industries offers comprehensive and competitive packages including: Benefits Medical, Dental, and Vision Insurance Company-provided Life and AD&D Insurance Voluntary Supplemental Life Insurance Long-term Disability Insurance Flexible Spending Accounts (FSA) Employee Assistance Program (EAP) 401(K) with company matching contributions Vacation, holidays, sick Employee tuition reimbursement Annual bonus eligibility Opportunities for learning and career development Work Schedule and Environment Monday to Friday, Day Shift Discretionary 9/80 Schedule Business casual dress code North Atlantic Industries (NAI) is proud to be an Equal Opportunity Employer and is committed to providing equal employment opportunity for all persons in all facets of employment. All qualified applicants will receive consideration for employment without regard to any legally protected status. If you are an individual with a disability or a disabled veteran and require a reasonable accommodation in applying for any posted position, please contact Human Resources at ************ or by email at ***********. As a federal government contractor, in accordance with applicable laws, regulations, and Executive Orders, North Atlantic Industries (NAI) is required to develop annual Affirmative Action Plans for Protected Veterans and Individuals with Disabilities. Any employees or applicants who wish to review the Affirmative Action Plan for Protected Veterans and Individuals with Disabilities can contact us by sending an email to *********** or by calling ************. Salary Description $25.00-$29.00 per hour

Job Description Quality Control Inspector - 1st Shift

Entry- Level Quality Control Inspector (Manufacturing - Rubber Products) Portland, CT Monday-Friday | 7:00 AM - 3:30 PM$20-$22/hour (Depending on Experience) We are currently assisting a manufacturing client in Portland, CT with hiring a Quality Control Inspector to support daily inspection activities and ensure product quality standards are consistently met. This is a great opportunity for someone with hands-on quality inspection experience who enjoys working independently in a production environment. Key Responsibilities Perform visual and dimensional inspections on in-process and finished products Use precision measuring tools including calipers, micrometers, and gauges Verify product compliance to prints and specifications (basic blueprint reading) Accurately complete inspection paperwork, logs, and quality documentation Enter inspection data into Excel or internal quality systems Communicate quality issues clearly with production and leadership teams Qualifications Prior experience in a manufacturing or production environment Hands-on experience with quality control or inspection Ability to read basic blueprints and specifications Strong attention to detail and documentation accuracy Reliable, dependable, and able to work independently Apply today if you have quality inspection experience and are looking for your next manufacturing opportunity. Qualified candidates will be contacted to discuss next steps. A.R. Mazzotta is an equal opportunity employer. It is the policy of A.R. Mazzotta to employ, recruit, hire, train and promote individuals without regard to race, color, religious creed, sex, national origin, age, marital status, present or past history of mental disability, intellectual disability, learning disability, or physical disability, religion, political affiliation or belief, pregnancy, ancestry, veteran status, sexual orientation, gender identity or expression or any other status protected by federal, state, or local laws.

Job DescriptionEntry- Level Quality Control Inspector (Manufacturing - Rubber Products) Portland, CT Monday-Friday | 7:00 AM - 3:30 PM$20-$22/hour (Depending on Experience) We are currently assisting a manufacturing client in Portland, CT with hiring a Quality Control Inspector to support daily inspection activities and ensure product quality standards are consistently met. This is a great opportunity for someone with hands-on quality inspection experience who enjoys working independently in a production environment. Key Responsibilities Perform visual and dimensional inspections on in-process and finished products Use precision measuring tools including calipers, micrometers, and gauges Verify product compliance to prints and specifications (basic blueprint reading) Accurately complete inspection paperwork, logs, and quality documentation Enter inspection data into Excel or internal quality systems Communicate quality issues clearly with production and leadership teams Qualifications Prior experience in a manufacturing or production environment Hands-on experience with quality control or inspection Ability to read basic blueprints and specifications Strong attention to detail and documentation accuracy Reliable, dependable, and able to work independently Apply today if you have quality inspection experience and are looking for your next manufacturing opportunity. Qualified candidates will be contacted to discuss next steps. A.R. Mazzotta is an equal opportunity employer. It is the policy of A.R. Mazzotta to employ, recruit, hire, train and promote individuals without regard to race, color, religious creed, sex, national origin, age, marital status, present or past history of mental disability, intellectual disability, learning disability, or physical disability, religion, political affiliation or belief, pregnancy, ancestry, veteran status, sexual orientation, gender identity or expression or any other status protected by federal, state, or local laws.