Quality assurance technician jobs in Santa Monica, CA - 1,005 jobs

Job Title: Quality Inspector Duration: 06 Months contract (Potential Temp to Perm) Payrate: $23.75/hr. Shift: 2nd shift, Mon-Fri, 1:45pm-10:15pm Description: Responsible for performing and recording dimensional and visual inspection of parts, assemblies, and final product in coordination with the Engineering, Production, and Manufacturing Engineering departments. Responsibilities: Conduct all levels of product inspections using a variety of inspection instruments and equipment (e.g. CMM, micrometers, calipers, parallels, sine bars, height masters, optical comparator, Johnson gauges, etc.) Verify compliance of finished hardware with drawing requirements based on shop practices as they relate to unfinished hardware. Perform both detailed, assembly-level drawings with appropriate supporting documentation verifying actual results against drawing and/or specification requirements. Correctly read and interpret detailed, assembly-level drawings and customer specifications. Use shop mathematical calculations relative to the complexity of the project (e.g., GD&T, tolerance stack-ups, calculations for areas, angles, lengths, etc.) Execute formal first article reports to AS9102 standards. Mentor inspectors, as needed. Use statistical process control (SPC) symbols and tools along with correct interpretation of associated control plans and charts. Meet deadlines of assigned jobs while maintaining the integrity of the position. Work closely with customer representatives during source inspections and audits. Seek lean process improvements. Requirements: High school diploma/GED 1 year certificate from college or technical school OR 3-5 years related experience and/or training US Citizenship required Skills: Good written and verbal communication skills Excellent problem-solving and analytical skills Keen attention to detail Ability to understand and conform to internal company procedures. Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables. Familiarity with but not limited to: Database, Basic windows/internet browser, ERP/Inventory, Microsoft Office - Excel, Word, Power Point, Blueprint Reading, GD&T Terminology and Symbols, Material finishes, Raw Materials, Mechanical Inspection Blueprint reading capabilities Ability to lift 40lbs Teamwork and collaboration

Job Title: Lab TechnicianJob Description We are seeking a dedicated and driven Lab Technician to join our dynamic team in Lynwood, focusing on Family Practice, Pediatrics, and OBGYN. This role offers the opportunity to gain hands-on experience in both the front and back office, making it ideal for entry-level candidates eager to learn and grow in the medical field. Our comprehensive training program is designed to equip you with valuable skills for a successful healthcare career. Responsibilities + Perform insurance verification and documentation. + Handle referrals efficiently. + Operate lab instrumentation and ensure proper sterilization. + Utilize Athena EMR for patient management. + Provide bilingual support in Spanish for patient interactions. Essential Skills + Proficiency in Athena EMR. + Bilingual in Spanish, with the ability to read, write, and speak fluently. + Strong administrative skills. Additional Skills & Qualifications + Experience with lab instrumentation and sterilization processes. + Ability to work effectively in a fast-paced, high-volume environment. + Previous experience with Nextgen is a plus. Work Environment The role requires working in a fast-paced, high-volume environment, primarily serving Spanish-speaking patients. Flexibility to work at either our Van Nuys or Plaza locations is necessary. Job Type & Location This is a Contract to Hire position based out of Los Angeles, CA. Pay and Benefits The pay range for this position is $21.00 - $21.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: - Medical, dental & vision - Critical Illness, Accident, and Hospital - 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available - Life Insurance (Voluntary Life & AD&D for the employee and dependents) - Short and long-term disability - Health Spending Account (HSA) - Transportation benefits - Employee Assistance Program - Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Los Angeles,CA. Application Deadline This position is anticipated to close on Jan 16, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com (%20actalentaccommodation@actalentservices.com) for other accommodation options.

Job Title : Laboratory Technician Duration : 6+ months Education : High School Diploma. Shift Details : Parking: Free parking. General Description: This is a hands-on position responsible for specimen processing, office administration, and general laboratory support. Receives blood samples delivered by mail, FedEx, courier, etc. Assigns a unique barcode to each specimen and preps samples for testing. Separates blood from serum using a centrifuge. Resolves any issues or concerns related to samples or paperwork.

The primary responsibility of the Production Technician II will be to test/assemble Small Unmanned Arial System products in our manufacturing facility following released engineering drawings and assembly instructions using our work order system. Position Responsibilities Primary duty is the mechanical assembly of subassemblies using small hand and/or power tools. Some soldering may be required Final assembly of ground control equipment and air vehicles Testing and troubleshooting of subassemblies and final assemblies Works with other Production Technicians and Engineering to correct and improve upon any documents related to the assembly process at the required high quality standard Works with manufacturing engineers to improve assembly efficiency, improve product quality, reduce manufacturing costs and validate released assembly/ fabrication documentation Responsible for ensuring that work order protocols are followed and that work order paperwork is completed as the work is performed May also train other technicians to build a product or follow an established assembly process May conduct in-process quality checks to ensure that items built are to established high quality standards Follows established procedures on routine work and may require instruction on new assignments Maintains a clean and safe work environment Other duties as assigned Basic Qualifications (Required Skills & Experience) High School diploma or GED equivalent is required or equivalent combination of education, training, and experience Minimum of 1 - 2 years of experience in a manufacturing or production environment in either electronics or electro-mechanical assembly and test or equivalent combination of education, training, and experience Experience with hand tools, including crimpers, drills, taps, torque wrenches, power tools and air tools is required Ability to read blueprints and schematics is desired Ability to solder as part of assembly function and duties Must have good manual dexterity and basic computer operation skills Must have strong oral and written communication skills to communicate effectively with employees in the Company Strong analytical, problem-solving skills and attention to detail with ability to interpret a variety of instructions furnished in written, oral, diagram or schedule form Other Qualifications & Desired Competencies Vocational training in Electronics or Solder Certification is preferred Versed in Lean Manufacturing methodologies is desired Familiarity with Safety and ESD practices is desired Work with engineering on new product development efforts where documentation and assembly instructions are not yet finalized Applies acquired job skills, company policies and procedures to complete assigned tasks under minimal supervision Able to excel in a fast-paced, deadline-driven environment, where small teams share a broad variety of duties Displays strong initiative and drive to accomplish goals and meet company objectives Takes ownership and responsibility for current and past work products Is committed to learning from mistakes and driven to improve and enhance performance of oneself, others, and the company Focuses on teamwork, collaboration and puts the success of the team above one's own interests Physical Demands Ability to work in a manufacturing environment Ability to frequently use hand tools (e.g. clamps) using light, minimal force Regularly required to sit for long periods and occasionally stand for short periods Frequently lift and/or carry objects of small size between 2lbs and 5lbs Frequently required to use hand to finger, handle, or feel objects, tools, or controls and balance Occasionally required to walk Occasionally required to reach with hands and arms; stoop, kneel, crouch, or crawl; and talk or hear Specific vision abilities required by this job include close vision, peripheral vision, depth perception, and the ability to adjust focus Clearance Level Clearance Level The salary range for this role is: $17 - $24 AeroVironment considers several factors when extending an offer, including but not limited to, the location, the role and associated responsibilities, a candidate's work experience, education/training, and key skills. ITAR Requirement: T his position requires access to information that is subject to compliance with the International Traffic Arms Regulations (“ITAR”) and/or the Export Administration Regulations (“EAR”). In order to comply with the requirements of the ITAR and/or the EAR, applicants must qualify as a U.S. person under the ITAR and the EAR, or a person to be approved for an export license by the governing agency whose technology comes under its jurisdiction. Please understand that any job offer that requires approval of an export license will be conditional on AeroVironment's determination that it will be able to obtain an export license in a time frame consistent with AeroVironment's business requirements. A “U.S. person” according to the ITAR definition is a U.S. citizen, U.S. lawful permanent resident (green card holder), or protected individual such as a refugee or asylee. See 22 CFR § 120.15. Some positions will require current U.S. Citizenship due to contract requirements. Benefits: AV offers an excellent benefits package including medical, dental vision, 401K with company matching, a 9/80 work schedule and a paid holiday shutdown. For more information about our company benefit offerings please visit: ********************************** We also encourage you to review our company website at ******************** to learn more about us. Principals only need apply. NO agencies please. Who We Are Based in California, AeroVironment (AVAV) is a global leader in unmanned aircraft systems (UAS) and tactical missile systems. Founded in 1971 by celebrated physicist and engineer, Dr. Paul MacCready, we've been at the leading edge of technical innovation for more than 45 years. Be a part of the team that developed the world's most widely used military drones and created the first submarine-launched reconnaissance drone, and has seven innovative vehicles that are part of the Smithsonian Institution's permanent collection in Washington, DC. Join us today in developing the next generation of small UAS and tactical missile systems that will deliver more actionable intelligence to our customers so they can proceed with certainty - and succeed. What We Do Building on a history of technological innovation, AeroVironment designs, develops, produces, and supports an advanced portfolio of unmanned aircraft systems (UAS) and tactical missile systems. Agencies of the U.S. Department of Defense and allied military services use the company's hand-launched UAS to provide situational awareness to tactical operating units through real-time, airborne reconnaissance, surveillance, and target acquisition. We are proud to be an EEO/AA Equal Opportunity Employer, including disability/veterans. AeroVironment, Inc. is an Equal Employment Opportunity (EEO) employer and welcomes all qualified applicants. Qualified applicants will receive fair and impartial consideration without regard to race, sex, color, religion, national origin, age, disability, protected veteran status, genetic data, sexual orientation, gender identity or other legally protected status. ITAR U.S. Citizenship required

