Quality assurance technician jobs in Knoxville, TN - 110 jobs

All

Quality Assurance Technician

Quality Technician

Production Technician

Quality Control Technician

Quality Control Inspector

Quality Associate

Manufacturing Technician

Production Technician I
Keurig Dr Pepper 4.5
Quality assurance technician job in Knoxville, TN
Job Overview:The Production Technician I (N2 shift Sign-on Bonus below) is responsible for monitoring Keurig Dr Pepper's production processes; including operating manufacturing equipment and maintaining compliance with Keurig Dr Pepper's high standards for safety and quality. This role will be engaged and understand initiatives to improve safety, quality, delivery, cost and culture. Shift and Schedule:N2 Friday - Sunday from 5:00pm-5:30am. What you will do: Safety Comply with all safety policies and procedures and demonstrate safe behaviors at all times. Participate in discussions and take action on feedback provided through our Safety Observation and Peer to Peer safety programs. Maintain a healthful and safe environment and report any safety incidents and/ or injuries to appropriate personnel. Comply with all safety training initiatives. Quality:Perform standard work and understands where to find Standard Operating Procedures (SOP) at the site level. Understand and comply with quality systems and policies (Quality Data System (QDS), Safe Quality Food (SQF), Good Manufacturing Practices (GMP), and Hazard Analysis Critical Control Points (HACCP)). Demonstrate knowledge and articulate understanding of quality terminology and metrics. Participate and contribute information and opinions during Root Cause Corrective Action (RCCA) for quality events. Contribute information for and participate in internal audits as appropriate. Accurately perform quality checks and maintain accurate records. Delivery: Actively engaged in learning machine operations and apply learnings to perform work to standard. Populate and present Daily Management System (DMS) Line Board with hourly data on production, Overall Equipment Efficiency (OEE), Scrap, Safety, Quality and articulate issues and/or opportunities. Communicate equipment performance and issues effectively during shift handoff. Complete changeovers and cleans, including line clearance & pre-checks, following standard work. Perform documentation and verification activities in all applicable systems (COLOS- Software package used for labeling, PeopleSoft, Systems, Applications & Products (our ERP system) Manufacturing Execution System, Trackwise and paper records) to ensure timely release. Escalate line issues and opportunities, including initiation of Root Cause Corrective Action activities. During maintenance calls, remain at line to provide information, support, and use the event as a learning opportunity. Able to demonstrate proficiency of all jobs/equipment in assigned areas through certification process. Cost: Actively engage in learning and following standard work processes and procedures. Demonstrate an active level of curiosity to learn critical drivers of waste and line efficiency. Understand and actively work to reduce line scrap and material usage variance. Recognize, define and articulate importance of the following terms: waste, cost per cup and cups/ labor hour. Respond to quality and waste issues by stopping production if necessary and escalating the issues. Generate productivity ideas and support continuous improvement teams working on reducing waste. Participate in and learn from Root Cause Corrective Action activities. Team Culture: Participates in our Team Culture as it pertains to dependability, teamwork, professional behavior and participation Dependability: regularly arrives to work on time, returns timely from breaks, meets attendance guidelines and consistently arrives on time and prepared for team meetings. Teamwork: demonstrates the ability to work effectively with others, contributes fair share of team's work, appropriately communicates status of work during shift transitions, demonstrates a willingness to help other team members, demonstrate the ability to receive and provide constructive feedback, and demonstrates a high level of cooperation across the site. Shares knowledge/skills with team members. Respectful and Professional Behavior: models appropriate communication and behavior amongst one another, demonstrates self-awareness and takes actions to continuously improve, interacts respectfully and professionally with supervisors and coworkers, complies with organizational rules, policies and procedures. Participation: demonstrates a willingness to participate in daily meetings, completes tasks in work area, accepts responsibility for one's decisions and action and positively adapts to the changing business environment. Integrity: approaches actions with moral character and ethics. Sign-on bonus (less taxes): You will receive a sign-on bonus in the gross amount of $3,000. 00 (the "Sign-on Bonus"), to be paid in three separate payments. The first payment will be in the amount of $1,000. 00 (less applicable taxes) at 3 months 6 months and 9 months. Please note that if you resign for any reason within one year of the last payment date, you will be required to reimburse the Company the full amount of your Sign-on Bonus. Total Rewards:• Pay starting at $19. 43 per hour. The employee will move to a higher rate of $20. 46 per hour in the quarter after their 6-month anniversary. Where Applicable:Shift Differential:$3. 00• Benefits eligible day one!! • Benefits, subject to eligibility, and collective bargaining agreements (where applicable): Medical, Dental, Vision, Disability, Paid Time Off (including vacation and sick time), 401k with company match, Tuition Reimbursement, and Mileage Reimbursement Requirements:What you must have:Strong mechanical aptitude of processing and packaging machine operations; with a preference of some manufacturing experience. Ability to make decisions, communicate and problem solve. Self-motivated team player who models appropriate communication and behavior amongst one another. Ability to get along with others, be punctual, demonstrate satisfactory attendance, and follow instructions from others. Strong computer and software skills (Microsoft Office Suite, Enterprise Resource Planning systems, etc) Basic mathematical skills to make production calculations Experience with Systems, Applications & Products (our Enterprise Resource Planning system) preferred. Able to work in a manufacturing environment, within a variety of environmental conditions. Ability to lift 30 pounds on a regular basis and 50 pounds occasionally. Ability to lift, bend, stretch and stand during full shift. Ability to push/pull up to 1,500 pounds using supplied equipment. Ability to frequently kneel, squat, bend, stoop, twist, and reach overhead with repetitive motions. Ability to meet all requirements to wear respiratory protection. Ability to walk up and down stairs. Ability to work in a variety of temperature and humidity conditions. Company Overview: Keurig Dr Pepper (NASDAQ: KDP) is a leading beverage company in North America, with a portfolio of more than 125 owned, licensed and partner brands and powerful distribution capabilities to provide a beverage for every need, anytime, anywhere. We operate with a differentiated business model and world-class brand portfolio, powered by a talented and engaged team that is anchored in our values. We work with big, exciting beverage brands and the #1 single-serve coffee brewing system in North America at KDP, and we have fun doing it!Together, we have built a leading beverage company in North America offering hot and cold beverages together at scale. Whatever your area of expertise, at KDP you can be a part of a team that's proud of its brands, partnerships, innovation, and growth. Will you join us?We strive to be an employer of choice, providing a culture and opportunities that empower our team of ~29,000 employees to grow and develop. We offer robust benefits to support your health and wellness as well as your personal and financial well-being. We also provide employee programs designed to enhance your professional growth and development, while ensuring you feel valued, inspired and appreciated at work. Keurig Dr Pepper is an equal opportunity employer and recruits qualified applicants and advances in employment its employees without regard to race, color, religion, gender, sexual orientation, gender identity, gender expression, age, disability or association with a person with a disability, medical condition, genetic information, ethnic or national origin, marital status, veteran status, or any other status protected by law. A. I. Disclosure: KDP uses artificial intelligence to assist with initial resume screening and candidate matching. This technology helps us efficiently identify candidates whose qualifications align with our open roles. If you prefer not to have your application processed using artificial intelligence, you may opt out by emailing your resume and qualifications directly to kdpjobs@kdrp. com in lieu of clicking Apply. Please include the job title and location or Job ID # in the email subject line.
$19 hourly Auto-Apply 23d ago

Looking for a job?

Let Zippia find it for you.

