Quality assurance specialist jobs in Daytona Beach, FL - 35 jobs

Location Overview: Onsite position at Halifax Health | Brooks Rehabilitation - 303 N Clyde Morris Blvd, Daytona Beach, FL 32114 This position will report to the Director of Hospital Operations and work closely with the System Director for Quality & Patient Safety. The Quality Analyst will apply performance improvement and quality principles to outcome and process measures within the Inpatient Rehabilitation Facility (IRF) care setting. This position will also support interdisciplinary teams to achieve the Commission on Accreditation of Rehabilitation Facilities (CARF) accreditation/redesignation, provide onboarding education to the therapy department, and work collaboratively with IRF leaders to promote CARF survey readiness. This role will help create and collaborate action plans for process improvement for any required findings for hospital site surveys. Job Responsibilities: Quality Analyst responsibilities: * Assist with communication to the interdisciplinary team either through discussion or in writing (e.g., formal queries) regarding missing, unclear, or conflicting health record documentation, and clarifies the information as warranted. * Educates providers about identification of disease processes that reflect complexity and acuity to facilitate accurate application of code sets. * Gathers and analyzes information pertinent to documentation findings and outcomes and uses this information to develop action plans for process improvements. * Analyzes quality trends and collaboratively creates action plans for performance improvement surrounding acute care transfers/hospital readmissions with consideration at the hospital, unit and patient specific trend levels. * Patient safety indicators including falls, healthcare associated pressure injuries, infections * Functional improvement outcomes * Other quality measures as identified or regulated * Identifies performance improvement opportunities and develops processes, procedures, and policy to support these initiatives. * Evaluates workflow processes utilizing lean strategies, process mapping, and performance improvement principles to identify opportunities and efficiencies. * Completes audits to ensure processes and policies are being followed CARF Accreditation Responsibilities * Perform gap analysis evaluation on a regular schedule to determine compliance with CARF standards. * Demonstrate expert knowledge of regulatory compliance of IRF hospital CARF programs. * Record and maintain documentation to validate compliance with program standards. * Coordinate the interdisciplinary teamwork and organization of data collection by effectively collaborating with clinical leadership teams. * Provides on-site support as the lead for surveys related to regulatory compliance ORGANIZATIONAL/SERVICE MANAGEMENT * Submits required reports in a timely and professional manner. * Identifies variances to meeting departmental goals. * Proactively initiates action plans and develops controls to track variances. * Demonstrates knowledge of Inpatient Rehabilitation Hospital regulatory rules and regulation relating to the industry. OPERATIONAL MANAGEMENT * Develops and maintains effective working relationships with peers, clinical staff, superiors, and external customers. * Communicate regularly with superiors, peers, and other staff. * Always maintain a pleasant and professional demeanor, ensuring behavior is consistent with Brooks' values and policies. Job Qualifications: * Associates degree required * Quality certification (CPHQ, Lean, Six Sigma) preferred; or ability to acquire * Proven analytical and problem-solving abilities * Proven documentation skills * Ability to effectively prioritize and execute tasks in a high-pressure environment * Good written, oral, and interpersonal communication skills * Highly motivated and self-directed * Keen attention to detail * Team-oriented and skilled in working within a collaborative environment Thriving in a culture that you can be proud of, you will also receive many employee benefits such as the following: * Competitive Pay * Comprehensive Benefits package * Vacation/Paid Time Off * Retirement Plan and Match * Employee Discount Program * Educational Assistance * Professional Development Programs Disclaimer: This job description describes the general nature and level of work only. It is not an exhaustive list of all responsibilities, duties, and skills. Duties, responsibilities, and activities may change, or new ones may be assigned at any time with or without notice.

Job Description About Company: At Frontline Insurance, we are on a mission to Make Things Better, and our employees play a pivotal role in achieving this vision. We strive to provide high quality service and proactive solutions to all our customers to ensure that we are making things better for each one. What makes us different? At Frontline Insurance, our core values - Integrity, Patriotism, Family, and Creativity - are at the heart of everything we do. We're committed to making a difference and achieving remarkable things together. If you're looking for a role where you can make a meaningful impact and grow your career, your next adventure starts here! Learn more about Frontline Insurance here. About the Role: The Claims Quality Assurance Specialist plays a critical role in ensuring the accuracy, compliance, and efficiency of the claims processing function within the organization. This position is responsible for conducting detailed audits and reviews of claims to identify errors, inconsistencies, and opportunities for process improvement. The specialist collaborates closely with claims adjusters, underwriters, and other stakeholders to provide actionable feedback and support training initiatives that enhance overall claims quality. By maintaining rigorous quality standards, this role helps to minimize financial risk and improve customer satisfaction. Ultimately, the Claims Quality Assurance Specialist contributes to the integrity and reliability of the claims operation, supporting the organization's commitment to excellence and regulatory compliance. Minimum Qualifications: Bachelor's degree in Business, Insurance, Risk Management, or a related field. Minimum of 3 years of experience in claims processing, quality assurance, or a related insurance function. Strong knowledge of insurance claims procedures, industry regulations, and compliance standards. Proficiency in using claims management software and Microsoft Office Suite. Excellent analytical, organizational, and communication skills. Preferred Qualifications: Professional certifications such as AIC (Associate in Claims) or CPCU (Chartered Property Casualty Underwriter). Experience with data analytics tools and techniques to support quality assurance initiatives. Familiarity with regulatory requirements specific to the insurance industry in the United States. Demonstrated ability to lead quality improvement projects or initiatives. Experience working in a remote or hybrid work environment. Responsibilities: Perform comprehensive audits of claims files to assess accuracy, completeness, and adherence to company policies and regulatory requirements. Identify trends and root causes of errors or discrepancies in claims processing and recommend corrective actions to management. Collaborate with claims teams to provide feedback, coaching, and training aimed at improving claims quality and operational efficiency. Develop and maintain quality assurance documentation, including audit checklists, reports, and performance metrics. Monitor compliance with internal controls and external regulations, escalating issues as necessary to ensure timely resolution. Skills: The Claims Quality Assurance Specialist utilizes analytical skills daily to review and interpret claims data, identifying discrepancies and areas for improvement. Strong communication skills are essential for providing clear, constructive feedback to claims teams and collaborating with various departments to implement quality initiatives. Proficiency with claims management software and data analysis tools enables the specialist to efficiently conduct audits and generate detailed reports that inform decision-making. Organizational skills are critical for managing multiple audits simultaneously while maintaining accuracy and meeting deadlines. Additionally, knowledge of regulatory standards ensures that all claims processes comply with legal requirements, reducing risk and enhancing the organization's reputation.

