Operator jobs in Hobbs, NM

Plant Operator - Hobbs, NM This position is responsible for the operation of compressors, motors, cooling equipment, pumps, valves, pipelines, and other related gas processing equipment safely and reliably. This position ensures the cost-effective and efficient operation of gas processing and treating units and associated equipment within gas and liquid facilities and pipelines. DUTIES AND RESPONSIBILITIES Operate, inspect, and maintain equipment and systems at plant facilities which includes, but is not limited to: cryogenic plants, hydrocarbon fractionation units, process controls and measurement, LNG facilities, engines and compressors, pumps, pressure relief systems, instrument air systems, dehydrators, fuel systems, treating, emergency shutdown systems, gas fired heaters, process pumps, amine treating systems, inlet gas receivers and NGL storage and transfer facilities reliably and efficiently while in compliance with the Partnership's procedures and regulatory requirements • Seek to optimize processing through the facility by maintaining proper product specifications. • Respond to alarms and problems within the plant and take corrective measures. • Monitor and control pressures, temperatures, flow rates, and levels to efficiently achieve desired operating results and ensure proper operation of equipment under current process conditions, such as Start/Stop/Rate adjustment of equipment. • Demonstrated understanding in the maintenance and compliance of plant operations in alignment with partnership and environmental standards (PSM-SPCC-LDAR, Etc.), including the creation and maintenance of required reporting and readings. • Maintain and adhere to required trainings, policies, and procedures. • Actively participate in safety programs and initiatives. • Communicate with partnership control centers, business groups, and other operating groups as necessary. • Oversee the construction and/or maintenance activities performed by third parties. • May perform lab tests for quality assurance, diagnose mechanical problems, complete minor repairs as needed, assist other technical staff, and perform any other tasks as assigned or required. • Comply with company safety policies and procedures. • Perform energy isolation lockout/tagout procedures (LOTO).

Producers Midstream Management LLC is a private equity backed midstream service provider based in Dallas, TX. The Plant Operator is responsible for the operation of compressors, motors, cooling equipment, pumps, valves, pipelines and other related gas processing equipment in a safe and reliable manner. This position ensures the cost effective and efficient operation of gas processing and treating units and associated equipment within gas and liquid facilities and pipelines. Producers Midstream offers comprehensive benefits including medical, dental, 401k and more. Essential Duties and Responsibilities: * To perform this job successfully, an individual must be able to perform each essential job duty satisfactorily. The essential job duties for this position are listed but not limited to the following: * Operate, inspect, and maintain equipment and systems at plant facilities which includes, but is not limited to: cryogenic plants, hydrocarbon fractionation units, process controls and measurement, LNG facilities, engines and compressors, pumps, pressure relief systems, instrument air systems, dehydrators, fuel systems, treating, emergency shutdown systems, gas fired heaters, process pumps, amine treating systems, inlet gas receivers and NGL storage and transfer facilities in a reliable and efficient manner while in compliance with the Partnership's procedures and regulatory requirements * Seek to optimize processing through facility by maintaining proper product specifications. * Respond to alarms and problems within the plant and takes corrective measures. * Monitor and control pressures, temperatures, flow rates, and levels to efficiently achieve desired operating results and ensure proper operation of equipment under current process conditions such as Start/Stop/Rate adjustment of equipment. * Demonstrated understanding in the maintenance and compliance of plant operations in alignment with partnership and environmental standards (PSM-SPCC-LDAR, Etc.) including the creation and maintenance of required reporting and readings. * Maintain and adhere to required trainings, policies, and procedures. * Actively participate in safety programs and initiatives. * Communicate with partnership control centers, business groups, and other operating groups as necessary. * Oversee the construction and/or maintenance activities performed by third parties. * May perform lab tests for quality assurance, diagnose mechanical problems, complete minor repairs as needed, assist other technical staff and any other tasks as assigned or required. * Live within 60 - 65 miles of reporting location to accommodate call outs. * Respond to call outs no later than 2 hours from the time the call is sent. * Comply with company safety policies and procedures. * Perform energy isolation lockout/tagout procedures (LOTO). * Work assigned shift and be available for overtime if needed. * Perform related duties and responsibilities as required and other duties as assigned. * Comply with all internal, state and federal regulations. * Comply with company policies. * Maintain honest, respectful, and effective internal and external working relationships. * Complete all training as directed by management. Required Education: * High school diploma or equivalent. Required Qualifications: * Must maintain valid driver's license in state of residency. * Excellent organizational skills. * Excellent written and verbal communication skills with the ability to work effectively in a group environment. * Demonstrated self- starter with the ability to work independently and exercise good judgement. * Ability to work in a 24/7 operational environment, shift rotations, and perform call outs. * Must be able to react to high stress/emergency situations in a deliberate, thoughtful, and timely manner. Preferred Qualifications: * Minimum of 2 years related experience preferred. * Mechanical aptitude with ability to learn and perform operation and maintenance tasks associated with various types of facilities and equipment. * Proficiency with computers including MS Office applications such as Excel and Outlook as well as other computer-based work training, time reporting, expense reporting, and on-line work applications and documentation. * HIMI software operations experience. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. * Frequent exposure to heat, cold, and other adverse weather conditions. * Working conditions may include confined spaces. * Repetitively standing, walking, bending, stretching, reaching over shoulder height, and climbing ladders up to 25 feet. Occasionally lifting up to 50 lbs. with or without assistance. * Work in and around industrial and construction settings, which may include hazardous products, processes, materials and chemicals, as well as extreme temperature conditions and loud machinery, and may require appropriate personal protective equipment. * Reliable attendance at work. Equal Opportunity Employer