Construction Quality Assurance Technician
Bel Environmental Engineering
Quality assurance technician job in Knoxville, TN
Discover your potential at BEL Environmental Engineering, LLC! We are experts in the Solid Waste industry and work as a team to solve complex challenges and provide our clients with a full spectrum of talent and experience. A career at BEL is different. We are a small and employee focused firm that provides opportunities for your career to grow along with us. In this role, you will be challenged and encouraged to turn big ideas into solid results and take ownership of your contributions. We are currently seeking a Construction Quality Assurance Technician (CQA) to join our team of dedicated and passionate professionals. **Signing Bonus** RESPONSIBILITIES Perform construction quality control inspections at various environmental construction projects Perform routine environmental testing and data analysis Observe and thoroughly document construction procedures Communicate daily with the Client and the Project Manager Work under a Project Manager to assist in various Construction Quality Assurance projects. Assist Project Managers with certification reports 90% Field Work, 10% office, extended travel required
$28k-43k yearly est. 60d+ ago
Manufacturing Technician
Actalent
Quality assurance technician job in Knoxville, TN
Job Title: Manufacturing TechnicianJob Description Join our innovative team as a Manufacturing Technician, where you will play a vital role in assembling, testing, repairing, and calibrating electronic and mechanical products used in industrial monitoring applications. This position offers a diverse range of responsibilities, from bench assembly to customer interaction, in a collaborative and supportive environment that values quality work, continuous learning, and work-life balance. Responsibilities * Assemble mechanical and electronic components into finished products. * Perform light electronics manufacturing, including soldering and wiring. * Conduct functional testing and quality checks on parts and completed assemblies. * Troubleshoot, repair, and calibrate electronic hardware as needed. * Document production, repairs, and calibration results accurately. * Maintain a clean, organized, and safe work environment. * Manage and track inventory for parts needed for upcoming production orders. * Perform light programming or configuration of PCBs and battery packs following established procedures. * Collaborate with team members to meet production schedules and deadlines. * Provide periodic customer support via email or phone related to repairs and shipments. * Follow company policies, safety guidelines, and industry regulations. Essential Skills * High school diploma required; two-year technical degree or equivalent hands-on experience preferred. * Strong mechanical and technical aptitude. * Attention to detail with a quality-focused mindset. * Ability to troubleshoot basic hardware and assembly issues. * Comfortable using hand tools and basic test equipment. * Basic computer skills, including email and office software. * Strong organizational and time management skills. * Clear communication skills and ability to work effectively in a team environment. Additional Skills & Qualifications * Experience with electronics assembly or soldering. * Experience performing quality control or inspection procedures. * Familiarity with production or manufacturing environments. * Experience with inventory management systems (SOS Inventory a plus). * Experience with equipment calibration or light device programming. Work Environment This role is based in a workshop and desk environment, where you will be part of a small, family-oriented company that is rapidly growing. The work environment encourages collaboration and offers opportunities for personal growth and development. Job Type & Location This is a Contract to Hire position based out of Knoxville, TN. Pay and Benefits The pay range for this position is $21.00 - $24.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Knoxville,TN. Application Deadline This position is anticipated to close on Feb 3, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options.
$21-24 hourly 7d ago
Quality Associate I - Nights - $21.50 - $22.64
Titan Specialty 4.6
Quality assurance technician job in Clinton, TN
Job Purpose Statement: Quality Associate I position is responsible to support the production processes to ensure only acceptable products are released for shipment or use. The production process supported can change as business demands change. A high attention to detail and ability to do repetitive tasks with precision is required. Summary of Responsibility: Inspect products for all defects using standard procedures and specifications. Make repairs to product to restore them to cosmetic standards. Perform routine checks or audits as assigned. Apply labels or identification as needed. Mark Defects as required. Communicate any non-conformance to production and quality. Keep the workplace clean and orderly. Achieve inspection rates as assigned to maintain assigned targets. Interact with production associates to address any issues and prevent non-conformances Handle product and organize as assigned. Mix production supplies as required to specified recipes. Interface with computer software and testing equipment to document information as needed. Complete calibration, diagnostic and repair work on machinery to maintain uptime or recover from any downtime events. Perform other work as directed by Supervision. Qualifications Education, Experience and Skills Required: High School diploma or GED required Minimum of 1 year in a manufacturing/distribution operation preferred Ability to work in a fast-paced environment while meeting production and quality goals Ability to obtain and maintain a valid forklift or equipment license as needed or required Must read, write and communicate in English Ergonomic & Physical Requirements: Must be able to meet the Ergonomic as well as the Physical Base Score for this position. Standing or Walking up to 90% of the day Lift / Carry 25lb constantly, up to 100lb occasionally Push / Pull 50lb constantly, up to 150lb occasionally Grasp 75lb Pinch 15lb Lift bulky objects Any lifting over 70 lbs. must be completed with assistance i.e. mechanical or individual. Full range of motion required: Cervical, Shoulders, Elbow, Wrist, Fingers, Hands, Truck Twist, and Feet. Ability to wear PPE as required Working Conditions may include: moderate noise, moving mechanical parts, static shock, high temperatures. Elevated work surfaces, odors, dust
$52k-67k yearly est. 13d ago
Quality Technician
Kelvion Products Inc.
Quality assurance technician job in Knoxville, TN
Job Description Kelvion, one of the leading global manufacturers of heat exchangers is seeking to hire a detail-oriented Quality Technician to work with our Quality Team at our Paducah, Kentucky location. The primary responsibility of the Quality Technician will be to perform incoming inspections to prevent non-conforming parts or materials from being used in the manufacturing process. In addition, this individual will assist in maintaining the Quality Management System (QMS) for Kelvion. This will include process auditing, product quality objectives and other activities related to the manufacturing process. OVERALL OBJECTIVES OF ROLE To improve the overall quality of products being manufactured and ensuring conformance to engineering and quality standards are met by performing receiving inspections on incoming parts and materials. PRIMARY CUSTOMER FOCUS To ensure Kelvion's Standard of Excellence, which includes quality, safety and functionality, is evident in the work completed by the Quality Department, guaranteeing customer satisfaction. RESPONSIBILITIES & DUTIES Perform local deliveries to customer and pick-ups from local vendors Initiate and maintains tool program Assist in determining the room cause for quality problems Assist in issuing corrective actions for non-conforming material Audit internal processes for conformance Perform inspections on manufactured products, works in process and finishing goods, to ensure procedures are being followed and the products meet the specified standards. Initiate “Quality Alerts” when non-conformances are identified Be able to perform continue improvement activities, such as Lean Manufacturing, 6S Kaizen events, workplace organization, etc. Ensure inspection records and reports are kept in a timely manner Build and retain local customer relationships for quality needs. RESPONSIBILITIES - Safety To help ensure that all our employees go home safely at the end of their working day. RESPONSIBILITIES - Quality To ensure Kelvion's Standard of Excellence, which includes quality, is incorporated into every product we produce. Will adhere to all quality requirements that are inside of the Quality Management system. RESPONSIBILITIES - Corporate / Site Follow all company policies and procedures, including but not limited to Global Code of Business Principles, Code of Ethics and Business Conduct, Operational Framework To be part of & to promote Knoxville Standard of Excellence which incorporates high standard of ethical behavior, to promote a culture of honesty and integrity, and one team culture. All employees are expected to follow government and corporate laws, rules, regulations, policies, and procedures. REQUIREMENTS (KNOWLEDGE, SKILLS & ABILITIES) Must exhibit good interpersonal skills and be a “Team” player. Be able to deal with change and respond quickly to a fast-paced environment. Perform duties in an assertive, hands-on manner, with good attention to detail. Must possess good time management skills. Must possess good analytical problem-solving skills. Shall possess a basic understanding of statistical concepts. The ideal candidate is a fast learner with the ability to work with minimal supervision and cooperate in a team environment. Be able to read prints and product drawings. Be able to perform inspections using common measuring equipment and devices, such as gauges, micrometers, and other measure equipment. Microsoft Word, Excel, and PowerPoint as well as have excellent math skills and ability to process numbers quickly to produce charts EDUCATION AND EXPERIENCE (required levels) Minimum of a High School Diploma Possess a working knowledge of the Association of American Railroads (AAR) M-1003 standards Must have three to five (3-5) years of experience in a manufacturing environment. PHYSICAL REQUIREMENTS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently required to stand; use hands to finger, handle, or feel; and reach with hands, arms, and shoulders. The employee is occasionally required to walk; sit; climb or balance; stoop, kneel, crouch, or crawl; and talk and hear. The employee must regularly hand lift and/or move objects up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus.
$24k-33k yearly est. 14d ago
Quality Assurance Technician
Merritt Precision LLC 4.6
Quality assurance technician job in Sweetwater, TN
