Manufacturing technician jobs in Florence-Graham, CA - 633 jobs

The Manufacturing Engineering Technician is a hands-on role responsible for supporting the development, improvement, and scaling of assembly and test processes for a Class III medical device. This position serves as a critical link between design and production by supporting process validations, maintaining and troubleshooting equipment, documenting manufacturing processes, and assisting with pilot and low-volume manufacturing operations. The role requires strong technical aptitude, attention to detail, and a quality-focused mindset. The Manufacturing Engineering Technician works closely with cross-functional teams including Mechanical, Electrical, Biomedical Engineering, Quality, and Operations to support the delivery and scale-up of a regulated medical device in a fast-paced environment. This position requires the ability to work independently with minimal supervision. Key Responsibilities This job description reflects the general nature and level of work performed and is not intended to be an exhaustive list of all responsibilities. Equipment Maintenance and Calibration Set up, operate, and maintain production and test equipment in accordance with manufacturing instructions and quality standards. Support equipment qualifications (IQ/OQ/PQ), process validations, and test method validations. Perform routine maintenance and calibration to ensure optimal equipment performance. Troubleshoot and resolve equipment issues to minimize downtime. Build products in compliance with environmental controls, hygiene requirements, procedures, and work instructions. Develop and support assembly and test fixtures per approved documentation. Inspect incoming supplier components against quality inspection requirements. Test, inspect, and measure finished products, components, and devices to verify compliance with functional specifications. Troubleshoot, adjust, repair, and perform root cause analysis on finished products and components. Process Support Assist in the development, optimization, and documentation of manufacturing processes. Support engineers in implementing process improvements to improve efficiency, quality, and cost. Assist Quality and Purchasing teams with inventory tracking and documentation. Support the creation, modification, review, and execution of work instructions, assembly drawings, manufacturing processes, protocols, reports, records, and engineering change documentation. Quality Assurance Conduct in-process and final inspections to ensure products meet quality and regulatory requirements. Document and report nonconformances and defects. Support failure analysis, root cause investigations, and corrective and preventive actions (NCRs, CAPAs). Maintain cleanroom and controlled manufacturing environments in compliance with housekeeping, ESD, and 5S standards. Documentation and Compliance Maintain accurate records related to equipment maintenance, calibration, and process changes. Ensure all activities comply with FDA regulations, ISO 13485, and Good Manufacturing Practices (GMP). Collaboration and Training Collaborate closely with manufacturing engineers, quality personnel, and production teams to support daily operations. Provide technical support and training to manufacturing operators on equipment and processes. Continuous Improvement Identify opportunities for process, equipment, and workflow improvements. Participate in Lean Manufacturing, Six Sigma, or continuous improvement initiatives as required. Qualifications, Knowledge, and Experience Education and Experience Associate degree or certification in Engineering Technology, Mechanical Engineering, Biomedical Engineering, or a related field; or equivalent hands-on experience. Minimum of 3 years of experience in manufacturing, assembly, or production, preferably in medical devices, pharmaceuticals, or other regulated industries. Skills and Competencies Strong ability to follow detailed procedures and accurately document work. Solid understanding of manufacturing processes and quality systems. Strong verbal and written communication skills. Ability to work independently and collaboratively in a regulated environment. Physical Requirements Ability to perform light material handling tasks, including lifting up to 35 pounds for short durations. Ability to sit for extended periods, including shifts of 8 hours or more. Frequent keyboard and computer use. Willingness and ability to wear cleanroom attire (gown, gloves, mask, etc.) for the duration of assigned shifts.

Job Title: Manufacturing Engineering Technician III Duration: 06 Months Contract (Potential Temp to Perm) Pay Rate: $38 - $40/hr. (depending on experience) Shift Time: 1st Shift: M-F 6am - 2:30pm; 7am - 3:30pm; 8am - 4:30pm (Flexible) Responsibilities: Provides expertise in developing new engineering solutions to improve the manufacture of new and existing Client products. Uses existing procedures to solve standard problems; analyzes information and practices to make judgments. Effectively exchanges straightforward technical information, asks questions, and checks for understanding. Participates in the team's manufacturing and development work for new and existing products. Creates and improves processes, equipment, and tooling that can directly impact the growth efforts of operations. Works within standardized procedures, requirements, and safety policies to achieve objectives and meet deadlines. Other responsibilities as assigned. Consistent exercise of independent judgment and discretion in matters of significance. Regular, consistent and punctual attendance is required. May need to work nights and weekends, variable schedule(s) and additional hours as necessary. Provide support to facilities, and equipment maintenance functions as needed. Qualifications: Education: A Secondary Certificate/High School Diploma or equivalent combination of relevant education and work experience that will allow successful performance of job expectations. Certifications: Vocational training, apprenticeships or the equivalent experience in related field. Years Experience: Min 5-7 years of relevant experience Excellent ability to apply a systematic, disciplined, and analytical approach to problem-solving. Advanced knowledge of industrial systems; electrical, plumbing, mechanical systems, and high pressure compressed gas. Advanced fabrication and assembly skills including: MIG/TIG welding, sheet metal, pneumatic systems, and test equipment. Able to read, follow, and create documents, schematics, and blueprints. Effective interpersonal, verbal, and written communication skills to drive tasks to completion. Proficient in Microsoft Office and CAD tools. Highly motivated. Ability to create and maintain project timelines, priorities, and goals. Maintains organized records of work performed. Demonstrated teamwork and team-building skills in producing results and meeting organizational objectives. Able to create and maintain enthusiasm for new and challenging goals. Serve as a role model by promoting new ideas and positive change 3 'Must Haves': Advanced fabrication and assembly skills including: MIG/TIG welding, sheet metal, pneumatic systems, and test equipment Advanced knowledge of industrial systems; electrical, plumbing, mechanical systems, and high-pressure compressed gas Highly motivated. Ability to create and maintain project timelines, priorities, and goals. Maintains organized records of work performed. 3 'Nice to Haves': Proficient in Microsoft Office and CAD tools Serve as a role model by promoting new ideas and positive change Ability to create and maintain project timelines, priorities, and goals

The Electromechanical Technician will troubleshoot and repair primarily microprocessor-based controls used in LED message signs and light towers. This role involves working closely with customers to identify the cause of failures and provide effective repair solutions. This position requires a solid foundation in technical skills and a commitment to delivering excellent customer service. Occasional travel of up to 25% may be required. Key Responsibilities: Review work requests, wiring diagrams, drawings, and specifications to plan repair activities. Test controls and components to identify issues and determine repair requirements. Diagnose and repair faulty electronic components, including resistors, capacitors, ICs, and other circuit elements. Use voltmeters, ammeters, and oscilloscopes to probe circuits and locate failures. Repair printed circuit boards (PCBs) by replacing through-hole and surface-mount components, or by restoring damaged traces. Perform wiring, stripping, soldering, and crimping as needed. Maintain accurate documentation of all repairs, updates, and modifications to drawings or schematics. Communicate directly with customers to help identify root causes and recommend corrective actions. Provide technical support and occasional field service assistance. Qualifications: 5+ years of experience in a technical role involving electronic circuit repair. Strong mechanical and electrical aptitude with the ability to troubleshoot and repair complex electronic equipment. Proficient in reading and interpreting technical manuals, schematics and wiring diagrams. Experienced with test equipment such as multimeters and oscilloscopes. Excellent problem-solving and analytical skills. Advanced knowledge of analog and digital circuits. Hands-on experience with PCB rework and component replacement (through-hole and surface mount). Ability to work independently and manage multiple tasks simultaneously. Excellent communication and interpersonal skills, with a customer-focused approach. Fluent in English (verbal and written). Proficient with computers, experience with Microsoft Word and Excel is a plus. Associate (AA) or Bachelor's (BA) degree in a related field is preferred. Quality control (QC) experience is a plus. About National Signal: National Signal is a manufacturer of portable solar construction equipment, traffic safety products, and LED signs - specializing in solar-powered LED light towers, message signs, arrow boards, plus new in 2025 our solar-powered generators and mobile surveillance trailers. Headquartered in La Mirada, California, we are a member of the HS Roads & Security division of Hill & Smith Holdings PLC, based in Birmingham, England and publicly traded on the London Stock Exchange. Our worldwide Group Purpose is to “Create sustainable infrastructure and safe transport through innovation.” What We Offer Competitive compensation Health, dental, vision, short & long-term disability, and life insurance options 401(k) with company match Paid time off and holidays Supportive and team-oriented work environment We are an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status.

