Mechanical engineering internship jobs in Minnesota - 371 jobs

The Head Disk Mechanical Team integrates heads and media for developing the next generation Seagate perpendicular magnetic recording (PMR) and Heat Assisted Magnetic Recording (HAMR) products. We work with Seagate design centers and component centers around the world to stage novel head disc media interfacial technologies to improve the tribological performance, areal density, and reliability of PMR and HAMR Hard Disc Drives (HDDs). About the role - you will: Gain foundational knowledge of HDDs, recording subsystems, and future technologies Gain understanding of collaborative effort with cross-functional teams including materials science, mechanical design, test software, and reliability engineering Participate in engineering and training activities with HDM team members, for example, HDD bench testing and data analysis Perform a variety of experiments in the lab using bench instruments, computer software, Python code, signal processing, and oscilloscopes, atomic force microscopes (AFM), and optical surface analyzers Help with running experiments that enable integration novel head and media technologies to improve the tribology of PMR and HAMR head disk interfaces Data analysis using Python, JMP, Matlab, Minitab and MS Excel Perform drive measurements, integration testing, and data analysis Document findings and present results in technical reports and team meetings About you: Uphold key Seagate values of integrity, inclusion, and innovation Excellent communication and teamwork abilities Ability to communicate and collaborate with global and cross functional teams Adaptable in fast-paced, multi-priority environments Detail-oriented, results-driven, and able to work independently Hands-on problem solver Effective communicator with robust interpersonal skills Highly motivated and self-directed. Work effectively with teams, while taking initiative and executing on independent tasks to generate results Your experience includes: Basic computer & presentation skills Intermediate technical background in computer programming or data analysis or experimental work GPA 3.0 or above Familiar with basic data analysis, running experiments, operating laboratory instruments, and preparing technical reports Programming and debugging experience Experience with characterization and analytical instruments like atomic force microscopes and scanning electron microscopes is a plus. Current student pursuing a BS or MS degree in mechanical or electrical engineering, physics, chemistry, materials science, chemical Engineering or equivalent, and returning to classes in Fall 2026 You might also have: MATLAB or Python experience is a plus Competency in MS office applications Experience with statistical analysis Experience with tribology, surface chemistry, lubrication, contamination control, material characterization (AFM, electron microscopes), and thin films is a plus Location: Our Shakopee campus is located 25 minutes southwest of Minneapolis in a setting with a rural vibe - it overlooks a horse racing track and stables, yet it has great entertainment venues close by as well. With wide-open spaces, the campus has plenty of space for running, biking, shooting some hoops or playing volleyball over lunch. If working out is your thing, the on-site fully equipped fitness center hosts wellness programs, tournaments and group workouts. Hungry? Seagate offers an on-site café with freshly sourced foods and specialty coffees, or if you prefer, drive to one of many restaurants just minutes away. The estimated base wage range for this position is $24 - $35/hr. The individual base wage is based on work location and additional factors, including job-related skills, experience, and relevant education or training. Seagate offers comprehensive benefits to its eligible Interns, including, but not limited to, medical, dental, vision, and participation in the employee stock purchase plan. Seagate also offers Interns 12 paid holidays and a minimum of 48 hours of paid sick leave. The benefits for this position are based on a 24 to 40-hour-per-week schedule for a full calendar year and may differ depending on work location and tenure with the Company. Location: Shakopee, United States Travel: None

Veranex has an exciting opportunity to intern with the Mechanical Engineering and Design Engineering Teams. You will be part of a team working to improve lives globally through healthcare innovation. You will participate in mechanical design and development activities through all phases of the medical device product development process, from the initial design effort, through testing and validation, and final manufacturing transfer. This role reports to the Manager of Mechanical Engineering and collaborates with Product Development & Engineering teams globally. The ideal candidate should be an innovative, creative, and well-organized self-starter, a good problem solver, collaborative, and passionate about enhancing patient care and advancing the healthcare industry. As a consultant, they will learn to be comfortable working with clients as a trusted partner, managing risk-based decisions in the interest of project success. They should possess good conceptional and analytical skills along with the ability to solve complex technical problems. Primary Responsibilities (with oversight): Maintain day-to-day communication with program managers and all appropriate program team members. Manage their own time and activities to meet project milestones. Assist in the design and development of complex electro-mechanical medical devices and equipment. Participate in a variety of manufacturing processes, including injection molding of plastics, machining methods, rapid prototyping techniques, etc. Assist in development of detailed computer-aided design (CAD) packages to include 3D data and 2D drawings. Collaborate with electrical engineers, manufacturing engineers, and industrial designers to develop technologies and designs. Support ideation sessions and fast to feasibility projects. Develop and execute prototype testing plans and protocols Assist in compliance with medical device regulations and standards. Functions as mechanical engineering team member on product development programs. Typical Minimum Required skills: 2-4 years college experience toward Mechanical Engineering, Biomedical Engineering, or Industrial Design AND tracking to receive a Bachelors degree (of Science, of Fine Arts, etc) in that discipline Any additional experience outside of academics with complex, electro-mechanical products is a plus Basic knowledge in Microsoft Office and SolidWorks Strong written and verbal communication skills. Strong attention to detail

We're looking for people who put their innovation to work to advance our success - and their own. Join an organization that ensures a more secure world through connecting and protecting our customers with inventive electrical solutions. Mechanical Engineering and Design Internship - Summer 2026 We're looking for people who put their innovation to work to advance our success - and their own. Join an organization that ensures a more secure world through connecting and protecting our customers with inventive electrical solutions. Early Careers at nVent Innovation, inclusion, and growth. Your future is bright at nVent, where your ambition meets our vision for a sustainable and electrified world. At nVent, we empower you to innovate, welcome you to bring your true self to work, and cultivate bold ideas that fuel both your personal and professional growth. Immerse yourself in a culture of positive energy, unwavering integrity, and respect-a perfect catalyst for launching a purposeful and vibrant career. Dare to dream big, anticipate continuous development, and connect with our dynamic, global community. Your unique skills and talents are key to making impactful strides in today's electrified world! Mechanical Engineering and Design Internship nVent's Mechanical Engineering and Design Intern will develop leadership and engineering skills through a variety of projects and experiences, formal & information training, and leadership opportunities. During their experience, Interns will have exposure to several different facets of the Enclosures segment, while gaining exposure and valuable development within a global organization. In this position, you will get to: Prepare product layouts with direction from engineering Design components and assemblies using 3D CAD system Adhere to engineering drafting and release standards Participate in the product development process, including design brainstorming and voice of customer activity Process Change Action documentation, including the development of bills of material Perform research and investigation to obtain missing information and to ensure all specifications are correctly presented on documentation Use FEA (finite element analysis) tools to analyze parts and assemblies in static and dynamic environments Research and present on a variety of current and next generation technologies Perform required calculations to ensure all dimensions, tolerances and other specifications are correct as represented on documentation What You Will Experience in this Position Your experience as an Engineering Co-Op goes beyond the day-to-day of your role. In addition to the support of your manager, you can expect to grow and develop through exposure to leadership, engaging in development opportunities, and networking with other early career professionals. Training & Development: Training and development is provided throughout your internship through on-the-job experiences and structured learning opportunities, fostering the development of business acumen and leadership skills at a global organization. Community: Join a community of other early career professionals as you launch your career. A peer-led committee helps to organize social, professional and service-related activities and events for interns and early career professionals. You will also be invited to join our Employee Resource Groups (ERG's) which offer special events, networking, professional development and volunteer opportunities throughout the year to promote inclusion and respect and to help us embrace our diversity. Mentorship & Networking: Build a network of peers, managers and senior leaders to support your career path and aid your growth. Gain exposure to nVent professionals at every level who will act as formal and informal mentors during your internship. YOU HAVE: Required Qualifications: Pursuing a Bachelor's degree in Mechanical Engineering or related field Juniors (Rising Seniors) preferred 3D Software modeling experience Proficient computer skills Competitive hourly pay for time worked Relocation and housing support is available for eligible candidates Co-ops receive paid time off, paid sick time, paid volunteer time, and paid holidays Co-ops who demonstrate outstanding performance may be offered a subsequent internship/co-op or full-time offer of employment with nVent Location: The Mechanical Engineering + Design Internship is located in Anoka, Minnesota Preferred Qualifications: Knowledge of design standards and manufacturing processes Basic knowledge/aptitude in mechanical, electrical or refrigeration for designing, assisting and directing the build of components and assemblies HVAC and/or sheet metal knowledge Skill using SolidWorks Ability to interpret a variety of instructions furnished in written, oral, diagram or schedule form Ability to organize, document, and schedule multiple simultaneous projects Skill in written and oral communication with the ability to interface with people across multiple functional areas WE HAVE: A dynamic global reach with diverse operations around the world that will stretch your abilities, provide plentiful career opportunities, and allow you to make an impact every day nVent is a leading global provider of electrical connection and protection solutions. We believe our inventive electrical solutions enable safer systems and ensure a more secure world. We design, manufacture, market, install and service high performance products and solutions that connect and protect some of the world's most sensitive equipment, buildings and critical processes. We offer a comprehensive range of systems protection and electrical connections solutions across industry-leading brands that are recognized globally for quality, reliability and innovation. Our principal office is in London and our management office in the United States is in Minneapolis. Our robust portfolio of leading electrical product brands dates back more than 100 years and includes nVent CADDY, ERICO, HOFFMAN, ILSCO, SCHROFF and TRACHTE. Learn more at ************** Commitment to strengthen communities where our employees live and work We encourage and support the philanthropic activities of our employees worldwide Through our nVent in Action matching program, we provide funds to nonprofit and educational organizations where our employees volunteer or donate money Core values that shape our culture and drive us to deliver the best for our employees and our customers. We're known for being: Innovative & adaptable Dedicated to absolute integrity Focused on the customer first Respectful and team oriented Optimistic and energizing Accountable for performance Benefits to support the lives of our employees Benefit Overview At nVent, we value our people and their health and well-being. We provide a broad benefits package with meaningful programs for eligible full-time employees that includes: Medical, dental, and vision plans along with flexible spending accounts, short-term and long-term disability benefits, critical illness, accident insurance and life insurance. A 401(k) retirement plan and an employee stock purchase plan - both include a company match. Other supplemental benefits such as tuition reimbursement, caregiver, personal and parental leave, back-up care services, paid time off including volunteer time, a well-being program, and legal & identity theft protection. At nVent, we connect and protect our customers with inventive electrical solutions. People are our most valuable asset. Inclusion and diversity means that we celebrate and encourage each other's authenticity because we understand that uniqueness sparks growth.