Job DescriptionDescription: Since 2004, Merritt Precision has specialized in large-format CNC machining solutions for a wide range of sophisticated composite parts. Experience combined with a focus on relationships has helped Merritt Precision bring our customers' most ambitious ideas to reality and success in the marketplace. With locations in Merritt Island, FL, and Sweetwater, TN, Merritt Precision provides 3D design, scanning, milling, and tooling services to customers with diverse composite needs. The Quality Assurance Technician ensures all parts produced by Merritt Precision meet or exceed customer specifications and company quality standards. This role plays a key part in maintaining the integrity of our products through inspection, documentation, and continuous improvement. The ideal candidate will have a strong attention to detail, hands-on experience with composite manufacturing, and a proactive approach to identifying and resolving quality issues. Requirements: Key Responsibilities Conduct in-process and final inspections on composite tooling and fabricated components using precision measuring tools and visual standards. Verify that all parts meet dimensional, functional, and aesthetic requirements based on customer drawings and specifications. Maintain accurate, detailed, and organized inspection records and quality documentation. Collaborate closely with production teams to identify, document, and resolve nonconformances in real time. Assist in the calibration and maintenance of inspection and measurement equipment. Evaluate incoming chemicals and materials to ensure they meet production and quality standards. Develop and maintain Standard Operating Procedures (SOPs) that support consistent, high-quality outcomes. Participate in root cause analysis and corrective/preventive action (CAPA) processes. Support internal process audits and quality improvement initiatives. Uphold compliance with company standards, customer requirements, and applicable industry regulations. Qualifications Required High school diploma or equivalent. Strong attention to detail and commitment to precision. Hands-on experience using calipers, micrometers, height gauges, Barcol impressor, and other measuring tools. Familiarity with composites manufacturing processes, including lamination and gelcoat finishing. Proficiency in Microsoft Office and/or inspection reporting software. Basic ability to read and interpret blueprints, drawings, and technical specifications. Excellent written and verbal communication skills, with clear documentation practices. Preferred Experience with ISO 9001 or AS9100 quality systems. Knowledge of CMM inspection, 3D scanning equipment, or related metrology tools. Prior experience in aerospace, marine, or advanced manufacturing environments. Why Join Merritt Precision? At Merritt Precision, we take pride in craftsmanship, innovation, and collaboration. You'll be part of a skilled, supportive team that values integrity, quality, and long-term relationships-both with our employees and our customers.
$25k-34k yearly est. 29d ago
Quality Control Lab Technician
Longenecker & Associates
Quality assurance technician job in Oak Ridge, TN
Job Description Longenecker & Associates (L&A) seeks a motivated Quality Control Lab Technician to contribute to our mission supporting our work at Centrus Energy in Oak Ridge, TN. L&A is a woman-owned small business and trusted partner enabling critical missions across the U.S. Department of Energy (DOE) complex for more than 30 years. We contribute to DOE's nuclear security and environmental remediation enterprise by providing the highest-caliber staff and experts. L&A is unconditionally committed to mission success and the well-being of employees, the nation and the environment. Our team members are passionate about building a healthier environment for generations to come. We are a community that interfaces and effectively communicates with all levels of management and government. If you have a passion for excellence, seek opportunities to engage in mission critical work, and consistently exceed expectations, apply now to join our professional family. POSITION DESCRIPTION This position is responsible for maintaining quality control processes, testing products, and recording and analyzing results gathered to ensure products meet quality specifications. This position will support quality by performing tests of components according to safety standards, standard operating procedures, and other related standards. Major Duties and Responsibilities: Perform accurate analysis following appropriate standard test methods and report data in a timely manner Operate various analytical instrumentation for chemical and physical testing such as analytical balances, ovens, wet chemistry, and tensile testing Keep all laboratory instrumentation and equipment calibrated and in working order Document inspection results in logbooks, worksheets, and information systems Verify inspection data to determine conformance and compliance to specifications Interface/communicate with engineers and/or managers to describe inspection results Document, track, and complete nonconformance reports Detect erroneous inspection data and troubleshoot instrumentation to correct Conduct Measurement System Analysis Maintain clean and organized laboratory work environment Practice safe working behaviors and adhere to safety policies, guidelines, and procedures Train new personnel on QC test methods, procedures, and work instructions Maintain an inventory of laboratory supplies and place orders when supplies are required Other projects as assigned EDUCATION REQUIREMENTS Bachelor's degree in a science field (Chemistry, Biology, Physics); OR an Associate's degree in chemical technology, or equivalent, with 1+ years of experience as a quality control laboratory technician; OR a High School diploma with 3+ years of experience as quality control laboratory technician MINIMUM QUALIFICATIONS Knowledge of basic laboratory equipment, analytical testing methods and results reporting Knowledge of basic calibration techniques and ability to perform calibration of instruments as required Strong mathematical skills including ability to calculate results such as averages, percentages, and metric conversions Understand basic statistical techniques sufficient for evaluation of measurement data trends Experience working in a laboratory, operating scientific equipment, and safely handling chemicals Ability to write procedures and reports Strong work ethic, professionalism, attention to detail, and ability to follow written procedures such as SOPs Ability to work independently and within team environments Must possess or be able to obtain a DOE Q-level security clearance Ability to work in a diverse work environment. Satisfactory results of a pre-employment screening, which includes a background check and drug screening in accordance with Federal requirements (details below), Ability to fulfill and promote L&A core values. DESIRED QUALIFICATIONS Expertise with gravimetric analysis and tensile testing Ability to conduct calibration of laboratory equipment or interface with third party calibration service technicians Ability to conduct troubleshooting and minor repair of laboratory instruments Knowledge of internal quality auditing Experience in a regulated production environment (nuclear / aerospace / medical devices) Experience in a certified materials testing lab. Experience with composites testing. LOCATION Work will be performed at the Centrus facility in Oak Ridge, TN. PHYSICAL REQUIREMENTS AND WORKING CONDITIONS Successful candidates will be able to perform the essential functions of the job with reasonable accommodation. This job posting reflects management's assignment of essential functions and the descriptions listed do not restrict management's right to assign or reassign duties and responsibilities to this job at any time. PRE-EMPLOYMENT SCREENING Please note that marijuana remains a Schedule I controlled substance under Federal Law. Federal contractors must follow Federal drug-free workplace rules, which prohibit marijuana use, even if medical or recreational use is permitted under State Law. SALARY AND BENEFITS As an L&A employee, you will be eligible for a competitive salary as well as a comprehensive benefits package including healthcare (medical and dental), 401K plan, and paid time off. We believe in investing in our employees beyond compensation and as an L&A employee, you will have access to in-house training, career pathing, mentoring, award programs, tuition reimbursement and much more. L&A is an Equal Opportunity Employer and all qualified applicants will receive consideration for employment regardless of their race, color, religion, sex, sexual orientation, gender identity, national origin, age, or status as a qualified individual with a disability or protected veteran.
$28k-39k yearly est. 21d ago
Quality Technician
JB Pointdexter & Co
Quality assurance technician job in Loudon, TN
Responsible for maintaining quality-assurance processes, testing products, recording and analyzing results data during product development and manufacturing. Essential Functions and Activities: Conducts testing procedures during manufacturing processes to ensure that products comply with quality standards. Inspects components before assembly, analyzes trial products during development, or tests finished goods. Performs failure mode analysis of materials and processes. Collects data to solve production issues and recommend improvements. Assesses customer complaints and investigates claims. Performs inspection audits on materials and processes to ensure proper specifications are tolerances are being upheld. Ensures that regulatory compliance is in place where required. Maintains and calibrates gauges and testers. May prepare inspection plans, train new technicians, and evaluate quality costs. Supports and participates in Morgan Olson's PPS team efforts. Adheres to Quality policy by exceeding customer expectations, being customer-focused and supporting continuous improvement activities. Adheres to Safety policies and practices behavioral based safety 100% of the time. All other duties as assigned. Physical Requirements/Hazards: Job requires extensive standing, stooping, or bending, lifting, reaching, twisting and turning to assemble parts. Lifting will involve fabricated parts and assemblies weighing anywhere from several pounds to 50 pounds. Parts weighing more than 50 pounds are handled with a hoist or with help from another team member. PPE: Safety shoes, Safety glasses with side shields are always required. Other PPE such as hearing protection, gloves, safety goggles, respirators, etc. may be required depending upon the task at hand. Qualifications: High school diploma with 3-5 years' quality assurance experience in a manufacturing environment An understanding of blueprints and statistical information Good communication and listening skills Must understand pass/fail tests Good analytical skills Attention to detail and an aptitude for working with data a plus Basic engineering concepts are helpful Benefits: Medical, Dental, Vision, 401(k) Company paid life insurance 10 company paid holidays Vacation and personal time Equal Opportunity Employer
$24k-33k yearly est. 17d ago
Quality Control Technician- Knoxville, TN
The Rogers Company 4.8
Quality assurance technician job in Oak Ridge, TN
