Telecom technician jobs in New Berlin, WI

Safely maintain, repair and rehab equipment in multiple areas within the Maintenance Division; Plumbing, Kitchen Equipment Repair, HVAC/R, Aquatic Systems & Water Quality. Responsibilities: Perform daily, weekly and monthly inspections of assigned equipment and locations Perform rehab work on assigned equipment and locations Maintain, install, repair and trouble-shoot various items, equipment and locations Inspect equipment and locations for malfunctions and repair Perform routine preventative maintenance on various pieces of equipment Assist with keeping a daily duty log of maintenance work performed as well as accurate records of preventative maintenance Effectively and professionally communicate and coordinate with other departments within the park. Comply with company procedures, policies and safety standards Help to ensure compliance with government codes and corporate mandates. All other duties as assigned. Qualifications: Knowledge of Plumbing, HVAC/R, Aquatic Systems and Water Quality Should possess practical skills and willingness to learn in all of the respective areas; Plumbing, HVAC/R, Aquatic Systems, and Water Quality Experience with electrical, plumbing & natural gas systems preferred Ability and willingness to work any shift and on weekends and holidays as needed Must be able to trouble-shoot clearly, calmly and safely in the presence of Guests and fellow Team Members Must possess strong safety sensitivity & ability to work with many different types of devices High School Diploma or equivalent Must possess a valid Driver's License

Details Department: Imaging Schedule: Rotating shifts: Mon-Fri 7:00am-3:30pm or 8:00am-4:30pm with rotating weekday and weekend on call shifts. Rotating Holiday call coverage as well. Primary coverage responsibility will be at All Saints Hospital with the expectation to also float to other IR departments in SE Wisconsin as necessary. Hospital: All Saints Hospital Location: Racine, WI Benefits Paid time off (PTO) Various health insurance options & wellness plans Retirement benefits including employer match plans Long-term & short-term disability Employee assistance programs (EAP) Parental leave & adoption assistance Tuition reimbursement Ways to give back to your community Benefit options and eligibility vary by position. Compensation varies based on factors including, but not limited to, experience, skills, education, performance, location and salary range at the time of the offer. Responsibilities Assist with procedures and provide diagnostic aid by conducting organ or body scans on patients. Prepare and position patients and select anatomic and technical parameters accurately. Prepare and administer contrast media and medications within the accepted scope of practice and applicable state and federal regulations. Observe patient during procedure and reports abnormal activity. Monitor protocols and recommends updates or refinements as warranted. Follow radiation safety procedures and guidelines. Able to perform all specialized imaging procedures such as angio, complex vascular and nonvascular interventional and therapeutic procedures, along with assisting the Radiologist/PA. Ensure all activities comply with regulatory agency standards. Requirements Licensure / Certification / Registration: BLS Provider obtained within 1 Month (30 days) of hire date or job transfer date required. American Heart Association or American Red Cross accepted. Radiologic Technologist specializing in Vascular-Intrvn Radiography credentialed from the American Registry of Radiologic Technologists (ARRT) obtained within 15 Months (1 1/4 year) of hire date or job transfer date required. General Radiography required in addition to Vascular Interventional Radiology required. State Radiology Technologist licensure issued by Wisconsin Radiography Examining Board required. General Radiology and state licensure required by hire or job transfer date. Registered Cardiovascular Invasive Specialist credentialed from the Cardiovascular Credentialing International (CCI) preferred. Education: High School diploma equivalency with 2 years of cumulative experience OR Associate's degree/Technical degree OR 4 years of applicable cumulative job specific experience required. Additional Preferences BLS Provider obtained within 1 Month (30 days) of hire date or job transfer date. American Heart Association or American Red Cross accepted. • Radiologic Technologist specializing in Vascular-Intrvn Radiography credentialed from the American Registry of Radiologic Technologists (ARRT) obtained within 15 Months (1 1/4 year) of hire date or job transfer date. General Radiography required in addition to Vascular Interventional Radiology. State Radiology Technologist licensure issued by Wisconsin Radiography Examining Board required. General Radiology and state licensure required by hire or job transfer date. Why Join Our Team Ascension Wisconsin has been providing