Production associate jobs in Casa Grande, AZ - 386 jobs

Description The Production Operator will safely control various equipment to produce products on the Production Line. POLYMER PRODUCTION OPERATOR ESSENTIAL DUTIES AND RESPONSIBILITIES: Clean mold jackets and mold core, clearing away any excess flashing, wax, and foreign debris. Scrape flashing from product. Visually inspect for quality, i.e. holes, cracks, uneven rails, short rails, etc. tell Team Leader if questionable. Set product in curing rack if quality is acceptable or scrap it if the quality is not acceptable; insert grates where applicable. Remove from curing rack when next piece is ready, (leaving larger channels in the rack for two rounds) and move from curing rack to pallet or to patch area if needed. Apply a thin coat of hot wax to top surface of mold only (consistency of wax must be liquid). Clean knockouts. Re-assemble jackets and end caps of mold so that they close properly. Insert K-rails or SK100 rails if needed. Make sure rails seat correctly in mold. Check to make sure inner bars are closed, if not, pull inner bars firmly to right of mold using wrench. Double-check that mold is closed properly. (There should be no gaps between the mold jackets and the end caps.) Maintains a clean, safe, and orderly work area. Comply with Company policies and procedures Duties and responsibilities will vary depending on location and product(s) being manufactured. POLYMER PRODUCTION OPERATOR COMPENTENCIES: Teamwork Attention to Detail Knowledge Technical Capacity POLYMER PRODUCTION OPERATOR EDUCATION and/or EXPERIENCE : High school diploma or general education degree (GED) POLYMER PRODUCTION OPERATOR PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Prolonged periods working on feet, using tools, and performing repetitive actions that entail frequent bending and stooping Required regularly to use hands to handle or feel and reach with hands and arms Must be able to squat, stand, stoop bend down, for long periods of time Required to occasionally climb or balance; stoop, kneel, and crouch; and talk or hear Must be able to lift, push, and pull a minimum of 75lbs and maximum of 100lbs Visual acuity to read instructions, operate machines, and inspect parts produced POLYMER PRODUCTION OPERATOR ADDITIONAL ELIGIBILITY QUALIFICATIONS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Ability to apply common sense understanding to carry out general instructions Ability to deal with standardized situations with occasional variables Ability to follow directions and work well in a team Thorough understanding of or the ability to quickly learn production equipment Understanding of and the ability to abide by applicable OSHA and environmental regulations This position is designated as “safety sensitive” pursuant to A.R.S. Sections 23-493(9) and 23 493.06(7).) POLYMER PRODUCTION OPERATOR ADDITIONAL DUTIES: The above is intended to describe the general content of and requirements for the performance of this job. It is not to be construed as an exhaustive statement of duties, responsibilities or physical requirements. Nothing in this job description restricts management's right to assign or reassign duties and responsibilities to this job at any time. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.

Job Description TLC Label Company is seeking energetic enthusiastic entry level candidates. TLC is in search of production minded individuals that are interested in learning a trade and becoming part of our ever growing Team. Must be mechanically inclined and willing to work around moving parts and machinery. Should be able to lift boxes and materials up to 50lbs. The current Shift that is available is 1st shift Monday-Friday, 6am-2:30pm. TLC offers Medical, Dental Vision, 401K, PTO and PST. We are located in Gilbert, AZ on Baseline Rd. East of Stapley, 1 block south of the 60 freeway. We have a very beautiful clean 55,000 sq. ft. facility with well-maintained equipment. TLC Label is a fast growing company and we hire from within, we offer and encourage opportunity advancement.

