Telecom technician jobs in Laguna Hills, CA - 1,641 jobs

Job Title: Precision AG System Technician Assignment Length: 09 Months + (Possible Extension) Contract/ Contingent Pay Rate: Hourly on w2 All Inclusive on SGS Payroll (Doesn't Include PTO/Holiday Pay) Key Responsibilities: • Travel - Up to 90% field-based, including travel to Riverdale, CA and Irvine, CA • Serve as the primary liaison with UC ANR South Coast Farm to coordinate all StarFire GNSS test activities. • Collaborate with engineering teams across ISG-T and client to align test operations at the Irvine site. • Train and support UC ANR staff on client Precision Ag technologies, when needed. • Oversee maintenance and readiness of equipment; coordinate repairs with local dealers as needed. • Manage on-site storage and upkeep of test equipment and vehicles. • Build and maintain strong working relationships with the farm management team. • Travel to Riverdale, CA to conduct additional testing and support TDP validation in orchard environments. • Execute software verification and validation for StarFire GNSS receivers. • Develop and apply knowledge of GPS fundamentals through hands-on assignments and training. • Perform field testing, including equipment setup, data logging/export, and analysis. • Operate and test agricultural machinery in experimental field environments. • Work independently and collaboratively with engineers to validate GNSS receiver performance. Qualifications: Required: • Bachelor's degree in mechanical engineering, Agricultural Systems Technology, Agricultural Engineering, or a related field. • 1+ years of experience operating precision agriculture equipment. • Familiarity with client's machinery. • Experience in system validation, verification testing, and regression testing. • Strong analytical, communication, and reporting skills. • Hands-on experience with equipment setup and infrastructure installation. Preferred: • In-depth knowledge of Precision Ag systems. • Experience testing GNSS receivers. • Familiarity with CAN bus communication protocols. • Strong troubleshooting skills for hardware-related issues.

Technica, USA (***************** is a leading supplier of advanced equipment solutions for the printed circuit board (PCB) and printed circuit board assembly (PCBA) industries. We are committed to delivering high-quality technology and exceptional customer support to manufacturers across the U.S. Position Overview Technica is seeking a highly motivated Equipment Field Service Technician to install, service, and support capital equipment used in PCB and PCBA manufacturing environments. This role is responsible for equipment installation, preventive maintenance, troubleshooting, repairs, and rebuilds at customer sites. The ideal candidate is hands-on, self-directed, customer-focused, and operates with the highest level of integrity and professionalism. Key Responsibilities Install, commission, and service capital equipment at customer facilities Diagnose and troubleshoot mechanical, electrical, and control system issues Perform preventive maintenance, repairs, and equipment rebuilds Conduct equipment audits and performance evaluations Provide on-site technical support to resolve customer production challenges Document service activities and generate detailed service reports Maintain strong customer relationships through effective communication and responsive service Qualifications Minimum of 2 years of experience in a PCB or PCBA manufacturing environment, or related industry Valid U.S. driver's license legally authorized to work in the United States Stable work history with verifiable positive references Required Skills & Abilities Willingness to travel domestically more than 50% of the time, often on short notice Strong work ethic with a positive, solution-oriented “whatever it takes” attitude Self-motivated and capable of working independently with minimal supervision Strong commitment to customer satisfaction and service excellence Excellent communication and interpersonal skills Ability to leverage all available resources to diagnose and resolve technical issues Proficiency with computers, including the ability to create detailed service and equipment Ability to read and interpret electrical schematics Experience troubleshooting and maintaining PLC-controlled equipment Comfortable working around industrial equipment, chemicals, and environmental conditions typical of PCB and PCBA manufacturing facilities Preferred Qualifications Prior experience servicing Wise equipment

At Advanced Accelerator Applications, a Novartis company, we are committed to leading innovation in nuclear medicine and delivering the next generation of targeted radioligand therapy to cancer patients. We are looking for experienced Manufacturing professionals to help us reach our ambitious goals. The Engineering & Maintenance Technician I/II is responsible for performing corrective and preventative maintenance and support services for the building(s) and all equipment for a GMP Radioligand Therapies Production Facility. Responsible for reliable, efficient, and sustained operation of the facility and all equipment. Additionally supports current project operations and site goal objectives and ensures compliance with regulatory, corporate, and site requirements related to their functional area. Location: Onsite The working shift will be adjusted (1st or 2nd) after initial onboarding and training completion. Job Description Major accountabilities: * Adhere to Novartis Quality Policies and procedures as they pertain to the position to ensure that all products are safe, pure, effective and of the highest quality. * Perform a wide range of maintenance repair activities on production equipment, lab equipment and building management systems. * Assist in troubleshooting and repair of process equipment (example: containment isolator systems, filling line equipment and associated utility connections) which may include mechanical, electrical wiring, pneumatics, motors, pumps, vacuum systems, HVAC, control systems, compressed gases, filling line, under little to no supervision. * Interpret P&IDs, equipment/system layouts, wiring diagrams, and specifications in planning and performing maintenance and repairs. * Support 24x7 site-based operations after startup. * Write/revise accurate operational procedures, training documents and maintenance procedures for various production and utility systems. * Provide radiation safety program support, responsible for calibration and functionality of all radiation detection equipment * Completes Equipment Work Order Thoroughly, and Accurately and Documents them in the System * Supply information and technical data for securing spare parts. * Provide responsive customer support with emphasis on customer satisfaction. * Perform startup and commissioning activities as required. * Support and/or perform investigations / deviations from an engineering/maintenance perspective and help with data for timely closure of deviations and CAPAs * Perform preventative and corrective maintenance on manufacturing process related equipment within a cleanroom environment. * Complete and provide accurate documentation, as required in cGMP operations. * Oversee work and provide training of less experienced maintenance technicians and/or new technicians. * Other related duties as assigned. * Use of CMMS system for documentation of relevant work. The salary for this position is expected to range between $22.84 and $42.45 per hour for the Engineering & Maintenance Technician I and is expected to range between $30.58 and $56.82 per hour for the Engineering & Maintenance Technician II. The final salary offered is determined based on factors like, but not limited to, relevant skills and experience, and upon joining Novartis will be reviewed periodically. Novartis may change the published salary range based on company and market factors. Your compensation will include a performance-based cash incentive and, depending on the level of the role, eligibility to be considered for annual equity awards. US-based eligible employees will receive a comprehensive benefits package that includes health, life and disability benefits, a 401(k) with company contribution and match, and a variety of other benefits. In addition, employees are eligible for a generous time off package including vacation, personal days, holidays and other leaves. Minimum Requirements: Engineering & Maintenance Technician I * High School diploma or equivalent is required; Bachelor's Degree is preferred. * 1+ years of relevant hands-on plant maintenance experience in a regulated GMP environment is required. * Previous aseptic fill/finish and/or radio pharmacy experience is preferred. * Previous pharmaceutical or medical device experience is preferred. * Completed training in radioactive or hazardous materials environment is preferred. * Must be able to adhere to all applicable procedures, company policies and any other quality or regulatory requirements. (For example: OSHA, DEA, FDA, EMEA, ANVISA, HS&E, etc.) * Experience working in a team environment, with excellent communication and organizational skills. * Proficient computer skill utilizing MS Office suite applications, Building Management Systems, and Computerized Maintenance Management Systems (CMMS) or similar system. * Ability to climb ladders and lift up to 50 lbs. * Wear and work in protective clothing, including respiratory protection, confined space entry and clean room environments. * Must be flexible to work nights, weekends, and holidays as required. This will be a shift-based position. Engineering & Maintenance Technician II * High School diploma or equivalent is required; Bachelor's Degree is preferred. * 2+ years of relevant hands-on plant maintenance experience in a regulated GMP environment is required. * Previous pharmaceutical or medical device experience is required. * Previous aseptic fill/finish and/or radio pharmacy experience is highly preferred. * Completed training in radioactive or hazardous materials environment is highly preferred. * Must be able to adhere to all applicable procedures, company policies and any other quality or regulatory requirements. (For example: OSHA, DEA, FDA, EMEA, ANVISA, HS&E, etc.) * Experience working in a team environment, with excellent communication and organizational skills. * Proficient computer skill utilizing MS Office suite applications, Building Management Systems, and Computerized Maintenance Management Systems (CMMS) or similar system. * Ability to climb ladders and lift up to 50 lbs. * Wear and work in protective clothing, including respiratory protection, confined space entry and clean room environments. * Must be flexible to work nights, weekends, and holidays as required. This will be a shift-based position. EEO Statement: The Novartis Group of Companies are Equal Opportunity Employers. We do not discriminate in recruitment, hiring, training, promotion or other employment practices for reasons of race, color, religion, sex, national origin, age, sexual orientation, gender identity or expression, marital or veteran status, disability, or any other legally protected status. Accessibility and reasonable accommodations The Novartis Group of Companies are committed to working with and providing reasonable accommodation to individuals with disabilities. If, because of a medical condition or disability, you need a reasonable accommodation for any part of the application process, or to perform the essential functions of a position, please send an e-mail to or call and let us know the nature of your request and your contact information. Please include the job requisition number in your message. Salary Range $70,000.00 - $130,000.00 Skills Desired 5S Methodology, Assembly Language, Computer Data Storage, Control System, Electronic Components, Equipment Maintenance, General Hse Knowledge , Installations (Computer Programs), Iso (International Organization For Standardization), Knowledge Of Gmp Including Gdp, Life Insurance, Manufacturing Production, Physics, Sap Erp, Scheduler, Software Troubleshooting, Statistical Process Control (SPC), Total Productive Maintenance

