Quality assurance technician jobs in Indio, CA - 23 jobs

Responsibilities include, but not limited to the programming, maintenance and operation of all audio, video components, and lighting assets in respect to all entertainment formats. Essential Duties and Responsibilities (other duties may be assigned) Program, operate, troubleshoot, diagnose, repair and provide preventative maintenance (such as cleaning) for intelligent and conventional lighting systems. Execute lighting shows in collaboration with musical performers exercising discretion and judgment to ensure maximum entertainment value. Operate, troubleshoot, diagnose, repair and provide preventative maintenance (such as cleaning) for audio systems including the casinos music and paging system Program, operate, troubleshoot, diagnose, repair and provide preventive maintenance (such and cleaning and replacement) of all video service to include projectors and TV's in various casino and hotel zones. Assist with entertainers load-in and set up of equipment. Choreograph effective sound checks maintaining casino' standards for both quality sound mix and volume control. Train marketing and floor supervisors for appropriate volume control in various casino and hotel zones. Establish and maintain relationships with audio and lighting hardware and software vendors. Process service requests for approval, Obtains estimates for purchases following currently established purchasing procedures. Complete purchase requisitions, as needed, for approval. Inventories lighting and audio equipment before and after each performance for reconciliation purposes. Provide excellent guest service. Must comply with all applicable ACCRS and SRC System of Internal Controls, Standard Operating Procedures and all Tribal Regulations. Supervisory Responsibilities None Access to Sensitive Areas and Information Per the ACGC Access Matrix Signatory Ability None Qualifications Education and/or Experience High school diploma or GED. Must have a minimum of three years of hands-on professional experience as an audio/visual technician for major entertainment productions Must have demonstrated technical expertise and knowledge of major entertainment production and technology, including analog audio mixing and equalization equipment and Light Jockey intelligent lighting software. Must have excellent organizational skills, computer literate, the ability to work with all departments and have excellent customer relation skills. Must be able to communicate in English. Working Conditions/Physical Demands To perform this job successfully, the individual must be able to stand, move and work throughout the office area and properties, including walking up to 1 ½ mile, climbing stairs, and sitting at desk/work station for the duration of the shift. Must be able to work in a smoke filled environment. Must be able to work in a “lighting subdued” environment for extended periods of time. Must be able to work in extreme weather conditions to include extreme heat and cold weather. Typically the individual will be housed in an office environment. The noise level in the work environment is usually moderate, but will escalate when located in the casino environment. Must be able to grasp, bend, lift and/or carry or otherwise move goods weighing a minimum of 25 lbs. on an intermittent basis, and sufficient dexterity of hand in order to use office equipment including, but not limited to: a computer keyboard, calculator, general office equipment and multi-line telephone.

Imagine yourself… · Doing meaningful work that makes an everyday impact on the world around you. · Growing your expertise and expanding your skillset with every project. · Thriving in a supportive team environment that inspires you to strive for excellence. It's possible with a role at McCrometer (******************** McCrometer, a Veralto company, is a global leader in flow instrumentation. We design, develop, and manufacture world-class flow measurement equipment for far-reaching impact: our products are used in the oil and gas industry, agriculture and irrigation, water and wastewater systems management, and industrial processes. Behind McCrometer's innovations is a top-notch team with deep expertise in flow physics and real-world operating dynamics. When you join our team and the broader Veralto network, you'll work with products at the forefront of flow technologies that make an everyday impact on resources we all rely on-and along the way, you'll make a powerful investment in your growth through challenging, meaningful work and dedicated opportunities for career development. We offer: · Competitive vacation package · Flexible working hours · Professional onboarding and training options · Powerful team looking forward to working with you · Career coaching and development opportunities · Health benefits · 401(k) About the Role: Reporting to the Quality Manager role, the Quality Control Technician will monitor the quality of outgoing products through visual, dimensional, and functional inspections according to established specifications. This individual ensures that inspected products conform to McCrometer and customer expectations, specifications, and requirements. The role requires strong working knowledge of inspection processes, the ability to make sound decisions, accurately document results, and work under minimal supervision. This position is part of the Quality Department, located in Hemet, CA, and will be on-site. In this role, a typical day will look like: · Promoting and maintaining quality standards and culture throughout the production and inspection processes. · Reading and interpreting specifications, drawings, and work instructions to understand product requirements. · Performing a variety of inspections-including visual, dimensional, functional, and conformance checks-to ensure products meet established specifications and regulatory requirements. · Recording inspection results accurately and maintaining quality documentation in accordance with established standards. · Reporting and communicating product rejections or non-conformances to relevant departments. · Developing product inspection plans as part of continuous process improvement initiatives. · Providing technical support for problem identification, leading root cause investigations, and supporting resolution of quality issues. · Completing assignments related to internal defects and non-conformances, often requiring cross-functional coordination. · Supporting Quality KPI targets and continuous improvement activities aligned with the Veralto Enterprise System (VES). · Maintaining clean, safe, and organized work areas and assisting in training team members when needed. The essential requirements of the job include: · High school diploma or GED required; associate degree preferred. · Minimum of 2 years' experience in inspection, measurement, or monitoring work within a manufacturing environment. · Strong mathematical skills and proficiency with spreadsheets (Excel) and Word. · Solid understanding of mechanical assembly, testing, and inspection processes. · Ability to read and interpret written instructions, blueprints, specifications, and sketches. · Experience using precision measurement tools such as calipers, micrometers, and gauges. · Excellent attention to detail and commitment to producing quality work. · Ability to work independently and collaboratively within cross-functional teams. · Flexibility and adaptability to manage time and projects effectively. McCrometer is proud to be part of the Water Quality segment of Veralto (NYSE: VLTO), a $5B global leader dedicated to ensuring access to clean water, safe food and medicine, and trusted essential goods. When you join Veralto's vibrant global network of 16,000 associates, you join a unique culture and work environment where purpose meets possibility: where the work you do has an everyday impact on the resources and essentials we all rely on, and where you'll have valuable opportunities to deepen your skillset, pursue your ambitions, and grow your career. Together, we're Safeguarding the World's Most Vital Resources™-and building rewarding careers along the way. US ONLY: The below range reflects the range of possible compensation for this role at the time of this posting. We may ultimately pay more or less than the posted range. This range may be modified in the future. An associate's position within the salary range will be based on several factors, including, but not limited to, relevant education, qualifications, certifications, experience, skills, seniority, geographic location, performance, shift, travel requirements, sales or revenue-based metrics, any collective bargaining agreements, and business or organizational needs. The compensation range for this role is $27.00 - $31.00 USD per hour. We offer a comprehensive package of benefits including paid time off, medical/dental/vision insurance and 401(k) to eligible employees. Note: No amount of pay is considered to be wages or compensation until such amount is earned, vested, and determinable. The amount and availability of any bonus, commission, benefits, or any other form of compensation and benefits that are allocable to a particular employee remains in the Company's sole discretion unless and until paid and may be modified at the Company's sole discretion, consistent with the law. US residents: In any materials you submit, you may redact or remove age-identifying information such as age, date of birth, or dates of school attendance or graduation. You will not be penalized for redacting or removing this information. Veralto Corporation and all Veralto Companies are committed to equal opportunity regardless of race, color, national origin, religion, sex, age, marital status, disability, veteran status, sexual orientation, gender identity, or other characteristics protected by law. We value diversity and the existence of similarities and differences, both visible and not, found in our workforce, workplace and throughout the markets we serve. Our associates, customers and shareholders contribute unique and different perspectives as a result of these diverse attributes. The EEO posters are available here. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform crucial job functions, and to receive other benefits and privileges of employment. Please contact us at applyassistance@veralto.com to request accommodation. Unsolicited Assistance We do not accept unsolicited assistance from any headhunters or recruitment firms for any of our job openings. All resumes or profiles submitted by search firms to any employee at any of the Veralto companies, in any form without a valid, signed search agreement in place for the specific position, approved by Talent Acquisition, will be deemed the sole property of Veralto and its companies. No fee will be paid in the event the candidate is hired by Veralto and its companies because of the unsolicited referral.

