Quality inspector jobs in Dayton, OH

Resonant Sciences LLC has an immediate opening for a Quality Inspector to join our Dayton, Ohio team. The position provides an opportunity to join a fast-paced elite team whose primary mission is to support our Nation's War Fighters. The candidate for this position shall be a self-starter who can work independently, unsupervised, and with little guidance. The candidate will have an opportunity to be a member of a world class team consisting of talented and dedicated engineers, technicians and professionals who work together to interrupt and challenge the status quo to design and develop state-of-the-art technologies. DUTIES AND RESPONSIBILITIES: We are seeking a highly skilled and experienced Quality Inspector to join our team and be responsible for ensuring the safety and quality of our products and procedures through rigorous inspections, implementation of quality control measures, and identification of areas for improvement. The selected Quality Inspector will have responsibility for the following areas: Develops and initiates methods and procedures for inspection, testing, and evaluation. Devises sampling procedures; supervises the design of forms for recording quality checks and preparation of instructions for these procedures. Collaborates with cross-functional teams to address quality issues, drive continuous improvement, and contribute to building high-quality products that exceed customer expectations. Prepares and offers constructive criticism relative to variables and deviations from prescribed standards of quality. Maintains metrics (charts, graphs, and statistical records) having to do with quality, causes of defects, and their corrective measures. Works with the Engineering Department to define and document inspection and test processes. During reviews, ensures that related quality considerations are well defined and documented in a quality plan. Works with engineering to evaluate drawings, specifications, and changes during the formative stages of the production process design for factors affecting quality, reliability, safety, production, and operation of the product. Coordinates with customers to notify them of production nonconformances. Conducts thorough inspections of incoming goods and materials. Ensuring compliance with quality standards. Work closely with all stakeholders in various departments. Hands-on in our labs and production floor working with our technicians. Certifies to our customers that our deliverable products meet all program requirements. Performs other duties, as assigned. REQUIRED QUALIFICATIONS: Minimum three (3) + years quality experience. A good understanding of GD&T. Knowledge of AS9100D and ISO 9001. Writing and communication skills with experience contributing to and/or making technical presentations to internal and external customers. A desire to work in a fast-paced work environment with a motivated team that prides itself on its attention to detail, agility, and ability to execute. Excellent verbal and written communication skills. Excellent organizational and problem-solving skills. Ability to be a team player. Excellent computer skills, familiarity with Microsoft Word, Excel, and PowerPoint. Experience with first article inspections (FAI) using AS9102 requirements and document results. Support nonconformance investigations, including root cause analysis, containment, and corrective/preventive actions (RCCA). DESIRED QUALIFICATIONS: College/Technical degree or equivalent technical/professional certificate. J-STD and IPC-A-610 certification highly desired. Previous work experience as a Quality Engineer or similar role. Hands-on experience with Quality Management Systems (QMS) and testing methodologies. Knowledge of measurement tools (calipers, micrometers, CMM output review, gauges). Knowledge of TipQA/CostPoint ERP systems. CITIZENSHIP/SECURITY CLEARANCE: U.S. Citizenship required. Must be eligible to obtain and/or maintain a Secret security clearance. Active clearance is preferred. WHAT'S IN IT FOR YOU? Become part of a high-tech work environment that is highly impactful, exciting, and collaborative. Flexible working environment that enables our employees to balance work and personal life. A comprehensive benefits package that includes medical, dental, vision and prescription benefits with extremely low employee cost share for you and your eligible dependents. A well-funded Health Spending Account with standard account fees paid by Resonant Sciences. 10 Federal Holidays (6 Standard, 4 Floating). A flexible Paid Time Off plan for employees. A generous retirement plan, subject to plan, IRS and ERISA rules. WHO ARE WE? Resonant Sciences is a research and development firm with locations all over the United States, focused on developing and transitioning innovative technologies and solutions to developmental and operational platforms. Our areas of expertise include radome and antenna design and fabrication, custom electronic solutions, and RF measurements of materials, antennas, radomes, and subsystems. Our extensive capabilities include design and analysis, production, and ground and flight testing. A career at Resonant Sciences means that you will be involved in the complete development life cycle, seeing your design evolve from development prototype to incorporating mission requirements to technical specifications into a finished product for field testing. We are an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status

AFC Industries is a dynamic organization dedicated to providing supply chain management solutions for fasteners and assembly components to original equipment manufacturers, assembly plants, and other users of these products. We support a diverse industry base of manufacturers across a broad range of industries. Our experienced team has a proven track record of helping manufacturers and assemblers reduce cost, improve quality, and increase efficiency. We are A Company Culture Devoted to Innovation & Improvement AFC provides localized expertise to customers in particular industries and geographies. We don't have a traditional hierarchical management structure where everyone simply "reports up." Instead, our company is made up of on-the-ground experts operating in an entrepreneurial fashion with the backing and support of an enterprise-grade organization. Sharing cultural values breeds consistency and quality throughout our organization. Collectively, we are committed to a simple management approach, which influences our company culture and our management style. Job Description: The Quality Receiving Inspector reports to the Quality Manager. Activities and responsibilities of the Quality Receiving Inspector include: Perform Fit, Form, and Function inspections on incoming parts using calipers, micrometers, and thread ring gages Ensure incoming parts are properly identified and match order documentation Review receiving labels for accuracy prior to parts being placed in inventory locations Identify incoming RMA items and alert quality department of receipt Review incoming material certs and notify quality department and purchasing of any missing documentation Assist the quality department and shipping with dock audits when necessary Assist warehouse with cycle counts or inventory location when necessary Assist with identification, containment, and segregation of nonconforming material Professional Experience Requirements: Education: · A high school diploma or GED is required. Work Experience: One to two years of experience in a quality assurance role. Experience with gages, testing equipment, and inspection techniques. Professional Skills: 1+ year experience in production/warehouse/quality Basic math and communication skills required Basic computer skills Ability to lift heavy items Ability to use calipers, micrometers, and thread gages Basic visual familiarity with coatings (such as Yellow Zinc, and Black Zinc Oxide) is preferred Location: In-person, West Chester, OH Work Hours: 7AM-3:30PM, Monday-Friday Hourly Pay: $19.00-26.00 (Depending upon experience) Benefits: 401(k) 401(k) matching Dental insurance Flexible spending account Health insurance Life insurance Paid time off Vision insurance

