Quality technician jobs in Daytona Beach, FL - 82 jobs

What Product Test & Calibration contributes to Cardinal Health Manufacturing is responsible for cost of production and maintenance activities including process improvement, supply chain management, quality assurance, employee safety and engagement, and environmental commitment. Product Test & Calibration sets up, aligns, monitors, and/or calibrates production equipment. Assists and may perform maintenance on machines and cleans up minor chemical spills in assigned area as well as glassware, ovens, and other equipment. Responsibilities * Maintains simple machines and performs general trouble shooting. * Conducts quality checks on the finished products. * Operates simple machines that produce products. * Documents applicable information regarding product quality and machine performance. * Sets up and calibrates machines as necessary. Qualifications * 3-5 years of experience, preferred * High School diploma, GED or equivalent, or equivalent work experience, preferred What is expected of you and others at this level * Applies acquired knowledge and skills to complete standard tasks * Readily learns and applies new information and methods to work in assigned area * Maintains appropriate licenses, training and certifications * Works on routine assignments that require some problem resolution * Works within clearly defined standard operating procedures and/or scientific methods * Adheres to all quality guidelines * Works under moderate degree of supervision * Work typically involves regular review of output by work lead or supervisor * Refers complex unusual problems to supervisor Anticipated hourly range: $20.25 - $26.25 per hour based on experience (includes shift differential) Bonus eligible: No Benefits: Cardinal Health offers a wide variety of benefits and programs to support health and well-being. * Medical, dental and vision coverage * Paid time off plan * Health savings account (HSA) * 401k savings plan * Access to wages before pay day with my FlexPay * Flexible spending accounts (FSAs) * Short- and long-term disability coverage * Work-Life resources * Paid parental leave * Healthy lifestyle programs Application window anticipated to close: 1/17/2026 *if interested in opportunity, please submit application as soon as possible. The hourly range listed is an estimate. Pay at Cardinal Health is determined by multiple factors including, but not limited to, a candidate's geographical location, relevant education, experience and skills and an evaluation of internal pay equity. Candidates who are back-to-work, people with disabilities, without a college degree, and Veterans are encouraged to apply. Cardinal Health supports an inclusive workplace that values diversity of thought, experience and background. We celebrate the power of our differences to create better solutions for our customers by ensuring employees can be their authentic selves each day. Cardinal Health is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, ancestry, age, physical or mental disability, sex, sexual orientation, gender identity/expression, pregnancy, veteran status, marital status, creed, status with regard to public assistance, genetic status or any other status protected by federal, state or local law.

Job Description Kingspan Insulated Panels North America, a division of the Kingspan Group Plc headquartered in Ireland, is a global and trusted leader in the design, manufacturing, and supply of high-performance sustainable building products and solutions for the construction industry. As the most energy-efficient, cost-effective building envelope solutions, insulated metal panels are at the forefront of sustainability. We serve the architectural, commercial/industrial, cold storage and food processing markets, and are committed to delivering the most advanced building products on the market. Learn about our Planet Passionate initiatives: ******************************************* At Kingspan, our future success is based on the quality of our people, who's expertise and motivation have helped ensure that we remain at the forefront of the construction materials manufacturing industry. In joining Kingspan you become an important part of a growing organization with a reputation for innovative design and use of technology, technical expertise, product quality, service excellence, and dedication to sustainability. Ready to be part of our team? Pay rate $19.50 3rd Shift We are looking for a Quality Technician Lead for our DeLand, FL facility. Summary: Maintain quality control objectives and execute quality control procedures while working in strong cooperation with other departments. Essential Duties: • Audits work stations and inspects finished product. • Works in close cooperation with production personnel under minimal supervision. • Identifies, disposes of, and escalates quality issues. • Works on containment and corrective actions. • Tests incoming raw materials. • Carries out periodic in-process checks. • Records and reports issues and test results, ensuring records are accurate. • Participates in quality meetings. • Participates in periodic operator cross-training and continuous improvement projects. • Executes other procedures as required. • Occasionally carries out field service repairs. • Responsible for the maintenance of ISO 9001-relevant activities. • Ensures containment and documentation of non-conforming materials. • Follow the Group Code of Conduct and Group Compliance. • Follow Compliance requirements per “KNA-SOP-1705 Compliance Roles and Responsibilities.” • Performs all other duties as assigned. Education/Experience: • 1+ years of manufacturing experience required. • Quality control experience is preferred. • High school Diploma or equivalent preferred. Skills and Other Requirements: • Detail-oriented and able to display good organizational skills. • Ability to work and communicate cohesively with both Management and production associates. • Good problem-solving abilities and hands-on technical skills. • Experience with Microsoft Office (Word, Excel, PowerPoint, and Outlook) preferred. • Fork truck experience or ability to train & become certified. • Ability to work at heights above 4 feet. • Ability to work independently Physical Demands: The physical demands described here represent those required to successfully perform the essential functions of this role. Reasonable accommodations may be made to enable individuals with disabilities to perform key responsibilities. • Body Movement & Posture: Standing or walking for extended periods, frequent bending, stooping, crouching, or kneeling, climbing stairs or ladders, crawling, or working in confined spaces. • Manual Dexterity & Handling: Using hands and fingers to grasp, manipulate, or assemble objects, operating machinery or tools with precision, repetitive motion tasks (e.g., packaging, sorting). • Strength & Lifting: Lifting and carrying materials (often 25-50 lbs.). Pushing or pulling carts, pallets, or equipment. Adjusting body movements to match the pace of moving objects. • Sensory Requirements: Near and far visual acuity for spotting defects or reading gauges. Hearing alarms, instructions, or machinery sounds. Peripheral vision for monitoring surroundings. • Cognitive & Environmental Factors: Maintaining focus in noisy or fast-paced environments. Performing tasks independently or in teams. Exposure to heat, cold, dust, or chemicals, depending on the facility. We offer a comprehensive benefits package including 401k with company match, Medical, Dental, Vision, Identity Theft Protection, Critical Illness, Accident, Hospital Indemnity, Pregnancy and Parental Leave, Fitness Reimbursement, Educational Assistance, Life, AD&D, Short- and Long-Term Disability, and Life Assistance Program. Kingspan is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to any factor, including veteran status and disability status, protected by applicable federal, state or local laws.

