Quality assurance technician jobs in Levittown, PA - 434 jobs

Shop Floor QA Specialist QA Shop Floor - 3rd shift Must be able to work four 10 hour days Sun to Wed 9:30pmEST to 8:00AMEST or Wed to Sat: 9:30pmEST to 8:00AMEST The position is responsible for providing daily Quality Assurance support to the manufacturing site to ensure internal and regulatory cGMP and CFR requirements are met. Quality Assurance support areas include but are not limited to Batch Record Review, Product Release, Standard Operating Procedures, Investigations, CAPA, Change Control, Shop Floor Audits. The position will interact with other departments including Manufacturing, Packaging, Quality Laboratories, Quality Systems, Validation, Engineering, Maintenance and other departments as it relates to site Quality Assurance responsibilities. Responsibilities: (Define key accountabilities and/or activities.) Under limited supervision and in accordance with all applicable federal, state and local laws/regulations, the Companies' policies, procedures and guidelines, this position: • Ensure quality and compliance in all my actions by: All employees o Attend GMP training on the schedule designated for my role and as appropriate for my role. o Adhere to strict compliance with procedures applicable to my role. o Exercise the highest level of integrity in the tasks that I perform. o In a timely and prompt manner, identify, report and seek correction for deviations noted in my workplace. o Embrace a behavior of employee involvement and commitment to doing the job right the first time. People Managers o Ensure employees under your scope of responsibility are trained in required procedures for the execution of their role and maintain current with training requirements during the year. o Promote an environment of employee involvement in the workplace. o Seek prompt identification, reporting and correction of deviations in the workplace as noted by employees. 1. Quality Assurance and Compliance Focus • Provides daily ‘Shop Floor” QA support to warehouse, bulk manufacturing and packaging lines. • Provides leadership support to QA Shop Floor activities including communication of quality events to management. • Performs or supports activities related to Batch Record Review, Raw Material, Bulk, and Finished Product Releases. • Provides support to Investigations and/or Investigation Protocols, responsibilities include conducting, writing, reviewing and approvals. • Performs or supports activities related Line Audits, Line or Area Cleaning Verifications • Participates in design of quality processes and creation/modification/approval of Standard Operating Procedures (SOP's). • Provides support to Consumer Complaint investigations. • Provide QA support to various project teams, as needed. • Actively supports Site metrics, compliance improvement and training initiatives. 2. Customer and Performance Improvement Focus • Provide support to capturing of site metrics and promote improvement opportunities. • Facilitate resolution of issues to improve site metrics. 3. People & Organization Focus • Provides training and direction as needed to new employees • Teams with Department members for process feedback and continuous improvement opportunities • Represents Quality Assurance in positive manner 4. Performs other related duties as required. About US Tech Solutions: US Tech Solutions is a global staff augmentation firm providing a wide range of talent on-demand and total workforce solutions. To know more about US Tech Solutions, please visit ************************ US Tech Solutions is an Equal Opportunity Employer.All qualified applicants will receive consideration for employment without regard to race, colour, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. Recruiter Details: Name: I.Prudvi kumar Email: ******************************* Internal Id: 25- 47837

Discover Veranova: At Veranova, we believe people are our most important asset, and we are dedicated to building the most talented workforce in our industry. Our commitment to uncompromising focus on quality, compliance, safety, and excellence in delivery shapes everything we do. We are not just looking for skills; we are seeking innovative individuals who have a mindset open to learning and growth, and a desire to make a difference. Veranova is a global leader in the development and manufacturing of complex active pharmaceutical ingredients (APIs) for pharma and biotech customers. With deep technical expertise and impressive flexibility, we develop solutions and processes that support and accelerate innovation. Join us on our mission to enable current and next-generation therapeutics to improve and save the lives of patients. Role Overview: The Production Technician will manufacture of bulk API pharmaceuticals in accordance with customer and internal specifications. Core Responsibilities: Complete batch records in accordance with FDA and Current Good Manufacturing Practices (cGMP) guidelines Provide process support and troubleshooting necessary to meet all customer requirements Maintain the facility in excellent FDA/cGMP posture ▪ Responsible for safety equipment and active participation in safety program and hazard analysis. Wears appropriate PPE for task. Ensure that waste is appropriately characterized, labelled, stored and disposed in compliance with all Company, state and federal regulations. Works collaboratively with Environmental, Health & Safety, as appropriate. Assure all production/support equipment is in proper operating condition and that all production equipment is appropriately labelled with a current status tag. Works collaboratively with Maintenance, as appropriate. Ensure the security and safe handling of all controlled substances at all times. Strictly adheres to all Company and DEA regulations. Ensure a level of housekeeping appropriate for a pharmaceutical manufacturer and maintain 5S areas. Active member of Emergency Response Team. Participate in Emergency Response Training and related activities. Promote a positive work environment by maintaining a safe work area and ensuring that their team members have the knowledge, skills and appropriate tools to perform their assigned duties and a thorough understanding of their performance expectations. Provide prompt, appropriate feedback to team members, both positive and constructive, in a continuing effort to develop employees to their full potential. Demonstrate a professional and positive attitude, integrity and a strong work ethic and encourages team members to do the same. Cooperate with all root cause investigations and follow corrective actions and compliance with Company policies and procedures, and all state and federal regulations occurs within department. Operate machines and equipment that involves set up and making adjustments to regulate temperature, pressure, flow and reactions or materials safely and in accordance with batch record and work instructions. Basic batch processing and unit operations, able to run all milling operations. Thinking is within well-defined procedures with assistance readily available. Proficient in all tasks/unit operations associated with a processing area ▪ Able to complete basic mechanical work required to keep operation moving Complex batch processing and unit operations, such as hydrogenations, PFD operations etc. Resolve regular technical problems and takes action to ensure the production plan continues to move Qualifications: Required High School Diploma with 5-7 years of experience in an API Manufacturing facility or AA in Chemistry, Engineering, or other related technical field with 3-5 years of experience or BS in Chemistry, Engineering or other related technical field Solid understanding of GMP and FDA Safety Awareness Authenticity and motivation to contribute to team success Ability to independently apply scientific and/or technical knowledge in the performance of job duties Commitment to continuous learning and improvement Effective written and verbal communication Special Factors Walking, standing for long periods of time while in plant, reaching, handling, twisting, and bending spine at waist when operating equipment. Obtain and maintain certification as forklift operator Able to lift 50lbs Must be willing to work a rotating shift Hourly Rate: $26-30 per hour Our Commitment: Health & Wellness: Comprehensive health & wellness benefits. Access to mental health resources and wellness programs. Generous PTO and holiday pay policies. Financial Wellness: Veranova is committed to fair and transparent compensation practices. This includes a competitive base salary, eligibility for performance-based bonuses, and an attractive 401(k) Plan with company match. Salary ranges reflect the scope and expectations of the role, and are based on market data, internal equity, and role-specific factors. Final compensation may vary depending on experience, skills, education, and business needs. Professional Development: Opportunities for continuous learning through LinkedIn Learning, workshops, conferences, and mentorship. Tuition Assistance for Undergraduate and Graduate degree programs. Inclusive Culture: At Veranova, an inclusive culture is integral to our values. We welcome people with diverse experiences and perspectives who share our mission to improve and save lives. Even if you don't meet every qualification, we encourage you to apply. Veterans, first responders, and those transitioning from military to civilian life bring valuable skills that strengthen our team. Additional Information: Applicants for this role must be authorized to work in the United States without further employer sponsorship. Agency and Search Firm Representatives : Veranova does not accept unsolicited resumes from agencies and/or search firms for this job posting. . All your information will be kept confidential according to EEO guidelines. Veranova is an Equal Opportunity Employer. It is the policy of Veranova to provide equal employment access and opportunity to all persons regardless of age, race, color, national origin, religion, sex, sexual orientation, gender identity and/or expression, physical or mental disability, genetic information, citizenship, marital status, veteran status, or any other characteristic protected by federal, state, or local law. All applications are carefully considered, and your details will be stored on our secure Application Management System. This is used throughout Veranova for the selection of suitable candidates for our vacancies as they arise. Veranova respects your privacy and is committed to protecting your personal information. For more information about how your personal data is used please view our privacy notice .

