Packaging operator jobs in Forest Acres, SC

The TFE Operator will be responsible for machine operation. This would include troubleshooting, documentation, and quality of material. • High school diploma or equivalent • The ability to carry out oral and written instructions along with the ability to adapt to different situations • The ability to lift up to 50 lbs. repetitively; push/ pull approximately 11lbs., walk up and down stairs. • The employee must have the ability to perform inspection functions such as visual inspection to detect cosmetic defects and color differentiation of products. • Must have basic mathematical skills including addition subtraction, multiplication, division, fractions and decimals. Must be able to read and write legibly. • Attendance and punctuality are essential functions of this position. Any unscheduled absence or tardy will have a negative impact on our ability to meet our production objectives. • Physical aspects of the job are defined on the Physical Demands Analysis located in HR Must Meet WorkKeys/WIN Requirements (Level 3 for Reading & Level 4 for Math) • Install proper tooling, load, run and monitor extruder with minimum downtime. • Make pre-forms out of resin as specified on order card. • Measure and maintain correct wall thickness of tubing. • Operator only runs one machine. • Keep tooling and machines in good working condition. • Polish and straighten tooling on lathe. • Keep work area clean and free of debris. • Observe all safety rules and regulations. • Maintain good communications within the department.

The OPEX Leader is responsible for leading the implementation and advancement of the Stanadyne Production System (SPS) at the site level. This role will develop and execute a local lean roadmap to enhance operational efficiency, drive continuous improvement, and align with Stanadyne's Strategic Deployment objectives. The OPEX Leader will collaborate across departments to identify opportunities for productivity gains and sustainable process improvements. Key Responsibilities: Develop and execute the site-specific lean roadmap aligned with the Stanadyne Production System. Partner with the Senior Manager of OPEX to implement continuous improvement tools and methodologies (Kaizen, Lean, Six Sigma, etc.). Promote and embed the principles of SPS across the site through training, coaching, and engagement. Lead weekly Kaizen reviews and oversee the planning and implementation of lean initiatives. Ensure compliance and adoption of newly introduced lean practices; monitor process performance and define standards. Analyze and improve existing production processes to increase site efficiency and productivity. Collaborate with Production, Quality, and Planning departments to drive effective joint improvement projects. Support and participate in internal, PCA, and 6S audits; ensure compliance throughout the facility. Assist in the development of process documentation and visual management standards. Identify and implement methods to reduce waste and improve overall operational performance. Train and mentor Lean Facilitators; lead training modules on Lean principles, 5S, and auditing practices. Verify data accuracy for standard work and cycle times in internal systems. Provide support for corrective and preventive action measures. Required Qualifications: Proven experience in implementing Lean Manufacturing methodologies (6S, Kaizen, VSM, PDCA, Pull Systems, Visual Management). Lean Certification Strong background in APQP and plant layout design (CAD proficiency required). Excellent interpersonal, analytical, and communication skills across all levels of the organization. Ability to prioritize and manage multiple continuous improvement initiatives simultaneously. Experience in a manufacturing environment required, automotive industry preferred. Stanadyne is an equal opportunity employer and does not discriminate on the basis of race, religion, national origin, sex, gender, color, marital status, sexual orientation, disability, veteran status or any other protected class.

