Senior electrical engineer jobs in Delta, MI - 118 jobs

Directly leads 10 to 50 Electricians. Carries out leader responsibilities in accordance with the organization's policies and applicable laws. Responsibilities include planning, assigning, directing work and resolving job related technical problems. Highly skilled / Quality of Work exceeds and/or meets expectations. Carries out leader responsibilities in accordance with the organization's policies and applicable laws. Responsibilities include planning, assigning, directing work and resolving job related technical problems. Plans wiring and installation of equipment and fixtures. Inspects wiring and fixtures for conformance to company and/or customer specifications. Studies build schedules and estimates worker hour requirements for completion of job assignment. Interprets company policies to workers and enforces safety regulations. Interprets specifications, blueprints, and job orders to workers, and assigns duties. Interprets customer specifications, OSHA and Ontario Hydro requirements. Recommends measures to improve build methods, equipment performance, and quality of product. Suggests changes in working conditions and use of equipment to increase efficiency of shop, department, or work crew. Analyzes and resolves work problems, or assists workers in solving work problems. Initiates or suggests plans to motivate workers to achieve work goals. Maintains time and build records. Estimates, requisitions, and inspects materials. Confers with other leaders to coordinate activities of individual departments. Follows up on Hit lists, Material, & Percentage complete. Supports Debug. Interfaces between Design, Purchasing, Follow-up & Manufacturing. Attends Meetings. Marks up Layouts and collects Cable Length. Sets up guidelines for preliminary wiring done on our floor (power feed, jumpers, etc. ) Makes sure that the necessary power is available (power drops, bus capacity, transformers for different voltages, etc. ) Makes sure that changes are marked up in the drawing set and conveyed back to the controls design. Understands and follows safety & environmental regulations and identifies safety/environmental concerns. Adheres to the Quality System and participates in continuous improvement. Regular and predictable attendance is an essential function of this job. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to use hands to finger, handle, or feel and talk or hear. The employee frequently is required to stand, walk, and reach with hands and arms. The employee is occasionally required to sit; climb or balance; and stoop, kneel, crouch, or crawl. The employee must frequently lift and/or move up to 10 pounds and occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently exposed to moving mechanical parts. The employee is occasionally exposed to high, precarious places; fumes or airborne particles; and risk of electrical shock. The noise level in the work environment is usually moderate.

A leading specialty electric motor manufacturer is seeking an experienced Electrical Engineer to design and develop custom electric motors for industrial and specialty applications. In this role, you will focus on electromagnetic design, motor performance optimization, and collaboration with mechanical and manufacturing teams to bring high-performance motors from concept to production. Position Offers $100,000-$150,000 salary. If your target pay is higher, we still encourage you to apply-we could request adjustments based on experience and market conditions. Competitive benefits (PTO, Health, dental, vision, life, FSA, 401(k)). Positive work culture, prioritizing employee well-being and long-term relationships. Flexible work location. Responsibilities Design and develop electric motor electrical systems including stator and rotor designs, winding specifications, and magnetic circuits. Perform electromagnetic analysis using tools such as FEA software to optimize motor performance for torque, efficiency, thermal management, and reliability. Create detailed electrical specifications, schematics, wiring diagrams, and Bills of Materials (BOMs). Support the development of prototypes and validation testing to ensure performance and durability meet design requirements. Collaborate closely with mechanical engineering, production, and quality teams to ensure seamless integration of electrical designs into finished products. Research new technologies, materials, and design approaches to enhance motor capabilities and manufacturing efficiency. Troubleshoot and resolve technical issues related to motor performance during development, production, and field use. Document design processes, test results, and design changes according to company and industry standards. Qualifications Bachelor's degree in Electrical Engineering or a related field (Master's degree a plus). 3+ years of experience in electric motor design (AC, DC, synchronous, induction, or specialty motors). Proficiency with electromagnetic design and analysis tools (such as Maxwell, Motor-CAD, or similar). Strong knowledge of electrical machine theory, electromagnetics, and thermal effects in motor design. Experience working with motor controls, drives, and power electronics is a plus. Hands-on experience with prototype testing, validation, and troubleshooting. Excellent analytical, organizational, and problem-solving skills. Strong communication skills and ability to collaborate across departments. Application Process If your experience matches the description above, submit your resume, and one of our recruiters will be in touch to tell you more about the position and learn more about your experience and aspirations. If your experience does not match this job description, we still encourage you to reach out to one of our recruiters, so we can learn about your professional aspirations for future job openings. About Bemana Bemana provides recruiting services to the nation's equipment and industrial sectors. Our clients and candidates value us for our specialized recruiting expertise, vast knowledge of the equipment and industrial job market, and ability to solve their most challenging employment needs. We have successfully recruited thousands of top-level professionals filling a wide range of management, sales, engineering, and technical positions across the nation. Welcome to Bemana and we look forward to getting to know more about you. Referral Program Bemana offers a $500 reward for referrals that lead to a hire. So, if this job or location is not for you, but you know someone that might be interested, send them this link and we'll send you a check if they get hired. Terms & conditions apply.

Knauf Insulation North America is the world's fastest-growing insulation manufacturer. We are wholly committed to the conservation of the environment while also sustainably developing and manufacturing a comprehensive line of acoustical fiberglass insulation for residential, commercial, industrial, marine, OEM and metal building applications, using post-consumer recycled materials. We welcome passionate and creative individuals who thrive in an entrepreneurial, collaborative and ever-changing environment. We know how important your health, wellbeing, and financial strength is to you. To support you, we provide affordable benefits for you and your family members. "Supporting all aspects of the individual - self, health, wealth and community” Our benefits include: Medical, Dental, Vision - starting on day one! Virtual Medical Services 401(k) Retirement Plan (earn 100% matching on your first 6% and fully vested day one) Paid parental leave Company paid life insurance Vacation time to enjoy getting away Tuition Reimbursement Employee Assistance Program (EAP) Plus, more! Growth opportunities available! Apply online or contact us to hear why our employees appreciate being part of the Knauf family! Summary of Position: Join our team as an Electrical Project Engineer and play a pivotal role in driving innovation and excellence across our North American plants! In this dynamic position, you'll lead the design and project management of cutting-edge electrical and control systems, focusing on process improvements and optimizing machine performance. You'll have the opportunity to explore and implement advanced technologies that enhance safety, quality, and profitability. Your expertise will shine as you design and program PLCs, HMIs, Drives, and Servo systems, while managing contractor relationships and overseeing large-scale capital projects. Collaboration is key, as you'll work closely with teams across the company, contributing to the standardization of controls, networks, and power equipment. With approximately 30% travel (and more during exciting plant rebuilds), you'll experience hands-on involvement in transformative projects that make a real impact. If you're passionate about innovation, problem-solving, and making a difference, this role offers the perfect blend of technical challenges and rewarding opportunities. Join us and help shape the future of our facilities! Must be willing to relocate to one of our U.S. locations to be considered for the role (Relocation is provided): - Albion, MI - Lanett, AL - Inwood, WV - McGregor, TX - Shasta Lake, CA - Shelbyville, IN Responsibilities Lead and Oversee Large-Scale Capital Projects: Take ownership of major capital initiatives, ensuring successful execution from concept to completion. Design and Program Advanced Systems: Perform programming for Programmable Logic Controllers (PLC), Human-Machine Interfaces (HMI), Drives, and Servo systems to optimize performance and efficiency. Drive New Plant Projects and Equipment Upgrades: Manage the design, specification, and execution of new plant projects, as well as the upgrade and redesign of existing equipment, ensuring seamless integration and improved functionality. Develop and Execute Comprehensive Project Plans: Create detailed scopes of work, request and evaluate quotes, issue purchase orders, and coordinate internal and external project teams while maintaining strict adherence to budgets and timelines. Manage Contractor Relationships: Oversee external contractors performing new installations and electrical upgrades, ensuring quality and compliance with project requirements. Pursue Cutting-Edge Technologies: Identify and implement innovative solutions to enhance safety, product quality, plant profitability, and operational efficiency by reducing scrap, lowering maintenance costs, and more. Coordinate and Implement OEM Equipment: Collaborate with Original Equipment Manufacturers (OEMs) to integrate new equipment into plant operations effectively. Enhance Electrical Safety Practices: Partner with Corporate HSE to develop and implement best-in-class electrical safety practices across all Knauf Insulation North America facilities. Support Plant Rebuilds: Provide critical expertise and leadership during plant rebuilds, ensuring projects are completed efficiently and effectively. Train and Develop Team Members: Offer training and development support to plant Craftsmen, Operators, and Engineers, fostering a culture of continuous improvement and skill enhancement. Drives the highest levels of employee retention and engagement to ensure a sustainable workforce. Fosters a culture of innovation, collaboration, and accountability within the organization. Instill an environment of inclusion, where all employees feel that they can contribute and impact the company in a positive manner. Qualifications Education: Bachelor's Degree in Electrical Engineering or Electrical Engineering Technology Knowledge, Skills and Abilities: Strong leadership skills with a natural ability to take initiative and guide teams toward success. A willingness to learn and grow, with a proactive attitude toward acquiring new skills and knowledge. Highly adaptable and able to thrive in a fast-paced, ever-changing environment. Excellent communication and interpersonal skills, with the ability to persuade and influence others effectively. A collaborative mindset, capable of building strong relationships with team members, contractors, and stakeholders. Problem-solving skills with a creative and innovative approach to overcoming challenges. A passion for technology and a drive to implement solutions that improve safety, quality, and profitability. It is the policy of Knauf Insulation to provide equal employment opportunities to all qualified persons without regard to race, color, religion, sex (including pregnancy, childbirth, or related medical conditions), gender, sexual orientation, gender identity or expression, national origin, age, genetic information, disability, protected veteran status or any other protected characteristic prohibited by applicable law. Not ready to apply? Connect with us for general consideration.

