Operator jobs in Griswold, CT - 552 jobs

CNC Machine Operators 3rd Shift hours are Mon-Fri 10:30p-7:00a The ideal candidate with be responsible for setting-up, operate and troubleshoot CNC machines according to scheduled orders to produce quality machined parts for the Aerospace and Automotive industries. You will also be responsible for troubleshooting issues that arise during the machining runs, completes offsets and adjustments, and assists operators as needed. Machines include lathes, mills, grinders, and manual tools (Haas, Fadal, Mori Seiki, Akuma etc.). Responsibilities Perform set-up for complex/advanced/non-routine jobs independently Use measuring equipment effectively such as micrometers and calipers Work from written procedures and work routers Dismantle jigs, tools, and special fixtures Make tooling as necessary Provides training to co-workers on the operation of CNC machines and inspection methods and tools. Maintain drawing specifications by monitoring dimensional and visual characteristics to detect non-conformances Handle raw material and hazardous waste safely and in an environmentally responsible manner Perform preventative maintenance on equipment Other duties as assigned Requirements High School Diploma or equivalent (will consider candidates with considerable experience in lieu of education requirement) 5+ years of experience in performing adjustments and offsets in CNC Machining for Mills and Lathes (Required) Effective verbal/written communications skills and organizational skills Must have a strong work ethic, attention to detail, good attendance, and flexibility to work overtime as needed The client offers a competitive salary package that is dependent on qualifications and experience, as well as a strong benefit package, plus participation in a company-wide bonus plan. For immediate consideration and faster response, please forward current resume to: ***********************. Please include job #18747 in subject line. Please note that all candidates applying must be a US Citizen or Permanent Resident. Client will NOT sponsor.

Guill Tool & Engineering West Warwick, RI. Job Position: CNC Lathe Operator - Full-Time Position. Hourly wage: Commensurate with experience. Benefits: Overtime. Health-Individual Plan n/c. Dental-Individual Plan n/c. Low-cost Vision Plan. Vacation time. Holidays. 401k Retirement Plan/Match up to 3%. On bus route. "WE ARE AN EQUAL/OPPORTUNITY AFFIRMATIVE ACTION EMPLOYER".

Adecco Staffing is working with a manufacturing plant in Boxborough, MA. We are looking for Assemblers on 1st Shift! This is a Temp-hire position. Job Details: Assemble product of assigned cells with some supervision Follow instructions on assigned manufacturing processes Attention to Detail: Assemble product with a low of defect rate All other duties as assigned Hours: 7:00AM-3:30PM Pay Rate: $18.00/hr on 1st QUALIFICATIONS: Ability to follow verbal procedures and interpret bill of material prints Use of mechanical hand tools and manufacturing equipment such as ultrasonic welders, resistance welders, tig welders and parts cleaners Drive to understand and execute processes after initial trainings Required Skills/Experience: Ability to communicate well with peers and supervisors Basic Rohs soldering skills Manual dexterity and eye hand coordination Able to stand for most of the working shift. Ability to lift 30 lbs Preferred Skills/Experience: 6 months or more of assembly experience Use of testing equipment such as leak testers and calibration equipment to verify product performance Education: High school diploma or equivalent experience Job Requirements Teamwork skills Problem solving and critical thinking skills Attention to detail A strong work ethic Ability to work overtime as needed Pay Details: $18.00 per hour Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, EAP program, commuter benefits and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable. Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: The California Fair Chance Act Los Angeles City Fair Chance Ordinance Los Angeles County Fair Chance Ordinance for Employers San Francisco Fair Chance Ordinance Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Reno Machine Company and its subsidiary TM Industries, located at 134 Commerce Street in East Berlin, CT, are looking for skilled candidates. Reno Machine Company and TM Industries are CNC-based manufacturing facilities that focus on large-format machining for aerospace, defense, power generation and research development projects. Job Summary We are seeking a skilled CNC Operator to join our dynamic manufacturing team. As a CNC VTL operator, you will be responsible for setting up, adjusting and operating a variety of large format machines per op-sheets and blueprints while maintaining quality and safety standards, keeping records and maintaining equipment. Machined parts may have multiple shapes with steps, profiles, and diameters. Most definition carries a tolerance of up to ±.001”. This position is excellent for anyone who has knowledge of mechanical principles and a positive team-oriented attitude. Responsibilities Ability to machine parts with multiple shapes, steps, profiles and tolerance Set up and operate per op-sheets and blueprints in a job shop environment Inspect the finished product for accuracy per blueprints and setup sheets Maintain your machine and troubleshoot issues Report any major issues to management or the maintenance team Follow operators' responsibilities. Perform other duties as assigned by production supervisor or general manager. Experience 2-5 years experience operating a CNC VTL or equivalent type of machine Ability to read and understand blueprints and job process routing sheets Ability to read, write and edit programs (preferred) Vocational certificate (preferred) Strong analytical abilities with excellent problem-solving skills Good math and communication skills Must be authorized to work in the U.S. Schedule: Day shift (Night Shift for Those Interested) Monday to Friday, 10 HR Shifts Overtime Weekends as needed Job Type: Full-time Benefits: 401(k) 401(k) matching Dental insurance Health insurance Life insurance Paid time off Vision insurance