Definition Under general and/or immediate supervision from higher level engineering staff, performs a variety of journey level technical drafting, office and field engineering work; and provides assistance and information to the public. May exercise functional and technical supervision over less experienced technical staff. Position Snapshot/A Day in the Life: The Engineering Technician II performs routine drafting and technical engineering work in support of municipal infrastructure projects. Responsibilities include assisting with engineering design and planning, providing customer service, and performing technical office and field duties related to updating, maintaining, and analyzing the Public Works and Engineering Department's Geographic Information System (GIS) and utility infrastructure data. This position coordinates and conducts research, field data collection, and condition assessments of infrastructure assets, using GIS, database, and information management tools to support capital planning and ensure compliance with regulatory requirements. Essential Functions Engineering Technician II -This is the full journey level in the Engineering Technician series. Employees within this class are distinguished from the Engineering Technician I By the performance of the full range of duties as assigned including the moderately complex duties of drafting, office and field engineering work. Employees at this level receive only occasional instruction or assistance as new or unusual situations arise, and are fully aware of the operating procedures and policies of the work unit. This class is flexibly staffed and is normally filled by advancement from the I level, or when filled from the outside, requires previous work experience. ESSENTIAL FUNCTIONS:Incumbent must have the ability to: Review and process tract maps, parcel maps, of line adjustments, grants of easement, and street right-of-ways for recordation. Verify fulfillment of conditions of approval for new subdivisions; perform on-site inspections to verify survey monuments related to parcel maps and lot line adjustments. Prepare and draft technical engineering plans for construction of streets, alleys, storm drains, water lines, and other public improvements. Provide public assistance at counter and over the telephone. Prepare quantity and cost estimates for engineering projects. Maintain a variety of maps and records including tract maps, parcel maps, lot line adjustments, easements, street and address changes. Review engineering plans to determine appropriate layout of construction projects. Perform on-site inspections to obtain information; determine angles and set grade stakes, hubs, turning points and benchmarks using appropriate surveying techniques; locate and measure boundary lines, right-of-ways, and land grades. Make and check mathematical calculations related to surveying, drafting and basic engineering. Maintain accurate survey records in the form of field notes and sketches. Participate in a variety of engineering design and planning work related to municipal engineering projects. Answer questions and provide information to the public concerning engineering activities. Assist in development and maintenance of the record keeping and filing systems. Prepare, assemble and distribute copies of maps, charts and blueprints. Answer questions and provide information to the public concerning engineering activities. Perform any other tasks or functions deemed necessary to the daily operations of the employer. THE ABOVE LIST OF ESSENTIAL FUNCTIONS IS NOT EXHAUSTIVE AND MAY BE SUPPLEMENTED AS NECESSARY BY THE EMPLOYER. WORKING CONDITIONS: Position requires prolonged sitting, standing, walking, reaching, twisting, turning, kneeling, bending, and stooping in the performance of daily activities. The position also requires grasping, repetitive hand movement and fine coordination in preparing reports using a computer keyboard. Additionally, the position requires near and far vision when preparing and reading written reports and other work related documents. Acute hearing is also required when providing phone and counter assistance. Experience and Training Guidelines EXPERIENCE AND TRAINING GUIDELINES: A combination of experience and training that would likely provide the required knowledge and abilities is qualifying. The employee must have knowledge of: Engineering Technician II: In addition the qualifications of Engineering Technician I, knowledge of: Terminology, methods, practices and techniques of drafting. Trigonometry as applied to the computation of angles, areas, distances and traverses. Elementary surveying techniques and practices. Engineering maps and records. Ability to: Perform moderately complex engineering and mathematic calculations with speed and accuracy. Understand and follow written instructions and sketches. Use and care for drafting, surveying, and mechanical instruments and tools. Work independently in the absence of supervision. Experience: Engineering Technician II - Two years of increasingly responsible experience performing drafting and technical engineering work. Education: Equivalent to completion of the twelfth grade supplemented by specialized training in drafting, surveying or a related field. The City of Fontana has a flexible benefits plan. This plan allows for employees to select benefits based upon their individual needs. Full-time and Classified Part-time employees are eligible for benefits. Please to view our excellent employee benefit options. 01 What is your highest level of education? High School graduate or equivalent Some college Trade school graduate or Apprenticeship Associate's degree in related field Bachelor's degree in related field Bachelor's degree or higher in non-related field Equivalent to Bachelor's degree in related field Master's degree or higher in related field None of the above 02 Please indicate how much experience you have in performing drafting and technical engineering work. No experience Less than one (1) year. One (1) year or more year(s) but less than two (2) years. Two (2) or more years but less than four (4) years. Four (4) or more years but less than six (6) years. Six (6) years or more but, less than eight (8) years. Required Question

Work Type: Full-time, On-site About the Role The Senior Engineering Technician supports the build, test, and refinement of Evotrex power-generating RV prototypes and vehicle systems. This is a hands-on role working closely with engineering, design, manufacturing, and go-to-market teams to turn concepts into reliable, production-ready hardware and keep prototypes in top condition for public-facing use such as future-owner touring, community events and tradeshows. Key Responsibilities Prototype Build & Integration • Build, modify, and integrate prototype systems across mechanical, electrical, and structural areas. • Support installation of power, chassis, interior, and body systems. • Prepare vehicles and subsystems for testing, demos, and field use. Testing, Validation & Troubleshooting • Set up and execute engineering tests, including instrumentation and data collection. • Document results and support analysis with engineers. • Diagnose and resolve hardware and system issues. • Support root-cause analysis and design iteration. Prototype Support for Marketing & Sales • Maintain and service prototype vehicles used for marketing, sales, and public events. • Prepare prototypes for shows, demos, test drives, photo shoots, and media events. • Support on-site technical needs during key events when required. Workshop & Cross-Functional Support • Fabricate simple parts, fixtures, and test setups using shop tools. • Maintain a safe, clean, and organized workshop environment. • Support collaboration between engineering, manufacturing, operations, and go-to-market teams. • Mentor junior technicians when needed. Qualifications Required • 8+ years of hands-on experience as an engineering technician, prototype builder, or similar role (RV and electric vehicle systems experience required). • Proficiency using hand tools and power tools in a mechanical and electrical integration environment. • Strong troubleshooting and systems diagnostic capabilities. • Experience preparing and executing engineering tests (setup, sensors, data acquisition). • Comfortable reading and interpreting engineering drawings/schematics. Preferred • Prior experience in automotive, RV, aerospace, or consumer hardware environments. • Familiarity with LabVIEW or data acquisition interfaces. • Experience with DFMEA process, test procedure development, and design iteration. • Machine shop experience (basic fabrication, jigs, fixtures). • Excellent communication and documentation skills. Core Competencies • Hands-on problem solving: Thrives in a workshop environment with an engineer's mindset. • Adaptable & resilient: Flexible in managing changing priorities in a fast-moving startup. • Collaborative: Works well with cross-functional teams, values shared ownership of outcomes. • Quality & safety: Strong commitment to safe practices and high workmanship standards. • Chinese & English bilingual is a plus Benefits at Evotrex Competitive, high-growth compensation: Market-competitive salary with performance-based upside, designed to grow as Evotrex grows. Health, 401(k) & PTO: Comprehensive medical, dental, and vision coverage, a 401(k) program to help you plan for the long road ahead, and a generous 15-day PTO so you can recharge and explore. Quarterly Company Camping Trips: Every quarter, the team heads outside together-camping, exploring, and testing our products the way they're meant to be used. Work in The Wild - Up to 2 Weeks a Year: Work remotely from national parks, forests, coastlines, or anywhere adventure calls (open to selective roles). Domestic and International Travel Opportunities: Travel across the U.S. and abroad for product testing, events, media, partnerships, and adventures tied directly to the Evotrex mission. About Evotrex Evotrex is a California-based company transforming outdoor travel with intelligent, power-generating RVs built for adventure without limits. Founded by enthusiasts and innovators, Evotrex sets a new standard in the RV industry by blending proven technology, an automotive supply chain, and efficient manufacturing to deliver off-grid freedom with contemporary comfort. Engineered and validated for quality, durability, and seamless indoor-outdoor living, each model is designed to withstand the elements while unlocking new possibilities outdoors. For more information, please visit *************** and join our community on LinkedIn, X, YouTube, Discord, Instagram, and Facebook.

