Manufacturing technician jobs in Homestead, FL - 77 jobs

At Curaleaf, we're redefining the cannabis industry with a strong commitment to quality, expertise, and innovation. As a leading global cannabis provider, our brands-including Curaleaf, Select, and Grassroots-offer premium products and services in both medical and adult-use markets. Join us at Curaleaf to be part of a high-growth, purpose-driven company that champions corporate social responsibility through our Rooted in Good initiative, supporting community outreach and positive change. Here, you'll have the opportunity to make a meaningful impact, drive innovation, and help shape the future of cannabis. Production Technician Job Type: Full-Time; Non-Exempt Shift: Monday- Friday, 2:00 pm- 10:30 pm Hourly Rate: $15.00/hr. Location: Homestead, FL Who You Are: As a Production Technician, you will be responsible for the packaging and labeling of the finished goods at our cultivation and manufacturing centers. You will be responsible for the production of a variety of finished products including packaged, dried flower, pre-rolls, vape cartridges and vape pens, and infused products. Our production team is expected to maintain quality control measures to ensure high-quality products and will carry out day-to-day tasks including prepping, packaging, and labeling per standard operating procedures set by Curaleaf and our production management. What You Will Do: Stage product and packaging supplies across various production lines to meet daily production schedule Perform quality assurance protocols as designated by Curaleaf's procedures Increase operational efficiency and reduce waste through ownership, teamwork, communication and collaboration Perform in-process and post-process quality assurance, testing and conducting visual inspections to ensure all product meets or exceed Curaleaf's specifications and patient's expectations Ensure 100% compliance involving proper weighing, data recording, product tracking and security throughout the entire packaging process Operate in an efficient manner that also complies with all OSHA regulations, Curaleaf SOP's and all applicable required procedures Ensure each product is properly labeled in compliance with state regulations Work in a quick and efficient manner and strive to consistently increase productivity Maintain the organization and cleanliness of the extraction room while performing all duties What You Will Bring: High School Diploma or G.E.D minimum Effective communication skills working in a team-based environment Strong attention to detail skills working in a high-volume production environment Strong work ethic and the ability to be punctual, reliable, and contribute to a positive, professional work environment Ability to be trained on various production equipment, SOPs, and consistently meet performance expectations set by leadership Ability to perform repetitive tasks for long periods of time Even Better If: You have one year of manufacturing and packaging experience with a focus on ensuring product safety, consumer safety and satisfaction, and high product quality is strongly preferred Physical Requirements: Allergen warnings, potential exposure to dust, pollen, and plant pathogens. Exposure to cleaning solvents, such as high volumes of isopropyl alcohol. Daily use of provided PPE, such as masks, hair nets, beard covers, respirators, boot covers, scrubs, non-slip shoes, and Tyvek suits as necessary. Ability to work in confined spaces Exposure to loud noises, including but not limited to air compressors, packaging equipment, and alarms. Exposure to CO2 manufacturing procedures at OSHA approved CO2 levels. High-stress tolerance, adaptable, flexible ability to work in an ever-changing environment Curaleaf Pay Transparency $15 - $15 USD What We Offer: Career Growth Opportunities Competitive Pay and Benefits Generous PTO and Parental Leave 401(K) Retirement Plan Life/ Disability Insurance Community Involvement Referral Bonuses and Product Discounts Benefits vary by state, role type, and eligibility. Follow us on Social Media: Instagram: @curaleaf.usa Twitter: @Curaleaf_Inc LinkedIn: Curaleaf LinkedIn Curaleaf Holdings, Inc. (TSX: CURA) (OTCQX: CURLF) ("Curaleaf") is a leading international provider of consumer products in cannabis with a mission to enhance lives by cultivating, sharing, and celebrating the power of the plant. As a high-growth cannabis company known for quality, expertise and reliability, the Company, and its brands, including Curaleaf, Select, Grassroots, JAMS, Find and Zero Proof provide industry-leading service, product selection and accessibility across the medical and adult-use markets. Curaleaf International is the largest vertically integrated cannabis company in Europe with a unique supply and distribution network throughout the European market, bringing together pioneering science and research with cutting-edge cultivation, extraction, and production. Home | Curaleaf | Cannabis with Confidence Our Vision: To be the world's leading cannabis company by consistently delivering superior products and services and driving the global acceptance of cannabis. Our Values: Lead and Inspire. Commit to Win. ONE Curaleaf. Driven to Deliver Excellence. Curaleaf is an equal opportunity employer. Curaleaf recruits, employs, trains, compensates, and promotes regardless of race, religion, color, national origin, gender identity, sexual orientation, physical ability, age, veteran status, and other protected status as required by applicable law. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodation. Individuals adversely impacted by the war on drugs are encouraged to apply. Current Curaleaf employees should apply for open positions through our Internal Job Board, which can be accessed via the link on The Leaf.

Join Barfield and Become a Part of the Adventure! If you are a talented Mechanical Technician interested in working in the exciting field of aviation, Barfield wants you! Barfield is more than just a prestigious name in the industry: it is subsidiary of Air France Industries KLM Engineering We are looking to hire a dedicated Mechanical Technician to join our team. The Mechanical Technician will support our Mechanical Department Duties and Responsibilities: Test, troubleshoot, repair, and calibrate units using schematics diagrams, Component Maintenance Manuals (CMM), and other documents such as Airworthiness Directives, Service Bulletins, and customer Engineering Orders. Inspect and test Mechanical Aircraft Components to identify defects and wear and tear areas. Disassemble, clean, and inspect Aircraft Component. Repair or replace damaged or worn components. Reassemble and test Mechanical units to ensure proper operation. Performs a variety of complicated tasks. Needs to be familiar with various Component Maintenance Manuals (CMM) practices and procedures. Reports to the lead person, supervisor, or manager. Requirements and Skills High School diploma or equivalent. Basic computer skills. Successfully completed technical training by a certifying educational institution or 1-2 years of bench experience in the field or related area. Reads, understands and, interprets directions of appropriate maintenance manuals to identify. Must be able to evaluate, troubleshoot, repair, and calibrate units using official documents. Must have knowledge and experience with mechanical tools, multimeters, micrometers, calipers, measuring indicators, and gauges. Must be able to work with little or no supervision. Ability to work with standardized tools and electric equipment. Ability to follow safety procedures and guidelines. Successful Factors Technical college, or Military training in their expertise. Knowledgeable, friendly, positive attitude, be a “Team Player”, always willing to learn new tasks, new skills and participate with peers. Share ideas to improve processes. You embody our values: CUSTOMER FOCUS We strive to provide the best services to our customers. INTEGRITY We are personally accountable for the highest standards of ethical behavior. TEAMWORK We are committed to a teamwork environment. ADAPTABILITY In an ever-changing world, we are adaptable to the required challenges. We offer a comprehensive total compensation and benefits package. For more information about us, please visit our website at ******************* Barfield is an equal opportunity employer. Equal Employment Opportunity is the Law. This law requires Barfield to post a notice describing the Federal laws prohibiting job discrimination. For information regarding your legal rights and protections, please click on the following link: Know Your Rights As a Federal Contractor, Barfield is required to participate in the E-Verify Program to confirm eligibility to work in the United States. For information please click on the following link: E-Verify. All qualified applicants will receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, or other legally protected status.