Rogers Group, Inc., headquartered in Nashville, is a privately held aggregates and asphalt highway construction company operating in 12 states with over 3,000 employees. RGI, established in 1908, has the distinction of being recognized as the largest privately held aggregate producer in the United States. We have 86 quarries and 56 asphalt plants across Tennessee, Mississippi, Georgia, Alabama, South Carolina, North Carolina, Kentucky, Arkansas, Texas, Indiana, Illinois, and Ohio. Rogers Group, Inc. is currently seeking an individual for the QUALITY CONTROL TECHNICIAN based in Knoxville, TN. This candidate will be supporting our East TN operations and should have experience in asphalt quality control. Pay depends on verifiable experience! The successful candidate will possess excellent interpersonal and written communication skills and will be responsible for a wide variety of quality control efforts including but not limited to testing materials produced to assure compliance with internal and external specifications, providing technical services and support to internal and external customer, supporting efforts to guarantee compliance with environmental agencies, understanding of chemical analysis, attention to detail, and maintaining control charts and other required records. The potential candidates for the role must be enthusiastic and have an uncompromising emphasis on safety. Responsibilities Test selection of materials produced to ascertain production of quality materials in an effective and cost-efficient manner. Monitor production and certify test results for use in contract procurement or completion of job quality requirements. Maintain control charts and other records required. Computer and data entry skills required. Skilled in operating quality control lab equipment and testing materials. Demonstrable knowledge of aggregate testing procedures including gradations, XRF/chemistry testing, crushed count, deleterious count, basic geological knowledge. Ability to problem solve and demonstrate critical thinking. Ability to lift 50 pounds continuously throughout the day. Basic mechanical/repair skills. Basic math and computing/technology skills. Flexible schedule (possible night and Saturday shifts). Excellent verbal communication and interpersonal skills; be able to work on a team. Self-motivated and able to work without constant supervision. Operate testing equipment and company vehicles in a responsible and safe manner. Perform daily housekeeping operations and maintain a clean lab environment Must pass pre-employment drug screening. Rogers Group provides extensive benefits, strong compensation, and a safe, drug-free working environment. As a Rogers Group employee, you will have access to our competitive company perks, including: Medical, Dental, Vision Insurance plus Health Savings Account with annual company contribution. Company provided Group Life and Accidental Death & Dismemberment insurance. Retirement 401(k) with company contribution and match at one year of service. Company provided Short- and Long-Term Disability. Paid Holiday's including Christmas shutdown between Christmas and New Years Day. Paid vacation available after 180-day probationary period and accrued based on years of service. Annual performance-based merit increases. Career growth/advancement opportunities. RGI EEO Statement It is the policy of Rogers Group, Inc. to recruit, hire, and promote individuals based on demonstrated merit and qualifications. We are committed to providing a work environment that is free from discrimination, harassment, and retaliation as protected by applicable federal, state, or local laws. All applications are accepted online at ***********************
$27k-35k yearly est. Auto-Apply 21d ago
Quality Technician
Orbia Advance Corporation 4.3
Quality assurance technician job in Clinton, TN
Join Dura-Line, an Orbia business, in leading the charge for global connectivity! As the premier manufacturer of plastic conduit pipes, we create pathways that connect people and information worldwide in various markets. Every part of the manufacturing process is monitored with environmentally friendly sustainable efforts in mind. Quality, sustainability, and safety are paramount values at Dura-Line. Be part of our mission to Advance Life Around the World. Job Title: Dura-Line Quality Technician Location: Clinton, TN Join Our Quality Team at Dura-Line! Are you a natural detective with a passion for finding answers? Do you bring experience to the Quality arena and boast a proven attendance record? Can you thrive in a 3:00pm-11:15pm Monday-Friday position? Then this may be a great fit for you! At Dura-Line, we create what connects us! We're seeking a dedicated Quality Assurance Technician to perform inspections and testing, ensuring compliance with industry standards. Collaborate with our production team to drive continuous improvements and uphold the highest safety and quality standards for our products. Position Details: * Schedule: Monday-Friday, 2nd Shift (3:00pm-11:15pm) *Candidate must be able to work 1st Shift hours for a minimum of 3 weeks for training. * Starting Pay: $18.00-$19.25/hour, depending on experience plus $1.50 shift differential * Sign-on Bonus: $500 after 90 days and $1000 after 180 days totaling $1,500.00 * Referral Bonus: $500 after 90 days and $1000 after 180 days totaling $1,500.00 for a candidate that is hired * Work Environment: Manufacturing, Non-Climate Controlled, Variable Temperatures, Team Oriented, On-The-Job Training Application Instructions: To apply, please submit your resume through our online application portal by clicking the 'Apply Now' button. Ensure your contact information is up to date. Applicants must submit a resume to be considered for the position. Responsibilities: * Conduct daily line audits to proactively correct defects and identify root cause corrective actions. * Inspect and test manufactured goods to ensure safety and meet/exceed acceptable tolerances. * Demonstrate a keen eye for detail, focusing on maintaining product integrity. * Actively contribute to a fast-paced, high-speed environment, following standardized work and safe practices in a continuous improvement setting. * Communicate effectively with team members and support teams to ensure continuous production of high-quality products. * Exhibit a team-oriented, goal-driven, and motivated approach. Education and Experience Requirements: * Minimum 1 year of experience in Quality Assurance or Quality Control role within a manufacturing environment * Must have working knowledge and skills using MS Office-Word and Excel * Experience utilizing standard tools and product quality measuring devices is required * Experience using quality lab equipment is a plus * Ability to read, write and understand the English language * Experience with using material specification and requirement check sheets * Must have basic mathematical competencies * Experience with SAP or ERP data management systems preferred * Knowledge of root cause and corrective action processes and procedures is a plus Key Skills for Success: * Manufacturing Experience * Teamwork * Reliability * Attention to Detail * Effective Communication * Organization * Self-Motivated * Customer Orientation * Basic Computer Knowledge Occupational and Physical Requirements: * Recognize color spectrum and ability to distinguish between colors * Must be able to move about manufacturing floor, bend, stoop, twist in performance of job duties * Must be able to lift, push and/or pull up to 50 lbs. * Experience working in a team with demonstrated effective communication skills is required * Flexibility to work overtime if needed Benefits: * Medical, Vision, Dental starting on your first day! * 401k with 100 % Match up to 6 % * Employer Paid Short-Term & Long-Term Disability * Employer Paid Life Insurance * Paid Parental Leave * 11 Paid Holidays * Paid Vacation accrual up to 120 hours annually * Paid Sick Time up to 56 hours annually * Safety Footwear Subsidy Program ($200/annually) * Prescription Safety Glasses Subsidy Program ($200/every 2 years- Prescription required) * Quarterly Bonus based on Performance What We Offer: * Competitive pay with shift differentials. * On-the-job training and development opportunities. * A dynamic and supportive team environment. * Opportunities for career growth and advancement. * Comprehensive benefits package. If you're hands-on, customer-centric, and results-oriented, join us in facilitating quality assurance, document control, and safety functions at our plant! The compensation for this position will typically range from $18/hr. The actual base pay offered to the successful candidate will be based on multiple factors, including but not limited to job-related knowledge/skills, experience, geographical location, and internal equity.The compensation package may also include short and long-term incentive compensation. We offer a comprehensive benefits package that includes healthcare coverage, a 401(k) retirement savings plan, paid company holidays, paid vacation time, paid sick time, parental leave, short- and long-term disability leave, and an employee assistance program. At Orbia, we are committed to taking care of our employees and believe in providing comprehensive support so you can thrive at work and home. All employees are subject to pre-employment Background Check and Drug Screening and employment is contingent upon successful clearance of both. Dura-Line is an Equal Opportunity Employer and participates in the federal E-Verify program to verify the work eligibility of all new hires. Dura-Line will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. 41 CFR 60-1.35(c) Clinton, TN, US, 37716 Time Zone: Eastern Standard Time Business Unit: BU Duraline USA (BU_DUR_07) Functional Area: FA Operations (FA_OPS_01)
$18-19.3 hourly 13d ago
QC Technician 2nd shift ( Monday thru Friday 3:00 pm to 11:30 pm)
Techmer Career
Quality assurance technician job in Clinton, TN
We are Techmer PM - the world's foremost materials design firm, creating custom polymers that make up essential products. Through our long-standing partnerships with processors, original equipment manufacturers, and product designers, we've worked for decades to tackle manufacturing and business challenges through sustainable, future-minded solutions. We are currently seeking a QC Technician for our Clinton, Tennessee facility. This position will be on 2nd shift which is 3:00PM-11:30PM, Monday-Friday. Starting rate for this position $18.50 and up, depending on experience. Benefits include: Eligible for medical benefits on your first day! High deductible health plan offering that includes up to $1,000 towards your Health Savings Account (HSA) per year. Free Teledoc membership included when you enroll in medical benefits. Employee Assistance Program which includes 5 free counseling sessions per year and access to free legal guidance 401(k) with 6% company match. You are 100% vested from Day 1 of contribution Free investment consultative services for your 401(k) plan. Company paid disability and life insurance 10 vacation days per year (pro-rated your first year) 10 company-paid holidays 2 weeks of parental leave Tuition reimbursement with up to a $20,000 lifetime maximum Annual salary reviews and bonus opportunities Hourly employees are paid weekly The ideal candidate will ensure all products/materials meet quality requirements through quality control testing, and sample compounding; ensure formulas are maintained; and that all company resources are utilized efficiently. Responsibilities include: · Safety Implementation · Quality Assurance · Formula Management · Lean/5S Participation · Laboratory operations · Other duties may be assigned Qualifications/Requirements/Skills: · High school diploma or GED · One year of manufacturing experience is preferred. · Ability to learn the functionality of plant equipment. · Must pass a Hue/Chroma Munsell Test and a math test. · Ability to have thorough knowledge of lab equipment and procedures, raw materials, and finished products. · Ability to multi-task and work in a fast-paced environment. · Strong communication skills.
$18.5 hourly 5d ago
Quality Technician
Thermon 4.5
Quality assurance technician job in Morristown, TN