NORMAL DUTIES include the following: Monitors quality and specifications incoming stock for flute, size; score position, color, label, label direction, print, and print direction and condition. Monitors quality and specifications of plates and drawings. Mounts cutting dies, printing plates Pulls rolls per the factory order. Sets side gates, belts, stacker attachments per factory order Places machine in time. Sets caliper for board and printing plate(s). Maintains information in the computer system in a timely manner. Makes adjustment needed to ensure product being produced meets all quality standards. Reports any inability to meet quality standards or setup standards to machine center Reports any maintenance problems to the machine center supervisor and assist as needed in repair of machine center. Prepares for next order while monitoring current production, as time will allow. Performs quality checks on product before and during production to ensure quality standards are met and maintained during production. The Operator will also perform any other duties as assigned. QUALIFICATION REQUIREMENTS: To perform this job successfully, an individual must have demonstrated the ability to perform each normal duty satisfactory in this and all lower classifications in this line of progression. The requirements listed below are representative of the knowledge, skill, and/or ability required. EDUCATION and/or EXPERIENCE: High School diploma or general education degree (GED); or five years related experience and/or training; or equivalent combination of education and experience. LANGUAGE SKILLS: Ability to read and interpret written documents such as safety rules, operating and maintenance instructions, factory orders, and procedure manuals. Ability to write routine reports and correspondence. Ability to communicate effectively. MATHEMATICAL SKILLS: Ability to add, subtract, multiply, and divide in all units of measure (English and Metric systems), using whole numbers, common fractions, and decimals. Ability to read an English and metric system tape measure. REASONING ABILITY: Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization may exist. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. PHYSICAL DEMANDS: The physical demands described here are representatives of those that must be met by an employee to successfully perform normal job functions. While performing the duties of this job, an individual is regularly required to stand; use hands to finger, handle, or feel objects, tools, or controls; reach with hands and arms; talk or hear; and taste or smell. An individual frequently is required to stoop, kneel, crouch, or crawl. An individual must regularly lift and/or move up to ten pounds, frequently lift and/or move up to twenty-five pounds, and occasionally lift and/or move up to fifty pounds. Specific vision abilities required by this job include close vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an individual encounters while performing the normal job functions. Reasonable accommodations may be made to enable individuals with disabilities to perform the normal job functions. While performing the duties of this job, an individual regularly works near moving mechanical parts. The employee is occasionally exposed to wet and/or humid conditions and temperature variations. The noise level in the work environment is usually moderate. Reasonable accommodations may be made to enable individuals with disabilities to perform the normal job functions. THESE RESPONSIBILITIES AND DUTIES ARE NOT INTENDED TO BE ALL-INCLUSIVE. RESPONSIBILITIES AND DUTIES MAY BE ADDED OR DELETED AS NECESSARY.

The Machine Operator is responsible for programming, setting up, and operating a computer numerical control (CNC) machine while maintaining high quality and safety standards. Primary Responsibilities Read drawings Program CNC machine Estimate structural weights Read and use structural shapes charts Use layout and multing techniques to maximize material yields Take initiative and assist in the resolution of production problems Monitor performance, check output quality, and make adjustments as needed to maintain consistent production All other duties as assigned Qualifications and Requirements Knowledge of Robot Machine Certified crane operator (complex) Understand production processes Ability to perform numerical conversions (i.e., decimals to fractions) Good verbal communication skills Good technical skills Detail oriented Bending, lifting, twisting, and standing required to perform job duties Education High school diploma

Job Description NORMAL DUTIES include may include the following: Monitors quality and specifications incoming stock for flute, size; score position, color, label, label direction, print, and print direction and condition. Monitors quality and specifications of plates and drawings. Monitors and adjusts the pH and viscosity of the ink used for each job. Mounts cutting dies, printing plates Pulls rolls per the factory order. Sets side gates, belts, stacker attachments per factory order Places machine in time. Sets caliper for board and printing plate(s). Maintains information in the computer system in a timely manner. Makes adjustment needed to ensure product being produced meets all quality standards. Reports any inability to meet quality standards or setup standards to machine center Reports any maintenance problems to the machine center supervisor and assist as needed in repair of machine center. Prepares for next order while monitoring current production, as time will allow. Performs quality checks on product after and during production to ensure quality standards are met and maintained during production. Must be able to operate sit down forklift. The Assistant Operator will also perform any other duties as assigned. QUALIFICATION REQUIREMENTS: The requirements listed below are representative of the knowledge, skill, and/or ability required. EDUCATION and/or EXPERIENCE: High School diploma or general education degree (GED); or five years related experience and/or training; or equivalent combination of education and experience. LANGUAGE SKILLS: Ability to read and interpret written documents such as safety rules, operating and maintenance instructions, factory orders, and procedure manuals. Ability to write routine reports and correspondence. Ability to communicate effectively. MATHEMATICAL SKILLS: Ability to add, subtract, multiply, and divide in all units of measure (English and Metric systems), using whole numbers, common fractions, and decimals. Ability to read an English and metric system tape measure. REASONING ABILITY: Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization may exist. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. PHYSICAL DEMANDS: The physical demands described here are representatives of those that must be met by an employee to successfully perform normal job functions. While performing the duties of this job, an individual is regularly required to stand; use hands to finger, handle, or feel objects, tools, or controls; reach with hands and arms; talk or hear; and taste or smell. An individual frequently is required to stoop, kneel, crouch, or crawl. An individual must regularly lift and/or move up to ten pounds, frequently lift and/or move up to twenty-five pounds, and occasionally lift and/or move up to fifty pounds. Specific vision abilities required by this job include close vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an individual encounters while performing the normal job functions. Reasonable accommodations may be made to enable individuals with disabilities to perform the normal job functions. While performing the duties of this job, an individual regularly works near moving mechanical parts. The employee is occasionally exposed to wet and/or humid conditions and temperature variations. The noise level in the work environment is usually moderate. Reasonable accommodations may be made to enable individuals with disabilities to perform the normal job functions.