The Associate Analytical Technician supports manufacturing operations by performing laboratory analyses, maintaining analytical systems, and ensuring data integrity. This role is ideal for individuals who are detail-oriented, safety-conscious, and eager to grow in a technical laboratory environment. Key Responsibilities: Train under senior team members to perform routine analyses until proficiency is demonstrated. Collect samples in accordance with the Sample Plan and standard operating procedures. Conduct laboratory analyses to support plant operations and product quality. Evaluate the validity of routine analytical data and take appropriate corrective actions. Monitor analytical systems and escalate issues as needed. Perform basic preventive maintenance and calibration of laboratory instruments. Implement and qualify new analytical equipment and methods. Document, communicate, and archive analytical results and data accurately. Follow Environmental Health & Safety (EH&S) and Operating Discipline Management System (ODMS) procedures. Suggest improvements to laboratory processes, tools, and workflows. Maintain lab cleanliness and inventory through regular housekeeping tasks. Escalate non-routine requests or issues to appropriate team members. Preferred Skills & Qualifications: Understanding of analytical/scientific methods and laboratory best practices. Ability to troubleshoot and adapt to non-routine lab analyses. Familiarity with data systems and statistical evaluation tools. Strong attention to detail and commitment to safety and quality. Effective communication and collaboration skills. Schedule: This Lab Tech position is on a Rotating shift schedule but you will have different hours during training. This position will follow a rotating shift schedule with AM and PM shifts switching every two weeks.

Since 1869 we've connected people through food they love. We're proud to be stewards of amazing brands that people trust. Our portfolio includes the iconic Campbell's brand, as well as Michael Angelo's, Pace, Pacific Foods, Prego, Rao's Homemade, Swanson, and V8. In our Snacks division, we have brands like Cape Cod, Goldfish, Kettle Brand, Lance, Late July, Pepperidge Farm, Snack Factory, and Snyder's of Hanover. Here, you will make a difference every day. You will be supported to build a rewarding career with opportunities to grow, innovate and inspire. Make history with us. Why Campbell's… Benefits begin on day one and include medical, dental, short and long-term disability, AD&D, and life insurance (for individual, families, and domestic partners). Employees are eligible for our matching 401(k) plan and can enroll on the first day of employment with immediate vesting. Campbell's offers unlimited sick time along with paid time off and holiday pay. If in WHQ - free access to the fitness center. Access to on-site day care (operated by Bright Horizons) and company store. Giving back to the communities where our employees work and live is very important to Campbell's. Our "Campbell's Cares" program matches employee donations and/or volunteer activity up to $1,500 annually. Campbell's has a variety of Employee Resource Groups (ERGs) to support employees. How You Will Make History Here… As a Senior Technician - QA, you will play a critical role in ensuring the highest standards of food safety and quality in our plant operations. You will manage regulatory compliance, oversee quality assurance programs, and support continuous improvement initiatives that uphold our commitment to excellence. What You Will Do… * Execute daily distribution, collection, and review of control documentation for product manufacturing and release, ensuring compliance with quality standards and product specifications. * Collaborate with production teams to monitor processes and drive efficiency and continuous improvement. * Support preparation and execution of third-party and regulatory audits by maintaining food safety and quality policies, standards, and procedures. * Plan and execute work through eMaint Application as Site Administrator. * Manage Environmental Monitoring Program (EMP) and Alchemy training program for quality and safety. * Oversee in-process quality for plant operations and Kitchen 1869, including routine sample analyses and adherence to Good Laboratory Practices. * Conduct GAP assessments, root cause analysis, and manage corrective and preventive actions (CAPA). * Support plant safety processes through audits, corrective actions, and document management. * Other duties as assigned. Who You Will Work With… You will collaborate closely with: * Plant Operations and R&D teams, including Kitchen 1869. * Quality Manager and North American Supply Chain Quality group. * USDA onsite officials and third-party auditors. What You Bring to the Table… (Must Have) * High School Diploma required * Minimum 3 years of experience with a BS degree OR 8 years in a fast-paced food manufacturing environment. * Strong verbal and written communication skills. * Proven planning, organizing, leadership, and teamwork abilities. * Knowledge of canning and thermal processing. * Background in food processing and quality assurance. * Ability to drive quality initiatives in a dynamic environment. * Problem-solving and analytical thinking skills. * Proficiency with computer systems, SharePoint, and Microsoft Office Suite. It Would Be Great If You Have… (Nice to Have) * BS in Food Science preferred. * Experience with HACCP/FSP plans and GFSI audit standards. * Familiarity with Alchemy training systems and eMaint planning tools. * Understanding of regulatory compliance and food safety programs. Compensation and Benefits: The target base salary range for this full-time, salaried position is between $54,600-$78,400 Individual base pay depends on work location and additional factors such as experience, job-related skills, and relevant education or training. Total pay may include other forms of compensation. In addition, we offer competitive health, dental, 401k and wellness benefits beginning on the first day of employment. Please ask your Talent Acquisition Partner for more information about our total rewards package. The Company is committed to providing equal opportunity for employees and qualified applicants in all aspects of the employment relationship, including consideration for employment, without regard to race, color, sex, sexual orientation, gender identity, national origin, citizenship, marital status, protected veteran status, disability, age, religion, or any other classification protected by law.

Job DescriptionShift & Hours: Quality Assurance Technician: 3rd shift 10 PM - 6:30AM Payrate: $19.40/hour Weekends are included Job Summary: Quality Assurance Technician:The Quality Assurance Technician conducts physical product inspection of raw ingredients, work in progress and finished products in support of manufacturing and Operations. Additionally, the technician provides feedback of product checks to Operations for decision-making purposes. This Position requires a general knowledge of quality assurance. This position is to ensure the best quality products. Support without hesitation General Plant Safety, Food Safety, Food Defense Initiatives and Good Manufacturing Practices with an understanding that these are absolutes and are Priority #1 Monitor finished product which includes review for completeness, label check, weight check, and visual inspection of final product and verify all product is being produced according to specification and report any concern to production supervision. Control the product quality as it is an absolute priority Monitor all processing areas for food safety conditions Confirm all metal detectors are performing properly Must have complete knowledge of GMP's and must notify Supervisor if anything is not in compliance with GMP's or Product Specification Responsible for monitoring continuous GMP compliance for all Employees, Contractors, Vendors or Visitors Monitor the mixing process area for the bread and roll lines and monitor Lot traceability of ingredients Check temperature of sensitive raw materials upon receiving. Maintain proper calibration of product testing equipment (thermometers and hand scales) May be required to place on hold any questionable product Collect retention samples and maintain product retention for consumer complaints and process control as per specifications Cross over and walk the process together with the relieving shift QA Technician at the end of the shift Check and record flour-sifting tailings one time per shift. Maintain ongoing Temperature Logs for various raw materials, freezers and finished product. Audit conditions of docks, freezers, staging areas and of trailers Work closely with production team to complete a Food Safety Incident Report if an incident occurs Assist in a Monthly Facility Audit as required and assist with document control, in the review of quality documents Perform all special requests assigned by the Quality Assurance Manager Qualification/Experience: Quality Assurance Technician: ·High School Diploma or GED Equivalent required. College and/or trade school education is preferred. Basic math skills Must be able to follow written SOP's/work instructions Previous experience in food or pharmaceutical, preferred Ability to write simple correspondence Must be able to respond to verbal and written instructions Work Environment: Quality Assurance Technician:Work requires some physical strain such as long periods of standing and walking in the production facility. Working around moving machines in production area. Protective clothing such as uniforms, gloves and slip resistant shoes may be required. Very hot conditions in certain areas during the summer seasons. Onsite Personnel is an equal opportunity employer committed to hiring a diverse workforce in an inclusive culture environment. Onsite Personnel does not discriminate based on disability, veteran status or any other basis protected under federal, state, or local laws.