**Be visionary** Teledyne Technologies Incorporated provides enabling technologies for industrial growth markets that require advanced technology and high reliability. These markets include aerospace and defense, factory automation, air and water quality environmental monitoring, electronics design and development, oceanographic research, deepwater oil and gas exploration and production, medical imaging and pharmaceutical research. We are looking for individuals who thrive on making an impact and want the excitement of being on a team that wins. **Job Description** **Teledyne Marine** is a group of leading-edge undersea technology companies that have been assembled by Teledyne Technologies Incorporated. Through acquisitions and collaboration, over the past 10 years Teledyne Marine has evolved into an industry powerhouse, bringing the best of the best together under a single umbrella. With technologies divided into 5 core segments; Imaging, Instruments, Interconnect, Seismic and Vehicles, Teledyne Marine sales staff can address not only brand level solutions, but turn-key, customized systems that leverage our full range of technology. Our goal is to provide one-stop purchasing capability, world-wide customer support, and the technical expertise to solve our customer's toughest challenges. A Sea of Solutions.....One Supplier. For more information, visit our website at ********************** . **Position Overview:** This position is responsible for ensuring that products being delivered from Teledyne meet a high level of quality. This position is responsible for inspecting components, sub-assemblies, and final products prior to moving these to the next step in the manufacturing process or shipment to the customer. As an entry level position, it is expected that there will be a fair amount of oversight into the work performed by the area lead and more senior employees. **Essential Duties and Responsibilities:** + Perform Final Inspection of product to relevant documentation + Perform In-Process Inspection of product to relevant documentation + Records data as requested from inspection results (defect tracking, check sheets, etc.) + Communicate non-conformances as necessary to Quality Supervisor, Manufacturing Leads/Supervisors + Process MRBs (Material Review Board) + Process audits/In-process quality reviews + Work overtime / weekends as required to meet business demands **Education and Experience:** + High School Diploma or GED + Minimum one of the following: + One year technical certificate + 2 years relevant work experience **Job Knowledge, Skills and Abilities:** + Ability to work with changing demands in a fast-paced environment + Excellent communication skills with both internal and external customers + Knowledge of MS Office to include Word, Excel, PowerPoint, Outlook + Experience in reading technical drawings + Experience with Adobe software + Product knowledge preferred + Solder experience preferred + Quality experience preferred **Due to the type of work at the facility and certain access restrictions, successful applicants must be a "US Person" (US Citizens, US Nationals, lawful permanent residents, asylees or refugees).** ************************ _What can Teledyne offer YOU?_ A Competitive Salary & Benefits Package Excellent Health, Dental, Vision Paid Vacation Time Paid Sick Time Life Insurance Benefits Paid Holidays 401(k) Eligibility Employee Stock Purchase Plan Fitness Challenges Educational Tuition Reimbursement Employee Fun Events throughout the year Teledyne and all of our employees are committed to conducting business with the highest ethical standards. We require all employees to comply with all applicable laws, regulations, rules and regulatory orders. Our reputation for honesty, integrity and high ethics is as important to us as our reputation for making innovative sensing solutions. Teledyne is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age, or any other characteristic or non-merit based factor made unlawful by federal, state, or local laws. You may not realize it, but Teledyne enables many of the products and services you use every day **.** Teledyne provides enabling technologies to sense, transmit and analyze information for industrial growth markets, including aerospace and defense, factory automation, air and water quality environmental monitoring, electronics design and development, oceanographic research, energy, medical imaging and pharmaceutical research.

Manager Quality Assurance MRO Operations Department: Quality Assurance Employment Type: Full-Time, Salaried Avocet Aviation Services is a growing FAA-certificated MRO providing aircraft maintenance, repair, and overhaul services to commercial and specialized aviation operators. We pride ourselves on safety, compliance, operational excellence, and a collaborative culture that values professionalism and continuous improvement. Position Overview Avocet Aviation Services is seeking a Manager of Quality Assurance (MQA) to lead and oversee our Quality Assurance system within a FAA Part 145 MRO environment. This role provides system-level oversight of quality, compliance, audits, and continuous improvement while maintaining independence from maintenance production activities. Key Responsibilities Lead and maintain the Quality Management System (QMS) Ensure compliance with FAA regulations, company policies, and customer requirements Establish and manage the Internal Evaluation and audit programs Conduct and support internal, external, customer, and FAA audits Analyze quality data, trends, and corrective actions Support quality-related training initiatives Coordinate manual control activities with the Director of Quality Control Promote a strong quality and safety culture Qualifications FAA certificate issued under 14 CFR Part 65 Strong knowledge of FAA Part 145 regulations Experience in quality assurance, auditing, or compliance within an aviation MRO or regulated environment Strong analytical, documentation, and communication skills Preferred Prior QA or compliance leadership experience in a Part 145 Repair Station Audit, SMS, or quality systems training Note: This position exercises functional supervision over quality assurance activities and audits but does not supervise maintenance production or approve return-to-service activities. Why Join Avocet Aviation Services Work in a safety-driven, FAA-compliant MRO environment Being part of a growing organization with opportunities to influence processes and outcomes Collaborate with experienced aviation professionals across engineering and operations Competitive compensation and benefits package Health Insurance, Dental, Vision, & 401k PTO and Holiday Plan Apply Now If you are an aviation professional with a passion for engineering, planning, and operational excellence, we invite you to apply for Aviation Engineer position and join the Avocet Aviation Services Team. Apply at: ******************************************* Equal Employment Opportunity (EEO) Avocet Aviation Services is an Equal Employment Opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetic information, veteran status, or any other protected status under applicable law. FAA / DOT Drug & Alcohol Program Compliance This position may be subject to the FAA and DOT Drug and Alcohol Testing Program in accordance with 14 CFR Part 120 and 49 CFR Part 40. Employment is contingent upon successful completion of pre-employment drug testing and continued compliance with all applicable testing requirements. Safety & Regulatory Compliance All employees are required to comply with FAA regulations, company policies, safety procedures, and Quality Management System (QMS) requirements. Disclaimer This job description describes the general nature of the position and is not intended to be an exhaustive list of duties. Responsibilities may be modified as business needs require.