Job DescriptionProduction Quality TechnicianThe Production Quality Technician plays a key role in ensuring the consistency, safety, and compliance of all manufactured products and processes. This position focuses on quality assurance for batch-manufactured products, incoming raw materials, packaging, labeling, outgoing shipments, product testing, and internal processes - all in alignment with ISO 9001:2015 and the company's Quality Management System (QMS). A strong quality mindset, excellent teamwork, communication skills, and attention to detail are essential for success in this role.Key Responsibilities • Develop a thorough understanding of all processes related to product manufacturing, identification, packaging, shipping preparation, and quality assurance for all products and materials. • Gain comprehensive knowledge of all product lines, documentation standards, and the EBS Quality Management System (ISO 9001:2015). • Perform quality testing, inspections, and reporting on both products and incoming materials. • Prepare, review, and correct Certificates of Analysis and other quality-related documentation. • Record test results and production data; utilize statistical software, data analysis techniques, and SPC charting to monitor and improve performance.• Safely handle, weigh, and transfer hazardous materials from bulk containers for use in production.• Perform calibration, verification, and maintenance on all equipment; monitor and record process and environmental data; prepare reports for management and regulatory agencies.• Maintain a compliant, organized laboratory notebook in accordance with intellectual property protection standards.• Investigate non-conformances and implement corrective and preventive actions. • Support continuous improvement and maintenance of the Quality Management System (QMS) by writing, reviewing, and updating procedures and documentation. • Maintain a clean and safe work environment; consistently adhere to all safety policies and protocols. Qualifications· • Associate degree or higher preferred; equivalent experience or certifications may be considered.· • Strong understanding of mathematics and statistics (beyond algebra).· • Proficiency with Microsoft Excel, Access, and Office Suite; experience with statistical or SPC software a plus.· • Strong mechanical aptitude and familiarity with basic hand tools.· • Excellent attention to detail and a commitment to product quality.· • Ability to read and follow Standard Operating Procedures (SOPs).· • Willingness to work overtime or weekends as needed, and adjust shifts to cover absences or vacations. Physical Requirements· • Ability to perform manual labor in hot, humid, or outdoor conditions as required.· • Work safely in environments with fumes, airborne particles, noise, and vibration while wearing proper Personal Protective Equipment (PPE).· • Physically capable of pushing or pulling objects over 100 lbs; lifting up to 70 lbs unassisted to chest height or on stairs; carrying 70 lb pails between work areas.· • Comfortable standing or walking for up to 3 hours, and able to stoop, kneel, crouch, bend, and twist as needed.· • Must have clear vision, including color recognition, depth perception, peripheral vision, and the ability to focus on fine details. E04JI800t97s4083npp

Join America's premier steel bridge fabricator! Veritas Steel's employees have been building America's bridges with American-made steel for more than 100 years. We specialize in complex bridges and structures of all shapes and sizes, whether arches, cable-stayed, suspension, bascule, or plate girders, we build it. Veritas is committed to providing employees with opportunities for training and professional development. If being a part of Building America's Infrastructure is something that interests you, then apply now! Relocation Assistance is available. Coordinate between Veritas Steel Production and DOT Inspectors to ensure DOT witnessing of production operations and QC hold points are being completed. * Perform visual inspection of material as required. * Perform layout checks as needed. * Perform rotational capacity tests on bolts prior to use in shop. * Work with outside inspectors to resolve quality issues on the floor. * Monitor welder qualification tests. * Monitor and record welding parameters to insure compliance to approved WPS. * Be able to read and understand the Welding code and Specifications. * Perform Dimensional checks on lay downs and shop assemblies. Use Total Station as needed. * Develop improvements in the quality control process to facilitate flow of work through shop. Primary Responsibilities: How will you accomplish the Objectives? * Conduct audits of Quality Management System * Perform in a manner that will assure quality work flowing through the shop. * Work with welders and leadmen to maintain quality. * Be available, by use of a radio, etc. to perform needed checks. * Maintain a log of work done, and complete required reports. * Interpret the Specifications and applicable Codes. * Ability to be flexible to work either early or late within assigned shift as needed. * Coordinate inspection of QC hold points between production and DOT Inspectors. * Use and encourage safe working habits. Competencies/Skills To perform the responsibilities, you must have the ability and skills to: * Effectively communicate with the crews, supervisors, and Quality Manager the results of your work, evaluate problems, proposed acceptable corrections, solutions, and schedules. * Ability to understand and interpret blueprints, use measurement tools and techniques to verify geometric tolerances of fabricated parts and assemblies. * Strong attention to detail and ability to make informed decisions based on project codes and specifications * Coordinate your work with shipping department to assure loads have been inspected and ready to ship. * Work with supervisors to plan your work and time in each shop to facilitate the flow of quality work through the shop. * General working knowledge of Total Station to assist crews as needed and finalize assemblies during off shifts as needed. * Positive attitude to promote team morale and ability to coach employees for improved quality of workmanship Measures of Success: Objective facts that demonstrate great performance. * Outstanding work record, great attendance record and always-on time. * No accidents. A safe worker is an asset to both their fellow worker and the company. * Increase throughput in the area that work being performed being able to streamline the required work and constantly making positive improvements. * Accept positive feedback from fellow workers and supervisors, on performance and competencies. Requirements - * Certified Welding Inspector Certification or ASNT VT Level II Preferred Qualifications - * ASNT MT Level II * ASNT UT Level II * NACE or SSPC BCI Level I * Fabrication Shop Background 2nd shift is 530pm to 530am M - Th, 4 day work week