The Manufacturing Associate will be assigned to operate safely a variety of equipment such as palletizers, wrappers, forklifts and other related equipment within the Plant. (S)he will contribute to the overall department production goals and maintain a clean and safe work environment. Follow all required work safe practices. This would include compliance with Good Manufacturing Practices, wearing of all required PPE in designated areas, confined space safety, safe chemical handling, fall restraints, etc. Essential Duties: * Closely monitor the dairy production process * Perform changeovers as needed per the production schedule. * Troubleshoot and resolve basic to moderate operating difficulties and communicate all issues related to maintaining and operating equipment in a timely manner. * Clean equipment and perform other routine maintenance as assigned by Maintenance or the Supervisor * Reassemble equipment after maintenance, clean up, and changeovers * Operate all equipment following SOPs/training materials and adjust equipment, as needed, to efficiently and effectively operate the production line with minimal down time. * Follow Quality Assurance standards and collect required samples, as needed, for Quality Assurance testing * Ensure all paperwork is filled out in a clear, legible and accurate format, and completed with required information. * Follow all required work safe practices. This would include compliance of Good Manufacturing Practices, wearing of all required PPE in designated areas, confined space safety, safe chemical handling, fall restraints, etc. * Other duties as assigned Qualifications: * High school Diploma or GED preferred * Experience working in manufacturing plant a plus but not required * Ability to add, subtracts, multiply and divide in all units of measure, using whole numbers, common fractions and decimals. * Fluency in English; ability to communicate when necessary to complete duties, read and write * Ability to work in a cold and wet environment for prolonged periods of time. * Ability to work in various temperature-controlled zones ranging from cold to hot * Flexible and willing to work the demands of the department which may be subject to evenings, nights, weekends and holidays. * Must be able to frequently reach up to 31-77 inches. Physical Demands: * Regularly stand; walk; stoop, kneel, crouch, climb, or crawl * Ability to reach and handle objects, tools, or controls * Occasionally sit and occasionally climb ladders or work on a platform * Regularly lift and /or move up to 50 pounds Corporate Summary At Shamrock Foods Company, people come first - our associates, our customers, and the families we serve across the nation. A privately-held, family-owned and -operated Forbes 500 company, Shamrock is an innovator in the food industry and has been since being founded in Arizona in 1922. Our Mission At Shamrock Foods Company, we live by our founding family's motto to "treat associates like family and customers like friends." Why work for us? Benefits are a major part of your overall compensation, and we believe offering them at an affordable cost is not only the right thing to do, but it helps keep you and your family healthy. That's why Shamrock Foods pays for the majority of your health insurance, allowing you to take home more of your paycheck. And it doesn't stop there - our associates also enjoy additional benefits such as 401(k) Savings Plan, Profit Sharing, Paid Time Off, as well as our incredible growth opportunities, continued education and wellness programs. Equal Opportunity Employer At Shamrock Foods Co all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, veteran status, sexual orientation, gender identity or any other basis protected by applicable law.

We have a immediate part time opening Mon-Fri with flexible hours indoors with AC! Are you eager to learn a skill and make money? This business is family owned and operated. We value employees who like to work. There is potential for advancement and more hours Position requirements include cutting printed graphics using a variety of wall cutters, and Exacto blades, as well as applying the product to substrates. Careful attention to detail utilizing work orders that outline specifics for each custom order is paramount. The ideal candidate will be self-motivated, with problem-solving skills who pays very close attention to accuracy and detail. Comprehensive training in all aspects of this position will be provided. If this describes you, we encourage you to apply! Compensation: $18.00 per hour At FASTSIGNS, every day is unique and presents exciting opportunities, including new ways to use your talent and grow your skills. We have a large network of independently owned locations - both locally and internationally - who offer competitive pay and ongoing training opportunities. Are you ready to plan for your future? Discover your next career. Make your statement. Learn more by exploring the positions offered by FASTSIGNS centers. This franchise is independently owned and operated by a franchisee. Your application will go directly to the franchisee, and all hiring decisions will be made by the management of this franchisee. All inquiries about employment at this franchisee should be made directly to the franchise location, and not to FASTSIGNS Corporate.

Carlisle Weatherproofing Technologies (CWT) is a leading building envelope solution supplier that effectively drives energy efficiency and sustainability in commercial and residential applications. We are seeking an 2nd shift Operator at our Bonded Logic plant in Chandler, AZ. Shift: 6 pm-2:30 am Starting Pay: $21.52 plus $1.00 shift differential Duties and Responsibilities: * Operator uses equipment to assist with manufacturing, batching, filling, packaging, and other steps along a production line * Utilizes and ensures safe use of operating equipment as trained, such as; Forklifts, pumps, mixers, valves, as well as maintain high levels of housekeeping on the go * Has the ability to read, write, perform basic mathematical equations, understand, and follow instructions detailed on Work Orders (i.e. Batch Tickets) * Gathers and maintains high stocking levels of all required components in a promptly manner, to efficiently package mixed product as determined on Batch tickets * Records all required data on batch tickets, completes daily, weekly, monthly check list(s) and equipment logs as required * Understands KPI's and meets production targets given per task * Completes quality testing and records testing data as required * Disassembles, cleans and reassembles equipment as needed and trained to do so * Attends all training programs as required and sponsored by the company * Performs required tasks according to Standard Operating Procedures (SOP's) * Applies and follows all OSHA and Henry safety standards, policies and procedures that pertain to tasks performed * Maintain Cleanliness and possess organizational skills, keeps housekeeping at designated area as well as work site level Required Knowledge/Skills/Abilities: * Self-starter and be able to work with little direct supervision * Previous experience in a production environment * Effective communication skills * Must have reliable transportation * Must be dependable and have a good attendance record * Previous experience safely operating a forklift * Flexible to work overtime, as needed Education and Experience: * High School Diploma or GED is Preferred * Must be at least 18 years of age or older. * Prior experience in a manufacturing setting preferred. Working Conditions: * Fast paced manufacturing environment where workers are exposed to both ambient/outside temperatures and dust; working with mechanical parts and pinch points; exposure to increased noise levels. * Hours worked: 8-10 hours/shift, varies on shift schedule and business volume. * Flexible to the possibility of overtime and weekend hours when required. * Heavy, stationary machinery on manufacturing floor. * Radio, Calculator, Measuring Devices * Hand tools * Computer (Shop Floor and ERP) Benefits and Perks: * Our employees' well-being is crucial to Carlisle's success. Despite the nationwide increase in healthcare costs, Carlisle has maintained the same employee premiums for four consecutive years by absorbing the rising medical insurance expenses. Furthermore, you have the flexibility to tailor a benefits program that perfectly suits your needs. * Benefits offered: * Medical, Dental, and Vision insurance- DAY 1 * Life and Accidental Death & Dismemberment Insurance * Leave & Disability Income Protection (FMLA, LOA, PPL, STD, LTD) * Employee Assistance Program (EAP) * Health Advocate - health care concierge service * PTO - sick days, 11 holidays, vacation * 401K Retirement Savings Plan with company match * Employee Stock Purchase Plan * Flexible Spending accounts (commuter benefits, flexible spending accounts, health savings account) * College Scholarships for Dependents * Tuition Reimbursement