Who are we? Located in Morristown, TN 45 minutes northeast of Knoxville, Precision Boilers manufactures industry-leading electric and fuel-fired hot water boilers and steam generators plus a wide range of accessories such as deaerators and blowdown tanks. What is the opportunity? Reporting to the Manager, Quality Assurance, the Quality Technician is responsible for conducting routine inspection of product fabrication throughout the process. Verifying code compliance and overseeing the quality of production at Precision Boilers, from the initial receiving of material to hydrostatic testing and final inspection prior shipping. Essential Duties and Responsibilities include the following, other duties may be assigned. Responsible for conducting Incoming Inspection of critical components and materials and perform verification of ASME Code material as applicable. Performs inspection of incoming goods. documents and reports on inspection results. Notifies warehouse personnel of conforming/ acceptable product for release to inventory. For product OOS issues correspond SCAR and notify Quality Engineer. Conduct routine inspection and applicable testing at each individual stage of the fabrication process as indicated on the traveler. This includes but is not limited to: Welding, Cabinet & Sheet metal, Electrical, Plumbing, Paint, warehouse (incoming inspection), Shipping (final inspection), etc. Conduct regular VT inspections at each individual stage of the welding fabrication following inspection protocols. Assist with ASME code driven examination (VT, MT, PT, RT) and related activities if/when/as needed. Assist with creation of ASME nameplates and verify data contents are complete and correct. The same applies for all product labeling and stickers Report nonconformances identified during routine inspection, assist with data collection and reporting via the quality gate boards and/or e-Database (ProcessMAP). Assist in conducting internal and external inspection of all vessels prior to hydrostatic testing Assist with collecting and reviewing all paperwork required for hydrostatic testing as needed May be required to provide support with QMS documentation development and/or improvement. May be required to participate in internal and/or external audits (ASME, QMS, suppliers, customer FATs). Participates in engineering drawing feedback loop process for drawing and BOM changes as necessary to support production May be assigned to participate in programs, projects, or initiatives as they apply to correction, prevention and/or improvement of product or process quality (e.g. Kaizen, VSM, etc.) Maintains work area in a clean and safe manner. Observe all safety precautions, rules, and regulations. Comply with and helps enforce standard policies and procedures The above are considered essential duties and are illustrative of those job tasks, which are fundamental. Employees may be required to perform additional related duties as may be assigned by management. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Qualifications: The role requires completing an eye examination, Ishihara color test and visual examination (VT) qualification test. Candidate will be subject to such examinations upon hiring. The candidate must be able to obtain the following certifications within six months of the start of their employment: Magnetic Particle Testing (MT) Liquid Dye Penetrate Testing (PT) Visual Testing (VT) Education and Experience: The candidate must have a minimum of a high school diploma or degree of equivalence (i.e. G.E.D.) and/or 1-3 years of Welding background and/or basic knowledge of application of ASME Code Skills and Abilities: The following skills and abilities are not required (except the first), but preference shall be given to candidates that meet the preferred standards. Must be apt at technical problem solving (required) 3+ years of hands-on/applied working knowledge in ASME section IX requirements for Pressure Vessels. Strong math skills General knowledge for reading, interpreting GD&T and reviewing engineering drawings The above are considered essential duties and are illustrative of those job tasks, which are fundamental. Employees may be required to perform additional related duties as may be assigned by management. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Physical Demands: This position requires moderate lifting and walking. Annual eye exams are also required and are covered by PRECISION BOILERS. Regularly required to stand, walk, sit, reach, lift, stoop, kneel, crouch, crawl, talk or hear, and be able to tolerate repetitive motion during the full course of a scheduled shift. Must be able to lift and/or move more than fifty (50) pounds. Able to physically multitask. Work Environment: The Quality Technician will spend the majority of his or her time in the plant with some office exposure. Earplugs, safety glasses and steel toe safety shoes are mandatory in the plant and are provided by Precision Boilers. Benefits: Bonus eligibility. Medical, Dental, and Vision. Short-Term Disability, Long-Term Disability, and Life Insurance. 401k with Company Match. Paid Time Off. Equal Opportunity Statement: Vapor Power International, LLC and VPI Precision Boilers, LLC provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Candidates applying for this job opening must be legally authorized to work in the United States and are required to have US residency at the time of application. OPT or H1B Visa Sponsorship is not available for this opportunity currently.
$24k-30k yearly est. 60d+ ago
Quality Technician
Tjoapack
Quality assurance technician job in Clinton, TN
Job DescriptionQuality Technician ???? Clinton, TN | 7:00am-3:30pm, 3:00pm-11:30pm, 11:00pm-7:30am | Full-time ???? Vacancies: 1 on 1st Shift, 2 on Second Shift, 1 on Third Shift Tjoapack is a global contract packaging organization (CPO) specializing in primary and secondary pharmaceutical packaging and supply chain management. With more than 30 years of experience, we process millions of medicine packages every year for customers in over 45 countries worldwide. Operating in Clinton, TN since 2021, Tjoapack is focused on delivering safe, compliant, and reliable packaging solutions-always with the patient at the center of our supply chain. The Role As a Quality Technician, you are a production-facing member of the Quality team, providing hands-on, real-time quality support on the warehouse floor. Your primary responsibility is to help ensure packaging activities are executed according to approved work instructions, documentation requirements, and GMP standards. This role supports-but does not own-quality systems. You will assist with inspections, documentation execution, deviation support, and equipment challenges while working closely with Production, Packaging Operators, and Line Leaders to keep operations running smoothly and compliantly. A Day in the Life ???? As a Quality Technician at Tjoapack, your day is closely tied to production activity. You'll spend much of your shift on the floor-supporting packaging teams by answering process questions, verifying correct execution of work instructions, and assisting with documentation completion as production progresses. You may perform in-process checks, support equipment challenges, or help identify and document issues when something doesn't go as expected. When deviations or documentation questions arise, you provide immediate support, escalate as needed, and help ensure actions are recorded accurately. Your presence helps production teams stay aligned with expectations while keeping work moving efficiently and correctly. What You'll Do ???? Production Quality Support Provide real-time quality support during packaging operations. Assist operators and line leaders with correct execution of work instructions. Support equipment challenges and in-process checks per approved procedures. Act as a quality presence on the floor to reinforce expectations. ???? Documentation & Records Support Assist with completion and review of production documentation for accuracy and completeness. Support Document Control and Annual Reporting execution activities (data gathering, document routing, corrections). Help resolve documentation errors identified during production. ⚠️ Deviation & Non-Conformance Support Identify potential non-conformances during production activities. Support investigations by gathering information, documentation, and observations. Assist with follow-up actions as directed by Quality leadership. ???? Inspections & Checks Perform routine product and process inspections according to established procedures. Verify materials, components, and processes are used as instructed. Document inspection results accurately and promptly. ???? Communication & Team Collaboration Work closely with Packaging Operators, Line Leaders, and Production Supervisors. Communicate observations, risks, and issues clearly to Quality leadership. Participate in team meetings and shift handovers as required. What We're Looking For Minimum 3 years of experience in a pharmaceutical or regulated manufacturing environment. Hands-on experience supporting production or shop-floor quality activities. Working knowledge of cGMP / cGDP requirements. Strong attention to detail and ability to follow written procedures precisely. Clear verbal and written communication skills. Comfortable working in fast-paced, production-driven environments. Strong teamwork and problem-recognition skills. Why Join Us? Be a hands-on quality presence directly supporting production success. Work in a collaborative environment where quality and operations partner closely. Gain experience across packaging, documentation, and shop-floor quality support. Competitive compensation and benefits. Opportunities for growth within Quality or Operations pathways. Pre-Employment Requirements ⚕️ All employment at Tjoapack is contingent upon successful completion of: Background check Drug screening Physical examination Apply Now If you enjoy working on the production floor, supporting teams in real time, and ensuring work is executed correctly, we'd love to hear from you. ???? Apply today to join Tjoapack as a Quality Technician and help support safe, compliant pharmaceutical packaging operations.
$24k-33k yearly est. 12d ago
Production Technician
Keurig Dr Pepper 4.5
Quality assurance technician job in Knoxville, TN