Job Description At Curaleaf, we're redefining the cannabis industry with a strong commitment to quality, expertise, and innovation. As a leading global cannabis provider, our brands-including Curaleaf, Select, and Grassroots-offer premium products and services in both medical and adult-use markets. Join us at Curaleaf to be part of a high-growth, purpose-driven company that champions corporate social responsibility through our Rooted in Good initiative, supporting community outreach and positive change. Here, you'll have the opportunity to make a meaningful impact, drive innovation, and help shape the future of cannabis. Title: Production Technician Pay Rate: $ Location: Job Type: Full Time/Part Time | Non-Exempt Shift: [DAYS] | [SHIFT] Who You Are: You're a hands-on production pro who thrives in a fast-paced, quality-driven environment. With an eye for detail and a steady focus on consistency, you take pride in packaging and labeling premium cannabis products-from dried flower and pre-rolls to vape cartridges, pens, and infused items. You enjoy working with clear procedures, following safety and compliance standards, and collaborating with teammates to keep operations running smoothly. Your reliability and commitment to accuracy ensure every finished product meets Curaleaf's high standards before it reaches our customers. What You'll Do: As a Production Technician at Curaleaf, you'll play a key role in delivering high-quality cannabis products by supporting every stage of the packaging process. In this fast-paced, hands-on role, you will: Stage products and packaging materials across production lines while performing quality assurance checks to meet daily schedules and Curaleaf's high standards Boost operational efficiency and minimize waste by taking ownership, collaborating with the team, and communicating effectively Conduct in-process and final quality checks, including testing, visual inspections, and precise weighing, while maintaining 100% compliance in data recording, product tracking, and secure packaging Work quickly and efficiently to boost productivity while keeping the extraction room organized, clean, and inspection-ready Operate efficiently while following OSHA standards, Curaleaf SOPs, and all required procedures, ensuring every product is accurately labeled and fully compliant with state regulations What You'll Bring: You are eager to learn and can be trained on various production equipment and SOPs while consistently meeting performance expectations set by leadership You bring strong attention to detail and effective communication skills, thriving in a fast-paced, team-based production environment You can comfortably perform repetitive tasks with focus and consistency over extended periods You have a strong work ethic, are punctual and reliable, and help maintain a positive, professional team environment You have a high school diploma, GED, or equivalent Even Better If: You have at least one year of manufacturing or packaging experience focused on product safety, consumer satisfaction, and delivering high-quality results Physical Requirements Ability to stand, sit, and walk for extended periods of time (8-10 hours per shift) Ability to lift and carry up to 50 pounds regularly and occasional lifting of heavier items with assistance Frequent and repetitive use of hands and wrists for extended periods of time Repetitive bending, squatting, and reaching Ability to climb ladders or step stools to access plants or equipment Ability to use required PPE when required, such as masks, hair nets, beard covers, respirators, boot covers, scrubs, non-slip shoes, and Tyvek suits as necessary Environmental Conditions Exposure to environments with high humidity, varying temperatures, and strong odors (such as cannabis) Exposure to soil, water, fertilizer, dust, pollen and plant pathogens Exposure to cleaning solvents, such as high volumes of isopropyl alcohol Exposure to loud noises, including but not limited to air compressors, packaging equipment, and alarms Exposure to CO2 manufacturing procedures at OSHA approved CO2 levels Curaleaf Pay Transparency$15-$15 USD What We Offer: Career Growth Opportunities Competitive Pay and Benefits Generous PTO and Parental Leave 401(K) Retirement Plan Life/ Disability Insurance Community Involvement Referral Bonuses and Product Discounts Benefits vary by state, role type, and eligibility. Follow us on Social Media: Instagram: @curaleaf.usa Twitter: @Curaleaf_Inc LinkedIn: Curaleaf LinkedIn Curaleaf Holdings, Inc. (TSX: CURA) (OTCQX: CURLF) ("Curaleaf") is a leading international provider of consumer products in cannabis with a mission to enhance lives by cultivating, sharing, and celebrating the power of the plant. As a high-growth cannabis company known for quality, expertise and reliability, the Company, and its brands, including Curaleaf, Select, Grassroots, JAMS, Find and Zero Proof provide industry-leading service, product selection and accessibility across the medical and adult-use markets. Curaleaf International is the largest vertically integrated cannabis company in Europe with a unique supply and distribution network throughout the European market, bringing together pioneering science and research with cutting-edge cultivation, extraction, and production. Home | Curaleaf | Cannabis with Confidence Our Vision: To be the world's leading cannabis company by consistently delivering superior products and services and driving the global acceptance of cannabis. Our Values: Lead and Inspire. Commit to Win. ONE Curaleaf. Driven to Deliver Excellence. Curaleaf is an equal opportunity employer. Curaleaf recruits, employs, trains, compensates, and promotes regardless of race, religion, color, national origin, gender identity, sexual orientation, physical ability, age, veteran status, and other protected status as required by applicable law. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodation. Individuals adversely impacted by the war on drugs are encouraged to apply. Current Curaleaf employees should apply for open positions through our Internal Job Board, which can be accessed via the link on The Leaf.

Why Join Our Team? Joining Rinker means becoming a part of a team that's committed to making a positive impact. When you work with us, you're not just building structures; you're contributing to the growth and development of communities. As a Quality Control Technician, you will be responsible for quality control in all phases of production utilizing established procedures, quality control manuals, and equipment. Join our team and enjoy a comprehensive benefits package that includes competitive pay, a 401k match, paid vacation, holidays, employee discounts, and more. Why Choose a Career with Us? * Growth and Learning: We provide an environment that encourages personal and professional growth, helping you build a long-lasting, successful career. * Innovation: Be a part of a team that's shaping the future of construction and infrastructure. * Impact: What we build today will shape the world for generations to come. Your work here will be your legacy, impacting communities and leaving a lasting mark on the world. * Collaboration: We value collaboration and teamwork, knowing that the best solutions are born through shared knowledge and diverse perspectives. Join us and work with talented, like-minded professionals. About the Role: * Responsible for quality control in all phases of production utilizing established procedures, quality control manuals, and equipment * Read and understand shop fabrication drawings and specs and verify dimensions of product or material * Perform internal audits and maintain quality control inspection records * Act as liaison to outside inspectors * Resolve quality issues due to production and fabrication errors * Inspect finished good loads prior to plant departure * Coach and train the team in quality requirements Qualifications: * High School Diploma or GED. * 2 years manufacturing experience. Prior QC experience preferred. * Ability to read and interpret shop drawings and American Society for Testing and Materials (ASTM) specifications. * Ability to interpret readings from Micrometers, Calipers, and other QC tools. * Excellent communication and organization skills. We're always on the lookout for passionate individuals who are committed to Excellence and share our vision of a better future. If you're ready to take the next step in your career and contribute to some of the most exciting infrastructure projects, we invite you to explore our current job openings and start your journey with us. Ready to Apply? * The process is simple. Click on the "apply" button to get started.

Job Description Now Hiring: QA/QC Technician - Data Center Project (Montgomery, AL) Pay: TBD, based on experience Per Diem: TBD for qualified travelers Schedule: Full-time | Long-term project United Trades of America is currently hiring a QA/QC Technician for a high-profile data center construction project in Montgomery, Alabama. This is a critical role focused on ensuring quality, safety, and compliance across all phases of construction. If you are detail-oriented and experienced in quality assurance/control for industrial or commercial builds, we want to hear from you. Key Responsibilities: Perform inspections and testing of mechanical, electrical, or structural systems according to project specifications Monitor installation practices and ensure adherence to quality standards and safety protocols Maintain accurate and up-to-date QA/QC documentation, reports, and logs Collaborate with site supervisors, engineers, and subcontractors to identify and resolve deficiencies Ensure compliance with drawings, specs, ITPs, and applicable codes Document and report non-conformance issues and confirm resolution through corrective actions Qualifications: Minimum 3 years of QA/QC experience in commercial or industrial construction Experience with data centers or mission-critical projects is highly preferred Strong working knowledge of ITPs, submittals, RFIs, and construction documents Familiarity with construction codes, specifications, and jobsite safety requirements Proficient in Microsoft Office and QA/QC tracking tools Excellent communication and documentation skills OSHA 10 or 30 certification preferred Additional Requirements: Must provide own PPE and tools Must be able to pass a background check and drug screening How to Apply:

Certified and responsible for the inspection of canopy parts in one specific station, by utilizing, basic knowledge of company products, drawings, work instructions, procedures and quality system. Inspector I works under the immediate supervision of QA Team Leader, QA Supervisor or QA Manager. Essential Duties and Responsibilities Visually examines station appropriate material or product for defects. Compares station appropriate product with production work order. Verifies specified dimensions of station appropriate material. Rejects defective/nonconforming parts and incorrect/missing documentation on the traveler and routes it directly to the QA Lead/Supervisor/Manager. Working knowledge of engineering drawings, diagrams and Work Instructions. Performs other inherent duties related, but not limited, to the above. QA Inspection Certification Stations: Inspection Q Box The purpose of Q Box Inspection is to verify appropriate parts are contained within the kit, split the kit into sub-cell and cell components, and verify warning label, logos and other associated documentation correctness. Logo/Artwork Inspection The purpose of Logo/Artwork Inspection is to verify that the specifications are met as per the drawings and work instructions for the logo and artwork. Sub-Cell Inspection The purpose of Sub-Cell Inspection is to verify the appropriate line set, stabilizer, slider, bridle, tail pocket, link covers, flag bag, drogue and canopy bag have been prepped and manufactured to criteria and drawings for the associated job order. Light Table Inspection The purpose of the Light Table Inspection is to verify that incoming fabric meet Performance Designs specifications. Document, map and segregate non-conforming product from conforming material. Assist in stockroom duties associated with labeling and storage of fabric. Measure and prepare sales order fabrics. Inspection A Station The purpose of the Inspection A Station is to inspect station appropriate fabric, tape type and location on parts, center cell preparation, tape shrinkage and tape stitch quality before any seam work is put in the article to be produced. Arrange the parts for the next production operation. Verify documentation and Berry Amendment lot information. Inspection B Station The purpose of the Inspection B Station is to inspect the stitching in the main seamed sub-assembly, I-Beam Seam and Top Seam including PCA assembly. To verify tapes, logos, fabric and documentation including Berry Amendment lot information. Inspection C Station The purpose of the Inspection C Station is to inspect the loaded structure of the main bottom seam of the parachute before the tail seam is sewn or any bar tacks are placed. To verify that the junction of the tapes will accommodate the proper placement of the bar tacks. To inspect the stabilizers. To verify tapes, fabric and documentation including Berry Amendment lot information. Inspection D Station The purpose of the Inspection D Station is to inspect the tail seam, slider, stabilizers, all bar tacks, added components such as tail pockets, and rigging (including measurements). Verify tape type and placement, fabric, and documentation including Berry Amendment lot information. Final Inspection Station The purpose of the Final Airworthiness Inspection is to assure that the item being produced is free of defects. The assembly is checked for construction, completeness, and function. Once the parachute is deemed airworthy, it is packaged for shipping. Raw Product Mechanical inspection The purpose of the Raw Product Inspection is to verify received or other identified products meet Performance Designs specifications using mechanical and measuring equipment. Document and segregate non-conforming product from conforming material. Assist in stockroom duties as required to maintain fabric inventory and other raw product inventory. Calibration Technician The purpose of the Calibration Technician is to calibrate the tools and instruments used in quality control and production on a timely basis. The calibration technician must complete and maintain all documentation associated with the calibration process. Education and Experience Requirements High School diploma or GED Equivalent required. Previous inspection experience preferred Knowledge, Skills & Abilities Must be able to read, understand and follow written Standard Operating Procedure Specifications that are written in the English language. Ability to write in the English language. Ability to read and measure with a ruler and measuring tape Communicates thoughts in logical manner to peers and management. Must pass the Performance Designs, Inc. Light Industrial Test Physical Requirements Finger, hand and arm dexterity crucial for manipulating canopy parts. Visual acuity necessary for inspection of parts. Ability to lift materials weighing up to 50 pounds. Must have legible handwriting to complete required documentation. Must be able stand for extended periods of time. Must be able to stoop, bend and reach on a routine basis The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Are you passionate about ensuring products meet the highest quality standards? At Alleima's Business Unit Medical, we turn advanced materials and engineering expertise into solutions that change lives. Partnering with the world's leading medical device innovators, we design, develop, and manufacture components and medical solutions that push the boundaries of what's possible in medical technology, from continuous glucose monitors to cochlear implants. Every micron of wire, every braid of nitinol and every millimeter of tubing we produce helps patients live longer and healthier lives. Join us in shaping the future of healthcare, where innovation meets impact. We are on an exciting growth journey, with new manufacturing sites, strategic acquisitions, and a rapidly expanding global footprint. With production facilities in Germany, Poland, Italy, Malaysia and the USA, we are proud to be a truly international team Your Role: As a Quality Control Technician at Alleima, you will play a crucial role in maintaining our legacy of excellence. Your primary responsibilities will include: -Performing first piece, in process, and final inspections of products to verify compliance with specifications, including documentation. -Conducting functional and dimensional testing using appropriate tools and equipment. -Verifying documented inspection, test data, traceability information is accurate, and GDP is maintained. -Assisting in root cause analysis and corrective action implementation for non-conformances in conjunction with cross-functional teams. -Maintaining calibration and proper use of inspection and measurement instruments. -Supporting internal audits and regulatory compliance activities. -Collaborating with production and engineering teams to resolve quality issues promptly, including continuous improvement. About you: You are a dedicated individual with a high school diploma or equivalent, and preferably a technical certification or associate degree. With 1-3 years of experience in a quality control or manufacturing environment, you possess basic math and measurement skills, strong attention to detail, and problem solving abilities. Your ability to learn and follow detailed procedures, coupled with basic computer skills for data entry and reporting, makes you an ideal candidate for this role. You are comfortable working in a manufacturing environment, standing for extended periods, and lifting up to 25 lbs. Your dexterity to handle, inspect, and test fine wire ensures you can perform your tasks effectively. You have the ability to perform detailed visual inspections of fine medical wire and components, including detection of minute defects and accurate identification of color-coded materials, with or without reasonable accommodation, including corrective lenses. Additionally, the ability to accurately distinguish color-coded wires, markings, and indicators used in the inspection and quality verification process is important. You have an interest in quality control and continuous improvement, and familiarity with basic inspection tools like calipers, micrometers, and microscopes is a plus. As a team oriented and dependable individual, you will thrive in our collaborative environment, contributing to our cycle of innovation and advancement. What you can expect from us: A workplace built on care, for better healthcare, for our customers, and for each other. A culture that values unique, novel solutions and high-quality standards. Opportunities to contribute to medical innovations that make a real difference. A collaborative, decentralized environment where your voice matters. Competitive compensation, benefits, and global career development. Health, Dental, and Vision coverage after 30 days 401K with company contribution of 5% plus matching after 90 days 88 paid holiday hours per year Paid time off (up to 120 hours paid time off after one year) Additional information: Why Alleima, BU Medical? We don't just make components; we enable breakthroughs. Whether it's helping someone with diabetes live more freely or supporting the next generation of neurostimulation devices, our work is purpose-driven and technically sophisticated. Ready to Make a Difference? Join us and be part of a team that's shaping the future of medical technology. ***************

