Sysco jobs in Grand Rapids, MI

- 167958 jobs

Market VP, Operations
Sysco 4.4
Sysco job in Grand Rapids, MI
This role plays a critical leadership role on the Sysco Operations Team. The Market Vice President of Operations provides leadership and direction to Sysco's broadline sites in markets and the entire organization regarding Distribution in the United States. This role is a key participant in the market-based cross functional teams. Site level Vice Presidents of Operations report to Region Presidents and have a dotted line reporting relationship to the Market Vice President of Operations. + Coordinates and collaborates with Corporate, Market, Region, and Site Leadership to establish and improve alignment with overall goals and objectives to increase operating performance; develop operations personnel to be able to successfully fill key leadership roles throughout regions and market. + Delivers exceptional Customer Service through on time delivery and post-ship service levels + Oversees market-wide Distribution Operations, continuous improvement process management, and appropriate policy development and implementation + Analyzes, identifies, and proposes action to the solution of problems with the operations and leadership teams of individuals and departments in an effort to increase the effectiveness of operations + Serves as Market spokesperson in cases of inquiry, feedback, or requests for special information in order to facilitate the accurate and precise flow of information between the field and market + Monitors individual Operational Service Levels and works with site leadership to ensure work method and system utilization and compliance + Works with site leadership to improve overall warehousing performance levels through maintenance of engineered standards and continuously working to improve minimum performance expectations + Ensures that market operations staff complies with all Sysco policies concerning safety and security of all operations related activities to reduce accidents and product loss + Creates and drives a Culture of Care and Collaboration within market and sites by fully implementing Operations Connections within each site **Responsibilities:** Market Management: + Guides planning and development of departmental market budgets and evaluates market operations in terms of fiscal management to ensure fiscal responsibility in the market's operation. + Collaborates with Market Leadership to maintain and enhance interface capabilities with other functions and departments in an effort to continually improve overall organizational efficiency as a market. + Analyzes, identifies, and proposes action to the solution of problems with the operations and leadership teams of individuals and departments in an effort to increase the effectiveness of operations. + Provides coaching and direction to the site Vice Presidents of Operations in order to achieve and maintain optimal Market efficiencies + Key participant in market cross-functional leadership team. Operations Management: + Works with site leadership to ensure execution of slotting practices and optimal slotting configurations. + Works with site leadership to ensure optimal utilization of Roadnet and ensure proper routing practices and policies are being adhered to along with ongoing route optimization. + Works with each site to ensure compliance with all current food safety policies, protocols and requirements. + Ensures compliance with all Department of Transportation rules and regulations. + Monitors the utilization of transportation services by reviewing the coordination of back-haul functions and other routing/scheduling activities in an effort to increase the profitability of all transportation services. + Works with Talent Acquisition to ensure proper staffing needs are met. Building and Equipment Maintenance Management: + Monitors market facilities to ensure proper maintenance and safety schedules are being utilized and adhered to. + Ensures that all warehouse and facility areas are maintained in a sanitary condition in an effort to ensure full compliance with food safety requirements and guidelines. + Reviews the cleanliness of fleet equipment to ensure proper sanitary conditions. Reviews and approves major expenditures to ensure adherence to market's budget. + Analyzes growth of facility size to maintain proper storage, receiving, and shipping capabilities for present and future business. This is to include office area and parking needs. + Reviews annual capital requirements. Safety and Security Management: + Monitors the maintenance of market facilities by ensuring they are kept in a condition consistent with the safety standards set by Sysco in an effort to reduce or eliminate operations related injuries and damage/loss of product and equipment. + Ensures that market operations staff complies with all Sysco policies concerning safety and security of all operations related activities in an effort to reduce accidents and product loss. + Monitors injury levels and equipment/product damage levels to ensure that market operations management staff is enforcing policies concerning warehouse safety. Talent Management: + Select, develop and retain the required operations leadership talent within the sites to meet current and future business needs. + Ensure that assigned site operations leaders successfully execute core distribution programs. + Utilizes Sysco talent management programs and tools (performance management, leadership development, engagement surveys, talent reviews) to manage and develop site operations leadership talent + Provides consistent and ongoing feedback on the performance of site operations leaders. + Demonstrates effectiveness and collaboration in leading a remote team. **Qualifications:** + Bachelor's degree in Business Management or an appropriate combination of education and management experience in distribution, supply chain and logistics. + 10+ years similar industry management and operational experience required. + Experience in both Union and Non-Union environments **Professional Skills:** + Ability to read, analyze and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public. + Ability to add, subtracts, multiply, and divides in all units of measure, using whole numbers, common fractions, and decimals. + Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. + Demonstrate knowledge of Spreadsheet software and Word Processing software, and ability to learn Sysco technology software and programs. Must have excellent computer skills. + Working knowledge of Federal Motor Carrier Safety Regulations. + Working knowledge of environmental regulations/legislation and governing bodies. + Ability to successfully engage and lead individual and team discussions and meetings. + Ability to apply all relevant policies in a consistent, timely and objective manner. + Capable of working with peers and associates from other departments, sites, Corporate and the business community in a proactive and constructive manner. + Ability to work in a disciplined manner and capable of following established procedures, practices and comply with local, state and federal regulations. + Ability to manage the pressures and stress associated with a deadline-oriented atmosphere and customer service issues. Demonstrates skill in making independent decisions in support of company policies and procedures in a timely manner. **Physical Demands:** The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. + While performing the duties of this job, the associate is regularly required to talk or hear. The associate is frequently required to stand; walk; sit; use hands to finger, handle, or feel; reach with hands and arms and climb or balance. The associate is occasionally required to stoop, kneel, crouch, or crawl. The associate must occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. **Travel Requirements:** This role is based in the market hub location along with other market leader positions. The role travels approximately 60% of time to the sites within the market. **Working Conditions:** + The above information on this description has been designed to indicate the general nature and level of work performed by associates within this classification. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities, and qualifications required of associates assigned to this job. + To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed above are representative of knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. + While performing the duties of this job, the associate is occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces. The associate works non-traditional business hours including evenings, nights, weekends, holidays and on-call. The associate may occasionally be required to travel to other sites or the corporate office as business needs dictate (i.e. training, business continuation, etc.). The associate is occasionally exposed to high, precarious places. The associate is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate. NOTICE: The above statements are intended to describe the general nature of the environment and level of work being performed by this job. This in no way states or implies that the duties and responsibilities listed are the only tasks to be performed by the associate in this job. The associate will be required to follow any other instructions and to perform any other job-related duties requested by his or her supervisor. Reasonable accommodations will be made to enable individuals with disabilities to perform the essential functions. This supersedes prior s. When duties and responsibilities change and develop, the job description will be reviewed and is subject to changes of business necessity. \#LI-JJ2 AFFIRMATIVE ACTION STATEMENT: Applicants must be currently authorized to work in the United States. We are proud to be an Equal Opportunity and Affirmative Action employer, and consider qualified applicants without regard to race, color, creed, religion, ancestry, national origin, sex, sexual orientation, gender identity, age, disability, veteran status or any other protected factor under federal, state or local law. This opportunity is available through Sysco Corporation, its subsidiaries and affiliates.
$137k-209k yearly est. 18d ago
Field Service Technician - Cedar Rapids, IA
Vertiv 4.5
Cedar Rapids, IA job
At Vertiv, we design, manufacture, and service the mission-critical infrastructure technologies for vital applications in data centers, communication networks and commercial and industrial environments. We are the trusted Service Provider for 70%+ of Fortune 500 companies, including industry-leading data centers and providers of colocation and cloud service. Why Vertiv is the best company for Field Service professionals: Vertiv is an industry leader in Technology and Services with a best-in-class Customer Service and Safety culture Company leaders have many years of hands-on Field Service experience in this industry and many others Tremendous focus is placed on employee technical and leadership development Technical Training takes place in our state of the art Training Academy or Regional Training Center with a strong focus on immersive, hands-on learning Competitive benefits include: Company vehicle, smartphone, laptop, personal protective equipment (PPE), other tools-of-the-trade, 401k, Profit Sharing, & Generous PTO/Vacation Plan, Medical, Vision & Dental & more Abundant technical resources including 24/7 Technical/Factory Support and technical online libraries of product documentation, work instructions, and self-help troubleshooting guides Company-wide commitment to promoting a strong work/life balance An employer-of-choice for Veterans with technical backgrounds The Field Service Technician is primarily responsible for scheduled and remedial (break-fix) service on Small to Medium UPS, Power Distribution Units & Battery system products (2-120KVA) serviced by Vertiv, commensurate with appropriate classroom and on-the-job training. The Field Service Technician is required to establish, promote and maintain excellent rapport with all customers, co-workers, sales representatives and others as appropriate. The Field Service Technician is primarily responsible to support products and services sold to our “Edge” market segment, including retail, financial, and municipal customers. RESPONSIBILITIES: ROLE Perform service tasks as assigned and as per company policies and procedures Capable of working under direct supervision or independently based upon training completion Render on-site and phone assistance to customers Communicate with Technical Support on technical or procedural issues Implement Field Change Notices per published guidelines Keep current on Safety Bulletins, Safety Field Change Notices, Field Change Notices, and Service Tips SAFETY Operate in a safe manner in accordance with published safety guidelines Maintain and operate company vehicle in accordance with local laws and company policy Must wear appropriate PPE as per company guidelines and accordance with job duties Adhere to work hours policy guidelines - “14 hours rule” Report all work related accidents or injuries within 24 hours to the appropriate personnel. ADMINISTRATION Complete accurate and timely administrative tasks (i.e. Time cards, expense report, mileage reports, Service Request task closure, service reports) per company guidelines Maintain individual inventory and perform cycle counts in accordance with company policy Maintain company property (company vehicle, credit cards, PPE, test equipment, laptop, etc.) per company policies CUSTOMER SATISFACTION Provide proper and adequate communication to internal and external customers Provide estimated time of arrival to the customer where applicable Complete scheduled maintenance documentation properly and provide to the customer and local office upon completion of each assignment Strive to provide all customers a “first time fix” for their equipment Maintain customer satisfaction rates per company guidelines Attend Customer Meetings as required PERFORMANCE Maximize productivity by combining service opportunities Complete all technical and administrative work in an efficient and timely manner Capable of making technical and commercial decisions under pressure Properly evaluate site and equipment for appropriate billing status Maintain productive utilization rate per company guidelines Perform inventory cycle counts per company guidelines Adhere to company dress code and safety regulations Meet or exceed on-site response time requirements for each customer Understand and comply with company startup/escalation processes and procedures Maintain proper and adequate level of internal communications QUALIFICATIONS Experience (one or more of the following) ASEET or AMEET, or progress towards, is preferred High School or Vocational School Diploma 2-4 years military experience in a related technical field 0-2 years of relevant industry experience Interpersonal and Administrative Skills Communicate professionally and respectfully in both written and verbal forms Manage time effectively by prioritizing and balancing technical tasks with administrative tasks Collaborative with peers, customers, suppliers, and leadership Complete administrative tasks (i.e. report writing, time entry, expense reporting, material debriefing, inventory counting, etc.) in a timely fashion Technical skills Make basic site evaluation skills to include: environmental temperature, and general operating conditions Familiarity with electrical / electronic test equipment and fundamentals Follow written technical documentation (i.e. procedures and product manuals) to perform service tasks Employ elementary fix/repair techniques based on directed supervision Complete service tasks and return unit to full operating conditions based upon directed supervision Summarize and report all work related tasks performed in written and verbal form Efficient with a personal computer and associated applications (Microsoft Office, Vertiv software, etc.) WORKING CONDITIONS: Travel is required Flexible schedules (weekends, evenings, and holidays) Valid driver's license Due to the safety sensitive aspect of the role, candidates are required to successfully pass a drug test prior to employment. In addition, you will also be required to complete and pass a pre-employment background check and a motor vehicle records check. PHYSICAL REQUIREMENTS: While performing duties of the above jobs, the associate is regularly required to stand, walk, use hands and fingers, handle or feel objects, tools or other components; reach with hands and arms; stoop, kneel, crouch, or crawl; talk, hear and smell. The associate frequently is required to sit and climb or balance. Specific vision abilities required by this job include close vision, distant vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. Must be able to consistently lift up to 50 pounds and occasionally up to 75 pounds. Notes: Vertiv will make reasonable accommodations whenever necessary for all qualified employees or candidates with disabilities (as defined by applicable law), provided that (1) the individual is otherwise qualified to safely perform the essential functions of the job and (2) such accommodations due not impose an undue hardship. The successful candidate will embrace Vertiv's Core Principals & Behaviors to help execute our Strategic Priorities. OUR CORE PRINCIPALS: Safety. Integrity. Respect. Teamwork. Diversity & Inclusion. OUR STRATEGIC PRIORITIES Customer Focus Operational Excellence High-Performance Culture Innovation Financial Strength OUR BEHAVIORS Own It Act With Urgency Foster a Customer-First Mindset Think Big and Execute Lead by Example Drive Continuous Improvement Learn and Seek Out Development At Vertiv, we offer the stability of a global leader in a growing industry and the opportunity of a startup. We design, manufacture and service the mission-critical infrastructure technologies for vital applications in data centers, communication networks and commercial and industrial environments. With $5 billion in sales, a strong customer base and global reach in nearly 70 countries, our move to establish a standalone business enables us to deliver greater value to our customers and create new opportunities for our people. Vertiv is an Equal Opportunity/Affirmative Action employer. We promote equal opportunities for all with respect to hiring, terms of employment, mobility, training, compensation, and occupational health, without discrimination as to age, race, color, religion, creed, sex, pregnancy status (including childbirth, breastfeeding, or related medical conditions), marital status, sexual orientation, gender identity / expression (including transgender status or sexual stereotypes), genetic information, citizenship status, national origin, protected veteran status, political affiliation, or disability. If you have a disability and are having difficulty accessing or using this website to apply for a position, you can request help by sending an email to ********************** . If you are interested in applying or learning more about this role, please visit the company's career page located on Vertiv.com/Careers Work Authorization No calls or agencies please. Vertiv will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas such as E, F-1, H-1, H-2, L, B, J, or TN or who need sponsorship for work authorization now or in the future, are not eligible for hire.
$50k-78k yearly est. Auto-Apply 4d ago
HVM, Inside Sales Engineer - Pittsburgh
Vertiv 4.5
Pittsburgh, PA job
Our Inside Sales Engineer is supporting our High Voltage Maintenance business. HVM is an electrical engineering and testing company providing comprehensive testing, maintenance, and engineering services to a variety of industries including utilities, data centers, renewable energy, commercial and industrial industries. This position will report to the Area Sales Manager for covering HVM's Ohio Valley or Northeast territory and will provide sales and technical support for all the selling resources in that area. This role will assist in generating more business by following up on leads, assisting with proposals, performing joint sales calls with the area sales manager and/or local sales engineers, and supporting additional local technical sales and marketing efforts. RESPONSIBILITIES Provide support to our Operations and Outside Sales Engineers Make regular sales calls on existing accounts and establish contact with new accounts. Make effective customer presentations. Provide proposals or service contracts for HVM's services and repair work. Coordinate and schedule work with Service Center Manager and with customers. Promote sales through active participation in trade shows and professional societies. Work with Business Administrator to develop weekly invoicing and monthly status reports. QUALIFICATIONS Ability to read one-line electrical diagram/prints. Excellent communication skills, both written and verbal Excellent customer service, organizational, and analytical skills. Proficient in MS Office. Experience with CRM Management preferred. Valid Driver's License. EDUCATION AND CERTIFICATIONS Bachelors Engineering, Electrical or Mechanical Graduate of Electrical Technical School Military equivalent TRAVEL TIME REQUIRED 25% At Vertiv, we offer the stability of a global leader in a growing industry and the opportunity of a startup. We design, manufacture and service the mission-critical infrastructure technologies for vital applications in data centers, communication networks and commercial and industrial environments. With $5.0 billion in revenue, a strong customer base and global reach in nearly 70 countries, our move to establish a standalone business enables us to deliver greater value to our customers and create new opportunities for our people. The successful candidate will embrace Vertiv's Core Principals & Behaviors to help execute our Strategic Priorities. OUR CORE PRINCIPALS: Safety. Integrity. Respect. Teamwork. Diversity & Inclusion. OUR STRATEGIC PRIORITIES Customer Focus Operational Excellence High-Performance Culture Innovation Financial Strength OUR BEHAVIORS Own It Act With Urgency Foster a Customer-First Mindset Think Big and Execute Lead by Example Drive Continuous Improvement Learn and Seek Out Development Vertiv is an Equal Opportunity/Affirmative Action employer. We promote equal opportunities for all with respect to hiring, terms of employment, mobility, training, compensation, and occupational health, without discrimination as to age, race, color, religion, creed, sex, pregnancy status (including childbirth, breastfeeding, or related medical conditions), marital status, sexual orientation, gender identity / expression (including transgender status or sexual stereotypes), genetic information, citizenship status, national origin, protected veteran status, political affiliation, or disability. If you have a disability and are having difficulty accessing or using this website to apply for a position, you can request help by sending an email to ********************** No calls or agencies please. Vertiv will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas such as E, F-1, H-1, H-2, L, B, J, O, or TN or who need sponsorship for work authorization now or in the future, are not eligible for hire. #HVM #LI-HR1
$45k-73k yearly est. Auto-Apply 4d ago
Journeyman Electrician
Cargill 4.7
Lake Odessa, MI job
New, easy-to-apply options are available for this role: chat with our recruiting assistant Ana at careers.cargill.com or text CargillJobs to 60196. Want to build a stronger, more sustainable future and cultivate your career? Join Cargill's global team of 160,000 employees who are committed to safe, responsible and sustainable ways to nourish the world. This position is in Cargill's protein and salt business, where we provide wholesome, high-quality food products to a wide range of customers, from foodservice operators and grocery stores to manufacturers and exporters. Job Location: Lake Odessa, MI Job Type: Full Time Shift(s) Available: 2nd Compensation: $30.60-$41.80/h Sign-on Bonus: $5,000 Relocation Bonus: $5,000 Benefits Information Shift Differential Weekly Attendance Bonus Medical, Dental, Vision, and Prescription Drug Insurance Health and Wellness Incentives Paid Vacation and Holidays 401(k) with Cargill Matching Contributions Flexible Spending Accounts (FSAs) Short-Term Disability and Life Insurance Employee Assistance Program (EAP) Tuition Reimbursement Employee Discounts Principal Accountabilities Troubleshoot mechanical and electrical issues independently Apply strong problem-solving and programming troubleshooting skills, preferably with Allen-Bradley Ensure reliability of manufacturing processes and compliance with standards Perform preventative and annual maintenance on equipment Safely operate hand tools, power tools, and electrical testing equipment Read and interpret mechanical, electrical, and control schematics Follow all safety procedures, including Lockout/Tagout (LOTO) Identify, plan, and execute follow-up maintenance work Prepare and maintain safe, organized work environments Respond to unplanned maintenance needs as directed Accurately complete and document work orders and maintenance records Communicate maintenance updates through written pass-downs Maintain and troubleshoot electronic controls and instrumentation Use diagnostic tools (e.g., oscilloscope, VOM) to test and repair systems Required Qualifications Electrical/Maintenance Journeyman License in the state of Michigan 3 years manufacturing maintenance experience Basic programming and advanced troubleshooting skills, preferably with Allen-Bradley High School or GED Equivalent Be able to troubleshoot PLCs and Ladder logic Be willing to be a part of the Hazmat team Strong electrical & mechanical aptitude Ability to read & interpret blueprints or other forms of engineering drawings Ability to read & interpret detail blueprints, P&IDs, single-lines, and wiring schematics Ability to work weekend and off shift hours as needed Preferred Qualifications Computer literacy and willingness to learn SAP/PPE systems Allen-Bradley programming and troubleshooting experience Maintenance experience in a food processing environment Proficient with test/calibration tools (RTD calibrators, multimeters, etc.) Ability to troubleshoot 480 VAC 3-phase, 120 VAC, and 24VDC circuits Equal Opportunity Employer, including Disability/Vet To apply using chat/text, please click Apply Now button OR use this link to create a login to apply.
$30.6-41.8 hourly 13h ago
Quality Technician
Lincoln Electric 4.6
Bettendorf, IA job
Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Bettendorf Employment Status: Hourly Full-Time Function: Manufacturing Pay Range: ($21/hr - $31.25/hr) Target Bonus: 5.0% Req ID: 27686 Summary Lincoln Electric Automation is seeking a Quality Technician for our Bettendorf, IA location to perform in-process and final inspections, maintain quality standards, and support continuous improvement within a fast-paced automation environment. This role ensures that assemblies, weldments, and tooling meet engineering and customer requirements. In addition to competitive pay, Lincoln Electric offers an annual bonus program, student loan repayment program PLUS tuition reimbursement, medical/dental/vision, paid time off and many more outstanding benefits! Responsibilities Perform in-process and final inspections on assemblies, weldments, and fabricated components. Maintain and calibrate inspection and measuring equipment. Identify and document nonconformities; assist in corrective actions. Work with engineering and fabrication teams to resolve quality issues. Provide feedback to improve workflow, documentation, and process efficiency. Complete inspection reports and quality documentation. Support assembly, fit-up, hydraulic line plumbing, and customer run-off. Assist with field start-up and customer training as needed (overnight travel required). Maintain a clean, safe, and organized work area. Required Education & Experience High school diploma or GED required; technical training preferred. Proficient in reading blueprints and GD&T. Strong attention to detail and organizational skills. Proficient with Microsoft Office (Excel, Word, PowerPoint). Experience with CMM systems (Leica, Faro Arm) and PolyWorks preferred. Knowledge of manufacturing equipment, inspection tools, and procedures. Ability to operate forklifts and overhead cranes safely. Effective communication and teamwork skills. Physical Demands and Work Environment The physical demands and work environment characteristics described herein are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Physical demands: While performing duties of job, employee is typically required to stand; walk; use hands to finger, handle, or feel objects, tools, or controls; reach with hands and arms; balance; stoop; bend; squat; climb; see, talk and hear. Be able to climb ladders; lift hand tools up to 40 lbs. consistently, and parts up to 50 lbs. consistently. Repetition with activity. Specific vision abilities required by the job include close vision, distance vision, depth perception and the ability to adjust focus. Work environment: The noise level in the work environment is usually moderate. Shift: Full time, Monday-Friday (7am-3:30pm), overtime as needed. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.
$21-31.3 hourly 1d ago
Research Scientist
Lincoln Electric 4.6
Euclid, OH job
Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Euclid - 22801 Employment Status: Salary Full-Time Function: Research & Development Req ID: 27300 Purpose To design, develop and evaluate welding machines and associated processes; to conduct applied research into new areas of welding machine design and/or on new welding processes. Job Duties and Responsibilities Utilizes and applies experience in a broad range of fields to understand weld machine development process and interactions between machine design and weld process development/optimization; collaborates with team members and members of the department, providing the benefit of this understanding to enhance the execution of projects Develops new welding machines, software, welding processes and/or test methodologies in accordance with company policies/procedures and in consideration of: Market needs, requiring direct interface with customers, sales and marketing Industry codes, standards, and specifications, and Manufacturing process capabilities, requiring direct interface with manufacturing and methods personnel Establishes standards and methodologies for and conducts evaluations of product performance Develops/refines test methods, as applicable, to support new product development, product evaluations, and competitive benchmarking Facilitates development of manufacturing process capabilities to support introduction of new products Works with minimal direct supervision, conferring with superiors as needed; has appreciable latitude for independent action or decision May provide task oriented direction to Technicians, Technologists and/or Engineers Level I/II/III in the execution of development projects Structures projects for and provides supervision and mentoring to Engineering Interns Maintains records of all work in process and documents interim/final results in the applicable format; these include Project Definitions, Milestone Plans, ES Reports, Technical Reports, Project Tracking Progress Reports and presentations at meetings, seminars, and conferences Basic Requirements Baccalaureate degree in Engineering (or equivalent). Degree in Welding Engineering preferred. Minimum 8 years engineering experience. Processes and applies a broad knowledge of engineering and scientific principles, practices and procedures, within the field of specialization, to the completion of difficult assignments. Computer literate with working knowledge of MS Word, MS Excel, MS Access and MS PowerPoint, as a minimum. Possesses and applies both practical and fundamental understanding of various arc welding processes. Experience with Robotic Programming. Experience with numerical modeling tools including Python is a plus. Excellent written and verbal communication skills. Works effectively in a cross-functional team environment Job Rate: Salary Grade ***The established grade and range for this job is listed above. All applicants should understand that, if selected for a posted job, the actual pay rate will generally fall within the range of the stated grade. Most typically, the pay rate will be set towards the lower end of the range and may vary slightly, depending upon candidate qualifications. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.
$67k-88k yearly est. 3d ago
HACCP Associate
Cargill 4.7
Dayton, VA job
New, easy-to-apply options are available for this role: chat with our recruiting assistant Ana at careers.cargill.com or text CargillJobs to 60196. Want to build a stronger, more sustainable future and cultivate your career? Join Cargill's global team of 160,000 employees who are committed to safe, responsible and sustainable ways to nourish the world. This position is in Cargill's protein and salt business, where we provide wholesome, high-quality food products to a wide range of customers, from foodservice operators and grocery stores to manufacturers and exporters. Job Location: Dayton, VA Job Type: Full Time Shift(s) Available: 2nd Compensation: $20.65/hr Benefits Information Medical, Dental, Vision, and Prescription Drug Insurance Health and Wellness Incentives Marathon Health Clinic (Employer sponsored health center) Paid Vacation and Holidays 401(k) with Cargill matching contributions Flexible Spending Accounts (FSAs) Short-Term Disability and Life Insurance Employee Assistance Program (EAP) Tuition Reimbursement Employee Discounts Principal Accountabilities HACCP Checks Work closely with USDA Assist with department set ups Ensure all safety practices are being followed Responsible for reconditioning station Complete HACCP paperwork Work on production line as needed Required Qualifications Must be eligible to work in the United States without visa sponsorship Must be 18 years or older Ability to read/write/speak English Preferred Qualifications Previous Cargill experience Previous poultry experience Production experience Work history in the last 12 months Considered candidates will receive a phone call from a (952) area code. Please note that this position does not include relocation reimbursement Equal Opportunity Employer, including Disability/Vet
$20.7 hourly 4d ago
Sr. Technical Thermal Sales Engineer, GSA
Vertiv 4.5
Westerville, OH job
The Sr. Technical Thermal Sales Engineer, Global Strategic Accounts (GSA) drives the sales of thermal management equipment by providing technical expertise and guidance. This position focuses on reviewing specifications, analyzing mechanical drawings, and collaborating closely with GSA Account Managers to help meet customer needs and drive business growth. RESPONSIBILITIES Review and respond to RFPs for Vertiv thermal management solutions, including specification analysis, mechanical drawing review, and assistance with initial equipment configurations. Support the development of concept thermal designs and provide technical input on product selection, sizing, and schematic layouts. Participate in virtual or in-person design reviews with customers and internal teams. Collaborate with cross-functional teams such as offering management, engineering, and sales to support product development and customer solutions. Prepare technical documentation and project-specific bid forms as needed. Contribute to account planning and customer engagement strategies by providing technical insights. Serve as the SME for Vertiv during customer visits and industry events as needed. Stay informed on industry trends, technologies, and materials to support continuous improvement and innovation. Provide feedback to product managers to help guide product enhancements and future development. Help to foster a culture of innovation and continuous improvement within the department. Provide training and mentorship to less experienced team members. MINIMUM QUALIFICATIONS Bachelor's degree in engineering, business, or related field of study (or equivalent combination of education and experience). 4-8 years of industry technical experience. Experience in leading/managing high profile projects. Technical knowledge of Vertiv's thermal management product portfolio. Deep market dynamics and industry knowledge. Proven track record of influencing engineering accounts. Experience working with sales offices. Salesmanship and self-confidence to deal with frequent, stressful customer relationship issues. Excellent sales presentation skills. Strong problem-solving skills and ability to translate technical challenges into actionable plans. PHYSICAL & ENVIRONMENTAL DEMANDS No special physical requirements. TIME TRAVEL REQUIRED 30-50% The successful candidate will embrace Vertiv's Core Principals & Behaviors to help execute our Strategic Priorities. OUR CORE PRINCIPALS: Safety. Integrity. Respect. Teamwork. Diversity & Inclusion. OUR STRATEGIC PRIORITIES Customer Focus Operational Excellence High-Performance Culture Innovation Financial Strength OUR BEHAVIORS Own It Act With Urgency Foster a Customer-First Mindset Think Big and Execute Lead by Example Drive Continuous Improvement Learn and Seek Out Development At Vertiv, we offer the stability of a global leader in a growing industry and the opportunity of a startup. We design, manufacture and service the mission-critical infrastructure technologies for vital applications in data centers, communication networks and commercial and industrial environments. With $5 billion in sales, a strong customer base and global reach in nearly 70 countries, our move to establish a standalone business enables us to deliver greater value to our customers and create new opportunities for our people. Vertiv is an Equal Opportunity/Affirmative Action employer. We promote equal opportunities for all with respect to hiring, terms of employment, mobility, training, compensation, and occupational health, without discrimination as to age, race, color, religion, creed, sex, pregnancy status (including childbirth, breastfeeding, or related medical conditions), marital status, sexual orientation, gender identity / expression (including transgender status or sexual stereotypes), genetic information, citizenship status, national origin, protected veteran status, political affiliation, or disability. If you have a disability and are having difficulty accessing or using this website to apply for a position, you can request help by sending an email to ********************** . If you are interested in applying or learning more about this role, please visit the company's career page located on Vertiv.com/Careers. Work Authorization No calls or agencies please. Vertiv will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas such as E, F-1, H-1, H-2, L, B, J, or TN or who need sponsorship for work authorization.
$26k-33k yearly est. Auto-Apply 1d ago
Electrical Engineer - Plant Engineering
Lincoln Electric 4.6
Euclid, OH job
Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Euclid - 22801 Employment Status: Salary Full-Time Function: Engineering Pay Range: Min: 63,800 - Mid - 88,800 Bonus Plan:Profit SharingProfit Sharing % Req ID: 27257 What You Will Do As an Electrical Engineer, you will collaborate in a team environment to design and support industrial electrical systems, which includes various types of equipment new and old. Specific responsibilities include: Engineer solutions to improve equipment reliability, safety, ergonomics, and compliance with ISO 14001, ISO 450001, and other EHS initiatives. Provide technical support to Production, Maintenance, and IT departments, reducing downtime and improving system performance. Develop, design, and update PLC, VFD, and HMI programs using various control automation platforms, including Rockwell, Siemens, and Beijer. Update and maintain National Instruments LabVIEW code for testing applications and equipment. Interface with engineering, manufacturing, maintenance, IT, MES, and Production teams to support facility projects. Apply NEC knowledge for planning industrial equipment installations and work with electricians to update documentation. Supply project leaders with capital cost estimates and timelines, and review capital equipment quotations. Lead projects or project steps, solve complex problems, and act as a resource for colleagues with less experience. Manage outside engineering and construction personnel, ensuring all safety, health, environmental, and compliance aspects meet regulations. Integrate equipment into data collection systems and establish network topologies. Support network backup, device patching management, and control system asset inventory. Compile data from connected devices for organizational use and develop standards for control systems hardware and software. Identify and assume additional responsibilities for projects and processes that align with and drive towards Lincoln Electric Company's 2025 Higher Standard Goals. Education and Experience Requirements This position is posted as a range, candidates with varying levels of experience and qualifications are encouraged to apply. Selected candidate's Job Level and Pay Grade will be determined based upon qualifications and experience. Minimum requirements, Engineer II - Bachelor's degree in electrical engineering with 3+ years of professional relevant engineering experience. Experienced Professional - Has working knowledge and experience in own discipline Continues to build knowledge of the organization, processes and customers Performs a range of mainly straightforward assignments Uses prescribed guidelines or policies to analyze and resolve problems Receives a moderate level of guidance and direction Engineer III - bachelor's degree in electrical engineering with 5+ years of professional relevant engineering experience Senior "Go To" / Career Level Person - Has in-depth knowledge in own discipline and basic knowledge of related disciplines Solves complex problems; takes a new perspective on existing solutions Works independently; receives minimal guidance May lead projects or project steps within a broader project or have accountability for ongoing activities or objectives Acts as a resource for colleagues with less experience May represent the level at which career may stabilize for many years Engineer IV - bachelor's degree in electrical engineering with 8+ years of professional relevant engineering experience. Lead/Specialist - Is recognized as an expert in own area within the organization Has specialized depth and/or breadth of expertise in own discipline or function Interprets internal or external issues and recommends solutions/best practices Solves complex problems; takes a broad perspective to identify solutions May lead functional teams or projects Works independently, with guidance in only the most complex situations Experience Experience with AutoCAD Electrical CAD software. Experience with PLCs, HMIs, VFDs, and test equipment, including Rockwell Automation software, Siemens software, and National Instruments LabVIEW. Knowledge of NFPA 70, 70E, and 79, and other technical codes. Knowledge of basic networking concepts and SQL Database. Skills Demonstrate initiative and accept responsibilities with minimal supervision. Strong ownership and results-driven mindset. Good judgment, self-motivation, and safety consciousness. Excellent organizational skills. Superior written and oral communication abilities. Adaptability to handle diverse assignments and changing priorities. Hands-on work capability and effective collaboration on the shop floor. Critical thinking and exceptional problem-solving skills. Proficiency in supporting and troubleshooting industrial equipment. Flexibility to work off shifts, travel between facilities in Northeast Ohio, and as required. Effective teamwork with employees at all organizational levels. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.
$75k-99k yearly est. 13h ago
Fleet Mechanic - Int
Us Foods, Inc. 4.5
McClellan Park, CA job
ESSENTIAL DUTIES AND RESPONSIBILITIES Troubleshoot, diagnose, rebuild, replace and complete all required repairs on diesel equipment (i.e., tractors, trailers, bobtails, lift gates, etc.). Perform preventative maintenance within DOT standards. Receive road calls, assign third party vendor, and work with business partners on plan of action. Maintain a clean and safe work environment in compliance with workplace safety rules/regulations and government guidelines. Utilize fleet maintenance software system tablet to fully document equipment repair and parts used. Backup to other maintenance shop personnel. Willingness and capacity to assume increased responsibility and certificates. Other duties as assigned by manager. SUPERVISION: N/A RELATIONSHIPS Internal: All Fleet Technicians, Drivers, Coordinators and Manager External: Vendor service providers when required WORK ENVIRONMENT Onsite: The associate in this role is expected to perform assigned responsibilities inside a US Foods maintenance facility. Must be willing to work in extreme temperatures and weather conditions. MINIMUM QUALIFICATIONS Must have 3 years of verifiable hands-on experience as a heavy-duty commercial diesel mechanic. Diagnostic and troubleshooting competency relating to equipment repairs. Successfully demonstrated independent analytical and problem-solving skills. Prior experience in administering appropriate PM program. Must furnish own personal hand tools. Able to read and write legibly (e.g., to attend trainings, hold conversations, receive safety and job-related coaching, and enter information on reports if needed); basic mathematical skills (add, subtract, divide). EDUCATION High school diploma or equivalent required. CERTIFICATIONS/TRAINING N/A LICENSES Must possess a valid driver's license. PREFERRED QUALIFICATIONS Valid Class-A CDL license and DOT certification Experience using fleet maintenance software Welding ability PHYSICAL QUALIFICATIONS OCCASIONALLY: 1% - 33 / FREQUENTLY: 34% - 66% / CONTINUOUSLY: 67% - 100% or NEVER JOB REQUIRES WORKER TO: FREQUENCY: STAND: CONTINUOUSLY WALK: CONTINUOUSLY DRIVE VEHICLE: FREQUENTLY SIT: FREQUENTLY LIFT 1-10 lbs (Sedentary): FREQUENTLY 11-20 lbs (Light): FREQUENTLY 21-50 lbs (Medium): FREQUENTLY 51-100 lbs (Heavy): FREQUENTLY Over 100 lbs (Very Heavy): OCCASIONALLY CARRY 1-10 lbs (Sedentary): FREQUENTLY 11-20 lbs (Light): FREQUENTLY 21-50 lbs (Medium): FREQUENTLY 51-100 lbs (Heavy): OCCASIONALLY Over 100 lbs (Very Heavy): OCCASIONALLY PUSH/PULL 1: FREQUENTLY CLIMB/BALANCE 2: FREQUENTLY STOOP/SQUAT: FREQUENTLY KNEEL: FREQUENTLY BEND: FREQUENTLY REACH ABOVE SHOULDER: FREQUENTLY TWIST: FREQUENTLY GRASP OBJECTS 3: FREQUENTLY MANIPULATE OBJECTS 4: FREQUENTLY MANUAL DEXTERITY 5: FREQUENTLY 1 (Push/Pull: Hand truck, gate, straps, metal ramp, truck door, dolly, boxes, truck gear shift) 2 (Climb/Balance: In/Out Truck/Trailer to cab. On/Off ramp to ground level and side doorsteps and Platform of trailer. Stairs) 3 (Grasp Objects: Hand truck, boxes, cartons, steering wheel) 4 (Manipulate Objects: Boxes, dolly, metal truck ramp, hand truck, paperwork, truck gate, straps) 5 (Manual Dexterity: Typing, use of office machines such as copiers, printers) Compensation depends on relevant experience and/or education, specific skills, function, geographic location, and other factors as applicable by law. The expected base rate for this role is between $33-$36per hour. This role will also receive overtime compensation Benefits for this role may include health insurance, pre-tax spending accounts, retirement benefits, paid time off, short-term and long-term disability, employee stock purchase plan, and life insurance.
$33-36 hourly 4d ago
Embedded Software Engineer
Lincoln Electric 4.6
Euclid, OH job
Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Euclid - 22801 Employment Status: Salary Full-Time Function: Engineering Req ID: 26988 Overview We are seeking a talented and driven Embedded Software Engineer with expertise in Linux systems to join our innovative team. This role blends embedded application development, platform engineering, board support package (BSP) maintenance, and hardware bring-up. You'll collaborate with cross-functional teams to create secure, high-performance software for Linux-based embedded systems. Key Responsibilities Embedded Application Development Design, develop, and maintain applications for embedded Linux environments. Write clean, efficient code in C, C++, and Python. Implement and optimize device drivers, APIs, and middleware. Conduct system-level debugging, performance optimization, and troubleshooting. Create and execute test plans to ensure functionality, reliability, and quality. Partner with QA teams for seamless deliverables. Platform Engineering & BSP Maintenance Maintain and update BSPs across diverse hardware platforms. Work with hardware teams to develop, validate, and configure drivers, kernels, and bootloaders. Lead hardware bring-up for new designs, ensuring smooth software-hardware integration. Security and Compliance Embed security best practices throughout the software stack. Perform vulnerability assessments and risk analyses. Collaborate with security experts to resolve incidents and uphold compliance standards. Collaboration & Mentorship Partner with hardware, firmware, and QA teams to define requirements and solve challenges. Mentor junior engineers and contribute to team knowledge-sharing. Qualifications Bachelor's degree in Electrical, Computer, or Software Engineering (or related field); advanced degrees preferred. Level III: 5+ years of relevant experience. Level IV: 8+ years of relevant experience. Hands-on experience in embedded Linux development, including kernels, drivers, and applications. Strong knowledge of Linux kernel architecture, system calls, and bootloaders. Proficiency with version control systems (e.g., Git) and collaborative workflows. Familiarity with networking protocols, communication interfaces, and embedded hardware. Excellent problem-solving, debugging, and communication skills. Preferred Qualifications Experience with real-time operating systems (RTOS) and low-level programming. Expertise in Yocto Project, OpenEmbedded, and cross-compilation tools. Knowledge of Agile/Scrum methodologies. Background in safety-critical or security-focused systems. Contributions to open-source embedded or Linux projects. Understanding of digital electronics and hardware design. At Lincoln Electric, we invest in your growth through ongoing training, competitive benefits, and a collaborative culture that rewards initiative. Ready to power up your career? Apply now and help us weld the future. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.
$81k-101k yearly est. 13h ago
Mechanical Designer - Weld Systems
Lincoln Electric 4.6
Shelby, MI job
Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Shelby Employment Status: Hourly Full-Time Function: Engineering Pay Range: ($24.00/hr - $38.00/hr) Target Bonus: 5.0% Req ID: 27586 Summary Fori Automation, a Lincoln Electric company, is a global leader in designing and integrating automated assembly, welding, material handling, and testing systems. We deliver world-class automation solutions to leading manufacturers worldwide. We're seeking an experienced Mechanical Designer to join our Weld Systems team in Shelby Township, MI. In this role, you'll design and develop mechanical systems for automated welding equipment, ensuring precision, performance, and manufacturability. At Lincoln Electric, we invest in our people. In addition to competitive pay, we offer an annual bonus plan, tuition reimbursement, comprehensive medical/dental/vision benefits, 401(k) with company match, paid time off, and many other outstanding benefits. What You'll Do Develop mechanical concepts and detailed designs using 2D and 3D CAD tools. Focus design on tooling and fixture creation. Create accurate Bills of Materials (B.O.M.) and design documentation. Apply engineering calculations to verify design integrity (e.g., beam stress). Utilize standard designs, specifications, and part/vehicle data to build robust systems. Organize and maintain CAD files in accordance with company and project standards. Select appropriate materials and components for optimal performance and cost. Ensure all designs meet NAAMS standards and relevant industry standards for construction, safety, and ergonomics. Collaborate with cross-functional teams to deliver high-quality automation systems on time. Required Education & Experience Bachelor's degree in Mechanical Engineering preferred (or equivalent experience). 1+ year of design/layout experience (or 2+ years in a similar role without degree). Experience designing MIG and/or resistance weld machines preferred. Proficiency in 3D CAD (Inventor, SolidWorks, or similar) and 2D AutoCAD. Strong grasp of manufacturing principles, materials, and design best practices. Ability to perform basic engineering calculations and apply advanced algebra and design techniques. Team-oriented mindset with the ability to thrive in an ISO9001:2000 environment Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.
$24 hourly 3d ago
HVM Electrical Technical Sales Specialist - Cleveland
Vertiv 4.5
Cleveland, OH job
Our Outside Sales Engineer is supporting our High Voltage Maintenance business. HVM is an electrical engineering and testing company providing comprehensive testing, maintenance, and engineering services to a variety of industries including utilities, data centers, renewable energy, commercial and industrial industries. This position will report to the Regional Sales Manager covering the Cleveland area and will provide sales and technical support for all the selling resources in that area. The Outside Sales Engineer is responsible for generating new business and maintaining relationships with existing key customers. RESPONSIBILITIES Make regular sales calls on existing accounts and establish relationships with new customers. Make effective customer presentations. Provide proposals or service contracts for HVM's services and repair work. Coordinate and schedule work with Service Center Manager and with customers. Promote sales through active participation in trade shows and professional societies. Work with Business Administrator to develop weekly invoicing and monthly status reports. EDUCATION AND CERTIFICATIONS Bachelor's Degree Engineering, Electrical or Mechanical Graduate of Electrical Technical School Military certification with at least 3 years of directly related work experience will be held as equivalent to the educational requirement. TRAVEL TIME REQUIRED Up to 75% within assigned Cleveland territory Company provided vehicle The successful candidate will embrace Vertiv's Core Principals & Behaviors to help execute our Strategic Priorities. OUR CORE PRINCIPALS: Safety. Integrity. Respect. Teamwork. Diversity & Inclusion. OUR STRATEGIC PRIORITIES Customer Focus Operational Excellence High-Performance Culture Innovation Financial Strength OUR BEHAVIORS Own It Act With Urgency Foster a Customer-First Mindset Think Big and Execute Lead by Example Drive Continuous Improvement Learn and Seek Out Development At Vertiv, we're on a mission to empower the people that will power the future. From a simple swipe to life-changing medicines, from push notifications to generative AI. We design, manufacture, and service the products and solutions that keep the world connected. With $6.9 billion in revenue, a strong customer base and global reach spanning nearly 70 countries, we are uniquely positioned to deliver greater value to our customers and create new opportunities for our people. Vertiv is an Equal Opportunity/Affirmative Action employer. We promote equal opportunities for all with respect to hiring, terms of employment, mobility, training, compensation, and occupational health, without discrimination as to age, race, color, religion, creed, sex, pregnancy status (including childbirth, breastfeeding, or related medical conditions), marital status, sexual orientation, gender identity / expression (including transgender status or sexual stereotypes), genetic information, citizenship status, national origin, protected veteran status, political affiliation, or disability. If you have a disability and are having difficulty accessing or using this website to apply for a position, you can request help by sending an email to ********************** . If you are interested in applying or learning more about this role, please visit the company's career page located on Vertiv.com/Careers Work Authorization No calls or agencies please. Vertiv will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas such as E, F-1, H-1, H-2, L, B, J, or TN or who need sponsorship for work authorization now or in the future, are not eligible for hire. The anticipated salary range for this role in the Cleveland, OH locality is between $94,800 to $118,450 per year plus Sales Incentive Plan-salary ranges for other geographic localities may vary. Certain roles are eligible for additional rewards, including merit increases, annual bonus and stock. These awards are allocated based on individual performance and are role based. In addition, certain roles also have the opportunity to earn sales incentives based on revenue or utilization, depending on the terms of the plan and the employee's role. The role is eligible to participate in a comprehensive and competitive benefits program, including medical, dental, vision, disability, PTO, holiday pay, and 401k. Additional details about total compensation and benefits will be provided during the hiring process. #LI-HR1 #HVM
$70k-118k yearly est. Auto-Apply 4d ago
Manufacturing Materials and Planning Manager
MCC 4.3
Tyrone, PA job
Build your Career with an Industry Leader As the global leader of premium labels, MCC helps brands stand out in competitive markets and inspire positive consumer experiences. Backed by over a century of printing experience, MCC is focused on the future by developing consumer-driven innovations and sustainable packaging solutions. Working for our team, you can truly make a difference. The Planning Manager is responsible for overall site production operations. Creates a work environment which promotes safety, quality, delivery, and cost-effectiveness. Effectively develops teams that can achieve corporate improvement objectives. Accountable for all aspects of plant production performance while ensuring objectives are attained in a cost-effective manner. Drives best practices through the organization and leads process improvement. Why work at MCC: Comp: $85,000-100,000k/yr This is a Dayshift Position Generous benefits package including medical, dental, vision, disability, life insurance and 401(k) Paid Holidays: New Years, Memorial Day, Fourth of July, Labor Day, Thanksgiving, Day after Thanksgiving, Christmas Eve, Christmas Day, plus two floating holidays Responsibilities: Directly, and through delegation, coordinates activities required to assure safety, quality, delivery, and cost meet specified targets. Assures the compliance of behavior-based safety initiatives and continuously improves safety performance. Executes quality control plans for compliance to standards and drives variation reduction within the process. Assesses on-time delivery performance and develops actions to improve and sustain high level of performance. Holds direct responsibility for managing cost by effective management of labor, overtime, and expenditures. Determine staffing requirements weekly and re-deploy resources during the week as needed to address any shifting staffing needs or changes in priorities and scheduling. Reviews and analyzes production reports to determine root causes of variance from budget, and develops and executes corrective actions, using structured root cause analysis, MDI and Policy Deployment methodologies. Using Lean principles, form teams and involve people to improve productivity, decrease lead times, reduce waste and attain customer quality requirements. Reviews and analyzes production reports to determine root causes of variance from budget and develops and executes corrective actions. Recommend and initiate cost reduction programs centered around capital improvements where ROI and pay back criteria are favorable. Promotes, prepares, and participates in kaizen activities. Sustains results. Facilitates the execution of daily Gemba walk by assuring the proper utilization of hour-by-hour, SQDC boards and War Room tools. In conjunction with Human Resource Manager, coordinates appropriate “required to operate” and “required on roles” staffing levels. Directs the efforts of plant supervision to ensure the consistent application of human resource policies, procedures, and plant rules. Assures adherence to safety accountability guidelines. Coaches and mentors team members to assure their ongoing development Stays abreast of new trends and developments in methods, techniques, equipment, tools, materials, and supplies, which might be incorporated into the production process to increase efficiency or better use of resources. Researches and recommends capital equipment purchases. Participates in special projects and performs other duties as assigned. Qualifications: A hands-on leader that is a role model with high integrity, positive influence, and strong business acumen that embraces change, possesses a continuous improvement mindset, and has a passion for exceeding customer and company expectations. Degree in Engineering, Industrial Technology or Business or equivalent 10 years of staff level leadership experience. Minimum of 7 years' experience in Operations and/or Lean Management. Printing industry experience is preferred. Experience in being a change agent in complex transformational activities. Significant experience in implementation of Lean principals as they apply to manufacturing operations. Ability to apply structured problem-solving methodologies to determine root cause of problems and provide effective countermeasures. Excellent communication skills Advanced excel skills Diversity & Inclusion: MCC fosters an inclusive culture that respects and embraces our teammates' diverse backgrounds and experiences, so that everyone can achieve their full potential here. We aspire for our company to truly reflect the diversity of our customers and the markets we serve. We are committed to equal opportunity for everyone, regardless of peoples' gender identity/expression, age, language, sexual orientation, ability, race, socioeconomic status, national origin or other characteristics. #LI-ML1 #appcast For over a century, Multi-Color Corporation (MCC) has crafted premium labels for the world's most iconic and recognizable brands. Our labels elevate emotional connections with consumers and help brands stand out in competitive markets. Honoring our rich history as a market leader, we focus on the future by developing sustainable packaging solutions and consumer-driven innovations. MCC combines global reach with the personalized touch of local service through our network of facilities across 25+ countries. More than 12,000 teammates come together to make our industry-leading work possible and bring our True Colors to life. Join us at MCC, where every product is Labeled with Care. Learn more at ***************** If you need assistance or an accommodation in applying, please contact our Human Resources Department at ***********************. Multi-Color is committed to providing equal employment opportunities and prohibits discrimination based on race, color, religion, sex, national origin, age, disability, veteran status, or any other protected characteristic under applicable law.
$78k-97k yearly est. 2d ago
Presales Electrical Engineer
Vertiv 4.5
Pelzer, SC job
Responsibilities and Measurement Criteria with Time investment Needed on Each: (This will describe the overall core responsibilities of the role, decision making responsibilities etc.) Design and development of UPS subsystems/components in compliance with specifications, EMC/EMI requirements, and applicable standards. PCB design. Detailed analysis of UPS electronic subsystems/components, focusing on performance evaluation, design optimization, component selection and sizing, and control strategy. Collaboration in an interdisciplinary engineering environment (with embedded, test, and mechanical engineers) to define requirements, discuss trade-offs, participate in design verification, and ensure successful integration of single-phase UPS designs. Continuous improvement of existing designs, evaluation of application issues, and resolution of those issues in the design of new products. Evaluation of new technologies to enhance and implement them in new R&D systems and processes. Adherence to agreed-upon project timelines. Preparation of relevant technical reports. Qualifications: Required/ Minimum Qualifications: Master's degree or higher in Electrical Engineering with a focus on power electronics. Proficiency in medium-to-low power circuit topologies, principles of power electronic converters, and semiconductor devices. Additional / Preferred Qualifications: - Hands-on experience with PCB design and layout. Knowledge of electronic design practices for EMC compliance. Strong analytical skills combined with excellent problem-solving abilities and interpersonal communication. Experience in UPS and power module development is highly desirable. Physical & Environmental Requirements: - (To be used majorly for manufacturing jobs.) None Time Travel Needed: 10% OUR CORE PRINCIPALS: Safety. Integrity. Respect. Teamwork. Diversity & Inclusion. OUR STRATEGIC PRIORITIES Customer Focus Operational Excellence High-Performance Culture Innovation Financial Strength OUR BEHAVIORS Own It Act With Urgency Foster a Customer-First Mindset Think Big and Execute Lead by Example Drive Continuous Improvement Learn and Seek Out Development At Vertiv, we offer the stability of a global leader in a growing industry and the opportunity of a startup. We design, manufacture and service the mission-critical infrastructure technologies for vital applications in data centers, communication networks and commercial and industrial environments. With $5 billion in sales, a strong customer base and global reach in nearly 70 countries, our move to establish a standalone business enables us to deliver greater value to our customers and create new opportunities for our people. Vertiv is an Equal Opportunity/Affirmative Action employer. We promote equal opportunities for all with respect to hiring, terms of employment, mobility, training, compensation, and occupational health, without discrimination as to age, race, color, religion, creed, sex, pregnancy status (including childbirth, breastfeeding, or related medical conditions), marital status, sexual orientation, gender identity / expression (including transgender status or sexual stereotypes), genetic information, citizenship status, national origin, protected veteran status, political affiliation, or disability. If you have a disability and are having difficulty accessing or using this website to apply for a position, you can request help by sending an email to ********************** . If you are interested in applying or learning more about this role, please visit the company's career page located on Vertiv.com/Careers Work Authorization No calls or agencies please. Vertiv will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas such as E, F-1, H-1, H-2, L, B, J, or TN or who need sponsorship for work authorization now or in the future, are not eligible for hire. #LI-CM1
$60k-79k yearly est. Auto-Apply 3d ago
Controls Software Engineer
Lincoln Electric 4.6
Shelby, MI job
Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Shelby Employment Status: Hourly Full-Time Function: Engineering Req ID: 26527 Summary Fori Automation, LLC, a Lincoln Electric Company, is a global supplier of welding, assembly, material handling, and testing equipment for automotive and non-automotive customers worldwide. Fori Automation focuses on delivering cost-effective, highly engineered products and systems designed and manufactured globally with localized sales, project management, and service. We are seeking an experienced Controls Software Engineer for our Shelby Township, MI site with a background in industrial software development. The Controls Software Engineer will initially support active projects and then transition to completing projects directly. They will take the lead on developing software on new projects and debug software on new machines. This role requires travel to customer sites for equipment installation and customer interaction. What You Will Do Design PLC software and HMIs for industrial automation equipment Debug and troubleshoot PLC software and HMIs Collaborate with cross-functional teams to maintain project timelines and critical path milestones. Maintain task lists and reports of open items. Maintain project design documentation and prepare customer deliverables. Ensure the controls engineering process is tracked and followed. Assist customers and local tradespeople in troubleshooting equipment issues. Conduct end-user training on equipment operation. Education & Experience Requirements Electrical Engineering or Computer Engineering degree preferred; Mechatronics degrees will also be considered. Minimum of two years of experience as a Controls Engineer or Controls Software Engineer with experience in designing Rockwell Logix 5000 or Siemens S7-1500 family processors. Knowledge or education in electrical circuits, schematic reading, design, and troubleshooting. Experience with electrical CAD systems, such as AutoCAD Electrical and/or ePLAN Experience with PLC programming in ladder and structured text. Experience programming HMIs Travel required: approximately 30% domestic and international. Weekend work may be required based on project schedules. Preferred Experience in computer programming languages, such as VB, C/C++, or C#. Experience with Rockwell and Siemens HMI preferred. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.
$77k-99k yearly est. 1d ago
Project Manager
Lincoln Electric 4.6
Plymouth, MI job
Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Plymouth - 46247 Employment Status: Salary Full-Time Function: Engineering Req ID: 27246 Summary Lincoln Electric is seeking a highly skilled Project Manager to support our Red Viking subsidiary based in Plymouth, MI. This role is responsible for leading complex, high-visibility projects that require significant resources, cross-functional collaboration, and seamless integration across teams. The Project Manager will drive initiatives from concept through final implementation, ensuring quality, budget, and schedule adherence while maintaining strong stakeholder alignment. At Lincoln Electric, we offer career growth potential along with a competitive compensation package, including bonus incentives, student loan repayment, tuition reimbursement, paid time off, paid holidays, a comprehensive benefits package (medical, dental, and vision), retirement plans, and much more. Key Responsibilities Lead projects through the full lifecycle: initiation, planning, execution, monitoring, control, and closure. Define project scope, objectives, deliverables, and success criteria while aligning team members to roles and responsibilities. Develop detailed project schedules, allocate resources, and manage risks to ensure timely and cost-effective completion. Coordinate cross-functional efforts with engineering, manufacturing, procurement, testing, quality, distributors, vendors, and end users. Ensure strict compliance with quality standards; review and approve final project deliverables. Provide regular updates to executive leadership and business unit leaders on project progress, risks, and outcomes. Manage and maintain financial tracking tools including Gross Margin, Operating Profit, Backlog, SG&A, and other key financials. Utilize advanced Excel skills to create and troubleshoot formulas, build reports, and support executive-level reporting. Leverage ERP systems for project tracking, reporting, and ensuring data integrity across business functions. Lead and mentor a team of project engineers, staff engineers, and manufacturing professionals to achieve technical and operational goals. Prepare clear documentation, presentations, and reports for both internal and external stakeholders Required Experience & Education Education: Bachelor's degree in Engineering, Technical Discipline, or Business Administration (with strong technical design and execution background). Experience: 7-10+ years of project management experience in a manufacturing environment. Proven background in advanced capital equipment design, build, and installation (scheduling, procurement, manufacturing, testing, and quality). PMP certification strongly preferred. Project Leadership: Demonstrated success managing scope, budgets, schedules, personnel, and materials within complex organizations. Technical Knowledge: ERP systems experience for project management and reporting. Proficiency with Excel (advanced formulas, financial tracking, reporting). Familiarity with ISO 9001, ISO 14001, ISO 17025, or equivalent standards. Soft Skills: Strong leadership, influence, and negotiation abilities. Excellent written, verbal, and presentation communication skills. High attention to detail and documentation accuracy. Other Requirements: Supervisory experience managing technical professionals. This person will work very closely with a team of project engineers, staff engineers, and manufacturing professionals on a daily basis. Willingness to travel up to 20%. U.S. Citizen or Permanent Resident (ITAR compliance required). Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.
$71k-100k yearly est. 3d ago
Engineering Technologist
Lincoln Electric 4.6
Euclid, OH job
Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Euclid - 22801 Employment Status: Salary Full-Time Function: Engineering Pay Grade and Range: US10-E-26 (Min - $52,300 $52,300.00 - Mid $66,700) Bonus Plan: Profit Sharing : % Req ID: 27438 Summary Lincoln Electric is growing the Plant Engineering team and has outstanding opportunities for an experienced Electrical Engineering Technologist. Our Plant Engineering team is responsible for implementing capital projects and providing engineering support for the Consumable and Machine divisions of Cleveland Operations. Electrical Engineering Technologists play a crucial role in designing the electrical systems for equipment used in manufacturing welding machines and consumables, ensuring that the production floor equipment adheres to corporate objectives related to safety, health, productivity, quality, and continuous improvement. In addition to competitive pay, Lincoln Electric offers a lucrative profit-sharing plan, student loan repayment program PLUS tuition reimbursement, medical/dental/vision, 401(k) with company match, paid time off and many more outstanding benefits. What You Will Do As an Electrical Engineering Technologist, you will collaborate in a team environment to design and support industrial electrical systems, which includes various types of equipment new and old. Specific responsibilities include: Modify solutions to improve equipment reliability, safety, ergonomics, and compliance with ISO 14001, ISO 450001, and other EHS initiatives. Provide technical support to Production, Maintenance, and IT departments, reducing downtime and improving system performance. Maintain, modify and update PLC, VFD, and HMI programs using various control automation platforms, including Rockwell, Siemens, and Beijer. Update and support National Instruments LabVIEW code for testing applications and equipment. Interface with engineering, manufacturing, maintenance, IT, MES, and Production teams to support facility projects. Apply NEC knowledge for planning industrial equipment installations and work with electricians to update documentation. Supply project leaders with capital cost estimates and timelines, and review capital equipment quotations. Lead projects or project steps, solve complex problems, and act as a resource for colleagues with less experience. Manage outside engineering and construction personnel, ensuring all safety, health, environmental, and compliance aspects meet regulations. Integrate equipment into data collection systems and establish network topologies. Support network backup, device patching management, and control system asset inventory. Compile data from connected devices for organizational use and develop standards for control systems hardware and software. Identify and assume additional responsibilities for projects and processes that align with and drive towards Lincoln Electric Company's 2025 Higher Standard Goals. Education & Experience Requirements Level II: Minimum of a Bachelor's degree required in Electrical Engineering Technology and 3+ years' experience Level Ill: Minimum of a Bachelor's degree required in Electrical Engineering Technology and 5+ years' experience Level IV: Minimum of a Bachelor's degree required in Electrical Engineering Technology and 8+ years' experience Experience with AutoCAD Electrical CAD software. Experience with PLCs, HMls, VFDs, and test equipment, including Rockwell Automation software, Siemens software, and National Instruments LabVIEW. Knowledge of NFPA 70, 70E, and 79, and other technical codes. Knowledge of basic networking concepts and SQL Database. Skills Demonstrate initiative and accept responsibilities with minimal supervision. Strong ownership and results-driven mindset. Good judgment, self-motivation, and safety consciousness. Excellent organizational skills. Superior written and oral communication abilities. Adaptability to handle diverse assignments and changing priorities. Hands-on work capability and effective collaboration on the shop floor. Critical thinking and exceptional problem-solving skills. Proficiency in supporting and troubleshooting industrial equipment. Flexibility to work off shifts, travel between facilities in Northeast Ohio, and as required. Effective teamwork with employees at all organizational levels. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.
$52.3k-66.7k yearly 4d ago
Applications Design Engineer
Lincoln Electric 4.6
Coldwater, OH job
Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Coldwater Req ID: 27956 Position Summary Identify the manufacturing process, recommend the machinery concept, accurately develop the cost model, create quotations and provide other supporting information as needed to sell Lincoln Electric Automation-designed equipment. Role Qualifications Must be familiar with Company quality objectives and play an active role in reaching continuous improvement objectives. Play an active role reviewing and developing customer process requirements as it pertains to the application of our products. Play an active role in communicating issues that could impact customer satisfaction. Position Responsibilities Evaluate the feasibility of automation systems based on data supplied by Sales, Engineering, Management and Customers Develop manufacturing processes and concepts capable of producing systems or products Research and develop accurate cost estimates for Lincoln Electric Automation equipment. Write technical quotations and produce supporting documentation as needed. Assist as necessary with customer communication, presentations, and trade related events. Follow-up as necessary with sales, customers, and representatives. Responsible for following Department ISO procedures Essential Skills and Experience Minimum High School Diploma, Associate degree in technical discipline desired or equivalent years of experience. CAD (3D modeling a plus) Preferred 8-10 years of experience in manufacturing and design (mechanical/electrical) of industrial automated equipment. Metal forming (bending, forming, piercing, etc.) and metal joining (Laser, arc, resistance welding, etc.) experience preferred. Preferred 1-2 years of experience working with customers and suppliers. Proficient in Word, Excel and PowerPoint Effective writing and communication skills. Commitment to company values Educational, training, and experience requirements may be modified at the Managements Team's discretion Nonessential Skills and Experience Computer proficiency, including spreadsheet, word processing, and project management software. FMEA, Equipment Capability, Safety (OSHA Stds.) Environmental, Health & Safety (EH&S) Understand the Company's EHS Policy and how it relates to this job. Be aware of OSHA & EPA laws and regulations as well as the Company's Plant Rules and Regulations that pertain to this job. Work in a safe and environmentally friendly manner and observe all company EHS procedures. Know that the company EHS procedures are located on the ISO drive. Immediately notify the Supervisor if there is any safety hazard, any equipment not operating correctly, or if there are any questions regarding EHS procedures. Attend required EHS training Reporting to this position: No direct reports Physical Demands and Work Environment The physical demands and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Physical demands: While performing duties of job, employee is occasionally required to stand; walk; sit; use hands to finger, handle, or feel objects, tools, or controls; reach with hands and arms; talk and hear. Repetition with activity; computer work. Specific vision abilities required by the job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. Work environment: The noise level in the work environment is usually moderate. ISO-14001 Complies with ISO 14001, and other relevant standards. Support, implement and understand the intent of the EMS policy. Participates with ISO-14001 as required. AS 9100 w/ ISO 9001 Complies with AS9100D and ISO 9001:2015 quality management system, procedures, and work instructions General sign-off: The employee is expected to adhere to all company policies. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.
$56k-73k yearly est. 4d ago
Warehouse Order Selector
Sysco 4.4
Sysco job in Grand Rapids, MI
Industry-leading total rewards package On-the-job training with career growth opportunities No college degree or previous warehouse experience required! Overtime opportunities Work in a Sysco warehouse and be a critical member of the foodservice supply chain. Warehouse Selectors pick orders for delivery to foodservice venues in the local community. + Active, physical role that includes operating an electric pallet jack, and/or forklift + Organizing and palletizing product to build customer orders + Other duties as assigned. Safe working environment, working in areas with temperature and humidity variations based on local weather conditions and type of product being selected (i.e., non-refrigerated, refrigerated, and frozen.) **Minimum Requirements** + Must be at least 18 years of age. + 0 - 1 Year relevant work experience. + Frequently lift product that weighs 10lb - 75lbs and up to 100lbs. + Frequently reach up to 72 inches. + Constantly bend and twist while operating an electric pallet jack or forklift, retrieving products from lower shelf areas. + Work in very extreme temperatures (cooler and/or freezer). + Work on your feet for 10 - 12 hours daily. **Preferred Requirements** + 1 year experience operating an electric pallet jack or forklift. + 1 year of warehouse, military, or physically active job experience. + 1 year Selection Experience. + 2 years consistent work history preferred. AFFIRMATIVE ACTION STATEMENT: Applicants must be currently authorized to work in the United States. We are proud to be an Equal Opportunity and Affirmative Action employer, and consider qualified applicants without regard to race, color, creed, religion, ancestry, national origin, sex, sexual orientation, gender identity, age, disability, veteran status or any other protected factor under federal, state or local law. This opportunity is available through Sysco Corporation, its subsidiaries and affiliates.
$34k-42k yearly est. 60d+ ago

Sysco jobs in Grand Rapids, MI

Market VP, Operations

Field Service Technician - Cedar Rapids, IA

HVM, Inside Sales Engineer - Pittsburgh

Journeyman Electrician

Quality Technician

Research Scientist

HACCP Associate

Sr. Technical Thermal Sales Engineer, GSA

Electrical Engineer - Plant Engineering

Fleet Mechanic - Int

Embedded Software Engineer

Mechanical Designer - Weld Systems

HVM Electrical Technical Sales Specialist - Cleveland

Manufacturing Materials and Planning Manager

Presales Electrical Engineer

Controls Software Engineer

Project Manager

Engineering Technologist

Applications Design Engineer

Warehouse Order Selector

Learn more about Sysco jobs

Most common locations at Sysco

Working at related companies

Related companies jobs

Jobs in nearby cities