**Imagine yourself...** · Doing meaningful work that makes an everyday impact on the world around you. · Growing your expertise and expanding your skillset with every project. · Thriving in a supportive team environment that inspires you to strive for excellence. It's possible with a role at **McCrometer** ( ****************** ). McCrometer, a Veralto company, is a global leader in flow instrumentation. We design, develop, and manufacture world-class flow measurement equipment for far-reaching impact: our products are used in the oil and gas industry, agriculture and irrigation, water and wastewater systems management, and industrial processes. Behind McCrometer's innovations is a top-notch team with deep expertise in flow physics and real-world operating dynamics. When you join our team and the broader Veralto network, you'll work with products at the forefront of flow technologies that make an everyday impact on resources we all rely on-and along the way, you'll make a powerful investment in your growth through challenging, meaningful work and dedicated opportunities for career development. **We offer:** · Competitive vacation package · Flexible working hours · Professional onboarding and training options · Powerful team looking forward to working with you · Career coaching and development opportunities · Health benefits · 401(k) **About the Role:** Reporting to the Quality Manager role, the **Quality Control Technician** will monitor the quality of outgoing products through visual, dimensional, and functional inspections according to established specifications. This individual ensures that inspected products conform to McCrometer and customer expectations, specifications, and requirements. The role requires strong working knowledge of inspection processes, the ability to make sound decisions, accurately document results, and work under minimal supervision. This position is part of the **Quality Department** , located in **Hemet, CA** , and will be **on-site** . **In this role, a typical day will look like:** · Promoting and maintaining quality standards and culture throughout the production and inspection processes. · Reading and interpreting specifications, drawings, and work instructions to understand product requirements. · Performing a variety of inspections-including visual, dimensional, functional, and conformance checks-to ensure products meet established specifications and regulatory requirements. · Recording inspection results accurately and maintaining quality documentation in accordance with established standards. · Reporting and communicating product rejections or non-conformances to relevant departments. · Developing product inspection plans as part of continuous process improvement initiatives. · Providing technical support for problem identification, leading root cause investigations, and supporting resolution of quality issues. · Completing assignments related to internal defects and non-conformances, often requiring cross-functional coordination. · Supporting Quality KPI targets and continuous improvement activities aligned with the Veralto Enterprise System (VES). · Maintaining clean, safe, and organized work areas and assisting in training team members when needed. **The essential requirements of the job include:** · High school diploma or GED required; associate degree preferred. · Minimum of 2 years' experience in inspection, measurement, or monitoring work within a manufacturing environment. · Strong mathematical skills and proficiency with spreadsheets (Excel) and Word. · Solid understanding of mechanical assembly, testing, and inspection processes. · Ability to read and interpret written instructions, blueprints, specifications, and sketches. · Experience using precision measurement tools such as calipers, micrometers, and gauges. · Excellent attention to detail and commitment to producing quality work. · Ability to work independently and collaboratively within cross-functional teams. · Flexibility and adaptability to manage time and projects effectively. McCrometer is proud to be part of the **Water Quality** segment of **Veralto (NYSE: VLTO)** , a $5B global leader dedicated to ensuring access to clean water, safe food and medicine, and trusted essential goods. When you join Veralto's vibrant global network of 16,000 associates, you join a unique culture and work environment where purpose meets possibility: where the work you do has an everyday impact on the resources and essentials we all rely on, and where you'll have valuable opportunities to deepen your skillset, pursue your ambitions, and grow your career. Together, we're **Safeguarding the World's Most Vital Resources** -and building rewarding careers along the way. **US ONLY** **:** The below range reflects the range of possible compensation for this role at the time of this posting. We may ultimately pay more or less than the posted range. This range may be modified in the future. An associate's position within the salary range will be based on several factors, including, but not limited to, relevant education, qualifications, certifications, experience, skills, seniority, geographic location, performance, shift, travel requirements, sales or revenue-based metrics, any collective bargaining agreements, and business or organizational needs. The compensation range for this role is $27.00 - $31.00 USD per hour. We offer a comprehensive package of benefits including paid time off, medical/dental/vision insurance and 401(k) to eligible employees. Note: No amount of pay is considered to be wages or compensation until such amount is earned, vested, and determinable. The amount and availability of any bonus, commission, benefits, or any other form of compensation and benefits that are allocable to a particular employee remains in the Company's sole discretion unless and until paid and may be modified at the Company's sole discretion, consistent with the law. US residents: In any materials you submit, you may redact or remove age-identifying information such as age, date of birth, or dates of school attendance or graduation. You will not be penalized for redacting or removing this information. Veralto Corporation and all Veralto Companies are committed to equal opportunity regardless of race, color, national origin, religion, sex, age, marital status, disability, veteran status, sexual orientation, gender identity, or other characteristics protected by law. We value diversity and the existence of similarities and differences, both visible and not, found in our workforce, workplace and throughout the markets we serve. Our associates, customers and shareholders contribute unique and different perspectives as a result of these diverse attributes. The EEO posters are available **here (********************************************* . We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform crucial job functions, and to receive other benefits and privileges of employment. Please contact us at applyassistance@veralto.com to request accommodation. **Unsolicited Assistance** We do not accept unsolicited assistance from any headhunters or recruitment firms for any of our job openings. All resumes or profiles submitted by search firms to any employee at any of the Veralto companies (*************************************** , in any form without a valid, signed search agreement in place for the specific position, approved by Talent Acquisition, will be deemed the sole property of Veralto and its companies. No fee will be paid in the event the candidate is hired by Veralto and its companies because of the unsolicited referral. Veralto and all Veralto Companies are committed to equal opportunity regardless of race, color, national origin, religion, sex, age, marital status, disability, veteran status, sexual orientation, gender identity, or other characteristics protected by law. We value diversity and the existence of similarities and differences, both visible and not, found in our workforce, workplace and throughout the markets we serve. Our associates, customers and shareholders contribute unique and different perspectives as a result of these diverse attributes.