Pay: $20. 00 - $29. 00 per hour Job description: Job Title: Quality Control Inspector - Electronics Assembly Company: Liberty Sta ing USA Location: Apopka, FL Pay: Based on experience Schedule: Monday-Thursday, 6:30 AM - 5:15 PM (10-hour shifts); Friday overtime as needed Job Type: Full-Time | Temp-to-Hire Overview Liberty Sta ing USA is seeking a detail-oriented Quality Control Inspector for electronics assembly in Apopka, FL. The ideal candidate is IPC-A-610 certi?ed and experienced in inspecting PCBs, cable assemblies, and box builds. This role ensures that all assemblies meet customer speci?cations and industry quality standards. Key Responsibilities ? Inspect electronic assemblies thoroughly per customer speci?cations and IPC standards. ? Perform ?nal inspections on PCB, box build, and cable assemblies prior to shipping. ? Read and interpret customer drawings, BOMs, and assembly instructions. ? Conduct First Article Inspections (FAI) at all stages of production. ? Verify SMT machine setups and perform solder paste audits before production. ? Conduct daily in-process audits across all departments. ? Use a microscope for precision electronic part and solder inspection. ? Hand solder to support rework or inspection when needed. ? Complete and maintain inspection and shipping documentation for outgoing assemblies. Quali?cations / Skills ? Minimum 1 year of experience in quality control / inspection of electronic assemblies. ? High School Diploma or equivalent. ? IPC-A-610 Certi?cation required. ? Pro?cient in microscope use for precision inspection. ? Knowledge of hand soldering techniques is a plus. ? Strong attention to detail and commitment to quality standards. Why Work With Liberty Sta ing USA? ? Competitive pay based on experience. ? Full-time, long-term, temp-to-hire opportunity. ? 4-day workweek with overtime opportunities on Fridays. ? Supportive team environment and opportunity to grow in the electronics manufacturing ?eld. Keywords for Visibility: Quality Control Inspector, Electronics Inspector, IPC-A-610, PCB Inspection, Cable Assembly, Box Build, SMT Inspection, Hand Soldering, Electronics Assembly, Apopka Jobs, Liberty Sta ing USA Careers, In-Process Audit, Final Inspection Apply today to join Liberty Sta ing USA as a Quality Control Inspector and advance your career in electronics assembly in Apopka, FL! Job Type: Full-time Bene?ts: ? Dental insurance ? Health insurance ? Vision insurance

Founded in 1954, Vibrant Ingredients is a leading provider of natural, clean label ingredients and systems that power extraordinary food and beverage experiences. The company's broad portfolio - including natural flavors, botanical extracts, functional nutrition, cold brew coffee, tea essences, and food protection solutions - enhances taste, texture, color, shelf life, and performance across a wide range of applications. Vibrant operates four state-of-the-art facilities across the United States and works with leading brands, manufacturers, and foodservice operators. With vertically integrated capabilities and a proven track record of innovation and execution, Vibrant helps customers accelerate to market without compromise. About the role: We are a trusted partner to our customers when it comes to innovation and an industry leader in clean label ingredients, we are a true partner. We collaborate with our customers in ways that respect people and the environment. A commitment to Purely Better™ drives our innovation team to discover new, on trend solutions. As a QA Technician, you play a critical role in ensuring that all manufactured products meet stringent quality standards and comply with industry regulations. This position involves conducting detailed inspections, performing tests, and analyzing data to identify defects or deviations from specifications. The QA Technician collaborates closely with production teams to implement corrective actions and continuous improvement initiatives that enhance product reliability and customer satisfaction. By maintaining accurate documentation and reporting, the technician supports traceability and accountability throughout the manufacturing process. Ultimately, this role is essential in safeguarding the integrity of the manufacturing output and upholding the company's reputation for quality excellence. How will you contribute: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Reasonable accommodation may be made to enable qualified individuals with disabilities to perform essential job functions. Essential job functions and duties include, but are not limited to: Perform routine and non-routine inspections of raw materials, in-process components, and finished products to verify conformance to quality standards. Conduct various tests using precision measurement tools and equipment to assess product attributes such as dimensions, functionality, and durability. Document inspection results and test data accurately, maintaining detailed records for quality control and audit purposes. Identify, report, and track non-conformances or defects, working with production and engineering teams to facilitate root cause analysis and corrective actions. Participate in continuous improvement projects by providing quality data insights and recommending process enhancements to reduce defects and improve efficiency. Skills: The QA Technician utilizes their technical skills daily to perform precise measurements and inspections that ensure product quality. Proficiency with measurement instruments and the ability to interpret engineering drawings enable accurate verification of product specifications. Analytical skills are essential for identifying trends in quality data and supporting root cause investigations. Communication skills facilitate effective collaboration with production and engineering teams to implement corrective actions and improvements. Additionally, organizational skills are critical for maintaining detailed records and ensuring compliance with quality standards and regulatory requirements. Minimum Requirements/Qualifications: High school diploma or equivalent required; technical or vocational training in quality assurance or manufacturing preferred. Basic understanding of quality control principles and manufacturing processes. Experience using measurement tools such as calipers, micrometers, and gauges. Ability to read and interpret technical drawings, specifications, and quality documentation. Strong attention to detail and commitment to maintaining high-quality standards. Preferred Qualifications: Associate degree or certification in Quality Assurance, Manufacturing Technology, or related field. Experience with statistical process control (SPC) and quality management systems (QMS) such as ISO 9001. Familiarity with computerized quality inspection software and data entry systems. Previous experience in a manufacturing environment, particularly in the food and beverage industry. Strong problem-solving skills and the ability to work collaboratively in cross-functional teams. Work Environment: May involve exposure to allergens such as celery. What Vibrant Ingredients can offer you: Generous time off for vacations Paid Holidays 401(k) with company match Tuition reimbursement Medical/Dental/Vision Health & Wellness programs More about us: Vibrant Ingredients, headquartered in Lake Mary, FL, is one of the world's leading independent providers of natural ingredients. With a legacy spanning over 70 years, we deliver a diverse portfolio of clean label ingredients and innovative system solutions to the food and beverage industry. Our commitment to quality and performance is reflected in our American-made products, which enhance both taste and functionality. Backed by advanced manufacturing capabilities, we specialize in fermentation, patented cold brew extraction, custom flavor development, and a range of drying and blending technologies. Operating from four state-of-the-art facilities strategically located across the U.S., we ensure the accessibility of real, high-quality ingredients-helping our customers create better-for-you food and beverage for consumers. "Improving the food and beverages consumed by providing real ingredients from nature that work." This position is currently classified as on-site. Employees are eligible to participate in Medical, Dental, Vision, Life Insurance, 401(k), Holidays, Vacation, Tuition Reimbursement Program. The final salary offered for this position may take into account a number of factors including, but not limited to, location, skills, education, and experience. The Company reserves the right to modify, update, change and/or make corrections to this job description, at the sole discretion of senior management, at any time during the employee's employment term, at the sole discretion of management. EEO Statement Vibrant Ingredients is an equal opportunity employer committed to employing a diverse workforce and providing accommodations for people with disabilities in all parts of the hiring process as required under its Employment Accommodation Policy. Vibrant Ingredients will work with applicants to meet accommodation needs that are made known to Vibrant Ingredients in advance. **Please no external recruiters** 2nd Shift: 3PM to 11:30PM 3rd Shift: 11PM to 7:30AM

