Precision Castparts jobs in Bedford Heights, OH - 314 jobs

Company Profile With more than 120 operations and approximately 20,000 employees worldwide, Precision Castparts Corp. is the market leader in manufacturing large, complex structural investment castings, airfoil castings, forged components, aerostructures and highly engineered, critical fasteners for aerospace applications. In addition, we are the leading producer of airfoil castings for the industrial gas turbine market. We also manufacture extruded seamless pipe, fittings, and forgings for power generation and oil & gas applications; commercial and military airframe aerostructures; and metal alloys and other materials for the casting and forging industries. With such critical applications, we insist on quality and dependability - not just in the materials and products we make, but in the people we recruit. PCC is relentless in its dedication to being a high-quality, low-cost and on-time producer; delivering the highest value to its customers while continually pursuing strategic, profitable growth. In 2016, Berkshire Hathaway, led by Chairman and CEO Warren E. Buffett, acquired Precision Castparts Corp. Monday-Friday 6:00am-2:00pm Job Description Responsible for visual inspection of wax pattern and dressing of defects, and other various tasks related to pattern manufacturing. Responsibilities: * Visually inspects wax patterns to ensure customer requirements are met * Dress defects using hot torches and hot plates; trims flash; fixes air bubbles; label patterns; assembles parts; applies sealant; keeps work area clean. * Accurately report daily production quantities Physical and Mental Demands: * Job is performed at a work bench where you have the option to sit or stand. Work requires attention to detail, steady hands, good visual acuity. * Constant use of both upper extremities to inspect, dress, repair, label and seal wax patterns. Frequent use of hand tools; reach / handle activities at waist, knee, shoulder, overhead. * Push/lift 10-35 lbs All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. This position requires use of information or access to production processes subject to national security controls under U.S. export control laws and regulations (including, but not limited to the International Traffic in Arms Regulations (ITAR) and the Export Administration Regulations (EAR)). To comply with those regulations, this position may require applicants to be U.S. Persons (i.e., U.S. citizens, U.S. lawful permanent residents, protected individuals as defined by 8 U.S.C. 1324b(a)(3)), or eligible to obtain the required export authorizations from the U.S. Department of State or the U.S. Department of Commerce. Precision Castparts Corp. and its affiliates do not accept unsolicited resumes from search firms or employment agencies. Unsolicited resumes will become the property of Precision Castparts Corp & its affiliates, and no fee will be paid.

Reporting to the President of Energy Services and Solutions Group, the Vice President of Operations will lead Manufacturing, Continuous Improvement, and Industry 4.0 Initiatives. You will develop and execute short and long-term plans to achieve the key operational objectives and annual profit plan for the business, impacting nearly $4.6B revenue. You will have the opportunity to lead 5 divisions including 15 manufacturing plants cross the US and Mexico with a focus on business growth, technological transformation, and delivering an exceptional customer experience. Essential Functions: * Develop and lead initiatives in alignment with the strategic plan and annual profit plan objectives to drive operational performance and financial results. * Establish objectives and track key performance indicators across the organization. Ensure prompt and accurate reporting systems on all aspects of operations, leveraging EPM and Balanced Score Card. * Drive the manufacturing strategy for the Group and divisions optimizing capacity utilization through footprint strategy for sites and key manufacturing technologies * Proactively champion Operations focused on Environmental, Health & Safety (EHS), driving a zero-incident culture. * Lead and support implementation of the Operating for Growth (O4G) transformation for the Manufacturing/OPEX workstream. Partner cross functionally with transformation teams to support Group sites evolving to cost centers * Create a culture of exceeding customer expectations, ensuring that the organization is highly responsive to customer needs and issues. * Continuously improve operations through alignment with the Eaton Business System with a strong focus on driving a Lean Culture, drive technology enablement and I-4.0 strategy, implementation, and execution. * Drive change through improved organizational capability, ensuring motivation and retention of a high-performance management team and workforce. * Demonstrate a leadership style that perpetuates the Eaton Leadership Model and the Eaton Code of Ethics. Qualifications and Experience * Bachelor's degree required; MBA preferred. * 15+ years' experience with progressive levels of responsibility in Manufacturing, Supply Chain, OPEX for a global manufacturing leader in a similar scope/scale role. * Plant manager and multi-site management experience * Demonstrated success in driving zero incident culture, with employee ownership of EHS. * Knowledge and experience with multiple ERPs and conversions preferred. * Proven track record in building high performance teams, leading cross-functionally, developing and retaining employees, and driving organizational change. * Knowledge of current technologies in manufacturing (assembly and fabrication), engineering, materials management/inventory control, distribution and logistics, purchasing, quality assurance systems processes and practices. * Strong financial and business acumen; prior profit and loss responsibility required. * Track record of successful leadership, performance results, organizational development, and operational improvement. The expected annual salary range for this role is $236,997.00 - $ 347,595.60 a year. This position is also eligible for a variable compensation compenent. Please note the salary information shown above is a general guideline only. Salaries are based upon candidate skills, experience, and qualifications, as well as market and business considerations. The application window for this position is anticipated to close on 8/13/2026. We are committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job-related reasons regardless of an applicant's race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, marital status, genetic information, protected veteran status, or any other status protected by law. Eaton believes in second chance employment. Qualified applicants with arrest or conviction history will be considered regardless of their arrest or conviction history, consistent with the Los Angeles County Fair Chance Ordinance, the California Fair Chance Act and other local laws. You do not need to disclose your conviction history or participate in a background check until a conditional job offer is made to you. After making a conditional offer and running a background check, if Eaton is concerned about conviction that is directly related to the job, you will be given the chance to explain the circumstances surrounding the conviction, provide mitigating evidence, or challenge the accuracy of the background report. To request a disability-related reasonable accommodation to assist you in your job search, application, or interview process, please call us at ************** to discuss your specific need. Only accommodation requests will be accepted by this phone number. We know that good benefit programs are important to employees and their families. Eaton provides various Health and Welfare benefits as well as Retirement benefits, and several programs that provide for paid and unpaid time away from work. Click here for more detail: Eaton Benefits Overview. Please note that specific programs and options available to an employee may depend on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Avery Dennison is seeking a Team Manager to join the Spinach Dr facility in support of our Night Shift Coating Operations in Mentor, Ohio which runs 7:00pm - 7:00am Mon-Fri. This role will coordinate with the Team Lead to ensure leadership coverage during scheduled production. The successful candidate will be an energetic leader with a proven track record of continuously training, developing, motivating, and coaching team members. The Team Manager will provide front-line leadership and direction for all Safety, Quality, Service, Productivity, Cost Reduction, and People objectives and goals within an assigned area of the facility while meeting internal and external customer needs. As part of our team, this individual will report to the Operations Manager and operate under general guidance from Plant Leadership to ensure execution of daily operational efficiencies, implementation of key business objectives, and leadership of key people initiatives. In your role as Night Shift Team Manager, delivering on these responsibilities is critical to success: * Perform general management duties, exercising usual authority concerning staff, performance appraisals, promotions and terminations. Responsible for training and development staff, estimating resource/labor needs, assigning work, meeting completion dates, and ensuring consistent application of organizational policies. Maintain all timekeeping, overtime and vacation records and schedules. * Act as a team role model and change-agent. Positively lead and influence team members to partner together to achieve individual and business goals. Model and promote the Corporation's Code of Business Ethics and Values * Regard safety as a core value: Lead the efforts to create a safety conscious environment; be actively involved in safety initiatives. Lead monthly safety meetings and daily safety huddles. Lead 5S activities, housekeeping, and recycling programs. * Responsible for key operational measures within the business unit (service, quality, productivity, cost, safety); able to measure performance of team against performance targets and provide feedback for continuous improvement. * Maintain quality control processes to ensure products/services meet quality standards; lead implementation of process improvements. Drive improvement strategies in all key metric areas; manage production flow, staffing schedule and resources to budget and plan. * Collaborate with other functional areas to resolve problems and develop improved manufacturing processes. Make efforts to reduce manufacturing waste and process complexity. * Analyze data to interpret performance of the team, as well as identify and lead efforts to transform performance in identified areas. Education: * Bachelor's degree in Mechanical, Chemical, or Industrial engineering preferred. HS Diploma/GED with experience in a technical/mechanical setting in conjunction with a demonstrated commitment to continuing education and development will also be considered. Experience: * 3+ years demonstrated leadership experience in an industrial setting (Manufacturing, warehousing, etc.) Other: * Demonstrated ability to lead, coach and develop a diverse team of individuals performing a variety of tasks required, and maintain a strong culture of accountability. * Must have strong floor presence, ability to work night shift hybrid schedule Must be able to flex work schedule periodically for training, development and operational / business purposes. * Strong customer focus, communication, planning and coordination skills. Ability to think ahead, anticipate problems, make decisions and take appropriate action. * Skilled in designing and implementing operational improvement strategies for safety, cost, quality, training, inventory and services. * Skilled in analyzing and drawing information for daily operational needs and improvement for the team. Familiarity with ELS Operating Principles strongly preferred. WHERE YOU'LL WORK: Mentor, OH The base salary range for this position will be $75k-100k / year. The hiring base salary range represents what Avery Dennison reasonably expects to pay for this position as of the date of this posting. Actual salaries will vary within the range, and in some circumstances may be above or below the range, based on various factors including but not limited to a candidate's relevant skills, experience, education and training, and location, as well as the job scope and complexity, responsibilities, and regular and/or necessary travel required for the position, which may change depending on the candidate pool. Avery Dennison reserves the right to modify this information at any time, subject to applicable law. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability, protected veteran status or other protected status. EEOE/M/F/Vet/Disabled. All your information will be kept confidential according to EEO guidelines. If you require accommodations to view or apply for a job, alternative methods are available to submit an application. Please contact ************** or ********************************** to discuss reasonable accommodations.