Job DescriptionSalary: $25.00 - $27.00 Quality Assurance CMM Quality Inspector (3rd Shift) Schedule: MondayThursday, 8:00 PM to 6:00 AM Employment Type: Direct Hire Background Check/Drug Screen: Required About the Role A growing aerospace manufacturing facility in Troy, OH is urgently seeking a CMM Quality Inspector to join their night shift team. This role plays a critical part in ensuring dimensional accuracy and product quality during off-hours production. Youll perform detailed inspections using advanced metrology tools and CMM equipment in a fast-paced but supportive environment. This is a great opportunity for a precision-driven professional who enjoys working independently while maintaining high standards of quality control. Key Responsibilities Operate Coordinate Measuring Machines (CMMs) with PC-DMIS software Perform 1st piece, in-process, and final inspections Interpret engineering drawings with strong knowledge of Geometric Dimensioning & Tolerancing (GD&T) Use inspection tools including OD Micrometers, Comparators, Pitch Micrometers, and Depth Micrometers Inspect for and measure circular runout, total runout, and cylindricity Record precise inspection results and maintain documentation Work independently while coordinating with day shift QA as needed Qualifications Required: Minimum 2 years of experience operating a CMM (PC-DMIS strongly preferred) Solid understanding of GD&T and blueprint interpretation Proficient with precision instruments: OD Mics, Pitch Mics, Depth Mics, Comparators, etc. Experience inspecting complex components with tight tolerances Reliable and self-motivated with good communication skills Preferred: Experience using Sheffield and Brown & Sharpe CMM machines Stable work history with a strong focus on quality and detail Ability to thrive in a high-output manufacturing environment Work Environment & Growth The company culture is busy but laid-back, with a focus on teamwork and accountability. Operators who demonstrate initiative and leadership potential may have the opportunity to take on increased responsibilities or move into supervisory roles in the future.

Creating Peace of Mind by Pioneering Safety and Security At Allegion, we help keep the people you know and love safe and secure where they live, work and visit. With more than 30 brands, 12,000+ employees globally and products sold in 130 countries, we specialize in security around the doorway and beyond. Additionally, in 2024 we were awarded the Gallup Exceptional Workplace Award, which recognizes the most engaged workplace cultures in the world. Join Our Team as a Quality Inspector at Allegion! Are you detail-oriented with a passion for quality and precision? Do you excel in using advanced inspection tools and techniques? Allegion is looking for a dedicated and skilled Quality Inspector to join our dynamic team! Position Summary: As a Quality Inspector at Allegion, you will utilize prescribed methods, techniques, and standardized inspection instruments and testing devices to perform physical audits and documentation of machined and fabricated parts, units, and sub-assemblies. Your role is crucial in ensuring tolerance, finish requirements, operating quality, and adherence to associated manufacturing processes and procedures. Primary Duties: Conduct audits using predetermined methods and procedures to check layouts, tolerances, and finish requirements on a diversified line of piece-parts. Perform audits and testing of sub-assemblies and assemblies to ensure they meet acceptable standards of performance using standardized testing equipment. Make critical decisions regarding adherence to quality standards, allowable variations, rejects, or malfunctions. Refer non-conforming work to management for final disposition. Skills/Abilities: Proficiency in working from part or assembly drawings and specifications. Expertise in using tools such as squares, calipers, micrometers, indicators, verniers, parallels, special adjustable gauges, fixed limit, and plug gauges. Ability to work independently with minimal supervision. Strong communication skills to effectively collaborate with team members. Work Environment: Occasional exposure to temperature extremes, humid/arid conditions, heights, noise levels >80 dB, mechanical hazards, moving objects, allergens, and insect bites. Physical Demands: Clear speaking and hearing abilities. Excellent vision, including depth perception and color distinction. Frequent standing, walking, balancing, stooping, kneeling, crouching, and finger movement (4 or more hours per day). Occasional sitting, twisting, and reaching (overhead and to the side). Expected Hours of Work: 8-hour shifts from Monday to Friday, with weekend and daily overtime hours as required for production. Why Allegion? We are committed to providing a diverse and inclusive work environment. Competitive compensation and benefits package. Opportunities for growth and development within the company. Compensation: $24.65 per hour AAP/EEO: Allegion is committed to complying with its Equal Employment Opportunity Policy and will not discriminate based on race, sex, color, national origin, creed, religion, pregnancy, age, disability, military status, protected veteran status, sexual orientation, gender identity, genetic information, marital status, or any legally protected status. Join Us: If you are ready to take your career to the next level and make a significant impact in a growing company, apply today to become an Inspector at Allegion. We look forward to welcoming you to our team! We Celebrate Who We Are! Allegion is committed to building and maintaining a diverse and inclusive workplace. Together, we embrace all differences and similarities among colleagues, as well as the differences and similarities within the relationships that we foster with customers, suppliers and the communities where we live and work. Whatever your background, experience, race, color, national origin, religion, age, gender, gender identity, disability status, sexual orientation, protected veteran status, or any other characteristic protected by law, we will make sure that you have every opportunity to impress us in your application and the opportunity to give your best at work, not because we're required to, but because it's the right thing to do. We are also committed to providing accommodations for persons with disabilities. If for any reason you cannot apply through our career site and require an accommodation or assistance, please contact our Talent Acquisition Team. © Allegion plc, 2023 | Block D, Iveagh Court, Harcourt Road, Dublin 2, Co. Dublin, Ireland REGISTERED IN IRELAND WITH LIMITED LIABILITY REGISTERED NUMBER 527370 Allegion is an equal opportunity and affirmative action employer Privacy Policy