At Niagara, we're looking for Team Members who want to be part of achieving our mission to provide our customers the highest quality most affordable bottled water. Consider applying here, if you want to: Work in an entrepreneurial and dynamic environment with a chance to make an impact. Develop lasting relationships with great people. Have the opportunity to build a satisfying career. We offer competitive compensation and benefits packages for our Team Members. Production OperatorThis position is responsible for daily operations of the production floor; ensuring the shift meets established safety, quality, and production goals in compliance with all applicable legal and food safety requirements. Essential Functions Responsible for daily activities of the production line(s), ensuring product adheres to Niagara's standard of safety, quality, and throughput. Accurately completes applicable quality and production reports hourly. Physical and visual inspection of product is required to prevent non-conforming goods. Correctly reports all quality defects to the appropriate team members and shift leadership. Adheres to the highest standards of company and plant safety programs, guidelines, rules, and regulations. Abides by Niagara's Good Manufacturing Practices (GMP) and Food Safety Standards at all times. Maintains general housekeeping in all areas of production and additional areas assigned by plant leadership. Maintains appropriate level of raw materials as required, to ensure production lines incur minimal downtime. Demonstrates the aptitude and skill to work in all assigned areas of production; troubleshoots minor production line issues and performs relief duties when required. Regular and predictable attendance is an essential function of the job. Ability to work 12 hour shifts, day or night, on a rotating 2-2-3 schedule or schedule as dictated by production demand. Please note this job description is not designed to contain a comprehensive list of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without prior notice. Qualifications Minimum Qualifications: 0 Years - Experience in Field or similar manufacturing environment 0 Years - Experience in Position 0 Years - Experience managing people/projects *experience may include a combination of work experience and education Preferred Qualifications: 2 Years - Experience in Field or similar manufacturing environment 2 Years - Experience in Position 2 Years - Experience managing people/projects *experience may include a combination of work experience and education Competencies This position embodies the values of Niagara's LIFE competency model, focusing on the following key drivers of success: Lead Like an Owner Makes safety the number one priority Keeps alert for safety issues and escalates immediately Effectively prioritizes tasks based on department goals Shows respect to others and confronts interpersonal issues directly Prioritizes resolution of customer issues effectively Responds promptly and honors commitments to internal and external customers InnovACT Makes recommendations to continuously improve policies, methods, procedures, and/or products Demonstrates adaptability by reacting appropriately to unexpected changes in situations or circumstances Increases performance through greater efficiency Find a Way Seeks to develop technical knowledge through learning from other experts Understands interdepartmental impact of individual decisions and actions Seeks solutions rather than placing blame Empowered to be Great Consistently looks for ways to improve one's self through growth and development opportunities Communicates clearly and promptly up, down, and across Communicates effectively to manage expectations Education Minimum Required: High School Diploma or GED Preferred: Associate's Degree Certification/License: Required: N/A Preferred: N/A Foreign Language Required: None Required Preferred: None Required Typical Compensation Range Pay Rate Type: Hourly$20.01 - $27.02 / Hourly Benefits Our Total Rewards package is thoughtfully designed to support both you and your family: Regular full-time team members are offered a comprehensive benefits package, while part-time, intern, and seasonal team members are offered a limited benefits package. Paid Time Off for holidays, sick time, and vacation time Paid parental and caregiver leaves Medical, including virtual care options Dental Vision 401(k) with company match Health Savings Account with company match Flexible Spending Accounts Expanded mental wellbeing benefits including free counseling sessions for all team members and household family members Family Building Benefits including enhanced fertility benefits for IVF and fertility preservation plus adoption, surrogacy, and Doula reimbursements Income protection including Life and AD&D, short and long-term disability, critical illness and an accident plan Special discount programs including pet plans, pre-paid legal services, identity theft, car rental, airport parking, etc. Tuition reimbursement, college savings plan and scholarship opportunities And more! *********************************************** * *Los Angeles County applicants only** Qualified applicants with arrest or conviction records will be considered for employment in accordance with the Los Angeles County Fair Chance Ordinance for Employers, the California Fair Chance Act, and any other applicable local and state laws. Any employment agency, person or entity that submits a résumé into this career site or to a hiring manager does so with the understanding that the applicant's résumé will become the property of Niagara Bottling, LLC. Niagara Bottling, LLC will have the right to hire that applicant at its discretion without any fee owed to the submitting employment agency, person or entity. Employment agencies that have fee agreements with Niagara Bottling, LLC and have been engaged on a search shall submit résumé to the designated Niagara Bottling, LLC recruiter or, upon authorization, submit résumé into this career site to be eligible for placement fees.

