Inspector jobs in Plainview, NY

JSG is interested in speaking with Inspector withelectrical and mechanical Inspection experience. This is a direct hire position with our top client in East Setauket, NY. Pay for this role is $24-27hr with full benefits. The shift is 1st shift (6:45am to 3:30pm). The Inspector will verify and document any discrepancies, damages, or shortages. Conduct visual and measurement tests and reject and return unacceptable materials using calipers, micrometers, height gauges, etc. Also regularly calibrate tools and equipment to ensure accuracy and reliability. The ideal candidate possesses the below additional experience; 3+ years of electrical and mechanical inspection experience Excellent accuracy/attention to detail, ability to work independent and adhere to deadlines as well as high volume work Must be US Citizen or Perm resident Experience with First Article Inspection (FAI) report in accordance with AS9102 IPC-610 certification preferred, but not required Please apply if you are ready to work ASAP with a fast-growing Production Company! Johnson Service Group, Inc. (JSG) is a North American leader in the staffing and consulting services industry, with over 35 years of experience investing in people and companies. Johnson Service Group (JSG) is an Equal Opportunity Employer. JSG provides equal employment opportunities to all applicants and employees without regard to race, color, religion, sex, age, sexual orientation, gender identity, national origin, disability, marital status, protected veteran status, or any other characteristic protected by law. #D400

Cox & Company is a 100% employee-owned company, which has been in continuous business operation for more than 70 years. Our staff includes both world-renowned and highly experienced engineers in the fields of aerodynamics, thermal sciences, software, and mechanical and electrical design, including CATIA and AUTOCAD. All of our customers receive the personal dedication and service associated with a small business environment coupled with the resources and facilities of a large organization. Cox is an engineering-driven manufacturer and an industry leader in the design, development, test and manufacture of low power ice protection systems and temperature control products and systems. From hydraulic line heaters that were used on the Lunar Module to low power ice protection systems installed on the Boeing P-8A, Lear Jet 200, Northrop Grumman BAMS UAV and the HondaJet, Cox products continue to set new standards for excellence and innovation in the aerospace industry. At the heart of our company is a team of engineers and scientists that can solve any ice protection or heat-related challenge on commercial, business, and military aircraft, both fixed and rotary wing. Working closely with engineers within the customer's organization, we are able to fully integrate our products and systems effortlessly into both new and existing aircraft platforms. The sooner you contact us, the sooner you can relax in the knowledge that you are dealing with a world class leader who will not rest until you are 100% satisfied with the final design solution Job Description Summary: I nspector of optical, electrical, and mechanical assemblies, and related interface assemblies. Inspector to read work instructions, review drawings, and perform inspections of sub-assemblies and finished assemblies, recording the results of the output of inspections and tests. Job duties: • Perform mechanical/visual inspection in accordance with acceptance test plans (ATP) • Operate various standard testing instruments with use of specific test equipment. • Read assembly specifications, such as work instructions, charts, drawings, diagrams, and engineering specifications, and understand requirements. • Document test results and closely interact with engineering development teams, manufacturing, and quality assurance representative. • May support engineering development testing and/or research and development activities. • Recommend testing procedures and potential product improvements • Mark items for acceptance or rejection, record test results and inspection data and compare findings with specifications to ensure conformance to standards • Dispositions, discards, rejects product or materials not meeting required specifications • Perform in accordance with AS9100 Qualifications Qualifications Degree in optical, electrical, or quality control discipline CQI Certification (in lieu of education): American Society for Quality (ASQ) Certified Quality Inspector Preferably, three to five (3-5) years' experience in quality control as an inspector Thorough knowledge of quality control standards and testing methodologies (IPC610, IPC-620) Optical testing experience in a high technology environment preferred Familiarity with optical measuring equipment such as, photometer and spectroradiometer. Familiarity with shop procedures including recording results on production travelers, and MRP systems. Proven ability to understand technical drawings and manufacturing instructions. Experience with clean-room working practices. Effective written/verbal communication skills and computer skills (Windows, Microsoft Office) Must have US person status for this position. [ Pursuant to EAR and the ITAR, U.S. Person includes any individual who is granted U.S. citizenship; or any individual who is granted U.S. permanent resident (“Green Card” holder); or any individual who is granted status as a “protected person” under 8 U.S.C. 1324b(a)(3).] Additional Information All your information will be kept confidential according to EEO guidelines.

The Quality Inspector will complete visual inspection of printed card assemblies and sub-assemblies. They will review paperwork, complete computer entry, read and interpret drawings and documents. They will interface with production line and visiting customers. They will also work in clean room environments. Required Skills Good written and verbal communication skills. Problem solving and analytical skills a plus. Keen attention to detail. Basic computer and math skills to measure specifications. Ability to use measuring devices such as gauges, meters, calipers and computers. Experience with workmanship specifications JSTD-001 and IPC-610 certifications required MIL-STD 38534, MIL-STD 38535 preferred EOE/Disability/Veteran This position is onsite We offer a comprehensive benefit package including: Health Insurance, Dental and Vision, Life Insurance, Short and Long-Term Disability. Flexible spending option and 401K. We also offer paid time off including: Vacation, Sick and Paid Holidays