PL Developments, also known as PLD, is a leading manufacturer, packager, and distributor of over-the-counter (OTC) pharmaceutical products and consumer healthcare goods. The Quality Assurance Technician is responsible for ensuring that products or services consistently meet defined quality standards and customer requirements. They perform inspections, tests, and evaluations to identify and resolve quality issues, contributing to the overall quality of the production process. JOB QUALIFICATIONS: High School Diploma or equivalent required 2-5 years of experience in related field Knowledge of FDA/cGMP guidelines, 21 CFR Parts 111, 210 & 211 preferred Highly organized and strong attention to detail Time management skills and ability to handle multiple tasks on time Excellent oral and written communication skills in English Proficient in Word and Excel Working knowledge of Oracle and Agile preferred Experience with Warehouse Management Systems (WMS) Must be able to drive a forklift, training offered POSITION RESPONSIBILITIES: Manage receiving inspection of all critical components and raw materials Manage and support JIT program Review and report all documentation from shipments prior to release in Oracle Manage NCMR and RMA programs and oversee trailer loading or products slated for destruction Manage physical inventory in NCMR and Quality Cages Write and Review CRNs/NCMRs/CAPA/Investigations/Deviations as needed Maintain the retains program and storage of retains Perform and manage annual review of Finished Good retains Generate reports to look for trends in inspections Suggest solutions to management for trends when required Work with cross-functional departments Assist with investigations as requested QA inquiries from other sites or vendors Train the team on processes as needed Assist Quality Management as needed Physical Requirements: Walking up to 6 hours per day Sitting up to 2 hours per day Occasionally lift up to 30 lbs. Salary Range: $21.50-$22.50/hr BENEFITS: PLD is a proud employer offering many corporate benefits, including: ⠁ Medical and Dental Benefits ⠁ Vision ⠁ 401K with employer match ⠁ Group Life Insurance ⠁ Flex Spending Accounts ⠁ Paid Time Off and Paid Holidays ⠁ Tuition Assistance ⠁ Corporate Discount Program ⠁ Opportunities to Flourish Within the Company PL Developments is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status.

At EY, we're all in to shape your future with confidence. We'll help you succeed in a globally connected powerhouse of diverse teams and take your career wherever you want it to go. Join EY and help to build a better working world. EY is a leader in serving the global financial services marketplace and the only professional services firm with a separate business unit dedicated to the financial services industry - the Financial Services Organization (FSO). Our focused model and bold ambition have put us at the center of the events that continue to reshape and redefine our industry, working side by side with a range of clients from our most venerable institutions to dynamic new entrants across Banking and Capital Markets, Wealth and Asset Management and Insurance. Our purpose is to help build a financial services industry in which financial institutions are trusted and flourish, and the global economy is healthy, growing and secure. If you have a passion for rallying together to solve complex challenges, then come join our dynamic FSO team! The opportunity You will help our clients evaluate and enhance their business. You will be part of our account centric growth strategy focusing on issue-based and competency-driven client needs. That's what differentiates EY in the consulting marketplace. Your key responsibilities Everything you will be involved in comes down to providing excellent customer service and helping ensure your teams do the same. Whether it is; managing multiple client teams, leading IT internal audit engagements, external audit integration, or SOC reporting as well as assisting with business development activities across financial services' sectors, you will build strong relations ships and become a trusted advisor to your clients. Skills and attributes for success Providing guidance and knowledge, participating in performing procedures focusing on complex, judgmental, and/or specialized issues Working with the team/client to create plans for accomplishing engagement objectives. Making sure the strategy complies with professional standards and addresses the inherent risks Briefing the team on the client's IT environment and industry IT trends Maintaining relationships with client management, managing expectations around work products, timing, and deliverables billing Demonstrating a thorough understanding of complex information systems and the client's business/industry Demonstrating excellent project management skills, inspiring teamwork and responsibility with team members. Using current technology/tools to enhance the effectiveness of deliverables and services To qualify for the role you must have A bachelor's degree and at least 5 years of related work experience; or a graduate degree and approximately 4 years of related work experience A degree in business, accounting, finance, computer science, information systems or a related discipline Approximately 5 years of experience working as an IT auditor or IT risk advisor for a public accounting firm, professional services firm or financial services company, or comparable experience as an advisor to a financial services company Solid experience leading IT internal audit, external audit, service organization control reporting and/or IT internal controls engagements and assisting with business development activities within financial services Experience with internal audit risk assessments, SOX/internal controls, Service Organization Control (SOC) reporting, tools and enablers in the financial services sector Strong project management skills Advanced written and verbal communication skills and presentation skills Excellent leadership, teamwork and client service skills. Willingness to travel to meet client obligations Ideally, you'll also have CA, CGEIT, CIA, CISA, CISM, CISSP, CMA, CPA and CRISC certification is desired; non-certified hires are required to become certified within 1 year from the date of hire. Based on an individual's professional background, area of specialization or industry focus, we recognize that other certifications, credentials or experience may be more relevant than the listed certifications and therefore may be acceptable substitutes with written consent of EY's Americas IT Risk & Assurance leadership What we look for We're interested in leaders with a genuine creative vision and the confidence to make it happen. You can expect plenty of autonomy in this role, so you'll also need the ability to take initiative and seek out opportunities to improve our current relationships and processes. If you're serious about auditing and ready to take on some of our clients' most complex issues, this role is for you. What we offer you At EY, we'll develop you with future-focused skills and equip you with world-class experiences. We'll empower you in a flexible environment, and fuel you and your extraordinary talents in a diverse and inclusive culture of globally connected teams. Learn more. We offer a comprehensive compensation and benefits package where you'll be rewarded based on your performance and recognized for the value you bring to the business. The base salary range for this job in all geographic locations in the US is $87,800 to $160,900. The base salary range for New York City Metro Area, Washington State and California (excluding Sacramento) is $105,400 to $182,800. Individual salaries within those ranges are determined through a wide variety of factors including but not limited to education, experience, knowledge, skills and geography. In addition, our Total Rewards package includes medical and dental coverage, pension and 401(k) plans, and a wide range of paid time off options. Join us in our team-led and leader-enabled hybrid model. Our expectation is for most people in external, client serving roles to work together in person 40-60% of the time over the course of an engagement, project or year. Under our flexible vacation policy, you'll decide how much vacation time you need based on your own personal circumstances. You'll also be granted time off for designated EY Paid Holidays, Winter/Summer breaks, Personal/Family Care, and other leaves of absence when needed to support your physical, financial, and emotional well-being. Are you ready to shape your future with confidence? Apply today. EY accepts applications for this position on an on-going basis. For those living in California, please click here for additional information. EY focuses on high-ethical standards and integrity among its employees and expects all candidates to demonstrate these qualities. EY | Building a better working world EY is building a better working world by creating new value for clients, people, society and the planet, while building trust in capital markets. Enabled by data, AI and advanced technology, EY teams help clients shape the future with confidence and develop answers for the most pressing issues of today and tomorrow. EY teams work across a full spectrum of services in assurance, consulting, tax, strategy and transactions. Fueled by sector insights, a globally connected, multi-disciplinary network and diverse ecosystem partners, EY teams can provide services in more than 150 countries and territories. EY provides equal employment opportunities to applicants and employees without regard to race, color, religion, age, sex, sexual orientation, gender identity/expression, pregnancy, genetic information, national origin, protected veteran status, disability status, or any other legally protected basis, including arrest and conviction records, in accordance with applicable law. EY is committed to providing reasonable accommodation to qualified individuals with disabilities including veterans with disabilities. If you have a disability and either need assistance applying online or need to request an accommodation during any part of the application process, please call 1-800-EY-HELP3, select Option 2 for candidate related inquiries, then select Option 1 for candidate queries and finally select Option 2 for candidates with an inquiry which will route you to EY's Talent Shared Services Team (TSS) or email the TSS at **************************.