EY focuses on high-ethical standards and integrity among its employees and expects all candidates to demonstrate these qualities. At EY, you'll have the chance to build a career as unique as you are, with the global scale, support, inclusive culture and technology to become the best version of you. And we're counting on your unique voice and perspective to help EY become even better, too. Join us and build an exceptional experience for yourself, and a better working world for all. Technology Consulting - Supply Chain - Manufacturing Tech - Manufacturing Execution Systems - MES - Manager - Multiple Positions (1667298), Ernst & Young U.S. LLP, Miami, FL. Advise on the evaluation, design, customization and optimization of Digital and Cloud based solutions. Work through agreed upon phases of project governance, requirements definition, vendor selection, risk analysis, customization/configuration, testing, training, and rollout of a client's software implementation project lifecycle. Lead team members in developing applicable methodologies, tools, approaches, points of view, thought leadership and accelerators to differentiate EY in the digital manufacturing consulting market. Provide broad technical and functional knowledge of various key technology and business platforms. Team with client technology professionals, and third-party strategic alliances. Develop long-term relationships and networks both internally and externally. Interact and communicate effectively with teammates, clients, stakeholders, and executives. Manage and motivate teams of professionals with diverse skills and backgrounds. Consistently deliver quality client services by monitoring progress. Demonstrate in-depth technical capabilities and professional knowledge. Maintain long-term client relationships and networks. Cultivate business development opportunities. Full time employment, Monday - Friday, 40 hours per week, 8:30 am - 5:30 pm. MINIMUM REQUIREMENTS: Must have a Bachelor's degree in Computer Science, Information Technology, Engineering, Management Information Systems (MIS), Mathematics, or a related field and 5 years of advisory and/or consulting work experience. Alternatively, will accept a Master's degree in Computer Science, Information Technology, Engineering, Management Information Systems (MIS), Mathematics or a related field and 4 years of advisory and/or consulting work experience. Must have 4 years of experience in Manufacturing Execution Systems (MES) and/or manufacturing industry with at least one of the following: Performing Manufacturing Execution Systems (MES) business requirements analysis and specifications, system design, application software configuration, development, testing, installation, integration, start-up, or maintenance; OR Architecture development and support for complex and generic Manufacturing Execution Systems (MES) platforms in at least one of the following: GE Digital, Rockwell, Wonderware, Critical Manufacturing, or Siemens. Must have 4 years of experience providing design and configuration of computer system solutions in Supervisory Control and Data Acquisition (SCADA), Manufacturing Execution Systems (MES), and integration to Enterprise Resource Planning (ERP) and Quality Systems. Must have 2 years of experience within software/systems technology and direct solution development capabilities with an Manufacturing Execution Systems (MES) platform, database design, and MS SQL. Must have 4 years of experience developing, implementing and conducting user and administration training as part of the installation process. Must have 2 years of experience providing detailed and complex root-cause analysis support and maintenance to systems hardware and software. Must have 4 years of experience preparing written reports and technical evaluations such as functional specifications, technical documents, and proposals. Must have 4 years of experience demonstrating, communicating, and understanding of both manufacturing business process execution and computer systems architecture. Must have 2 years of experience managing teams of advisory and/or consulting employees. Requires travel up to 80%, of which 20% may be international, to serve client needs. Employer will accept any suitable combination of education, training or experience. Please apply on-line at ey.com/en_us/careers and click on "Careers - Job Search”, then “Search Jobs" (Job Number - 1667298). What we offer We offer a comprehensive compensation and benefits package where you'll be rewarded based on your performance and recognized for the value you bring to the business. The base salary for this job is $183,200.00 per year. In addition, our Total Rewards package includes medical and dental coverage, pension and 401(k) plans, and a wide range of paid time off options. Join us in our team-led and leader-enabled hybrid model. Our expectation is for most people in external, client serving roles to work together in person 40-60% of the time over the course of an engagement, project or year. Under our flexible vacation policy, you'll decide how much vacation time you need based on your own personal circumstances. You'll also be granted time off for designated EY Paid Holidays, Winter/Summer breaks, Personal/Family Care, and other leaves of absence when needed to support your physical, financial, and emotional well-being. • Continuous learning: You'll develop the mindset and skills to navigate whatever comes next. • Success as defined by you: We'll provide the tools and flexibility, so you can make a meaningful impact, your way. • Transformative leadership: We'll give you the insights, coaching and confidence to be the leader the world needs. • Diverse and inclusive culture: You'll be embraced for who you are and empowered to use your voice to help others find theirs. EY accepts applications for this position on an on-going basis. If you can demonstrate that you meet the criteria above, please contact us as soon as possible. The exceptional EY experience. It's yours to build. EY | Building a better working world EY exists to build a better working world, helping to create long-term value for clients, people and society and build trust in the capital markets. Enabled by data and technology, diverse EY teams in over 150 countries provide trust through assurance and help clients grow, transform and operate. Working across assurance, consulting, law, strategy, tax and transactions, EY teams ask better questions to find new answers for the complex issues facing our world today. For those living in California, please click here for additional information. EY provides equal employment opportunities to applicants and employees without regard to race, color, religion, age, sex, sexual orientation, gender identity/expression, pregnancy, genetic information, national origin, protected veteran status, disability status, or any other legally protected basis, including arrest and conviction records, in accordance with applicable law. EY is committed to providing reasonable accommodation to qualified individuals with disabilities, including veterans with disabilities. If you have a disability and either need assistance applying online or need to request an accommodation during any part of the application process, please call 1-800-EY-HELP3, type Option 2 (HR-related inquiries) and then type Option 1 (HR Shared Services Center), which will route you to EY's Talent Shared Services Team or email SSC Customer Support at **************************. This particular position at Ernst & Young in the United States requires the qualified candidate to be a "United States worker" as defined by the U.S. Department of Labor regulations at 20 CFR 656.3. You can review this definition at ****************************************************************************************** at the bottom of page 750. Please feel free to apply to other positions that do not require you to be a "U.S. worker".