Job DescriptionBenefits: 401(k) matching Competitive salary Dental insurance Health insurance Paid time off Vision insurance CURIS System is a growing Bio-decontamination company specializing in integrated systems for the Life Sciences, BioPharma and Healthcare facilities and installing bio-decontamination equipment nationwide. Our team is growing due to the principles of quality service, integrity, transparency, and hard work focused on superior customer satisfaction. We are looking for a Project Lead who is willing and able to manage while working with a small design and implementation teams. Candidates are expected to have a construction background and familiarity with electrical work, building regulations, structural steelwork, and reading blueprints/schematics. CURIS is looking for a Quality Manager who has expertise in mechanical / electrical/ pneumatic fields. This candidate must be a hardworking individual talented at investigating new applications and working in cross-functional teams. They must be enthusiastic and eager to contribute to team success through hard work, attention to detail and excellent organizational skills. Motivated to learn, grow, and excel in any industry. This position would be responsible for the following rolls and responsibilities. Verify production and special projects compliance with quote/POs, internal submittal, and design drawings Assist in development of quality goals for newly initiated R&D projects to inform the design process towards zero-defect product release Understand pneumatic systems assembly/diagnostics and network/hard wired logic control systems Containment systems design & testing, operator exposure testing, pressure decay and leak testing Assist sales team with technical backup at their presentations, pre/post sale. Liaison between engineering and production departments, facilitating communications and maintaining appropriate awareness on project developments to facilitate quality processes and forecasting Develop, configure, and optimize quality processes from inception to start up and validation or certification in accordance with industry standards Prepare and present technical information to team members and management Maintain a working knowledge of government and industry quality codes and standards Verify compliance with detailed process documentation and operational instruction for work being conducted in the manufacturing areas and on-site using SOPs. Assist and advise on the creation or updating of non-existent or outdated policies. Prepare, check, and coordinate documentation to corroborate equipment design and application to include (but not limited to) commissioning items, FAT, SAT, IQ/OQ/PQ, calibration and maintenance deliverables, user manuals, and troubleshooting guides Use Microsoft Word and other software tools to create documents and other communications. Demonstrate respect, friendliness, and willingness to help wherever needed. Support customer service efforts by communicating with customers as needed in a friendly, efficient manner following outlined steps of service Aseptic process cycle development Calibration, airflow system validation, 3rd party equipment integration Evaluate existing procedures and make proactive adjustments to meet changing demands Use critical thinking to break down problems, evaluate solutions and make decisions which mutually support quality and business objectives Support and mentor project/electrical/mechanical design teams & production/site teams by providing a quality perspective for incorporation early in the design process Involve all team members to ensure quality is seen as individually driven & maintained in a team environment Actively track equipment troubleshooting requests to capture relevant quality KPIs based on issues experienced in field or via RMA Create standard validation protocols for decontamination services and organic laboratory services Commission /Validate/Service Pharmaceutical Aseptic and containment equipment Ideal background would include Electrical engineering management, commissioning engineer, project manager with 5+ years' experience. Committed to providing unprecedented technical support to clients. May have recent experience in Pharma commissioning & consultancy. Additional Skills may include Calibration of Pressure transmitters, Magnehelic gauges, Airflow sensors, Flow meters Airflow balancing within facilities and standalone downflow booth systems with airlocks Proficient with measurement, calibration, and test equipment Detail oriented, good organizational traits Knowledge of general safety and hygiene practices Strong analytical, problem-solving skills Strong written and verbal communication skills Ability to work in a team-oriented environment Quality Assurance Experience in a clean room environment and aseptic manufacturing environment Mechanically inclined with troubleshooting aptitude Knowledge of manufacturing methods, process & quality standards (ISO 9001, 21CFR Pt11 Electronic records & Signatures) Electrical/Mechanical Blueprint Reading P&ID reading for verification Process Flow Diagrams HEPA Filter Testing Particle Counting Pressure Decay/Leak Testing DC & Variable Speed Drive Systems Electrical System Diagnosis Commissioning/Validation of Containment/Aseptic Systems Customer Service & Aftersales Support Document Writer for policies and cause and effect documentation Compliance Within cGMP Environment Microsoft Excel/Word/Project/Powerpoint Compliance With NEC Electrical Codes/ATEX/UL Electrical Panel Building knowledge basic for verification

Job Title: Quality Assurance Manager (Web Platforms) Location: Remote - Candidates must live in Florida Magellan Solutions USA is a veteran-owned Call Center and BPO company with a track record of performance. Magellan is actively pursuing an opportunity to provide a full-time QA Manager for a client in Florida. Role Overview The QA Manager is responsible for defining, implementing, and enforcing quality assurance standards across large-scale, high-traffic websites. This role ensures that all digital properties meet strict requirements for performance, accessibility, SEO integrity, security, and usability prior to launch and throughout ongoing maintenance. Key Responsibilities Own the QA strategy for multi-site CMS platforms (e.g., WordPress, Drupal). Define and maintain test plans covering: Functional testing Cross-browser and cross-device testing Performance and load testing Accessibility (WCAG 2.1 AA) SEO validation · Lead QA efforts for: New feature releases Content migrations Emergency or crisis messaging deployments Coordinate with development, SEO, UX, and project management teams to resolve defects. Ensure Core Web Vitals meet performance thresholds prior to release. Establish pre-launch and post-deployment QA checklists. Oversee defect tracking, prioritization, and resolution SLAs. Validate analytics, tracking, and tag deployments. Produce QA reports for stakeholders and leadership. Required Qualifications 5+ years in QA for web development projects. Experience managing QA for high-traffic or enterprise websites. Strong understanding of: Web standards CMS-based platforms Accessibility compliance SEO best practices Experience with QA tools (e.g., Jira, TestRail, BrowserStack, Lighthouse). Excellent documentation and communication skills. Preferred Qualifications Government, tourism, or public-sector digital experience. Familiarity with Core Web Vitals and SEO auditing tools. Experience supporting crisis or emergency site updates.

Full-time Description JE Technology Solutions is seeking an experienced Quality Assurance Manager to lead and continuously improve the company's Quality Management System (QMS) while championing a Zero Defects culture across engineering, manufacturing, and supplier networks. This role serves as the ISO 9001 Management Representative, ensures product quality and compliance throughout all phases of fabrication and manufacturing, and strengthens customer confidence in JE Technology's aircraft maintenance safety platforms and related metal fabrication products. The Quality Assurance Manager provides strategic and hands-on leadership to the Quality Department and partners closely with Engineering, Operations, Supply Chain, and customers to drive operational excellence, safety, and continuous improvement. Essential Duties & Responsibilities · Quality Management System (QMS) Leadership · Own, maintain, and continuously improve the company's ISO 9001-compliant Quality Management System. · Serve as the Management Representative to certification bodies, customers, and auditors. · Administer document control and change management processes, including oversight of the QMS SharePoint site. · Lead integration of acquired organizations or new programs into the existing QMS. · Ensure compliance with internal procedures, customer requirements, and regulatory standards. Audit, Compliance & Corrective Action · Plan and execute internal, supplier, and customer audits. · Lead root cause analysis, corrective and preventive actions (CAPA), and verify effectiveness and closure. · Review contract deliverables, customer submissions, and quality records to ensure conformance. · Ensure adherence to safety, security, and compliance requirements across manufacturing and testing activities. Quality Oversight, Inspection & Testing · Establish and maintain inspection and testing procedures for fabrication, welding, machining, assembly, and final product verification. · Oversee calibration, inspection, and test equipment to ensure accuracy and compliance. · Monitor and analyze defects, nonconformances, scrap, rework, and warranty issues. · Provide quality oversight throughout all phases of manufacturing, including vehicle or complex program builds. Supplier Quality Management · Lead and improve the supplier quality program, including risk assessment, audits, and improvement initiatives. · Partner with Supply Chain to ensure supplier compliance with quality and contractual requirements. · Drive structured supplier corrective actions and long-term quality improvements. Performance Metrics & Continuous Improvement · Define, track, and report quality KPIs such as first-pass yield, defect trends, audit results, and customer returns. · Conduct deep-dive analyses on systemic quality issues and implement preventive solutions. · Champion Lean Manufacturing, Six Sigma, and 5S initiatives to improve quality, efficiency, and consistency. · Promote a culture of accountability, compliance awareness, and continuous improvement. Customer & Cross-Functional Engagement · Serve as the primary point of contact for customer quality concerns and escalations. · Partner with Engineering, Operations, and Project Management to integrate quality throughout the product lifecycle-from design through shipment. · Ensure timely communication, investigation, and resolution of customer quality issues. People Leadership & Development · Lead, coach, and develop the Quality Department, including Quality Engineers, Inspectors, Technicians, and QA Coordinators. · Provide training on quality standards, procedures, and best practices to both hourly and salaried employees. · Foster a strong quality mindset, professional growth, and high-performance culture within the team. Other Duties · Support mission assurance, reporting requirements, and other responsibilities as assigned to meet business needs. · Directly supervises the Quality Department staff, including Quality Engineers, Inspectors, and Quality Technicians. · Responsible for performance management, training, and professional development of the team. Core Competencies: · Leadership and People Development· Analytical and Problem-Solving Skills· Continuous Improvement Mindset· Root Cause Analysis and Corrective Action· Communication and Collaboration· Attention to Detail and Accuracy· Technical Proficiency in Quality Tools and Systems· Customer Focus Requirements · Bachelor's degree with a focus on Quality, Operations Management, Engineering, or related field. · Bachelor's degree with 8+ years of relevant experience or Master's degree with 6+ years of relevant experience (equivalent experience may be considered). · Strong working knowledge of ISO 9001:2015 (auditor and/or auditee experience preferred). · Demonstrated experience leading audits, closing findings, and implementing robust corrective actions. · Experience in manufacturing environments involving metal fabrication, welding, machining, and assembly. · Ability to read and interpret engineering drawings, specifications, procedures, and work instructions. · Proven ability to define quality metrics, analyze trends, and drive measurable improvement. · Strong leadership, communication, negotiation, and influence skills (with and without authority).· Experience developing procedures, processes, and training programs.· Proficiency in Microsoft Office (Excel, Word, PowerPoint; MS Project a plus).· Willingness to travel up to approximately 20%, domestic and occasional international. Preferred Qualifications · AWS Certified Welding Inspector (CWI). · Experience with ERP systems. · Aerospace, aviation support equipment, or regulated manufacturing experience. · Lean Six Sigma certification or equivalent continuous improvement training. JE Technology Solutions, Inc. is a Zero Tolerance Drug Free Workplace. All offers of employment by JE Technology Solutions, Inc. are contingent on completion of a drug test within 2 business days of your offer acceptance and a background check with results in compliance with company policy. Upon hire, JE Technology Solutions, Inc. uses E-Verify to verify employment eligibility for all roles based in the United States. JE Technology Solutions, Inc. is an Equal Opportunity Employer. All applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status.