Job Overview:*Sign On Bonus Eligible - $3,000* Production Technician The Production Technician I is responsible for operating and monitoring production machinery to maximize production and maintain KDP's high standards in safety and quality. This role will also be engaged in supporting improvements to the manufacturing process in the areas of safety, quality, delivery, productivity and growth. Shift and Schedule: This is a full time opportunity working our N2 schedule. Flexibility to work overtime as needed. Our site does run 24/7. N2 Friday - Sunday from 5:00pm-5:30am. Position Responsibilities: Maintain a safe and healthy environment, demonstrating safe behaviors at all times. Understand and help drive improvement to quality systems and policies (Quality Data System, Safe Quality Food, Good Manufacturing Practices and Hazard Analysis Critical Control Points). Learn to safely operate and monitor high-speed production equipment. Actively engage in resolving production line issues, executing and developing standard work, tracking production data, and participating in KDP's lean daily management process. Actively learn and participate in formal problem-solving processes with team members. Generate productivity and continuous improvement ideas. Demonstrate KDP values of Team First, Deliver Big, Think Bold, Being Fearless and Fair. Sign-on bonus (less taxes): You will receive a sign-on bonus in the gross amount of $3,000. 00 (the "Sign-on Bonus"), to be paid in three separate payments. The first payment will be in the amount of $1,000. 00 (less applicable taxes) at 3 months 6 months and 9 months. Please note that if you resign for any reason within one year of the last payment date, you will be required to reimburse the Company the full amount of your Sign-on Bonus. Total Rewards:Pay starting at $19. 43 per hour. The employee will move to a higher rate of $20. 46 per hour in the quarter after their 6-month anniversary. Night shift eligible for a Shift Differential of $3. 00 Where Applicable:• Benefits eligible day one!! • Benefits, subject to eligibility, and collective bargaining agreements (where applicable): Medical, Dental, Vision, Disability, Paid Time Off (including vacation and sick time), 401k with company match, Tuition Reimbursement, and Mileage Reimbursement Requirements:Qualifications: 1 year prior experience with operation of high-speed production manufacturing preferred1 year prior experience monitoring of product quality preferred Ability to quickly learn about how processing and packaging equipment works. Mechanical understanding or manufacturing experience preferred. Self-motivated team player with ability to make decisions, communicate and problem solve. Comfort with basic computer functions and ability to quickly learn production software. Basic mathematical skills to make production calculations Physical Requirements/Working Conditions: Ability to lift up to 35 pounds and 50 pounds occasionally. Ability to bend, stretch and stand during entire shift. Ability to frequently kneel, squat, climb stairs/ladders, bend, stoop, twist, and reach overhead with repetitive motions. Ability to work in a variety of temperature and humidity conditions. Company Overview: Keurig Dr Pepper (NASDAQ: KDP) is a leading beverage company in North America, with a portfolio of more than 125 owned, licensed and partner brands and powerful distribution capabilities to provide a beverage for every need, anytime, anywhere. We operate with a differentiated business model and world-class brand portfolio, powered by a talented and engaged team that is anchored in our values. We work with big, exciting beverage brands and the #1 single-serve coffee brewing system in North America at KDP, and we have fun doing it!Together, we have built a leading beverage company in North America offering hot and cold beverages together at scale. Whatever your area of expertise, at KDP you can be a part of a team that's proud of its brands, partnerships, innovation, and growth. Will you join us?We strive to be an employer of choice, providing a culture and opportunities that empower our team of ~29,000 employees to grow and develop. We offer robust benefits to support your health and wellness as well as your personal and financial well-being. We also provide employee programs designed to enhance your professional growth and development, while ensuring you feel valued, inspired and appreciated at work. Keurig Dr Pepper is an equal opportunity employer and recruits qualified applicants and advances in employment its employees without regard to race, color, religion, gender, sexual orientation, gender identity, gender expression, age, disability or association with a person with a disability, medical condition, genetic information, ethnic or national origin, marital status, veteran status, or any other status protected by law. A. I. Disclosure: KDP uses artificial intelligence to assist with initial resume screening and candidate matching. This technology helps us efficiently identify candidates whose qualifications align with our open roles. If you prefer not to have your application processed using artificial intelligence, you may opt out by emailing your resume and qualifications directly to kdpjobs@kdrp. com in lieu of clicking Apply. Please include the job title and location or Job ID # in the email subject line.
$19 hourly Auto-Apply 5d ago
Quality Technician
Kelvion Products
Quality assurance technician job in Knoxville, TN
Kelvion, one of the leading global manufacturers of heat exchangers is seeking to hire a detail-oriented Quality Technician to work with our Quality Team at our Paducah, Kentucky location. The primary responsibility of the Quality Technician will be to perform incoming inspections to prevent non-conforming parts or materials from being used in the manufacturing process. In addition, this individual will assist in maintaining the Quality Management System (QMS) for Kelvion. This will include process auditing, product quality objectives and other activities related to the manufacturing process. OVERALL OBJECTIVES OF ROLE To improve the overall quality of products being manufactured and ensuring conformance to engineering and quality standards are met by performing receiving inspections on incoming parts and materials. PRIMARY CUSTOMER FOCUS To ensure Kelvion's Standard of Excellence, which includes quality, safety and functionality, is evident in the work completed by the Quality Department, guaranteeing customer satisfaction. RESPONSIBILITIES & DUTIES Perform local deliveries to customer and pick-ups from local vendors Initiate and maintains tool program Assist in determining the room cause for quality problems Assist in issuing corrective actions for non-conforming material Audit internal processes for conformance Perform inspections on manufactured products, works in process and finishing goods, to ensure procedures are being followed and the products meet the specified standards. Initiate “Quality Alerts” when non-conformances are identified Be able to perform continue improvement activities, such as Lean Manufacturing, 6S Kaizen events, workplace organization, etc. Ensure inspection records and reports are kept in a timely manner Build and retain local customer relationships for quality needs. RESPONSIBILITIES - Safety To help ensure that all our employees go home safely at the end of their working day. RESPONSIBILITIES - Quality To ensure Kelvion's Standard of Excellence, which includes quality, is incorporated into every product we produce. Will adhere to all quality requirements that are inside of the Quality Management system. RESPONSIBILITIES - Corporate / Site Follow all company policies and procedures, including but not limited to Global Code of Business Principles, Code of Ethics and Business Conduct, Operational Framework To be part of & to promote Knoxville Standard of Excellence which incorporates high standard of ethical behavior, to promote a culture of honesty and integrity, and one team culture. All employees are expected to follow government and corporate laws, rules, regulations, policies, and procedures. REQUIREMENTS (KNOWLEDGE, SKILLS & ABILITIES) Must exhibit good interpersonal skills and be a “Team” player. Be able to deal with change and respond quickly to a fast-paced environment. Perform duties in an assertive, hands-on manner, with good attention to detail. Must possess good time management skills. Must possess good analytical problem-solving skills. Shall possess a basic understanding of statistical concepts. The ideal candidate is a fast learner with the ability to work with minimal supervision and cooperate in a team environment. Be able to read prints and product drawings. Be able to perform inspections using common measuring equipment and devices, such as gauges, micrometers, and other measure equipment. Microsoft Word, Excel, and PowerPoint as well as have excellent math skills and ability to process numbers quickly to produce charts EDUCATION AND EXPERIENCE (required levels) Minimum of a High School Diploma Possess a working knowledge of the Association of American Railroads (AAR) M-1003 standards Must have three to five (3-5) years of experience in a manufacturing environment. PHYSICAL REQUIREMENTS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently required to stand; use hands to finger, handle, or feel; and reach with hands, arms, and shoulders. The employee is occasionally required to walk; sit; climb or balance; stoop, kneel, crouch, or crawl; and talk and hear. The employee must regularly hand lift and/or move objects up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus.
$24k-33k yearly est. Auto-Apply 60d+ ago
Quality Assurance Technician
Merritt Precision 4.6
Quality assurance technician job in Sweetwater, TN
Since 2004, Merritt Precision has specialized in large-format CNC machining solutions for a wide range of sophisticated composite parts. Experience combined with a focus on relationships has helped Merritt Precision bring our customers' most ambitious ideas to reality and success in the marketplace. With locations in Merritt Island, FL, and Sweetwater, TN, Merritt Precision provides 3D design, scanning, milling, and tooling services to customers with diverse composite needs. The Quality Assurance Technician ensures all parts produced by Merritt Precision meet or exceed customer specifications and company quality standards. This role plays a key part in maintaining the integrity of our products through inspection, documentation, and continuous improvement. The ideal candidate will have a strong attention to detail, hands-on experience with composite manufacturing, and a proactive approach to identifying and resolving quality issues. Requirements Key Responsibilities Conduct in-process and final inspections on composite tooling and fabricated components using precision measuring tools and visual standards. Verify that all parts meet dimensional, functional, and aesthetic requirements based on customer drawings and specifications. Maintain accurate, detailed, and organized inspection records and quality documentation. Collaborate closely with production teams to identify, document, and resolve nonconformances in real time. Assist in the calibration and maintenance of inspection and measurement equipment. Evaluate incoming chemicals and materials to ensure they meet production and quality standards. Develop and maintain Standard Operating Procedures (SOPs) that support consistent, high-quality outcomes. Participate in root cause analysis and corrective/preventive action (CAPA) processes. Support internal process audits and quality improvement initiatives. Uphold compliance with company standards, customer requirements, and applicable industry regulations. Qualifications Required High school diploma or equivalent. Strong attention to detail and commitment to precision. Hands-on experience using calipers, micrometers, height gauges, Barcol impressor, and other measuring tools. Familiarity with composites manufacturing processes, including lamination and gelcoat finishing. Proficiency in Microsoft Office and/or inspection reporting software. Basic ability to read and interpret blueprints, drawings, and technical specifications. Excellent written and verbal communication skills, with clear documentation practices. Preferred Experience with ISO 9001 or AS9100 quality systems. Knowledge of CMM inspection, 3D scanning equipment, or related metrology tools. Prior experience in aerospace, marine, or advanced manufacturing environments. Why Join Merritt Precision? At Merritt Precision, we take pride in craftsmanship, innovation, and collaboration. You'll be part of a skilled, supportive team that values integrity, quality, and long-term relationships-both with our employees and our customers.
$25k-34k yearly est. 60d+ ago
Quality Control Lab Technician
Longenecker & Associates
Quality assurance technician job in Oak Ridge, TN
