Microelectronics technician jobs near me - 61 jobs

ATV / Motorsport Test Technician - Raymond, OH Support Research Team with communication, coordination, planning, and instrumentation of data equipment to customer vehicles. Installing data equipment onto customer vehicles, with the ability to troubleshoot as needed. Communicating with customers: Email and phone calls, to establish interest and availability. Coordinating visits with customers to install data equipment. Aligning multiple customers for one trip. Create trip itineraries to booking flights, hotels, rental cars, and arranging all logistics for customer visits. Additional: Ride/drive ATVs and SxSs at closed test courses and public/private areas. Perform vehicle testing per outlined test procedures and requirements. Assemble and disassemble complete vehicles using engineering drawings, service manuals, and communicate with engineering staff. Perform vehicle maintenance/inspections/basic diagnostics. Be attentive to detail during testing and identify concerns/problems as they arise. Communicate/document concerns with project leaders, utilizing a high level of detail and a clear understanding of the situation/problem. Perform vehicle tear down for part confirmation and sub-component section evaluations. Maintain a clean, organized, and safe working environment.

Amentum is seeking an Electronics Technician B for a position on Kauai, HI to independently or under minimum supervision and assignment from Lead Technician, provide contracted operational and maintenance support services to the Pacific Missile Range Facility (PMRF) customer. Electronics Technician responsibilities encompass, operating, maintaining, troubleshooting, repairing, calibrating, modifying, testing and installing telecommunications systems and associated networking components and cabling. Technician should be experienced in telecommunications technologies for voice, video and data systems or their industry equivalents that are assigned to PMRF communications facilities and assets. Responsibilities Specific assignments and responsibilities include but are not limited to the following areas: Sets-up, checks-out, operates, monitors, and maintains systems and equipment for Range Operations support. Responds to evolving operational environments requirements when directed. Perform periodic inspections and maintenance tasks in accordance with published procedures and/or OEM guidelines. Documents results of all maintenance actions in systems and equipment records. Perform troubleshooting and repair of systems/equipment by reading and interpreting electronic/mechanical schematics and using simple and complex tools and test equipment. Install, check-out, and or bench test, calibrate and perform acceptance tests on new and relocated systems and equipment, as directed. Perform Communications Security (COMSEC) functions including accounting, loading, and destruction and courier services for classified cryptographic materials and items. Maintain Telecommunications Inside Cable Plant and Major Battery Back-up Systems. Occasional travel for operations and maintenance support at other locations throughout the State of Hawaii to include at sea for extended periods. Performs other duties as required. Working Environment/ Physical Activities Environment Electronics Shop and Radio Frequency field environments Operations Command & Control Center Travel to and work at remote site locations to include at sea for extended periods. Physical Activities Must be able to lift, carry, install and remove electronics equipment and peripherals up to 50 lbs. Must be able to climb elevated towers and work in sub-floor areas and crawl spaces in performing maintenance inspections and troubleshooting tasks. Positions: Walking/Standing; Crawling & Kneeling; Repeated Stooping; Sitting; Climbing Pushing/ Pulling: Over 50lbs Environmental: Customer Contact; Extended Work Day; Confined Work Area; Office Laboratory; Field Assignment; Inclement Weather Minimum Qualifications Education High School or equivalent AS Degree in related field or equivalent training, e.g. 2 Year Technical School or Navy "A" school with either school specializing in Basic Electricity and Electronics Systems. Soldering certificate or equivalent training inclusive within curriculum of a technical school such as a Navy A school or from a commercial firm. Experience Five years of progressive experience in a related field with a minimum of two year's experience operating and maintaining telecommunications for voice, video and data along with related networking systems and equipment. Radio Frequency (RF) to include but not limited to Transmission & Antenna systems for Ground Radio, Microwave, Satellite, and other associated telecommunication technologies. Telecommunications Inside Cable Plant, Main and Intermediate Distribution Frame and Cable Record keeping. Major Battery Back-up and power distribution system experience desired. Must be able to use and interpret the results of test equipment used in telecommunications, video and networking fields such as O-scopes, RF Power meters, Analyzers, Voltage multi-meters, Bit Error Rate Testers (BERT), Time Domain Reflectometers, Toners/Tracers Basic Electricity & Electronics theory and applications with emphasis in telecommunications and network troubleshooting and repair. Proficiency in reading and interpreting schematic diagrams for troubleshooting and repair. Must have a soldering certificate or equivalent training from a commercial firm, technical school or Navy school. Must be familiar with OSI 7 Layer model. Windows based OS and LINUX platforms Must possess the following PC skills: Word; Excel; Outlook, Power Point; Windows Security Clearance Must be able to obtain and maintain a Secret US Government Clearance. Note: US Citizenship is required to obtain and maintain a Secret Clearance. Applicants selected either must currently possess a Secret clearance or will be subject to a US Government Security Investigation and must meet eligibility requirements to obtain clearance prior to commencement of employment and maintain a security clearance for access to classified information or Closed/Restricted Areas throughout duration of employment. Compensation The hourly rate for the position is $47.84 per hour. (Hourly rate set by CBA/SCA). Benefits Amentum offers the following benefits for this position, subject to applicable eligibility requirements: medical, dental and vision insurance, 401(k) retirement plan, life insurance, long term and short term disability insurance, 10 days of paid time off, 10 days paid sick and safe time. This position includes a competitive benefits package. For more detailed information on our Benefits and what it is like to work for Amentum: Please visit our career site: *********************** Compensation Details: 47.84 The compensation range or hourly rate listed for this position is provided as a good-faith estimate of what the company intends to offer for this role at the time this posting was issued. Actual compensation may vary based on factors such as job responsibilities, education, experience, skills, internal equity, market data, applicable collective bargaining agreements, and relevant laws. Benefits Overview: Our health and welfare benefits are designed to support you and your priorities. Offerings include: Health, dental, and vision insurance Paid time off and holidays Retirement benefits (including 401(k) matching) Educational reimbursement Parental leave Employee stock purchase plan Tax-saving options Disability and life insurance Pet insurance Note: Benefits may vary based on employment type, location, and applicable agreements. Positions governed by a Collective Bargaining Agreement (CBA), the McNamara-O'Hara Service Contract Act (SCA), or other employment contracts may include different provisions/benefits. Original Posting: 01/06/2026 - Until Filled Amentum anticipates this job requisition will remain open for at least three days, with a closing date no earlier than three days after the original posting. This timeline may change based on business needs. Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal laws and supplemental language at Labor Laws Posters.