Creating Peace of Mind by Pioneering Safety and Security At Allegion, we help keep the people you know and love safe and secure where they live, work and visit. With more than 30 brands, 12,000+ employees globally and products sold in 130 countries, we specialize in security around the doorway and beyond. Additionally, in 2024 we were awarded the Gallup Exceptional Workplace Award, which recognizes the most engaged workplace cultures in the world. Join Our Team as a Quality Inspector at Allegion! Are you detail-oriented with a passion for quality and precision? Do you excel in using advanced inspection tools and techniques? Allegion is looking for a dedicated and skilled Quality Inspector to join our dynamic team! Position Summary: As a Quality Inspector at Allegion, you will utilize prescribed methods, techniques, and standardized inspection instruments and testing devices to perform physical audits and documentation of machined and fabricated parts, units, and sub-assemblies. Your role is crucial in ensuring tolerance, finish requirements, operating quality, and adherence to associated manufacturing processes and procedures. Primary Duties: * Conduct audits using predetermined methods and procedures to check layouts, tolerances, and finish requirements on a diversified line of piece-parts. * Perform audits and testing of sub-assemblies and assemblies to ensure they meet acceptable standards of performance using standardized testing equipment. * Make critical decisions regarding adherence to quality standards, allowable variations, rejects, or malfunctions. * Refer non-conforming work to management for final disposition. Skills/Abilities: * Proficiency in working from part or assembly drawings and specifications. * Expertise in using tools such as squares, calipers, micrometers, indicators, verniers, parallels, special adjustable gauges, fixed limit, and plug gauges. * Ability to work independently with minimal supervision. * Strong communication skills to effectively collaborate with team members. Work Environment: * Occasional exposure to temperature extremes, humid/arid conditions, heights, noise levels >80 dB, mechanical hazards, moving objects, allergens, and insect bites. Physical Demands: * Clear speaking and hearing abilities. * Excellent vision, including depth perception and color distinction. * Frequent standing, walking, balancing, stooping, kneeling, crouching, and finger movement (4 or more hours per day). * Occasional sitting, twisting, and reaching (overhead and to the side). Expected Hours of Work: * 8-hour shifts from Monday to Friday, with weekend and daily overtime hours as required for production. Why Allegion? * We are committed to providing a diverse and inclusive work environment. * Competitive compensation and benefits package. * Opportunities for growth and development within the company. Compensation: $24.65 per hour AAP/EEO: Allegion is committed to complying with its Equal Employment Opportunity Policy and will not discriminate based on race, sex, color, national origin, creed, religion, pregnancy, age, disability, military status, protected veteran status, sexual orientation, gender identity, genetic information, marital status, or any legally protected status. Join Us: If you are ready to take your career to the next level and make a significant impact in a growing company, apply today to become an Inspector at Allegion. We look forward to welcoming you to our team! We Celebrate Who We Are! Allegion is committed to building and maintaining a diverse and inclusive workplace. Together, we embrace all differences and similarities among colleagues, as well as the differences and similarities within the relationships that we foster with customers, suppliers and the communities where we live and work. Whatever your background, experience, race, color, national origin, religion, age, gender, gender identity, disability status, sexual orientation, protected veteran status, or any other characteristic protected by law, we will make sure that you have every opportunity to impress us in your application and the opportunity to give your best at work, not because we're required to, but because it's the right thing to do. We are also committed to providing accommodations for persons with disabilities. If for any reason you cannot apply through our career site and require an accommodation or assistance, please contact our Talent Acquisition Team. Allegion plc, 2023 | Block D, Iveagh Court, Harcourt Road, Dublin 2, Co. Dublin, Ireland REGISTERED IN IRELAND WITH LIMITED LIABILITY REGISTERED NUMBER 527370 Allegion is an equal opportunity and affirmative action employer Privacy Policy

Job Description Supplier Inspection Services, Inc. (SIS, Inc.) is hiring full-time Manufacturing Quality Inspectors at $15.00 per hour in the Dayton, OH and surrounding areas. Supplier Inspection Services, Inc. provides quality management support services that assist our clients manufacture and deliver high quality products. Our clients include component manufacturers in the Automotive, Aerospace, Appliance and general manufacturing industries. Our Manufacturing Quality Inspectors perform visual inspection and rework of manufactured parts. Manufacturing Quality Inspectors starting pay @ $15.00/hour with room for advancement. Manufacturing Quality Inspectors job duties include but are not limited to: • Performing a range of varied inspection tasks • Using inspection, measuring and test equipment as necessary • Perform visual inspection either at one of our local facilities or where the parts are manufactured or stored • Reading and following written and verbal work instructions • May work overtime and/or weekends as assigned Qualifications • HS diploma or GED equivalency • Steel toe shoes • Basic math skills • Detailed oriented • Follow verbal and written instructions • Provide accurate and complete information for required paperwork • Must have own vehicle and a valid driver's license • Must be able to walk, stand, lift up and move material and perform repetitive tasks for an entire shift What You'll Love About Working With Us • Variety of work in various manufacturing plants and industries • Medical, Dental, Vision and Short-Term Disability, upon eligibility • Paid weekly • Six (6) paid Holidays, upon eligibility • Forty (40) hours of paid vacation, upon eligibility • Retirement Program, upon eligibility • Birthday, Work Anniversary and Employee of the Month recognition program • Advancement opportunities *Part-time applicants must be willing to work a full-shift (at least 8 hours) per shift.

Enjet Aero machines and fabricates complex jet engine parts, components and assemblies for leading OEMs in the commercial, defense and general aviation sectors. Our goal is to be regarded as an irreplaceable resource by our customers. The only way for a company to meet such a goal is to consistently meet production deadlines and expectations. Position Description: Quality Inspector reports to the Quality Manager and ensures parts and processes meet the requirements of operation work instructions, customer requirements including the drawing. The schedule for this position is 1st shift, Monday - Friday 7:30 am - 4:00 pm Essential Responsibilities: Inspects and approves incoming materials/parts by confirming to work instructions, drawings, specifications, conducting visual and measurement tests, and rejecting unacceptable materials/ parts Inspects in-process & final production parts by confirming to work instructions, specifications, conducting visual and measurement tests, recording non-conforming parts in the appropriate database Maintain records of testing and information such as number of defective products, dimensional results, etc. in accordance with the Quality procedures Keeps measurement equipment operating by following operating instructions and calibration requirements and calling for repairs Ability to complete DSQR training and earn DSQR certification to meet customer requirements Use inspection equipment & automated systems to perform part inspections Accomplish [Verify] first piece at the operation which approves the parts to be processed Conveys verbally and/or in writing, the condition of the parts being inspected Utilize electronic databases for submitting non conformances or obtaining work instructions Performs administrative duties consistent with departmental practices Follows all safety policies and procedures Other duties as assigned Qualifications High School diploma or GED with excellent working knowledge of trigonometry. Minimum two years of experience in manufacturing including operational inspection or supporting quality inspection utilizing hand held gages. Knowledge and ability to apply GD&T DSQR/DPRV experience preferred Ability to read blueprints and instructions to comprehend the quality expectations for parts or materials Basic computer skills including data entry Reads and interprets customer and industry specifications. Benefits: Enjet offers a comprehensive benefits package to full-time employees including paid time off, health insurance, dental insurance, vision insurance, paid holidays, a 401K retirement plan, disability insurance, and more. As an EOE/AA employer, Enjet Aero will not discriminate in its employment practices due to an applicant's race, color, religious creed, national origin, ancestry, sex, age, veteran status, marital status or physical challenges.