Avery Dennison Corporation (NYSE: AVY) is a global materials science and digital identification solutions company. We are Making Possible™ products and solutions that help advance the industries we serve, providing branding and information solutions that optimize labor and supply chain efficiency, reduce waste, advance sustainability, circularity and transparency, and better connect brands and consumers. We design and develop labeling and functional materials, radio-frequency identification (RFID) inlays and tags, software applications that connect the physical and digital, and offerings that enhance branded packaging and carry or display information that improves the customer experience. Serving industries worldwide - including home and personal care, apparel, general retail, e-commerce, logistics, food and grocery, pharmaceuticals and automotive - we employ approximately 35,000 employees in more than 50 countries. Our reported sales in 2024 were $8.8 billion. Learn more at ********************** Job Description What we are looking for Avery Dennison's North America Operations Early Career Program (OECP) has a single business focus to build talent for our world class organization. With a concentrated blend of experiential on-the-job learning and classroom and virtual training, the OECP serves as the talent pipeline for operations roles throughout the organization. We are looking for agile problem solvers who enjoy working in a dynamic and collaborative manufacturing environment to be our next Operations Associate. Associates receive in-depth exposure to multiple areas/divisions of our business. Our program is flexible and passionate about the development needs of our associates alongside the needs of the business. With a 24 month training curriculum that is rooted in our Avery Dennison values, and will guide you on your career path. We are considering individuals who are passionate about working in any of the following states post graduation: Rancho Cucamonga, CA Mentor/Painesville/Fairport Harbor, OH Miamisburg, OH Oak Harbor, OH Peachtree City, GA Mount Prospect, IL Greenfield, IN Lowell, IN Neenah, WI As you will be rotating through two different - 12 month assignments or one 18-month and 12-month rotation for January hires. At the time of offer, location will be unknown and provided in late November for January start dates and late April for June start dates. The OECP Associate could work in the following areas: A manufacturing facility or distribution center rotation is mandatory, focusing on floating project engineering, Enterprise Lean Sigma, and divisional quality. What you will be doing The primary roles and responsibilities of this Early Careers Program Associate could be: Enterprise Lean and Six Sigma: Lead and conduct problem solving efforts and propose resolutions utilizing these tools Process Improvement: Initiate and support new equipment and process upgrades to minimize scrap, increase productivity and improve quality. Assure improvements are sustained Divisional Quality: Plan, develop, enhance and implement control systems to ensure product, material, process and procedural compliance with quality standards Maintain Performance Standards: Provide on-machine expertise to operators and other staff personnel to ensure manufacturing capability and capacity are meeting delivery and performance targets Floating Project Engineer: Develop project timelines, assign responsibilities, and drive execution of tasks to deliver goals What sets us apart Avery Dennison's Early Career Program (ECP) is unlike any other with its emphasis on networking, community and support. From Day 1, networking is encouraged, promoted and expected within the program. As you are on-boarded with other ECP associates from the various tracks, you quickly develop a community with new, current, and recently graduated associates all committed to make sure you have what it takes to succeed. A core component of the curriculum is the mentoring program. Paired with a leader within the organization, the program focuses on the transition from college to corporate, leveraging strengths and defining your career path. In addition as an organization that values diversity and inclusion, we encourage our associates to take an active role in our Employee Resource Groups(ERG's). ERG's are a group of employees that help advance and promote diversity, cultural awareness and an inclusive work environment. Some of our ERG's are Black Employee Resource Group (BERG), Elevate(Women's Leadership Development), NEO Chinese Association, Unite(LGBT+), Veteran Employee Resource Group (VERG) and Voz Latina. Qualifications What you will need to bring to the program Avery Dennison has a long history of being an industry leader. Your history is important to us. It should include the following: Education Bachelor's Degree in Engineering (Chemical, Mechanical, Industrial etc.) Expected graduation date should be December 2025 (to start in January 2026) or May 2026 (to start in June of 2026). Experience Previous manufacturing internship/co-op experience required or relevant work experience in manufacturing Leadership Experience via student organizations, such as Engineers without Borders, American Society of Mechanical Engineers, American Society of Chemical Engineers, Society of Women Engineers, National Society of Black Engineers, Society of Hispanic Professional Engineers etc. Volunteerism or similar activities Travel Ability to travel 10 - 20 percent of the time *Must have reliable transportation to and from work *Sponsorship is not available now or in the future Avery Dennison is an Equal Opportunity and Affirmative Action Employer. Avery Dennison is a global leader in labeling and packaging materials and solutions. The company's applications and technologies are an integral part of products used in every major market and industry. With operations in more than 50 countries and 30,000 employees worldwide, Avery Dennison serves customers with insights and innovations that help make brands more inspiring and the world more intelligent. Additional Information The salary for this position is $84,000 /year. The base salary above represents what Avery Dennison reasonably expects to pay for this position as of the date of this posting. Actual salaries will vary within the range, and in some circumstances may be above or below the range, based on various factors including but not limited to a candidate's relevant skills, experience, education and training, and location, as well as the job scope and complexity, responsibilities, and regular and/or necessary travel required for the position, which may change depending on the candidate pool. Avery Dennison reserves the right to modify this information at any time, subject to applicable law. Equal Opportunity Statement All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability, protected veteran status or other protected status. EEOE/M/F/Vet/Disabled. All your information will be kept confidential according to EEO guidelines. If you require accommodations to view or apply for a job, alternative methods are available to submit an application. Please contact ************* or [email protected] to discuss reasonable accommodations

The Material Handler is responsible for the movement of material throughout the site. This may include loading/unloading of trailers and movement of raw materials, work in process, and finished goods. In this role, you will work Building 3, D Team, 5:50PM - 6:00AM, 12 Hours, 1-3-3. Primary Job Duties and Responsibilities: Activities and duties may vary dependent upon site specific needs. Essential functions may include, but are not limited to: * Move material to/from raw, WIP, Finished, Shipping, Receiving, and manufacturing areas. * Unload/load trucks/tankers with incoming/outgoing materials. - Verify materials against receiving/shipping documents. * Complete appropriate transactions to document the movement of material within the Inventory Management System. * Support inventory accuracy: * Complete warehouse and departmental cycles counts and correct discrepancies * Help manage winding drum and rack inventories * Raw/Finishing warehouse: * Pick up and transfer material racks, pallets, and other consumable supplies to/from production areas as required. * Condense warehouse space and maintain good housekeeping * Perform all assignments, duties, and tasks in a safe manner following standard procedures and practices. Encourage others to do so. Correct and/or report all unsafe conditions immediately. * Perform duties to continuously improve quality and productivity. * Maintain a safe, clean work area. * Assist in equipment maintenance activities as directed. * Communicate and coordinate necessary information to appropriate department/shift employees to ensure effective operations. * Lead in the recycling of pallets, cardboard, and scrap materials. * Support all 5S housekeeping activities. * Perform other duties as assigned by supervisor. Minimum Requirements: * High school diploma or equivalent required. * Must be able to follow written and oral instruction. * Must regard safety as a core value; must serve as role model for other employees and encourage adherence to safety practices, policies and procedures. * Must have strong service and quality focus; address issues effectively when problems arise and take initiative to understand root cause, then communicate / education team in a timely manner. * Must be able to actively contribute in a team based environment; encourage open communication and positive interaction with peers and management to effectively reach a common goal. * Must demonstrate proficiency in essential tasks of the job and a willingness to learn and share knowledge; must take initiative to cross-train and sustain acquired skills. * Must have demonstrated record of flexibility and dependability in order to support production and customer focus. * Must be able and willing to work overtime, including short-notice requests. * Must demonstrate proficiency with computer applications, especially strong MFG Pro transactional skills. Preferred Requirements: * 3-5+ year's previous material handling experience. * Solid interpersonal skills, mathematical aptitude, mechanical/technical aptitude and logical problem solving skills. * Skilled in working independently in a safe and timely manner necessary. * Be motivated towards productivity, safety and quality improvements * Experience leading continuous improvement efforts and knowledgeable about ELS Operating Principles preferred. * Adaptive, flexible, able to handle ambiguity. * Experience working in a team environment. NOTE: The physical requirements of this role may vary by location. A detailed listing of the physical requirements may be obtained from the local Human Resource contact or All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability, protected veteran status, or other protected status. EEOE/M/F/Vet/Disabled. All your information will be kept confidential according to EEO guidelines. Reasonable Accommodations Notice If you require accommodations to view or apply for a job, alternative methods are available to submit an application. Please contact ************** or ********************************** to discuss reasonable accommodations.