Required Skills API testing with REST/SOAP Integration Testing Strong SQL Experience Experience with Hybrid-Agile Methodology Experience with Defect Tracking and Test Management tools like ADO,JIRA etc Documentation ,Communication and collaboration across the multiple Teams. Preferred Skills Responsibilities Work effectively within a hybrid agile environment, managing timeline extensions, escalating issues. Communicate Effectively for status reviews, discussing progress, risks, impediments to maintain project quality. Strong analytical skills: Demonstrated ability to interpret complex requirements, solve problems, and propose innovative solutions. Experience with API testing: Proficient in designing, executing, and automating tests for REST/SOAP APIs; able to validate data, error handling, and security scenarios. Hands-on experience with end-to-end integration testing involving multiple stakeholders and platforms. Design and develop quality test cases from Business Requirement Documents. Solid understanding of project management principles and experience managing cross-functional teams. Familiarity with establishing and reviewing ITIL and SDLC processes. Effective written and verbal communication skills Proficiency with test management and defect tracking tools (e.g., ADO, Jira, TestRail, Postman etc). Experience working in hybrid agile environments. Certification in relevant QA, project management, or Agile methodologies (e.g., ISTQB) is preferred. Expected Deliverable(s) Test Case Writing and Execution Job Location : Lakemary, Florida, United States Latest Digital Insights BLOG Scaling Innovation with Lab as a Service: Turning Digital Transformation into Enterprise Value Innovation is no longer a long-horizon concept. It is a… Success Story A Leading Automotive SaaS Provider Revolutionizes Identity Management with… Apexon Enhances User Satisfaction 40% Increased System Resilience… Success Story Global Tech Giant Exponentially Increases Customer… Apexon leverages Agile and outcome-based delivery model to… White Papers The Future of BFSI: Generative AI… Building A Roadmap To Success Blog Beyond Testing: Engineering Resilient Systems with Hardware, Software… In today's hyper-connected digital world, true resilience requires more than… Services TAKE THE DEVOPS SELF-ASSESSMENT How can we help you? Please enable JavaScript in your browser to complete this form. Please enable JavaScript in your browser to complete this form. Multiple Choice * * Artificial Intelligence * Data & Analytics * Digital Engineering * Experience Name * First Last Business Email * Direct Phone Number Question or Message * Custom Captcha * = Checkboxes * privacy policy and terms and conditions)" aria-errormessage="wpforms-24789-field_29_1-error" checked='checked'>By checking this box, I agree to receive SMS messages about [Message Type] from Apexon at the phone number provided above. The SMS frequency may vary. Data rates may apply. Text HELP to ************** for assistance. Reply STOP to opt out of receiving SMS messages (privacy policy and terms and conditions) Lead Source *Lead SourceSearch - Organic Submit *************** Collapse All Quick Links Artificial Intelligence Agentic AI Generative AI Advanced Analytics, AI/ML Intelligent Automation Data & Analytics RegTech Data Visualization Microsoft Fabric Data Management & Governance Data Strategy Managed Data Services Data Engineering Digital Engineering Cloud Native Platform Engineering * Cloud Strategy * Cloud Migration * Cloud Enablement * Cloud-Native Development * Application Modernization * Site Reliability Engineering * DevOps * Chaos Engineering Application Development * Custom Application Development * Low-code/No-code Development * Interactive Experiences IoT Development * Connected Medical Devices Quality Engineering * Test Automation * Functional Testing * Performance Testing * Regression Testing * Security Testing * Intelligent Testing & Automation for Salesforce * Compatibility Testing * Selenium-Based Test Automation * IoT Testing * Wearable Testing * Visual Testing * Intelligent Testing * Service Virtualization Experience UI/UX * UX Workshops * UI/UX Design * UX Research-as-a-Service Digital Commerce * Ecommerce Enablement * Digital Experience * Managed Services Salesforce Customer Experience Employee Experience Enterprise Service Management Apexon, Copyright 2026. All rights reserved. * * * * * * SitemapGlossaryPrivacy PolicyTerms & Conditions

