Production associate jobs in Sumter, SC - 103 jobs

ESSENTIAL DUTIES AND RESPONSIBILITIES: Manually place individual tortillas from stacks onto platen/conveyor at standard speed Place tortillas in the same direction and right side up on platen/conveyor Perform consistent placement of tortillas on platen/conveyor Inspect tortillas for foreign objects and quality defects Remove, rework or discard product found to be out specifications. Be able to “throw” tortillas at company standards of pace rate and placement quality. Inspect product for quality defects and remove out of spec product. Regular and dependable attendance and punctuality is an essential function of this position Perform in a fast paced environment, maintain production and quality requirements. Maintain knowledge, understanding and adherence to safety policies, USDA, GMPs, QA, HACCP, Sanitation rules and regulations, and RUIZ FOODS company policies. Regular and dependable attendance and punctuality is an essential function of this position. Maintain knowledge, understanding and adherence to safety policies, USDA, QA, HACCP, and Sanitation rules and regulations, and company policies. Throw out waste and rinse trash containers for reuse. Move trash containers to waste area. Removes food debris from conveyor catch pan and places it in designated inedible containers. May enter discarded waste information into the company computer system. Clean out debris from drain basket. May wash conveyor equipment as needed. May rinse, sweep and squeegee floors. Setup and position fatigue mats and stools for other workers at individual workstations as needed. Refill sanitizing containers as needed. Responsible for supplying food products to each line to maintain food production. Manually supply ingredients to filler machines as needed to keep up with food production rate. Manually refill hopper with buckets of food for pump operation. Manually supply ingredients to filler machines as needed to keep up with food production rate. Perform all other duties as assigned. #LI-DNI

Job Title: Polymerization Operator Employment Type: Full-Time Pay: Starting $16 after three months bumped to $20.50hr+ dependent on performance. Expected Hours: 36 48 hours per week Job Summary: We are seeking a highly motivated individual to join our team as a Polymerization Operator. This position is responsible for performing assigned tasks in the production of materials on various lines, ensuring quality products and a safe, cost-effective operation while working with minimal supervision. Key Responsibilities: Execute tasks required in the production of materials on Line A and B Systems to support production needs. Ensure compliance with safety protocols while performing all tasks in a timely manner. Monitor utilities (HTM, cooling water, steam system, air, chilled water, and demineralized water) and record necessary information. Ensure proper sampling, labeling, and packaging of finished products. Load feedstock as required (e.g., acid vessels, dissolvers). Make corrective adjustments to equipment and utilities as directed by the shift supervisor to maintain process conditions. Monitor and document all process conditions as required. Maintain a safe and clean work environment. Education and Experience: High School diploma or equivalent required. Mechanical aptitude and general knowledge of hand tools. Ability to grasp and retain instructions effectively. Strong communication skills to interact with operators and supervisors. Physical Requirements & Work Environment: Ability to work rotating swing shifts. Must be able to lift and carry up to 20 kg repetitively. Comfortable climbing and descending ladders and steps. No fear of heights or confined spaces. Routine safety equipment required: long sleeves, respirator, safety shoes, hearing protection, safety glasses. Benefits: Competitive compensation package, including: 401(k) with 6% match Dental and health insurance Employee assistance program Flexible spending account Health savings account Life insurance Paid time off Retirement plan Tuition reimbursement Vision insurance If you are interested in joining our team and contributing to our mission, please apply today!

Looking for an individual to make signs primarily by applying vinyl graphics to a variety of substrates. The ideal candidate will be self-motivated, with problem-solving skills who pays very close attention to accuracy and detail. Comprehensive training in all aspects of this position will be provided. If this describes you, we encourage you to apply! Full-time or part-time. At FASTSIGNS, every day is unique and presents exciting opportunities, including new ways to use your talent and grow your skills. We have a large network of independently owned locations - both locally and internationally - who offer competitive pay and ongoing training opportunities. Are you ready to plan for your future? Discover your next career. Make your statement. Learn more by exploring the positions offered by FASTSIGNS centers. This franchise is independently owned and operated by a franchisee. Your application will go directly to the franchisee, and all hiring decisions will be made by the management of this franchisee. All inquiries about employment at this franchisee should be made directly to the franchise location, and not to FASTSIGNS Corporate.