Insight Global is looking for a Continuous Improvement Specialist to drive operational excellence and efficiency. You will lead long-term initiatives, collaborate with teams across various locations, identify improvement areas, and implement solutions to boost production and reduce costs. Collaborate with leadership to set priorities and present recommendations to senior leadership, including project details and potential challenges. Create and manage timelines and objectives for multiple projects to ensure quality and timely delivery. Implement Overall Asset Effectiveness strategies. Analyze and report on production activities. Direct process improvement projects and Capital Expenditure (CapEx) initiatives. Track team progress using Key Performance Indicators (KPIs) and present findings to stakeholders. Train team members in project management and continuous improvement practices. We are a company committed to creating inclusive environments where people can bring their full, authentic selves to work every day. We are an equal opportunity employer that believes everyone matters. Qualified candidates will receive consideration for employment opportunities without regard to race, religion, sex, age, marital status, national origin, sexual orientation, citizenship status, disability, or any other status or characteristic protected by applicable laws, regulations, and ordinances. If you need assistance and/or a reasonable accommodation due to a disability during the application or recruiting process, please send a request to Human Resources Request Form (****************************************** Og4IQS1J6dRiMo) . The EEOC "Know Your Rights" Poster is available here (*********************************************************************************************** . To learn more about how we collect, keep, and process your private information, please review Insight Global's Workforce Privacy Policy: *************************************************** . Skills and Requirements 3-5 years in an operational improvement role. Experience in the electronics/RF industry. Six Sigma Green Belt or higher certification. Knowledge of statistical process control and problem-solving techniques. Proficiency in Microsoft Products. Six Sigma Black Belt

Responsible for performing processing/manufacturing activities of Human Transplant Tissues and devices in an FDA regulated GMP facility. Essential Duties & Responsibilities Prepare processing solutions and storage media. Thaw and process frozen placental tissues into finished products. Perform production control on 100% of units manufactured, packaged and labeled. Initiate processing area set up and change over as needed. Conduct line clearance, equipment cleaning and facility cleaning as needed. Perform final product label creation, verification and labeling. Store final product in designated quarantine areas. Complete documentation (e.g. batch records, cleaning logs, etc.) for review. Maintain aseptic and/or neat work environments. Prepare disinfectant for equipment and Facility cleaning as necessary. Complete requisitions for quality control samples and submit to the designated lab for bio-burden testing. Provide information as needed to assist with investigations. Document/report equipment and facility problems and any potential deviation during processing. Skills & Abilities Essential Duty Definition: Excellent communication skills; fluent (oral/written) English. Ability to multi-task, setting priorities effectively to produce quality work in a fast-paced professional environment Communicates effectively and appropriately. Uses good judgment as to what to communicate to whom as well as the best way to get that accomplished. Speaks in a clear and credible manner, selecting the right tone for the situation and audience. Listens to others and allows them to make their point. Proficient in Microsoft software applications: Excel, Word, PowerPoint and Outlook. Familiarity with American Association of Tissue Banks, Good Manufacturing Practices (GMP), and Hazard Analysis a plus. Position Expertise/Qualifications High School Diploma, required Associate's Degree in Biotechnology, Life Sciences, or Surgical Technology, preferred. 6 months experience in Biotech, laboratory or other science, required Manufacturing in a GMP environment, required Physical Requirements Sedentary work that generally requires sitting and/or standing

GENERAL PURPOSE This position is responsible for properly recognize the correct linen belonging to the account being processed. You must ensure there is no mixed, dirty, or damaged linen before feeding into the machine or hand-folding it. You must maintain a fast pace speed meeting company's expectations while practicing safety procedures. In addition, the Production Operators will help on making sure the machinery is working properly, by communicating with their leaders of any issues. DUTIES AND RESPONSIBILITIES Feeding machinery with sheets, Duvets, bathrobes pillowcases, towels, tablecloths napkins, mats Responsible for maintaining a clean and organized working station. Ensure the linen being process belongs to the account assigned. Identify any damaged, dirty, or mixed linen and properly place it in the correct containers. Maintain an average of 85% or above for production based on the IT system in place. (Spindle) Must be logged into the IT system in place. (Spindle) always while working on the machine. Will be required to perform other duties as requested, directed, or assigned. Qualifications QUALIFICATIONS High school diploma or equivalent preferred but not required. 3 months or more related experience in a commercial laundry or hotel industry. Ability to understand, comprehend, and follow simple instructions, short correspondence, and product labeling. Ability to add and subtract two-digit numbers. Able to work in a fast-paced environment. Ability to meet required performance goals and objectives. Ability to work in a team environment and alone. Good communications, both orally and written in English. Must have good attention to detail. APPLICABLE WORKING CONDITIONS WORKING CONDITIONS AMOUNT OF TIME TYPICALLY SPENT ON ACTIVITY Inside work: protected from weather conditions FREQUENTLY OCCASIONALLY RARELY NEVER Outside work: no effective protection from weather FREQUENTLY OCCASIONALLY RARELY NEVER Both inside and outside work: activities occur both inside and outside an office enclosure FREQUENTLY OCCASIONALLY RARELY NEVER Extreme cold: below 32 degrees for periods of more than 1 hour throughout the normal course of a day FREQUENTLY OCCASIONALLY RARELY NEVER Extreme heat: above 100 degrees for periods of more than 1 hour throughout the normal course of a day FREQUENTLY OCCASIONALLY RARELY NEVER Noise: employees must shout to be heard over ambient noise level (hearing protection required) FREQUENTLY OCCASIONALLY RARELY NEVER Vibration: exposure to oscillating movements of extremities or whole body FREQUENTLY OCCASIONALLY RARELY NEVER Potential hazards: moving parts, electricity, gas, scaffolding, chemicals, etc. FREQUENTLY OCCASIONALLY RARELY NEVER Terminal viewing: extended viewing of screens FREQUENTLY OCCASIONALLY RARELY NEVER Atmospheric conditions (in non-confined spaces): fumes, odors, mists, gases, poor ventilation, etc. FREQUENTLY OCCASIONALLY RARELY NEVER Oils: air and/or skin exposure to oils and other cutting fluids FREQUENTLY OCCASIONALLY RARELY NEVER Respirator: use of a respirator is required FREQUENTLY OCCASIONALLY RARELY NEVER Physical stamina: due to emergency or workload demands, subject to extended work hours requiring stamina beyond normal demands or levels FREQUENTLY OCCASIONALLY RARELY NEVER None: employee is NOT substantially exposed to adverse environmental conditions (work occurs in typical indoors, office or administrative environment) FREQUENTLY OCCASIONALLY RARELY NEVER ESSENTIAL ABILITIES AND FUNCTIONS ACTIVITY FUNCTION AMOUNT OF TIME TYPICALLY SPENT ON ACTIVITY Essential Non-Essential Rarely Occasionally Frequently Standing (on a hard surface) X X Stairs X Walking X X Sitting X X Twisting X X Stooping X X Crouching X X Crawling X X Talking X X Hearing X X Reaching X X Seeing X X Balancing X X Pushing up to 20 lbs. X X Pushing up to 50 lbs. X X Pulling up to 20 lbs. X X Pulling up to 50 lbs. X X Grasping X X Lifting or carrying up to 10 lbs. X X Lifting or carrying up to 20 lbs. X X Lifting or carrying up to 50 lbs. X X Feeling X X Moving (continuous motion) X X Using precise hand movements X X Reasoning or solving problems X X Reading X X Writing X X Performing mathematical calculations X X Adhering to deadlines under pressure X X Learning or retaining technical information X X Interacting with customers or visitors X X