**Role:** As a Principal Staff Artificial Intelligence Engineer within the Simulation and Testing organization, you will play a critical role in leading the strategy and execution of simulation-based validation efforts for autonomous vehicle development. Your expertise will guide a team of engineers in defining best practices and driving innovation in testing and verifying the safety and performance of autonomous systems in complex simulated environments. You will be responsible for shaping the future of our simulation capabilities and ensuring robust validation methods are implemented effectively. **About the Organization:** The Simulation and Testing team is dedicated to advancing the development of autonomous vehicles through cutting-edge simulation technologies. We focus on creating realistic and challenging test scenarios that enable comprehensive evaluation of autonomous systems. Our collaborative environment fosters innovation and excellence, allowing us to push the boundaries of what is possible in autonomous vehicle testing. **What You'll Do:** + Lead the design, development, and implementation of simulation-based validation strategies for autonomous systems, ensuring safety and performance metrics are met. + Guide and mentor a team of engineers, fostering a culture of innovation and excellence in simulation methodologies. + Define and implement robust validation methods and sophisticated evaluation strategies within simulation frameworks, including the creation of challenging test scenarios and analysis of results at scale. + Collaborate cross-functionally with teams involved in autonomous system development to ensure seamless integration of simulation testing into the overall development process. + Influence technical roadmaps and strategic priorities, aligning simulation efforts with company objectives and product milestones. **Your Skills & Abilities (Required Qualifications):** + Master's in Robotics, Computer Science, Engineering, or a related technical field. + 10 years of extensive experience in simulation and testing, preferably within the autonomous vehicle domain. + Proven track record in developing or testing large-scale Machine Learning (ML) systems, with a strong understanding of simulation platforms and methodologies. + Direct experience leveraging LLMs/VLMs/etc. for production workflows. + Experience with the entire machine learning lifecycle from data generation and curation through model training through model deployment. + Hands-on expertise in implementing robust validation methods and evaluation strategies, including defining relevant metrics and correlating simulation performance with real-world behavior. + Strong software engineering skills, particularly in programming languages relevant to simulation and testing. + Excellent communication, collaboration, and mentoring abilities, with a passion for driving innovation in autonomous technology. **What Can Give You a Competitive Edge (Preferred Qualifications):** + Ph.D. in Robotics, Computer Science, Engineering, or a related technical field. + 15 years of extensive experience in simulation and testing, preferably within the autonomous vehicle domain. **Compensation** **:** The compensation information is a good faith estimate only. It is based on what a successful applicant might be paid in accordance with applicable state laws. The compensation may not be representative for positions located outside of the California Bay Area. + The salary range for this role is $193,000 - $296,600. The actual base salary a successful candidate will be offered within this range will vary based on factors relevant to the position. + Bonus Potential: An incentive pay program offers payouts based on company performance, job level, and individual performance. **Benefits:** GM offers a variety of health and wellbeing benefit programs. Benefit options include medical, dental, vision, Health Savings Account, Flexible Spending Accounts, retirement savings plan, sickness and accident benefits, life insurance, paid vacation & holidays, tuition assistance programs, employee assistance program, GM vehicle discounts and more. **Company Vehicle:** Upon successful completion of a motor vehicle report review, you will be eligible to participate in a company vehicle evaluation program, through which you will be assigned a General Motors vehicle to drive and evaluate. Note: program participants are required to purchase/lease a qualifying GM vehicle every four years unless one of a limited number of exceptions applies." **Remote:** This role is based remotely but if you live within a 50-mile radius of [Atlanta, Austin, Detroit, Warren, Milford or Mountain View], you are expected to report to that location three times a week, at minimum. **This job may be eligible for relocation benefits.** \#LI-DO1 **About GM** Our vision is a world with Zero Crashes, Zero Emissions and Zero Congestion and we embrace the responsibility to lead the change that will make our world better, safer and more equitable for all. **Why Join Us** We believe we all must make a choice every day - individually and collectively - to drive meaningful change through our words, our deeds and our culture. Every day, we want every employee to feel they belong to one General Motors team. **Benefits Overview** From day one, we're looking out for your well-being-at work and at home-so you can focus on realizing your ambitions. Learn how GM supports a rewarding career that rewards you personally by visiting Total Rewards Resources (************************************************************* . **Non-Discrimination and Equal Employment Opportunities (U.S.)** General Motors is committed to being a workplace that is not only free of unlawful discrimination, but one that genuinely fosters inclusion and belonging. We strongly believe that providing an inclusive workplace creates an environment in which our employees can thrive and develop better products for our customers. All employment decisions are made on a non-discriminatory basis without regard to sex, race, color, national origin, citizenship status, religion, age, disability, pregnancy or maternity status, sexual orientation, gender identity, status as a veteran or protected veteran, or any other similarly protected status in accordance with federal, state and local laws. We encourage interested candidates to review the key responsibilities and qualifications for each role and apply for any positions that match their skills and capabilities. Applicants in the recruitment process may be required, where applicable, to successfully complete a role-related assessment(s) and/or a pre-employment screening prior to beginning employment. To learn more, visit How we Hire (********************************************* . **Accommodations** General Motors offers opportunities to all job seekers including individuals with disabilities. If you need a reasonable accommodation to assist with your job search or application for employment, email (Careers.Accommodations@GM.com) us or call us at ************. In your email, please include a description of the specific accommodation you are requesting as well as the job title and requisition number of the position for which you are applying. We are leading the change to make our world better, safer and more equitable for all through our actions and how we behave. Learn more about: **Our Company (************************************************** **Our Culture** **How we hire (************************************************ Our diverse team of employees bring their collective passion for engineering, technology and design to deliver on our vision of a world with Zero Crashes, Zero Emissions and Zero Congestion. We are looking for adventure-seekers and imaginative thought leaders to help us transform mobility. Explore our global locations (******************************************** We are determined to lead change for the world through technology, ingenuity and harnessing the creativity of our diverse team. Join us to help lead the change that will make our world better, safer and more equitable for all by becoming a member of GM's Talent Community (beamery.com) (*********************************************** . As a part of our Talent Community, you will receive updates about GM, open roles, career insights and more. Please note that filling out the form below will not add you to our Talent Community automatically; you will need to use the link above. If you are seeking to apply to a specific role, we encourage you to click "Apply Now" on the job posting of interest. The policy of General Motors is to extend opportunities to qualified applicants and employees on an equal basis regardless of an individual's age, race, color, sex, religion, national origin, disability, sexual orientation, gender identity/expression or veteran status. Additionally, General Motors is committed to being an Equal Employment Opportunity Employer and offers opportunities to all job seekers including individuals with disabilities. If you need a reasonable accommodation to assist with your job search or application for employment, email us at Careers.Accommodations@GM.com .In your email, please include a description of the specific accommodation you are requesting as well as the job title and requisition number of the position for which you are applying.