requires the use of Forklift. Pleasedecline if you can\'t support this type of roles. Shift: Rotating 12-hour shifts (6:45am-7:00pm and6:45pm-7:00am). Day for 2 weeks/ Nights for 2 weeks Manufacturing experience a must Experience running machines Site is not tempeture control. Interview: Manager will be interviewing PURPOSE OF THE JOB The Operations Technician II is primarily responsible forassisting the lead techs in executing the daily and long-term operations plan. The position alsoworks in partnership with the Supervior, Operations Manager, TPM teams to develop and executestrong Training and Development (T&D) plans that drive business results. Thecandidate will support the T&D pillar. This is an essential role as the plant seeks to strengthen the skillsets and core competencies of all employees. The Operations Technician II is responsiblefor conducting, documenting, and recording training initiatives. He or she will besupporting Lead Tech during the shift and supervising the technician on the production line, up tofive technicians. The Operations Technician II perform all functions of the job withspecific attention to safe behaviors, environmental stewardship, and report allnon-conformities to management JOB RESPONSIBILITIES Safety Support Follow all safety rules and procedures for the plant. Follow all lockout procedures. Follow all safety rules and procedures concerning thehandling of all chemicals. Wear appropriate Personal Protective Equipment (PPE) Support the Safety department in developing, andproviding all required training. Maintain all required certifications and skill setsnecessary to train employees Training and Development for all employees Drive implementation of training plans, creating theplans in partnership with the leadership and as prioritized based on losses Support New Hire Orientation, assisting with training newemployees in TPM Methodology and in helping employee certify in their jobs Drive cross training activity for employee development Train employees on Standardized Work, using SharePointSite for Document Control and Records Management Coach employees on the One Point Lessons (OPLs) processand on writing them Production Support Read, understand and follow all Standard OperatingProcedures throughout the Plant. Ensure that all training materials are developed andmaintained. Drive the Management of Change process related to Training Package materials such as Standard Work, Skills Matrices, and Training Plans toensure proper documentation is used for training when changes occur Support TPM Teams on implementation of TPM the OC Way Participates in the Safety and Housekeeping programs asestablished within the plant and work areas Participates in continuous improvement events A good understanding of the process equipment used inthis facility. Help in minimizing process downtime. Monitors the specific KPIs required by the job; reactsto upset conditions and escalates when necessary. Maintains an in-depth knowledge of the manufacturingprocess, inputs and outputs (i.e. KMIs in safety, quality, delivery, cost, and staffing). Understands the needs of the customer and takes action toaddress those needs. Helps identify process problems and seeks solutions. Participates in shift huddles and meetings as required Performs other related duties consistent with the natureof job as directed by management. Ability to lead team when Lead Tech is out Support breaks on shift JOB REQUIREMENTS MINIMUM QUALIFICATIONS: High School Degree Strong understanding of production line Must be 18 years or older Must be a US citizen or have the right to work in the US Must be drug and alcohol free PREFERRED EXPERIENCE: 2 years previous experience in training, continuousimprovement and/or in creating standard work Prior experience with TPM Methodology and processespreferred or 5S Demonstrated interest/involvement in the coaching andtraining of others KNOWLEDGE, SKILLS & ABILITIES: Must be able to read, write, and speak English Must have the ability to read and understand TechnicalManuals and Specification Sheets Must possess strong communication and organizationalskills Must have strong internal and external customer serviceskills Must work well in team environment Must be able to create & update Standard Work documents Must maintain all required certifications and skill setsnecessary to train employees Must have the ability to facilitate training in variousformats Must be self-motivated to work independently and in agroup, and meet targets Must have strong attention to detail Multiple Certification may be required including Lifttruck Must have good understanding of all company computersystem Must be able to check e-mail, Create, reply to e-mail Must be able to schedule and create new appointments Must have the ability to measure and assess the plantstraining needs Must be an innovative thinker style of teaching Must be able embrace efficiency as much as possible Must have a passion for continuous learning Must have experience or be willing to shadow the variousmachines/roles to gain knowledge of plant processes ESSENTIAL PHYSICAL REQUIREMENTS/WORK ENVIRONMENT The employee should possess the ability to: Acceptable background check Clear health questionnaire provided by RegionalOccupational Nurse Willingness to work flexible hours as needs arise Ability to walk/stand throughout the plant for extendedperiods Routinely ascend and descend stairs to enter work areas Safeguard self with Personal Protective Equipment (PPE) (goggles, and/or facemask) as necessary for task Operate equipment only when trained in its use and/or areworking with or under the direction of a qualified employee

NORMAL DUTIES include the following: Monitors quality and specifications incoming stock for flute, size; score position, color, label, label direction, print, and print direction and condition. Monitors quality and specifications of plates and drawings. Mounts cutting dies, printing plates Pulls rolls per the factory order. Sets side gates, belts, stacker attachments per factory order Places machine in time. Sets caliper for board and printing plate(s). Maintains information in the computer system in a timely manner. Makes adjustment needed to ensure product being produced meets all quality standards. Reports any inability to meet quality standards or setup standards to machine center Reports any maintenance problems to the machine center supervisor and assist as needed in repair of machine center. Prepares for next order while monitoring current production, as time will allow. Performs quality checks on product before and during production to ensure quality standards are met and maintained during production. The Operator will also perform any other duties as assigned. QUALIFICATION REQUIREMENTS: To perform this job successfully, an individual must have demonstrated the ability to perform each normal duty satisfactory in this and all lower classifications in this line of progression. The requirements listed below are representative of the knowledge, skill, and/or ability required. EDUCATION and/or EXPERIENCE: High School diploma or general education degree (GED); or five years related experience and/or training; or equivalent combination of education and experience. LANGUAGE SKILLS: Ability to read and interpret written documents such as safety rules, operating and maintenance instructions, factory orders, and procedure manuals. Ability to write routine reports and correspondence. Ability to communicate effectively. MATHEMATICAL SKILLS: Ability to add, subtract, multiply, and divide in all units of measure (English and Metric systems), using whole numbers, common fractions, and decimals. Ability to read an English and metric system tape measure. REASONING ABILITY: Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization may exist. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. PHYSICAL DEMANDS: The physical demands described here are representatives of those that must be met by an employee to successfully perform normal job functions. While performing the duties of this job, an individual is regularly required to stand; use hands to finger, handle, or feel objects, tools, or controls; reach with hands and arms; talk or hear; and taste or smell. An individual frequently is required to stoop, kneel, crouch, or crawl. An individual must regularly lift and/or move up to ten pounds, frequently lift and/or move up to twenty-five pounds, and occasionally lift and/or move up to fifty pounds. Specific vision abilities required by this job include close vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an individual encounters while performing the normal job functions. Reasonable accommodations may be made to enable individuals with disabilities to perform the normal job functions. While performing the duties of this job, an individual regularly works near moving mechanical parts. The employee is occasionally exposed to wet and/or humid conditions and temperature variations. The noise level in the work environment is usually moderate. Reasonable accommodations may be made to enable individuals with disabilities to perform the normal job functions. THESE RESPONSIBILITIES AND DUTIES ARE NOT INTENDED TO BE ALL-INCLUSIVE. RESPONSIBILITIES AND DUTIES MAY BE ADDED OR DELETED AS NECESSARY.