Imagine yourself… * Doing meaningful work that makes an everyday impact on the world around you. * Growing your expertise and expanding your skillset with every project. * Thriving in a supportive team environment that inspires you to strive for excellence. It's possible with a role at McCrometer (******************** McCrometer, a Veralto company, is a global leader in flow instrumentation. We design, develop, and manufacture world-class flow measurement equipment for far-reaching impact: our products are used in the oil and gas industry, agriculture and irrigation, water and wastewater systems management, and industrial processes. Behind McCrometer's innovations is a top-notch team with deep expertise in flow physics and real-world operating dynamics. When you join our team and the broader Veralto network, you'll work with products at the forefront of flow technologies that make an everyday impact on resources we all rely on-and along the way, you'll make a powerful investment in your growth through challenging, meaningful work and dedicated opportunities for career development. We offer: * Competitive vacation package * Flexible working hours * Professional onboarding and training options * Powerful team looking forward to working with you * Career coaching and development opportunities * Health benefits * 401(k) About the Role: Reporting to the Quality Manager role, the Quality Control Technician will monitor the quality of outgoing products through visual, dimensional, and functional inspections according to established specifications. This individual ensures that inspected products conform to McCrometer and customer expectations, specifications, and requirements. The role requires strong working knowledge of inspection processes, the ability to make sound decisions, accurately document results, and work under minimal supervision. This position is part of the Quality Department, located in Hemet, CA, and will be on-site. In this role, a typical day will look like: * Promoting and maintaining quality standards and culture throughout the production and inspection processes. * Reading and interpreting specifications, drawings, and work instructions to understand product requirements. * Performing a variety of inspections-including visual, dimensional, functional, and conformance checks-to ensure products meet established specifications and regulatory requirements. * Recording inspection results accurately and maintaining quality documentation in accordance with established standards. * Reporting and communicating product rejections or non-conformances to relevant departments. * Developing product inspection plans as part of continuous process improvement initiatives. * Providing technical support for problem identification, leading root cause investigations, and supporting resolution of quality issues. * Completing assignments related to internal defects and non-conformances, often requiring cross-functional coordination. * Supporting Quality KPI targets and continuous improvement activities aligned with the Veralto Enterprise System (VES). * Maintaining clean, safe, and organized work areas and assisting in training team members when needed. The essential requirements of the job include: * High school diploma or GED required; associate degree preferred. * Minimum of 2 years' experience in inspection, measurement, or monitoring work within a manufacturing environment. * Strong mathematical skills and proficiency with spreadsheets (Excel) and Word. * Solid understanding of mechanical assembly, testing, and inspection processes. * Ability to read and interpret written instructions, blueprints, specifications, and sketches. * Experience using precision measurement tools such as calipers, micrometers, and gauges. * Excellent attention to detail and commitment to producing quality work. * Ability to work independently and collaboratively within cross-functional teams. * Flexibility and adaptability to manage time and projects effectively. McCrometer is proud to be part of the Water Quality segment of Veralto (NYSE: VLTO), a $5B global leader dedicated to ensuring access to clean water, safe food and medicine, and trusted essential goods. When you join Veralto's vibrant global network of 16,000 associates, you join a unique culture and work environment where purpose meets possibility: where the work you do has an everyday impact on the resources and essentials we all rely on, and where you'll have valuable opportunities to deepen your skillset, pursue your ambitions, and grow your career. Together, we're Safeguarding the World's Most Vital Resources-and building rewarding careers along the way. US ONLY: The below range reflects the range of possible compensation for this role at the time of this posting. We may ultimately pay more or less than the posted range. This range may be modified in the future. An associate's position within the salary range will be based on several factors, including, but not limited to, relevant education, qualifications, certifications, experience, skills, seniority, geographic location, performance, shift, travel requirements, sales or revenue-based metrics, any collective bargaining agreements, and business or organizational needs. The compensation range for this role is $27.00 - $31.00 USD per hour. We offer a comprehensive package of benefits including paid time off, medical/dental/vision insurance and 401(k) to eligible employees. Note: No amount of pay is considered to be wages or compensation until such amount is earned, vested, and determinable. The amount and availability of any bonus, commission, benefits, or any other form of compensation and benefits that are allocable to a particular employee remains in the Company's sole discretion unless and until paid and may be modified at the Company's sole discretion, consistent with the law. US residents: In any materials you submit, you may redact or remove age-identifying information such as age, date of birth, or dates of school attendance or graduation. You will not be penalized for redacting or removing this information. Veralto Corporation and all Veralto Companies are committed to equal opportunity regardless of race, color, national origin, religion, sex, age, marital status, disability, veteran status, sexual orientation, gender identity, or other characteristics protected by law. We value diversity and the existence of similarities and differences, both visible and not, found in our workforce, workplace and throughout the markets we serve. Our associates, customers and shareholders contribute unique and different perspectives as a result of these diverse attributes. The EEO posters are available here. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform crucial job functions, and to receive other benefits and privileges of employment. Please contact us at applyassistance@veralto.com to request accommodation. Unsolicited Assistance We do not accept unsolicited assistance from any headhunters or recruitment firms for any of our job openings. All resumes or profiles submitted by search firms to any employee at any of the Veralto companies, in any form without a valid, signed search agreement in place for the specific position, approved by Talent Acquisition, will be deemed the sole property of Veralto and its companies. No fee will be paid in the event the candidate is hired by Veralto and its companies because of the unsolicited referral.

Travel Quality Control/Indexing Tech - Rancho Mirage, CA Connected Health Care is seeking a dedicated Travel Quality Control/Indexing Technician to join one of our trusted healthcare partners in Rancho Mirage, California. This 13-week contract opportunity is ideal for professionals looking to expand their healthcare career while exploring the beauty of Southern California. Weekly Compensation: Up to $1,000/week (based on experience) Contract Length: 13 weeks Position Overview The Quality Control/Indexing Technician will be responsible for ensuring the accuracy and integrity of electronic medical records and documentation within the facility's information systems. This position requires attention to detail, accuracy, and the ability to work in a fast-paced healthcare environment. Responsibilities Verify, review, and index patient records into the appropriate electronic systems Conduct quality control audits to ensure completeness and compliance with hospital policies Identify and correct indexing errors or discrepancies in scanned documents Collaborate with HIM (Health Information Management) staff and clinical departments to resolve data issues Maintain confidentiality and security of all patient information Assist with scanning and archiving medical documentation as needed Support process improvements related to record management and workflow efficiency Education Required: N/A Licensure/Certification Required: N/A Experience Required: N/A Preferred: 1 year of previous clerical experience, preferably in a Medical Records department or other healthcare setting Why Work With Connected Health Care? Connected Health Care is a premier recruitment and staffing firm specializing in healthcare placements nationwide. We're committed to connecting talented professionals with rewarding opportunities, offering personalized career support every step of the way. Discover Rancho Mirage, California Located in the heart of the Coachella Valley, Rancho Mirage offers a perfect blend of work-life balance, sunshine, and sophistication. Whether you're an outdoor adventurer or a relaxation seeker, this desert oasis has something for everyone: Outdoor Activities: Hike scenic desert trails, golf at world-class courses, or explore nearby Joshua Tree National Park Arts & Culture: Visit the Palm Springs Art Museum or attend local festivals and events throughout the Coachella Valley Dining & Shopping: Enjoy upscale dining, boutique shopping, and vibrant nightlife in downtown Palm Springs Relaxation: Unwind at luxury spas and resorts that make this region famous for rejuvenation and wellness Weather: Experience year-round sunshine and breathtaking mountain views Apply Today! Ready to take your next step in healthcare while experiencing the best of Southern California? Don't wait - this position won't last long! Contact: Savannah - Account Manager ************** ************************