Senior Power Electronics Engineer Who we are… We are a team of scientists, engineers, technicians, and innovators dedicated to changing the world by developing medical isotopes to treat and eradicate cancer. We believe in building an environment where collaboration, curiosity, and camaraderie thrive. We also enjoy darts, cornhole, ping-pong, chili cook-offs, and other fun events that make our company a community where we make a life, not just a living. Who you are… You love details and precision. You find enjoyment in solving puzzles, designing and mapping systems, and building efficient circuitry. Words that describe you are focused, curious, and collaborative. What you can expect to work on… The Power Electronics Engineer role at Niowave has responsibility over design, implantation and integration of accelerator power systems. These systems are varied and include critical accelerator subsystems like the cathode heater, the electron gun tuners, etc. This position will also involve support to cryogenics, RF, and high voltage subsystems and some involvement in circuits that enable or control specialized accelerator systems like RF and beam loss detectors. Design, implement and maintain accelerator power systems including controlled heaters and tuners. Consult with controls engineers on the proper power layout for normal-conducting beamline magnets and beamline diagnostics. Interface with nuclear engineers concerning the design and operation of the x-ray conversion target. Be part of the team designing the concept, architecture, and components of future systems. Conduct optimization work on existing systems, perform measurements and validation tests Confirm system capabilities by designing testing methods What you need to succeed… Bachelor's degree in the fields of electrical engineering, specifically power electronics and circuits 5+ years of power electronics experience. Experience designing, building and testing systems. Broad understanding of power electronics/circuitry technology. Regularly engages in mentoring multiple team members in all aspects of RF Engineering. Expert level analytical and problem-solving skills; Organizational and project management skills for self and teams. Embrace and model the Niowave Values of Teamwork, Courage, Integrity, and Upright Zeal. Understand how to integrate into a new team/organization - appreciate the history of current state, know how and when to make suggestions, as well as using just the right pace to reach the improved future state. Understand their own communication and learning styles, can assess others' styles, and is able to find the right path to connect the two. Great to have… Master's or Doctorate degree in the fields of electrical engineering, power electronics, circuits, etc. 8+ years of power electronics related experience. 5+ or more years of experience with power electronics and accelerators in a research or production environment. Experience leading teams to complete large projects. 2+ years' experience of direct supervisory experience of five or more people. Work Environment… Full-time position. The company's standard operating hours are Monday thru Friday 6a - 6p with production related activities requiring 24/7/365 shifts. This position will have regular working hours during M - F with an expectation of adjusting to meet technical objectives and to meet with staff working outside of the standards operating hours as needed. Niowave has multiple locations within the Lansing area. Travel between locations is expected in the role. Please provide a cover letter specifically describing the nature of your technical expertise.

Join a dynamic team specializing in the design, manufacturing, and development of advanced Unmanned Aerial Systems (UAS) for military and defense applications. As an Electrical Engineer, you will take full ownership of a new electrical system for UAV platforms, managing the entire process from developing schematics to testing and completing the electrical design lifecycle. This role requires the design of complex systems, proficiency in wire harnessing, and the ability to ensure compliance with industry standards. Candidates must be U.S. citizens due to ITAR-controlled facility requirements. Responsibilities + Meet with the engineering team to review and discuss plans. + Review and make necessary adjustments to schematics. + Implement electrical system designs. + Perform hands-on wiring and integration of aircraft electrical systems. Essential Skills + 3+ years of experience in Electrical Engineering, focusing on designing electrical systems and wire harnessing. + Proficiency in Microsoft Office and CAD design tools such as Autodesk AutoCAD, AutoCAD Electrical, Inventor, Vault, EPLAN, or similar. + Ability to interpret and execute specifications, wiring diagrams, schematics, and engineering drawings. + Engineering degree in Electrical Engineering. + Experience in working in aerospace industry highly preferred. + US Citizenship. Additional Skills & Qualifications + Experience with Solidworks. + UAV flying experience is a plus. + Secret Clearance will be required once direct. Work Environment The role is based on-site, working closely with 2-3 Electrical Technicians. The standard hours are 8-5 with flexibility (e.g., 07:30-4:30). Overtime may be required if approaching a deadline, but this is not typical. Minimal travel may be necessary towards the end of the year, less than 5%. Job Type & Location This is a Contract to Hire position based out of Howell, MI. Pay and Benefits The pay range for this position is $40.00 - $50.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: - Medical, dental & vision - Critical Illness, Accident, and Hospital - 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available - Life Insurance (Voluntary Life & AD&D for the employee and dependents) - Short and long-term disability - Health Spending Account (HSA) - Transportation benefits - Employee Assistance Program - Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Howell,MI. Application Deadline This position is anticipated to close on Jan 20, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com (%20actalentaccommodation@actalentservices.com) for other accommodation options.