Job Description The General Production Operator must be willing and capable of learning all aspects of spiral weld pipe manufacturing. The Operator must have the ability to collaborate with the team while possessing the aptitude to collect data and independently make good decisions in real time based on those facts. The Operator must be self-motivated with the leadership skills to inspire others and have the perceptive skills to identify inconsistencies in product and equipment and develop solutions for them. Having an uncompromising commitment to safety is a requirement. Training on specific equipment and processes will be provided. Review's work orders or takes direction from the leadership team to determine what jobs are required, and in what order to run them. Assist the leader in the set-up of the machine. Reads, understands, and interprets tape measure, pi tape, drawings, specification boundary, digital readouts. Coordinates with pipe moving personnel and/or crane operators to move pipe onto test stand. Performs final inspection and measurements of pipe, and documents results on final expansion log. Verifies that all positions have been checked and ready to start. Ensures machine is kept running by observing and correcting problems that arise. Monitor's quality of alignment and weld process, pipe specifications, cement lining, and application of coating. Performs preventive maintenance and minor repairs to machinery and equipment. Refers electrical and hydraulic problems to maintenance department for resolution. Develops, recommends, and implements measures to improve production methods, equipment performance, and quality of the product. Adheres to all safety rules and brings safety issues to the attention of department leadership or safety manager. Follows all work procedures, policies, and protocols. Performs other tasks instructed by leadership team. MINIMUM QUALIFICATIONS Must be physically able to perform the essential functions of the job, with or without reasonable accommodations. Must be able to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Must be able to read, write, and interpret simple documents and instructions, short correspondence, and memos. Must be able to effectively present information in one-on-one, small group situations to employees, and members of leadership. Must be able to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Must be able to compute ratio and percent and to interpret bar graphs. Must be able to read and interpret linear and circumference measurements using tape measures and calipers. Must be able to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Must be able to read, interpret, and carry out instructions furnished in written, oral, or diagram form. Must be able to deal with problems involving several concrete variables in standardized situations. Must be able to operate computer controlled hydrostatic test stand, including reading and interpreting console indicators and gauges, and using control console to conduct tests. Must be able to read, write and effectively communicate in English. Must have the willingness to rotate to different positions as requested by manager or team leader. ESSENTIAL PHYSICAL FUNCTIONS The employee is regularly required to stand, walk, use hands to finger, handle, or feel and talk or hear. The employee is frequently required to stoop, kneel, crouch, or crawl. The employee is occasionally required to sit, reach with hands and arms, and climb or balance. The employee must regularly lift and/or move up to 10 pounds, frequently lift and/or move up to 25 pounds and occasionally lift and/or move up to 100 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, and ability to adjust focus.

The Machine Operator is responsible for programming, setting up, and operating a computer numerical control (CNC) machine while maintaining high quality and safety standards. Primary Responsibilities Read drawings Program CNC machine Estimate structural weights Read and use structural shapes charts Use layout and multing techniques to maximize material yields Take initiative and assist in the resolution of production problems Monitor performance, check output quality, and make adjustments as needed to maintain consistent production All other duties as assigned Qualifications and Requirements Knowledge of Robot Machine Certified crane operator (complex) Understand production processes Ability to perform numerical conversions (i.e., decimals to fractions) Good verbal communication skills Good technical skills Detail oriented Bending, lifting, twisting, and standing required to perform job duties Education High school diploma