Full-time Description RK Pharma Inc, a vertically integrated pharmaceutical company headquartered in NJ, is seeking an Quality Assurance Associate to work with our growing Quality Assurance Team as we scale towards commercial manufacturing in the next upcoming months.? As a company focused on the development, manufacturing and sale of high quality and affordable generic pharmaceutical products worldwide we are looking for sharp, driven, self-directed individuals to help us grow our mid-stage start-up team. This position is located in East Windsor, NJ and is required to be onsite. Requirements If this sounds interesting to you, it's probably because up to this point you have: Bachelor's degree in Pharmaceutical Sciences, Chemistry, Biology, or a related technical field. 1-3 years of experience in a pharmaceutical or GMP-regulated environment. Solid understanding of cGMP, GDP, and FDA regulations. Experience with batch record review, deviation handling, and change control processes. Familiarity with document management systems (e.g., MasterControl). Strong attention to detail and accuracy in reviewing technical and regulatory documents. Excellent written and verbal communication skills for cross-functional collaboration. Ability to work independently and manage multiple priorities in a fast-paced environment. The main expectations and responsibilities for this position are: Review batch production and packaging records for accuracy, completeness, and GMP compliance prior to product release. Perform in-process line checks and quality inspections to ensure adherence to SOPs and specifications. Support deviation and change control processes, ensuring timely investigation and documentation. Participate in internal audits, walkthroughs, and inspection readiness activities. Maintain and update controlled documents, including SOPs, MBRs, and validation protocols. Collaborate with Quality Control, Production, and Engineering to resolve quality issues and drive continuous improvement. Ensure all QA activities are properly documented in accordance with GDP and data integrity principles. Support training, risk assessments, and compliance reviews as assigned by QA management. If this sounds like something that is of interest to you, please don't hesitate to apply to start a conversation. We look forward to getting to know more about you and the skills you can bring to a company like RK Pharma Inc. Salary Description 18+

Job Title: QA AssociateJob Description We are seeking a dedicated QA Associate to join our quality assurance team. In this role, you will be responsible for managing and coordinating various quality-related tasks, ensuring compliance with industry standards, and supporting continuous improvement initiatives within our organization. Responsibilities * Coordinate and participate in the investigation of quality deviations and non-conformances, including Deviation, LIR, OOS, and CAPA management. * Assist in implementing Corrective and Preventive Actions (CAPAs) to address root causes and prevent recurrence. * Coordinate change controls by working with the change initiator and evaluating associated risks. * Prepare for and support both internal and external audits, including those conducted by regulatory agencies such as the FDA. * Track and manage quality events within the company's electronic Quality Management System, including change controls, deviations, LIR's, OOS, and product complaints. * Compile, report, and analyze quality metrics to identify trends, compliance risks, and improvement opportunities, presenting findings during biweekly or monthly quality reviews. * Prepare annual product review (APR / APQR) reports. * Participate in the management of the vendor and supplier qualification program. * Communicate with suppliers and vendors for qualification and documents required for regulatory filing. * Support continuous improvement and maintain overall site quality. * Ensure adherence to GMP and good documentation practices. * Comply with all company policies and procedures. Essential Skills * Associates Degree or Bachelors Degree in Chemistry. * 1-2 years of Quality Assurance experience. * Experience on the manufacturing floor, laboratory, wet chemistry, titration, and chromatography. Additional Skills & Qualifications * Technical knowledge in chemistry and wet chemistry. * Proficiency in computer applications and programs related to laboratory applications. * Understanding of mathematics, including statistics. * Knowledge of sample preparation techniques. * Familiarity with spectroscopic techniques and chromatographic systems. * Basic computer knowledge, including MS Excel, Word, and Outlook. Work Environment The position operates within a laboratory setting, typically with a team of around 10 people. The facility is part of a growing CMO with a focus on high performance and cutting-edge developments in a new facility. Job Type & Location This is a Contract to Hire position based out of East Windsor, NJ. Pay and Benefits The pay range for this position is $30.00 - $35.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in East Windsor,NJ. Application Deadline This position is anticipated to close on Jan 22, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options.

Job DescriptionDescription: RK Pharma Inc, a vertically integrated pharmaceutical company headquartered in NJ, is seeking an Quality Assurance Associate to work with our growing Quality Assurance Team as we scale towards commercial manufacturing in the next upcoming months.? As a company focused on the development, manufacturing and sale of high quality and affordable generic pharmaceutical products worldwide we are looking for sharp, driven, self-directed individuals to help us grow our mid-stage start-up team. This position is located in East Windsor, NJ and is required to be onsite. Requirements: If this sounds interesting to you, it's probably because up to this point you have: Bachelor's degree in Pharmaceutical Sciences, Chemistry, Biology, or a related technical field. 1-3 years of experience in a pharmaceutical or GMP-regulated environment. Solid understanding of cGMP, GDP, and FDA regulations. Experience with batch record review, deviation handling, and change control processes. Familiarity with document management systems (e.g., MasterControl). Strong attention to detail and accuracy in reviewing technical and regulatory documents. Excellent written and verbal communication skills for cross-functional collaboration. Ability to work independently and manage multiple priorities in a fast-paced environment. The main expectations and responsibilities for this position are: Review batch production and packaging records for accuracy, completeness, and GMP compliance prior to product release. Perform in-process line checks and quality inspections to ensure adherence to SOPs and specifications. Support deviation and change control processes, ensuring timely investigation and documentation. Participate in internal audits, walkthroughs, and inspection readiness activities. Maintain and update controlled documents, including SOPs, MBRs, and validation protocols. Collaborate with Quality Control, Production, and Engineering to resolve quality issues and drive continuous improvement. Ensure all QA activities are properly documented in accordance with GDP and data integrity principles. Support training, risk assessments, and compliance reviews as assigned by QA management. If this sounds like something that is of interest to you, please don't hesitate to apply to start a conversation. We look forward to getting to know more about you and the skills you can bring to a company like RK Pharma Inc.

