Quality control analyst jobs in Oklahoma

Allient Inc. is in growth mode and currently seeking a Quality Control Technician to join our team in Tulsa, Oklahoma! The Quality Control Technician performs inspections, checks, tests, and samplings on all incoming materials, parts and components used in the manufacturing of products provided by our company. Responsibilities: * Performs inspections of purchased parts, subassemblies and finished goods (including FAIs) according to well defined criteria using standard physical, mechanical, and/or electrical measurements. * Inspects, reworks, or rejects subassemblies or finished products as required. * Conducts and documents process and system audits using written procedures as audit standards. * Accurately documents the results of each inspection and testing. * Coordinates and/or performs calibration of test equipment and fixtures. * Reads and interprets engineering drawings and material specifications. * Maintains detailed records describing and verifying completion of all required quality inspections. Minimum Qualifications: * Associate's Degree in engineering or a technical discipline. In lieu of a degree, equivalent number years of experience is required. * 0- 2 years of related experience required. * Knowledge of dimensional metrology, along with the technical skills to perform basic mechanical inspection and gauging operations. Basic understanding of GD&T (ASME Y14.5) a plus. * Solid computer skills include MS Office Physical Demands: * Good manual dexterity and eye/hand coordination. * Required to stand, walk, and sit and requires some lifting in excess of 25 pounds. * May use manufacturing equipment and machines that requires personal protective equipment Work Environment: * This position operates in both the office environment as well as the production floor. * While on the production floor, employee may be subjected to moving mechanical parts and may be required to put on precautionary, protective wear such as goggles. * Some travel may be required. To learn more about Allient, visit our website at *************** * Allient Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.

Join a company where you can make a difference from day one and help make the world a better and safer place. ARL Bio Pharma provides analytical and microbiological testing for the pharmaceutical industry. Our laboratory works with pharmaceutical companies, compounding and hospital pharmacies, drug manufacturers, and raw material suppliers bringing excellence to pharmaceutical sciences and making pharmaceuticals safer. With moderate guidance, the Data Review Chemist I is responsible for utilizing the Quality Management System (QMS) standard operating procedures (SOP) and work instructions (WI) to perform quality review and approval of test results and data for compliance. The Data Review Chemist II will independently apply technical aptitude and experience to troubleshoot non-compliant data and work supportively with other Chemists to ensure generation of compliant data. Some highlights... Nice variety of work projects Generous Paid Time Off 100% Company-paid Medical, Dental and Vision Insurance 401K Retirement with Company Match Work in a comfortable office setting with casual dress code Have your own workspace where you can work largely independently This is a full-time role with a great benefits package Work Schedule: Monday - Friday, 11:00 am - 7:30 pm. Work Restrictions: Because of vital nature of this work, we do not allow medical marijuana cards and we do random drug testing on all of our employees. Essential Functions... Ensure adhere to QMS documentation by reviewing, providing oversight and corrective direction to laboratory chemists Review chromatography data for compliance with QMS Position Requirements... An AS in chemistry or related science with 4+ years industrial experience OR A BS in chemistry or related science with 2+ years industrial experience OR PhD in chemistry or related science with 0-2 years industrial experience Bachelor's degree in chemistry or related science field with 2+ years' experience in the Pharmaceutical Industry is preferred Work Environment... This job operates in a laboratory environment. Attendance at the office is required. While performing the duties of the job the employee can be exposed to toxic or hazardous chemicals. The employee will be required to wear all appropriate safety equipment including but not limited to eye protection, gloves, and lab coat. This role frequently uses standard office equipment such as computers, phones, photocopiers, filing cabinets and fax machines. Physical Demands... The role requires sitting for prolonged periods of time; ability to see in the normal visual range including the ability to distinguish colors and shades and hear in the normal audio range with or without correction and hand-eye coordination and manual dexterity sufficient to operate a keyboard, photocopier, telephone, calculator, and other office equipment. AAP/EEO Statement ARL Bio Pharma, Inc. provides equal employment opportunity to all individuals regardless of their race, color, creed, religion, gender, age, sexual orientation, gender identity, national origin, disability, veteran status, genetics or any other characteristic protected by state, federal, or local law. ARL Bio Pharma, Inc. expressly prohibits any form of workplace harassment based on race, color, creed, religion, gender, age, sexual orientation, gender identity, national origin, disability, veteran status, genetics or any other characteristic protected by state, federal, or local law. Improper interference with the ability of ARL Bio Pharma, Inc. employees to perform their job duties may result in discipline up to and including discharge. Further, the company takes affirmative action to ensure that applicants and employees are treated without regard to any of these characteristics.

Job Description Crusoe's mission is to accelerate the abundance of energy and intelligence. We're crafting the engine that powers a world where people can create ambitiously with AI - without sacrificing scale, speed, or sustainability. Be a part of the AI revolution with sustainable technology at Crusoe. Here, you'll drive meaningful innovation, make a tangible impact, and join a team that's setting the pace for responsible, transformative cloud infrastructure. About the Role: At Crusoe, we move fast and we build things. We are seeking a highly detail-oriented and precise Quality Assurance Technician - Electromechanical Installer to join our manufacturing team in Tulsa. This role is critical to the safety infrastructure of our electrical equipment, requiring absolute accuracy in the assembly and installation of complex mechanical safety interlock systems (Kirk Key). You will play a vital role in quality assurance, ensuring that safety components are installed correctly and function perfectly according to engineering diagrams. What You'll Be Working On: System Installation & Sequencing: Ensure the proper management and installation of complex mechanical safety interlock systems (Kirk Key). Blueprint Interpretation: Read and interpret mechanical and electrical manufacturing drawings and schematics to a competent level, ensuring components are installed in the correct order and sequence per documentation. Inventory & Verification: Maintain a detailed, accurate inventory of specific serialized components and verify that the correct serialized components are installed at the required steps. Functionality Testing: Follow detailed installation instructions and verify the proper functionality of all installed components before releasing the product to the next stage. Layout and Fabrication: Mechanically lay out and securely mount placards and identification plates onto panels according to drawings. Logistics Support: Perform other essential duties, including moving and staging of electrical cabinets as they move through the quality assurance area. Safety & Quality Adherence: Work diligently to meet and exceed accepted safety and quality standards in all tasks performed, utilizing appropriate Personal Protective Equipment (PPE). What You'll Bring to the Team: Assembly & Technical Fundamentals: Strong background in mechanical assembly and wiring fundamentals, with proficiency in using basic hand tools. Blueprint Expertise: Proven ability to read and interpret technical schematics and blueprints to a high level of accuracy. Accuracy and Detail: Exceptional Attention to Detail and Accuracy in execution and documentation. Safety and Quality Commitment: A strong commitment to Adherence to Safety and Quality Standards and protocols. Organization & Management: Demonstrated ability in Organization and Material Management, including creating clear and accurate labels for component identification. Communication: Effective communication skills for clear reporting and collaboration with team members and engineers. Safety & Compliance: This position is designated a safety-sensitive position and/or is located in a safety-sensitive facility. Drug and alcohol program participation is required. Must be able to pass a background check. Physical Requirements: Ability to stand, walk, stoop, and bend for extended periods (up to 8 hours or more daily) to perform assembly tasks. Requires constant use of arms, hands, fingers, eyes, legs, and back. Ability to regularly lift, lower, push, and pull materials up to 50 lbs. Benefits: Industry competitive pay Restricted Stock Units in a fast growing, well-funded technology company Health insurance package options that include HDHP and PPO, vision, and dental for you and your dependents Employer contributions to HSA accounts Paid Parental Leave Paid life insurance, short-term and long-term disability Teladoc 401(k) with a 100% match up to 4% of salary Generous paid time off and holiday schedule Cell phone reimbursement Tuition reimbursement Subscription to the Calm app MetLife Legal Company paid commuter benefit; $300 per month Compensation: Compensation will be paid in the range of $25 - $28/Hr + Bonus. Restricted Stock Units are included in all offers. Compensation to be determined by the applicant's education, experience, knowledge, skills, and abilities, as well as internal equity and alignment with market data. Crusoe is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, disability, genetic information, pregnancy, citizenship, marital status, sex/gender, sexual preference/ orientation, gender identity, age, veteran status, national origin, or any other status protected by law or regulation.