rewarding careers to healthcare professionals since 1848. Operating 17 hospital campuses and over 100 related healthcare facilities from Racine to Appleton, you will find opportunities that allow you to create a career path you love, all while delivering compassionate, personalized care to the communities we serve. Ascension is a leading non-profit, faith-based national health system made up of over 134,000 associates and 2,600 sites of care, including more than 140 hospitals and 40 senior living communities in 19 states. Our Mission, Vision and Values encompass everything we do at Ascension. Every associate is empowered to give back, volunteer and make a positive impact in their community. Ascension careers are more than jobs; they are opportunities to enhance your life and the lives of the people around you. Equal Employment Opportunity Employer Ascension provides Equal Employment Opportunities (EEO) to all associates and applicants for employment without regard to race, color, religion, sex/gender, sexual orientation, gender identity or expression, pregnancy, childbirth, and related medical conditions, lactation, breastfeeding, national origin, citizenship, age, disability, genetic information, veteran status, marital status, all as defined by applicable law, and any other legally protected status or characteristic in accordance with applicable federal, state and local laws. For further information, view the EEO Know Your Rights (English) poster or EEO Know Your Rights (Spanish) poster. As a military friendly organization, Ascension promotes career flexibility and offers many benefits to help support the well-being of our military families, spouses, veterans and reservists. Our associates are empowered to apply their military experience and unique perspective to their civilian career with Ascension. Pay Non-Discrimination Notice Please note that Ascension will make an offer of employment only to individuals who have applied for a position using our official application. Be on alert for possible fraudulent offers of employment. Ascension will not solicit money or banking information from applicants. This Ministry does not participate in E-Verify and therefore cannot employ STEM OPT candidates.

Min USD $18.34/Hr. Max USD $28.42/Hr. The Repair Technician performs and supervises the cleaning, assembly, repair and maintenance of all equipment provided by Memorial Home Services of CI, this includes home medical equipment, respiratory and all other home medical equipment and maintaining all appropriate documentation. This service or repair could be for equipment to be delivered in compliance with specific medical requirements, modifications to existing customer equipment, repair of damaged or malfunctioning customer equipment or routine service required by the manufacturer. This position also is required to be a backup for our oxygen trans-filler. Qualifications Education: Education equivalent to graduation from high school is required. Licensure/Certification/Registry: Must possess a valid IL driver's license and be deemed as an acceptable driver in accordance with the MHS Fleet Safety Policy (five year MVR will be required). Experience: One or more years of experience in HME/healthcare delivery, warehouse, oxygen, electrical maintenance and repair or related experience preferred but not required. Other Knowledge/Skills/Abilities: Possess basic mathematics and personal computer skills, with the ability to retrieve and enter limited amounts of data are required. Must be detailed oriented, organized, focused and personable. Ability to use a variety of medical testing equipment. Demonstrates the ability to push and pull up to 75 pounds. Responsibilities Troubleshooting - Respiratory Diagnose, repair, and/or modify equipment as needed in order to assure proper functioning of respiratory equipment. This may be done in the shop or in the field. Be skilled in troubleshooting respiratory equipment to determine type of service or parts necessary for repair. Provide excellent listening and communication skills to customers in troubleshooting service requests via telephone or in person. In case of equipment failure or breakdown, converse with the operator of equipment to ascertain if this mechanical or user error. That may prevent a tech to go out and exchange or repair equipment. Equipment Assembly Assemble any new equipment coming in to make sure it is patient ready for patient delivery/pick up. Repair Respiratory Equipment Provide service or repair for: Equipment to be delivered in compliance with specific medical requirements. Repair of damaged or malfunctioning customer equipment. Routine service required by the manufacturer. Be able to prepare and effectively communicate repair quotes. Be able to repair all types of medical equipment provided, including: Rental DME. Respiratory DME in a timely manner. Maintenance - All Medical Equipment Inspect incoming rentals for hours used, maintenance needed