Your Job Georgia-Pacific, Building Products, is seeking Production Operators for our plywood mills in Prosperity, SC. If you thrive in a team environment, then this may be the job for you! Successful candidates must be able to work any hours, to include a variety of shifts, weekends, holidays, and overtime as needed. Starting wages are $20/ hour!! Shift differential $2/ hour. This is an night shift opportunity working 12 hour shifts. Our Team Georgia-Pacific in Prosperity, SC manufactures pine plywood panels, siding, and lumber that is ideal for residential and light commercial construction. GP employees strive for safety and health excellence while achieving an injury free workplace. To learn more about our Building Products division, visit**************** Our Georgia-Pacific Prosperity, SC facility is a Tobacco Free Workplace. What You Will Do Assist in clean up, operation, and maintenance of production equipment; including but not limited to: machine operation, and forklift operation Adhere to all plant safety and environmental guidelines, policies and procedures while proactively seeking out potential safety hazards, including wearing safety equipment Perform tasks such as lifting (50lbs), walking, climbing, stooping, standing, pushing and/or pulling for up to 12 hours/day in a loud/noisy, hot, humid, dusty, greasy and high-volume environment Use a computer or tablet Work in a non-climate controlled mill, with temperatures that can be higher in the summer and lower in the winter Read and comprehend written instructions as required to complete assigned tasks Work as a team to meet safety, production, and quality goals Work cooperatively and productively with supervisors, co-workers, and other associates to complete tasks Troubleshoot problems with proven results that make a positive impact to the business Who You Are (Basic Qualifications) E xperience in a manufacturing, agricultural, warehouse OR military environment OR completion of post high school education in manufacturing/industrial What Will Put You Ahead Two (2) years or more of experience in a manufacturing, military, industrial, farming, agriculture, landscaping, carpentry, mechanical, or construction environment Experience driving and operating a forklift Experience working in wood products Hiring Philosophy All Koch companies value diversity of thought, perspectives, aptitudes, experiences, and backgrounds. We are Military Ready and Second Chance employers. Learn more about our hiring philosophy here . Who We Are As a Koch company and a leading manufacturer of bath tissue, paper towels, paper-based packaging, cellulose, specialty fibers, building products and much more, Georgia-Pacific works to meet evolving needs of customers worldwide with quality products. In addition to the products we make, we operate one of the largest recycling businesses. Our more than 30,000 employees in over 150 locations are empowered to innovate every day - to make everyday products even better. At Koch, employees are empowered to do what they do best to make life better. Learn how our business philosophy helps employees unleash their potential while creating value for themselves and the company. Our Benefits Our goal is for each employee, and their families, to live fulfilling and healthy lives. We provide essential resources and support to build and maintain physical, financial, and emotional strength - focusing on overall wellbeing so you can focus on what matters most. Our benefits plan includes - medical, dental, vision, flexible spending and health savings accounts, life insurance, ADD, disability, retirement, paid vacation/time off, educational assistance, and may also include infertility assistance, paid parental leave and adoption assistance. Specific eligibility criteria is set by the applicable Summary Plan Description, policy or guideline and benefits may vary by geographic region. If you have questions on what benefits apply to you, please speak to your recruiter. Additionally, everyone has individual work and personal needs. We seek to enable the best work environment that helps you and the business work together to produce superior results. Equal Opportunities Equal Opportunity Employer, including disability and protected veteran status. Except where prohibited by state law, some offers of employment are conditioned upon successfully passing a drug test. This employer uses E-Verify. Please click here for additional information. (For Illinois E-Verify information click here , aquí , or tu ).