The Coating Operator is assigned to work on a coating line and may work in one or more workstations including the face unwind, liner unwind, die, main console/winder, and quality lab. Individuals in this role may be proficient on more than one coating asset in a given location. In this role, you will work D-Team, 5:50PM-6AM, 3-1-3, 12Hr, Nights. The hourly rate for this position is $24.16 / hour. The coating line operator is responsible for leading machine set ups and changeovers, problem-solving, coordinating PM's, making decisions on machine adjustments. Primary Job Duties and Responsibilities: Activities and duties may vary dependent upon site specific needs. Essential functions may include, but are not limited to: Coating Operator * Load raw material into the machine and unload the finished product. * Determine and control the machine cycle varying and modifying as necessary. * Perform tests and check products routinely for multiple characteristics using standard measuring devices and making some judgments against not readily measurable standards. * Meet production schedules and program production sequences for optimal productivity. * Follow standard operating procedures and specifications or instructions of higher level technical personnel and monitor meters, gauges, valves, flow ratios, temperatures, pressures, and related controls and guidelines to ensure adherence to production/process specifications. * Report any malfunctions or abnormalities and make minor adjustments and repairs to equipment. * Maintain production records and logs of equipment and product performance. * Adjust set up and process operations accordingly. * Follow all health, safety, and housekeeping procedures, policies and practices and consistently work in a safe manner with regard to self, co-workers, and manufacturing systems. * Attend and participate in all required training. * Understand and implement the quality standard procedures that relate to the role and responsibilities of a Coating Operator. * Perform general housekeeping tasks and waste removal within the department/group and assists other areas as required. * Continuously review current processes and search out improvement methods to improve product/process quality and reduce waste, rework, and unnecessary work that adds no value to the work or process. * Support safety, quality, and continuous improvement initiatives. * Teamwork: Assist and support other team members in meeting department and site goals. Participate and share in performing all tasks necessary to run the facility. Contribute and participate in team decision making. Provide support in project work and other special requests. * Perform all other functions as necessary. Minimum Requirements: * High School Diploma or equivalent (GED) or 3+ years of relevant manufacturing work experience. * Previous manufacturing experience preferred * Must be able to follow written and oral instruction. * Must regard safety as a core value; must serve as role model for other employees and encourage adherence to safety practices, policies and procedures. * Must have strong service and quality focus; address issues effectively when problems arise and take initiative to understand the root cause, then communicate / educate the team in a timely manner. * Must be able to actively contribute in a team based environment; encourage open communication and positive interaction with peers and management to effectively reach a common goal. * Must demonstrate proficiency in essential tasks of the job and a willingness to learn and share knowledge; must take initiative to cross-train and sustain acquired skills. * Must have demonstrated record of flexibility and dependability in order to support production and customer focus. * Must be able and willing to work overtime, including short-notice requests. * Must demonstrate proficiency with computer applications, especially strong MFG Pro transactional skills. NOTE: The physical requirements of this role may vary by location. A detailed listing of the physical requirements may be obtained from the local Human Resource contact or the site Occupational Health Nurse. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability, protected veteran status, or other protected status. EEOE/M/F/Vet/Disabled. All your information will be kept confidential according to EEO guidelines. Reasonable Accommodations Notice If you require accommodations to view or apply for a job, alternative methods are available to submit an application. Please contact ************** or ********************************** to discuss reasonable accommodations.

Company Profile With more than 120 operations and approximately 20,000 employees worldwide, Precision Castparts Corp. is the market leader in manufacturing large, complex structural investment castings, airfoil castings, forged components, aerostructures and highly engineered, critical fasteners for aerospace applications. In addition, we are the leading producer of airfoil castings for the industrial gas turbine market. We also manufacture extruded seamless pipe, fittings, and forgings for power generation and oil & gas applications; commercial and military airframe aerostructures; and metal alloys and other materials for the casting and forging industries. With such critical applications, we insist on quality and dependability - not just in the materials and products we make, but in the people we recruit. PCC is relentless in its dedication to being a high-quality, low-cost and on-time producer; delivering the highest value to its customers while continually pursuing strategic, profitable growth. In 2016, Berkshire Hathaway, led by Chairman and CEO Warren E. Buffett, acquired Precision Castparts Corp. Job Description SUMMARY The co-op student will be working on job assignments related to their functional EH&S discipline. These assignments are designed to supplement their knowledge and experience. Our goal is to provide an effective learning experience. ESSENTIAL DUTIES AND RESPONSIBILITIES *

As a Repair Service Technician, you will be responsible for diagnosing, troubleshooting, and repairing mechanical, electrical and plumbing tools. The ideal candidate will have previous experience repairing hydraulic, mechanical, and electrical devices and possess strong critical thinking abilities. You should also possess excellent communication skills and the ability to work well within a team. This position offers a progressive pay scale, allowing for advancement based on performance and expertise. **In This Role, Your Responsibilities Will Be:** + Diagnose and troubleshoot mechanical, electronic, and hydraulic issues on a variety of mechanical, electrical, and plumbing tools. + Carry out repairs following established procedures and guidelines. + Collaborate effectively with other team members to ensure efficient repair processes and timelines. + Provide exceptional customer service by addressing inquiries and updating customers on repair progress. + Mentor and provide guidance to entry-level technicians. + Demonstrated ability to use a computer. + Other duties as assigned. **Who You Are:** You build the customer relationships. You balance planning with actions. You define issues and can map out a process. You solicit both input and discussion. You take positive action after setbacks. You make new connections and build relationships in other areas and teams. **For This Role, You Will Need:** + Ability to read and interpret product manuals and product drawing breakdowns. + Working knowledge of computer applications and the capability to read blueprints. + Good oral and written communication skills. + Good interpersonal skills. + Ability to actively take direction from peers and management. + Ability to demonstrate familiarity with hand and power tools. + Strong critical thinking and problem-solving abilities to diagnose and resolve complex technical issues. + Excellent communication skills to interact with team members and provide updates to customers. + Ability to work well in a team environment, assisting entry-level technicians and collaborating with more experienced technicians. **Preferred Qualifications That Set You Apart:** + Experience working in a manufacturing environment. + Experience working in a customer-facing role. + Experience troubleshooting machinery failures. **Our Culture & Commitment to You:** At Emerson, we prioritize a workplace where every employee is valued, respected, and empowered to grow. We foster an environment that encourages innovation, collaboration, and diverse perspectives-because we know that great ideas come from great teams. Our commitment to ongoing career development and growing an inclusive culture ensures you have the support to thrive. Whether through mentorship, training, or leadership opportunities, we invest in your success so you can make a lasting impact. We believe diverse teams, working together are key to driving growth and delivering business results. We recognize the importance of employee wellbeing. We prioritize providing flexible, competitive benefits plans to meet you and your family's physical, mental, financial, and social needs. We provide a variety of medical insurance plans, with dental and vision coverage, Employee Assistance Program, 401(k), tuition reimbursement, employee resource groups, recognition, and much more. Our culture offers flexible time off plans, including paid parental leave (maternal and paternal), vacation and holiday leave. **Why Work in the Greater Cleveland Area** Our facility is located in Elyria, OH (our world headquarters), which is conveniently located within driving distance to Cleveland. The area's generally low costs of living, excellent school systems, and low crime rates create a family-friendly environment. The area is home to several growing communities with restaurants, festivals, shopping, and arts scenes that make them exciting places to live and work. **About Our Location** Since the invention of the modern pipe wrench in 1923, the 25-acre RIDGID world headquarters in Elyria, OH has been developing tools that help trades professionals tackle jobs faster, safer, and more accurately. Today, more than 600 employees work in 734K sq. ft. of office and manufacturing space. The campus is also home to a factory tool service center and a state-of-the-art "schoolhouse" training center that educates and trains hundreds of tradespersons annually. In addition to the iconic wrench, the campus manufactures RIDGID battery hydraulic tools, pipe and electrical tools, and drain cleaning components, as well as Greenlee step bits and knock-out tools. Emerson's Professional Tools business provides the industry's broadest portfolio of advanced, reliable tools and technologies for the mechanical, electrical, and plumbing trades. \#LI-BC3 **WHY EMERSON** **Our Commitment to Our People** At Emerson, we are motivated by a spirit of collaboration that helps our diverse, multicultural teams across the world drive innovation that makes the world healthier, safer, smarter, and more sustainable. And we want you to join us in our bold aspiration. We have built an engaged community of inquisitive, dedicated people who thrive knowing they are welcomed, trusted, celebrated, and empowered to solve the world's most complex problems - for our customers, our communities, and the planet. You'll contribute to this vital work while further developing your skills through our award-winning employee development programs. We are a proud corporate citizen in every city where we operate and are committed to our people, our communities, and the world at large. We take this responsibility seriously and strive to make a positive impact through every endeavor. At Emerson, you'll see firsthand that our people are at the center of everything we do. So, let's go. Let's think differently. Learn, collaborate, and grow. Seek opportunity. Push boundaries. Be empowered to make things better. Speed up to break through. Let's go, together. **Work Authorization** Emerson will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas such as E, F-1(including those with OPT or CPT) , H-1, H-2, L-1, B, J or TN, or who need sponsorship for work authorization now or in the future, are not eligible for hire. **Equal Opportunity Employer** Emerson is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to sex, race, color, religion, national origin, age, marital status, political affiliation, sexual orientation, gender identity, genetic information, disability or protected veteran status. We are committed to providing a workplace free of any discrimination or harassment. **Accessibility Assistance or Accommodation** If you have a disability and are having difficulty accessing or using this website to apply for a position, please contact: idisability.administrator@emerson.com . **ABOUT EMERSON** Emerson is a global leader in automation technology and software. Through our deep domain expertise and legacy of flawless execution, Emerson helps customers in critical industries like life sciences, energy, power and renewables, chemical and advanced factory automation operate more sustainably while improving productivity, energy security and reliability. With global operations and a comprehensive portfolio of software and technology, we are helping companies implement digital transformation to measurably improve their operations, conserve valuable resources and enhance their safety. We offer equitable opportunities, celebrate diversity, and embrace challenges with confidence that, together, we can make an impact across a broad spectrum of countries and industries. Whether you're an established professional looking for a career change, an undergraduate student exploring possibilities, or a recent graduate with an advanced degree, you'll find your chance to make a difference with Emerson. Join our team - let's go! **No calls or agencies please.** **Requisition ID** : 25027832 Emerson is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to sex, race, color, religion, national origin, age, marital status, political affiliation, sexual orientation, gender identity, genetic information, disability or protected veteran status. We are committed to providing a workplace free of any discrimination or harassment.