We awaken the world with energy. LG Energy Solution is the global leader in lithium-ion battery technology for electric vehicles and energy storage solutions. Located in Queen Creek, Arizona, LG Energy Solution Arizona, Inc. is LG Group's first cylindrical battery manufacturer in North America, leading the widespread distribution of electric vehicles with the most advanced battery technology in the world. Join us as we inspire our talent with growth, challenge, action and collaboration to Empower Every Possibility! Job Summary: We are seeking responsible and motivated individuals to join our team as Production Operators at our Arizona manufacturing site. In this role, you will be responsible for safely operating equipment, following standard operating procedures, and maintaining quality standards in our electrode and cell assembly production processes. The role is critical to ensuring the production of safe, reliable, and high-performance batteries. Responsibilities: Operate and monitor production equipment according to standard operating procedures (SOPs). Follow all safety rules and wear proper Personal Protective Equipment (PPE) at all times. Inspect raw materials, in-process products, and finished electrodes or assemblies to ensure compliance with quality standards. Accurately record production data, equipment readings, and quality checks in designated systems/logs. Identify, report, and help troubleshoot basic equipment or process issues. Operate industrial equipment (forklifts, pallet jack, etc.) to transfer raw materials and semi-finished products. Perform routine cleaning and minor maintenance of machines and work areas to maintain a safe and orderly environment. Collaborate with team members, team leads, supervision and engineers to meet daily production goals. Escalate safety, quality, or equipment issues to team leads promptly. Support continuous improvement activities by providing feedback on processes and equipment. Perform other duties as assigned. Qualifications: High school diploma or GED required. Commitment to workplace safety and teamwork. Ability to work overtime, including weekends, as required. Experience in large- or small-scale manufacturing in a production role, operating automated or semi-automated equipment, a plus. Familiarity with operating automated production equipment or control systems such as Human Machine Interface and Programmable Logic Controllers, a plus. Experience in powder handling, chemical batch processing, mixing, roll winding, and material conveyance, a plus. Ability to lift up to 40 lbs, stand for long periods, and work in a manufacturing environment (noise, heat, PPE use). Skills: Ability to read, understand, and follow written instructions, SOPs, and safety guidelines. Strong attention to detail and ability to perform repetitive tasks with accuracy. Basic math, computer, and data entry skills Ability to work well with other individuals and as part of a team to ensure the team meets & exceeds expectations. Why should you work here? 1. Growth - You are a self-driven individual who seeks and captures the opportunities for growth we offer by acquiring and solving tasks. 2. Challenge - You reach beyond expectations and strive for innovative methods beyond the traditional. 3. Action - You are driven, take initiative, can execute decisions with agility and fulfill tasks to completion. 4. Collaboration - You are enthusiastic about teamwork while respecting the different backgrounds and experience of colleagues. EEO Statement LG Energy Solution Arizona, Inc. is an Equal Employment Opportunity Employer.

