Superior Energy Services jobs in Midland, TX - 94 jobs

General Purpose of the Job Assist Management by positively influencing the First Time Right culture through education and motivating individuals to fulfill their HSE responsibilities. Communicate with field locations throughout North America West Land Region to implement health, safety, environment & training programs, ensuring compliance with federal, state, and local regulations and company standards. Essential Duties and Responsibilities Provides support to Business Unit Management for site-based safety requirements including the development and maintenance of site-specific HSE procedures, Risk Assessments, Job Safety Analyses, Safety Meetings, Auditing, Emergency Action Plans, coaching, mentoring and training site personnel Makes suggestions to improve the HSE Management System (including policies, procedures and training programs) Facilitates the development of HSE goals and objectives by providing technical information as needed Supports the execution of HSE objectives in order to achieve established HSE goals Serves as a role model for personal protective equipment, safe work practices, environmental stewardship practices and teamwork Participates in identifying, eliminating, and mitigating hazards and potential risks Identifies unsafe behavior and assist Management with its elimination through SHARP observations Interfaces and negotiates with customers and contractors as needed Incorporates HSE standards directed by regulatory agencies into policies, plans and programs to meet compliance requirements and prevent incidents Coaches all levels of employees to elicit continuous HSE improvement Participates in investigations of worksite incidents, injuries, prepares reports and assists with employee medical needs as required Participates in internal HSE audits as directed Prepares and review HSE forms, reports, plans, and permits Maintains orderly HSE record-keeping Analyzes statistical, behavior-based data to develop improvement plans Participates in preparation of Customer HSE audits Maintain communication with injured employees and corresponding Management personnel to ensure proper medical care Minimum Requirements Minimal of two years of experience in processes involving oil and gas rental products. HSE experience preferred. Technical Skills Familiarity of federal, state and local regulations, including but not limited to OSHA, EPA, TCEQ, DOT, FMCSA, NRC, SEMS, and BOEMRE. Ability to read, analyze, and interpret general business periodicals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedures and effectively present information and responses to groups of managers and customers. Ability to use and apply general to advanced mathematical skills and concepts. Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables. Knowledge of corporate HSE policies and practices. Knowledge of current practices and technology used in the oil and gas industry. Strong troubleshooting skills. Knowledge of Microsoft Office Suite. Behavioral Abilities Ability to accurately complete/maintain necessary reports/records in a timely and legible manner according to applicable procedures and/or work orders. Ability to effectively communicate written and verbally at all levels within the organization. Ability to work effectively and cooperatively with all employees. Ability to lead by example and work well within teams. Excellent Benefits: Medical, Dental, Vision, Disability, Life, Matching 401(k) The above statements are not intended to be an exhaustive list of all responsibilities, duties, and skills required of personnel so classified; nothing restricts the company's right to change, assign, or reassign duties and responsibilities at any time or for any reason. To be considered for this position, please select the link “Apply for this job online”.

Specific Responsibilities The Lease Operator Sr is a first-level supervisor, under the direction and training of the foreman. The Lease Operator Sr is responsible for the coordination and onsite supervision of contractors and service companies during new-well completions and workovers and performs other related assigned duties. Gauge production on assigned wells, and report gauge readings, downtime and other pertinent well information to district office. Perform lease maintenance such as minor surface pump and production equipment repairs and adjustments; trim weeds, clean up trash, etc.; change stuffing boxes, grease pumping units, service lease equipment, etc. Note problems and/or recommend courses of actions to supervisor in order to decrease costs and increase production. Assist in witnessing meter calibrations; monitor rates and pressures on injection and disposal wells; make necessary adjustments; monitor chemical use; shoot fluid levels as required and test safety systems daily to maximize daily production. Assist with downhole pump changes, tubing replacement, etc. on artificially lifted wells; assist with pump and compressor maintenance such as oil changes, obtaining oil sample for analysis, pulling compressor valves, tests and repairs. Perform work in a manner that ensures the secure and environmentally safe operation of all wells and leases for which pumper is responsible. Conduct other tasks as required by supervisor which are unique to the assigned geographic area. Qualifications & Experience The successful candidate will have the following qualifications and experience: High school diploma 10+ years of relevant experience Must have a general knowledge of safe oil and gas production operations. Must have an interest in gaining knowledge of engineering principles and an understanding of subsurface and surface equipment and operations. Must be able to perform simple mathematic calculations, have good mechanical aptitude, good writing skills and have a good safety and driving record. Demonstrated proficiency with PC based computer applications. Competencies The successful candidate should demonstrate and exhibit the following core competencies: Communication: Writes, speaks, and presents information effectively and persuasively across communication setting; Results: Pursues work with energy, drive, and results orientation to positively impact Apache's business success; Collaboration: Works in partnership with others and encourages different perspectives, while building and maintaining trust; and Culture: Willingness and ability to align one's behavior with the needs, priorities, and goals of Apache. Company Overview Our primary product is energy, and where there is affordable, abundant energy, people are healthier, have access to better education, and are given greater opportunities to elevate their families to higher standards of living. Nearly 3 billion people - roughly one-third of the global population - live without electricity or without clean cooking facilities. We are committed to providing energy in innovative and more sustainable ways to help raise the standard of living for those living in energy poverty and to meet the ongoing demands of people and economies around the world. The products we deliver power increasingly cleaner electricity across the globe, fuel tractors and trucks, make fertilizer to keep the world's food supply on the table, and heat our schools, hospitals and businesses. Our employees bring a wide range of talents and skills to the job every day to tackle complex business challenges. We believe in providing a truly rewarding work environment supported by a benefits platform that ranks among the best in our peer group. Our company offers career development opportunities where employees can grow personally and professionally. We promote employee benefits that cultivate a family-friendly work environment and focus on our employees' overall well-being. We are committed to being a workplace where all employees are valued and can thrive with a sense of belonging. Our commitment to non-discriminatory, equal employment opportunities benefits our individual employees, our company and our external stakeholders; we are better as an organization when various experiences, ideas, and perspectives are brought to the table. Apache Corporation is a wholly owned subsidiary of APA Corporation (NASDAQ:APA). Apache has operations in the United States, Egypt's Western Desert and the United Kingdom's North Sea and a sister company with exploration opportunities offshore Suriname. Whether supporting Apache, APA Corporation or one of its subsidiaries, team members are employed by Apache Corporation. For additional information about APA Corporation, please visit: Portfolio Sustainability Investors *************** Apache Statement on Hiring To provide genuine equal opportunity to all people, it is the policy of Apache Corporation and its subsidiaries to base all employment-related decisions and actions exclusively on employment-related criteria. To provide genuine equal opportunity to all people, it is the policy of Apache Corporation and its subsidiaries to provide broad dissemination of job opportunities, as consistent with the nature of the positions. To provide genuine equal opportunity to all people, it is the policy of Apache Corporation and its subsidiaries to review its employment-related policies and actions on a regular basis to ensure that their application is consistent with their intent. Equal Employment Opportunity

Enterprise Products Partners L.P. is one of the largest publicly traded partnerships and a leading North American provider of midstream energy services to producers and consumers of natural gas, NGLs, crude oil, refined products and petrochemicals. Our services include: natural gas gathering, treating, processing, transportation and storage; NGL transportation, fractionation, storage and import and export terminals; crude oil gathering, transportation, storage and terminals; petrochemical and refined products transportation, storage and terminals; and a marine transportation business that operates primarily on the United States inland and Intracoastal Waterway systems. The partnership's assets include approximately 50,000 miles of pipelines; 260 million barrels of storage capacity for NGLs, crude oil, refined products and petrochemicals; and 14 billion cubic feet of natural gas storage capacity. * This position includes a $10,000 Sign-on Bonus, as well as other "location" incentives* The Plant Operator is responsible for the day-to-day operations and maintenance of natural gas amine treating plants, compressors and pipeline systems via both computer control center and onsite operations. Other responsibilities include, but are not limited to: * Operate natural gas plant and pipeline equipment including, but not limited to: amine treating plants, chilled water gas conditioning skids, reciprocating natural gas compressors, TEG dehydrators, fluid separation equipment, valves, gas measurement equipment, etc. * Operate plant equipment & system. * Start-up/Shutdown of plant equipment. * Adjust controls to operate equipment in the recommended or prescribed operating ranges. * Visually inspect equipment and controls at periodic intervals to detect malfunctions or need for repair, adjustment or lubrication. * De-pressure equipment and pipelines. * Operate valves. * Monitor plant and pipeline operations and respond to emergency or upset conditions. * Operate under Process Safety Management (PSM) as required. * Implement safe work practices and participate in proactive safety culture while ensuring safety for the employee, public and environment at all times. * Monitor gas gathering system through SCADA and make calls to alert customers of situations that could affect gas deliveries. * Ensure regulatory compliance and record keeping requirements are met and continually monitored. * Read, monitor and record various operating conditions such as pressure, temperature, hours of operations, fuel consumed, water levels, etc. * Perform minor maintenance on equipment including, but not limited to: reciprocating natural gas compressors, TEG dehydrators, fluid separation equipment, valves, etc. * Monitor, remove and replace filters, oil, chemicals, other lubricating fluids, gaskets, and valves as needed. * Change gauges. * Maintain sites in a clean condition including picking up/taking out trash, control weeds and grassy areas, minor painting, etc. * Clean out site glasses as necessary. * Change out suction/discharge valves on natural gas compressors, light bulbs, and fuses. * Improve upon meeting the needs and demands of customers. * Maintain a near perfect driving record. * Direct and supervise contract labor involved in plant maintenance activities. * Collaborate with direct supervisor on new and improved ideas associated with an evolving plant and pipeline system. * Work a rotating 12 hour shift schedule. #IND123 The successful candidate will meet the following qualifications: * A minimum of a high school diploma or G.E.D. equivalent is required. * Technical certification or equivalent training in a mechanical environment or energy related field is preferred. * A valid driver's license with acceptable driving record is required. * May be required to participate in the Respiratory Protection Program and wear respirator to perform tasks * Knowledge of the operation, control and general design of various kinds of systems typically present in a processing or fractionation plant is required. * The ability to perform basic mathematical calculations, such as, percentages, ratios and proportions to practical solutions is required. * Basic computer skills such as: opening, creating and updating content in MS Word documents and Excel spreadsheets is required. * Ability to assume responsibility, be flexible, perform duties and handle multiple tasks under potentially stressful and/or hazardous conditions. * The ability to effectively communicate, both verbally and in writing, with other individuals, teams, customers, and stakeholders of the business, at various levels of the organization, in a business like and professional manner is required. * The ability to modify communication style in order to influence, persuade, negotiate, and engage all parties according to the audience and circumstance is required. * Takes initiative and is proactive in addressing issues. Quickly and efficiently completes tasks. * The ability to demonstrate conscientiousness, dependability and commitment to the role, team and company. * The ability to work in a fast paced environment with less definition, policy, and bureaucracy. * Works indoors and outdoors in and around industrial and electrical equipment. * Works in temperature extremes due to weather conditions and operating equipment. * Uses physical force to lift, push, pull and hold equipment and tools. * Climbs and works at various heights and may work in a standing, sitting, lying down, crouched or kneeling position. * Routinely reacts to visual, aural and other signals, including alarms and instructions, and is required to visually inspect work. * May work in confined spaces (i.e. tanks, between compressors, vessels). * Must be able to regularly bend, stoop, move from ground level to higher levels, raise/lift from ground level and lift up to 50 lbs., manually transport a load up to 75 lbs., apply up to 100 foot pounds of torque. * Must have ability to get in and out of vehicles regularly and ride over rough roads. * Must be available to work a 12 hour rotating shift schedule and/or respond to call-outs as necessary

Specific Responsibilities The Area Operations Manager will be responsible for overseeing production operations in the Midland Basin, providing leadership to field teams and ensuring safe, efficient, and cost-effective operations aligned with Apache's strategic goals. Key Responsibilities: * Ensure Compliance: Maintain adherence to Apache's EHS standards, quality protocols, and all applicable health and safety regulations. * Leadership & Direction: Provide clear leadership for all employees and contractors across production and electrical operations. * Cross-Functional Alignment: Collaborate closely with cross-functional departments to ensure operational efforts are aligned with broader company objectives. * Contractor Management: Develop and maintain strong relationships with contractors to ensure safe, reliable, and cost-efficient operations. * Performance Optimization: Monitor and evaluate production performance and expense data to identify optimization opportunities. Participate in monthly management reviews of operational results. * Team Development: Foster staff development through goal setting, performance feedback, training, and thoughtful work assignments. * Operational Planning: Coordinate future operational activities and ensure clear communication of plans and outcomes to team members and leadership. * Organizational Leadership: Cultivate a culture of continuous improvement, collaboration, and accountability within the operations team. Mentor and develop employees to support long-term career growth. * Production Oversight: Work closely with engineers and field operators to conduct frequent production reviews. Participate in detailed periodic production meetings. * Production & Cost Management: Drive production efficiency and cost control. Seek and implement innovative production enhancement solutions. * Regulatory Compliance: Ensure all company and contract personnel follow operating and regulatory procedures to maximize safety, value, and efficiency. Qualifications & Experience The successful candidate will have the following qualifications and experience: * High School Diploma or equivalent required * 8 to 15 years of relevant E&P company experience in Production Operations and/or Engineering. * College degree preferred but not required * Strong communication and organizational skills - able to work well with field personnel, peers, management and stakeholders * Able to prioritize multiple projects * High degree of initiative and independent judgment * Strong analytical and problem-solving abilities. * Capability to perform duties with a high level of accuracy. * Ability to organize work, engage in a variety of tasks simultaneously and consistently meet deadlines. * Strong computer skills. * Excellent oral and written communication skills. Competencies The successful candidate will lead by example through successfully demonstrating the following: * Core Competencies * Communication: Writes, speaks, and presents information effectively and persuasively across communication setting; * Results: Pursues work with energy, drive, and results orientation to positively impact Apache's business success; * Collaboration: Works in partnership with others and encourages different perspectives, while building and maintaining trust; and * Culture: Willingness and ability to align one's behavior with the needs, priorities, and goals of Apache. * Leadership Competencies * Servant Leadership: Inspires and enables performance excellence through feedback, empathy, development and empowerment; * Strategic Mindset: Applies business acumen to see the big picture, understand business issues, and exhibit financial stewardship; * Change Leadership: Inspires change by challenging the status quo, generating support, and executing improvement projects to achieve business outcomes; and * Leading Effective Teams: Enables performance excellence through effective structure, delegation, and motivation. Company Overview Our primary product is energy, and where there is affordable, abundant energy, people are healthier, have access to better education, and are given greater opportunities to elevate their families to higher standards of living. Nearly 3 billion people - roughly one-third of the global population - live without electricity or without clean cooking facilities. We are committed to providing energy in innovative and more sustainable ways to help raise the standard of living for those living in energy poverty and to meet the ongoing demands of people and economies around the world. The products we deliver power increasingly cleaner electricity across the globe, fuel tractors and trucks, make fertilizer to keep the world's food supply on the table, and heat our schools, hospitals and businesses. Our employees bring a wide range of talents and skills to the job every day to tackle complex business challenges. We believe in providing a truly rewarding work environment supported by a benefits platform that ranks among the best in our peer group. Our company offers career development opportunities where employees can grow personally and professionally. We promote employee benefits that cultivate a family-friendly work environment and focus on our employees' overall well-being. We are committed to being a workplace where all employees are valued and can thrive with a sense of belonging. Our commitment to non-discriminatory, equal employment opportunities benefits our individual employees, our company and our external stakeholders; we are better as an organization when various experiences, ideas, and perspectives are brought to the table. Apache Corporation is a wholly owned subsidiary of APA Corporation (NASDAQ:APA). Apache has operations in the United States, Egypt's Western Desert and the United Kingdom's North Sea and a sister company with exploration opportunities offshore Suriname. Whether supporting Apache, APA Corporation or one of its subsidiaries, team members are employed by Apache Corporation. For additional information about APA Corporation, please visit: Portfolio Sustainability Investors *************** Apache Statement on Hiring To provide genuine equal opportunity to all people, it is the policy of Apache Corporation and its subsidiaries to base all employment-related decisions and actions exclusively on employment-related criteria. To provide genuine equal opportunity to all people, it is the policy of Apache Corporation and its subsidiaries to provide broad dissemination of job opportunities, as consistent with the nature of the positions. To provide genuine equal opportunity to all people, it is the policy of Apache Corporation and its subsidiaries to review its employment-related policies and actions on a regular basis to ensure that their application is consistent with their intent. Equal Employment Opportunity

Enterprise Products Partners L.P. is one of the largest publicly traded partnerships and a leading North American provider of midstream energy services to producers and consumers of natural gas, NGLs, crude oil, refined products and petrochemicals. Our services include: natural gas gathering, treating, processing, transportation and storage; NGL transportation, fractionation, storage and import and export terminals; crude oil gathering, transportation, storage and terminals; petrochemical and refined products transportation, storage and terminals; and a marine transportation business that operates primarily on the United States inland and Intracoastal Waterway systems. The partnership's assets include approximately 50,000 miles of pipelines; 260 million barrels of storage capacity for NGLs, crude oil, refined products and petrochemicals; and 14 billion cubic feet of natural gas storage capacity. The Maintenance Planner will plan and schedule weekly maintenance work schedules for crude oil pipeline and facilities. Responsibilities include, but are not limited to: * Process work requests into work orders for assigned areas. * Develop job plans and coordinate all job planning and preparation for scheduled work. * Coordinate the development of all required (regulatory, company and general practice) routine and preventative maintenance procedures and schedules. * Generate requisitions for the materials and contract services required to execute planned jobs. Assure all materials, equipment and support is available prior to scheduling the work to be performed. * Perform job cost estimating and tracking. * Will have the Inventory Warehouse responsibility. * Schedule all active P3 work orders in a four week operational demand-based schedule. Work with operations/maintenance supervision to lock in the subsequent one week schedule. * Perform weekly work order updates with supervision to maintain an active back log of jobs. * Publish the plan of the week for operations and maintenance to review and prepare for the coming distribute crew back logs for completion updates and to obtain scheduling feedback. * Produce and post the weekly KPI reports and other information as required using a maintenance workorder system. * Generate and maintain assets and asset bill of materials in Oracle. * Attend all scheduled planner/scheduler training and assistance with training of new employees or as needed. * Will interact with maintenance, plant and pipeline operations department as well as external customers. The successful candidate will meet the following qualifications: * High school diploma or equivalent is required. * Previous experience in maintenance and operations of crude oil pipelines. * Have or develop a broad knowledge of administrative operating procedures in order to effectively comply with company policies and regulatory requirements. * Specific training and/or experience in computer use including the use of word processing, spreadsheet, email, and maintenance management software is essential. * Technical certification or associates degree or equivalent training in a process or mechanical environment or energy related field is preferred. * Experience with coordinating maintenance-related work including ordering supplies/materials, scheduling contractors and producing job plans is required. * Light lifting, squatting and climbing in an industrial setting. * Proficiency required in general computer use including word processing, spreadsheets, and email. * Experience using maintenance management software is preferred. * Must have effective organizational skills. * Must be a team player that interacts effectively with co-workers in a group or in independent cooperative activities. * Must possess excellent communications skills and have a desire to be a part of a work group that strives for excellence in service to customers and the company. * Must be accountable and self-driven to learn and continuously strive for improvement.

Enterprise Products Partners L.P. is one of the largest publicly traded partnerships and a leading North American provider of midstream energy services to producers and consumers of natural gas, NGLs, crude oil, refined products and petrochemicals. Our services include: natural gas gathering, treating, processing, transportation and storage; NGL transportation, fractionation, storage and import and export terminals; crude oil gathering, transportation, storage and terminals; petrochemical and refined products transportation, storage and terminals; and a marine transportation business that operates primarily on the United States inland and Intracoastal Waterway systems. The partnership's assets include approximately 50,000 miles of pipelines; 260 million barrels of storage capacity for NGLs, crude oil, refined products and petrochemicals; and 14 billion cubic feet of natural gas storage capacity. The Piping Design Coordinator works closely with the Project Manager, Field Engineering, Operations and Maintenance on multiple projects, to coordinate the development of projects from inception to completion. This is accomplished by providing and tracking the exchange of information to all stakeholders, including the corporate design team, third party engineering contractors, installation contractors, and operations, related to the areas of design and drafting; so to ensure that all relevent and necessary Company or industry standard specifications are followed. The Piping Design Coordinator must have proven experience, skills, and ability in resolving technical disputes, expediting work flow, and meeting project deadlines as it relates to project design and drafting requirements. The Piping Design Coordinator responsibilities include, but are not limited to: * Facilitate project design and drafting management as necessary to ensure the successful completion of all project related activities. Detailed items include: * Providing standardized PFD / P&ID symbology for drawing development * Providing / Verifying equipment, instrument, and valve tagging numbers * Providing / Verifying piping line numbers * Initiating and providing new Facility Codes for grass root facility projects. * Resolving drawing development issues * Working with 3rd parties to identify existing drawings for editing * Reviewing and identifying any deviation from the Company standards for drawing development * Perform technical and administrative reviews of design packages submitted by third parties to ensure compliance with all relevant Company specifications, industry codes and standards, and accepted practices. Details include: * Reviewing project "Issued" drawings * Reviewing project "As-Built" drawings * Preparation of process flow diagrams (PFD), piping & instrument diagrams (P&ID), general equipment layouts, facility plot plans, and equipment and instrument lists for various company plant, pipeline and related facilities construction projects. * Assist in the development of Project Scopes, Engineering / Design Scopes, and Construction Scopes of Work, for use in the establishment of contracts with third parties. * Attend project meetings to obtain full understanding of customer needs and scope definitions, and to provide technical input toward efficient and effective designs. * Assist in the review of man hour estimates and work schedules to assure efficiency in the execution of projects. * Coordinate the distribution of design packages related to projects to ensure that all stakeholders are allowed input, and that all necessary information is exchanged. * Provide design and drafting services for time / budget critical projects. * Provide design and drafting services associated with the preliminary development of potential projects. * Create parts lists by performing material take-offs to ensure the timely availability of items. * Maintain record of documents and correspondence pertaining to technical design issues throughout the development of projects. * Participate in the development and maintenance of Company standard drawings. * Maintain a high level of expertise in necessary areas of design and drafting and ensure access to specialty resources and technology. * Provide necessary guidance and instruction to support staff so to ensure efficiency in the daily operation of the department. * Assist in the development and implementation of specifications and procedures related to the handling of department business to facilitate lower costs in the creation and maintenance of drawings and documentation. * Coordinate with Project Managers, purchasing agents, inspectors, engineering contractors, and construction contractors relating to design drawing content, materials and construction issues. * Coordinate with Project Managers on design and project logistical issues to assure effective, linear progress of the project. * Assist in the drafting associated with daily operation of the system. * Provide guidance so to enhance the ability of others to obtain required information through the use of departmentally developed tools and methods. * Assist in the development and implementation of techniques for more efficient utilization of CADD and recommending and specifying appropriate drafting software applications. * Participate in preliminary project site surveys, to identify potential constraints and any existing system points of connection. * Facilitate and maintain records regarding technical communications among stakeholders, including Project Management, Operations, Company Technical Service Departments, and Third Parties. * Assist in the development and implementation of Company standards, specifications and procedures. * Must be willing and able to travel by air and/or automobile to facility sites as required. The successful candidate will meet the following qualifications: * High School diploma or equivalency with some college or technical school training required. * Prefer two-year college drafting degree or technical schooling with emphasis on CADD design. * Minimum five years pertinent design experience and 2 years Project Coordination experience. * Prefer strong plant and / or pipeline related design experience. * Relevant level of CADD experience, with recent AutoCAD experience required.

Specific Responsibilities The Automation Technician Sr is a technical position under the direction and training of the automation foreman and is responsible for system integration, operation, and maintenance of all areas of automation systems and performs other related duties. The Automation Technician Sr uses extensive knowledge of DC Electronics with a basic knowledge of AC electrical systems associated with oil and gas production facilities. They also provide training and support to other technicians or operators. * Monitor and troubleshoot SCADA systems and controls. * Coordinate with contractors for the maintenance of VRU's, combustors and flare systems. * Troubleshoot and maintain existing emissions control systems, while also overseeing the installation and implementation of new emissions control systems. * Maintains good working relationships with various groups including production, water groups, and facilities engineering. * Oversee routine maintenance and troubleshooting on control systems to ensure reliable and efficient operations. * Oversee installation and configuration of control systems, including programmable logic controllers (PLCs), remote terminal unit (RTU), and human-machine interfaces (HMIs). * Assist in the testing and commissioning of new control systems. Read and interpret technical documentation including electrical and pneumatic schematics, control narratives and loop drawings. * Ensure collaboration with other automation team members and cross-function teams to resolve technical issues. * Be willing to continually improve professional development including non-technical subjects such as, but not limited to, business communications, problem solving, corporate culture. Qualifications & Experience The successful candidate will have the following qualifications and experience: * High School Diploma required. * 10+ years of experience in automation * 5+ years' experience in Oil and Gas * Must have experience with ROCLink, IDEC, ABB, SCADAPak, RMC, and SignalFire wireless. * HMI experience required with IDEC, Red Lion, and Beijer. * Field communications experience with Cambium, Cradle Point and advanced skill in TCP/IP and MODBUS communications. * Must be highly organized and able to self-direct, multi-task and prioritize based on dynamic work environment requirements. * Strong application skills in Excel and Word required. * Elevated level of communication skills in both written and spoken format. Competencies The successful candidate should demonstrate and exhibit the following core competencies: * Communication: Writes, speaks, and presents information effectively and persuasively across communication setting; * Results: Pursues work with energy, drive, and results orientation to positively impact Apache's business success; * Collaboration: Works in partnership with others and encourages different perspectives, while building and maintaining trust; and * Culture: Willingness and ability to align one's behavior with the needs, priorities, and goals of Apache. Company Overview Our primary product is energy, and where there is affordable, abundant energy, people are healthier, have access to better education, and are given greater opportunities to elevate their families to higher standards of living. Nearly 3 billion people - roughly one-third of the global population - live without electricity or without clean cooking facilities. We are committed to providing energy in innovative and more sustainable ways to help raise the standard of living for those living in energy poverty and to meet the ongoing demands of people and economies around the world. The products we deliver power increasingly cleaner electricity across the globe, fuel tractors and trucks, make fertilizer to keep the world's food supply on the table, and heat our schools, hospitals and businesses. Our employees bring a wide range of talents and skills to the job every day to tackle complex business challenges. We believe in providing a truly rewarding work environment supported by a benefits platform that ranks among the best in our peer group. Our company offers career development opportunities where employees can grow personally and professionally. We promote employee benefits that cultivate a family-friendly work environment and focus on our employees' overall well-being. We are committed to being a workplace where all employees are valued and can thrive with a sense of belonging. Our commitment to non-discriminatory, equal employment opportunities benefits our individual employees, our company and our external stakeholders; we are better as an organization when various experiences, ideas, and perspectives are brought to the table. Apache Corporation is a wholly owned subsidiary of APA Corporation (NASDAQ:APA). Apache has operations in the United States, Egypt's Western Desert and the United Kingdom's North Sea and a sister company with exploration opportunities offshore Suriname. Whether supporting Apache, APA Corporation or one of its subsidiaries, team members are employed by Apache Corporation. For additional information about APA Corporation, please visit: Portfolio Sustainability Investors *************** Apache Statement on Hiring To provide genuine equal opportunity to all people, it is the policy of Apache Corporation and its subsidiaries to base all employment-related decisions and actions exclusively on employment-related criteria. To provide genuine equal opportunity to all people, it is the policy of Apache Corporation and its subsidiaries to provide broad dissemination of job opportunities, as consistent with the nature of the positions. To provide genuine equal opportunity to all people, it is the policy of Apache Corporation and its subsidiaries to review its employment-related policies and actions on a regular basis to ensure that their application is consistent with their intent. Equal Employment Opportunity

**Stabil Drill, A Superior Energy Services Company,** is a global company that provides tough, durable tools to support the energy industry in some of the most demanding drilling applications. We have the most talented team of knowledgeable people who work together to deliver on our promise of integrity, strength and innovation. **Stabil Drill** is currently seeking Full-Time **Machinists, CNC or Manual (Day and Night Shifts)** to join our team in **Midland, TX.** **ESSENTIAL DUTIES & RESPONSIBILITIES:** + Operate machines (Manual/CNC Lathe). + Experience cutting rotary shouldered connections preferred. + Ensures machines are in working order and properly maintained. + Perform minor repairs on equipment. + Follow established safety policies and procedures. + On a rotation basis, will be required to be on call when scheduled. + Ensure full awareness of, and compliance with, the requirements of all relevant company/customer QHSE handbooks, QHSE procedures and emergency procedures. + Perform any other delegated duties considered appropriate in order to maintain the efficient running of the department. **EDUCATION/EXPERIENCE:** + Minimum of two to five years' experience in a related field preferred. + High school diploma or equivalent general education degree (GED) preferred. + Equivalent combination of experience and/or training. **Outstanding Benefits:** + Medical, Dental, and Vision + Matching 401(k) Plan + Personal Time Off (PTO) + 100% Company paid Short-term Disability, Long-term Disability, Employee Assistance Plan (EAP), and Basic Life Insurance. Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights (**************************** notice from the Department of Labor.

The AL Field Specialist is responsible for maintaining safe, efficient, and reliable PSD to Customers. The AL Field Specialist identifies opportunities to improve service delivery, implements standard work, and manage, risk during service delivery. + Ensure job deliverables are accurate and delivered on time. + Responsible for service delivery execution. + Participate in job risk analysis and continual improvement programs. + Develop customer contacts to promote company products and services. + Ensure company and regulatory standard compliance by implementing the CAT, self-assessments, and wellsite inspections. + Participate in Service Quality Meetings with customers and improve performance using action plans. + Participate in HSE and Quality initiatives. + Wear PPE and observe HSE policies. + Maintain the required safety training. + High school degree + Preferred prior experience in O&G Industry with knowledge in Artifical Lift /ESP Operations

Tap into the professional possibilities of the largest publicly traded energy partnership that features one of the most diversified cash flow streams in the midstream segment of the energy industry. With dynamic career opportunities and a creative and supportive environment, our unique midstream energy organization offers the chance to share and be recognized for your ideas. Join our team and increase your opportunities for success. The Senior Training Specialist will provide Operator Qualification support of DOT Operations/ Maintenance personnel and is responsible for providing required training to corporate personnel. Responsibilities include, but are not limited to: * Maintain the DOT Operator Qualification program for Enterprise employees. * Conduct company and contractor OQ assessments, as needed, to assure employees are properly qualified and meet PHMSA and Enterprise DOT qualification requirements. * Participate in state and federal audits of the company DOT Operator Qualification program. * Update the Enterprise DOT Operator Qualification manual as needed. * Determine the initial training requirements for each employee and contractor personnel and ensure that all training is completed satisfactorily in pursuit of new employee development. * Develop and deliver training to support needs analysis. * Maintain all training documentation, including initial and refresher training records, outlines of training courses, training schedules, etc. * Participate as needed, in assimilating new assets into Corporate Training systems. * Coordinate and cultivate inter-department support/ interaction as needed. * Promote and champion corporate training systems and services. The successful candidate will meet the following qualifications: * A Bachelor's degree in Safety or Training is preferred. * Completion of Safety or Training continuing education courses is preferred. * A minimum of 3 years of training, safety, or operations experience involving DOT pipeline assets is preferred. * Knowledge of DOT Operator Qualification Rule and its application to the pipeline industry. * Background in Pipeline Operations or Maintenance is preferred. * Experience developing technical documentation and/or training materials related to Operations and Maintenance is preferred. * Demonstrated experience coordinating and communicating information across company and department lines. * Ability to organize and prioritize daily work, focus on details, follow policies/procedures and maintain confidentiality. * Strong technical writing skills. * Experienced in the use of Learning Management Systems, databases, and other computer software systems. * Knowledge of ISNetworld is preferred. * Able to travel up to 25% domestically is required. #IND123 #LI-RW1

Disclaimer: SLB completed the acquisition of ChampionX on July 16, 2025. If selected for this position, your employment will begin with ChampionX and will transition to SLB as part of the planned integration. We are looking for a Sales Engineer II located in Midland, TX. This is your opportunity to join a global technology company, driving energy innovation for a balanced planet What's in it For You: * You will join a growing company offering competitive pay and benefits * Access to best-in-class resources, tools, and technology * Opportunity for a long term, advanced career path * A culture that values safety first, including training and personal protection What You Will Do: * Work under general supervision to provide technical sales support assuring successful customer integration and implementation of established organization products including Electric Submersible Pump (ESP) design, pricing, dismantle, and troubleshooting. Minimum Qualifications: * Bachelor's Degree in Engineering or equivalent experience * 3 years of experience in oilfield services industry * Experience in developing new business and growing existing accounts * Basic knowledge of Electric Submersible Pumps (ESPs) * Ability to develop and execute strategies and initiatives * Excellent oral and written communication skills * Excellent organization and time management skills * Interact politely and professionally with customers and coworkers * Interact politely and professionally with customers and/or coworkers * Develop strong relationships with key stakeholders in new customers * Demonstrate versatility by calling on all levels of the customer organization * Follow all safety policies and company-wide safety requirements; encourage action assuring safe behavior; confront unsafe behavior and conditions proactively and positively * Work in excess of 8 hours per day and 40 hours per week, as required to meet business needs * Work under general supervision * Computer skills including Microsoft Office Suite * Determine the priorities, goals, and objectives of work assigned * Immigration sponsorship not offered for this role Physical Demands: * Role is deemed safety-sensitive and may be subject to employer or customer drug testing. * The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. * Exerting up to 10 pounds of force occasionally and/or a negligible amount of force frequently or constantly to lift, carry, push, pull, or otherwise move objects, including the human body. Sedentary work involves sitting most of the time. * Talking: Expressing or exchanging ideas by means of the spoken word. Those activities in which they must convey detailed or important spoken instructions to customer or other workers accurately, loudly, or quickly. * Hearing: Perceiving the nature of sounds at normal speaking levels with or without correction. Ability to receive detailed information through oral communication, and to make the discriminations in sound. * Repetitive motion: Substantial movement (motions) of the wrists, hands, and/or fingers to use a computer. * Sitting: May sit for extended periods of time. * Moving around the Office: Moving between desk and file cabinets and/or office equipment. * The employee is required to have close visual acuity to perform an activity such as: preparing and analyzing data and figures; transcribing; viewing a computer terminal; expansive reading. * The employee is required to have visual acuity to operate motor vehicles. * The employee is required to have visual acuity to determine the accuracy, neatness, thoroughness of work assigned or to make general observations of facilities or structures. About Us: ChampionX is now part of SLB, a global technology company driving energy innovation for a balanced planet. As innovators, that's been our mission for nearly a century. We are a technology company that unlocks access to energy for the benefit of all. As innovators, that's been our mission for nearly a century. Today, we face a global imperative to create a future with more energy, but less carbon. Our diverse, innovative change makers are focused on going further in innovation and inventing the new energy technologies we need to get there. For more news and information, visit SLB.com Follow us on Facebook at @WeAreSLBGlobal, LinkedIn: SLBGlobal, or Instagram at @SLBGlobal. Our Commitment to Diversity and Inclusion We believe the best teams are diverse and inclusive, and we are on a journey to create a workplace where every employee can grow and achieve their best. We are committed to fair and equal treatment of employees and applicants. We recruit, hire, promote, transfer and provide opportunities for advancement on the basis of individual qualifications and job performance. In all matters affecting employment, compensation, benefits, working conditions, and opportunities for advancement, we will not discriminate against any employee or applicant for employment because of race, religion, color, creed, national origin, citizenship status, sex, sexual orientation, gender identity and expressions, genetic information, marital status, age, disability, or status as a covered veteran. In addition, we are committed to furthering the principles of Equal Employment Opportunity (EEO) through Affirmative Action (AA). Our goal is to fully utilize minority, female, disabled and covered veteran individuals at all levels of the workforce. We will consider for employment all qualified applicants, including those with criminal histories, in a manner consistent with the requirements of applicable state and local laws, including the City of Los Angeles' Fair Chance Initiative for Hiring Ordinance and the San Francisco Fair Chance Ordinance.

We are looking for the right people - people who want to innovate, achieve, grow and lead. We attract and retain the best talent by investing in our employees and empowering them to develop themselves and their careers. Experience the challenges, rewards and opportunity of working for one of the world's largest providers of products and services to the global energy industry. Job Duties * Manages all facets of a field laboratory operation to include employee development, staffing decisions, workload volume, technical projects, HSE policy, and department costs. * Uses knowledge of testing and procedural standards to ensure laboratory compliance with industry testing protocol, company best practices, and audit requirements. * Interfaces with PSLs and customers to troubleshoot complex technical issues and maintains a high level of service quality in the laboratory to support local field operations. Qualifications * Competence in multiple PSLs is often required, and management of one or more laboratories may be necessary depending upon the scope of a district. * Completion of an undergraduate degree in the sciences is typical, as well as five years of laboratory experience. Halliburton is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, disability, genetic information, pregnancy, citizenship, marital status, sex/gender, sexual preference/ orientation, gender identity, age, veteran status, national origin, or any other status protected by law or regulation. Location 6155 W Murphy, Odessa, Texas, 79763, United States Job Details Requisition Number: 205451 Experience Level: Experienced Hire Job Family: Support Services Product Service Line: Cementing Full Time / Part Time: Full Time Additional Locations for this position: Compensation Information Compensation is competitive and commensurate with experience.

**About us** At ExxonMobil, our vision is to lead in energy innovations that advance modern living and a net-zero future. As one of the world's largest publicly traded energy and chemical companies, we are powered by a unique and diverse workforce fueled by the pride in what we do and what we stand for. The success of our Upstream, Product Solutions and Low Carbon Solutions businesses is the result of the talent, curiosity and drive of our people. They bring solutions every day to optimize our strategy in energy, chemicals, lubricants and lower-emissions technologies. We invite you to bring your ideas to ExxonMobil to help create sustainable solutions that improve quality of life and meet society's evolving needs. Learn more about our **What** and our **Why** and how we can work **together** . **What role you will play in our team** We are seeking talented project professionals with diverse backgrounds and experience levels in project management to join ExxonMobil Global Projects. Bring your expertise and leadership potential to help shape world-class projects and become a trusted subject matter expert within our global team. Carlsbad, New Mexico Midland, Texas Williston, North Dakota **What you will do** ExxonMobil Global Projects is hiring talented Construction Engineers and Project Engineers to help deliver world-class projects in our unconventional portfolio. We're looking for experienced professionals who bring technical expertise, strategic thinking, and a passion for excellence, field leadership, and safety in project execution. If you've honed your skills in project management and project execution, now is the time to join a team that transforms ideas into reality. **About You** **Skills and Qualifications** + Engineering degree required + Demonstrated technical and/or leadership capability + Strong communication (verbal and written) and collaboration skills + Ability to analyze and discuss complex concepts effectively + Ability to work autonomously and contribute to success of a team **Preferred Qualifications / Experience** + 5-15 years of experience + Oil & Gas experience + Leadership experience + Project Management (construction and project engineering) + Military experience **Your benefits** **An ExxonMobil career is one designed to last. Our commitment to you runs deep: our employees grow personally and professionally, with benefits built on our core categories of health, security, finance, and life.** We offer you: + Pension Plan: Enrollment is automatic and at no cost to you. The basic benefit is a monthly annuity to be paid to you in retirement for the rest of your life. + Savings Plan: You can contribute between 6% and 20% of your pay and are encouraged to enroll right away. If you contribute at least 6% to your savings plan, the Company will contribute a 7% match. + Workplace Flexibility: We have several programs such as "Flex your Day", providing ad-hoc flexibility around when and where you work, as well as longer-term programs such as leaves of absence and part-time work. + Comprehensive medical, dental, and vision plans. + Culture of Health: Programs and resources to support your wellbeing. + Employee Health Advisory Program: Provides confidential professional counseling for you and your family, including tools and resources promoting mental health and resiliency at no additional cost to you. + Disability Plan: Income replacement for when you cannot work due to illness or injury occurring on or off the job. Enrollment is automatic and at no cost to you. More information on our Company's benefits can be found at ************************ . Please note benefits may be changed from time to time without notice, subject to applicable law. **Stay connected with us** Learn more at our website (********************************** Follow us on LinkedIN and Instagram Like us on Facebook (************************************* Subscribe our channel at YouTube **EEO Statement** ExxonMobil is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, sexual orientation, gender identity, national origin, citizenship status, protected veteran status, genetic information, or physical or mental disability. Nothing herein is intended to override the corporate separateness of local entities. Working relationships discussed herein do not necessarily represent a reporting connection, but may reflect a functional guidance, stewardship, or service relationship. Exxon Mobil Corporation has numerous affiliates, many with names that include ExxonMobil, Exxon, Esso and Mobil. For convenience and simplicity, those terms and terms like corporation, company, our, we and its are sometimes used as abbreviated references to specific affiliates or affiliate groups. Abbreviated references describing global or regional operational organizations and global or regional business lines are also sometimes used for convenience and simplicity. Similarly, ExxonMobil has business relationships with thousands of customers, suppliers, governments, and others. For convenience and simplicity, words like venture, joint venture, partnership, co-venturer, and partner are used to indicate business relationships involving common activities and interests, and those words may not indicate precise legal relationships. **Job ID - 82708**

Specific Responsibilities [Title of Role] for Apache Corporation will be a member of Apache's [Position Family] at the company's [Location] office reporting to the [Title of Hiring Manager]. This role will be primarily responsible for the following: * Bullet1; * Bullet2; * Bullet3; * Bullet4; and * Bullet5. Qualifications & Experience The successful candidate will have the following qualifications and experience: Competencies The successful candidate should demonstrate and exhibit the following core competencies: * Communication: Writes, speaks, and presents information effectively and persuasively across communication setting; * Results: Pursues work with energy, drive, and results orientation to positively impact Apache's business success; * Collaboration: Works in partnership with others and encourages different perspectives, while building and maintaining trust; and * Culture: Willingness and ability to align one's behavior with the needs, priorities, and goals of Apache. Company Overview Our primary product is energy, and where there is affordable, abundant energy, people are healthier, have access to better education, and are given greater opportunities to elevate their families to higher standards of living. Nearly 3 billion people - roughly one-third of the global population - live without electricity or without clean cooking facilities. We are committed to providing energy in innovative and more sustainable ways to help raise the standard of living for those living in energy poverty and to meet the ongoing demands of people and economies around the world. The products we deliver power increasingly cleaner electricity across the globe, fuel tractors and trucks, make fertilizer to keep the world's food supply on the table, and heat our schools, hospitals and businesses. Our employees bring a wide range of talents and skills to the job every day to tackle complex business challenges. We believe in providing a truly rewarding work environment supported by a benefits platform that ranks among the best in our peer group. Our company offers career development opportunities where employees can grow personally and professionally. We promote employee benefits that cultivate a family-friendly work environment and focus on our employees' overall well-being. We are committed to being a workplace where all employees are valued and can thrive with a sense of belonging. Our commitment to non-discriminatory, equal employment opportunities benefits our individual employees, our company and our external stakeholders; we are better as an organization when various experiences, ideas, and perspectives are brought to the table. Apache Corporation is a wholly owned subsidiary of APA Corporation (NASDAQ:APA). Apache has operations in the United States, Egypt's Western Desert and the United Kingdom's North Sea and a sister company with exploration opportunities offshore Suriname. Whether supporting Apache, APA Corporation or one of its subsidiaries, team members are employed by Apache Corporation. For additional information about APA Corporation, please visit: Portfolio Sustainability Investors *************** Apache Statement on Hiring To provide genuine equal opportunity to all people, it is the policy of Apache Corporation and its subsidiaries to base all employment-related decisions and actions exclusively on employment-related criteria. To provide genuine equal opportunity to all people, it is the policy of Apache Corporation and its subsidiaries to provide broad dissemination of job opportunities, as consistent with the nature of the positions. To provide genuine equal opportunity to all people, it is the policy of Apache Corporation and its subsidiaries to review its employment-related policies and actions on a regular basis to ensure that their application is consistent with their intent. Equal Employment Opportunity

**About us** At ExxonMobil, our vision is to lead in energy innovations that advance modern living and a net-zero future. As one of the world's largest publicly traded energy and chemical companies, we are powered by a unique and diverse workforce fueled by the pride in what we do and what we stand for. The success of our Upstream, Product Solutions and Low Carbon Solutions businesses is the result of the talent, curiosity and drive of our people. They bring solutions every day to optimize our strategy in energy, chemicals, lubricants and lower-emissions technologies. We invite you to bring your ideas to ExxonMobil to help create sustainable solutions that improve quality of life and meet society's evolving needs. Learn more about our What and our Why (***************************************************** and how we can work **together** . **About the Permian** Straddling West Texas and Southeastern New Mexico, the Permian is the most prolific oil and gas basin in America and the engine behind the country's energy renaissance. Nationally, it provides about 40% of oil and 15% of gas production and plays a critical role in making the U.S. a leading energy exporter. The merger of ExxonMobil and Pioneer creates an Unconventional business with the largest, high-return development potential in the Permian Basin. The combined company's more than 1.4 million net acres in the Delaware and Midland basins have an estimated 16 billion barrels of oil equivalent resource. In 2023, we produced, on average 612,000 barrels a day in the Permian Basin, and we're aiming to produce 1 million barrels per day from our Permian assets by the end of 2027. Investments in infrastructure from New Mexico to the Gulf Coast enhance logistics and integrated value. We've advanced gathering and processing facilities, including the Cowboy central delivery point. Integration maximizes resource development through to fuels, lubes, and chemicals. The Permian Basin business unit also has the distinction of being the first at ExxonMobil to unveil and execute a plan for net zero Scope 1 and 2 greenhouse gas emissions in operated assets by 2030, as part of the Corporation's broader 2050 net zero ambition. Over 1800 employees work and live in Midland, Odessa, Carlsbad, and the surrounding areas, all of which offer easy access to national parks and unrivaled outdoor recreational opportunities. Employees in the area also get to enjoy the world-renowned Albuquerque International Balloon Fiesta, which ExxonMobil has proudly sponsored since 2019. As a major operator in the Permian Basin, ExxonMobil invests heavily in local community development through the Permian Strategic Partnership, an industry consortium that works to enhance quality of life by improving infrastructure, healthcare, housing, education and workforce development. **What role you will play in our team** + We are looking for an experienced Automation Engineer to join the Permian Basin engineering organization. + The position will be situated in Midland, TX. + The role will have opportunities to work in the Automation, Instrumentation, Controls, and Electrical disciplines by supporting Permian Basin field operation teams directly, and through multi-discipline projects. **What you will do** + Focus on continuous improvement of the operating assets through PLC automation improvement and new technology opportunities. + Develop and execute brownfield improvement projects and initiatives with an IC&E, and Automation majority scope, from concept select through sustainment + Oversee the installation and setup of IC&E equipment and systems, ensuring they function correctly and meet safety and regulatory standards. + Participates in area Risk Assessment, HAZOP's, Hazard Hunts, Critical Operating Parameter Reviews. + Participate in incident investigations. + Support Opportunity management-identification of opportunities and development of scope of work for projects. + Ensure that instrumentation, electrical and control systems adhere to safety and environmental regulations. + Collect and analyze data from instrumentation, medium/low voltage electrical and control systems to optimize processes and identify areas for improvement and optimization. + Recommend and implement upgrades to instrumentation, electrical and/or control systems to keep them up to date with industry standards and technology. + SHE (Safety, Health, and Environment): Implementing and enforcing safety protocols and procedures to protect personnel, equipment, and the environment. + Provide operations support for changes, repairs & alterations of all plant pressure equipment leveraging off Management of Change process. + Work with multidisciplinary teams, including facilities engineers, machinery engineers, operations and maintenance personnel, to achieve project objectives. + Provide shutdown engineering support. + Provide brownfield upgrade/greenfield projects engineering support. Preparation / review of IC&E engineering deliverables (one-line diagrams, Cause & Effect diagrams, Controls Narrative, wiring diagrams, installation details, instrument index, cable schedule, etc) performed both internally and by Contractors and sub-contractors to ensure that work is being executed in accordance with Company specifications, company standards, and regulatory requirements. **About You** + B.S. in Electrical Engineering or a related field with significant automation, instrumentation, controls, and electrical experience + Strong knowledge of discipline design standards, specifications, codes, and appropriate safety criteria (ISA, NEC, IEEE Standards, etc.) + Strong analytic and communication skills + Management of third-party engineering firms + Vendor technical qualification support activities + Ability to troubleshoot, diagnose and rectify instrumentation, medium/low voltage electrical equipment and control systems related issues. + Demonstrated work experience in Upstream Oil & Gas Production support + Significant experience in providing process improvements through automation applications and hardware (PLC's, HMI's, SCADA, DCS, etc) **Preferred Knowledge/Skills/ Experience** + Leadership roles in operational or technical organizations with focus on Automation, Instrumentation and Control design, projects, or reliability + Programmable Logic Controller debugging and programming leveraging advanced features. + Networking/field communications: DNP3, Ethernet/IP, Modbus TCP/IP, Modbus RTU/RS-485/RS-232. MQTT, Radio and fiber optic communications, managed network switches, etc + Instrumentation and Electrical facility design, and best practices development. + Familiar with analytics and visualization software applications such as Ignition, SEEQ and Power BI, including development of dashboards for operations troubleshooting and support **Your benefits** **An ExxonMobil career is one designed to last. Our commitment to you runs deep: our employees grow personally and professionally, with benefits built on our core categories of health, security, finance, and life.** **We offer you:** + **Pension Plan** : Enrollment is automatic and at no cost to you. The basic benefit is a monthly annuity to be paid to you in retirement for the rest of your life. + **Savings Plan** : You can contribute between 6% and 20% of your pay and are encouraged to enroll right away. If you contribute at least 6% to your savings plan, the Company will contribute a 7% match + **Comprehensive medical, dental, and vision plans** . + **Culture of Health** : Programs and resources to support your wellbeing. + **Employee Health Advisory Program** : Provides confidential professional counseling for you and your family, including tools and resources promoting mental health and resiliency at no additional cost to you. + **Disability Plan** : Income replacement for when you cannot work due to illness or injury occurring on or off the job. Enrollment is automatic and at no cost to you. More information on our Company's benefits can be found at ************************ (http://************************.) Please note benefits may be changed from time to time without notice, subject to applicable law. **Stay connected with us** Learn more at our website (*************************************************************************************************************** Follow us on LinkedIN (******************************************************* and **Instagram (**************************************** Like us on Facebook (************************************* Subscribe our channel at YouTube (**************************************** **Employer equal opportunity** **ExxonMobil is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, sexual orientation, gender identity, national origin, citizenship status, protected veteran status, genetic information, or physical or mental disability.** Nothing herein is intended to override the corporate separateness of local entities. Working relationships discussed herein do not necessarily represent a reporting connection, but may reflect a functional guidance, stewardship, or service relationship. Exxon Mobil Corporation has numerous affiliates, many with names that include ExxonMobil, Exxon, Esso and Mobil. For convenience and simplicity, those terms and terms like corporation, company, our, we and its are sometimes used as abbreviated references to specific affiliates or affiliate groups. Abbreviated references describing global or regional operational organizations and global or regional business lines are also sometimes used for convenience and simplicity. Similarly, ExxonMobil has business relationships with thousands of customers, suppliers, governments, and others. For convenience and simplicity, words like venture, joint venture, partnership, co-venturer, and partner are used to indicate business relationships involving common activities and interests, and those words may not indicate precise legal relationships. **Job Id:** **82467**

Specific Responsibilities A Production Engineer Sr - Artificial Lift is a member of the production engineering team that should expect to spend 3-4 days in the field each week. This role reports to the asset production engineering manager. They work closely with cross-functional teams to optimize production, reduce costs, and implement artificial lift strategies. Duties will include analyzing production data, identifying areas for improvement, implementing process enhancements, troubleshooting equipment issues, and collaborating closely with Production Operations. They also provide technical support and guidance to junior engineers and production staff. Strong technical knowledge, communication, problem-solving skills, and the ability to work in a fast-paced, deadline-driven environment are essential for success in this role. * Partner with Production Operations, Reservoir Engineering, and Facilities Engineering to deliver safe, reliable, and cost-efficient repairs and proactive optimization projects. * Provide technical support for artificial lift systems (PAGL, gas lift, ESPs, and rod pumps), including selection, installation, and ongoing optimization. * Spend significant time in the field, up to 50% of work week, working directly at the wellhead with operations personnel and vendors to ensure safe and efficient execution. * Drive artificial lift optimization by implementing best practices, improving equipment reliability, and reducing operating costs. * Develop and deliver training programs for field staff to enhance artificial lift uptime and operational knowledge. * Design and implement solutions to mitigate integrity issues, balancing risk, cost, and long-term reliability. * Identify, design, and evaluate cost-reduction, debottlenecking, and reliability projects that enhance asset performance. * Collaborate with vendors to improve artificial lift design, enhance service quality, and ensure adoption of industry best practices in field operations. * Conduct basic economic assessments, support cost management efforts, and contribute to well and lease-level financial reviews to ensure economic viability. * Lead and document root cause analyses for artificial lift failures, and develop mitigation plans to prevent recurrence. * Partner with Production Operations, Reservoir Engineering, and Facilities Engineering to deliver safe, reliable, and cost-efficient repairs and proactive optimization projects. * Provide technical support for artificial lift systems (PAGL, gas lift, ESPs, and rod pumps), including selection, installation, and ongoing optimization. * Spend significant time in the field, up to 50% of work week, working directly at the wellhead with operations personnel and vendors to ensure safe and efficient execution. * Drive artificial lift optimization by implementing best practices, improving equipment reliability, and reducing operating costs. * Develop and deliver training programs for field staff to enhance artificial lift uptime and operational knowledge. * Design and implement solutions to mitigate integrity issues, balancing risk, cost, and long-term reliability. * Identify, design, and evaluate cost-reduction, debottlenecking, and reliability projects that enhance asset performance. * Collaborate with vendors to improve artificial lift design, enhance service quality, and ensure adoption of industry best practices in field operations. * Conduct basic economic assessments, support cost management efforts, and contribute to well and lease-level financial reviews to ensure economic viability. * Lead and document root cause analyses for artificial lift failures, and develop mitigation plans to prevent recurrence. * Work closely with asset teams to deliver production and P&L objectives, including regular updates and KPI tracking. Skills * Act as the primary liaison between Production Engineering, Houston technical teams, and Permian Production Operations, ensuring clear two-way communication. Provide field-based insights and feedback to educate Houston engineers on operational challenges, while also translating technical guidance into practical application for field teams. * Identify and progress production uplift opportunities such as artificial lift optimizations, recompletions, stimulations, water shut-offs, and well cleanouts. * Provide production engineering support to development projects, including nodal analysis, infrastructure planning, and field development design. * Leverage automation technologies and drive (deployment of) digital transformation (e.g., Edge devices, SCADA, and custom scripting) to integrate artificial lift and facilities operations, improve equipment reliability, reduce downtime, and enable data-driven optimization across multiple lift types. * Must be proficient in all Microsoft applications and other E&P computer applications (i.e: Wellview, Cygnet, Spotfire, OFM, Foresite, Wellflo, Prosper, Rodstar, etc). * Understanding of automation technologies (e.g., Edge devices, SCADA, and custom scripting) * High level of production engineering expertise with experience in all types of operations related to the full life cycle of oil & gas producer wells, including: * Completions, recompletions, and workovers. * Artificial lift design, installation, and troubleshooting. * Nodal analysis (Inflow/Outflow performance). * Facilities upgrades/modification and production takeaway limitations. * Proven track record of financial performance and responsibility with experience in budget and schedule planning, AFE preparation and economic evaluation. * Experience implementing sound decisions when faced with multi-faceted problems. * Demonstrated ability to communicate technical vision, contribute to team goals, and mentor engineering talent. * Self-motivated, organized, and disciplined in time management. * Positive attitude with a strong desire to learn, adapt quickly, and contribute meaningfully. * Not afraid to ask questions and seek clarification to accelerate growth and impact. Qualifications & Experience The successful candidate will have the following qualifications and experience: * Bachelor of Science in Engineering required, from a competitive four-year college or university, with strong academic credentials. * 6+ years of experience working for energy companies, in production engineering and production operations. Experience in the Permian Basin is preferred Competencies The successful candidate should demonstrate and exhibit the following core competencies: * Communication: Writes, speaks, and presents information effectively and persuasively across communication setting; * Results: Pursues work with energy, drive, and results orientation to positively impact Apache's business success; * Collaboration: Works in partnership with others and encourages different perspectives, while building and maintaining trust; and * Culture: Willingness and ability to align one's behavior with the needs, priorities, and goals of Apache. Company Overview Our primary product is energy, and where there is affordable, abundant energy, people are healthier, have access to better education, and are given greater opportunities to elevate their families to higher standards of living. Nearly 3 billion people - roughly one-third of the global population - live without electricity or without clean cooking facilities. We are committed to providing energy in innovative and more sustainable ways to help raise the standard of living for those living in energy poverty and to meet the ongoing demands of people and economies around the world. The products we deliver power increasingly cleaner electricity across the globe, fuel tractors and trucks, make fertilizer to keep the world's food supply on the table, and heat our schools, hospitals and businesses. Our employees bring a wide range of talents and skills to the job every day to tackle complex business challenges. We believe in providing a truly rewarding work environment supported by a benefits platform that ranks among the best in our peer group. Our company offers career development opportunities where employees can grow personally and professionally. We promote employee benefits that cultivate a family-friendly work environment and focus on our employees' overall well-being. We are committed to being a workplace where all employees are valued and can thrive with a sense of belonging. Our commitment to non-discriminatory, equal employment opportunities benefits our individual employees, our company and our external stakeholders; we are better as an organization when various experiences, ideas, and perspectives are brought to the table. Apache Corporation is a wholly owned subsidiary of APA Corporation (NASDAQ:APA). Apache has operations in the United States, Egypt's Western Desert and the United Kingdom's North Sea and a sister company with exploration opportunities offshore Suriname. Whether supporting Apache, APA Corporation or one of its subsidiaries, team members are employed by Apache Corporation. For additional information about APA Corporation, please visit: Portfolio Sustainability Investors *************** Apache Statement on Hiring To provide genuine equal opportunity to all people, it is the policy of Apache Corporation and its subsidiaries to base all employment-related decisions and actions exclusively on employment-related criteria. To provide genuine equal opportunity to all people, it is the policy of Apache Corporation and its subsidiaries to provide broad dissemination of job opportunities, as consistent with the nature of the positions. To provide genuine equal opportunity to all people, it is the policy of Apache Corporation and its subsidiaries to review its employment-related policies and actions on a regular basis to ensure that their application is consistent with their intent. Equal Employment Opportunity

Your Job The jobsite located in Stanton, TX has an opening for a Tool Room Attendant. Our Team Optimized Process Designs, LLC (OPD) is an engineering/construction company headquartered in Katy, TX with an expertise in the natural gas, natural gas liquids, and petrochemical industries. OPD is part of the larger Koch Engineered Solutions (KES) organization which provides a variety of capabilities across many industries. Originally incorporated in 1980, OPD has developed a strong reputation for honesty, integrity, and ability to successfully execute projects. OPD has a key advantage in being able to supply construction services as well as engineering/procurement. This enables clients to have a ''one stop shop'' for the overall project, providing increased efficiency and avoiding potential interface problems. OPD's industry experience, flexibility, and personal attention have made us a preferred partner to our customers and our tight knit, highly productive, team atmosphere makes OPD a great place to work. What You Will Do Some core responsibilities of a Tool Room Attendant include: * Stores, removes, loads and unloads all types of materials from storage bins, pallets and vehicles that can't be handled by material handling devices. * Operates manual or mechanical devices and stocks inventory shelves. * Reads production schedule, customer order, work order, shipping order or requisitions to determine items to be moved, gathered or distributed. * Assorts and places materials or items on racks, shelves or bins according to predetermined sequences such as size type, style, or color. * Moves materials and supplies from warehouse and prepares for delivery. * Fills requisition, work orders or request for materials, tools or stock items. * Records material items received or distributed. * May maintain inventory records. We expect all field employees to: * Actively participate in a strong safety culture * Recognize safety hazards and risks * Participate in onsite safety meetings * Follow OPD and client safety policies and procedures * Be aware of changing conditions on an active jobsite * Be on time to the jobsite each day ready for work * Display a positive attitude and be able to work in a team environment * High attention to detail to avoid reworks and errors Some physical demands of being a Tool Room Attendant include: * Capable of working in outdoor weather and environmental conditions including extreme heat and humidity, extreme cold, and high elevations. * Lifting and carrying awkward objects up to 60 lbs * Standing for extended periods of time up to 12 hours per day. * Moving the entire body. Considerable use of arms, legs, climbing, lifting, balancing, walking, stooping, crawling, twisting, reaching, and bending on a regular basis. * Must be able to work on elevated platforms and maintain balance when stepping on narrow platforms such as beams and pipes. Must be able to perform these activities while wearing an approved full-body harness and lanyard. * Use hands to handle, control, and feel objects and/or tools. Who You Are (Basic Qualifications) * 1+ years of previous experience as a Tool Room Attendant Other Job Requirements: * Must be able to read, write & communicate in English * Must be willing and able to work shifts up to 12 hours per day and 7 days per week * Must be able and willing to attend mandatory safety meetings * Must be able meet all physical requirements What Will Put You Ahead: * Previous experience working in a heavy industrial construction environment * 3+ years of previous experience as a Tool Room Attendant * Previous experience as a Helper At Koch companies, we are entrepreneurs. This means we openly challenge the status quo, find new ways to create value and get rewarded for our individual contributions. Any compensation range provided for a role is an estimate determined by available market data. The actual amount may be higher or lower than the range provided considering each candidate's knowledge, skills, abilities, and geographic location. If you have questions, please speak to your recruiter about the flexibility and detail of our compensation philosophy. Hiring Philosophy All Koch companies value diversity of thought, perspectives, aptitudes, experiences, and backgrounds. We are Military Ready and Second Chance employers. Learn more about our hiring philosophy here. Who We Are As a Koch Engineered Solutions company, Optimized Process Designs (OPD) provides clients with detailed engineering packages in all disciplines, single-point procurement for all equipment and materials, fabrication and direct-hired construction services throughout the United States. We leverage in-house capabilities and provide services with faster speed to market to help deliver increased cost savings while minimizing risk. At Koch, employees are empowered to do what they do best to make life better. Learn how our business philosophy helps employees unleash their potential while creating value for themselves and the company. Our Benefits Our goal is for each employee, and their families, to live fulfilling and healthy lives. We provide essential resources and support to build and maintain physical, financial, and emotional strength - focusing on overall wellbeing so you can focus on what matters most. Our benefits plan includes - medical, dental, vision, flexible spending and health savings accounts, life insurance, ADD, disability, retirement, paid vacation/time off, educational assistance, and may also include infertility assistance, paid parental leave and adoption assistance. Specific eligibility criteria is set by the applicable Summary Plan Description, policy or guideline and benefits may vary by geographic region. If you have questions on what benefits apply to you, please speak to your recruiter. Additionally, everyone has individual work and personal needs. We seek to enable the best work environment that helps you and the business work together to produce superior results. Equal Opportunities Equal Opportunity Employer, including disability and protected veteran status. Except where prohibited by state law, some offers of employment are conditioned upon successfully passing a drug test. This employer uses E-Verify. Please click here for additional information. (For Illinois E-Verify information click here, aquí, or tu).

Your Job The jobsite in Stanton, TX has an opening for a Rigger Our Team Optimized Process Designs, LLC (OPD) is an engineering/construction company headquartered in Katy, TX with an expertise in the natural gas, natural gas liquids, and petrochemical industries. OPD is part of the larger Koch Engineered Solutions (KES) organization which provides a variety of capabilities across many industries. Originally incorporated in 1980, OPD has developed a strong reputation for honesty, integrity, and ability to successfully execute projects. OPD has a key advantage in being able to supply construction services as well as engineering/procurement. This enables clients to have a ''one stop shop'' for the overall project, providing increased efficiency and avoiding potential interface problems. OPD's industry experience, flexibility, and personal attention have made us a preferred partner to our customers and our tight knit, highly productive, team atmosphere makes OPD a great place to work. What You Will Do Some core responsibilities for a Rigger include: * Lifting and moving heavy equipment and materials using mechanical equipment * Attaching loads using chains, slings, cables, hooks, and other related equipment * Able to manually handle and securely apply rigging equipment * Attach and detach loads effectively * Monitor and maintain all rigging equipment * Able to effectively communicate with the rigging team (other riggers and crane operator) * Must be familiar with the standard crane hand signals * Must be able to assess weights of loads and equipment needed to lift safely We expect all field employees to: * Actively participate in a strong safety culture * Recognize safety hazards and risks * Participate in onsite safety meetings * Follow OPD and client safety policies and procedures * Be aware of changing conditions on an active jobsite * Be on time to the jobsite each day ready for work * Display a positive attitude and be able to work in a team environment * Some physical demands of being a Rigger include: * Capable of working in outdoor weather and environmental conditions including extreme heat and humidity, extreme cold, and high elevations. * Lifting and carrying awkward objects up to 60 lbs * Standing for extended periods of time up to 11 hours per day. Breaks are given in 2.5 hour intervals * Moving the entire body. Considerable use of arms, legs, climbing, lifting, balancing, walking, stooping, crawling, twisting, reaching, and bending on a regular basis. * Use hands to handle, control, and feel objects and/or tools. Who You Are (Basic Qualifications) * At least 1.5 years of experience as a rigger or ironworker * NCCER Rigger Certification Level 1 * Must follow company safety procedures and industry known best work practices * Knowledgeable of crane signals (hand and verbal). * Travel is a must with extended periods away from home in remote areas at times. * Must be able to work shifts up to 12 hours per day and 7 days per week when needed by project schedule demands * Must be able to meet all physical demands of the job What Will Put You Ahead * Previous experience in a gas plant construction environment * 3+ years previous experience as an ironworker or rigger * NCCER Rigger Certification Level 2+ At Koch companies, we are entrepreneurs. This means we openly challenge the status quo, find new ways to create value and get rewarded for our individual contributions. Any compensation range provided for a role is an estimate determined by available market data. The actual amount may be higher or lower than the range provided considering each candidate's knowledge, skills, abilities, and geographic location. If you have questions, please speak to your recruiter about the flexibility and detail of our compensation philosophy. Hiring Philosophy All Koch companies value diversity of thought, perspectives, aptitudes, experiences, and backgrounds. We are Military Ready and Second Chance employers. Learn more about our hiring philosophy here. Who We Are As a Koch Engineered Solutions company, Optimized Process Designs (OPD) provides clients with detailed engineering packages in all disciplines, single-point procurement for all equipment and materials, fabrication and direct-hired construction services throughout the United States. We leverage in-house capabilities and provide services with faster speed to market to help deliver increased cost savings while minimizing risk. At Koch, employees are empowered to do what they do best to make life better. Learn how our business philosophy helps employees unleash their potential while creating value for themselves and the company. Our Benefits Our goal is for each employee, and their families, to live fulfilling and healthy lives. We provide essential resources and support to build and maintain physical, financial, and emotional strength - focusing on overall wellbeing so you can focus on what matters most. Our benefits plan includes - medical, dental, vision, flexible spending and health savings accounts, life insurance, ADD, disability, retirement, paid vacation/time off, educational assistance, and may also include infertility assistance, paid parental leave and adoption assistance. Specific eligibility criteria is set by the applicable Summary Plan Description, policy or guideline and benefits may vary by geographic region. If you have questions on what benefits apply to you, please speak to your recruiter. Additionally, everyone has individual work and personal needs. We seek to enable the best work environment that helps you and the business work together to produce superior results. Equal Opportunities Equal Opportunity Employer, including disability and protected veteran status. Except where prohibited by state law, some offers of employment are conditioned upon successfully passing a drug test. This employer uses E-Verify. Please click here for additional information. (For Illinois E-Verify information click here, aquí, or tu).

Stabil Drill, A Superior Energy Services Company, is a global company that provides tough, durable tools to support the energy industry in some of the most demanding drilling applications. We have the most talented team of knowledgeable people who work together to deliver on our promise of integrity, strength and innovation. Stabil Drill is currently seeking Full-Time Machinists, CNC or Manual (Day and Night Shifts) to join our team in Midland, TX. ESSENTIAL DUTIES & RESPONSIBILITIES: * Operate machines (Manual/CNC Lathe). * Experience cutting rotary shouldered connections preferred. * Ensures machines are in working order and properly maintained. * Perform minor repairs on equipment. * Follow established safety policies and procedures. * On a rotation basis, will be required to be on call when scheduled. * Ensure full awareness of, and compliance with, the requirements of all relevant company/customer QHSE handbooks, QHSE procedures and emergency procedures. * Perform any other delegated duties considered appropriate in order to maintain the efficient running of the department. EDUCATION/EXPERIENCE: * Minimum of two to five years' experience in a related field preferred. * High school diploma or equivalent general education degree (GED) preferred. * Equivalent combination of experience and/or training. Outstanding Benefits: * Medical, Dental, and Vision * Matching 401(k) Plan * Personal Time Off (PTO) * 100% Company paid Short-term Disability, Long-term Disability, Employee Assistance Plan (EAP), and Basic Life Insurance.