Mechanical engineer jobs in West Hempfield, PA - 364 jobs

Ainsley Search Group is hiring for a Manufacturing Engineer to join a fast-growing Manufacturer located in Chester County. This Manufacturing Engineer will report to the Director of Manufacturing, oversee the capex project and factory layout re-design, ROI and design, implement and improve manufacturing process (Machining and Assembly). This opportunity offers excellent compensation, benefit and growth, company would like to develop the ideal candidate to be the Manufacturing Manager in the future. Responsibilities: Report to the Director of Engineering and collaborate with cross functional teams, based on product specifications and quality standards to develop and implement manufacturing process across machining and assembly process. Establish rapport with manufacturing operators, act as the primary contact for technical questions regarding manufacturing process, equipment operations, provide training and guidance to operators as needed. Drives root cause investigation on issues regarding process, equipment, product quality, tooling etc, identify root causes and develop corrective and preventive measurement to reduce recurring quality and process issues. Collaborate with Quality team to investigate non-conformance, customer returns, analyze process and quality related issues and conduct root cause analysis, implement CAPA to reduce quality issues, process issues and re-work issues. Drives equipment reliability and safety, troubleshoot equipment failure and collaborate with maintenance team to improve reliability and safety of equipment and process. Conduct study and analysis on new capex investment, line expansion, factory layout to determine efficiency, cost, ROI, and yield. Drives CI across process, equipment, materials to further improve manufacturing efficiency, cost reduction and waste reduction, perform time study and SPC to identify opportunities for improvement. Perform process changeover in between customer projects, continue access process on materials, equipment, tooling and manpower. Provide hands-on training and coaching to product personnel on process, process improvement, changes, equipment set-up and maintenance, etc. Qualifications: Bachelor's degree in mechanical Engineer, industrial engineer, or related fields. Recent years of experience as a Manufacturing Engineer, industrial engineer or Process Engineer, exposure to high volume, automated manufacturing environment such as machining, assembly. Excellent communication and hands-on leadership skills. Solid knowledge of lean manufacturing, SPC, etc., strong in data analysis and problem solving. Experience in leading capex projects from study, design, installation, validation, to clouse out

What to Expect: Individual and Cross Functional Projects Throughout 2026 Internship Professional Career Development & Community Outreach Opportunities Final Project Overview Presentation with Executive Leadership Team We have an exciting internship opportunity with the Fenner R&D Engineering Team at Manheim, PA. The successful candidate will be responsible for assisting with and carrying out engineering assignments that support our capital engineer and or process engineering needs. The position reports to the Engineering Supervisor or Manager. As part of the Engineering Team, you will ……. S/he will be responsible for collaborating with various departments in order to: Assist Senior Engineering staff in obtaining an in-depth understanding of product design which allows for standard products and special customer requirements to be successfully designed and manufactured Takes part in determining the manufacturability of products through coordinated efforts with product suppliers, and/or manufacturing engineering and production with assistance from Senior Engineering staff. Interfaces and coordinates with the Lab and Manufacturing personnel on new product design projects to help ensure manufacturing needs are met with overview from Senior Engineering staff. Acts as a resource for technical questions, including appropriate research into new areas that are currently unfamiliar to us. R&D Projects: Amazon Product Development-Material Handling, Link Belt Next Generation, PDM-Drawing development Core Competencies Required Aptitude for Mechanical Design 3-D model in SolidWorks Basic understanding of Microsoft Office products Studies that align with Mechanical Engineering Education and/or Relative Experience: A minimum of 1 year of college or technical school in a related field. Exposure to Mechanical Engineering either through past full or part time employment or as part of the program they are enrolled in is a plus.

Job Description What to Expect: Individual and Cross Functional Projects Throughout 2026 Internship Professional Career Development & Community Outreach Opportunities Final Project Overview Presentation with Executive Leadership Team We have an exciting internship opportunity with the Fenner R&D Engineering Team at Manheim, PA. The successful candidate will be responsible for assisting with and carrying out engineering assignments that support our capital engineer and or process engineering needs. The position reports to the Engineering Supervisor or Manager. As part of the Engineering Team, you will ……. S/he will be responsible for collaborating with various departments in order to: Assist Senior Engineering staff in obtaining an in-depth understanding of product design which allows for standard products and special customer requirements to be successfully designed and manufactured Takes part in determining the manufacturability of products through coordinated efforts with product suppliers, and/or manufacturing engineering and production with assistance from Senior Engineering staff. Interfaces and coordinates with the Lab and Manufacturing personnel on new product design projects to help ensure manufacturing needs are met with overview from Senior Engineering staff. Acts as a resource for technical questions, including appropriate research into new areas that are currently unfamiliar to us. R&D Projects: Amazon Product Development-Material Handling, Link Belt Next Generation, PDM-Drawing development Core Competencies Required Aptitude for Mechanical Design 3-D model in SolidWorks Basic understanding of Microsoft Office products Studies that align with Mechanical Engineering Education and/or Relative Experience: A minimum of 1 year of college or technical school in a related field. Exposure to Mechanical Engineering either through past full or part time employment or as part of the program they are enrolled in is a plus.

Armstrong World Industries (AWI) is seeking motivated candidates for our Summer Engineering Internship opportunities based at our Corporate Campus in Lancaster, PA What's in it for you? As Engineering Intern, you will have the opportunity to utilize your technical savviness to gain a deep understanding of Armstrong products, processes, and test requirements. The opportunity to begin your career with the most innovative and forward-thinking building products company in the industry The opportunity to help transform the design and building of spaces, so that occupants, owners, operators, and communities can thrive, today and into the future R&D Mechanical Engineering Intern Program Offering Mechanical - Research & Development(R&D) Engineering Intern: Completing an assigned engineering project during the term of the internship Contributing to several ongoing R&D engineering projects Experience with and exposure to supporting the Project Management Life Cycle, including: Preparation of project specifications and requirements Project schedule coordination and utilization of Project Management tools Project execution, project closing activities, and sustainability initiatives Valuable insight into large-scale manufacturing facilities, equipment, and safe working practices 3D Modeling or Simulation Modeling - to predict process/material interactions Exposure to Sorting, conveying, combustion, sanding, fluid, and pneumatic transfer systems What will make you successful Outside-of-the-Box thinker Outstanding interpersonal and communication skills and a team-oriented mindset Capability to build and nurture relationships with other functions within AWI Proficiency with Microsoft Office products, particularly Excel, Word, and PowerPoint Excellent time management skills and ability to meet deadlines A track record of leadership through work, school, or extra-curricular activities Required Qualifications Must be currently pursuing a bachelor's degree in Mechanical Engineering (BSME) at an ABET accredited program AND be a maximum of 24 months away from graduation Minimum 3.0 GPA (cumulative, and within major) What Makes You Stand Out Previous internship in a manufacturing or R&D environment Autodesk 3D Modeling Autodesk Simulation experience