Welcome to Verdantas, where innovation meets sustainability, and your career finds purpose! At Verdantas, we're redefining environmental consulting and sustainable engineering through our use of cutting-edge modeling and digital technology and our genuine commitment to people. Our work spans high-growth sectors like water resources, resilient land use, energy transformation, and civil infrastructure. Our commitment to excellence, across more than 90 offices, is championed by a team of over 2,000 experts, scientists, engineers, geologists, and technical specialists, embedded in a people-focused culture, prioritizing the well-being of our employees, clients, and the communities we serve. We partner with clients to deliver smart, data-driven solutions to complex environmental and infrastructure challenges. We don't just solve problems; we help shape a more sustainable future. Join a people-first culture that values your well-being, empowers your growth, and amplifies your impact. At Verdantas, your career goes beyond the expected, and your work helps build a better world. **Ready to shape the future of resilient communities?** We are seeking an experienced **Distribution Engineer** to help us with our growing workload. The candidate should be self-driven and detail-oriented and thrive on taking ownership, quickly adapting to challenges, and solving problems. The position is **hybrid** and located at our Grand Rapids or Petoskey, MI office. Additionally, the opportunity is remote, but it would require 50% travel to client sites. At Verdantas, our Power team is transforming the electric utility industry through innovative, impactful projects. We lead the way in decommissioning and repurposing coal-fired plants, ensuring environmental compliance and sustainable redevelopment. Our expertise spans power delivery system upgrades-from transmission lines to substations-while integrating advanced engineering and environmental strategies to meet regulatory demands and boost reliability. We also drive digital transformation in utility asset management with cutting-edge 3D modeling and laser scanning. **Join us to power the shift toward cleaner, smarter energy solutions. Apply today and make a lasting impact.** **What You'll Do:** + Lead the design and analysis of electric distribution systems (4kV-35kV), including new line extensions, system upgrades, and reliability improvements. + Develop construction work packages using GIS, AutoCAD, and client-specific design tools. + Perform load calculations, voltage drop analysis, and protective device coordination. + Prepare engineering deliverables such as plans and profile drawings, bill of materials, and construction specifications. + Coordinate with utility clients, permitting agencies, and internal teams to ensure project success. + Mentor junior engineers and designers, providing technical guidance and quality assurance. + Support project management activities, including scope, schedule, and budget tracking. + Ensure compliance with utility standards, National Electrical Safety Code (NESC), and environmental regulations. + Distribution line design & project management + Joint-use attachment reviews + Distribution system mapping & modeling + Distribution system load flow, coordination, & arc-flash studies + Municipal electric utility engineering support **What You'll Bring:** + Bachelor's degree in electrical engineering + Professional Engineer (PE) license + 10+ years of experience in electric distribution engineering, preferably with utility or consulting firms + Proficiency in AutoCAD, GIS, CYME, or similar distribution modeling tools + Strong knowledge of NESC, NEC, and utility design standards + Experience with Milsoft WindMil E&A software is a plus + Experience with O-Calc is a plus + Ability to specify portions of the engineering systems based on past experience + Excellent communication and leadership skills + The ability to work nights and weekends as required to attend meetings or to meet demanding project schedules **Salary Range:** At Verdantas, we offer comprehensive benefits packages for our employees. Actual salary is based on the circumstances of each position and candidate, such as geographic location, skills, and certifications. We recognize and reward exceptional performance and strive to ensure fair compensation across all roles and departments within the company. The minimum salary for this position is $130,000 (negotiable based on the criteria presented above). **Benefits:** + Flexible Work Environment + Paid Parental Leave + Medical + Dental + Vision + Life and AD&D Insurance + Short-Term and Long-Term Disability + 401(k) with Company Match + Paid Time Off + Holidays _Verdantas strives to develop new ways to increase diversity awareness within our organization. We recruit and reward our employees based on capability and performance - regardless of race, gender, sexual orientation, gender identity or expression, lifestyle, age, educational background, national origin, religion, or physical ability. For us, it is imperative to build balanced teams from all walks of life and we believe that a diverse workforce is a stronger workforce._ **Verdantas is an EOE** **race/color/religion/sex/sexual** **orientation/gender identity/national** **origin/disability/vet** Ready to take the next exciting step in your career journey? Dive into our current job openings and discover the perfect opportunity waiting just for you. Explore our diverse range of roles across various departments and embark on a path towards growth, innovation, and success. Your dream job could be just a click away... For assistance filling out applications, complete this form (************************************************************************************************************************************** .

**Why UKG** At UKG, the work you do matters. The code you ship, the decisions you make, and the care you show a customer all add up to real impact. Today, tens of millions of workers start and end their days with our workforce operating platform. Helping people get paid, grow in their careers, and shape the future of their industries. That's what we do. We never stop learning. We never stop challenging the norm. We push for better, and we celebrate the wins along the way. Here, you'll get flexibility that's real, benefits you can count on, and a team that succeeds together. Because at UKG, your work matters-and so do you. **About the Role** As a Senior Principal Data Engineer within the Enterprise Data & Analytics Office, you will lead the design, evolution, and operational excellence of Nexus, UKG's unified, GCP-based data platform, enabling analytics, AI, and enterprise decision-making at scale. You will translate architectural vision into reliable, scalable, cost-efficient data systems, lead platform modernization efforts, and set the engineering bar for data ingestion, transformation, and operational analytics across UKG. **Key Responsibilities:** Enterprise Data Engineering Leadership - Drive the implementation of standardized medallion architecture (Bronze-Silver-Gold) across all domains. - Establish and enforce engineering patterns for batch, streaming, CDC, and event-driven pipelines. - Drive design patterns for Fact and Dimension modeling, data mesh, and change data capture (CDC). Platform & Pipeline Excellence - Design and evolve scalable data pipelines using GCP-native services (BigQuery, GCS, Composer, Pub/Sub, Dataflow) and Databricks (Delta Lake, DLT). - Ensure platform reliability, performance, and scalability for petabyte-scale analytics workloads. - Lead engineering decisions around partitioning, clustering, query optimization, and cost controls (FinOps). - Own observability standards (freshness, SLAs, error handling, monitoring). Engineering Standards, Quality & Governance - Define and enforce engineering standards for data quality, testing, CI/CD, and production readiness. - Implement automated data quality frameworks, lineage, and metadata integration in partnership with Data Governance and Architecture teams. - Ensure all pipelines meet SOX, security, and auditability requirements. - Partner with Architects to ensure engineering implementations align to enterprise reference architectures. Cross-Functional Delivery & Influence - Partner with Product Managers, Product Owners, Architects, and Analytics leaders to deliver high-impact data capabilities. - Act as the technical escalation point for complex production issues and platform risks. - Influence roadmap decisions by balancing technical feasibility, delivery velocity, and long-term sustainability. - Support ESE Agile delivery by enabling architecture runway and reducing technical blockers. Mentorship & Organizational Impact - Mentor Principal, Senior, and Mid-level Data Engineers, raising the overall engineering maturity of the organization. - Lead by example through design reviews, code reviews, and engineering forums. - Build reusable frameworks, libraries, and accelerators that scale engineering productivity. - Foster a culture of ownership, quality, and continuous improvement. **Basic Qualifications:** - 15+ years of experience in data engineering, data platforms, or large-scale analytics systems. - Proven leadership delivering enterprise-scale data platforms and migrations. - Deep hands-on experience large (Petabyte) scale operating data platforms . Technical Expertise - GCP (required): BigQuery, GCS, Cloud Composer, Pub/Sub, Dataflow, Dataform, Dataproc, Dataplex - Databricks: Delta Lake, Delta Live Tables, Spark, Unity Catalog - Strong proficiency in Python, SQL, Spark, and distributed systems - Expertise in data modeling, ELT patterns, CDC, and streaming architectures - Experience supporting AI/ML pipelines, feature stores, and analytics consumption - Strong understanding of Dimensional Modeling, ELT and modern data lakehouse patterns. Leadership & Collaboration - Proven ability to influence without authority across engineering, product, and architecture teams. - Strong communication skills with both technical and executive audiences. - Track record of mentoring senior engineers and leading complex initiatives. **Preferred Qualifications:** - Experience modernizing legacy warehouses and ETL platforms. - Familiarity with Data Mesh execution and domain-aligned data products. - Experience implementing FinOps practices for analytics platforms. - Exposure to AI/ML enablement, feature engineering, or agent-driven analytics. - Google Cloud certifications (Data Engineer, Architect) preferred **Company Overview:** UKG is the Workforce Operating Platform that puts workforce understanding to work. With the world's largest collection of workforce insights, and people-first AI, our ability to reveal unseen ways to build trust, amplify productivity, and empower talent, is unmatched. It's this expertise that equips our customers with the intelligence to solve any challenge in any industry - because great organizations know their workforce is their competitive edge. Learn more at ukg.com. Equal Opportunity Employer UKG is an equal opportunity employer. We evaluate qualified applicants without regard to race, color, disability, religion, sex, age, national origin, veteran status, genetic information, and other legally protected categories. View The EEO Know Your Rights poster (************************************************************************************************** UKG participates in E-Verify. View the E-Verify posters here (******************************************************************************************** . It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Disability Accommodation in the Application and Interview Process For individuals with disabilities that need additional assistance at any point in the application and interview process, please email ****************** . The pay range for this position is $184,300.00 to $230,000 however, base pay offered may vary depending on skills, experience, job-related knowledge and location. This position is also eligible for a short-term incentive and a long-term incentive as part of total compensation. Information about UKG's comprehensive benefits can be reviewed on our careers site at ********************************************* It is the policy of Ultimate Software to promote and assure equal employment opportunity for all current and prospective Peeps without regard to race, color, religion, sex, age, disability, marital status, familial status, sexual orientation, pregnancy, genetic information, gender identity, gender expression, national origin, ancestry, citizenship status, veteran status, and any other legally protected status entitled to protection under federal, state, or local anti-discrimination laws. This policy governs all matters related to recruitment, advertising, and initial selection of employment. It shall also apply to all other aspects of employment, including, but not limited to, compensation, promotion, demotion, transfer, lay-offs, terminations, leave of absence, and training opportunities.

Title: Electrical Field Engineer with QA/QC experience Contract Reports to: Project Manager Status: Non-exempt Key Project Requirements: * Proven field experience with medium voltage (MV) electrical installations, terminations, and QA/QC. * Ability to identify non-conformances and drive correction of deficiencies in the field. * Strong documentation skills for QA/QC logs, electrical checklists, and redlines. Job Summary: NAES is seeking an Electrical Field Engineer to support construction and commissioning activities at a utility-scale solar project. This role will focus on ensuring electrical installations-including medium voltage wiring and terminations-are completed to specification, and that all QA/QC documentation and corrective actions are addressed to support safe, efficient system turnover and startup. Essential Duties and Responsibilities: * Monitor and inspect medium voltage wiring, terminations, and grounding to ensure work complies with design drawings and standards. * Document installation issues, create punch lists, and follow up to ensure corrections are made. * Participate in electrical pre-functional checkouts and QA/QC processes. * Coordinate with subcontractors and vendors to ensure compliance with project schedule and QA/QC metrics. * Support safety compliance, including LOTO procedures and jobsite walkdowns. Job Requirements: * Hands-on electrical QA/QC or field engineering experience in utility-scale solar, renewable energy, or power generation. * Familiarity with medium voltage cable pulls, terminations, cable testing (Megger, HiPot), and equipment installation (switchgear, transformers, MCCs). * Understanding of NEC, NFPA 70E, and relevant QA/QC procedures. * Proficient with field documentation tools (Procore, Bluebeam, MS Office). Education / Experience: * Associate's or Bachelor's degree in Electrical Engineering, Construction Management, or equivalent work experience * 5+ years of relevant experience in field electrical QA/QC or commissioning. * OSHA 10 or 30 preferred

Electrical Engineer Join one of the nation's Best and Brightest Award-winning companies! If you're ready to be part of a winning team, we have exciting opportunities waiting for you. Make the change you've been looking for and experience the Team UIS difference. You're the best and brightest, and we want you on our team! Are you ready to take your career to the next level in the world of electrical maintenance and acceptance testing? Team UIS offers an exceptional opportunity for entrepreneurial-minded individuals. Why Join Team UIS? We are Field Service Leaders dedicated to our customers and employees. We prioritize our employees' well-being with competitive benefits that support your health, growth, and work-life balance: Competitive Compensation Company-Paid BCBS Health Benefits Dental, Vision, and Life Insurance Available Career Growth and Advancement Tuition Reimbursement Health & Wellness Reimbursement 401k with healthy company contribution With a supportive team, competitive compensation, and clear growth opportunities, this role is a chance to make your mark in an industry-leading company. Roles & Responsibilities: As an Electrical Engineer, your responsibilities will include: Model power systems and conduct the necessary analysis which includes short circuit analysis, protective device coordination, arc flash and shock hazard analysis Format the results and provide recommendations to remedy power system deficiencies Engage in on-site meetings and walkthroughs to understand and quantify the scope of work Extract crucial information from electrical drawings and project specifications Estimate the time and associated costs to quote the scope of work Organize and communicate requests for information you will need to perform the work Effectively manage clients' expectations Perform other duties as needed to contribute to the overall success of Team UIS Qualifications, Experience and Education Requirements To be successful in this role, you should have the following qualifications and skills: Bachelor of Science in electrical engineering or electrical engineering technology Michigan FE or PE - willingness to obtain in OH and IN as well. Familiar with electrical drawings (specifically one-lines, riser diagrams and panel schedules) 5+ Years of short circuit, protective device coordination or arc flash analysis studies Proficiency with SKM PowerTools©, ETAP, EasyPower and AutoCAD Efficiency with Microsoft Products Excellent communication skills, organizational ability, positive attitude. Demonstrate ability to multitask and manage multiple deadlines. Strong work ethic, embraces new challenges, will do the necessary research to find the right solution. Must be authorized to work in the United States and fluent English speaker About Team UIS: We are Field Service Leaders. Our field people are selected among the brightest Electricians, then trained and tooled to think like Engineers and execute like Professional Technicians. Our staff are selected and kept because they consistently demonstrate our core values. They are honest, trustworthy, make safety priority one, they consistently show a mission-to-serve no matter what the time is, they are committed to on-going learning an essential trait in this complex electrical world, they are professional in the way they approach their work and relate with people and finally, they have a strong desire to share their knowledge thus raise the skills of the people around them. Team UIS has been named one of the Best and Brightest Companies to work for in the Nation. This award recognizes companies that prioritize employee satisfaction, engagement, and well-being. At Team UIS we are committed to creating a positive and supportive workplace culture where our team members can continue to grow. Join Team UIS today. Team UIS is an equal opportunity employer.

About us Contemporary Amperex Technology Kentucky (CATK) is the US battery manufacturing subsidiary of Contemporary Amperex Technology Co., Limited (CATL). CATL is a global leader in research, development and manufacturing of battery energy storage system for vehicles, grid scale, and maritime applications. In 2024, CATL accounts for over 37% of global EV battery installed capacity. CATL has been the largest battery manufacturer in the world for the last 7 years. The Company is committed to providing cutting-edge solutions for global new energy applications. Our Vision Strive to be a global premier innovative technology corporation, deliver excellent contribution to green energy resolution for mankind, and provide a platform of pursuing the spiritual and material well-being for employees! Job Overview: To better serve the global auto industry electric vehicle trend in the United States, CATL, through its U.S.-based subsidiary, CATK, is seeking a talented and experienced Electrical Engineer to join our team. As an Electrical Engineer at CATK, you will lead the design, installation, maintenance, and optimization of electrical systems and equipment. Your role will encompass ensuring compliance with national and local electrical codes, performing load calculations, and recommending energy-efficient technologies to enhance operational efficiency. Essential Functions: Lead the construction and implementation of electrical systems, ensuring adherence to design specifications and regulatory standards. Oversee the installation and commissioning of electrical equipment, conducting thorough testing to ensure functionality and safety. Perform regular maintenance and troubleshooting of electrical systems, promptly resolving technical issues to minimize downtime. Develop and implement policies and procedures to ensure compliance with electrical codes, standards, and safety practices. Collaborate with architects and engineers to perform load calculations, design circuits, and specify equipment for projects. Evaluate and recommend energy-efficient technologies and practices to optimize electrical system performance and reduce operational costs. Develop and maintain professional Standard Operating Procedures (SOPs) for the management and maintenance of electrical systems. Minimum Qualifications: Bachelor's degree in Electrical Engineering or related field; Master's degree preferred. Minimum of 3 years of proven experience in the design, installation, and maintenance of electrical systems. Strong knowledge of electrical codes, standards, and safety practices. Proficiency in AutoCAD, Revit, Navisworks, and BIM software for electrical system design and documentation. Excellent problem-solving and analytical skills, with the ability to analyze complex technical issues and propose effective solutions. Strong communication skills and the ability to collaborate effectively with cross functional teams. Ability to work independently and as part of a team, with a commitment to delivering high-quality work on schedule. Ability to maintain a full-time work schedule with regular in-person attendance is required for this position. Ability to interact professionally with individuals of varied backgrounds and skill level. Physical Requirements: Ability to move around work sites, which may include walking, standing, and climbing ladders or stairs. Flexibility to bend, kneel, or crouch, particularly when inspecting installations or troubleshooting. Capability to lift and carry moderate weights, typically up to 25-50 pounds. Occasional lifting of heavier items may be required. Ability to work in various environments, including offices, construction sites, and manufacturing facilities. Willingness and ability to travel to various job sites, which may require driving or other forms of transportation. Benefits: Competitive salary commensurate with experience. Comprehensive benefits package including medical, dental, and vision coverage. 401(k) retirement savings plan with company match. Paid time off and holidays. Professional development opportunities. ***CATK is an Equal Opportunity Employer*** The information contained herein is not intended to be an all-inclusive list of the duties and responsibilities of the job, nor is it intended to be an all-inclusive list of the skills and abilities required to do the job. The Company may, at its discretion, revise the job description at any time, and additional functions and requirements may be assigned by supervisors as deemed appropriate. Requirements, skills and abilities included have been determined to illustrate the minimal standards required to successfully perform the position.

Contract Duration: Contract through December 30, 2026 (with strong possibility of extension up to 2-3 years) Work Schedule: Hybrid (On-site: Monday, Tuesday, Thursday | Remote: Wednesday, Friday) CMS Energy is seeking a highly skilled Electrical Engineer IV to support the development and execution of renewable generation projects, including solar, wind, and battery energy storage. The successful candidate will work collaboratively with cross-functional teams to ensure projects are designed, integrated, and implemented effectively. This role requires hands-on experience with electrical systems, programmable devices, and substation or generation plant operations. Key Responsibilities Provide engineering and integration support for programmable/configurable devices, substation network devices, and legacy electrical devices in electric substations and generation plants. Assist in the detailed design of multiple projects, supporting CAD design drawings produced by the I&C Division. Develop, test, and integrate intelligent electrical devices (IEDs), including programmable automation controllers, RTUs, protective relays, meters, transformer monitors/controllers, and other control devices. Support renewable energy projects (3-4 concurrent projects), ensuring electrical design and integration requirements are met. Work hands-on in a lab environment to prototype systems, set up tests, and connect/integrate devices. Collaborate with diverse teams, including mechanical, civil, and electrical engineers, to support successful project execution. Maintain clear communication with internal stakeholders and project teams. Required Skills & Qualifications Bachelor's degree in Electrical Engineering from an ABET-accredited program. Positive attitude, strong work ethic, and highly self-motivated. Strong analytical, problem-solving, and organizational skills. Excellent oral and written communication skills;ability to interact effectively with diverse teams and stakeholders. Proficiency in Microsoft Office (Excel, Access, Word). Experience with programmable/configurable devices, such as RTUs, regulator, and recloser controls (desired). Familiarity with IEC-61131 programming suite, DNP 3.0 protocol (serial and IP), and VB.NET or other high-level programming languages (desired). Prior experience with generation plants, substations, or utilities is preferred. Professional Engineer (PE) license not required. Work Environment Hybrid role with in-office presence required Monday, Tuesday, and Thursday. Hands-on work in lab and field environments supporting generation projects.

Under the close and immediate supervision of an engineering mentor, Entry Level Engineers perform routine aspects of engineering assignments requiring knowledge and application of basic engineering principles. Key contributions include performing basic calculations, studies, drawing preparation, and providing technical support to construction staff. This role is largely focused on the ongoing development and application of knowledge of commonly-used concepts, practices, and procedures within a particular field. Job Responsibilities Develops understanding of assigned client standards, policies and procedures by reading and applying specific design guides, standards, systems and applicable engineering codes. Develops an understanding and complies with Commonwealth Associates quality program. Supports continuous improvement and change management efforts by proactively presenting leadership with new suggestions around process and practices innovation. Takes ownership of one's own professional development, striving for high-quality performance; remains self-aware and seeks support, guidance, and mentorship from other more experienced engineers. Attends internal and external client meetings, conference calls and client site visits accompanied by a mentor. In collaboration with the Business Development department, represents the company's emerging professional engineers at career fairs as needed. Supports the needs of the internal project team while gaining basic understanding of external client's main interests, expectations and drivers. Coordinates with project teams, cross-functional teams and other groups within the company to provide information and assistance as directed. Works with administrative staff to coordinate tasks and prepare documents. Collects, assimilates, and manages data for engineering work. Contributes to preparation of engineering deliverables such as drawings, reports, specifications, and studies of limited scope. Performs routine research and develops recommendations for equipment and/or materials selection. Prepares basic engineering calculations following standard methods and principles used in similar engineering analysis. Understands and works within budgeted hours, schedule, and quality requirements. Completes expense reports and timesheets in a timely and accurate manner and seeks direction from supervisor when conflicts arise. Remains aware and demonstrates understanding of project scope management.

Job Description LJ Inc. is a leader in providing cutting-edge industrial, commercial, and residential turn-key solutions and dedicated to delivering exceptional services to our valued customers. With a strong commitment to innovation, quality, and customer satisfaction, we have established ourselves as a trusted name in the industry. Our team is comprised of talented professionals who are passionate about what they do. We believe in providing our employees with the necessary tools, resources, and support to excel in their roles and reach their full potential. At LJ Inc, we strive for excellence in everything we do. We embrace new technologies, methodologies, and industry trends to stay ahead of the curve. Our commitment to continuous improvement and customer satisfaction sets us apart and drives our success. Join our team and become part of a company that values your skills, knowledge, and contribution. Job Summary: The Controls Hardware Engineer is responsible for the design, documentation, and the building of standard and customized industrial control systems for Automation Equipment. This position requires a strong technical ability in the fields of controls and electrical design and is for a motivated individual who enjoys a variety of responsibility. A drive to learn and expand skills and responsibilities is a must. Primary Functions and Responsibilities Documentation of electrical, pneumatic, hydraulic, and cooling systems (i.e.: schematics, ladder diagrams, etc.) Work with other members of the control systems design department and other groups to continuously improve methods of integrating controls technology, with the goals being enhanced safety, enhanced functionality, and reduced cost Must have knowledge and experience using AutoCad to design controls and electrical hardware specific to customer project requirements Knowledge, Skills and Abilities Standard industrial panel designs & components Wiring methods Power distribution wiring Communications layout Voltage levels and types and their isolation MS Office Suite Fieldbus Technologies (ex: Ethernet, IOLink) Machine labeling syntax of electrical wiring, components, hoses, etc. and how to document this information in the schematics Component sizing and wiring Interfacing and communication with devices; analog, fieldbus, etc. Risk Analysis Minimum Qualifications One or more of the following: 3 years of on the job working in AutoCAD and Excel 3 years of on the job work experience in controls design, primarily focused in Industrial Automation Understand and able to apply CE, UL, NFPA, RIA, etc. electrical requirements and standards to designs Knowledge of electrical, pneumatic, and hydraulic schematics and how these systems interact Ability to adapt to/learn new controls technology and software Ability to work effectively and efficiently with minimal supervision Understanding and communicating technical details Special Position Requirements Requires excellent problem-solving skills, with the ability to find ways to work under pressure and still make deadlines without cutting corners or endangering the integrity of the equipment and/or the employer as a whole. Willingness to participate in internal training to expand technical background Organizational skills and the ability to multi-task, taking on several projects at once. Capable of reading electrical drawings in JIC as well as IEC standards Requires ability to interact professionally with other departments, customers and suppliers Ability to analyze problems, specify solutions and implement solutions. Work Environment Operation in a professional office environment as well as machine build environment Expectation of an average of 40 - 50 hours per week Ability to travel up to 5% Ability to work in a standing position for long periods What we offer: Competitive compensation 100% company paid health insurance for employee and dependents 100% company paid dental and vision for employee and dependents 401k with 3% company match Overtime after 8 hours PTO and vacation time And much more! LOCAL APPLICANTS ONLY Job Posted by ApplicantPro

100% onsite in Chelsea, Michigan -3rd Shift - 12:00AM - 8:00AM Emissions Lab Hardware Engineer Work as part of team including engineers, union technicians, and mechanics to troubleshoot and resolve test equipment issues for Emissions Chassis Dynamometer test cells, SHEDs, and other emissions testing equipment. Perform Quality Control and Calibration activities to satisfy regulatory and internal department requirements, including tracking and documentation. Support new test cell equipment integration to support new regulatory and powertrain testing community requirements. Work on projects to improve test cell efficiencies and throughput. Analyze test results and validate tests to ensure compliance with regulatory and internal criteria. Requirements: 3rd Shift - 12:00AM - 8:00AM Basic Requirements: Bachelor of Science degree in Mechanical or Electrical Engineering or equivalent Engineering discipline Minimum of 2 years experience in automotive testing, preferably experience with Vehicle or Engine Emissions testing equipment, including chassis dynamometers, analyzers, instrumentation, sampling systems, data acquisition (National Instrument Devices), PLCs, and Diesel/GDI Particulate Sampling. Proficient in the use of Microsoft Applications Ability to understand, interpret and analyze data with attention to detail Must be a team player with ability to work with diverse group of engineers, supervisors, and UAW personnel Exceptional organizational skills and the ability to manage multiple jobs and projects simultaneously Analytical skills with a focus on root cause analysis Self-motivated with good communication skills Must be willing to work overtime and weekends as needed to support critical test timelines Preferred Requirements: 5 years experience working in a testing lab with vehicle or engine emissions testing equipment, including dynamometers, analyzers, instrumentation, sampling systems, data acquisition and Diesel/GDI Particulate Sampling Familiar with ETAS/INCA and experience using HORIBA analyzer bench software Experience with PEMS and RDE certification, LDV knowledge, data post processing and analysis Familiar with particulate measurement 5+ years of engine test support with an emphasis on test cell instrumentation & facility systems Prior project management training or experience Additional Must Haves: Understanding of mechanical and electrical prints needed to troubleshoot and root cause issues on equipment used throughout the emissions test lab. Ability to understand, interpret and analyze data with attention to detail. Must be willing to work overtime and weekends as needed to support critical test timelines. Possess the needed technical knowledge, communication, and organizational skills necessary to coordinate and manage suppliers, contractors, and internal trades. Location of the position: Chelsea, Michigan - 100% onsite -3rd Shift - 12:00AM - 8:00AM No driving a company vehicle required Amount of travel: 0-10% in Auburn Hills Contract to hire opportunity

LJ Inc. is a leader in providing cutting-edge industrial, commercial, and residential turn-key solutions and dedicated to delivering exceptional services to our valued customers. With a strong commitment to innovation, quality, and customer satisfaction, we have established ourselves as a trusted name in the industry. Our team is comprised of talented professionals who are passionate about what they do. We believe in providing our employees with the necessary tools, resources, and support to excel in their roles and reach their full potential. At LJ Inc, we strive for excellence in everything we do. We embrace new technologies, methodologies, and industry trends to stay ahead of the curve. Our commitment to continuous improvement and customer satisfaction sets us apart and drives our success. Join our team and become part of a company that values your skills, knowledge, and contribution. Job Summary: The Controls Hardware Engineer is responsible for the design, documentation, and the building of standard and customized industrial control systems for Automation Equipment. This position requires a strong technical ability in the fields of controls and electrical design and is for a motivated individual who enjoys a variety of responsibility. A drive to learn and expand skills and responsibilities is a must. Primary Functions and Responsibilities Documentation of electrical, pneumatic, hydraulic, and cooling systems (i.e.: schematics, ladder diagrams, etc.) Work with other members of the control systems design department and other groups to continuously improve methods of integrating controls technology, with the goals being enhanced safety, enhanced functionality, and reduced cost Must have knowledge and experience using AutoCad to design controls and electrical hardware specific to customer project requirements Knowledge, Skills and Abilities Standard industrial panel designs & components Wiring methods Power distribution wiring Communications layout Voltage levels and types and their isolation MS Office Suite Fieldbus Technologies (ex: Ethernet, IOLink) Machine labeling syntax of electrical wiring, components, hoses, etc. and how to document this information in the schematics Component sizing and wiring Interfacing and communication with devices; analog, fieldbus, etc. Risk Analysis Minimum Qualifications One or more of the following: 3 years of on the job working in AutoCAD and Excel 3 years of on the job work experience in controls design, primarily focused in Industrial Automation Understand and able to apply CE, UL, NFPA, RIA, etc. electrical requirements and standards to designs Knowledge of electrical, pneumatic, and hydraulic schematics and how these systems interact Ability to adapt to/learn new controls technology and software Ability to work effectively and efficiently with minimal supervision Understanding and communicating technical details Special Position Requirements Requires excellent problem-solving skills, with the ability to find ways to work under pressure and still make deadlines without cutting corners or endangering the integrity of the equipment and/or the employer as a whole. Willingness to participate in internal training to expand technical background Organizational skills and the ability to multi-task, taking on several projects at once. Capable of reading electrical drawings in JIC as well as IEC standards Requires ability to interact professionally with other departments, customers and suppliers Ability to analyze problems, specify solutions and implement solutions. Work Environment Operation in a professional office environment as well as machine build environment Expectation of an average of 40 - 50 hours per week Ability to travel up to 5% Ability to work in a standing position for long periods What we offer: Competitive compensation 100% company paid health insurance for employee and dependents 100% company paid dental and vision for employee and dependents 401k with 3% company match Overtime after 8 hours PTO and vacation time And much more! LOCAL APPLICANTS ONLY

About us Contemporary Amperex Technology Kentucky (CATK) is the US battery manufacturing subsidiary of Contemporary Amperex Technology Co., Limited (CATL). CATL is a global leader in research, development and manufacturing of battery energy storage system for vehicles, grid scale, and maritime applications. In 2024, CATL accounts for over 37% of global EV battery installed capacity. CATL has been the largest battery manufacturer in the world for the last 7 years. The Company is committed to providing cutting-edge solutions for global new energy applications. Our Vision Strive to be a global premier innovative technology corporation, deliver excellent contribution to green energy resolution for mankind, and provide a platform of pursuing the spiritual and material well-being for employees! Job Overview: To better serve the global auto industry electric vehicle trend in the United States, CATL, through its U.S.-based subsidiary, CATK, is seeking a talented and dedicated PLC Control Systems Engineer to join our team. As a PLC Control Systems Engineer at CATK, you will oversee the programming, maintenance, and optimization of PLC control systems to streamline facility processes. You will play a crucial role in troubleshooting system issues, implementing upgrades, and ensuring compliance with safety standards and regulations. Collaboration with other engineering teams will be essential to integrate automation solutions effectively across our operations. Essential Functions: Program PLC control systems for various facility processes to automate and optimize operations. Troubleshoot and resolve issues with PLC hardware and software to maintain system reliability. Conduct regular maintenance and implement upgrades to automation systems to improve efficiency. Develop and implement control strategies to optimize system performance and productivity. Establish policies and procedures to ensure compliance with safety standards and regulations. Collaborate with other engineering disciplines to integrate PLC systems with existing infrastructure. Develop Standard Operating Procedures (SOPs) for PLC operation and maintenance. Minimum Qualifications: Bachelor's degree in Automation, Electrical Engineering, or a related field. 3+ years of experience in PLC programming and control system development. Familiarity with major PLC brands (e.g., Siemens, Schneider, Omron) and programming languages. Proficient in AutoCAD, Revit, Navisworks, and BIM software. Ability to read and interpret electrical schematics and technical manuals. Excellent problem-solving and analytical skills, with the ability to analyze complex technical issues and propose effective solutions. Strong communication skills and the ability to collaborate effectively with cross- functional teams. Ability to work independently and as part of a team, with a commitment to delivering high-quality work on schedule. Ability to maintain a full-time work schedule with regular in-person attendance is required for this position. Ability to interact professionally with individuals of varied backgrounds and skill level. Physical Requirements: Ability to move around work sites, which may include walking, standing, and climbing ladders or stairs. Flexibility to bend, kneel, or crouch, particularly when inspecting installations or troubleshooting. Capability to lift and carry moderate weights, typically up to 25-50 pounds. Occasional lifting of heavier items may be required. Ability to work in various environments, including offices, construction sites, and manufacturing facilities. Willingness and ability to travel to various job sites, which may require driving or other forms of transportation. Benefits: Competitive salary commensurate with experience. Comprehensive benefits package including medical, dental, and vision coverage. 401(k) retirement savings plan with company match. Paid time off and holidays. Professional development opportunities. ***CATK is an Equal Opportunity Employer*** The information contained herein is not intended to be an all-inclusive list of the duties and responsibilities of the job, nor is it intended to be an all-inclusive list of the skills and abilities required to do the job. The Company may, at its discretion, revise the job description at any time, and additional functions and requirements may be assigned by supervisors as deemed appropriate. Requirements, skills and abilities included have been determined to illustrate the minimal standards required to successfully perform the position.

LJ Inc. is a leader in providing cutting-edge industrial, commercial, and residential turn-key solutions and dedicated to delivering exceptional services to our valued customers. With a strong commitment to innovation, quality, and customer satisfaction, we have established ourselves as a trusted name in the industry. Our team is comprised of talented professionals who are passionate about what they do. We believe in providing our employees with the necessary tools, resources, and support to excel in their roles and reach their full potential. At LJ Inc, we strive for excellence in everything we do. We embrace new technologies, methodologies, and industry trends to stay ahead of the curve. Our commitment to continuous improvement and customer satisfaction sets us apart and drives our success. Join our team and become part of a company that values your skills, knowledge, and contribution. Job Summary: The Controls Hardware Engineer is responsible for the design, documentation, and the building of standard and customized industrial control systems for Automation Equipment. This position requires a strong technical ability in the fields of controls and electrical design and is for a motivated individual who enjoys a variety of responsibility. A drive to learn and expand skills and responsibilities is a must. Primary Functions and Responsibilities * Documentation of electrical, pneumatic, hydraulic, and cooling systems (i.e.: schematics, ladder diagrams, etc.) * Work with other members of the control systems design department and other groups to continuously improve methods of integrating controls technology, with the goals being enhanced safety, enhanced functionality, and reduced cost * Must have knowledge and experience using AutoCad to design controls and electrical hardware specific to customer project requirements Knowledge, Skills and Abilities * Standard industrial panel designs & components * Wiring methods * Power distribution wiring * Communications layout * Voltage levels and types and their isolation * MS Office Suite * Fieldbus Technologies (ex: Ethernet, IOLink) * Machine labeling syntax of electrical wiring, components, hoses, etc. and how to document this information in the schematics * Component sizing and wiring * Interfacing and communication with devices; analog, fieldbus, etc. * Risk Analysis Minimum Qualifications * One or more of the following: * 3 years of on the job working in AutoCAD and Excel * 3 years of on the job work experience in controls design, primarily focused in Industrial Automation * Understand and able to apply CE, UL, NFPA, RIA, etc. electrical requirements and standards to designs * Knowledge of electrical, pneumatic, and hydraulic schematics and how these systems interact * Ability to adapt to/learn new controls technology and software * Ability to work effectively and efficiently with minimal supervision * Understanding and communicating technical details Special Position Requirements * Requires excellent problem-solving skills, with the ability to find ways to work under pressure and still make deadlines without cutting corners or endangering the integrity of the equipment and/or the employer as a whole. * Willingness to participate in internal training to expand technical background * Organizational skills and the ability to multi-task, taking on several projects at once. * Capable of reading electrical drawings in JIC as well as IEC standards * Requires ability to interact professionally with other departments, customers and suppliers * Ability to analyze problems, specify solutions and implement solutions. Work Environment * Operation in a professional office environment as well as machine build environment * Expectation of an average of 40 - 50 hours per week * Ability to travel up to 5% * Ability to work in a standing position for long periods What we offer: * Competitive compensation * 100% company paid health insurance for employee and dependents * 100% company paid dental and vision for employee and dependents * 401k with 3% company match * Overtime after 8 hours * PTO and vacation time * And much more! LOCAL APPLICANTS ONLY

Emissions Lab Hardware Engineer Work as part of team including engineers, union technicians, and mechanics to troubleshoot and resolve test equipment issues for Emissions Chassis Dynamometer test cells, SHEDs, and other emissions testing equipment. Perform Quality Control and Calibration activities to satisfy regulatory and internal department requirements, including tracking and documentation. Support new test cell equipment integration to support new regulatory and powertrain testing community requirements. Work on projects to improve test cell efficiencies and throughput. Analyze test results and validate tests to ensure compliance with regulatory and internal criteria. Basic Requirements: Bachelor of Science degree in Mechanical or Electrical Engineering or equivalent Engineering discipline Minimum of 2 years experience in automotive testing, preferably experience with Vehicle or Engine Emissions testing equipment, including chassis dynamometers, analyzers, instrumentation, sampling systems, data acquisition (National Instrument Devices), PLCs, and Diesel/GDI Particulate Sampling. Proficient in the use of Microsoft Applications Ability to understand, interpret and analyze data with attention to detail Must be a team player with ability to work with diverse group of engineers, supervisors, and UAW personnel Exceptional organizational skills and the ability to manage multiple jobs and projects simultaneously Analytical skills with a focus on root cause analysis Self-motivated with good communication skills Must be willing to work overtime and weekends as needed to support critical test timelines Preferred Requirements: 5 years experience working in a testing lab with vehicle or engine emissions testing equipment, including dynamometers, analyzers, instrumentation, sampling systems, data acquisition and Diesel/GDI Particulate Sampling Familiar with ETAS/INCA and experience using HORIBA analyzer bench software Experience with PEMS and RDE certification, LDV knowledge, data post processing and analysis Familiar with particulate measurement 5+ years of engine test support with an emphasis on test cell instrumentation & facility systems Prior project management training or experience Additional Must Haves: Understanding of mechanical and electrical prints needed to troubleshoot and root cause issues on equipment used throughout the emissions test lab. Ability to understand, interpret and analyze data with attention to detail. Must be willing to work overtime and weekends as needed to support critical test timelines. Possess the needed technical knowledge, communication, and organizational skills necessary to coordinate and manage suppliers, contractors, and internal trades. Location of the position: Chelsea, Michigan - 100% onsite - 2 positions for 3 rd Shift / 1 position for 2nd shift No driving a company vehicle required Amount of travel: 0-10% to Auburn Hills, MI Contract to hire opportunity