Company: Harvest Hill Beverage Company General Production Laborer Reports to: Plant Director About Harvest Hill: Harvest Hill Beverage Company is one of the nation's largest independent branded beverage producers, delivering consistent annual revenue growth, with sales of just under $1 billion. The company was formed in June 2014 with the acquisition of Juicy Juice, and further expanded with 3 subsequent acquisitions which were consolidated into one company in May 2017. Our portfolio of iconic brands includes Juicy Juice , SunnyD , Veryfine , Fruit2O , Little HUG , Daily's Cocktails , and Nutrament . We manufacture, market, and distribute across multi-channels including Grocery, Mass Merchandisers, Warehouse Clubs, Convenience, Foodservice, and Liquor Distributors. Harvest Hill is headquartered in Stamford, CT with a nationwide network of manufacturing and distribution facilities. We employ over 1,000 employees in the United States and are owned by private equity firm, Brynwood Partners. For more information, visit harvesthill.com. Position Summary: The General Production Laborer is responsible for production duties as assigned while following appropriate processes and safety regulations. Primary Position Responsibilities: Be able to lift 25 lbs. Operate machinery used in the production process. Keep work area clean and organized by practicing good housekeeping in the immediate work area. Assist fellow employees on an as needed basis. Ability to properly package product in boxes and on pallets. Load and unload items from machines, conveyors, and conveyances All other duties as assigned. Position Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Our company: Falcon Farms is one of the leading fresh cut-flower distributors in the United States. Since 1987, the company has grown in production and commercialization, to 10 flower production farms in Colombia and Ecuador, with more than 700 acres of land and a team of over 5,000 people. The organization's commercial and distribution footprint in Miami, Atlanta, Phoenix, Dallas and Long Beach allows us to service national wholesale and mass market accounts. Our company success is largely due to our amazing team! We believe in family and teamwork, and we strive to support our team members through on the job training and providing growth opportunities. We provide a positive work environment and believe that our employees are family and we are striving for a common goal. We are a growing business and looking to add more employees to our team. We work together to bring joy to others and believe in making sure each customer that we work with gets the best experience we can provide! Website: ***************************** Job type: Full-time Benefits Health insurance Dental insurance Vision insurance 401K Pay off time What are we looking for? Punctuality and reliability Excellent interpersonal and verbal/written communication Ability understand and follow instructions What are we offering? Great opportunities for career progression Great work environment Fully bilingual company Activities / Tasks / Responsibilities Revisar flor. Poner en la banda para corte de flor Sacar capuchones Revisar calidad de la flor Ponerla en cajas Armas bolsas NOTE: This position may be exposed to minor noise, cold, dust and humidity, relative to your working environment. The company would provide all the necessary items to reduce the occasional inconvenience. $ 15.60

APEL Extrusions is an independent extruder, finisher and fabricator of aluminum extrusions serving the commercial, residential, and industrial markets of Western Canada and the Western United States. With locations in Calgary, Canada, Coburg, Oregon, and Phoenix, Arizona. We offer a clean and safe work environment. We provide benefits that include medical, dental, vision, life insurance, 401k, paid vacation, and holidays. We are currently taking applications for production workers in the below areas: Production Saw Operator Stretcher Operator Load/Unloader Finishing Helper Packer Material Handlers (forklift operator) General Duties and responsibilities Work with large industrial equipment. Review and follow work order instructions and best practice requirements. Adhere and promote all safety requirements. Read and understand dimensional prints. Operate measuring devises. Comply with all policies and procedures in accordance with our quality management system. Ability to be on time for shift schedules. Skills High degree of independence and accountability Detailed oriented individual able to frequently perform multiple tasks at a given time Able to independently perform simple calculations. Communicate well and interact with others effectively. Working knowledge of extrusion press responsibilities is preferred. Qualifications High School Diploma or Equivalent. 5+ years of manufacturing experience preferred Working Environment Exposed to a production environment which includes noise, moving machinery, fork lifts and fluctuations in temperature. Overtime is to be expected based on production requirements. Physical Requirements Frequent or occasional, walking, standing, bending, twisting, repetitive motion and ability to lift, push, pull at least 25 pounds. APEL Extrusions Inc. is an equal opportunity employer.

Select LLC Timeless was founded in 2013 with the vision of creating a Leading Lifestyle Brand around Cannabis products that are efficient, safe & discreet to use. Our passion for R&D and Brand building has led Timeless to be one of the most innovative brands in the market. Community, Culture, and Legacy are the building blocks of what we do at Timeless. We always have and will continue to work with local businesses, artists, charities, and dispensary partners to support the movements that we believe impact our industry and world for the better. About the role This role is responsible for working on the production line while packing or assisting with the quality control of Timeless products. We will rely on you to work with the production team to ensure products are produced and accounted for in accordance with company policy and state regulations. Our ideal candidate is passionate about cannabis, reliable, and strives to maintain the highest standards of quality for all of our products. Key Responsibilities: Ensure all production manufacturing processes are followed according to prescribed SOP's while also identifying opportunities to improve efficiencies Prepares and adheres labels to each package; verifies that labels for finished packages conform to State regulations Prepare material for production, processing, and assembling cannabis and materials to form pre-rolls, weighing it on a certified scale to the exact weight and placing the product in appropriate bins/bags/storage Maintains the highest levels of cleanliness and sanitation inside the processing area and participates in the clean-up of equipment and the workplace at the end of every day. Assists the Production team with daily activities of assigned shifts and helps with tasks as delegated by the Lead or Manager Contributes to team effort by accomplishing related results as needed. Adheres to the highest standards of company and plant safety programs, guidelines, rules, and regulations. Manages time efficiently in order to meet productivity goals while consistently producing quality work. Necessary Skills: Works successfully in a team setting Regular and predictable attendance is an essential function of the job. 2 - 4 Years - Experience in the production field or similar manufacturing environment 2 - 4 Years - Experience in Position Required Qualifications: The Packager position requires an H.S. Diploma or G.E.D. equivalent Must be twenty-one (21) years of age Must consent to a criminal background check performed by the Company and/or the Department of Health Services Employment offers are contingent upon successful completion of the criminal background check conducted by the Department of Health Services Valid State Issued ID Full-Time Benefits: Employee discount on website merchandise 10 paid holidays Sick Time; available after 90 days Health, Dental, Vision, & Life Insurance; available after 90 days (50% employer-sponsored plans) Vacation Time; available after 1 year of employment Paid Parental Leave; available after 1 year of employment Annual performance bonus