Highway Patrol Electronic Technician 1 (250007FL) Organization: Public SafetyAgency Contact Name and Information: Kate Veeley | ********************* Unposting Date: OngoingWork Location: HP Alum Creek Facility 1583 Alum Creek Drive Columbus 43209Primary Location: United States of America-OHIO-Franklin County-Columbus Compensation: $26.25 - $31.95 per hour Schedule: Full-time Work Hours: See Work Hours BelowClassified Indicator: ClassifiedUnion: OSTA Primary Job Skill: Telecommunication SystemsTechnical Skills: Basic Documentation, Communications, Telecommunication Systems, Electrical Engineering, Electrical TradeProfessional Skills: Analyzation, Attention to Detail, Listening, Problem Solving, Written Communication Agency Overview Ohio State Highway PatrolIs an internationally accredited agency whose mission is to protect life and property, promote traffic safety and provide professional public safety services with respect, compassion, and unbiased professionalism. Job Description Ohio Department of Public Safety - Ohio State Highway PatrolReport In Location - 1583 Alum Creek Drive, Columbus 43209Work Hours: Choice of 6:00am - 2:00pm OR 7:00am - 3:00pm THIS POSTING IS FOR APPLICANTS TO APPLY TO BE PLACED IN A POOL OF CANDIDATES TO BE CONSIDERED FOR CURRENT AND FUTURE POSSIBLE OPENINGS AT THE LOCATION NOTED. Perks of Working for the Ohio Department of Public SafetyMultiple pay increases over the first years of service!Free Parking!Under the direction & guidance of higher-level Highway Patrol Electronic Technician, clean, install, repair, & maintain basic electronic & communication equipment:Install all RF mobile & portable electronic equipment, various electronic equipment, various wiring harnesses, various storage boxes, trays, consoles &/or cages into Ohio Department of Public Safety (ODPS) staff vehicles, Ohio State Highway Patrol (OSHP) vehicles, &/or vehicles for other state agencies, which may contain secured ammunition &/or firearms.Perform final inspection of all items listed above & on all electronic equipment installed in vehicles for accuracy & completeness.Test, repair, &/or refurbish electronic equipment & various wiring harnesses; Repair electronic testing equipment used for monitoring & adjusting.Monitor & correct any frequency modulations & power output according to Federal Communications Commission (FCC) rules & regulations.Log repairs performed & adjustments to equipment per FCC guidelines.Click here to see full position description Why Work for the State of OhioAt the State of Ohio, we take care of the team that cares for Ohioans. We provide a variety of quality, competitive benefits to eligible full-time and part-time employees*. For a list of all the State of Ohio Benefits, visit our Total Rewards website! Our benefits package includes: Medical Coverage Free Dental, Vision and Basic Life Insurance premiums after completion of eligibility period Paid time off, including vacation, personal, sick leave and 11 paid holidays per year Childbirth, Adoption, and Foster Care leave Education and Development Opportunities (Employee Development Funds, Public Service Loan Forgiveness, and more) Public Retirement Systems (such as OPERS, STRS, SERS, and HPRS) & Optional Deferred Compensation (Ohio Deferred Compensation) *Benefits eligibility is dependent on a number of factors. The Agency Contact listed above will be able to provide specific benefits information for this position.QualificationsOption 118 mos. exp. in installation, repair & workings of mobile communication equipment or vehicular electronics; for positions requiring travel, must possess & maintain valid driver's license per Section 4507.02 (A)(1) of Revised Code. Option 2-Or completion of 2 yr. technical program in electronics or radio communications; for positions requiring travel, must possess & maintain valid driver's license per Section 4507.02 (A)(1) of Revised Code. Option 3-Or completion of associate core program in electronic engineering; for positions requiring travel, must possess & maintain valid driver's license per Section 4507.02 (A)(1) of Revised Code. -Or equivalent of Minimum Class Qualifications for Employment noted above. Note: To meet the minimum qualifications through completion of a 2 yr. technical program, applicants must be able to verify that the technical program consisted of a minimum of 21 credit hours upon completion. Helpful Tips for Applying:1. Be detailed when describing your current/previous work duties. The more the better!! Don't just write "see attached resume".2. Tailor your application for each position you apply for. You should clearly describe how you meet the minimum qualifications outlined in this job posting.3. Respond to all questions asked. If you do not have the education/training/experience that is being asked, select either "No" or "N/A". Job Skills: Telecommunication Systems Supplemental InformationUNUSUAL WORKING CONDITIONS: Exposed to high voltages, inclement weather, dust, dirt, fumes, loud & constant noise; exposed to mosquitoes, rodents, wasps & poisonous snakes at remote tower sites; installations & repairs require working in confined spaces such as under vehicle dashboards & in vehicle trunks; on call 24 hrs; 7 days per week.This position is essential, meaning the duties this job performs are critical to the continued operations of the Ohio Department of Public Safety during a public safety emergency (OAC 123: 1-46-01 & DAS Directive HR-D-11). This position will be required to report for duty during any public safety emergency. Background Check Information A BCI and FBI fingerprint check, a background check, including a polygraph examination, may be required on all selected applicants.A comparative analysis and/or drug-test may be a requirement of the hiring process.This position is subject to Federal Alcohol Tobacco and Firearms (ATF) regulations that prohibit someone to carry, transport, or otherwise possess firearm(s) and/or ammunition from consuming marijuana, including medical marijuana. Medical marijuana is prohibited as a valid medical explanation for a positive drug test for final applicants in this position.To request a disability accommodation, please email ************************* as soon as possible, or at least 48 hours prior to the above referenced testing or interview date so any necessary arrangements may be made in a timely manner. ADA StatementOhio is a Disability Inclusion State and strives to be a model employer of individuals with disabilities. The State of Ohio is committed to providing access and inclusion and reasonable accommodation in its services, activities, programs and employment opportunities in accordance with the Americans with Disabilities Act (ADA) and other applicable laws.Drug-Free WorkplaceThe State of Ohio is a drug-free workplace which prohibits the use of marijuana (recreational marijuana/non-medical cannabis). Please note, this position may be subject to additional restrictions pursuant to the State of Ohio Drug-Free Workplace Policy (HR-39), and as outlined in the posting.

Sweve Tech Limited is seeking a motivated Electronics Technician who can work effectively in a remote capacity, while also traveling to company location, client sites, and vendor facilities as needed. This role is critical in providing installation assistance, troubleshooting, maintenance support, and calibration services. The ideal candidate will be hands-on, eager to learn, and committed to delivering high-quality technical services. Key Responsibilities: 1. Installation Assistance: - Support the installation of electronic systems and equipment at, office, clients and vendors locations. - Assist senior engineers during setup and commissioning of Sweve Tech systems. 2. Troubleshooting and Maintenance Support: - Diagnose and resolve issues with electronic equipment both remotely and onsite. - Provide timely maintenance support to minimize downtime and optimize equipment performance. - Respond to customer inquiries for technical assistance, offering clear and accurate solutions. 3. Calibration Services: - Perform calibration of electronic systems and devices to ensure accuracy and reliability. - Maintain records of all calibration activities, ensuring compliance with industry standards. 4. Documentation: - Create and update service reports, technical manuals, and maintenance logs. - Document all troubleshooting steps and solutions for future reference. - Maintain accurate records of all service and installation activities. 5. Travel and Remote Work: - Work remotely with occasional travel to client sites, vendor facilities, and company locations as needed. - Coordinate with the technical team to schedule service visits and ensure timely completion of tasks. Qualifications: - Education: - High school diploma or equivalent required. - An associate degree or technical certification in electronics, instrumentation, or a related field is a plus. - Experience: - Previous experience in electronics, such as internships, vocational training, or hands-on work, is preferred but not required. - On-the-job training will be provided to candidates willing to learn and grow in the field. - Technical Skills: - Basic understanding of electronic systems, circuitry, and troubleshooting techniques. - Familiarity with calibration procedures and maintenance practices is a plus. - Soft Skills: - Strong communication skills, with the ability to explain technical concepts clearly. - Detail-oriented with excellent organizational skills. - Ability to work independently and manage time effectively in a remote setting. - Other Requirements: - Flexibility to travel as needed, including potential overnight stays. - Valid drivers license and reliable transportation for site visits. What We Offer: - Competitive salary with opportunities for career advancement. - Comprehensive training and development programs. - Flexible remote work arrangements with travel allowances. - A supportive team culture focused on innovation and customer satisfaction. Join Sweve Tech Limited as an Electronics Technician and be part of a forward-thinking company that values skill development and teamwork. This role is perfect for those looking to build a career in electronics while enjoying the flexibility of remote and on-site work. Apply today to take the next step in your technical career! Job Type: Full-time Pay: $33.00 - $39.00 per hour Schedule: Monday to Friday About Us Sweve Tech Limited is a leading engineering and consulting company specializing in electrical, electronics, Civil, Mechanical Engineering, Project Management, renewable Energy solutions and Urban Planning. We deliver top-tier solutions for installations, troubleshooting, and maintenance across multiple regions. We prioritize innovation, quality, and efficiency, fostering a collaborative environment where our team can thrive. Benefits of Working as an Electronics Technician - Competitive salary - Flexible remote work options - Comprehensive training and career development - Health insurance and wellness programs - Paid time off and holidays - Retirement savings with company match - Travel opportunities (domestic and international) - Career growth with promotion from within - Supportive and collaborative work culture Join Sweve Tech Limited to advance your career while enjoying industry-leading benefits and growth opportunities.