Chemical Service Technician at a Data Center-Tulsa Oklahoma A Water treatment Chemical Technician will be responsible for working at a customer's data center in the Tulsa, Oklahoma area. The Chemical Technician will solve customer water treatment concerns, perform extensive water treatment lab work, and troubleshoot water treatment and control equipment at a customer's massive data center. As a Chemical Service Technician, you will receive an industry competitive salary, expenses, and benefits. In addition, ample technical support is provided along with continuous training. Compensation is based upon experience and the ability to succeed. $55,000 to $70,000 first year base for a qualified candidate. Plus a year-end bonus! We hire with a focus that favors the committed employee both in terms of overall compensation and growth opportunities. We have designed our compensation package accordingly. Benefits include a corporate 401k, health, dental, vision, and life insurance. Garratt-Callahan (wwwgarrattcallahan.com) is family friendly, profitable, stable, and fiercely private. No layoffs in 120 years. No ownership change in 120 years. 80 straight years of profitability. We have operations from Asia, to the Caribbean, and in every state in the USA. Job Responsibilities: Solve customers' water problems. Treat industrial cooling towers to keep them energy efficient and environmentally friendly. Perform detailed water testing & analyses at a data center. Help deliver on customer KPIs and promote Garratt-Callahan solutions including proprietary chemical blends, equipment, & monitoring technology. Reports directly to the Site Manager. Keep our existing customers happy and safe. About Garratt-Callahan: Garratt-Callahan is a US based private 120 year old, nationwide water treatment chemical company. Garratt-Callahan *********************** treats industrial boilers and cooling towers to keep them energy efficient and environmentally friendly with one of the most advanced product lines in the industry. We are registered to ISO 9001:2015 and sell an industry leading line of “green" solutions, G-C GreenTech. We are headquartered in Burlingame, California. G-C is family owned, profitable, and expanding. We have five chemical plants in the USA, sales people in every state, and operations in Asia, the Pacific, and the Caribbean. Benefits: We offer a competitive benefit package which includes medical, dental, vision, AD&D, LT, and 401k. First year compensation $55,000 to $70,000 plus bonus, depending on experience. Car Allowance Advanced training, and a clear career path. Family friendly, flexible hours. A huge benefit of working for Garratt-Callahan is our stability and low turnover. No Layoffs in our 120-year history. G-C is a profitable company. The last year that G-C did not turn a profit was during World War 2. To Apply, please log on to : ************************************************************************************************************************ Id=19000101_000001&job Id=557126&source=CC2&lang=en_US Thank you for considering Garratt-Callahan Company. Garratt-Callahan is an EEO/AAE employer. Minorities, women, veterans and individuals with disabilities are encouraged to apply. Requirements : You will be a successful applicant if you have a technical degree in Chemistry, Chemical Engineering, Biology, Mechanical Engineering, Paper Science, or Water Resources. You must have a 4-year technical degree in the sciences to qualify for this position. A successful applicant must have experience or interest in learning advanced water treatment technologies. A successful applicant must be detail-oriented, adhere to safety protocols, and be able to lift 50 pounds wearing PPE in all weather conditions. One year technical sales, or an internship related to water treatment chemicals is preferred, but we are willing to train and mentor. Outside industrial sales experience is a plus. You must live in or near Tulsa, Oklahoma and be familiar with the industrial marketplace of the area. Additional Preferred Qualifications: • Familiarity With Industrial Cooling Towers • Knowledge and Proficiency with Lab Procedures, Water Equipment, & Water Chemistry • Ability to Provide Virtual Presentations to Group • Experience Working in a Team Setting as a Collaborative Partner NOTE : Garratt-Callahan does not sponsor work visas. No recruiters please. If you have a disability, and need assistance during the application and selection process as a result, please contact the Garratt-Callahan Human Resources department at ************. Arrangements can be made to provide an accommodation in order to assist you in applying for an open position using our on-line system, completing any other related paperwork, interviewing, or any other portion of the employment process. This phone number is only for disability assistance. When requesting an accommodation, please provide your name, phone, email address, or any other means of contacting you. Provide a brief description of the nature of the requested accommodation. A member of the Human Resources team will then contact you to discuss your request. A request for an accommodation will not affect your opportunities for employment with Garratt-Callahan. Garratt-Callahan values differing experiences, backgrounds and perspectives among our employees, and see them as a competitive advantage. Garratt-Callahan is committed to the fair and equal treatment of all associates and applicants. Garratt-Callahan is an equal opportunity employer that evaluates qualified applicants without regard to race, color, national origin, religion, sex, age, marital status, disability, veteran status, sexual orientation, gender identity, or any other characteristic protected by law. The “Equal Employment Opportunity is the Law” poster is available at: **************************************************************** Garratt-Callahan Company's reaffirmation of Equal Employment/Affirmative Action Statement ************************************************************************ Key Words: Chemistry, chemicals, scientific, science, salesperson, salesman, saleswoman, outside sales, technical sales, account representative, account executive, territory sales, territory manager, district sales, district manager, field engineer, field service, AE, sales engineer, data center, chemical engineer, chemist, mechanical engineer, biologist, biology, microbiology, nalco, ecolab, us water, Suez, ge water, chemtreat, veolia, solenis, chem-aqua, kurita, evoqua, fremont, water treatment, boilers, cooling towers, waste water, pumps, equipment, chillers, polymers, biocides, data center, Tulsa, Oklahoma, Pryor, Broken Arrow