Job Description Ruggable is a leading direct-to-consumer e-commerce brand based in Los Angeles, California with an extraordinary track record of high, profitable growth. We pride ourselves on having an extremely loyal customer base and a talented team made up of genuinely caring people who take action and deliver results. We are venture-backed and own a patented washable rug design that's disrupting the home décor industry. Our mission is to empower our customers to live vibrantly with beautiful products that don't compromise on function. If you're passionate about consumer products, e-commerce, and high-growth start-ups, keep reading! Please note, this role is onsite five days a week, Monday through Friday, 7-4 or 8-5 pm. Job Summary: We are seeking a Quality Technician to support our daily manufacturing operations. This role helps ensure every product meets our quality standards by supporting the systems that keep our output consistent for customers. The Quality Technician will work closely with on-site Quality, Production, and Engineering teams to identify issues, assist with corrective actions, and reduce variation in our processes. This position plays a key role in maintaining reliable, repeatable production and ensuring compliance with both customer and internal standards. What You'll Do: Perform routine quality checks, measurements, and visual inspections to ensure products create exceptional experiences for our customers Support on-site manufacturing quality process control activities and maintain accurate documentation Assist in maintaining quality records, equipment logs, and inspection documentation to support consistent production and compliance Work directly with local Production, QA, and Engineering teams to provide data and observations during root cause analysis (RCA/CAPA) efforts Monitor visual and dimensional product characteristics, especially color consistency, and promptly communicate discrepancies to supervisors Collect, organize, and report quality and process data for trend analysis and continuous improvement What You'll Need to Have: Required: Associate degree in a technical field or equivalent hands-on experience in quality 0-1 years of experience in a production, quality, or manufacturing support role Working knowledge of basic quality tools (control charts, check sheets, 5 Whys, basic FMEA concepts) Ability to perform accurate measurements, visual inspections, and data collection Proficiency with Google Sheets/Excel and basic data analysis techniques Strong attention to detail, communication, and teamwork skills Comfortable working in a fast-paced manufacturing environment Preferred: Experience with visually critical characteristics such as color consistency Exposure to quality audits, feedback loops, or process verification activities Familiarity with ISO standards or retail/consumer product compliance Experience in wholesale, retail, or direct-to-consumer manufacturing environments' Compensation: $69,000-80,000 annual salary range (depending on location and experience) An annual bonus percentage that varies based on level of role Employer matching (up to 3% of base salary) for company sponsored 401k plan At Ruggable, we offer competitive compensation and benefits packages. Ruggable is an Equal Employment Opportunity employer. We proudly recruit and hire a diverse workforce and are committed to creating an inclusive environment for all employees. If you are based in California, we encourage you to read this important information for California residents linked here. To all recruitment agencies: Ruggable does not accept unsolicited agency resumes. Please do not forward resumes to our jobs alias, Ruggable employees or any other company destination. Ruggable is not responsible for any fees related to unsolicited resumes.