**About M.C. Dean** M.C. Dean is Building Intelligence. We design, build, operate, and maintain cyber-physical solutions for the nation's most mission-critical facilities, secure environments, complex infrastructure, and global enterprises. With over 7,000 employees, our capabilities span electrical, electronic security, telecommunications, life safety, automation and controls, audiovisual, and IT systems. Headquarters in Tysons, Virginia, M.C. Dean delivers resilient, secure, and innovative power and technology solutions through engineering expertise and smart systems integration. **Why Join Us?** Our people are passionate about engineering innovation that improves lives and drives impactful change. Guided by our core values-agility, expertise, and trust-we foster a collaborative and forward-thinking work environment. At M.C. Dean, we are committed to building the next generation of technical leaders in electrical, engineering, and cybersecurity industries. Responsibilities Executes various technical tasks and responsibilities within field operations. Performs on-site installations, maintenance, troubleshooting, and repairs of equipment and systems. Ensures the functionality and reliability of various technologies. Key duties include conducting site surveys, configuring hardware and software, testing systems for proper operation, and providing technical support to customers. Field Technicians must possess strong problem-solving skills, technical proficiency, and the ability to communicate effectively with clients and team members. + Utilizes and comprehends project Safety plan (JHA, AHA, PFW), enforcing M.C. Dean handbook and policies. + Participates in quality reviews of M.C. Dean design documentation, analyzing and interpreting drawing packages to evaluate constructability. + Tracks project metrics and participates in weekly resource allocation meetings. + Verifies correct charges in timesheets on projects. + Executes installation and maintenance activities within planned durations, ensuring completion of detailed documentation. + Tracks and inventories tools, conducts tool inspections, and organizes material ordering and receiving. + Conducts daily ORM meetings, ensures team compliance with safety requirements, and completes accident/incident reporting. + Participates in PITCO plan creation and build out, executing PITCO plan to ensure high-quality testing and installation. + Installs system raceway, cabling, equipment racks, enclosures, and panels, adhering to industry standards. · Terminates, tests, and configures electronic devices, network and IT equipment. + Manages base switch configurations, participates in configuration of servers and workstations, and troubleshoots programmable components. + Ensures compliance with established QC plans and checklists, conducting quality control inspections and documenting findings. + Installs and maintains field devices, terminates and tests system components, and troubleshoots copper and fiber optic issues. · Leads commissioning efforts, tracks commissioning activities, and assists in representing M.C. Dean in meetings with owners and design teams. + Communicates consistently with MC Dean Project Teams, other trades, and customers, demonstrating dedication and collaboration. + Leads by example, provides constructive feedback, mentors crew members, and encourages strategic thinking and innovation. + Demonstrates strong communication, interpersonal, and time management skills, aligning with M.C. Dean's vision, mission, and values. + Provides look ahead for assignment of manpower, material procurement/staging and resource planning. · This is not intended to be an all-inclusive list of job duties and responsibilities. Other duties, responsibilities, and activities may change or be assigned at any time with or without notice. Qualifications **Education:** + HS diploma or GED Military Electronics Training (minimum 720 classroom hours) or + Graduation from an accredited Electronics Technician program or + Graduation from an Electrical Apprenticeship program + An additional three (3) years of electronics installation and/or maintenance activities **Required Progressive Experience:** + 6+ years of electronics installation and/or maintenance activities on multiple systems and with multiple customer programs + Strong Oral, Written and Presentation Skills. + Demonstrated background working with multidisciplinary teams. + Demonstrated time management and organization skills to meet deadlines and quality objectives. + Strong MS Excel, Word and PowerPoint Skills is a plus. + Requires a Valid driver's license. This position may require ongoing or intermittent use of a company vehicle. + Selected candidates must possess an acceptable driving record in accordance to our policy **Preferred Qualifications:** + Vendor certifications in multiple IDS, ACS, and CCTV systems CCURE, Lenel, Identiv/Hirsch Velocity, Bosch Radionics, Bosch CCTV, Bosch BVMS, AIphone Intercom Systems Airphone, FFT, DIVAR, Windows operating systems & certifications and experience in installation of said systems. + 3 years experience focused in electronic security systems + OSHA 30 certification **What we offer:** + A collaborative team inspired by the way engineering and innovation enhance customer outcomes, improve lives, and change the world for the better. We are driven by our core values of agility, expertise, and trust. + An opportunity to lead and build a business with the support of an industry-leading firm that has been in business for 75 years. + Investment in your skills and expertise through a combination of professional and technical training programs, including leadership training and tuition reimbursement. + Open and transparent communication with senior leadership as well as local office management. **Abilities:** + The position requires the ability to lift, carry, and move objects weighing up to [50 pounds] on a regular basis. Candidates must demonstrate physical strength and stamina to perform various tasks, including but not limited to, loading, and unloading, operating equipment, and assisting in the transportation of various materials. Proper lifting techniques and safety protocols must be followed to ensure personal and team safety. + Relocates a 12 foot stepladder without assistance. + Works at various heights up to 60 feet and can climb and maintain balance on scaffolds, aerial lifts, catwalks and all types of ladders. + Walks, climbs, lifts, squats, crawls, kneels, pushes, pulls and reaches overhead on a routine and repetitive basis. + Possess good vision (may be corrected vision), the ability to see in color, and the ability to hear and communicate in English. + May use a standard ladder without exceeding the weight limit while carrying tools. + Tell when something is wrong or is likely to go wrong. It does not involve solving the problem, only recognizing there is a problem. + Apply general rules to specific problems to produce answers that make sense. + Combine pieces of information to form general rules or conclusions (including finding a relationship among seemingly unrelated events). + See details at close range (within a few feet of the observer). + Listen to and understand information and ideas presented through spoken words and sentences.