Company Profile With more than 120 operations and approximately 20,000 employees worldwide, Precision Castparts Corp. is the market leader in manufacturing large, complex structural investment castings, airfoil castings, forged components, aerostructures and highly engineered, critical fasteners for aerospace applications. In addition, we are the leading producer of airfoil castings for the industrial gas turbine market. We also manufacture extruded seamless pipe, fittings, and forgings for power generation and oil & gas applications; commercial and military airframe aerostructures; and metal alloys and other materials for the casting and forging industries. With such critical applications, we insist on quality and dependability - not just in the materials and products we make, but in the people we recruit. PCC is relentless in its dedication to being a high-quality, low-cost and on-time producer; delivering the highest value to its customers while continually pursuing strategic, profitable growth. In 2016, Berkshire Hathaway, led by Chairman and CEO Warren E. Buffett, acquired Precision Castparts Corp. Job Description The Wax Dresser must be able to interpret specifications issued by Product, Process, and Quality Engineering in fulfilling dressing and inspection operations. Operate the equipment efficiently when performing departmental operations. RESPONSIBILITIES: * Perform visual inspection of all wax patterns to specifications (PEI/SOP). * Dress, gate, book, blend, pin, label, stuff quartz rod and inspect patterns per procedure. * Meet the specific productivity and quality requirements. * Perform other duties that are assigned by supervision. * Follow all safety rules and wear required PPE at all times * Properly identify your work performed in Lot Control and affix required identification. * Keep the work area and equipment in a clean, orderly, and safe working condition. * Comply with all applicable Standard Operating Procedures. * Perform all other duties assigned by supervision. QUALIFICATIONS: * Meet or exceed defined Visual Acuity (when required). * Meet color perception standards needed in performance of job requirements (when required). * Additional training to comply with applicable SOP/Certifications (when required). * Must be able to learn job specifications that are required by new customers, including existing customers with changes in job specifications. * Flexibility between assembly and wax departments. * Must be able to demonstrate good communication skills. * Teamwork is essential. * Demonstrate proficiency of applicable procedure instructions. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. This position requires use of information or access to production processes subject to national security controls under U.S. export control laws and regulations (including, but not limited to the International Traffic in Arms Regulations (ITAR) and the Export Administration Regulations (EAR)). To comply with those regulations, this position may require applicants to be U.S. Persons (i.e., U.S. citizens, U.S. lawful permanent residents, protected individuals as defined by 8 U.S.C. 1324b(a)(3)), or eligible to obtain the required export authorizations from the U.S. Department of State or the U.S. Department of Commerce. Precision Castparts Corp. and its affiliates do not accept unsolicited resumes from search firms or employment agencies. Unsolicited resumes will become the property of Precision Castparts Corp & its affiliates, and no fee will be paid.

What we are looking for We are seeking innovators, collaborators, and problem solvers. Our interns do not shy away from a challenge, and are looking for a chance to create a real impact with our company. Avery Dennison's Internship/Co-Op Program has a single business focus to cultivate future talent for our rapidly growing organization. With a concentrated blend of experiential on-the-job learning, a dynamic environment, access to business leaders, and a supportive team of co-workers, peers, and supervisors, the Internship Program will provide you the opportunity to sharpen your skills and collaborate on a number of strategic projects. We're seeking an EH&S Intern/Co-Op to join our business in North America. You will be responsible for completing an assignment focused on process improvement initiatives and collaborating with plant leadership teams in our state of the art facilities. After a successful summer an EH&S Intern/Co-Op will get hands-on experience in manufacturing. Our summer internship program serves as a talent pipeline for our Early Careers Program in Environmental Health and Safety and throughout the organization. We are considering individuals who are passionate and willing to travel and work in one of our sites across North America in any of the following states: * Rancho Cucamonga, CA * Peachtree City, GA * Mount Prospect, IL * Greenfield, IN * Lowell, IN * Mentor/Painesville/Fairport Harbor, OH * Miamisburg, OH * Oak Harbor, OH * Neenah, WI At the time of offer, location will be unknown and provided in late April for a late May start date. What you will be doing * Travel to each MG-NA site and complete a waste process flow matrix by documenting each waste generated, how it is disposed, and which vendor currently receives the waste. * Conduct Line by Line permit reviews and audit each site, identifying gaps * Review and audit site compliance calendars for completeness and effectiveness. * Monitor environmental and sustainability data for anomalies and negative trends What sets us apart Avery Dennison's Summer Internship Program is unlike any other with its emphasis on networking, community and support. From Day 1, networking is encouraged, promoted and expected within the program. As you are on-boarded with other summer interns and Early Careers Program associates from various tracks, you quickly develop a community of individuals all committed to make sure you have what it takes to succeed. A core component of the curriculum is the peer mentoring program. Paired with an Early Careers Associate or program graduate within the organization, the program focuses on the transition from college to corporate, leveraging strengths and defining your early career path. In addition as an organization that values diversity and inclusion, we welcome our Summer Interns to take an active role in our Employee Resource Groups(ERG's). ERG's are a group of employees that help advance and promote diversity, cultural awareness and an inclusive work environment. Some of our ERG's are Black Employee Resource Group (BERG), Elevate(Women's Leadership Development), NEO Chinese Association, Unite(LGBT+), Veteran Employee Resource Group (VERG) and Voz Latina. Internships at Avery Dennison are paid and relocation assistance is available to those that qualify. What you will need to bring to the program Avery Dennison has a long history of being an industry leader. Your history is important to us. It should include the following: Education * Pursuing a Bachelor's Degree in Environmental Health and Science or Engineering with a focus on Environmental Studies, Sustainability, or manufacturing. Preferred Experience * Previous internship/co-op experience or relevant work experience within EH&S or Manufacturing * Experience via student organizations, such as Engineers without Borders, Environmental Health and Sciences Association, American Society of Chemical Engineers, Society of Women Engineers, National Society of Black Engineers, Society of Hispanic Professional Engineers etc. * Volunteerism or similar activities * Expected graduation of December or June of 2027. Travel * Ability to travel 80% of the time * Must have reliable transportation to and from work * Sponsorship is not available now or in the future Avery Dennison is an Equal Opportunity and Affirmative Action Employer. Avery Dennison is a global leader in labeling and packaging materials and solutions. The company's applications and technologies are an integral part of products used in every major market and industry. With operations in more than 50 countries and 30,000 employees worldwide, Avery Dennison serves customers with insights and innovations that help make brands more inspiring and the world more intelligent. The hourly salary for this position is $24.50 - $ 26.50/hour based off of where you are at academically. The hourly salary above represents what Avery Dennison reasonably expects to pay for this position as of the date of this posting. Actual salaries will vary within the range, and in some circumstances may be above or below the range, based on various factors including but not limited to a candidate's relevant skills, experience, education and training, and location, as well as the job scope and complexity, responsibilities, and regular and/or necessary travel required for the position, which may change depending on the candidate pool. Avery Dennison reserves the right to modify this information at any time, subject to applicable law. Equal Opportunity Statement All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability, protected veteran status or other protected status. EEOE/M/F/Vet/Disabled. All your information will be kept confidential according to EEO guidelines. If you require accommodations to view or apply for a job, alternative methods are available to submit an application. Please contact ************* or ********************************** to discuss reasonable accommodations

Company Profile With more than 120 operations and approximately 20,000 employees worldwide, Precision Castparts Corp. is the market leader in manufacturing large, complex structural investment castings, airfoil castings, forged components, aerostructures and highly engineered, critical fasteners for aerospace applications. In addition, we are the leading producer of airfoil castings for the industrial gas turbine market. We also manufacture extruded seamless pipe, fittings, and forgings for power generation and oil & gas applications; commercial and military airframe aerostructures; and metal alloys and other materials for the casting and forging industries. With such critical applications, we insist on quality and dependability - not just in the materials and products we make, but in the people we recruit. PCC is relentless in its dedication to being a high-quality, low-cost and on-time producer; delivering the highest value to its customers while continually pursuing strategic, profitable growth. In 2016, Berkshire Hathaway, led by Chairman and CEO Warren E. Buffett, acquired Precision Castparts Corp. Job Description Key responsibilities include: * Supervising craft personnel during the day shift * Directing maintenance activities and ensuring compliance with safety and quality standards. * Planning maintenance activities * Supporting maintenance needs of the foundry, including work assignments, scheduling of overtime, and training. * Analyzing maintenance work orders * Assigning maintenance personnel to complete necessary orders and coordinating maintenance workflows with production to minimize downtime. * Developing maintenance programs * Implementing preventive and predictive maintenance programs to maintain and optimize foundry. * Daily maintenance and repair of vacuum furnaces. * Assist foundry operators with furnace graphite maintenance as required by supervision. * Assist in other plant maintenance work as may be required * Order Parts * Maintain lead times * Keep count of minimum and maximum part count * On Call 24/7 * For emergencies * Enforcing and following all safety measures for you and your employees A Maintenance Foundry Supervisor plays a crucial role in maintaining the efficiency and safety of the foundry operations, contributing to the overall success of the facility. They are working hand in hand with the vac lab technicians and are to maintain a positive work atmosphere by behaving and communicating in a manner that gets along with customers, clients, co-workers, and management. QUALIFICATIONS: * General knowledge of vacuum furnace operation and repair required * General knowledge of cooling tower systems and repairs * Be available for 24/7 emergencies * Available for all foundry shutdowns * Experience in general maintenance of plant equipment. * Background in hydraulics, plumbing, electrical, pipe fitting, welding, and soldering needed. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. Relocation Relocation is authorized for this position. This position requires use of information or access to production processes subject to national security controls under U.S. export control laws and regulations (including, but not limited to the International Traffic in Arms Regulations (ITAR) and the Export Administration Regulations (EAR)). To comply with those regulations, this position may require applicants to be U.S. Persons (i.e., U.S. citizens, U.S. lawful permanent residents, protected individuals as defined by 8 U.S.C. 1324b(a)(3)), or eligible to obtain the required export authorizations from the U.S. Department of State or the U.S. Department of Commerce. Precision Castparts Corp. and its affiliates do not accept unsolicited resumes from search firms or employment agencies. Unsolicited resumes will become the property of Precision Castparts Corp & its affiliates, and no fee will be paid.