and repairs required. Inspect and process returns per company and infection control guidelines. Design and implement test procedures for outgoing and incoming equipment and, as needed, calibrate O2 testing equipment. Follow established maintenance schedule for each piece of rental equipment per specific equipment procedure requirements (concentrators, cylinders) and per manufacturer's recommendations. Maintain equipment in good working order and appearance and verify equipment is working properly. Monitor and report abnormal wear and tear to equipment that may be caused by customer misuse or abuse. Replace disposables as needed. When complex repairs are needed, ensure repairs are scheduled and completed. Perform a thorough check on wheelchairs, beds, etc., in house and in the field and verify equipment is working properly. Provide complete thorough documentation on all equipment purchased or rental. Cleaning and Sterilizing - All Medical Equipment Clean and sterilize equipment and make sure equipment ready for repair and maintenance Equipment is to be logged in the system as cleaned and if repaired. A written log of serial numbers is also documented of cleaned equipment for verification purposes This responsibility is to be rotated between all Repair Technicians Have good organizational skills and detailed oriented Crushes boxes when needed Checks eye wash station weekly Abides by all OSHA guidelines Make sure all cleaning solutions and chemicals are available for cleaning and sterilizing purposes Quality Improvement Supervise equipment delivered to maintain quality control. Verify complete shipments to customers. Verify equipment sale/rent to be in good working order before delivery. Thorough documentation on all rental equipment, including: Service date. Repair detail. Serial numbers. Cleaning dates and initial. Warranty information Parts & Equipment Inventory Maintain an adequate and appropriate supply of repair parts. Purchase special parts only as needed and on the most cost efficient basis. Place all items received for stock into their appropriate locations on a daily basis. Perform accurate physical inventory daily on parts and serialized equipment Shipping and Receiving Possess skill in efficient preparation of products for shipping on a daily basis. Receive all items shipped on a daily basis. Verify accuracy of shipment, notify appropriate parties of shipments received, and record properly for inventory purposes. New equipment needs to be unpacked, noted for inventory and stocked quickly. Notify vendor and purchasing of damage or shortage immediately and follow up. Manuals, Documentation and Knowledge. Maintain up-to-date files of manufacturer's repair and maintenance manuals on the P Drive of all HME equipment owned by the company (as available) and other related documentation. Have familiarity with service requirements of each piece of equipment owned by this company. Maintain well-organized and current documentation for all maintenance and repair to DME and respiratory related equipment, including equipment tracking and maintenance logs. Create, submit, and maintain proper paperwork for warranty work. When appropriate, be able to create or process proper billing materials. Trans-filling Back up Required Participates in, and successfully completes, all required onsite, offsite, and on-the-job training to ensure the safe and compliant execution of all job duties. Keeps abreast of procedural and safety changes as new equipment or regulatory guidelines are introduced. Trans-fills bulk liquid oxygen into high pressure cylinders. Adheres to safety and security procedures at each step. Documents processes undertaken as procedures are performed; ensures compliance with FDA documentation requirements. Monitors and updates documentation and tracking system(s) related to the purchase, issuance, recall, repair, and maintenance of oxygen transfer equipment and related components and accessories. Performs other related work as required or requested.

Founded in 1985, ATS is a company with a presence in the United States, Mexico and the United Kingdom. We are professionals in Industrial Maintenance and we make factories run better. Fundada en 1985, ATS es una empresa con presencia en los Estados Unidos, México y el Reino Unido. Somos profesionales en mantenimiento industrial y hacemos que las fábricas funcionen mejor. Principal Duties/Responsibilities: · Extensive travel required. (Local, National) · Promotes and adheres to the ATS safety culture. · Engages in various work environments and industries to lead reliability centered maintenance efforts. · Mentors, coaches, and provides reliability best practices for applications in customer facilities, by customer personnel · Identifies top potential issues leading to lost production and preventable maintenance spending. Communicates findings with leadership. · Provides solutions to root cause deficiencies and demonstrates economic benefits to their