Producers Midstream Management LLC is a private equity backed midstream service provider based in Dallas, TX. The Plant Operator is responsible for the operation of compressors, motors, cooling equipment, pumps, valves, pipelines and other related gas processing equipment in a safe and reliable manner. This position ensures the cost effective and efficient operation of gas processing and treating units and associated equipment within gas and liquid facilities and pipelines. Producers Midstream offers comprehensive benefits including medical, dental, 401k and more. Essential Duties and Responsibilities: To perform this job successfully, an individual must be able to perform each essential job duty satisfactorily. The essential job duties for this position are listed but not limited to the following: Operate, inspect, and maintain equipment and systems at plant facilities which includes, but is not limited to: cryogenic plants, hydrocarbon fractionation units, process controls and measurement, LNG facilities, engines and compressors, pumps, pressure relief systems, instrument air systems, dehydrators, fuel systems, treating, emergency shutdown systems, gas fired heaters, process pumps, amine treating systems, inlet gas receivers and NGL storage and transfer facilities in a reliable and efficient manner while in compliance with the Partnership's procedures and regulatory requirements Seek to optimize processing through facility by maintaining proper product specifications. Respond to alarms and problems within the plant and takes corrective measures. Monitor and control pressures, temperatures, flow rates, and levels to efficiently achieve desired operating results and ensure proper operation of equipment under current process conditions such as Start/Stop/Rate adjustment of equipment. Demonstrated understanding in the maintenance and compliance of plant operations in alignment with partnership and environmental standards (PSM-SPCC-LDAR, Etc.) including the creation and maintenance of required reporting and readings. Maintain and adhere to required trainings, policies, and procedures. Actively participate in safety programs and initiatives. Communicate with partnership control centers, business groups, and other operating groups as necessary. Oversee the construction and/or maintenance activities performed by third parties. May perform lab tests for quality assurance, diagnose mechanical problems, complete minor repairs as needed, assist other technical staff and any other tasks as assigned or required. Live within 60 - 65 miles of reporting location to accommodate call outs. Respond to call outs no later than 2 hours from the time the call is sent. Comply with company safety policies and procedures. Perform energy isolation lockout/tagout procedures (LOTO). Work assigned shift and be available for overtime if needed. Perform related duties and responsibilities as required and other duties as assigned. Comply with all internal, state and federal regulations. Comply with company policies. Maintain honest, respectful, and effective internal and external working relationships. Complete all training as directed by management. Required Education: High school diploma or equivalent. Required Qualifications: Must maintain valid driver's license in state of residency. Excellent organizational skills. Excellent written and verbal communication skills with the ability to work effectively in a group environment. Demonstrated self- starter with the ability to work independently and exercise good judgement. Ability to work in a 24/7 operational environment, shift rotations, and perform call outs. Must be able to react to high stress/emergency situations in a deliberate, thoughtful, and timely manner. Preferred Qualifications: Minimum of 2 years related experience preferred. Mechanical aptitude with ability to learn and perform operation and maintenance tasks associated with various types of facilities and equipment. Proficiency with computers including MS Office applications such as Excel and Outlook as well as other computer-based work training, time reporting, expense reporting, and on-line work applications and documentation. HIMI software operations experience. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Frequent exposure to heat, cold, and other adverse weather conditions. Working conditions may include confined spaces. Repetitively standing, walking, bending, stretching, reaching over shoulder height, and climbing ladders up to 25 feet. Occasionally lifting up to 50 lbs. with or without assistance. Work in and around industrial and construction settings, which may include hazardous products, processes, materials and chemicals, as well as extreme temperature conditions and loud machinery, and may require appropriate personal protective equipment. Reliable attendance at work. Equal Opportunity Employer

At Devon, we will offer you a career full of energy and unmatched opportunities to solve today's greatest challenges. Innovation, creative problem-solving and positive change happen when people step out of their comfort zone and think differently. Our values, workplace practices, wellness programs, benefits and compensation are aimed at helping employees manage their unique personal life and care for their families so they can focus on contributing to the fullest. Working under limited supervision, the Optimization Operator is responsible for driving analysis of real-time data through Supervisory Control and Data Acquisition (SCADA) monitoring. The role leads collaboration with engineers, operators, and foremen for wells and lease activities, and optimizes producing and underperforming wells. The operator drives subsurface well maintenance, performs dynamometer, fluid shots, and Formation Bottomhole Pressure (FBHP) surveys, and maintains regulatory, environmental, and safety compliance. The role leads the identification of opportunities for operations cost reductions, reducing production variance, and improving job efficiency and safety based on subject matter expertise in field operations. The operator assists with orientation and training of lower-level employees and maintains a contact role for field operations, serving as a point of communication for all personnel during emergencies or significant occurrences, ensuring effective response and coordination. * Drives analysis of real-time data through Supervisory Control and Data Acquisition (SCADA) monitoring to facilitate informed decision-making and control complex processes efficiently. * Leads collaboration with Engineers, DSC/PA, Foremen, and Lease Operators for wells and lease activities, contributes in well reviews and route reviews, and troubleshoots and optimizes producing and underperforming wells. * Drives minor subsurface well maintenance limited to non-BOPE jobs (e.g., swab, slickline, plunger maintenance, hot oil/water, regulatory, routine testing, batch/chemical/scale jobs, long stroke/respace, cap string inspection, fluid levels, dynamometer) and performs dynamometer, fluid shots, and Formation Bottomhole Pressure (FBHP) surveys where applicable as planned or needed. * Serves as a subject matter expert in field operations, encompassing artificial plunger lift, surface facility equipment operations and repair, oil & gas well chemicals, and efficient time management practices. * Maintains regulatory, environmental, and safety compliance in conjunction with and through close coordination with the Operations Engineers, Superintendents, Foremen, and Environmental Health and Safety Department. * Leads identification of opportunities for operations cost reductions, reducing production variance, and improving job efficiency and safety based on expertise in field operations. * Works under general supervision to perform complex production operations tasks, including developing and implementing SOPs for maintenance processes, contributing to efficient operations, and ensuring safety protocols. * Assists with the orientation and training of lower-level employees, sharing knowledge and expertise on production operations, artificial lift optimization, and controls monitoring to support their professional development. * Maintains a field-wide contact role for field operations, serving as a point of communication for all personnel during emergencies or significant occurrences, ensuring effective response and coordination. * Stays prepared for travel and extended work hours on short notice. * Possesses the right and obligation to stop work in unsafe conditions, contributing to a safe and secure working environment for all personnel. Education: * High School Diploma/General Education Diploma (GED)/Higher Secondary education is required. Experience: * 7+ years of relevant experience, preferably in E&P Operations specializing in areas such as Lease Operations, Process Optimization, Equipment Operations and Repair or a related field. Industry experience is preferred. Competencies: * Oral & Written Communication * Results Oriented * Active Learning * Digital Literacy * Business Acumen Skills: * SCADA Systems * Root Cause Analysis (RCA) * Statistical Process Control (SPC) * Troubleshooting * Simulation Software and Modeling * Equipment Maintenance * Data Analysis * XSPOC or equivalent * Knowledge of Pi * Data Visualization Qualified applicants are considered without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, status as a protected veteran or other characteristics protected by law. For more information on Equal Employment Opportunity, please follow these links: EEO is the Law EEO is the Law Supplement Pay Transparency Provision