Company Profile With more than 120 operations and approximately 20,000 employees worldwide, Precision Castparts Corp. is the market leader in manufacturing large, complex structural investment castings, airfoil castings, forged components, aerostructures and highly engineered, critical fasteners for aerospace applications. In addition, we are the leading producer of airfoil castings for the industrial gas turbine market. We also manufacture extruded seamless pipe, fittings, and forgings for power generation and oil & gas applications; commercial and military airframe aerostructures; and metal alloys and other materials for the casting and forging industries. With such critical applications, we insist on quality and dependability - not just in the materials and products we make, but in the people we recruit. PCC is relentless in its dedication to being a high-quality, low-cost and on-time producer; delivering the highest value to its customers while continually pursuing strategic, profitable growth. In 2016, Berkshire Hathaway, led by Chairman and CEO Warren E. Buffett, acquired Precision Castparts Corp. Job Description Position Summary: The Tool and Die Maker will cut, shape, finish, and maintain tools made of metal and will create airfoil tools. Essential Functions: * Uses tools and dies to build fixtures; creates dies as required to construct new fixtures. * Repairs dies, molds, and tools when needed; disassembles molds, jigs, tools, and fixtures, then reassembles when repaired. * Reads and understands blueprints and complicated schematics as required to create and build new fixtures, tools, and machine parts. * Uses computer-aided design (CAD) software to create designs and/or turn designs into blueprints. * Inspects completed tools and dies for signs of imperfection or damage that may affect functionality. * Regularly tests all equipment, tools, and machines to ensure they are arranged and set properly and working efficiently. * Modifies machines to control speed, material feed, or path of cut as required to ensure a quality product is produced within specifications. * Maintains a safe, clean, and well-organized workspace. * Performs other related duties as assigned. * Ensure accurate and timely delivery of material, supplies and equipment. * Fitting and polishing own dies * Other duties as assigned. Required Skills: * Excellent verbal and written communication skills. * Strong analytical and problem-solving skills. * Ability to safely and accurately operate all measuring and production equipment. * Thorough knowledge of running EDM machines, Bridgeport, surface grinder as well as CNC mills 3 and 5 axis. * Working understanding of geometry, trigonometry, and algebra. * Thorough understanding of metallic properties. * Ability to work independently, and with engineers and machinists. * Proficient with computer-aided design (CAD) software. * Proficient with Microsoft Office Suite or related software. * Able to meet deadlines and be accountable. * Able to work flexible hours, off-shifts and weekends as needed to support Maintenance programs and training. * Be a motivated self-starter with a strong sense of urgency and the ability to work independently. * Maintain a positive work atmosphere with a customer focus approach to support Operations and safety. Desired Skills: * Highly organized, self-motivated individual who can work independently as well as in a collaborative team environment. Experience & Education * Successful completion of an apprentice program with a licensed professional or established company required. * On-the job training available. * Tool and diemaker certification required. Physical Demands Infrequently squatting, bending, kneeling, reaching, stair climbing, ladder climbing, other climbing,walking of rough surfaces. Occasionally bending, lifting up to 25 lbs. Frequently sitting in a chair, near moving machinery. This position requires use of information or access to production processes subject to national security controls under U.S. export control laws and regulations (including, but not limited to the International Traffic in Arms Regulations (ITAR) and the Export Administration Regulations (EAR)). To comply with those regulations, this position may require applicants to be U.S. Persons (i.e., U.S. citizens, U.S. lawful permanent residents, protected individuals as defined by 8 U.S.C. 1324b(a)(3)), or eligible to obtain the required export authorizations from the U.S. Department of State or the U.S. Department of Commerce. Precision Castparts Corp. and its affiliates do not accept unsolicited resumes from search firms or employment agencies. Unsolicited resumes will become the property of Precision Castparts Corp & its affiliates, and no fee will be paid.

Avery Dennison Corporation (NYSE: AVY) is a global materials science and digital identification solutions company. We are Making Possible™ products and solutions that help advance the industries we serve, providing branding and information solutions that optimize labor and supply chain efficiency, reduce waste, advance sustainability, circularity and transparency, and better connect brands and consumers. We design and develop labeling and functional materials, radio frequency identification (RFID) inlays and tags, software applications that connect the physical and digital, and offerings that enhance branded packaging and carry or display information that improves the customer experience. Serving industries worldwide - including home and personal care, apparel, general retail, e-commerce, logistics, food and grocery, pharmaceuticals and automotive - we employ approximately 35,000 employees in more than 50 countries. Our reported sales in 2024 were $8.8 billion. Learn more at ********************** At Avery Dennison, some of the great benefits we provide are: Health & wellness benefits starting on day 1 of employment Paid parental leave 401K eligibility Tuition reimbursement Employee Assistance Program eligibility / Health Advocate Paid vacation and paid holidays Job Description The Risk Analyst is an integral part of the Risk Management team, providing guidance in insurance and risk management matters under the supervision of the Sr. Director, Risk Management and working with the Risk Manager. Embedded as a trusted advisor within all of Avery Dennison's Business Units, the Risk Analyst will actively shape and drive cross-functional collaboration. This role offers the unique opportunity to maximize company resilience and directly protect our assets and earning potential. Primary Responsibilities: Assist in the management of the following global insurance programs that consists of renewals, claims, and insurance recovery processes: Workers' Compensation/Employer's Liability General Liability Automobile Liability Umbrella and Excess Liability Product Recall/Withdrawal Property Stock Throughput Collaborate with the EHS team on the implementation, scheduling and impact of the global property loss control plan and infrared program. Provide support to the business units as needed for the programs above (e.g., certificates of insurance, auto ID cards, posting notices, etc.). In coordination with the Sr. Director, Risk Management, administer the department's annual operating plan, including preparation of monthly and quarterly variance reports, and accruals as part of the annual budget process. Ensure timely payment of all program and department invoices, tracking against the annual operating plan. Continuously identify opportunities for improvement for our programs, as well as potential cost/time-savings initiatives. Assist the Risk Manager with the administration of our Risk Management Information System and intranet portal. Assist in the company's semiannual Enterprise Risk Management processes. Work with the Sr. Director, Risk management to support Avery Dennison's captive insurance company. Assist with acquisition diligence and integration. Perform other related duties requiring a high degree of judgment and discernment in handling sensitive and confidential matters, as assigned. Qualifications Bachelor's degree in Risk Management, Business, Accounting, Finance or related field. MBA or legal background a plus. 2+ years or more experience working either in a corporate risk management environment with global risks or at a corporate insurance broker working on large, complex accounts. ARM Certification or similar insurance certification a plus, or desire to obtain certification in support of personal development and departmental capability. Detail-oriented with exceptional analytical and organizational skills. Strong oral and written communication skills, including ability to effectively present complex topics in a persuasive and concise manner. Ability to influence, motivate and collaborate with others to quickly achieve results, particularly with a geographically dispersed client base. Ability to effectively plan, organize, direct and control projects. Travel may be required. Team player with a high energy, positive outlook and professional demeanor who takes initiative to advance within the department and promote enhanced visibility of the entire function. Additional Information The base salary range for this position will be $70k-100k / year. The hiring base salary range represents what Avery Dennison reasonably expects to pay for this position as of the date of this posting. Actual salaries will vary within the range, and in some circumstances may be above or below the range, based on various factors including but not limited to a candidate's relevant skills, experience, education and training, and location, as well as the job scope and complexity, responsibilities, and regular and/or necessary travel required for the position, which may change depending on the candidate pool. Avery Dennison reserves the right to modify this information at any time, subject to applicable law. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability, protected veteran status, or other protected status. EEOE/M/F/Vet/Disabled. All your information will be kept confidential according to EEO guidelines. Reasonable Accommodations Notice If you require accommodations to view or apply for a job, alternative methods are available to submit an application. Please contact ************** or ********************************** to discuss reasonable accommodations.