Job Title: Fire Protection QC Inspector - Kitchens & Fire Extinguishers Location: Dayton, OH Silco Fire & Security isn't just a company, it's a mission. Every day, our team plays a vital role in protecting lives and property for over 45,000 businesses across Ohio, Kentucky and surrounding states. We design, install, maintain and monitor fire protection and security systems that keep people safe and businesses compliant. As the market leader in the Midwest, Silco is a growing, family-owned company with over 400 employees working from our headquarters in Cincinnati and branches in Dayton, Columbus, Toledo, Akron, Cleveland and Louisville. Recognized as a Top Workplace and named to the Inc. 5000 list of fastest-growing private companies, we have a long-standing track record of success and ambitious goals for the future. Our impact extends beyond fire alarms and sprinklers. We provide peace of mind to the communities we serve. At Silco, you're not just doing a job, you're making a difference. Position Overview: We are seeking a highly skilled and experienced Quality Control Inspector with a minimum of 5 years of expertise in the fire protection industry. The ideal candidate will play a crucial role in ensuring that our products and installations adhere to the highest standards. Responsibilities: Conduct Quality Inspections: Performing Quality Checks on inspections that have been performed on Kitchen Fire Protection Systems and Fire Extinguishers Ensure that inspections and installations comply with state and NFPA codes and regulations. Documentation and Reporting: Maintain detailed records of inspection findings, documenting any deviations or non-compliance issues. Generate comprehensive reports daily that will be distributed to employees and their managers. Collaboration: Work closely with Operation Managers, Supervisors, and service and installation teams to address quality concerns, provide guidance on corrective actions, and improve our quality standard. Provide consultations with techs and suggested follow up training when needed. Continuous Improvement: Participate in the development and implementation of quality control procedures and protocols. Identify opportunities for process improvements to enhance overall efficiency and effectiveness. Training and Development: Provide training to inspection teams on quality control standards, best practices, and regulatory requirements. Stay informed about industry advancements and changes in codes and standards. Qualifications: Minimum of 5 years of experience within the fire protection and life safety systems industry. Experience with Kitchen Suppression Systems and Fire Extinguishers is preferred. In-depth knowledge of relevant codes and standards (i.e. NFPA, local building codes). Strong attention to detail and excellent analytical skills. Ability to work independently and collaboratively within a team. Benefits: In addition to a competitive compensation package, Silco offers a wide range of benefits such as medical, dental, vision, Aflac and a Flexible Spending Account (FSA). Silco offers company paid short-term disability and life insurance, as well as company paid training. The Company also boasts a 401(k) program with company matching and tuition reimbursement. Silco provides paid holidays and generous paid time off. Employment at Silco is contingent upon completing and passing a background check and drug screen. Silco is an Equal Opportunity Employer.

Join trak group in partnering with a growing client in Fairfield, Ohio that's expanding its All team. Job Title: Contract Quality Inspector - Mechanical Job Description: We are seeking a skilled Contract Quality Inspector with expertise in mechanical systems to join our team at our Fairfield, Ohio location. The Quality Inspector will be responsible for ensuring that all mechanical components and products meet quality standards and specifications. Key Responsibilities: - Conduct inspections of mechanical components and assemblies to ensure compliance with engineering specifications and quality standards. - Utilize precision measurement tools and equipment to perform detailed inspections. - Interpret engineering drawings and specifications to identify quality requirements. - Document inspection results and maintain accurate records of findings and corrective actions. - Collaborate with engineering and production teams to address quality issues and implement improvements. - Assist in the development of quality control procedures and inspection plans. - Participate in internal and external audits as required. Required Skills: - Strong knowledge of mechanical inspection techniques and quality standards. - Proficiency in using precision measurement tools such as calipers, micrometers, and gauges. - Ability to read and interpret engineering drawings and specifications. - Excellent attention to detail and problem-solving skills. - Strong communication skills for effective collaboration with cross-functional teams. - Experience with quality management systems and documentation. Qualifications: - High school diploma or equivalent;technical training in mechanical inspection preferred. - Previous experience in a mechanical quality inspection role. - Familiarity with industry standards and best practices for quality assurance. Contract Details: - This is a contract position with competitive hourly compensation. - Flexible working hours with potential for overtime as needed. Apply today to join our team and contribute to maintaining high-quality standards in our mechanical products and components! If you're ready to take the next step in your career and want to make an impact, partner with trak group to explore this opportunity.