Job Title: Production Operator-#3 Board Role & Responsibilities: * Adhere to all safety/housekeeping requirements within a manufacturing setting. * Responsible for operating production equipment, including troubleshooting and making the necessary adjustments to ensure product and quality specifications are met. * Recording of production data and other results in the manner required. * Apply basic maintenance skills to help service equipment. * Expected to take an active role in all plant safety and continuous improvement initiatives as required by supervision. * Adaptable to scheduling requirements including shiftwork, assignment of overtime, working weekends, etc. where applicable. Qualifications & Requirements: * Able to work in a manufacturing setting in a safe manner and follow all plant safety and housekeeping rules. * Ability to learn to operate and troubleshoot plant equipment. * Ability to interpret verbal and written work instructions. * Ability to apply basic computer skills required for data entry and reporting. * Proficiency at taking measurements as needed to verify product is within specifications. * Possess basic maintenance skills, including familiarity with common hand tools and how to properly use them (Hammer, wrench, screwdrivers, pliers, putty knife, etc.). * Effective teamwork and communication skills needed with all co-workers. * Maintain regular and predictable attendance. Additional Information: * Shift: Rotating shift, 12 hours, 6am - 6pm, 6pm - 6am. * Department: 3 Board * Pay Rate/Range: $26.60/hr. Rate of pay may be adjusted based on the qualifications and experience of the candidate. USG employees enjoy a number of benefit options for themselves and their families. These include two medical insurance options, as well as vision and dental coverage. The cost of these optional programs varies based on coverage level - employees generally pay 25% of the monthly premium cost, USG pays the rest. These coverage options are offered on the first day of employment with no waiting period. Additionally, USG employees enjoy both a 401(k) Investment Plan with company match and a pension plan. Beyond these main features, employees may also choose from a number of additional programs like life insurance, accident insurance, legal insurance, even pet insurance, just to name a few. USG also offers Quarterly (hourly) / Annual (salary) bonus potential for all employees based on performance metrics tied to safety, quality, and productivity. USG also provides employees with paid time off and paid holidays. Since 1902, Chicago-based USG has been a leader in producing innovative, award-winning products and systems to build everything from major commercial developments and residential housing to home improvements. USG's employees are committed to the highest levels of customer satisfaction and quality in everything we do. Our steadfast commitment to the company's core business values - innovation, quality, integrity, service, diversity, efficiency and safety - have helped us become the company we are today. EOE including disability/veteran

Job description We are a gaming company that operates through out the Miami/ FLL area in various locations (gas stations and convenience stores). We are looking for a technician who will be responsible for the repair and maintenance of our games. Technician duties are, installing, servicing and repairing game machines. Some electric knowledge is required to test, repair and maintain the game machines and related gaming equipment. We are willing to train the right candidate. Duties: Builds, rebuilds, converts, adjusts, calibrates, and modifies any game machine and related gaming equipment. Diagnose causes of malfunctions and failures and take immediate appropriate action. Maintains a clean, safe, hazard-free work environment within area of responsibility. Performs all service requirements for gaming machines included in the installation and relocation. Checks for restocking of necessary supplies. Brings all areas up to standard. Discusses problem areas with Manager. Technical and/or electrical skills preferred Must Speak Both English/Spanish

2025-2026/07 - Operations Technician As of December 18, 2025 Job Listing: Operations Technician WPLG, the powerhouse independent in Miami has full time opening for a Broadcast Operations Position. Responsibilities: Operation of television broadcast equipment with heavy emphasis on master control operations including Florical master control automation, MediaFiler program and commercial ingest, Asset Collector, ShowTimer, Extreme Reach and other edge servers, transmitter remote controls, Ross Xpressions and Evertz EMC switchers. Experience switching live programs and handling multi-channel environment a plus as the successful candidate needs to have the ability to track multiple program streams constantly looking ahead for problems, as well as the ability to deal with exceptions as they arise and to communicate problems to managers and other departments. Duties also include the operation of Vinten camera robotics and audio mixing during broadcasts. The preferred candidate should also have experience bringing in content from news crews. Candidate must be able to work all shifts including overnight, nights, weekends and early morning. Prefer applicants with at least one year or more experience in the above-mentioned areas along with strong on-air operations experience. Computer skills and the ability to work under pressure is a requirement. ***All of the essential functions of this position are not necessarily described in this posting. ***We are an Equal Opportunity Employer and will consider all qualified candidates regardless of race, color, religion, national origin, age gender, marital status, disability, matriculation or political affiliation. Any offer of employment is conditioned on successful completion of a pre-employment drug screen, investigative background check, employment/education verifications and reference checks. A valid driver's license is required. Please follow link below to apply for Operations Technician Position: *****************************************************************

Requisition No: 860473 Agency: Department of Corrections Working Title: Engineering Technician IV - Statewide Pay Plan: Career Service Position Number: 70066666 Salary: $62,456.94 - $67,316.86 annually Posting Closing Date: 04/01/2026 Total Compensation Estimator Tool FLORIDA DEPARTMENT OF CORRECTIONS We Never Walk Alone Engineering Technician IV - WWTP This open competitive advertisement is for a Career Service position located at various Correctional Institutions in the Maintenance Department statewide. The mission of Facilities Management and Building Construction at the Florida Department of Corrections is to provide a safe, secure, and efficient environment for staff, inmates, and visitors. This is achieved through the effective management, maintenance, and construction of correctional facilities, ensuring they meet all regulatory standards and support the department's overall mission of public safety and rehabilitation. This position is not a telework position and is required to report to the FDC office in the area it serves. JOB DUTIES: This working position is responsible for the Waste/Wastewater Treatment Plant at a Correctional Institution both in operations and maintenance. This position also instructs inmates in the special skills necessary to operate a Water and Wastewater Treatment Plant through an apprentice on-the-job training program designed to develop experience and skills necessary to assume and fulfill the position of Operator of a water or sewer utility. * Operates and maintains Water Treatment and Wastewater Treatment Plants in compliance with DEP permits and regulations. * Conducts preventive maintenance for both plants, orders, and stocks necessary chemicals. * Repairs breakdowns at the operator level and troubleshoots specialized equipment such as compressors, pumps, air blowers, and chlorinators. * Cleans bar screens, grit chambers, settling, and sludge beds, and performs various water quality tests. * Prepares operational reports, maintains logs, and supervises inmates, preparing progress reports for their rehabilitation. BENEFITS: * Paid vacation, sick leave, and holidays. * Comprehensive health insurance and life insurance with accidental death and dismemberment benefits. * Supplemental Dental, Vision, Life, Disability and Hospitalization insurance. * Tuition-Free college courses. * Retirement Plans with the Florida Retirement System: * Pension Plan (Traditional Retirement Pension Plan) * Investment Plan (401(K)-Type Retirement Plan) * Deferred Retirement Option Program (Drop) * Deferred Compensation * Recently Retired? Beginning July 1, 2024, there is no longer a reemployment limitation; beginning with the 7th calendar month from the member's distribution date, there are no restrictions on working for an FRS employer. You will not be required to repay any prior distributions, and you may continue receiving distributions from the Investment Plan or Pension Plan without interruption. REQUIREMENTS: * A Class C Water and/ or Wastewater Treatment Plant Operator License or higher * A Valid Class E Driver's License Support of knowledge, skills, and abilities should be demonstrated on the application, in the education, in the work experience, in the work sample, in the interview and/or during reference checks. ADDITIONAL INFORMATION: BACKGROUND SCREENING REQUIREMENT The Florida Department of Corrections requires all job applicants and volunteers to pass a Level 2 background check as per Chapter 435, Florida Statutes. This check must be completed before they can start working or volunteering. EMPLOYMENT ELIGIBILITY The Florida Department of Corrections (FDC) only hires U.S. citizens and those authorized to work in the U.S. FDC uses E-Verify to confirm an employee's eligibility to work after completing the I-9 form. For online application issues, call the People First Service Center at **************. Applications will be accepted until 11:59 PM EST on the closing date. The State of Florida is an Equal Opportunity Employer/Affirmative Action Employer, and does not tolerate discrimination or violence in the workplace. Candidates requiring a reasonable accommodation, as defined by the Americans with Disabilities Act, must notify the agency hiring authority and/or People First Service Center (***************. Notification to the hiring authority must be made in advance to allow sufficient time to provide the accommodation. The State of Florida supports a Drug-Free workplace. All employees are subject to reasonable suspicion drug testing in accordance with Section 112.0455, F.S., Drug-Free Workplace Act. VETERANS' PREFERENCE. Pursuant to Chapter 295, Florida Statutes, candidates eligible for Veterans' Preference will receive preference in employment for Career Service vacancies and are encouraged to apply. Certain service members may be eligible to receive waivers for postsecondary educational requirements. Candidates claiming Veterans' Preference must attach supporting documentation with each submission that includes character of service (for example, DD Form 214 Member Copy #4) along with any other documentation as required by Rule 55A-7, Florida Administrative Code. Veterans' Preference documentation requirements are available by clicking here. All documentation is due by the close of the vacancy announcement. Location:

LTD. (NASDAQ: FTAI) FTAI owns and maintains commercial jet engines with a focus on the Maintenance, Repair and Exchange (MRE) of CFM56 and V2500 engines. FTAI's propriety portfolio of products, including The Module Factory and a joint venture to distribute engine PMA helps make CFM56 and V2500 engine maintenance simpler, more cost-effective, significantly faster, and more environmentally friendly. Additionally, FTAI owns and leases jet aircraft which often facilitates the acquisition of engines at attractive prices. FTAI invests in aviation assets and aerospace products that generate strong and stable cash flows with the potential for earnings growth and asset appreciation. FTAI operates globally and has offices in New York, Miami, Montreal, Singapore, Dubai, United Kingdom and Ireland. JOB OVERVIEW The Test Cell Facility Operations Technician is responsible for maintaining, troubleshooting, and repairing all systems that support the operation of aircraft engine test cells. This includes mechanical, electrical, hydraulic, pneumatic, and control systems, as well as facility infrastructure. The role ensures maximum uptime, reliability, and safety of the test cell environment to support production and engineering testing schedules. May require occasional shift work, weekends, or overtime to support critical testing schedules. Responsibilities: * Preventive & Corrective Maintenance * Perform routine inspections, servicing, and preventive maintenance on test cell systems, including fuel supply, cooling water, air handling, exhaust systems, and control instrumentation. * Troubleshoot and repair mechanical, electrical, and hydraulic issues in a timely manner to minimize downtime. * Maintain, calibrate, and verify functionality of critical systems such as instrumentation, sensors, and safety interlocks. * Facility & Equipment * Perform routine inspections, servicing, and preventive maintenance on test cell systems, including fuel supply, cooling water, air handling, exhaust systems, and control instrumentation. * Troubleshoot and repair mechanical, electrical, and hydraulic issues in a timely manner to minimize downtime. * Maintain, calibrate, and verify functionality of critical systems such as instrumentation, sensors, and safety interlocks. * Safety & Compliance * Perform routine inspections, servicing, and preventive maintenance on test cell systems, including fuel supply, cooling water, air handling, exhaust systems, and control instrumentation. * Troubleshoot and repair mechanical, electrical, and hydraulic issues in a timely manner to minimize downtime. * Maintain, calibrate, and verify functionality of critical systems such as instrumentation, sensors, and safety interlocks. * Continuous Improvement & Reliability * Perform routine inspections, servicing, and preventive maintenance on test cell systems, including fuel supply, cooling water, air handling, exhaust systems, and control instrumentation. * Troubleshoot and repair mechanical, electrical, and hydraulic issues in a timely manner to minimize downtime. * Maintain, calibrate, and verify functionality of critical systems such as instrumentation, sensors, and safety interlocks. Qualifications: * Associate degree or technical certification in Mechanical, Electrical, or Industrial Technology, or equivalent hands-on experience. * 3+ years of experience in facility maintenance, test cell operations, or similar industrial environment. * Strong knowledge of mechanical, electrical, hydraulic, and pneumatic systems. * Ability to read and interpret technical drawings, schematics, and manuals. * Proficiency with test equipment, calibration tools, and diagnostic instruments. * Strong troubleshooting, problem-solving, and organizational skills. Preferred Qualifications: * Experience with aircraft engine test cells, aerospace facilities, or high-performance industrial test environments. * Knowledge of reliability-centered maintenance (RCM) principles and predictive maintenance techniques. * FAA A&P license or equivalent technical certification. Job Demands: Work is performed in a Shop environment and requires the ability to perform extensive standing, driving, walking, and climbing; to lift up to 50lbs. regularly; to manipulate up to 100lbs. with assistance. Must be able to bend, stoop, climb to reach materials, and work in a noisy environment. Equal Opportunity Employment Statement: Our company is an equal opportunity employer. We do not discriminate against any employee or applicant based on race, color, religion, national origin, age, sex (including pregnancy), physical or mental disability, genetic information, sexual orientation, gender identity, marital status, veteran status, or any other characteristic protected by applicable federal, state, or local laws.

Job Description Braman Miami is looking for Ceramic Coating Technicians. This is your opportunity to work with a company that has been trusted in the South Florida community for over 50 years. The Ceramic Coating Technician is a hands-on role that requires attention to detail and a passion for delivering high-quality results. Responsibilities: Surface Preparation: Thoroughly clean and decontaminate vehicle surfaces to ensure optimal adhesion of ceramic coatings. Application: Apply ceramic coatings using proper techniques and equipment to achieve even coverage and a smooth finish. Quality Control: Inspect coated surfaces for imperfections, ensuring high-quality results and customer satisfaction. Customer Service: Communicate effectively with customers to understand their needs and provide recommendations for ceramic coating services. Maintenance: Educate customers on proper maintenance procedures to prolong the lifespan of ceramic coatings and preserve the vehicle's appearance. Safety: Adhere to safety protocols and regulations to maintain a safe working environment. Requirements: - Previous experience in ceramic coating is required! - Strong customer service skills with the ability to communicate effectively with customers and team. - Attention to detail and the ability to deliver high-quality results. - Valid driver's license with a clean driving record. - Ability to work in a fast-paced environment and prioritize tasks effectively. - Knowledge of custodial practices and cleaning techniques is a plus. Benefits: Medical, dental and vision plan. 401(k) savings plan. Accident & critical illness insurance. Paid vacation. Employee Lease programs and much more. Shop Type: Dealership Work Remotely No Powered by JazzHR mTutZNz3s0