As part of our dynamic engineering development team, you will design, develop and test sophisticated RF/Microwave products. This will involve: * Support Product Design and Development. Lead the design, development and selection of hardware components utilizing mechanical engineering principles, theories, and techniques. Assigned duties may include design and development of specific modules, mechanisms, packaging, components, or subsystems to meet design requirements. Provide technical direction to design support personnel. * Perform Mechanical Analyses. Maintain up-to-date working knowledge of company standard analysis tools. Assure adequate analysis to achieve performance objectives. Perform static, dynamic, and heat transfer analyses of mechanical structures. Analyze data and document results. * Coordinate Validation of Design. Coordinate the fabrication and environmental testing of design hardware. Design and procure prototype hardware. Coordinate the environmental testing of hardware including: vibration, shock, thermal, fatigue, and others as required. Review and document test results. Assist in product transition to Production as required. * Prepare Documentation. Generate, review, and approve the technical content of drawings, engineering specifications, reports, and other documentation associated with the mechanical design. Prepare design review packages and present for internal review. * Support Continuous Improvement. Ensure compliance with CAES Quality System, Configuration Management and the Mechanical Design Process. Maintain up-to-date knowledge of developments in Mechanical Engineering disciplines. Recommend improvements that produce cost effective and producible designs. * Product Support. Generate Engineering Change Orders to maintain engineering documentation and incorporation of drawing changes of existing product documentation. * Other Duties. Make independent technical decisions on work consistent with objectives. Organizational support of Product Lifecycle Management (PLM) tools and processes. Assignments may include research and development of new techniques and materials as a result of independent study. Minimum: * BS Degree in Mechanical Engineering discipline with minimum 4 years of experience, or MS Degree with 2 years of experience * Working knowledge of 3D modeling software (e.g. Autodesk AutoCAD, Inventor, etc.) and finite element analysis applications (e.g. ANSYS, etc.). * Understanding of Geometric Dimensioning and Tolerancing (GD&T) * Understanding of drawing practices per ASME Y14.100 * This position requires access to technology, materials, software or hardware that is controlled by US export laws. In order to be eligible for this position, you must be a "US Person" under US export laws (or eligible for approval under a U.S. Government export license). * Ability to obtain and maintain a security clearance. Preferred: * Experience with complex integrated RF/Microwave assemblies and subsystems * Background of machined part 3D CAD model designs * Ability to estimate amount of time needed for design activities, and incorporate product cost during the initial design phase * Experience in electronic packaging of components in enclosures * Significant experience with developing 3D models for multi-subsystem complex systems * Excellent oral and written communication skills * Experience performing temperature analysis for design of complex systems * Understanding of design for passing harsh mil- aero environmental qualification requirements such as shock, vibration, and humidity * Experienced with following a structured design release process and involving appropriate members of the team at each step of the process * Experience working with a team to jointly develop a system during all phases of the system development lifecycle The application period for the job is estimated to be 40 days from the job posting date; however, this may be shortened or extended depending on business needs and the availability of qualified candidates. Job Posting Date: January 5,2026. BENEFITS OF WORKING FOR HONEYWELL In addition to a performance-driven salary, cutting-edge work, and developing solutions side-by-side with dedicated experts in their fields, Honeywell employees are eligible for a comprehensive benefits package. This package includes employer-subsidized Medical, Dental, Vision, and Life Insurance; Short-Term and Long-Term Disability; 401(k) match, Flexible Spending Accounts, Health Savings Accounts, EAP, and Educational Assistance; Parental Leave, Paid Time Off (for vacation, personal business, sick time, and parental leave), Paid Holidays, and this role may be eligible for a 9/80 schedule. The application period for the job is estimated to be 40 days from the job posting date; however, this may be shortened or extended depending on business needs and the availability of qualified candidates. Job Posting Date: January 5,2026. U.S. PERSON REQUIREMENTS Must be a US Citizen due to contractual requirements ABOUT HONEYWELL Honeywell International Inc. (Nasdaq: HON) invents and commercializes technologies that address some of the world's most critical demands around energy, safety, security, air travel, productivity, and global urbanization. We are a leading software-industrial company dedicated to introducing state-of-the-art technology solutions to improve efficiency, productivity, sustainability, and safety in high-growth businesses in broad-based, attractive industrial end markets. Our products and solutions enable a safer, more comfortable, and more productive world, enhancing the quality of life of people around the globe. THE BUSINESS UNIT Honeywell Aerospace Technologies (AT) products and services are found on virtually every commercial, defense, and space aircraft in the world. We build aircraft engines, cockpit and cabin electronics, wireless connectivity systems, mechanical components, and more, and connect many of them via our high-speed Wi-Fi offerings. Our solutions create healthier air travel, more fuel-efficient and better-maintained aircraft, more direct and on-time flight arrivals, safer skies and airports, and more comfortable flights, along with several innovations and services that reflect exciting and emerging new transportation methods such as autonomous and supersonic flights. Revenues in 2023 for Honeywell Aerospace Technology were $14B and there are approximately 21,000 employees globally.

TAIT partners with artists, brands, IP holders and place makers to bring culture-defining, never-before-seen experiences to life. With a legacy of innovation spanning over 45 years, TAIT has grown from pioneering in rock 'n' roll concert staging to setting the global standard for extraordinary live events and experiences through cutting-edge technology, precision engineering, and creative design. TAIT's 20 global offices have developed iconic productions and experiences in over 30 countries, all seven continents, and even outer space for renowned performers, theme parks, exhibits, and venues across the globe, including partnerships with Taylor Swift, Cirque Du Soleil, Royal Opera House, Nike, NASA, Bloomberg, Google, Beyoncé, and The Olympics **Position Purpose** Mechanical Design Engineers (MDE) at TAIT are responsible for project-based mechanical design work that focuses on specialized machinery, structures, and rigging systems for the entertainment technology industry. MDEs drive innovative technical solutions, while working within TAIT safety and quality processes, as well as leveraging TAIT standard design principles and practices. As part of the wider mechanical design and engineering team, this role will focus on owning specific subsections of projects, which we call elements. This role is a bridge between associate/entry-level roles (which focus on part-level drawings) and senior/experienced roles (which focus on project-level solutions). The MDE team collaborates across departments (project management, fabrication, procurement, field teams) to ensure project success, from "initial concept" through "opening night." **Essential Responsibilities / Accountabilities** + Collaborate with project teams to develop innovative and effective technical solutions that align with project objectives and exceed client expectations. + Plan and execute technical solutions to work within scope, schedule, and budget. + Apply TAIT design best practices to design for fit and finish, manufacturing efficiency, onsite assembly + disassembly, and packaging. + Identify and understand the underlying physics of complex problems to create successful technical solutions. + Identify and prioritize project specific requirements and constraints to drive technical solutions. + Apply TAIT Project Delivery best practices and processes including design reviews, project team meetings, use of planning systems/software, + Participate in client meetings and produce client-facing drawing packages as needed. + Communicate effectively through hand sketches, 2D CAD drawings and cross sections. + Efficiently generate robust and clean 3D models to support TAIT's collaborative design process. + Produce pitch studies, schematics, storyboards, weight studies, and other supporting tasks to advance the design + engineering process. + Identify appropriate timing and scale of prototyping to support design + engineering process. + Recognize aspects of project work requiring engineering rigor to collaborate with internal and external engineering review on assigned project work. + Identify long lead time items and work with purchasing department to procure project specific components and materials. + Use custom TAIT CAD tools as appropriate in design and detailing processes. + Maintain project documentation including drawing redlines and operation manuals as required. + Release assembly and part drawings to be manufactured internal to TAIT as well as through subcontracting vendors using appropriate dimensioning and tolerancing. + Efficiently solve technical issues as they may arise during fabrication, testing, and/or commissioning. + Support legacy TAIT equipment as required by project needs and/or support department requests. + Maintain awareness of standard of solutions within TAIT's markets, product lines, and platforms. + Maintain awareness of TAIT's markets and competition. To perform this position successfully, each essential responsibility/accountability must be fulfilled satisfactorily. Reasonable accommodation may be made to enable an individual with disabilities to perform the responsibilities and accountabilities outlined above. Other duties may be assigned to meet business needs. **Minimum Qualifications** + Formal degree in Technical Theater, Engineering, Architectural, Industrial Design, Machine Design, CADD preferred, or High School Diploma/GED and equivalent work experience listed below: + Design Experience: minimum 7 years with formal degree + Design Experience: minimum 9 years without formal degree + Background in 3D CAD modeling + Working knowledge of live entertainment technology + Experience working in a short-term, project-based environment + Success collaborating as part of a cross-functional team + Ability to be based in the Lititz, PA TAIT headquarters **Preferred Experience** + Parametric modeling, ideally using Autodesk Inventor + Building information modeling (BIM) + Design for manufacture (DFM), especially aluminum structures and electro-mechanical machines + Rigging, especially theatrical rigging, arena rigging, performer flying, or catenary systems + TAIT markets, especially concert touring and theme parks + TAIT technology, especially winches, trolleys, and other overhead machinery/structures **Working Conditions and Physical Effort** The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to sit and use hands to finger, handle, or feel objects, tools, or controls. The employee frequently is required to reach with hands and arms and talk or hear. Specific vision abilities required by this job include close vision, color vision, and peripheral vision. The employee regularly operates a computer, including typing, using a mouse or keyboard, and viewing the screen for extended periods. While the role does not require regular lifting or physical exertion, there may be occasional onboarding programs or training opportunities that create opportunities for more exposure to physical tasks or new environments (sites, venues, etc.) **Work conditions of the role are:** + Work conditions may involve moderate exposure to unusual elements such as dirt, dust, fumes, unpleasant odors, and/or loud noises. + Work environment involves some exposure to hazards or physical risks which require following basic safety precautions. + Must be able to wear and properly utilize appropriate personal protective equipment (PPE) to work within or visit areas where required. This includes safety glasses, reflective vest, ear plugs, safety toed shoes, and other PPE as required by the location. \#LI-AW1 TAIT is an equal opportunity employer fully committed to diversity and inclusion in the workplace. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran or any other protected characteristic as outlined by international, national, state, or local laws.