City Culver City, Santa Monica, West Los Angeles State/Province California Country United States Department TECHNICAL_SERVICE_ENGINEERING Date Monday, January 5, 2026 Working time Full-time Ref# 20036820 Job Level Individual Contributor Job Type Experienced Job Field TECHNICAL_SERVICE_ENGINEERING Seniority Level Entry Level Currency USD - United States - US Annual Base Salary Minimum 28,680 Annual Base Salary Maximum 57,360

Looking for a structured Cable Technician for multiple cabling projects for the new hospital building. Hospital existing building, pull cable, install cable, terminate and test cable, CAT 6/CAT 6A, bix blocks, fire stopping. Knowledge of code important, they get inspected frequently. IDF build and cable pathway installations Multiple cabling projects for the newly built hospital *Skills* Cable, Technician, Cat6, Cable puller, Punchdown, Structured cabling *Top Skills Details* Cable,Technician *Additional Skills & Qualifications* Excellent Customer Service work well in team environment *Experience Level* Entry Level *Job Type & Location*This is a Contract position based out of San Bernardino, CA. *Pay and Benefits*The pay range for this position is $25.00 - $26.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: * Medical, dental & vision * Critical Illness, Accident, and Hospital * 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available * Life Insurance (Voluntary Life & AD&D for the employee and dependents) * Short and long-term disability * Health Spending Account (HSA) * Transportation benefits * Employee Assistance Program * Time Off/Leave (PTO, Vacation or Sick Leave) *Workplace Type*This is a fully onsite position in San Bernardino,CA. *Application Deadline*This position is anticipated to close on Jan 22, 2026. h4>About TEKsystems: We're partners in transformation. We help clients activate ideas and solutions to take advantage of a new world of opportunity. We are a team of 80,000 strong, working with over 6,000 clients, including 80% of the Fortune 500, across North America, Europe and Asia. As an industry leader in Full-Stack Technology Services, Talent Services, and real-world application, we work with progressive leaders to drive change. That's the power of true partnership. TEKsystems is an Allegis Group company. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. About TEKsystems and TEKsystems Global Services We're a leading provider of business and technology services. We accelerate business transformation for our customers. Our expertise in strategy, design, execution and operations unlocks business value through a range of solutions. We're a team of 80,000 strong, working with over 6,000 customers, including 80% of the Fortune 500 across North America, Europe and Asia, who partner with us for our scale, full-stack capabilities and speed. We're strategic thinkers, hands-on collaborators, helping customers capitalize on change and master the momentum of technology. We're building tomorrow by delivering business outcomes and making positive impacts in our global communities. TEKsystems and TEKsystems Global Services are Allegis Group companies. Learn more at TEKsystems.com. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Up to $20,000 Sign-On bonus based on experience San Ramon Regional Medical Center began serving residents of the San Ramon Valley and its surrounding communities in 1990. Located on a hillside overlooking the valley, we are a 123-bed, acute-care hospital, primary stroke center, and a"cardiac heart surgery hospital. San Ramon Regional Medical Center provides comprehensive inpatient and outpatient services."Personalized service and a patient-centered philosophy are distinctive qualities of our facility. We offer competitive salaries and benefitsincluding a matching 401(k), several health & dental plans to choose from, generous tuition assistance plans, and relocation assistance for select positions. Comprehensive benefits for medical, prescription drug, dental, vision, behavioral health and telemedicine services Wellbeing support, including employee assistance program (EAP) Time away from work programs for paid time off, long- and short-term plan coverage Savings and retirement including a 401(k) Plan with a 50% match up to 6% of pay, employee stock purchase plan, flexible spending accounts, retirement readiness tools, rollover support, and financial well-being counseling Education support through tuition assistance, student loan assistance, certification support, and online educational program Additional benefits life insurance, supplemental health protection plans, auto and home insurance, legal counseling, identity theft protection, and employee discount program Registered nurses - Retirement medical benefit account (RMBA) - 2% of annual eligible income set aside in accordance with program guidelines Benefits may vary by location and role Position Summary: As a senior member of the Diagnostic Imaging Department, this position produces clinical diagnostic radiographic images. Operates diagnostic imaging equipment, prepares room, equipment, supplies and medications. Provides leadership to Rad Tech II technologists or other staff as is needed. Provides patient care services using general and specialized imaging modalities under the direction of a physician but not requiring constant technical supervision. Provides diagnostic imaging services to patients of all ages. Applies ionizing radiation in the performance of a variety of technical procedures for radiological diagnosis. Responsible for patient care safety. Assists physicians in the performance of interventional procedures and the administration of contrast media. Assumes responsibility for designated procedures and equipment. Participates in orientation of Radiology Department staff. Works cooperatively with members of the health care team to maintain standards for professional Diagnostic Imaging Technologist practice in the clinical setting. Sign-on bonus doesn't apply to internal applicants Who We Are We are a community built on care. Our caregivers and supporting staff extend compassion to those in need, helping to improve the health and well-being of those we serve, and provide comfort and healing. Your community is our community. Our Story We started out as a small operation in California. In May 1969, we acquired four hospitals, some additional care facilities and real estate for the future development of hospitals. Over the years, we've grown tremendously in size, scope and capability, building a home in new markets over time, and curating those homes to provide a compassionate environment for those entrusting us with their care. We have a rich history at Tenet. There are so many stories of compassionate care; so many "firsts" in terms of medical innovation; so many examples of enhancing healthcare delivery and shaping a business that is truly centered around patients and community need. Tenet and our predecessors have enabled us to touch many different elements of healthcare and make a difference in the lives of others. Our Impact Today Today, we are leading health system and services platform that continues to evolve in lockstep with community need. Tenet's operations include three businesses - our hospitals and physicians, USPI and Conifer Health Solutions. Our impact spreads far and deep with 65 hospitals and approximately 510 outpatient centers and additional sites of care. We are differentiated by our top notch medical specialists and service lines that are tailored within each community we serve. The work Conifer is doing will help provide the foundation for better health for clients across the country, through the delivery of healthcare-focused revenue cycle management and value-based care solutions. Together as an enterprise, we work to save lives and can accept nothing less than excellence from ourselves in service of our patients and their families, every day. Careers at Tenet At Tenet Healthcare, the heart of what we do centers on caring with compassion, which ultimately creates a bond between our caregivers and patients. Everyone contributes to these moments, whether providing care directly or supporting those who do. As an organization, we provide employees with resources, tools and support to serve our patients and customers in the best way possible. We also take care of one another, helping team members further develop their career pathways and maximize their potential. Minimum Education: Graduate of an accredited radiology program Minimum Experience/Skills: Up to 1 year experience Licenses/Certificates/Credentials: Must possess and maintain throughout the duration of employment: Current Basic Life Support (BLS) certification for Healthcare Provider issued by the American Heart Association Current Certified Radiologic Technologist (CRT) license issued by the California Department of Public Health Current certification and registration with the American Registry of Radiologic Technologists (ARRT) Current Fluoroscopy Permit issued by the California Department of Public Health (or within 6 months of hire/ transfer) Venipuncture certification required, if applicable #LI-KB6 Tenet complies with federal, state, and/or local laws regarding mandatory vaccination of its workforce. If you are offered this position and must be vaccinated under any applicable law, you will be required to show proof of full vaccination or obtain an approval of a religious or medical exemption prior to your start date. If you receive an exemption from the vaccination requirement, you will be required to submit to regular testing in accordance with the law.