The Electronics Technician performs basic diagnosis repairs and modifications to electronics systems. Performs the required periodic maintenance, troubleshooting, repairs, installations, and testing of equipment as required. Assist other Technicians in the setup, maintenance, and storage of airfield systems and deep-field camp systems that support aviation operations and weather observing. This position deploys to McMurdo Station, Antarctica to conduct work locally. The United States Antarctica Program requires all personnel deploying to Antarctica to pass a physical qualification. **Bonus Opportunity** CNI is committed to recognizing and rewarding our employees' hard work. As an incentive, team members who complete the deployment phase of their assignments and are in good standing may be eligible (*or qualify) for a performance-based bonus. This bonus reflects our appreciation for our employees' dedication, expertise, and contribution to successfully completing the deployment. Chickasaw Nation Industries, Inc. serves as a holding company with multiple subsidiaries engaged in several lines of business (Technology, Infrastructure & Engineering, Health, Manufacturing, Public Safety, Consulting, and Transportation) for the federal government and commercial enterprises. A portion of our profits is used to support Chickasaw citizens. We are proud to support the economic development and long-term viability of the Chickasaw Nation and its people. CNI offers premium benefits eligible on the first day of hire to full time employees; (Medical - Dental - Vision), Company Life Insurance, Short-Term and Long-Term Disability Insurance, 401(K) Immediate Vesting, Professional Development Assistance, Legal Aid Assistance Program, Family Planning / Fertility Assistance, Personal Time Off, and Observance of Federal Holidays. As a federal contractor, CNI is a drug-free workplace and adheres to the Federal Controlled Substance Act. ESSENTIAL REQUIREMENTS Must be able to obtain a T1 Clearance through the government customer. Must pass internal background checks. A valid passport is required and is reimbursable. Must have a valid driver's license. Must be able to perform job duties in extreme, cold, dark, work environments. Must pass medical and dental examination prior to deployment; expenses are reimbursable. Knowledge and experience performing electronics repair, maintenance, and checkout. Ability to follow directions and work independently or with a team. Ability to be reliable in attendance/punctuality. Ability to practice and promote required safety standards. Working knowledge of Microsoft Office Suite. Ability to persuade others to accept recommendations and to negotiate to find mutually acceptable solutions. Ability to organize work, set priorities, and determine resource requirements. Organization, problem-solving, resolution and critical thinking skills. Customer service and relationship-building skills. Excellent verbal and written communications skills. KEY DUTIES AND RESPONSIBILITIES Essential Duties and responsibilities include the following. Other duties may be assigned. Monitors and reports on system readiness, capabilities, limitations, and reliability. Document and archive maintenance actions. Ensures work center safety and equipment verification; maintain tool inventory and CPR certification. Submits repair requests, maintain equipment logs and certifications, and manage spare parts inventory. Calibrates and repairs sensors, test equipment, and support NAVAIDS, communications, and meteorology systems. Adheres to configuration, security, and frequency management policies and procedures. Provides 24/7 maintenance support, prepare reports on incidents, system outages, and operational availability. Setup, maintain, and repair of all NAVAIDS and communications systems; ensure proper equipment installation and compliance with frequency management. Setup, maintain, and repair of all meteorology systems, and perform maintenance at remote locations. Attends safety training, maintains a safe work area, and engages in self-development through available training. EDUCATION AND EXPERIENCE Laborer: High School Diploma or GED. Performs tasks that require mainly physical abilities and effort involving little or no specialized skill. The following tasks are typical of this occupation: Loads and unloads trucks, and other conveyances; moves supplies and materials to proper location by wheelbarrows or hand trucks; stacks materials for storage or binning; collects refuse and salvable materials. Digs, fills, and tamps earth excavations; levels ground using pick, shovel, tamper and rake; shovels concrete and snow; cleans culverts and ditches; cuts trees and brush. Must be able to move and arrange heavy pieces of electronic equipment, office furniture, and appliances; pull outdoor cable; climb structures; use heavy-duty tools; and if properly trained, operate light machinery and equipment. Electronics Technician Maintenance I: High School diploma or GED and Formal electronics training from a Technical School, or Class A or B military school in electronics or communications, or two (2) year electronics apprentice program. Formal electronics training, to include: Installation Tasks, Soldering, Cable Dressing, Cable Tray, Conduit, and Making/Repairing Connectors. Two (2) years of practical experience, to include: electronics repair, maintenance and checkout. Must demonstrate at least one (1) year of practical experience in electronics installation. Experience may be achieved simultaneously. Electronics Technician Maintenance II: High School diploma or GED and Formal electronics training from a Technical School, or Class A or B military school in electronics or communications, or four (4) year electronics apprentice program. Formal electronics training, to include: Installation Tasks, Soldering, Cable Dressing, Cable Tray, Conduit, and Making/Repairing Connectors. Four (4) years of practical experience, to include: electronics repair, maintenance and checkout. Must demonstrate at least one (1) year of practical experience in electronics installation. Experience may be achieved simultaneously. Electronics Technician III Maintenance: High School diploma or GED and Formal electronics training from a Technical School, or Class A or B military school in electronics or communications, or four (4) year electronics apprentice program. Formal electronics training, to include: Installation Tasks, Soldering, Cable Dressing, Cable Tray, Conduit, and Making/Repairing Connectors. Eight (8) years of practical experience, to include: Electronics Repair, Maintenance, Installation and Checkout. Two (2) years of experience, to include: supervision, and shop practices. Three (3) years of practical experience, to include: electronics repair and installation. Experience may be achieved simultaneously. PHYSICAL DEMANDS The physical ability to stand and or walk frequently. May climb on a ladder or scaffolding to heights in excess of 10'. Bend/stoop, push/pull and work above the shoulder frequently. Occasionally balance, kneel, crouch, and squat. May occasionally lift and/or move up to 65lbs. Specific vision abilities required by this job include close vision, distance vision, depth perception, and ability to adjust focus. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of this job. EOE including Disability/Vet The estimated pay range for this role is $24 to $36 per hour, with the final offer contingent on location, skillset, and experience. CNI offers a comprehensive benefits package that includes: Medical Dental Vision 401(k) Family Planning/Fertility Assistance STD/LTD/Basic Life/AD&D Legal-Aid Program Employee Assistance Program (EAP) Paid Time Off (PTO) - (11) Federal Holidays Training and Development Opportunities Your application submission will be considered for all potential employment opportunities with Chickasaw Nation Industries (CNI). #INDCNI

Responsibilities & Qualifications RESPONSIBILITIES 2+ years of practical experience required, focused in Electronics Repair, Maintenance, Installation and Checkout. Other experience required in supervision, and shop practices, electronics repair and installation, and Information Technology installation projects. Ability to be qualified and trained to work on the Lenel “On Guard” ESS system, CCTV's and Morse Watchman Keypro systems. Contractor personnel performing work on the Lenel “On Guard” ESS shall be certified by Lenel as a Lenel Certified Professional (LCP) in Access Control and Video Trained by staff in how to use software and hardware. (Lenel, AMAG, Honeywell, IQ MultiAccess, Bosch, LG, DAQ Electronics, DEA System SPA, Hirsch Electronics, Valerus, Pelco, IDIS, Panasonic, Axis Communication, GFMS, KeyTrak Guardian, Morse Watchman, Stanley Security Solutions Keystone, and Matrix Key Control) REQUIRED QUALIFICATIONS Experience: Two years of overall professional experience in the Information Technology field. Two years of overall experience in Microsoft Windows client and server operating systems. Two years of experience with electronic security systems, specifically hands-on experience in installing, configuring, maintaining, and resolving issues with the DLA ESS or EKC system. Certifications: Lenel Certified Professional (LCP) - Ability to Obtain after Start Milestone Certification - Obtained by Start Education: HIgh School Diploma or GED Clearance: Must possess a Secret security clearance PREFERRED QUALIFICATIONS Certifications: DoD Approved 8570 Baseline Certification: Category IAT Level II Overview We are seeking a Electronics Technician to join our team supporting DLA Integrated Electronic Security Systems (IESS) and Electronic Key Control (EKC). TekSynap is a fast-growing high-tech company that understands both the pace of technology today and the need to have a comprehensive well planned information management environment. “Technology moving at the speed of thought” embodies these principles - the need to nimbly utilize the best that information technology offers to meet the business needs of our Federal Government customers. We offer our full-time employees a competitive benefits package to include health, dental, vision, 401K, life insurance, short-term and long-term disability plans, vacation time and holidays. Visit us at ***************** Apply now to explore jobs with us! The safety and health of our employees is of the utmost importance. Employees are required to comply with any vaccination requirements mandated by contract, applicable law or regulation. By applying to a role at TekSynap you are providing consent to receive text messages regarding your interview and employment status. If at any time you would like to opt out of text messaging, respond "STOP". As part of the application process, you agree that TekSynap Corporation may retain and use your name, e-mail, and contact information for purposes related to employment consideration. Additional Job Information WORK ENVIRONMENT AND PHYSICAL DEMANDS The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of the job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Location: Columbus, OH Type of environment: On Site Noise level: Medium Work schedule: Schedule is day shift Monday - Friday. May be requested to work evenings and weekends to meet program and contract needs. Amount of Travel: Less than 10% PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to use hands to handle, feel, touch; reach with hands and arms; talk and hear. The employee is regularly required to stand; walk; sit; climb or balance; and stoop, kneel, crouch, or crawl. The employee is regularly required to lift up to 10 pounds. The employee is frequently required to lift up to 25 pounds; and up to 50 pounds. The vision requirements include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus. WORK AUTHORIZATION/SECURITY CLEARANCE U.S. Citizen Secret security clearance or have a current National Agency Check with Local Agency Check and Credit Check (NACLC). OTHER INFORMATION Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. TekSynap is a drug-free workplace. We reserve the right to conduct drug testing in accordance with federal, state, and local laws. All employees and candidates may be subject to drug screening if deemed necessary to ensure a safe and compliant working environment. EQUAL EMPLOYMENT OPPORTUNITY In order to provide equal employment and advancement opportunities to all individuals, employment decisions will be based on merit, qualifications, and abilities. TekSynap does not discriminate against any person because of race, color, creed, religion, sex, sexual orientation, gender identity, protected veteran status, national origin, disability, age, genetic information, or any other characteristic protected by law (referred to as “protected status”). This nondiscrimination policy extends to all terms, conditions, and privileges of employment as well as the use of all company facilities, participation in all company-sponsored activities, and all employment actions such as promotions, compensation, benefits, and termination of employment. TekSynap is committed to ensuring that our online application process provides an equal employment opportunity to all job seekers, including individuals with disabilities. If you believe you need a reasonable accommodation in order to search for a job opening or to submit an application, please contact *************** for assistance.