Job Title: Quality Regulatory Technician - Labeling Compliance Department: Quality Assurance / Regulatory Affairs Employment Type: Monday - Friday 8:30am - 5pm $19 - $22/ HR We are seeking a detail-oriented Quality Regulatory Technician to join our Quality Assurance team, specializing in labeling compliance. This role ensures that all product labels and packaging meet internal standards and adhere to local, state, federal, and international regulatory requirements. The ideal candidate is highly organized, collaborative, and experienced in dietary supplement labeling and packaging. MUST BE BILINGUAL ENGLISH/SPANISH. Key Responsibilities Apply style guidelines and branding standards to new and revised product labels. Ensure compliance of all labeling with applicable local, state, and federal regulations. Create and revise label items in the company's document control system; draft and release engineering change orders. Support continuous improvement initiatives within the Labeling department. Provide daily regulatory support for labeling strategies and operations across multiple projects. Interpret and apply regulatory guidance to labeling within the dietary supplement industry for domestic and international markets. Collaborate cross-functionally with teams including Engineering, Marketing, Quality, and R&D to support label and packaging updates and new product development. Interface with distributors and stakeholders to resolve labeling/packaging issues. Oversee the development and review of advertising and promotional materials for regulatory compliance. Conduct proofreading and side-by-side reviews of primary and secondary labels, including multilingual inserts, for final artwork approval. Manage and track labeling/packaging timelines and documentation for regulatory submissions and audits. Communicate regulatory updates and interpret compliance directives for internal teams, offering solutions and guidance. Provide support to Regulatory and Design teams and assist with additional regulatory duties as assigned. Qualifications 2+ years of experience in regulatory labeling or packaging, preferably in the dietary supplement or consumer goods industry. Strong knowledge of FDA regulations, FTC advertising guidelines, DSHEA, and international labeling standards. Experience with document control systems and engineering change orders. Excellent proofreading skills and attention to detail. Strong organizational, multitasking, and communication skills. Ability to collaborate in a fast-paced, cross-functional environment.

Join us at Accor, where life pulses with passion! As a pioneer in the art of responsible hospitality, the Accor Group gathers more than 45 brands, 5,600 hotels, 10,000 restaurants, and lifestyle destinations in 110 countries. While each brand has its own personality, where you will be able to truly find yourself, they all share a common ambition: to keep innovating and challenging the status-quo. By joining us, you will become a Heartist , because hospitality is, first and foremost, a work of heart. You will join a caring environment and a team where you can be all you are. You will be in a supportive place to grow, to fulfil yourself, to discover other professions and to pursue career opportunities, in your hotel or in other hospitality environments, in your country or anywhere in the world! You will enjoy exclusive benefits, specific to the sector and beyond, as well as strong recognition for your daily commitment. Everything you will do with us, regardless of your profession, will offer a deep sense of meaning, to create lasting, memorable and impactful experiences for your customers, for your colleagues and for the planet. Hospitality is a work of heart, Join us and become a Heartist . Job Description To ensure that the hotel guest rooms and building is properly maintained in proper working conditions. Performs general repair and maintenance such as painting, plumbing and electrical systems. Checks electrical systems such as A/C controls, television sets, lighting systems, and makes minor repairs and replacements. Performs guest room calls and repairs. Reports to: Director of Engineering Essential Functions: Make repairs to hotel air conditioning system (i.e. change or clean filters, clean coils, replace motors, water valves, actuators, heating strips, purge water lines etc.) Perform preventive maintenance on all equipment (i.e. boilers, chillers, HVC-Heating Ventilation and Air Conditioning, electrical, etc.). Take required readings on equipment. Test cooling tower and record readings. Replace and program televisions as needed. Replaced light switches, receptacles, light bulb and fixtures. Perform furniture repair. Replaced and repair pumps. Perform plumbing repairs (i.e. clogged drains, copper pipe, change washers, change handles, drain fittings, etc.). Trace and repair all types of water lines. Troubleshoot and repair kitchen equipment. Maintain repair and preventive maintenance records. Perform and maintain work to local, state and Federal codes. Paint designated areas. Repair and finish sheet rock. Repair all types of wall coverings. Repair and program hotel electronic lock system. Perform assignments and specific projects requested by management. Perform all routine building inspection checklists. Fill out Daily Call Log Report and Incident Reports as needed. Clean all work areas after completing job. Maintain all mechanical items in guest rooms and public areas. Receive direction for house calls via radio. Assist other engineers and mechanics with assignments, work as a team. Maintain all grounds and landscaping. Pressure washing as needed. Have a thorough understanding of Novotel Miami Brickell fire alarm procedures and other emergencies. Follow procedures for elevator entrapment. Follow procedures reporting in response to water leak. Follow procedures in response to fire alarm. Have a thorough understanding of Novotel Miami Brickell Hotel rules, regulations and SOPs. Perform assignments and specific projects requested by management. Tools and Equipment: Telephone, pen/pencil, photo-copying machine. All engineering related tools and equipment. All cleaning equipment. Working Environment: Interior of hotel, in all areas of the hotel. Exposure to extreme hot and cold temperatures. Exterior of hotel with exposure to weather conditions. Flexible and long hours sometimes require. Heavy work- Exerting in excess of 100 pounds of force occasionally, and/ or in excess of 50 pounds of force frequently and/ or in excess of 20 pounds constantly to lift, carry, push, pull, or otherwise move objects. Exposure to various hazardous chemicals. Additional Information All your information will be kept confidential according to EEO guidelines.

SUMMARY: The Technician I must demonstrate high mechanical aptitude and will inspect, service, maintain, troubleshoot, repair, and overhaul aircraft components while maintaining a safe work environment and following all company and federal rules/ regulations. DUTIES & RESPONSIBILITIES: Responsibilities include, but are not limited to: Troubleshoot, repair, inspect, modify and service equipment. Perform and document work performed per appropriate manuals and regulations as required. Maintain all shop-calibrated tools in satisfactory operational conditions. Ensure that all work is performed in accordance with approved technical and regulatory data. Perform work assignments as determined by the shop lead. Uses appropriate inspection techniques, and calibrated equipment for the unit/part being accomplished. Comply with environmental health and safety policies and procedures. Records information and accomplishes the work assignments in compliance with the inspection procedures manual in quality policies and procedures. Ability to read and interpret schematics and drawings. Perform all assigned tasks in a safe and timely manner. Other duties as assigned. Qualifications MINIMUM REQUIREMENTS: Technical Degree (Airframe and Powerplant Certification) or equivalent 4+ years of relevant/technical work experience OR An additional 3 years of specific work experience in lieu of degree. Must be able to multi-task/project oriented with the ability to work under pressure in a fast-paced industry meeting established timeline. Have acceptable verbal, writing, listening and interpersonal skills to interact with all functional levels of internal contacts. Be detailed oriented and organized. Must be computer literate, and proficient with Microsoft Office programs (Outlook, Word, and Excel). Willing to work additional hours when operational objectives require it. Ability to prioritize and to work without close supervision. PREFERRED REQUIREMENTS: Airframe and Powerplant Certification or equivalent FAA Airframe and Powerplant Mechanic's License. OTHER The selected applicant will be subject to a background check and drug testing.