At DuPont, our purpose is to empower the world with essential innovations to thrive. We work on things that matter. Whether it's providing clean water to more than a billion people on the planet, producing materials that are essential in everyday technology devices from smartphones to electric vehicles, or protecting workers around the world. Discover the many reasons the world's most talented people are choosing to work at DuPont. Why Join Us | DuPont Careers (******************************************* At **DuPont** , our paid internship and co-op opportunities are designed to give students more than just a glimpse into the professional world-they're a launchpad for your future. You'll work on real, impactful projects alongside experienced DuPont professionals, applying what you've learned in the classroom to solve real-world challenges. Through this hands-on experience, you'll build essential skills, grow your network, and gain exposure to a collaborative, inclusive workplace that values innovation and leadership. You will have the opportunity to collaborate across teams and functions, gaining exposure to innovative technologies and diverse perspectives that drive real-world solutions. **As an Engineering intern or co-op, you'll:** + Embrace DuPont's core values in safety, sustainability, and innovation + Gain industrial experience and insight into our businesses, products, and customers + Work in team-based environments with mentorship and technical training + Participate in professional development opportunities tailored to your role Our student program offers both internships and co-op assignments tailored to fit your academic schedule and career goals. Assignment length and scope may vary by site and function, but every experience is designed to help you grow, contribute, and lead. Typical roles in manufacturing, operations, and business at DuPont span a wide range of exciting and impactful areas, including Manufacturing Technical and Process Engineering, Capital Projects, Automation and Process Control, Leveraged Engineering, Equipment Reliability and Maintenance, Continuous Improvement, Product Quality, and Technical Service. Summer interns and co-ops must be available from May - August. **Requirements** To be considered, the following requirements must be met: + Enrolled as a full-time student pursuing a Bachelor's or Master's degree in Chemical, Mechanical, Electrical or other engineering disciplines from an ABET accredited program + GPA of 3.0 or higher (out of 4.0 scale) + Legal right to work in the U.S. without restriction Join our Talent Community (**************************************************** to stay connected with us! DuPont is an equal opportunity employer. Qualified applicants will be considered without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability or any other protected class. If you need a reasonable accommodation to search or apply for a position, please visit our Accessibility Page for Contact Information (****************************************************** . DuPont offers a comprehensive pay and benefits package. To learn more visit the Compensation and Benefits page (********************************************************** . The Pay range for this role is $16.10 - $25.30 Hourly **How Base Pay is Determined:** DuPont has job leveling frameworks that help organize roles based on progressive levels of responsibility, proficiency and qualifications. Each role has an associated pay range (or an established pay rate for some roles) based on the competitive market in each country where we operate. Each individual's pay is based on a variety of factors, including their role and the associated pay range for that role, their geographic location (i.e., country, state, metropolitan area), as well as their skills, experience, education and certifications, and performance.

An exciting career awaits you At MPC, we're committed to being a great place to work - one that welcomes new ideas, encourages diverse perspectives, develops our people, and fosters a collaborative team environment. Responsibilities: As a Mechanical Engineer at a Marathon refinery, you can expect to become familiar with industry codes and best practices, build critical thinking skills, and gain an understanding of how all engineering disciplines work together as a cohesive team. You will also gain knowledge of various aspects of a refinery by working with a team of professionals who run a specific portion of the refining process. Most often, Mechanical Engineers will have an opportunity to work on more than one area of the refinery, leading to a broad understanding of how the plant operates. Finally, you will have the opportunity to expand your written and verbal presentation skills in a professional work environment. The majority of Mechanical Engineering co-ops and interns enter into the following positions: Area Refining Engineer/Project Engineers develop and use project management skills to create project scopes, estimates, and schedules. Once a project is developed and approved, you, as the project manager, will oversee the design effort and assist in the construction process. MPC will provide training and educational opportunities to help you develop your knowledge of other engineering disciplines. We are committed to developing engineers into professional project managers who can successfully manage projects of all sizes. Reliability Engineers support the refinery's Maintenance Department through design and development of equipment related improvements. Such improvements include root cause failure analysis, optimization of maintenance programs in rotating equipment (pumps, compressors, etc.), and troubleshooting fixed equipment (refinery pressure vessels, heat exchangers, piping systems, etc.). Reliability Engineers will also be continuously challenged to find new technology in design, materials and repair methods to achieve refinery goals of longer running times at lower costs. Qualifications: + Candidates must be majoring in Mechanical Engineering or Civil Engineering + Strong academic performance + Candidates must be authorized to work in the US on a full-time indefinite basis without the need for employment visa sponsorship now or in the future. + Positions are available spring, summer, and fall semesters + Availability for multiple work terms is preferred + A valid driver's license is required + Concurrent enrollment in a degree seeking program + Military experience a plus + MIN - $32.92 per hour / MAX - $41.67 per hour Learn more about Marathon Petroleum's benefits at ********************* As an energy industry leader, our career opportunities fuel personal and professional growth. Location: Findlay, Ohio Job Requisition ID: 00018185 Pay Min/Max: $0.00 - $999.99 Hourly Grade: HRLY1 Location Address: 539 S Main St Additional locations: Anacortes, Washington, Canton, Ohio, Catlettsburg, Kentucky, Detroit, Michigan, El Paso, Texas, Garyville, Louisiana, Kenai, Alaska, Mandan, North Dakota, Martinez CA Refinery, Robinson, Illinois, Salt Lake City, Utah, St Paul Park, Minnesota, Texas City, Texas, Wilmington, California Education: High School (Required) Employee Group: Full time Employee Subgroup: Intern Marathon Petroleum Company LP is an Equal Opportunity Employer and gives consideration for employment to qualified applicants without discrimination on the basis of race, color, religion, creed, sex, gender (including pregnancy, childbirth, breastfeeding or related medical conditions), sexual orientation, gender identity, gender expression, reproductive health decision-making, age, mental or physical disability, medical condition or AIDS/HIV status, ancestry, national origin, genetic information, military, veteran status, marital status, citizenship or any other status protected by applicable federal, state, or local laws. If you would like more information about your EEO rights as an applicant, click here (*********************************************************************************************************************************** . If you need a reasonable accommodation for any part of the application process at Marathon Petroleum LP, please contact our Human Resources Department at *************************************** . Please specify the reasonable accommodation you are requesting, along with the job posting number in which you may be interested. A Human Resources representative will review your request and contact you to discuss a reasonable accommodation. Marathon Petroleum offers a total rewards program which includes, but is not limited to, access to health, vision, and dental insurance, paid time off, 401k matching program, paid parental leave, and educational reimbursement. Detailed benefit information is available at mympcbenefits.com. The hired candidate will also be eligible for a discretionary company-sponsored annual bonus program. Equal Opportunity Employer: Veteran / Disability We will consider all qualified Applicants for employment, including those with arrest or conviction records, in a manner consistent with the requirements of applicable state and local laws. In reviewing criminal history in connection with a conditional offer of employment, Marathon will consider the key responsibilities of the role. About Marathon Petroleum Corporation Marathon Petroleum Corporation (MPC) is a leading, integrated, downstream energy company headquartered in Findlay, Ohio. The company operates the nation's largest refining system. MPC's marketing system includes branded locations across the United States, including Marathon brand retail outlets. MPC also owns the general partner and majority limited partner interest in MPLX LP, a midstream company that owns and operates gathering, processing, and fractionation assets, as well as crude oil and light product transportation and logistics infrastructure.