Job Description About Us Stellar Industries is a rapidly growing industry leader in manufacturing metalized ceramics. We are a major supplier of innovative, high-quality parts to the Aerospace, Photonics, Telecommunications, and Commercial industries. The company was acquired by TRUMPF Photonics in 2019 and has significant growth goals. About the Role The Quality Control Inspector Level II maintains quality standards by inspecting incoming materials from outside suppliers, in-process production, and finished products in accordance with the quality standards and operating procedures set forth by the Head of Quality Control/Quality Assurance. What You Get to Do Works independently with minimal supervision. Maintain an organized and clean work area. Uses Hand tools, including but not limited to tweezers, calipers, and micrometers. Confirms specifications by conducting visual and measurement tests. Works with a variety of blueprints and technical drawings; must be able to interpret changing requirements as products and builds vary. Completes a General Inspection Report by documenting inspection findings regarding product dimensions, quantity of parts accepted/rejected, and basis of rejection. Uses Vision Systems and documents results into the computer. Follow all safety protocols. Cross-train as requested in other areas of the company. About You Minimum of 3 years of quality control experience. Must be able to work in a sitting position for up to 10 hours. Must be able to wear a lab coat, spittle mask, and gloves while working. The position requires working with measuring devices and microscopes. Individuals must have previous experience working in a similar environment. Must be able to work independently and demonstrate extremely high levels of precision and accuracy. line, High-Temperature BTU Furnaces, as well as various facility-related items, including air handlers, air compressors, air filtration units, etc. What We Offer Competitive pay A generous benefits package that includes medical, dental, 401K plan, and PTO Employer-paid vision plan, Employer paid Basic Life and AD&D Insurance, and Employer Paid Disability Insurance Tuition Reimbursement 4-Day workweek, Monday-Thursday 12 pm-10:30 pm Monday-Thursday 12:00 pm - 10:30 pm

Are you looking for your next opportunity within a manufacturing role? Our Shell team at Groton are looking for new team members to help us continue to turn metals into motion! At Doncasters we have an exciting opportunity for 3 Shell Robot Operators to join our team in Groton, Connecticut! Hours - 40 hours a week, we are looking for 3 new people to join our expanding team across multiple shifts! Shifts: 1 st Shift - Monday - Thursday, 6:00 AM - 4:30 PM Development - Doncasters prides itself on investing in their employees. You will receive extensive on the job training while working within an experienced team, receiving continuous feedback to help you grow and develop to ensure you maximize your potential. Salary - Our trainee hourly rates start at $20.61. With our on-the-job training program and Doncasters dedication to your development, you're set to fast track your pay increase in as little as 2-3 months. Already have relevant experience, The starting pay is based on experience. Why join us? Did you know that every time you take a flight, drive somewhere or every time you have electricity at the touch of a button, there's a chance that Doncaster's played a part in making that happen? Doncasters is a leading international manufacturer of specialist superalloys and high - precision alloy components made for the most demanding conditions with manufacturing facilities in Europe, USA Mexico, China, and India. Doncasters Precision Castings of Groton is an industry leader in the development and production of Precision cast components. Some of the products produced at Groton include Nickel and cobalt based superalloy parts, engine structural components, castings - fans, compressors, and combustors and many more that keep the world in motion! Groton is one of our largest sites, based in Connecticut, employing 210 employees, and is still growing, Groton is situated in a great location for easy commuting. What we can offer you: - An interesting and varied field to work in. - An environment where you can learn and grow through constant development opportunities. - PTO - Competitive 401K - Competitive medical insurance The Role Join our team as a Shell Robot Operator and look forward to receiving training to play a crucial role in ensuring parts are perfectly prepared and customer specifications are met with precision and efficiency! As a Shell Robot Operator, you will be responsible for operating robotic systems used in applying ceramic coatings to wax patterns. This role is essential in ensuring parts meet critical customer specifications. You'll be trained in all aspects of the process, with opportunities to grow and cross-train within the Shell Room. As a Shell Robot Operator, you will: - Operate Robotic Shell equipment following documented SOPs (Standard Operating Procedures) - Prepare Molds and Wax assemblies for coating - Inspect parts during and after shelling for quality and adherence to customer specification - Mix and replenish slurry tanks according to specifications Please be aware that safety is one of our number one priority, all our roles require the proper usage of PPE (Person Protection Equipment). Join us and be part of an innovative team where precision meets performance! Interested? If you had any of the skills below, we would love to talk to you about your next career move: This role requires no previous experience while any experience within a manufacturing environment is advantageous, we are looking for people who are willing and eager to learn on the job and work in our new shell room with new equipment! You will also enjoy working in a team and enjoy learning other areas within the shell room to develop and grow yourself. The successful candidate will work from documented instruction and technique cards to ensure customer specifications are achieved so will need to have attention to detail skills and the ability to read and interpret work instructions. Doncasters Values: We foster a winning mindset that enables everyone to be both safe and able to fulfil their potential. We strive for excellence, commitment, integrity and teamwork in the pursuit of our goals. To Apply: Apply online. We'll be in touch with you quickly after receiving your application. Equal opportunities Doncasters is committed to achieving workforce diversity and we pride ourselves on creating an inclusive working environment. We welcome all applications irrespective of social and cultural background, national origin, race, age, sex, gender identity, disability- physical or hidden, sexual orientation, veteran status, religious belief, or any other characteristics protected by law. We provide a fully inclusive and accessible recruitment process. We encourage all applicants to reach out if they require any support or accommodation to enable them to thrive throughout our recruitment process. Please contact **********************.