Longenecker & Associates (L&A) seeks a motivated Quality Control Lab Technician to contribute to our mission supporting our work at Centrus Energy in Oak Ridge, TN. L&A is a woman-owned small business and trusted partner enabling critical missions across the U.S. Department of Energy (DOE) complex for more than 30 years. We contribute to DOE's nuclear security and environmental remediation enterprise by providing the highest-caliber staff and experts. L&A is unconditionally committed to mission success and the well-being of employees, the nation and the environment. Our team members are passionate about building a healthier environment for generations to come. We are a community that interfaces and effectively communicates with all levels of management and government. If you have a passion for excellence, seek opportunities to engage in mission critical work, and consistently exceed expectations, apply now to join our professional family. POSITION DESCRIPTION This position is responsible for maintaining quality control processes, testing products, and recording and analyzing results gathered to ensure products meet quality specifications. This position will support quality by performing tests of components according to safety standards, standard operating procedures, and other related standards. Major Duties and Responsibilities: Perform accurate analysis following appropriate standard test methods and report data in a timely manner Operate various analytical instrumentation for chemical and physical testing such as analytical balances, ovens, wet chemistry, and tensile testing Keep all laboratory instrumentation and equipment calibrated and in working order Document inspection results in logbooks, worksheets, and information systems Verify inspection data to determine conformance and compliance to specifications Interface/communicate with engineers and/or managers to describe inspection results Document, track, and complete nonconformance reports Detect erroneous inspection data and troubleshoot instrumentation to correct Conduct Measurement System Analysis Maintain clean and organized laboratory work environment Practice safe working behaviors and adhere to safety policies, guidelines, and procedures Train new personnel on QC test methods, procedures, and work instructions Maintain an inventory of laboratory supplies and place orders when supplies are required Other projects as assigned EDUCATION REQUIREMENTS Bachelor's degree in a science field (Chemistry, Biology, Physics); OR an Associate's degree in chemical technology, or equivalent, with 1+ years of experience as a quality control laboratory technician; OR a High School diploma with 3+ years of experience as quality control laboratory technician MINIMUM QUALIFICATIONS Knowledge of basic laboratory equipment, analytical testing methods and results reporting Knowledge of basic calibration techniques and ability to perform calibration of instruments as required Strong mathematical skills including ability to calculate results such as averages, percentages, and metric conversions Understand basic statistical techniques sufficient for evaluation of measurement data trends Experience working in a laboratory, operating scientific equipment, and safely handling chemicals Ability to write procedures and reports Strong work ethic, professionalism, attention to detail, and ability to follow written procedures such as SOPs Ability to work independently and within team environments Must possess or be able to obtain a DOE Q-level security clearance Ability to work in a diverse work environment. Satisfactory results of a pre-employment screening, which includes a background check and drug screening in accordance with Federal requirements (details below), Ability to fulfill and promote L&A core values. DESIRED QUALIFICATIONS Expertise with gravimetric analysis and tensile testing Ability to conduct calibration of laboratory equipment or interface with third party calibration service technicians Ability to conduct troubleshooting and minor repair of laboratory instruments Knowledge of internal quality auditing Experience in a regulated production environment (nuclear / aerospace / medical devices) Experience in a certified materials testing lab. Experience with composites testing. LOCATION Work will be performed at the Centrus facility in Oak Ridge, TN. PHYSICAL REQUIREMENTS AND WORKING CONDITIONS Successful candidates will be able to perform the essential functions of the job with reasonable accommodation. This job posting reflects management's assignment of essential functions and the descriptions listed do not restrict management's right to assign or reassign duties and responsibilities to this job at any time. PRE-EMPLOYMENT SCREENING Please note that marijuana remains a Schedule I controlled substance under Federal Law. Federal contractors must follow Federal drug-free workplace rules, which prohibit marijuana use, even if medical or recreational use is permitted under State Law. SALARY AND BENEFITS As an L&A employee, you will be eligible for a competitive salary as well as a comprehensive benefits package including healthcare (medical and dental), 401K plan, and paid time off. We believe in investing in our employees beyond compensation and as an L&A employee, you will have access to in-house training, career pathing, mentoring, award programs, tuition reimbursement and much more. L&A is an Equal Opportunity Employer and all qualified applicants will receive consideration for employment regardless of their race, color, religion, sex, sexual orientation, gender identity, national origin, age, or status as a qualified individual with a disability or protected veteran.
$28k-39k yearly est. 49d ago
Quality Technician
Thermon 4.5
Quality assurance technician job in Morristown, TN
Job Description Who are we? Located in Morristown, TN 45 minutes northeast of Knoxville, Precision Boilers manufactures industry-leading electric and fuel-fired hot water boilers and steam generators plus a wide range of accessories such as deaerators and blowdown tanks. What is the opportunity? Reporting to the Manager, Quality Assurance, the Quality Technician is responsible for conducting routine inspection of product fabrication throughout the process. Verifying code compliance and overseeing the quality of production at Precision Boilers, from the initial receiving of material to hydrostatic testing and final inspection prior shipping. Essential Duties and Responsibilities include the following, other duties may be assigned. Responsible for conducting Incoming Inspection of critical components and materials and perform verification of ASME Code material as applicable. Performs inspection of incoming goods. documents and reports on inspection results. Notifies warehouse personnel of conforming/ acceptable product for release to inventory. For product OOS issues correspond SCAR and notify Quality Engineer. Conduct routine inspection and applicable testing at each individual stage of the fabrication process as indicated on the traveler. This includes but is not limited to: Welding, Cabinet & Sheet metal, Electrical, Plumbing, Paint, warehouse (incoming inspection), Shipping (final inspection), etc. Conduct regular VT inspections at each individual stage of the welding fabrication following inspection protocols. Assist with ASME code driven examination (VT, MT, PT, RT) and related activities if/when/as needed. Assist with creation of ASME nameplates and verify data contents are complete and correct. The same applies for all product labeling and stickers Report nonconformances identified during routine inspection, assist with data collection and reporting via the quality gate boards and/or e-Database (ProcessMAP). Assist in conducting internal and external inspection of all vessels prior to hydrostatic testing Assist with collecting and reviewing all paperwork required for hydrostatic testing as needed May be required to provide support with QMS documentation development and/or improvement. May be required to participate in internal and/or external audits (ASME, QMS, suppliers, customer FATs). Participates in engineering drawing feedback loop process for drawing and BOM changes as necessary to support production May be assigned to participate in programs, projects, or initiatives as they apply to correction, prevention and/or improvement of product or process quality (e.g. Kaizen, VSM, etc.) Maintains work area in a clean and safe manner. Observe all safety precautions, rules, and regulations. Comply with and helps enforce standard policies and procedures The above are considered essential duties and are illustrative of those job tasks, which are fundamental. Employees may be required to perform additional related duties as may be assigned by management. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Qualifications: The role requires completing an eye examination, Ishihara color test and visual examination (VT) qualification test. Candidate will be subject to such examinations upon hiring. The candidate must be able to obtain the following certifications within six months of the start of their employment: Magnetic Particle Testing (MT) Liquid Dye Penetrate Testing (PT) Visual Testing (VT) Education and Experience: The candidate must have a minimum of a high school diploma or degree of equivalence (i.e. G.E.D.) and/or 1-3 years of Welding background and/or basic knowledge of application of ASME Code Skills and Abilities: The following skills and abilities are not required (except the first), but preference shall be given to candidates that meet the preferred standards. Must be apt at technical problem solving (required) 3+ years of hands-on/applied working knowledge in ASME section IX requirements for Pressure Vessels. Strong math skills General knowledge for reading, interpreting GD&T and reviewing engineering drawings The above are considered essential duties and are illustrative of those job tasks, which are fundamental. Employees may be required to perform additional related duties as may be assigned by management. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Physical Demands: This position requires moderate lifting and walking. Annual eye exams are also required and are covered by PRECISION BOILERS. Regularly required to stand, walk, sit, reach, lift, stoop, kneel, crouch, crawl, talk or hear, and be able to tolerate repetitive motion during the full course of a scheduled shift. Must be able to lift and/or move more than fifty (50) pounds. Able to physically multitask. Work Environment: The Quality Technician will spend the majority of his or her time in the plant with some office exposure. Earplugs, safety glasses and steel toe safety shoes are mandatory in the plant and are provided by Precision Boilers. Benefits: Bonus eligibility. Medical, Dental, and Vision. Short-Term Disability, Long-Term Disability, and Life Insurance. 401k with Company Match. Paid Time Off. Equal Opportunity Statement: Vapor Power International, LLC and VPI Precision Boilers, LLC provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Candidates applying for this job opening must be legally authorized to work in the United States and are required to have US residency at the time of application. OPT or H1B Visa Sponsorship is not available for this opportunity currently.
$24k-30k yearly est. 3d ago
Production Technician I
Keurig Dr Pepper 4.5
Quality assurance technician job in Knoxville, TN