MCE-Lead Designer/Engineer About MCE: Michaud Cooley Erickson is a full-service engineering firm providing high quality mechanical, electrical, lighting, fire protection, security, technology systems and energy management solutions for our clients, as well as unprecedented commissioning to facilitate efficient operations. We are a thriving culture with sustainable growth opportunities providing Innovative Engineering with Impactful Experiences. Job Summary: The role of Lead Engineer/Designer is the main point of contact for the technical aspects of projects and a key contributor to company technical standards. They coordinate with the Project Manager to ensure that projects meet the requirements for scope, schedule, budget, and quality. Responsibilities: Develops in-depth and industry leading knowledge in least one area of subject matter expertise. Develops and refines company technical standards (specifications, details, schematics, design guidelines, and best practices related to their subject matter expertise. Actively attends seminars, training sessions, and factory tours related to their area of expertise. Acts as technical support resource on projects requiring their subject matter expertise. Actively mentors less experienced technical staff. Promotes, uses, and trains others in using the master design tools and standards. Works independently to produce technical designs based on criteria from the client and project manager. Develops and documents the owner's project requirements. Generates multiple design options that meet the owner's project requirements for consideration, including pros and cons for each solution. Researches and resolves non-standard code questions with the authority having jurisdiction. Finds creative solutions to help our architectural partners realize their vision. Able to assess and analyze existing systems. Has a working knowledge of all design specialties within their discipline. Maintains knowledge of current design trends and best practices. Provides on-going technical guidance to the design team. Delegates technical design work to members of the project design team. Ensures that the design meets the quality expectations set by the project manager. Ensures coordination between all design disciplines and design partners. Ensures that the project team completes the design on schedule. Leads the construction administration phase, including attending construction meetings. Ensures that the design team completes design work within the hours budgeted by the project manager. Identifies and resolves design issues to ensure that we complete projects within the budget. Notifies the project manager if design services are requested outside the scope of work. Ensures that the QA/QC process is followed and documented. Contributes to and follows master design standards. Requirements You Will Need to Have: Associate or bachelor's degree in mechanical/electrical engineering or related field from an accredited university or college At least 6 years of related building systems industry experience Proficient in Revit and/or AutoCAD Proficient in design software tools Microsoft Office Suite of products experience We Prefer that You Have: Licensed Professional Engineer (P.E.) certification Design your career and future with MCE! In return, you will enjoy a wide range of benefits that support your health and wealth, including: Great Medical, Dental, & Vision benefits Employer paid short term/long term disability and life insurance. 401(k) with generous employer match Paid community service day and floating holiday Flexible workplace options-in office and hybrid Monthly parking allowance or bus pass Salary Range: $89,400 - $129,400 annually. Individual employee compensation is determined with a wide variety of factors, including but not limited to, experience, education, knowledge, skills, geography, and performance. Depending on the position offered, employee may be eligible for other forms of compensation, such as annual incentives. Sponsorship is not available. Candidates must be legally authorized to work in the United States. MCE is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, creed, sex, sexual orientation, gender orientation, gender identity, national origin, disability, or protected Veteran status. Attention Recruitment Agencies: MCE does not accept unsolicited resumes from agencies. Please do not send resumes to our careers email or to any employees. MCE will not be responsible for any fees associated with unsolicited submissions. Only MCE's Human Resources Leadership can authorize third-party recruiting agreements. Any agreements made without proper authorization will not be recognized, and we will not be liable for any fees related to them. Thank you for your understanding.

Job Description The Mechanical Engineering Technician /R&D Lab Lead uses their advanced technical skills and hands-on experience to work closely with R&D Engineers during medical device development while providing leadership and direction for all R&D labs. They support project teams through device prototype building, test equipment and manufacturing equipment design and fabrication, 3D modeling and drafting, as well as supporting troubleshooting of mechanical designs. They utilize basic manual machining methods as well as 3D printing technologies to support prototype, test fixture, and manufacturing fixture development. They ensure that R&D labs are compliant with industry and company standards, and are well organized, well stocked, and ready for fast-paced engineering activities. DUTIES AND RESPONSIBILITIES: Assemble, rework, test, and troubleshoot mechanical components, assemblies, and prototypes for medical devices Manage centralized resource for 3D printing of prototype parts and assemblies, including ownership of 3D printing area to promote a clean and effective workspace, as well as material management and printer maintenance. Manage centralized resource for simple fixture and prototyping machining utilizing manual machining methods (mill, lathe, etc.). Manages machine shop area to promote a clean and effective workspace. Generate and refine 3D models and engineering drawings for fixtures, equipment, components, and device assemblies. Read, interpret, and assist in developing and refining assembly and test instructions, engineering prints, and schematics Set up, operate, troubleshoot and repair lab equipment, test equipment, and fixtures. Maintain and document equipment used in the ME lab and support other R&D lab owners as needed in these activities. Ensure R&D labs adhere to internal procedures, safety protocols and promote a clean and safe workplace environment Manage lab inventory, including components, tools, and consumables, for the ME and 3D print labs and support other R&D lab owners in these activities. Support audits and inspections by maintaining organized records and demonstrating lab compliance. Requirements Associate degree in Mechanical Engineering Technology or a related field; Bachelor's degree preferred. Minimum of 3 years of experience in a laboratory environment, preferably in the medical device industry. Strong leadership skills with experience managing a team or projects. Familiarity with mechanical testing methods, equipment, and regulatory standards. Excellent problem-solving abilities and attention to detail. Effective communication skills, both verbal and written. Ability to work collaboratively within a multidisciplinary team environment. Benefits Compensation: The expected salary for this position is between $35-40/hr, depending on experience, skills, qualifications. Health Care Plan (Medical, Dental & Vision) Retirement Plan with Company Match Paid Time Off, Personal Days, AND Birthday Holiday! Lifetime Membership Subsidy and Wellness Resources Life Insurance (Basic, Voluntary & AD&D) Family Leave (Maternity, Paternity) Short-Term & Long-Term Disability Taco Thursdays!!!