Who We Are At NPL, part of The Centuri Organization, our employees are part of an established team working to support America's natural gas utility and energy infrastructure. Working at NPL means you are joining a company with over 50 years of experience, long-standing customer relationships, and one that is deeply integrated into our host communities. Come grow your career with us and be a part of something bigger. As an experienced Equipment Operator, after paid training, you will put your skills to work - safety operating equipment to move earth, tools and materials to and from job sites. Reporting to a seasoned Foreman, you will join a crew to get the job done right. We believe in the power of teamwork, and all crew members are expected to assist with general labor as needed. What You'll Do * Safely operate heavy equipment such as: skid steers, backhoe, trencher, paver, dozer, milling saw, road grater, hydro-excavator, track hoe and more * Load and unload equipment and materials * Maintain daily pre-shift vehicle and equipment inspections * Perform regular maintenance and cleaning on assigned vehicles and equipment * Maintain all industry-required Operator Qualifications: EWN and/ or NGA * Perform other tasks as requested by leadership What You'll Have * High School diploma or equivalent * Valid Driver's License * 1+ year experience safely operating equipment in close proximity to workers and underground utilities * Operator Qualifications: EWN and/or NGA What You'll Get * Join the Largest Natural Gas Distribution Contractor in the United States * Weekly Payroll * Paid, on-the-job training: natural gas distribution, utility excavation, safety * Employee Assistance program benefit * Health Insurance Plan benefit * Retirement Plan benefit Work Environment * Work sites are outdoors in potentially extreme weather conditions * All worksite safety instructions are written and spoken in English; must be fluent in English * Work includes prolonged and repeated: lifting (including overhead, up to 50lbs); standing; climbing; kneeling; reaching and feeling; crouching and crawling * Work is performed within the "red zone" of heavy equipment * Working safely requires quick/accurate hand-eye coordination and the ability to work in a constant state of alertness and safe manner Legal Stuff * Pass pre-employment, random, post-accident, and reasonable suspicion drug screens * Provide valid US work authorization documents for E-Verify * Satisfactory results of pre-employment background check results * Valid driver's license with clean driving record * Pre-employment medical fit-for-duty test; hold/obtain DOT medical card * Join and maintain Union membership Diversity, Equity & Inclusion Commitment This job description is subject to change at any time. It reflects management's assignment of essential functions, and does not exclude or restrict the tasks that may be assigned. Centuri and its subsidiary companies will provide equal employment opportunities to all applicants without regard to an applicant's race, color, religion, sex, gender, genetic information, national origin, age, veteran status, disability, or any other status protected by federal, state or local law. Centuri will provide reasonable accommodations to allow an applicant to participate in the hiring process (e.g., accommodations for a test or job interview) if so requested. Centuri is a Department of Transportation regulated employer. Certain safety-sensitive positions are covered under the DOT Drug and Alcohol Testing Regulations, 49 CFR Part 40. It is important to note that marijuana remains a drug listed in Schedule I of the Controlled Substances Act. It remains unacceptable for any safety-sensitive employee subject to drug testing under the company's Drug Free Workplace Policy to use or test positive for marijuana. Nearest Major Market: Springfield MA