INDEVCO Plastics is a member of INDEVCO North America, part of the multinational INDEVCO Group, with over 80 business units worldwide, including 40 manufacturing plants. We are a member of the Alliance to End Plastic Waste and the Sustainable Packaging Coalition. As a flexible packaging manufacturer, INDEVCO Plastics designs and manufactures sustainable plastic films and bags that promote a circular economy. Our end markets range from beverage, processed food, and pet food, to building and construction, industrial salt and minerals, lawn, and garden. We work closely with packaging converters and packaging machinery manufacturers. At INDEVCO Plastics, our philosophy is “What is good for the community is good for the company.” The four pillars that guide our work are performance, innovation, service, and care for the world around us. Our dynamic manufacturing team in Orangeburg, S.C. is seeking a motivated individual to join our team in the role of Production Technician. Performs machine set-up for orders, safely operates machine to production target, waste, and quality standards, and trouble shoots machine when it is down or not performing to standard. Involved in keeping plant and co-workers performing in a safe and efficient manner that exceeds customer's expectation. Requirements Duties include but are not limited to: · Work, act, think, and converse in terms of improving quality and eliminating waste in his/her process. · Stop any operation that is not producing product to customer expectations or its in violation of approved quality and safety standards. · Set-up machine to specification out lined on the order copy. · Set-up machine to standard set-up time and procedure. · Operates machine to standard production target and waste targets. · Assist maintenance in machine repairs and preventative maintenance. · Must be able to work efficiently and seamlessly with other divisions within Indevco Group to drive improvements. · Continuously improve the process as an individual and as team member. · Trouble shoots machine when it is down or not performing to standard. · Responsible for ensuring that the day-to-day operation of the machine is consistence with the policies and procedures which make up of Quality System. Specific duties: · Responsible for creating an environment of teamwork focused on producing quality products. · Performs inspections per Quality Procedure. · Cleans machine and area according to schedule. · Ensures machine Preventive Management is performed according to the schedule. · Set the example of safe operation by following established safety guidelines and holds self and other accountable. · Initiates and supports improvement initiatives. · Other duties as instructed by Supervisor, General Manager and/or Production. · Maintain open communication with employees and ensure their improvement ideas of operation concerns are reviewed and addressed in a timely manner. · Maintain open communication with employees and ensure their improvement ideas of operation concerns are reviewed and addressed in a timely manner. · Use shop tools, hand tools, equipment manuals, blueprints, schematics for trouble shooting and diagnosing equipment failures. · Implementation of 5S activities and follow all procedures. · Adhere to Personnel Processing Practices in IPO's Food Safety Plan as determined by the Food Safety Management System. Standards of Performance: · Makes “run / don't run” call with input from General Manager, Supervisor and Quality / Technical. Ability to communicate and work well with others. · Ensures everyone has the proper Personal Protective Equipment (PPE). Basic understanding of computers. Knowledge: · Meets production targets (% performance to production plan). · Meets Quality targets (number of complaints). · Meets Safety targets and perform audits on required timelines. · Meets all Environmental compliance (Air Permits, Waste, Storm Water, etc.) · Other duties as instructed by Plant Manager, Supervisor and/or Production Manager. · Basic understanding of all machine functions, printing, inks, mounting plates, extrusion, and reading of tape measure. · Reading, writing, and arithmetic. Physical Demand: Work is medium difficulty. Shafts can be controlled by the hoist equipment, if available. Ink buckets lifting required on occasion but no more than 40-50lbs. Other Duties: Please note this job description is not designated to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice.

Job Description NORMAL DUTIES include the following: Monitors quality and specifications incoming stock for flute, size; score position, color, label, label direction, print, and print direction and condition. Monitors quality and specifications of plates and drawings. Mounts cutting dies, printing plates Pulls rolls per the factory order. Sets side gates, belts, stacker attachments per factory order Places machine in time. Sets caliper for board and printing plate(s). Maintains information in the computer system in a timely manner. Makes adjustment needed to ensure product being produced meets all quality standards. Reports any inability to meet quality standards or setup standards to machine center Reports any maintenance problems to the machine center supervisor and assist as needed in repair of machine center. Prepares for next order while monitoring current production, as time will allow. Performs quality checks on product after and during production to ensure quality standards are met and maintained during production. The Operator will also perform any other duties as assigned. QUALIFICATION REQUIREMENTS: To perform this job successfully, an individual must have demonstrated the ability to perform each normal duty satisfactory in this and all lower classifications in this line of progression. The requirements listed below are representative of the knowledge, skill, and/or ability required. EDUCATION and/or EXPERIENCE: High School diploma or general education degree (GED); or five years related experience and/or training; or equivalent combination of education and experience. LANGUAGE SKILLS: Ability to read and interpret written documents such as safety rules, operating and maintenance instructions, factory orders, and procedure manuals. Ability to write routine reports and correspondence. Ability to communicate effectively. MATHEMATICAL SKILLS: Ability to add, subtract, multiply, and divide in all units of measure (English and Metric systems), using whole numbers, common fractions, and decimals. Ability to read an English and metric system tape measure. REASONING ABILITY: Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization may exist. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. PHYSICAL DEMANDS: The physical demands described here are representatives of those that must be met by an employee to successfully perform normal job functions. While performing the duties of this job, an individual is regularly required to stand; use hands to finger, handle, or feel objects, tools, or controls; reach with hands and arms; talk or hear; and taste or smell. An individual frequently is required to stoop, kneel, crouch, or crawl. An individual must regularly lift and/or move up to ten pounds, frequently lift and/or move up to twenty-five pounds, and occasionally lift and/or move up to fifty pounds. Specific vision abilities required by this job include close vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an individual encounters while performing the normal job functions. Reasonable accommodations may be made to enable individuals with disabilities to perform the normal job functions. While performing the duties of this job, an individual regularly works near moving mechanical parts. The employee is occasionally exposed to wet and/or humid conditions and temperature variations. The noise level in the work environment is usually moderate. Reasonable accommodations may be made to enable individuals with disabilities to perform the normal job functions. THESE RESPONSIBILITIES AND DUTIES ARE NOT INTENDED TO BE ALL-INCLUSIVE. RESPONSIBILITIES AND DUTIES MAY BE ADDED OR DELETED AS NECESSARY.