**Join Our Team as Engineer Technician III at the Grand Hyatt Indian Wells Resort and Villas!** **This position is for evening (PM) shifts. Regular work hours are typically between 3pm and 11:30pm. Candidates must be available to work during these hours as scheduled.** Are you ready to be part of a world-class team at one of the most luxurious destinations in the heart of California? The Grand Hyatt Indian Wells Resort and Villas is seeking a skilled and dynamic **Mechanic** to help us maintain our stunning property to the highest standards! In this exciting role, you'll be responsible for ensuring the smooth operation of a wide variety of systems throughout the resort. Your expertise will be essential in keeping our **guest rooms** , **meeting spaces** , and **front-of-house areas** running flawlessly, as well as maintaining vital back-of-house systems like the **kitchen** , **laundry** , **electrical** , **mechanical** , and **HVAC** systems. As a Tech III, you'll be the key player in performing preventative maintenance and troubleshooting, using a state-of-the-art Windows-based computer system. You'll work with cutting-edge technology to keep our operations running seamlessly, ensuring both our guests and team members experience nothing short of excellence. The pay rate for this position is $20.00-$24.00 hourly. This is the pay rate for this position that Grand Hyatt Indian Wells reasonably expects to pay. Decisions regarding individual salaries will be based on a number of factors, such as experience and education. Key responsibilities include: + **Shift coverage** across various maintenance areas, requiring a keen eye for detail and quick troubleshooting abilities + Performing preventative maintenance on **major equipment** and systems, ensuring the longevity and efficiency of all resort facilities + Utilizing **Windows-based systems** to manage and track maintenance activities + Reading and interpreting **blueprints** and **schematics** to aid in system repairs and improvements + Maintaining and troubleshooting **life-safety systems** , guaranteeing guest and team member safety at all times If you're looking to take your career to the next level in an iconic resort setting, we'd love to have you join our team. **Apply now** and help us maintain the excellence that makes the Grand Hyatt Indian Wells Resort and Villas a premier destination! Click here to spend a 'day in the life' of a hospitality professional at a full-service hotel via our virtual reality experience. **Qualifications:** + Minimum of 5 years of building maintenance experience + Strong knowledge of building systems (HVAC, electrical, mechanical, plumbing) + Experience with life-safety systems + Ability to troubleshoot and repair systems in guest rooms, meeting spaces, and back-of-house areas + Familiarity with preventative maintenance techniques + Proficiency with Windows-based computer systems for maintenance tracking + Ability to read and interpret blueprints and schematics (preferred) + Strong communication skills + Ability to work independently and as part of a team + Flexible and reliable, with the ability to cover shifts as needed **Primary Location:** US-CA-Indian Wells **Organization:** Grand Hyatt Indian Wells Resort and Villas **Pay Basis:** Hourly **Job Level:** Full-time **Job:** Engineering/Facility Maintenance **Req ID:** IND004536 Hyatt is an equal employment opportunity and affirmative action employer. We do not discriminate on the basis of race, color, gender, gender identity, sexual orientation, marital status, pregnancy, national origin, ancestry, age, religion, disability, veteran status, genetic information, citizenship status or any other group protected by law.

Job DescriptionQuality Control Inspector I, Armtec Defense Technologies Armtec Defense Technologies (Armtec) is an operating unit of the TransDigm Group (NYSE: TDG), an industry leader in aerospace and defense products and services. Armtec is comprised of three business units producing subcomponents for ordnance in Coachella, CA; decoy countermeasure flares in Camden AR; and radar countermeasure chaff in Lillington NC. At Armtec, we welcome skilled and enthusiastic people who share our determination and high standards to join us in our mission-critical work supporting the US and allied warfighters who serve us all by defending democracy and protecting freedom. This position is staffed in Coachella, at Armtec's world-class, sole-source production facility for felted fiber nitrocellulose combustible cartridge cases for medium and large caliber military ammunition, and pyrophoric payloads for training grenades. Company Profile Company: Armtec Defense Technologies is an operating unit of the TransDigm Group (NYSE: TDG). Industry: Manufacturing Combustible Ordnance and Countermeasures Job Overview Title: Quality Control Inspector I Job Family: Inspector and Calibration Reports to: Production Supervisor Works with: mid-level managers and supervisors, employees Location: Coachella, California Type: Full-Time Job Summary A Quality Control Inspector I will follow verbal and written procedures to assure product compliance to specifications and detect non-conforming material at the earliest inspection point. They will assist production employees by performing accurate measurements, maintaining required inspection records, and comply with production needs. Primary Responsibilities Performs daily task as required by Inspection Plan. Use measuring instruments and gages to determine specification compliance. Will maintain inspection records and controlled documents. Conduct final acceptance of product. Raise issues when failures occur or when a trend is present. Conducts routine special inspection. Document results of final inspections per requirements. Completed staging of final product as needed. Assist with production operations as requested or required by instruction. Maintain the highest ethical standards, even when challenged from above Understand and live by Armtec's ethics and business conduct policies Qualifications Will stand for long periods of time, lift boxes (up to 50lbs), on and off cars, and may involve repetitive motions. Follow safety rules. Must be available in any shift when needed. Perform daily tasks with little or no supervision. Follow safety rules. Must be dependable, responsible, and accurate. Have the ability to deal with people effectively. Must be able to pass quality written exam as required. Available to work in any shift when needed. Knowledge in metrology is beneficial. Must read and write English and have good math skills. Have good communication skills, make decisions and snap judgments, assist in problem solving, and handle multiple concurring tasks. Must keep accurate records. Some memorization, analyzing, and detailed work will be required. Armtec Competencies Demonstrate ability in the Armtec competencies as an employee: customer focus, ethics and values, problem solving, integrity and trust, functional/technical skills, listening, action-oriented, composure and values diversity. Education & Professional Work Experience Requirements Must be authorized to work in the U.S. To conform to U.S. export control regulations, applicant should be eligible for any required authorization from the U.S. Government High School diploma or equivalent Work Hours 4/10 workweek To Apply Please apply on-line on the Armtec Career Website, ********************* Equal Opportunity Employer, including disability and protected veteran status. Salary Range: $22.00 - 26.81/Hourly Benefits Medical Dental Vision Health Savings Account (HSA) with generous company contribution Flexible Spending Accounts (FSA - Medical & Dependent Care) Life and Accident Death and Dismemberment Insurance Disability Insurance Parent Leave Pay Employee Assistance Program (EAP) Vacation Sick Leave Holidays (8 paid holiday including holiday shutdown weeks in July and December) 401(k) matching Tuition Assistance Powered by JazzHR xHHAktHNDk

Kick off your exciting career in Event Security with Allied Universal Event Services, the go-to leader in crowd management and event staffing. Dive into the action at sports stadiums, concerts, festivals, and convention centers, and thrive on the energy of being where it all happens. Join a lively team that services thousands of venues each year, ensuring safety and fun for everyone. Enjoy the perks of flexible part-time work that fits your lifestyle-ideal for students, retirees, or anyone seeking a dynamic job. We offer job opportunities in event staff, security, and operations. Join our welcoming, collaborative, and innovative team, and benefit from a range of perks depending on your role and hours. At Allied Universal , every day brings a new adventure. Ready to make your mark in the event industry? Join us and be part of the excitement! Job Description BE PART OF THE ACTION! No Experience Needed Greeters, access control, crowd management and more Event Security $19/hr - Guard Card Required Event Staff $18/hr - Non Guard Card All shifts available - Overtime Free transportation (from the Los Angeles area) Free lodging Free meals Allied Universal Event Services is looking to hire Event Security. This position is responsible for checking bags, enforcing access control and implementing policies and procedures for the safety of the guests and owners, while providing superior customer service for the best guest experience. ESSENTIAL JOB DUTIES AND RESPONSIBILITIES: Those duties necessary to meet the minimum requirements of the position. Other duties may be assigned. Assist in all aspects of event day preparation and execution. Allow appropriate entry into each venue, may collect and/or scan tickets, verify wristbands and badges, direct traffic coming in and out of the venue. Screen guests during entry via bag searching, hand wand or metal detector, and ID verification. Protect guests, staff, and venue ownership group assets by watching for security breaches at vital checkpoints. Respond quickly to potential crowd control issues and provide escorts for unruly guests when ejections are warranted. Demonstrate an understanding of the policies, procedures and regulations of different venues, facilities and events. Provide a positive experience for guests as they arrive at your facility entrance, aisle, concourse area or other location Provide guests with helpful directions and/or suggestions that will enhance their entertainment experience. QUALIFICATIONS: To perform this job successfully, the individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skills, and/or experience required. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Must be 18 years of age or older. Must have a high school diploma or equivalent. Licensing requirements are subject to state and/or local laws and regulations and may be required prior to employment. As a condition of employment, candidate must successfully complete a background investigation and a post-offer/pre-employment drug/alcohol test; additional screening may be required if driving a customer or company owned vehicle. Able to use good independent judgment and discretion. Must be able to work overtime as needed. Outstanding oral and written communication skills. PERKS AND BENEFITS: Part-time flexible scheduling under 30 hours/week that fit with your personal life goals 401(k) Sick Pay Ongoing paid training programs and career growth opportunities Employee discounts through our perks program to your favorite restaurants, entertainment venues, and much more! PO 10015 Closing Allied Universal is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race/ethnicity, age, color, religion, sex, sexual orientation, gender identity, national origin, genetic information, disability, protected veteran status or relationship/association with a protected veteran, or any other basis or characteristic protected by law. For more information: *********** If you have difficulty using the online system and require an alternate method to apply or require an accommodation, please contact our local Human Resources department. To find an office near you, please visit: ***********/offices. Requisition ID 2026-1516258