ICC Mechanical Inspector Employment Type: Full-Time Why Join AEIS? At AEIS, we do more than inspect - we build confidence in the world around us. Our work supports infrastructure, innovation, and the future of our communities. We value craftsmanship, teamwork, and continuous improvement, and we invest in the people who share those values. Here, your career is a path - not a position. AEIS professionals grow into QA Leads, Technical Specialists, and Project Leaders who shape the future of construction quality. 👉 Learn more: ************ Training & Growth That Matters AEIS operates a full in-house NDT & Technical Training Program covering MT, UT, Hardness testing, and more. Whether you're building new skills or enhancing your expertise, you'll find hands-on support, mentorship, and real career mobility. Position Overview - Mechanical Inspector We're looking for an ICC Certified Mechanical Inspector to support our expanding portfolio of infrastructure projects. In this role, you'll play an essential part in ensuring quality, durability, and compliance across field inspections, testing, and project execution. What You'll Do Technical & Field Inspection Conduct inspections of HVAC, piping, ventilation, plumbing, and fuel gas systems Evaluate compliance with ICC, NYC Mechanical, Electrical and Plumbing Codes, and project specifications Verify sizing, installation, and operations of MEP systems and components Submit daily inspection reports within Maintain 90%+ completion of all assigned safety training Target zero avoidable safety or equipment incidents Submit 98% of draft reports within 8 hours - with minimal revisions Maintain 95% on-time site check-in/check-out Less than 1 serious issue per quarter related to Inspections, Measuring, and Test Equipment due to technician error, lack of maintenance, or lost/damaged equipment Documentation & Quality Records Maintain accurate inspection records using AEIS digital reporting tools Review and verify technical documents (e.g., WPS/PQR, lab results, etc.) Collaboration & Continuous Improvement Work closely with Project Managers, Engineers, and QA/QC Specialists Contribute to lessons-learned discussions and workflow improvements What We're Looking For Must Haves ICC Commercial Mechanical Inspector Certification (Active) Minimum 3 years of experience in building systems inspection or related field Familiarity with NYC Mechanical, Plumbing, and Fuel Gas Codes OSHA 30 Construction Safety Training (or ability to obtain) Strong communication and attention to detail Willingness to travel to project sites Bonus Points Experience with MEP inspections on commercial infrastructure, or institutional projects Multi-discipline inspection certifications (Plumbing, Fuel Gas, Fire Proofing, Firestopping, Masonry, Anchors) Familiarity with DOB and public agency documentation requirements Why This Role Stands Out Direct collaboration with AEIS Metallurgy & NDT Labs Access to internal certification programs Work alongside PEs, senior inspectors, and technical experts Competitive pay aligned with certifications & experience Clear growth pathway to QA Lead and Technical Specialist Supportive, inclusive, and professional team culture Salary Range: $40-48/hour This range is based on national market data and may vary widely by experience and location. Benefits 401(k) with company contribution Health, Dental & Vision Insurance Paid Time Off (PTO) Family Leave Professional development & certification support Employee referral bonuses Parking and transit benefits Tuition reimbursement Company sponsored discounts (Verizon) Cross-training & internal mentorship opportunities Ready to Apply? You can email us directly with your resume (PDF) to: ************* Subject: [Job Title] Application - [Your Name] A member of our hiring team will follow up - including the opportunity to visit our South Plainfield Technical Lab. Equal Opportunity Employer AEIS is an equal opportunity employer and does not discriminate with respect to any term, condition or privilege of employment based on race, color, religion, sex, sexual orientation, gender identity or expression, age, disability, military or veteran status, marital status, or status of an individual in any group or class protected by applicable federal, state, or local law. Employment Authorization Applicants must be authorized to work for any employer in the United States. We are unable to sponsor or take over sponsorship of an employment Visa at this time.