Yellowjacket Oilfield Services, LLC (“Yellowjacket”) is a privately held oilfield services company that offers fishing & rental, wireline, thru tubing, and various oilfield services across North America and offshore. The Yellowjacket team prioritizes our employees' safety and development while providing unparalleled expertise with superior quality service to our customers. We are currently seeking a Wireline Operator to join our growing team. Job Duties and Responsibilities Installs and disassembles (rig up/rig down) of wireline and pressure control equipment in accordance with original equipment manufacturer's standards including verification of applicable certifications. Assembles, secures, and disconnects equipment. Monitors, evaluates, and adjusts process or equipment to maximize quality and efficiency. Tasks are performed in accordance with applicable safety guidelines, as well as appropriate industry standards. Performs a combination of shipping, loading, and unloading duties. Follows all standard shipping practices and procedures with full compliance with Federal Motor Carrier Safety Regulations including additional transportation routing and scheduling requirements. Verifies and documents identity and quantity of all equipment. Operates, maintains, and troubleshoots wireline truck and equipment including diagnostics, as well as keeps records for the overall operation. Drives Company vehicles and equipment: wireline trucks, cranes, pickup truck, pickup truck with trailer. Ensures compliance with all regulations applicable to wireline explosives operations. Cleans and maintains company vehicles, tools, & equipment; troubleshoots tool, equipment, and truck problems; redresses tools in the shop and in the field. Provides support to crew members with operations on and off location and liaise with technicians on equipment failure. Performs other duties as assigned. Requirements Qualification Requirements High school diploma or equivalent. Valid CDL and acceptable MVR. CDL with Hazmat and state blaster license preferred. Ability to timely obtain CDL with Hazmat Endorsement and state blaster license required. Ability to work independently and as a team with other crews, particularly when under pressure in situations where priorities change or emergency situations. Must be able to lift up to 50 lbs. Ability to stand, bend, stoop, twist, squat, crawl and walk; may have long periods of standing or sitting. Exposure to working outdoors and extreme weather conditions. Ability to effectively communicate, both verbally and written. Basic writing, math and computer skills. Must have flexibility to work any schedule based on business needs and travel as job requires. Ability to clear/pass pre-employment screening, testing and job-relevant hiring requirements. Yellowjacket Oilfield Services, LLC is an EEO employer. We offer a competitive benefits package that includes medical, dental, vision, and other supplemental insurances, PTO, Company paid holidays, and a 401(k) plan.

KLX Energy Services LLC provides a broad range of technical solutions and equipment to our customers. We provide the right people, best equipment and most convenient locations to deliver expert energy services for every phase of the wellsite. This includes drilling, completions, re-fracing, production, workover, and plug and abandonment. From technical services and wireline to rentals and accommodations, we keep our customers operations running economically, effectively and safely. At KLX, you'll work side-by-side with devoted professionals. You'll enjoy the benefits of a strong and evolving company; such as excellent compensation and benefits packages, limitless opportunities for professional growth, and a voice in shaping our future. All while working in an environment that emphasizes teamwork, integrity, and professionalism. We are currently seeking a Reverse Unit Operator for our Hobbs, NM location. PURPOSE: Participates in the planning, execution, and management of all phases of any Fishing, Thru-Tubing, Reverse Unit, Air Packages, Nitrogen Services, and/ or Pressure Control operations to ensure delivery of services according to client requirements and expectations. Responsible for supervising technical services operations on well site. ESSENTIAL JOB DUTIES AND RESPONSIBILTIES: • Provides technical support to crew and clients at the well site; maintains communication with client well site representative, rig crew, and field support staff; communicates with internal and external clients • Plans and coordinates operations utilizing technical expertise to determine the need, technique, and use of equipment on a well site • Advises customer on proper procedures to perform operations and provide instruction; troubleshoots issues on well site to reduce non-productive time; supervises operations on well site • Manages storage and inventories of supplies and fixed assets on the rig. • Ensures work is performed in compliance with all local, state, and federal regulations as well as company and industry standards • Prepares and delivers comprehensive job documentation • Trains, coaches, and mentors trainees • Develops expertise on advanced techniques; participates in knowledge sharing • Performs other duties as assigned MINIMUM QUALIFICATIONS: Education: Less than High School Education Degree Field (s): • Work Experience: 4-6 years Supervisory Experience: Not Applicable Related Experience: • Relevant experience in open-hole and/or cased-hole operation • Minimum of 2 years' relevant product line experience • High mechanical aptitude **Fishing/Thru-Tubing Operations: • Extensive knowledge of Fishing, Thru-Tubing, and related services **Reverse Unit, Power Swivels, Air Packages, Pressure control, and Nitrogen Services Operations: • Extensive knowledge of Motors, Pumps, Compressors and Power Swivels and pressure control relating to a drilling, completion or production operation and related services PREFERRED QUALIFICATIONS: Education: High School Diploma/Equivalent Degree Field (s): • Work Experience: 6-8 years Supervisory Experience: 1-3 years Related Experience: • Proficient with MS Office Suite PHYSICAL REQUIREMENTS: Precise hand/eye coordination: Constantly Basic keyboarding or other repetitive motions: Frequently Operation of heavy equipment or operation of vehicles: Frequently Lifting/pushing objects weighing over: > 50 lbs: Occasionally Climbing and working in awkward and cramped positions: Frequently Other (please specify): • Employee lifts/carries 71 max lbs. occasionally • Employee's position requires pushing a maximum force of: 56 ft./lbs. • Employee's position requires pulling a maximum force of: 56 ft./lbs. • Ability to work on level and unleveled surfaces as well as up and down ladders and stairs • Exposure to inclement weather, bright lights, loud noise, dust, gas, and/or fumes EOE/Minorities/Females/Veterans/Disabled. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status.