About the Role: The Mechanical Design Engineer plays a vital role in creating, developing, and optimizing mechanical tooling and systems that enhance manufacturing quality and efficiency. This position involves designing custom tools, fixtures, and components using advanced 3D CAD modeling, while collaborating with engineering, production, and quality teams to support new product launches and continuous improvement initiatives. The ideal candidate combines strong technical design expertise with practical problem-solving skills and a focus on precision, safety, and performance. Responsibilities: Design and develop mechanical tools, fixtures, jigs, and gauges to support production and assembly operations. Generate 3D CAD models and detailed drawings to ensure accuracy, manufacturability, and compliance with design standards. Support new product introductions through concept design, feasibility studies, and design validation. Collaborate with cross-functional teams to resolve design, quality, and process challenges. Manage tooling and design projects from concept through implementation, including cost estimates and sourcing coordination. Apply GD&T principles to ensure dimensional accuracy and repeatability in manufactured components. Conduct root cause analysis and apply problem-solving tools such as 8D, fishbone, and statistical analysis. Maintain design documentation and ensure compliance with internal quality management systems (QMS). Participate in design and process improvement initiatives leveraging Lean and Six Sigma methodologies. Promote workplace organization, safety, and adherence to 5S standards. Qualifications: Bachelors degree in Mechanical Engineering or a related technical discipline. 2 or more years of experience in mechanical design, tooling, or process engineering. Proficiency with 3D CAD software such as SolidWorks or equivalent. Strong understanding of mechanical systems, metal forming, and tool and die design principles. Ability to read and interpret engineering drawings and apply GD&T standards. Experience with inspection tools, measurement systems, and quality documentation. Strong project management and communication skills. Familiarity with manufacturing processes, process improvement, and cost estimation. High attention to detail, organization, and accuracy in design documentation. Desired Qualifications: Experience designing production tooling such as stamping dies, welding fixtures, and inspection gauges. Knowledge of PFMEA, process validation, and quality system requirements. Exposure to Lean Manufacturing, Six Sigma, or continuous improvement programs. Familiarity with procurement and vendor coordination for custom tooling and components. Strong interpersonal skills and the ability to collaborate effectively with technical and non-technical teams. Package Details Bonus' 401(k) 401(k) matching Dental insurance Health insurance Life insurance Paid time off Vision insurance

**Company Statement** Graham Packaging is a people, planet and values-based company and a leader in sustainable packaging manufacturing. From the kitchen to the laundry room, Graham Packaging is part of your everyday life. For employees at Graham, our Blue Culture is part of their everyday lives, too. In other words, Blue is how we do things here. At Graham, we are united by a clear vision. We know our part and help those around us know theirs, encouraging one another to continuously improve. We create a safe, challenging environment to innovate by supporting creative ideas and new ways of thinking. We take the initiative to cultivate our individual growth and help others do the same, while keeping ourselves and one another accountable. And we actively promote cooperation, collaboration, integrity and respect across regions and teams to foster an engaged, diverse and connected workforce. We value our employees, and a Blue Culture allows for the most rewarding employee experience as part of the Graham family. Blue is how we feel about what we do-together-to create a better tomorrow. Working at Graham means you lead constructively with clear goals, use diverse thinking to drive excellence, accountability, innovation, as well as demonstrating collaboration, embracing learning, and taking action for continuous improvement and growth. **Overview** Graham Packaging is seeking a mechanical engineer to design extrusion equipment for blow molding processes. This engineer will have a lead role in the development of an exciting new proprietary extrusion technology that is disrupting the plastic consumer packing industry. Graham Packaging is committed to being a leader in blow molding innovations and this engineer will be on the forefront of achieving that goal. Guided by program or project objectives, this engineer operates collaboratively and individually to achieve his/her objectives. The position is based at Graham Packaging's Global Technical Center in York, PA. **Responsibilities** **Essential Duties and Responsibilities** + Design components for simple to moderately complex extrusion systems + Perform design analysis on extrusion systems to ensure performance (i.e.: CFD for plastics, FEA, etc.) + Evaluate existing extrusion systems for optimization of durability, performance, and cost + Consult with Capital Engineers to create requirements and specifications for extrusion equipment, coordinate its prototype testing, and support its installation + Collaborate with Product Development and Process Engineering teams to ensure extrusion systems are delivering desired results for their blow-molded parts + Lead troubleshooting, problem solving, and failure analysis efforts related to extrusion components + Design experiments, conduct testing, collect data, analyze data with statistical software, and compose detailed reports on technical findings + Utilize instrumentation and data collection tools to measure and record physical quantities for the purpose of experimentation and solving moderate to complex problems **Core Proficiencies and Skills** + Highly skilled in mechanical design using software for solid modeling, FEA, and CFD (e.g.: Ansys Polyflow) + Strong understanding of numerous scientific and engineering principals including heat transfer, fluid flow, material properties, measurement, instrumentation, and basic control systems + Skilled in designing and conducting experiments + Skilled in utilizing systematic problem solving methods (e.g.: 8D) + Very good written and presentation skills + Able to travel approximately 25%, on average **Qualifications** **Education and/or Work Experience Requirements** + BS degree in Mechanical Engineering; other engineering degrees may be acceptable with demonstrated applicable skills + Minimum 5-7 years of engineering experience designing plastic extrusion equipment **Compensation Statement** The expected salary range for the position described in this posting is made in accordance with the legal mandates of certain jurisdictions within the United States. The final agreed-upon compensation is based on individual qualifications and experience. **Benefits Statement** Benefits include medical, dental, vision and basic life insurance. Employees are able to enroll in the company's 401K Employee Saving Plan and may participate in its Employee Wellness Program. Employees will also receive paid time off in accordance with company policy and state law requirements. **EEO Disclaimer** Graham Packaging is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, sex (including pregnancy), sexual orientation, religion, creed, age, national origin, physical or mental disability, gender identity and/or expression, marital status, veteran status or other characteristics protected by law. **Location : Physical Work Location Display Name** _York, PA_ **ID** _2025-8726_ **Category** _Engineering_ **Type** _Full-Time_ We believe in equal opportunity for all job candidates, and we do not discriminate on the basis of race, creed, color, ethnicity, national origin, religion, sex, sexual orientation, gender expression, age, physical or mental ability, veteran status, military obligations or marital status. Download these flyers to learn more about our company's policies, including our participation in E-Verify.