The ROSEN Group is a globally leading provider of cutting-edge solutions in all areas of the integrity process chain. Since its origins as a one-man business in 1981, ROSEN has rapidly grown and continues to do so. The international technology group consists of a team of more than 4,000 employees operating in more than 120 countries. ROSEN offers sophisticated and highly innovative products and services to the oil and gas and other engineering industries. ROSEN is an extended team of people with a passion for technology and innovation. Our ongoing organic growth results in career opportunities and gives our employees chances for further development and added experience. For more information about ROSEN go to ******************** ROSEN USA, based in Columbus, OH seeks to employ an Electronics Technician to test, repair, sensor test and perform basic wiring of ROSEN USA's in-line inspection tools. Responsibilities: The Electronics Technician will be responsible for the following: * Repair and test electronic components and wiring of in-line inspection tools in accordance with documented work procedures, technical instructions, drawings and parts lists. * Verification of the external sensor components of the in-line inspection tool. * Ability to identify parts and sensors that may need to be purchased or manufactured for the tool. * Work in close cooperation with Field Service Technicians regarding electronic and sensorial affairs. * Work in close cooperation with Mechanic Assembly Technician for final tool testing and assembly. REQUIREMENTS Local Houston area applicants only, relocation and/or sponsorship not available. No agency solicitations or referrals please. Physical Demands: * Must be able to lift up to 80 lbs. with the assistance of another person from a start height of 48 inches to an end height of 9 inches from the floor up to 1 time per hour. * Must be able to lift up to 29 lbs. from a start height of 9 inches to end height of 36 inches from the floor up to 1 time per hour. * Must be able to push-pull up to 35 lbs. a distance of 75 feet up to 1 time per hour. * Must be able to push-pull with a force up to 10 lbs. a distance of 300 feet up to 1 time per hour. * Must be able to push-pull with a force up to 39 lbs. a distance of 10 feet up to 1 time per hour. * Must be able to push-pull with a force up to 17 lbs. a distance of 75 feet up to 1 time per hour. * Must be able to push-pull up to 30 lbs. up to 2 times per hour. * Must be able to grasp/squeeze tools with forces up to 45 lbs. up to 20 times per hour. * Must be able to ascend/descend a flight of 18 stairs with a height of 10 inches from the floor up to 1 time per hour. * Must be able to ascend/descend a three stair step stool with a height of 10 inches from the floor up to 1 time per hour. * Must be able to stand up to 1 hour continuously for a total of up to 8 hours. * Must be able to walk a distance up to 300 feet. Qualification or Skills: * 2+ years of relevant electronic assembly experience. * Associates or Technical degree with emphasis in electronics. * Wiring, soldering and assembly experience in a manufacturing environment a plus. * Ability to use a variety of hand and power tools. * Must be able to lift 50 lbs. or more. * Must have experience interpreting and working from schematic diagrams, specification sheets and manuals. * Must comply with established Health and Safety regulations. * Excellent written and verbal communication skills and capability to communicate with all levels of the organization. * Good time management and organization skills. * A self-motivated, pro-active individual who is able to work independently as well as in a team environment. * Basic skills with Microsoft Office products such as Word and Excel. * Successfully complete a drug screen test, background check and physical performance evaluation including a vision exam as applicable to the position OUR OFFER In addition to competitive pay, you are also eligible for most of the following benefits from Day One: * Medical - 2 PPO plans & 1 High Deductible (HDHP) with a Health Savings Account (HSA) * Dental - Covered at 100% for employee & dependents * Vision - Covered at 100% for employee & dependents * 401K with a 5% matching employer contribution * Company paid basic Life Insurance, Short Term Disability / Long Term Disability * Flexible Spending Accounts * Generous Vacation Plan & Paid Time Off (PTO) * Employee Assistance Program * Access to employee resource groups * Maternity & Parental Leave * Fertility, adoption and surrogacy benefits * 32 hours paid Volunteer Time Off * Hybrid working environment for certain positions * Annual merit & career advancement increases * Leadership growth & professional development opportunities * Tuition Reimbursement

Responsibilities and Qualifications RESPONSIBILITIES 2+ years of practical experience required, focused in Electronics Repair, Maintenance, Installation and Checkout. Other experience required in supervision, and shop practices, electronics repair and installation, and Information Technology installation projects. Ability to be qualified and trained to work on the Lenel “On Guard” ESS system, CCTV's and Morse Watchman Keypro systems. Contractor personnel performing work on the Lenel “On Guard” ESS shall be certified by Lenel as a Lenel Certified Professional (LCP) in Access Control and Video Trained by staff in how to use software and hardware. (Lenel, AMAG, Honeywell, IQ MultiAccess, Bosch, LG, DAQ Electronics, DEA System SPA, Hirsch Electronics, Valerus, Pelco, IDIS, Panasonic, Axis Communication, GFMS, KeyTrak Guardian, Morse Watchman, Stanley Security Solutions Keystone, and Matrix Key Control) REQUIRED QUALIFICATIONS Experience: Two years of overall professional experience in the Information Technology field. Two years of overall experience in Microsoft Windows client and server operating systems. Two years of experience with electronic security systems, specifically hands-on experience in installing, configuring, maintaining, and resolving issues with the DLA ESS or EKC system. Certifications: Lenel Certified Professional (LCP) - Ability to Obtain after Start Milestone Certification - Obtained by Start Education: HIgh School Diploma or GED Clearance: Must possess a Secret security clearance PREFERRED QUALIFICATIONS Certifications: DoD Approved 8570 Baseline Certification: Category IAT Level II Overview We are seeking a Electronics Technician to join our team supporting DLA Integrated Electronic Security Systems (IESS) and Electronic Key Control (EKC). TekSynap is a fast-growing high-tech company that understands both the pace of technology today and the need to have a comprehensive well planned information management environment. “Technology moving at the speed of thought” embodies these principles - the need to nimbly utilize the best that information technology offers to meet the business needs of our Federal Government customers. We offer our full-time employees a competitive benefits package to include health, dental, vision, 401K, life insurance, short-term and long-term disability plans, vacation time and holidays. Visit us at ***************** Apply now to explore jobs with us! The safety and health of our employees is of the utmost importance. Employees are required to comply with any vaccination requirements mandated by contract, applicable law or regulation. By applying to a role at TekSynap you are providing consent to receive text messages regarding your interview and employment status. If at any time you would like to opt out of text messaging, respond "STOP". As part of the application process, you agree that TekSynap Corporation may retain and use your name, e-mail, and contact information for purposes related to employment consideration. Additional Job Information WORK ENVIRONMENT AND PHYSICAL DEMANDS The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of the job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Location: Columbus, OH Type of environment: On Site Noise level: Medium Work schedule: Schedule is day shift Monday - Friday. May be requested to work evenings and weekends to meet program and contract needs. Amount of Travel: Less than 10% PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to use hands to handle, feel, touch; reach with hands and arms; talk and hear. The employee is regularly required to stand; walk; sit; climb or balance; and stoop, kneel, crouch, or crawl. The employee is regularly required to lift up to 10 pounds. The employee is frequently required to lift up to 25 pounds; and up to 50 pounds. The vision requirements include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus. WORK AUTHORIZATION/SECURITY CLEARANCE U.S. Citizen Secret security clearance or have a current National Agency Check with Local Agency Check and Credit Check (NACLC). OTHER INFORMATION Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. TekSynap is a drug-free workplace. We reserve the right to conduct drug testing in accordance with federal, state, and local laws. All employees and candidates may be subject to drug screening if deemed necessary to ensure a safe and compliant working environment. EQUAL EMPLOYMENT OPPORTUNITY In order to provide equal employment and advancement opportunities to all individuals, employment decisions will be based on merit, qualifications, and abilities. TekSynap does not discriminate against any person because of race, color, creed, religion, sex, sexual orientation, gender identity, protected veteran status, national origin, disability, age, genetic information, or any other characteristic protected by law (referred to as “protected status”). This nondiscrimination policy extends to all terms, conditions, and privileges of employment as well as the use of all company facilities, participation in all company-sponsored activities, and all employment actions such as promotions, compensation, benefits, and termination of employment. TekSynap is committed to ensuring that our online application process provides an equal employment opportunity to all job seekers, including individuals with disabilities. If you believe you need a reasonable accommodation in order to search for a job opening or to submit an application, please contact *************** for assistance.