correction. · Actively drives the implementation of equipment improvement projects. · Identifies and implements current and new processes / technologies to increase equipment performance and uptime · Champions systems and best practice procedures towards a proactive manufacturing culture. · Analyzes equipment performance, failure data, and corrective maintenance history to develop and deploy engineering solutions, improved maintenance strategies, preventative maintenance optimization, and other reliability techniques. · Provides technical service to operations and manufacturing personnel on equipment related troubleshooting efforts. · Utilizes predictive, preventative, and precision maintenance technologies and strategies designed to identify or control risks prior to failure and ensure optimum maintenance execution. · Collaborates with the maintenance team to prioritize assets and actions by determining failure probabilities and evaluating the risk of compliance, supply, strategy, and cost. · Provides training and coaching in Root Cause and Reliability Analysis and takes ownership for ongoing corrective action tracking, implementation and follow up to ensure that all Root Cause Analysis projects are documented. · Ensures compliance with regulatory requirements and ATS policies and procedures. Knowledge, Skills, Abilities (KSAs), & Competencies: Essential KSAs: · Bachelor's degree in engineering (ABET accredited) · Eight or more years of reliability experience across 2 or more manufacturing sites · Demonstrates ability to perform full array of reliability tool sets · Strong technical understanding of electrical or mechanical components, tools, and designs · Ability to complete a failure mode effects analysis, cause and effect diagrams, root cause failure analysis, life-cycle costing, and risk analysis · Ability to research and apply new equipment technology / trends · Robust problem solving, mathematical, analytical, and decision making skills · Proficiency with computers, maintenance systems, and applications, including Microsoft Office · Excellent verbal communication, facilitation, and presentation skills · Strong reporting and technical writing capability · Ability to build and maintain positive, professional relationships Desirable KSAs: · Desire to develop into a leadership role · Experience with data trend analysis, vibration analysis, motor current analysis, oil analysis, lubrication and hydraulic testing, laser alignment, nondestructive testing, infrared thermography, ultrasound technology, acoustic reliability technology, Weibull analysis, and Six Sigma or Lean Manufacturing methodologies · Knowledge of various government regulations such as, Current Good Manufacturing Practice (cGMP), National Electrical Testing Association (NETA), Environmental Protection Agency (EPA), and Occupational Safety and Health Administration (OSHA) · CMRP certification · Green Belt certification · STS certification Competencies: · Drive & Motivation · Interpersonal Skills · Task Management · Strategic Skills · Customer Focus · Self-awareness · Management & Leadership Physical Demands and Working Conditions: While performing the duties of this job, the employee is regularly required to stand; walk; use hands/fingers to handle, or feel; reach with hands and arms; climb, ascend/descend or balance to heights that may require a ladder or lift; stoop, kneel, crouch, or crawl in confined spaces; and talk or hear. The employee is occasionally required to sit. The employee must occasionally lift and/or move more than 50 pounds. The employee is regularly required to use close vision and color vision. The employee is occasionally exposed to outside weather conditions and risk of electrical shock. Work is typically performed in a factory environment and is usually very loud. In the factory environment, the employee may be exposed to hazardous materials and/or greasy or slippery factory floors. ATS believes in fair and equitable pay. Please note that actual salaries may vary within the range, or be above or below the range, based on factors including, but not limited to, education, training, experience, professional achievement, business need, and location. Pay Range$50.96-$65.19 USD ATS is committed to providing equal employment opportunities in all aspects of employment to all applicants and employees without regard to age, color, race, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, disability, veteran status, genetic information, or other legally protected status. Review the privacy policy here. ATS se compromete a brindar igualdad de oportunidades de empleo en todos los aspectos del empleo a todos los solicitantes y empleados, independientemente de su edad, color, raza, religión, sexo (incluido el embarazo, identidad de género y orientación sexual), origen nacional, discapacidad, estatus de veterano, información genética u otro estatus legalmente protegido. Revisión de la política de privacidad aquí here.