Company Statement Graham Packaging is a people, planet and values-based company and a leader in sustainable packaging manufacturing. From the kitchen to the laundry room, Graham Packaging is part of your everyday life. For employees at Graham, our Blue Culture is part of their everyday lives, too. In other words, Blue is how we do things here. At Graham, we are united by a clear vision. We know our part and help those around us know theirs, encouraging one another to continuously improve. We create a safe, challenging environment to innovate by supporting creative ideas and new ways of thinking. We take the initiative to cultivate our individual growth and help others do the same, while keeping ourselves and one another accountable. And we actively promote cooperation, collaboration, integrity and respect across regions and teams to foster an engaged, diverse and connected workforce. We value our employees, and a Blue Culture allows for the most rewarding employee experience as part of the Graham family. Blue is how we feel about what we do-together-to create a better tomorrow. Working at Graham means you lead constructively with clear goals, use diverse thinking to drive excellence, accountability, innovation, as well as demonstrating collaboration, embracing learning, and taking action for continuous improvement and growth. Overview Graham Packaging is seeking a mechanical engineer to design extrusion equipment for blow molding processes. This engineer will have a lead role in the development of an exciting new proprietary extrusion technology that is disrupting the plastic consumer packing industry. Graham Packaging is committed to being a leader in blow molding innovations and this engineer will be on the forefront of achieving that goal. Guided by program or project objectives, this engineer operates collaboratively and individually to achieve his/her objectives. The position is based at Graham Packaging's Global Technical Center in York, PA. Responsibilities Essential Duties and Responsibilities Design components for simple to moderately complex extrusion systems Perform design analysis on extrusion systems to ensure performance (i.e.: CFD for plastics, FEA, etc.) Evaluate existing extrusion systems for optimization of durability, performance, and cost Consult with Capital Engineers to create requirements and specifications for extrusion equipment, coordinate its prototype testing, and support its installation Collaborate with Product Development and Process Engineering teams to ensure extrusion systems are delivering desired results for their blow-molded parts Lead troubleshooting, problem solving, and failure analysis efforts related to extrusion components Design experiments, conduct testing, collect data, analyze data with statistical software, and compose detailed reports on technical findings Utilize instrumentation and data collection tools to measure and record physical quantities for the purpose of experimentation and solving moderate to complex problems Core Proficiencies and Skills Highly skilled in mechanical design using software for solid modeling, FEA, and CFD (e.g.: Ansys Polyflow) Strong understanding of numerous scientific and engineering principals including heat transfer, fluid flow, material properties, measurement, instrumentation, and basic control systems Skilled in designing and conducting experiments Skilled in utilizing systematic problem solving methods (e.g.: 8D) Very good written and presentation skills Able to travel approximately 25%, on average Qualifications Education and/or Work Experience Requirements BS degree in Mechanical Engineering; other engineering degrees may be acceptable with demonstrated applicable skills Minimum 5-7 years of engineering experience designing plastic extrusion equipment Compensation Statement The expected salary range for the position described in this posting is made in accordance with the legal mandates of certain jurisdictions within the United States. The final agreed-upon compensation is based on individual qualifications and experience. Benefits Statement Benefits include medical, dental, vision and basic life insurance. Employees are able to enroll in the company's 401K Employee Saving Plan and may participate in its Employee Wellness Program. Employees will also receive paid time off in accordance with company policy and state law requirements. EEO Disclaimer Graham Packaging is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, sex (including pregnancy), sexual orientation, religion, creed, age, national origin, physical or mental disability, gender identity and/or expression, marital status, veteran status or other characteristics protected by law.

Type: Independent Contractor (1099) Duration: Project Based, with potential for ongoing collaboration Kinsey's brands division is seeking a Product Design Engineer to lead product development initiatives on a contract basis. This 1099 role is ideal for a self-drive professional who excels in concept creation, supplier coordination, and product testing. The Product Design Engineer will work closely with internal and global manufacturing resources to design reliable, cost-effective concepts. Here are some key things we are looking for in an individual: Strong planning and organization skills Clear Verbal & written communication Self-motivation, dedication & discipline Leadership through design & engineering Proficient in design software (such as CAD, Adobe Creative Suite, etc.) Strong knowledge of the outdoor industry Avid participant in archery, firearms, hunting

Join our innovative thermal solutions team- named a Best Place to Work in PA! Advanced Cooling Technologies, Inc. (ACT) is a premier thermal solutions provider serving many diverse markets. Our products and technologies have become integral parts of numerous mission-critical devices, including life-saving MRI and CT scanners, US Military applications, weather and telecommunication satellites, exploratory space missions, and much more. We are proud to be doing work that really makes a difference in our world- and beyond! Position summary: The Product Development Engineer supports various phases of projects ranging from concept generation and initial design all of the way to final delivery hardware and volume production. The types of projects vary from exploratory trade studies to highly detailed thermal analysis, to the fabrication of complicated prototype assemblies and testing. At any given time, the Product Development Engineer is responsible for the success of multiple projects, providing the opportunity to work on all aspects of the product development cycle. Candidates that have a strong technical background with hands-on experience fabricating prototype hardware excel at this position. Responsibilities Include: * All aspects of initial product design including: * Innovative concept generation * Excel or hand calculation analytical analysis * 3-D CAD modeling (Solidworks) * CFD/FEA analysis * 2-D Drawing creation * Fabrication procedure and work instruction development * Working cohesively with a diverse group of engineers and technicians * Managing program schedules and budget * Frequent customer communication/interaction Requirements Our work environment demands a candidate with the ability to take on multiple responsibilities in a fast-paced environment. We are looking for team players who enjoy working with customers, vendors, and co-workers to provide the best service and solutions. The best candidates will be those who embrace new challenges, using critical thinking skills, and developing innovative solutions. * B.S. or M.S. degree in Mechanical Engineering or Aerospace Engineering. * Proficiency in using commercial CAD (Solidworks), FEA (Solidworks) and CFD software (Autodesk Simulation, Fluent, Comsol) * Hands-on experience with design for manufacturability (DFM) and prototype hardware fabrication and testing is a plus! * Good verbal and written skills. * Must be a US Person as defined by 22 C.F.R. §120.15? (U.S. Citizen, lawful permanent resident, refugee, or asylee) due to ITAR restrictions. We offer an attractive and competitive compensation/benefits package, which includes a profit-sharing bonus plan. Our work environment is comfortable, collaborative, and stimulating. Apply now to get started on a career with ACT! If you are looking for an opportunity to start a career with a growing company doing exciting and important work, please apply today! ACT is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a protected veteran, status as a qualified individual with a disability, or any other trait protected by law. E-verify employer.