We are committed to a policy of Equal Employment Opportunity and will not discriminate against an applicant or employee based on race, color, religion, national origin, sex, age, disability, veteran status, genetic information, marital status, or any other legally recognized protected status under federal, state or local laws, regulations, or ordinances. Applicants with disabilities may be entitled to reasonable accommodation under the Americans with Disabilities Act or other laws. Please inform a personnel representative if you need accommodation to participate in the application process. We look to hire diverse talent and ensure that we treat you with respect and support throughout the interview process and if you join Steel Energy, we embrace diversity and strive to create conditions that provide everyone with an equal opportunity to thrive and be included in all workplace opportunities. MAIN FUNCTIONS: Under the circumstances that the Rig Operator is not able to complete his job duties as assigned the Relief Operator will assume the role of Operator. Under the direction of a Rig Manager, the Rig Relief Operator organizes the rig crew (Floor Hands and Derrick Hands), conducts Job Safety Meetings, delegates the collection of materials and equipment needed to perform the contracted services, drives the Rig to the work site, operates the rig and equipment and directs the crew to set-up and prepare the rig for the tasks to be performed. Directs the assigned floor hands and derrick hands to safely perform the service tasks contracted by a client utilizing the equipment provided by the employer; documents services performed, the billable supplies used during the process and the time elapsed while performing the contracted services. The Rig Relief Operator uses specialized equipment to guide instruments, tubing, and casing down holes. He must keep his working environment in a clean and organized fashion and is responsible for ensuring that all the equipment he uses is in proper working order. Relief Operators' duties also include cleaning, fueling, repairing, and maintaining workover rig equipment to include greasing, changing oils and lubricants as needed and on a regularly scheduled basis. JOB RESPONSIBILITIES: * Available to work beyond the traditional 8-hour workday; available to work Saturdays, Sundays, and Holidays, to meet operational needs. Well services work is generally performed during daylight hours, Monday through Friday, occasionally on Saturday and or Sunday. Certain operations cannot, however, be completed during a single daylight period and must be continued without interruption, over several consecutive days. Such operations are referred to as "24-hour operations," and require two or more shifts, crews, to operate the rig. Able to work at heights up to or greater than 50 feet. * Dependability is imperative. Reporting for work at the prescribed location and time, dressed for deployment to work, is essential. Unauthorized absences will result in discipline up to and including employment termination. * Performing maintenance services and repairs on oil and gas wells as part of a three-to-five-person crew. * Lead the daily pre-job tailgate safety meetings and writing JHA's. * Inspecting and documenting all lift equipment on location including but not limited to derrick harness, lanyard, SRL's, chains and cables, drill line and sand line. * Lead the crew in the rigging up and rigging down of the workover Rig in a safe manner and performing/documenting post rig up inspections. * Pulling and laying down Rods, Tubing and Casing by operating the rig controls. * Guide and manage the rig crew daily. * Assist in training and mentoring SSE employees and floor hands as needed. * Assist Rig Manager in various tasks anywhere on the rig as directed by Rig Manager * Driving company vehicles such as the Crew pick-up truck and the Rig. * Workshop and SWS Yard maintenance and repair work as required. * Assist Steel Energy Services management personnel as required. * Prepare rig tickets correctly and in a timely fashion to include correct pricing on rig rates, re-billable items, manage hours for crew members daily. * Position the rig, raise, and lower the mast. Direct other crew members in rigging up guy-lines, various equipment, and tools; lift, remove, install, and operate wellhead, pumping units matting boards, tubing, rods, casing, rod strippers, polish rods, stripper heads and other production equipment in a manner consistent with safe operating procedures to perform the contracted services. * Complies with the client's and the company's safe operating procedures. All activities are to be performed consistent with the company's Safe Operating Procedures, to provide the maximum protection for all workers at the work site, the environment, the equipment; and complete the tasks efficiently. * Incumbent employees are expected to participate in company provided training in rig operations, Standard Operating Procedures, and safe work procedures. * Complies with the client's and the company's safe operating procedures. All activities are to be performed consistent with the company's Safe Operating Procedures, to provide the maximum protection for all workers at the work site, the environment, the equipment; and complete the tasks efficiently. EMPLOYMENT PREFERENCES: * High school Diploma, GED or equivalent * 1-2 years of Floor Hand experience * 1-2 years of Derrick hand experience * Advanced Problem solving and organizational skills. * Excellent customer service, interpersonal skills and verbal / written English communication skills. * Ability to multi-task and work in a fast-paced environment, run pipe Talley's, figure pipe weights, keep good pipe counts, know how to space out pumping units, run and pull ESP's, know pipe torques specifications, pick up and operate power swivel and principles of operating mud pumps. * Supervisory level of well control training * Class B CDL license to drive workover rig (not required-but encouraged) * Ability to bend, stoop, and lift objects of up to seventy-five pounds (75#) for extended periods of time. * Basic Computer skills * This position requires standing, walking, and sitting while working either indoors or outdoors. * Ability to pass company's pre-employment exam that also consists of a drug screen and physical. * Acceptable criminal history * Ability to read, write and speak English to the extent that they can understand verbal and written instructions as well as give verbal and written instructions in English; and the ability to use simple mathematical calculations using whole numbers, fractions, and decimals (addition, subtraction, division, and multiplication) to make job related calculations. The DOT Authority for this position is: Black Hawk Energy Services/Sun Well Services 118 84th Street W Williston, ND 58801

***This job has preference to qualified local job seekers within 60 miles of Axis Andrews, TX facility. The Rig Operator, reporting to the assigned Tool Pusher/Field Supervisor, leads a 4-5 person Plug & Abandonment (P&A) rig crew, and is responsible for performing and safely operating well P&A components and services. The primary responsibilities include and is not limited to preparation of crew members, inspection, maintenance, and operations of assigned P&A rig, in accordance with company procedures and customer requirements. Additional functions may be specified by the assigned Tool Pusher or other designated operations management. All duties are expected to be performed safely and effectively to maximize the safety of the entire crew while meeting customer expectations and being a solution to their projects by Axis operating safety and performance standards. Essential Duties and Responsibilities The essential functions include, but are not limited to the following: Confirms all scheduled shift times that the full crew are prepared for work at the assigned rig. Supports the P&A crew and is responsible for performing operating functions, including driving the P&A rig as necessary to the job site, with direction from the field supervisor/Tool Pusher, and/or the customer company representative. Inspects the setting up, taking down and transportation of the assigned P&A rig. Conducts routine inspection and trouble shooting on all service equipment. Monitors, tests, installs, lifts, and removes equipment using proper job and safety procedures. May train and direct the crew on safety and job procedures. Handles job safety analysis and daily maintenance program for the rig, ensuring the crew understands the programs and procedures. May be requested to work outside of the assigned work schedule to meet customer needs. Depending on project and rig assignment, may be required to perform other functional duties as assigned by Tool Pusher/Field Supervisor. Minimum Qualifications (Knowledge, Skills, and Abilities) High school High School Diploma, GED or equivalent education. Minimum two (2) years of Tool Pusher/Field Supervisor P&A rig experience. Minimum five (5) years proven experience as a Rig Operator. Must have valid, active state-issued Class C driver's license; CDL Class A or B is a plus; acceptable MVR required. Must be able to work a varied rotational schedule and travel as job requires. Proficiency in Microsoft Office (especially Word and Excel) Ability to effectively service mechanical functions. Ability to lift heavy equipment up to 75 lbs. Ability to access the work environment by use of a ladder at heights of 50 ft. or more. Long periods of standing, squatting, kneeling, reaching or similar activities may be necessary. Able to perform duties with protective equipment, H2S respirator where required; potential hazards include working near or with heavy tools and moving machinery. Must be able to travel as job requires. Work may be performed in all weather conditions. Ability to effectively communicate, both verbally and written; English preferred. Ability to interact with others in a team environment and work in a fast-paced environment and handle multiple tasks at once. Basic problem solving and organizational skills. Excellent customer service skills, to provide world class value to Axis customers. Have dependable form of communication - cell phone preferred. Dependable transportation. Ability for qualified clearance on background checks, pre-employment drug and alcohol and job-relevant screens.