Date 06/2025 Title Associate, In-Process Quality Assurance MFG/PKG Department Quality Assurance Operation Support Reports to Quality Assurance Manager/ VP of QA FLSA (Exempt or Non-Exempt Non-Exempt Role Overview The IPQA performs line inspection as part of the cGMP, SOPs, and policy compliance requirements as per CFR part 111. Performs In-process quality testing in manufacturing and/or packaging areas according to prescribed timelines and accurately captures test results in batch records. The Inspector performs calibrations & measurements on raw materials, bulk products, finished products and packaging components as required in batch records and SOP's. This position reports to the QA Manager and is a key member of the Quality Assurance group. The IPQA Associate is a highly organized self-starter who can work independently, demonstrates a positive attitude, and a bias for action. Areas of Responsibility IPQA - Level 1: To support In-process quality assurance activities by performing routine checks and verifications during manufacturing and/or packaging of nutraceutical products. This role ensures that all processes comply with applicable GMP, SOPs, and regulatory requirements. Key Responsibilities: ???? Manufacturing Support Perform line clearance before starting blending, granulation, compression, encapsulation, coating processes. Perform In-process checks: Blend uniformity sampling Tablet/capsule weight variation Hardness, friability, and disintegration tests etc as applicable Verify equipment cleaning and area hygiene as per SOP. Collect and label In-process and stability samples under supervision. ???? Packaging Support Ensure line clearance before packaging activities. Perform In-process checks: Batch number and expiry date printing Label application and carton sealing Primary and secondary packaging integrity etc as applicable Assist in reconciliation of packaging materials (e.g., printed cartons, leaflets, labels). ???? Documentation Record observations in IPQA checklists, logbooks, and batch records. Maintain GMP documentation in real-time (legible and error-free). Escalate any deviation or abnormality immediately to the QA Executive/Supervisor. ???? Compliance & Safety Adhere to company GMP, SOP, and Hygiene policies. Use PPE appropriately. Support during internal/external audits by providing necessary records. Cleans up work following the completion of a shift. Meets all safety expectations and follows all safety practices. Works extended hours and occasional weekend overtime. Other duties as assigned Other Responsibilities Including Safety: IPQA - Level 2: To independently perform and document In-process quality assurance activities at all critical stages of manufacturing and packaging of nutraceutical products, ensuring compliance with GMP, SOPs, and regulatory requirements. Key Responsibilities: ???? Manufacturing Stage (Granulation, Blending, Compression, Encapsulation, Coating ) Carry out and document line clearance activities before starting each manufacturing batch. Conduct in-process checks independently: Blend uniformity sampling Tablet/capsule weight variation Hardness, friability, thickness, and disintegration In-process controls as per BMR specifications Verify equipment cleanliness status, calibration, and logbook entries. Monitor and record environmental conditions in production areas (temperature, RH, differential pressure). ???? Packaging Stage Conduct line clearance for primary and secondary packaging (bottles, strips, blister, cartons). Perform and document: Batch coding verification (batch no., Mfg/Exp date) Packaging material correctness (labels, leaflets, cartons) Sealing integrity checks (blisters, induction seals) Online rejection bin and reconciliation checks Ensure correct usage of approved packaging materials with status labels. ???? Documentation & Compliance Fill Batch Manufacturing Records (BMR) and Batch Packaging Records (BPR) in real-time. Record IPQA observations and results as per SOPs ( legible and error free). Initiate and report deviations, OOS/OOT, and non-conformities to QA Supervisor/ Manager. Support CAPA implementation and change controls. ???? General QA Duties Ensure compliance with GMP, GLP, and data integrity principles. Follow gowning protocols, hygiene, and safety measures in production areas. Assist during internal audits and regulatory inspections by providing accurate documentation and data. Cleans up work following the completion of a shift. Meets all safety expectations and follows all safety practices. Works extended hours and occasional weekend overtime. Other duties as assigned Other Responsibilities Including Safety: IPQA - Level 3: To lead and monitor In-process QA activities during nutraceutical manufacturing and packaging operations. Ensure compliance with GMP, regulatory standards, and internal SOPs by supervising IPQA teams, reviewing records, and addressing quality deviations. Key Responsibilities: ????IPQA Oversight - Manufacturing & Packaging Supervise and verify line clearance activities across all manufacturing and packaging areas. Ensure compliance with critical process parameters (CPPs) and critical quality attributes (CQAs). Review and approval: In-process checks: weight variation, hardness, friability, disintegration etc as applicable Environmental monitoring records Equipment and area cleaning records Coordinate and monitor sampling activities for In-process, finished products and stability studies. ???? Review and Verification Review and verify completed Batch Manufacturing Records (BMR) and Batch Packaging Records (BPR). Cross-check reconciliation of raw materials and printed packaging materials. Verify proper use of status labels (approved/rejected/quarantine). ???? Deviation & CAPA Management Investigate and document process deviations, non-conformances, and OOS/OOT incidents. Lead root cause analysis (RCA) and implement Corrective and Preventive Actions (CAPA). Coordinate with cross-functional teams (Production, QC, Regulatory Affairs) to ensure closure of quality events. ???? Audit & Compliance Ensure readiness for internal, external, and regulatory audits (FSSAI, WHO-GMP, USFDA, etc.). Conduct routine GMP audits, spot checks, and area inspections. Train shop-floor personnel on data integrity, documentation practices, hygiene, and gowning protocols. ???? Team Coordination Guide and mentor IPQA Level 1 and Level 2 personnel. Allocate daily QA responsibilities and monitor adherence to QA procedures. Conduct on-the-job training for new team members Cleans up work following the completion of a shift. Meets all safety expectations and follows all safety practices. Works extended hours and occasional weekend overtime. Other duties as assigned Other Responsibilities Including Safety: Meets all safety expectations and follows all safety practices. Works extended hours and occasional weekend overtime. Other duties as assigned Other Responsibilities Including Safety: N/A Other Responsibilities Including Safety: Works in a safe and responsible manner to create an injury-free and incident-free workplace. Complies with all job-related safety and other training requirements. Keeps management informed of area activities and of any significant problems. Requirements Education & Qualification: IPQA - Level 1: 0-1 year (Freshers with training or internship in QA preferred) Or equivalent combination of education and experience. High School diploma is required; BS degree in a life science discipline (e.g., Chemistry, Microbiology, Biochemistry) a plus. IPQA - Level 2: Minimum of 3+ years of experience in a QA Inspector within a nutritional's supplements, food, consumer products or pharmaceutical company. Or equivalent combination of education and experience. BS degree in a life science discipline (e.g., Chemistry, Microbiology, Biochemistry) a plus. IPQA - Level 3: 3-5 years in IPQA or related QA roles in nutraceuticals, pharmaceuticals, or food manufacturing. Or equivalent combination of education and experience. BS degree in a life science discipline (e.g., Chemistry, Microbiology, Biochemistry) a plus. Certifications, Licenses, Credentials: N/A Skills & Ability IPQA - Level 1: Basic understanding of GMP, nutraceutical processes, and QA principles. Good observation and attention to detail. Willingness to work in production areas (shifts, growing zones). Ability to follow instructions and standard procedures accurately. Basic proficiency in English and documentation practices. IPQA - Level 2: Strong knowledge of IPQA functions, SOPs, and process flow in nutraceuticals. Understanding of basic analytical parameters (weight variation, friability, etc.). Good documentation and observational skills. Proficient in using basic lab and QA tools (weighing balances, disintegration testers). Familiar with regulatory guidelines (FSSAI, WHO-GMP, USFDA, HACCP). IPQA - Level 3: In-depth understanding of nutraceutical manufacturing processes and regulatory compliance. Proficient in QA documentation, process audits, and deviation handling. Strong analytical and decision-making skills. Familiar with QMS tools, GMP documentation, and data integrity principles. Working knowledge of SOP writing, change control, and risk assessment. Physical Requirements (lifting, etc.): Ability to lift up to 35 lbs.; occasionally lift and move up to 50 pounds. Must stand and walk on production floor a minimum of 6 hours per shift Uses hands to finger, handle, feel, or operate objects or controls, lifting to waist height and/or above shoulder height, frequent bending from waist, or squatting, walking short distances. Occasionally works from a rolling ladder or step stool. Must be able to wear all PPE including lab coat, face mask, booties, gloves, safety glasses. Work Environment (Office, Warehouse, temperature extremes, etc.): Work is regularly performed inside a manufacturing and packaging environment where temperatures can be moderate, exposure to dust, odors, noise, and fumes. The noise level is usually moderate. Employees can be exposed daily to chemicals and cleaning agents. The above statements are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all the job responsibilities, duties, skill, or working conditions. In addition, this document does not create an employment contract, implied or otherwise, other than an "at will" relationship. The above statements are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all the job responsibilities, duties, skill, or working conditions. In addition, this document does not create an employment contract, implied or otherwise, other than an "at will" relationship. USPL is proud to be an Equal Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy), sexual orientation, gender identity or expression, national origin, age, genetic information, disability, protected veteran status, or any other characteristic protected by applicable local, state, or federal law. Benefits And Compensation: Our benefits are designed to help you move forward in your career, and in areas of your life outside of USPL. From health and wellness benefit options including: medical, dental, vision, short and long term disability, basic life insurance, supplemental life insurance, AD&D insurance. We also offer a matched 401(k) savings plan. Employees have the opportunity to receive compensation in the form of premium pay such as overtime, shift differential, holiday pay, sick time, etc. Newly hired employees receive up to 10 days of vacation the first year, which grows to 12 days starting the second year of employment. First shift$24.00 to $30.50Second Shift$24.00 to $31.00 3rd shift 11.00 PM to 7:30 PM