Precision CNC Manufacturer seeking experienced QC Inspector. The QC Inspector is responsible for inspection of incoming materials, in-process inspections of product and ensures tight tolerance machined parts meet the specifications of the drawings and the parts meet customer's quality standards. The Quality Control Inspector performs a variety of routine inspection procedures to ensure quality at various stages of production. Inspects in-process and/or finished parts and subassemblies for conformance to quality assurance standards. DUITIES: Being a CMM (Coordinate Measuring Machine) programmer with PCDMIS software requires a combination of technical knowledge and mechanical skills. Here are some important skills and qualifications for a CMM programmer: Qualifications: • High School diploma or equivalent • Minimum 5 years related experience, preferably in a similar environment • Strong knowledge of inspection tools, advanced shop mathematics and machine shop practices. • Mechanical inspection experience • Thorough knowledge of geometric tolerancing (GD&T) • Ability to work from blueprints, sketches and verbal instructions. • Strong computer skills. • CMM experience desired. • Team player and flexible with work assignments. These skills, combined with hands-on experience, are highly valued in the field of CMM programming with PCDMIS software. • Mechanical Skills & Capacity • Problem Solving - Identifies and resolves problems in a timely manner • Mathematical Skills - Proficient in shop math skills • Communication Proficiency - Writes clearly and informatively; Presents numerical data effectively; Able to read and interpret written information. • Judgment - Exhibits sound and accurate judgment; Includes appropriate people in decision-making process. • Quality - Demonstrates accuracy and thoroughness; Monitors own work to ensure quality. • Productivity- work in timely manner; Works quickly • Perform first article inspections. • Conduct random inspections throughout the day. • Immediately coordinate any problems with Quality Supervisor. BENEFITS: • State of the art equipment • Health insurance • Dental insurance • Vision insurance • Company Paid Life Insurance & Supplemental available • 401K • Vacation • Paid Holidays We are an Equal Opportunity Employer. Salary commensurate with experience. Type: Full-time

Full-time Description JE Technology Solutions, Inc., a designer and manufacturer of Aircraft Ground Equipment, is seeking a talented, experienced, and highly-analytical Quality Control Inspector to join our production department. As a Quality Control Inspector, you will uphold the safety regulations of our company and supervise the production process to guarantee that all our products meet quality expectations. The chosen candidate will perform regular product evaluations, record inspection results, and recommend improvements to the production process. To excel in this role, applicants should demonstrate great attention to detail with excellent technical and math abilities. Responsibilities: · Perform regular quality assessments on all incoming materials from vendors and outgoing products for shipping. · Reject all products and materials that fail to meet quality expectations. · Read drawings and specifications to understand the requirements of products and services. · Utilize tools such as eDrawings and Isometric Views on drawings to verify orientation of items during inspection. · Measure product dimensions, examine functionality and compare the final product to the specifications. · Recommend improvements to the production process to ensure quality control. · Document inspection outcomes by completing detailed reports. · Measure and record Quality Control related KPIs, such as First Pass Yield. · Communicate and confirm defects have been corrected with the production team. · Promote Quality-At-The-Source best practices to improve product excellence. · Ability to problem solve using tools like “ask five whys”. · Observe the production process. · Prioritize prompt response to production floor to ensure continuous flow of production. · Collaborate with the quality and manufacturing teams to resolve quality-related issues in a timely manner. · Participate in functional testing of products such as load testing, electrical testing, pressure testing, etc. · Ability to follow company Standard Operating Procedures and uphold Workmanship Standards. · Add occasional need to travel for field inspections including military bases. Requirements High school diploma or equivalent qualification. Certification in quality control is preferred. A minimum of 2 years' experience in a similar role. Excellent knowledge of MS Office. Good math and technical skills. Strong understanding of quality control standards and testing techniques. Willing to work shift from 5:00 a.m. to 3:30p.m., 4 days/week. Preferred Skills: · Quality Inspection · Welding Inspection · Proficiency with inspection equipment, such as: o Tape Measure o Calipers o Dial Indicator o Multimeter o Pressure Gauges o Thread Gauges o Gauge Blocks · Familiarity with PCMM inspection equipment including probe and scanner attachments is a plus · Quality Control · Dimensional Inspection · ISO 9001:2015 Awareness · Experience with GD&T is a plus · Manufacturing Processes and Procedures · Familiarity with AS9100 is a plus · Experience with NDT and Magnetic Particle Inspection is a plus JE Technology Solutions, Inc. is a Drug Free Workplace. All offers of employment by JE Technology Solutions, Inc. are contingent on completion of a drug test within 2 business days of your offer acceptance and a background check with results in compliance with company policy. JE Technology Solutions, Inc. uses E-Verify to confirm employment eligibility for roles based in the United States. JE Technology Solutions is an Equal Opportunity Employer. All applicants will receive consideration for employment without regard to race, color, religion, sexual orientation, gender identity, national origin, veteran or disability status.

Join America's premier steel bridge fabricator! Veritas Steel's employees have been building America's bridges with American-made steel for more than 100 years. We specialize in complex bridges and structures of all shapes and sizes, whether arches, cable-stayed, suspension, bascule, or plate girders, we build it. Veritas is committed to providing employees with opportunities for training and professional development. If being a part of Building America's Infrastructure is something that interests you, then apply now! Relocation Assistance is available. Coordinate between Veritas Steel Production and DOT Inspectors to ensure DOT witnessing of production operations and QC hold points are being completed. • Perform visual inspection of material as required. • Perform layout checks as needed.• Perform rotational capacity tests on bolts prior to use in shop.• Work with outside inspectors to resolve quality issues on the floor.• Monitor welder qualification tests.• Monitor and record welding parameters to insure compliance to approved WPS.• Be able to read and understand the Welding code and Specifications.• Perform Dimensional checks on lay downs and shop assemblies. Use Total Station as needed.• Develop improvements in the quality control process to facilitate flow of work through shop. Primary Responsibilities: How will you accomplish the Objectives? • Conduct audits of Quality Management System• Perform in a manner that will assure quality work flowing through the shop.• Work with welders and leadmen to maintain quality.• Be available, by use of a radio, etc. to perform needed checks.• Maintain a log of work done, and complete required reports.• Interpret the Specifications and applicable Codes.• Ability to be flexible to work either early or late within assigned shift as needed.• Coordinate inspection of QC hold points between production and DOT Inspectors.• Use and encourage safe working habits. Competencies/Skills To perform the responsibilities, you must have the ability and skills to: • Effectively communicate with the crews, supervisors, and Quality Manager the results of your work, evaluate problems, proposed acceptable corrections, solutions, and schedules.• Ability to understand and interpret blueprints, use measurement tools and techniques to verify geometric tolerances of fabricated parts and assemblies. • Strong attention to detail and ability to make informed decisions based on project codes and specifications• Coordinate your work with shipping department to assure loads have been inspected and ready to ship.• Work with supervisors to plan your work and time in each shop to facilitate the flow of quality work through the shop.• General working knowledge of Total Station to assist crews as needed and finalize assemblies during off shifts as needed.• Positive attitude to promote team morale and ability to coach employees for improved quality of workmanship Measures of Success: Objective facts that demonstrate great performance. • Outstanding work record, great attendance record and always-on time.• No accidents. A safe worker is an asset to both their fellow worker and the company.• Increase throughput in the area that work being performed being able to streamline the required work and constantly making positive improvements.• Accept positive feedback from fellow workers and supervisors, on performance and competencies. Requirements - Certified Welding Inspector Certification or ASNT VT Level II Preferred Qualifications - ASNT MT Level II ASNT UT Level II NACE or SSPC BCI Level I Fabrication Shop Background 2nd shift is 530pm to 530am M - Th, 4 day work week