** Kemp Quarries is a leading producer of construction aggregates, primarily crushed stone, sand and gravel. These materials are most often produced from natural deposits of limestone and river sand. Our mining process typically begins with drilling and blasting the rock into smaller pieces. The material goes through various stages of crushing and screening to produce the sizes and specifications desired by our customers. Our aggregates are used in different ways within the construction industry. As an associate member of the Oklahoma and Arkansas AGC chapters, we work closely with member contractors in providing materials to meet the most stringent needs and state certifications. ◾ As a base material underneath highways, walkways, airport runways, parking lots and railroads. ◾ To help aid in water filtration, purification and erosion control including Type I and Type II Rip Rap. ◾ Used as a raw material in combination with other resources to construct many of the items that we rely on daily. ◾ Houses and apartments; ◾ Roads, bridges and parking lots; ◾ Schools and hospitals; ◾ Commercial buildings and retail space; ◾ Sewer systems; and ◾ Airports and runways. Construction aggregates have formed the underpinnings for many of our cities, towns and transportation networks. Thousands of years ago, civilizations built entire cities with stone, sand and gravel, and many of these ancient structures still exist today. Aggregates are durable, attractive, and can be used in many different applications. On average, every American uses approximately eight tons of aggregates each year. Although our principal product is construction aggregates, Kemp Quarries offers a variety of other state-approved products and services. About the Position Responsible for the sampling, inspecting and testing of all produced materials (aggregate, sand, etc.) and compare against specifications. Will also be required to be a backup to all Weighmasters along with picking up parts and delivering parts as needed. KEY RESPONSIBILITES / ESSENTIAL FUNCTIONS: ◾ Regular, reliable attendance at the worksite or assigned work location. ◾ Follow all safety and environmental rules, regulations and procedures as set forth by company policies and MSHA. ◾ Follow all company policies and local, state and federal regulations for safe working procedures. ◾ Obtain samples and perform necessary tests on various aggregate products following ASTM & ODOT standards. ◾ Preparing samples of products for customers and testing laboratories and may deliver to assure safe arrival. ◾ Records and maintains test data and other required information. This includes both written records and data input into a personal computer. ◾ Performs daily maintenance on lab and test equipment. ◾ Responsible for overall housekeeping including plant, equipment, and site. ◾ Ability to comprehend and complete all needed paperwork in a timely and accurate manner. ◾ Other duties and responsibilities related to the nature of the job may be assigned on a temporary or permanent basis as needed. PHYSICAL REQUIREMENTS: ◾ Lift objects of various dimensions and up to 75 lbs occasionally and 50 lbs frequently. ◾ Ability to repeatedly climb stairs and ladders. ◾ Ability to repeatedly balance, bend from the trunk, crawl, kneel, push and pull objects. ◾ Ability to use vibration producing tools frequently. ◾ Ability to tolerate working outdoors in all environmental temperatures and weather conditions. ◾ Ability to repeatedly reach, squat and tolerate prolonged standing/walking/sitting. ◾ Ability to frequently walk on uneven surfaces. REQUIRED SKILLS/EXPERIENCE: ◾ Ability to read, write and figure mathematical calculations. ◾ Good observation skills. ◾ Self-motivated, organized and has the ability to work without direct supervision. ◾ Excellent verbal, written and comprehension communication skills. ◾ Must work well with others in a team environment. ◾ Must be able to quickly understand and adhere to safety requirements of this position. ◾ Ability to work overtime, nights and weekends as required. ◾ Ability to work near, around or on light or heavy equipment. ◾ Willingness to work outside in all weather extremes. ◾ Ability to work near, around or on light or heavy equipment. ◾ Ability to use a computer and various computer programs such as but not limited to Microsoft outlook, word and excel. Location Pryor Quarry - Pryor OK We are an equal opportunity employer, dedicated to a policy of non-discrimination in employment on any basis including age, sex, color, race, creed, national origin, religious persuasion, marital status, political belief, or disability that does not prohibit performance of essential job functions. Federal Law prohibits the employment of unauthorized aliens. All persons hired must submit satisfactory proof of employment authorization and identity (valid driver's license. Birth certificate, Green Card, etc.) with in three days of being hired. Failure to submit such proof within the required time shall result in immediate termination.

ESSENTIAL FUNCTIONS: The essential functions include, but are not limited to, the following duties. Additional essential functions may be identified by the organization and listed as such in the incumbent's performance appraisal element. Various tasks may be assigned under each essential function. Those that are listed under the examples of work are not all inclusive; they are examples only and may be amended or added to as needed by the organization. * Monitoring, observing and Evaluating Maintenance in the COMBs and Safety Procedures * Ensuring Compliance with Procedures * Dealing with Coworkers/Clients/Public JOB DUTIES: Responsibilities may include, but are not limited to: * Monitoring and reporting on COMBS warehouse supply procedures. * Assisting warehouse-receiving clerks in performance of receiving inspections during peak loads. * Investigate and submit items for warranty claims when required. * Accomplishing forms and documentation reviews as required. * Advises management on revising inspection/receiving regulations, as required, to meet contractual requirements. * Preparing discrepancy reports and recommending actions in regard to supplier/vendor material/parts found to be damaged when received. * Accomplishing the functions of the Site Safety and HAZMAT Program Monitor. * Review/Screen aircraft/engine documentation as applicable to T-6 COMBS for possible errors. * Accomplishing site training for new personnel and assisting with training records maintenance. * Monitor and maintain tool calibration and assist with GSB maintenance as needed. * Setting up and maintaining the Technical Library. * Performing QEC installation inspections. * Cleaning of warehouse, shops, offices and restroom as required. * Clerical and other assigned duties as required. QUALIFICATIONS: * Knowledge, Skills, and Abilities (Required Skills include the ability to:) * Familiarity with FAR's relating to aircraft components, parts, hardware, equipment, and Airworthiness Standards (FAR Part 21, 23, and FAR Part 43). * Thorough knowledge of warehouse shipping and receiving procedures. * Ability to communicate effectively, both orally and in writing. * Ability to deal courteously with the customer. * Maintain proficiency in the use of the various types of inspection aids to be used for inspection of the particular items undergoing inspection. * Education and Experience: * Valid FAA Airframe and Powerplant Certificate. * Graduation from a standard four (4) year high school or equivalent (GED) AND a Minimum of FIVE years' recent experience in aircraft maintenance. * Documented proof of aircraft mechanic experience. Benefits include the following: * Healthcare coverage * Retirement Plan * Life insurance, AD&D, and disability benefits * Wellness programs * Paid time off, including holidays * Learning and Development resources * Employee assistance resources Pay and benefits are subject to change at any time and may be modified at the discretion of the company, consistent with the terms of any applicable compensation or benefit plans.