Job Details Division: Nucor Rebar Fabrication Southwest Other Available Locations: N/A Welcome to Nucor, where our unique culture sets us apart. Joining Nucor means becoming part of North America's largest steel and steel products manufacturer, offering unmatched career opportunities and stability. We are known for our innovative sustainability practices and are the continent's largest recycler. Our vibrant culture, built on personal connections and teamwork, empowers every team member with the freedom to innovate and contribute to our collective success. Experience a workplace where safety, efficiency, and meaningful personal connections define every day, enriching both our teammates and the communities we serve. Nucor supports its teammates with top-tier benefits like Medical, Dental, Vision, and Disability Insurance, 401K and Roth accounts, Profit sharing, Pay-for-performance bonuses, Paid parental leave, Tuition reimbursement, Stock program, Scholarships and more. Purpose: Safety is the most important part of all jobs within Nucor; therefore, candidates must be able to demonstrate the ability to initiate, lead, and uphold safety policies, practices, procedures, and housekeeping standards at all times. A rebar production worker at Nucor Rebar Fabrication will bend, cut, bundle and load reinforcing steel bars in accordance with customers' orders. You'll work with a mentor who will train you on safely using all machinery. Candidates must be able to work in an outdoor environment. Previous work in construction and landscaping is a huge plus; candidates with previous trades experience tend to be successful in the role and may have a significant opportunity for advancement within the organization. Minimum Requirements: * Must be legally authorized to work in the United States without company sponsorship now or in the future• Must be age 18 or over• Due to the operating conditions of the position, this is a safety-sensitive position, you must pass a drug test, including THCMinimum Qualifications: * Must be able to work overtime when required * Able to read and comprehend basic safety and operational instructions• Able to perform basic math for accurate bar measurements Demands: * Some heavy lifting may be necessary• Working conditions can be noisy/ dusty/ hot/ cold Nucor is an Equal Opportunity Employer and a drug-free workplace

Job Description Gummi World is a fast-growing nutraceutical manufacturer based in Chandler, Arizona. We strive to deliver the highest quality vitamin supplement products to our clients and maintain long-standing relationships with them. We think of each client as our partner and we do everything we can to help them grow their businesses. When we provide you with the highest level of quality and consistency for your products, it allows you to always provide your customers with the brand they have learned to trust. Gummi World is currently looking for ambitious, solutions orientated, proactive individuals who are looking for an incredible opportunity. Be part of making a difference. There are a variety of positions that we are looking to fill, which include: Lead Cook / Cook: Responsible for overall performance of designated gummi confectionery line (CP80, Fude300, etc.). Additionally responsible for cooking gummi slurry to proper Brix and pH for designated kettle. Primary Job Responsibilities: Prepared pectin premixes Machine functions check and line clearance check Monitoring kettle, storage and hopper temps Prepare pectin mixtures Batch record initiation Solution cook process and correlated documentation of the process Solution transfers and dispense initiation Finalization and quality checks of the batch records Between run line clearances Knowledge share and train other team members Shift briefings (information pass-down to next shift Lead Cook/Cook) Depositor: Responsible to insure the gummies meet target piece-weight and visual quality (tails, doubles, hats, etc.) specification. Primary Job Responsibilities: Assist the Lead Cook / Cook in the cooking process Performs check / verification steps on the batch record for the Lead Cook / Cook Prep the mold tracks for each run Program setting on depositor PLC Set up sprayer and fill sprayer-well Insure depositor functions correctly during operations Performs visual quality checks and takes action when gummies are out of spec Monitor unloading-pump speed throughout the batch run Flush the storage tanks and downstream lines between batch to insure that there are no clogs Cleans Hopper and Nozzles between batches Assist the Lead Cook / Cook in line clearance Shift briefings (information pass-down to next shift Depositor) Spreader: Responsible to collect, organize, and store gummies on trays and racks as they are dispensed from the cooling tunnel. Additionally responsible for performing in-process weight checks and communicating results to the Depositor. Primary Job Responsibilities: Prepare the line between batches (clean conveyor belt, stack trays, position charts, etc.) Collect the gummies as they exit the conveyor and spread evenly on the tray Stack the filled tray onto the assigned carts starting from top to bottom Perform quality weight checks and document on Batch Record Inform the Depositor immediately if any of your quality weight checks are out of spec After run is complete, weigh each tray and cover the tray with plastic Fill out necessary paperwork and bring them to the designated Dry Room Skills & Qualifications: Must have a High school diploma or GED Associates Degree preferred. Previous manufacturing experience with 2 years minimum experience in food manufacturing and/or packaging, pharmaceutical or other cGMP manufacturing and/or packaging, chemical processing and/or laboratory environment. Attention to detail in all aspects of job responsibilities, including but not limited to good documentation practices, strict adherence to Standard Operating Procedure and Manufacturing Batch Record instructions, equipment and area hygiene and safety, and cGMP adherence. Accurately and precisely operate laboratory scales, refractometers, pH meters, and other simple but precision measurement devices. The ability to perform all job functions in direct compliance with written instruction. The ability to quickly comprehend the set-up, operation, controls and trouble-shooting of equipment. Regular and on-time attendance is mandated and is an essential function of this position. Ability to lift 50 lbs by bending and stooping; climb, stand and move around on stairs, ladders and platforms, twist, turn and bend. Stand on concrete floors for an extended period of time, have non slip shoes and/or boots. Bilingual preferred. Benefits: Medical, dental, and vision insurance (employees premiums are 100% covered by the company, dependents premium costs not included) 3 weeks PTO with ability to earn more each year Friendly and welcoming environment Competitive pay Growth and career opportunities Access to supplements Powered by JazzHR 4hO4x1xvh8