Job Description Machine Operator - Entry Level (Sheet Metal Fabrication Shop) Walker White Mechanical - Columbia, SC Full-Time | Competitive Pay + Benefits | Training Provided About Us Walker White Mechanical is a trusted leader in HVAC, plumbing, and sheet metal fabrication, serving commercial and industrial clients across South Carolina. We take pride in craftsmanship, customer service, and delivering high-quality mechanical solutions. As our fabrication shop continues to grow, we're looking for a motivated Entry-Level Machine Operator to join our team. Position Summary This is an excellent opportunity for someone who enjoys hands-on work, wants to develop technical skills, and is eager to be part of a team that fabricates components used on major mechanical projects. No prior experience is required-just a strong work ethic, willingness to learn, and attention to detail. Responsibilities Operate and assist with setup of fabrication machinery, including shears, brakes, and plasma tables Measure, cut, and form sheet metal according to shop drawings and specifications Read and interpret basic blueprints or drawings Perform quality checks to ensure accuracy and consistency of fabricated parts Maintain a clean, organized, and safe work environment Assist with loading, unloading, and material handling as needed Qualifications Mechanical aptitude and eagerness to learn new skills Ability to read a tape measure and perform basic math Dependable attendance and strong work ethic Previous fabrication or manufacturing experience is helpful but not required-we will train the right candidate Why Join Walker White Mechanical? Competitive pay and a full benefits package Training and advancement opportunities within the shop and company Stable, full-time employment with long-term career potential Clean, safe, and team-oriented work environment How to Apply If you're ready to start a career in sheet metal fabrication and grow with a respected mechanical contractor, apply today!

Mark Anthony Group is an entrepreneurial drinks company, built from the ground up by thinking differently, innovating and doing the unexpected. Our company is rooted in family values, a bold vision and relentless determination to continuously raise the bar and make a positive difference in consumers' lives. Founded in 1972, we've grown organically from a one-person import wine business into an international drinks company whose hallmarks include a portfolio of luxury wineries and iconic beverage brands, including White Claw Hard Seltzer, Mike's Hard Lemonade, Cayman Jack and Más+ by Messi. Role Purpose: Mark Anthony Brewing Inc. is hiring a PACKAGING OPERATOR responsible for monitoring process equipment, basic troubleshooting of any unforeseen process events, and ensuring that Safety and Quality are at the forefront of all activities. The PACKAGING OPERATOR will be cross trained in multiple areas and will be qualified to complete tasks in the various areas of packaging, sanitation, quality, and maintenance. Accountabilities & Impact: * Ensure continuous operation of process equipment through active process monitoring and troubleshooting. * Effectively communicate job knowledge and process changes with team members and management thru various forms of daily communication (shift handover meeting, daily production meetings, email, action logs, work orders, etc). * Perform quality inspection of product using basic lab equipment and SOPs as a guide. * Complete and maintain written documentation certifying completion of inventory checks, quality inspections, sanitation requirements, batch and blending production following SOP's, and basic maintenance tasks. * Maintain sanitation and lubrication of machinery, equipment, storage bins, workstations, etc. * Report safety and/or equipment issues to leadership. Skills & Experiences Needed: * High School diploma or equivalent required. * 1+ years of manufacturing experience. * Demonstrated experience using computers and software skills such as MS office. * Must be at least 21 years of age Working conditions: * Fast-paced and constantly changing work environment * Shift work including days, evenings, overnight shifts, and up to 12 hrs. * Overtime including weekends and holidays as needed * Ability to lift 50 lbs. * Ability to stand/move up to 8-12 hours per day. * Ability to ascend/descend stairs throughout shift. * Must wear Personal Protective Equipment (PPE) including (but not limited to) bump cap, safety steel toe shoes and safety glasses. * Must adhere to Good Manufacturing Practices (GMPs). At Mark Anthony, we exist to Unearth the Extraordinary: Our Purpose is not just a statement; it is a call to action that binds us together and ignites our passion for making a difference. It is the driving force behind why we do what we do every single day, connecting our global organization across all business units, roles, and locations. We are: Best in Our Craft We set the standard with a pursuit of excellence that can be found in everything from our products and processes to our plants and people. Ambitiously Curious We stay curious, dreaming big and navigating the unknown with an enduring belief in better. Made With Humility We bring humility, authenticity, fun, and support to every collaboration and celebrate wins as a team. Daringly Disruptive We disrupt the status quo, moving fast to seize opportunities and acting scrappy to stay ahead of industry giants.