Pinnacle Live is a premium, in-house AV partner. We elevate live event expectations for people and venues who demand better. With an expert balance of big-picture problem-solving and boots-on-the-ground execution, we deliver bespoke AV solutions for in-person, virtual, and hybrid meetings and live events. The most impressive, impactful meeting and events all have the same common denominator: dedicated, determined people working behind-the-scenes to make it happen. We're looking for those people. Pinnacle Live is a Collaborative Crusader. We empower you to tackle tough challengestodeliver unforgettable hospitality and live event experiences. Job Summary The Rigging Services Technician is responsible for the successful execution of all rigging elements and ensuring compliance with Company and PLASA standards. The Rigging Services Technician is charged with delivering unmatched customer service and providing unmatched client satisfaction. Essential Functions Ensure all event and rigging elements are executed according to Company standards Assist with the rigging of overhead stage equipment including lighting, sound, automation, scenery and props, as needed Comply with all Company security and safety protocols Company will all Company policies and procedures Inspect all rigging and audio visual equipment; notify Supervisor immediately if damage or unsafe situation exists Ensure any lost, stolen or damaged equipment is immediately reported to Supervisor. Look for opportunities to enhance client's event experience Provide continued communication with Management to ensure success of all events. Follow through on all client requests Ensure all Company occupied areas as clean, organized and up to Company standards Other duties as assigned. Education & Experience High School Graduate or equivalent Minimum three (3) years' production/theatrical rigging experience Prior exposure to audio visual and/or hospitality industry ETCP certification and/or Aerial Work Platform Certification preferred Required Skills & Knowledge To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed herein are representative of the knowledge, skill, and/or ability required. Strong technical aptitude, including the use of rigging equipment and electric motors Planning ability; able to plan prioritize Adaptability; able to adapt effectively to change Strong interpersonal skills Excellent verbal and written communication skills Excellent organizational skills and attention to detail Strong team player orientation Commitment to best-in-class customer service for internal and external stakeholders Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to: Sit at a desk Stand or walk for long periods, including up and down stairs Consistently bend and stoop Use hands to hold, handle, or feel Reach with hands and arms Talk, hear and communicate. Lift up to 75 - 100 pounds Pinnacle Live is an E-verify and Equal Employment Opportunity Employer Pinnacle Live is committed to welcoming, valuing, and supporting every person and their unique contributions. We are actively working to foster an environment where diversity, equity, inclusion, belonging, and mutual respect thrive. We recognize that diversity is intersectional, and that actively valuing diversity demands that we continually strive to establish a welcoming atmosphere for all. Pinnacle Live welcomes, openly acknowledges, empowers, and celebrates the diversity of all our team members, clients, and partners, and affirms the identities and experiences of all our members. We strive to create an environment where we actively embrace all forms of diversity. #LI-DNI

TAK Broadband is a leading end-to-end U.S. fiber broadband network construction contractor operating in 42 states. It builds more than just networks; it connects communities to new valuable digital opportunities. TAK offers comprehensive service solutions, from construction to drops to fulfillment. TAK's ecosystem of partners allows it to successfully complete every project starting from the first point of conception. This includes engineering teams, distributors, and more than 100 qualified construction crews with extensive experience across all ISP types and markets; over 300 experienced bury drop crews; and more than 700 professional technicians. We are seeking a skilled and safety-focused **Wireless Technician** to join our team in **Inland Empire, CA** . In this role, you will support the installation, maintenance, and repair of wireless communication systems across the Southern California region. The ideal candidate has hands-on experience with cell site buildouts, antenna system integration, and troubleshooting RF and backhaul issues. This role plays a critical part in ensuring the reliability and performance of our wireless infrastructure. **Why TAK?** + Full Time + Paid Bi-Weekly + **Compensation: $22 - $24 per hour, DOE** + Full Benefits Package (Medical, Dental & Vision) + Paid Time Off + 401(k) with Company Match! + 25K Company Paid Life Insurance + Independent Work & Team Collaboration + Career Development & Advancement Opportunities! **The Role** + Install, maintain, and upgrade wireless network equipment, including antennas, radios, coax, fiber, and supporting hardware + Conduct tower climbing and work at heights to install or service cell site components + Perform site surveys, testing, commissioning, and troubleshooting of wireless systems + Terminate and test fiber and coaxial cables + Interpret RF diagrams, site drawings, and construction documents + Ensure compliance with safety procedures, industry standards, and local regulations + Maintain accurate documentation and reporting for each project or service call + Operate company-provided tools, vehicles, and equipment responsibly + Collaborate with field supervisors, project managers, and other crew members to meet project deadlines Requirements + 1-3+ years of experience in wireless construction or telecommunications fieldwork (tower work, DAS, small cells, LTE/5G installs, etc.) + Understanding of RF principles, microwave systems, and IP networking basics is preferred + Ability to read blueprints, construction drawings, and RF schematics + Proficient with basic hand tools, power tools, and test equipment (PIM/Sweep testing, fiber testers, etc.) + OSHA 10/30, RF Awareness, and Climbing Certification strongly preferred (or willing to obtain upon hire) + Ability to lift 50+ lbs and work outdoors in various weather conditions + Experience working with major carriers (AT&T, Verizon, T-Mobile, Dish, etc.) a plus + Familiarity with Ericsson, Nokia, or Samsung equipment a plus + Experience with C-RAN, small cell deployments, or fiber backhaul preferred + Must provide a valid government-issued photo ID for verification; a driver's license is required if the role involves driving + Passing of all pre-employment requirements (MVR, Background Check, Drug Screen) _The compensation and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, with or without notice, subject to applicable law._ _TAK is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetic information, protected veteran status, or any other characteristic protected by law. We maintain full compliance with the Americans with Disabilities Act and are committed to providing equal access throughout our employment practices. Individuals with disabilities may request reasonable accommodations during the application and hiring process by contacting *****************************_ Salary Description $22 - $24 hourly, DOE