· Change all filter cartridges and properly dispose of cartridges (hazardous waste and non-hazardous) · Cleaning sludge press and transporting hazardous waste to roll off in the hazardous waste building for proper storage · Proper disposal of PPE after chemical makeup (hazardous waste) · Proper cleaning and storage of empty chemical drums · Operate & monitor performance of equipment and production machines in all areas of the facility · Operate DCS control system, dissolving system, electrolysis cells, treaters, slitters, and water treatment process · Perform preventative maintenance tasks, troubleshooting and repairs on equipment and production machines · Take responsibility for the quality of foil produced, good housekeeping and safety procedures · Using relevant information & individual judgement to determine whether events or processes comply with laws, regulations or standards · Follow all hazardous waste handling procedures as set forth in procedures manual · Other duties as required Requisite Skills, Experience and Education: · High School Diploma or equivalent · Experience in manufacturing organization preferred · Develop thorough understanding of copper foil manufacturing process and procedures, quality requirements and safety practices · Develop thorough understanding of the ISO/Quality system and work instructions for operations · Develop though understanding of the ISO/Environmental Management system. · Actively participate on quality improvement teams · Develop proficiency in all phases of the copper foil manufacturing operation. · Contribute to development of improvements to the facility processes, procedures, housekeeping, safety and equipment · Demonstrate: - Commitment to creating a successful, team based organization - Ability to relate individual achievements to team successes - Willingness to accept responsibility for HS&E issues, quality and productivity Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk and hear. This position is very active and requires use hands to finger, handle or feel; and reach with hands and arms, standing, walking, bending, kneeling, stooping, crouching, crawling, and climbing all day. The employee must frequently lift and/or move items over 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus.

PolyClean USA is seeking a highly motivated Machine Operator to join our team at Camden, SC. This role involves operating and maintaining optical sorting equipment to ensure the quality of plastic pellets. The ideal candidate is mechanically inclined, detail-oriented, and comfortable working in an industrial environment. If you enjoy working with cutting-edge sorting technology while staying local, this is the perfect opportunity for you! Key Responsibilities Sorting Operations & Equipment Management Operate and maintain EVO optical sorting units for both single and dual sort operations. Adjust sort settings to maintain or improve sorting quality. Understand product flow from classifier to pack-out and ensure accurate sorting. Perform “Turn Around” procedures to clean and prepare equipment for new product runs. Follow production schedules and adjust presets according to product type. Quality Control & Sampling Conduct routine quality inspections to ensure sorted material meets client standards. Collect and document material samples according to sampling workflow. Work closely with Satake technicians for equipment calibration and troubleshooting. Equipment Maintenance & Safety Compliance Inspect, clean, and replace hoses, receiver lids, and filters as needed. Perform routine maintenance on Satake sorting machines and air compressors. Comply with Lockout/Tagout (LOTO) protocols when servicing equipment. Properly complete and submit daily safe work permits. Workplace Efficiency & Communication Maintain clear and professional communication with coworkers, supervisors, and clients. Identify and order necessary supplies to support uninterrupted operations. Work effectively both independently and as part of a team in a structured environment. Qualifications & Requirements Required Qualifications: High school diploma or equivalent. Prior experience in manufacturing, production, or machine operation. Ability to read and comprehend technical manuals and production schedules. Strong mechanical aptitude and troubleshooting skills. Ability to work independently and follow standardized operating procedures. Preferred Qualifications: Experience operating optical sorting equipment (e.g., EVO, Satake). Prior experience in plastics, chemicals, or industrial sorting environments. Work Environment & Physical Requirements Work is performed in an industrial setting with exposure to noise, dust, and moving machinery. Requires wearing personal protective equipment (PPE) at all times (hard hat, FR clothing, safety glasses, earplugs, etc.). Ability to lift up to 50 lbs, stand for extended periods, and work in varying temperatures. Occasional travel may be offered/required during off-seasons. Join our team and be part of an industry-leading company offering stability, growth, and hands-on experience with advanced sorting technology. Apply today!

Machine Operator - Entry Level (Sheet Metal Fabrication Shop) Walker White Mechanical - Columbia, SC Full-Time | Competitive Pay + Benefits | Training Provided About Us Walker White Mechanical is a trusted leader in HVAC, plumbing, and sheet metal fabrication, serving commercial and industrial clients across South Carolina. We take pride in craftsmanship, customer service, and delivering high-quality mechanical solutions. As our fabrication shop continues to grow, we're looking for a motivated Entry-Level Machine Operator to join our team. Position Summary This is an excellent opportunity for someone who enjoys hands-on work, wants to develop technical skills, and is eager to be part of a team that fabricates components used on major mechanical projects. No prior experience is required-just a strong work ethic, willingness to learn, and attention to detail. Responsibilities Operate and assist with setup of fabrication machinery, including shears, brakes, and plasma tables Measure, cut, and form sheet metal according to shop drawings and specifications Read and interpret basic blueprints or drawings Perform quality checks to ensure accuracy and consistency of fabricated parts Maintain a clean, organized, and safe work environment Assist with loading, unloading, and material handling as needed Qualifications Mechanical aptitude and eagerness to learn new skills Ability to read a tape measure and perform basic math Dependable attendance and strong work ethic Previous fabrication or manufacturing experience is helpful but not required-we will train the right candidate Why Join Walker White Mechanical? Competitive pay and a full benefits package Training and advancement opportunities within the shop and company Stable, full-time employment with long-term career potential Clean, safe, and team-oriented work environment How to Apply If you're ready to start a career in sheet metal fabrication and grow with a respected mechanical contractor, apply today!