Job Title: Electronic Technician Pay Rate: $22 -$25/hour (based on experience) Schedule: Rotational shift -3 weeks on / 3 weeks off The Electronic Technician is responsible for maintaining and repairing electronic equipment to ensure on-time equipment availability in support of operational demands. This role focuses on improving maintenance efficiency, reducing nonproductive time, and supporting continuous improvement initiatives within the Maintenance Base (MB). The technician will work in alignment with Reliability Centered Maintenance (RCM) strategies and Technology Lifecycle Management (TLM) standards. Key Responsibilities Maintain assigned electronic equipment in accordance with the approved maintenance program and RCM strategy. Execute maintenance activities using the Computerized Maintenance Management System (CMMS) and follow standard work procedures. Accurately record maintenance transactions including labor, materials, parts usage, equipment movements, and work orders within TLM systems. Ensure compliance with TLM Product Line standards and the TLM Competency Management System. Support initiatives aimed at reducing equipment downtime, improving asset turnaround time, and minimizing work-in-process delays. Participate in continuous improvement efforts to enhance asset utilization, maintenance efficiency, and overall cost of service delivery (CoSD). Assist with CoSD projects, including planned repair and reuse of parts. Support productivity improvements for Maintenance Technicians through process and efficiency enhancements. Participate in failure investigations and root cause analysis as assigned. Follow all safety, quality, and operational procedures at the Maintenance Base. Required Qualifications Experience working as an Electronic Technician or in a related electronics maintenance role Strong troubleshooting and repair skills for electronic equipment Experience using CMMS or similar maintenance tracking systems Ability to work extended shifts (12+ hours) in a rotational schedule Strong attention to detail and documentation accuracy Ability to work independently and as part of a team in a remote work environment

Full-time Description National Engineering & Architectural Services, Inc. (NEAS), a full-service Geotechnical Engineering, Materials Testing, Construction Inspection, Geotechnical Drilling, and Surveying Firm is seeking individuals with construction inspection experience, particularly in the inspection of rigid and flexible pavements. As a full-time Concrete Testing Technician, you will play a key role in supporting our projects by performing a variety of tests for our clients including concrete inspection, compaction testing, and lab testing. Requirements include: High School Diploma or GED Computer proficiency Good verbal and written communication skills Ability to interpret plans, specifications, and reports Ability to perform analytical calculations Preferred Qualifications include: ACI Concrete Field Testing Certification - Grade I ODOT Prequalified Soil & Aggregate Inspector NICET Construction Material Testing - Level I NETTCP Soils & Aggregate Inspector Certification ODOT Compaction Testing Prequalification Must be able to perform a range of physical activities, including sustained walking, bending, twisting, standing and reaching, and perform medium to heavy work including occasionally lifting over 30 pounds and exerting up to 30 pounds of force. Top pay is commensurate with experience and active certifications. A company vehicle will be provided for all project related work/travel. Equal Opportunity Employer

AssetWatch serves global manufacturers by powering manufacturing uptime through the delivery of an unparalleled condition monitoring experience, with a passion to care about the assets our customers care for every day. We are a devoted and capable team that includes world-renowned engineers and distinguished business leaders united by a common goal - To build the future of predictive maintenance. As we enter the next phase of rapid growth, we are seeking people to help lead the journey. Who you are Hands on experience building, fabricating, assembling, disassembling and/or testing Comfortable using tools and working with your hands, or writing spreadsheets at your desk Comfortable with writing and using software scripts, logging data and drafting documents Highly organized and able to communicate effectively Must be self-motivated with strong initiative to deliver solutions efficiently and effectively. Able to balance between the perfect solution and just getting it done. Must be able to work well in an open team environment. Close proximity to Dublin, OH to be onsite Responsibilities Execute test procedures and experiments on new and returned product Read, follow, and maintain documentation for QC test procedures and experiment plans Disassemble, assemble and inspect returned products on a routine basis Perform failure analysis and root cause analysis. Track hardware product performance Log data and constantly improve data clarity and organization for the IoT test team Work closely with supply chain on inventory processes Work closely with Hardware and Test Engineers on new experiments and QC processes Qualifications BS or trade school certificate, equivalent or relevant hands-on work experience Experience with electronics or electrical testing equipment (oscilloscopes, multimeters, etc.) Experience with tools and measurement methods, units, tolerances Is comfortable disassembling and inspecting electromechanical devices Capable standing and performing light manual labor for many hours per shift Strong organizational skills and is detail oriented Experience with Python, Matlab and/or data acquisition software is a plus Experience with issue tracking and source control such as Jira/Bitbucket is a plus Experience in a manufacturing or consumer/industrial product test environment is a plus What We Offer: AssetWatch is a remote-first company that puts people at the center of everything we do. We want our team members to thrive - that's why we offer a range of benefits and perks designed to support your well-being, growth, and work-life balance. Competitive compensation package including stock options Flexible work schedule Comprehensive benefits including retirement plan match Opportunity to make a real impact every day Work with a dynamic and growing team Unlimited PTO We have a distributed team that works remotely across locations in the United States and Ontario, Canada. Collaboration within core working hours is required.