A laser operator's job description typically involves the setup, operation, and maintenance of laser machinery used for tasks like cutting, engraving, and marking various materials, such as metal, plastic, and wood. They work in various industries, including manufacturing, engineering, and construction. Mon-Fri: 2:30 PM to 11:00 pm 2nd Shift Pay Rate: $25HR Key Responsibilities: Operating Laser Machinery: Setting up, operating, and monitoring laser cutting machines according to work orders and specifications. This includes selecting and setting up lenses, loading programs, and adjusting machine parameters for optimal performance. Reading and Interpreting Specifications: Reading and understanding blueprints, technical drawings, and job orders to ensure accurate production. Material Handling: Loading and unloading materials onto the laser cutting machine. Quality Control: Inspecting and measuring finished products to ensure they meet quality and dimensional standards. Maintenance and Troubleshooting: Performing routine maintenance and troubleshooting of laser equipment to ensure smooth and safe operation. This may include tasks like cleaning cutting equipment and checking gas levels. Safety Adherence: Following all safety protocols and procedures to maintain a safe working environment. Work Area Maintenance: Keeping a clean and organized work area. Required Skills and Qualifications: Technical Proficiency: Understanding of laser cutting machine operation, including CNC machining. Attention to Detail: Precision is critical in this role to ensure quality and prevent material waste. Problem-Solving Skills: Ability to identify and resolve issues with the laser equipment or production process. Mechanical Aptitude: Ability to understand and work with machinery. Blueprint Reading: Ability to read and interpret technical drawings and blueprints. Basic Math Skills: Needed for analyzing information and using measuring equipment. Computer Skills: Familiarity with CNC software and possibly CAD software. Safety Awareness: Knowledge of laser safety protocols and procedures. Educational Requirements: Typically, a high school diploma or equivalent is required. Experience operating CNC or laser cutting machines is often preferred. Some employers may prefer technical training in laser operation. Physical Demands: The job may require standing, walking, bending, kneeling, stooping, crouching, crawling, and climbing. Employees may need to frequently lift and/or move items over 50 pounds. Specific vision abilities such as close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus are also necessary. Note: Specific requirements and responsibilities may vary depending on the employer and the specific industry.

No Experience necessary Second shift 1:30PM-10PM Benefits include Earn up to 3 weeks of Vacation, Holiday, and Sick Pay Medical insurance, dental, vision, 401k Full time only friendly, respectful environment Job Details Operate several semi-automated machines and equipment to make food product. Must be able to lift 50 pounds unassisted - strong knees, shoulder and back you will be working in a food environment - no make up, jewelry, or metal on body or clothing Will monitor the flow, cooking and packaging of the product. Maintain quality control of the product in size, color, texture, packaging sealing, etc. We encourage those who have previously done physical work, such as restaurant, landscaping, housekeeping, as well as those who love working in a friendly and respectful environment. Apply online at **************************