Job DescriptionMachine Operator / Assembler - Multiple Shifts - Newberry, SC GPS is hiring for immediate Machine Operator and Assembler positions across multiple shifts in Newberry, SC. Why Apply? and shift) • Long-term position with potential for hire • On-the-job training and advancement opportunities • Exceptional benefits package after hire, including: - Medical, 401(k), 32 personal leave hours - Quarterly attendance bonus, referral bonus, birthday canteen bucks Available Shifts: • Day Shift (Mon-Thu, 6 AM-6 PM) • Night Shift (Mon-Thu, 6 PM-6 AM) • Weekend Shift (Fri-Sun, 6 AM-6 PM) What You'll Do: • Set up and operate machines and/or perform assembly tasks • Load materials, install tooling, and cut, label, and package parts • Inspect parts for quality and troubleshoot operational issues • Follow safety guidelines and maintain a clean work area • Perform repetitive tasks and lift up to 50 lbs What You Need: • Stable work history with verifiable references • 1 year of machine operation or general labor experience preferred • Ability to use and read a tape measure and perform basic math • Physical stamina to stand, lift, stretch, and bend • Reliable attendance and punctuality A drug-free workplace and a criminal background check are required. EOE

Job Title: Polymerization Operator Employment Type: Full-Time Pay: Starting from $20.50 per hour Expected Hours: 36 48 hours per week Job Summary: We are seeking a highly motivated individual to join our team as a Polymerization Operator. This position is responsible for performing assigned tasks in the production of materials on various lines, ensuring quality products and a safe, cost-effective operation while working with minimal supervision. Key Responsibilities: Execute tasks required in the production of materials on Line A and B Systems to support production needs. Ensure compliance with safety protocols while performing all tasks in a timely manner. Monitor utilities (HTM, cooling water, steam system, air, chilled water, and demineralized water) and record necessary information. Ensure proper sampling, labeling, and packaging of finished products. Load feedstock as required (e.g., acid vessels, dissolvers). Make corrective adjustments to equipment and utilities as directed by the shift supervisor to maintain process conditions. Monitor and document all process conditions as required. Maintain a safe and clean work environment. Education and Experience: High School diploma or equivalent required. Mechanical aptitude and general knowledge of hand tools. Ability to grasp and retain instructions effectively. Strong communication skills to interact with operators and supervisors. Physical Requirements & Work Environment: Ability to work rotating swing shifts. Must be able to lift and carry up to 20 kg repetitively. Comfortable climbing and descending ladders and steps. No fear of heights or confined spaces. Routine safety equipment required: long sleeves, respirator, safety shoes, hearing protection, safety glasses. Benefits: Competitive compensation package, including: 401(k) with 6% match Dental and health insurance Employee assistance program Flexible spending account Health savings account Life insurance Paid time off Retirement plan Tuition reimbursement Vision insurance If you are interested in joining our team and contributing to our mission, please apply today!

Full-time Description The Machine Operator will read blueprints, make adjustments, set stops or guides, and look for defects in parts while operating a metal saw, poly saw, or shear. The Stamping Operator will produce stamped parts by operating a stamping press; maintaining quality and safety standards; and keeping records. Supervisory Responsibilities: None. Duties/Responsibilities: Starts, stops, and sets up machines in a safe manner. Operates the machine, keeping an eye out for any defects or issues. Uses measurement tools to ensure accuracy. Completes quality checks to verify condition of material. Verifies type of material before cutting. Changes blades, cleans sensors, replenishes coolant, and calibrates machines. Operates forklift and crane. Helps pack and transport finished pieces as needed. Accurately completes paperwork. Maintains 6S (sort, set, shine, standardize, sustain, safety) standards in all work stations. Completes other duties as assigned by supervisor. Skills: Knowledge of blueprint reading. Organizational skills and attention to detail. Time management skills with a proven ability to meet deadlines. Basic math skills (ex. addition, subtraction, multiplication, converting fractions to decimals, converting standard measurements to metric system, etc.). Basic computer skills. Mechanical inclination. Abilities: Read a tape measure and other measurement tools. Must have prior industrial machine operator experience. Function well in a high-paced and at times stressful environment. Work well with others on a team. Follow instructions and processes. Solve problems quickly and efficiently. Flexibility. Willingness to be trained by supervisor. Ability to multitask. Willingness to have performance measured daily. Preferred Education and Experience: High school diploma or equivalent. Forklift certification. Physical Requirements: Uncontrolled environmental conditions: noise, dust, dirt, and mobile equipment. Routine, repetitive lifting up to 35 lbs., occasional, heavy lifting, and pushing / pulling 10 lbs. regularly, 1 to 10 hours per day. Any combination of standing, bending, climbing, balancing, kneeling, crouching, reaching, handling, feeling, and walking 8 to 10 hours per day. Ability to work up to 8-10 hour shifts and overtime as required by the work. Use of all limbs, dexterous and steady use of hands and arms for long periods of time. Simultaneous mental and muscular coordination, visual and audio awareness of surrounding area. Note: This position may require working with fiberglass, which can be itchy to some. Monti, Inc. is proud to be an Equal Opportunity Employer.