Mark Anthony Group is an entrepreneurial drinks company, built from the ground up by thinking differently, innovating and doing the unexpected. Our company is rooted in family values, a bold vision and relentless determination to continuously raise the bar and make a positive difference in consumers' lives. Founded in 1972, we've grown organically from a one-person import wine business into an international drinks company whose hallmarks include a portfolio of luxury wineries and iconic beverage brands, including White Claw Hard Seltzer, Mike's Hard Lemonade, Cayman Jack and Más+ by Messi. Role Purpose: Mark Anthony Brewing Inc. is hiring a PACKAGING OPERATOR responsible for monitoring process equipment, basic troubleshooting of any unforeseen process events, and ensuring that Safety and Quality are at the forefront of all activities. The PACKAGING OPERATOR will be cross trained in multiple areas and will be qualified to complete tasks in the various areas of packaging, sanitation, quality, and maintenance. Accountabilities & Impact: * Ensure continuous operation of process equipment through active process monitoring and troubleshooting. * Effectively communicate job knowledge and process changes with team members and management thru various forms of daily communication (shift handover meeting, daily production meetings, email, action logs, work orders, etc). * Perform quality inspection of product using basic lab equipment and SOPs as a guide. * Complete and maintain written documentation certifying completion of inventory checks, quality inspections, sanitation requirements, batch and blending production following SOP's, and basic maintenance tasks. * Maintain sanitation and lubrication of machinery, equipment, storage bins, workstations, etc. * Report safety and/or equipment issues to leadership. Skills & Experiences Needed: * High School diploma or equivalent required. * 1+ years of manufacturing experience. * Demonstrated experience using computers and software skills such as MS office. * Must be at least 21 years of age Working conditions: * Fast-paced and constantly changing work environment * Shift work including days, evenings, overnight shifts, and up to 12 hrs. * Overtime including weekends and holidays as needed * Ability to lift 50 lbs. * Ability to stand/move up to 8-12 hours per day. * Ability to ascend/descend stairs throughout shift. * Must wear Personal Protective Equipment (PPE) including (but not limited to) bump cap, safety steel toe shoes and safety glasses. * Must adhere to Good Manufacturing Practices (GMPs). At Mark Anthony, we exist to Unearth the Extraordinary: Our Purpose is not just a statement; it is a call to action that binds us together and ignites our passion for making a difference. It is the driving force behind why we do what we do every single day, connecting our global organization across all business units, roles, and locations. We are: Best in Our Craft We set the standard with a pursuit of excellence that can be found in everything from our products and processes to our plants and people. Ambitiously Curious We stay curious, dreaming big and navigating the unknown with an enduring belief in better. Made With Humility We bring humility, authenticity, fun, and support to every collaboration and celebrate wins as a team. Daringly Disruptive We disrupt the status quo, moving fast to seize opportunities and acting scrappy to stay ahead of industry giants.

Mark Anthony Group is an entrepreneurial drinks company, built from the ground up by thinking differently, innovating and doing the unexpected. Our company is rooted in family values, a bold vision and relentless determination to continuously raise the bar and make a positive difference in consumers' lives. Founded in 1972, we've grown organically from a one-person import wine business into an international drinks company whose hallmarks include a portfolio of luxury wineries and iconic beverage brands, including White Claw Hard Seltzer, Mike's Hard Lemonade, Cayman Jack and Más+ by Messi™. Role Purpose: Mark Anthony Brewing Inc. is hiring a PACKAGING OPERATOR responsible for monitoring process equipment, basic troubleshooting of any unforeseen process events, and ensuring that Safety and Quality are at the forefront of all activities. The PACKAGING OPERATOR will be cross trained in multiple areas and will be qualified to complete tasks in the various areas of packaging, sanitation, quality, and maintenance. Accountabilities & Impact: Ensure continuous operation of process equipment through active process monitoring and troubleshooting. Effectively communicate job knowledge and process changes with team members and management thru various forms of daily communication (shift handover meeting, daily production meetings, email, action logs, work orders, etc). Perform quality inspection of product using basic lab equipment and SOPs as a guide. Complete and maintain written documentation certifying completion of inventory checks, quality inspections, sanitation requirements, batch and blending production following SOP's, and basic maintenance tasks. Maintain sanitation and lubrication of machinery, equipment, storage bins, workstations, etc. Report safety and/or equipment issues to leadership. Skills & Experiences Needed: High School diploma or equivalent required. 1+ years of manufacturing experience. Demonstrated experience using computers and software skills such as MS office. Must be at least 21 years of age Working conditions: Fast-paced and constantly changing work environment Shift work including days, evenings, overnight shifts, and up to 12 hrs. Overtime including weekends and holidays as needed Ability to lift 50 lbs. Ability to stand/move up to 8-12 hours per day. Ability to ascend/descend stairs throughout shift. Must wear Personal Protective Equipment (PPE) including (but not limited to) bump cap, safety steel toe shoes and safety glasses. Must adhere to Good Manufacturing Practices (GMPs). At Mark Anthony, we exist to Unearth the Extraordinary: Our Purpose is not just a statement; it is a call to action that binds us together and ignites our passion for making a difference. It is the driving force behind why we do what we do every single day, connecting our global organization across all business units, roles, and locations. We are: Best in Our Craft We set the standard with a pursuit of excellence that can be found in everything from our products and processes to our plants and people.​ Ambitiously Curious We stay curious, dreaming big and navigating the unknown with an enduring belief in better.​​ Made With Humility We bring humility, authenticity, fun, and support to every collaboration and celebrate wins as a team. Daringly Disruptive We disrupt the status quo, moving fast to seize opportunities and acting scrappy ​to stay ahead of industry giants.​