Major Functions The Division of Emergency Medical Services is seeking a Special Projects Coordinator-Quality Assurance Coordinator. This position is responsible for highly responsible administrative staff work coordinating and participating in special projects, research, and assignments for the EMS Division. This position is tasked with activities including, but not limited to, quality assurance review and analysis; medical records management; development of feedback tools and mechanisms for Volusia County Emergency Medical Service (VC EMS) crews. Illustrative Duties (Note: These are intended only as illustrations of the various type of work performed. The omission of specific duties does not exclude them from the position.) * Oversees the Quality Assurance program to ensure compliance with EMS staff responsible for performing Quality Assurance reviews. In addition, the Quality Assurance (QA) coordinator will review cases to make recommendations for corrective action to the EMS Training Officer, the Clinical Services Manager, and/or to the Volusia County EMS Medical Director. * Gathers and analyzes data to identify trends, inconsistencies, deviations, or other irregularities in a scientific manner. * Reads and comprehends documents, including medical records as well as cardiac monitor information, and concludes from those records whether the crew adhered to or deviated from local protocols and acceptable medical standard of care. * Identifies, designs, develops and executes a plan to address deficiencies for isolated problems or utilizing a broad approach for systemic problems. * Collaborates with VC EMS management and other system stakeholders to identify performance objectives and collaborates to improve the effectiveness of the delivery of medical care to patients. * Meets with EMS staff to provide Quality Assurance feedback and coordinates multi-directional feedback, which may include various command staff (i.e., battalion chiefs, division commanders, deputy chiefs, chief). * Administers and maintains demographics for the electronic patient care reporting software. * Assists and oversees the workflow between EMS Billing Office and Fire/EMS crews for ticket resurrection on an as-needed basis; may also need to coordinate obtaining crew attestation statements as requested by the EMS Billing Office. * Manages data and generates reports for the State of Florida, Volusia County Government and the EMS Division relating to Volusia County EMS. * Maintains a positive working relationship with other first response agencies and the EMS Medical Director's office. * Compiles data from multiple internal databases and provides presentations to both internal and external stakeholders. * Monitors and reports out performance metrics for various recognition programs (e.g., American Heart Association EMS Mission: Lifeline, etc.) * May serve as the representative for Volusia County EMS on internal and external committees. This includes regularly scheduled meetings at hospitals regarding Quality Assurance initiatives (i.e. Stroke, ST-elevation myocardial infarction (STEMI), trauma meetings.) * Maintains Quality Assurance program(s) that are being used by the EMS Division. When new software solutions are added, the incumbent may be considered the project lead on the program. * Assists in the administration of changes to the electronic patient care reporting software. * May assist with initial and continuing education with prehospital providers. * May be assigned to other county locations based upon operational needs. * Attends work on a regular and consistent basis. * Must adhere to Federal, State, County and Local ordinances. * Responds to emergency situations as appropriate. * Performs other duties as assigned. Minimum Requirements Graduation from high school or possession of GEDand seven (7) years' verifiable clinical experience as a paramedic and/or registered nurse in a prehospital (911) or emergency room setting. Experience in performing quality assurance activities in a prehospital (911) or hospital setting that includes feedback closure with healthcare providers may substitute for five (5) of the seven (7) years of required experience. OR Bachelor's degree in Business Administration, Public Administration, or related field and a combined minimum total of three (3) years' verifiable clinical experience as a paramedic and/or registered nurse in a prehospital (911) or emergency room setting. Experience in performing quality assurance activities in a prehospital (911) or hospital setting that includes feedback closure with healthcare providers may substitute for one (1) of the three (3) years of required experience. A comparable amount of education, training or experience may be substituted for the education. The preferred candidate, having met the requirements, will have experience working in various patient care reporting software solutions and demonstrate they can produce reports based on data reviewed. Must possess and maintain a valid driver's license at time of hire. Must possess a valid Florida driver's license within 30 days of hire and maintain thereafter. Knowledge, Skills & Abilities * Knowledge of Microsoft 365. * Knowledge of the principles and practices of public administration. * Knowledge of federal, state and local laws, regulations and policies specific to all facets of emergency medical services delivery. * Knowledge of research techniques and availability of current information. * Knowledge of the constraints, processes and Health Insurance Portability and Accountability Act (HIPAA) laws in handling protected health information (PHI). * Ability to work in a patient care reporting software solution. * Ability to produce reports based on data reviewed. Critical thinking and prioritize to address and resolve deficiencies or problems. * Ability to read, write and comprehend complex documents, medical reports and documents and extrapolate medical information/procedures. * Ability to exercise judgment and discretion in establishing, applying, and interpreting policies and procedures including the knowledge of federal, state and local laws, regulations and policies specific to all facets of emergency medical services delivery. * Ability to establish and maintain effective working relationships with associates, subordinates, public officials, other governmental agencies, and the general public. * Ability to organize work and work independently without direct supervision. * Ability to compile data and speak/present on data to internal and external stakeholders. * Ability to express ideas clearly and concisely, orally and in writing, to groups and to individuals. This includes communicating with both uniformed and civilian personnel. * Ability to work under stressful conditions. * Ability to interact effectively and diplomatically with others. * Ability to provide an open, welcoming, and accessibility-first atmosphere that is conducive to Quality Assurance communications. * Must be able to relocate to other county locations based upon operational needs. ADA REQUIREMENTS: Mental Demands:Ability to read and comprehend professional manuals, legal documents, ordinances, statutes; instructions, reports, abstracts, financial reports, letters, and summaries. Ability to write reports, evaluations, summaries, letters, financial reports, procedures, and policies. Ability to perform advanced mathematical functions. Ability to speak publicly and extemporaneously; conversant in policies, techniques and procedures of discipline. Ability to analyze data and develop conclusions. Ability to identify and resolve problems. Physical Demands: Sedentary work. Ability to see, hear, talk. Visual acuity (peripheral vision, color acuity and depth perception) necessary to operate a motorized vehicle. Ability to lift 20 pounds. Environmental Demands: Inside work.

Job Description -Pay Range: $19.50 per hour / $20.50 Bilingual -Schedule: Various shifts between 8a-7pm with rotating weekends -Full-time, year-round work Join ARS, the nation's largest provider of residential HVAC, plumbing, and electrical services with 7,000+ team members and over 45 years of experience. What We Offer: Weekly pay via direct deposit Commission on top of hourly rate Paid training - no HVAC experience required Career path into Sales Advisor roles Full-time employees also receive: Insurance available after 31 days Low-cost medical (as low as $5/week) Dental, vision, HSA/FSA 401(k) with company match Paid time off + holiday pay Company-paid life insurance Responsibilities What You'll Do: Act as a key player in the customer satisfaction and quality assurance process by handling inbound concerns and proactively following up with customers Investigate service quality issues including pricing, damages, and technician performance Document and track all customer complaints and QA trends in a timely and detailed manner Coordinate resolutions by working closely with local service center teams and leadership Review and respond to customer satisfaction surveys, especially negative feedback Deliver quality insights and provide quarterly complaint analysis by branch and region Ensure service consistency and continuous improvement in the customer experience Qualifications What You Need: 1-2 years of customer service or call center experience Complaint resolution experience is REQUIRED 4-8 years of experience in quality control, inside sales, or a similar customer-focused role Exceptional communication skills and attention to detail Strong computer and documentation skills A proactive mindset, dependable attitude, and commitment to quality outcomes Pre-employment drug screen and nationwide background check required. *This posting provides details on potential compensation ranges and possibilities. These amounts are not guaranteed and should in no way be construed as an offer. * Sign-On Bonuses only available for roles that have them advertised; amounts are depending on experience and will be paid out according to an offer letter addendum. American Residential Services is an Equal Opportunity Employer. We do not discriminate based on race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or other protected characteristics. For more information about how we collect and use personal information, see our privacy policy here: ***********************************

Job Description We are seeking a skilled Legal Document Programmer to join our team. The ideal candidate will be responsible for programming legal documents within our case management system. This role requires a strong understanding of Microsoft Word, basic programming theory, and knowledge of legal processes. The candidate must possess excellent computer skills, effective communication abilities, and a solid understanding of data and variables. Experience with databases is also beneficial. Key Responsibilities: Program legal documents in the case management system. Utilize Microsoft Word for document creation and formatting. Apply basic programming theory and knowledge to automate document processes. Understand and implement legal processes within the system. Test and validate work products to ensure accuracy and functionality. Communicate effectively with team members and stakeholders. Analyze and manage data, ensuring proper handling of variables. Assist with database management and integration. Requirements Proficiency in Microsoft Word and strong computer skills. Basic understanding of programming theory and concepts. Knowledge of legal processes and terminology. Excellent communication skills, both written and verbal. Ability to test and validate work products. Strong analytical skills and attention to detail. Experience with databases is a plus. Preferred Skills: Familiarity with case management systems. Experience in legal document automation. Ability to work independently and as part of a team. Problem-solving skills and adaptability. Benefits Competitive Base Salary Medical, Dental, and vision coverage; 401K plan with company match PTO Paid Parental Leave Company-paid Life Insurance Short and Long Term Disability Insurance Convenient West Loop location, close to the CTA, Metra, Divvy, and major freeways (Chicago office) On-site gym (Chicago office only)