Descripción Puesto en Samtec, Inc Founded in 1976, Samtec is a privately held, $950 million global manufacturer of a broad line of electronic interconnect solutions, including High-Speed Board-to-Board, High-Speed Cables, Mid-Board and Panel Optics, Precision RF, Flexible Stacking, and Micro/Rugged components and cables. Samtec Technology Centers are dedicated to developing and advancing technologies, strategies and products to optimize both the performance and cost of a system from the bare die to an interface 100 meters away, and all interconnect points in between. With 40+ international locations and products sold in more than 125 different countries, Samtec's global presence enables its unmatched customer service. THIS POSITION WILL BE LOCATED ONSITE AT SAMTEC - NEW ALBANY, IN Summary/Objective: The Product Engineer designs and develops within New Product or Sustaining Product Engineering. Essential Functions/ Responsibilities: Developing & writing the Engineering inputs for technical documentation; and adhere to all corporate engineering standards including but not limited to documentation, file management, part modeling, and part simulation. Works directly with Marketing and Sales to review opportunities and develop engineering cost analyses based on Product Scopes, work directly with purchasing, quality, manufacturing engineering, test engineering, process engineering, electroplating, suppliers, and other necessary groups as a cross-functional team to develop products and solutions. Make significant contributions to design, development, and validation of connector solutions (including but not limited to board, cable, power, high speed, and panel mount products). Works hands on to identify problems during new product development and/or when quality concerns arise. Effective use of Office365 including Outlook, Excel, PPT, SharePoint, etc. Work effectively with different levels and individuals inside and outside of the organization. “The responsibilities as defined are intended to serve as a general guideline for this position. Associates may be asked to perform additional tasks depending on strengths and capabilities” Required Experience 3 - 5 Year's experience in connector design/manufacturing required. Component, assembly design, and manufacturing experience may be consider in lieu of this. Engineering Design Software: SolidWorks, AutoCAD, etc. Simulation Software: FEA, CFD/Thermal Modeling, etc. is preferred, but not required. Must be able to handle multiple projects simultaneously as priorities can change quickly. Must have excellent communication, collaboration, and organizational skills. Must be able to sit/stand for at least 90 consecutive minutes, and not suffer from any sensory deprivation and/or paralysis of the limbs. Preferred Education: Bachelor's Degree in Mechanical Engineering, Electrical Engineering, or equivalent is required

at Samtec, Inc Founded in 1976, Samtec is a privately held, $950 million global manufacturer of a broad line of electronic interconnect solutions, including High-Speed Board-to-Board, High-Speed Cables, Mid-Board and Panel Optics, Precision RF, Flexible Stacking, and Micro/Rugged components and cables. Samtec Technology Centers are dedicated to developing and advancing technologies, strategies and products to optimize both the performance and cost of a system from the bare die to an interface 100 meters away, and all interconnect points in between. With 40+ international locations and products sold in more than 125 different countries, Samtec's global presence enables its unmatched customer service. THIS POSITION WILL BE LOCATED ONSITE AT SAMTEC - NEW ALBANY, IN Summary/Objective: The Product Engineer designs and develops within New Product or Sustaining Product Engineering. Essential Functions/ Responsibilities: Developing & writing the Engineering inputs for technical documentation; and adhere to all corporate engineering standards including but not limited to documentation, file management, part modeling, and part simulation. Works directly with Marketing and Sales to review opportunities and develop engineering cost analyses based on Product Scopes, work directly with purchasing, quality, manufacturing engineering, test engineering, process engineering, electroplating, suppliers, and other necessary groups as a cross-functional team to develop products and solutions. Make significant contributions to design, development, and validation of connector solutions (including but not limited to board, cable, power, high speed, and panel mount products). Works hands on to identify problems during new product development and/or when quality concerns arise. Effective use of Office365 including Outlook, Excel, PPT, SharePoint, etc. Work effectively with different levels and individuals inside and outside of the organization. “The responsibilities as defined are intended to serve as a general guideline for this position. Associates may be asked to perform additional tasks depending on strengths and capabilities” Required Experience 3 - 5 Year's experience in connector design/manufacturing required. Component, assembly design, and manufacturing experience may be consider in lieu of this. Engineering Design Software: SolidWorks, AutoCAD, etc. Simulation Software: FEA, CFD/Thermal Modeling, etc. is preferred, but not required. Must be able to handle multiple projects simultaneously as priorities can change quickly. Must have excellent communication, collaboration, and organizational skills. Must be able to sit/stand for at least 90 consecutive minutes, and not suffer from any sensory deprivation and/or paralysis of the limbs. Preferred Education: Bachelor's Degree in Mechanical Engineering, Electrical Engineering, or equivalent is required SAMTEC, Inc. is an Equal Opportunity Employer and committed to creating a diverse environment. All employment decisions at Samtec are based in business needs, job requirements and individual qualifications, without regard to race, color, religion or belief, national, social or ethnic origin, pregnancy or parental status, age, disability, sexual orientation, gender and/or gender identity/expression, marital status, past or present military service, family medical history or genetic information, or any other status protected by applicable laws. Privacy Policy: *****************************************************

Job Description Key Responsibilities Engineer out Safety hazards CNC program development and improvements for Lathes, VMC, HMC CNC Tooling selection Work holding / Fixture design Implementation of Lean Manufacturing principles Design cost out of manufacturing processes Develop training documentation Minimum Qualifications Bachelor's degree in Mechanical Engineering Minimum 2 years of CNC programming Strong mechanical and machine design skills Proven ability to analyze and improve manufacturing processes Strong organizational, communication, and interpersonal skills Preferred Qualifications 5+ years of engineering experience in a manufacturing environment Experience with 2D/3D CAD software (CREO preferred) Physical Requirements Must have full range of body motion. Certain operations require repetitive bending, squatting, and full arm extension. Manual lifting, not exceeding fifty (50) pounds, may be required. Able to visit various manufacturing environments. Amsted Rail's commitment to Equal Opportunity/Affirmative Action: Amsted Rail is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected veteran status, age, or any other characteristic protected by law. To review our EEO Policies or to request assistance please go to *************************** and select EEO Compliance/Statements. To learn more about us, please visit us online at ******************* #ff-dd