Duties & Responsibilities - Monitor and manage all production within the oil and gas processing facility to maximize production - Monitor and operate all gas processing equipment, including compressors and operate engines and pumps - Willing and able to operate plant equipment in all areas of the plant, including compression and DCS - Works effectively with others to minimize plant downtime - Maintain all company provided tools and equipment - Perform routine maintenance of production equipment, diagnose / troubleshoot and repair minor issues - Aware of DT effects on volumes; understand alarm management to minimize DT - Optimize processing throughout the facility and maintain proper product specifications - Perform repairs with limited supervision, report needed repair of all compressors, engines and pumps to Maintenance - Make minor adjustments to instrument control panels that regulate gas pressures, flow rates, temperatures, and fluid levels - Basic knowledge of routine maintenance such as changing filters, washing and flushing instruments, cleaning air coolers and exchangers, and performing lab analyses - Prepare EPA engine log sheets for every shift; prepare daily plant report; maintain all employee related paperwork, time sheets, logs, etc. as needed in a timely manner - Efficient in the operation of DCS (Distributed Control Systems) to monitor controls panels - Understand and comply with SOPs; follow/ support all HSE policies at all times - Use appropriate PPE at all times as work environment may include moving mechanical parts, fumes, toxic chemicals, airborne particles and moderate to loud noise - Know and comply with all PSM regulatory requirements - Basic knowledge of operations of multiple gas processing plants, booster stations and compressor stations - Able to demonstrate proficiency in gas plant and outside operations and maintenance - Practice spill prevention countermeasures, control reporting, and monitor environmental compliance - Perform security and equipment facility rounds; minimize downtime and unsafe conditions - Complete daily, weekly, monthly and annual inventory reconciliation including agency and other required reports - Perform other various tasks as assigned by the Foreman Skills & Specifications - Ability to work with a diverse team - Possess a working knowledge of process equipment, separation, flow, etc. - Has basic computer skills; data entry into various electronic databases - Ability to work safely and adhere to all company guidelines, policies, and procedures - Has integrity, good communication skills, and a positive attitude - Maintains good housekeeping in all areas of responsibility - Willing to work rotating shifts Education & Qualifications - 0-2 years in gas plant and outside operations or equivalent experience - Possess a valid driver's license, CDL a plus (and may be required in some locations) - Legally authorized to work in the United States - Able to pass a pre-employment drug and background check - Must possess a high school diploma or GED equivalent from an accredited, state-certified program - Certifications from trade schools and/or professional organizations are preferred - Must be capable and willing to work overtime as required and participate in an on-call rotation - Knowledgeable in operating and maintaining equipment within oil and gas facilities - Capable of lifting/carrying/pushing/pulling up to 50lbs - Capable of rigorous outdoor activities with physical ability to work extended hours, climbing, bending, kneeling, squatting, working with arms extended above the head, twisting upper body, standing for long periods, working in confined spaces, exposure to extreme weather conditions, driving a vehicle, operation of forklifts and light industrial equipment

Energy Transfer, recognized by Forbes as one of America's best large employers, is dedicated to responsibly and safely delivering America's energy. We are driven to inspire our employees to create superior value for our customers, our investors, a sustainable future and giving back to the community where we have long-standing commitments to causes including MD Anderson Children's Cancer Hospital, The Salvation Army, The American Red Cross, Ronald McDonald House and many more. We value all of our employees who make our growth and success possible. We are proud to offer industry leading compensation, comprehensive benefits, 401(k) match with additional profit sharing, PTO and abundant career opportunities. Come join our award winning over 12,000 strong organization as we fuel the world and each other! Summary: This position is responsible for the operation of compressors, motors, cooling equipment, pumps, valves, pipelines and other related gas processing equipment. This position ensures the cost effective and efficient operation of gas processing and treating units and associated equipment within gas and liquid facilities and pipelines. Essential Duties and Responsibilities: To perform this job successfully, an individual must be able to perform each essential job duty satisfactorily. The essential job duties for this position are listed below: * Operate, inspect, and maintain equipment and systems at plant facilities which includes, but is not limited to: cryogenic plants, hydrocarbon fractionation units, process controls and measurement, LNG facilities, engines and compressors, pumps, pump stations, pressure relief systems, instrument air systems, dehydrators, fuel systems, treating, emergency shutdown systems, reciprocating compressors, gas fired heaters, process pumps, amine treating systems, inlet gas receivers and NGL storage and transfer facilities in a reliable and efficient manner while in compliance with the Partnership's procedures and regulatory requirements * Seek to optimize processing through facility by maintaining proper product specifications * Respond to alarms and problems within the plant and takes corrective measures * Monitor and control pressures, temperatures, flow rates, and levels to efficiently achieve desired operating results and ensure proper operation of equipment under current process conditions such as Start/Stop/Rate adjustment of equipment * Demonstrated understanding in the maintenance and compliance of plant operations in alignment with partnership and environmental standards (PSM-SPCC-TNRCC) including the creation and maintenance of required reporting and readings * Maintain and adhere to required trainings, policies, and procedures * Where applicable, the selected candidate will be required to pass all PSM-required operator certifications * Actively participate in safety programs and initiatives * Communicate with partnership control centers, business groups, and other operating groups as necessary * Oversee the construction and/or maintenance activities performed by third parties * May perform lab tests for quality assurance, diagnose mechanical problems, complete minor repairs as needed, assist other technical staff and any other tasks as assigned or required * May monitor field compressor status through the use of SCADA * Comply with partnership safety policies and procedures * Perform energy isolation lockout/tagout procedures (LOTO) Required Education: * High school diploma or GED Required experience is commensurate with the selected job level: * Level C requires a minimum of 0 - 2 years of relevant industry experience or equivalent work experience * Level B requires a minimum of 2 - 4 years of relevant industry experience or equivalent work experience * Level A requires a minimum of 4+ years of relevant industry experience or equivalent work experience Required Qualifications: * Must maintain valid driver's license in state of residency * Excellent organizational skills * Excellent written and verbal communication skills with the ability to work effectively in a group environment * Demonstrated self- starter with the ability to work independently and exercise good judgement * Ability to work in a 24/7 operational environment, shift rotations, and perform call outs * Must be able to react to high stress/emergency situations in a deliberate, thoughtful, and timely manner Preferred Qualifications: * Mechanical aptitude with ability to learn and perform operation and maintenance tasks associated with various types of facilities and equipment * Proficiency with computers including MS Office applications such as Excel and Outlook as well as other computer based work training, time reporting, expense reporting, and on-line work applications and documentation. * HIMI software operations experience The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. * Frequent exposure to heat, cold, and other adverse weather conditions * Working conditions may include confined spaces * Repetitively standing, walking, bending, stretching, reaching over shoulder height, and climbing ladders up to 25 feet. Occasionally lifting up to 50 lbs with or without assistance * Work in and around industrial and construction settings, which may include hazardous products, processes, materials and chemicals, as well as extreme temperature conditions and loud machinery, and may require appropriate personal protective equipment * Reliable attendance at work * Occasional overnight travel may be required.

Performs basic operations for Acidizing and Cementing related functions for designated District. Assists in various aspects of Acidizing and Cementing operations, including pre-job preparation, mobilization, rig up, on site operations, rig down, on-site maintenance, safety, environmental assurance, de-mobilization, post job inventories and maintenance. Ensures that all equipment assigned is properly functioning and all applicable procedures and tests are conducted in compliance with company standards. Essential duties include the following: Champions the company's H.S.E.&T program in all aspects of work performed to provide quality service in a safe and efficient manner. Operates and maintains auxiliary and support equipment. Performs pre-trip and post-trip inspections, as needed. Serves as a Mentor to other CCA personnel. Follows supervisor guidance concerning all operations. Attends all required safety meetings (on-site and off). Performs any and all job duties as assigned by supervisory personnel including general labor, as necessary. This position is required to perform safety sensitive functions as defined in the CES Drug and Alcohol Plan. Equal Opportunity Employment