The Quality Technician in microbiology aseptic processes ensures products meet microbiological standards and are manufactured in a sterile environment. This role monitors quality assurance standards and encourages the team to consistently deliver excellent results. The Quality Technician is responsible for executing best practices, goals, and established standards for the team. Primary Responsibilities * Perform tests to identify harmful microorganisms, maintain a sterile environment, and ensure regulatory compliance * Document and analyze test results following good laboratory practices for microbiology and quality control laboratories * Identify and address production issues, contributing to corrective action * Inspect work daily, maintain cleanliness, organize supplies, and assemble sterile products using aseptic technique * Handle biohazard spills, train new hires, and demonstrate the use of cleaning chemicals * Uphold quality standards, follow GFSI, HACCP, and GMP guidelines, and participate in food safety inspections * Support sanitation operations, monitor performance, and provide report * Address customer complaints, conduct audits, and contribute to quality assurance improvements * Promote continual improvement and collaborate on cross-functional projects * Perform routine environmental monitoring within cleanrooms and production areas to detect microbial contamination * Conduct microbiological assays on raw materials, in-process samples, and finished products using various techniques * Accurately record and interpret test results, maintaining detailed documentation of activities, including deviations, investigations, and corrective actions * Participate in investigations for out-of-specification (OOS) results, deviations, and complaints related to microbiology testing * Ensure proper calibration and maintenance of laboratory equipment used for microbiological analysis and QC testing Prior Knowledge/Experience * Bachelor's Degree in Microbiology, Biology, or related field * 1-3 years of experience in quality; food processing experience preferred * Strong understanding of aseptic techniques and microbiology principles * Experience with various microbiological testing methods, including plate counting, membrane filtration, and rapid microbial detection * Proficiency in data analysis, documentation, and recordkeeping * Excellent attention to detail; ability to work independently and in team environments * Familiarity with GMP regulations and quality systems * Ability to utilize provided PPE - safety glasses, ear plugs/muffs, bump caps, dust masks, company uniform, safety shoes * Ability to be respirator certified if required * Physical ability to sit, stand, walk, climb, stoop for up to 8 hours; lift 55 lbs consistently; lift/hold objects overhead for extended periods * Ability to climb and work on a 40-foot extension ladder for extended periods as needed; work at heights up to 50 feet * Ability to maneuver and work in confined areas with variations in temperature, humidity, and air quality The following common allergens are processed in our facilities: wheat, eggs, dairy, and soy. Looking for a Career for Good? We offer a competitive compensation and benefit package, designed to promote a Happier, Healthier You which includes: Compensation: * Compensation for this role is hourly and will be based on your experience, skills, and location, with a typical range between $24.69/HR and $30.87/HR. * This role is eligible for a targeted annual bonus equal to $3500. Final bonus payouts are determined by both individual and company performance. Benefits: * Medical coverage starts the first of the month-no waiting period * Immediate 401(k) eligibility with fully vested matching contributions * Over 5 weeks of paid time off in your first year * Free life coaching, onsite health exams, and 24/7 access to Registered Nurses * Lifestyle Spending Account #LI-DNI Apply now * Apply Now * Start applying with LinkedIn

Proven is an interactive design and development consultancy that blends creative vision with technical expertise to craft digital experiences that matter. We partner with non-profits and mission-driven organizations, leveraging our design, engineering, and strategic capabilities to drive meaningful impact. We're looking for a full-time Quality Assurance Associate to serve as the primary owner for quality assurance across our projects. In this role, you will design and execute test strategies and plans for web applications, working within an Agile framework and collaborating closely with project managers, developers, and clients. You will help ensure that every release meets both functional requirements and Proven's high quality standards. Key Responsibilities Lead and track all QA activities across assigned projects. Create, execute, and maintain test plans and test cases based on user stories, acceptance criteria, and requirements. Perform functional, system, integration, regression, and performance testing to ensure consistency and reliability across environments and systems. Identify, prepare, and manage test data for manual and (when applicable) automated testing. Collaborate with clients and internal teams to define, refine, and validate user acceptance criteria. Validate all tickets resolved by the development team prior to release, ensuring they meet requirements and are production-ready. Automate regression test scripts where appropriate and help evolve our automated testing coverage and standards. Identify, document, and prioritize defects; track them through resolution. Proactively surface risks, dependencies, and quality concerns to the project manager and team. Contribute to improving QA processes, tools, and documentation over time. Qualifications and Experience You are hyper-organized, detail-oriented, and comfortable independently owning your work to ensure quality and client satisfaction. 3+ years of experience working in a QA or testing role at a technology company, digital agency, or similar environment. Experience working as a tester on technical projects within an Agile software development lifecycle. Hands-on experience with several of the following: Functional and regression testing System and integration testing Performance, load, and speed testing User acceptance testing (UAT) Working knowledge of modern web development technology stacks (e.g., common front-end frameworks, APIs, CMS platforms) and how they impact testing. Strong analytical and problem-solving skills; you can not only find bugs, but also help the team understand impact and potential root causes. Excellent written and verbal communication skills; you're comfortable collaborating with cross-functional teams and interacting with senior stakeholders. Experience working remotely with distributed teams. Bachelor's degree in engineering, computer science, or a related field, or equivalent relevant experience. Why Join Proven? Mission-Driven Work: Help organizations that make a real impact in the world. Collaborative Culture: Work alongside talented designers, strategists, and engineers. Growth Opportunities: Shape the future of Proven's technology team and strategy. Remote Flexibility: Work from anywhere while leading a distributed team.