**ESSENTIAL FUNCTIONS:** The essential functions include, but are not limited to, the following duties. Additional essential functions may be identified by the organization and listed as such in the incumbent's performance appraisal element. Various tasks may be assigned under each essential function. Those that are listed under the examples of work are not all inclusive; they are examples only and may be amended or added to as needed by the organization. + Monitoring, observing and Evaluating Maintenance in the COMBs and Safety Procedures + Ensuring Compliance with Procedures + Dealing with Coworkers/Clients/Public **JOB DUTIES:** Responsibilities may include, but are not limited to: + Monitoring and reporting on COMBS warehouse supply procedures. + Assisting warehouse-receiving clerks in performance of receiving inspections during peak loads. + Investigate and submit items for warranty claims when required. + Accomplishing forms and documentation **reviews as required.** + **Advises** management on revising inspection/receiving regulations, _as_ required, to meet contractual requirements. + Preparing discrepancy reports and recommending actions in regard to supplier/vendor material/parts found to **be damaged when received.** + Accomplishing the functions of the Site Safety and HAZMAT Program Monitor. + Review/Screen aircraft/engine documentation as applicable to T-6 COMBS for possible errors. + Accomplishing site training for new personnel and assisting with training records maintenance. + Monitor and maintain tool calibration and assist with GSB maintenance as needed. + Setting _up_ and maintaining the Technical Library. + Performing QEC installation inspections. + Cleaning of warehouse, shops, offices and restroom as required. + Clerical and other assigned duties as required. **QUALIFICATIONS:** + **Knowledge, Skills, and Abilities** (Required Skills include the ability to:) + Familiarity with FAR's relating to aircraft components, parts, hardware, equipment, and Airworthiness Standards (FAR Part 21, 23, and FAR Part 43). + Thorough knowledge of warehouse shipping and receiving procedures. + Ability to communicate effectively, both orally and in writing. + Ability to deal courteously with the customer. + Maintain proficiency in the use of the various types of inspection aids to be used for inspection of the particular items undergoing inspection. + **Education and Experience:** + Valid FAA Airframe and Powerplant Certificate. + Graduation from a standard four (4) year high school or equivalent (GED) **AND** a Minimum of **FIVE** years' recent experience in aircraft maintenance. + Documented proof of aircraft mechanic experience. **Benefits include the following:** + Healthcare coverage + Retirement Plan + Life insurance, AD&D, and disability benefits + Wellness programs + Paid time off, including holidays + Learning and Development resources + Employee assistance resources _Pay and benefits are subject to change at any time and may be modified at the discretion of the company, consistent with the terms of any applicable compensation or benefit plans._ Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights (**************************** notice from the Department of Labor.

Job DescriptionQuality Control Inspector II Pay Rate and Hours: Pay: $24/hr Hours: Monday through Friday, 7:00 am to 4:30 pm The Quality Inspectors are responsible for providing Quality support for the maintenance and documentation of tools and equipment for the Services Group. Supporting receiving inspections, work order inspections, first article inspections, and final inspections. Quality Inspectors are also responsible for making accurate assessments of the conformance of parts and materials which are suspect. Quality Control Inspector II Overview: Responsible for inspecting all products related to HPES (incoming inspection, production inspection, finished goods before delivery and pre and post maintenance) and providing technical guidance to the Production and Services staff. Key Responsibilities Quality Control Inspector II Primary duties may include, but are not limited to: Supports the quality department by performing and recording inspections Ensure processes and procedures are adhered to Ensure traceability is maintained throughout assembly and maintenance of tools / equipment. Confirm documentation is maintained properly Establish non-conformity reports when necessary Responsible for the necessary administration by maintaining various databases, reports and files to support the QC function Take all the actions to keep tools and instruments in conformity with the ISO procedures and QA/QC recommendations Suggests and discusses with the Quality Manager improvements on processes, equipment and tools Ensures that products containing non-conformity are under control by placing non-conforming products into quarantine area Provides and archives technical data (codes and standards) and records to increase customer satisfaction Provide technical assistance (defect detection, acceptance and rejection) to the manufacturing department by auditing the assembly process Quality Control Inspector II Experience: Experience in assembly process (as inspector) is a very good asset Experience in Quality Control is required Quality Control Inspector II Knowledge, Skills, and Abilities: Good knowledge in machine design, assembly, machining, drawings and QC activities Open to learn new technical tools like 3D arm, PMI, OES device Good organization skills, flexible, stress resistant and team spirit Rigorous, accurate and reliable Key Personnel Benefits While on Key Personnel's payroll, you can access Key's benefits package, including health, dental, vision, accident, critical illness, term life, short-term disability, PTO, and more! Only qualified applicants will be contacted to make the best use of your time. Apply online at *************** today! Our office is at 9717 E. 42nd St (TechRidge Office Complex on 42nd and Mingo), Tulsa, OK. Please bring a resume and ID to complete the I-9 form between the hours of 8 am to 3 pm, Monday through Friday. Key Personnel is an Equal Opportunity Employer.53627084

Job Title: Quality Control Inspector Reports to: Quality Manager Classification: Non-Exempt Safety Sensitive: Yes R&A Form: Quality Inspector The Quality Inspector plays a crucial role in ensuring our products meet the highest standards of quality and compliance with industry standards throughout the production process. This person will serve as a hands-on resource for our production teams, providing interpretation and guidance on compliance standards. The Quality Inspector will work closely with the Quality Manager, Quality Lead and production teams to uphold Fiber Pad and our customers' quality standards. This role is performed under established guidelines and criteria. RESPONSIBILITIES/ESSENTIAL FUNCTIONS Conducts routine inspections of in-process and completed parts for production teams, utilizes manual measuring practices for precise specifications. Verify part to print accuracy for Shipping & Receiving. Complete First Article Inspections and paperwork. Read and understand complex blueprints. Verify stock to engineering revision changes. Utilize measurement tools such as calipers to assess product dimensions and tolerances. Maintain quality systems in accordance with AS9102 standards. Reports on and speak to quality metrics for management review. Collaborate with cross-functional teams to identify areas for improvement in processes and product quality. Provide training and guidance on quality standards to production staff. Document non-conformances and assist in the development of corrective action plans. Additional duties as needed or assigned by management. Adhere to safety protocols while handling materials and operating equipment. Assist in all phases of housekeeping to keep the facility clean and organized to help maintain a neat and tidy work area. Perform other duties as needed or assigned by leadership. Requirements REQUIRED QUALIFICATIONS Minimum of 1 year of Proven experience in a Quality Control or Quality Assurance role within a manufacturing environment. Ability to use all measuring tools, read and decipher detailed measurements on blueprints. Ability to read GD&T prints and perform manual measurements frequently to complex specifications. Knowledge of AS9100 Quality System, AS9102 FAI paperwork, First Article Inspection. CMM knowledge strongly preferred. Strong analytical skills with the ability to interpret data effectively. Experience conducting quality audits and implementing quality management systems. Proficiency in using measurement tools such as calipers and gauges. Excellent attention to detail. Ability to work collaboratively in a team-oriented environment while maintaining independence when necessary. Strong communication skills, both verbal and written. Basic computer skills, familiarity with MS products is a plus Excellent organizational skills to manage multiple tasks effectively in a fast-paced environment. High level of dependability regarding attendance and punctuality. Ability to collaborate and work well within a team environment, and willingness to motivate and support others, supporting the Core Values of Fiber Pad. PHYSICAL REQUIREMENTS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job: Ability to use hands including fingers to hold, touch, see, feel, grip, squeeze, push and pull. Ability to perform pushing, pulling, forward exertion on a regular basis. Ability to see near and far, utilize peripheral vision and depth perception for tasks being performed. Ability to have overhead extension with arms on a regular basis Ability to use enhanced levels of manual dexterity with arms and hands to operate taping and packaging materials, forklifts regularly and industrial power tools occasionally. Ability to stand and walk continuously on concrete floor for 10-hour shifts Ability stand, crouch, stoop, bend, kneel and squat frequently. Ability to climb ladders frequently. Ability to work from elevated surface such as a ladder frequently. Ability to bend and twist at the hip and waist area on a regular basis Ability to rotate neck to look backwards, up, down and sideways on a regular basis Ability to regularly lift and or move 45-55 lbs. Ability to understand and communicate verbally, in person and over paging system Ability to meet requirements of and utilize all PPE when required EDUCATION: High School Diploma or equivalent required. ENVIRONMENTAL CONDITIONS The environment described here is meant to be representative of those an employee would normally encounter while performing the essential functions of the job. The physical environment requires the employee to work inside in heat/cold, with exposure to production noise. Required to use PPE while performing job functions. SPECIAL JOB DIMENSIONS Work involves overtime and could involve schedule changes based on company need. Requires adherence to deadlines and project completion deadlines. Salary Description $20-$24 + $1/hr Night Shift Differential