Fiber Splicer (T3) Crown Castle is the nation's largest provider of shared communications infrastructure: towers, small cells and fiber. It all works together to meet unprecedented demand-connecting people and communities and transforming the way we do business. Whenever you make a call, track a workout or stream music and videos, we're the ones providing the communications infrastructure that makes it all possible. From 5G and the internet of things to drones, autonomous vehicles and AR/VR, we enable the technologies that help people stay safe, connected and ready for the future. Crown Castle is publicly traded on the New York Stock Exchange (CCI), is part of the S&P 500 and is one of the largest Real Estate Investment Trusts in the US. We offer a total benefits package and professional growth development for teammates in any stage of their career. Along with caring for our teammates, we're an active member in the communities where we live, work and do business. We have a responsibility to give back, which we do through our Connected by Good program. Giving back allows us to improve public spaces where people connect, promote public safety and advance access to education and technology. Although you'll be hired as a Crown Castle employee, your employment and the responsibilities associated with this job likely will transition to an acquiring company in the future. For more information, please visit: https://www.crowncastle.com/strategic-review-results Role The Fiber Splicer position will splice & test fiber optic cables in aerial, underground, and indoor physical field environments. The position will need to have attention to detail regarding setting up splice locations, termination points, splice quality, work environment safety and general fiber optic construction. This position will be subject to on-call and shift duties. Weekends and holiday work will also be required. Responsibilities Splicing on new construction and restoration for a variety of cable types (Loose Tube, Ribbon, Micro, OPGW, etc). Active splicing activity in cables with both dark fiber and lit services. Conduct and validate all testing of network equipment to ensure adherence to all Crown Castle Fiber procedures and equipment manufacturer's specifications. Work with the Network Operations Center for final acceptance and testing of all newly installed equipment and rings. Tests to include validation of all provisioning, all alarm monitoring to the NMS (Network Management System), network switch protection, etc. Work with Fiber Optic, SONET, Ethernet and SDH related test equipment including OTDR, PMD, Optical Spectrum Analyzer, BER Test Sets, Sniffers. Perform site survey of remote locations to ensure quality installation of all racks, equipment power plants, fiber cable, etc. Report any and all defects to the Operations Manager and /or OSP Project Engineer. Label and tag all equipment and cabling according to Network Engineering Diagrams. Perform advanced analysis and troubleshooting of problems / issues while assisting the NOC/customer. Participate in on-call rotation schedule for nights and weekends. Perform other duties and responsibilities as required and assigned. Perform both hardware and software updates and/or changes to remote site equipment as necessary. Complete and maintain hard copy and/or electronic records of work completed on various assignments. Including, but not limited to, splice diagrams, patch panels, and test results. Interface with customers and carriers in support of service delivery and assurance. Work independently for extended periods of time. Respond to Customer Troubles on 24-hour basis. Work closely with the NOC, Sales, Engineering, and customers. Education/Certifications High school diploma or equivalent required Associate degree or equivalent work experience preferred Valid Driver's license required Experience/Minimum Requirements One (1)+ years of experience in the splicing, testing, installation, maintenance and repair of fiber optic networks and/or Outside Plant fiber experience. Or minimum of two (2) years of field experience or military experience. Prefer prior work experience with base station equipment, NMS, equipment installation and maintenance, low-power broadcast equipment and experience in both the construction, installation and maintenance phases Prefer prior use of Volt/Ohm meter, RF power meter, frequency sweep equipment, spectrum analyzer, fault locating equipment and battery conductance meters Knowledge of Outside Plant Construction techniques (aerial & underground) preferred Working knowledge of NESC, NEC and OSHA standards preferred Experience splicing ribbon and loose tube cables. A Valid driver's license is a bona fide job requirement to drive and operate a Crown Castle vehicle in this position. Subject to local and state eligibility, a pre-employment background check with MVR will be conducted to evaluate a candidate's safety record and eligibility to drive for a job. Other Skills/Abilities Excellent organizational/administrative skills Self-motivated team player Solid written and verbal communications skills Ability to multi-task in a fast-paced environment Customer service orientation with a strong problem-solving approach Possession or ability to readily obtain a valid driver's license for the type of vehicle or equipment operation (e.g. vehicle with bucket lift). Knowledge of fiber optics termination panels Organizational Relationship Reports to: Supervisor Field Operations Title(s) of direct reports (if applicable): N/A Additional Information: N/A Working Conditions: Will be required to travel to customer and/or project sites with exposure to heavy equipment and environmental conditions over 90% of the time. Works in a normal office setting with no exposure to adverse environmental conditions as little as 10% of the time. Position requires on call rotation involvement. Ability to use hand tools, climb ladders, pull fiber cables and wires. Splicing work may be performed in a confined splice trailer or other available space. The work may often be performed near busy city, state or federal streets and highways. Employee may be exposed to noise, dust, dirt, grease, etc. Compensation The pay range offered for this position is $32.12-$44.13 per hour. A candidate's offer is determined by various factors including but not limited to, depth of experience, role-related knowledge and skills, relevant education or training, internal alignment, and work location. Depending on the position offered, the compensation package may also include incentive compensation opportunities in the form of a discretionary annual cash bonus or commissions, and equity incentives. Employees (and their families) are eligible for medical, dental, vision, and basic life insurance. Employees are able to enroll in our company's 401k plan. Employees will also receive a minimum of 18 days of paid time off each year and 12 paid holidays throughout the calendar year. Pursuant to the Los Angeles County and San Francisco Fair Chance Ordinance, we will consider for employment qualified applicants with arrest and conviction records. If you are interested in joining our team, please visit the Crown Castle careers site (crowncastle.com/careers) to apply. We do not accept resumes from agencies, headhunters, or other third-party suppliers who have not signed a formal agreement with us. This position will remain posted until filled. #LI-IM1