Job DescriptionNow Hiring: Amada Brake Press Operator - 2nd Shift (Cope, SC) We're looking for a skilled Amada Brake Press Operator to join our growing team in Cope, SC! This is a great opportunity for an experienced operator who takes pride in precision work and reliability.Shift & Pay: 2nd Shift: Monday-Friday, 4:00 PM - 2:30 AM Pay: $15-$17 per hour, depending on experience Requirements: Minimum 2+ years of recent Brake Press operating experience (Amada preferred) Ability to read blueprints, make offset adjustments, and set up tooling Must be able to lift 50+ lbs repeatedly Punctual, dependable, and detail-oriented Steel-toed shoes and reliable transportation required Must be able to interview immediately - interview will include a hands-on skills test To Apply: Please submit a current, up-to-date resume that clearly reflects your relevant experience. Applicants without an updated resume will not be considered.We look forward to connecting with motivated, hardworking professionals ready to take the next step in their career!

Job DescriptionOnly applications with a resume attachment will be considered for employment. Responsible for preparation, set-up, start-up and operation of manufacturing equipment. Responsibilities also include ensuring that jobs meet quality specifications, manufacturing standards and ensuring that safety procedures are followed while working to continuously improve quality and productivity of manufacturing operations. Essential Duties & Functions Set-up, operate and troubleshoot equipment to produce parts to specification Ensure maximum efficiency of set-up to include set-up time, materials, production rate and material consumption Machine readiness -- inspect machinery, equipment and tooling prior to set-up Identify issues that adversely affect product requirements and communicate with appropriate department personnel for resolution Perform routine maintenance and cleaning Identify nonconforming materials/products and work with shift leader for resolution Ensure parts produced meet established quality standards Perform housekeeping duties Follow Good Manufacturing Practices Complete all shift documentation/paperwork Shift hand-off -- review job status' and provide updates to incoming shift React with urgency to equipment downtime or other extraordinary conditions, and notify supervision whenever such conditions occur Skills/Qualifications Must possess basic skills to setup, load and unload material from manual and automated equipment with little supervision. Must possess basic computer skills, data entry skills and the ability to operate and load simple computer programs to run manufacturing equipment and machines Ability to operate with speed and accuracy, and collaborate effectively with others on the team Demonstrate the ability to work in a dynamic and fast-paced work environment Requires strong communication, interpersonal, business, technical, analytical, and planning skills Displays leadership competencies, including ability to delegate, engage, and inspire others Able to coach, and train line production workers to optimize production Must have the ability to expedite solutions when situations arise Has knowledge of commonly used concepts, practices, and procedures within a particular field Physical Demands While performing the duties of this job, the employee is occasionally required to stand; walk; sit; use hands to finger, handle, or feel objects, tools or controls

The TFE Operator will be responsible for machine operation. This would include troubleshooting, documentation, and quality of material.

NORMAL DUTIES include may include the following: Monitors quality and specifications incoming stock for flute, size; score position, color, label, label direction, print, and print direction and condition. Monitors quality and specifications of plates and drawings. Monitors and adjusts the pH and viscosity of the ink used for each job. Mounts cutting dies, printing plates Pulls rolls per the factory order. Sets side gates, belts, stacker attachments per factory order Places machine in time. Sets caliper for board and printing plate(s). Maintains information in the computer system in a timely manner. Makes adjustment needed to ensure product being produced meets all quality standards. Reports any inability to meet quality standards or setup standards to machine center Reports any maintenance problems to the machine center supervisor and assist as needed in repair of machine center. Prepares for next order while monitoring current production, as time will allow. Performs quality checks on product before and during production to ensure quality standards are met and maintained during production. Must be able to operate sit down forklift. The Assistant Operator will also perform any other duties as assigned. QUALIFICATION REQUIREMENTS: The requirements listed below are representative of the knowledge, skill, and/or ability required. EDUCATION and/or EXPERIENCE: High School diploma or general education degree (GED); or five years related experience and/or training; or equivalent combination of education and experience. LANGUAGE SKILLS: Ability to read and interpret written documents such as safety rules, operating and maintenance instructions, factory orders, and procedure manuals. Ability to write routine reports and correspondence. Ability to communicate effectively. MATHEMATICAL SKILLS: Ability to add, subtract, multiply, and divide in all units of measure (English and Metric systems), using whole numbers, common fractions, and decimals. Ability to read an English and metric system tape measure. REASONING ABILITY: Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization may exist. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. PHYSICAL DEMANDS: The physical demands described here are representatives of those that must be met by an employee to successfully perform normal job functions. While performing the duties of this job, an individual is regularly required to stand; use hands to finger, handle, or feel objects, tools, or controls; reach with hands and arms; talk or hear; and taste or smell. An individual frequently is required to stoop, kneel, crouch, or crawl. An individual must regularly lift and/or move up to ten pounds, frequently lift and/or move up to twenty-five pounds, and occasionally lift and/or move up to fifty pounds. Specific vision abilities required by this job include close vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an individual encounters while performing the normal job functions. Reasonable accommodations may be made to enable individuals with disabilities to perform the normal job functions. While performing the duties of this job, an individual regularly works near moving mechanical parts. The employee is occasionally exposed to wet and/or humid conditions and temperature variations. The noise level in the work environment is usually moderate. Reasonable accommodations may be made to enable individuals with disabilities to perform the normal job functions.