Duininck is a third-generation family-led company focused on building strong communities through our relationships with customers, employees, subcontractors and vendors. We have a diverse portfolio of businesses managing projects at any scale. From highways and municipal projects to commercial developments, excavation, underground utilities, and paving, we take pride in shaping the infrastructure that helps the communities we work in thrive. Our work is about more than construction; it's about supporting the communities where we live and work, creating opportunities for growth on our crews, and building lasting value for generations to come. Paid internship is based out of our new, state-of-the-art shop in Spicer, MN and comes with a strong benefits package including: * Competitive pay range of $22 to $24 per hour, based on experience * Per Diem / Housing (when applicable) * Internship bonus to apply toward tools or school expenses * 401(k) with company match, and more! This position with the Duininck Construction team offers the opportunity to gain hands-on mechanical experience, both in the shop and in the field, diagnosing and repairing heavy construction equipment. We are looking for an intern who enjoys problem-solving, learning by doing, and working with heavy construction machinery. The Role: * Perform maintenance and repairs on a variety of heavy equipment as directed by the maintenance schedule. * Conduct basic diagnostics to identify issues and make adjustments for safe, efficient operation. * Participate in scheduled preventive maintenance projects both in the shop and on job sites. * Maintain and organize tools, equipment, and workspace to support a safe working environment. * Follow OSHA and MSHA safety protocols at all times. * Complete tasks accurately as assigned by shop leadership and experienced technicians. Work Environment: * Work outdoors in a variety of weather conditions as well as in shop environments. * Walk, bend, kneel, lift, stretch, and sit for extended periods. * Lift and carry up to 50 lbs. * Regularly work extended or overtime hours depending on project needs. * Travel throughout Central & Western Minnesota, Northern Iowa, and the Eastern Dakotas. What we Look For: * Current enrollment in a 2-year diesel mechanics, construction equipment, ag equipment, or related technical program. * Strong mechanical aptitude and interest in hands-on problem solving. * Ability to maintain an organized, safe work area. * Own a basic mechanic tool set. * High level of energy, curiosity, and willingness to learn. * Strong team mentality and ability to work with a variety of people, personalities, and skill levels. * Willingness to work flexible hours including some weekends or holidays. Not sure you meet all the requirements? Apply to learn more! Duininck is an equal opportunity employer. Qualified applicants will receive consideration for employment without regard to race, creed, religion, color, national origin, sex, age, disability, genetics, marital status, sexual orientation, gender identity, protected veteran status or citizenship status. If you would like more information on your EEO rights under the law, click here.

Job Description Duininck is a third-generation family-led company focused on building strong communities through our relationships with customers, employees, subcontractors and vendors. We have a diverse portfolio of businesses managing projects at any scale. From highways and municipal projects to commercial developments, excavation, underground utilities, and paving, we take pride in shaping the infrastructure that helps the communities we work in thrive. Our work is about more than construction; it's about supporting the communities where we live and work, creating opportunities for growth on our crews, and building lasting value for generations to come. Paid internship is based out of our new, state-of-the-art shop in Spicer, MN and comes with a strong benefits package including: • Competitive pay range of $22 to $24 per hour, based on experience • Per Diem / Housing (when applicable) • Internship bonus to apply toward tools or school expenses • 401(k) with company match, and more! This position with the Duininck Construction team offers the opportunity to gain hands-on mechanical experience, both in the shop and in the field, diagnosing and repairing heavy construction equipment. We are looking for an intern who enjoys problem-solving, learning by doing, and working with heavy construction machinery. The Role: Perform maintenance and repairs on a variety of heavy equipment as directed by the maintenance schedule. Conduct basic diagnostics to identify issues and make adjustments for safe, efficient operation. Participate in scheduled preventive maintenance projects both in the shop and on job sites. Maintain and organize tools, equipment, and workspace to support a safe working environment. Follow OSHA and MSHA safety protocols at all times. Complete tasks accurately as assigned by shop leadership and experienced technicians. Work Environment: Work outdoors in a variety of weather conditions as well as in shop environments. Walk, bend, kneel, lift, stretch, and sit for extended periods. Lift and carry up to 50 lbs. Regularly work extended or overtime hours depending on project needs. Travel throughout Central & Western Minnesota, Northern Iowa, and the Eastern Dakotas. What we Look For: Current enrollment in a 2-year diesel mechanics, construction equipment, ag equipment, or related technical program. Strong mechanical aptitude and interest in hands-on problem solving. Ability to maintain an organized, safe work area. Own a basic mechanic tool set. High level of energy, curiosity, and willingness to learn. Strong team mentality and ability to work with a variety of people, personalities, and skill levels. Willingness to work flexible hours including some weekends or holidays. Not sure you meet all the requirements? Apply to learn more! Duininck is an equal opportunity employer. Qualified applicants will receive consideration for employment without regard to race, creed, religion, color, national origin, sex, age, disability, genetics, marital status, sexual orientation, gender identity, protected veteran status or citizenship status. If you would like more information on your EEO rights under the law, click here.

Long Prairie Packing Company LLC, an American Foods Group Company has an opportunity for a Mechanical Engineering Technician II. Using principles and theories of mechanical engineering and working under the direction of the lead engineer, perform the following duties: Read and review blueprints, schematics, and project designs to determine test specifications and procedures. Investigate and evaluate machinery and equipment used by Long Prairie Packing to diagnose faulty operation and reporting conclusions to the lead engineer to ensure continued operations. Analyze test results related to design or rated specifications and make modifications as necessary. Repair, rework or calibrate hydraulic and pneumatic systems. Use tools ranging from precision measuring instruments and electrical and electronic testing devices to common hand. Perform work to keep machines, machine parts, mechanical or electrical equipment, wiring, structures or building systems in repair. Pipe fit, insulate, weld, plumb, machine, align, balance, assemble, disassemble, reassemble, install, maintain, replace, change, connect, disconnect, repair, test, inspect, operate, diagnose, troubleshoot, clean, lubricate, adjust, replace, setup, tear down, carpentry, routine or preventative maintenance. Use tools ranging from common hand and power tools such as hammers, hoists, saws, drills, screwdrivers, wrenches to precision measuring instruments and electrical and electronic testing devices. Perform other duties as assigned. Must be able to perform all job functions safely in accordance with food safety and quality standards. Identify and locate parts/part numbers from machinery or equipment manuals or parts catalogs (e.g. Cryovac, overhead chains, rail switches, conveyors, saws, etc.) Perform basic welding (e.g. primarily tig; some mig and stick). Ability to identify good and bad welds. Support the lead engineer in designing plans for performance of routine preventive maintenance (e.g. grease bearings, lubricate, check fluid levels, replace filters, etc.) to ensure that machines run smoothly, building systems operate efficiently or the physical condition of buildings does not deteriorate. Assemble, disassemble, repair, or replace defective equipment or parts (e.g., change belts, gearboxes, etc.) Perform basic hydraulics (e.g. change motors, make hoses, etc.). Complete necessary paperwork (PM sheets, work orders, etc.). Assist in performing maintenance on scale equipment (e.g. portable, floor, and matrix hot/cold) in applicable areas. Review wiring diagrams and engineering plans for assembling and installing electrical and electronic units. Ensure adherence to design specifications and applicable codes and standards. Install electrical parts and hardware using soldering equipment and hand tools. Perform basic forklift maintenance (change tires, replace bushings, etc.). NOTE: this description is not intended to be all-inclusive. An employee may perform other related duties to meet the ongoing needs of the organization; these duties are considered marginal. Qualifications Minimum Qualifications (Required): Must be 18 years of age or older. Must be able to work in the United States without sponsorship. Diploma/GED. Two years of practical and theoretical knowledge/experience in mechanical engineering required, which may be obtained through course work, certifications, technical training programs, work experience and/or a combination of on-the-job experience and formal education. Prior experience using hand and power tools, precision measuring tools and the ability to read and work from drawings and blueprints. Must be able to work in a variety of work temperatures warm, hot, humid, cold, wet or with slippery surfaces at varied heights in and around moving equipment and parts with the use of personal protective equipment (PPE). Ability to work extended scheduled hours Monday through Saturday with daily overtime. Must be able to work overtime as required. Start times and hours vary based on production needs. Must be able to successfully complete training: Safety Safe Quality Food (SQF) Good Manufacturing Practices (GMPs) Hazard Analysis and Critical Control Point (HACCP) Standard Operating Procedures (SOPs) Food defense Sanitation Standard Operating Procedures (SSOPs) Lock out Tag out Forklift Pallet jack Preferred Qualifications: Prior maintenance experience in a USDA inspected beef, pork or poultry facility. Work history in the last 12 months. 6 months maintenance experience in a manufacturing environment. Knowledge, Skills, and Abilities: Knowledge of and ability to perform basic welding (e.g. primary tig; some mig and stick). Ability to identify good and bad welds. What We Offer: Base hourly range of $23.35 to $ 25.35 per hour. Comprehensive benefits packages include Medical, Dental, and Vision Insurance. 401(k) Disability Insurance Paid holidays Our company supports your career growth with ongoing learning and training programs. Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other legally protected status. Applicants with a disability who require a reasonable accommodation for any part of the application or hiring process can contact Human Resources at the location(s) where you are applying. We participate in the E-Verify program in certain locations as required by law. Summary Long Prairie Packing Company, LLC an American Foods Group Company is a privately held beef processing company located in Long Prairie, Minnesota. We appreciate our employees and reward them for a job well done. As a member of the team, you will find yourself challenged and contributing in a significant way to the success of the business, and you will be rewarded for that success. Check Out the Long Prairie, MN Area! Improve your quality of life by residing in Long Prairie, Minnesota, a rural city located in the center of Minnesota - A short drive from many of the best recreational areas in Minnesota, and not too far from the Twin Cities and the ever-famous Mall of America! Long Prairie's museums, scenic golf courses, and historic buildings will fulfill your diverse interests. The area also offers: Long Prairie Trails - 4 well-kept trails that extend throughout the entire city Lake Charlotte Beach which includes a swimming beach, fishing pier and boat launch, softball fields, and much more! Year-round community events that the whole family will love.