The Aircraft QC Inspector (CH-47 Technical Inspector) Inspects the repair and modification of aircraft structures, structural components, and engines of complex to extreme difficulty. * Inspects removal and installation aircraft subsystem assemblies such as engines, rotors, gearboxes, transmissions, mechanical flight controls and their components. * Performs scheduled and special inspections. * Inspects and performs limited maintenance operational checks and assists in diagnosing and troubleshooting aircraft subsystems using special tools and equipment as required. * Inspects forms and records related to aircraft maintenance. * Inspects defective parts of the aircraft. * Plans, conducts, and supervises aircraft technical inspections, including repairs and modifications to aircraft structures, structural components and engines. * Applies technical knowledge of airframe and power plant systems in determining equipment malfunctions. * Participates in maintenance test-flights and operation checks as required. * Ensures compliance with aircraft configuration control, oil analysis Program and test measuring diagnostic equipment calibration. * Performs additional duties, including maintenance duties, as requested. * Adheres to company policies and safety programs (Safety-first mentality). Minimum Requirements * High School Diploma or equivalent is required. * U.S. military technical school or specialized training course is desired; certification of education level is required. * Valid up-to-date A&P license with IA (preferred) * Shall have five years' aviation maintenance experience, five years rotary wing aircraft experience, and two years on the assigned Mission Design Series (MDS). All Mechanic experience must be within the six most recent years. * Shall have five years of recent applicable aircraft maintenance experience. Shall have at least one year's experience inspecting MDS aircraft assigned. All Inspector experience must be within the ten most recent years. Back shop TI shall have at least one year's experience on components being inspected. * Must have satisfactorily completed the 15-series career management field Advanced Leadership Course (formerly BNCOC), AMOC, or possess a Federal aviation Administration (FAA) Airframe and Powerplant License (A&P) (preferred). * Valid Driver's License. * Must provide own tools/toolbox. Recruiters will provide toolbox requirements to candidates upon selection. * If assigned to flight duty, shall possess a current, valid ARMY or FAA Third Class Medical Certificate and meet the qualifications in AR 95-20. Clearance Requirements * Must be able to obtain and maintain a NACI(T1) Public Trust Security Clearance. Must be able to obtain and maintain facility credentials/authorization. US Citizenship is required for facility credentials/authorization to work at this facility. Knowledge & Skills * Thorough knowledge of aircraft systems on the assigned MDS. * Advanced knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, hydraulic press machine, and those listed in the assigned MDS Maintenance Allocation Chart (MAC). * Advanced knowledge of technical publications and Logistics Information Systems. * Able to prioritize workloads to maintain schedules on assigned projects * Possess the level of experience to inspect all required aeronautical-type maintenance to be performed by aircraft mechanics. * The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records. * Exceptional communication skills, leadership abilities, and personnel management skills are required. * Ability to communicate effectively, both verbally and in writing. Physical Requirements/Working Environment * Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day. * Must be able to climb stairs, ramps, ladders, and work stands. * Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders. * May be required to lift/push/pull heavy objects whose weight may exceed 50 pounds. * Must be able to type using a standard keyboard to communicate through e-mail and various software applications. * Will handle dirty parts and lubricants. * Will be required to wear proper Personal Protective Equipment (PPE). * Must be able to pass a Respirator Physical and Fit Test qualification. * May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, etc. * May work in maintenance shop or outside. * Must be able to work in a shop where the environment is drafty, noisy, and dirty. * May be exposed to extreme noise from operating equipment. * May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles. * May be expected to work in austere environments and all-weather conditions. Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal laws and supplemental language at Labor Laws Posters.

LOOKING FOR EXPERIENCED QUALITY CONTROL INSPECTOR FOR WEST TULSA FAB SHOP FOR NIGHT SHIFT, WORK HOURS 3:30PM - 1:30AM. MONDAY-FRIDAY MUST READ MICS, CALIPERS, READ BLUEPRINTS AND TAPE MEASURE. MUST WORK IN TIGHT SPACES AND ON KNEES ALOT FOR THE JOB. BEND, STOOP. APPLY IN PERSON AT: LLOYD RICHARDS PERSONNEL 4619 S. HARVARD AVE. SUITE 105 TULSA, OK 74135 BRING RESUME, DRIVERS LICENSE AND SOCIAL SECURITY CARD TO APPLY FROM 9:00AM-2:00PM