The primary responsibility of the Production Technician II will be to test/assemble Small Unmanned Arial System products in our manufacturing facility following released engineering drawings and assembly instructions using our work order system. Position Responsibilities * Primary duty is the mechanical assembly of subassemblies using small hand and/or power tools. Some soldering may be required * Final assembly of ground control equipment and air vehicles * Testing and troubleshooting of subassemblies and final assemblies * Works with other Production Technicians and Engineering to correct and improve upon any documents related to the assembly process at the required high quality standard * Works with manufacturing engineers to improve assembly efficiency, improve product quality, reduce manufacturing costs and validate released assembly/ fabrication documentation * Responsible for ensuring that work order protocols are followed and that work order paperwork is completed as the work is performed * May also train other technicians to build a product or follow an established assembly process * May conduct in-process quality checks to ensure that items built are to established high quality standards * Follows established procedures on routine work and may require instruction on new assignments * Maintains a clean and safe work environment * Other duties as assigned Basic Qualifications (Required Skills & Experience) * High School diploma or GED equivalent is required or equivalent combination of education, training, and experience * Minimum of 1 - 2 years of experience in a manufacturing or production environment in either electronics or electro-mechanical assembly and test or equivalent combination of education, training, and experience * Experience with hand tools, including crimpers, drills, taps, torque wrenches, power tools and air tools is required * Ability to read blueprints and schematics is desired * Ability to solder as part of assembly function and duties * Must have good manual dexterity and basic computer operation skills * Must have strong oral and written communication skills to communicate effectively with employees in the Company * Strong analytical, problem-solving skills and attention to detail with ability to interpret a variety of instructions furnished in written, oral, diagram or schedule form Other Qualifications & Desired Competencies * Vocational training in Electronics or Solder Certification is preferred * Versed in Lean Manufacturing methodologies is desired * Familiarity with Safety and ESD practices is desired * Work with engineering on new product development efforts where documentation and assembly instructions are not yet finalized * Applies acquired job skills, company policies and procedures to complete assigned tasks under minimal supervision * Able to excel in a fast-paced, deadline-driven environment, where small teams share a broad variety of duties * Displays strong initiative and drive to accomplish goals and meet company objectives * Takes ownership and responsibility for current and past work products * Is committed to learning from mistakes and driven to improve and enhance performance of oneself, others, and the company * Focuses on teamwork, collaboration and puts the success of the team above one's own interests Physical Demands * Ability to work in a manufacturing environment * Ability to frequently use hand tools (e.g. clamps) using light, minimal force * Regularly required to sit for long periods and occasionally stand for short periods * Frequently lift and/or carry objects of small size between 2lbs and 5lbs * Frequently required to use hand to finger, handle, or feel objects, tools, or controls and balance * Occasionally required to walk * Occasionally required to reach with hands and arms; stoop, kneel, crouch, or crawl; and talk or hear * Specific vision abilities required by this job include close vision, peripheral vision, depth perception, and the ability to adjust focus Clearance Level Clearance Level The salary range for this role is: $17 - $24 AeroVironment considers several factors when extending an offer, including but not limited to, the location, the role and associated responsibilities, a candidate's work experience, education/training, and key skills. ITAR Requirement: This position requires access to information that is subject to compliance with the International Traffic Arms Regulations ("ITAR") and/or the Export Administration Regulations ("EAR"). In order to comply with the requirements of the ITAR and/or the EAR, applicants must qualify as a U.S. person under the ITAR and the EAR, or a person to be approved for an export license by the governing agency whose technology comes under its jurisdiction. Please understand that any job offer that requires approval of an export license will be conditional on AeroVironment's determination that it will be able to obtain an export license in a time frame consistent with AeroVironment's business requirements. A "U.S. person" according to the ITAR definition is a U.S. citizen, U.S. lawful permanent resident (green card holder), or protected individual such as a refugee or asylee. See 22 CFR § 120.15. Some positions will require current U.S. Citizenship due to contract requirements. Benefits: AV offers an excellent benefits package including medical, dental vision, 401K with company matching, a 9/80 work schedule and a paid holiday shutdown. For more information about our company benefit offerings please visit: ********************************** We also encourage you to review our company website at ******************** to learn more about us. Principals only need apply. NO agencies please. Who We Are Based in California, AeroVironment (AVAV) is a global leader in unmanned aircraft systems (UAS) and tactical missile systems. Founded in 1971 by celebrated physicist and engineer, Dr. Paul MacCready, we've been at the leading edge of technical innovation for more than 45 years. Be a part of the team that developed the world's most widely used military drones and created the first submarine-launched reconnaissance drone, and has seven innovative vehicles that are part of the Smithsonian Institution's permanent collection in Washington, DC. Join us today in developing the next generation of small UAS and tactical missile systems that will deliver more actionable intelligence to our customers so they can proceed with certainty - and succeed. What We Do Building on a history of technological innovation, AeroVironment designs, develops, produces, and supports an advanced portfolio of unmanned aircraft systems (UAS) and tactical missile systems. Agencies of the U.S. Department of Defense and allied military services use the company's hand-launched UAS to provide situational awareness to tactical operating units through real-time, airborne reconnaissance, surveillance, and target acquisition. We are proud to be an EEO/AA Equal Opportunity Employer, including disability/veterans. AeroVironment, Inc. is an Equal Employment Opportunity (EEO) employer and welcomes all qualified applicants. Qualified applicants will receive fair and impartial consideration without regard to race, sex, color, religion, national origin, age, disability, protected veteran status, genetic data, sexual orientation, gender identity or other legally protected status. ITAR U.S. Citizenship required

Details: Additive Manufacturing Technician (Aerospace/Defense/Space) Pay: $38-$43/hour Our client is a leader in advanced metal additive manufacturing (AM) supporting aerospace, defense (ultra-secure), and space programs. They build and certify production flight hardware and are part of a next-generation ecosystem pushing the boundaries of AM technology. If you want to work hands-on with industry-leading EOS and SLM systems, support flight-critical production, and grow in a high-tech manufacturing environment, this role is a strong fit. Operate and maintain advanced metal AM machines (EOS M290/M4K, SLM 280, NXG, SLM500). Perform machine setup, calibration, and daily maintenance to ensure reliable builds. Handle metal powders safely-including sieving, sampling, loading, and cleanup-while maintaining full material traceability. Remove supports, self-inspect parts, and verify dimensional accuracy using calipers, micrometers, dial indicators, and other precision tools. Monitor builds according to a flexible machine schedule. Document test procedures, track build data, and suggest process improvements. Collaborate with engineering and operations teams to solve problems and optimize repeatability. Maintain a clean, safe work environment with proper PPE (respirators, gloves, protective footwear, eye/ear protection). Contribute to continuous improvement initiatives and support operational excellence. Details: What You Need to Bring to the Table Preferred: 2+ years in additive manufacturing or a comparable advanced manufacturing environment. Required: Ability to work flexible hours aligned with machine build schedules. Required: U.S. Person (ITAR-compliant) and ability to obtain/maintain a security clearance. Experience using hand, power, and pneumatic tools. Familiarity with AM processes, raw materials, powder handling, and quality control standards. Strong understanding of AM equipment-especially EOS or SLM systems. Ability to read/interpret work instructions, follow detailed procedures, and maintain accurate documentation. High attention to detail with strong organizational and communication skills. Comfort with physical requirements: standing for extended periods, lifting up to 50 lbs, using digital interfaces, and occasionally climbing, kneeling, or crouching. Why This Role Matters You'll be directly supporting the production of flight-ready hardware for aerospace, defense, and space applications. This is a high-impact, hands-on role where you'll learn cutting-edge AM technologies and help shape the next generation of advanced manufacturing.