At Niagara, we're looking for Team Members who want to be part of achieving our mission to provide our customers the highest quality most affordable bottled water. Consider applying here, if you want to: Work in an entrepreneurial and dynamic environment with a chance to make an impact. Develop lasting relationships with great people. Have the opportunity to build a satisfying career. We offer competitive compensation and benefits packages for our Team Members. Production OperatorPerforms a variety of tasks requiring knowledge of production processes and responsible for day to day operations associated with the production lines. Essential Functions Responsible for overall maintaining of a production line, including starting and stopping of all equipment (palletizers, carton makers, carton sealers, drop packers, injection, etc.) as applicable. Ability to perform minor adjustments to production equipment as directed. No mechanical work is to be performed without prior approval. Responsible for accurately completing and updating information forms and logs such as Machine Report, Quality Report, Downtime Report and Carton Top Load Report Ability to recognize unsafe conditions and actions and follow plant safety rules including safe lifting practices and safe machine operations. Personal protective equipment is to be used where required. Housekeeping: maintain general housekeeping in all areas of production, including the break rooms and rest rooms. Bale plastic, cardboard and contaminated bottles when needed; grind bottles when needed. Raw materials: keep bottle caps, labels, cartons, trays, tray and pallet wraps (plastic rolls), pallet glue for hot melt tanks, slip sheets, etc. in adequate amounts to ensure continuous smooth running of equipment and operation. Maintain quality requirements in accordance with company standards; accurately filling out hourly inspection sheets based on overall production quality. Responsible for recognizing and reporting all quality defects immediately. Ability to work in multiple areas of production with minimal supervision; perform relief duties when required Ability to troubleshoot minor production equipment issues in all areas and collaborate with maintenance team as necessary. Understanding of computer systems such as Oracle/MES or current order management system Comprehension of line flow and manufacturing process to maximize through put Ability to communicate issues clearly and concisely Regular and predictable attendance is an essential function of the job. Ability to work 12 hour shifts, day or night, on a rotating 2-2-3 schedule. Please note this job description is not designed to contain a comprehensive list of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without prior notice. Qualifications Minimum Qualifications: 2 Years - Experience in Field or similar manufacturing environment 2 Years - Experience in Position 0 Year - Experience managing people/projects Experience operating multiple manufacturing machines *experience may include a combination of work experience and education Preferred Qualifications: 4 Years - Experience in Field or similar manufacturing environment 4 Years - Experience working in Position 2 Years - Experience managing people/projects *experience may include a combination of work experience and education Competencies This position embodies the values of Niagara's LIFE competency model, focusing on the following key drivers of success: Lead Like an Owner Makes safety the number one priority Keeps alert for safety issues and escalates immediately Effectively prioritizes tasks based on department goals Shows respect to others and confronts interpersonal issues directly Prioritizes resolution of customer issues effectively Responds promptly and honors commitments to internal and external customers InnovACT Makes recommendations to continuously improve policies, methods, procedures, and/or products Demonstrates adaptability by reacting appropriately to unexpected changes in situations or circumstances Increases performance through greater efficiency Find a Way Seeks to develop technical knowledge through learning from other experts Understands interdepartmental impact of individual decisions and actions Seeks solutions rather than placing blame Empowered to be Great Consistently looks for ways to improve one's self through growth and development opportunities Communicates clearly and promptly up, down, and across Communicates effectively to manage expectations Education Minimum Required: High School Diploma or GED Preferred: Associate's Degree Certification/License: Required: N/A Preferred: N/A Foreign Language Required: None Required Preferred: None Required Benefits Our Total Rewards package is thoughtfully designed to support both you and your family: Regular full-time team members are offered a comprehensive benefits package, while part-time, intern, and seasonal team members are offered a limited benefits package. Paid Time Off for holidays, sick time, and vacation time Paid parental and caregiver leaves Medical, including virtual care options Dental Vision 401(k) with company match Health Savings Account with company match Flexible Spending Accounts Expanded mental wellbeing benefits including free counseling sessions for all team members and household family members Family Building Benefits including enhanced fertility benefits for IVF and fertility preservation plus adoption, surrogacy, and Doula reimbursements Income protection including Life and AD&D, short and long-term disability, critical illness and an accident plan Special discount programs including pet plans, pre-paid legal services, identity theft, car rental, airport parking, etc. Tuition reimbursement, college savings plan and scholarship opportunities And more! *********************************************** * *Los Angeles County applicants only** Qualified applicants with arrest or conviction records will be considered for employment in accordance with the Los Angeles County Fair Chance Ordinance for Employers, the California Fair Chance Act, and any other applicable local and state laws. Any employment agency, person or entity that submits a résumé into this career site or to a hiring manager does so with the understanding that the applicant's résumé will become the property of Niagara Bottling, LLC. Niagara Bottling, LLC will have the right to hire that applicant at its discretion without any fee owed to the submitting employment agency, person or entity. Employment agencies that have fee agreements with Niagara Bottling, LLC and have been engaged on a search shall submit résumé to the designated Niagara Bottling, LLC recruiter or, upon authorization, submit résumé into this career site to be eligible for placement fees.

Job Type: Full-Time; Non-Exempt Shift: Monday- Friday, 2:00 pm- 10:30 pm Hourly Rate: $15.00/hr. Who You Are: As a Production Technician, you will be responsible for the packaging and labeling of the finished goods at our cultivation and manufacturing centers. You will be responsible for the production of a variety of finished products including packaged, dried flower, pre-rolls, vape cartridges and vape pens, and infused products. Our production team is expected to maintain quality control measures to ensure high-quality products and will carry out day-to-day tasks including prepping, packaging, and labeling per standard operating procedures set by Curaleaf and our production management. What You Will Do: * Stage product and packaging supplies across various production lines to meet daily production schedule * Perform quality assurance protocols as designated by Curaleaf's procedures * Increase operational efficiency and reduce waste through ownership, teamwork, communication and collaboration * Perform in-process and post-process quality assurance, testing and conducting visual inspections to ensure all product meets or exceed Curaleaf's specifications and patient's expectations * Ensure 100% compliance involving proper weighing, data recording, product tracking and security throughout the entire packaging process * Operate in an efficient manner that also complies with all OSHA regulations, Curaleaf SOP's and all applicable required procedures * Ensure each product is properly labeled in compliance with state regulations * Work in a quick and efficient manner and strive to consistently increase productivity * Maintain the organization and cleanliness of the extraction room while performing all duties What You Will Bring: * High School Diploma or G.E.D minimum * Effective communication skills working in a team-based environment * Strong attention to detail skills working in a high-volume production environment * Strong work ethic and the ability to be punctual, reliable, and contribute to a positive, professional work environment * Ability to be trained on various production equipment, SOPs, and consistently meet performance expectations set by leadership * Ability to perform repetitive tasks for long periods of time Even Better If: * You have one year of manufacturing and packaging experience with a focus on ensuring product safety, consumer safety and satisfaction, and high product quality is strongly preferred Physical Requirements: * Allergen warnings, potential exposure to dust, pollen, and plant pathogens. * Exposure to cleaning solvents, such as high volumes of isopropyl alcohol. * Daily use of provided PPE, such as masks, hair nets, beard covers, respirators, boot covers, scrubs, non-slip shoes, and Tyvek suits as necessary. * Ability to work in confined spaces * Exposure to loud noises, including but not limited to air compressors, packaging equipment, and alarms. * Exposure to CO2 manufacturing procedures at OSHA approved CO2 levels. * High-stress tolerance, adaptable, flexible ability to work in an ever-changing environment