Long Prairie Packing Company LLC, an American Foods Group Company has an opportunity for a Mechanical Engineering Technician II. Using principles and theories of mechanical engineering and working under the direction of the lead engineer, perform the following duties: Read and review blueprints, schematics, and project designs to determine test specifications and procedures. Investigate and evaluate machinery and equipment used by Long Prairie Packing to diagnose faulty operation and reporting conclusions to the lead engineer to ensure continued operations. Analyze test results related to design or rated specifications and make modifications as necessary. Repair, rework or calibrate hydraulic and pneumatic systems. Use tools ranging from precision measuring instruments and electrical and electronic testing devices to common hand. Perform work to keep machines, machine parts, mechanical or electrical equipment, wiring, structures or building systems in repair. Pipe fit, insulate, weld, plumb, machine, align, balance, assemble, disassemble, reassemble, install, maintain, replace, change, connect, disconnect, repair, test, inspect, operate, diagnose, troubleshoot, clean, lubricate, adjust, replace, setup, tear down, carpentry, routine or preventative maintenance. Use tools ranging from common hand and power tools such as hammers, hoists, saws, drills, screwdrivers, wrenches to precision measuring instruments and electrical and electronic testing devices. Perform other duties as assigned. Must be able to perform all job functions safely in accordance with food safety and quality standards. Identify and locate parts/part numbers from machinery or equipment manuals or parts catalogs (e.g. Cryovac, overhead chains, rail switches, conveyors, saws, etc.) Perform basic welding (e.g. primarily tig; some mig and stick). Ability to identify good and bad welds. Support the lead engineer in designing plans for performance of routine preventive maintenance (e.g. grease bearings, lubricate, check fluid levels, replace filters, etc.) to ensure that machines run smoothly, building systems operate efficiently or the physical condition of buildings does not deteriorate. Assemble, disassemble, repair, or replace defective equipment or parts (e.g., change belts, gearboxes, etc.) Perform basic hydraulics (e.g. change motors, make hoses, etc.). Complete necessary paperwork (PM sheets, work orders, etc.). Assist in performing maintenance on scale equipment (e.g. portable, floor, and matrix hot/cold) in applicable areas. Review wiring diagrams and engineering plans for assembling and installing electrical and electronic units. Ensure adherence to design specifications and applicable codes and standards. Install electrical parts and hardware using soldering equipment and hand tools. Perform basic forklift maintenance (change tires, replace bushings, etc.). NOTE: this description is not intended to be all-inclusive. An employee may perform other related duties to meet the ongoing needs of the organization; these duties are considered marginal. Qualifications Minimum Qualifications (Required): Must be 18 years of age or older. Must be able to work in the United States without sponsorship. Diploma/GED. Two years of practical and theoretical knowledge/experience in mechanical engineering required, which may be obtained through course work, certifications, technical training programs, work experience and/or a combination of on-the-job experience and formal education. Prior experience using hand and power tools, precision measuring tools and the ability to read and work from drawings and blueprints. Must be able to work in a variety of work temperatures warm, hot, humid, cold, wet or with slippery surfaces at varied heights in and around moving equipment and parts with the use of personal protective equipment (PPE). Ability to work extended scheduled hours Monday through Saturday with daily overtime. Must be able to work overtime as required. Start times and hours vary based on production needs. Must be able to successfully complete training: Safety Safe Quality Food (SQF) Good Manufacturing Practices (GMPs) Hazard Analysis and Critical Control Point (HACCP) Standard Operating Procedures (SOPs) Food defense Sanitation Standard Operating Procedures (SSOPs) Lock out Tag out Forklift Pallet jack Preferred Qualifications: Prior maintenance experience in a USDA inspected beef, pork or poultry facility. Work history in the last 12 months. 6 months maintenance experience in a manufacturing environment. Knowledge, Skills, and Abilities: Knowledge of and ability to perform basic welding (e.g. primary tig; some mig and stick). Ability to identify good and bad welds. What We Offer: Base hourly range of $23.35 to $ 25.35 per hour. Comprehensive benefits packages include Medical, Dental, and Vision Insurance. 401(k) Disability Insurance Paid holidays Our company supports your career growth with ongoing learning and training programs. Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other legally protected status. Applicants with a disability who require a reasonable accommodation for any part of the application or hiring process can contact Human Resources at the location(s) where you are applying. We participate in the E-Verify program in certain locations as required by law. Summary Long Prairie Packing Company, LLC an American Foods Group Company is a privately held beef processing company located in Long Prairie, Minnesota. We appreciate our employees and reward them for a job well done. As a member of the team, you will find yourself challenged and contributing in a significant way to the success of the business, and you will be rewarded for that success. Check Out the Long Prairie, MN Area! Improve your quality of life by residing in Long Prairie, Minnesota, a rural city located in the center of Minnesota - A short drive from many of the best recreational areas in Minnesota, and not too far from the Twin Cities and the ever-famous Mall of America! Long Prairie's museums, scenic golf courses, and historic buildings will fulfill your diverse interests. The area also offers: Long Prairie Trails - 4 well-kept trails that extend throughout the entire city Lake Charlotte Beach which includes a swimming beach, fishing pier and boat launch, softball fields, and much more! Year-round community events that the whole family will love.