THE ROLE: * Travel Requirement: None * FLSA Status: Non-Exempt * Shift: 3rd shift 11:00PM to 7:30AM * Employment Category: Full Time - Regular * Pay Range: $21.00 to $25.00/hr. Generous Brands is dedicated to inspiring people to thrive through the power of vibrant nutrition through its leading brands, Bolthouse Farms, Health-Ade, and Evolution Fresh. Generous Brands partners with SAMBAZON to manufacture, distribute and sell SAMBAZON branded beverages. Bolthouse Farms is a pre-eminent provider of chilled juice, smoothies, shakes, and protein drinks. Health-Ade is the fastest growing kombucha brand, dedicated to creating bubbly beverages that boost gut health. Evolution Fresh is a premier cold-pressed juice brand with national availability. And, SAMBAZON beverages bottle the superfruit power of acaí in juice and natural energy cans. The company operates its North American business from facilities in Southern California, and the Greater Chicago Area. To learn more, please visit *********************** WHAT YOU'LL BE RESPONSIBLE FOR IN THIS ROLE This position contributes to Evolution Fresh success by supporting and operating product packaging equipment in a juicing plant. Models and acts in accordance with Evolution Fresh guiding principles * Operates and maintains downstream secondary equipment * Replenishes raw materials on automated packaging equipment * Responds to stoppages on secondary packaging equipment and conducts troubleshooting, jam clearing and Cleaning * Performs changeovers on secondary packaging equipment and assists machine operator with changeover on primary packaging equipment * Responsible for quality checks on secondary packages, including lot coding and aesthetics * Assists machine operator with quality checks on primary packages, including lot coding, aesthetics, and seal Integrity * Tracks output from the palletizing equipment and responds to jams * Operates the supersack loading station * Demonstrates and understands safety as a core value and follows the key essentials to safety as set forth by our safety resolution; reinforces and coaches others to do the same * Understands and follows established safety guidelines, consistently complies with all safety procedures (e.g. PPE, Lock Out Tag Out) * Supports food safety, legality and quality programs * Maintains product quality through adherence to good manufacturing practices, Food Safety Preventative Controls, product specifications and quality procedures. Monitors and documents quality measures using analytical tools * Performs other duties as needed in support of business objectives and Evolution Fresh Mission & Values * Maintains regular and consistent attendance and punctuality WHAT WE'RE LOOKING FOR MINIMUM QUALIFICATIONS: * High School diploma/GED or equivalent experience * Production or distribution environment (1 year) * Operation of manual and automated packaging equipment (1 year) ADDITIONAL REQUIRED QUALIFICATIONS: * Basic math skills * Ability to follow verbal direction * Proficiency in Microsoft Windows and internet environments * Mechanical aptitude to make minor machine adjustments and clear jams in equipment * Ability to perform quality tests using analytical tools * Ability to gather, record on operational and quality metrics, through manual or automated systems * Ability to understand written policies and guidelines, specifications, and safety standards * Ability to work with a diverse team environment * Ability to work in accordance with safety, quality and sanitation standards, policies, and procedures * Ability to work variable shifts to support business needs PREFERRED QUALIFICATIONS: * Experience performing quality tests using analytical tools * Troubleshooting skills * Familiarity with food safety regulatory requirements and global standards including Preventive Controls for Human Food (FDA Code of Federal Regulations) and the Global Food Safety Initiative (GFSI). Experience with the GFSI certification schemes (i.e. BRC and/or or SQF) PHYSICAL DEMANDS: * O = Occasional (up to 25% of time) * F = Frequent (26%-74% of time) * C = Constant (75% or more of time) WHAT WE OFFER plus more! Our rich benefits packages are designed to support the health and well-being of both our eligible team members and families. * Medical, Dental & Vision * Group Life and AD&D * Voluntary Life and AD&D * Group Short & Long-Term Disability * 401(k) * Paid Time Off * Flexible Spending Accounts * Employee Assistance Program * Gym Membership Discounts EQUAL EMPLOYMENT OPPORTUNITY We are an equal opportunity employer committed to fostering a culturally diverse organization. We strive for inclusiveness and a workplace where mutual respect is paramount. We encourage applications from a diverse pool of candidates, and all qualified applicants will receive consideration for employment without regard to race, color, ethnicity, religion, sex, age, national origin, disability, sexual orientation, gender identity and expression, or veteran status. We will provide reasonable accommodation for qualified individuals with disabilities, as needed, to assist them in performing essential job functions. REASONABLE ACCOMMODATIONS Reasonable accommodations will be made to enable individuals with disabilities to perform the essential functions. If you are interested in applying for employment with Generous Brands and need special assistance to apply for a posted position, or if you believe you do not meet any of the required qualifications of a posted position due to a protected disability and would like to explore the possibility of an accommodation, please contact our Talent Acquisition team at *******************************. RECRUITMENT AGENCIES: Generous Brands does not accept unsolicited agency resumes. Generous Brands is not responsible for any fees related to unsolicited resumes. #LI-CG1 3rd shift 11:00PM to 7:30AM

Electromechanical / Mechatronics Technician Department: Production Reports to: Production Manager Location: Full-Time Los Angeles, CA The Company LettrLabs is a rapidly growing startup bringing automated, handwritten direct mail to scale. Our mission is to modernize and automate a traditionally manual industry, enabling businesses of all sizes to deliver authentic, personalized mail efficiently and reliably. We operate in a fast-paced, production-driven environment where continuous improvement, ownership, and execution matter. You At LettrLabs, we look for self-driven individuals who take pride in their work, operate with integrity, and understand how to balance quality, speed, and accountability. You enjoy solving complex electromechanical problems, working hands-on with equipment, and collaborating closely with engineering and production teams to keep systems running at peak performance. Job Summary The Electromechanical / Mechatronics Technician is responsible for the planning, maintenance, diagnostics, troubleshooting, and repair of our custom robotics and all production equipment within the Production department. This role owns electromechanical diagnostics, preventative maintenance, reactive repairs, equipment upgrades, and the execution of engineering build instructions for new machines, retrofits, and process improvements. This position plays a critical role in ensuring equipment reliability, production uptime, and consistent quality output. The Electromechanical / Mechatronics Technician is also accountable for diagnosing root causes of mechanical, electrical, and process-related issues and working cross-functionally to implement long-term solutions. Essential Job FunctionsMaintenance, Diagnostics & Repair Maintain, troubleshoot, and repair all printing presses, slitters, and related production equipment, including custom machinery and robotics. Perform structured diagnostics to identify root causes of mechanical, electrical, and software failures. Respond to equipment downtime events with urgency, clear troubleshooting methodology, and effective resolution. Maintain accurate documentation of maintenance activities, repairs, failure modes, and corrective actions. Preventative Maintenance & Process Improvement Develop, execute, and continuously improve preventative maintenance schedules in coordination with the Production Team. Identify recurring issues and implement corrective actions to improve uptime, reliability, and Overall Equipment Effectiveness (OEE). Recommend equipment modifications, upgrades, and process improvements based on observed performance and failure patterns. Engineering Collaboration & Build Execution Execute machine builds, upgrades, and retrofits by following engineering drawings, build instructions, wiring diagrams, and assembly documentation. Collaborate closely with Engineers to provide feedback on build feasibility, serviceability, and long-term maintainability. Assist with commissioning, testing, and validation of new equipment and process changes before full production rollout. Quality Ownership Own quality issues related to equipment performance and maintenance activities. Ensure machines operate within defined quality standards and production tolerances. Partner with QA and Production teams to resolve quality defects tied to mechanical or process issues. Training & Technical Leadership Train operators and technicians on proper equipment operation, basic troubleshooting, and early issue detection. Provide technical leadership during complex repairs and equipment interventions. Support the development of standardized maintenance and troubleshooting procedures. Vendor & Parts Management Identify and manage external vendors for electrical, pneumatic, hydraulic, and machining support as needed. Source parts and materials with a focus on reliability, lead time, and cost effectiveness. Maintain an organized inventory of critical spare parts to minimize downtime. Communication, Safety & Collaboration Communicate clearly with Production, Engineering, QA, and Leadership regarding equipment status, risks, and improvement opportunities. Uphold health, safety, and fire safety standards within the production environment. Contribute positively to a culture of ownership, accountability, and continuous improvement. QualificationsEducation & Experience 5+ years of hands-on maintenance experience with printing equipment, automation, or related industrial machinery with heavy focus on diagnostics (e.g. printing, automotive, etc) College degree or equivalent professional experience in mechanical, electrical, or industrial maintenance. Skills & Abilities Comfortable in fast-paced, ambiguous environments. Strong diagnostic and troubleshooting skills across mechanical, electrical, pneumatic, and software. Ability to read and execute from engineering drawings, schematics, wiring diagrams, and build instructions. Experience working in a production environment where uptime and quality are critical. Strong organizational and documentation skills. Comfortable using task management and communication tools (e.g., Asana, Trello, Slack, Microsoft Teams). Clear communicator able to work cross-functionally with Engineers, Operators, QA, and Leadership. Opportunities for Growth You will gain hands-on experience with advanced automation, proprietary machinery, and evolving production systems. As LettrLabs grows, this role has a clear path toward technical leadership and management, including ownership of future technician teams and direct involvement in new machine design, builds, and deployments. This job description is not intended to be all-inclusive. Employees may perform other related duties as needed to support the ongoing needs of the business. Actual base salary offered will be determined by: experience, skills, and work location. This range is meant to cover total compensation and benefits. We welcome you to apply even if your expectations are outside our listed range. LettrLabs USA$65,000-$85,000 USD Actual base salary offered will be determined by: experience, skills, and work location. This range is for base salary, our total compensation includes equity and benefits. We welcome you to apply even if your expectations are outside our listed range. LettrLabs is committed to creating a diverse environment and is proud to be an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status. LettrLabs is committed to providing reasonable accommodations for qualified individuals with disabilities in our job application procedures and throughout employment. If you need assistance or any accommodation, please let us know. LettrLabs does not accept unsolicited resumes from recruiters or employment agencies without a fully executed recruitment agreement in place. In the absence of such agreement, LettrLabs reserves the right to pursue and hire any candidates without an obligation to pay fees. Agencies are requested not to contact LettrLabs hiring managers or employees regarding recruiting services.