The importance of water to the health of our world can't be overstated. As the frequency and intensity of floods, droughts and storms increases, the water industry must continue to build resiliency and lead from the front. Together with our clients, we are thinking and doing things differently to help pre-empt and prepare for what's next. Be a part of this dynamic and committed team of diverse water specialists and drive change for your community. You'll be able to apply our powerful global network of skills and decades of experience to create positive water outcomes that respect nature and nurture communities. Who are we looking for? Our Northeast Water business is expanding, and we're excited to welcome several talented Project Engineers to our offices in Harrisburg, Bloomsburg, and King of Prussia, PA. This is your opportunity to make a meaningful impact on water, wastewater, utility, and infrastructure design projects that shape communities across the region. As a Project Engineer, you'll play a key role in delivering innovative solutions alongside a dynamic, multi-disciplinary team. In this role, you will assist with preparing technical reports, design drawings, contract documents, cost estimates, and permits. You'll lead and support client workshops focused on advancing technical studies and designs, while also developing project delivery strategies and job management plans to ensure compliance with QA standards. Your work will involve supporting pricing, estimating, scoping, and marketing strategies for new projects, as well as coordinating CAD teams to produce high-quality design and construction documents. You'll conduct field investigations and condition assessments to identify process improvements, manage communication on technical and contractual issues, and facilitate client meetings to keep projects on track. This is more than just a job-it's a chance to grow your career while contributing to sustainable water solutions that matter. If you're passionate about engineering excellence and ready to take on challenging, rewarding projects, we'd love to hear from you! Our Hybrid Work Model: Be part of the dynamic culture! Our workplace thrives on a hybrid model, combining in-office collaboration and flexibility. Join us in the office three days a week to contribute, connect and excel in our vibrant environment. Working with an energetic and high performing team, this position offers a variety of work and will see you involved in: Engineering Drawings: Create engineering drawings to support the communication, evaluation, and implementation of engineering solutions. Engineering Solutions Design: Contribute to the design of engineering solutions; design the feasibility testing approach and supervise its implementation to support the development and validation of engineering solutions. Health, Safety, and Environment: Follow the organization's health, safety, and environment (HSE) policies, procedures, and mandatory instructions to identify and mitigate environmental risks and risks to the well-being of self and others in the workplace. Identify patterns of risky behavior within the team and take appropriate action to resolve them, escalating serious issues as appropriate. Personal Capability Building: Develop own capabilities by participating in assessment and development planning activities as well as formal and informal training and coaching; gain or maintain external professional accreditation, where relevant, to improve performance and fulfill personal potential. Maintain an understanding of relevant technology, external regulation, and industry best practices through ongoing education, attending conferences, and reading specialist media. Research: Carry out a range of research activities either to support others or to fulfill the requirements of the role. Technical Troubleshooting: Support technical troubleshooting efforts, aiding in the quick and accurate identification, analysis, and resolution of technical issues with equipment and experiments. Project Management: Work within an established project management plan to achieve specific goals. Client & Customer Management (External): Help senior colleagues manage client and customer relationships by using relevant sales or client systems. What you will bring to the team: Bachelor's and/or Master's degree in Civil or Environmental Engineering Registered Pennsylvania Professional Engineer or ability to obtain it At least 3-7 years of municipal water experience including experience in the state of Pennsylvania; prior water and wastewater design experience with local municipalities a plus Stormwater design and MS4 planning a plus #LI-JK1 As a multicultural organization, we encourage individual achievement and recognize the strength of a diverse workforce. GHD is an equal opportunity employer. We provide equal employment opportunities to all qualified employees and applicants without regard to race, color, religion, genetic information, national origin, sex (including same sex), sexual orientation, gender identity, pregnancy, childbirth, or related medical conditions, age, disability or handicap, citizenship status, service member status, or any other category protected by federal, state, or local law.

Job Description Job Type: Full-time, Exempt Duration of role: Permanent 1 Reporting to: Senior Engineering Project Manager About Us At Tate we are passionate about everything we do. As an independent brand operating within Kingspan Group, a global plc group of companies, Tate has been recognized worldwide as an industry leader in the development and manufacture of data center infrastructure solutions and commercial office raised access floors, for over 60 years. With revenues of over $600m and growing, Tate plays a pivotal role in offering expertise in cutting edge design engineering in order to craft solutions, by working collaboratively with clients as a trusted partner. Tate continues to grow and expand, operating multiple manufacturing and commercial sites across the US, Europe, the Middle East, Asia, and Australia. We are excited about our fresh, dynamic, and inclusive team of experts working on new innovations and forward-thinking designs, as we remain a market leading player within our industry. We continue to invest heavily in the best available manufacturing tools and equipment needed to adhere to Tate's world class standards and in keeping with our Planet Passionate sustainability strategy, our focus is on having minimal climate impact. We are excited to potentially welcome you as part of our team as we continue to grow on a worldwide scale. About the Role We are seeking a proactive and technically skilled Project Engineer (Mechanically Biased) to support the delivery of manufacturing projects from concept through to completion. The ideal candidate will be comfortable working with minimal guidance, taking ownership of tasks, while also contributing effectively as part of a multidisciplinary project team. What You'll Do Support the planning, coordination, and execution of engineering aspects of projects, including design, installation, testing, and commissioning. Review and interpret drawings, specifications, and technical documents. Coordinate with mechanical, controls, and civil disciplines to ensure full project integration. Liaise with suppliers, contractors, and clients to ensure technical and schedule requirements are met. Monitor progress against project timelines and budgets; escalate risks or deviations as needed. Prepare documentation such as risk assessments, method statements, and technical reports. Ensure all work complies with relevant codes, standards, and safety regulations. Participate in design reviews, site meetings, and commissioning activities. Identify opportunities for process improvement or cost reduction. Additional Expectations Remain compliant with the Code of Conduct and Policies which includes the Kingspan Group Compliance Policy. Ensure that all duties related to product compliance are adhered to in accordance with the Product Compliance Policy, Laws, Regulations, and market demands. Responsible for all tasks to achieve compliance goals and demands of the Compliance Management System. Must raise concerns related to the Compliance Management System to their supervisor, manager, or any member of the Leadership Team, or through the confidential whistle blower service. What You'll Bring Bachelor's degree or equivalent qualification in Engineering or related field. 2+ years' experience in an industrial, manufacturing, or capital project environment. Familiarity with project documentation, commissioning processes, and regulatory standards. Experience with CAD software or electrical design tools is desirable. Excellent problem-solving and communication skills. Ability to manage priorities and work effectively with limited supervision. Willingness to travel to project sites as required. Competencies: Self-motivated, organized, and able to work independently. Collaborative mindset and able to work seamlessly in team environments. Practical, hands-on approach with attention to detail. Committed to safety, quality, and continuous improvement. What You'll Get Pay range: $80,000 USD to $110,000 USD. This role is eligible for a discretionary bonus. Career Scope and Advancement: As we grow, new positions and career opportunities arise, offering accelerated paths for the right candidates, locally and globally. World of Wellness Philosophy: We empower you to take charge of your health and well-being. You'll have access to a wide range of medical, dental, and vision benefits, along with personalized guidance from a “Health Advocate.” We also offer other supplemental options, including 401k, legal, disability, and theft insurance, to ensure your financial wellness. Corporate Social Responsibility: Through Planet Passionate we are determined to reduce our manufacturing carbon (CO2e) emissions to as close to zero as technically possible, together with halving carbon intensity in our primary supply chain. We are very involved in our community, and you will have ample opportunities to support us in creating a better world. Skills Development: Given the dynamic pace of our business and a strong collaborative environment, your new role will be diverse and multifaceted - allowing you to be more versatile and develop a broader skill set. Mentorship and development: At Tate, we don't believe in hierarchy, we work together as one team for one common goal. You will have access and exposure to our senior leaders and experts for learning in your role, and additionally mentorship for the future. Culture: We have a great team culture, highly collaborative, supportive, and social. Together we innovate, collaborate, take ownership, and strive for excellence. Stay connected with us on LinkedIn for insights into life at Tate. Join us in our mission to make a difference through exceptional solutions. Tate Inc. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to legally protected characteristics. We are committed to providing reasonable accommodations to qualified individuals with disabilities. Employment may be contingent upon completion of post-offer requirements in accordance with applicable law.