Work With The Best We are building the premier outdoor living company in the country by creating a “family of family companies” across the nation. Now you can build your landscaping career with the best, working in one of our many company locations nationwide. Learn from the top experts in the field and work on some of the country's largest and most complex landscape projects. Take advantage of opportunities to share and exchange best practices across our network. The opportunities are endless. HEAVY SNOW EQUIPMENT OPERATORS WANTED Ÿ LOADER OPERATORS Ÿ SKID STEER OPERATORS MetroWest: Foxborough, Medway, Westborough, Waltham, and Burlington Winter will be here before you know it! We are currently seeking reliable snow Loader Operators & Skid Steer Operators to join our team for the 2025-2026 snow season. RP Marzilli has been exceeding our clients' expectations for 40 years. Join our winning team! : Load Operator & Skid Steer Operator Pay & Perks: $25.00 - $45.00 an hour - Depending on Experience & Equipment Qualifications QUICK PAY! Great way to make extra pay around the holidays! Temp Work may lead to full-time position Spring 2026! Duties and Requirements: Heavy equipment operation: Safely and proficiently operate a front-end loader and other heavy equipment to remove snow and ice. May use mechanized snow removal equipment, utilizing snowplows, loaders and skid steers. Site clearing: Clear snow from designated areas such as parking lots, access roads, and loading docks according to specified site maps or supervisor instructions. Snow management: Load snow into dump trucks or strategically move and stockpile snow to minimize impact on traffic flow and site accessibility. Vehicle maintenance: Perform and document daily pre- and post-trip inspections of the loader. Conduct routine checks on fluid levels, tire pressure, and lights, and report any mechanical issues to the maintenance team. Safety protocols: Maintain a safe work environment by following all company safety policies and procedures. Be aware of blind spots and surroundings to prevent accidents. Communication and reporting: Maintain clear and regular communication with a supervisor or dispatcher. Fill out daily work logs detailing equipment hours, work completed, and materials used. Substantial physical activity required. Must be able to lift 50lbs. Operators must possess a valid Driver's License and equipment-appropriate MA Hoisting License (2C, 2D) Operators must provide own transportation. R.P. Marzilli provides tools and new equipment! Hours may vary due to snowfall, daylight, and adverse weather conditions. Operators must provide cold weather clothing, jackets, snow pants, winter boots, hat, gloves. Must be available on call, over the weekend on various times of the day/night Pay Transparency Mariani Enterprises LLC is committed to pay transparency and equity among all employees and provides employees with an environment where pay transparency and dialogue on compensation are allowed. Mariani Enterprises LLC complies with Equal Employment Opportunity laws as well as federal, state, and local laws on compensation, pay transparency, and pay equity. $25/hr - $45/hr Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. This employer participates in E-Verify and will provide the Social Security Administration (SSA) and, if necessary, the Department of Homeland Security (DHS), with information from each new employee's Form I-9 to confirm work authorization. Employers can only E-Verify once you have accepted a job offer and completed the Form I-9. A part of the U.S. Immigration laws protects legally-authorized workers from discrimination based on their citizenship status and national origin. If you have the skills, experience, and legal right to work, your citizenship or immigration status shouldn't get in the way. Mariani Enterprises, LLC is proud to be an equal opportunity employer and does not discriminate in employment with regard to race, color, religion, national origin, citizenship status, ancestry, age, sex (including sexual harassment), sexual orientation, marital status, physical or mental disability, military status or unfavorable discharge from military service or any other characteristic protected by law.

Must have CDL - Class A and be able to drive manual. In this position - one will operate trucks and heavy equipment including, but not limited to, Boom Truck, back hoes, skid steers, front-end loaders with forks, and excavators. Additional operation of railroad equipment (tie inserter, regulator, etc.) will be required; on-the-job training for railroad equipment will be provided. When not operating; this person may be expected to assist as a Railroad Track Laborer; which is a pysically demanding job. Pay Rate: Starting at $30/hour; Commensurate with experience and licensure; Competitive pay Hours: Full-time; eligible for overtime Primary Activities and Responsibilities: Operate trucks and heavy equipment including, but not limited to, back hoes, skid steers, front-end loaders with forks, and excavators, and railroad equipment (tie inserter, regulator, etc.); on-the-job training will be provided. Work around all types of moving equipment. Perform manual labor as required. Ensure compliance with all railroad rules and regulations for safety, operations, NORAC, Employee Handbook, procedures, and the Federal Railroad Administration (FRA). Perform routine preventative maintenance of equipment. Assist with the troubleshooting of equipment malfunctions. Assist with the development of improved and new field methods and equipment. Other duties as assigned.

Job Description The Chemical Operator is responsible for the safe operation of equipment in a manufacturing facility, material handling, quality control, accurate recordkeeping, and maintaining housekeeping standards while following company policies and safety procedures. Essential Functions Operate and monitor plant systems (feeds, temperatures, pressures). Follow procedures and instructions from Leads and Managers. Sample, test, and record process streams per quality requirements. Accurately weigh and add raw materials; monitor inventory. Load finished products into bulk tankers, totes, and drums. Assist with maintenance preparations. Maintain housekeeping and Good Manufacturing Practices. Support compliance with OSHA, EPA, PSM, and safety policies. Input data into ERP system and complete logs/forms. Provide improvement suggestions to management. Participate in EHS and training programs. Must be willing to work overtime, nights, and weekends. Other duties as assigned. Skills & Qualifications High school diploma required; community college certificate preferred. 1-5 years of chemical or manufacturing experience (certificate in Chemical Plant Technician training may substitute). Basic Microsoft Office 365 skills. Knowledge of hazardous materials handling, OSHA/EPA compliance, and emergency response training. Strong mechanical aptitude and troubleshooting skills. Ability to work effectively in teams and interact with all plant levels. Full professional English proficiency (written & verbal). Flexible schedule availability.