We are hiring a Powder Formulation Technician. The Powder Formulation Technician will be responsible for formulation of powdered media. 3rd Shift: 9:00 pm- 5:30 am At FUJIFILM Biosciences, we turn curiosity into breakthroughs that advance the field of life sciences. By offering a comprehensive portfolio of products and services in cell culture media, discovery research reagents, recombinant growth factors and proteins, fine chemicals, and critical assay materials, we partner with the brightest minds in biotech and pharma to tackle the world's biggest health challenges. Imagine being part of a team that enables life-changing discoveries like new vaccines, therapies, and advancements in regenerative medicine. Our culture fosters curiosity, collaboration, and innovation, and we pride ourselves on delivering unparalleled quality and service to our partners. If you're ready to make an impact, your future belongs with us at FUJIFILM Biosciences. Our headquarters in Santa Ana, California, is surrounded by world-class schools, lush parks, and scenic beaches like Laguna and Huntington, making it an ideal place to live, work, and explore. With additional campuses across the US, Europe, China, and Japan, we offer opportunities to make a difference worldwide. Fujifilm is globally headquartered in Tokyo with over 70,000 employees across four key business segments of healthcare, electronics, business innovation, and imaging. We are guided and united by our Group Purpose of "giving our world more smiles." Visit: *************************************************** Job Description Responsibilities: * Formulates Powder media formulas per manufacturing protocols utilizing various weighing equipment such as scales and balance. * Uses Mettler-Toledo IND780 terminal system in conjunction with the SAP ERP system to ensure correct raw materials assigned in the batch record are weighed at the specified quantity. * Suggest changes in departmental procedures and processes (SOPs) as needed. * Performs and documents line clearance at the start of each formulation event. * Maintains all required logs and associated documentation. * Assures that all chemicals are stored and labeled properly. * Performs process scale checks on all required equipment including scales and balances. * Keeps work area, utensils, tanks, mills, and equipment clean and organized. * Ensures that supplies needed such as weigh boats, gloves, lab coats, etc. are well stocked in their designated areas. Orders supplies or informs Lead/Supervisor if supplies need to be ordered. * Follows all safety procedures and works in a safe manner including wearing all required personal protective equipment. * Understands and follows procedures to ensure that chemicals are handled properly. * Good understanding of metric system and its conversions. * Follows and actively participates in sustaining the 6S program in the area. * Other duties as requested by Lead or Supervisor. Required Skills/Education: * High School Diploma or equivalent. * Background in medical devices, diagnostics, food/vitamin processing, or pharmaceuticals. * 1-2 years of hands on experience * General education about chemicals and proper handling (college level science preferred). * Working knowledge of metric system. * Good understanding of current Good Manufacturing Practices (cGMPs). * Ability to speak, read, and write English. * Good oral and written communication skills. Salary and Benefits: * For California, the base salary range for this position is $19.65 - $25.51 per hour. Compensation for the successful candidate will depend on various factors (e.g., qualifications, education, prior experience, location, etc.). * Medical, Dental, Vision * Life Insurance * 401k * Paid Time Off * #LI-onsite EEO Information Fujifilm is committed to providing equal opportunities in hiring, promotion and advancement, compensation, benefits, and training regardless of nationality, age, gender, sexual orientation or gender identity, race, ethnicity, religion, political creed, ideology, national, or social origin, disability, veteran status, etc. ADA Information If you require reasonable accommodation in completing this application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, please direct your inquiries to our HR Department (*****************).

We are hiring a Powder Formulation Technician. The Powder Formulation Technician will be responsible for formulation of powdered media. 3rd shift - 9PM - 5:30AM At FUJIFILM Biosciences, we turn curiosity into breakthroughs that advance the field of life sciences. By offering a comprehensive portfolio of products and services in cell culture media, discovery research reagents, recombinant growth factors and proteins, fine chemicals, and critical assay materials, we partner with the brightest minds in biotech and pharma to tackle the world's biggest health challenges. Imagine being part of a team that enables life-changing discoveries like new vaccines, therapies, and advancements in regenerative medicine. Our culture fosters curiosity, collaboration, and innovation, and we pride ourselves on delivering unparalleled quality and service to our partners. If you're ready to make an impact, your future belongs with us at FUJIFILM Biosciences. Our headquarters in Santa Ana, California, is surrounded by world-class schools, lush parks, and scenic beaches like Laguna and Huntington, making it an ideal place to live, work, and explore. With additional campuses across the US, Europe, China, and Japan, we offer opportunities to make a difference worldwide. Fujifilm is globally headquartered in Tokyo with over 70,000 employees across four key business segments of healthcare, electronics, business innovation, and imaging. We are guided and united by our Group Purpose of “giving our world more smiles.” Visit: *************************************************** Job Description Responsibilities: Formulates Powder media formulas per manufacturing protocols utilizing various weighing equipment such as scales and balance. Uses Mettler-Toledo IND780 terminal system in conjunction with the SAP ERP system to ensure correct raw materials assigned in the batch record are weighed at the specified quantity. Suggest changes in departmental procedures and processes (SOPs) as needed. Performs and documents line clearance at the start of each formulation event. Maintains all required logs and associated documentation. Assures that all chemicals are stored and labeled properly. Performs process scale checks on all required equipment including scales and balances. Keeps work area, utensils, tanks, mills, and equipment clean and organized. Ensures that supplies needed such as weigh boats, gloves, lab coats, etc. are well stocked in their designated areas. Orders supplies or informs Lead/Supervisor if supplies need to be ordered. Follows all safety procedures and works in a safe manner including wearing all required personal protective equipment. Understands and follows procedures to ensure that chemicals are handled properly. Good understanding of metric system and its conversions. Follows and actively participates in sustaining the 6S program in the area. Other duties as requested by Lead or Supervisor. Required Skills/Education: High School Diploma or equivalent. Good work history. Background in medical devices, diagnostics, food/vitamin processing, or pharmaceuticals. 1-2 years of hands on experience General education about chemicals and proper handling (college level science preferred). Working knowledge of metric system. Good understanding of current Good Manufacturing Practices (cGMPs). Ability to speak, read, and write English. Good oral and written communication skills. Salary and Benefits: For California, the base salary range for this position is $19.65 - $25.51 per hour. Compensation for the successful candidate will depend on various factors (e.g., qualifications, education, prior experience, location, etc.). Medical, Dental, Vision Life Insurance 401k Paid Time Off *#LI-onsite EEO Information Fujifilm is committed to providing equal opportunities in hiring, promotion and advancement, compensation, benefits, and training regardless of nationality, age, gender, sexual orientation or gender identity, race, ethnicity, religion, political creed, ideology, national, or social origin, disability, veteran status, etc. ADA Information If you require reasonable accommodation in completing this application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, please direct your inquiries to our HR Department (*****************).