Basic Qualifications Candidates should demonstrate a thorough understanding of engineering technology. Engineering Interns must be enrolled in an accredited degree program in Computer Engineering, Systems Engineering, Software Engineering, Electrical Engineering, Mechanical Engineering or other related scientific or technical discipline with a preference for a standing of a sophomore or higher. Due to the nature of work performed within our facilities, U.S. citizenship is required. Responsibilities for this Position REPRESENTATIVE DUTIES AND TASKS: Apply your classroom-learned skills to a program supporting the defense of our country. GDMS has an immediate opening for an Engineering Intern to join our team. The position provides an opportunity to work on projects that support some of our nation's fundamental defense services. GDMS employees work closely with esteemed customers to develop solutions that allow them to carry out high-stakes national security missions. The selected candidate will work with collaborative teams on various technical projects associated with our core mission. In addition to receiving a competitive wage, the Engineering Intern will enhance their skill set by working among a talented and technically accomplished group of colleagues. Interns will also enjoy a flexible work environment where contributions are recognized and rewarded. #LI-Hybrid Salary Note This estimate represents the typical salary range for this position based on experience and other factors (geographic location, etc.). Actual pay may vary. This job posting will remain open until the position is filled. Combined Salary Range USD $0.00 - USD $0.00 /Yr. Company Overview General Dynamics Mission Systems (GDMS) engineers a diverse portfolio of high technology solutions, products and services that enable customers to successfully execute missions across all domains of operation. With a global team of 12,000+ top professionals, we partner with the best in industry to expand the bounds of innovation in the defense and scientific arenas. Given the nature of our work and who we are, we value trust, honesty, alignment and transparency. We offer highly competitive benefits and pride ourselves in being a great place to work with a shared sense of purpose. You will also enjoy a flexible work environment where contributions are recognized and rewarded. If who we are and what we do resonates with you, we invite you to join our high-performance team! Equal Opportunity Employer / Individuals with Disabilities / Protected Veterans

About Cretex Medical Cretex Medical is a family of companies that provides manufacturing and engineering services to medical device OEMs. We offer a complete range of end-to-end manufacturing capabilities, the latest technologies, and the talent to match any manufacturing or engineering challenge. Learn more at ********************** Responsibilities Quality Engineer Intern Position Summary The Quality Engineer Intern will be responsible for providing technical support focusing on Quality related projects. The intern will assist the Engineering department with projects from scope definition through implementation. This position will be located in Anoka, MN. This internship will be required to be on-site, working 40 hours/week. Quality Engineer Intern Duties and Responsibilities * Provide internal customer technical support * Part manufacturability technical support * Assist with the implementation of process and design improvements * Support and comply with the company Quality System, ISO, and medical device requirements * Read, understand, and follow work instructions and standard work * Partner with other business segments: sales/marketing, customer service, engineering, quality, and finance * Understand customer needs and the core business markets we serve Qualifications Quality Engineer Intern Qualifications * Enrollment in a four-year degree program for Manufacturing, Mechanical, or Industrial Engineering * Ability to read blueprints * Ability to use measuring devices * Demonstrate excellent interpersonal and team building skills to create effective working coworkers * Ability to follow through on commitments and holds team members accountable * Strong problem-solving skills * Microsoft Office proficiency (Outlook, Word, Excel, PowerPoint, Publisher) * Clear and effective verbal and written communication skills * Attention to detail and organizational skills * Ability to work in a fast-paced team environment * Ability to prioritize and multitask What to Expect from an Internship with Cretex Medical? Each summer, we are excited to offer interns countless opportunities to network, learn more about the Cretex family of businesses, and have fun! Here are some things you'll get to experience as an intern with Cretex Medical and its businesses: * Work with the latest technologies * Challenge yourself and grow your skills * Find opportunities to move across our family of businesses Cretex offers internships in many different areas, including Engineering, Human Resources, Information Technology, Marketing, Accounting, Business, and Production Operations. We encourage you to explore the many internship opportunities Cretex Medical could offer you. Internships are available in a variety of locations within the Minneapolis/St. Paul (Minnesota) metro area, including Elk River, Brooklyn Park, Bloomington, Coon Rapids, Anoka, and Dassel. If you have a location preference, please specify that in the job application questions. Here are some of the things that interns have said about working at Cretex: * "I enjoyed how integrated the interns were in the workflow. We were working on projects that made an impact for the company. I had opportunities to work with employees from all areas of the company as well as other interns." * "During my internship, I gained firsthand experience in project management, quality systems, and manufacturing best practices. I was able to grow my skills in design by focusing on creating more ergonomic processes for manufacturing. I enjoyed the learning experience and the relationships I developed." Cretex Intern Benefits: Cretex offers a wide range of benefits for interns including: * Eligible for Housing Stipend for Relocation * Eligible for Health and Wellness Benefits * Career Development Activities * Opportunities to Interact with Leadership * Company Events * Facility Tours * Summer Intern Event Applicants will receive consideration for employment regardless of their race, color, creed, religion, national origin, sex, sexual orientation, disability, age, veteran status, marital status, family status, status with regard to public assistance, or any other protected status as required by law. Our company uses E-Verify to confirm the employment and eligibility of all newly hired employees. To learn more about E-Verify, including your rights and responsibilities, please visit ********************* Pay Range USD $25.00 - USD $27.00 /Hr. Company Benefits Benefits: All Employees: Our 401k retirement savings plan with a company match contribution; onsite health clinics, discretionary holiday bonus program (based on years of service), Cretex University, 24/7 employee assistance program with access to five confidential visits with a licensed counselor at no cost, wellness program with incentives, an employee death benefit, and employee sick and safe leave are available to all Cretex employees. 20+hours: Cretex's medical benefit package includes: comprehensive medical insurance with access to virtual providers; dental insurance (Little Partners Dental benefit covers services 100 percent for children 12 and younger when seen by a Health Partners in network provider); vision insurance; a pre-tax health savings account, healthcare and dependent care pre-tax reimbursement accounts; paid holidays, paid time off; and our discretionary profit sharing program are available to employees working 20+ hours/week. 30+ hours: Parental Leave, accident and critical illness benefits, optional employee, spouse, and child life; short and long term disability; company provided life insurance; and tuition assistance programs are available to employees working 30+ hours per week. (Some benefits are subject to eligibility criteria.)

Job DescriptionSalary: $23.00 Horwitz is seeking motivated and professional students for our Engineering Internship Program. This hands-on program provides real-world experience across various engineering disciplines, including Estimating, Service, Preconstruction, Construction, and Design. Graduates/ Interns will have the opportunity to work alongside experienced engineers, project managers, and estimators, gaining valuable skills and insights in the field of mechanical engineering. RESPONSIBLITIES/DUTIES BY DEPARTMENT: These responsibilities generally describe the nature of each position and may not be all inclusive: Estimating Assist in reviewing construction drawings and specifications to help develop basic material and labor take-offs for mechanical systems. Support the preparation of cost estimates by organizing vendor quotes, updating Excel worksheets, and learning estimating software tools. Participate in jobsite walkthroughs and internal estimate review meetings to understand field conditions, scope alignment, and the overall estimating process. Service Assist with entering and organizing incoming service requests while learning how calls are reviewed, documented, and prioritized within the service department. Support dispatch and scheduling activities by helping track technician availability, job status updates, and parts-related follow-ups to ensure smooth workflow. Shadow service coordinators and leadership to observe customer communication, dispatch decision-making, and overall service operations. Preconstruction Manage and solicit Requests for Proposals (RFPs) for project planning. Learn to size and select key mechanical HVAC equipment. Attend job site meetings and walkthroughs, supporting the Preconstruction Manager. Assist in project estimating and gain insight into Horwitzs sales process, including equipment selection and procurement. Construction Join project managers on job site meetings and walkthroughs. Support project management on various projects by preparing O&M manuals, performing Revit modeling, and conducting load calculations. Provide additional support during vacation staffing to maintain project continuity. Design Perform BTU load calculations to assist in equipment sizing for specific projects. Use drafting software (e.g., Revit) to create permit and installation-level drawings. Conduct field visits with lead designers to document existing equipment and site details. Engage in team meetings and research to ensure code compliance and design accuracy. Perform other duties as assigned. Conduct yourself in accordance with Horwitz core values: Safe, Accountable, Professional, Motivated, Can Do and Curious. SKILLS/ABILITES: Strong verbal and written communication for collaborating with team members and attending meetings. Ability to analyze blueprints, conduct load calculations, and perform detailed data entry. A demonstrated interest in HVAC, building controls, and mechanical systems is a plus EDUCATION/EXPERIENCE: Enrolled in or graduated with a relevant engineering program/degree (Mechanical Engineering, Electrical Engineering, Construction Management, or a related field).