Description:Job Description Job Title: Quality Control Inspector Reports to: Quality Manager Classification: Non-Exempt Safety Sensitive: Yes R&A Form: Quality Inspector The Quality Inspector plays a crucial role in ensuring our products meet the highest standards of quality and compliance with industry standards throughout the production process. This person will serve as a hands-on resource for our production teams, providing interpretation and guidance on compliance standards. The Quality Inspector will work closely with the Quality Manager, Quality Lead and production teams to uphold Fiber Pad and our customers' quality standards. This role is performed under established guidelines and criteria. RESPONSIBILITIES/ESSENTIAL FUNCTIONS Conducts routine inspections of in-process and completed parts for production teams, utilizes manual measuring practices for precise specifications. Verify part to print accuracy for Shipping & Receiving. Complete First Article Inspections and paperwork. Read and understand complex blueprints. Verify stock to engineering revision changes. Utilize measurement tools such as calipers to assess product dimensions and tolerances. Maintain quality systems in accordance with AS9102 standards. Reports on and speak to quality metrics for management review. Collaborate with cross-functional teams to identify areas for improvement in processes and product quality. Provide training and guidance on quality standards to production staff. Document non-conformances and assist in the development of corrective action plans. Additional duties as needed or assigned by management. Adhere to safety protocols while handling materials and operating equipment. Assist in all phases of housekeeping to keep the facility clean and organized to help maintain a neat and tidy work area. Perform other duties as needed or assigned by leadership. Requirements: REQUIRED QUALIFICATIONS Minimum of 1 year of Proven experience in a Quality Control or Quality Assurance role within a manufacturing environment. Ability to use all measuring tools, read and decipher detailed measurements on blueprints. Ability to read GD&T prints and perform manual measurements frequently to complex specifications. Knowledge of AS9100 Quality System, AS9102 FAI paperwork, First Article Inspection. CMM knowledge strongly preferred. Strong analytical skills with the ability to interpret data effectively. Experience conducting quality audits and implementing quality management systems. Proficiency in using measurement tools such as calipers and gauges. Excellent attention to detail. Ability to work collaboratively in a team-oriented environment while maintaining independence when necessary. Strong communication skills, both verbal and written. Basic computer skills, familiarity with MS products is a plus Excellent organizational skills to manage multiple tasks effectively in a fast-paced environment. High level of dependability regarding attendance and punctuality. Ability to collaborate and work well within a team environment, and willingness to motivate and support others, supporting the Core Values of Fiber Pad. PHYSICAL REQUIREMENTS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job: Ability to use hands including fingers to hold, touch, see, feel, grip, squeeze, push and pull. Ability to perform pushing, pulling, forward exertion on a regular basis. Ability to see near and far, utilize peripheral vision and depth perception for tasks being performed. Ability to have overhead extension with arms on a regular basis Ability to use enhanced levels of manual dexterity with arms and hands to operate taping and packaging materials, forklifts regularly and industrial power tools occasionally. Ability to stand and walk continuously on concrete floor for 10-hour shifts Ability stand, crouch, stoop, bend, kneel and squat frequently. Ability to climb ladders frequently. Ability to work from elevated surface such as a ladder frequently. Ability to bend and twist at the hip and waist area on a regular basis Ability to rotate neck to look backwards, up, down and sideways on a regular basis Ability to regularly lift and or move 45-55 lbs. Ability to understand and communicate verbally, in person and over paging system Ability to meet requirements of and utilize all PPE when required EDUCATION: High School Diploma or equivalent required. ENVIRONMENTAL CONDITIONS The environment described here is meant to be representative of those an employee would normally encounter while performing the essential functions of the job. The physical environment requires the employee to work inside in heat/cold, with exposure to production noise. Required to use PPE while performing job functions. SPECIAL JOB DIMENSIONS Work involves overtime and could involve schedule changes based on company need. Requires adherence to deadlines and project completion deadlines.

Position Type: Full Time Education Level: High School Job Shift: Day EDUCATION AND EXPERIENCE High school diploma or GED. Experience with calibration of inspection and test equipment preferred. Experience in an ISO 9001 environment preferred. Non-Destructive Testing Certification preferred. Ultrasonic Testing Inspector must have prior Level II experience. Preferably UT certified. What you will be responsible for: Carries out inspection activities in accordance with established quality plans, engineering specifications and procedures in order to verify that the product meets specified requirements. Must be able to effectively use, read and interpret a tape measure. Performs incoming, in-process and final dimensional and visual inspection of materials and assemblies to determine compliance. Electronically records the results to provide evidence that the product has been inspected, whether accepted or rejected. The Inspector is required to handle any nonconforming product in accordance with established work instructions and other quality system procedures. Must be able to read and interpret Engineering drawings and Customer specifications. Must have weld inspection experience. AWS D1.1 experience is preferred. Working knowledge of Nondestructive Examinations and Powder Coating. Inspection will work closely with Manufacturing to ensure full compliance to Engineering requirements. Regular attendance, ability to arrive at work punctually, ability to work onsite, ability to work overtime. Ability to work cooperatively with others, ability to deal respectfully with the public, customers, vendors, other employees, managers, and executive management. Ability to perform multiple tasks concurrently, ability to work in a fast-paced environment, ability to interchange with others in the department. Mag Particle Inspection, preferred. COMPETENCY OR POSITION REQUIREMENTS Ability to read and comprehend simple instructions, short correspondence, memos, and procedure manuals in English. Ability to write simple correspondence in English. Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization. Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute percent and to draw and interpret bar graphs Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Personal computer skills including electronic mail, record keeping, routine database activity, etc. are preferred. To apply send resume to ***********************

Job DescriptionDay Electro/Mechanical Quality Control Inspector $22.00 + Hourly Carries out inspection activities in accordance with established quality plans, engineering specifications and procedures in order to verify that the product meets specified requirements. Must be able to effectively use, read and interpret a tape measure. Performs incoming, in-process and final dimensional and visual inspection of materials and assemblies to determine compliance. Electronically records the results to provide evidence that the product has been inspected, whether accepted or rejected. The Inspector is required to handle any nonconforming product in accordance with established work instructions and other quality system procedures. Must be able to read and interpret Engineering blueprints and Customer specifications. Detail oriented and must have experience with inspection mechanical, electrical, and structural assemblies or installations. Inspection will work closely with Manufacturing to ensure full compliance to Engineering requirements. Regular attendance, ability to arrive at work punctually, ability to work on-site, ability to work overtime. Ability to work cooperatively with others, ability to deal respectfully with the public, customers, vendors, other employees, managers, and executive management. Ability to perform multiple tasks concurrently, ability to work in a fast-paced environment, ability to interchange with others in the department. Experience with pneumatic pressure or leak testing, preferred. Any NEC-code experience preferred. High school diploma or GED. Experience with calibration of inspection and test equipment mandatory 2-3 years experience. Experience in an ISO 9001 environment preferred