Job Title: Electromechanical TechnicianJob Description We are seeking an electromechanical technician skilled in using hand and power tools to assemble both robust metal structures and delicate electronics assemblies. The ideal candidate has experience with a wide range of tools and is motivated to enhance their skills to produce high-quality outputs. You should maintain a tidy and well-organized workspace, keep detailed records of your work, and recognize that doing a job well the first time is more efficient in the long run. Responsibilities * Assemble robust metal structures such as tube frames and sheet metal. * Assemble delicate electronics assemblies, including PCBs and small-gauge wiring. * Perform soldering for assembly and repair of wires, through-hole, and surface mount components. * Conduct mechanical assembly using hand and power tools, including drilling, tapping, deburring, filing, and sanding. * Perform cable assembly, including stripping, crimping, testing, and strain relieving. * Apply good ESD practices while assembling sensitive electronic components into a system. * Engage in purchasing, inventory planning, and management. * Troubleshoot hardware issues and test equipment functionality. Essential Skills * Proficiency in soldering for assembly and repair of wires, through-hole, and surface mount components. * Experience in mechanical assembly with hand and power tools, including drilling, tapping, deburring, filing, and sanding. * Ability to perform cable assembly, including stripping, crimping, testing, and strain relieving. * Knowledge of good ESD practices for assembling sensitive electronic components. Additional Skills & Qualifications * Experience with purchasing and inventory management. * Strong troubleshooting skills for hardware and test equipment. Work Environment Work involves using various hand and power tools in a structured environment. The role requires adherence to ESD practices and organizational skills to maintain a tidy workspace. Employees are encouraged to improve and utilize their skills for efficient and high-quality outputs. Job Type & Location This is a Permanent position based out of Los Angeles, CA. Pay and Benefits The pay range for this position is $65000.00 - $85000.00/yr. The company provides Medical dental vision The company has unlimited PTO Workplace Type This is a hybrid position in Los Angeles,CA. Application Deadline This position is anticipated to close on Jan 30, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options.

What we're building Our vision is to electrify all waterborne vessels, and we're starting with electric water sport boats. Gas boats dominate today's marine industry not because of great product offerings but because of a lack of better alternatives. Boaters have grown accustomed to vehicles that feel stuck in the 1980s: unreliable, expensive, loud, noxious, and a nightmare to own and operate. They're also awful for the water and air they reside in. By contrast, electric boats are superior in nearly every way: not only are they far more reliable and less costly to operate, but they're also quieter, quicker, and cleaner, with no fumes or pollutants. However, they've been held back by both the technology and the talent to make them truly competitive with gas alternatives. That's Arc's opportunity. Using modern, aerospace- and automotive-inspired techniques, we're building our hulls, batteries, cooling systems, firmware, and software together to deliver the next generation of watercraft. Who we're looking for We're looking for someone excited by our vision, eager for a challenge, and ready to learn on the job. We pride ourselves on transparency and operate in a lean, high-trust environment where everyone takes ownership of their domain. You will be a full-time member of our Production team, working from our manufacturing facility in Torrance, CA. This role will focus on assembling, testing, and troubleshooting electromechanical systems, while also contributing to process improvements and various production projects. As a startup, we move fast. You'll need to be adaptable, but the following responsibilities and qualifications will remain relatively constant. Core responsibilities Assembling and disassembling electric powertrain systems and instrumentation Advising on the design of assemblies, components, and testing Setting up and utilizing test equipment, including digital multimeters, HIPOT machines, and power supplies Performing component assembly inspections and complete documentation Contributing to improving workshop standards, protocols, and processes Basic qualifications Proficiency using mechanical and electric hand tools Experience in building and troubleshooting electromechanical systems, including electric motors, batteries, sensors, electronics, controls, and pneumatics Ability to read and interpret engineering drawings, work instructions, and product data sheets Ability to: Stand for extended periods (6-10 hours per day) Lift up to 50 lbs. Work extended hours as needed to meet production demands Bonus qualifications High school diploma or GED Prior experience in a fast-paced manufacturing setting Experience with welding, composites, or interiors At Arc, we encourage diversity and consider all qualified applicants equally for employment, regardless of background, identity, or status. You're always welcome to reach out even if you don't meet many of these qualifications. Passion and aptitude make up for a lot. Our values We value these five things above all else: Ownership over both your work and the company's success Empathy for colleagues and for customers Humility in problem solving and collaboration Pragmatism for navigating ambiguity quickly and sensibly Inclusion of different backgrounds, opinions, cultures, etc. We work in an intense but rewarding environment, so it's important that our values align. We'd be happy to elaborate during the interview process. What we offer Talented teammates that challenge you to be better Access and often input to a wide range of business activities An hourly wage between $31.50 - 42.00 A meaningful equity stake An opportunity to have an outsized impact on industry-defining vehicles The ability to drive positive environmental change through your work Nearly free health insurance (we cover 99%) and a 401k Generous parental leave Daily lunches at our office in LA, plenty of snacks, lots of swag, and more Boat rides! Hope to hear from you soon! The crew at Arc

Manufacturing Technician / Engineering $25 - $35/hr Considering candidate with the following experience: Test/Automation/Mechanical Technician experience. IPC 610 - A - and/or IPC - A 620 Standards Experience with electrical and/or optical products and equipment. Contract to Hire, Conversion to permanent after 3 months. Benefits upon conversion! 3 week vacation 1st year 10 holidays 6 - ½ days off before the holiday 1 floating holiday Job Summary The Manufacturing Engineering Technician is responsible for providing support to the Process, Equipment and Automation Engineering teams. This role will help develop and optimize processes, create manufacturing documentation, assemble prototypes and equipment as well as aid in troubleshooting efforts for the engineering teams. Duties & Responsibilities Build, document, test, and repair product, fixtures, and/or equipment by following technical documentation. Maintain instruments and manufacturing equipment ensuring proper monitoring, compliance with calibration, and proper control of asset location. Fabricate custom wire harnesses for automation equipment, including cable preparation and termination by following technical drawings. Wire/install custom automation equipment based on drawing/schematics. Fabricate pneumatic assemblies for automation equipment and prototyping based on drawing/schematics. Develop Manufacturing Assembly Procedures and Work Instructions. Execute process development experiments, accurately log data, and organize results. Coordinate logistics for engineering tools and equipment between different sites. Request quote with vendors and order fixtures or equipment for duplication purposes. Identify and purchase of the shelf components needed for equipment/fixtures. Perform installation and adjustment of fixtures and equipment by following proper procedures. Order, receive, organize and maintain tools and standard hardware for manufacturing. Perform failure analysis testing on production and returned sensors (electrical test, teardown, X-Ray). Initiate and close production and engineering builds, along with all related paperwork. Set-up, program and maintain surface mount technology equipment. Quote and order supplies and consumables for laboratories (cleaning, masking, PPE, etc…) Maintain and promote 5S standards. Train manufacturing associates. Provide input to engineering staff for process, fixture & equipment improvements. Assist in prototype builds, such as 3D prints, testing, etc. Perform other duties as required. Minimum Qualifications CRM systems/ Salesforce Electronic Test/Automation/Mechanical Technician experience. Experience with electrical and/or optical products and equipment. Experience with Industrial Controls panel wiring, cable routing, crimping, termination, labeling, component layout, sensors, robotics, PLC wiring. Ability to read and understand schematics and mechanical drawings. Working knowledge of lab equipment (oscilloscopes, Multimeters, etc.) Working knowledge of metrology equipment (comparator, calipers, dial indicators, micrometers, pin gages, etc.) and able to perform measurements. Capability following and providing feedback on engineering procedures. Strong organizational skills as well as attention to detail. Ability to work well in team environment. Carry out small projects independently or complete assigned tasks for major product development efforts. Knowledge in cGMP requirements and preferably ISO 9000 requirements. Good communication skills, both verbal and written, with the ability to effectively interface with Research and Development, Quality Assurance, and Production teams. Experience with fabrication equipment (Mill, Lathe, 3D printers, drill press, chop saw, etc.) Excellent computer skills - CAD, word processing, and spreadsheets. Must be able to lift and carry up to 50 pounds. Education High School Diploma or G.E.D, associate degree or Certification in Electronics/Automation/Mechanical assembly preferred. #MS-OCENG