Arcadis is the world's leading company delivering sustainable design, engineering, and consultancy solutions for natural and built assets. We are more than 36,000 people, in over 70 countries, dedicated to improving quality of life. Everyone has an important role to play. With the power of many curious minds, together we can solve the world's most complex challenges and deliver more impact together. Role description: Do you enjoy working outdoors? Do you enjoy work that benefits the community by making the world a greener place? Join our dynamic team of Arborists, Engineers and Construction Management Specialists as we work together to improve the green infrastructure of NYC! We are seeking to hire multiple Landscape Construction Inspectors to join our team to work on projects for NYC Parks within the five boroughs of NYC. This position will work full-time, with intermittent opportunities for overtime. This position will utilize your technical knowledge and experience to help guide the City's tree preservation and street tree programs. As you grow with Arcadis, you will become involved with other NYC Parks' programs, and with other City agencies, all with a focus on the City's urban forest and other natural systems such as the Staten Island Bluebelt and park restoration projects. Role accountabilities: As a Landscape Construction Inspector, you will conduct daily inspections, supervise, and control construction activities to ensure the overall safety of the site, compliance with permit conditions, and coordination with other city agencies is being maintained. You will closely monitor and supervise the performance of the contractors to ensure they adhere to technical requirements and maintain a high level of responsiveness and effectiveness. Construction work includes but is not limited to excavation, tree planting, stump and tree removals, concrete restorations, and saw cutting operations. In addition, you will be responsible for conducting on-site measurements, tracking quantities, and performing design work before and during the construction process. These tasks will help you accurately assess the progress and quality of the project. You will regularly report to the resident engineer, project lead, and professional engineer (PE) overseeing the programs to keep them informed. This will ensure effective communication and decision-making throughout projects. You will be required to maintain daily, weekly, and expert tracking records, as well as responsible for verifying quantities and line items in the field with contractors and clients. Holding and attending field meetings with both the contractor and owner to discuss progress, schedules, and work remaining will be imperative to ensuring work progress proceeds in a timely manner. You will need to function as an ambassador for the city's urban forest resources during interactions with the city's residents and landowners, and will administer all health and safety (H&S) procedures as necessary. This role directly relates to construction and maintenance activities of and around NYC Street and Park Trees. Participation in a green infrastructure mentorship program is required where you will gain valuable knowledge and skills related to environmentally friendly construction practices, allowing you to contribute to sustainable and eco-conscious initiatives Qualifications & Experience: Bachelor of Science degree in forestry, arboriculture, horticulture, or related plant science field 1 or more years' of professional industry experience in tree protection, pruning, installation and establishment, or other services that directly relate to the work of the contract Skills in Microsoft 365 Suite, especially Microsoft Excel and Microsoft SharePoint. Key Skills / Attributes: Excellent communication skills both verbal and written and ability to work both independently and within a diverse team representing Arcadis and/or our client Agencies in interactions with the client, local agencies, and the community. Demonstrate a basic understanding of tree biology, tree establishment, and general landscape construction work. Proficient at reading and understanding design plans, specifications, and shop drawing submittals. Ability to be mentored and understand green infrastructure in NYC. Preferred Qualifications: ISA Certified Arborist ISA TRAQ Capital Contract Supervision Oversight Construction/Restoration Oversight OSHA 10 Certification Continue your career journey as an Arcadian. We can only achieve our goals when everyone is empowered to be their best. We believe everyone's contribution matters. It's why we are pioneering a skills based approach, where you can harness your unique experience and expertise to carve your career path and maximize the impact we can make together. You do meaningful work, and no matter where your next role in Arcadis takes you, you'll be helping to deliver sustainable solutions for a more prosperous planet. Make your mark; on your career, your colleagues, your clients, your life and the world around you. Together, we can create a lasting legacy. Our Commitment to Equality, Diversity, Inclusion & Belonging We want you to be able to bring your best self to work every day which is why we take equality and inclusion seriously and hold ourselves to account for our actions. Our ambition is to be an employer of choice and provide a great place to work for all our people. We are an equal opportunity and affirmative action employer. Women, minorities, people with disabilities and veterans are strongly encouraged to apply. We are dedicated to a policy of non-discrimination in employment on any basis including race, creed, color, religion, national origin, sex, age, disability, marital status, sexual orientation, gender identity, citizenship status, disability, veteran status, or any other basis prohibited by law. Arcadis offers benefits for full time and part time positions. These benefits include medical, dental, and vision, EAP, 401K, STD, LTD, AD&D, life insurance, paid parental leave, reward & recognition program and optional benefits including wellbeing benefits, adoption assistance and tuition reimbursement. We offer nine paid holidays and 15 days PTO that accrue per year. The salary range for this position is $33.00-$36.00/HR. Actual salaries will vary and are based on several factors, such as experience, education, budget, internal equity, project and location.

Job Description Immediate opening is available for full-time Mechanical Inspectors, 1st Class and 2nd Class for Production and Final Quality Inspection in Farmingdale. NY. Responsibilities include monitoring, measuring, and documenting the characteristics of products as compared to product requirements and prevent non-conforming product. This position will work with machined and fabricated metal products at various stages in our manufacturing processes including final Quality Inspection. We are seeking individuals with excellent interpersonal skills and operational expertise to join our production team. Essential Duties and Responsibilities include the following: - Monitor and measure the characteristics of products at appropriate stages of product realization. - Document and analyze the conformity of product to required specifications - Cooperate with manufacturing to prevent non-conforming product and continuously improve processes. Supervisory Responsibilities: This job has no supervisory responsibilities. Balances team and individual responsibilities; Gives and welcomes feedback; Puts success of team above own interests. - Written Communication - Excellent command of the written English language; Writes clearly and informatively; Varies writing style to meet needs; comprehends and applies proper email etiquette; presents numerical data effectively; able to read and interpret complex written information (customer specification manuals, contracts, etc). - Problem Solving -- identifies and resolves problems in a timely manner; gathers and analyzes information and data skillfully; develops alternative solutions; works well in group problem solving situations. Requirements Education and/or Experience: A high school diploma or equivalent. The preferred candidate will have: - Experience with Measuring and Testing Equipment including CMM equipment. - Ability to read and interpret part drawings, product specifications, and other related documentation. Must understand Geometric Dimensioning and Tolerances (GD&T) to product inspection Qualifications / Requirements: - Must be a detail-oriented, communicator, able to prioritize tasks and able to work under pressure with multiple deadlines. - Must be able to use all standard measuring instruments and CMM equipment. - While performing the duties of this Job, the employee is regularly required to sit; use hands to type, handle and feel. Employees must be able to communicate effectively through talking and listening. The employee is occasionally required to stand; walk, and reach, lift and carry objects weighing up to 25 lbs with hands and arms.