Lupin U.S. is comprised of a fast growing, innovative and robust team of manufacturing, Research and Development and commercial divisions. Somerset, New Jersey is home to one of eighteen commercial manufacturing sites globally and the only commercial manufacturing facility in the United States for Lupin. Somerset, New Jersey is also the location for Lupin's U.S. Sales Operations and Marketing divisions, as well as internal Product Development teams. Lupin has a significant generic pipeline and a growing Specialty Brand presence in the U.S. Our Inhalation Research and Development facility is located in Coral Springs, Florida focusing on generic and branded orally inhaled and nasal drug products. Key shared service functions are found at our beautiful harbor side location in Baltimore, Maryland. Adding to Lupin's U.S. footprint is a robust team of Clinical Operations experts in Blue Bell, Pennsylvania and a high performing Specialty salesforce located across the country. Lupin is prided on being people-focused and centered around how impactful we are with our customers. Join our U.S. team and become part of an organization that encourages professional development and innovation! We are looking for passionate and driven individuals who will help us to continue making medicine widely accessible to patients, and who strive to work by Lupin's Core Values of Teamwork, Passion for Excellence, Entrepreneurial Spirit, Respect and Care, Integrity, and Customer Focus. Responsibilities Role Summary The QA Associate is responsible for the assurance of the manufacturing activities within the Lupin Somerset sites. This position is responsible for working in the warehouse, process rooms, and packaging lines and evaluates all activities meets the acceptance criteria. This position will require 2nd shift hours: 2:00 p.m. - 10:30 p.m. Monday - Friday Essential Duties and Responsibilities Sample, inspect incoming raw materials, components, in-process, intermediates, and finished products and submits samples to the QC laboratory for analysis. Inspect the manufacturing equipment/rooms and packaging lines/ equipment for cleanliness and approve them for use before the start of the operation Perform QA in-process checks (Beginning, Middle and End) for manufacturing/packaging operations and determine the results meets against pre-determined standards and batch record Conduct AQL inspections on incoming materials and finished dosage forms against pre-determined Quality attributes. Collect and maintain QA Retain samples from all products manufactured. Assure that all retains are stored appropriately for accountability, annual inspection Sample and proofread all pharmaceutical labeling for conformance to the standard. Issues approved labels to the packaging lines for use. Inform immediately any manufacturing/packaging issue to the QA supervisor Assure all activities are following the batch records, departmental SOP's, GMP, and DEA regulations. Review of online batch records in terms of completeness of signatures, entries, and actual reconciliation/yields. Ensure the proper isolation of rejected or defective product/ material generated during the batch process and accountability in the batch record. Monitor facility and product environmental operating conditions. Provide necessary support to conduct root cause analysis for any incidents generated at the facility during all phases of the production and packaging process. Perform other QA duties as assigned Qualifications Education & Experience An Associate Degree or a Bachelor's Degree in a scientific field is preferred Minimum 3+ years' experience in a Quality Assurance role in the pharmaceutical industry Knowledge of the pharmaceutical manufacturing and/or packaging process Communication skills: Excellent command of written and spoken English Attention to detail is paramount Desire to achieve a high quality of work and diligent about following Standard Operating Procedures Knowledge and understanding of cGMPs, keeping up to date with current industry issues and changing regulations. SAP, Trackwise, LIMS or similar QMS system knowledge preferred Lupin is an equal opportunity and affirmative action employer. All qualified applicants will receive consideration for employment without regard to race, color, national origin, gender, religion, age, disability, veteran status, or any other classification as required by applicable law. The anticipated annual base salary range for this position in New Jersey is $45,000 to $63,000, plus a discretionary performance bonus (based upon eligibility). The final salary offered to a successful candidate may vary and will be dependent on several factors that may include but are not limited to: the type and length of experience within the job, the type and length of experience within the industry, skillset, education, business needs, etc. Lupin is a multi-state employer, and this salary range may not reflect positions that work in other states. Physical Requirements The physical requirements of the position generally include: standing, walking, sitting, using hands and fingers, reaching with hands and arms, talking and hearing. In some circumstances, bending, kneeling, crouching, stooping, and crawling may apply. This position may require lifting up to 15 pounds occasionally. Generally, work is performed in a manufacturing environment. Search Firm Representatives Please Read Carefully Lupin USA, and its Affiliates does not accept unsolicited assistance from search firms for employment opportunities. All CVs / resumes submitted by search firms for any current openings at our company without a valid written search agreement in place will be deemed the sole property of Lupin. No fee will be paid in the event a candidate is hired by Lupin as a result of an agency referral where no pre-existing agreement is in place. Where agency agreements are in place, introductions are position specific. Please, No phone calls or emails. #LI-CC #LI-DNI

Since 1946, The Jet Pulverizer Company, Inc. has been committed to providing state-of-the-art processing equipment and services. The continuous technological advancement of our line of Micron-Master Jet Pulverizers and ongoing modernization and expansion of our Custom Grinding Division provide our customers with unsurpassed value and quality in both jet pulverizing equipment and custom grinding services. The Quality Technician plays a crucial role in ensuring the safety, quality, and compliance of products manufactured within our FDA-regulated micronization facility. This position involves monitoring production processes, conducting inspections, and collaborating with cross-functional teams to maintain high standards. Requirements Essential Duties of the QC Lac Tech: PRIORITY - Product sample testing as required Complete paperwork on a timely basis Create sample composites and retains as indicated by customer need Generate CoA's as required Stock sample cups and lids Monitor lab consumables and order as needed Maintain clean lab Monitor calibration status of instrumentation and calibrate as required Perform routine inspections of raw materials, intermediate products, and finished goods. Utilize precision measuring instruments and testing equipment to verify product specifications. Identify any deviations from quality standards and report findings promptly. Monitor micronization processes, including particle size reduction, blending, and packaging. Collect samples at various stages of production for analysis. Ensure adherence to standard operating procedures (SOPs) and regulatory guidelines. Maintain accurate records of inspections, test results, and corrective actions. Prepare quality reports and communicate findings to supervisors and management. Collaborate with the Quality Assurance team to address non-conformities. Assist during internal and external audits, including FDA inspections. Ensure compliance with cGMP (current Good Manufacturing Practices) and other relevant regulations. Support the implementation of quality management systems. Provide guidance on quality-related matters to colleagues. Foster a culture of quality awareness and accountability. Must be willing to work overtime as needed, including some mandatory weekend shifts. Experience/Skills HS Diploma required. Associate degree preferred. Computer proficiency - Microsoft Windows/Outlook, Microsoft Office 1 - 2 years lab experience Experience working in an FDA-regulated environment (pharmaceuticals, medical devices, or related industries). Proficiency in using measurement tools (calipers, micrometers, etc.) and analytical instruments. Knowledge of cGMP, ISO standards, and quality control principles. Strong attention to detail, problem-solving skills, and ability to work independently. Excellent communication and teamwork abilities. Salary Description $20 - $21 / hour

The Quality Technician's role will be seen as pivotal in our efforts to drive at-source quality at ALMAG. The role requires the individual to support new product introduction, provide quality training, support, and to work collaboratively with various teams to develop standard work and ensure compliance. DUTIES AND RESPONSIBILITIES The quality technician's primary responsibility is to positively support the various departments in assuring that the requirements of the customer and quality management system are being met throughout each department. Additionally, the quality technician contributes to the continuous improvement of Almag's quality system. The duties and responsibilities of the Quality Technician are detailed below, but not limited to the following: Supporting the New Product Introduction process by assuring new customer requirements are understood and achieved. Responsible for performing audits of various departments to ensure that the QMS requirements are being met. Communicate new product status, its performance based on data, and provide samples and feedback to the respective departments with continuous improvement approach in mind. Responsible for collecting samples as required for various customer and internal requirements. Responsible for tracking and supporting Quality Containment processes for nonconforming product in all departments. Responsible for supporting production team in achieving customer requirements through training, auditing, and development of standard documents. Provide direction and support to any special sorting if needed, with the focus on accuracy and efficiency of sorting. Perform product testing for mechanical properties. Support team lead and shift supervisors to determine criteria for acceptance or rejection when there is uncertainty. Provide direction to the team if clarification is required for WO notes or requirements. Perform other related duties as assigned. Requirements MINIMUM QUALIFICATIONS Education/Experience At least 3 years' experience in quality, working in manufacturing environment. ASQ Certified Quality Technician (CQT) would be an asset. Certified Internal Auditor would be an asset. Technical Skills/Competence Excellent teamwork and collaboration across departments and within teams Work Efficiently Flexibility/Adaptability to meet customer business requirements. Communicate clearly and effectively, verbally and in writing. Must be able to read and understand engineering drawings. Basic knowledge of GD&T would be an asset. Ability to work and make decisions independently. Good mechanical aptitude and attention detail. Must be competent in the use of measuring instruments i.e. Calipers, micrometers. Basic proficiency with MS-office (Excel, Word, PowerPoint). Fork Lift Certified Benefits Profit Sharing Education Assistance Program Social Events Safety Shoe and Glasses Allowance Internal Growth and Development Health and Dental Life and AD&D Vision Critical Illness Insurance Long Term Disability