Job Description: Manufacturing Engineering Technician The Senior Manufacturing Engineering Technician provides manufacturing expertise while setting up and conducting complex product evaluation, creating process documentation, operations support, and small scale process development. Ensures high quality process development of Meggitt products/components. Job Core Responsibilities Interpret drawings, procedures and process documents to support Operations with their procedures Support Manufacturing Engineering department in execution of development and product evaluation activities Provides significant expertise in the creation of product test plans, procedures and reports Designs and develops special test rigs and advises on methods of testing Performs process validation test programs to ensure products/systems meet design specs Acts as a resource for operations to explain drawing and process requirements Support equipment maintenance team with advanced diagnostics of our equipment Performs analysis and troubleshooting to determine root causes of failures of product and equipment Select and procure tooling and equipment using purchase requisitions and approval for expenditure process Consistent exercise of independent judgment and discretion in matters of significance Knowledge of welding and brazing development and qualification Regular, consistent and punctual attendance is required. May need to work nights and weekends, variable schedule(s) and additional hours as necessary Job Specifications Education: Combination of relevant education and work experience or degree in Engineering or equivalent that will allow successful performance of job expectations Years Experience: 7+ years of relevant experience Skills: Excellent test engineering knowledge to improve products by applying best practices and experience Ability to provide significant expertise on complex product/process issues and to act as a resource for colleagues Experience in a manufacturing environment with raw material processing, and assembly Effective interpersonal skills to drive tasks to completion Email, ERP, Word, Excel, PowerPoint experience Excellent communication skills, both written and verbal and ability to communicate difficult concepts and negotiate well with others Plusses: AutoCad and Solidworks #LI-BP1 #LI-Onsite Seniority Level: Mid level Salary: $80,000-$90,000 Job Function: Technician Industry: Manufacturing Employment Type: Contract Location: Simi Valley, CA

Honda Racing Corporation USA, a leader in motorsports racing, is seeking several highly organized and detailed oriented Engineers, Technicians and CNC programmer/machinist to joins its racing program in Santa Clarita, CA: Chassis Development Engineer: Test, modify, and evolve hardware systems on race cars and track-focused road cars. Validate durability and performance against technical targets. Report lessons learned and document failures; manage problem resolution. Analyze logged data to identify root causes and devise countermeasures. Collaborate with designers and manage 3rd parties for design changes. Execute testing of countermeasure parts and new vehicle hardware updates. Specify instrumentation, perform data analysis, and write development reports. Innovate new testing tools and methods for track and rig tests. Development Engineer: Create development plans for concepts and components. Oversee full product life cycle from concept to production. Execute required tests and validations to meet project goals. Quality Engineer: Quality Control: Develop inspection protocols, validate measurement equipment. New Product Introduction & Corrective Actions: Lead cross-functional troubleshooting. Non-Conformance Management: Review issues, manage tooling calibration. Advanced Product Quality Planning: Conduct first article inspections, process validation. Data Analysis & Continuous Improvement: Generate reports, plan Six Sigma activities. Engine Dyno Technician: Set up/install/remove engines in test cells, configure instrumentation. Execute dyno tests, maintain equipment, review data, and report issues. Automotive Mechanics/Technicians: Build/rebuild racing chassis and hybrid systems. Perform quality checks, assembly, teardown, and inspection. Train new associates and support race car performance objectives. CNC Programmer/Machinist: Program CNC machines using MasterCam for high-performance engine components. Design fixtures/tooling and manage CNC setup and operation.

The primary responsibility of the Production Technician II will be to test/assemble Small Unmanned Arial System products in our manufacturing facility following released engineering drawings and assembly instructions using our work order system. Position Responsibilities Primary duty is the mechanical assembly of subassemblies using small hand and/or power tools. Some soldering may be required Final assembly of ground control equipment and air vehicles Testing and troubleshooting of subassemblies and final assemblies Works with other Production Technicians and Engineering to correct and improve upon any documents related to the assembly process at the required high-quality standard Works with manufacturing engineers to improve assembly efficiency, improve product quality, reduce manufacturing costs and validate released assembly/ fabrication documentation Responsible for ensuring that work order protocols are followed and that work order paperwork is completed as the work is performed May also train other technicians to build a product or follow an established assembly process May conduct in-process quality checks to ensure that items built are to establish high-quality standards Follows established procedures on routine work and may require instruction on new assignments Maintains a clean and safe work environment Other duties as assigned Basic Qualifications (Required Skills & Experience) High School diploma or GED equivalent is required or equivalent combination of education, training, and experience Minimum of 1 - 2 years of experience in a manufacturing or production environment in either electronics or electro-mechanical assembly and test or equivalent combination of education, training, and experience Experience with hand tools, including crimpers, drills, taps, torque wrenches, power tools and air tools is required Other Qualifications & Desired Competencies Vocational training in Electronics or Solder Certification is preferred Versed in Lean Manufacturing methodologies is desired Familiarity with Safety and ESD practices is desired Ability to read blueprints and schematics is desired Ability to solder as part of assembly function and duties Must have good manual dexterity and basic computer operation skills Must have strong oral and written communication skills to communicate effectively with employees in the Company Strong analytical, problem-solving skills and attention to detail with ability to interpret a variety of instructions furnished in written, oral, diagram or schedule form Work with engineering on new product development efforts where documentation and assembly instructions are not yet finalized Applies acquired job skills, company policies and procedures to complete assigned tasks under minimal supervision Able to excel in a fast-paced, deadline-driven environment, where small teams share a broad variety of duties Displays strong initiative and drive to accomplish goals and meet company objectives Is committed to learning from mistakes and driven to improve and enhance performance of oneself, others, and the company Focuses on teamwork, collaboration and puts the success of the team above one's own interests Physical Demands Ability to work in a manufacturing environment Ability to frequently use hand tools (e.g. clamps) using light, minimal force Regularly required to sit for long periods and occasionally stand for short periods Frequently lift and/or carry objects of small size between 2lbs and 5lbs Frequently required to use hand to finger, handle, or feel objects, tools, or controls and balance Occasionally required to walk Occasionally required to reach with hands and arms; stoop, kneel, crouch, or crawl; and talk or hear Specific vision abilities required by this job include close vision, peripheral vision, depth perception, and the ability to adjust focus Clearance Level Clearance Level AeroVironment considers several factors, including but not limited to, the location, the role and associated responsibilities, a candidate's work experience, education/training, and key skills. ITAR Requirement: T his position requires access to information that is subject to compliance with the International Traffic Arms Regulations (“ITAR”) and/or the Export Administration Regulations (“EAR”). In order to comply with the requirements of the ITAR and/or the EAR, applicants must qualify as a U.S. person under the ITAR and the EAR, or a person to be approved for an export license by the governing agency whose technology comes under its jurisdiction. Please understand that any job offer that requires approval of an export license will be conditional on AeroVironment's determination that it will be able to obtain an export license in a time frame consistent with AeroVironment's business requirements. A “U.S. person” according to the ITAR definition is a U.S. citizen, U.S. lawful permanent resident (green card holder), or protected individual such as a refugee or asylee. See 22 CFR § 120.15. Some positions will require current U.S. Citizenship due to contract requirements. Benefits: AV offers an excellent benefits package including medical, dental vision, 401K with company matching, a 9/80 work schedule and a paid holiday shutdown. For more information about our company benefit offerings please visit: ********************************** We also encourage you to review our company website at ******************** to learn more about us. Principals only need apply. NO agencies please. Who We Are Based in California, AeroVironment (AVAV) is a global leader in unmanned aircraft systems (UAS) and tactical missile systems. Founded in 1971 by celebrated physicist and engineer, Dr. Paul MacCready, we've been at the leading edge of technical innovation for more than 45 years. Be a part of the team that developed the world's most widely used military drones and created the first submarine-launched reconnaissance drone, and has seven innovative vehicles that are part of the Smithsonian Institution's permanent collection in Washington, DC. Join us today in developing the next generation of small UAS and tactical missile systems that will deliver more actionable intelligence to our customers so they can proceed with certainty - and succeed. What We Do Building on a history of technological innovation, AeroVironment designs, develops, produces, and supports an advanced portfolio of unmanned aircraft systems (UAS) and tactical missile systems. Agencies of the U.S. Department of Defense and allied military services use the company's hand-launched UAS to provide situational awareness to tactical operating units through real-time, airborne reconnaissance, surveillance, and target acquisition. We are proud to be an EEO/AA Equal Opportunity Employer, including disability/veterans. AeroVironment, Inc. is an Equal Employment Opportunity (EEO) employer and welcomes all qualified applicants. Qualified applicants will receive fair and impartial consideration without regard to race, sex, color, religion, national origin, age, disability, protected veteran status, genetic data, sexual orientation, gender identity or other legally protected status. ITAR U.S. Citizen, U.S. Permanent Resident (Green Card holder), asylee/refugee status as defined by 8 U.S.C. 1324b(a)(3) or a person approved for an export license from the appropriate governing agency.