As a Controls Technician, you will be required to conduct general maintenance inspections, perform routine electrical and mechanical maintenance to minimize downtime. You will also play a role in the installation of new equipment and upgrades for production growth. **In This Role, Your Responsibilities Will Be:** + Solve and repair electrical, mechanical, hydraulic and pneumatic issues on various types of equipment. + Fix, install and set-up control systems, which would include PLC's, HMI's, sensors and other automation equipment. + Knowledge of Allen-Bradley and Siemans. + Experience with RSlogix 500 and 5000 and DirectLogic. + Experience with Allen Bradley HMI's. + Knowledge of Trio Motion Control systems a plus + Work with AC/DC drives, variable frequency drives and motors. + Routinely inspecting electrical systems such as wiring, fixtures, and appliances. + Identifying faults or hazards and implementing solutions. + Solving system failures. + Ability to read and understand electrical wire diagrams. + Testing of electrical systems with voltmeters, ohmmeters and meggers. + Conducting maintenance repairs, preventive maintenance and corrective maintenance. + Providing suggestions for equipment upgrade or replacement. + Serve as the main point of contact for machine upgrade projects. + Installation of electrical equipment and fixtures in the building. + Adhering to safety and performance standards. **Who You Are:** + You understand the importance and interdependence of internal customer relationships. You take time to ask questions and define the problem and make learning a priority and a goal. You convert ideas into actions and produce results with new initiatives. You think about multiple ways to get the same outcome. You stay aligned with your goals and stay productive. **For This Role, You Will Need:** + High School Diploma or GED + Electrician Qualification Certificate. + 4 years + work experience as an Electrical/Control Technician. + Familiarity with industrial electrical systems and the National Electrical Code. + Experience with low voltage control, 460/480, 3 phase power. + Ability to layout, install components, and wire electrical panels. + Must be reliable and be at work on time. + Ability to do things on your own and be self-directed. + Microsoft Office skills **Preferred Qualifications That Set You Apart:** + High level of problem-solving skills. + Good communication, must work well with others. + Project Management experience **Why Would You Want to Work in the Greater Cleveland Area:** This role is based at our World HQ in Elyria (just a little west of Cleveland), OH USA. Our Elyria, OH facility is conveniently located within driving distance to Cleveland. The area's generally low costs of living, excellent school systems, and low crime rates build a family-friendly environment. The area is home to several growing communities with restaurants, festivals, shopping, and arts scenes that make them exciting places to live and work. **About our location:** Since the invention of the modern pipe wrench in 1923, the 25-acre RIDGID world headquarters in Elyria, OH has been developing tools that help trades professionals tackle jobs faster, safer, and more accurately. Today, more than 600 employees work in 734K square feet of office and manufacturing space. The campus is also home to a factory tool service center and an innovative "schoolhouse" training center that educates and trains hundreds of tradespersons annually. In addition to the iconic wrench, the campus manufactures RIDGID battery hydraulic tools, pipe and electrical tools, and drain cleaning components, as well as Greenlee step bits and knock-out tools. Emerson's Professional Tools business provides the industry's broadest portfolio of sophisticated, reliable tools and technologies for the mechanical, electrical, and plumbing trades. **Our Offer to You:** $1.00 Shift Differential for 2nd and 3rd shifts. $1,000 retention bonus $1,000 referral bonus 24/7 Fitness Center On-Site Cafeteria **Our Culture & Commitment to You ** At Emerson, we prioritize a workplace where every employee is valued, respected, and empowered to grow. We foster an environment that encourages innovation, collaboration, and diverse perspectives-because we know that phenomenal ideas come from great teams. Our commitment to ongoing career development and growing an inclusive culture ensures you have the support to thrive. Whether through mentorship, training, or leadership opportunities, we invest in your success so you can make a lasting impact. We believe diverse teams, working together are key to driving growth and delivering business results. We recognize the importance of employee wellbeing. We prioritize providing flexible, competitive benefits plans to meet you and your family's physical, mental, financial, and social needs. We provide a variety of medical insurance plans, with dental and vision coverage, Employee Assistance Program, 401(k), tuition reimbursement, employee resource groups, recognition, and much more. Our culture offers flexible time off plans, including paid parental leave (maternal and paternal), vacation and holiday leave. **WHY EMERSON** **Our Commitment to Our People** At Emerson, we are motivated by a spirit of collaboration that helps our diverse, multicultural teams across the world drive innovation that makes the world healthier, safer, smarter, and more sustainable. And we want you to join us in our bold aspiration. We have built an engaged community of inquisitive, dedicated people who thrive knowing they are welcomed, trusted, celebrated, and empowered to solve the world's most complex problems - for our customers, our communities, and the planet. You'll contribute to this vital work while further developing your skills through our award-winning employee development programs. We are a proud corporate citizen in every city where we operate and are committed to our people, our communities, and the world at large. We take this responsibility seriously and strive to make a positive impact through every endeavor. At Emerson, you'll see firsthand that our people are at the center of everything we do. So, let's go. Let's think differently. Learn, collaborate, and grow. Seek opportunity. Push boundaries. Be empowered to make things better. Speed up to break through. Let's go, together. **Work Authorization** Emerson will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas such as E, F-1(including those with OPT or CPT) , H-1, H-2, L-1, B, J or TN, or who need sponsorship for work authorization now or in the future, are not eligible for hire. **Equal Opportunity Employer** Emerson is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to sex, race, color, religion, national origin, age, marital status, political affiliation, sexual orientation, gender identity, genetic information, disability or protected veteran status. We are committed to providing a workplace free of any discrimination or harassment. **Accessibility Assistance or Accommodation** If you have a disability and are having difficulty accessing or using this website to apply for a position, please contact: idisability.administrator@emerson.com . **ABOUT EMERSON** Emerson is a global leader in automation technology and software. Through our deep domain expertise and legacy of flawless execution, Emerson helps customers in critical industries like life sciences, energy, power and renewables, chemical and advanced factory automation operate more sustainably while improving productivity, energy security and reliability. With global operations and a comprehensive portfolio of software and technology, we are helping companies implement digital transformation to measurably improve their operations, conserve valuable resources and enhance their safety. We offer equitable opportunities, celebrate diversity, and embrace challenges with confidence that, together, we can make an impact across a broad spectrum of countries and industries. Whether you're an established professional looking for a career change, an undergraduate student exploring possibilities, or a recent graduate with an advanced degree, you'll find your chance to make a difference with Emerson. Join our team - let's go! **No calls or agencies please.** **Requisition ID** : 25023252 Emerson is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to sex, race, color, religion, national origin, age, marital status, political affiliation, sexual orientation, gender identity, genetic information, disability or protected veteran status. We are committed to providing a workplace free of any discrimination or harassment.

Ready to shape the future of intelligent tools? As a Project Manager in Elyria, OH, you'll provide proactive leadership for cross-functional teams, including engineering, sourcing, operations, quality, trade compliance, product management, and other business partners, responsible for developing new products. In this role, you will drive project execution by coordinating activities across functions, ensuring clarity of plans and milestones, identifying and mitigating risks early, and facilitating effective communication and alignment. You will enable predictable delivery by anticipating challenges, driving accountability, promoting collaboration, and fostering continuous learning across projects. Your impact will be immediate and lasting - helping deliver solutions pros trust! Emerson's global Professional Tools business is an equal opportunity employer, offering the broadest portfolio of reliable tools and technologies for those working in mechanical, electrical, utility, and plumbing trades! With unparalleled expertise from RIDGID, Greenlee, HDE, and Klauke, we deliver tools our customers trust to handle their toughest challenges. **In This Role, Your Responsibilities Will Be:** **Project Coordination & Execution** + Develop, maintain, and communicate integrated project plans, milestones, schedules, and risks with support from the team. + Coordinate cross-functional activities across engineering, sourcing, operations, quality, compliance, and business partners to ensure clear expectations and effective progress tracking. + Prepare for and lead project meetings, manage agendas and action items, and support timely decision-making. + Facilitate milestone readiness reviews and ensure alignment on deliverables and requirements. **Risk Management & Issue Anticipation** + Lead team efforts to identify emerging risks, dependencies, and constraints; drive early mitigation actions and escalate when necessary. + Monitor workstreams to surface bottlenecks or cross-functional challenges affecting project delivery. + Develop appropriate responses to unforeseen project events, ensuring that the project goals (cost, schedule, specifications) are met. **Communication & Collaboration** + Prepare and deliver concise project updates, status reports, and communication materials for stakeholders and leadership. + Foster a collaborative, inclusive environment that encourages transparency, accountability, and constructive conflict resolution. **Process & Continuous Improvement** + Facilitate project-level retrospectives and ensure lessons learned are applied to future work. + Champion use of NPD processes, tools, and templates and provide feedback for improvement opportunities. + Contribute insights that support organizational learning and help enhance NPD practices. **Who You Are:** + You represent own interests while being attentive to others' interests as well. + You effectively communicate in various settings: one-on-one, small and large groups, or among diverse styles and position levels. + You structure work so it aligns with people's goals and motivators. + You anticipate land mines and plan approaches accordingly. + You relate comfortably with people across levels, functions, cultures, and geography. **For This Role, You Will Need:** + Bachelor's degree in engineering or related discipline. + 5+ years of experience in project management in new product development or technology environments. + Proficiency with project management tools (e.g., MS Project, Smartsheet, or equivalent). + Demonstrated ability to coordinate cross-functional teams and manage structured project execution. + Strong communication, organization, and facilitation skills. **Preferred Qualifications That Set You Apart:** + Experience with integrated hardware/software/firmware product development. + Certifications and/or relevant experience with Agile or Modified Agile for Hardware and lean product development principles. + Experience with PLM systems (Teamcenter preferred) and ERP systems (JD Edwards preferred). + Background in process improvement and adoption of structured development methodologies. + Exposure to procurement processes supporting project execution, including managing acquisition/appropriation requests (POs/ARs). + PMP certification. **Our Culture & Commitment to You:** At Emerson, we prioritize a workplace where every employee is valued, respected, and empowered to grow. We foster an environment that encourages innovation, collaboration, and diverse perspectives-because we know that great ideas come from great teams. Our commitment to ongoing career development and growing an inclusive culture ensures you have the support to thrive. Whether through mentorship, training, or leadership opportunities, we invest in your success so you can make a lasting impact. We believe diverse teams, working together are key to driving growth and delivering business results. We recognize the importance of employee wellbeing. We prioritize providing flexible, competitive benefits plans to meet you and your family's physical, mental, financial, and social needs. We provide a variety of medical insurance plans, with dental and vision coverage, Employee Assistance Program, 401(k), tuition reimbursement, employee resource groups, recognition, and much more. Our culture offers flexible time off plans, including paid parental leave (maternal and paternal), vacation and holiday leave. \#LI-BC3 **WHY EMERSON** **Our Commitment to Our People** At Emerson, we are motivated by a spirit of collaboration that helps our diverse, multicultural teams across the world drive innovation that makes the world healthier, safer, smarter, and more sustainable. And we want you to join us in our bold aspiration. We have built an engaged community of inquisitive, dedicated people who thrive knowing they are welcomed, trusted, celebrated, and empowered to solve the world's most complex problems - for our customers, our communities, and the planet. You'll contribute to this vital work while further developing your skills through our award-winning employee development programs. We are a proud corporate citizen in every city where we operate and are committed to our people, our communities, and the world at large. We take this responsibility seriously and strive to make a positive impact through every endeavor. At Emerson, you'll see firsthand that our people are at the center of everything we do. So, let's go. Let's think differently. Learn, collaborate, and grow. Seek opportunity. Push boundaries. Be empowered to make things better. Speed up to break through. Let's go, together. **Work Authorization** Emerson will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas such as E, F-1(including those with OPT or CPT) , H-1, H-2, L-1, B, J or TN, or who need sponsorship for work authorization now or in the future, are not eligible for hire. **Equal Opportunity Employer** Emerson is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to sex, race, color, religion, national origin, age, marital status, political affiliation, sexual orientation, gender identity, genetic information, disability or protected veteran status. We are committed to providing a workplace free of any discrimination or harassment. **Accessibility Assistance or Accommodation** If you have a disability and are having difficulty accessing or using this website to apply for a position, please contact: idisability.administrator@emerson.com . **ABOUT EMERSON** Emerson is a global leader in automation technology and software. Through our deep domain expertise and legacy of flawless execution, Emerson helps customers in critical industries like life sciences, energy, power and renewables, chemical and advanced factory automation operate more sustainably while improving productivity, energy security and reliability. With global operations and a comprehensive portfolio of software and technology, we are helping companies implement digital transformation to measurably improve their operations, conserve valuable resources and enhance their safety. We offer equitable opportunities, celebrate diversity, and embrace challenges with confidence that, together, we can make an impact across a broad spectrum of countries and industries. Whether you're an established professional looking for a career change, an undergraduate student exploring possibilities, or a recent graduate with an advanced degree, you'll find your chance to make a difference with Emerson. Join our team - let's go! **No calls or agencies please.** **Requisition ID** : 25030235 Emerson is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to sex, race, color, religion, national origin, age, marital status, political affiliation, sexual orientation, gender identity, genetic information, disability or protected veteran status. We are committed to providing a workplace free of any discrimination or harassment.