Title: Production Technician Pay Rate: $ Shift: [DAYS] | [SHIFT] Who You Are: You're a hands-on production pro who thrives in a fast-paced, quality-driven environment. With an eye for detail and a steady focus on consistency, you take pride in packaging and labeling premium cannabis products-from dried flower and pre-rolls to vape cartridges, pens, and infused items. You enjoy working with clear procedures, following safety and compliance standards, and collaborating with teammates to keep operations running smoothly. Your reliability and commitment to accuracy ensure every finished product meets Curaleaf's high standards before it reaches our customers. What You'll Do: As a Production Technician at Curaleaf, you'll play a key role in delivering high-quality cannabis products by supporting every stage of the packaging process. In this fast-paced, hands-on role, you will: * Stage products and packaging materials across production lines while performing quality assurance checks to meet daily schedules and Curaleaf's high standards * Boost operational efficiency and minimize waste by taking ownership, collaborating with the team, and communicating effectively * Conduct in-process and final quality checks, including testing, visual inspections, and precise weighing, while maintaining 100% compliance in data recording, product tracking, and secure packaging * Work quickly and efficiently to boost productivity while keeping the extraction room organized, clean, and inspection-ready * Operate efficiently while following OSHA standards, Curaleaf SOPs, and all required procedures, ensuring every product is accurately labeled and fully compliant with state regulations What You'll Bring: * You are eager to learn and can be trained on various production equipment and SOPs while consistently meeting performance expectations set by leadership * You bring strong attention to detail and effective communication skills, thriving in a fast-paced, team-based production environment * You can comfortably perform repetitive tasks with focus and consistency over extended periods * You have a strong work ethic, are punctual and reliable, and help maintain a positive, professional team environment * You have a high school diploma, GED, or equivalent Even Better If: * You have at least one year of manufacturing or packaging experience focused on product safety, consumer satisfaction, and delivering high-quality results Physical Requirements * Ability to stand, sit, and walk for extended periods of time (8-10 hours per shift) * Ability to lift and carry up to 50 pounds regularly and occasional lifting of heavier items with assistance * Frequent and repetitive use of hands and wrists for extended periods of time * Repetitive bending, squatting, and reaching * Ability to climb ladders or step stools to access plants or equipment * Ability to use required PPE when required, such as masks, hair nets, beard covers, respirators, boot covers, scrubs, non-slip shoes, and Tyvek suits as necessary Environmental Conditions * Exposure to environments with high humidity, varying temperatures, and strong odors (such as cannabis) * Exposure to soil, water, fertilizer, dust, pollen and plant pathogens * Exposure to cleaning solvents, such as high volumes of isopropyl alcohol * Exposure to loud noises, including but not limited to air compressors, packaging equipment, and alarms * Exposure to CO2 manufacturing procedures at OSHA approved CO2 levels

Job DescriptionDescription: JE Technology Solutions, Inc., a designer and manufacturer of Aircraft Ground Equipment, is seeking a talented, experienced, and highly-analytical Quality Control Inspector to join our production department. As a Quality Control Inspector, you will uphold the safety regulations of our company and supervise the production process to guarantee that all our products meet quality expectations. The chosen candidate will perform regular product evaluations, record inspection results, and recommend improvements to the production process. To excel in this role, applicants should demonstrate great attention to detail with excellent technical and math abilities. Responsibilities: · Perform regular quality assessments on all incoming materials from vendors and outgoing products for shipping. · Reject all products and materials that fail to meet quality expectations. · Read drawings and specifications to understand the requirements of products and services. · Utilize tools such as eDrawings and Isometric Views on drawings to verify orientation of items during inspection. · Measure product dimensions, examine functionality and compare the final product to the specifications. · Recommend improvements to the production process to ensure quality control. · Document inspection outcomes by completing detailed reports. · Measure and record Quality Control related KPIs, such as First Pass Yield. · Communicate and confirm defects have been corrected with the production team. · Promote Quality-At-The-Source best practices to improve product excellence. · Ability to problem solve using tools like “ask five whys”. · Observe the production process. · Prioritize prompt response to production floor to ensure continuous flow of production. · Collaborate with the quality and manufacturing teams to resolve quality-related issues in a timely manner. · Participate in functional testing of products such as load testing, electrical testing, pressure testing, etc. · Ability to follow company Standard Operating Procedures and uphold Workmanship Standards. · Add occasional need to travel for field inspections including military bases. Requirements: High school diploma or equivalent qualification. Certification in quality control is preferred. A minimum of 2 years' experience in a similar role. Excellent knowledge of MS Office. Good math and technical skills. Strong understanding of quality control standards and testing techniques. Willing to work shift from Monday - Thursday 3:30pm - 12:00am. Preferred Skills: · Quality Inspection · Welding Inspection · Proficiency with inspection equipment, such as: o Tape Measure o Calipers o Dial Indicator o Multimeter o Pressure Gauges o Thread Gauges o Gauge Blocks · Familiarity with PCMM inspection equipment including probe and scanner attachments is a plus · Quality Control · Dimensional Inspection · ISO 9001:2015 Awareness · Experience with GD&T is a plus · Manufacturing Processes and Procedures · Familiarity with AS9100 is a plus · Experience with NDT and Magnetic Particle Inspection is a plus JE Technology Solutions, Inc. is a Drug Free Workplace. All offers of employment by JE Technology Solutions, Inc. are contingent on completion of a drug test within 2 business days of your offer acceptance and a background check with results in compliance with company policy. JE Technology Solutions, Inc. uses E-Verify to confirm employment eligibility for roles based in the United States. JE Technology Solutions is an Equal Opportunity Employer. All applicants will receive consideration for employment without regard to race, color, religion, sexual orientation, gender identity, national origin, veteran or disability status.