Enterprise Products Partners L.P. is one of the largest publicly traded partnerships and a leading North American provider of midstream energy services to producers and consumers of natural gas, NGLs, crude oil, refined products and petrochemicals. Our services include: natural gas gathering, treating, processing, transportation and storage; NGL transportation, fractionation, storage and import and export terminals; crude oil gathering, transportation, storage and terminals; petrochemical and refined products transportation, storage and terminals; and a marine transportation business that operates primarily on the United States inland and Intracoastal Waterway systems. The partnership's assets include approximately 50,000 miles of pipelines; 260 million barrels of storage capacity for NGLs, crude oil, refined products and petrochemicals; and 14 billion cubic feet of natural gas storage capacity. The Plant Operator is responsible for the day-to-day operations and maintenance of natural gas amine treating plants, compressors and pipeline systems via both computer control center and onsite operations. Other responsibilities include, but are not limited to: * Operate natural gas plant and pipeline equipment including, but not limited to: amine treating plants, chilled water gas conditioning skids, reciprocating natural gas compressors, TEG dehydrators, fluid separation equipment, valves, gas measurement equipment, etc. * Operate plant equipment & system. * Start-up/Shutdown of plant equipment. * Adjust controls to operate equipment in the recommended or prescribed operating ranges. * Visually inspect equipment and controls at periodic intervals to detect malfunctions or need for repair, adjustment or lubrication. * De-pressure equipment and pipelines. * Operate valves. * Monitor plant and pipeline operations and respond to emergency or upset conditions. * Operate under Process Safety Management (PSM) as required. * Implement safe work practices and participate in proactive safety culture while ensuring safety for the employee, public and environment at all times. * Monitor gas gathering system through SCADA and make calls to alert customers of situations that could affect gas deliveries. * Ensure regulatory compliance and record keeping requirements are met and continually monitored. * Read, monitor and record various operating conditions such as pressure, temperature, hours of operations, fuel consumed, water levels, etc. * Perform minor maintenance on equipment including, but not limited to: reciprocating natural gas compressors, TEG dehydrators, fluid separation equipment, valves, etc. * Monitor, remove and replace filters, oil, chemicals, other lubricating fluids, gaskets, and valves as needed. * Change gauges. * Maintain sites in a clean condition including picking up/taking out trash, control weeds and grassy areas, minor painting, etc. * Clean out site glasses as necessary. * Change out suction/discharge valves on natural gas compressors, light bulbs, and fuses. * Improve upon meeting the needs and demands of customers. * Maintain a near perfect driving record. * Direct and supervise contract labor involved in plant maintenance activities. * Collaborate with direct supervisor on new and improved ideas associated with an evolving plant and pipeline system. * Work a rotating 12 hour shift schedule. The successful candidate will meet the following qualifications: * A minimum of a high school diploma or G.E.D. equivalent is required. * Technical certification or equivalent training in a mechanical environment or energy related field is preferred. * A valid driver's license with acceptable driving record is required. * Knowledge of the operation, control and general design of various kinds of systems typically present in a processing or fractionation plant is required. * The ability to perform basic mathematical calculations, such as, percentages, ratios and proportions to practical solutions is required. * Basic computer skills such as: opening, creating and updating content in MS Word documents and Excel spreadsheets is required. * Ability to assume responsibility, be flexible, perform duties and handle multiple tasks under potentially stressful and/or hazardous conditions. * The ability to effectively communicate, both verbally and in writing, with other individuals, teams, customers, and stakeholders of the business, at various levels of the organization, in a business like and professional manner is required. * The ability to modify communication style in order to influence, persuade, negotiate, and engage all parties according to the audience and circumstance is required. * Takes initiative and is proactive in addressing issues. Quickly and efficiently completes tasks. * The ability to demonstrate conscientiousness, dependability and commitment to the role, team and company. * The ability to work in a fast paced environment with less definition, policy, and bureaucracy. * Works indoors and outdoors in and around industrial and electrical equipment. * Works in temperature extremes due to weather conditions and operating equipment. * Uses physical force to lift, push, pull and hold equipment and tools. * Climbs and works at various heights and may work in a standing, sitting, lying down, crouched or kneeling position. * Routinely reacts to visual, aural and other signals, including alarms and instructions, and is required to visually inspect work. * May work in confined spaces (i.e. tanks, between compressors, vessels). * Must be able to regularly bend, stoop, move from ground level to higher levels, raise/lift from ground level and lift up to 50 lbs., manually transport a load up to 75 lbs., apply up to 100 foot pounds of torque. * Must have ability to get in and out of vehicles regularly and ride over rough roads. #LI-MP1

Job Details TexMex - Hobbs, NM NoneDescription Tex-Mex is located in Hobbs, NM and provides variety of oilfield services for the purpose of workover or completion operations. Tex-Mex offers a wide range of support services including, hot oilers, dump truck haulers, sandblast, and coating, frac tank haulers, vac truck haulers, kill trucks, and trash trailers. Tex-Mex is managed by seasoned industry veterans and services blue-chip customers in the Permian Basin and New Mexico with a substantial asset base, strong safety culture and industry-leading operating procedures. Tex-Mex has partnered with Nichols Oil Tools and American Well Services to provide a full suite of completions and workover solutions to customers throughout the Permian Basin and New Mexico. The Vacuum Truck Operator will perform manual tasks and assist with the repair of oilfield equipment. Responsibilities: Vacuum Truck Operator will drive and operate the truck in picking up, hauling, and unloading various oilfield related fluids - fresh water, brine/salt water, crude oil, frac fluids and other associated well servicing fluids. These fluids are pulled from customers' various oilfield locations and is collected in tanks and/or other containers. Verifying the types of materials being transported and ensuring that they do not exceed weight restrictions. Filling out Daily Inspection before and after every trip, which includes checking the oil, gas, and water levels as well as the lights, tires etc. Promptly reporting any accidents, injuries or mechanical faults to supervisor and management. Performing regular maintenance to ensure that the truck is in good working order. Maintaining accurate driver logs. Complying with all DOT safety rules and regulations. Dismantles oilfield machinery. Ensures that work areas are clean and safe. Follows safety guidelines and regulations. Attend monthly safety meetings. Follow on-call schedule. Performs other duties as assigned. Qualifications Required Skills/Abilities: 3 years with CDL License Excellent mechanical skills. Be able to perform simple mathematical calculations using whole numbers, fractions, and decimals (addition, subtraction, division, and multiplication). Ability to read, write and speak English so that all instructions are understood. Thorough knowledge of oilfield machinery and repair. Ability to understand and write proper JSA's for every job/location. Ability to follow instructions from supervisors or senior workers. Ability to use hand tools and power tools. Excellent analytical and problem-solving skills. Valid Class A driver license along with tanker endorsements and a clean driving record. Must be over 21 years or older as drivers will cross Texas state line. There will be some evenings, nights, weekends, and holidays that will be required. Education and Experience: 1 year of previous related experience preferred ; on-the-job training provided. Physical Requirements: Physically able to perform heavy manual labor. Prolonged periods of walking, sitting, standing, kneeling, bending, pull or push, reach, and climb. Must be able to work in all outdoor elements for extended periods of time. Must be able to lift at least 50 pounds at a time. Benefits: Health insurance Dental insurance Vision insurance Short-Term and Long-Term Disability Life Insurance Paid time off 401k Candidates will be required to successfully complete pre-employment screening, which includes criminal background check, MVR history, drug and alcohol test, and a DOT physical.