Manufacturing Associate Assembles a variety of engine components according to a quality control plan and work instructions in a fast paced, repetitive manufacturing environment. We are looking for someone who demonstrates: Passionate customer focus Thoughtful, fast, disciplined execution A commitment to continuous improvement A relentless drive to succeed Here is a glimpse of what you'll do: Assembly of engine components Check and verify quality components Housekeeping in assigned work area and entire plant Create and follow assembly work instructions and control plans Use problem solving techniques to understand and solve variation Responsible to meet hourly/daily production requirements Responsible for continuous process improvements, utilizing lean tools Here is some of what you'll need (required): Must be able to read, write, and speak English fluently. 1-3 years of Assembly or Manufacturing Experience Ability to manage multi-tasks effectively Works well with established systems. Must be willing to rotate or work off-shifts Can read and interpret complex work instructions and control plans Ability to locate information and take appropriate actions Ability to observe work process flow and identify and resolve problems Ability to work in a self-directed team environment Here are the hours for our 2nd and 3rd Shifts: This is a full-time position, and hours of work and days are Monday through Friday, 8 hour shifts; 2nd shift 2pm-10pm or 3rd shift 10pm-6:00am. Overtime is required at times based on customer demands. Preferred Experience: Experience working with tight tolerances (1-10 micron) Quality training Experience in machining/assembling/testing components Experience with Statistical Process Control (SPC) Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Work is performed in a production environment and requires standing for prolonged periods of time, using dexterity of arms, hand and fingers. Essential functions may require maintaining physical condition necessary for standing, walking, reaching, and use of required safety protective equipment. Work may require performance of medium lifting of objects and materials up to fifty (50) pounds and specific vision abilities, including close vision, color vision, and depth perception. Job may involve exposure to electrical and mechanical hazards, moving mechanical parts, vibrations, and moderate levels of noise. We are dedicated to rewarding our talent with a competitive compensation and benefits package. Here are a few examples of what you'll get for the great work you provide: Exceptional medical, dental, and vision available day 1. 401(k) Paid time off, including holidays Life and disability insurance Pay rate will depend on experience, qualifications and shift

Job Description NORMAL DUTIES include the following: Monitors quality and specifications incoming stock for flute, size; score position, color, label, label direction, print, and print direction and condition. Monitors quality and specifications of plates and drawings. Mounts cutting dies, printing plates Pulls rolls per the factory order. Sets side gates, belts, stacker attachments per factory order Places machine in time. Sets caliper for board and printing plate(s). Maintains information in the computer system in a timely manner. Makes adjustment needed to ensure product being produced meets all quality standards. Reports any inability to meet quality standards or setup standards to machine center Reports any maintenance problems to the machine center supervisor and assist as needed in repair of machine center. Prepares for next order while monitoring current production, as time will allow. Performs quality checks on product after and during production to ensure quality standards are met and maintained during production. The Operator will also perform any other duties as assigned. QUALIFICATION REQUIREMENTS: To perform this job successfully, an individual must have demonstrated the ability to perform each normal duty satisfactory in this and all lower classifications in this line of progression. The requirements listed below are representative of the knowledge, skill, and/or ability required. EDUCATION and/or EXPERIENCE: High School diploma or general education degree (GED); or five years related experience and/or training; or equivalent combination of education and experience. LANGUAGE SKILLS: Ability to read and interpret written documents such as safety rules, operating and maintenance instructions, factory orders, and procedure manuals. Ability to write routine reports and correspondence. Ability to communicate effectively. MATHEMATICAL SKILLS: Ability to add, subtract, multiply, and divide in all units of measure (English and Metric systems), using whole numbers, common fractions, and decimals. Ability to read an English and metric system tape measure. REASONING ABILITY: Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization may exist. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. PHYSICAL DEMANDS: The physical demands described here are representatives of those that must be met by an employee to successfully perform normal job functions. While performing the duties of this job, an individual is regularly required to stand; use hands to finger, handle, or feel objects, tools, or controls; reach with hands and arms; talk or hear; and taste or smell. An individual frequently is required to stoop, kneel, crouch, or crawl. An individual must regularly lift and/or move up to ten pounds, frequently lift and/or move up to twenty-five pounds, and occasionally lift and/or move up to fifty pounds. Specific vision abilities required by this job include close vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an individual encounters while performing the normal job functions. Reasonable accommodations may be made to enable individuals with disabilities to perform the normal job functions. While performing the duties of this job, an individual regularly works near moving mechanical parts. The employee is occasionally exposed to wet and/or humid conditions and temperature variations. The noise level in the work environment is usually moderate. Reasonable accommodations may be made to enable individuals with disabilities to perform the normal job functions. THESE RESPONSIBILITIES AND DUTIES ARE NOT INTENDED TO BE ALL-INCLUSIVE. RESPONSIBILITIES AND DUTIES MAY BE ADDED OR DELETED AS NECESSARY.