Research & Development - Method Development / Method Validation Chemist Join a company where you can make a difference from day one and help make the world a better and safer place. ARL Bio Pharma provides analytical and microbiological testing for the pharmaceutical industry and is the most respected name in our industry. Our laboratory works with pharmaceutical companies, compounding and hospital pharmacies, drug manufacturers, and raw material suppliers bringing excellence to pharmaceutical sciences and making pharmaceuticals safer. The position requires the performance of variety of task including development and validation of analytical method, work with HPLC (High Performance Liquid Chromatography), manage a variety of research projects, and qualitatively/quantitatively testing client samples. This position requires knowledge of commonly used concepts, practices, procedures, and instrumentation used in a chemistry laboratory. Research Scientist II manages projects with some supervision and reports to the lab supervisor. The Research Scientist II must be able to think and work independently, yet share ideas and work toward team goals. The ability to express thoughts in a clear concise manner both orally and written is also expected. Works to establish the ability to effectively prioritize and plan multiple work activities with varying deadlines and complexities. Some highlights.. Attractive Relocation Package available! Great Benefits Excellent Work/Life Balance Fantastic work environment 100% Company-paid Medical and Dental Insurance 401K Retirement with Company Match This is a full-time role Work Schedule: Days and hours of work are Monday through Friday, 8:30 a.m. to 5 p.m. Flexible hours such as early, late and weekend shift may be required. Work Restrictions: Because of vital nature of this work, we do not allow medical marijuana cards and we do random drug testing on all of our employees. Essential Functions... Qualitatively and quantitatively test of client samples. Development and validation of analytical methods. Manage research projects and coordinate project related works between different departments of ARL. Write research protocol, project report and working instruction. Communication with client regarding the project/sample test status. Use HPLC, IC and LCMSMS. Position Requirements... A BS in chemistry or related science with 4+ years industrial experience in MDMV Chemistry in the bio-technology and/or Pharmaceutical space. PhD in chemistry with 4+ years industrial experience in MDMV Chemistry in the bio-technology and/or Pharmaceutical space preferred. or related science with 0-2 years industrial experience Communication Proficiency. Work Environment... This job operates in a laboratory environment. Physical Demands... This position often requires standing for prolong periods of time; dexterity in fingers and hands to perform complex and precise manipulations; ability to walk and stood; ability to lift and move up to 50 lbs; see in the normal visual range including the ability to distinguish colors and shades and hear in the normal audio range with or without correction. AAP/EEO Statement ARL Bio Pharma, Inc. provides equal employment opportunity to all individuals regardless of their race, color, creed, religion, gender, age, sexual orientation, gender identity, national origin, disability, veteran status, genetics or any other characteristic protected by state, federal, or local law. ARL Bio Pharma, Inc. expressly prohibits any form of workplace harassment based on race, color, creed, religion, gender, age, sexual orientation, gender identity, national origin, disability, veteran status, genetics or any other characteristic protected by state, federal, or local law. Improper interference with the ability of ARL Bio Pharma, Inc. employees to perform their job duties may result in discipline up to and including discharge. Further, the company takes affirmative action to ensure that applicants and employees are treated without regard to any of these characteristics.

Crusoe's mission is to accelerate the abundance of energy and intelligence. We're crafting the engine that powers a world where people can create ambitiously with AI - without sacrificing scale, speed, or sustainability. Be a part of the AI revolution with sustainable technology at Crusoe. Here, you'll drive meaningful innovation, make a tangible impact, and join a team that's setting the pace for responsible, transformative cloud infrastructure. About the Role: At Crusoe, we move fast and we build things. We are seeking a highly detail-oriented and precise Quality Assurance Technician - Electromechanical Installer to join our manufacturing team in Tulsa. This role is critical to the safety infrastructure of our electrical equipment, requiring absolute accuracy in the assembly and installation of complex mechanical safety interlock systems (Kirk Key). You will play a vital role in quality assurance, ensuring that safety components are installed correctly and function perfectly according to engineering diagrams. What You'll Be Working On: System Installation & Sequencing: Ensure the proper management and installation of complex mechanical safety interlock systems (Kirk Key). Blueprint Interpretation: Read and interpret mechanical and electrical manufacturing drawings and schematics to a competent level, ensuring components are installed in the correct order and sequence per documentation. Inventory & Verification: Maintain a detailed, accurate inventory of specific serialized components and verify that the correct serialized components are installed at the required steps. Functionality Testing: Follow detailed installation instructions and verify the proper functionality of all installed components before releasing the product to the next stage. Layout and Fabrication: Mechanically lay out and securely mount placards and identification plates onto panels according to drawings. Logistics Support: Perform other essential duties, including moving and staging of electrical cabinets as they move through the quality assurance area. Safety & Quality Adherence: Work diligently to meet and exceed accepted safety and quality standards in all tasks performed, utilizing appropriate Personal Protective Equipment (PPE). What You'll Bring to the Team: Assembly & Technical Fundamentals: Strong background in mechanical assembly and wiring fundamentals, with proficiency in using basic hand tools. Blueprint Expertise: Proven ability to read and interpret technical schematics and blueprints to a high level of accuracy. Accuracy and Detail: Exceptional Attention to Detail and Accuracy in execution and documentation. Safety and Quality Commitment: A strong commitment to Adherence to Safety and Quality Standards and protocols. Organization & Management: Demonstrated ability in Organization and Material Management, including creating clear and accurate labels for component identification. Communication: Effective communication skills for clear reporting and collaboration with team members and engineers. Safety & Compliance: This position is designated a safety-sensitive position and/or is located in a safety-sensitive facility. Drug and alcohol program participation is required. Must be able to pass a background check. Physical Requirements: Ability to stand, walk, stoop, and bend for extended periods (up to 8 hours or more daily) to perform assembly tasks. Requires constant use of arms, hands, fingers, eyes, legs, and back. Ability to regularly lift, lower, push, and pull materials up to 50 lbs. Benefits: Industry competitive pay Restricted Stock Units in a fast growing, well-funded technology company Health insurance package options that include HDHP and PPO, vision, and dental for you and your dependents Employer contributions to HSA accounts Paid Parental Leave Paid life insurance, short-term and long-term disability Teladoc 401(k) with a 100% match up to 4% of salary Generous paid time off and holiday schedule Cell phone reimbursement Tuition reimbursement Subscription to the Calm app MetLife Legal Company paid commuter benefit; $300 per month Compensation: Compensation will be paid in the range of $25 - $28/Hr + Bonus. Restricted Stock Units are included in all offers. Compensation to be determined by the applicant's education, experience, knowledge, skills, and abilities, as well as internal equity and alignment with market data. Crusoe is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, disability, genetic information, pregnancy, citizenship, marital status, sex/gender, sexual preference/ orientation, gender identity, age, veteran status, national origin, or any other status protected by law or regulation.