Overview KADANT BLACK CLAWSON LLC is an established leader in equipment and systems for the international pulp and paper process industries. For 150 years, we've helped our customers reduce their input costs and improve efficiency through innovative products and technologies. Our sustainability efforts have been nationally recognized, and Kadant is also listed on the New York Stock Exchange (KAI). Our state-of-the-art manufacturing facility is located in Lebanon, OH, where we design and manufacture our products for customers across the globe. We currently seek to fill the role of Quality Inspector to perform inspections accurately and timely to ensure that a quality product is manufactured according to all required specifications before the product is shipped to the customer, all while advancing KBC's mission of being a forward-thinking, collaborative, and ethical business. Responsibilities Establishes and maintains test inspection criteria for all KBC products. Conducts in-process inspections at the plant and/or at suppliers as required. Performs final pre-shipment test and inspection of various KBC produced and subcontracted products. This involves use of a portable CMM (coordinate measuring machine) arm. Develops and maintains Product Quality Specifications. This includes assisting our suppliers in understanding our specifications and requirements unique to KBC products. Establishes in-process inspection points and identifies special fixtures, jigs, and inspection equipment unique for our products. This will include identifying when and where the instruments are needed. Administers Discrepant Material Reports (DMRs) and the deviation processes. Assists in resolution of warranty claims and completes failure analysis as needed. Qualifications Excellent verbal and written communication skills. Excellent interpersonal and customer service skills. Excellent organizational skills and attention to detail. Excellent time management skills with a proven ability to meet deadlines. Strong analytical and problem-solving skills. Demonstrates KBC values of personal accountability, discipline, trust, and proactive action A high school diploma or equivalent is required for the position, and at least five years of related experience. Must have broad knowledge and experience in fabrication, machining, and assembly and a high degree of technical capability. Experience working under a QMS/ISO 9001 or other ISO certified business quality system is required. Must be proficient in the use of all typical test and inspection equipment used in the evaluation of product. A strong knowledge of Microsoft Office products, ERP system, and portable CMM knowledge is required. ASQ Certification is a plus. Must have the ability to lift and carry up to 50 pounds occasionally. Anything over 50 pounds requires two people or the use of a lifting device. Equal Opportunity Employer M/F/Disability/Veteran All benefits, including medical, dental, vision, PTO, and 401k are effective upon hire! Position also eligible for our production bonus plan (up to 2K per year)! Excellent verbal and written communication skills. Excellent interpersonal and customer service skills. Excellent organizational skills and attention to detail. Excellent time management skills with a proven ability to meet deadlines. Strong analytical and problem-solving skills. Demonstrates KBC values of personal accountability, discipline, trust, and proactive action A high school diploma or equivalent is required for the position, and at least five years of related experience. Must have broad knowledge and experience in fabrication, machining, and assembly and a high degree of technical capability. Experience working under a QMS/ISO 9001 or other ISO certified business quality system is required. Must be proficient in the use of all typical test and inspection equipment used in the evaluation of product. A strong knowledge of Microsoft Office products, ERP system, and portable CMM knowledge is required. ASQ Certification is a plus. Must have the ability to lift and carry up to 50 pounds occasionally. Anything over 50 pounds requires two people or the use of a lifting device. Equal Opportunity Employer M/F/Disability/Veteran All benefits, including medical, dental, vision, PTO, and 401k are effective upon hire! Position also eligible for our production bonus plan (up to 2K per year)! Establishes and maintains test inspection criteria for all KBC products. Conducts in-process inspections at the plant and/or at suppliers as required. Performs final pre-shipment test and inspection of various KBC produced and subcontracted products. This involves use of a portable CMM (coordinate measuring machine) arm. Develops and maintains Product Quality Specifications. This includes assisting our suppliers in understanding our specifications and requirements unique to KBC products. Establishes in-process inspection points and identifies special fixtures, jigs, and inspection equipment unique for our products. This will include identifying when and where the instruments are needed. Administers Discrepant Material Reports (DMRs) and the deviation processes. Assists in resolution of warranty claims and completes failure analysis as needed.

United Alloy is a preferred designer, manufacturer and powder coater of certified metal tanks, skids, frames, trailers, chassis, and related products crafted to world-class quality standards in strategic partnership with Fortune 500 OEM customers.UA products are proudly "Made in the USA". In addition to being made in the USA, UA is also 9001 certified, and has been recognized as a WBENC woman/minority owned business. CULTURE United Alloy empowers and entrusts our employees to manage the responsibilities of both their work and home lives. We are an agile team that produces extraordinary results, setting the standard in safety, quality, productivity, and profitability. Employees act with a sense of ownership, take initiative to problem solve and is committed to the company's mission, their team and themselves. United Alloy is supportive and encouraging of our employees, we are able to help make their dreams become a reality. At UA, every employee matters to us. We want everyone to have their own success story in their personal and professional lives. It's one way that makes us an actively engaged team, inspired to win together. SUMMARY Under the direction of the QA Supervisor, the Quality Auditor provides support to production and the Quality Management System (QMS) by performing inspection activities to product processed at each stage of operations, ensuring quality specifications adhere to prints/drawing, inspections sheets and travelers. This position will also monitor product identification, calibration and ensure products meet the expectations of the customer. WHAT YOU'LL DO * Product testing and Inspection (Visual, Dimensional, Pressure decay, Vacuum decay, etc.…) * Cross Checks of product at each stage of operations to prints/drawings, traveler, inspection sheets, Control Plan and Visual Criteria * Issue gauges to employees and ensure gauges are calibrated and properly identified * Collection and data entry of inspection results and/or quality records * Monitoring of gauge inventory and other quality supplies * Identification and reporting of nonconforming product. * Ensure product is inspected or tested according to the inspection protocol or plan * Training of quality expectations to operations personnel when changes to the inspection process have been changed * Assists with the plant wide communication of Quality Alerts or Quality concerns * Has the authority to stop production when nonconforming parts are detected * Assists members of the Quality Department as needed and as time permits * Other duties as assigned WHAT YOU'LL NEED * High school diploma or general education degree (GED) required. * 20/20 vision in at least one eye and must not be color blind required (Magnifying lenses (readers, cheaters, etc..) are allowed if the employee normally uses them to read) * 2-3 years of experience in a related Quality Function * The individual must have a solid understanding of metal fabrication concepts and processes. * The individual must possess a keen sense of attention to detail * Must be able to determine material types and gauges. * Can read and interpret blueprints * Must be able to navigate in a Windows based computer environment * Experience with Microsoft Office, including Outlook, Excel, and Work * Excellent verbal and written communication skills * Must be able to regularly lift and/or move up to 25 pounds, frequently lift and/or move up to 50 pounds, and occasionally lift and/or move 100 pounds with an assist * 12 Expected Behaviors of Actively Engaged Person - 100% Responsible, Trustworthy, Team Player, Clear Communicator, Empathy, Humility, Emotional Self-Control, Resolves Conflict Directly, Positive Attitude, Respects Others, Problem Solver, and Agile. BENEFITS In addition to excellent starting wages, we offer a competitive compensation and benefits package as well as numerous perks. * Medical, dental and vision * Generous RTO and Vacation policy * 401(k) with company match * Bonus opportunities * Paid training * Company paid holidays * Earn a competitive salary and performance-based bonuses NOTE: Given the nature/size of our product and customer requirements, we require a stringent hiring process to ensure the highest quality product. Qualified candidates must successfully complete: Basic Skills/Measurement Test | Blueprint Reading Test | Pre-Employment Physical & Drug Screen Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Ability to stand, sit, walk, bend, twist, stoop, pull, push, assemble, and carry for extended periods of time. Ability to lift and/or move up to 25 pounds regularly, frequently lift or move up to 50 pounds and occasionally lift and/or move up to 100 pounds with an assist. Work Environment: Ability to perform in a manufacturing environment that may have high noise levels, dust, chemicals, oil, and grease. Ability to work in an environment that may be either hot, cold or humid.