About the Organization Chroma Systems Solutions, Inc. is a leading designer and manufacturer of power testing instruments and systems including programmable AC Power Source and DC Power Supplies, AC loads and DC Electronic Loads, Digital Power Meters and Automated Testing Systems for applications in LED Lighting, Led Drivers, Aerospace, Defense, Military, Automotive, Medical, Battery, Solar, Marine, and Regulatory Testing. Description JOB TITLE: Repair Services Technician DEPARTMENT: Chroma Service Support REPORTS TO: Repair Services Manager EMPLOYEE TYPE: Full-Time LOCATION: 25612 Commercentre Dr, Lake Forest, CA 92630 SALARY: is commensurate with relevant experience Chroma Systems Solutions, Inc. is a leading designer and manufacturer of power testing instruments and systems including programmable AC Power Source and DC Power Supplies, AC loads and DC Electronic Loads, Digital Power Meters and Automated Testing Systems for applications in LED Lighting, Led Drivers, Aerospace, Defense, Military, Automotive, Medical, Battery, Solar, Marine, and Regulatory Testing. This position will interface with the Service Repair Manager to determine if the issue is within design specification, is a design flaw, or is being used for the proper application to validate under warranty or out of warranty status of repairs, and conduct the repair, calibration, cleanup and final testing of these units. The candidate must be able to absorb and understanding applications such as LEDs, electric cars, fuel cells, power supplies, battery regen systems etc. Working knowledge of Power Instrument Calibration methods and requirements is a must. Working knowledge of inventory management and control is required to perform daily repair tasks. ESSENTIAL DUTIES & RESPONSIBILITIES * Ensure RMA repairs and calibrations are completed per 8-10 day repair goals. * Ability to analyze and diagnose technical issues per designs and specifications of equipment serviced. * Assist Service Repair Manager in material control and planning functions to support Repair Process. * Maintain and improve on department Key Performance Repair Indicators (KPI's). * Handle escalated customer issues replicating customer setup to ascertain problem * Read schematics, apply electrical/electronic principles and troubleshoot instruments to board or component level where applicable to support team of Service Technicians. * Understand and apply AC theory to customer issues involving Chroma AC power test instruments duplicating customer setups to assess issue * Ability to run Calibrations functions on a variety of Chroma instruments and equipment. * Maintain a clean, organized and professional work environment, with Safety as the key focus. * Diligent in solving and following up on customer issues * Effective time management in an effort to meet or beat resolution time * Work within prescribed electrical safety rules established by OSHA and Quality guidelines QUALIFICATIONS * 3-4 years or more experience in AC power electronics, OR * AA or Bachelor's degree with 1-2 years of experience in AC power electronics. * Ability to work in fast moving Repair Lab with lab team. * Working knowledge of electrical instrument calibration for power, medical and battery systems. * Capacity to work under tight or shifting deadlines and adhere to procedures * Professional level verbal and written communication skills. Detail Oriented. * Proficient in MS Office, and basic computer skills. SUPERVISORY RESPONSIBLITIES This is a non-supervisory position. PHYSICAL DEMANDS General office skills and dexterity are required. Must be able to lift 30 pounds. COMPANY BENEFITS * Bonus programs based on individual and company performance * Vacation, sick, bereavement time * Medical, dental, and vision plans for employees and dependents * Life insurance, AD&D, long term disability, and employee wellness programs * 401(k) retirement accounts with immediate vesting of company contributions * Profit sharing programs WORKING CONDITIONS Chroma Systems Solutions is an Equal Opportunity Employer. All qualified applicants will receive equal consideration for employment without regard to age, race, color, religion, sex, sexual orientation, gender identity, national origin, political affiliation, marriage or veteran status, and will not be discriminated against on the basis of disability. EOE Statement We are an equal employment opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status or any other characteristic protected by law. Pay Range $25.00 - $28.00 Tags RMA's, repairs, calibrations, high voltage, power instruments Location Commercentre

EXAM NUMBER W6541J When To Submit Your Application The application filing period will begin December 13, 2021, at 7:00 a.m. (PT). This examination will remain open until the needs of the service are met and is subject to closure at any time without prior notice. Type of Recruitment: Open Competitive Job Opportunity No Withhold or out-of-class experience accepted. Check Out Our Outstanding Benefits! Click here to see a list of employee benefits. Who We Are The Internal Services Department (ISD) plays a major role in supporting all County of Los Angeles departments and commissions. With an annual budget of over $873 million and 2, 183 budgeted positions along with over 5,120 contracted workers of varying professions in facilities management, information technology, environmental, administrative, purchasing and contracting, ISD is the County's trusted partner and provider of choice. The Opportunity We are pursuing qualified candidates to fill Electronics Communications Technician (ECT) positions in the Interoperable Radio Systems Division, specifically the Microwave Tower and Sheriff Command & Control. These positions play a critical role in supporting First Responders, the microwave infrastructure and the Sheriff Command & Control Center. Position Responsibilities Maintains, repairs, and installs fixed and land mobile radio communications equipment, such as mobile land hand-carried radio transceivers, base and remote station transmitters, receivers, and repeaters, multiplex equipment, dispatch consoles, and other related electronic equipment such as land line and radio inter-operability equipment. Assists in the development, fabrication, and testing of special and experimental electronic equipment. Modifies commercial equipment to adapt to specific uses. Maintains, repairs, and installs miscellaneous electronic equipment, such as telemetering devices, encoders, converters, closed circuit television systems, and associated equipment. Sets up emergency communications centers for operation by County departments. Demonstrates and explains the correct operation of equipment. Trains or orientates new or inexperienced personnel. Keeps records of time and material used in servicing equipment. Drives automotive equipment to and from work sites.Requirements to Qualify Four (4) years of experience in the installation, maintenance, and repair of radio communications transmitting and receiving equipment, one year of which must have been at the journey level.* Vision: Vision and color perception must be adequate to effectively and safely perform essential job-related functions. License: A valid California Class C Driver License is required to perform job-related essential functions. Successful applicants for positions that require driving must obtain and present a copy of his/her driving record from the California State Department of Motor Vehicles before final appointment. Applicants should not present a copy of their driving history until asked to do so by the hiring department. The County will make an individualized assessment of whether an applicant's driving history has a direct or adverse relationship with the specific duties of the job. License must not be currently suspended, restricted, or revoked. A valid General Radiotelephone Operator License issued by the Federal Communications Commission (FCC). Physical Class: 3 - Moderate: Includes standing or walking most of the time, with bending, stooping, squatting, twisting, and reaching; includes working on irregular surfaces, occasionally lifting objects weighing over 25 pounds, and frequent lifting of 10-25 pounds. Special Requirement Information: * Journey-level experience is defined as possessing the required knowledge, skills, and training to perform a full-range and diversity of work independently and reliably. Positions at this level operate with fairly significant freedom from day-to-day supervision and need little or no guidance on such matters as selecting appropriate problem solving methods and techniques, locating appropriate regulations, or applying proper procedures to carry out work. Applicants MUST attach a copy of a General Radiotelephone Operator License to their application at the time of filing or within 15 days of submitting application. Applications submitted without the required documentation will be rejected as incomplete. Vision and color perception must be adequate to effectively and safely perform essential job-related functions. Desirable Qualifications: Experience working with Personal Computers/Laptops using various programming and testing software/utilities to monitor normal functionality of various radio communication systems. Knowledge of industry standard testing procedures and principles related to programming and testing related radio or communication equipment and accessories. Experience using and operating motorized and hand held equipment tools in order to perform the installations, adjustments, maintenance, & repairs on radio or communications equipment. Our Assessment Process: This examination will consist of an Interview covering Knowledge and Skills in the Field, Problem Solving Skills, Customer Service and Interpersonal Skills, and Oral and Written Communications Skills weighted at 100%. Candidates must achieve a passing score of 70% or higher on the examination in order to be placed on the eligible register. Note: All notifications including invitation letters will be sent electronically to the email address provided on the application. It is important that you provide a valid email address. Please add *************************, ***********************, and noreply@governmentjobs.com to your email address and list of approved senders to prevent email notifications from being filtered as spam/junk/clutter mail. Los Angeles County will not consider claims of not viewing or receiving notification to be a valid reason for late test administration or rescheduling of a test component. Eligibility Information: The names of candidates receiving a passing score in the assessment will be placed on the Eligible Register in the order of their score group for a period of twelve (12) months following the date of promulgation. Passing this examination and being placed on the Eligible Register do not guarantee an offer of employment. Applications will be processed on as-received basis and those receiving a passing score will be promulgated to the eligible register accordingly. No person may compete for this examination more than once every twelve (12) months. Vacancy: The resulting eligible register for this examination will be used to fill vacancies in the Interoperable Radio Systems Division of the Internal Services Department. Shift: Any. Appointees may be required to work any shift, including nights, weekends, holidays, overtime, and call back. How to Apply: Applications must be filed online only. We must receive your application by 5:30 p.m. (PT), on the last day of filing. Applications submitted by U.S. mail, fax, or in person will not be accepted. Apply online by clicking on the green "Apply" button at the top right of this posting. You can also track the status of your application using the website *********************************************** Many important notifications including invitation letters will be sent electronically to the email address provided on the application. It is important that you provide a valid email address. Please add *************************, ***********************, and noreply@governmentjobs.com to your email address and list of approved senders to prevent email notifications from being filtered as spam/junk/clutter mail. Applicants have the ability to opt out of emails from LA County. If you unsubscribe, you will not receive any email notification for any examination for which you apply with Los Angeles County. Regardless of whether you choose to unsubscribe, you can always check for notifications by logging into governmentjobs.com and viewing your profile inbox, which saves a copy of all emailed notices. Please make sure you put in the time and effort when filling out your application and supplemental questions (if any) completely. The acceptance of your application depends on whether you have clearly shown that you meet the Requirements to Qualify as listed on this bulletin. Provide any relevant job experience in the spaces provided so we can evaluate your qualifications for the job. For each job held, give the name and address of your employer, your job title, beginning and ending dates, number of hours worked per week, and description of work performed. If your application is incomplete, it will be rejected. Please note that all information included in the application materials is subject to verification at any point during the examination and hiring process, including after an appointment has been made. Falsification of any information may result in disqualification or rescission of appointment. Utilizing verbiage from Class Specification and Minimum Requirements serving as your description of duties will not be sufficient to demonstrate that you meet the requirements. Doing so may result in an incomplete application, and you may be disqualified. Computer and Internet Access at Public Libraries: LA County Public Library has announced they are reopening some libraries with limited hours access throughout LA County. Refer to their website at ************************************** for more information. For Candidates who may not have regular access to a computer or the internet, applications can be completed on computers at public libraries throughout Los Angeles County. Fair Chance Information: The County of Los Angeles is a Fair Chance employer. Except for a very limited number of positions, you will not be asked to provide information about a conviction history unless you receive a contingent offer of employment. The County will make an individualized assessment of whether your conviction history has a direct or adverse relationship with the specific duties of the job, and consider potential mitigating factors, including, but not limited to, evidence and extent of rehabilitation, recency of the offense(s), and age at the time of the offense(s). If asked to provide information about a conviction history, any convictions or court records which are exempted by a valid court order do not have to be disclosed." COVID-19 Vaccination: All County workforce members must be fully vaccinated against COVID-19 as a condition of employment. Successful candidates for this position will be required to submit proof of vaccination against COVID-19 or request an exemption for qualifying medical or religious reasons during the onboarding process. Candidates should not present proof of vaccination until instructed to do so by the hiring department. Have questions about anything listed above? Contact us: Exam Number: W6541J Department Contact Name: Hugo Vasquez Department Contact Phone: ************** Department Contact Email: ************************* California Relay Services Phone: ************** ADA Coordinator Phone: ************** Teletype Phone: ************** Alternate Teletype Phone: **************