Job Description Chemical Service Technician at a Data Center-Tulsa Oklahoma A Water treatment Chemical Technician will be responsible for working at a customer's data center in the Tulsa, Oklahoma area. The Chemical Technician will solve customer water treatment concerns, perform extensive water treatment lab work, and troubleshoot water treatment and control equipment at a customer's massive data center. As a Chemical Service Technician, you will receive an industry competitive salary, expenses, and benefits. In addition, ample technical support is provided along with continuous training. Compensation is based upon experience and the ability to succeed. $55,000 to $70,000 first year base for a qualified candidate. Plus a year-end bonus! We hire with a focus that favors the committed employee both in terms of overall compensation and growth opportunities. We have designed our compensation package accordingly. Benefits include a corporate 401k, health, dental, vision, and life insurance. Garratt-Callahan (wwwgarrattcallahan.com) is family friendly, profitable, stable, and fiercely private. No layoffs in 120 years. No ownership change in 120 years. 80 straight years of profitability. We have operations from Asia, to the Caribbean, and in every state in the USA. Job Responsibilities: Solve customers' water problems. Treat industrial cooling towers to keep them energy efficient and environmentally friendly. Perform detailed water testing & analyses at a data center. Help deliver on customer KPIs and promote Garratt-Callahan solutions including proprietary chemical blends, equipment, & monitoring technology. Reports directly to the Site Manager. Keep our existing customers happy and safe. About Garratt-Callahan: Garratt-Callahan is a US based private 120 year old, nationwide water treatment chemical company. Garratt-Callahan *********************** treats industrial boilers and cooling towers to keep them energy efficient and environmentally friendly with one of the most advanced product lines in the industry. We are registered to ISO 9001:2015 and sell an industry leading line of “green" solutions, G-C GreenTech. We are headquartered in Burlingame, California. G-C is family owned, profitable, and expanding. We have five chemical plants in the USA, sales people in every state, and operations in Asia, the Pacific, and the Caribbean. Benefits: We offer a competitive benefit package which includes medical, dental, vision, AD&D, LT, and 401k. First year compensation $55,000 to $70,000 plus bonus, depending on experience. Car Allowance Advanced training, and a clear career path. Family friendly, flexible hours. A huge benefit of working for Garratt-Callahan is our stability and low turnover. No Layoffs in our 120-year history. G-C is a profitable company. The last year that G-C did not turn a profit was during World War 2. To Apply, please log on to: ************************************************************************************************************************ Id=19000101_000001&job Id=557126&source=CC2&lang=en_US Thank you for considering Garratt-Callahan Company. Garratt-Callahan is an EEO/AAE employer. Minorities, women, veterans and individuals with disabilities are encouraged to apply. Requirements: You will be a successful applicant if you have a technical degree in Chemistry, Chemical Engineering, Biology, Mechanical Engineering, Paper Science, or Water Resources. You must have a 4-year technical degree in the sciences to qualify for this position. A successful applicant must have experience or interest in learning advanced water treatment technologies. A successful applicant must be detail-oriented, adhere to safety protocols, and be able to lift 50 pounds wearing PPE in all weather conditions. One year technical sales, or an internship related to water treatment chemicals is preferred, but we are willing to train and mentor. Outside industrial sales experience is a plus. You must live in or near Tulsa, Oklahoma and be familiar with the industrial marketplace of the area. Additional Preferred Qualifications: • Familiarity With Industrial Cooling Towers • Knowledge and Proficiency with Lab Procedures, Water Equipment, & Water Chemistry • Ability to Provide Virtual Presentations to Group • Experience Working in a Team Setting as a Collaborative Partner NOTE: Garratt-Callahan does not sponsor work visas. No recruiters please. If you have a disability, and need assistance during the application and selection process as a result, please contact the Garratt-Callahan Human Resources department at ************. Arrangements can be made to provide an accommodation in order to assist you in applying for an open position using our on-line system, completing any other related paperwork, interviewing, or any other portion of the employment process. This phone number is only for disability assistance. When requesting an accommodation, please provide your name, phone, email address, or any other means of contacting you. Provide a brief description of the nature of the requested accommodation. A member of the Human Resources team will then contact you to discuss your request. A request for an accommodation will not affect your opportunities for employment with Garratt-Callahan. Garratt-Callahan values differing experiences, backgrounds and perspectives among our employees, and see them as a competitive advantage. Garratt-Callahan is committed to the fair and equal treatment of all associates and applicants. Garratt-Callahan is an equal opportunity employer that evaluates qualified applicants without regard to race, color, national origin, religion, sex, age, marital status, disability, veteran status, sexual orientation, gender identity, or any other characteristic protected by law. The “Equal Employment Opportunity is the Law” poster is available at: **************************************************************** Garratt-Callahan Company's reaffirmation of Equal Employment/Affirmative Action Statement ************************************************************************ Key Words: Chemistry, chemicals, scientific, science, salesperson, salesman, saleswoman, outside sales, technical sales, account representative, account executive, territory sales, territory manager, district sales, district manager, field engineer, field service, AE, sales engineer, data center, chemical engineer, chemist, mechanical engineer, biologist, biology, microbiology, nalco, ecolab, us water, Suez, ge water, chemtreat, veolia, solenis, chem-aqua, kurita, evoqua, fremont, water treatment, boilers, cooling towers, waste water, pumps, equipment, chillers, polymers, biocides, data center, Tulsa, Oklahoma, Pryor, Broken Arrow

Position Type: Full Time Education Level: High School Job Shift: Night EDUCATION AND EXPERIENCE High school diploma or GED. Experience with calibration of inspection and test equipment preferred. Experience in an ISO 9001 environment preferred. Non-Destructive Testing Certification preferred. Ultrasonic Testing Inspector must have prior Level II experience. Preferably UT certified. What you will be responsible for: Carries out inspection activities in accordance with established quality plans, engineering specifications and procedures in order to verify that the product meets specified requirements. Must be able to effectively use, read and interpret a tape measure. Performs incoming, in-process and final dimensional and visual inspection of materials and assemblies to determine compliance. Electronically records the results to provide evidence that the product has been inspected, whether accepted or rejected. The Inspector is required to handle any nonconforming product in accordance with established work instructions and other quality system procedures. Must be able to read and interpret Engineering drawings and Customer specifications. Must have weld inspection experience. AWS D1.1 experience is preferred. Working knowledge of Nondestructive Examinations and Powder Coating. Inspection will work closely with Manufacturing to ensure full compliance to Engineering requirements. Regular attendance, ability to arrive at work punctually, ability to work onsite, ability to work overtime. Ability to work cooperatively with others, ability to deal respectfully with the public, customers, vendors, other employees, managers, and executive management. Ability to perform multiple tasks concurrently, ability to work in a fast-paced environment, ability to interchange with others in the department. Mag Particle Inspection, preferred. COMPETENCY OR POSITION REQUIREMENTS Ability to read and comprehend simple instructions, short correspondence, memos, and procedure manuals in English. Ability to write simple correspondence in English. Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization. Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute percent and to draw and interpret bar graphs Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Personal computer skills including electronic mail, record keeping, routine database activity, etc. are preferred. To apply send resume to ***********************

Job DescriptionQuality Control Inspector (Electro/Mechanical) Carries out inspection activities in accordance with established quality plans, engineering specifications and procedures in order to verify that the product meets specified requirements. Must be able to effectively use, read and interpret a tape measure. Performs incoming, in-process and final dimensional and visual inspection of materials and assemblies to determine compliance. Electronically records the results to provide evidence that the product has been inspected, whether accepted or rejected. The Inspector is required to handle any nonconforming product in accordance with established work instructions and other quality system procedures. Must be able to read and interpret Engineering blueprints and Customer specifications. Detail oriented and must have experience inspection mechanical, electrical, and structural assemblies or installations. Inspection will work closely with Manufacturing to ensure full compliance to Engineering requirements. Regular attendance, ability to arrive at work punctually, ability to work on-site, ability to work overtime. Ability to work cooperatively with others, ability to deal respectfully with the public, customers, vendors, other employees, managers, and executive management. Ability to perform multiple tasks concurrently, ability to work in a fast-paced environment, ability to interchange with others in the department. Experience with pneumatic pressure or leak testing, preferred. Any NEC-code experience preferred. High school diploma or GED. Experience with calibration of inspection and test equipment mandatory 2-3 years experience. Experience in an ISO 9001 environment preferred