Job Title: Telecom Analyst / VoIP Technician Duration: 12 Months Compensation: $28 /hour W2 Benefits: Medical, Dental, Vision, Life Insurance, Disability, Paid Sick Time, 401K ABOUT OUR CLIENT / ABOUT THE ROLE Medix is currently seeking a Telecom / VoIP Technician for a contract opportunity with one of our healthcare clients in the Milwaukee area. Our client is a large health system, going through a company-wide VoIP refresh. This Technician will be assisting this effort by unboxing, setting up and validating the new IP Phones. There will also be cabling and patch panel management (66 and 110 wiring punch down blocks). Please note that this role is onsite Monday - Friday, based out of Milwaukee RESPONSIBILITIES Working in a hospital setting Unboxing and deploying new VoIP phones Connecting phones to the network switches Running and connecting area cabling (CAT6) Managing 66 and 110 wiring punch down blocks Testing /validating connections Running / managing clean and efficient cabling in the closets and data centers REQUIRED QUALIFICATIONS Minimum 2 years professional experience in setting up VoIP Phones Ethernet Cabling (66/110) Ability to lift up to 25+ lbs ADDITIONAL INFORMATION Please note, this role will require the physical requirements of being able to lift up to 25lbs, and navigate cabling

Dürr CTS (Clean Technology Systems) develops advanced environmental technologies to make industrial production cleaner, safer, and more efficient. Across all our product lines, Dürr CTS offers responsive, local, and skilled service teams, delivering customer-focused support in maintenance, troubleshooting, spare parts, and plant modifications. Since November 1st, 2025, Dürr CTS has operated independently, with 1,300 employees across 12 countries. We provide reliable and innovative environmental technology solutions, helping customers worldwide meet their regulatory and sustainability goals. Our Portfolio Includes: Air Pollution Control: thermal oxidation, sorptive processes, particulate matter separation Noise Abatement: Silencer products, filtration, gas turbine inlet and exhaust systems by Dürr Universal Decentral Power Generation: Organic Rankine Cycle systems with Cyplan ORC We serve a wide range of industries, including chemical, pharmaceutical, food, automotive, energy, surface coating, and many more, providing tailored solutions that help customers meet environmental regulations, reduce emissions, ensure operational reliability, and improve sustainability. We're Looking for People Who: Can be the face of our company to our customers Love to travel and experience new work environments Enjoy navigating challenges that require you to think on your feet Have a high mechanical aptitude Crave personal development and improvement What We Do: Durr Universal provides noise and environmental solutions to our customers. For more than 65 years, we have supported our customers through our design, manufacturing, and installation of acoustic and emissions systems. We work to continually improve our knowledge of our equipment, our customers' processes, and how the two interact. Why We're in Business: Durr Universal provides value-added solutions to our customers. We pride ourselves on the thoroughness of our pre-sale consultation and solution development, the quality and longevity of our equipment, and our best-in-class service from initial customer inquiry through the life of the equipment. We seek long-term partnerships with customers that value our approach. This position will oversee all activities of both Durr Universal internal and Field Service contractors and report on the performance of the department functions with appropriate personnel in the company. This position will require working with the Field Service Technicians, Project Managers, Sales, Engineering, 3rd party Contractors, and site customers to ensure overall contract requirements are successfully met for field service work, warranty repair, quality inspection, and technical supervision. This position requires travel from 70% to 90% to various potential customer sites to assist in quoting, supervision, auditing, inspection, etc. of dedicated Field Service Teams, along with assisting and overseeing field service project work scopes and related scopes. The Field Service Supervisor/TFA must plan, organize, direct, and manage the work of individual field service technicians and contractors in various field operations. Essential Functions: Put safety first in everything you do and help ensure our colleagues, customers, and business partners remain safe at all times. Be the liaison between the customer, contractor, and Dürr staff Assist in the installation of Dürr and other equipment Manage all 3rd party subcontractors, ensure work is done safely, properly, and on time and in budget. Work with site personnel and internal personnel on project issues and resolve them effectively. Develop cost estimates and customer proposals for field installation projects. Creation and deployment of mobilization schedules for the field service department. Assist in equipment commissioning and documentation as required Participate in contract reviews and kick-off meetings involving the field service scope of work. Assist with parts procurement as needed When required provide customer training on installed equipment Provide equipment modular build support as required Experience and Skills: Must make safety a priority every day AWS Certified Welding Inspector (CWI) is a plus Painting and coatings certification/ experience is a plus OSHA 10 or 30 Hour Safety Trained Familiar with MS Word, Excel, and PowerPoint Desire to travel Ability to read and interpret engineering drawings and technical documents (i.e. layout, sectional drawings) Excellent written and verbal communication skills Desire to work hands-on in an industrial environment Proven mechanical aptitude - including the use of various machining tools, welding equipment and methods, and various testing equipment Demonstrated experience with installation and inspection of large steel structures (ducting and tall stacks, steel platforms) and their welding processes, inspection of welds, and industrial coatings Working experience with safe lifting & rigging methods Fully capable with Microsoft Office software package Flexible to adapt to same-day and next-day changes Ideal candidate will have experience developing RFQ/RFPs for work that would be subcontracted to 3rd party vendors. Experience with steel fabrication and custom equipment manufacturing. Position can be located anywhere near a major airport Dürr CTS, Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. We maintain a drug-free workplace and perform pre-employment drug and alcohol testing. Note to all Staffing Agencies: Dürr CTS, Inc. has a team of dedicated Human Resources professionals who are responsible for all hiring needs. Our practice is to partner and work with our approved vendors on an as-needed basis. We do not accept resumes from agencies that are not on our preferred vendor list and have not signed our Recruiting and Permanent Placement Contract. Any resumes submitted from unapproved vendors will be considered unsolicited, and Dürr will not be obligated to pay a referral fee.