ABOUT US Pramira is a premier general contractor delivering safe, high-quality construction services across California. With deep expertise in buildings, electrical, and telecommunications infrastructure, we are proud to support some of the most vital industries that power our communities - from healthcare and industrial sectors to utilities and telecommunications networks. Rooted in a culture of safety, integrity, and operational excellence, Pramira combines industry-leading technology, field-proven processes, and a team of passionate professionals to execute complex projects on time and with precision. We're not just builders - we're trusted partners who value long-term relationships and take pride in the work we do. At Pramira, our people are our foundation. We invest in their growth, prioritize their well-being, and empower them to shape the future of the built environment. If you're looking for a company where your work matters, your voice is heard, and your career can thrive - you belong at Pramira. Join us. Let's build something better - together. JOB DESCRIPTION The Fiber Splicer is responsible for the installation, testing, and maintenance of fiber optic cables in underground and aerial applications. ESSENTIAL DUTIES & RESPONSIBILITIES Fusion splices SM ribbon and loose tube fiber optic cables, to initiate or terminate various types of fiber optic connectors (ST, SC, LC). Installs and tests pressurized and non-pressurized closures on all types and sizes of cable. Analyzes and troubleshoots basic technical problems or issues. Reviews, interprets, and works with various maps, drawings, blueprints and testing documents. Performs daily testing and maintenance of splicing and testing equipment. Performs optical continuity and conformance testing. Makes splicing rearrangements on existing facilities in underground, aerial and building work locations. Adheres to company policies, regulations, procedures, and principles. All other duties as required. QUALIFICATIONS 1-3 Years Experience with installation and testing of fiber optic cables. Working knowledge of using various fusion splicing and optical testing equipment including, Alcoa Fujikura, GN Net Test, EXFO, Fitel, Sumitomo, and Viavi. Working knowledge of GS150 and GS350 Fiber Jetters. Ability to climb and work at elevations (e.g., from ladders, poles, lift trucks, etc.). Ability to work in confined spaces. Safety-conscious. Flexible schedule, with hours of day and days of week. BENEFITS Health insurance Dental insurance Vision insurance 401(k) Paid time off Referral program Advancement and promotion opportunities Pramira is proud to provide equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Company DescriptionJobs for Humanity is partnering with DISH to build an inclusive and just employment ecosystem. Therefore, we prioritize individuals coming from the following communities: Refugee, Neurodivergent, Single Parent, Blind or Low Vision, Deaf or Hard of Hearing, Black, Hispanic, Asian, Military Veterans, the Elderly, the LGBTQ, and Justice Impacted individuals. This position is open to candidates who reside in and have the legal right to work in the country where the job is located. Company Name: DISH Job DescriptionDepartment Summary Our Technicians deliver TV and Smart Home solutions to millions of customers. As a technician, we will train you to lead the charge for a world class customer experience, educating and connecting more Americans with every home you visit. You're the backbone of our organization and ensure an excellent customer experience. Our dedication to customer experience is paying off: in 2023, DISH earned the J.D. Power award for being #1 in Overall Customer Satisfaction for the sixth year in a row. Job Duties and Responsibilities What's in it for you? Guaranteed promotion after 6 months with a $1.00 per hour pay increase! Performance Incentives with the potential for up to $6,400 in your first year and $9,100 each following year! Paid training, paid time off & paid holidays 4-day work week with opportunities to work overtime Medical, Dental, Vision and Life Insurance packages and Health Savings Account Free DISH TV programming at a value of $114.99/month at your home, plus deeply discounted Sling TV and Boost Infinite phone plans 401(K) with company match & Employee stock purchasing program (ESPP) Tuition Reimbursement DISH-supplied van, tools, and uniforms Our greatest benefit is opportunity with over 400 of our current technician leadership starting as a technician. If you have grit and tenacity, you will grow quickly at DISH! Performance based promotions include an automatic 5% pay increase at level 2 and 10% at levels 3 and 4. What will you be doing? As a Field Technician, you will be representing DISH in customers' homes daily. We build our value by simplifying lives and using the DISH install to consult homeowners on their infinite smart home possibilities. Skills, Experience and Requirements All technicians must have: Aptitude to build rapport quickly. We want you to have a great time servicing our clients Ability to work at heights, including ladders up to 40 feet, and in all weather conditions Ability to lift over 70 lbs A valid driver's license in the state you are seeking employment with a driving record that meets DISH's safety standard Travel may be required Salary Range Compensation: $22.25/Hour Compensation and Benefits From versatile health perks to new career opportunities, check out our benefits on our careers website. Employment is contingent on successful completion of a pre-employment screen, to include a drug test and an acceptable driving record. Compensation listed may reflect a combination of hourly pay rate and location pay differential.