Job DescriptionDescriptionA great place to work and grow, Naik Group is a dynamic, multi-discipline engineering company with offices in New York and New Jersey. Our continued growth in this highly competitive market is evidence of the trust and value clients place in our services' quality and timeliness. Included in the full range of professional services we offer are Bridge/ Structural Design & Inspection, Highway/Roadway Engineering, Civil/Site Engineering, Traffic Engineering/ITS, Utility Engineering, Construction Management & Inspection, Design Build, Survey, Right of Way, and High Definition 3-D Laser Scanning. Our principals take considerable pride in their approach to the firm's management, offering services like that of a large organization while demonstrating the personal client and consultant relationship of a small firm. Naik Consulting Group is currently seeking a Junior Inspector. Naik is a New York-New Jersey engineering services firm which specializes in engineering design, field inspection, and Project Management/Construction Management, primarily in the transportation infrastructure industry. Responsibilities Monitors contractor operations and verifying conformance with project plans and specifications Serves as the on-site inspector for construction work performed by the contractor and subcontractors. Interacts with the construction contractor's site supervision on field activities to ensure compliance with the construction contract requirements Prepares daily reports, correspondence, change orders, periodic payment estimates, and quantity computations Observes details of work performed by others, documenting results; obtaining photographic documentation of work performed Confirms compliance with technical documents and industry-specific standards and codes Reviews and downloads field data into laptop computer and transfer to company server Discusses projects with project team on a daily basis Makes accurate judgment-calls on a variety of construction field activities Performs other like duties, as assigned Qualifications Bachelor's degree in Structural, Civil, Mechanical, or Electrical Engineering, Construction Management, or related field of study 0 to 3 years of experience OSHA 30-hour safety course is a plus MTA Track Safety Certification is a plus Excellent written and verbal communication skills Good time-management skills Ability to perform under pressure Good skills in Microsoft Excel, Word and Powerpoint A strong attention to detail is necessary. BenefitsNaik offers a competitive compensation package including: Holiday and paid-time-off programs 401(k) Plan and Match Career Path Development Program (Management & Technical Career Tracks) Tuition Reimbursement Competitive health and dental insurance premiums Short-Term Disability/Long-Term Disability Life insurance Employee Assistant Program (EAP) Flexible Spending Account and More Naik is a Drug and Alcohol-Free workplace, an Equal Employment Opportunity employer and E-Verify employer. We are committed to pay transparency and fairness in hiring. This posting complies with the Pay and Benefit Transparency Laws, which requires employers to disclose compensation and benefits information in all job advertisements.

A Manufacturing client of ours is seeking an inspector with a mechanical/machine shop background. Salary:$30/hr Perks/Benefits Sign on bonus $3,000 - $6,000 Pay: 25-28/hr (occasional overtime) Plus Annual bonuses Benefits: Medical, Dental, Vision 2 weeks of vacation 5 days sick leave Requirements Machine Shop Inspector background needed Must be able to find true center of product Experienced in GD&T (Geometric, Dimension and Tolerance) Must be able to read blueprints and drawings- this will be critical to inspecting on a day to day basis High school diploma Tech school a PLUS 2+ years in inspections and calibrations (preferably in aerospace); BONUS if you have quality experience Experience with the following Equipment: Vernier calipers Height gauges Micrometers Small hand tools Interested candidates are encouraged to apply!

Job Description Schivo Medical, located in Plainview , NY, is a contract manufacturer that make medical components that enhance and save people lives. ***We are hiring a quality control inspector with knowledge in the manufacturing of medical and surgical tools*** Quality Control Inspector Job Overview: Quality Control related tasks such has verifying components that are produced to print and relate the results to appropriate personal. Quality Control Inspector Knowledge, Skills and Abilities Required: Perform in-progress inspection for all machined components. Operate CMM machines, Keyence and visions systems Review operator inspection reports and traveler information. Submit reports to shift supervisor and communicate the results to machine operators. Perform First Article Inspection for new parts (set ups) Follows established departmental policies, procedures, and objectives, continuous quality improvement objectives, and safety, environmental, control standards. Detail knowledge of inspection techniques, tools and methodology Experience using measuring tools a plus Ability to read and interpret engineering drawings and blueprints Must possess the ability to use a wide variety of measuring devices to perform dimensional inspection of components produced. Must be dependable and possess a willingness to learn new techniques. Medical and Aerospace manufacturing experience with emphasis on FAIR Follow the quality standards of ISO-13485 Knowledge of GD& T helpful Minimum Job Requirements & Education* Completed AAS degree(s) from an accredited institution that are above the minimum education requirement may be substituted for experience on a year for year basis. Concentration on taking classes based in quality and metrology plus High school diploma or GED; at least 2 years of experience in a CNC Manufacturing environment Benefits:* 401(k) 401(Match) Dental insurance Health insurance Vision insurance Generous Paid time off EAP Program Employee referral ******Must be authorized to work in the United States********* Schivo Medical is an Equal Opportunity Employer. All qualified applicants will receive employment consideration without regard to race, color, age, sex, sexual orientation, gender identity, religion, national origin, genetic information, disability, or protected veteran status.