The Kinetic Group is a world leader in the design, manufacturing, and distribution of small caliber ammunition under the iconic brands B&P, CCI, Federal Premium, Fiocchi, HEVI-Shot, Remington and Speer. We have domestic ammunition manufacturing facilities in Minnesota, Idaho, Arkansas, and Missouri, and service law enforcement, government agencies and sporting enthusiasts throughout the world. Today, The Kinetic Group is a part of the Ammo+ division of The Czechoslovak Group (CSG), which holds a diverse portfolio of companies in the defense, security, automotive, aerospace and rail industries. At The Kinetic Group, our interns play a vital role in advancing our mission to deliver high-quality, reliable ammunition to customers worldwide, offering you a unique chance to make a real impact in an industry fueled by precision and passion. As the Quality Engineer Intern you will have the opportunity to support our Quality Engineering team at Federal Ammunition. This position reports to the Quality Manager and is based out of our Anoka, MN office. What you'll do: Create work instructions and/or operating procedures for new and existing equipment and products. Complete time studies and capacity analysis for bottleneck equipment. Document machine change over tasks and troubleshooting guides to improve machine uptime. Support the Quality Engineering and Operations staff in process improvement activities Experience you bring: Engineering student in an accredited technical college or university. Prefer Manufacturing, Mechanical or Industrial Engineering Proficient in Microsoft Office applications Excellent written and oral communication skills Excellent interpersonal, problem solving, organizational, and time management skills Proficient at handling ambiguity and dealing with multiple priorities Continuous improvement and results oriented Strong interest in working for Federal Ammunition / The Kinetic Group You might have: Hands on experience with Six Sigma tools and lean manufacturing concepts CAD experience (SolidWorks) Statistical problem solving skills such as DOE using Minitab Small Caliber ammunition manufacturing experience Experience using a variety of gages and/or measurement systems Generate reports and summaries of data and work performed. Perform process capability studies as needed. Perform root cause analysis on manufacturing issues and implement corrective actions. Additional Information: Shift: Monday-Friday (8-9 hour) days Summer Internship: May-August Got questions? We've got answers! 👉 Explore our FAQ Page: ***************************************************** Work Environment: Employee work assignments may include tasks working with and/or exposure to potentially hazardous areas, including flammables and explosives. Safety training is provided to all employees to ensure compliance with company and federal regulations. Pay Range: Hourly Rate: $22.00 - $26.00 The actual annual salary offered to a candidate will be based on variables including experience, geographic location, education, and skills/achievements, and will be mutually agreed upon at the time of offer. We offer a highly competitive salary, comprehensive benefits including: medical and dental, vision, disability and life insurance, 401K, PTO, tuition reimbursement, gear discounts and the ability to add value to an exciting mission! Our Postings are not intended for distribution to or use in any jurisdiction, country or territory where such distribution or use would violate local law or would subject us to any regulations in another jurisdiction, country or territory. We reserve the right to limit our Postings in any jurisdiction, country or territory. Equal Opportunity Employer Minorities/Females/Protected Veteran/Disabled

At The Berg Group, the Construction Project Engineer Intern will act as a support to our project teams for the summer. The intern will work onsite in our corporate office in Chaska, MN and work directly with and have the opportunity to learn from our experienced Project Management Team. The Construction Project Engineer Intern should be perusing a degree in Construction Management, or a similar filed as well as have a passion for learning the subcontractor industry. Essential Functions Develop an understanding of the responsibilities of a Project Engineer within the construction industry and specifically within a specialty subcontractor Gain exposure to construction methods and terminology both in the field and in the office Participate in the team approach to estimating, bidding, and construction of a project Interact and understand the relationships between various parties of a construction contract including owners, architects, project managers, subcontractors, and suppliers Achieve proficiency in understanding and interpreting plans, specifications, contracts, schedules, and other construction documents and schedule Demonstrate the ability to read, assemble and prepare detailed technical documents common to the construction industry Position Breakdown Project Management: 50% Individual project work/problem solving: 25% Field: 15% Safety: 10% Qualifications Minimum Requirements Minimum of 2 years education from an accredited college, or university Has worked at least 1 summer within the construction industry Strong written, verbal, and interpersonal communication skills Proficiency in computer word processing, spreadsheet, and other job-relevant software Possess excellent problem solving and multi-tasking skills. Ability to work efficiently and provide leadership for project coordination

Ryan Companies has an exciting opportunity to join our team as a Project Engineer Intern! This internship is available as a co-op running from May 2026 - December 2026 in Minneapolis. Some things you can expect to do: Assist the project team in the completion of designated projects while focusing on learning construction industry processes, procedures, and Ryan business policies. Gain a working understanding of budgets, cost accounting, invoices, contracts, and change orders. Develop a first-hand understanding of job-site coordination, scheduling, quality control and safety. To succeed in this role, you must have: Must have a high school diploma or equivalent Must be pursuing a bachelor's or advanced degree in Construction Engineering/Management or closely-related field Able to work 40 hours per week You will really standout if you: At least one summer of construction work experience Have a general knowledge of estimating techniques and cost control methods Can perform mathematical calculations Can read and understand contracts, specifications and architectural and engineering drawings Strong written and verbal communication skills Eligibility: Positions require verification of employment eligibility to work in the U.S Compensation: The hourly wage is $20-$24/hour . The hourly rate may vary within the anticipated range based on factors such as the ultimate location of the position and the selected candidate's knowledge, skills, and abilities. Ryan Companies is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. Non-Solicitation Notice to Recruitment Agencies: Ryan Companies kindly requests that recruitment agencies and third-party recruiters do not submit unsolicited resumes or candidate information to any Ryan Companies employee or office. Ryan Companies will not be responsible for any fees or expenses associated with unsolicited submissions. If recruitment services are required, we will reach out directly to agencies on our approved vendor list. We appreciate your understanding and cooperation.