Details: The Lead Fiber Splicer is responsible for the installation and maintenance of fiber optic cables. They work on lines, analyzing and optimizing their operation. Underground and aerial fiber optic splice/tester. Responsibilities: Fusion splices SM ribbon and loose tube fiber optic cables, to initiate or terminate various types of fiber optic connectors (ST, SC, LC). Occasionally leads crews, involving supervision of other employees. Installs and tests pressurized and non-pressurized closures on all types and sizes of cable. Analyzes and troubleshoots basic technical problems or issues. Reviews, interprets, and works with various maps, drawings, blueprints and testing documents. Performs daily testing and maintenance of splicing and testing equipment. Performs optical continuity and conformance testing. Makes splicing rearrangements on existing facilities in underground, aerial and building work locations. Adheres to company policies, regulations, procedures, and principles. All other duties as required. Details: Technical Requirements: Minimum of 3 years on the job experience Working knowledge of using various fusion splicing and optical testing equipment including, Alcoa Fujikura, GN Net Test, EXFO, Fitel, Sumitomo, and Viavi. Basic understanding of Outlook, Excel and Word. Ability to read, review, interpret and understand technical documents and blueprints. Ability to climb and work at elevations (e.g., from ladders, poles, lift trucks, etc.). Ability to work in confined spaces. Solid organizational skills. Safety-conscious. Able to travel. Flexible schedule, with hours of day and days of week. Compensation: $25.00-30.00/hr EQUAL EMPLOYMENT OPPORTUNITY POLICY Motive Energy Telecommunications provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race (including traits historically or culturally associated with race, such as hair texture and protective hairstyles), religion (including religious dress and religious grooming), color, age (40 and over), genetic information, disability (mental and physical), medical condition (as defined under state law), national origin (including language use restrictions and possession of a driver's license issued under section 12801.9 of the California Vehicle Code), ancestry, sex (including gender, gender identity, gender expression), sexual orientation, marital status, familial status, parental status, domestic partner status, citizenship status, pregnancy (including perceived pregnancy, childbirth, lactation, or pregnancy-related conditions), military caregiver status, military status, veteran status, or any other status protected by federal, state, or local law. Motive Energy Telecommunications complies with applicable state and local laws governing non-discrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including, but not limited to, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Motive Energy Telecommunications expressly prohibits any form of unlawful employee harassment or discrimination based on any of these protected categories. The duties and responsibilities described above are not a comprehensive list and that additional tasks may be assigned. The scope of the job may change as necessitated by business demands.

Purpose:The Lead Fiber Splicer is responsible for the installation and maintenance of fiber optic cables. They work on lines, analyzing and optimizing their operation. Underground and aerial fiber optic splice/tester. Responsibilities: Fusion splices SM ribbon and loose tube fiber optic cables, to initiate or terminate various types of fiber optic connectors (ST, SC, LC). Occasionally leads crews, involving supervision of other employees. Installs and tests pressurized and non-pressurized closures on all types and sizes of cable. Analyzes and troubleshoots basic technical problems or issues. Reviews, interprets, and works with various maps, drawings, blueprints and testing documents. Performs daily testing and maintenance of splicing and testing equipment. Performs optical continuity and conformance testing. Makes splicing rearrangements on existing facilities in underground, aerial and building work locations. Adheres to company policies, regulations, procedures, and principles. All other duties as required.

SUMMARY: The Medium Voltage Splicer is responsible for performing high-quality splicing, terminating, and testing of underground medium-voltage distribution systems (typically 5kV to 35kV) for utilities, substations, and commercial facilities. This role requires expertise in MV cable systems, switching operations, and diagnostic testing. The ideal candidate will demonstrate a strong commitment to safety, precision, and reliability, and be willing to travel outside of San Diego as needed. ESSENTIAL DUTIES AND RESPONSIBILITIES: Perform splicing, terminating, and T-body installations on medium voltage cables using heat shrink, cold shrink, and molded technologies Conduct MV switching operations in accordance with utility and site protocols Read and interpret electrical schematics, blueprints, and manufacturer specifications Execute cable testing procedures including Megger, VLF/Tan Delta, continuity, phasing, and voltage verification Collaborate with foremen and project managers to plan and execute work safely and efficiently Maintain accurate documentation of splicing activities, test results, and materials used Ensure proper grounding and bonding of electrical systems Adhere to all safety protocols including lockout/tagout, PPE usage, and confined space procedures Participate in job site safety meetings and contribute to a culture of safety and accountability Train and mentor apprentices or junior splicers as needed EXPERIENCE, EDUCATION: 3+ years of experience in medium voltage cable splicing, terminations, and testing Completion of a recognized electrical apprenticeship program or equivalent field experience Proficiency in splicing techniques for various cable types including PILC, EPR, and XLPE Familiarity with OSHA regulations, NFPA 70E, and utility safety standards Experience with diagnostic testing equipment such as Megger and VLF/Tan Delta testers NCSCB and/or NECA MV splicer certifications preferred but not required Ability to work in confined spaces, trenches, and elevated environments Strong troubleshooting and problem-solving skills Valid driver's license and willingness to travel outside of San Diego as needed

Job Title: Fiber Splicer Department: Construction Reports To: Travis De Blieck Employment Status: Full Time, Salary (Exempt) Primary Location: Monmouth, Oregon Compensation: We will determine salary based on skills and experience in relation to the function of the role, as well as equity to any other employees in the same or similar role. Who is Congruex? Congruex was formed in 2016 to take advantage of historic demand for digital connectivity. Our founders are deeply rooted in the industry and have collectively built some of the country's largest communications infrastructures. We design and build digital infrastructure across the nation by providing engineering, construction, and specialty solutions with integrated delivery or as an a la carte service. The work we do enables everything in the modern world to operate, from healthcare and energy to transportation and social interactions. Our vision is to be the best provider of digital infrastructure solutions in the U.S. and our core values of GRIT connect everything we do. Will you join us? Job Summary: Our operating unit provides telecom construction services and we are looking for a Fiber Splicer to join our team. Fiber Splicers perform tasks associated with aerial and underground construction, splicing of fiber optic cable and communication systems for cable television.We are building tomorrow, together. Will you join us? Job Responsibilities (Including, but not limited to): Read and interpret work orders, specifications, engineering drawings and/or cut sheets to determine work to be done in sequence of task. Repair or splice in new line as needed to complete the testing and certification of the project. Install all passive and active devices, enclosures, and term panels. Test fiber optic lines for balanced signal between points-continuity. Pull fiber optic through existing duct package, pull cable through conduit either manually, blowing, or mechanically, and splice and activate underground and aerial lines. Optimize new Nodes and splice in node splits to reduce capacity. Utilize light meters and OTDR accurately. Learn how to safely utilize bucket trucks or climb utility poles to place cables on poles per system design. Close a project by completing production sheets, verifying proper levels after activation, adjust and troubleshoot, as necessary. Ensure that all work considers the safety of the customer, public and compliance with all governmental orders. Maybe required to perform additional duties and tasks as required by the Company. Required Skills & Qualifications: 5+ years of experience in fiber optic splicing A positive can-do attitude and openness to trying things new ways GRIT values - Guts, Reliability, Innovation, and Teamwork Must be able to pass a pre-employment drug screen and background check. Possess a valid driver's license Able to work both individually and in a team environment. Able to communicate professionally Able to lift and/or pull up to 80 pounds several times a day. Must be able to use hand tools such as screw drivers, pliers, drills, and wrenches. Have a high school diploma or equivalent Desired Skills and Qualifications (but not necessary): Bucket truck and other aerial work platforms. Why Work at Congruex? No matter what role you play, you are an important part of the One Congruex Family. We offer: · Medical, Dental & Vision Benefits · 401(k) Program with a company match · Bonus program · The pillars of Congruex culture are GRIT, safety, inclusion, and family. · Paid Vacation All requirements are subject to possible modification to reasonably accommodate individuals with disabilities. This job description in no way states or implies that these are the only duties to be performed by the employee occupying this position. Employees will be required to follow any other job-related instructions and to perform other job-related duties requested by their supervisor. Requirements are representative of minimum levels of knowledge, skills, and/or abilities. To perform this job successfully, the incumbent will possess the abilities or aptitudes to perform each duty proficiently. This document does not create an employment contract, implied or otherwise, other than an “at-will” employment relationship.