About Harbinger Harbinger is an American commercial electric vehicle (EV) company on a mission to transform an industry starving for innovation. Harbinger's best-in-class team of EV, battery, and drivetrain experts have pooled their deep experience to bring a first-of-its-kind EV platform to support the growing demand for medium-duty EVs and Hybrids. Harbinger: Familiar Form, Revolutionary Foundation. Job Overview: As a Metrology Quality Technician, you will play a crucial role in ensuring the quality and reliability of our EV platform. You will be responsible for conducting thorough inspections, implementing quality control measures, and collaborating with cross-functional teams to maintain and improve our production standards. You may also be required to maintain calibrated test equipment, prepare test data, and identify areas for quality control improvement. What You'll Do: * Develop and implement new programs on PC-DMIS or Polyworks, and Romer Arm to accurately measure parts in accordance with drawing specifications. * Collaborate closely with Quality Engineers to strategize and design programs to meet our production requirements. * Conduct dimensional inspections on parts and assemblies using portable CMM and precision gauges such as micrometers, calipers, and height gauges. * Perform visual inspections of products in line with established procedures. * Execute first piece inspections and monitor quality throughout the production process. * Support the production and supplier quality teams with PPAP projects to ensure compliance and quality standards. * Advocate for safety in all aspects of your work. Who You Are: * Have a strong background in using precision measuring tools and equipment. * Skilled at reading and understanding engineering drawings, standards, and procedures. * Experienced in programming and operating Portable CMMs. * Able to read and interpret drawings and specifications according to ASME Y 14.5 standards. * Practical experience in conducting both in-process and final inspections. * Familiar with a variety of mechanical inspection tools like micrometers and calipers. * Committed to maintaining accuracy and attention to detail while completing tasks efficiently. * Knowledgeable about dimensional, visual, and mechanical inspection processes. * Comfortable using Google Sheets and Docs for reporting. * Capable of working independently and making smart decisions based on general guidance. * Enjoy collaborating with team members to achieve common goals. Minimum Qualifications: * High school diploma or GED. * Minimum 3 years of experience programming/operating CMMs and performing inspections using hand gauges. * PC-DMIS/Polyworks training certificate is a plus. California Pay Range $30 - $40 USD Equal Opportunity Harbinger is an equal opportunity employer and complies with all applicable federal, state, and local fair employment practices laws. All qualified applicants will receive consideration for employment without regard to race, color, religion, national origin, ancestry, sex, sexual orientation, gender, gender expression, gender identity, genetic information or characteristics, physical or mental disability, marital/domestic partner status, age, military/veteran status, medical condition, or any other characteristic protected by law. Harbinger is committed to ensuring that our hiring process is accessible for persons with disabilities. If you have a disability or limitation, such as those covered by the Americans with Disabilities Act, that requires accommodations to assist you in the search and application process, please email us at ************************. Candidate Data Privacy Harbinger may collect, use and disclose your personal information or personal data (within the meaning of the applicable data protection laws) when you apply for employment and/or participate in our recruitment processes ("Candidate Personal Data"). This data includes contact, demographic, communications, educational, professional, employment, social media/website, network/device, recruiting system usage/interaction, security and preference information. Harbinger may use your Candidate Personal Data for the purposes of (i) tracking interactions with our recruiting system; (ii) carrying out, analyzing and improving our application and recruitment process, including assessing you and your application and conducting employment, background and reference checks; (iii) establishing an employment relationship or entering into an employment contract with you; (iv) complying with our legal, regulatory and corporate governance obligations; (v) recordkeeping; (vi) ensuring network and information security and preventing fraud; and (vii) as otherwise required or permitted by applicable law. Harbinger may share your Candidate Personal Data with (i) internal personnel who have a need to know such information in order to perform their duties, including individuals on our HR, legal, and finance teams, and the team(s) with the position(s) for which you are applying; (ii) Harbinger affiliates; and (iii) Harbinger's service providers, including providers of background checks, staffing services, and cloud services. Harbinger may transfer or store internationally your Candidate Personal Data, including to or in the United States, Canada, the United Kingdom, and the European Union and in the cloud, and this data may be subject to the laws and accessible to the courts, law enforcement and national security authorities of such jurisdictions. Please note that we are currently not accepting applications from third party application services. Any unsolicited resumes or candidate profiles submitted in response to our job posting shall be considered the property of Harbinger and are not subject to payment of referral or placement fees if any such candidate is later hired by Harbinger unless you have a signed written agreement in place with us which covers the applicable job posting.

Eleven Recruiting is searching for three Quality Technicians for one of our largest aerospace manufacturing clients sitting onsite in Simi Valley, CA. This role will play a pivotal role in ensuring adherence to quality standards and specifications of incoming products, materials, and components. Responsible for conducting thorough examinations, quality control inspections, and providing detailed analysis to support Supplier Quality Engineering functions. This position supports the Material Review Board (MRB) processes and collaborates closely with Supplier Quality Engineers to uphold superior quality across all stages of the production process. Job Responsibilities: Conduct comprehensive examinations and quality control inspections on non-conforming products, materials, and components for both standard and specialized products, ensuring alignment with established quality standards. Provide in-depth analysis, troubleshooting, and evaluation of components and assemblies, generating quality notifications for the Material Review Board (MRB) as necessary. Maintain meticulous documentation records and data related to performed tests, ensuring accuracy and accessibility. Collaborate with Supplier Quality Engineers to review quality notifications, determine the issuance of supplier corrective actions, and contribute to continuous improvement initiatives. Support Supplier Quality Engineers in conducting supplier audits to assess and enhance supplier quality performance. Update, refine, and create work inspections and supplier quality to ensure compliance with evolving standards and best practices. Perform other duties as assigned to support the smooth functioning of supplier quality operations. Job Requirements: Education: High School Diploma Certifications: AS9100 Lead Auditor - preferred Experience: 4+ years of hands-on experience in quality control inspections and related functions within a manufacturing or similar environment. Skills: Proficiency in conducting examinations and quality control inspections across various types of products, materials, and components. Able to apply a systematic QA approach while using existing procedures to solve a range of technical issues Performs routine quality inspections on engineering designs, assemblies, piece parts, final assemblies and tooling Conducts Internal audits and corrective action follow-ups Experience interpreting blueprints, drawings, and parts lists to ensure compliance with specifications. Proficient computer skills for documentation, data management, and report generation. #LI-BP1 #LI-Onsite Seniority Level: Mid-level Salary: $60,000-75,000 Job Function: Quality Technician Industry: Aerospace Manufacturing Employment Type: Full-Time Location: Simi Valley, CA

Description: California Faucets is looking for talented 2nd Shift Quality Technician I, to focus on quality and deliver on performance expectations. This role is based on site in our Huntington Beach, CA facility. The hours for this position will be Monday through Friday, full- time from 2:15pm - 11:00pm. The Quality Technician I is an entry level quality role responsible for performing product and process inspections, conducting routine testing, supporting nonconformance investigations, and ensuring compliance with internal quality standards and customer requirements. This position works under moderate supervision. The Quality Technician I will: Perform and document component parts inspection including cosmetic, mechanical and functional inspections. Perform and document incoming inspections, providing feedback to the Incoming Material Inspector or Quality Technician II/III. Perform and document Extra QC inspections on internally assembled products prior to shipping. Perform QC related tasks during the Repair process. Assist QC Technician II/III with troubleshooting and tasks related to production build issues. Inspect and document warranty returns (RMAs). Utilize basic hand tools such as calipers, micrometers, and ring & plug gauges to accurately complete various levels of inspection. Review engineering drawings and technical documents to ensure specifications are followed and appropriate materials are used. Monitor scrap collection in QC area and communicate any deviations from the approved processes. Communicate Quality issues to Production and Quality Management. Ensure all inspection tools used have a calibration sticker and calibration is not expired. Ensure that nonconforming parts and items are physically quarantined in the MRB area. Complete necessary documentation to fulfill customer and quality requirements. Support internal and external Quality audits. Ensure all applicable ERP system transactions are complete and documented. Follow all applicable safety requirements. Perform other duties as necessary. Please note that this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Requirements: The Following Personal Attributes/Skills are Required: Ability to read, write, speak, and understand English at a functional level (clear communication, good comprehension, and basic reporting skills). Ability to communicate inspection results and escalate Quality concerns to the appropriate personnel. The ability to work effectively with co-workers. Ability to work with a cross-functional team to enhance our quality systems. Basic understanding of blueprints and drawings (dimensions, tolerances) Ability to work overtime as needed. Ability to discern colors, textures, and fine visual details. Environmental and Safety Considerations: Possible exposure to heat, cold, dust, and moderate noise when working indoors. May be required to work with power tools and forced air. Supervisory Responsibilities: This position has no supervisory responsibilities. People Interface: The position requires contact both within the department and between departments on routine matters. Will work closely with QC Technician II/III and Incoming Material Inspection. Decision Making: Limited to immediate containment and reporting. The position has the authority to monitor, inspect, test, and document findings while ensuring that products comply with existing quality control standards and specifications. Supervision Received: Under general supervision of the Quality Control Manager and the mentorship of the QC Technician II/III, assignments are both task-oriented and objective-oriented. Follows established procedures for routine work; receives specific instruction on non-routine problems. Accountabilities: After adequate training, the position requires a level of accountability to complete a pre-determined amount of work per shift. Education and Experience: At least 1 year of hands-on inspection experience, ideally in a directly related industry (i.e. high-end custom-building products, industrial pumps, valves, threaded products, fabricated luxury products, etc.) Mechanical inspection experience, including methods, practices and tools. Decorative plating inspection experience preferred. Knowledge and hands-on experience working with various inspection tools (e.g. calipers, thread gages, micrometers, etc.). Moderate computer skills, including ERP experience. Good documentation skills. Working knowledge of Microsoft Word, Excel, Outlook and Teams. Physical Requirements: The physical demands described herein are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to walk and use hands to finger. The employee is frequently required to stand extended periods of time; reach with hands and arms below and above shoulder; climb or balance, stoop, kneel, crouch, and/or twist. The employee will be required to lift/carry 1-50 pounds routinely.