We are currently seeking EXPERIENCED CMT TECHNICIANS willing to travel to long-term remote projects throughout the country. Minimum requirement of ACI Concrete Certification and 6 months of experience. Valid DL, clean MVR, good background check. Traveling technicians will receive a weekly per diem amount to pay for food and living expenses during their stay in the town nearest the remote project. We are fortunate enough to work on some really cool projects, such as working on Windfarm projects to building manufacturing plants for major companies. Come work for a team that is ready to help you grow your career in Construction Materials Testing! If you enjoy working outside and collecting data that is key to the proper construction of a building or other structure, then becoming an Engineering Technician may be the perfect fit for you! This position exists for the purpose of providing testing observation on the assigned field project according to the applicable specification for independent testing laboratories. Responsibilities include, but are not limited to, sample preparation, collection & testing, field observations, and documentation of construction activities on site pertaining to soil, concrete, grout, mortar and asphalt. The position requires the incumbent to clearly identify, verbally communicate, and document test results and activities. Building & Earth offers a competitive benefits package including Medical, Dental, and Vision plans, 401(k) with company match, Flexible Spending Account, and Group Short Term Disability and Life Insurance plans. This position is paid hourly and is eligible for overtime. SCHEDULING NOTE: This position will require NIGHT shift work as well as some WEEKEND work days. Your daily schedule can change from day to day and you must be able to accommodate a flexible working schedule and have reliable transportation to and from the branch office at all hours of the day if needed. Responsibilities Management reserves the right to assign or reassign duties and responsibilities to this position at any time as needed. Reasonable temporary modifications for a period of time do not waive any essential functions of the job requirements. The position requires an incumbent to be trained to: • Receive, understand and execute written and verbal directions • Review specifications for civil and structural plans and identify sections applicable to the scope of work • Perform tests, general construction inspections and observations according to project requirements with some supervision. • Submit daily field reports to document testing, inspections and field observations • Document and communicate non-conforming items to designated project supervision • Clean, maintain and calibrate all assigned equipment according to applicable codes and standards • Transport, operate and care for a nuclear density gauge as assigned, meeting all safety, care and maintenance guidelines as outlined in the Radiation Safety Program Policy. • Understanding of Proctor Compaction Test and USCS Soil Classification. • Trained & demonstrated competency in One-Point Proctor testing in the field. Must be validated. Qualifications Required Knowledge, Skills and Abilities (Competencies) • Fundamental knowledge of sample preparation, collection & testing, field observations, and documentation of construction activities. • Must pass relevant tests and/or achieve valid signatures. • Ability to create and maintain accurate and confidential test records and to prepare easily understandable reports for documentation. • Skilled in the use of computers and common software applications. • Ability to learn company specific software and programs. • Ability to drive a company vehicle and adhere to all company guidelines for operation and safety. • Ability to be trained and to follow directions. • Ability to communicate effectively. • Ability to build and maintain effective working relationships. • Ability to dress, speak and act professionally & appropriately. • Ability to deal with stressful situations, multiple priorities and hectic schedules calmly and courteously. • Ability to work ethically, honestly and safely at all times. • Ability to drive a company vehicle and adhere to all company guidelines for operation and safety Physical Requirements 1. Must be able to move, lift or carry objects or materials up to 50 lbs. without assistance. 2. Ability to climb ladders and scaffolding 3. Ability to physically maneuver construction sites and excavations 4. Visual/hearing ability sufficient to comprehend written/verbal communications in the English language, including the ability to communicate directly and over the telephone and be understood. Minimum Education, Training, Certifications and/or Experience • High School diploma or equivalent • Minimum 6 months Experience • ACI Concrete Field Testing Technician Level I Certification • Portable Nuclear Gauge Safety Training Certification • Understanding of Proctor Compaction Test and USCS Soil Classification • Trained & demonstrated competency in One-Point Proctor testing in the field. Position Type/Expected Hours of Work This position is generally full time, with a normal work schedule of 7AM to 5PM, Monday through Friday. Hours will regularly be adjusted to meet construction schedules of clients and may include weekend rotations, night work, and early morning work. Travel Daily travel to and from construction work sites, generally within 100 miles from the home office, is expected. Short term, out-of-town work, generally lasting less than 2 weeks, is probable. Long term, outof-town assignments may be required occasionally with advance notice of planned dates. Special Requirements 1. Possession of a valid state of residence driver's license. 2. Ability to be insured under all applicable Corporation insurance policies and requirements. Other Duties Please note: this job description is not designed to cover or contain a comprehensive listing of all reasonable activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice.

Job Description AssetWatch serves global manufacturers by powering manufacturing uptime through the delivery of an unparalleled condition monitoring experience, with a passion to care about the assets our customers care for every day. We are a devoted and capable team that includes world-renowned engineers and distinguished business leaders united by a common goal - To build the future of predictive maintenance. As we enter the next phase of rapid growth, we are seeking people to help lead the journey. Who you are Hands on experience building, fabricating, assembling, disassembling and/or testing Comfortable using tools and working with your hands, or writing spreadsheets at your desk Comfortable with writing and using software scripts, logging data and drafting documents Highly organized and able to communicate effectively Must be self-motivated with strong initiative to deliver solutions efficiently and effectively. Able to balance between the perfect solution and just getting it done. Must be able to work well in an open team environment. Close proximity to Dublin, OH to be onsite Responsibilities Execute test procedures and experiments on new and returned product Read, follow, and maintain documentation for QC test procedures and experiment plans Disassemble, assemble and inspect returned products on a routine basis Perform failure analysis and root cause analysis. Track hardware product performance Log data and constantly improve data clarity and organization for the IoT test team Work closely with supply chain on inventory processes Work closely with Hardware and Test Engineers on new experiments and QC processes Qualifications BS or trade school certificate, equivalent or relevant hands-on work experience Experience with electronics or electrical testing equipment (oscilloscopes, multimeters, etc.) Experience with tools and measurement methods, units, tolerances Is comfortable disassembling and inspecting electromechanical devices Capable standing and performing light manual labor for many hours per shift Strong organizational skills and is detail oriented Experience with Python, Matlab and/or data acquisition software is a plus Experience with issue tracking and source control such as Jira/Bitbucket is a plus Experience in a manufacturing or consumer/industrial product test environment is a plus What We Offer: AssetWatch is a remote-first company that puts people at the center of everything we do. We want our team members to thrive - that's why we offer a range of benefits and perks designed to support your well-being, growth, and work-life balance. Competitive compensation package including stock options Flexible work schedule Comprehensive benefits including retirement plan match Opportunity to make a real impact every day Work with a dynamic and growing team Unlimited PTO We have a distributed team that works remotely across locations in the United States and Ontario, Canada. Collaboration within core working hours is required.

Job Title: Test TechnicianJob Description The Test Technician position involves performing functional testing of UPS, Charger, and Inverter modules within a dynamic and innovative environment. The role supports the development and servicing of critical infrastructure needed for data centers, communication networks, and industrial facilities. With a focus on power, thermal, and infrastructure management solutions, this position is integral to the growing mobile and cloud computing markets. Responsibilities * Perform functional testing of UPS, Charger, and Inverter modules. * Conduct witness tests or assist Test Engineers in conducting witness tests. * Verify conformance to all specified requirements. * Perform electrical tests and systems testing on UPS units. * Design and develop instrumentation systems incorporating uncertainty analysis for accurate testing. * Collect data using electronic equipment. * Conduct physical and functional inspection of electrical components. * Operate test bays/stations and associated equipment. * Troubleshoot and repair faulty components. * Assess product evaluation against engineered standards including UL/CSA/IEEE standards. * Review order write-ups and operate components to ensure product quality. * Configure and connect system equipment such as switchgear, SCCT cabinets, and power ties. * Perform preliminary inspection and tests. Essential Skills * Bachelor's or Associate's degree in Electronics. * 2+ years of electronics experience. * Experience in electronic testing. * Knowledge of electrical circuitry. Additional Skills & Qualifications * Familiarity with PCB, Test Engineering, Electrical Circuits, analog circuitry, digital circuitry, and electrical instruments. * Understanding of electronics and test equipment. Work Environment The work environment is a clean manufacturing facility where the Test Technician will collaborate with a team of 12 engineers and technicians. The role includes a third shift from 10:30 pm to 7 am, Monday through Friday, second shift from 2:30 pm to 11:00 pm with required overtime including Saturdays, and first shift from 6 am to 2:30 pm with potential overtime on Saturdays. The position offers hands-on technical troubleshooting and training opportunities, with potential career advancement into a Test Engineering role after two years. The role involves working on high-tech equipment supporting the expanding Data Center industry. Job Type & Location This is a Contract to Hire position based out of DELAWARE, OH. Pay and Benefits The pay range for this position is $31.00 - $31.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in DELAWARE,OH. Application Deadline This position is anticipated to close on Jan 23, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options.