Chemical Operator BestLogic Staffing is recruiting for a Chemical Operator. Shift Hours:11 pm - 7 am The Chemical Operator is responsible for the safe operation of equipment in a manufacturing facility, material handling, quality control, accurate recordkeeping, and maintaining housekeeping standards while following company policies and safety procedures. Essential Functions Operate and monitor plant systems (feeds, temperatures, pressures) Follow procedures and instructions from Leads and Managers. Sample, test, and record process streams per quality requirements. Accurately weigh and add raw materials; monitor inventory. Load finished products into bulk tankers, totes, and drums. Assist with maintenance preparations. Maintain housekeeping and Good Manufacturing Practices. Support compliance with OSHA, EPA, PSM, and safety policies. Input data into ERP system and complete logs/forms. Provide improvement suggestions to management. Participate in EHS and training programs. Must be willing to work overtime, nights, and weekends. Other duties as assigned. Skills & Qualifications High school diploma required; community college certificate preferred. 0-5 years of chemical or manufacturing experience (certificate in Chemical Plant Technician training may substitute). Basic Microsoft Office 365 skills. Knowledge of hazardous materials handling, OSHA/EPA compliance, and emergency response training. Strong mechanical aptitude and troubleshooting skills. Ability to work effectively in teams and interact with all plant levels. Full professional English proficiency (written & verbal). Flexible schedule availability. About BestLogic Staffing BestLogic Staffing is a top staffing firm partnering with some of the largest names in various industries. Our professional recruitment teams place talented individuals at client locations worldwide, providing hundreds of exciting career opportunities! To learn more about our process or speak with a recruiter directly, call 1-866-585-8055. BestLogic Staffing is an equal-opportunity employer.

Copart, Inc. a technology leader and the premier online vehicle auction platform globally, with over 200 facilities located across the world, Copart links vehicle sellers to more than 750,000 buyers in over 190 countries. We believe in providing an unmatched experience, every day and everywhere, driven by our people, processes, and technology. The Loader Operator will be responsible for moving and loading vehicles with a company-provided front-end loader or forklift. In addition, the Loader Operator will be required to maintain documentation of vehicle movement around the facility. Furthermore, the Loader Operator will be responsible for the daily pre and post-trip inspections and associated documentation of their assigned machine. In addition, the operator will maintain a safe work environment and be required to follow and be held accountable to company guidelines for safe loader operation. Finally, through a thorough understanding of Copart policy, the Loader Operator will facilitate the Copart experience by offering solutions to meet customers' needs. Ensures equipment is maintained according to company standards and customer contracts. Operates company equipment safely. Assists with the maintenance of company equipment and vehicles. Records vehicle information accurately and legibly. Operates digital camera or other basic vehicle documentation and tracking devices. Sets up yard for auctions within company timelines. Provides service to customers as needed. Maintains a positive and professional demeanor. Follows yard guidelines to maintain a safe working environment (i.e. speed limits, etc.). Must be able to load and unload vehicles as required. Must be able to pass training and safety requirements. Performs other duties as assigned. Required Skills & Experience: HS diploma or GED preferred. At least two years of work experience, preferably in an outdoor environment. One year of loader or forklift experience, certification preferred. Excellent customer service attitude and skills. Excellent communication skills, written and verbal. Positive attitude/High Integrity. Ability to operate heavy equipment. Must be able to multi-task in a fast-paced environment. Strong attention to detail. Occasional O.T. as needed. Bilingual skills a plus. Compensation: $23.40 - $26.31/hourly Benefits Summary: · Medical/Dental/Vision · 401k plus a company match · ESPP - Employee Stock Purchase Plan · EAP - Employee Assistance Program (no cost to you) · Vacation & Sick pay · Paid Company Holidays · Life and AD&D Insurance · Discounts Along with many other employee benefits. At Copart, we are focused on harnessing the power of diversity, inclusion, and collaboration. By embracing diverse perspectives, we open doors to innovation and unleash the full potential of our team. We are dedicated to fostering a workplace where everyone feels appreciated, included, and inspired to grow and contribute meaningfully. E-Verify Program Participant: Copart participates in the Department of Homeland Security U.S. Citizenship and Immigration Services' E-Verify program (For U.S. applicants and employees only). Please click below to learn more about the E-Verify program: E-verify Participation Right to Work

We are currently seeking a skilled and detail-oriented Press Operator to join our team. The successful candidate will operate mechanical power presses or hydraulic presses to produce high-quality parts from steel coils, adhering to work instructions and production standards. Essential Functions: · Obtain scheduled workloads from the coil line plan to the actual board. · Identify part numbers from assigned work orders, retrieve the orange part pattern from the pattern rack, and compare it to the first piece produced to ensure proper quality. · Submit the number of pieces produced on each work order in a timely manner following established procedures. · Remove dies from presses and return them to the proper storage area. · Set up new dies, square them in the press, and perform all other procedures required to set up the press for the assigned job. · Verify that the correct steel is placed on the coil reel. · Operate the press to manufacture parts according to work order requirements for quantity. · Perform daily preventative maintenance on the press, flattener, and coil reel. · Regularly check parts for quality according to established procedures. · Follow all lock-out/tag-out procedures and lock storage policies. · Report any nonconforming conditions to the supervisor. · Follow 7-S policies, procedures, and meet goals. · Adhere to all safety rules and policies, immediately reporting any unsafe conditions to the supervisor. · Maintain a neat and orderly work area. · Participate in all required training. Additional Responsibilities: · Return all tools and equipment to designated locations. · Empty scrap buckets from the assigned coil line as needed. · Move loads of completed parts to storage areas as required. · Perform other duties as assigned. Requirements · High school diploma or equivalent. · Basic math skills, including addition, subtraction, multiplication, and division. Ability to use a calculator. · Possess or be able to obtain equipment certification. · Ability to lift up to 40 lbs. · Possess manual dexterity and meet physical requirements for bending, twisting, and stacking parts in storage baskets in a piecework environment. · Ability to work efficiently in a fast-paced, team-oriented environment. · Ability to work effectively with a group of people with diverse abilities and backgrounds. Salary and Benefits: Salary: $20-24 per hour, negotiable based on experience. Schedule: Monday-Thursday, 6 am - 4:30 pm; Fridays dependent on workload. Benefits: - 401k with company match - Health Insurance - Dental Insurance - Vision Insurance - Profit Sharing - Life and Disability Insurance - Paid Time Off Join our team and contribute to the legacy of our growing, family-owned company. We offer a supportive work environment, competitive compensation, and opportunities for professional development. Apply today and become an integral part of our success story.