Department: Health Information Management Schedule/Status: 7:30am -4pm; Full Time Standard Hours/Week: 40 General Description: Under the general supervision of the Director of HIM, the Clinical Documentation Specialist (CDS) is responsible for coordinating the review of concurrent inpatient clinical documentation and data. The CDS facilitates accurate documentation for severity of illness and quality documentation in the medical record. This involves extensive record review, interaction with physicians, health information management professionals, clinical informatics, and nursing staff. The CDS works with providers to ensure clinical disease processes are accurately documented and that the documentation appropriately reflects the patient's severity of illness and DRG. Active participation in team meetings and education of staff in the CDI process is a key role. Key Responsibilities: * Analyzes documented data and information to assist in determining areas for improvement in documentation and proper DRG selection. Provides concurrent reviews of inpatient medical records, identify potential documentation deficits, and clarifies with providers (physicians, PAs, ARNPs, etc.) to ensure the appropriate severity of illness is documented. * Has a working knowledge of correct principal diagnosis and principal procedures. Understands ICD-10 coding and DRG principles in accordance with coding and reimbursement guidelines. Is able to validate DRG grouping and relate grouping methodology to documentation needs. * Utilizes documentation software and EMR templates to maintain accuracy of data for tracking purposes. * Formulates appropriate documentation clarification queries using established guidelines to clarify questionable or incomplete documentation. * Identifies clinical or system/process breakdowns and improvement opportunities and refers them to the appropriate areas (CM, Risk, Quality) for resolution. * Acts as a documentation resource for Nursing, Case Managers, Coding, and Physicians. Actively participates in the education of healthcare team members on current healthcare economic issues impacting practice patterns, reimbursement and positive patient outcomes. * Attends professional in-services and coding in-service programs. * Participates on hospital committees as assigned. Performs similar or related duties as assigned. Knows fire, disaster and safety procedures and regulations as pertains to the work area. Requirements: Formal Education: * Associates degree, or other two year college equivalent. Major required: Nursing. Graduate of an accredited RN Education Program, BSN preferred Work Experience: * Minimum of five (5) years nursing experience in Med/Surg., Critical Care, or similar nursing experience. Required Certifications / Licenses: * State of Florida RN license. ICD-10 training and certification preferred. * Certified Documentation Improvement Practitioner (CDIP) or Certified Clinical Documentation Specialist (CCDS) credentials preferred. Full Time Benefits: Eligible to participate in a number of PMC-sponsored benefits, including: * Benefits Start on Day 1 * Health, Dental and Vision Insurance * 403(b) Retirement Program * Tuition Reimbursement/Educational Assistance * EAP, Flex Spending, Accident, Critical and Other Applicable Benefits * Annual Accrual of 152 Personal Leave Bank (PLB) Hours We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law. Parrish Healthcare is a caring community of healthcare professionals passionate about excellence and fulfilling our mission of providing Healing Experiences For Everyone All The Time. Parrish Healthcare has a Culture of Choice. This means a we have a healing work environment that empowers people to aspire to be their very best. We partner passionate, talented and skilled people in the right role with the right resources. We provide a clear and strategic direction to achieve superior results on behalf of the communities we serve.

Applied Concepts, Inc. has been in business for over thirty years. Currently, it is North America's largest provider of business development solutions and training for the automotive industry. Applied Concepts presently has over 8,000 automotive dealership partners throughout North America. Copy and paste this link in your browser to learn even more about our unique and successful company services: *************************** Job Description As Quality Assurance Specialist we help automotive and powersport businesses connect with their customers through extensive training and support. Over the past 30 years, we have worked with over 8,000 dealerships, strengthening their phone skills to ultimately help with generating more sales and creating a better overall experience for their clients. BENEFITS Hourly rate of $11.00 Excellent training to ensure your success Benefits, Medical/Dental/401K with match Paid Time Off, including holidays Qualifications Desire to work in a team environment, where hard work and dedication are acknowledged and rewarded Professional attitude Ability to listen for and notate accurately key points Strong interpersonal and communication skills Proficient use of grammar and spelling Additional Information All your information will be kept confidential according to EEO guidelines.

Do you want to be part of an inclusive team that works to develop innovative therapies for patients? Every day, we are driven to develop and deliver innovative and effective new medicines to patients and physicians. If you want to be part of this exciting work, you belong at Astellas! Astellas Pharma Inc. is a pharmaceutical company conducting business in more than 70 countries around the world. We are committed to turning innovative science into medical solutions that bring value and hope to patients and their families. Keeping our focus on addressing unmet medical needs and conducting our business with ethics and integrity enables us to improve the health of people throughout the world. For more information on Astellas, please visit our website at ***************** Purpose and Scope: The Specialist, Quality Assurance for QC will be responsible for providing direct Quality oversight and support for Quality Control and US Methods and Tech Transfer laboratory operations and method qualification activities. This role will ensure adherence to agency regulations (GxP) and guidance, industry best practices, local regulations, and internal policies and procedures. This role will collaborate with cross-functional teams such as other Quality Assurance, Validation, Manufacturing, and MSAT teams to ensure quality and compliance. Essential Job Responsibilities: Quality Oversight of Laboratory Operations: * Provide QA oversight of QC laboratory activities, including testing of raw materials, in-process samples, drug substance and drug product, and environmental monitoring. * Conduct routine area walkthroughs to ensure laboratories operate in a state of control and comply with current Good Manufacturing Practices (cGxP). Test Method and Material Lifecycle Management: * Oversee the qualification, validation, and transfer of analytical methods, critical reagents, and reference standards. * Review and approve associated protocols, reports, and deviations to ensure compliance with regulatory and internal standards. Technical Leadership and Support: * Serve as a Subject Matter Expert (SME), providing advanced technical guidance and troubleshooting support for complex laboratory and quality-related issues. * Make informed decisions with minimal guidance, proactively seeking input when addressing cross-functional challenges. * Assist in workload management by prioritizing and distributing tasks across the team to ensure efficient execution of responsibilities. Data and Documentation Review: * Review and authorize laboratory testing data within Laboratory Information Management Systems (LIMS). * Review and approve Certificates of Analysis (CoA) and Certificates of Testing (CoT) to support batch disposition. * Review and approve Product Specification documents to ensure alignment with regulatory and internal requirements. Quality Systems and Compliance: * Lead or support nonconformances and deviations related to QC processes, including laboratory investigations, Out of Specification (OOS), and Out of Trend (OOT) results. * Author, review, and approve controlled documents such as Standard Operating Procedures (SOPs), specifications, protocols, and reports for Quality and GMP-related functions. * Author, review, and approve Quality System records, including Nonconformances, Corrective and Preventive Actions (CAPAs), and Change Management documentation, with thorough causal and impact assessments.