Build your career while building NYC schools! The Construction Inspection Division (CID) inspects the installation of materials and equipment on SCA projects to verify that the contractors install these systems as per the SCA plans, specifications and relevant codes. CID is organized into units as follows: Plumbing, Fire Suppression, Boiler/Fuel Burning Inspection Unit; Electrical and Heating, Ventilating, and Air Conditioning (HVAC) Unit; Roofing, Masonry and Sheet metal Inspection Unit; and the Civil, Architectural, Window and Door Inspection Unit. CID works closely with Architecture & Engineering (A&E), Construction Management and Building Code Compliance to ensure that the SCA receives a quality product. SummaryThe Technical Inspector is responsible for inspecting regulatory documentation and field construction sites/facilities to ensure compliance with relevant construction documents, codes and standards. Technical inspectors assist Project Officers by completing inspection reports that identify deficiencies in the work that needs to be corrected. Some inspectors also assist Project Officers prior to the start of construction to help clarify SCA requirements and specifications and make recommendations for improvement. Some review and accept regulatory documents required for the closeout process.Job Description Position Requires NYC Master Plumbers License Responsibilities include: Interprets complex plans and specifications; confers with Engineers, Architects and Project Officers. Assists & advises Project Management, Expediters, applicants, contractor/sub-contractors & Construction Manager's. Prepares detailed inspection reports that are transmitted to the Project Officers. Maintains computerized records of files & reports on the progress of projects (i.e., CIP and line). Inspects field construction sites/facilities to ensure compliance with relevant codes and standards and makes checks of work in progress. Makes periodic visits to projects and makes final inspection of completed work. Maintains updated information on all relevant codes, specifications, State and local laws, etc. Reviews regulatory documents required for the closeout process. Assists Plan Examiners/Engineers to achieve signoffs. Occasionally attends training in inspection techniques relating to acceptability of materials, methods, and work performed. Reviews laboratory tests to ensure that materials meet specifications; performs inspections. Performs related duties. There are seven Technical Inspector specialties: Architectural/ Civil Electrical Heating, Ventilation, Air Conditioning (HVAC) Boiler/fuel oil storage Plumbing (Requires Master Plumbers License) Roofing, Masonry, Sheet Metal Regulatory Civil Service Classification: Competitive Technical Inspector Shift Required: Evening Shift Only 12pm - 8pm Posting End Date: Open Until Filled Salary: Appointment Rate (New SCA Hire): $81,878 - $120,520 Incumbent Rate: $94,160 - $138,598 Position Requires NYC Master Plumbers License Subject to the provisions of the Collective Bargaining Agreement, the appointment rate for any newly hired employee, or employees with less than two years of active City or SCA service, shall be 15% less than the applicable incumbent rate or step. EducationHigh school diploma or its educational equivalent Certifications (if required) Work ExperienceThree years of relevant building construction experience; must have been working in any of the following areas; inspection, quality assurance, electrician, plumber, HVAC, roofing, masonry, architectural/civil, windows and doors, regulatory documentation, etc. or a satisfactory combination of education and experience. Must have three years of experience in the specialty area to which you are applying. The Plumbing specialty requires a license.(1) Architectural/ Civil;(2) Electrical;(3) Heating, Ventilation, Air Conditioning (HVAC);(4) Boiler;(5) Plumbing;(6) Regulatory. It is the policy of the New York City School Construction Authority (NYCSCA) to provide equal employment opportunity (EEO) to all persons regardless of age, color, national origin, citizenship status, physical or mental disability, race, religion, creed, gender, sex, sexual orientation, gender identity and/or expression, genetic information, marital status, veteran status, or any other characteristic protected by federal, state, or local law. In addition, the NYCSCA will provide reasonable accommodations for qualified individuals. We offer exceptional benefits including: * Medical (100% employer paid for basic coverage available) * Prescription Drug Options * Dental & Vision Coverage * NYC Qualified Pension Plan (QPP) * Optional Retirement Savings Plans including 401K, 457 and IRA options * Transit Check Program * Public Loan Forgiveness Program * Competitive Paid Time Off (PTO) Benefits As part of our ongoing commitment to employee growth and development, the SCA's Learning and Development (L&D) program offers a variety of valuable benefits. These include tuition reimbursement for continued education that is directly related to your current role, as well as access to a broad range of individual and organizational training opportunities. Trainings on leadership development, technical skill-building, compliance, personal and professional growth. These programs are designed to strengthen performance, boost engagement, and ensure our workforce is fully equipped to meet both current and future organizational goals. The SCA is interested in qualified candidates who are eligible to work in the United States. The SCA is not able to sponsor or take over sponsorship of an employment Visa at this time. We participate in the federal E-Verify program to confirm the identity and employment authorization of all newly hired employees. For further information about the E-Verify program, please click here: **********************************

Under the direction of the inspection supervisor or leadperson(s), this individual must be able to perform inspection procedures on a variety of bearing components and finished assemblies. This individual must be able to read complex drawings and perform inspection operations as required using measuring instruments such as micrometers, verniers, dial indicators, and direct reading instruments such as air gages, plug gages and torque and radial clearance gages and Rockwell hardness tester. This person must be able to select the appropriate inspection instrument, perform inspection operations according to a specified sampling plan and prepare necessary paperwork when parts fail to meet print specifications. This individual will be responsible for reporting any discrepancies to either the leadperson(s) or the supervisor. Other responsibilities include keeping the workplace clean, moving work being inspected within the area of the workplace and performing any other reasonable duties as assigned by inspection supervision.