Do you think you can MAKE THE CUT? Apply today to join our team! Kett Tool Company has a long standing history in the production and manufacturing of specialty power tools in Cincinnati, Ohio since 1940. From our product line of shears, saws, and nibblers, we provide quality and power to contractors, builders, and manufacturers across a multitude of industries. With over 70 years of experience, we make tools that you will find nowhere else. Our Mission Our people and our customers are our priority. Through innovation, service, and a focus on quality we strive to deliver the best product and experience. Culture We promote an employee-first culture where you are appreciated, valued, and empowered to work together to promote our corporate mission. The Kett Tool brand and our team stand for integrity, accountability, and impact. We Want You Are you ready to make an impact? If you challenge yourself to grow and learn every day, we want you. Do you want your ideas to promote innovation? If you are excited about improving processes and thinking outside of the box, we want you. Are you a team player? If you work well with others and enjoy a collaborative workplace and culture, we want you. Do you say what you mean and mean what you say? If you conduct yourself with honesty, integrity, and accountability, we want you. Benefits/Offerings All full time employees are eligible for our benefits program. Benefit offerings include: Medical Vision Dental 401K Paid Medical Leave Policies Education Assistance Program Company Sponsored Short Term Disability, Long Term Disability, and Life AD&D coverage Personal and Vacation Time Job Title: Quality Inspector II Department: Quality Reports to: Quality Engineer FLSA Status: Non- Exempt Purpose The purpose of the Quality Inspector II is to perform inspections on incoming and in-process materials/components to verify that such meet required quality specifications. Manage data input and review non-conformance of product and handle appropriately. Primary responsibilities Inspect and measure incoming materials/components using established quality standards and documentation for each part Inspect and measure start up and in-process components using established quality standards and documentation for each part Read blueprints and instructions to comprehend the quality expectations for the product and supplies Approve or reject parts based on quality requirements Assist Quality Engineer in performing First Article inspections as needed Assist Quality Engineer and other engineering/management personnel in identifying in-process or supplier trends Assist Quality Engineer and other engineering/management personnel in identifying opportunities for improving processes and procedures related to quality and material flow Responsible for maintaining a safe work environment Maintain inspection records using spreadsheets or databases Provide input on how to better processes and material flow with a LEAN manufacturing mentality Makes certain that parts are moved and stored in a safe manner during inspection Nonconformance and disposition of nonconformances Assist Quality Engineer in administration of gage/instrument calibration program Competencies and Skills Certified Quality Inspector Certification through American Society for Quality is preferred Ability to learn, understand, and effectively apply sampling plans Experience with a broad range of machine parts Ability to improvise measuring techniques when required Excellent attention to detail with a quality mindset Self motivated and able to work with minimal supervision Ability to work in a team environment Willingness to take further technical training in areas required to improve job skills when necessary Ability to use computer or tablet to process transactions Ability to read and interpret mechanical drawings, industry specifications and work instructions Basic knowledge of measuring instruments such as calipers, micrometers, bore micrometers, height gauges, etc. Physical Demands and Work Environment The physical demands and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the primary responsibilities of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is mostly in a sitting position but will occasionally be required to walk and lift up to 50 lbs. Occasionally required to climb, balance, stoop, kneel, crouch, and walk. Occasionally move up to 100 pounds using a pallet jack. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, color vision and ability to adjust focus. While performing the duties of this job, the employee is occasionally exposed to wet and/or humid conditions, fume or airborne particles. The employee is frequently exposed to moving mechanical parts. The noise in the work environment is moderate to loud. The primary responsibilities of this job involve working in a warehouse facility with exposure to both heat and cold. Other Duties This job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Kett Tool Company, a division of Endurance Industries, is an equal opportunity employer: qualified applicants are considered for and treated during employment without regard to race, color, creed, religion, sex, national origin, citizenship status, disability status, protected veteran status, age, marital status, sexual orientation, gender identity, genetic information, or any other characteristic protected by law. If a qualified individual with a disability or disabled veteran needs a reasonable accommodation to use or access our online system, that individual should please contact us at ************

The Quality Inspector is an entry-level position responsible for performing inspections on final products, assisting with the development of weld and assembly work instructions, and supporting the administration of weld qualification tests. This role works closely with experienced quality staff, production teams, and supervisors to ensure products meet company standards and customer requirements.Key Responsibilities Inspection Perform visual and dimensional inspections of final products using basic measuring tools (tape measures, calipers, gauges). Verify that parts and assemblies meet engineering drawings, specifications, and quality standards. Record inspection results and report non-conformances to the Quality Manager or supervisor. Assist in re-inspecting corrected items to confirm they meet requirements. Work Instructions Help create and update simple weld and assembly work instructions under the guidance of senior staff. Take photos and document production steps for clarity in work instructions. Assist in organizing and maintaining work instruction files for easy access by production staff. Weld Exam Support Assist in scheduling and setting up welder qualification and requalification tests. Help maintain basic records of welder certifications. Support the Quality Manager in distributing and collecting test materials. General Quality Support Maintain cleanliness and organization in inspection and testing areas. Participate in basic quality training to develop skills in inspection techniques and standards. Support other quality-related projects as assigned. Qualifications Required: High school diploma or equivalent. Strong attention to detail and accuracy. Basic math skills and ability to use a tape measure and hand tools. Willingness to learn welding symbols, inspection methods, and quality standards. Ability to follow written and verbal instructions. Preferred (but not required): Experience in a manufacturing or fabrication environment. Familiarity with welding processes or shop drawings. Basic computer skills (Word, Excel, email). Physical Requirements Ability to stand, walk, bend, and perform inspections for extended periods. Lift and carry up to 40 lbs as needed. Work in a manufacturing environment with exposure to welding, grinding, and assembly operations. Work Environment This role will work primarily on the manufacturing floor with some office time for documentation and training. Safety equipment will be provided and must be worn when required.