About Us: H&A Farms is a family-owned, multigenerational agricultural business with operations in Orange, Lake, and Levy counties. The companies farming and packing operations manages 1,000+ acres and packs fruit for another 60+ growers throughout Florida and Georgia representing another 1,800+ acres. The company also has an agritourism business that operates as Amber Brooke Farms located in Eustis, Florida and provides u-pick, special events, festivals, and private event activities for nearly 10,000 guests every year. Job Summary: We are seeking a motivated and experienced Quality Control Specialist. In this role, you will be responsible for ensuring that the fruit we pack meets specific quality standards for freshness, appearance, and safety before they reach customers. This position is based in a fruit packing facility where temperatures typically range from 35°F to 55°F. Employees must be able to work comfortably and safely in a cool environment for extended periods of time while performing their job duties. The ideal candidate for this position should be well-organized and possess good communication skills. They should be comfortable with managing paperwork and utilizing information systems. A good understanding of quality control procedures is also important. Key Responsibilities: Inspect and test materials, equipment, processes, and products to ensure quality standards are met. Conducting tests and analyzing results to identify defects or inconsistencies in products and processes. Making recommendations for improvements based on the data collected during inspections. Collaborating with production and quality assurance teams to ensure compliance with quality standards. Maintaining accurate documentation of quality control tests and inspections. Qualifications: Work experience as a Quality Control Specialist or similar role in the fruit farm industry. Knowledge of food safety practices and prior experience working in environments where adherence to food handling standards is essential. Experience with relevant software, such as MS Office and data analysis software. Data collection and analysis skills. Computer knowledge and bilingual in Spanish and English is required. Join our team as a Quality Control Specialist and play a vital role in ensuring the excellence of our fruit while fostering a culture of continuous improvement within our organization. Job Type: Full-time Seasonal Work Location: In person

Job Description Now Hiring: QA/QC Technician - Data Center Project (Montgomery, AL) Pay: TBD, based on experience Per Diem: TBD for qualified travelers Schedule: Full-time | Long-term project United Trades of America is currently hiring a QA/QC Technician for a high-profile data center construction project in Montgomery, Alabama. This is a critical role focused on ensuring quality, safety, and compliance across all phases of construction. If you are detail-oriented and experienced in quality assurance/control for industrial or commercial builds, we want to hear from you. Key Responsibilities: Perform inspections and testing of mechanical, electrical, or structural systems according to project specifications Monitor installation practices and ensure adherence to quality standards and safety protocols Maintain accurate and up-to-date QA/QC documentation, reports, and logs Collaborate with site supervisors, engineers, and subcontractors to identify and resolve deficiencies Ensure compliance with drawings, specs, ITPs, and applicable codes Document and report non-conformance issues and confirm resolution through corrective actions Qualifications: Minimum 3 years of QA/QC experience in commercial or industrial construction Experience with data centers or mission-critical projects is highly preferred Strong working knowledge of ITPs, submittals, RFIs, and construction documents Familiarity with construction codes, specifications, and jobsite safety requirements Proficient in Microsoft Office and QA/QC tracking tools Excellent communication and documentation skills OSHA 10 or 30 certification preferred Additional Requirements: Must provide own PPE and tools Must be able to pass a background check and drug screening How to Apply:

Founded in 1954, Vibrant Ingredients is a leading provider of natural, clean label ingredients and systems that power extraordinary food and beverage experiences. The company's broad portfolio - including natural flavors, botanical extracts, functional nutrition, cold brew coffee, tea essences, and food protection solutions - enhances taste, texture, color, shelf life, and performance across a wide range of applications. Vibrant operates four state-of-the-art facilities across the United States and works with leading brands, manufacturers, and foodservice operators. With vertically integrated capabilities and a proven track record of innovation and execution, Vibrant helps customers accelerate to market without compromise. About the role: We are a trusted partner to our customers when it comes to innovation and an industry leader in clean label ingredients, we are a true partner. We collaborate with our customers in ways that respect people and the environment. A commitment to Purely Better™ drives our innovation team to discover new, on trend solutions. As a QA Technician, you play a critical role in ensuring that all manufactured products meet stringent quality standards and comply with industry regulations. This position involves conducting detailed inspections, performing tests, and analyzing data to identify defects or deviations from specifications. The QA Technician collaborates closely with production teams to implement corrective actions and continuous improvement initiatives that enhance product reliability and customer satisfaction. By maintaining accurate documentation and reporting, the technician supports traceability and accountability throughout the manufacturing process. Ultimately, this role is essential in safeguarding the integrity of the manufacturing output and upholding the company's reputation for quality excellence. How will you contribute: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Reasonable accommodation may be made to enable qualified individuals with disabilities to perform essential job functions. Essential job functions and duties include, but are not limited to: Perform routine and non-routine inspections of raw materials, in-process components, and finished products to verify conformance to quality standards. Conduct various tests using precision measurement tools and equipment to assess product attributes such as dimensions, functionality, and durability. Document inspection results and test data accurately, maintaining detailed records for quality control and audit purposes. Identify, report, and track non-conformances or defects, working with production and engineering teams to facilitate root cause analysis and corrective actions. Participate in continuous improvement projects by providing quality data insights and recommending process enhancements to reduce defects and improve efficiency. Skills: The QA Technician utilizes their technical skills daily to perform precise measurements and inspections that ensure product quality. Proficiency with measurement instruments and the ability to interpret engineering drawings enable accurate verification of product specifications. Analytical skills are essential for identifying trends in quality data and supporting root cause investigations. Communication skills facilitate effective collaboration with production and engineering teams to implement corrective actions and improvements. Additionally, organizational skills are critical for maintaining detailed records and ensuring compliance with quality standards and regulatory requirements. Minimum Requirements/Qualifications: High school diploma or equivalent required; technical or vocational training in quality assurance or manufacturing preferred. Basic understanding of quality control principles and manufacturing processes. Experience using measurement tools such as calipers, micrometers, and gauges. Ability to read and interpret technical drawings, specifications, and quality documentation. Strong attention to detail and commitment to maintaining high-quality standards. Preferred Qualifications: Associate degree or certification in Quality Assurance, Manufacturing Technology, or related field. Experience with statistical process control (SPC) and quality management systems (QMS) such as ISO 9001. Familiarity with computerized quality inspection software and data entry systems. Previous experience in a manufacturing environment, particularly in the food and beverage industry. Strong problem-solving skills and the ability to work collaboratively in cross-functional teams. Work Environment: May involve exposure to allergens such as celery. What Vibrant Ingredients can offer you: Generous time off for vacations Paid Holidays 401(k) with company match Tuition reimbursement Medical/Dental/Vision Health & Wellness programs More about us: Vibrant Ingredients, headquartered in Lake Mary, FL, is one of the world's leading independent providers of natural ingredients. With a legacy spanning over 70 years, we deliver a diverse portfolio of clean label ingredients and innovative system solutions to the food and beverage industry. Our commitment to quality and performance is reflected in our American-made products, which enhance both taste and functionality. Backed by advanced manufacturing capabilities, we specialize in fermentation, patented cold brew extraction, custom flavor development, and a range of drying and blending technologies. Operating from four state-of-the-art facilities strategically located across the U.S., we ensure the accessibility of real, high-quality ingredients-helping our customers create better-for-you food and beverage for consumers. "Improving the food and beverages consumed by providing real ingredients from nature that work." This position is currently classified as on-site. Employees are eligible to participate in Medical, Dental, Vision, Life Insurance, 401(k), Holidays, Vacation, Tuition Reimbursement Program. The final salary offered for this position may take into account a number of factors including, but not limited to, location, skills, education, and experience. The Company reserves the right to modify, update, change and/or make corrections to this job description, at the sole discretion of senior management, at any time during the employee's employment term, at the sole discretion of management. EEO Statement Vibrant Ingredients is an equal opportunity employer committed to employing a diverse workforce and providing accommodations for people with disabilities in all parts of the hiring process as required under its Employment Accommodation Policy. Vibrant Ingredients will work with applicants to meet accommodation needs that are made known to Vibrant Ingredients in advance. **Please no external recruiters** 2nd Shift: 3PM to 11:30PM 3rd Shift: 11PM to 7:30AM