An independent, family-owned business in Philadelphia, I. Rice & Co. has been making quality food products and flavors since 1884. With considerable growth and expansion, we are looking for qualified employees to help in a variety of positions. As a food manufacturing plant, I. Rice & Co. offers a diverse range of employment opportunities, from production coordination to warehouse stocking and inventory organization. With a passionate community, competitive pay, and generous bonus incentives, I. Rice offers ample opportunity for personal and professional growth. QUALITY CONTROL SENIOR LAB TECHNICIAN This permanent, full-time position supports the Quality Assurance department. The Senior Lab Technician plays a critical role in maintaining and enhancing our commitment to food safety and quality. This hands-on position combines technical expertise with leadership, performing daily functions in the lab, while also supporting the Director of Quality Assurance with administering department operations, validating program CCPs, and participating in audits. Knowledge of laboratory principles is required. Product testing includes brix, pH, water activity, titrations, viscosities and organoleptic evaluations. Environment is a clean and modern lab working with terrific people. Essential Job and Duties - Perform analytical tests on raw materials and finished products - Maintain extensive record keeping - Assist with auditing and maintaining SQF, GMP, & HACCP programs at the plant - Calibrate laboratory equipment - Participate in company audits - Work with production to make adjustments to batches in order to adhere to product specifications - Run batch freezer to make finished product for further study and sensory evaluation - Measure and verify raw materials needed for batching - Respond to customer questions or concerns in a professional and appropriate manner - Inspection of inbound receipts - Maintain the finished goods retention library - Sample finished product for microbial analysis - Maintain raw material specification documentation and product specification documentation - Maintain finished product specification documentation This position is supported by a team of technicians performing similar tasks. Our products, equipment, and methods are continually evolving. The duties associated with this position will change and evolve as needed. This individual is required to be willing and able to take on new responsibilities as needed. Education and Experience - Bachelor's Degree in Food Science, R&D, or related course of study preferred - 5 years of related quality assurance or lab experience - Experience with FDA, USDA, GFSI, SQF, FSMA, GMP, GLP, HACCP preferred Skills and Expectations - Ability to prioritize and organize ones work load - Ability to work in a team environment as well as individually in an environment with changing priorities - Comfortable working on an active busy production floor among batching and packaging equipment. - Ability to manage time effectively - Maintain proper lab conditions and equipment maintenance - Maintain proper record keeping and perform data entry - Be capable of working in various work settings of the facility including laboratory, office and plant areas - Perform basic math skills - Proficient computer skills, including above average knowledge of MS Excel - Understand and perform scaling/measuring in standard and metric formats - Food industry experience preferred. - Lifting and carrying up to 50 pounds - Being able to withstand extended periods of time on one's feet - Working and walking in a wet environment Benefits Benefits and Compensation - Weekly pay with direct deposit - Health insurance - Various supplemental insurance policies available after 90-day introductory period - Life insurance available after completion of 90-day introductory period - 401-K retirement plan available after one year of employment - Option to participate in uniform program - Annual bonus incentives I.Rice is an equal opportunity employer and derives our staff skills through a diverse and talented workforce. This person will work closely with all departments and persons in our facility and must conduct themselves professionally at all times.

KMM Group offers rewarding opportunities to propel the world forward through mission critical components for air, space, life-saving equipment and more. You don't want to miss out on this opportunity! A few of our Company Values: Paid to Think Make it Fun Choose Positive Support Each Other Strive for Excellence Inspire Passion Job requirements Quality Technician, Wire Grind (QTWG) 📍 Hatboro, PA | Full-Time At KMM Group, Ltd., we craft mission-critical components that fuel life-saving medical devices and cutting-edge aerospace systems. We are seeking a Quality Technician, Wire Grind (QTWG) to join our team. The QTWG requires an acute eye for detail and strong visual acuity. Though there is some aspect of dimensional measurement in the position, a greater percentage of the work is connected to the visual inspection of critical characteristics of guidewires/corewires (GW/CW) 🔧 What You'll Do Tactical Responsibilities a. Visual inspection of GW/CW i. Roll test ii. Length test iii. PTFE damage b. Tensile testing as required c. Perform final dimensional inspection operations as required (if applicable) d. Perform FAI as required (if applicable) e. Document all findings using Good Documentation Practices (GDP) f. Wash wires g. Package wires Strategic Responsibilities Become proficient at all aspects of the visual inspection process for GW/CW in order to maximize the throughput of wires through QC Physical Requirements and Demands: Keen attention to detail is required for success in QC Ability to sit at a desk, or QC work station, for prolonged periods of time ✅ What You Bring: High School diploma or equivalent Prefer experience in a manufacturing-based pre-apprenticeship program which offers; i. Basic understanding of GD&T ii. Basic understanding of use of measuring instruments 🚀 Why Join KMM Group? Meaningful Work - Build and inspect parts that power technologies protecting and improving lives Innovation Culture - We live our values: Paid to Think, Make it Fun, Support Each Other, Strive for Excellence, Inspire Passion Team-Driven Environment - Join a group of professionals who value precision, integrity, and impact Career Growth - Expand your technical skillset and shape your career within a forward-thinking organization 🛡️Benefits & Perks Offered: Healthcare: Medical, Prescriptions, Dental Vision Insurance Life & Disability Insurance Supplemental: Health Insurances (Hospital Indemnity, Critical Illness Care, etc. - Paid by Employee Total Wellbeing Programs & Mobile Mental Health Hub Financial Academy Paid Holidays and PTO 401k Plan w/Employer Match Employee Assistance Program (EAP) Professional Development Programs, Education Dedicated Manager of Training Dedicated HR staff to support your needs Benefits related Employee Advocacy Team ***All benefits listed herein are for information purposes and subject to change. NOTE: KMM is an ITAR Registered Facility and thus anyone applying for this role must be a US Citizen or have a valid Green Card. ***Offered Compensation is commensurate with experience. All done! Your application has been successfully submitted! Other jobs