Job Details Experienced Loop, TX - Loop, TX Undisclosed N/A Full Time High School $27.00 - $30.00 Hourly None Any Skilled Labor - TradesDescription Duties and Responsibilities Monitoring equipment, making adjustments to process controls, taking routine readings, performing preventive and minor maintenance, troubleshooting operational problems, and handling paperwork associated with regulatory permitting in order to improve plant system operation/uptime and reduce total operating costs. Qualifications Required Qualifications At least High School grad or G.E.D. 3+years preferred with a responsible attitude for personal safety and the safety of co-workers, contractors &the public. Ability to work 12 hour, rotating shifts. Basic knowledge of plant processes. Basic knowledge of OSHA 1910.119. Knowledge of technical math skills. Capable of performing preventive maintenance and minor repairs on all required plant equipment. Ability to efficiently and effectively monitor plant equipment and make adjustments to processes and controls. Ability to troubleshoot operational problems. Ability to handle upsets, startups, and shutdowns to plant systems and processes Knowledge of DCS systems (Delta V). Ability to perform lab tests such as cooling tower and R/O unit water tests and SRU chemical tests. Ability to work effectively in a team environment. Ability to manage multiple responsibilities/priorities simultaneously. Must meet established CNR's goals and work standards. Good computer skills, along with ability to input data into excel format. Good communication and excellent interpersonal skills. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Ability to perform heavy manual labor, frequently lifting up to 75 pounds and occasionally up to 100 pounds with the assistance of applicable equipment or other employees. Ability to meet color and peripheral vision requirements. Must be able to work from heights with the assistance of proper safety equipment. Ability to work in all outdoor weather conditions.

Job DescriptionDescription: Ensure proper working of all equipment by inspecting it before and after use. When necessary, and asked, perform routine maintenance on the machines or recommend they be sent out for repairs. Must always follow company and governmental safety guidelines. Inspect machine daily 360 walk around to check hydraulic hoses for leaks Document any damage or wear on the machine Ensure equipment is free of trash and debris daily Fuel equipment daily with drag up tank, and log all fuel use Walk the work area before work commences to identify any hazards or unidentified underground pipelines. Notify immediate supervisor of any maintenance needs. Inspect large equipment before and after use to ensure it is working properly Provide support to successful completion of construction and engineering work Operate all heavy equipment like cranes, earth movers, bulldozers, front-end loaders, and other related equipment. Operate the equipment in the right direction and angles to prevent accidents and damage of property. Ensure and manage the machines or equipment in a safe and secure way. Perform periodical safety, maintenance, or servicing checks to ensure proper functioning of the equipment. Examples include: grease equipment daily, blow out air filters daily, blow out cabin filters daily Perform minor repair work during functioning problems Inform and advise the management or repairmen for major repairs or maintenance Drive and control the equipment Perform road work, excavation work, lifting work, etc. Respond to signals and directions by the staff and work in coordination with them Maintain proper coordination and cooperation with the road and transport system while driving/working, so that the normal activities are not disrupted. Operate the equipment manually and also through the use of electronic or technical methods of operation. Work in adherence to safe practices, procedures, work site or traffic laws. Requirements:

Time Type: Part time Role Details: Time Type: Part Time Starting Pay: $14.50 / HR The Yard Crewmember will assist customers in the lumberyard, operate a forklift, stock products, and provide general store support. Supervisory Responsibilities: None. Duties/Responsibilities: Greets customers as they enter the yard. Loads and unloads products into customers, vendors, and company vehicles safely and accurately. Responds to customer's questions regarding products. Informs store management or supervisor of any customer complaints or requests in a timely manner. Moves, stocks, and rearranges building materials in the yard, warehouse, and interior of store. Performs routine safety checks on forklifts according to company guidelines. Maintains the cleanliness and appearance of the lumberyard and warehouses, by stacking products squarely and picking up bands, chocks, and trash. Verifies customer or vendor ticket matches the merchandise that is being loaded. Covers exposed materials, when required, to prevent weather damage. Cuts lumber and other related materials as requested by the customer. Operates a forklift. Attends all store meetings and training sessions. Performs other related duties as assigned. Required Skills/Abilities: Ability to carry out a series of instructions without constant supervision. Able to remain professional and courteous at all times. Knowledge of weight distribution and loading patterns. The ability to adjust the controls of a machine or vehicle quickly and repeatedly to exact positions. Must successfully complete all company training and certification requirements regarding equipment usage, including obtaining McCoy's forklift certification. Education and Experience: A high school diploma or equivalent is preferred. Forklift operator certification. Successful completion of on-the-job training; completing levels 1 and 2 of the positional training offered. Physical Requirements: Prolonged periods of standing and moving around the yard and warehouse. Must be able to use the three point hold when getting into trucks and/or forklifts. Must be able to lift up to 80 pounds at times, occasionally lift/move up to 100 pounds, and push and/or pull 50 pound loads at a time. The ability to perform repetitive movements over long periods. May need to work overtime, nights, weekends, and holidays. Must be able to work in various types of weather. McCoy's is an equal opportunity employer. Equal access to programs, services and employment is available to all persons. Those applicants requiring reasonable accommodations in the application and/or interview process should contact a representative of the People Development Department at **************. EOE, AAP, D, F, VA

Job Title: Operator Company: Xccelerated Construction Unlimited LLC About Us: At Xccelerated Construction Unlimited (XCU), we specialize in innovative pipeline and infrastructure solutions for the oil and gas industry. Our team is dedicated to delivering exceptional results for our clients and ensuring safety and efficiency at every step. We believe in the strength of a hardworking team and are looking for committed individuals to join our team. Job Summary: We are looking for an experienced Equipment Operator to join our field team. This role involves operating heavy machinery such as D6 and D8 Dozers, Side Booms, Excavators, and Skid Steers in various pipeline construction and maintenance projects. The ideal candidate will have hands-on experience, a strong commitment to safety, and the ability to work effectively in a team environment. Key Responsibilities: Safely operate heavy equipment including D6 and D8 Dozers, Side Booms, Excavators, Fork Lift, Tag Welding Rig, and Skid Steers for pipeline construction and maintenance tasks. Perform daily inspections of equipment, including checking fluids, greasing parts, and ensuring equipment is in good working condition. Follow project plans, blueprints, and supervisor instructions to perform tasks such as trenching, grading, backfilling, and lifting. Maneuver equipment to safely load and unload materials or equipment at job sites. Maintain proper load securement and balance while transporting materials or equipment. Communicate effectively with team members, supervisors, and other operators to ensure smooth and safe operations. Work in various outdoor conditions, including hot, cold, and rainy weather. Conduct routine maintenance and minor repairs of equipment as needed. Adhere to all company and OSHA safety guidelines, participating in safety meetings and reporting any unsafe conditions or practices. Maintain daily logs, records, and equipment reports. Assist in general site preparation and cleanup tasks as required. Travel will be expected for this position. Qualifications: Previous experience in construction or related field is preferred but not required. Ability to lift and carry heavy materials (80 - 100.) for extended periods. Willingness to work outdoors in all weather conditions. Strong teamwork skills and a positive attitude. Basic understanding of construction & pipeline safety protocols. Valid driver's license. Reliable vehicle with current registration, external fuel cell, air compressor and grease gun. What We Offer: Competitive hourly wage with opportunities for overtime. Per Diem included for travel. Opportunity for growth and advancement within the company. Supportive team environment with a focus on safety and development. Hands-on training and skills development. Why Join XCU? At XCU, we pride ourselves on our commitment to our employees. We invest in training and career development because we believe that a well-supported team is key to our success. When you join XCU, you're not just joining a company-you're joining a family that values hard work, integrity, and exceptional results.