Primo Brands is a leading branded beverage company in North America with a focus on healthy hydration. We are proud to offer an extensive and iconic portfolio of highly recognizable, sustainably sourced, and conveniently packaged branded beverages distributed across more than 150,000 retail outlets. **If you are a current associate of Primo Brands, please apply via my ADP.** This position is seasonal, with the possibility of direct hire and increased compensation upon transition to a permanent role, contingent on performance and other relevant factors **Factory** **Location:** Cabazon, CA **Compensation:** $20.50 / hour **Shift differential** : 6%-8% of base hourly rate paid for applicable hours worked **Schedule** : 12-hour shifts on a rotating 2/2/3 schedule 6am - 6:00pm, Day Shift 6pm-6:00 am, Night Shift Ability to work holidays and weekends per business needs Must be able to attend training for the first few weeks on day shift 6am -6:30pm **Seasonal Benefits:** Sick time Employee discounts 401K with a 5% match Responsibilities Operate, changeover, clean, troubleshoot, and complete basic maintenance according to company standards on production equipment consisting of fillers, labelers, case packers, palletizers, blow mold machines, wrappers, and forklifts Record the following: preventative maintenance activities, quality inspection data, equipment downtime, production output and other key metrics Adhere to safe work practices, good manufacturing practices, and participate in safe behavior observation programs Communicate effectively when issues arise that prevent operating to company standards/procedures Meet or exceed performance metrics including efficiency, production, and downtime Perform mathematical calculations as needed Ensure quality product is sent to customers by completing hourly quality checks Inspect raw materials against quality standards before loading them Interact with team members from various departments (Quality Assurance, Maintenance, etc.) to maximize output and efficiency Attend shift, team, and plant meetings during their scheduled times Measure and continuously improve the line operation as a team and with other technicians Cross-train in other areas to support operations during downtimes Maintain your workstation in an organized and clean manner ensuring safety and good manufacturing practices Focus on safe work practices and high quality while executing duties with a sense of urgency Qualifications **Requirements/Qualifications** High school diploma, GED or equivalent experience Prior experience in clean manufacturing preferred Ability to work the scheduled shift which includes start-up and handover meetings Exposure to high-speed production and/or basic maintenance is preferred Troubleshooting and root cause analysis experience Ability to work on your own and with a team Strong communication skills both face to face and over the radio Computer skills with knowledge of Microsoft applications, SAP experience a plus Forklift experience is preferred, but we are able to train new associates Ability to lift and move 50 lbs. and stand on your feet for extended periods of time throughout the day Ability to work in adverse environmental conditions, including inclement weather and changes in temperature

Primo Brands is a leading branded beverage company in North America with a focus on healthy hydration. We are proud to offer an extensive and iconic portfolio of highly recognizable, sustainably sourced, and conveniently packaged branded beverages distributed across more than 150,000 retail outlets. If you are a current associate of Primo Brands, please apply via my ADP. This position is seasonal, with the possibility of direct hire and increased compensation upon transition to a permanent role, contingent on performance and other relevant factors Factory Location: Cabazon, CA Compensation: $20.50 / hour Shift differential: 6%-8% of base hourly rate paid for applicable hours worked Schedule: 12-hour shifts on a rotating 2/2/3 schedule 6am - 6:00pm, Day Shift 6pm-6:00 am, Night Shift Ability to work holidays and weekends per business needs Must be able to attend training for the first few weeks on day shift 6am -6:30pm Seasonal Benefits: Sick time Employee discounts 401K with a 5% match Responsibilities Operate, changeover, clean, troubleshoot, and complete basic maintenance according to company standards on production equipment consisting of fillers, labelers, case packers, palletizers, blow mold machines, wrappers, and forklifts Record the following: preventative maintenance activities, quality inspection data, equipment downtime, production output and other key metrics Adhere to safe work practices, good manufacturing practices, and participate in safe behavior observation programs Communicate effectively when issues arise that prevent operating to company standards/procedures Meet or exceed performance metrics including efficiency, production, and downtime Perform mathematical calculations as needed Ensure quality product is sent to customers by completing hourly quality checks Inspect raw materials against quality standards before loading them Interact with team members from various departments (Quality Assurance, Maintenance, etc.) to maximize output and efficiency Attend shift, team, and plant meetings during their scheduled times Measure and continuously improve the line operation as a team and with other technicians Cross-train in other areas to support operations during downtimes Maintain your workstation in an organized and clean manner ensuring safety and good manufacturing practices Focus on safe work practices and high quality while executing duties with a sense of urgency Qualifications Requirements/Qualifications High school diploma, GED or equivalent experience Prior experience in clean manufacturing preferred Ability to work the scheduled shift which includes start-up and handover meetings Exposure to high-speed production and/or basic maintenance is preferred Troubleshooting and root cause analysis experience Ability to work on your own and with a team Strong communication skills both face to face and over the radio Computer skills with knowledge of Microsoft applications, SAP experience a plus Forklift experience is preferred, but we are able to train new associates Ability to lift and move 50 lbs. and stand on your feet for extended periods of time throughout the day Ability to work in adverse environmental conditions, including inclement weather and changes in temperature

Job Title: Packaging Quality Control Technician Beaumont Reports To: QC Manager GENERAL PURPOSE OF THE JOB: • Insure all products meet the written quality specifications. Maintain the Quality laboratory. Perform analytical tests on raw ingredients, work in progress, and final products. Monitor and inspect the bagged products and labels before they are shipped to customers. Maintain all quality records as necessary to be in compliance with the USDA and any other regulatory agencies. ESSENTIAL DUTIES AND RESPONSIBILITIES: Daily: • Insure that the proper date code sequence is applied to products and shipping boxes • Conduct the written programs for bag weight control • Randomly inspect final product from each machine • Insure that corrective actions are taken for out of spec product • Maintain the laboratory; order supplies as necessary • Perform analytical tests on products ( FFA, moisture, seasoning, bag fill, air fill, etc) • Inspect incoming lard and oil shipments, perform analytical tests as necessary • Help to maintain a clean and safe processing area • Pre op inspections • ATP Swabs and other quality test. • Make sure all employees are following the GMP's • Preform verification prior to start up and at every change over during the shift. • Follow the HACCP program and all other supporting programs *And any other duties assigned by Supervisor EMPLOYEE SAFETY RESPONSIBILITIES INCLUDE BUT NOT LIMITED TO: • Understanding basic electrical Lock Out Tag Out principles • Wear hearing protection in all areas of the plant • Wear protective eyewear as necessary in lab and when collecting samples from fryer • Slip resistant shoes mandatory • Follow all common employee safety practices • Must understand SDS sheets and the safe use of chemicals • Chemical safety training FOOD SAFETY RESPONSIBILITIES: • Understanding of Good Manufacturing Practices (GMP) • Basic understanding of the HACCP program • Good understanding of the written allergen program • Good understanding of the glass and hard plastics policy • Good understanding of the AIB audit process • Ability to identify food safety violations in the production area • Must follow all food safety regulations EDUCATION AND/OR EXPERIENCE: • High school diploma or general education degree (GED); or one to three months related experience and/or training; or equivalent combination of education and experience. • Basic computer skills needed for data entry. LANGUAGE SKILLS: • Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence. Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization. • Bi-lingual is not required but is a plus. MATHEMATICAL SKILLS: • Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs. REASONING ABILITY: • Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations.