The Test Technician will support the engineering test activities for Vertiv's single phase UPS line of business. Acts as the local Delaware, OH Single Phase UPS lab resident by organizing equipment, setting up and performing EVT & DVT tests, and reporting findings. Will mainly support new product development and occasionally support sustaining test activities. RESPONSIBILITIES * Sets up and performs tests requested by product engineers. * Assist with assembly of prototype units * Organizes and maintains a safe, clean, productive lab space. * Performs product tear downs and technical analysis down to the PCB level. * Reports findings in an organized manner. QUALIFICATIONS * Associate degree in electrical engineering or equivalent with 3-5 years test engineering experience with electrical-based products. * Bachelor's degree in electrical engineering or equivalent with 2-3 years test engineering experience with electrical-based products. * Basic working knowledge in power/electrical engineering; AC and DC power * Ability to read and understand electrical schematics and identification of components. * Strong engineering troubleshooting skills with the ability to solve (and prevent) a wide range of problems quickly and methodically. * Ability to operate in an electrical testing lab environment safely and successfully. * Very strong planning, organizing, documentation, and communication skills. * Ability to multitask and operate in cross functional global development teams. PHYSICAL & ENVIRONMENTAL DEMANDS * Ability to lift to 50-75 lbs (23-34 kg) and team lift to 100-150 lbs (45-68 kg). TRAVEL REQUIRED * None The successful candidate will embrace Vertiv's Core Principals & Behaviors to help execute our Strategic Priorities. OUR CORE PRINCIPALS: Safety. Integrity. Respect. Teamwork. Diversity & Inclusion. OUR STRATEGIC PRIORITIES * Customer Focus * Operational Excellence * High-Performance Culture * Innovation * Financial Strength OUR BEHAVIORS * Own It * Act With Urgency * Foster a Customer-First Mindset * Think Big and Execute * Lead by Example * Drive Continuous Improvement * Learn and Seek Out Development About Vertiv Vertiv is a $8.0 billion global critical infrastructure and data center technology company. We ensure customers' vital applications run continuously by bringing together hardware, software, analytics and ongoing services. Our portfolio includes power, cooling and IT infrastructure solutions and services that extends from the cloud to the edge of the network. Headquartered in Columbus, Ohio, USA, Vertiv employs around 20,000 people and does business in more than 130 countries. Visit Vertiv.com to learn more. Work Authorization No calls or agencies please. Vertiv will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas such as E, F-1, H-1, H-2, L, B, J, or TN or who need sponsorship for work authorization now or in the future, are not eligible for hire. Equal Opportunity Employer Vertiv is an Equal Opportunity/Affirmative Action employer. We promote equal opportunities for all with respect to hiring, terms of employment, mobility, training, compensation, and occupational health, without discrimination as to age, race, color, religion, creed, sex, pregnancy status (including childbirth, breastfeeding, or related medical conditions), marital status, sexual orientation, gender identity / expression (including transgender status or sexual stereotypes), genetic information, citizenship status, national origin, protected veteran status, political affiliation, or disability. If you have a disability and are having difficulty accessing or using this website to apply for a position, you can request help by sending an email to ********************. #LI-RB1

Delaware, OH 6+ Months of Contract Must assess product evaluation against NEC and UL/CSA standards. Review order write-ups, operate components, ensure product quality, work with other areas to ensure quality, and verify units to meet agency approvals. Performs experience testing and troubleshoots power conversion equipment prior to shipment. Conducts test following specific test procedures by using measuring instruments and computer test programs Documents test results with appropriate information in a complete manner Uses measuring instruments, assorted related tools, and computer test program accurately. Work with Test and Manufacturing Engineers on test equipment development. Coordinate the development and modifications of test work instructions. Reads and interprets specific test procedures to properly perform and document test results Performs tests to measure strength, durability and maintainability as required Collects test data and prepares reports detailing results Installs, diagnoses, services and repairs electrical equipment prior to shipment of finished product. Configure and connect system equipment (switchgear, SCCT cabinets, and power ties), and perform preliminary inspection and tests. Applies knowledge and ability to use hand tools and operate test equipment according to established procedures Reads and understands wiring diagrams to trace electrical circuits and ensure proper operation according to engineered specifications. Makes repairs as needed in circuitry. Examines electrical equipment during operating cycles to detect excess vibration, overheating, fluid leaks, and loose, noisy or non-functioning parts. Repairs any problems found to be non-conforming to engineered specification Replaces defective parts Performs other “fixes”found to ensure the unit is operational at time of shipment Skills Beginning level of computer skills with knowledge of MS office products such as Word and Excel Ability to read and comprehend simple instructions, write short correspondence and effectively present information to others in English Should be knowledgable in the use of the following equipment: hypot tester, multi meters, wave and power analyzer, and oscilloscope. Must be able to read electrical and mechanical blueprints. Education: Associate's degree in electrical/mechanical engineering OR Equivalent training from two-year technical school with emphasis in electrical applications OR Combined knowledge and experience to equal two years

Benefits: Bonus based on performance Dental insurance Employee discounts Health insurance Vision insurance We have a great benefits package consisting of: Health Insurance - Affordable health insurance with the 2 plan options: PPO 2000 or HSA 3000 Dental Insurance - Affordable dental insurance with NO waiting period. Vision Insurance - Quality vision coverage for very little cost. Life Insurance - $10,000 Life Insurance Policy paid in full by the company. 401K Plan - All administrative fees are paid by the company. ESOP - Employee Stock Ownership Program Paid Time Off - Competitive paid time off policies. Employee Discount - Generous employee discount on ALL merchandise. Appliance & Electronics Technician At Big Sandy Superstore, our success is based primarily on the quality of people on our team and their commitment to delivering the Superstore Experience. We are devoted to investing in and supporting our employees and the constant improvement of our company. In fact, we strive to provide a great work environment and treat each other with respect and dignity. As an Appliance & Electronics Technician you will be responsible for diagnostics and repair of customer units. The expectations and duties of this job are as follows: Contact customer at the start of each work day. Run all calls that are scheduled for the day. Accurately diagnose Appliances & Electronics. Order parts and put comments in the work order from the customer's home. Install parts on units and test operation when finished with installation of parts. Call tech line and document call in the system after any failed repair attempt. Finalize all billing notes from the customers home. Additional tasks, both within the scope of this position and outside of it, will be assigned and are expected to be completed within the agreed upon time-frame. Qualities we are looking for: A self-starter with strong multitasking skills Can work independently or within a team environment An individual who has the financial well-being, public confidence in, and image of the Company in mind at all times. Qualifications: High School Graduate or GED Strong customer skills Strong interpersonal skills Job Type: Full-Time Regular Company reserves the right to add or delete from job description as needed. Compensation: $40,000.00 - $60,000.00 per year Independent Retail offers a myriad of opportunities for people of all backgrounds. When you think of jobs in retail, sales associates and store managers are probably the positions which come to mind. But what if we told you that 44% of people who work in retail don't work in sales? Retail offers flexible, collaborative careers in logistics, marketing, project management, finance, merchandising, purchasing, technical trades, and customer service - to name just a few. Retail companies are also some of the most exciting brands in the country - and they're driving the industry's innovations in customer experience. Retail is the #1 private-sector employer in the country If you're seeking to make an impact from the start of your career, spark impressive change, learn new or innovative skills and most importantly, gain success in a field that rewards ambitious hard workers, retail is for you! This employment opportunity is available at the organization listed at the top of this page. Your application will go directly to them and all hiring decisions will be made by their management. All inquiries should be made directly with the organization that posted this employment opportunity.

Benefits: Bonus based on performance Dental insurance Employee discounts Health insurance Vision insurance We have a great benefits package consisting of: Health Insurance - Affordable health insurance with the 2 plan options: PPO 2000 or HSA 3000 Dental Insurance - Affordable dental insurance with NO waiting period. Vision Insurance - Quality vision coverage for very little cost. Life Insurance - $10,000 Life Insurance Policy paid in full by the company. 401K Plan - All administrative fees are paid by the company. ESOP - Employee Stock Ownership Program Paid Time Off - Competitive paid time off policies. Employee Discount - Generous employee discount on ALL merchandise. Appliance & Electronics Technician At Big Sandy Superstore, our success is based primarily on the quality of people on our team and their commitment to delivering the Superstore Experience. We are devoted to investing in and supporting our employees and the constant improvement of our company. In fact, we strive to provide a great work environment and treat each other with respect and dignity. As an Appliance & Electronics Technician you will be responsible for diagnostics and repair of customer units. The expectations and duties of this job are as follows: Contact customer at the start of each work day. Run all calls that are scheduled for the day. Accurately diagnose Appliances & Electronics. Order parts and put comments in the work order from the customer's home. Install parts on units and test operation when finished with installation of parts. Call tech line and document call in the system after any failed repair attempt. Finalize all billing notes from the customers home. Additional tasks, both within the scope of this position and outside of it, will be assigned and are expected to be completed within the agreed upon time-frame. Qualities we are looking for: A self-starter with strong multitasking skills Can work independently or within a team environment An individual who has the financial well-being, public confidence in, and image of the Company in mind at all times. Qualifications: High School Graduate or GED Strong customer skills Strong interpersonal skills Job Type: Full-Time Regular Company reserves the right to add or delete from job description as needed.