Location: Fairfield, OH Employment Type: 3rd Shift, Full-time, direct hire Job Brief Kable Workforce Solutions is hiring a Quality Inspector for our client. This job involves conducting lab tests using equipment such as Hot Set, Melt Index, Optical Comparator/Shadowgraph, calipers, and micrometers to support corrective and preventive action processes. You'll test materials and products, generate Certificates of Analysis, close internal NCRs, audit production processes, and review incoming raw material COAs/COCs.What's a Typical Day Like? Support the corrective and preventive action process by conducting lap tests (Hot set, Melt Index, Optical Comparator / Shadowgraph, Calipers, Micrometers) and other lab equipment as needed. Test materials and products and create COAs Facilitate the closure of internal NCRs. Audit the production process. Review and approve incoming raw material COA's / COC's. Assist in calibration compliance & equipment verifications. Collect and compile quality data. Assist in the development of test methods and inspection plans. Train the production team on quality control measures to improve product excellence What Are the Requirements of the Job? Minimum 3-5 years of related experience in Quality inspection. Previous manufacturing experience. High School Diploma or Equivalent required. Quality Inspection & Auditing experience. IATF 16949 Experience - preferred. Computer Software (Microsoft SharePoint, Suite, Minitab, etc.) Basic understanding of inspection equipment (Hot set, Melt Index, Optical Comparator / Shadowgraph, Calipers, Micrometers) and other lab equipment as needed. Ability to work in fast-paced environment. Ability to move or lift up to 50+ lbs. Ability to reach, grasp, hold, push, pull, bend, twist, squat, climb, kneel. Ability to utilize hand/eye coordination. Capability to stand for prolonged periods of time Communication skills. How to Apply And Next Steps? Please submit your resume in our application by clicking “apply now.” We look forward to reviewing your application and you will hear from us within 1 business day.About Kable Workforce Solutions For over 50 years, Kable Workforce Solutions has been connecting skilled professionals with leading employers across the region. We're dedicated to helping people build lasting careers and helping companies grow through quality, integrity, and partnership.We believe in people first - empowering individuals to succeed and celebrating the work that drives our communities forward.Kable Workforce Solutions is proud to be an equal opportunity employer. We welcome and value diversity and are committed to creating an inclusive workplace where everyone can thrive. Read our full diversity statement here.This job description is not intended to be all-inclusive, and the employee will also perform other reasonably related business duties as assigned by the immediate supervisor and other management as required.

CTL Aerospace is a full service NADCAP certified composite-manufacturing company providing services to the major aerospace and governmental organizations since 1946. CTL specializes in the manufacturing of Fiber Reinforced Polymer Structures. We are seeking a talented Quality Control Inspector to work in a fast-paced, team-oriented environment at our northern Cincinnati, Ohio location (less than 30 minutes from Dayton and/or northern Kentucky). Essential Job Functions Meets or exceeds all criteria for Quality Control Inspector I Perform dimensional/visual inspections on components and final assemblies using monitoring and measuring equipment (M&ME) according to production schedule Must comply with internal quality system, business policies, and regulatory requirements and supports business goals and objectives Work with others in a teamwork atmosphere Maintains work-station cleanliness on daily basis Experienced reading and understand blueprints, travelers/routers, and work instructions Can utilize basic shop math skills to aid with tolerancing and obtaining measurements of product Basic knowledge of GD&T tolerancing Basic understanding of utilizing an ERP system Experience with generating inspection reports and FAI reports Ability to Multi-task Basic Understanding in issuing Nonconforming Reports Capable of working with minimal supervision to support manufacturing needs Perform other duties as assigned Qualifications HS Diploma or equivalent. Minimum 2 yrs. experience related to precision manufacturing and inspection (Aerospace Industry with emphasis on composite manufacturing a plus) Ability to interact with people on the floor, good social skills, and able to work with diverse work groups Good analytical, writing and communication skills Must be a US Citizen Must be able to work in a manufacturing environment and lift up to 50 lbs. CTL Aerospace will provide a pay rate commensurate with experience and an excellent benefits package. To learn more about our company, please visit **************************** To be considered please e-mail or fax your resume and salary requirements to: Human Resource Department ******************* Fax: ************ CTL Aerospace is an EEO/M/F/Disability/VET and Drug Free Employer Veteran Founded Small Business

We are hiring and looking for a talented individual with hands-on experience in a QC role for a job shop/manufacturing environment position. Must have experience with quality inspections, blue prints, in process inspections, first article inspections, final inspections, and much more! Requirements Must have 3 yrs + QC experience working in a manufacturing environment Must have 3+ years of experience with measuring instruments such as micrometers, V-blocks, sine bars, calipers, dial indicators, angle plates, snap gauge, gauge blocks, height gage, level protractors, optical comparators, bore gages, etc. Faro Arm/Laser experience is highly preferred Must have very solid GD&T and math aptitude Must have a great work ethic, collaborative, team player Must have strong blue print reading skills Born in US, or INS certificate of naturalization REQUIRED Thanks for your interest in Magna Machine! EEO Disabilities/Veterans

Aerospace QC NDT Inspector Overall Summary of Job Quality Control Inspector's role is to ensure all repairs and operations are in compliance with FAA /EASA / ISO / AS and company's guidance. This individual has the responsibility and authority to carry out assigned tasks. Essential Functions Ensure company procedures and FAA/EASA /ISO/AS Standards are followed, records maintained, forms and required paperwork. Ensure all repairs are in compliance with FAA regulations. Control and maintain technical documents and publications. Perform calibrations, read and interpret blueprints and specifications. Initiate and participate in corrective actions, rework problem solving and audit processes. Perform dimensional / visual inspections using standard inspection gages and CMM Perform FPI and UT inspections Promote an attitude to serve the customer, instilling a sense of urgency throughout the Inspection Department Minimum Qualifications: Graduation from high school and Technical School and three years of experience minimum in a variety of trades or any equivalent combination of education and experience which would provide the required knowledge, skills, and abilities. Ability to work from sketches, drawings, and blueprints. Ability to follow oral and written instructions and to communicate effectively. Complete understanding of current NDI procedures. Ability to work cooperatively with others. Excellent work history and attendance record. Pre-employment drug screen required.