As part of our dynamic engineering development team, you will design, develop and test sophisticated RF/Microwave products. This will involve: + **Support Product Design and Development** . Lead the design, development and selection of hardware components utilizing mechanical engineering principles, theories, and techniques. Assigned duties may include design and development of specific modules, mechanisms, packaging, components, or subsystems to meet design requirements. Provide technical direction to design support personnel. + **Perform Mechanical Analyses** . Maintain up-to-date working knowledge of company standard analysis tools. Assure adequate analysis to achieve performance objectives. Perform static, dynamic, and heat transfer analyses of mechanical structures. Analyze data and document results. + **Coordinate Validation of Design** . Coordinate the fabrication and environmental testing of design hardware. Design and procure prototype hardware. Coordinate the environmental testing of hardware including: vibration, shock, thermal, fatigue, and others as required. Review and document test results. Assist in product transition to Production as required. + **Prepare Documentation.** Generate, review, and approve the technical content of drawings, engineering specifications, reports, and other documentation associated with the mechanical design. Prepare design review packages and present for internal review. + **Support Continuous Improvement.** Ensure compliance with CAES Quality System, Configuration Management and the Mechanical Design Process. Maintain up-to-date knowledge of developments in Mechanical Engineering disciplines. Recommend improvements that produce cost effective and producible designs. + **Product Support.** Generate Engineering Change Orders to maintain engineering documentation and incorporation of drawing changes of existing product documentation. + **Other Duties.** Make independent technical decisions on work consistent with objectives. Organizational support of Product Lifecycle Management (PLM) tools and processes. Assignments may include research and development of new techniques and materials as a result of independent study. **Minimum:** + BS Degree in Mechanical Engineering discipline with minimum 4 years of experience, or MS Degree with 2 years of experience + Working knowledge of 3D modeling software (e.g. Autodesk AutoCAD, Inventor, etc.) and finite element analysis applications (e.g. ANSYS, etc.). + Understanding of Geometric Dimensioning and Tolerancing (GD&T) + Understanding of drawing practices per ASME Y14.100 + This position requires access to technology, materials, software or hardware that is controlled by US export laws. In order to be eligible for this position, you must be a "US Person" under US export laws (or eligible for approval under a U.S. Government export license). + Ability to obtain and maintain a security clearance. **Preferred:** + Experience with complex integrated RF/Microwave assemblies and subsystems + Background of machined part 3D CAD model designs + Ability to estimate amount of time needed for design activities, and incorporate product cost during the initial design phase + Experience in electronic packaging of components in enclosures + Significant experience with developing 3D models for multi-subsystem complex systems + Excellent oral and written communication skills + Experience performing temperature analysis for design of complex systems + Understanding of design for passing harsh mil- aero environmental qualification requirements such as shock, vibration, and humidity + Experienced with following a structured design release process and involving appropriate members of the team at each step of the process + Experience working with a team to jointly develop a system during all phases of the system development lifecycle The application period for the job is estimated to be 40 days from the job posting date; however, this may be shortened or extended depending on business needs and the availability of qualified candidates. **Job Posting Date: January 5,2026.** **BENEFITS OF WORKING FOR HONEYWELL** In addition to a performance-driven salary, cutting-edge work, and developing solutions side-by-side with dedicated experts in their fields, Honeywell employees are eligible for a comprehensive benefits package. This package includes employer-subsidized Medical, Dental, Vision, and Life Insurance; Short-Term and Long-Term Disability; 401(k) match, Flexible Spending Accounts, Health Savings Accounts, EAP, and Educational Assistance; Parental Leave, Paid Time Off (for vacation, personal business, sick time, and parental leave), Paid Holidays, and this role may be eligible for a 9/80 schedule. The application period for the job is estimated to be 40 days from the job posting date; however, this may be shortened or extended depending on business needs and the availability of qualified candidates. **Job Posting Date: January 5,2026.** **U.S. PERSON REQUIREMENTS** Due to compliance with U.S. export control laws and regulations, candidate must be a U.S. Person, which is defined as, a U.S. citizen, a U.S. permanent resident, or have protected status in the U.S. under asylum or refugee status or have the ability to obtain an export authorization. **ABOUT HONEYWELL** Honeywell International Inc. (Nasdaq: HON) invents and commercializes technologies that address some of the world's most critical demands around energy, safety, security, air travel, productivity, and global urbanization. We are a leading software-industrial company dedicated to introducing state-of-the-art technology solutions to improve efficiency, productivity, sustainability, and safety in high-growth businesses in broad-based, attractive industrial end markets. Our products and solutions enable a safer, more comfortable, and more productive world, enhancing the quality of life of people around the globe. **THE BUSINESS UNIT** Honeywell Aerospace Technologies (AT) products and services are found on virtually every commercial, defense, and space aircraft in the world. We build aircraft engines, cockpit and cabin electronics, wireless connectivity systems, mechanical components, and more, and connect many of them via our high-speed Wi-Fi offerings. Our solutions create healthier air travel, more fuel-efficient and better-maintained aircraft, more direct and on-time flight arrivals, safer skies and airports, and more comfortable flights, along with several innovations and services that reflect exciting and emerging new transportation methods such as autonomous and supersonic flights. Revenues in 2023 for Honeywell Aerospace Technology were $14B and there are approximately 21,000 employees globally. Honeywell helps organizations solve the world's most complex challenges in automation, the future of aviation and energy transition. As a trusted partner, we provide actionable solutions and innovation through our Aerospace Technologies, Building Automation, Energy and Sustainability Solutions, and Industrial Automation business segments - powered by our Honeywell Forge software - that help make the world smarter, safer and more sustainable. Honeywell is an equal opportunity employer. Qualified applicants will be considered without regard to age, race, creed, color, national origin, ancestry, marital status, affectional or sexual orientation, gender identity or expression, disability, nationality, sex, religion, or veteran status.