Job Description Quality Control focuses on process control and providing accurate feedback to internal customers. Responsible for the effective management and/or day-to-day supervision of quality control and inspection. Responsible for following implemented standards, methods and procedures for inspecting, testing and evaluating the precision, accuracy, efficacy and reliability of products. Responsible for usage of software, hardware, materials, parts, and products to ensure adherence to established standards of quality. Responsible for defined product sampling and checks for non-conformity. Executes required inspections defined by sampling plans for product conformity with a focus on Customer satisfaction. Essential Duties and Responsibilities include, but are not limited to: • Inspect parts to ensure conformity to the customer requirement and to industry standards. These inspections include dimensional, visual, material handling, workmanship, paint applications, free of all FOD • Utilize various measuring tools, which may include manual measuring instruments, CMMs, mylars, visual measuring systems, etc. • Prepare, update, and inspect Company and Customer inspection records for accuracy, communicating as needed, clearly and concisely. • Actively contributes to a culture of continuous improvement • Other duties as assigned Qualifications: Experience and Education: 5 - 6 years of relevant experience High school degree or equivalent, plus advanced training Technical Skills: Excellent attention to detail Working knowledge of customer specifications and requirements Basic computer skills Problem solving abilities Strong verbal and written communication skills Ability to use measuring equipment Ability to work both individually and in a team environment Understand and obey safety requirements Commitment to keep work area clean and free of debris Physical Requirements: Must be able to lift and/or move up to 50lbs Specific vision abilities include close and distance vision, depth perception and ability to adjust focus Ability to use hands to finger, handle, or feel, as well as reach with hands and arms for extended periods of time o Capable of standing for long periods Supervisory Responsibilities: None. Travel Required: N/A

Quality Control focuses on process control and providing accurate feedback to internal customers. Responsible for the effective management and/or day-to-day supervision of quality control and inspection. Responsible for following implemented standards, methods and procedures for inspecting, testing and evaluating the precision, accuracy, efficacy and reliability of products. Responsible for usage of software, hardware, materials, parts, and products to ensure adherence to established standards of quality. Responsible for defined product sampling and checks for non-conformity. Executes required inspections defined by sampling plans for product conformity with a focus on Customer satisfaction. Essential Duties and Responsibilities include, but are not limited to: • Inspect parts to ensure conformity to the customer requirement and to industry standards. These inspections include dimensional, visual, material handling, workmanship, paint applications, free of all FOD • Utilize various measuring tools, which may include manual measuring instruments, CMMs, mylars, visual measuring systems, etc. • Prepare, update, and inspect Company and Customer inspection records for accuracy, communicating as needed, clearly and concisely. • Actively contributes to a culture of continuous improvement • Other duties as assigned Qualifications: Experience and Education: 5 - 6 years of relevant experience High school degree or equivalent, plus advanced training Technical Skills: Excellent attention to detail Working knowledge of customer specifications and requirements Basic computer skills Problem solving abilities Strong verbal and written communication skills Ability to use measuring equipment Ability to work both individually and in a team environment Understand and obey safety requirements Commitment to keep work area clean and free of debris Physical Requirements: Must be able to lift and/or move up to 50lbs Specific vision abilities include close and distance vision, depth perception and ability to adjust focus Ability to use hands to finger, handle, or feel, as well as reach with hands and arms for extended periods of time o Capable of standing for long periods Supervisory Responsibilities: None. Travel Required: N/A

Job Description Sunny Sky Products prides itself on our commitment and dedication to creating, manufacturing and delivering top quality products in the beverage industry. We have generated an extensive product portfolio that includes frozen dispensed beverages, cold dispensed, hot dispensed and beverage enhancers. We are seeking a proactive and detail-oriented QA Lead to join our team. In this critical role, you will ensure product quality, food safety, and regulatory compliance across our juice manufacturing facility and warehouses. Reporting directly to the QA Manager, you will take a hands-on approach in supporting daily operations, conducting audits, overseeing lab testing, and driving continuous improvement initiatives across multiple departments. The QA Lead plays a critical role in ensuring product quality, food safety, and regulatory compliance at our certified juice production facility and warehouses. Reporting to the QA Manager, this hands-on position supports daily operations, audits, lab testing, and continuous improvement initiatives across departments. Hours Full time job Monday- Friday 6am - 2:30pm Open availability for unexpected schedule changes as production may demand including weekends Salary $28.00 per hour Benefits Medical, Dental & Vision Coverage Life Insurance 10 Paid Holidays PTO - Vacation Time Sick Pay 401K Program Company STD & LTD (Short term & Long-term disability) Basic Life Insurance & AD&D Insurance Perfect Attendance Monthly Bonus Program up to $100.00 Employee Referral Bonus Program up to $500.00 Responsibilities Quality & Compliance Oversight Ensure production meets customer, regulatory, and certification standards. Support internal/external audits (GMP, organic, documentation, etc.). Monitor production and escalate quality/food safety issues. Verify CCPs, OPRPs, and PRPs; manage lab testing and quality data. Calibrate lab equipment and maintain records. Manage day to day personnel Facility Engagement Maintain strong floor presence for real-time quality and sanitation checks. Manage daily cross department engagement across warehouse, production, maintenance, and quality teams. Coordinate rework and product holds with production and QA teams. Uphold sanitation, safety, and audit-readiness standards. Training & Culture Lead and execute quality initiatives, as needed Foster a strong food safety culture through training and coaching. Assist with onboarding and GMP/hygiene training. Promote and model occupational safety practices. Required Skills/Abilities/Education Bachelor's degree in Food Science, Microbiology, or related field (or equivalent experience). 3+ years in food/beverage manufacturing (juice or liquid processing preferred). PCQI, Internal Auditor, or Food Defense certification preferred. Ability to lift up to 50 lbs. and stand for extended periods. Bilingual in English and Spanish is a plus. For more information about our company please visit our website at ************************ Sunny Sky Products is an equal-opportunity employer that is committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, or any other protected characteristic as outlined by federal, state, or local laws. This policy applies to all employment practices within our organization, including hiring, recruiting, promotion, termination, layoff, recall, leave of absence, compensation, benefits, training, and apprenticeship.

Honda Racing Corporation USA, a leader in motorsports racing, is seeking several highly organized and detailed oriented Engineers, Technicians and CNC programmer/machinist to joins its racing program in Santa Clarita, CA: Chassis Development Engineer: Test, modify, and evolve hardware systems on race cars and track-focused road cars. Validate durability and performance against technical targets. Report lessons learned and document failures; manage problem resolution. Analyze logged data to identify root causes and devise countermeasures. Collaborate with designers and manage 3rd parties for design changes. Execute testing of countermeasure parts and new vehicle hardware updates. Specify instrumentation, perform data analysis, and write development reports. Innovate new testing tools and methods for track and rig tests. Development Engineer: Create development plans for concepts and components. Oversee full product life cycle from concept to production. Execute required tests and validations to meet project goals. Quality Engineer: Quality Control: Develop inspection protocols, validate measurement equipment. New Product Introduction & Corrective Actions: Lead cross-functional troubleshooting. Non-Conformance Management: Review issues, manage tooling calibration. Advanced Product Quality Planning: Conduct first article inspections, process validation. Data Analysis & Continuous Improvement: Generate reports, plan Six Sigma activities. Engine Dyno Technician: Set up/install/remove engines in test cells, configure instrumentation. Execute dyno tests, maintain equipment, review data, and report issues. Automotive Mechanics/Technicians: Build/rebuild racing chassis and hybrid systems. Perform quality checks, assembly, teardown, and inspection. Train new associates and support race car performance objectives. CNC Programmer/Machinist: Program CNC machines using MasterCam for high-performance engine components. Design fixtures/tooling and manage CNC setup and operation.