SOLV Energy is an engineering, procurement, construction (EPC) and solar services provider for utility solar, high voltage substation and energy storage markets across North America. The Intern - HV Project Engineer intern (Field) supports the design, administration, and execution of high-voltage (HV) and EPC project activities to achieve project profitability, compliance, and schedule goals. This role provides hands-on experience across engineering, procurement, document control, commissioning, and field support for utility-scale solar and BESS projects. Summer 2026 Internship. This role is located full-time on a jobsite in Los Banos, CA. Specific location details and expectations will be discussed during the interview process. : *This job description reflects management's assignment of essential functions; it does not prescribe or restrict the tasks that may be assigned Position Responsibilities and Duties: Contract & Compliance Support Review PPAs, Generator Interconnection Agreements, Utility Interconnection requirements, contract requirements, System Impact and Facility Studies, and Owner Engineer requirements to ensure project compliance. Assist in developing preliminary engineering guidance documents, material specifications, and detailed Bills of Materials (BOM). Procurement & Vendor Coordination Work with Procurement to specify main circuit equipment; review vendor quotes for technical compliance. Assist with vendor selection, approval drawings, and expediting; verify specifications are met and make recommendations. Project Engineering & Field Support Participate in functional testing as a witness; support substation energization and PV energization/initial synchronization. Demonstrate and maintain safe work practices in energized substations and field environments. Project Controls & Document Management Update and maintain drawing sets, specifications, and document logs (submittals, RFIs, approvals, expediting). Prepare document distributions to subcontractors and maintain RFI logs within CMS systems. Assist with maintenance and updates of CPM schedules; determine weekly labor production quantities. Input data for labor cost reports and field quantity surveys; support project filing system maintenance. Assist with project documentation. Participate in regular team meetings/calls and take accurate meeting minutes. Complete other responsibilities as assigned. Performance Objectives Adherence to Company policies and Corporate Procedures Manual. Efficient work within SOLV Energy's business processes. Contribution to project profitability and on-schedule completion. High-quality deliverables; integrity and excellence of completed work. Strong customer/client satisfaction and positive team collaboration. Implementation of business development support tasks as assigned. Demonstrated growth in professional skills and participation in staff development/training. Minimum Skills or Experience Requirements: Engineering, Construction Management, or Architectural degree completed or in progress; or equivalent experience. Ability to read and understand plans, specifications, and technical studies. Strong understanding of scope with the ability to independently review technical design. Basic estimating and scheduling skills (Primavera P6 familiarity is a plus). Effective written and verbal English communication skills. Strong organizational skills with the ability to prioritize and coordinate multiple tasks. Ability to use independent judgment and be a self-starter. Proficiency in office practices, procedures, and tools (MS Office); drafting and general computer skills desirable. Knowledge of dispatching methods, HV engineering practices, and utility-scale solar/substation basics. Flexible schedule to support 24/7 operations. Physical Demands & Environmental Conditions Frequent stooping, bending, crouching, reaching, handling, sitting, standing, walking, and lifting 20+ lbs. Constant finger dexterity; ability to see details at close range and at a distance; hear and talk; possess depth perception. Occasional climbing and carrying; proximity to moving mechanical parts; work in high exposed places. Occasional exposure to dust and fumes, electric shock, radiation, and toxic/caustic chemicals. SOLV Energy Is an Equal Opportunity Employer At SOLV Energy we celebrate the power of our differences. We are committed to building diverse, equitable, and inclusive workplaces that improve our communities. SOLV Energy prohibits discrimination and harassment of any kind against an employee or applicant based on race, color, age, religion, sex, sexual orientation, gender identity or expression, marital status, national origin, or ethnicity, mental or physical disability, veteran status, parental status, or any other characteristic protected by law. Compensation Range: $20.00 - $22.00 Pay Rate Type: Hourly SOLV Energy does not accept unsolicited candidate introductions, referrals or resumes from third-party recruiters or staffing agencies. We require all third-party recruiters to communicate exclusively with our internal talent acquisition team. SOLV Energy will not pay a placement fee to any third-party recruiter or agency that has not coordinated their recruiting activity with the appropriate member of our internal talent acquisition team. In addition, candidate introductions or resumes can only be submitted to our internal talent acquisition recruiting team if a signed vendor agreement is already on file and the third-party recruiter or agency has received formal instructions from our internal talent acquisition team to submit candidates for a particular job posting. Any unsolicited candidate introductions, referrals or resumes sent by third-party recruiters to SOLV Energy or directly to any of our employees, or received through our website or career portal, will be considered property of SOLV Energy and will not be eligible for a placement fee. In the event a third-party recruiter submits a resume or refers a candidate without a previously signed vendor agreement, SOLV Energy explicitly reserves the right to pursue and hire the candidate(s) without financial liability to such third-party recruiter. Job Number: J12592 If you're interested in a meaningful career with a brighter future, join the SOLV Energy Team.

An exciting career awaits you At MPC, we're committed to being a great place to work - one that welcomes new ideas, encourages diverse perspectives, develops our people, and fosters a collaborative team environment. Responsibilities: As a Mechanical Engineer at a Marathon refinery, you can expect to become familiar with industry codes and best practices, build critical thinking skills, and gain an understanding of how all engineering disciplines work together as a cohesive team. You will also gain knowledge of various aspects of a refinery by working with a team of professionals who run a specific portion of the refining process. Most often, Mechanical Engineers will have an opportunity to work on more than one area of the refinery, leading to a broad understanding of how the plant operates. Finally, you will have the opportunity to expand your written and verbal presentation skills in a professional work environment. The majority of Mechanical Engineering co-ops and interns enter into the following positions: Area Refining Engineer/Project Engineers develop and use project management skills to create project scopes, estimates, and schedules. Once a project is developed and approved, you, as the project manager, will oversee the design effort and assist in the construction process. MPC will provide training and educational opportunities to help you develop your knowledge of other engineering disciplines. We are committed to developing engineers into professional project managers who can successfully manage projects of all sizes. Reliability Engineers support the refinery's Maintenance Department through design and development of equipment related improvements. Such improvements include root cause failure analysis, optimization of maintenance programs in rotating equipment (pumps, compressors, etc.), and troubleshooting fixed equipment (refinery pressure vessels, heat exchangers, piping systems, etc.). Reliability Engineers will also be continuously challenged to find new technology in design, materials and repair methods to achieve refinery goals of longer running times at lower costs. Qualifications: + Candidates must be majoring in Mechanical Engineering + Strong academic performance + Candidates must be authorized to work in the US on a full-time indefinite basis without the need for employment visa sponsorship now or in the future. + Positions are available spring, summer, and fall semesters + Availability for multiple work terms is preferred + A valid driver's license is required + Concurrent enrollment in a degree seeking program + Military experience a plus + MIN - $32.31 per hour / MAX - $40.89 per hour Learn more about Marathon Petroleum's benefits at ********************* As an energy industry leader, our career opportunities fuel personal and professional growth. Location: Findlay, Ohio Job Requisition ID: 00018186 Pay Min/Max: $0.00 - $999.99 Hourly Grade: HRLY1 Location Address: 539 S Main St Additional locations: Anacortes, Washington, Canton, Ohio, Catlettsburg, Kentucky, Detroit, Michigan, El Paso, Texas, Garyville, Louisiana, Kenai, Alaska, Mandan, North Dakota, Martinez CA Refinery, Robinson, Illinois, Salt Lake City, Utah, St Paul Park, Minnesota, Texas City, Texas, Wilmington, California Education: High School (Required) Employee Group: Full time Employee Subgroup: Intern Marathon Petroleum Company LP is an Equal Opportunity Employer and gives consideration for employment to qualified applicants without discrimination on the basis of race, color, religion, creed, sex, gender (including pregnancy, childbirth, breastfeeding or related medical conditions), sexual orientation, gender identity, gender expression, reproductive health decision-making, age, mental or physical disability, medical condition or AIDS/HIV status, ancestry, national origin, genetic information, military, veteran status, marital status, citizenship or any other status protected by applicable federal, state, or local laws. If you would like more information about your EEO rights as an applicant, click here (*********************************************************************************************************************************** . If you need a reasonable accommodation for any part of the application process at Marathon Petroleum LP, please contact our Human Resources Department at *************************************** . Please specify the reasonable accommodation you are requesting, along with the job posting number in which you may be interested. A Human Resources representative will review your request and contact you to discuss a reasonable accommodation. Marathon Petroleum offers a total rewards program which includes, but is not limited to, access to health, vision, and dental insurance, paid time off, 401k matching program, paid parental leave, and educational reimbursement. Detailed benefit information is available at mympcbenefits.com. The hired candidate will also be eligible for a discretionary company-sponsored annual bonus program. Equal Opportunity Employer: Veteran / Disability We will consider all qualified Applicants for employment, including those with arrest or conviction records, in a manner consistent with the requirements of applicable state and local laws. In reviewing criminal history in connection with a conditional offer of employment, Marathon will consider the key responsibilities of the role. About Marathon Petroleum Corporation Marathon Petroleum Corporation (MPC) is a leading, integrated, downstream energy company headquartered in Findlay, Ohio. The company operates the nation's largest refining system. MPC's marketing system includes branded locations across the United States, including Marathon brand retail outlets. MPC also owns the general partner and majority limited partner interest in MPLX LP, a midstream company that owns and operates gathering, processing, and fractionation assets, as well as crude oil and light product transportation and logistics infrastructure.