Since 1869, we've connected people through food they love. We're proud to be stewards of amazing brands that people trust. Our portfolio includes the iconic Campbell's brand, as well as Cape Cod, Chunky, Goldfish, Kettle Brand, Lance, Late July, Pacific Foods, Pepperidge Farm, Prego, Pace, Rao's Homemade, Snack Factory, Snyder's of Hanover. Swanson, and V8. Here, you will make a difference every day. You will be supported to build a rewarding career with opportunities to grow, innovate and inspire. Make history with us. Why Campbell's… Benefits begin on day one and include medical, dental, short and long-term disability, AD&D, and life insurance (for individual, families, and domestic partners). Employees are eligible for our matching 401(k) plan and can enroll on the first day of employment with immediate vesting. Campbell's offers unlimited sick time along with paid time off and holiday pay. If in WHQ - free access to the fitness center. Access to on-site day care (operated by Bright Horizons) and company store. Giving back to the communities where our employees work and live is very important to Campbell's. Our “Campbell's Cares” program matches employee donations and/or volunteer activity up to $1,500 annually. Campbell's has a variety of Employee Resource Groups (ERGs) to support employees. How You Will Make History Here… As a Senior Technician - QA, you will play a critical role in ensuring the highest standards of food safety and quality in our plant operations. You will manage regulatory compliance, oversee quality assurance programs, and support continuous improvement initiatives that uphold our commitment to excellence. What You Will Do… Execute daily distribution, collection, and review of control documentation for product manufacturing and release, ensuring compliance with quality standards and product specifications. Collaborate with production teams to monitor processes and drive efficiency and continuous improvement. Support preparation and execution of third-party and regulatory audits by maintaining food safety and quality policies, standards, and procedures. Plan and execute work through eMaint Application as Site Administrator. Manage Environmental Monitoring Program (EMP) and Alchemy training program for quality and safety. Oversee in-process quality for plant operations and Kitchen 1869, including routine sample analyses and adherence to Good Laboratory Practices. Conduct GAP assessments, root cause analysis, and manage corrective and preventive actions (CAPA). Support plant safety processes through audits, corrective actions, and document management. Other duties as assigned. Who You Will Work With… You will collaborate closely with: Plant Operations and R&D teams, including Kitchen 1869. Quality Manager and North American Supply Chain Quality group. USDA onsite officials and third-party auditors. What You Bring to the Table… (Must Have) High School Diploma required Minimum 3 years of experience with a BS degree OR 8 years in a fast-paced food manufacturing environment. Strong verbal and written communication skills. Proven planning, organizing, leadership, and teamwork abilities. Knowledge of canning and thermal processing. Background in food processing and quality assurance. Ability to drive quality initiatives in a dynamic environment. Problem-solving and analytical thinking skills. Proficiency with computer systems, SharePoint, and Microsoft Office Suite. It Would Be Great If You Have… (Nice to Have) BS in Food Science preferred. Experience with HACCP/FSP plans and GFSI audit standards. Familiarity with Alchemy training systems and eMaint planning tools. Understanding of regulatory compliance and food safety programs. Compensation and Benefits: The target base salary range for this full-time, salaried position is between $54,600-$78,400 Individual base pay depends on work location and additional factors such as experience, job-related skills, and relevant education or training. Total pay may include other forms of compensation. In addition, we offer competitive health, dental, 401k and wellness benefits beginning on the first day of employment. Please ask your Talent Acquisition Partner for more information about our total rewards package. The Company is committed to providing equal opportunity for employees and qualified applicants in all aspects of the employment relationship, including consideration for employment, without regard to race, color, sex, sexual orientation, gender identity, national origin, citizenship, marital status, protected veteran status, disability, age, religion, or any other classification protected by law.

Job DescriptionOVERVIEW: Quality Control Technician:The Quality Control Technician will play a critical role in ensuring products are packaged correctly and meet quality standards before they are shipped to customers. The primary objective of the Quality Control Technician - Manufacturing is to identify and rectify defects or deviations from established quality criteria to maintain high product quality. This position runs Monday - Friday, with the following shifts: 2nd Shift: 2:00 PM - 10:30 PM 3rd Shift: 10:00 PM - 6:30 AM QUALIFICATIONS: Quality Control Technician: High school diploma or equivalent qualification. Certification in quality control is preferred. Must have food manufacturing experience. A minimum of 2 years' experience in a similar role. Excellent knowledge of MS Office. Good math, technical, and communication skills. Strong understanding of quality control standards and testing techniques. KEY RESPONSIBILITIES: Quality Control Technician: Perform thorough inspections of raw materials, components, and finished products to check for defects, non-conformities, and deviations from quality standards. Work closely with production teams to ensure that manufacturing processes are in compliance with quality standards and are carried out correctly. Inspect finished produced goods to ensure their quality and adherence are up to specifications. Keep detailed records of inspections, testing results, and any deviations from the quality standards up-to-date and maintained. Reject all products and materials that fail to meet quality expectations. Collect and take samples of production batch to ensure products are meeting standards. Identify opportunities for process improvement and suggestions on changes to enhance efficiency and product quality. Ensure that inspection and testing equipment are regularly calibrated to maintain accuracy and reliability. Investigate the root causes of quality issues, collaborate with cross-functional teams, and recommend corrective and preventive actions to prevent future occurrences. Conduct internal audits of manufacturing processes and procedures to ensure ongoing compliance with quality standards and regulations. Maintain open and effective communication with production staff, quality assurance teams, and management to ensure everyone is aligned on quality goals and expectations. Prioritize safety in the manufacturing environment, ensuring that quality control activities are carried out safely and in accordance with safety protocols. Other duties as assigned. Onsite Personnel is an equal opportunity employer committed to hiring a diverse workforce in an inclusive culture environment. Onsite Personnel does not discriminate based on disability, veteran status or any other basis protected under federal, state, or local laws

Job Description The Quality Technician's role will be seen as pivotal in our efforts to drive at-source quality at ALMAG. The role requires the individual to support new product introduction, provide quality training, support, and to work collaboratively with various teams to develop standard work and ensure compliance. DUTIES AND RESPONSIBILITIES The quality technician's primary responsibility is to positively support the various departments in assuring that the requirements of the customer and quality management system are being met throughout each department. Additionally, the quality technician contributes to the continuous improvement of Almag's quality system. The duties and responsibilities of the Quality Technician are detailed below, but not limited to the following: Supporting the New Product Introduction process by assuring new customer requirements are understood and achieved. Responsible for performing audits of various departments to ensure that the QMS requirements are being met. Communicate new product status, its performance based on data, and provide samples and feedback to the respective departments with continuous improvement approach in mind. Responsible for collecting samples as required for various customer and internal requirements. Responsible for tracking and supporting Quality Containment processes for nonconforming product in all departments. Responsible for supporting production team in achieving customer requirements through training, auditing, and development of standard documents. Provide direction and support to any special sorting if needed, with the focus on accuracy and efficiency of sorting. Perform product testing for mechanical properties. Support team lead and shift supervisors to determine criteria for acceptance or rejection when there is uncertainty. Provide direction to the team if clarification is required for WO notes or requirements. Perform other related duties as assigned. Requirements MINIMUM QUALIFICATIONS Education/Experience At least 3 years' experience in quality, working in manufacturing environment. ASQ Certified Quality Technician (CQT) would be an asset. Certified Internal Auditor would be an asset. Technical Skills/Competence Excellent teamwork and collaboration across departments and within teams Work Efficiently Flexibility/Adaptability to meet customer business requirements. Communicate clearly and effectively, verbally and in writing. Must be able to read and understand engineering drawings. Basic knowledge of GD&T would be an asset. Ability to work and make decisions independently. Good mechanical aptitude and attention detail. Must be competent in the use of measuring instruments i.e. Calipers, micrometers. Basic proficiency with MS-office (Excel, Word, PowerPoint). Fork Lift Certified Benefits Profit Sharing Education Assistance Program Social Events Safety Shoe and Glasses Allowance Internal Growth and Development Health and Dental Life and AD&D Vision Critical Illness Insurance Long Term Disability