Play a key role in delivering high-quality medications and supplements to consumers worldwide. We're seeking a machine operator who thrives in a clean, regulated manufacturing environment. Help shape the future of wellness and apply today! Tower Laboratories is a leading effervescent product manufacturer in the U.S. We develop and manufacture over-the-counter medications, prescription pharmaceuticals, nutritional supplements, soft drink tablets and other consumer products on a contract basis. We are continually expanding our effervescent product base and currently have several new and interesting products in the research and development phase right now. We are a family owned company and have been in business for over 40 years. ****************** We have positions open at our CENTERBROOK and CLINTON locations! $17.50-$19.00 to start Plus, regular pay increases as training progresses. POSITION SUMMARY: We are willing to train the right, motivated individual to learn our tableting and packaging process. Operate and set up a wide range of manufacturing equipment which includes high-speed automated tablet presses and packager production line. Perform in-process testing and complete the necessary paperwork. Responsible for the efficient production of a high quality product. Perform all work in adherence to safety precautions, regulations and Good Manufacturing practices (cGMP) as required by the FDA. Tower Labs' production environment is clean and temperature and humidity controlled. Uniforms provided free of charge. POSITION QUALIFICATIONS: Dependability a must; we will be investing in you with training Mechanical aptitude with ability to troubleshoot and problem solve Basic math skills Ability to read and follow directions, complete paperwork and communicate effectively in English Ability to concentrate and focus on task under stressful and/or distracting conditions Ability to be a team player; good interpersonal skills Self starter with high level of motivation Ability to stand for entire shift, walk, bend, reach, climb ladder Ability to lift up to 40lbs on an occasional basis Ability to wear face mask, safety shoes & glasses, hairnet and gloves. No experience required, we will train! BENEFITS: Health insurance Dental insurance 401(k) 401(k) matching Employee assistance program (free counseling) Flexible spending account (FSA) Health Savings Account (HSA) Health Reimbursement Arrangement (HRA) Disability insurance Life insurance Paid time off Referral program Tuition reimbursement Vision insurance Free uniforms Safety shoe & Rx glasses reimbursement SCHEDULE: 8 hour shift Monday to Friday Day shift Night shift Overtime voluntary Full time SHIFT AVAILABILITY: 1st shift: 7:30 AM - 4:00 PM, Monday through Friday 2nd shift: 3:50 PM - 12:20 AM, Monday through Friday We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, pregnancy, age, national origin, disability status, genetic information, protected veteran status, or any other characteristic protected by law.