The Manufacturing Associate will be assigned to operate safely a variety of equipment such as palletizers, wrappers, forklifts and other related equipment within the Plant. (S)he will contribute to the overall department production goals and maintain a clean and safe work environment. Follow all required work safe practices. This would include compliance with Good Manufacturing Practices, wearing of all required PPE in designated areas, confined space safety, safe chemical handling, fall restraints, etc. Essential Duties: * Closely monitor the dairy production process * Perform changeovers as needed per the production schedule. * Troubleshoot and resolve basic to moderate operating difficulties and communicate all issues related to maintaining and operating equipment in a timely manner. * Clean equipment and perform other routine maintenance as assigned by Maintenance or the Supervisor * Reassemble equipment after maintenance, clean up, and changeovers * Operate all equipment following SOPs/training materials and adjust equipment, as needed, to efficiently and effectively operate the production line with minimal down time. * Follow Quality Assurance standards and collect required samples, as needed, for Quality Assurance testing * Ensure all paperwork is filled out in a clear, legible and accurate format, and completed with required information. * Follow all required work safe practices. This would include compliance of Good Manufacturing Practices, wearing of all required PPE in designated areas, confined space safety, safe chemical handling, fall restraints, etc. * Other duties as assigned Qualifications: * High school Diploma or GED preferred * Experience working in manufacturing plant a plus but not required * Ability to add, subtracts, multiply and divide in all units of measure, using whole numbers, common fractions and decimals. * Fluency in English; ability to communicate when necessary to complete duties, read and write * Ability to work in a cold and wet environment for prolonged periods of time. * Ability to work in various temperature-controlled zones ranging from cold to hot * Flexible and willing to work the demands of the department which may be subject to evenings, nights, weekends and holidays. * Must be able to frequently reach up to 31-77 inches. Physical Demands: * Regularly stand; walk; stoop, kneel, crouch, climb, or crawl * Ability to reach and handle objects, tools, or controls * Occasionally sit and occasionally climb ladders or work on a platform * Regularly lift and /or move up to 50 pounds Corporate Summary At Shamrock Foods Company, people come first - our associates, our customers, and the families we serve across the nation. A privately-held, family-owned and -operated Forbes 500 company, Shamrock is an innovator in the food industry and has been since being founded in Arizona in 1922. Our Mission At Shamrock Foods Company, we live by our founding family's motto to "treat associates like family and customers like friends." Why work for us? Benefits are a major part of your overall compensation, and we believe offering them at an affordable cost is not only the right thing to do, but it helps keep you and your family healthy. That's why Shamrock Foods pays for the majority of your health insurance, allowing you to take home more of your paycheck. And it doesn't stop there - our associates also enjoy additional benefits such as 401(k) Savings Plan, Profit Sharing, Paid Time Off, as well as our incredible growth opportunities, continued education and wellness programs. Equal Opportunity Employer At Shamrock Foods Co all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, veteran status, sexual orientation, gender identity or any other basis protected by applicable law.

We have a immediate part time opening Mon-Fri with flexible hours indoors with AC! Are you eager to learn a skill and make money? This business is family owned and operated. We value employees who like to work. There is potential for advancement and more hours Position requirements include cutting printed graphics using a variety of wall cutters, and Exacto blades, as well as applying the product to substrates. Careful attention to detail utilizing work orders that outline specifics for each custom order is paramount. The ideal candidate will be self-motivated, with problem-solving skills who pays very close attention to accuracy and detail. Comprehensive training in all aspects of this position will be provided. If this describes you, we encourage you to apply!

Job Description Company: Harvest Hill Beverage Company General Production Laborer Reports to: Plant Director About Harvest Hill: Harvest Hill Beverage Company is one of the nation's largest independent branded beverage producers, delivering consistent annual revenue growth, with sales of just under $1 billion. The company was formed in June 2014 with the acquisition of Juicy Juice, and further expanded with 3 subsequent acquisitions which were consolidated into one company in May 2017. Our portfolio of iconic brands includes Juicy Juice , SunnyD , Veryfine , Fruit2O , Little HUG , Daily's Cocktails , and Nutrament . We manufacture, market, and distribute across multi-channels including Grocery, Mass Merchandisers, Warehouse Clubs, Convenience, Foodservice, and Liquor Distributors. Harvest Hill is headquartered in Stamford, CT with a nationwide network of manufacturing and distribution facilities. We employ over 1,000 employees in the United States and are owned by private equity firm, Brynwood Partners. For more information, visit harvesthill.com. Position Summary: The General Production Laborer is responsible for production duties as assigned while following appropriate processes and safety regulations. Primary Position Responsibilities: Be able to lift 25 lbs. Operate machinery used in the production process. Keep work area clean and organized by practicing good housekeeping in the immediate work area. Assist fellow employees on an as needed basis. Ability to properly package product in boxes and on pallets. Load and unload items from machines, conveyors, and conveyances All other duties as assigned. Position Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Shift is 6:00am - 2:30pm