DEFINITION Under the general direction of the Radiology Supervisor/Manager, performs imaging procedures to aid physician in diagnosis and treatments. Performs other related work as assigned. CLASS CHARACTERISTICS This is the advance level class within Special Studies Technologist series. Employees within this class are distinguished from the Special Technologist I by the performance of two or more modalities including the ability to work independently, exercise judgment, and take initiative to complete a specific assignment. Employees at this level receive only occasional instruction or assistance as new or unusual situations arise, and are fully aware of the operating procedures and policies of the work unit. Also, may serve as a lead among the Special Studies Technologist I. POSITION QUALIFICATIONS Any combination of education and experience that would likely provide the required knowledge and abilities is qualifying. A typical way would be: Education Completion of an ACR or ARRT recognized accredited program in Radiology Technology is required; Associated degree in Radiology Technology is desired. Experience One year experience as Special Studies Technologist I with PHH, Inc., OR Required A minimum of two years of experience in performing technical work which must have included as primary responsibility of radiographic examinations and two or more of the following: mammography, magnetic resonance imaging (MRI), computerized tomography (CT), and special procedures (including angiography). Licensure/Certification Possession of valid California CRT license, Fluoroscopy Certification Current BLS ARRT required Specialized training in Interventional Radiography, CT or MRI Registration in CT, MRI, or Vascular Intervention preferred Venipuncture certification within six months of hire/transfer KNOWLEDGE & ABILITIES Knowledge of: Hospital established policies quality assurance program, safety, environmental and infection control policies and procedures. The more common radiology equipment and instruments used in a hospital setting, basis radiography and at least two of the following: Magnetic Resonance Imaging (MRI), Computerized Tomography, mammography, special procedures (Angiography) procedures. Anatomy and Physiology. Processing and evaluating quality images. Ability to: Operate equipment used in Radiology and two of the following: MRI, CT Scan, Mammography and Angiography. Understand, interpret, and apply rules, regulations, standards, and procedures. Keep abreast of developments in the field of expertise. Communicate effectively, both orally and in writing. Prepare necessary reports and records. Establish and maintain effective working relationships with the public, physicians and fellow employees. Manage emergency or crisis situations; requires judgment/action which could result in undesirable patient outcomes. AGE SPECIFIC COMPETENCY Maintains, demonstrates and is assessed on the knowledge and skills necessary to provide for physical, psychosocial and cultural needs appropriate to the age of the patients served on his/her assigned unit.

* Branch Details Job Summary: We are seeking a detail-oriented and dedicated Manufacturing Quality Control (QC) Inspector to join our production team. The QC Inspector will be responsible for ensuring that products meet the company's quality standards and specifications. This position plays a crucial role in maintaining product integrity and safety within the manufacturing process. Key Responsibilities: * Inspect and test raw materials, in-process materials, and finished products to ensure they meet quality standards and specifications. * Perform visual and physical inspections on production lines, identifying any defects or inconsistencies. * Review and approve product samples before mass production. * Work closely with production teams to identify and resolve quality-related issues. * Monitor production processes and ensure compliance with safety and quality regulations. * Document and report inspection results, including discrepancies and corrective actions. * Participate in audits and continuous improvement initiatives to enhance manufacturing quality. * Maintain and calibrate inspection equipment to ensure accuracy. * Assist in the training of new QC personnel and provide ongoing support. * Prepare detailed reports on quality inspections and assist in corrective and preventive actions when needed. Qualifications: * High school diploma or equivalent; additional certification in quality control or manufacturing is a plus. * Proven experience as a QC Inspector in a manufacturing environment (2+ years preferred). * Strong knowledge of quality control standards, testing methods, and inspection techniques. * Ability to read and interpret blueprints, technical drawings, and specifications. * Familiarity with using measuring instruments such as calipers, micrometers, and gauges. * Excellent attention to detail and analytical skills. * Ability to communicate effectively in both written and verbal formats. * Strong problem-solving skills and ability to work independently or as part of a team. * Basic knowledge of industry regulations and safety standards. #BRANCHMURRIETACA Murrieta CA 3145

Trusted Resource Associates (TRA) is seeking a travel Cath Lab Technologist for a travel job in Palm Springs, California. Job Description & Requirements Specialty: Cath Lab Technologist Discipline: Allied Health Professional Start Date: 01/15/2026 Duration: 13 weeks 40 hours per week Shift: 8 hours, days Employment Type: Travel TRA Cardiac Cath Lab Tech TRA is Tenet‘s in-house nationwide contingent pool for Nursing and Allied travel and local contracts. Receive a greater level of Contract security compared to with an outside agency. The Cath Lab Tech is responsible for providing technical and patient support and patient care. Communicates continuously with the physician about patient condition. Assist physician during invasive and noninvasive procedures. Operates all equipment safetly and correctly. Assesses procedure room for equipment functioning and readiness. Obtains supplies for individual cases and ensures all appropriate needs of the Cardiac Cath Laboratory team are met. Participates in perfomance improvement and continuous quality improvement (CQI) activites. The technician is authorized to be in the presence of medication.. BENEFITS - Guaranteed hours for Travel Contracts - Preferred Booking Agreement for Local Contracts - Weekly Pay - Holiday Pay - Contract Security compared to a contract with an outside agency Minimum Education - Formal 2 year radiologic technology training in an AMA approved school which meets requirements for registry by the ARRT - Basic EKG Course Preferred Education BS in Radiology or equivalent Preferred Experience 1 Year providing Cardiac Cath, Radiology Care Required Certification/Licensure - American Registry of Radiologic Technologist (ARRT) in computed tomography; OR - Registered Cardiovasular Invasive Specialist - ARRT - State license if required - American Heart Association BLS - ACLS Our Hire Process - We do qualify our clinicians to meet or exceed the minimum requirements of a travel or local assignment. If you are qualified, we may direct-hire you, reducing the time we can get you to work! When you reach out to a TRA Recruiter for more details, ensure your Vivian profile includes your most updated resume! Trusted Resource Associates (TRA) Job ID #500220. Pay package is based on 8 hour shifts and 40 hours per week (subject to confirmation) with tax-free stipend amount to be determined. Benefits 401k retirement plan Weekly pay Holiday Pay Referral bonus