Job Title: Fiber Splicer Department: Construction Reports To: Travis De Blieck Employment Status: Full Time, Salary (Exempt) Compensation: We will determine salary based on skills and experience in relation to the function of the role, as well as equity to any other employees in the same or similar role. Who is Congruex? Congruex was formed in 2016 to take advantage of historic demand for digital connectivity. Our founders are deeply rooted in the industry and have collectively built some of the country's largest communications infrastructures. We design and build digital infrastructure across the nation by providing engineering, construction, and specialty solutions with integrated delivery or as an a la carte service. The work we do enables everything in the modern world to operate, from healthcare and energy to transportation and social interactions. Our vision is to be the best provider of digital infrastructure solutions in the U.S. and our core values of GRIT connect everything we do. Will you join us? Job Summary: Our operating unit provides telecom construction services and we are looking for a Fiber Splicer to join our team. Fiber Splicers perform tasks associated with aerial and underground construction, splicing of fiber optic cable and communication systems for cable television.We are building tomorrow, together. Will you join us? Job Responsibilities (Including, but not limited to): Read and interpret work orders, specifications, engineering drawings and/or cut sheets to determine work to be done in sequence of task. Repair or splice in new line as needed to complete the testing and certification of the project. Install all passive and active devices, enclosures, and term panels. Test fiber optic lines for balanced signal between points-continuity. Pull fiber optic through existing duct package, pull cable through conduit either manually, blowing, or mechanically, and splice and activate underground and aerial lines. Optimize new Nodes and splice in node splits to reduce capacity. Utilize light meters and OTDR accurately. Learn how to safely utilize bucket trucks or climb utility poles to place cables on poles per system design. Close a project by completing production sheets, verifying proper levels after activation, adjust and troubleshoot, as necessary. Ensure that all work considers the safety of the customer, public and compliance with all governmental orders. Maybe required to perform additional duties and tasks as required by the Company. Required Skills & Qualifications: 5+ years of experience in fiber optic splicing A positive can-do attitude and openness to trying things new ways GRIT values - Guts, Reliability, Innovation, and Teamwork Must be able to pass a pre-employment drug screen and background check. Possess a valid driver's license Able to work both individually and in a team environment. Able to communicate professionally Able to lift and/or pull up to 80 pounds several times a day. Must be able to use hand tools such as screw drivers, pliers, drills, and wrenches. Have a high school diploma or equivalent Desired Skills and Qualifications (but not necessary): Bucket truck and other aerial work platforms. Why Work at Congruex? No matter what role you play, you are an important part of the One Congruex Family. We offer: * Medical, Dental & Vision Benefits * 401(k) Program with a company match * Bonus program * The pillars of Congruex culture are GRIT, safety, inclusion, and family. * Paid Vacation All requirements are subject to possible modification to reasonably accommodate individuals with disabilities. This job description in no way states or implies that these are the only duties to be performed by the employee occupying this position. Employees will be required to follow any other job-related instructions and to perform other job-related duties requested by their supervisor. Requirements are representative of minimum levels of knowledge, skills, and/or abilities. To perform this job successfully, the incumbent will possess the abilities or aptitudes to perform each duty proficiently. This document does not create an employment contract, implied or otherwise, other than an "at-will" employment relationship.

Job Title: Fiber Splicer Department: Construction Reports To: Travis De Blieck Employment Status: Full Time, Salary (Exempt) Primary Location: Monmouth, Oregon Compensation: We will determine salary based on skills and experience in relation to the function of the role, as well as equity to any other employees in the same or similar role. Who is Congruex? Congruex was formed in 2016 to take advantage of historic demand for digital connectivity. Our founders are deeply rooted in the industry and have collectively built some of the country's largest communications infrastructures. We design and build digital infrastructure across the nation by providing engineering, construction, and specialty solutions with integrated delivery or as an a la carte service. The work we do enables everything in the modern world to operate, from healthcare and energy to transportation and social interactions. Our vision is to be the best provider of digital infrastructure solutions in the U.S. and our core values of GRIT connect everything we do. Will you join us? Job Summary: Our operating unit provides telecom construction services and we are looking for a Fiber Splicer to join our team. Fiber Splicers perform tasks associated with aerial and underground construction, splicing of fiber optic cable and communication systems for cable television.We are building tomorrow, together. Will you join us? Job Responsibilities (Including, but not limited to): Read and interpret work orders, specifications, engineering drawings and/or cut sheets to determine work to be done in sequence of task. Repair or splice in new line as needed to complete the testing and certification of the project. Install all passive and active devices, enclosures, and term panels. Test fiber optic lines for balanced signal between points-continuity. Pull fiber optic through existing duct package, pull cable through conduit either manually, blowing, or mechanically, and splice and activate underground and aerial lines. Optimize new Nodes and splice in node splits to reduce capacity. Utilize light meters and OTDR accurately. Learn how to safely utilize bucket trucks or climb utility poles to place cables on poles per system design. Close a project by completing production sheets, verifying proper levels after activation, adjust and troubleshoot, as necessary. Ensure that all work considers the safety of the customer, public and compliance with all governmental orders. Maybe required to perform additional duties and tasks as required by the Company. Required Skills & Qualifications: 5+ years of experience in fiber optic splicing A positive can-do attitude and openness to trying things new ways GRIT values - Guts, Reliability, Innovation, and Teamwork Must be able to pass a pre-employment drug screen and background check. Possess a valid driver's license Able to work both individually and in a team environment. Able to communicate professionally Able to lift and/or pull up to 80 pounds several times a day. Must be able to use hand tools such as screw drivers, pliers, drills, and wrenches. Have a high school diploma or equivalent Desired Skills and Qualifications (but not necessary): Bucket truck and other aerial work platforms. Why Work at Congruex? No matter what role you play, you are an important part of the One Congruex Family. We offer: · Medical, Dental & Vision Benefits · 401(k) Program with a company match · Bonus program · The pillars of Congruex culture are GRIT, safety, inclusion, and family. · Paid Vacation All requirements are subject to possible modification to reasonably accommodate individuals with disabilities. This job description in no way states or implies that these are the only duties to be performed by the employee occupying this position. Employees will be required to follow any other job-related instructions and to perform other job-related duties requested by their supervisor. Requirements are representative of minimum levels of knowledge, skills, and/or abilities. To perform this job successfully, the incumbent will possess the abilities or aptitudes to perform each duty proficiently. This document does not create an employment contract, implied or otherwise, other than an “at-will” employment relationship.