Job DescriptionBenefits: 401(k) matching Dental insurance Health insurance Paid time off Training & development Vision insurance This job is located at Newark/Teterboro Airports in NJ. SCOPE Primarily building concrete work, civil site work, paving work, drainage systems, hydrant fuel systems, structural, and maintenance of traffic, with some electrical, environmental, and plumbing knowledge. REQUIREMENTS Willingness to learn and ability to communicate effectively both orally and in writing. Verbal communication includes speaking with the Resident Engineer, other contract staff, and facility staff both in person and via two-way communications. Ability to read and interpret plans and specs and prepare written contract administration documentation such as daily narratives (work reports), special inspection reports, daily time and material records, and document unit price work. Identify potential extra work issues and keep the Resident Engineer advised of possible problems. Review plans for constructability and prepare comments. Ability to conduct preconstruction and construction progress meetings, coordinate multiple work locations, perform audit inspection throughout the construction process, and coordinate quality assurance inspection of completed work. Ability to actively coordinate between private business entities and the various departments within the facility. Verify safety procedures are maintainedworking knowledge of NYCBC. Coordinate contractors' work with the Facility as needed. MINIMUM REQUIREMENTS A bachelors Degree in Civil or Structural Engineering is preferred. Minimum 5 years of experience inspecting construction work varying in size (projects ranging from $500K to $5 million plus) and complexity (multiple crews and crew sizes per shift). Valid Driver's License required. Night and weekend shifts are required Ability to obtain a high SWAC clearance or SIDA at Airports or TWIC at Ports. Trained in OSHA 30-hour construction safety. ICC/NICET Level 3 Asphalt or Highway Construction; ACI Concrete Special Inspector; and Work Zone Safety Certifications are desirable.

This project is a very high visibility rail tunnel project in NYC. 's schedule is working Swing Shift and Weekends***** JOB RESPONSIBILITIES include, but are not limited to, the following: Perform inspections on existing conditions, work being performed, and completed work for quality, completeness, and accuracy. Prepare written documentation, including daily work reports, controlled inspection reports, daily time and material records, and document unit price work. Review and mark plans and specifications as needed to ensure and track compliance with the work performed. Observe work conditions for compliance to applicable safety regulations. Prioritize conflicting needs; handle matters expeditiously; and follow through on projects to successful completion. Communicate with various parties on the progress of the work in a timely manner. Other related duties and tasks as required. QUALIFICATIONS include, but are not limited to, the following: Bachelor's degree in Civil Engineering or in a related field preferred 1 or more years of experience in construction supervision/inspection Prior experience with rail, tunnel, structural, station preferred OSHA 30 required. Advanced certifications preferred (NICET, ACI, etc.) Ability to pass a TWIC and/or SWAC Background Check at High Level Valid driver's license may be required depending on site location Strong written and verbal communication skills Must be able to sit and/or stand for prolonged periods of time Must be authorized to work in the United States Must be fluent in English (both written and spoken) Don't meet every single requirement? Studies have shown that women and people of color are less likely to apply to jobs unless they meet every single qualification. At STV, we are fully committed to expanding our culture of diversity and inclusion, one that will reflect the clients we serve and the communities we work in, so if you're excited about this role but your past experience doesn't align perfectly with every qualification in the job description we encourage you to apply anyways. You may be just the right candidate for this or other roles. STV offers the following benefits • Health insurance, including an option with a Health Savings Account • Dental insurance • Vision insurance • Flexible Spending Accounts (Healthcare, Dependent Care and Transit and Parking where applicable) • Disability insurance • Life Insurance and Accidental Death & Dismemberment • 401(k) Plan • Retirement Counseling • Employee Assistance Program • Paid Time Off (16 days) • Paid Holidays (8 days) • Back-Up Dependent Care (up to 10 days per year) • Parental Leave (up to 80 hours) • Continuing Education Program • Professional Licensure and Society Memberships STV is committed to paying all of its employees in a fair, equitable, and transparent manner. The listed pay range is STV's good-faith salary estimate for this position. Please note that the final salary offered for this position may be outside of this published range based on many factors, including but not limited to geography, education, experience, and/or certifications.