Benefits: 401(k) matching Competitive salary Dental insurance Health insurance Paid time off Vision insurance CURIS System is a growing Bio-decontamination company specializing in integrated systems for the Life Sciences, BioPharma and Healthcare facilities and installing bio-decontamination equipment nationwide. Our team is growing due to the principles of quality service, integrity, transparency, and hard work focused on superior customer satisfaction. We are looking for a Project Lead who is willing and able to manage while working with a small design and implementation teams. Candidates are expected to have a construction background and familiarity with electrical work, building regulations, structural steelwork, and reading blueprints/schematics. CURIS is looking for a Quality Manager who has expertise in mechanical / electrical/ pneumatic fields. This candidate must be a hardworking individual talented at investigating new applications and working in cross-functional teams. They must be enthusiastic and eager to contribute to team success through hard work, attention to detail and excellent organizational skills. Motivated to learn, grow, and excel in any industry. This position would be responsible for the following rolls and responsibilities…. Verify production and special projects compliance with quote/POs, internal submittal, and design drawings Assist in development of quality goals for newly initiated R&D projects to inform the design process towards zero-defect product release Understand pneumatic systems assembly/diagnostics and network/hard wired logic control systems Containment systems design & testing, operator exposure testing, pressure decay and leak testing Assist sales team with technical backup at their presentations, pre/post sale. Liaison between engineering and production departments, facilitating communications and maintaining appropriate awareness on project developments to facilitate quality processes and forecasting Develop, configure, and optimize quality processes from inception to start up and validation or certification in accordance with industry standards Prepare and present technical information to team members and management Maintain a working knowledge of government and industry quality codes and standards Verify compliance with detailed process documentation and operational instruction for work being conducted in the manufacturing areas and on-site using SOPs. Assist and advise on the creation or updating of non-existent or outdated policies. Prepare, check, and coordinate documentation to corroborate equipment design and application to include (but not limited to) commissioning items, FAT, SAT, IQ/OQ/PQ, calibration and maintenance deliverables, user manuals, and troubleshooting guides Use Microsoft Word and other software tools to create documents and other communications. Demonstrate respect, friendliness, and willingness to help wherever needed. Support customer service efforts by communicating with customers as needed in a friendly, efficient manner following outlined steps of service Aseptic process cycle development Calibration, airflow system validation, 3rd party equipment integration Evaluate existing procedures and make proactive adjustments to meet changing demands Use critical thinking to break down problems, evaluate solutions and make decisions which mutually support quality and business objectives Support and mentor project/electrical/mechanical design teams & production/site teams by providing a quality perspective for incorporation early in the design process Involve all team members to ensure quality is seen as individually driven & maintained in a team environment Actively track equipment troubleshooting requests to capture relevant quality KPIs based on issues experienced in field or via RMA Create standard validation protocols for decontamination services and organic laboratory services Commission /Validate/Service Pharmaceutical Aseptic and containment equipment Ideal background would include… Electrical engineering management, commissioning engineer, project manager with 5+ years' experience. Committed to providing unprecedented technical support to clients. May have recent experience in Pharma commissioning & consultancy. Additional Skills may include… Calibration of Pressure transmitters, Magnehelic gauges, Airflow sensors, Flow meters Airflow balancing within facilities and standalone downflow booth systems with airlocks Proficient with measurement, calibration, and test equipment Detail oriented, good organizational traits Knowledge of general safety and hygiene practices Strong analytical, problem-solving skills Strong written and verbal communication skills Ability to work in a team-oriented environment Quality Assurance Experience in a clean room environment and aseptic manufacturing environment Mechanically inclined with troubleshooting aptitude • Knowledge of manufacturing methods, process & quality standards (ISO 9001, 21CFR Pt11 Electronic records & Signatures) Electrical/Mechanical Blueprint Reading P&ID reading for verification Process Flow Diagrams HEPA Filter Testing Particle Counting Pressure Decay/Leak Testing DC & Variable Speed Drive Systems Electrical System Diagnosis Commissioning/Validation of Containment/Aseptic Systems Customer Service & Aftersales Support Document Writer for policies and cause and effect documentation Compliance Within cGMP Environment Microsoft Excel/Word/Project/Powerpoint Compliance With NEC Electrical Codes/ATEX/UL Electrical Panel Building knowledge - basic for verification Decontamination Equipment Welcome to CURIS System, the leading innovator in decontamination equipment designed to meet the rigorous demands of today's contamination control standards. Our pioneering hydrogen peroxide-based portable disinfection equipment provides high-level disinfection that can be effectively utilized in any environment without sacrificing power or reliability. Whether you're looking to address the needs of biosafety-level laboratories, cleanrooms, pharmaceutical manufacturing facilities, health-care facilities, or any industry requiring meticulous bio-decontamination, our solutions offer unmatched portability and efficacy. As experts in industrial decontamination, we ensure that our systems deliver consistently thorough treatments, helping maintain safety and a high-level of sterility assurance in an environment. At CURIS System, we understand the importance of reliable decontamination equipment in preventing cross-contamination and minimizing human error. Our advanced technology not only reduces the need for harmful or toxic chemicals but also includes comprehensive documentation capabilities, allowing users to record and track disinfection data. We blend cutting-edge technology with strategic processes, ensuring superior contamination control. Careers Interested in exploring career opportunities with CURIS System? As a global leader in decontamination technology, we continue to experience rapid growth and are always interested in speaking with new talent interested in joining our team. From administrative staff to engineering and research/development to sales and everything in between, we are always looking for people to join our journey in making a difference.

Applied Concepts, Inc. has been in business for over thirty years. Currently, it is North America's largest provider of business development solutions and training for the automotive industry. Applied Concepts presently has over 8,000 automotive dealership partners throughout North America. Copy and paste this link in your browser to learn even more about our unique and successful company services: *************************** Job DescriptionAs Quality Assurance Specialist we help automotive and powersport businesses connect with their customers through extensive training and support. Over the past 30 years, we have worked with over 8,000 dealerships, strengthening their phone skills to ultimately help with generating more sales and creating a better overall experience for their clients. BENEFITS Hourly rate of $11.00 Excellent training to ensure your success Benefits, Medical/Dental/401K with match Paid Time Off, including holidays Qualifications Desire to work in a team environment, where hard work and dedication are acknowledged and rewarded Professional attitude Ability to listen for and notate accurately key points Strong interpersonal and communication skills Proficient use of grammar and spelling Additional Information All your information will be kept confidential according to EEO guidelines.