Maintenance Technician (Full-Time, 4-Day Work Week) Pay: $24-$26 per hour Schedule: 4x10-hour days (Full-time) Employer: Lutheran Social Services (LSS) Make a Difference With Your Skills Are you looking to use your maintenance skills to improve the quality of people's lives? Join Lutheran Social Services (LSS) as a Maintenance Technician and help maintain safe, functional, and welcoming environments for our residents and staff. In this role, you'll work four 10-hour days each week and cover maintenance needs across properties in Madison, Beaver Dam, and Columbus. You'll complete a variety of repair, inspection, and upkeep tasks that directly support our mission of serving the community. What You'll Do Perform skilled and semi-skilled maintenance work on apartment buildings, offices, and program sites. Handle plumbing, electrical, HVAC, carpentry, and general repairs. Conduct preventative maintenance and safety inspections. Maintain property appearance, curb appeal, and code compliance. Respond to emergency maintenance calls as part of an on-call rotation. Collaborate with team members, vendors, and contractors. Operate snow removal and grounds maintenance equipment. Purchase supplies and materials as needed within budget guidelines. What We're Looking For High school diploma or GED preferred. 2+ years of general maintenance or building repair experience preferred. Knowledge of building systems (plumbing, electrical, HVAC, carpentry). Ability to read blueprints and follow safety procedures. Strong teamwork and communication skills. Valid driver's license and reliable transportation (required). Willingness to travel between locations in Madison, Beaver Dam, and Columbus. Why Join LSS? We care about our employees as much as we care about the people we serve. LSS offers: Competitive Pay: $24-$26/hour Full Benefits Package - Medical, Dental, and Vision Insurance Paid Time Off + 10 Paid Holidays Mileage Reimbursement 403(b) Retirement Plan with employer contributions Public Service Loan Forgiveness (PSLF) Eligibility Calm Premium Wellness App Access Early Earned Wage Access through UKG Wallet Employee Assistance Program (EAP) Annual pay raises and service recognition awards About LSS At Lutheran Social Services (LSS), we believe in helping people live their best lives. As one of the largest nonprofit organizations in the region, we provide housing, behavioral health, and community support programs that make a lasting impact. Apply Today If you take pride in your work, enjoy hands-on problem-solving, and want to use your skills to make a difference, apply today to join the LSS team! LSS is an Equal Opportunity/Affirmative Action employer.

Searching for a Field Service Technician to join our Waukegan, IL team! Responsible for planning and coordinating site activities including erection, startup, training and troubleshooting to ensure that equipment is installed and operated in accordance with contract design drawings and operating instructions. This role requires 100% travel All candidates must be legally authorized to work in the US and will not require current or future sponsorship. Responsibilities: Performs Field Service activities for erection to ensure that systems are installed in accordance with design drawings. Performs Field Service activities for component testing and system startup to ensure that systems are commissioned and performing in accordance with contract design drawings and operating instructions. Provides maintenance, troubleshooting, and operational support on existing installations. Documents field activities, observations and recommendations. Submits weekly expense reports and timesheets as directed. Performs special projects, customer training and routine service visits and miscellaneous job-related duties as assigned. All other duties as assigned. Education and Experience: High School Degree or higher is preferred. 1 5 years as Field Service Technician or comparable experience. Demonstrated knowledge of basic technical theories, practices, drawings and methods. Experience working in a power or an industrial plant or similar environment. Willing to travel 100% of the time.