Focuses on analytical laboratory activities for specific testing involving HPLC; in addition, participation in a variety of food quality control analytical/microbiological support activities is required. Work is performed through the application of a body of knowledge related to standard laboratory methods, practices, procedures, policies, regulations, and laboratory materials and equipment. Duties and Responsibilities: * Operates and maintains HPLC units * Prepping and running samples following established protocol, responsible for maintaining instruments, calibrating, and following maintenance regimen. * Prepare eluent and required reagents. Responsible for accuracy in the preparation of reagents, eluents, and standards. * Performs chemical and physical analyses on a variety of samples, including food products and intermediate samples. * Tests include but are not limited to organoleptic evaluations, pH, acidity titrations, sodium, nitrate/nitrite analyses, Brix, moisture, specific gravity, moisture, pulp content, etc. * Performs required calculations and posts/maintains required spreadsheets. * Performs microbiological analyses on a variety of products, following required aseptic techniques in media prep, sample collection, plating and bacteria identification. * Logs samples and related pertinent information. Follows appropriate documentation and record-keeping procedures. * Performs related work as assigned. Skills & Qualifications * Proficient in chemistry and laboratory procedures. * Attention to detail and strong documentation skills. * Troubleshooting and root cause analysis. * Proficiency in quality assurance, microbiology, quality control, and GMP. * Bachelor's degree or Diploma in Food Science, Quality, or related discipline is preferred Job Type & Location This is a Contract to Hire position based out of Eustis, FL. Pay and Benefits The pay range for this position is $21.50 - $21.50/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Eustis,FL. Application Deadline This position is anticipated to close on Feb 2, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options.

Full-time Description JE Technology Solutions, Inc., a designer and manufacturer of Aircraft Ground Equipment, is seeking a talented, experienced, and highly-analytical Quality Control Inspector to join our production department. As a Quality Control Inspector, you will uphold the safety regulations of our company and supervise the production process to guarantee that all our products meet quality expectations. The chosen candidate will perform regular product evaluations, record inspection results, and recommend improvements to the production process. To excel in this role, applicants should demonstrate great attention to detail with excellent technical and math abilities. Responsibilities: · Perform regular quality assessments on all incoming materials from vendors and outgoing products for shipping. · Reject all products and materials that fail to meet quality expectations. · Read drawings and specifications to understand the requirements of products and services. · Utilize tools such as eDrawings and Isometric Views on drawings to verify orientation of items during inspection. · Measure product dimensions, examine functionality and compare the final product to the specifications. · Recommend improvements to the production process to ensure quality control. · Document inspection outcomes by completing detailed reports. · Measure and record Quality Control related KPIs, such as First Pass Yield. · Communicate and confirm defects have been corrected with the production team. · Promote Quality-At-The-Source best practices to improve product excellence. · Ability to problem solve using tools like “ask five whys”. · Observe the production process. · Prioritize prompt response to production floor to ensure continuous flow of production. · Collaborate with the quality and manufacturing teams to resolve quality-related issues in a timely manner. · Participate in functional testing of products such as load testing, electrical testing, pressure testing, etc. · Ability to follow company Standard Operating Procedures and uphold Workmanship Standards. · Add occasional need to travel for field inspections including military bases. Requirements High school diploma or equivalent qualification. Certification in quality control is preferred. A minimum of 2 years' experience in a similar role. Excellent knowledge of MS Office. Good math and technical skills. Strong understanding of quality control standards and testing techniques. Willing to work shift from Monday - Thursday 3:30pm - 12:00am. Preferred Skills: · Quality Inspection · Welding Inspection · Proficiency with inspection equipment, such as: o Tape Measure o Calipers o Dial Indicator o Multimeter o Pressure Gauges o Thread Gauges o Gauge Blocks · Familiarity with PCMM inspection equipment including probe and scanner attachments is a plus · Quality Control · Dimensional Inspection · ISO 9001:2015 Awareness · Experience with GD&T is a plus · Manufacturing Processes and Procedures · Familiarity with AS9100 is a plus · Experience with NDT and Magnetic Particle Inspection is a plus JE Technology Solutions, Inc. is a Drug Free Workplace. All offers of employment by JE Technology Solutions, Inc. are contingent on completion of a drug test within 2 business days of your offer acceptance and a background check with results in compliance with company policy. JE Technology Solutions, Inc. uses E-Verify to confirm employment eligibility for roles based in the United States. JE Technology Solutions is an Equal Opportunity Employer. All applicants will receive consideration for employment without regard to race, color, religion, sexual orientation, gender identity, national origin, veteran or disability status.

Job Summary: Focuses on analytical laboratory activities for specific testing involving HPLC; in addition, participation in a variety of food quality control analytical/microbiological support activities is required. Work is performed through the application of a body of knowledge related to standard laboratory methods, practices, procedures, policies, regulations, and laboratory materials and equipment. Duties and Responsibilities: Operates and maintains HPLC units Prepping and running samples following established protocol, responsible for maintaining instruments, calibrating, and following maintenance regimen. Prepare eluent and required reagents. Responsible for accuracy in the preparation of reagents, eluents, and standards. Performs chemical and physical analyses on a variety of samples, including food products and intermediate samples. Tests include but are not limited to organoleptic evaluations, pH, acidity titrations, sodium, nitrate/nitrite analyses, Brix, moisture, specific gravity, moisture, pulp content, etc. Performs required calculations and posts/maintains required spreadsheets. Performs microbiological analyses on a variety of products, following required aseptic techniques in media prep, sample collection, plating and bacteria identification. Logs samples and related pertinent information. Follows appropriate documentation and record-keeping procedures. Performs related work as assigned. Skills laboratory, Quality control, Gmp, Chemistry, Hplc, Quality assurance, Wet chemistry, Analysis Top Skills Details laboratory,Quality control,Gmp Additional Skills & Qualifications Manual skills: Ability to lift to 40 lbs. Manual labor required for this position. Occasional exposure to odors, dusts/powders and noise. Wearing of hairnet, facial hair covering (if applicable), hearing protection, mask, lab coat and goggles are required. Knowledge of laboratory tests and analyses. Strong attention to detail. Multitasking capability Self-motivated Must be able to stand for extended periods of time Comply with company regulations on personal protective equipment Ability to handle samples and laboratory equipment. Ability to handle heavy weight (up to 40 lbs.) Ability to make mathematical computations. Ability to keep records. Ability to communicate effectively. Ability to work in a team environment. Ability to organize and carry out assigned task or program. Ability to adapt new technology and methods to enhance program effectiveness. Experience Level Intermediate Level Job Type & Location This is a Contract to Hire position based out of Eustis, FL. Pay and Benefits The pay range for this position is $21.50 - $21.50/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Eustis,FL. Application Deadline This position is anticipated to close on Feb 2, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options.