Job Overview:Production Technician I The Production Technician I is responsible for monitoring Keurig Dr Pepper's production processes, including operating manufacturing equipment and maintaining compliance with Keurig Dr Pepper's high standards for safety and quality. This role will be engaged and understand initiatives to improve safety, quality, delivery, cost and culture. Shift and Schedule - Monday - Thursday D15:00 AM to 5:30 PM Position Responsibilities: Maintain a safe and healthy environment, demonstrating safe behaviors at all times. Understand and help drive improvement to quality systems and policies (Quality Data System, Safe Quality Food, Good Manufacturing Practices and Hazard Analysis Critical Control Points). Learn to safely operate and monitor high-speed production equipment. Actively engage in resolving production line issues, executing and developing standard work, tracking production data, and participating in KDP's lean daily management process. Actively learn and participate in formal problem-solving processes with team members. Generate productivity and continuous improvement ideas. Demonstrate KDP values of Team First, Deliver Big, Think Bold, Being Fearless and Fair. Total Rewards:• Pay starting at $19. 43 per hour. The employee will move to a higher rate of $20. 46 per hour in the quarter after their 6-month anniversary. Where Applicable: • Benefits eligible day one!! • Benefits, subject to eligibility, and collective bargaining agreements (where applicable): Medical, Dental, Vision, Disability, Paid Time Off (including vacation and sick time), 401k with company match, Tuition Reimbursement, and Mileage Reimbursement Requirements:Qualifications: 1 year prior experience with operation of high-speed production machinery preferred 1 year prior experience monitoring of product quality preferred Ability to quickly learn about how processing and packaging equipment works. Mechanical understanding or manufacturing experience preferred. Self-motivated team player with ability to make decisions, communicate and problem solve. Comfort with basic computer functions and ability to quickly learn production software. Basic mathematical skills to make production calculations Physical Requirements/Working Conditions: Ability to lift up to 35 pounds and 50 pounds occasionally. Ability to bend, stretch and stand during entire shift. Ability to frequently kneel, squat, climb stairs/ladders, bend, stoop, twist, and reach overhead with repetitive motions. Ability to work in a variety of temperature and humidity conditions. Company Overview: Keurig Dr Pepper (NASDAQ: KDP) is a leading beverage company in North America, with a portfolio of more than 125 owned, licensed and partner brands and powerful distribution capabilities to provide a beverage for every need, anytime, anywhere. We operate with a differentiated business model and world-class brand portfolio, powered by a talented and engaged team that is anchored in our values. We work with big, exciting beverage brands and the #1 single-serve coffee brewing system in North America at KDP, and we have fun doing it!Together, we have built a leading beverage company in North America offering hot and cold beverages together at scale. Whatever your area of expertise, at KDP you can be a part of a team that's proud of its brands, partnerships, innovation, and growth. Will you join us?We strive to be an employer of choice, providing a culture and opportunities that empower our team of ~29,000 employees to grow and develop. We offer robust benefits to support your health and wellness as well as your personal and financial well-being. We also provide employee programs designed to enhance your professional growth and development, while ensuring you feel valued, inspired and appreciated at work. Keurig Dr Pepper is an equal opportunity employer and recruits qualified applicants and advances in employment its employees without regard to race, color, religion, gender, sexual orientation, gender identity, gender expression, age, disability or association with a person with a disability, medical condition, genetic information, ethnic or national origin, marital status, veteran status, or any other status protected by law. A. I. Disclosure: KDP uses artificial intelligence to assist with initial resume screening and candidate matching. This technology helps us efficiently identify candidates whose qualifications align with our open roles. If you prefer not to have your application processed using artificial intelligence, you may opt out by emailing your resume and qualifications directly to kdpjobs@kdrp. com in lieu of clicking Apply. Please include the job title and location or Job ID # in the email subject line.
$19 hourly Auto-Apply 14d ago
Quality Control Inspector
Longenecker & Associates
Quality assurance technician job in Oak Ridge, TN
Job Description Longenecker & Associates (L&A) seeks a motivated Quality Control Inspector to contribute to our mission supporting our work at UCOR in Oak Ridge, TN. L&A is a woman-owned small business and trusted partner enabling critical missions across the U.S. Department of Energy (DOE) complex for more than 30 years. We contribute to DOE's nuclear security and environmental remediation enterprise by providing the highest-caliber staff and experts. L&A is unconditionally committed to mission success and the well-being of employees, the nation and the environment. Our team members are passionate about building a healthier environment for generations to come. We are a community that interfaces and effectively communicates with all levels of management and government. If you have a passion for excellence, seek opportunities to engage in mission critical work, and consistently exceed expectations, apply now to join our professional family. POSITION DESCRIPTION Quality Control Inspectors are certified in receipt inspection, and other disciplines as needed, to verify that structures, systems, and components conform to predetermined requirements (e.g., codes, standards, specifications, regulatory, and contractual requirements). Non-conforming conditions, including suspect/counterfeit items, identified during the inspection and testing process shall be identified, documented, and dispositioned in accordance with established processes/procedures. PRINCIPAL RESPONSIBILITIES Possesses and applies a comprehensive body of knowledge to the timely and high-quality completion of assigned tasks. Perform receipt inspections at Central Receiving Facility or at Project location by examining inbound equipment and material for required characteristics (e.g., dimensional inspection, materials of construction) specified in the inspection plans and procurement documents. Document receipt inspections using the UCOR Electronic Purchasing System (EPS) and/or on Special Receiving Inspection Reports. Report programmatic deficiencies as Conditions Adverse to Quality (CAQ), as appropriate. Travel to vendor/supplier locations to perform source release inspections prior to shipment to UCOR sites. Be familiar with the scope and limitations of each discipline for which the individual is certified. Interpret and evaluate results with respect to applicable codes, standards, drawings, and specifications. EDUCATION REQUIREMENTS At a minimum, the following combination of education and experience is required. A high school or GED diploma with three (3) years related experience in equivalent inspection or testing activities; or An associate's degree in a related discipline plus one (1) year of related experience in equivalent inspection or testing activities; or A bachelor's degree plus six (6) months of related experience in equivalent inspection or testing activities. MINIMUM QUALIFICATIONS Effective written, listening, and oral communication skills. Be able to use inspection planning tools, determine sample size for lots, and pull random samples. Knowledge to interpret design documents (e.g., specifications). Be able to select the appropriate measuring tools and techniques. Understand types of measurement, measurement terminology, and the different types of measurement scales. Be able to identify and report non-conforming conditions. Have basic calibration knowledge to recognize in-or-out of calibration conditions. Knowledge of the quality control principles. Knowledge of regulatory and contractual requirements that impact the QA program. Ability to obtain a DOE Q-Clearance, as needed. Ability to work in a diverse work environment. Satisfactory results of a pre-employment screening, which includes a background check and drug screening in accordance with Federal requirements (details below), Ability to fulfill and promote L&A core values. DESIRED QUALIFICATIONS 5 years prior experience related to receipt inspection or certification as a Level II or III Quality Control Inspector is preferred. LOCATION This full-time on-site position is located at the UCOR office in Oak Ridge, TN. UCOR is conducting major cleanup activities at the Oak Ridge National Laboratory (ORNL) and the Y-12 National Security Complex as well as remedial activities at the East Tennessee Technology Park (ETTP). Cleanup missions on the Oak Ridge Reservation (ORR) focus on protecting people and the environment from industrial and chemical hazards while enabling current and future science and national security programs. UCOR also leads critical projects (e.g., Outfall 200 Mercury Treatment Facility and the Environmental Management Disposal Facility) and manages nuclear operations facilities at the ORNL and Transuranic Waste Processing Center. As a DOE Voluntary Protection Star site-the highest safety designation for a DOE site-safety is a prerequisite for the performance of all work performed. PHYSICAL REQUIREMENTS AND WORKING CONDITIONS Successful candidates will be able to perform the essential functions of the job with reasonable accommodation. This job posting reflects management's assignment of essential functions and the descriptions listed do not restrict management's right to assign or reassign duties and responsibilities to this job at any time. PRE-EMPLOYMENT SCREENING Please note that marijuana remains a Schedule I controlled substance under Federal Law. Federal contractors must follow Federal drug-free workplace rules, which prohibit marijuana use, even if medical or recreational use is permitted under State Law. SALARY AND BENEFITS As an L&A employee, you will be eligible for a competitive salary as well as a comprehensive benefits package including healthcare (medical and dental), 401K plan, and paid time off. We believe in investing in our employees beyond compensation and as an L&A employee, you will have access to in-house training, career pathing, mentoring, award programs, tuition reimbursement and much more. L&A is an Equal Opportunity Employer and all qualified applicants will receive consideration for employment regardless of their race, color, religion, sex, sexual orientation, gender identity, national origin, age, or status as a qualified individual with a disability or protected veteran.
$23k-32k yearly est. 6d ago

Learn more about quality assurance technician jobs

How much does a quality assurance technician earn in Knoxville, TN?

The average quality assurance technician in Knoxville, TN earns between $23,000 and $52,000 annually. This compares to the national average quality assurance technician range of $26,000 to $60,000.

Average quality assurance technician salary in Knoxville, TN

$34,000

$23,00010%

$34,000Median

$52,00090%

What are the biggest employers of Quality Assurance Technicians in Knoxville, TN?

The biggest employers of Quality Assurance Technicians in Knoxville, TN are:

Bel Environmental Engineering

Job type you want

Full Time

Part Time

Internship

Temporary

Zippia Careers
Architecture and Engineering Industry
Quality Assurance Technician Jobs
Locations
Knoxville, TN
Quality Assurance Technician Knoxville, TN Jobs

Quality assurance technician jobs in Knoxville, TN - 110 jobs

Production Technician I

Construction Quality Assurance Technician

Manufacturing Technician

Quality Associate I - Nights - $21.50 - $22.64

Quality Technician