Hourly : 22.72 What do you get when you bring together a team of bright individuals and place them into an environment where “work” means making a difference in the lives of people across the globe? You get Sciolex Corporation, a fast-growing defense contractor focused on providing the U.S. Government a level of service that surpasses the epitome of excellence. Our core services include systems engineering technical advice, technical support, and administrative assistance. From our humble beginning as a small Service Disabled, Veteran Owned Small Business in Chantilly, VA, Sciolex Corporation is now the home for over 1,000 employees across the U.S. Over the past 19 years, Sciolex Corporation has constructed an environment that celebrates diversity and encourages a positive work/life balance, all while supporting government missions that our employees are proud to be a part of. When you work for Sciolex Corporation, you are working for a stable company that values you and is committed to ensuring you receive the utmost employee care. Responsibilities The Quality Control Inspector (QCI) supports the overall mission of the U.S. Citizenship and Immigration Services (USCIS) by facilitating the operations of a local Field Office. As a QCI, your responsibilities would include: Verifies compliance with work standards, SOPs, ROH, and other requirements documents, Pays particular attention to the timeliness and accuracy of work performed, Screens documents to determine accuracy of data contained in them and determines which need corrective action, Keeps various logs and uses random sampling to evaluate process efficiency, accuracy, and timeliness, Responsible for recognizing problems that might invalidate samples, investigating complaints, reviewing violations found by USCIS personnel, and preparing reports of findings and actions needed or taken, Recommends changes that will improve contract performance, Other duties as assigned. Qualifications & Physical Requirements High school diploma or equivalent Must be able to obtain a Public Trust/Suitability Clearance under the Department of Homeland Security from the United States Citizenship and Immigration Services Ability to read and understand proficiently in English Ability to lift and carry up to 45 lbs. or more in a physical environment Ability to perform tasks while bending, stooping, climbing, and reaching At Sciolex Corporation, our top priorities and most valuable resources are our employees, which is why we offer a competitive total compensation package. We are a proud Equal Opportunity Employer (EOE) who celebrates diversity in and out of our organization. Come see where your opportunities for success can flourish. NOTICE: Sciolex Corporation NEVER asks job applicants to issue any payment, service fees, or banking information to Sciolex Corporation or its recruiters as part of our application process. Before providing any personal information to outside parties, verify that the job you are applying for appears on our Careers site.

Job Description Under the direction of the inspection supervisor or leadperson(s), this individual must be able to perform inspection procedures on a variety of bearing components and finished assemblies. This individual must be able to read complex drawings and perform inspection operations as required using measuring instruments such as micrometers, verniers, dial indicators, and direct reading instruments such as air gages, plug gages and torque and radial clearance gages and Rockwell hardness tester. This person must be able to select the appropriate inspection instrument, perform inspection operations according to a specified sampling plan and prepare necessary paperwork when parts fail to meet print specifications. This individual will be responsible for reporting any discrepancies to either the leadperson(s) or the supervisor. Other responsibilities include keeping the workplace clean, moving work being inspected within the area of the workplace and performing any other reasonable duties as assigned by inspection supervision.

Storti Quality is synonymous with excellence in inspection, consulting, and construction support services for utilities and contractors. With decades of industry experience, we've earned our reputation by consistently delivering solutions that set the benchmark for quality and reliability. Our unwavering commitment to the highest standards drives every project we undertake, ensuring that our clients achieve success with confidence. At Storti, we don't just meet expectations-we exceed them. Primary Function: Under minimal supervision, the Visual Inspector provides plastic pipeline joint inspection services to verify quality and compliance with industry and client standards on behalf of Storti Quality Services' clients. Payrate: This position will start at $20/hr during the training period. Once training is successfully completed, the pay rate will move to $22/hr. Company vehicle provided! Duties and Responsibilities: Inspect fusion and mechanical joints of polyethylene (PE) natural gas pipelines to ensure compliance with project specifications and industry standards. Apply and enforce client specifications regarding pipeline joint inspection Verify construction crew personnel performing pipe joining hold valid and current Operator Qualifications (OQ). Confirm calibration, condition, and compliance of contractor pipe joining equipment per client and manufacturer specifications. Conduct visual inspections of PE pipe alignment, insertion depth, and proper record Prepare and submit daily inspection reports detailing work performed, services provided, and any deficiencies or deviations noted. Maintain appropriate Operator Qualification credentials for assigned Participate in daily job safety briefings and adhere to all company and client safety policies and Complete as built drawings of pipeline Utilize GPS receiver equipment to accurately gather data of each pipeline joint Maintain proper documentation of inspection activities and immediately communicate inspection failures to appropriate company personnel. Produce a daily report of the work performed, inspection services completed, and deficiencies or deviations. Be accessible and promptly respond to Storti Quality Services or client personnel by email or phone as needed. Report any incidents, near misses, or unsafe conditions Perform other duties as Knowledge, Skills, and Abilities: Proficient with computer applications and functions including, but not limited to, Microsoft Office, ESRI, and other related software and reporting tools. Proficiency with basic computer software and reporting Ability to work independently with minimal Effective communication skills with project team members, contractors, and Ability to travel to various job sites and work extended hours as required by project Education and Experience: High school diploma or GED is required Previous field utility or construction experience is NGA Operator Qualifications Physical Demands: Duties are performed primarily in an outdoor setting with exposure to changing weather conditions. Must be able to perform moderate physical activity including somewhat strenuous daily activities of a primarily productive/technical nature. Ambulatory across uneven surfaces of a construction excavation work zone, frequent bending at knees and waist. Must be able to perform work in a very loud, active construction environment. Capable of working outdoors which may require exposure to various environmental conditions, including the potential presence of: stinging insects such as bees, wasps, and hornets. Employees must be able to recognize and avoid insect habitats, follow established safety protocols, and wear appropriate personal protective equipment (PPE) when necessary. domestic animals such as dogs and cats wildlife such as snakes, deer, and small mammals The person in this position frequently communicates with co-workers and clients. Must be able to exchange accurate information. Additional: Must have valid driver's license and clean driving record. Disclaimer: Nothing in this restricts management's right to assign or reassign duties and responsibilities to this job at any time This description reflects management's assignment of essential functions, it does not proscribe or restrict the tasks that may be assigned This job description is subject to change at any time.