The Quality Technician III supports the Quality Engineering group through processing First Article Inspection (FAI) and Part Approval Process, selective inspection, analysis and processing of internal Nonconformance Reporting (NC) material and other administrative and logistical support duties. Represents the Quality Department in witnessing and documenting UAV flight acceptance test activity. Position Responsibilities Processes inbound or outbound FAI and deliverable submissions accurately and timely including: receipt and analysis of parts and/or supporting documentation; completion of associated records and logs; communication of submission status as needed to QEs, managers, engineers or interested parties; processing of parts after completion; maintaining records and files associated with submissions; and other related tasks Conducts selective inspection under the direction of the QE group including: receipt and verification of material, completion and maintenance of related documentation, communication of inspection results to concerned parties and processing of material after verification using Agile/Oracle database Processes internal non-conforming material as needed in support of QE including: retrieval and analysis of material, interpretation of preliminary findings and restatement of problem statements to ensure understanding of problem, processing material through the necessary NC processes, communication of status to concerned parties, maintaining necessary documentation and processing material to internal and external suppliers Provides general support of QEs including communication, Corrective Action Request processing, product evaluation, and sorting activities under exceptional circumstances, and interfacing with other team members as necessary to complete assigned tasks in support of continuous improvement initiatives using A3, Six Sigma DMAIC forms Leads & facilitates problem solving activities such as Fishbone, 5-Why, Fault-tree, etc. Plans and coordinates QA Technician I and II activities and provides general guidance Support DCMA Source Inspection process Responsible for creating the Final Inspection documentation package including COC, TDR's, etc., and as necessary support internal/external customer inspection Represents and supports QEs during internal and 3rd party audits regarding the essential functions above and as needed regarding our measurements system and documented system Develops and maintains process instructions for quality-related activities Works on assignments that are moderately difficult, requiring judgement in resolving issues or in making recommendations Other duties as assigned Basic Qualifications (Required Skills & Experience) High School Diploma or GED equivalent 2 - 4 years of related work experience is required or equivalent combination of education, training, and experience Has Aerospace quality management system experience (AS9100DD) and/or internal audit experience Demonstrated expertise in mechanical inspection methods and skills including surface plate work, hand tools, and gages, etc. Solid ability to read and understand drawing requirements including a solid understanding of Geometric Dimensioning and Tolerance to ANSI Y14.5 Strong computer skills and is proficient in MS Office Suite (Word, Access, PowerPoint, Excel) Must be able to fill out the necessary flight test documentation Must document any/all non-conformances encountered Must have the skills necessary to perform pre and post-flight visual inspections on flight hardware and components Must possess the skills necessary to remove and replace field replaceable components on aircraft. Will populate excel spreadsheets on a daily basis documenting flight test results Must have a valid California driver's license and clean driving record Other Qualifications & Desired Competencies 2-year technical degree preferred; Quality system courses and/or equivalent experience preferred Must able to work efficiently in a fast-paced, high-volume environment Required to travel to and from remote flying sites on a daily basis Solid ability to accurately record and manage data, records, files and other documents to support tasks Good knowledge of FAI validation and verification process requirements Good knowledge of engineering drawings and specification systems Has an analytical approach to problem solving and high organizational skills in a fast-paced environment as well as effective time management, interpersonal and communication skills Strong ability to manage time and prioritize tasks Receives little instruction on daily work, general instructions on newly introduced assignments. Has substantial understanding of the job and applies knowledge & skills to complete wide range of tasks Able to excel in a fast-paced, deadline-driven environment, where small teams share a broad variety of duties Displays strong initiative and drive to accomplish goals and meet company objectives Takes ownership and responsibility for current and past work products Is committed to learning from mistakes and driven to improve and enhance performance of oneself, others, and the company Has effective problem-solving, analytical, interpersonal and communication skills. Focuses on teamwork, collaboration and puts the success of the team above one's own interests Willingness to work overtime also a must Physical Demands Ability to work the majority of the time outdoors in varying weather conditions, when needed, during flight test activity (Frequent) Ability to lift up to 50 lbs. and carry/move objects of varying shapes and sizes (Frequent) Regularly required to, stand, sit; talk, hear, and use hands and fingers to operate a computer and telephone keyboard (Frequent) Clearance Level Clearance Level The salary range for this role is: $26 - $37 AeroVironment considers several factors when extending an offer, including but not limited to, the location, the role and associated responsibilities, a candidate's work experience, education/training, and key skills. ITAR Requirement: T his position requires access to information that is subject to compliance with the International Traffic Arms Regulations (“ITAR”) and/or the Export Administration Regulations (“EAR”). In order to comply with the requirements of the ITAR and/or the EAR, applicants must qualify as a U.S. person under the ITAR and the EAR, or a person to be approved for an export license by the governing agency whose technology comes under its jurisdiction. Please understand that any job offer that requires approval of an export license will be conditional on AeroVironment's determination that it will be able to obtain an export license in a time frame consistent with AeroVironment's business requirements. A “U.S. person” according to the ITAR definition is a U.S. citizen, U.S. lawful permanent resident (green card holder), or protected individual such as a refugee or asylee. See 22 CFR § 120.15. Some positions will require current U.S. Citizenship due to contract requirements. Benefits: AV offers an excellent benefits package including medical, dental vision, 401K with company matching, a 9/80 work schedule and a paid holiday shutdown. For more information about our company benefit offerings please visit: ********************************** We also encourage you to review our company website at ******************** to learn more about us. Principals only need apply. NO agencies please. Who We Are Based in California, AeroVironment (AVAV) is a global leader in unmanned aircraft systems (UAS) and tactical missile systems. Founded in 1971 by celebrated physicist and engineer, Dr. Paul MacCready, we've been at the leading edge of technical innovation for more than 45 years. Be a part of the team that developed the world's most widely used military drones and created the first submarine-launched reconnaissance drone, and has seven innovative vehicles that are part of the Smithsonian Institution's permanent collection in Washington, DC. Join us today in developing the next generation of small UAS and tactical missile systems that will deliver more actionable intelligence to our customers so they can proceed with certainty - and succeed. What We Do Building on a history of technological innovation, AeroVironment designs, develops, produces, and supports an advanced portfolio of unmanned aircraft systems (UAS) and tactical missile systems. Agencies of the U.S. Department of Defense and allied military services use the company's hand-launched UAS to provide situational awareness to tactical operating units through real-time, airborne reconnaissance, surveillance, and target acquisition. We are proud to be an EEO/AA Equal Opportunity Employer, including disability/veterans. AeroVironment, Inc. is an Equal Employment Opportunity (EEO) employer and welcomes all qualified applicants. Qualified applicants will receive fair and impartial consideration without regard to race, sex, color, religion, national origin, age, disability, protected veteran status, genetic data, sexual orientation, gender identity or other legally protected status. ITAR U.S. Citizen, U.S. Permanent Resident (Green Card holder), asylee/refugee status as defined by 8 U.S.C. 1324b(a)(3) or a person approved for an export license from the appropriate governing agency.