Job Description Our Story At Lifekind Health we strive every day to live up to that definition by providing the best care possible for our complex patient population. Our team of medical doctors, psychologists, chiropractors, acupuncturists, dietitians, and massage therapists work together within a revolutionary transdisciplinary model that addresses the quadruple aim of healthcare: enhancing patient experience, improving patient health, reducing healthcare costs, and increasing employee satisfaction. Visit our website at *********************** About the Role: The Licensed Lab Technician plays a critical role in supporting healthcare providers by performing precise laboratory tests and procedures that aid in the diagnosis, treatment, and prevention of diseases. This position requires meticulous attention to detail to ensure the accuracy and reliability of test results, which directly impact patient care decisions. The technician will operate and maintain sophisticated laboratory equipment, adhering strictly to safety and quality control protocols. Collaboration with medical staff and adherence to regulatory standards are essential to maintain the integrity of laboratory operations. Ultimately, the Licensed Lab Technician contributes to the overall effectiveness of healthcare delivery by providing timely and accurate laboratory data. Minimum Qualifications: Valid licensure as a Laboratory Technician as required by state or national regulatory bodies. Completion of an accredited laboratory technician training program or equivalent education. Proven experience working in a clinical laboratory setting with familiarity in specimen collection and testing procedures. Strong understanding of laboratory safety standards and quality control measures. Basic computer skills for data entry and laboratory information system usage. Preferred Qualifications: Certification from a recognized professional organization such as the American Society for Clinical Pathology (ASCP). Experience with advanced laboratory instrumentation and molecular diagnostic techniques. Knowledge of laboratory information management systems (LIMS) and electronic health records (EHR). Additional training or coursework in microbiology, hematology, or clinical chemistry. Demonstrated ability to work effectively in a multidisciplinary healthcare team. Responsibilities: Collect, prepare, and analyze biological specimens such as blood, urine, and tissue samples following established protocols. Operate, calibrate, and maintain laboratory instruments and equipment to ensure optimal performance and accuracy. Perform routine and specialized laboratory tests, documenting results accurately and promptly in patient records. Adhere to all safety, quality control, and regulatory guidelines to maintain a safe and compliant laboratory environment. Collaborate with healthcare professionals to communicate test results and assist in troubleshooting laboratory issues. Maintain inventory of laboratory supplies and ensure proper storage and disposal of biohazardous materials. Participate in continuing education and training to stay current with advancements in laboratory technology and procedures. Skills: The Licensed Lab Technician utilizes technical skills daily to perform accurate specimen collection and laboratory testing, ensuring reliable results that inform patient care. Attention to detail and analytical skills are essential for interpreting test outcomes and maintaining quality control standards. Communication skills are employed to effectively collaborate with healthcare providers and document findings clearly. Proficiency with laboratory instruments and information systems supports efficient workflow and data management. Additionally, problem-solving skills are critical when troubleshooting equipment issues or addressing unexpected test results, ensuring continuous laboratory operation.

Job Description The Technician is responsible for performing a variety of general maintenance and repair duties across the property to ensure all facilities, equipment, and systems are functional, safe, and well-maintained. This role supports the Engineering Department in routine upkeep, troubleshooting, and emergency repair services to maintain optimal operations and guest satisfaction. ESSENTIAL DUTIES AND RESPONSIBILITIES: Provide friendly, prompt, and professional service to guests and team members. Conduct routine inspections, repairs, and preventative maintenance on facility equipment and property systems. Repair or replace broken equipment and fixtures throughout the property as needed. Maintain a clean, safe, and organized work environment, complying with all safety protocols. Assist with basic troubleshooting and repairs involving electrical, plumbing, and carpentry systems. Operate hand tools, power tools, lifts, and other maintenance equipment safely and effectively. Perform general property maintenance including furniture repair, door adjustments, light fixture replacements, and minor construction tasks. Safely handle and utilize chemicals, including those used for pool maintenance, while following appropriate personal protective equipment (PPE) protocols. Test pool and spa water to maintain correct chlorine, pH, and alkalinity levels; log and respond to abnormal readings. Maintain and repair pool and spa filtration systems, including skimmer and pump baskets, jets, valves, and tile. Follow safety policies and procedures including Lock Out/Tag Out (LOTO), MSDS compliance, hazard communication, and proper PPE usage. Communicate effectively with other departments to respond to maintenance requests in a timely and professional manner. Perform other related duties as assigned. SUPERVISORY RESPONSIBILITIES: This position does have direct supervisory responsibilities but may provide guidance or support to other team members. QUALIFICATIONS: Basic knowledge of building systems and repair practices, including plumbing, electrical, carpentry, and HVAC. Ability to safely operate and maintain tools, machinery, and equipment related to general facility upkeep. Understanding of workplace safety requirements, including chemical handling and emergency response. Strong communication skills; able to follow directions and communicate effectively via two-way radios. Ability to work independently or as part of a team while maintaining a focus on safety and service quality. EDUCATION and/or EXPERIENCE: High school diploma or equivalent preferred. Technical or vocational training in a maintenance-related trade (e.g., HVAC, electrical, plumbing) preferred. Minimum of 1-2 years of experience in general maintenance, repair, or a technical trade required. Basic understanding of mechanical, electrical, or plumbing systems. Experience performing routine maintenance tasks, repairs, and inspections. Familiarity with hand and power tools and the ability to follow safety procedures. Prior experience in a commercial, hospitality, or facilities environment preferred. Ability to work independently, follow instructions, and complete work orders in a timely manner. Willingness to work flexible hours, including nights, weekends, and holidays as needed. LICENSES, CERTIFICATES, REGISTRATIONS: Must have successfully completed a background check and obtained a gaming license issued by the Morongo Gaming Agency, as required. LANGUAGE SKILLS: Must be able to read and interpret documents in English, such as instructions, guidelines, policies, and procedures. Must also be able to communicate clearly and effectively with team members, management, and guests. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform these functions. Communication Skills: Must be able to communicate clearly and professionally with supervisors, team members, vendors, and other departments in person and via radio; must be able to follow written and verbal instructions and relay technical issues accurately. Lifting and Carrying: Frequently lifts, carries, and moves tools, parts, equipment, and supplies weighing up to 50 pounds; may assist with heavier items using carts or team lifting techniques. Manual Dexterity: Regularly uses hands and fingers to operate hand tools, power tools, diagnostic devices, and control systems; must perform technical repairs and installations with precision. Mobility: Frequently walks, climbs ladders, bends, kneels, crouches, and crawls to access mechanical areas, equipment, and tight spaces; must be able to perform tasks in a variety of physical positions and environments. Stationary Work: Occasionally remains seated to complete documentation, review service manuals, or input data into computerized systems. Tool Operation: Regular use of maintenance tools, diagnostic instruments, electronic testing devices, computers, and lifts; responsible for proper handling and safe operation of all tools and equipment. Visual Acuity: Requires strong near and far vision, depth perception, and the ability to read schematics, wiring diagrams, technical manuals, and equipment displays; must be able to identify mechanical or electronic faults accurately. Working Conditions: Routinely works in mechanical rooms, utility spaces, and operational areas both indoors and outdoors; exposed to loud noise, high and low temperatures, moving machinery, dust, chemicals, electrical systems, and a smoking environment in or near the casino or public areas. WORK ENVIRONMENT: This is a dynamic, fast-paced environment that requires the ability to adapt and perform under pressure. The casino operates with moderate to loud noise levels and is a smoking environment, requiring team members to work comfortably in these conditions. WORKING HOURS: Morongo Casino Resort & Spa operates 24 hours a day, 365 days a year; therefore, flexibility in scheduling is essential. Team members must be available to work shifts that may include evenings, weekends, holidays, and special events. Schedules are subject to change based on business needs and may include overtime, as well as work on both weekdays and weekends. EQUAL EMPLOYMENT OPPRTUNITY (EEO) AND INDIAN PREFERENCE: Morongo Casino Resort & Spa is an Equal Opportunity Employer and gives hiring preference to qualified Native Americans as allowed by law. We consider all applicants without regard to race, color, religion, sex, sexual orientation, gender identity, age, disability, veteran status, or national origin. We provide reasonable accommodations to qualified individuals with disabilities as required by the ADA. If you need help or an accommodation during the hiring process, please contact Human Resources.