Since 1961, Precoat Metals (**************** has been setting the standards in the coil coatings industry worldwide. We are able to achieve a "culture of excellence" thru the hard work and talent of the people on our team. Job Description We currently have openings in various positions on our production lines. Pay ranges from $21.09 to $25.95 per hour. The experience you have may make you a perfect fit to join our team at our Columbia, SC plant. You will be called upon to assist with, and may be assigned work in, any area of the plant, including coating line, cut to length line, embosser, slitter, shipping, receiving, paint vault, and packaging. As an operator, you will need to read, comprehend and interpret production schedules and paint sheets. Additionally, you will need to maintain a clean and organized work area according to 6s standards. Some of our openings are summarized below: Coater Operators Applies coatings to raw material according to customer specifications Accurately measures and records paint viscosity Applies knowledge of volume solids and resins to coating processes Sets roll speeds for specific vendor/resin systems Inspects risers, headers, nozzles, mist sprays, etc. to ensure they are working properly Maintains adequate levels of paint in pan and paint curtain Properly adjusts strip guide Quickly analyzes application defects and problems and takes appropriate corrective actions Accurately records paint usage by order and container traceability Adjusts catenary to minimize strip drags in the ovens Efficiently operates hold down buttons to coat wavy edges Starts and shuts down ovens Assists line operators with stitching coil strips together Entry Operators Coordinates the line entry activities of material allocations. Loads the entry coil carts with proper coils. Makes micrometer gauge checks and width and appearance checks, and reports any discrepancies form established standards to the shift supervisor. Reports coil identification information to proper personnel in proper sequence and keeps the records associated with this position. Operates the entry operator stations to properly charge coils into the coating line according to expectations and set procedures. Monitors material during uncoiling and leaving the entry section, along with the total plant activities. Accurately calculates footage and/or weights for specific job. Effectively runs coating line tension leveler and makes adjustments to achieve appropriate sheet shape. Communicates verbally and in writing with other departments of the plant concerning plant operations. Operates line controls, often using both hands simultaneously. Assists receiving Crane/Material Handler in unpacking coils to be loaded onto the coating line. Check coils for passivation. Inputs and retrieves information to and from the AS/400 main frame and the IPM systems Operations Support Retrieves and transports bare coils and maintains flow of metal to lines by safely operating cranes, fork lifts, and upenders without damaging material or equipment. Trims, packages and bands finished coils according to customer specifications using proper skids, bands, pads, and wrapping materials. Inspects coils and identifies and reports defects. Reads and interprets production schedules. Accurately identifies proper skid and package specified on schedules. Reads and accurately records coil weights, order numbers, etc. Shipping Clerk Identify, schedule, and ship materials according to specifications. Loads or unloads received or shipped coils onto or off of trucks Schedules shipping appointments with dispatchers and logistics companies, updating on an outlook calendar Qualifications As the selected candidate, you will need a high school level reading and writing, visual acuity to read labels, meters, gauges, documents and instructions, in addition to the following: Ability to read and comprehend written materials such as schedules, SOPs, work rules, etc. Ability to effectively communicate with all members of team. Ability to safely operate small manual and electric hand tools. Available to work up to 12 hours per day on rotating shifts, that could include weekends and holidays. Additional Information Excellent Benefits Day 1 We are an Equal Opportunity Employer. Precoat Metals is a Drug Free Workplace

Job Description ESSENTIAL DUTIES AND RESPONSIBILITIES: Manually place individual tortillas from stacks onto platen/conveyor at standard speed Place tortillas in the same direction and right side up on platen/conveyor Perform consistent placement of tortillas on platen/conveyor Inspect tortillas for foreign objects and quality defects Remove, rework or discard product found to be out specifications. Be able to “throw” tortillas at company standards of pace rate and placement quality. Inspect product for quality defects and remove out of spec product. Regular and dependable attendance and punctuality is an essential function of this position Perform in a fast paced environment, maintain production and quality requirements. Maintain knowledge, understanding and adherence to safety policies, USDA, GMPs, QA, HACCP, Sanitation rules and regulations, and RUIZ FOODS company policies. Regular and dependable attendance and punctuality is an essential function of this position. Maintain knowledge, understanding and adherence to safety policies, USDA, QA, HACCP, and Sanitation rules and regulations, and company policies. Throw out waste and rinse trash containers for reuse. Move trash containers to waste area. Removes food debris from conveyor catch pan and places it in designated inedible containers. May enter discarded waste information into the company computer system. Clean out debris from drain basket. May wash conveyor equipment as needed. May rinse, sweep and squeegee floors. Setup and position fatigue mats and stools for other workers at individual workstations as needed. Refill sanitizing containers as needed. Responsible for supplying food products to each line to maintain food production. Manually supply ingredients to filler machines as needed to keep up with food production rate. Manually refill hopper with buckets of food for pump operation. Manually supply ingredients to filler machines as needed to keep up with food production rate. Perform all other duties as assigned. #LI-DNI