Ruggable is a leading direct-to-consumer e-commerce brand based in Los Angeles, California with an extraordinary track record of high, profitable growth. We pride ourselves on having an extremely loyal customer base and a talented team made up of genuinely caring people who take action and deliver results. We are venture-backed and own a patented washable rug design that's disrupting the home décor industry. Our mission is to empower our customers to live vibrantly with beautiful products that don't compromise on function. If you're passionate about consumer products, e-commerce, and high-growth start-ups, keep reading! Please note, this role is onsite five days a week, Monday through Friday, 7-4 or 8-5 pm. Job Summary: We are seeking a Quality Technician to support our daily manufacturing operations. This role helps ensure every product meets our quality standards by supporting the systems that keep our output consistent for customers. The Quality Technician will work closely with on-site Quality, Production, and Engineering teams to identify issues, assist with corrective actions, and reduce variation in our processes. This position plays a key role in maintaining reliable, repeatable production and ensuring compliance with both customer and internal standards. What You'll Do: * Perform routine quality checks, measurements, and visual inspections to ensure products create exceptional experiences for our customers * Support on-site manufacturing quality process control activities and maintain accurate documentation * Assist in maintaining quality records, equipment logs, and inspection documentation to support consistent production and compliance * Work directly with local Production, QA, and Engineering teams to provide data and observations during root cause analysis (RCA/CAPA) efforts * Monitor visual and dimensional product characteristics, especially color consistency, and promptly communicate discrepancies to supervisors * Collect, organize, and report quality and process data for trend analysis and continuous improvement What You'll Need to Have: Required: * Associate degree in a technical field or equivalent hands-on experience in quality * 0-1 years of experience in a production, quality, or manufacturing support role * Working knowledge of basic quality tools (control charts, check sheets, 5 Whys, basic FMEA concepts) * Ability to perform accurate measurements, visual inspections, and data collection * Proficiency with Google Sheets/Excel and basic data analysis techniques * Strong attention to detail, communication, and teamwork skills * Comfortable working in a fast-paced manufacturing environment Preferred: * Experience with visually critical characteristics such as color consistency * Exposure to quality audits, feedback loops, or process verification activities * Familiarity with ISO standards or retail/consumer product compliance * Experience in wholesale, retail, or direct-to-consumer manufacturing environments' Compensation: * $69,000-80,000 annual salary range (depending on location and experience) * An annual bonus percentage that varies based on level of role * Employer matching (up to 3% of base salary) for company sponsored 401k plan At Ruggable, we offer competitive compensation and benefits packages. Ruggable is an Equal Employment Opportunity employer. We proudly recruit and hire a diverse workforce and are committed to creating an inclusive environment for all employees. If you are based in California, we encourage you to read this important information for California residents linked here. To all recruitment agencies: Ruggable does not accept unsolicited agency resumes. Please do not forward resumes to our jobs alias, Ruggable employees or any other company destination. Ruggable is not responsible for any fees related to unsolicited resumes.

About Harbinger Harbinger is an American commercial electric vehicle (EV) company on a mission to transform an industry starving for innovation. Harbinger's best-in-class team of EV, battery, and drivetrain experts have pooled their deep experience to bring a first-of-its-kind EV platform to support the growing demand for medium-duty EVs and Hybrids. Harbinger: Familiar Form, Revolutionary Foundation. Job Overview As a Quality Technician, GA/Chassis, you will play a crucial role in ensuring the quality and reliability of our EV platform. You will be responsible for conducting thorough inspections, implementing quality control measures, and collaborating with cross-functional teams to maintain and improve our production standards. You may also be required to maintain calibrated test equipment, prepare test data, and identify areas for quality control improvement. What You'll Do: Inspection and Testing: Conduct detailed inspections of automotive components and finished products to ensure compliance with quality standards and specifications Quality Control: Implement and maintain quality control processes throughout the production cycle Continuous Improvement: Actively participate in root cause analysis and corrective action initiatives to address quality issues and prevent recurrence Collaboration: Work closely with production teams, engineers, and other stakeholders to communicate quality standards and expectations Training and Development: Provide training to production staff on quality control procedures and best practices Who You Are: High school diploma required (College degree or equivalent preferred but not required) 2 or more years of experience in a Manufacturing, Quality, or Process focused role Strong mechanical aptitude and trouble-shooting skills Excellent attention to detail and analytical skills Effective communication and collaboration skills Strong understanding of chassis or automotive assembly is preferred California Pay Range $25-$32 USD Equal Opportunity Harbinger is an equal opportunity employer and complies with all applicable federal, state, and local fair employment practices laws. All qualified applicants will receive consideration for employment without regard to race, color, religion, national origin, ancestry, sex, sexual orientation, gender, gender expression, gender identity, genetic information or characteristics, physical or mental disability, marital/domestic partner status, age, military/veteran status, medical condition, or any other characteristic protected by law. Harbinger is committed to ensuring that our hiring process is accessible for persons with disabilities. If you have a disability or limitation, such as those covered by the Americans with Disabilities Act, that requires accommodations to assist you in the search and application process, please email us at ************************. Candidate Data Privacy Harbinger may collect, use and disclose your personal information or personal data (within the meaning of the applicable data protection laws) when you apply for employment and/or participate in our recruitment processes (“Candidate Personal Data”). This data includes contact, demographic, communications, educational, professional, employment, social media/website, network/device, recruiting system usage/interaction, security and preference information. Harbinger may use your Candidate Personal Data for the purposes of (i) tracking interactions with our recruiting system; (ii) carrying out, analyzing and improving our application and recruitment process, including assessing you and your application and conducting employment, background and reference checks; (iii) establishing an employment relationship or entering into an employment contract with you; (iv) complying with our legal, regulatory and corporate governance obligations; (v) recordkeeping; (vi) ensuring network and information security and preventing fraud; and (vii) as otherwise required or permitted by applicable law. Harbinger may share your Candidate Personal Data with (i) internal personnel who have a need to know such information in order to perform their duties, including individuals on our HR, legal, and finance teams, and the team(s) with the position(s) for which you are applying; (ii) Harbinger affiliates; and (iii) Harbinger's service providers, including providers of background checks, staffing services, and cloud services. Harbinger may transfer or store internationally your Candidate Personal Data, including to or in the United States, Canada, the United Kingdom, and the European Union and in the cloud, and this data may be subject to the laws and accessible to the courts, law enforcement and national security authorities of such jurisdictions. Please note that we are currently not accepting applications from third party application services. Any unsolicited resumes or candidate profiles submitted in response to our job posting shall be considered the property of Harbinger and are not subject to payment of referral or placement fees if any such candidate is later hired by Harbinger unless you have a signed written agreement in place with us which covers the applicable job posting.