Our large financial/banking client is currently seeking a Datacenter Technician This is a contract to hire role that must be done onsite on in the southwest Racine area W2 only, no C2C or third parties. This job will have the following responsibilities: Coordinate with Data Center and Field Site teams, Facilities, and contractors to successfully execute structured cabling builds Work with design team to develop timely project specific specification and scope documentation, including floor plans, pathway and rack layouts, rack elevations, cable schedules, and bill of materials for all ISP and OSP cabling Coordinate infrastructure technologies (AV, Network, Voice, IP security systems) for Enterprise Facilities driven projects Collaborate with internal stakeholders to deliver designs, meeting capacity and network requirements and go-live timelines Qualifications & Requirements: Experience designing, deploying and maintaining complex data center environments (new facility, major facility renovations/expansions) Understanding of indoor/outdoor cable plants, including copper cabling, long range/short range fiber optic cabling Knowledge of information technology infrastructure components (LAN/WAN/SAN, firewalls, Wintel/Lintel/UNIX servers, storage, roll-on equipment, wireless, DAS) Data center and/or networking industry certifications preferred

Job Posting Start Date 12-10-2025 Job Posting End Date 01-12-2026Flex is the diversified manufacturing partner of choice that helps market-leading brands design, build and deliver innovative products that improve the world.A career at Flex offers the opportunity to make a difference and invest in your growth in a respectful, inclusive, and collaborative environment. If you are excited about a role but don't meet every bullet point, we encourage you to apply and join us to create the extraordinary.Job Summary To support our extraordinary teams who build great products and contribute to our growth, we're looking to add an Facility Technician located in Libertyville, IL. What a typical day looks like Responds to service calls and in-house repairs throughout the facility. Troubleshoots, responds to work orders, repairs systems and equipment. Installs office fixtures and performs work in various maintenance trades including mechanical, electrical and plumbing. Routine assignments include moving furniture, materials and equipment. Conducts scheduled preventative maintenance and breaks down equipment for clean up. Converses with equipment operators to ascertain problems with equipment before breakdown, and to determine if breakdown is due to human error or mechanical problems. Tests faulty equipment and applies knowledge of functional operation of electronic units and systems to diagnose cause of malfunction. Tests electronic components and circuits to locate defects. Replaces defective components and wiring and adjusts mechanical parts. Aligns, adjusts and calibrates equipment according to specifications. Calibrates testing instruments. May maintain records of repairs, calibrations and tests. Enters information into computer to copy program from one electronic component to another, or to draw, modify or to store schematics. Oversees emergency system backup. Ensures plumbing, sewer, water, electrical and mechanical systems are functional. The experience we're looking to add to our team: Developed computer skills Minimum 2 years of experience in facility maintenance Ability to work independently Knowledge of the following tools may be required: Electronic Assembly: blueprints, schematics; trouble shooting; Mechanical & Electrical Tools: power air guns, taps & dies, alignment tools, measuring tools, AutoCAD High school degree or higher Work Environment: While performing the duties of this job, the employee is regularly exposed to moving mechanical parts. The employee is frequently exposed to risk of electrical shock. The employee is occasionally exposed to work that requires repetitive motion, toxic or caustic chemicals, the ability to work in a confined space and risk of radiation. The noise level in the work environment is usually loud. Physical Demands: Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to talk and hear. The employee frequently is required to stand; walk; reach with hands and arms; climb or balance; and stoop, kneel, crouch, or crawl. The employee is occasionally required to sit and handle small components. The employee must frequently lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, and peripheral vision. What you'll receive for the great work you provide: Full range of medical, dental, and vision plans Life Insurance Short-term and Long-term Disability Matching 401(k) Contributions Vacation and Paid Sick Time Tuition Reimbursement Pay Range (Applicable to Illinois)$29.86 USD - $41.06 USD HourlyJob CategoryOperationsRelocation: Not eligible Is Sponsorship Available? NoFlex is an Equal Opportunity Employer and employment selection decisions are based on merit, qualifications, and abilities. We do not discriminate based on: age, race, religion, color, sex, national origin, marital status, sexual orientation, gender identity, veteran status, disability, pregnancy status, or any other status protected by law. We're happy to provide reasonable accommodations to those with a disability for assistance in the application process. Please email accessibility@flex.com and we'll discuss your specific situation and next steps (NOTE: this email does not accept or consider resumes or applications. This is only for disability assistance. To be considered for a position at Flex, you must complete the application process first).