TRIGO Global Quality Solutions has several immediate openings for Quality Inspectors in Bellefontaine, OH. 1st shift only. Sit Down job. Payrate is $14.00. Overall Purpose of the Quality Inspector Provide Quality services and support for all missions assigned to a manufacturing or warehouse site while ensuring a healthy and safe work environment. Reports to Site Supervisor/Site Leaders Responsibilities (To include but not limited to the following) Client Relationship & Business Development * Act as an impartial third party between the production source and the customer facility to ensure the product meets set criteria Operations * Check/inspect manufactured parts or products for defects * Read and follow work instructions and general processes * Use measuring or testing equipment as needed * Ensure products meet quality standards * Display excellent customer service * Must comply with local and company Health & Safety legislation, laws, and policies Organization & Management * Collect and record data Technical * Utilize company portal for time recording and policy acknowledgements Other * Any other duties as assigned Knowledge, skills, abilities Hard skills * Must be able to speak and read in the English language * Good communications skills * Must be able to multi-task * Ability to work in a fast-paced environment * Ability to handle sensitive and confidential material * Ability to walk and stand for long periods of time * Ability to bend, lift, twist and move freely * Ability to periodically lift/move up to 50 pounds * Must have reliable transportation Values & attitudes Global team spirit * Team player * Caring for people * Open-minded Excellence * Reactive * Resilient to pressure * Rigorous Customer focus * Client oriented * Reliable & trustworthy * Flexible Initiative * Autonomous * Innovative * Daring Work experience Overall recommendations * No experience necessary * Ability to read blueprints a plus Education background Overall recommendations * High School Diploma or Equivalent recommended or comparable work experience About TRIGO Global Quality Solutions Founded in 1997, TRIGO is a multinational company providing operational Quality Management solutions for the manufacturing sector, especially in the automotive and aerospace industries. With a team of more than ten thousand professionals present in 20+ countries across 4 continents, TRIGO offers a comprehensive portfolio of Quality Assurance services ranging from inspection to expert auditing, consulting and training. The unrivaled expertise, industrial mindset and extensive global footprint that TRIGO has built up over the last 3 decades has made TRIGO the leading quality solutions provider using the latest innovative and reliable digital systems and standard processes, delivering results in the most demanding industries. TRIGO has recently started to expand its clientele by offering quality services to the medical, chemical and food industries. TRIGO Global Quality Solutions is committed to the core values of equal employment opportunity. We are committed to treating people fairly, and with respect and dignity. We offer employment opportunities based upon an individual's qualifications and performance, free from discrimination or harassment because of race, ancestry, place of origin, ethnic origin, color, citizenship, creed, sex, sexual orientation, age, marital status, family status, and disability.

Job Title: Fire Protection QC Inspector - Kitchens & Fire Extinguishers Location: Cincinnati, OH Silco Fire & Security isn't just a company, it's a mission. Every day, our team plays a vital role in protecting lives and property for over 45,000 businesses across Ohio, Kentucky and surrounding states. We design, install, maintain and monitor fire protection and security systems that keep people safe and businesses compliant. As the market leader in the Midwest, Silco is a growing, family-owned company with over 400 employees working from our headquarters in Cincinnati and branches in Dayton, Columbus, Toledo, Akron, Cleveland and Louisville. Recognized as a Top Workplace and named to the Inc. 5000 list of fastest-growing private companies, we have a long-standing track record of success and ambitious goals for the future. Our impact extends beyond fire alarms and sprinklers. We provide peace of mind to the communities we serve. At Silco, you're not just doing a job, you're making a difference. Position Overview: We are seeking a highly skilled and experienced Quality Control Inspector with a minimum of 5 years of expertise in the fire protection industry. The ideal candidate will play a crucial role in ensuring that our products and installations adhere to the highest standards. Responsibilities: Conduct Quality Inspections: Performing Quality Checks on inspections that have been performed on Kitchen Fire Protection Systems and Fire Extinguishers Ensure that inspections and installations comply with state and NFPA codes and regulations. Documentation and Reporting: Maintain detailed records of inspection findings, documenting any deviations or non-compliance issues. Generate comprehensive reports daily that will be distributed to employees and their managers. Collaboration: Work closely with Operation Managers, Supervisors, and service and installation teams to address quality concerns, provide guidance on corrective actions, and improve our quality standard. Provide consultations with techs and suggested follow up training when needed. Continuous Improvement: Participate in the development and implementation of quality control procedures and protocols. Identify opportunities for process improvements to enhance overall efficiency and effectiveness. Training and Development: Provide training to inspection teams on quality control standards, best practices, and regulatory requirements. Stay informed about industry advancements and changes in codes and standards. Qualifications: Minimum of 5 years of experience within the fire protection and life safety systems industry. Experience with Kitchen Suppression Systems and Fire Extinguishers is preferred. In-depth knowledge of relevant codes and standards (i.e. NFPA, local building codes). Strong attention to detail and excellent analytical skills. Ability to work independently and collaboratively within a team. Benefits: In addition to a competitive compensation package, Silco offers a wide range of benefits such as medical, dental, vision, Aflac and a Flexible Spending Account (FSA). Silco offers company paid short-term disability and life insurance, as well as company paid training. The Company also boasts a 401(k) program with company matching and tuition reimbursement. Silco provides paid holidays and generous paid time off. Employment at Silco is contingent upon completing and passing a background check and drug screen. Silco is an Equal Opportunity Employer.