Join Barfield and Become a Part of the Adventure! If you are a talented Mechanical Technician interested in working in the exciting field of aviation, Barfield wants you! Barfield is more than just a prestigious name in the industry: it is subsidiary of Air France Industries KLM Engineering We are looking to hire a dedicated Mechanical Technician to join our team. The Mechanical Technician will support our Mechanical Department Duties and Responsibilities: Test, troubleshoot, repair, and calibrate units using schematics diagrams, Component Maintenance Manuals (CMM), and other documents such as Airworthiness Directives, Service Bulletins, and customer Engineering Orders. Inspect and test Mechanical Aircraft Components to identify defects and wear and tear areas. Disassemble, clean, and inspect Aircraft Component. Repair or replace damaged or worn components. Reassemble and test Mechanical units to ensure proper operation. Performs a variety of complicated tasks. Needs to be familiar with various Component Maintenance Manuals (CMM) practices and procedures. Reports to the lead person, supervisor, or manager. Requirements and Skills High School diploma or equivalent. Basic computer skills. Successfully completed technical training by a certifying educational institution or 1-2 years of bench experience in the field or related area. Reads, understands and, interprets directions of appropriate maintenance manuals to identify. Must be able to evaluate, troubleshoot, repair, and calibrate units using official documents. Must have knowledge and experience with mechanical tools, multimeters, micrometers, calipers, measuring indicators, and gauges. Must be able to work with little or no supervision. Ability to work with standardized tools and electric equipment. Ability to follow safety procedures and guidelines. Successful Factors Technical college, or Military training in their expertise. Knowledgeable, friendly, positive attitude, be a “Team Player”, always willing to learn new tasks, new skills and participate with peers. Share ideas to improve processes. You embody our values : CUSTOMER FOCUS We strive to provide the best services to our customers. INTEGRITY We are personally accountable for the highest standards of ethical behavior. TEAMWORK We are committed to a teamwork environment. ADAPTABILITY In an ever-changing world, we are adaptable to the required challenges. We offer a comprehensive total compensation and benefits package. For more information about us, please visit our website at ******************* Barfield is an equal opportunity employer. Equal Employment Opportunity is the Law. This law requires Barfield to post a notice describing the Federal laws prohibiting job discrimination. For information regarding your legal rights and protections, please click on the following link: Know Your Rights As a Federal Contractor, Barfield is required to participate in the E-Verify Program to confirm eligibility to work in the United States. For information please click on the following link: E-Verify. All qualified applicants will receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, or other legally protected status.

Requisition No: 860473 Agency: Department of Corrections Working Title: Engineering Technician IV - Statewide Pay Plan: Career Service Position Number: 70066666 Salary: $62,456.94 - $67,316.86 annually Posting Closing Date: 04/01/2026 Total Compensation Estimator Tool FLORIDA DEPARTMENT OF CORRECTIONS We Never Walk Alone Engineering Technician IV - WWTP This open competitive advertisement is for a Career Service position located at various Correctional Institutions in the Maintenance Department statewide. The mission of Facilities Management and Building Construction at the Florida Department of Corrections is to provide a safe, secure, and efficient environment for staff, inmates, and visitors. This is achieved through the effective management, maintenance, and construction of correctional facilities, ensuring they meet all regulatory standards and support the department's overall mission of public safety and rehabilitation. This position is not a telework position and is required to report to the FDC office in the area it serves. JOB DUTIES: This working position is responsible for the Waste/Wastewater Treatment Plant at a Correctional Institution both in operations and maintenance. This position also instructs inmates in the special skills necessary to operate a Water and Wastewater Treatment Plant through an apprentice on-the-job training program designed to develop experience and skills necessary to assume and fulfill the position of Operator of a water or sewer utility. * Operates and maintains Water Treatment and Wastewater Treatment Plants in compliance with DEP permits and regulations. * Conducts preventive maintenance for both plants, orders, and stocks necessary chemicals. * Repairs breakdowns at the operator level and troubleshoots specialized equipment such as compressors, pumps, air blowers, and chlorinators. * Cleans bar screens, grit chambers, settling, and sludge beds, and performs various water quality tests. * Prepares operational reports, maintains logs, and supervises inmates, preparing progress reports for their rehabilitation. BENEFITS: * Paid vacation, sick leave, and holidays. * Comprehensive health insurance and life insurance with accidental death and dismemberment benefits. * Supplemental Dental, Vision, Life, Disability and Hospitalization insurance. * Tuition-Free college courses. * Retirement Plans with the Florida Retirement System: * Pension Plan (Traditional Retirement Pension Plan) * Investment Plan (401(K)-Type Retirement Plan) * Deferred Retirement Option Program (Drop) * Deferred Compensation * Recently Retired? Beginning July 1, 2024, there is no longer a reemployment limitation; beginning with the 7th calendar month from the member's distribution date, there are no restrictions on working for an FRS employer. You will not be required to repay any prior distributions, and you may continue receiving distributions from the Investment Plan or Pension Plan without interruption. REQUIREMENTS: * A Class C Water and/ or Wastewater Treatment Plant Operator License or higher * A Valid Class E Driver's License Support of knowledge, skills, and abilities should be demonstrated on the application, in the education, in the work experience, in the work sample, in the interview and/or during reference checks. ADDITIONAL INFORMATION: BACKGROUND SCREENING REQUIREMENT The Florida Department of Corrections requires all job applicants and volunteers to pass a Level 2 background check as per Chapter 435, Florida Statutes. This check must be completed before they can start working or volunteering. EMPLOYMENT ELIGIBILITY The Florida Department of Corrections (FDC) only hires U.S. citizens and those authorized to work in the U.S. FDC uses E-Verify to confirm an employee's eligibility to work after completing the I-9 form. For online application issues, call the People First Service Center at **************. Applications will be accepted until 11:59 PM EST on the closing date. The State of Florida is an Equal Opportunity Employer/Affirmative Action Employer, and does not tolerate discrimination or violence in the workplace. Candidates requiring a reasonable accommodation, as defined by the Americans with Disabilities Act, must notify the agency hiring authority and/or People First Service Center (***************. Notification to the hiring authority must be made in advance to allow sufficient time to provide the accommodation. The State of Florida supports a Drug-Free workplace. All employees are subject to reasonable suspicion drug testing in accordance with Section 112.0455, F.S., Drug-Free Workplace Act. VETERANS' PREFERENCE. Pursuant to Chapter 295, Florida Statutes, candidates eligible for Veterans' Preference will receive preference in employment for Career Service vacancies and are encouraged to apply. Certain service members may be eligible to receive waivers for postsecondary educational requirements. Candidates claiming Veterans' Preference must attach supporting documentation with each submission that includes character of service (for example, DD Form 214 Member Copy #4) along with any other documentation as required by Rule 55A-7, Florida Administrative Code. Veterans' Preference documentation requirements are available by clicking here. All documentation is due by the close of the vacancy announcement. Location: