Telecom technician jobs in Germantown, WI

Details Department:Imaging Schedule:Full Time|Evening|8 hr Shifts Hospital:All Saints Hospital *NEW GRADS Welcome!* #NextGenHealthcare Benefits Paid time off (PTO) Various health insurance options & wellness plans Retirement benefits including employer match plans Long-term & short-term disability Employee assistance programs (EAP) Parental leave & adoption assistance Tuition reimbursement Ways to give back to your community Benefit options and eligibility vary by position. Compensation varies based on factors including, but not limited to, experience, skills, education, performance, location and salary range at the time of the offer. Responsibilities Perform computerized tomographic procedures for the diagnosis of disease and injury according to protocols established by radiologists. Prepare and position patients and select anatomic and technical parameters accurately. Prepare and administer contrast media and/or medications within the accepted scope of practice and applicable state and federal regulations. Observe patient during procedure and report abnormal activity. Monitor protocols and recommend updates or refinements as warranted. Follow radiation safety procedures and guidelines. Requirements Licensure / Certification / Registration: BLS Provider obtained within 1 Month (30 days) of hire date or job transfer date required. American Heart Association or American Red Cross accepted. Radiologic Technologist credentialed from the Wisconsin Radiography Examining Board obtained prior to hire date or job transfer date required. One or more of the following required: Nuclear Medical Tech credentialed from the Nuclear Medicine Technology Certification Board (NMTCB) obtained prior to hire date or job transfer date. NMTCB(CT) Computed Tomography Specialty Certification or ARRT(CT) Radiologic Technologist specializing in Computed Tomography required in addition to CNMT Certified Nuclear Medicine Technologist Certification. Radiologic Technologist specializing in Radiography credentialed from the American Registry of Radiologic Technologists (ARRT) obtained prior to hire date or job transfer date. Nuclear Medicine or Radiation Therapy specialty also accepted. Radiologic Technologist specializing in Computed Tomography credentialed from the American Registry of Radiologic Technologists (ARRT) obtained prior to hire date or job transfer date. Education: High School diploma equivalency with 2 years of cumulative experience OR Associate's degree/Technical degree OR 4 years of applicable cumulative job specific experience required. Why Join Our Team Ascension Wisconsin has been providing rewarding careers to healthcare professionals since 1848. Operating 17 hospital campuses and over 100 related healthcare facilities from Racine to Appleton, you will find opportunities that allow you to create a career path you love, all while delivering compassionate, personalized care to the communities we serve. Ascension is a leading non-profit, faith-based national health system made up of over 134,000 associates and 2,600 sites of care, including more than 140 hospitals and 40 senior living communities in 19 states. Our Mission, Vision and Values encompass everything we do at Ascension. Every associate is empowered to give back, volunteer and make a positive impact in their community. Ascension careers are more than jobs; they are opportunities to enhance your life and the lives of the people around you. Equal Employment Opportunity Employer Ascension provides Equal Employment Opportunities (EEO) to all associates and applicants for employment without regard to race, color, religion, sex/gender, sexual orientation, gender identity or expression, pregnancy, childbirth, and related medical conditions, lactation, breastfeeding, national origin, citizenship, age, disability, genetic information, veteran status, marital status, all as defined by applicable law, and any other legally protected status or characteristic in accordance with applicable federal, state and local laws. For further information, view the EEO Know Your Rights (English) poster or EEO Know Your Rights (Spanish) poster. As a military friendly organization, Ascension promotes career flexibility and offers many benefits to help support the well-being of our military families, spouses, veterans and reservists. Our associates are empowered to apply their military experience and unique perspective to their civilian career with Ascension. Pay Non-Discrimination Notice Please note that Ascension will make an offer of employment only to individuals who have applied for a position using our official application. Be on alert for possible fraudulent offers of employment. Ascension will not solicit money or banking information from applicants. This Ministry does not participate in E-Verify and therefore cannot employ STEM OPT candidates.

Job Title: Telecom Analyst / VoIP Technician Duration: 12 Months Compensation: $28 /hour W2 Benefits: Medical, Dental, Vision, Life Insurance, Disability, Paid Sick Time, 401K ABOUT OUR CLIENT / ABOUT THE ROLE Medix is currently seeking a Telecom / VoIP Technician for a contract opportunity with one of our healthcare clients in the Milwaukee area. Our client is a large health system, going through a company-wide VoIP refresh. This Technician will be assisting this effort by unboxing, setting up and validating the new IP Phones. There will also be cabling and patch panel management (66 and 110 wiring punch down blocks). Please note that this role is onsite Monday - Friday, based out of Milwaukee RESPONSIBILITIES Working in a hospital setting Unboxing and deploying new VoIP phones Connecting phones to the network switches Running and connecting area cabling (CAT6) Managing 66 and 110 wiring punch down blocks Testing /validating connections Running / managing clean and efficient cabling in the closets and data centers REQUIRED QUALIFICATIONS Minimum 2 years professional experience in setting up VoIP Phones Ethernet Cabling (66/110) Ability to lift up to 25+ lbs ADDITIONAL INFORMATION Please note, this role will require the physical requirements of being able to lift up to 25lbs, and navigate cabling

Founded in 1985, ATS is a company with a presence in the United States, Mexico and the United Kingdom. We are professionals in Industrial Maintenance and we make factories run better. Fundada en 1985, ATS es una empresa con presencia en los Estados Unidos, México y el Reino Unido. Somos profesionales en mantenimiento industrial y hacemos que las fábricas funcionen mejor. Principal Duties/Responsibilities: · Performs expert level break-fix & preventative maintenance. This includes but is not limited to: observing devises in operation to location root cause of problem; dismantling devices to gain access to and remove defective parts; examining parts to detect imperfections; adjustment of functional parts of devices and control instruments; repair and/or replacement of defective parts; testing of device to observe performance; and performing tests for electrical circuitry and mechanical systems; reconditioning and repairing machine tools. · Identifies and sources parts, supplies and repair items as necessary. Performs evaluations of alternatives to improve cost and / or reliability of equipment. · Independently performs maintenance as per industry standards. · Works with customer counterparts to optimize maintenance, reliability, and preventative maintenance procedures. · May be required to setup and operate multiple machining operations including but not limited to: lathe, drill press, grinder, and other metalworking tools to make and repair parts. May perform welding tasks. · Conforms and complies with customer contractor codes of conduct, housekeeping standards, and safety processes · Documents work performed in service reports, applicable management systems, and written explanation regarding observation and collected equipment performance data. · Provides assistance to lower level technicians and leadership to project teams. Performs expert functions as a part of training and development. · Troubleshoots and analyzes complex control systems to resolve in-depth software/ hardware and configuration problems. · Utilizes advanced maintenance technologies to collect equipment performance data. Observes trends and makes recommendations. · Completes and conducts on-the-job training and technical self-study programs for career development. · Follows all safety related policies, rules, regulations, technical instructions and guidelines. Situational awareness and identify unsafe behaviors and conditions. Knowledge, Skills, Abilities (KSAs), & Competencies: Essential KSAs: · High School Graduate or equivalent (GED). · Associates degree with a Technical focus and 10 years of related experience in specific industry; or, 12 years of experience in specific industry. · Possesses comprehensive understanding of electrical, mechanical, fluid power and control systems. Can analyze the problem, synthesize alternative solutions, and perform repairs. · Must be able to use basic hand tools and specialized tools as appropriate. · Extensive travel required. (Local, National). Applicants can live anywhere within the Continental U.S Desirable KSAs: · Experience in condition based maintenance techniques, precision mechanical alignments, and maintenance of applicable process equipment. · Experience in programmable logic controllers, field device troubleshooting, and maintenance of electrical drive and motor systems. Competencies: · Communications · Customer Focus · Personal Discipline · Safety Physical Demands and Working Conditions: While performing the duties of this job, the employee is regularly required to stand; walk; use hands/fingers to handle, or feel; reach with hands and arms; climb, ascend/descend or balance to heights that may require a ladder or lift; stoop, kneel, crouch, or crawl in confined spaces; and talk or hear. The employee is occasionally required to sit. The employee must occasionally lift and/or move more than 50 pounds. The employee is regularly required to use close vision and color vision. The employee is occasionally exposed to outside weather conditions and risk of electrical shock. Work is typically performed in a factory environment and is usually very loud. In the factory environment, the employee may be exposed to hazardous materials and/or greasy or slippery factory floors. ATS is committed to providing equal employment opportunities in all aspects of employment to all applicants and employees without regard to age, color, race, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, disability, veteran status, genetic information, or other legally protected status. Review the privacy policy here. ATS se compromete a brindar igualdad de oportunidades de empleo en todos los aspectos del empleo a todos los solicitantes y empleados, independientemente de su edad, color, raza, religión, sexo (incluido el embarazo, identidad de género y orientación sexual), origen nacional, discapacidad, estatus de veterano, información genética u otro estatus legalmente protegido. Revisión de la política de privacidad aquí here.

We are seeking Cable Techs to support structured cabling and low voltage work at a hyperscale data center project. Ideal candidates will have electrical, wiring, or cabling experience. This role offers plenty of overtime-up to 60 hours a week-perfect for someone looking to earn and grow in a fast-paced environment. What You'll Do: Install, terminate, and splice CAT5e, CAT6, and fiber optic cables Run and route cable, label, dress, and assist with testing Help build out MDF/IDF rooms, racks, patch panels, and trays Follow all site safety and quality standards Work alongside experienced techs and learn on the job What We're Looking For: 2-3 years of experience working in Data Center environments - structured cabling or low voltage Comfortable using hand/power tools and working on ladders or lifts Reliable, hardworking, and eager to learn Open to working overtime and weekends as needed Experience with copper and fiber terminations Must have PPE and reliable transportation OSHA/BICSI certs a plus

Dürr CTS (Clean Technology Systems) develops advanced environmental technologies to make industrial production cleaner, safer, and more efficient. Across all our product lines, Dürr CTS offers responsive, local, and skilled service teams, delivering customer-focused support in maintenance, troubleshooting, spare parts, and plant modifications. Since November 1st, 2025, Dürr CTS has operated independently, with 1,300 employees across 12 countries. We provide reliable and innovative environmental technology solutions, helping customers worldwide meet their regulatory and sustainability goals. Our Portfolio Includes: Air Pollution Control: thermal oxidation, sorptive processes, particulate matter separation Noise Abatement: Silencer products, filtration, gas turbine inlet and exhaust systems by Dürr Universal Decentral Power Generation: Organic Rankine Cycle systems with Cyplan ORC We serve a wide range of industries, including chemical, pharmaceutical, food, automotive, energy, surface coating, and many more, providing tailored solutions that help customers meet environmental regulations, reduce emissions, ensure operational reliability, and improve sustainability. We're Looking for People Who: Can be the face of our company to our customers Love to travel and experience new work environments Enjoy navigating challenges that require you to think on your feet Have a high mechanical aptitude Crave personal development and improvement What We Do: Durr Universal provides noise and environmental solutions to our customers. For more than 65 years, we have supported our customers through our design, manufacturing, and installation of acoustic and emissions systems. We work to continually improve our knowledge of our equipment, our customers' processes, and how the two interact. Why We're in Business: Durr Universal provides value-added solutions to our customers. We pride ourselves on the thoroughness of our pre-sale consultation and solution development, the quality and longevity of our equipment, and our best-in-class service from initial customer inquiry through the life of the equipment. We seek long-term partnerships with customers that value our approach. This position will oversee all activities of both Durr Universal internal and Field Service contractors and report on the performance of the department functions with appropriate personnel in the company. This position will require working with the Field Service Technicians, Project Managers, Sales, Engineering, 3rd party Contractors, and site customers to ensure overall contract requirements are successfully met for field service work, warranty repair, quality inspection, and technical supervision. This position requires travel from 70% to 90% to various potential customer sites to assist in quoting, supervision, auditing, inspection, etc. of dedicated Field Service Teams, along with assisting and overseeing field service project work scopes and related scopes. The Field Service Supervisor/TFA must plan, organize, direct, and manage the work of individual field service technicians and contractors in various field operations. Essential Functions: Put safety first in everything you do and help ensure our colleagues, customers, and business partners remain safe at all times. Be the liaison between the customer, contractor, and Dürr staff Assist in the installation of Dürr and other equipment Manage all 3rd party subcontractors, ensure work is done safely, properly, and on time and in budget. Work with site personnel and internal personnel on project issues and resolve them effectively. Develop cost estimates and customer proposals for field installation projects. Creation and deployment of mobilization schedules for the field service department. Assist in equipment commissioning and documentation as required Participate in contract reviews and kick-off meetings involving the field service scope of work. Assist with parts procurement as needed When required provide customer training on installed equipment Provide equipment modular build support as required Experience and Skills: Must make safety a priority every day AWS Certified Welding Inspector (CWI) is a plus Painting and coatings certification/ experience is a plus OSHA 10 or 30 Hour Safety Trained Familiar with MS Word, Excel, and PowerPoint Desire to travel Ability to read and interpret engineering drawings and technical documents (i.e. layout, sectional drawings) Excellent written and verbal communication skills Desire to work hands-on in an industrial environment Proven mechanical aptitude - including the use of various machining tools, welding equipment and methods, and various testing equipment Demonstrated experience with installation and inspection of large steel structures (ducting and tall stacks, steel platforms) and their welding processes, inspection of welds, and industrial coatings Working experience with safe lifting & rigging methods Fully capable with Microsoft Office software package Flexible to adapt to same-day and next-day changes Ideal candidate will have experience developing RFQ/RFPs for work that would be subcontracted to 3rd party vendors. Experience with steel fabrication and custom equipment manufacturing. Position can be located anywhere near a major airport Dürr CTS, Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. We maintain a drug-free workplace and perform pre-employment drug and alcohol testing. Note to all Staffing Agencies: Dürr CTS, Inc. has a team of dedicated Human Resources professionals who are responsible for all hiring needs. Our practice is to partner and work with our approved vendors on an as-needed basis. We do not accept resumes from agencies that are not on our preferred vendor list and have not signed our Recruiting and Permanent Placement Contract. Any resumes submitted from unapproved vendors will be considered unsolicited, and Dürr will not be obligated to pay a referral fee.

Job Description: This is your chance to make your mark. Introducing our customers to the world's most robust network all while delivering best-in-class service. You're the key to elevating the customer experience, providing seamless installation and activation of our state-of-the-art technology. And you'll get the satisfaction of helping others and connecting our customers to what matters most to them every day. connectourcustomers Our Installation Technicians earn between $21.25 and $29.78 hourly. With our amazing wage opportunities, our average starting earnings begin at $44,200 per year. Individual starting salary within this range may depend on geography, experience, expertise, and education/training. Joining our team comes with amazing perks and benefits: Medical/Dental/Vision coverage 401(k) plan Tuition reimbursement program Paid Time off and holidays (With some exceptions bargained employees qualify for one week of PTO after 6 months of service and 2 weeks after the first year). At least 6 company designated holidays and additional PTO (based on bargaining group to which you are hired. Sick leave Paid Parental Leave Adoption Reimbursement Disability Benefits (short term and long term) Life and Accidental Death Insurance Supplemental benefit programs: critical illness, accident hospital indemnity/group legal Employee Assistance Programs (EAP) Employee discounts up to 50% off on eligible AT&T mobility plans and accessories, AT&T internet (and fiber where available) and AT&T phone What's a typical day like? You'll work independently at our customer's homes and businesses as a trusted expert, installing the latest technology for high-speed broadband, Wi-Fi, and voice services. You'll have the opportunity to meet new people every day while solving problems and being rewarded for doing great work. Whether you're putting in a new line, climbing a ladder or simply plugging in and activating a wifi network, one thing is true, no two days will be the same. Want to be considered? You'll need to: Work a flexible schedule, including evenings and weekends. Possess a valid state driver's license. Lift and move up-to 60 lbs - some of our ladders weigh 50-60 lbs Weigh less than 325 lbs., required for ladder safety. At times work in small spaces or aloft (up to 28 ft.) Be available for overtime, emergency callouts and holiday work. Identify wire and cable colors. Qualify on pre-employment assessments. Have a High School Diploma or GED Interested? We provide extensive training and the resources you need in a collaborative and dynamic team environment, built for your success. You'll have the opportunity to continue to learn and grow with ongoing paid training, leading you to exciting career paths. If you are considering jobs like Maintenance Technician, Cable Installation Technician, Fiber Technician, Facility Technician or Telecommunications Technician, this career move would be a great fit! Ready to take your career on the road to success? Apply today! Weekly Hours: 40 Time Type: Regular Location: Mount Pleasant, Wisconsin It is the policy of AT&T to provide equal employment opportunity (EEO) to all persons regardless of age, color, national origin, citizenship status, physical or mental disability, race, religion, creed, gender, sex, sexual orientation, gender identity and/or expression, genetic information, marital status, status with regard to public assistance, veteran status, or any other characteristic protected by federal, state or local law. In addition, AT&T will provide reasonable accommodations for qualified individuals with disabilities. AT&T is a fair chance employer and does not initiate a background check until an offer is made. d24ad0b8-823f-4e68-a892-2986ccdf7392

Title: Diesel Mechanic KAG is North America's largest tank truck transporter and logistics provider, delivering energy commodities, specialty products, merchant gases and food products across the United States, Canada and Mexico. Our dedicated team of Diesel Mechanics is an essential function of our business, and we are looking to hire talent to lead the way to success! Starting hourly rate ranges from $21 to $45. Please note: The hourly hiring rate will vary based on a number of factors: skill level and experience of the applicant, geographic location, and business needs. By applying, candidates acknowledge these terms. Hours: Alternating Monday through Thursday/ Tuesday through Friday from 2p-midnight Relocation: Reimbursement Available KAG is now seeking to hire all levels of Diesel Mechanics - Apprentice, Levels I, II, III, and HM183 certified! Here are some of the benefits of joining our company: Opportunities for growth with extensive onsite paid training Guaranteed Pay Increases with completion of training programs and verified prior experience $100Boot Allowance paid in quarterly installments $250 Semi-Annual Tool Allowance after one year of service (up to $500 Annually) Benefits Available (Medical/Dental/Vision/401K Match) Paid Vacation and Holidays Diesel Mechanic Position Summary: This position is required to safely and accurately perform general property and vehicle maintenance & repair duties in and around the shop operations in a fast-paced environment. Knowledge and understanding basic preventative maintenance and repair techniques of Class 5 through Class 8 commercial vehicles to include tank trailer inspection and maintenance related to the Federal Motor Carrier Safety Administration (FMCSA) regulations is required. Diesel Mechanic Essential Functions: All fleet mechanic positions will be required to perform vehicle maintenance & repair duties safely and accurately in and around the shop operations in a fast-paced environment. Fleet Mechanic Apprentices will receive hands on training and instruction on preventive maintenance/inspections/repairs of Class 5 through Class 8 Commercial Vehicles and maintenance/inspection of tank trailers. Fleet Mechanic Levels I & II will learn and become proficient utilizing the company's maintenance software program to create and complete work orders and maintain work order/vehicle maintenance records. They will also train/assist other technicians in performing preventive/repair of facilities and equipment to include trucks, tractors, and trailers. Fleet Mechanic Level III will build on the duties from Diesel Mechanic I/II and become qualified as necessary with appropriate certifications to perform new technology evaluations, diagnosis, and repairs. HM183 will build on the duties of a Level III Diesel Mechanic, Certified as a (DOT) commercial motor vehicle inspector in compliance with FMCSR's Has been signing test forms as the Registered Inspector for at least 3 years. Pay Range: - , General Benefits: Requirements for Fleet Mechanic Level I, II, and III Positions: Valid Driver's License Minimum 1 - 5 years of experience in heavy-duty vehicle maintenance/repair (Tech levels will be determined by years of experience and certifications) Holds a current Air Brake Certification in compliance with FMSCR 396.25 or has at least 1 year of verifiable experience with the ability to obtain Air Brake Certification through KAG EPA 609 certification (Motor Vehicle Air Conditioning Repair) or the ability to obtain certification through KAG Requirements for HM183 Positions: Valid Driver's License Verifiable proof of 3-year tank testing commercial motor vehicle inspector in compliance with FMSCR or has at least 1 year of verifiable experience under a qualified inspector with the ability to obtain (DOT) commercial motor vehicle inspector certification through KAG Physical Requirements: LIFTING REQUIREMENTS: Frequently lifting up to 50 pounds. Anything over 50 pounds is lifted with assistance. Kenan Advantage Group, Inc. is an equal opportunity employer. No person will be discriminated against in any aspect of their employment on the basis of any status or characteristic protected by applicable federal, state or local law Note: The above statements are intended to describe the general nature and level of work being performed. They are not intended to be construed as an exhaustive list of all responsibilities and skills required of associates so classified. Management retains the right to assign or reassign duties at any time. Job description is subject to change. All employees of the Company are expected to: Promote positive work habits including effective and timely communication, teamwork and respect for co-workers. Provide constructive guidance to other employees and representatives of third parties. Contribute to providing the highest quality of products and services to customers #TechHOT

Our large financial/banking client is currently seeking a Datacenter Technician This is a contract to hire role that must be done onsite on in the southwest Racine area W2 only, no C2C or third parties. This job will have the following responsibilities: Coordinate with Data Center and Field Site teams, Facilities, and contractors to successfully execute structured cabling builds Work with design team to develop timely project specific specification and scope documentation, including floor plans, pathway and rack layouts, rack elevations, cable schedules, and bill of materials for all ISP and OSP cabling Coordinate infrastructure technologies (AV, Network, Voice, IP security systems) for Enterprise Facilities driven projects Collaborate with internal stakeholders to deliver designs, meeting capacity and network requirements and go-live timelines Qualifications & Requirements: Experience designing, deploying and maintaining complex data center environments (new facility, major facility renovations/expansions) Understanding of indoor/outdoor cable plants, including copper cabling, long range/short range fiber optic cabling Knowledge of information technology infrastructure components (LAN/WAN/SAN, firewalls, Wintel/Lintel/UNIX servers, storage, roll-on equipment, wireless, DAS) Data center and/or networking industry certifications preferred

at General Parts Group Sign-on bonus available for select roles and candidates, based on hiring manager discretion and business needs. Not all hires will be eligible. General Parts is looking for a skilled Field Service Technician to repair and maintain commercial kitchen equipment in schools, healthcare facilities and restaurants throughout your area.Combi Oven troubleshooting experience is a plus. Pay & Benefits:💲 $25-45/hr (based on experience) with growth opportunities🚗 Company vehicle - dispatched from home📚 Ongoing training & career advancement✅ Great benefits - PTO, 401(k) match, profit sharing, medical, dental, and more!What You'll Do:🔧 Troubleshoot, repair, and maintain commercial cooking, refrigeration, and HVAC equipment👷 Provide service solutions for gas, electric, and steam systems🛠 Order and install replacement parts📞 Participate in after-hours & weekend on-call rotations Why Join Us?🛠 Fully equipped - service vehicle, tools, tablet, cellphone, uniforms, and paid laundry📈 Advancement - CFESA certification & ongoing training provided💰 Extra earning potential - Overtime (Saturday), Double-Time (Sunday & holidays) What We Need:✔ Valid driver's license and driving record that meets our safety standards✔ Completion of a criminal background check and drug screen✔ 2+ years of related experience, education, or military training preferred✔ EPA certification (for refrigeration techs)✔ Strong mechanical aptitude & ability to lift up to 50 lbs✔ Must be at least 18 years of age General Parts Group is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees.

Current Employees: If you are currently employed at any of the Universities of Wisconsin, log in to Workday to apply through the internal application process. Position Title:UC Facilities Technician - UC | Building OperationsJob Category:University StaffEmployment Type:RegularJob Profile:Facilities Technician IIIJob Duties: The Department of University Center Building Operations at the James R. Connor University Center at the University of Wisconsin-Whitewater seeks a UC Facilities Technician (Facilities Technician III, FP031). The Facilities Technician III is responsible for inspecting, maintaining, and repairing specialized equipment and facilities to ensure property meets established standards and to prevent further damage. This position supports the University Center, Drumlin and Esker Dining Halls, and the Moraine Bookstore buildings. General duties include all non-mechanical maintenance, including electrical troubleshooting and repair, while also assisting with construction, design, and operational maintenance as needed. This position reports directly to the UC Facility Services Supervisor and is classified at level 2 for risk of exposure to blood borne pathogens. Work shifts are typically 8 hours, generally Monday-Friday from 6:00 a.m. to 2:00 p.m., but may vary based on institutional needs. The Facilities Technician III collaborates closely with campus partners including University Housing, Facilities Planning & Management (FP&M), and other stakeholders to ensure building systems and maintenance needs are coordinated effectively across campus. Job Responsibilities: General Maintenance and Inspections (70%) Inspects, maintains, and repairs specialized equipment and facilities to ensure property meets established standards and to prevent further damage. Expanded to include carpentry, flooring, painting, wall/ceiling repair, and door/hardware maintenance (e.g., fabrication, installation, and repair of furniture, finishes, and fixtures). Utilizes specialized equipment to repair and maintain complex machinery, equipment, and facility property to prevent further damage and ensure optimal operation. Includes electrical troubleshooting and repair such as lamps, switches, outlets, wiring, and preventive inspections. Performs routine and non-routine facility inspections and monitors cleanliness. Ensures assigned UC facilities, dining halls, and bookstore meet safety and cleanliness standards. Troubleshoots, escalates, and documents issues according to established policies and procedures. Coordinates responses with Housing, FP&M, contractors, and vendors. Supervises and directs student work crews to support daily operations. Provides snow removal and maintains shop equipment and tools. Project Work and Renovations (20%) Assists trades, crafts, vendors, and technical staff with construction, design and operational maintenance as needed. Includes drywall, partitions, painting, and finish work, as well as minor electrical installation projects. Collaborates with FP&M, Housing, and other partners to align projects with campus construction and renovation standards while minimizing disruption to operations. Administration and Coordination (10%) Receives, inspects, inventories, and distributes deliveries independently to appropriate entities. Includes ordering supplies, maintaining credit card records, and securing bids as needed. Troubleshoots, escalates, and documents issues according to established policies and procedures. Includes entry and tracking of TMA work orders across UC, dining halls, and bookstore. Communicates project updates and coordinates work with UC leadership, FP&M, Housing, Dining, and other stakeholders to ensure alignment. Supervision Received: General supervision is received from the UC Facilities Services Supervisor. Supervision Exercised: Direct supervision of maintenance student work crew (4). This description attempts to indicate the kinds and levels of responsibilities given this position and shall not be construed as defining all specific duties and responsibilities of this position. It is not intended to limit or modify the right of supervisors to assign, direct, and control the work of their employees. Statements of employee duties are not intended to exclude other duties not CONDITIONS OF APPOINTMENT: University of Wisconsin-Whitewater does not offer H-1B or other work authorization visa sponsorship for this position. Candidates must be legally authorized to work in the United States at the time of hire and maintain work authorization throughout the employment term. If you have questions regarding this, please contact Human Resources. UW-Whitewater is not an e-verify employer, therefore STEM extensions are not options for work authorization. mentioned that are of similar kind or level of responsibility. Key Job Responsibilities: Utilizes specialized equipment to repair and maintain complex machinery, equipment, and facility property to prevent further damage and ensure optimal operation Receives, inspects, inventories, and distributes deliveries independently to appropriate entities Troubleshoots, escalates, and documents issues according to established policies and procedures Performs routine and non-routine facility inspections and monitors cleanliness Assists trades, crafts, vendors, and technical staff with construction, design, and operational maintenance as needed Department: The Department of University Center Building Operations Compensation: Well-qualified candidates can expect a starting annual salary commensurate with the candidate's education, related experience, and/or qualifications. UW System employees receive an excellent benefit package. To learn more about the UW System's comprehensive benefit package, review the UW System Employee Benefits Brochure. Required Qualifications: H.S. Diploma or equivalent. Must possess a valid driver's license or obtain one upon appointment. Preferred Qualifications: Commercial painting experience. Grounds equipment operation/maintenance experience. Food service equipment operation/maintenance experience. Electrical maintenance and repair experience (commercial or institutional setting preferred). Knowledge, Skills, and Abilities: Ability to demonstrate an acceptable degree of skill in the areas listed above. Ability to communicate effectively both verbally and in writing with campus stakeholders. Ability to work collaboratively with students, the general public, contractors, and UC-Whitewater staff. Ability to coordinate and collaborate with campus partners such as FP&M, Housing, and Dining to address shared maintenance needs. Ability to maintain a safe and organized work environment. Ability to climb ladders and work above head and shoulders. Ability to lift and carry 50 pounds. Solid understanding of customer service; ability to work creatively to exceed expectations. Physical ability to perform sustained rigorous activity as needed in the areas listed above. Demonstrated aptitude in business computing, competency with Microsoft Office, Google Docs, etc. Ability to interact respectfully with people with diverse socioeconomic, cultural and ethnic backgrounds Willingness and ability to be an active participant in following applicable safety rules and regulations including necessary training and drills How to Apply: Only complete application packages will be considered. This includes online submission of the following documents: Cover Letter Resume Name and contact information for three professional references Contact Information: If you have questions regarding this recruitment or if you are unable to complete the application online due to a disability or system problem, please contact us at ************** or **********. For questions regarding this position, please contact: Ben Smith, Search Committee Chair *************** ************ To Ensure Consideration: Applications received by November 27th, 2025, are ensured full consideration. Applications received after that date may be given consideration at the discretion of the search committee. The most qualified applicants will be invited to participate in the next step of the selection process. CAMPUS INFORMATION: UW-Whitewater is a thriving public university located in southeastern Wisconsin. It leads the way in providing world-class, affordable higher education programs to more students than neighboring regional comprehensives in the University of Wisconsin System. A collaborative team of 1,300 faculty and staff are devoted to the success of the university's 11,500 students at its main and Rock County campuses. The team provides high-impact practices and academic programs - online and in person - from associate to doctoral levels. Recognized nationally for affordability, inclusion, and career development, UWW serves approximately one-third first-generation students and boasts strength in many areas, especially business and education. The campus and community embrace the Warhawk Family spirit, supporting the university's arts and nationally recognized NCAA Division-III level championship athletics. As a proud institution of access, more than 10 percent of undergraduate students use the acclaimed Center for Students with Disabilities - a priority mission since the 1970s. UW-Whitewater's campuses are located centrally near Milwaukee, Madison, and Chicago, offering easy access to the cultural and commercial opportunities of major metropolitan areas. Near both Lake Geneva and the Wisconsin Dells, the area attracts numerous visitors from across the country. Whitewater is a vibrant college community near the Kettle Moraine State Forest offering area residents seasonal outdoor enjoyment. The nearby Rock County campus is located in Janesville, a town of 60,000 located on the Rock River and known as Wisconsin's Park Place. ORGANIZATION INFORMATION: The University of Wisconsin-Whitewater is part of the 13-campus Universities of Wisconsin (*************************** Wisconsin Statute 19.36(7)(b) provides that applicants may indicate in writing that their identity should be kept confidential. In response to a public records request, the University will not reveal the identities of applicants who request confidentiality in writing, except that the identity of the successful final candidate will be released. See Wisconsin Statute 19.36(7)(a). Per Regent Policy Document 20-19, University of Wisconsin System Criminal Background Check Policy and Universities of Wisconsin Administrative Policy 1275 Recruitment Policies, UW-Whitewater requires criminal background checks as a contingency to employment. A criminal background check will be conducted prior to an offer of employment. All final candidates must be asked, prior to hire, whether they have been found to have engaged in, are currently under investigation for, or left employment during an active investigation in which they were accused of sexual violence or sexual harassment. When obtaining employment reference checks, these same sexual violence or sexual harassment questions must also be asked. The University of Wisconsin-Whitewater requires that all employees be active participants in following applicable safety rules and regulations including necessary training and drills. For UW-Whitewater Campus safety information and crime statistics/annual Security Report, see Annual Security and Fire Safety Report if you would like a paper copy of the report please contact the UW-Whitewater Police at ************. UW IS AN EQUAL OPPORTUNITY EMPLOYER: Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, pregnancy, disability, status as a protected veteran, or any other bases protected by applicable federal or State law and UW System policies. We are committed to building a workforce that represents a variety of backgrounds, perspectives, and skills, and encourage all qualified individuals to apply.

Are you a dynamic, creative, and detail-oriented professional with a passion for digital innovation? Do you thrive in fast-paced environments and enjoy working on projects that make a difference for global brands? Who We Are Stamm Media (******************* partners with brands and agencies to provide stunning event technology nationwide. Within Stamm Media, we operate a digital content studio with a reputation for delivering exceptional digital solutions for big brands. We specialize in creating custom software, motion graphics, and digital experiences that drive results and elevate brands. Our team is a tight-knit group of passionate professionals who thrive on collaboration, creativity, and excellence. The Role We are looking for a Junior Creative Technologist to join our team-someone who is passionate about technology, software, and creative problem-solving. This role is ideal for a recent graduate with a background in electrical engineering, computer science, digital media, or a related field who wants to apply their skills to the world of live events and interactive experiences. As a Junior Creative Technologist, you will assist in designing and implementing interactive AV solutions, working with both hardware and software to create engaging event technology. You'll gain hands-on experience with low-code platforms, microcontrollers, AV control systems, and real-time event programming, while collaborating with our team to push the boundaries of event technology. Location: In-Office (with flexibility) at Milwaukee, WI headquarters Travel: Occasional travel to client events across the U.S. Key Responsibilities Technical Development & Integration: Assist in designing and implementing interactive AV installations and event technology. Work with low-code/no-code platforms (e.g., Intuiface, TouchDesigner…). Help integrate microcontrollers, sensors, and controls into AV production setups. Support programming and configuration of lighting, sound, and video control systems (DMX, MIDI, OSC, etc.). Hardware & Electrical Support: Assist in the setup, wiring, and testing of AV and lighting systems. Work with basic electrical circuits and power management for custom installations. Learn and support signal routing, networking, and control protocols for events. On-Site Event Support: Travel occasionally to client events across the U.S. to assist with setup, troubleshooting, and operation of interactive AV systems. Provide technical support to ensure event technology runs smoothly. Troubleshoot and resolve technical issues in high-pressure event environments. Research & Learning: Stay up to date with emerging AV technologies, interactive tools, and software trends. Participate in internal R&D projects to test and develop new AV solutions. Learn from senior team members and develop hands-on skills in AV production technology. Who You Are Recent graduate or early-career professional with a degree in Electrical Engineering, Computer Science, Digital Media, or a related field. Passionate about technology, software, and creative AV experiences. Comfortable with basic coding (Python, JavaScript, C++ preferred) and eager to learn more. Familiarity with low-code platforms, microcontrollers (Arduino, Raspberry Pi), or AV programming is a plus. Strong problem-solving skills and willingness to troubleshoot in a fast-paced environment. Willing to travel occasionally and work on-site at live events.

A Low Voltage Installation Technician is responsible for the installation, maintenance, and troubleshooting of low voltage electrical systems and equipment. They work in various settings, such as residential, commercial, and industrial environments. The technician ensures the proper functioning of low voltage systems, including security systems, fire alarms, telecommunications, audiovisual equipment, and other low voltage electrical systems. Essential Duties and Responsibilities Installation and Configuration: Install, configure, and integrate low voltage systems according to specifications and project requirements. Mount and secure equipment, such as security cameras, access control panels, intercom systems, and networking devices. Set up and configure cabling, wiring, and connections for data, voice, and video systems. Test and verify the functionality of installed systems to ensure compliance with safety standards and client expectations. Troubleshooting and Maintenance: Diagnose and troubleshoot issues with low voltage systems and equipment. Identify and resolve electrical and wiring problems, circuit failures, and equipment malfunctions. Perform regular maintenance tasks, including equipment inspections, software updates, and component replacements. Respond to service calls and provide timely resolutions to minimize system downtime. Compliance and Safety: Adhere to industry standards, building codes, and safety regulations during installations and repairs. Ensure compliance with applicable electrical codes and standards, such as the National Electrical Code (NEC). Use personal protective equipment (PPE) and follow safety protocols to minimize risks and maintain a safe working environment. Keep up-to-date with advancements in low voltage systems, technologies, and industry best practices. Customer Service and Collaboration: Interact professionally with clients, offering exceptional customer service and addressing their concerns. Collaborate with project managers, engineers, and other team members to plan and execute installations and maintenance projects. Provide guidance and training to clients or end-users on the proper operation and maintenance of low voltage systems. Communicate effectively to ensure project goals, timelines, and customer expectations are met. Skills and Qualifications High school diploma or equivalent; additional technical certifications or vocational training in low voltage systems are preferred. Solid understanding of low voltage electrical systems, wiring, and components. Knowledge of industry standards and codes, such as the National Electrical Code (NEC). Proficiency in reading and interpreting technical diagrams, schematics, and blueprints. Experience with low voltage system installations, troubleshooting, and maintenance. Familiarity with tools, equipment, and testing devices used in low voltage installations. Strong problem-solving skills and the ability to work independently or as part of a team. Excellent communication and customer service skills. Attention to detail and the ability to prioritize tasks effectively. Physical Demands and Work Environment Physical Demands: The ability to operate standard hand and power tools used in low voltage installations. Physical stamina and the ability to work in various environments, including climbing ladders, lifting heavy equipment, and working in confined spaces. Working Environment: Job Site environment We are looking for entry level to experience Communications Tech and each position in between.

This is where your work makes a difference. At Baxter, we believe every person-regardless of who they are or where they are from-deserves a chance to live a healthy life. It was our founding belief in 1931 and continues to be our guiding principle. We are redefining healthcare delivery to make a greater impact today, tomorrow, and beyond. Our Baxter colleagues are united by our Mission to Save and Sustain Lives. Together, our community is driven by a culture of courage, trust, and collaboration. Every individual is empowered to take ownership and make a meaningful impact. We strive for efficient and effective operations, and we hold each other accountable for delivering exceptional results. Here, you will find more than just a job-you will find purpose and pride. Your Role at Baxter At Baxter, we are deeply connected by our mission. No matter your role at Baxter, your work makes a positive impact on people around the world. You'll feel a sense of purpose throughout the organization, as we know our work improves outcomes for millions of patients. Baxter's products and therapies are found in almost every hospital worldwide, in clinics and in the home. For over 85 years, we have pioneered significant medical innovations that transform healthcare. Together, we create a place where we are happy, successful and inspire each other. This is where you can do your best work. Join us at the intersection of saving and sustaining lives- where your purpose accelerates our mission! Your team The field service team works within hospital and service setting environments to repair medical devices. They are trained on working with our devices, and will build off of previous mechanical or technical knowledge. This is where we apply your troubleshooting skills to medical devices and ensure our products are functioning accurately. The Field Service Technician II will demonstrate leadership by assisting with training other team members and addressing customers. What you'll be doing Performs electronic, hydraulic and pneumatic systems troubleshooting and repair of assigned products. Ability to troubleshoot devices and repair any malfunctioning components. Ability to use the appropriate tools in making required adjustments and repairs. Ability to provide on-call coverage, up to 24/7 basis including weekends and holidays, which may require customer account visits. Ability to load, unload, and remove medical products, weighing up to 1680 pounds. Generate service revenue and complete activities required under service contract. Safely operate a fleet vehicle or company car ranging in size from a cargo van up to a 26,000 pound truck. What you'll bring Equivalent experience accepted in lieu of High School Graduate or GED Must be at least 21 years of age Valid driver's license Obtain and maintain a DOT physical card required Prior technical or mechanical repair work required Applicable technical or trade school training preferred We understand compensation is an important factor as you consider the next step in your career. At Baxter, we are committed to equitable pay for all employees, and we strive to be more transparent with our pay practices. The estimated base salary for this position is $48,000 - $66,000. The estimated range is meant to reflect an anticipated salary range for the position. We may pay more or less than of the anticipated range based upon market data and other factors, all of which are subject to change. Individual pay is based on upon location, skills and expertise, experience, and other relevant factors. For questions about this, our pay philosophy, and available benefits, please speak to the recruiter if you decide to apply and are selected for an interview. Applicants must be authorized to work for any employer in the U.S. We are unable to sponsor or take over sponsorship of an employment visa at this time US Benefits at Baxter (except for Puerto Rico) This is where your well-being matters. Baxter offers comprehensive compensation and benefits packages for eligible roles. Our health and well-being benefits include medical and dental coverage that start on day one, as well as insurance coverage for basic life, accident, short-term and long-term disability, and business travel accident insurance. Financial and retirement benefits include the Employee Stock Purchase Plan (ESPP), with the ability to purchase company stock at a discount, and the 401(k) Retirement Savings Plan (RSP), with options for employee contributions and company matching. We also offer Flexible Spending Accounts, educational assistance programs, and time-off benefits such as paid holidays, paid time off ranging from 20 to 35 days based on length of service, family and medical leaves of absence, and paid parental leave. Additional benefits include commuting benefits, the Employee Discount Program, the Employee Assistance Program (EAP), and childcare benefits. Join us and enjoy the competitive compensation and benefits we offer to our employees. For additional information regarding Baxter US Benefits, please speak with your recruiter or visit our Benefits site: Benefits | Baxter Equal Employment Opportunity Baxter is an equal opportunity employer. Baxter evaluates qualified applicants without regard to race, color, religion, gender, national origin, age, sexual orientation, gender identity or expression, protected veteran status, disability/handicap status or any other legally protected characteristic. Know Your Rights: Workplace Discrimination is Illegal Reasonable Accommodations Baxter is committed to working with and providing reasonable accommodations to individuals with disabilities globally. If, because of a medical condition or disability, you need a reasonable accommodation for any part of the application or interview process, please click on the link here and let us know the nature of your request along with your contact information. Recruitment Fraud Notice Baxter has discovered incidents of employment scams, where fraudulent parties pose as Baxter employees, recruiters, or other agents, and engage with online job seekers in an attempt to steal personal and/or financial information. To learn how you can protect yourself, review our Recruitment Fraud Notice.

At ABB, we help industries outrun - leaner and cleaner. Here, progress is an expectation - for you, your team, and the world. As a global market leader, we'll give you what you need to make it happen. It won't always be easy, growing takes grit. But at ABB, you'll never run alone. Run what runs the world. This Position reports to: Drives Service Workshop Manager Your role and responsibilities In this role, you will have the opportunity to repair a variety of standard drive units and subassemblies. Each day, you will ensure the best possible and most cost-effective problem resolution. You will also showcase your expertise by executing work as per first-time right approach and ensuring the job is done on time and as per quality standards The work model for the role is: onsite #LI-Onsite This role is contributing to Motion Service in the US. You will be mainly accountable for: Review and plan daily work assignments, prioritizing customer products in for repair. Coordinate with the team Lead to ensure proper work scheduling, establishing priorities and expediting of repair orders. Process Repair work orders, both customer repair orders and production orders. Troubleshoot the repair of products, such as standard drive units, subassemblies and circuit boards; identifying and repairing the problem, performing testing and burn in activities as needed, ensuring the best possible, and most cost-effective problem resolution. Research bill of materials, Engineering Change Notice (ECN), or other documents to identify required parts for drive/component repair. Complete Material Requisitions or contact the Inventory Planner to obtain necessary parts Ensure the completion, processing and maintenance of all required paperwork, records, documentation, failure analysis reports, etc. Qualifications for the role Requires an associate degree in electronics and two years related experience; or High school diploma and four years of related electrical experience. Must be capable of passing Electrical Competency and Authorization Program (ECAP) level 3. Prior experience working with hand and power tools Knowledge of Variable Frequency Drives and the applications it supports preferred Prior experience with SAP or similar ERP system preferred #ABBCareers #RunwithABB #Runwhatrunstheworld More about us ABB is an Equal Employment Opportunity and Affirmative Action employer for protected Veterans and Individuals with Disabilities at ABB. All qualified applicants will receive consideration for employment without regard to their- sex (gender identity, gender expression, sexual orientation), marital status, citizenship, age, race and ethnicity, inclusive of traits historically associated with race or ethnicity, including but not limited to hair texture and protective hairstyles, color, religious creed, national origin, pregnancy, physical or mental disability, genetic information, protected Veteran status, or any other characteristic protected by federal and state law. For more information regarding your (EEO) rights as an applicant, please visit the following websites: ******************************************************************************************** As an Equal Employment Opportunity and Affirmative Action Employer for Protected Veterans and Individuals with Disabilities, applicants may request to review the plan of a particular ABB facility between the hours of 9:00 A.M. - 5:00 P.M. EST Monday through Friday by contacting an ABB HR Representative at **************. Protected Veterans and Individuals with Disabilities may request a reasonable accommodation if you are unable or limited in your ability to use or access ABB's career site as a result of your disability. You may request reasonable accommodations by calling an ABB HR Representative at ************** or by sending an email to ****************. Resumes and applications will not be accepted in this manner. We value people from different backgrounds. Could this be your story? Apply today or visit *********** to read more about us and learn about the impact of our solutions across the globe.

Job Description National Technologies (NTI), a Network Connex Company, is a premier turnkey installer of fiber optic and data center infrastructure. Working on our team puts you on the leading edge of innovation in the digital communications space. If being a part of a tight-knit organization that operates in some of the most advanced technology environments around the world sounds like a dream job, NTI might be the right fit for you! With the perks of a large organization, NTI remains true to its roots as a home-grown company with an open door culture that welcomes new ideas and encourages professional growth. We set you on the right path with careful onboarding and thorough training programs that prepare you for success in your role and beyond. Position Overview: NTI is seeking a Traveling Foreman with will lead a team, ensuring projects are completed safely, on time, and to customer quality standards while performing advanced fiber optic splicing and testing tasks. This role requires national travel to various project sites and combines leadership, project management, and technical expertise in fiber optic infrastructure. Key Responsibilities: Ensure project safety, quality, schedule, and cost compliance with company/client standards. Lead 2-3 crew members, optimizing skills and equipment use. Act as primary liaison between Project Manager and crew. Interpret customer prints to plan tasks and schedule work. Hold daily pre-work meetings to align on goals and safety. Verify construction and splicing work meets standards. Complete phase-specific closeout documentation. Document job progress with photos. Maintain company equipment (vehicles, trailers, test tools). Perform precise fusion and mid-sheath splicing on high-count fiber cables (864ct, 1728ct, 3456ct). Conduct live fiber splicing during maintenance windows to minimize disruptions. Install fiber optic cables in various environments (underground, aerial, indoor). Execute OTDR/OLTS testing to assess cable performance. Troubleshoot and resolve live network fiber issues. Produce FastReporter reports for test and splicing documentation. Operate Fujikura splicers and EXFO testers for low-loss splices and diagnostics. Pull fiber cables through conduits/ducts for installations. Support cabinet bolting and basket tray installation (preferred). Safely operate scissor lifts for elevated work (preferred). Comply with OSHA, IBEW Local, and NTI safety standards Maintain a clean workspace and follow proper handling procedures for fiber optic materials and equipment. Work Schedule and Environment Work indoors and outdoors in various weather conditions, adapting to project requirements. Perform tasks during daytime and occasional nighttime maintenance windows as required by client schedules. Stand for extended periods (8-10 hours per day) and perform physically demanding tasks, including lifting and carrying up to 50 pounds. xperience and Education 5+ years of experience in the telecommunications industry with related experience in construction and tower work. 2-3 years of verifiable experience splicing and testing fiber optic cables for dark fiber providers (e.g., Zayo), meeting stringent quality and performance standards. 3+ years of hands-on experience using Fujikura fusion splicing machines for high-count fiber splicing (864ct, 1728ct, 3456ct). 3+ years of experience performing OTDR and OLTS testing with EXFO testing equipment. 2+ years of experience producing FastReporter reports for network documentation. Qualifications & Skills Proven ability to perform mid-sheath (ring-cut) splicing and live fiber network splicing with minimal service disruption. Strong troubleshooting skills for diagnosing and resolving issues on live/active network fiber. Familiarity with cable pulling, cabinet bolting, basket tray installation, and scissor lift operation (preferred). Strong written and oral communication skills for effective team and client interactions. Proficiency in Microsoft Office (Excel, Word, Outlook) for documentation and reporting. Strong interpersonal skills and a strong work ethic. Ability to pass a clean background check and drug screen. Valid driver's license required. Fluency in English for effective communication. Certification in fiber optic splicing or testing (e.g., FOA CFOT, BICSI, or equivalent) preferred. Prior experience with major telecommunications carriers or dark fiber providers beyond Zayo preferred. Familiarity with additional fiber optic testing tools or software beyond EXFO and FastReporter preferred. Union Affiliation: This is a union position under IBEW Local requiring adherence to union agreements, policies, and benefits structures. Benefits: Competitive union wages and benefits package through IBEW Local 640, including health insurance, retirement plans, and paid time off. Opportunities for professional development and training in advanced fiber optic technologies. Access to a supportive union environment with representation and advocacy. Collaborative and safety-focused work culture at NTI. Pay rates may vary based on skills, background, experience and specific location. NTI provides a comprehensive benefits package including health, dental, vision, life, and disability insurance and retirement savings options. For Union employees, pay rates and benefit levels are determined by union classifications which are set by the union. National Technologies (NTI) believes all persons are entitled to equal employment opportunities and does not discriminate against employees or job applicants because of race, color, gender, affectional or sexual orientation, domestic partnership status, ancestry, religion, national origin, citizenship status, marital status, disability, veteran status, age or any other protected group status. Upon acceptance of an offer, all candidates will be required to pass a background check and drug screening.

Who We Are Lad Lake is a COA-accredited, nonprofit, independent organization serving kids and families from across the state. We work with 1,200+ youths and their families through evidence-based, trauma-informed programs at three Southeastern Wisconsin campuses. Our mission is to guide growth, and diversity, equity, and inclusion are at the center of everything we do. We're looking for a hands-on, reliable Facilities Technician to help us maintain safe, functional, and welcoming spaces for the youth and staff who call our campuses home. If you love problem-solving, take pride in a job well done, and are open to growing your career, we'd love to meet you. What a day in the life of a Facilities Technician looks like: Take on general maintenance tasks-painting, plumbing, repairs, and more Serve as the go-to problem-solver for your assigned buildings Identify safety hazards and address them quickly Operate and maintain equipment used in day-to-day upkeep Drive between campuses and to local vendors as needed Support and supervise youth workers, keeping their treatment plans in mind Help during emergencies and stay flexible with the needs of the day Keep lines of communication open with your supervisor and team Be a calm, respectful role model-our youth are always watching Rotate on-call availability every other weekend What you bring to the table: Availability Mon-Fri 7:00 AM-3:30 PM, and on-call every other weekend High school diploma or equivalent At least 21 years old with a valid driver's license and good driving record Working knowledge of building maintenance, basic plumbing, carpentry, and painting Familiarity with tools, small engines, and equipment safety Comfort using computers and documenting work Previous maintenance, and/or leadership experience strongly preferred A team-first attitude, willingness to learn, and ability to lift up to 50 lbs What we bring to the table (FT): Medical, Dental, Life Insurance, STD, LTD Benefits. Paid Time Off (up to 16 days annually to start). Holiday pay (up to 8 days). Tuition reimbursement. 401k plan + profit sharing for your future. Free meals when you're hanging out with the youth Casual dress code - wear what makes you comfortable! Personal and professional development opportunities (we'll pay you to learn!). Employee Assistance Program (EAP) for additional support. Federal Student Loan Forgiveness Employer. Longevity - We're Wisconsin's oldest youth service organization! Advancement opportunities - Many of our leaders started in entry-level roles and grew into management positions. A servant-leadership culture - Our leaders are here to support you so you can best serve our youth. Come join the Lad Lake family. Welcome Home! The base pay actually offered will take into account internal equity and also may vary depending on the candidate's education, job-related knowledge, skills, and experience among other factors.

Lifeway Foods (NASDAQ: LWAY), which has been recognized as one of Forbes' Best Small Companies, is America's leading supplier of the probiotic beverage known as Kefir. In addition to its line of drinkable Kefir, the company also produces cheese, drinkable yogurt, and a ProBugs line of Kefir for kids. Lifeway's tart and tangy fermented dairy products are sold across the United States, Mexico, Ireland, and the United Kingdom. Summary The Facilities Technician III thrives on problem-solving and finding the right technical solution in a fast-paced food manufacturing environment. They are responsible for the service, repair, and preventative maintenance of the ammonia refrigeration system, boilers, wastewater, compressed air, HVAC, and general facility maintenance, including docks, doors, roofs, and more. Participate in the Process Safety Management (PSM) program and develop and maintain the ammonia system - daily communication with the Maintenance Supervisor to improve plant reliability. Essential Job Duties and Responsibilities * Operate, monitor, service, and repair equipment for steam, refrigeration, water, compressed air, and HVAC systems * Make rounds and keep logs of daily operations and events for multiple engine rooms and refrigeration equipment * Maintenance and troubleshooting of ammonia refrigeration compressors, condensers, pumps, vessels/recirculatory, purges, evaporators / MAUs, heat exchangers, and control valves/isolation valves while using the Original Equipment Manufacturer's guidelines * Maintenance and troubleshooting of steam boilers, wastewater treatment facility, water heaters, HVAC systems and air compressors * Participate in the PSM Program * Promote Safe working habits * Log time and material usage into CMMS for PMs and corrective maintenance * Responsible for housekeeping of engine rooms, vessel areas, shops, and all other work areas * Maintain all docks, doors, and roofs * Responsible for upkeep of building, including windows, walls, grouting, painting, and more * Work with contractors to help maintain or repair equipment when needed * Perform duties according to Standard Operating Procedures (SOP) and Sanitization Standard Operating Procedures (SSOP) that meet quality and safety standards pertaining to: Hazard Analysis & Critical Control Points (HACCP), Food and Drug Administration (FDA), Environmental Protection Agency (EPA), Occupational Safety and Health Administration (OSHA), United States Department of Agriculture (USDA), Wisconsin Department of Agriculture (WDA), and customer requirements * Report to workstation on time; Wear proper work attire; Assist in setting up work area * Conduct behavior in compliance with Lifeway Employee Policy * Perform additional duties as assigned Qualification and Education Requirements * Demonstrates mechanical abilities * Background that includes, but is not limited to, boilers, air compressor equipment, understanding of plant utilities systems, equipment installation, and startups * Minimum of 3 to 5 years of experience in Ammonia Refrigeration * Ability to read and interpret blueprints, manuals, and P&ID's * PSM experience * Ability to align machinery within specified tolerances to satisfactory level * Ability to establish and maintain effective working relationships with co-workers at all levels * Ability to train co-workers * Experience working with vendors and contractors * Self-motivated * RETA certification CIRO (Certified Industrial Refrigeration Operator) is completed within 3 years of employment * Knowledge of Manufacturing Software, Inventory Software, and Microsoft Office, including Excel and Outlook * Must be able to lift 50 lbs.; Ability to be on your feet for entirety of 8-hour shift; Ability to climb ladders and maneuver through equipment; Reasonable accommodations may be made to enable individuals with disabilities Lifeway Foods, Inc is a growing Chicago-based beverage manufacturer with over 25 years of experience. We are an industry leader in the production of high-quality Kefir. We are an equal-opportunity employer and offer a competitive benefits package. Visit us at ********************* 8am to 4pm, Monday - Friday Periodic, scheduled, on-call hours.

Dürr CTS (Clean Technology Systems) develops advanced environmental technologies to make industrial production cleaner, safer, and more efficient. Across all our product lines, Dürr CTS offers responsive, local, and skilled service teams, delivering customer-focused support in maintenance, troubleshooting, spare parts, and plant modifications. Since November 1st, 2025, Dürr CTS has operated independently, with 1,300 employees across 12 countries. We provide reliable and innovative environmental technology solutions, helping customers worldwide meet their regulatory and sustainability goals. Our Portfolio Includes: Air Pollution Control: thermal oxidation, sorptive processes, particulate matter separation Noise Abatement: Silencer products, filtration, gas turbine inlet and exhaust systems by Dürr Universal Decentral Power Generation: Organic Rankine Cycle systems with Cyplan ORC We serve a wide range of industries, including chemical, pharmaceutical, food, automotive, energy, surface coating, and many more, providing tailored solutions that help customers meet environmental regulations, reduce emissions, ensure operational reliability, and improve sustainability. We're Looking for People Who: Can be the face of our company to our customers Love to travel and experience new work environments Enjoy navigating challenges that require you to think on your feet Have a high mechanical aptitude Crave personal development and improvement What We Do: Durr Universal provides noise and environmental solutions to our customers. For more than 65 years, we have supported our customers through our design, manufacturing, and installation of acoustic and emissions systems. We work to continually improve our knowledge of our equipment, our customers' processes, and how the two interact. Why We're in Business: Durr Universal provides value-added solutions to our customers. We pride ourselves on the thoroughness of our pre-sale consultation and solution development, the quality and longevity of our equipment, and our best-in-class service from initial customer inquiry through the life of the equipment. We seek long-term partnerships with customers that value our approach. This position will oversee all activities of both Durr Universal internal and Field Service contractors and report on the performance of the department functions with appropriate personnel in the company. This position will require working with the Field Service Technicians, Project Managers, Sales, Engineering, 3rd party Contractors, and site customers to ensure overall contract requirements are successfully met for field service work, warranty repair, quality inspection, and technical supervision. This position requires travel from 70% to 90% to various potential customer sites to assist in quoting, supervision, auditing, inspection, etc. of dedicated Field Service Teams, along with assisting and overseeing field service project work scopes and related scopes. The Field Service Supervisor/TFA must plan, organize, direct, and manage the work of individual field service technicians and contractors in various field operations. Essential Functions: Put safety first in everything you do and help ensure our colleagues, customers, and business partners remain safe at all times. Be the liaison between the customer, contractor, and Dürr staff Assist in the installation of Dürr and other equipment Manage all 3rd party subcontractors, ensure work is done safely, properly, and on time and in budget. Work with site personnel and internal personnel on project issues and resolve them effectively. Develop cost estimates and customer proposals for field installation projects. Creation and deployment of mobilization schedules for the field service department. Assist in equipment commissioning and documentation as required Participate in contract reviews and kick-off meetings involving the field service scope of work. Assist with parts procurement as needed When required provide customer training on installed equipment Provide equipment modular build support as required Experience and Skills: Must make safety a priority every day AWS Certified Welding Inspector (CWI) is a plus Painting and coatings certification/ experience is a plus OSHA 10 or 30 Hour Safety Trained Familiar with MS Word, Excel, and PowerPoint Desire to travel Ability to read and interpret engineering drawings and technical documents (i.e. layout, sectional drawings) Excellent written and verbal communication skills Desire to work hands-on in an industrial environment Proven mechanical aptitude - including the use of various machining tools, welding equipment and methods, and various testing equipment Demonstrated experience with installation and inspection of large steel structures (ducting and tall stacks, steel platforms) and their welding processes, inspection of welds, and industrial coatings Working experience with safe lifting & rigging methods Fully capable with Microsoft Office software package Flexible to adapt to same-day and next-day changes Ideal candidate will have experience developing RFQ/RFPs for work that would be subcontracted to 3rd party vendors. Experience with steel fabrication and custom equipment manufacturing. Position can be located anywhere near a major airport Dürr CTS, Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. We maintain a drug-free workplace and perform pre-employment drug and alcohol testing. Note to all Staffing Agencies: Dürr CTS, Inc. has a team of dedicated Human Resources professionals who are responsible for all hiring needs. Our practice is to partner and work with our approved vendors on an as-needed basis. We do not accept resumes from agencies that are not on our preferred vendor list and have not signed our Recruiting and Permanent Placement Contract. Any resumes submitted from unapproved vendors will be considered unsolicited, and Dürr will not be obligated to pay a referral fee.

A leader in the technology world is looking for multiple Sr Datacenter Engineers to help with cabling projects in the Milwaukee area. In this role you will be working in a team environment to help build out new and existing datacenters on a project basis. The right candidate will have at least a year of experience working in a datacenter and be familiar with various types of hardware and network devices. You will be responsible for cable labeling, installation/patching and management. This position offers the chance to work for one of the most elite names in the Technology space with the potential for a full-time opportunity. The following experience will ensure you are a good match: 1+ year working in a Datacenter Experience labeling, managing and cabling network devices Ability to work on your own with Management direction