We are hiring a Powder Formulation Technician. The Powder Formulation Technician will be responsible for formulation of powdered media. 3rd shift - 9PM - 5:30AM At FUJIFILM Biosciences, we turn curiosity into breakthroughs that advance the field of life sciences. By offering a comprehensive portfolio of products and services in cell culture media, discovery research reagents, recombinant growth factors and proteins, fine chemicals, and critical assay materials, we partner with the brightest minds in biotech and pharma to tackle the world's biggest health challenges. Imagine being part of a team that enables life-changing discoveries like new vaccines, therapies, and advancements in regenerative medicine. Our culture fosters curiosity, collaboration, and innovation, and we pride ourselves on delivering unparalleled quality and service to our partners. If you're ready to make an impact, your future belongs with us at FUJIFILM Biosciences. Our headquarters in Santa Ana, California, is surrounded by world-class schools, lush parks, and scenic beaches like Laguna and Huntington, making it an ideal place to live, work, and explore. With additional campuses across the US, Europe, China, and Japan, we offer opportunities to make a difference worldwide. Fujifilm is globally headquartered in Tokyo with over 70,000 employees across four key business segments of healthcare, electronics, business innovation, and imaging. We are guided and united by our Group Purpose of "giving our world more smiles." Visit: *************************************************** Job Description Responsibilities: * Formulates Powder media formulas per manufacturing protocols utilizing various weighing equipment such as scales and balance. * Uses Mettler-Toledo IND780 terminal system in conjunction with the SAP ERP system to ensure correct raw materials assigned in the batch record are weighed at the specified quantity. * Suggest changes in departmental procedures and processes (SOPs) as needed. * Performs and documents line clearance at the start of each formulation event. * Maintains all required logs and associated documentation. * Assures that all chemicals are stored and labeled properly. * Performs process scale checks on all required equipment including scales and balances. * Keeps work area, utensils, tanks, mills, and equipment clean and organized. * Ensures that supplies needed such as weigh boats, gloves, lab coats, etc. are well stocked in their designated areas. Orders supplies or informs Lead/Supervisor if supplies need to be ordered. * Follows all safety procedures and works in a safe manner including wearing all required personal protective equipment. * Understands and follows procedures to ensure that chemicals are handled properly. * Good understanding of metric system and its conversions. * Follows and actively participates in sustaining the 6S program in the area. * Other duties as requested by Lead or Supervisor. Required Skills/Education: * High School Diploma or equivalent. * Good work history. * Background in medical devices, diagnostics, food/vitamin processing, or pharmaceuticals. * 1-2 years of hands on experience * General education about chemicals and proper handling (college level science preferred). * Working knowledge of metric system. * Good understanding of current Good Manufacturing Practices (cGMPs). * Ability to speak, read, and write English. * Good oral and written communication skills. Salary and Benefits: * For California, the base salary range for this position is $19.65 - $25.51 per hour. Compensation for the successful candidate will depend on various factors (e.g., qualifications, education, prior experience, location, etc.). * Medical, Dental, Vision * Life Insurance * 401k * Paid Time Off * #LI-onsite EEO Information Fujifilm is committed to providing equal opportunities in hiring, promotion and advancement, compensation, benefits, and training regardless of nationality, age, gender, sexual orientation or gender identity, race, ethnicity, religion, political creed, ideology, national, or social origin, disability, veteran status, etc. ADA Information If you require reasonable accommodation in completing this application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, please direct your inquiries to our HR Department (*****************).

We are seeking a skilled Technician with expertise in assembling parts from subcomponents for motors. The ideal candidate will follow drawings, work instructions, and in-process inspection requirements to ensure high-quality assembly of stator windings and related components. Responsibilities * Assemble parts from subcomponents for motors following drawings and work instructions. * Operate equipment to make subcomponents, such as winders, presses, and cleats. * Cut and wind wire, insulate, and perform impregnation, buffing, painting, and testing of parts. * Interpret part drawings and engage in improvement discussions with technical support groups. * Participate in team efforts to solve departmental problems. * Position and fasten units to assemblies and subassemblies. * Connect and install electrical wiring and harnesses. * Measure dimensions and clearances of parts to determine tolerances using precision measuring instruments. * Test for mechanical reliability and inspect, test, and adjust completed units to ensure specifications are met. Essential Skills * Understanding of electrical theory and strong mechanical aptitude. * Proficiency in using precision measuring devices such as micrometers and calipers. * Significant mechanical knowledge and experience. * Excellent organizational skills and attention to detail. * Ability to read and interpret blueprints, complex assembly drawings, schematics, and diagrams. * Effective communication skills and ability to follow written and verbal instructions. Additional Skills & Qualifications * Minimum of 2 years' experience in winding AC and DC Motors, generators, or coils. * At least 8 years of related mechanical assembly experience. * High School Diploma or equivalent with related training. * Knowledge of AS9100 procedures is a plus. * Experience with lathe, mill, and drill press is desired. * Basic math skills, with algebra being a plus. * Flexibility to work overtime and travel as needed. * Excellent close vision and fine motor skills/manual dexterity required. Work Environment The role is based on a manufacturing floor environment. Candidates should be prepared to sit for prolonged periods, handle physical activities such as walking, standing, climbing, and lifting heavy items up to 50 lbs. Protective equipment must be worn as necessary. The work environment requires good eye/hand coordination and the ability to work well in a team. Pay and Benefits The pay range for this position is $20.00 - $33.15/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: * Medical, dental & vision * Critical Illness, Accident, and Hospital * 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available * Life Insurance (Voluntary Life & AD&D for the employee and dependents) * Short and long-term disability * Health Spending Account (HSA) * Transportation benefits * Employee Assistance Program * Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Chatsworth,CA. Application Deadline This position is anticipated to close on May 12, 2025. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options.