Location: North Kingstown, United States of AmericaThales people architect identity management and data protection solutions at the heart of digital security. Business and governments rely on us to bring trust to the billons of digital interactions they have with people. Our technologies and services help banks exchange funds, people cross borders, energy become smarter and much more. More than 30,000 organizations already rely on us to verify the identities of people and things, grant access to digital services, analyze vast quantities of information and encrypt data to make the connected world more secure. Position Summary This is an on-site position in North Kingstown, RI This position is eligible for the Americas referral program for external candidates: Tier 1 - $2500 Referral Bonus. Machine Operator will operate various card production equipment to personalize debit/credit cards according to customers' specifications. Work with other operators, technicians, and supervisory staff to achieve daily / monthly goals. Perform minor equipment maintenance and adjustments per written and oral instructions. Work independently, performing quality inspections on own work according to production standards. Identify potential production and quality problems, recommending remedial, corrective or contingency action. Awareness and compliance with all security and production policies & procedures. Essential Functions / Key Areas of Responsibility Must be able to work in a high-paced environment Operate card production equipment and perform related activities Confirm work receipt Formulate and implement work priority decisions Exceed production output and quality standards Perform minor equipment maintenance and adjustments per written and oral instructions Work independently performing quality inspections on own work to production standards Maintain a clean and orderly work area Identify potential production and quality problems; recommending remedial, corrective or contingency action Work with other operators, technicians and supervisory staff to assist with problems and to an effective work environment Awareness and compliance with all security and production policies/procedures Must possess basic computer skills Maintain housekeeping standards of workstation Order supplies as needed Attend appropriate training and meetings as required Meet safety standards Minimum Requirements High School Diploma or equivalent experience Basic computer skills Basic math skills required Good communication skills in both written and verbal Strong analytical, numerical and reasoning abilities Ability to write routine reports and correspondence Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form Ability to establish credibility and be decisive - but able to recognize and support the organization's preferences and priorities Preferred Qualifications 1-3 years' experience in mechanical ability 1-3 years' experience in safety rules and maintenance instructions Intermediate computer skills Physical Demands Required to be standing and operating a machine 6+ hours a day #LI-Onsite #LI-AS007 This position will require successfully completing a post-offer background check. Qualified candidates with [a] criminal history will be considered and are not automatically disqualified, consistent with federal law, state law, and local ordinances. We are an equal opportunity employer, including disability and veteran status. All qualified applicants will receive consideration for employment without regard to sex, race, color, religion, national origin, disability, protected Veteran status, age, or any other characteristic protected by law. If you need an accommodation or assistance in order to apply for a position with Thales, please contact us at ************************************. The reference Total Target Compensation (TTC) market range for this position, inclusive of annual base salary and the variable compensation target, is between Total Target Cash (TTC) 35,888.63 - 58,265.40 USD Annual This reflects how companies in a similar industry and geographic region generally pay for similar jobs. This range helps the Company make pay decisions as one data point among many. Where a position falls within this range is also dependent on other factors including - but not limited to - the employee's career path history, competencies, skills and performance, as well as the company's annual salary budget, the customer's program requirements, and the company's internal equity. Thales may offer additional benefits and other compensation, depending on circumstances not related to an applicant's status protected by local, state, or federal law. (For Internal candidate, if you need more information, please reach out to your HR Shared Service, 1st Point) Thales provides an extensive benefits program for all full-time employees working 30 or more hours per week and their eligible dependents, including the following: •Elective Health, Dental, Vision, FSA/HSA, Voluntary Life and AD&D, Whole Group Life w/LTC, Critical Illness, Hospital Indemnity, Accident Insurance, Legal Plan, Identity Theft, and Pet Insurance •Retirement Savings Plan after 30 days of employment with a company contribution and a match, and with no vesting period •Company paid holidays and Paid Time Off •Company provided Life Insurance, AD&D, Disability, Employee Assistance Plan, and Well-being Program

Heavy Equipment Operators will operate new state of the art CAT equipment. Arrival onsite at the directed time and availability for the entire duration of the storm is a must. Communicate regularly with the Site Foreman and report to site as directed. Visually inspect equipment, including pusher and attachment. Safely and efficiently operate equipment to clear site, according to the plow map. Perform equipment maintenance as requested (greasing machines, cleaning windshields, etc.).

North East Weathered Services, LLC is a trusted provider of snow removal. We pride ourselves on our commitment to safety, quality, and customer satisfaction. Our team operates in a fast-paced, outdoor environment, and we are looking for dedicated individuals to join us during our busy season. Job Description: We are seeking skilled and reliable Ventrac/Small Loader Operators for on-call, seasonal positions. The ideal candidates will be available to respond to work as needed, particularly during peak service times. The position requires operating Ventrac tractors and small loaders for snow removal. Qualifications: OSHA 10 certification is mandatory. Experience operating Ventrac tractors and small loaders is preferred. Availability to work on-call, including nights, weekends, and holidays as needed. Strong understanding of safety protocols and procedures. Ability to work independently and as part of a team. Reliable transportation to and from job sites. Physical Requirements: Ability to work outdoors in various weather conditions. Capable of lifting and moving materials up to 50 pounds. Physical endurance to perform manual labor as required. Compensation: Competitive hourly wage based on experience. North East Weathered Services, LLC is an equal opportunity employer. We encourage applications from individuals of all backgrounds and experiences.

Machine Operators & Assemblers for a Manufacturer in Farmington, CT! Pay: $17-21/hr (depending on experience) Shift: 1st, 2nd & 3rd shift available, 6am-2:30pm, 2:30-11pm OR 9pm-7am (Mon-Fri) The Responsibilities for Machine Operators & Assemblers are: Set-up, adjust & operate metal stamping machines Perform metal parts assembly work at various stations within the facility Using hand tools and mechanical equipment to produce structurally sound products Make minor repairs & adjustments to machine tools & equipment as required to support production demands. The Requirements for Machine Operator & Assemblers are: High School, Trade School graduate or demonstrated equivalent skills Previous general machine operating experience - 2 to 3 years Ability to read-understand blue prints as needed for production manufacturing Longevity in prior positions Westaff Offers Machine Operators and Assemblers: Free online classes Weekly Pay Medical, Vision, and Dental Opportunities for advancement APPLY TODAY for immediate consideration for the Machine Operator & Assembler positions!! Military and Veterans are Encouraged to Apply!