Responsibilities include, but not limited to the programming, maintenance and operation of all audio, video components, and lighting assets in respect to all entertainment formats. Essential Duties and Responsibilities (other duties may be assigned) * Program, operate, troubleshoot, diagnose, repair and provide preventative maintenance (such as cleaning) for intelligent and conventional lighting systems. Execute lighting shows in collaboration with musical performers exercising discretion and judgment to ensure maximum entertainment value. * Operate, troubleshoot, diagnose, repair and provide preventative maintenance (such as cleaning) for audio systems including the casinos music and paging system * Program, operate, troubleshoot, diagnose, repair and provide preventive maintenance (such and cleaning and replacement) of all video service to include projectors and TV's in various casino and hotel zones. * Assist with entertainers load-in and set up of equipment. * Choreograph effective sound checks maintaining casino' standards for both quality sound mix and volume control. * Train marketing and floor supervisors for appropriate volume control in various casino and hotel zones. * Establish and maintain relationships with audio and lighting hardware and software vendors. Process service requests for approval, Obtains estimates for purchases following currently established purchasing procedures. Complete purchase requisitions, as needed, for approval. * Inventories lighting and audio equipment before and after each performance for reconciliation purposes. * Provide excellent guest service. * Must comply with all applicable ACCRS and SRC System of Internal Controls, Standard Operating Procedures and all Tribal Regulations. Supervisory Responsibilities None Access to Sensitive Areas and Information Per the ACGC Access Matrix Signatory Ability None

Quality Control Inspector I, Armtec Defense Technologies Armtec Defense Technologies (Armtec) is an operating unit of the TransDigm Group (NYSE: TDG), an industry leader in aerospace and defense products and services. Armtec is comprised of three business units producing subcomponents for ordnance in Coachella, CA; decoy countermeasure flares in Camden AR; and radar countermeasure chaff in Lillington NC. At Armtec, we welcome skilled and enthusiastic people who share our determination and high standards to join us in our mission-critical work supporting the US and allied warfighters who serve us all by defending democracy and protecting freedom. This position is staffed in Coachella, at Armtec's world-class, sole-source production facility for felted fiber nitrocellulose combustible cartridge cases for medium and large caliber military ammunition, and pyrophoric payloads for training grenades. Company Profile Company: Armtec Defense Technologies is an operating unit of the TransDigm Group (NYSE: TDG). Industry: Manufacturing Combustible Ordnance and Countermeasures Job Overview Title: Quality Control Inspector I Job Family: Inspector and Calibration Reports to: Production Supervisor Works with: mid-level managers and supervisors, employees Location: Coachella, California Type: Full-Time Job Summary A Quality Control Inspector I will follow verbal and written procedures to assure product compliance to specifications and detect non-conforming material at the earliest inspection point. They will assist production employees by performing accurate measurements, maintaining required inspection records, and comply with production needs. Primary Responsibilities Performs daily task as required by Inspection Plan. Use measuring instruments and gages to determine specification compliance. Will maintain inspection records and controlled documents. Conduct final acceptance of product. Raise issues when failures occur or when a trend is present. Conducts routine special inspection. Document results of final inspections per requirements. Completed staging of final product as needed. Assist with production operations as requested or required by instruction. Maintain the highest ethical standards, even when challenged from above Understand and live by Armtec's ethics and business conduct policies Qualifications Will stand for long periods of time, lift boxes (up to 50lbs), on and off cars, and may involve repetitive motions. Follow safety rules. Must be available in any shift when needed. Perform daily tasks with little or no supervision. Follow safety rules. Must be dependable, responsible, and accurate. Have the ability to deal with people effectively. Must be able to pass quality written exam as required. Available to work in any shift when needed. Knowledge in metrology is beneficial. Must read and write English and have good math skills. Have good communication skills, make decisions and snap judgments, assist in problem solving, and handle multiple concurring tasks. Must keep accurate records. Some memorization, analyzing, and detailed work will be required. Armtec Competencies Demonstrate ability in the Armtec competencies as an employee: customer focus, ethics and values, problem solving, integrity and trust, functional/technical skills, listening, action-oriented, composure and values diversity. Education & Professional Work Experience Requirements Must be authorized to work in the U.S. To conform to U.S. export control regulations, applicant should be eligible for any required authorization from the U.S. Government High School diploma or equivalent Work Hours 4/10 workweek To Apply Please apply on-line on the Armtec Career Website, ********************* Equal Opportunity Employer, including disability and protected veteran status. Salary Range: $22.00 - $26.81/Hourly Benefits Medical Dental Vision Health Savings Account (HSA) with generous company contribution Flexible Spending Accounts (FSA - Medical & Dependent Care) Life and Accident Death and Dismemberment Insurance Disability Insurance Parent Leave Pay Employee Assistance Program (EAP) Vacation Sick Leave Holidays (8 paid holiday including holiday shutdown weeks in July and December) 401(k) matching Tuition Assistance

Job Description DEFINITION Under the general direction of the Radiology Supervisor/Manager, performs imaging procedures to aid physician in diagnosis and treatments. Performs other related work as assigned. CLASS CHARACTERISTICS This is the advance level class within Special Studies Technologist series. Employees within this class are distinguished from the Special Technologist I by the performance of two or more modalities including the ability to work independently, exercise judgment, and take initiative to complete a specific assignment. Employees at this level receive only occasional instruction or assistance as new or unusual situations arise, and are fully aware of the operating procedures and policies of the work unit. Also, may serve as a lead among the Special Studies Technologist I. POSITION QUALIFICATIONS Any combination of education and experience that would likely provide the required knowledge and abilities is qualifying. A typical way would be: Education Completion of an ACR or ARRT recognized accredited program in Radiology Technology is required; Associated degree in Radiology Technology is desired. Experience One year experience as Special Studies Technologist I with PHH, Inc., OR Required A minimum of two years of experience in performing technical work which must have included as primary responsibility of radiographic examinations and two or more of the following: mammography, magnetic resonance imaging (MRI), computerized tomography (CT), and special procedures (including angiography). Licensure/Certification Possession of valid California CRT license, Fluoroscopy Certification Current BLS ARRT required Specialized training in Interventional Radiography, CT or MRI Registration in CT, MRI, or Vascular Intervention preferred Venipuncture certification within six months of hire/transfer KNOWLEDGE & ABILITIES Knowledge of: Hospital established policies quality assurance program, safety, environmental and infection control policies and procedures. The more common radiology equipment and instruments used in a hospital setting, basis radiography and at least two of the following: Magnetic Resonance Imaging (MRI), Computerized Tomography, mammography, special procedures (Angiography) procedures. Anatomy and Physiology. Processing and evaluating quality images. Ability to: Operate equipment used in Radiology and two of the following: MRI, CT Scan, Mammography and Angiography. Understand, interpret, and apply rules, regulations, standards, and procedures. Keep abreast of developments in the field of expertise. Communicate effectively, both orally and in writing. Prepare necessary reports and records. Establish and maintain effective working relationships with the public, physicians and fellow employees. Manage emergency or crisis situations; requires judgment/action which could result in undesirable patient outcomes. AGE SPECIFIC COMPETENCY Maintains, demonstrates and is assessed on the knowledge and skills necessary to provide for physical, psychosocial and cultural needs appropriate to the age of the patients served on his/her assigned unit.