Essential Duties/ Requirements: Inspecting or testing materials, products, installations, and work for conformance to specifications by using a variety of inspection tools. Inspect equipment, products, or materials to identify the cause of errors or other problems or defects. Notifying supervisors of production problems, and assist in identifying and correcting these problems. Hand Soldering. Performance of any other company related job tasks required by business needs. Qualifications Physical Requirements: Excellent level of hand/ eye coordination and dexterity, including the ability to pick, pinch, or grasp an object. Long periods of sitting. Ability to occasionally lift up to 50 pounds. Occasional pushing/ pulling of plastic utility cart to transport work items. Please Note: The physical requirements described above are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Work environment: Work is conducted in an indoor production environment; therefore the employee is not exposed to any outside environmental conditions. Additional Information Rate of Pay: In compliance with the New York City salary transparency requirements, the hourly rate for this position is $16.50 per hour; which may be increased upon successful completion of the 90th day introductory period to a rate of $17.00-$17.75 per hour. Status: Full-time/ Regular (40 hours per week)/ Monday- Friday (8:30am- 5:00pm) We are an Equal Opportunity-Affirmative Action Employer

TopView Sightseeing is seeking a sharp, reliable, and observant Quality Control Inspector to help maintain high service standards across our sightseeing operations, including bus, boat, and bike tours. This full-time, field-based role plays a key part in ensuring safe, high-quality experiences for thousands of daily customers across New York City. Responsibilities: Conduct undercover inspections of service quality across all TopView locations and brands Monitor employee conduct and adherence to safety protocols and company standards Perform passenger counts and compile data for internal industry analysis Inspect competitor operations and provide detailed reports Document and report inspection results, policy violations, and improvement suggestions Collaborate with operations leadership to enhance service quality Requirements: High school diploma or GED Experience in supervision, inspection, or monitoring preferred NYC tourism experience is a plus Strong attention to detail and ability to collect and report accurate data Must have a smartphone and familiarity with Google Apps Professional, trustworthy, and presentable Excellent communication skills and a proactive attitude Must be comfortable working 100% in the field, including weekends and holidays Benefits: Health insurance 401(k) Paid time off Join a fast-growing company and help shape the quality of NYC's top sightseeing experiences-apply today! Powered by JazzHR AEzMzKURVa

Commercial and personal line insurance carriers rely on EXL as a key business partner through our Castle High Value and EXL Risk Control service offerings. We offer a variety of field inspections and risk control services to support our clients' underwriting processes. EXL's consultants deliver industry-leading professionalism, quality and turn-around time, and our innovative solutions help our clients keep ahead of the competition. ************************************************** Job Description EXL Risk Control is looking for self-directed independent contractors who possess excellent communication skills, computer proficiency, and a commitment to meeting client quality and timeliness standards. You will work from your own home or office, and service onsite survey/inspection assignments in the Bronx, NY area, and other locations within approximately 10 miles of Bronx. Responsibilities You will be responsible for scheduling on-site surveys and providing risk control reports to insurance industry clients. These reports contain information necessary to underwrite a commercial insurance policy and may include recommendations to control and/or correct potential loss producing conditions associated with that policy. You will be expected to manage assignments you accept, successfully secure customer appointments within a local territory and complete work assignments on time. Our Risk Control Inspectors evaluate businesses behind the scenes to identify hazards and improve safety, mitigating risks for our insurance company clients. The type of businesses we survey are commercial operations, including retail, restaurants, hotels, apartments, construction jobsites, churches, schools, etc. Most surveys are focused on assessing the business for Property and General Liability coverage, but we also service other commercial insurance lines of business including Workers Compensation, Auto/Fleet, Products Liability, Inland Marine and Builders Risk. Qualifications Preferred experience in commercial insurance, real estate, inspection, construction, claim, loss control, underwriting, and/or fire and safety experience is a plus, but all interested candidates are encouraged to submit their qualifications. In lieu of experience, we can refer you to a 15-hour online certification option to qualify you. Fees are negotiable depending on experience and the unique aspects of selected jobs. Tools or Items You Must Provide: Digital camera or tablet Computer Printer High speed internet access Reliable vehicle Measuring device such as a laser, 100 ft. tape, or measuring wheel Auto and General Liability Insurance All interested candidates are encouraged to apply.