We have a direct hire opportunity in Hobbs, NM for a Field Operator The Field Operator is responsible for the proper and safe operation and maintenance of all pipelines, measurement facilities, compression facilities, and other associated equipment in an assigned area used to transport, treat, and store natural gas. DUTIES and RESPONSIBILITIES Essential and other important responsibilities and duties may include, but are not limited to, the following: Proper operation and maintenance of pipelines in accordance with company policies/procedures and applicable DOT regulations. E.g., gas measurement, TEG dehydrators, and natural gas compressors. Perform preventative maintenance. E.g., Pigging, sample collection, greasing valves, changing filters, and tightening loose connections, etc. Maintain adequate housekeeping at all locations and pipelines. Review equipment logs and gather information for readiness. Prepare daily, weekly, and monthly reports and communicate them to the Field Foreman. Perform minor equipment repair. Identify equipment issues and take appropriate action to correct. E.g., prepare and submit work orders for repairs by third-party vendors. Coordinate equipment maintenance and repair with third-party vendors. Effectively interact with third-party customers, vendors, regulatory personnel and the public to properly complete job duties. Actively participate in the Operator Qualification (OQ) Program. Ability to be on call 24-7 on a rotation with other coworkers.

We are committed to a policy of Equal Employment Opportunity and will not discriminate against an applicant or employee based on race, color, religion, national origin, sex, age, disability, veteran status, genetic information, marital status, or any other legally recognized protected status under federal, state, or local laws, regulations, or ordinances. Applicants with disabilities may be entitled to reasonable accommodation under the Americans with Disabilities Act or other laws. Please inform a personnel representative if you need accommodation to participate in the application process. We look to hire diverse talent and ensure that we treat you with respect and support throughout the interview process and if you join Steel Energy, we embrace diversity and strive to create conditions that provide everyone with an equal opportunity to thrive and be included in all workplace opportunities. MAIN FUNCTIONS: Under the direction of a Rig Manager, the Rig Operator organizes the rig crew (Floor Hands and Derrick Hands), conducts Job Safety Meetings, delegates the collection of materials and equipment needed to perform the contracted services, drives the Rig to the work site, operates the rig and equipment and directs the crew to set-up and prepare the rig for the tasks to be performed. Directs the assigned floor hands and derrick hands to safely perform the service tasks contracted by a client utilizing the equipment provided by the employer; documents services performed, the billable supplies used during the process and the time elapsed while performing the contracted services. The Rig Operator uses specialized equipment to guide instruments, tubing, and casing down holes. He must keep his working environment in a clean and organized fashion and is responsible for ensuring that all the equipment he uses is in proper working order. Operators' duties also include cleaning, fueling, repairing, and maintaining workover rig equipment to include greasing, changing oils and lubricants as needed and on a regularly scheduled basis. JOB RESPONSIBILITIES: * Available to work beyond the traditional 8-hour workday; available to work Saturdays, Sundays, and Holidays, to meet operational needs. Well services work is generally performed during daylight hours, Monday through Friday, occasionally on Saturday and or Sunday. Certain operations cannot, however, be completed during a single daylight period and must be continued without interruption, over several consecutive days. Such operations are referred to as "24-hour operations," and require two or more shifts, crews, to operate the rig. Able to work at heights up to or greater than 50 feet. * Dependability is imperative. Reporting for work at the prescribed location and time, dressed for deployment to work, is essential. Unauthorized absences will result in discipline up to and including employment termination. * Performing maintenance services and repairs on oil and gas wells as part of a three-to-five-person crew. * Lead the daily pre-job tailgate safety meetings and writing JHA's. * Inspecting and documenting all lift equipment on location including but not limited to derrick harness, lanyard, SRL's, chains and cables, drill line and sand line. * Lead the crew in the rigging up and rigging down of the workover Rig in a safe manner and performing/documenting post rig up inspections. * Pulling and laying down Rods, Tubing and Casing by operating the rig controls. * Guide and manage the rig crew daily. * Assist in training and mentoring SSE employees and floor hands as needed. * Assist Rig Manager in various tasks anywhere on the rig as directed by Rig Manager * Driving company vehicles such as the Crew pick-up truck and the Rig. * Workshop and SWS Yard maintenance and repair work as required. * Assist Steel Energy Services management personnel as required. * Prepare rig tickets correctly and in a timely fashion to include correct pricing on rig rates, re-billable items, manage hours for crew members daily. * Position the rig, raise, and lower the mast. Direct other crew members in rigging up guy-lines, various equipment, and tools; lift, remove, install, and operate wellhead, pumping units matting boards, tubing, rods, casing, rod strippers, polish rods, stripper heads and other production equipment in a manner consistent with safe operating procedures to perform the contracted services. EMPLOYMENT PREFERENCES: * High school Diploma, GED or equivalent * 1-2 years of Floor Hand experience * 1-2 years of Derrick hand experience * 1-2 years of Relief Operator experience * Advanced Problem solving and organizational skills. * Excellent customer service, interpersonal skills and verbal / written English communication skills. * Ability to multi-task and work in a fast-paced environment, run pipe Talley's, figure pipe weights, keep good pipe counts, know how to space out pumping units, run and pull ESP's, know pipe torques specifications, pick up and operate power swivel and principles of operating mud pumps. * Supervisory level of well control training * Class B CDL license to drive workover rig (not required-but encouraged) * Ability to bend, stoop, and lift objects of up to seventy-five pounds (75#) for extended periods of time. * Basic Computer skills * This position requires standing, walking, and sitting while working either indoors or outdoors. * Ability to pass company's pre-employment exam that also consists of a drug screen and physical. * Acceptable criminal history * Ability to read, write and speak English to the extent that they can understand verbal and written instructions as well as give verbal and written instructions in English; and the ability to use simple mathematical calculations using whole numbers, fractions, and decimals (addition, subtraction, division, and multiplication) to make job related calculations. The DOT Authority for this position is: Black Hawk Energy Services/Sun Well Services 118 84th Street W Williston, ND 58801