Job Details Division: Nucor Rebar Fabrication Southwest Other Available Locations: N/A Welcome to Nucor, where our unique culture sets us apart. Joining Nucor means becoming part of North America's largest steel and steel products manufacturer, offering unmatched career opportunities and stability. We are known for our innovative sustainability practices and are the continent's largest recycler. Our vibrant culture, built on personal connections and teamwork, empowers every team member with the freedom to innovate and contribute to our collective success. Experience a workplace where safety, efficiency, and meaningful personal connections define every day, enriching both our teammates and the communities we serve. Nucor supports its teammates with top-tier benefits like Medical, Dental, Vision, and Disability Insurance, 401K and Roth accounts, Profit sharing, Pay-for-performance bonuses, Paid parental leave, Tuition reimbursement, Stock program, Scholarships and more. Purpose: Safety is the most important part of all jobs within Nucor; therefore, candidates must be able to demonstrate the ability to initiate, lead, and uphold safety policies, practices, procedures, and housekeeping standards at all times. A rebar production worker at Nucor Rebar Fabrication will bend, cut, bundle and load reinforcing steel bars in accordance with customers' orders. You'll work with a mentor who will train you on safely using all machinery. Candidates must be able to work in an outdoor environment. Previous work in construction and landscaping is a huge plus; candidates with previous trades experience tend to be successful in the role and may have a significant opportunity for advancement within the organization. Minimum Requirements: • Must be legally authorized to work in the United States without company sponsorship now or in the future • Must be age 18 or over • Due to the operating conditions of the position, this is a safety-sensitive position, you must pass a drug test, including THC Minimum Qualifications: • Must be able to work overtime when required • Able to read and comprehend basic safety and operational instructions • Able to perform basic math for accurate bar measurements Demands: • Some heavy lifting may be necessary • Working conditions can be noisy/ dusty/ hot/ cold Nucor is an Equal Opportunity Employer and a drug-free workplace

Gummi World is a fast-growing nutraceutical manufacturer based in Tempe, Arizona. We strive to deliver the highest quality vitamin supplement products to our clients and maintain long-standing relationships with them. We think of each client as our partner and we do everything we can to help them grow their businesses. When we provide you with the highest level of quality and consistency for your products, it allows you to always provide your customers with the brand they have learned to trust. Gummi World is currently looking for ambitious candidates to join our Production team. We are seeking a 2nd shift worker who would be able to work 2:00pm-10:30pm Monday-Friday. There are a variety of positions that we are looking to fill, which include: Lead Cook / Cook: Responsible for overall performance of designated gummi confectionery line (CP80, Fude300, etc.). Additionally responsible for cooking gummi slurry to proper Brix and pH for designated kettle. Primary Job Responsibilities: Prepared pectin premixes Machine functions check and line clearance check Monitoring kettle, storage and hopper temps Prepare pectin mixtures Batch record initiation Solution cook process and correlated documentation of the process Solution transfers and dispense initiation Finalization and quality checks of the batch records Between run line clearances Shift briefings (information pass-down to next shift Lead Cook/Cook) Depositor: Responsible to insure the gummies meet target piece-weight and visual quality (tails, doubles, hats, etc.) specification. Primary Job Responsibilities: Assist the Lead Cook / Cook in the cooking process Performs check / verification steps on the batch record for the Lead Cook / Cook Prep the mold tracks for each run Program setting on depositor PLC Set up sprayer and fill sprayer-well Insure depositor functions correctly during operations Performs visual quality checks and takes action when gummies are out of spec Monitor unloading-pump speed throughout the batch run Flush the storage tanks and downstream lines between batch to insure that there are no clogs Cleans Hopper and Nozzles between batches Assist the Lead Cook / Cook in line clearance Shift briefings (information pass-down to next shift Depositor) Spreader: Responsible to collect, organize, and store gummies on trays and racks as they are dispensed from the cooling tunnel. Additionally responsible for performing in-process weight checks and communicating results to the Depositor. Primary Job Responsibilities: Prepare the line between batches (clean conveyor belt, stack trays, position charts, etc.) Collect the gummies as they exit the conveyor and spread evenly on the tray Stack the filled tray onto the assigned carts starting from top to bottom Perform quality weight checks and document on Batch Record Inform the Depositor immediately if any of your quality weight checks are out of spec After run is complete, weigh each tray and cover the tray with plastic Fill out necessary paperwork and bring them to the designated Dry Room Skills & Qualifications: High school diploma or GED (must be at least 18 years old) Previous manufacturing experience with 2 years minimum experience in food manufacturing and/or packaging, pharmaceutical or other cGMP manufacturing and/or packaging, chemical processing and/or laboratory environment. Attention to detail in all aspects of job responsibilities, including but not limited to good documentation practices, strict adherence to Standard Operating Procedure and Manufacturing Batch Record instructions, equipment and area hygiene and safety, and cGMP adherence. Accurately and precisely operate laboratory scales, refractometers, pH meters, and other simple but precision measurement devices. The ability to perform all job functions in direct compliance with written instruction. The ability to quickly comprehend the set-up, operation, controls and trouble-shooting of equipment. Regular and on-time attendance is mandated and is an essential function of this position. Ability to lift 50 lbs by bending and stooping; climb, stand and move around on stairs, ladders and platforms, twist, turn and bend. Stand on concrete floors for an extended period of time. Have or purchase non-slip shoes. Benefits: Medical, dental, and vision insurance (employees premiums are 100% covered by the company, dependents premium costs not included) 3 weeks PTO with ability to earn more each year Friendly and welcoming environment