Org Marketing Statement Parker Hannifin is a Fortune 250 global leader in motion and control technologies and systems, with annual sales of $19.9 billion in fiscal year 2025. For more than a century, the company has been enabling engineering breakthroughs that lead to a better tomorrow in a wide range of diversified industrial and aerospace markets. Learn more at ************** or @parkerhannifin. Position Summary The role has managerial responsibility for Domestic and International Treasury services and indirect managerial responsibility for Treasury matters from the network of Financial Services Managers/Country Controllers and Shared Service Centers. In coordination with and under the direct supervision of the Vice President - Treasurer, this role exercises discretion in all facets of Global Corporate Treasury Services, including consolidated cash, debt, and capital structure. Responsibilities Essential Functions: Management of International and US Treasury Operations: * Manage and exercise discretion over the global cash management program, including all data gathering and analysis, cash concentration, management of investment portfolios and management of short-term borrowing programs. Insure best practices on a continuing basis and compliance with corporate policies. * Manage and exercise discretion over the ongoing liquidity and related funding needs of the operations and corporate functions. * Manage and exercise discretion over the on-going repatriation of capital through distributions from foreign subsidiaries, in cooperation with the Corporate Tax department. * Manage and exercise discretion regarding matters of material capital expenditures and leases. * Manage and exercise discretion over worldwide FX hedging program, interest rate exposures and cross currency swaps. * Manage and exercise discretion regarding matters related to t preparation of material for Executive Management and the Board of Directors, as required. * Manage and exercise discretion regarding matters related to special projects, as required. Under the supervision of the Vice President Treasurer: * Manage and exercise discretion in matters related to relationships with the consolidated bank group and debt rating agencies on a global basis through continual discussions, and in person interactions on an as needed basis. * Manage and exercise discretion in matters related to the global debt portfolio, including SEC filings, negotiation and execution of global syndicated credit agreements, trade Letters of Credit, maintenance of U.S. Commercial Paper program, and inter-company loan portfolio. * Manage and exercise discretion in matters related to developing, planning, recommending, executing and monitoring optimal capital structure for the consolidated entity, and the placement of debt in both U.S. and International capital markets. * Manage and exercise discretion in matters related to planning and executing financing and treasury integration for acquired companies. * Manage and exercise discretion in corporate capital allocation matters including dividends, stock repurchases, and acquisitions and divestitures. * Manage and exercise discretion in matters related to representing Corporate Treasury on inter-departmental project groups for corporate initiatives requiring treasury input. Qualifications Qualifications: * Bachelor's degree required, preferably in Accounting or Finance; MBA or equivalent strongly preferred. * Certified Cash Manager (CCM) or equivalent/advanced Treasury certification preferred; additional professional credentials (e.g., CPA) highly desirable. * Minimum of 10 years of progressive finance experience at the managerial level, with experience in Treasury Operations. * Proven track record of setting clear goals and delivering results within a collaborative, continuous‑improvement environment. * Demonstrated success in recruiting, training, supervising, and developing high‑performing teams. * Strong ethical judgment, excellent written and verbal communication, and superior relationship‑building and presentation skills. * Commitment and interest in long‑term advancement into senior finance leadership roles (e.g., VP - Treasurer). * Willingness to travel internationally as required. * Multilingual proficiency (oral and written) is highly preferred. Equal Employment Opportunity Parker is an Equal Opportunity and Affirmative Action Employer. Parker is committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job related reasons regardless of race, ethnicity, color, religion, sex, sexual orientation, age, national origin, disability, gender identity, genetic information, veteran status, or any other status protected by law. However, U.S. Citizenship, Permanent Residency or other appropriate status is required for certain positions, in accord with U.S. import & export regulations. ("Minority / Female / Disability / Veteran / VEVRAA Federal Contractor") If you would like more information about Equal Employment Opportunity as an applicant under the law, please go to Employees & Job Applicants | U.S. Equal Employment Opportunity Commission

Ready to shape the future of professional tools? In this exciting new role as a Systems Engineer in Elyria, OH, you'll be responsible for shaping and guiding the mechanical and product-level system architecture across new product development (NPD) initiatives in partnership with category engineering teams. This is a hands-on technical leadership role that actively shapes early concepts, evaluates tradeoffs, and influences real design decisions. This role ensures our products are built on sound, scalable, reusable mechanical subsystems and interfaces that enable speed, consistency, cross-category integration, and high-quality outcomes. Working across product categories and with multidisciplinary engineering teams, you'll identify subsystem requirements, define mechanical interfaces, align cross-functional stakeholders, and establish strategies for subsystem reuse and design methodology standardization. You'll collaborate with the Electrical Systems Architect and other shared-service teams, most notably Industrial Design, to enable cohesive, user-centered, technically robust product architectures. Your impact will be immediate and lasting - helping deliver solutions pros trust! In This Role, Your Responsibilities Will Be: System Architecture & Requirements Definition Define the initial, critical, and detailed mechanical system architecture for new products. Establish system-level and subsystem-level mechanical requirements based on product-level requirements that guide design, integration, and verification. Identify required subsystems (structural, thermal, motion, safety, packaging, sealing, etc.) and specify the performance and interface requirements for each. Subsystem Strategy & Reuse Identify opportunities to leverage common mechanical subsystems, components, and design methodologies across product categories. Lead efforts to develop and maintain reusable subsystem libraries, best-practice templates, and standard interface definitions. Evaluate tradeoffs between bespoke design and platform reuse based on performance, cost, manufacturability, and NPD speed. Cross-Functional Technical Collaboration Collaborate closely with the Electrical Systems Architect to develop holistic product-level technical architectures and ensure mechanical-electrical-software coherence. Partner with Industrial Design to align mechanical architecture with user experience, ergonomics, form factor, aesthetic intent, and brand consistency. Engage Manufacturing Engineering, Quality, Product Management, and Service to ensure mechanical architecture decisions are viable, scalable, and aligned with business needs. NPD Process Enablement & Technical Leadership Work with Lead/Principal Engineers on category teams to ensure projects start with clear, intentional, and complete product requirements. Facilitate architectural reviews focused on early alignment, risk identification, and integration readiness. Provide early identification of technical risks and guide research, prototyping, or analysis activities needed to de-risk architectures in collaboration with the Lead Engineer. Monitor mechanical architecture implementation across projects and ensure learnings feed continuous improvement. Technology Evaluation & Innovation Evaluate emerging mechanical technologies, materials, and design approaches for potential application in future products. Drive innovation in mechanical integration, miniaturization, motion systems, sealing strategies, structural solutions, and other domain-relevant areas. Who You Are: You create teamwork allowing others across the organization to achieve shared objectives. You effectively communicate in various settings: one-on-one, small and large groups, or among diverse styles and position levels. You evaluate pros and cons, risks and benefits of different solution options. You create competitive and breakthrough strategies that show a clear connection between vision and action. You encourage diverse thinking to promote and nurture innovation. For This Role, You Will Need: Bachelor's degree in mechanical engineering or related field 5+ years of experience in mechanical system design, systems engineering, or architecture roles Experience developing complex electro-mechanical products Preferred Qualifications That Set You Apart: Experience with consumer or industrial hardware NPD in multidisciplinary environments. Experience defining mechanical system architectures or leading early-phase concept development. Proficiency with CAD tools and simulation/analysis methods (FEA, thermal analysis, tolerance analysis). Familiarity with DFMA, reliability engineering, and design controls. Experience integrating mechanical designs with embedded electronics. Our Culture & Commitment to You: At Emerson, we prioritize a workplace where every employee is valued, respected, and empowered to grow. We foster an environment that encourages innovation, collaboration, and diverse perspectives-because we know that great ideas come from great teams. Our commitment to ongoing career development and growing an inclusive culture ensures you have the support to thrive. Whether through mentorship, training, or leadership opportunities, we invest in your success so you can make a lasting impact. We believe diverse teams, working together are key to driving growth and delivering business results. We recognize the importance of employee wellbeing. We prioritize providing flexible, competitive benefits plans to meet you and your family's physical, mental, financial, and social needs. We provide a variety of medical insurance plans, with dental and vision coverage, Employee Assistance Program, 401(k), tuition reimbursement, employee resource groups, recognition, and much more. Our culture offers flexible time off plans, including paid parental leave (maternal and paternal), vacation and holiday leave. #LI-BC3