California Faucets is looking for talented 2nd Shift Quality Technician I, to focus on quality and deliver on performance expectations. This role is based on site in our Huntington Beach, CA facility. The hours for this position will be Monday through Friday, full- time from 2:15pm - 11:00pm. The Quality Technician I is an entry level quality role responsible for performing product and process inspections, conducting routine testing, supporting nonconformance investigations, and ensuring compliance with internal quality standards and customer requirements. This position works under moderate supervision. The Quality Technician I will: Perform and document component parts inspection including cosmetic, mechanical and functional inspections. Perform and document incoming inspections, providing feedback to the Incoming Material Inspector or Quality Technician II/III. Perform and document Extra QC inspections on internally assembled products prior to shipping. Perform QC related tasks during the Repair process. Assist QC Technician II/III with troubleshooting and tasks related to production build issues. Inspect and document warranty returns (RMAs). Utilize basic hand tools such as calipers, micrometers, and ring & plug gauges to accurately complete various levels of inspection. Review engineering drawings and technical documents to ensure specifications are followed and appropriate materials are used. Monitor scrap collection in QC area and communicate any deviations from the approved processes. Communicate Quality issues to Production and Quality Management. Ensure all inspection tools used have a calibration sticker and calibration is not expired. Ensure that nonconforming parts and items are physically quarantined in the MRB area. Complete necessary documentation to fulfill customer and quality requirements. Support internal and external Quality audits. Ensure all applicable ERP system transactions are complete and documented. Follow all applicable safety requirements. Perform other duties as necessary. Please note that this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Requirements The Following Personal Attributes/Skills are Required: Ability to read, write, speak, and understand English at a functional level (clear communication, good comprehension, and basic reporting skills). Ability to communicate inspection results and escalate Quality concerns to the appropriate personnel. The ability to work effectively with co-workers. Ability to work with a cross-functional team to enhance our quality systems. Basic understanding of blueprints and drawings (dimensions, tolerances) Ability to work overtime as needed. Ability to discern colors, textures, and fine visual details. Environmental and Safety Considerations: Possible exposure to heat, cold, dust, and moderate noise when working indoors. May be required to work with power tools and forced air. Supervisory Responsibilities: This position has no supervisory responsibilities. People Interface: The position requires contact both within the department and between departments on routine matters. Will work closely with QC Technician II/III and Incoming Material Inspection. Decision Making: Limited to immediate containment and reporting. The position has the authority to monitor, inspect, test, and document findings while ensuring that products comply with existing quality control standards and specifications. Supervision Received: Under general supervision of the Quality Control Manager and the mentorship of the QC Technician II/III, assignments are both task-oriented and objective-oriented. Follows established procedures for routine work; receives specific instruction on non-routine problems. Accountabilities: After adequate training, the position requires a level of accountability to complete a pre-determined amount of work per shift. Education and Experience: At least 1 year of hands-on inspection experience, ideally in a directly related industry (i.e. high-end custom-building products, industrial pumps, valves, threaded products, fabricated luxury products, etc.) Mechanical inspection experience, including methods, practices and tools. Decorative plating inspection experience preferred. Knowledge and hands-on experience working with various inspection tools (e.g. calipers, thread gages, micrometers, etc.). Moderate computer skills, including ERP experience. Good documentation skills. Working knowledge of Microsoft Word, Excel, Outlook and Teams. Physical Requirements: The physical demands described herein are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to walk and use hands to finger. The employee is frequently required to stand extended periods of time; reach with hands and arms below and above shoulder; climb or balance, stoop, kneel, crouch, and/or twist. The employee will be required to lift/carry 1-50 pounds routinely. Salary Description $21.00 -$23.00/hr.

About Harbinger Harbinger is an American commercial electric vehicle (EV) company on a mission to transform an industry starving for innovation. Harbinger's best-in-class team of EV, battery, and drivetrain experts have pooled their deep experience to bring a first-of-its-kind EV platform to support the growing demand for medium-duty EVs and Hybrids. Harbinger: Familiar Form, Revolutionary Foundation. Job Overview: As a Quality Technician, you will play a crucial role in ensuring the quality and reliability of our EV platform. You will be responsible for conducting thorough inspections, implementing quality control measures, and collaborating with cross-functional teams to maintain and improve our production standards. You may also be required to maintain calibrated test equipment, prepare test data, and identify areas for quality control improvement. What You'll Do: Perform thorough evaluations of incoming materials, components, and finished products to detect defects, discrepancies, and deviations from established quality standards. Ensure precise record-keeping of inspection results, including photographs and detailed reports. Work with the quality control team to address material quality concerns and decide on appropriate dispositions (accept, reject, or rework). Collaborate with production and quality teams to analyze the root causes of defects and non-conformities, and propose process improvements. Engage in continuous improvement initiatives aimed at boosting product quality and operational efficiency. Partner with cross-functional teams, including manufacturing, quality, and engineering, to swiftly address incoming material challenges. Advocate for safety in all aspects of your work. Who You Are: Skilled at reading and understanding engineering drawings, standards, and procedures. Able to read and interpret drawings and specifications according to ASME Y 14.5 standards. Experience working with ERP or MRP systems. Practical experience in performing both in-process and final inspections. Proficient in using a range of mechanical and electrical inspection tools, including calipers, micrometers, multi-meters, surface plates, height gauges, comparators, gauge blocks, and thread gauges. Committed to maintaining accuracy and attention to detail while completing tasks efficiently. Knowledgeable about dimensional, visual, and mechanical inspection processes. Comfortable using Google Sheets and Docs for reporting. Capable of working independently and making smart decisions based on general guidance. Enjoy collaborating with team members to achieve common goals. Minimum Qualifications: High school diploma or GED. Minimum 3 years of experience working in Quality Inspection roles. Experience in MRB is a plus. California Pay Range $25 - $32 USD Equal Opportunity Harbinger is an equal opportunity employer and complies with all applicable federal, state, and local fair employment practices laws. All qualified applicants will receive consideration for employment without regard to race, color, religion, national origin, ancestry, sex, sexual orientation, gender, gender expression, gender identity, genetic information or characteristics, physical or mental disability, marital/domestic partner status, age, military/veteran status, medical condition, or any other characteristic protected by law. Harbinger is committed to ensuring that our hiring process is accessible for persons with disabilities. If you have a disability or limitation, such as those covered by the Americans with Disabilities Act, that requires accommodations to assist you in the search and application process, please email us at ************************. Candidate Data Privacy Harbinger may collect, use and disclose your personal information or personal data (within the meaning of the applicable data protection laws) when you apply for employment and/or participate in our recruitment processes (“Candidate Personal Data”). This data includes contact, demographic, communications, educational, professional, employment, social media/website, network/device, recruiting system usage/interaction, security and preference information. Harbinger may use your Candidate Personal Data for the purposes of (i) tracking interactions with our recruiting system; (ii) carrying out, analyzing and improving our application and recruitment process, including assessing you and your application and conducting employment, background and reference checks; (iii) establishing an employment relationship or entering into an employment contract with you; (iv) complying with our legal, regulatory and corporate governance obligations; (v) recordkeeping; (vi) ensuring network and information security and preventing fraud; and (vii) as otherwise required or permitted by applicable law. Harbinger may share your Candidate Personal Data with (i) internal personnel who have a need to know such information in order to perform their duties, including individuals on our HR, legal, and finance teams, and the team(s) with the position(s) for which you are applying; (ii) Harbinger affiliates; and (iii) Harbinger's service providers, including providers of background checks, staffing services, and cloud services. Harbinger may transfer or store internationally your Candidate Personal Data, including to or in the United States, Canada, the United Kingdom, and the European Union and in the cloud, and this data may be subject to the laws and accessible to the courts, law enforcement and national security authorities of such jurisdictions. Please note that we are currently not accepting applications from third party application services. Any unsolicited resumes or candidate profiles submitted in response to our job posting shall be considered the property of Harbinger and are not subject to payment of referral or placement fees if any such candidate is later hired by Harbinger unless you have a signed written agreement in place with us which covers the applicable job posting.