TAIT partners with artists, brands, IP holders and place makers to bring culture-defining, never-before-seen experiences to life. With a legacy of innovation spanning over 45 years, TAIT has grown from pioneering in rock 'n' roll concert staging to setting the global standard for extraordinary live events and experiences through cutting-edge technology, precision engineering, and creative design. TAIT's 20 global offices have developed iconic productions and experiences in over 30 countries, all seven continents, and even outer space for renowned performers, theme parks, exhibits, and venues across the globe, including partnerships with Taylor Swift, Cirque Du Soleil, Royal Opera House, Nike, NASA, Bloomberg, Google, Beyoncé, and The Olympics **Position Purpose** Mechanical Design Engineers (MDE) at TAIT are responsible for project-based mechanical design work that focuses on specialized machinery, structures, and rigging systems for the entertainment technology industry. MDEs drive innovative technical solutions, while working within TAIT safety and quality processes, as well as leveraging TAIT standard design principles and practices. As part of the wider mechanical design and engineering team, this role will focus on owning specific subsections of projects, which we call elements. This role is a bridge between associate/entry-level roles (which focus on part-level drawings) and senior/experienced roles (which focus on project-level solutions). The MDE team collaborates across departments (project management, fabrication, procurement, field teams) to ensure project success, from "initial concept" through "opening night." **Essential Responsibilities / Accountabilities** + Collaborate with project teams to develop innovative and effective technical solutions that align with project objectives and exceed client expectations. + Plan and execute technical solutions to work within scope, schedule, and budget. + Apply TAIT design best practices to design for fit and finish, manufacturing efficiency, onsite assembly + disassembly, and packaging. + Identify and understand the underlying physics of complex problems to create successful technical solutions. + Identify and prioritize project specific requirements and constraints to drive technical solutions. + Apply TAIT Project Delivery best practices and processes including design reviews, project team meetings, use of planning systems/software, + Participate in client meetings and produce client-facing drawing packages as needed. + Communicate effectively through hand sketches, 2D CAD drawings and cross sections. + Efficiently generate robust and clean 3D models to support TAIT's collaborative design process. + Produce pitch studies, schematics, storyboards, weight studies, and other supporting tasks to advance the design + engineering process. + Identify appropriate timing and scale of prototyping to support design + engineering process. + Recognize aspects of project work requiring engineering rigor to collaborate with internal and external engineering review on assigned project work. + Identify long lead time items and work with purchasing department to procure project specific components and materials. + Use custom TAIT CAD tools as appropriate in design and detailing processes. + Maintain project documentation including drawing redlines and operation manuals as required. + Release assembly and part drawings to be manufactured internal to TAIT as well as through subcontracting vendors using appropriate dimensioning and tolerancing. + Efficiently solve technical issues as they may arise during fabrication, testing, and/or commissioning. + Support legacy TAIT equipment as required by project needs and/or support department requests. + Maintain awareness of standard of solutions within TAIT's markets, product lines, and platforms. + Maintain awareness of TAIT's markets and competition. To perform this position successfully, each essential responsibility/accountability must be fulfilled satisfactorily. Reasonable accommodation may be made to enable an individual with disabilities to perform the responsibilities and accountabilities outlined above. Other duties may be assigned to meet business needs. **Minimum Qualifications** + BA/BS/BFA in technical theater, engineering, architecture, industrial design, product design and 4+ years of experience working in a related technical field **OR** 7+ years of design experience in live entertainment technology or adjacent field + Background in 3D CAD modeling + Working knowledge of live entertainment technology + Experience working in a short-term, project-based environment + Success collaborating as part of a cross-functional team + Ability to be based in the Lititz, PA TAIT headquarters **Preferred Experience** + Parametric modeling, ideally using Autodesk Inventor + Building information modeling (BIM) + Design for manufacture (DFM), especially aluminum structures and electro-mechanical machines + Rigging, especially theatrical rigging, arena rigging, performer flying, or catenary systems + TAIT markets, especially concert touring and theme parks + TAIT technology, especially winches, trolleys, and other overhead machinery/structures **Working Conditions and Physical Effort** The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to sit and use hands to finger, handle, or feel objects, tools, or controls. The employee frequently is required to reach with hands and arms and talk or hear. Specific vision abilities required by this job include close vision, color vision, and peripheral vision. The employee regularly operates a computer, including typing, using a mouse or keyboard, and viewing the screen for extended periods. While the role does not require regular lifting or physical exertion, there may be occasional onboarding programs or training opportunities that create opportunities for more exposure to physical tasks or new environments (sites, venues, etc.) **Work conditions of the role are:** + Work conditions may involve moderate exposure to unusual elements such as dirt, dust, fumes, unpleasant odors, and/or loud noises. + Work environment involves some exposure to hazards or physical risks which require following basic safety precautions. + Must be able to wear and properly utilize appropriate personal protective equipment (PPE) to work within or visit areas where required. This includes safety glasses, reflective vest, ear plugs, safety toed shoes, and other PPE as required by the location. \#LI-AB TAIT is an equal opportunity employer fully committed to diversity and inclusion in the workplace. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran or any other protected characteristic as outlined by international, national, state, or local laws.

Who We Are: Advanced Cooling Technologies, Inc. (ACT) is a premier thermal solutions provider serving many diverse markets including Defense, Aerospace, High-Performance Computing, Power Electronics, Medical and HVAC industries. We provide thermal products and engineering services to the world's leading defense and commercial companies such as Intel, Hewlett Packard (HP), GE Healthcare, Google, Facebook, Lockheed Martin, Northrop Grumman, Boeing, and General Electric. We also conduct advanced research and development work for government agencies including NASA, DOD, and DOE. Our products and technologies have become integral parts of numerous mission-critical devices, from life-saving MRI and CT scanners to energy-efficient building HVAC systems to weather and telecommunications satellites, and even Lunar Rovers and Landers. ACT is strongly committed to our customers, employees, and our community. Innovation, Teamwork and Customer Care are our core values that drive the continuous growth of our company. Our skilled and dedicated staff is our strongest resource and the critical factor in our ongoing success. Position summary: The Product Development Engineer in our Vaporization and Refrigeration group supports various phases of Environmental Control Unit (ECU) and Liquid Chiller projects ranging from concept generation and initial design to prototype hardware fabrication and volume production. The types of projects vary from modifications of existing designs to "blank sheet of paper" development programs and advanced performance testing. At any given time, the Product Development Engineer is responsible for the success of multiple projects, providing the opportunity to work on all aspects of the product development cycle. Product Development Engineers work on a multi-disciplinary team including Electrical Engineering resources and CAD Designers to effectively develop complex systems. Candidates that have a strong technical background with experience in design for manufacturability of complex systems excel at this position. Responsibilities Include: * All aspects of initial product design including: * Innovative concept generation * Excel or hand calculation analytical analysis * Refrigeration (Vapor Compression) system design and component selection * Refrigeration schematic generation * Requirements and Verification Matrix (RVM) generation and review * 3-D CAD modeling (SolidWorks) * 2-D Drawing creation * CFD/FEA analysis for mechanical/thermal/hydraulic performance prediction * Fabrication procedure and work instruction development * Working with a diverse group of engineers and technicians * Managing program schedules and budget * Frequent customer communication Our work environment demands a candidate with the ability to take on multiple responsibilities in a fast-paced environment. We are looking for team players who enjoy working with customers, vendors, and co-workers to provide the best service and solutions. The best candidates will be those who embrace new challenges, using critical thinking skills, and developing innovative solutions. The ideal candidate will possess the following qualities: Initiative: Product Development engineers don't have a daily agenda given to them and are expected to take it upon themselves to work closely with customers, vendors and ACT personnel to fulfill projects goals and objectives. Technical knowledge: We are looking for a candidate who has a strong real-world engineering background, coupled with hands-on skills and fabrication and testing capabilities. Teamwork skills: As a member of the product development team, the ideal candidate must have the ability to give and receive encouragement and constructive criticism, communicate effectively, and work cooperatively with team members to achieve common goals. Critical thinking skills: The product development customer and projects vary widely, and the strategies and design approaches that worked for one program may be completely different for the next opportunity. Because of that, we need a curious individual who loves to dive in, experiment, and develop innovative solutions to new challenges. Desire to grow: The ideal candidate wants to be the best at their job and is never content with "good enough". They set lofty goals and constantly seek to improve themselves and expand their professional knowledge and skillset. They desire to sharpen their engineering and project management skills and grow in leadership ability and responsibility. ACT is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a protected veteran, status as a qualified individual with a disability, or any other trait protected by law. Requirements * US citizenship or permanent residency strongly preferred due to ITAR requirements * B.S. or M.S. degree in Mechanical Engineering or another relevant field * Basic understanding of refrigeration systems * Proficiency in using commercial CAD (Solidworks) and FEA (Solidworks) tools, along with refrigeration system design tools * 3-5 years of hands-on experience with design for manufacturability (DFM) and prototype hardware fabrication and testing * Good verbal and written communication skills