The Enterprise Digital and IT Team Lead will assist with supporting the development and management of Informational Technology systems/services. They will work closely with Enterprise and Corporate IT Leaders and staff and interact with our business partners, to manage resources to deliver efficient technology solutions while maintaining operational relationships with Parker suppliers and location contacts. Scope/Supervision and Interaction Has Direct Reports Works with Division staff and other Corporate IT staff under the direction and guidance of Enterprise management. Supervises project leaders and technical analysts. Maintains operational relationships with vendors and Parker locations. Responsibilities * Essential Functions * Implementation and Maintenance of IT Systems and Services Implement and maintain IT systems and services while providing world class support for our global user base. This includes managing multiple teams, including Hemel SD, Cleveland SD, Irvine SD, and TechM managed services. * Efficiency and Effectiveness of Systems Continual assessment and improvement, to ensure all IT systems and services under this role's management operate efficiently and effectively. Provide solution(s) as identified securing safe and secure uptime. This includes managing all KPIs, analytics, surveys, and other supporting metrics to deliver gold standard service and support as well as drive quality assurance with accurate and transparent metrics for IT leadership. * Creation of IT Standards This role involves creating standards for IT systems and services that promote flexibility and maintainability. Establish global standards for customer support, develop and maintain corporate IT request templates and processes, implement enhanced support at HQ through the addition of "Pitstop" local support in conjunction with L2 support teams. * Identification of IT Deficiencies Identify deficiencies in IT systems and recommend solutions and improvements. This may include, for example, simplification of processes within ServiceNow, reduction and automation of call lists, enhancing support using AI. Also, will work with IT division and CORP leadership for opportunities that improve customer support functionality, cost reduction, and overall UX. * Management of Personnel and Resource Needs Ensure proper resource scaling that manages and develops in alignment with Parker's WIN Strategy and overall values and culture. Provide management with information regarding personnel, hardware, and software needs to maintain appropriate levels of systems and services. Examples include global team shift planning, application licensing needs, and seamless integration between teams. * Staff Training and Development Leadership role that ensure staff training and development opportunities support professional growth and support of IT systems, including Hemel SD, Cleveland SD, Irvine SD, and TechM managed services. Provide guidance, coaching, and drive personal growth by setting development goals that compliment annual PPP goals in collaboration and alignment with other related managed teams in this space. * Project Management Manage various enterprise IT-related projects that align with Parker division, corporate or global needs. Successfully engage and work with cross-functional teams throughout the organization to provide positive project outcomes and on-time solutions. * Training and Education Develop and train on materials and educational resources for our user community that include dynamic PowerBI dashboards, Lunch-N-Learns and individual assistance as needed. Facilitate global training to maintain consistency across all teams, create support guides and KBs for new solutions; conduct supplemental educational sessions as needed. * Personnel and Resource Needs Management Provide management with information regarding personnel, hardware, and software needs to maintain appropriate levels of systems and services. This includes addressing PC exceptions, application licensing needs and reclamation, and contractor validations. * Planning and Scheduling of IT Capabilities Direct the planning and scheduling of the development and implementation of IT capabilities. Key initiatives include global reporting, customer survey feedback, vendor assessment and management of ITSM. * Organizational Improvement Recommendations Identify organizational issues and recommend modifications or improvements. This includes addressing contractor retention issues, planning for retirements, and managing open positions within the team. Qualifications Qualifications University Degree (or international equivalent) Managerial experience and significant Project Leader experience 10+ Years Experience in IT Professionalism: Excellence, timeliness and completeness of work, responsible; team attitude, quality of presentation. Managerial skills: Supervision and coaching, customer service, planning, organization, oral /written communication Equal Employment Opportunity Parker is an Equal Opportunity and Affirmative Action Employer. Parker is committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job related reasons regardless of race, ethnicity, color, religion, sex, sexual orientation, age, national origin, disability, gender identity, genetic information, veteran status, or any other status protected by law. However, U.S. Citizenship, Permanent Residency or other appropriate status is required for certain positions, in accord with U.S. import & export regulations. ("Minority / Female / Disability / Veteran / VEVRAA Federal Contractor") If you would like more information about Equal Employment Opportunity as an applicant under the law, please go to Employees & Job Applicants | U.S. Equal Employment Opportunity Commission

Avery Dennison is seeking a Senior Controls Engineer to join our team at our site in Mentor, Ohio. In this position, you will collaborate with the Engineering and Maintenance Teams to provide improvement and troubleshooting of all electrical/electronic systems, such as programmable Logic Controllers (PLC) and other drives/controls to support the manufacturing site. You will be responsible for providing manufacturing support to resolve production and quality issues that arise on a day-to-day basis by performing effective root cause problem solving to solve process issues associated with equipment and/or machine performance. The role will report directly to the Maintenance Team Manager. Your primary responsibilities and essential functions include: * Control system design, programing, testing and commissioning * PLC (programmable logic control) programming and troubleshooting * Perform effective root cause problem solving to solve process issues associated with equipment and/or machine performance. * Drive and support productivity and operator experience improvement with changes to programming, equipment, and or HMI screens. * Assist in development of capital plans to support the divisional drives and controls strategy. * Develop and maintain drive, controls and SCADA system best practices through collaboration with other process technology teams. * Perform a wide variety of functions such as installation, maintenance, and repair of equipment for generating, distributing, and utilizing electrical energy. Uses instruments to test circuits and replaces or installs new power, light, electronic and control circuits. * Troubleshoot electrical malfunctions, inspects circuits and wiring for shielding and grounding, and tests electrical equipment for safety and efficiency. * Work from schematics, drawings, layouts, or other specifications to locate and diagnose trouble in the electrical system or equipment. * Create and update electrical schematics and drawings. * Drive standardization of drive and controls systems and SCADA systems throughout the division; assess gaps against best practices and develop plans to close gaps. * Interact with Maintenance, Operations, and Engineering teams to ensure equipment reliability. * Identify safety issues, support safety initiatives, and recommend and implement effective solutions. * Recommends and provides support for technology upgrade projects to improve product quality and manufacturing effectiveness. * Conduct training of employees for proper machine adjustments and operations * Be willing to have a flexible schedule to support a 24/7 operation as required * Bachelor's degree in Electrical Engineering or related * 8+ years of experience in controls or electrical engineering function in a manufacturing environment * Expertise in automation, drive and PLC control systems * Knowledgeable with National Electric Code * Experience in troubleshooting equipment and process issues * Ability to understand and troubleshoot PLC ladder logic and make system edits as needed * Hands-on ability to work through symptoms and get to root cause * Ability to execute multiple projects with minimal supervision * Excellent verbal and written communication skills among all levels of the organization Preferred * Drives: ABB, AB Powerflex, Siemens S120 * PLC: Siemens STEP 7, Allen Bradley and HMI software: FactoryTalk View Studio ME, FactoryTalk View Studio SE, Thin client/Thin client manager * HMI software; Wonderware Intouch. * Data collection systems including Wonderware Historian * Knowledge of Safety PLC and associated hardware * Proficiency in AutoCAD The salary range for this position is $100725 - $130,300/ year. The hiring base salary range above represents what Avery Dennison reasonably expects to pay for this position as of the date of this posting. Actual salaries will vary within the range, and in some circumstances may be above or below the range, based on various factors including but not limited to a candidate's relevant skills, experience, education and training, and location, as well as the job scope and complexity, responsibilities, and regular and/or necessary travel required for the position, which may change depending on the candidate pool. Avery Dennison reserves the right to modify this information at any time, subject to applicable law. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability, protected veteran status, or other protected status. EEOE/M/F/Vet/Disabled. All your information will be kept confidential according to EEO guidelines. Reasonable Accommodations Notice If you require accommodations to view or apply for a job, alternative methods are available to submit an application. Please contact ************** or ********************************** to discuss reasonable accommodations.