Job DescriptionGPS is hiring Machine Operators for immediate openings in Williston, SC! About our client: A stable company with 55+ years of experience in producing high-quality rubber and plastic foam materials. Why you should apply: Monday-Thursday, 7:00 AM-5:30 PM (first shift) $16/hr with overtime opportunities Preventive MEC Plan or a 80/20 Medical Plan after hire Paid Holidays, Paid Vacation, Sick Time after hire 401(k) with company match up to 4% after hire What you will do: Operate and maintain machinery, including press machines, when assigned Inspect products for quality and accuracy Complete production documentation and follow safety procedures What you will need: Entry-level welcome; manufacturing or machine experience a plus Lift up to 50 lbs. and stand for long periods Comfortable in hot, non-climate-controlled environments Steel-toe shoes required (company provides safety glasses, gloves, etc.) HS Diploma or GED preferred but not required GPS is a drug-free workplace; a criminal background check is required. EOE

Full-time Description The Machine Operator will read blueprints, make adjustments, set stops or guides, and look for defects in parts while operating a metal saw, poly saw, or shear. The Stamping Operator will produce stamped parts by operating a stamping press; maintaining quality and safety standards; and keeping records. Supervisory Responsibilities: None. Duties/Responsibilities: Starts, stops, and sets up machines in a safe manner. Operates the machine, keeping an eye out for any defects or issues. Uses measurement tools to ensure accuracy. Completes quality checks to verify condition of material. Verifies type of material before cutting. Changes blades, cleans sensors, replenishes coolant, and calibrates machines. Operates forklift and crane. Helps pack and transport finished pieces as needed. Accurately completes paperwork. Maintains 6S (sort, set, shine, standardize, sustain, safety) standards in all work stations. Completes other duties as assigned by supervisor. Skills: Knowledge of blueprint reading. Organizational skills and attention to detail. Time management skills with a proven ability to meet deadlines. Basic math skills (ex. addition, subtraction, multiplication, converting fractions to decimals, converting standard measurements to metric system, etc.). Basic computer skills. Mechanical inclination. Abilities: Read a tape measure and other measurement tools. Must have prior industrial machine operator experience. Function well in a high-paced and at times stressful environment. Work well with others on a team. Follow instructions and processes. Solve problems quickly and efficiently. Flexibility. Willingness to be trained by supervisor. Ability to multitask. Willingness to have performance measured daily. Preferred Education and Experience: High school diploma or equivalent. Forklift certification. Physical Requirements: Uncontrolled environmental conditions: noise, dust, dirt, and mobile equipment. Routine, repetitive lifting up to 35 lbs., occasional, heavy lifting, and pushing / pulling 10 lbs. regularly, 1 to 10 hours per day. Any combination of standing, bending, climbing, balancing, kneeling, crouching, reaching, handling, feeling, and walking 8 to 10 hours per day. Ability to work up to 8-10 hour shifts and overtime as required by the work. Use of all limbs, dexterous and steady use of hands and arms for long periods of time. Simultaneous mental and muscular coordination, visual and audio awareness of surrounding area. Note: This position may require working with fiberglass, which can be itchy to some. Monti, Inc. is proud to be an Equal Opportunity Employer.