NORMAL DUTIES include may include the following: Monitors quality and specifications incoming stock for flute, size; score position, color, label, label direction, print, and print direction and condition. Monitors quality and specifications of plates and drawings. Monitors and adjusts the pH and viscosity of the ink used for each job. Mounts cutting dies, printing plates Pulls rolls per the factory order. Sets side gates, belts, stacker attachments per factory order Places machine in time. Sets caliper for board and printing plate(s). Maintains information in the computer system in a timely manner. Makes adjustment needed to ensure product being produced meets all quality standards. Reports any inability to meet quality standards or setup standards to machine center Reports any maintenance problems to the machine center supervisor and assist as needed in repair of machine center. Prepares for next order while monitoring current production, as time will allow. Performs quality checks on product before and during production to ensure quality standards are met and maintained during production. Must be able to operate sit down forklift. The Assistant Operator will also perform any other duties as assigned. QUALIFICATION REQUIREMENTS: The requirements listed below are representative of the knowledge, skill, and/or ability required. EDUCATION and/or EXPERIENCE: High School diploma or general education degree (GED); or five years related experience and/or training; or equivalent combination of education and experience. LANGUAGE SKILLS: Ability to read and interpret written documents such as safety rules, operating and maintenance instructions, factory orders, and procedure manuals. Ability to write routine reports and correspondence. Ability to communicate effectively. MATHEMATICAL SKILLS: Ability to add, subtract, multiply, and divide in all units of measure (English and Metric systems), using whole numbers, common fractions, and decimals. Ability to read an English and metric system tape measure. REASONING ABILITY: Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization may exist. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. PHYSICAL DEMANDS: The physical demands described here are representatives of those that must be met by an employee to successfully perform normal job functions. While performing the duties of this job, an individual is regularly required to stand; use hands to finger, handle, or feel objects, tools, or controls; reach with hands and arms; talk or hear; and taste or smell. An individual frequently is required to stoop, kneel, crouch, or crawl. An individual must regularly lift and/or move up to ten pounds, frequently lift and/or move up to twenty-five pounds, and occasionally lift and/or move up to fifty pounds. Specific vision abilities required by this job include close vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an individual encounters while performing the normal job functions. Reasonable accommodations may be made to enable individuals with disabilities to perform the normal job functions. While performing the duties of this job, an individual regularly works near moving mechanical parts. The employee is occasionally exposed to wet and/or humid conditions and temperature variations. The noise level in the work environment is usually moderate. Reasonable accommodations may be made to enable individuals with disabilities to perform the normal job functions.

About the Role: Autonomy Staffing is looking for dependable and hardworking General Production Workers to join our team in Summerville, SC. This is an excellent opportunity for individuals who thrive in fast-paced environments and are eager to contribute to the production process. Key Responsibilities: Operate machinery and equipment as directed. Assist in the production and assembly of products. Follow safety protocols and maintain a clean work environment. Perform quality checks to ensure products meet standards. Collaborate with team members to meet daily production goals. Load and unload materials as required. Qualifications: Previous experience in a production or manufacturing environment is a plus but not required. Ability to stand for long periods and perform repetitive tasks. Strong attention to detail and commitment to quality. Reliable transportation to and from the worksite. Must be punctual, reliable, and a team player. What We Offer: Competitive hourly wage. Opportunities for overtime and career advancement. A positive and team-oriented work environment.

The General Production Operator must be willing and capable of learning all aspects of spiral weld pipe manufacturing. The Operator must have the ability to collaborate with the team while possessing the aptitude to collect data and independently make good decisions in real time based on those facts. The Operator must be self-motivated with the leadership skills to inspire others and have the perceptive skills to identify inconsistencies in product and equipment and develop solutions for them. Having an uncompromising commitment to safety is a requirement. Training on specific equipment and processes will be provided. Review's work orders or takes direction from the leadership team to determine what jobs are required, and in what order to run them. Assist the leader in the set-up of the machine. Reads, understands, and interprets tape measure, pi tape, drawings, specification boundary, digital readouts. Coordinates with pipe moving personnel and/or crane operators to move pipe onto test stand. Performs final inspection and measurements of pipe, and documents results on final expansion log. Verifies that all positions have been checked and ready to start. Ensures machine is kept running by observing and correcting problems that arise. Monitor's quality of alignment and weld process, pipe specifications, cement lining, and application of coating. Performs preventive maintenance and minor repairs to machinery and equipment. Refers electrical and hydraulic problems to maintenance department for resolution. Develops, recommends, and implements measures to improve production methods, equipment performance, and quality of the product. Adheres to all safety rules and brings safety issues to the attention of department leadership or safety manager. Follows all work procedures, policies, and protocols. Performs other tasks instructed by leadership team. MINIMUM QUALIFICATIONS Must be physically able to perform the essential functions of the job, with or without reasonable accommodations. Must be able to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Must be able to read, write, and interpret simple documents and instructions, short correspondence, and memos. Must be able to effectively present information in one-on-one, small group situations to employees, and members of leadership. Must be able to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Must be able to compute ratio and percent and to interpret bar graphs. Must be able to read and interpret linear and circumference measurements using tape measures and calipers. Must be able to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Must be able to read, interpret, and carry out instructions furnished in written, oral, or diagram form. Must be able to deal with problems involving several concrete variables in standardized situations. Must be able to operate computer controlled hydrostatic test stand, including reading and interpreting console indicators and gauges, and using control console to conduct tests. Must be able to read, write and effectively communicate in English. Must have the willingness to rotate to different positions as requested by manager or team leader. ESSENTIAL PHYSICAL FUNCTIONS The employee is regularly required to stand, walk, use hands to finger, handle, or feel and talk or hear. The employee is frequently required to stoop, kneel, crouch, or crawl. The employee is occasionally required to sit, reach with hands and arms, and climb or balance. The employee must regularly lift and/or move up to 10 pounds, frequently lift and/or move up to 25 pounds and occasionally lift and/or move up to 100 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, and ability to adjust focus.