L1 Helpdesk Technician Are you a perfectionist who enjoys following directions? Do you need variety and change to keep from getting bored? Do you agonize over details and making sure all your work is perfect? Do you enjoy solving problems? Are you a team player whose first question is “How can I help you?” Do you enjoy juggling multiple tasks? What this role will entail: Serve as the first point of contact for customers seeking technical assistance over the phone or email Perform remote troubleshooting Determine the best solution based on the issue and details provided by customers Walk the customer through the problem-solving process Direct unresolved issues to the next level of support personnel Record notes regarding the issue and troubleshooting taken Create and maintain documentation Follow-up and update customer status and information Identify and suggest possible improvements on procedures What we need from you (system requirements): Driven to succeed at work and in all of life, hard work required ACCOUNTABLE to our clients as well as our company Keep a POSITIVE mindset with a solution focus. Desire for EXCELLENCE in what we do, all day every day. HUMBLY CONFIDENT you can make it happen, and if not, able to ask for help. Proven experience as a help desk technician or other customer support role Good understanding of computer systems, mobile devices, and other tech products Ability to diagnose and resolve basic technical issues Passionate (and patient) about problem solving and customer service. Diligent with note taking, following process, and documentation. Driven to learn more, stay positive, and grow; not only as a team member but in all of life. CompTia A+ and Net+ certifications are a plus! 2+ year of MSP experience REQUIRED More about us and where we are going: Our goal is to become the BEST cybersecurity and IT provider across Chicagoland. We PROTECT growing Chicagoland organizations from malicious cybersecur ITy threats and subpar nickel + dime IT support. We have doubled our company (team of 40+ with 200+ clients) in the last two years and will continue to grow at fast pace - planning to triple across the next three years. We have a fast-paced environment with ZERO micromanaging, we assess RESULTS. We gather feedback and adjust how we operate based on YOUR ideas. We CARE about our team and our clients and understand the need for flexibility with life+work. THREE great locations in Woodstock, IL as well as downtown Chicago (both are just off Metra UPNW line) and Manteno, IL and/or some flexibility to work from anywhere. Our all-inclusive total compensation and benefits package for this role includes: Ascension plan if applicable We provide 100% company paid health, dental, life, and vision benefits - value of $4,500 to $14,000/year We match 5% of your contributions to Guideline 401k - value of 5% of salary. Open Door PTO policy Company provided gear (notebook + iPhone) as well as company clothing. Our hiring process: Submit your application If we like what we see, we will reach out to schedule a video interview For a more in depth look at our jobs/benefits/hiring timeline check out ***************************

At ABB, we help industries outrun - leaner and cleaner. Here, progress is an expectation - for you, your team, and the world. As a global market leader, we'll give you what you need to make it happen. It won't always be easy, growing takes grit. But at ABB, you'll never run alone. Run what runs the world. This Position reports to: Drives Service Workshop Manager Your role and responsibilities In this role, you will have the opportunity to repair a variety of standard drive units and subassemblies. Each day, you will ensure the best possible and most cost-effective problem resolution. You will also showcase your expertise by executing work as per first-time right approach and ensuring the job is done on time and as per quality standards The work model for the role is: onsite #LI-Onsite This role is contributing to Motion Service in the US. You will be mainly accountable for: Review and plan daily work assignments, prioritizing customer products in for repair. Coordinate with the team Lead to ensure proper work scheduling, establishing priorities and expediting of repair orders. Process Repair work orders, both customer repair orders and production orders. Troubleshoot the repair of products, such as standard drive units, subassemblies and circuit boards; identifying and repairing the problem, performing testing and burn in activities as needed, ensuring the best possible, and most cost-effective problem resolution. Research bill of materials, Engineering Change Notice (ECN), or other documents to identify required parts for drive/component repair. Complete Material Requisitions or contact the Inventory Planner to obtain necessary parts Ensure the completion, processing and maintenance of all required paperwork, records, documentation, failure analysis reports, etc. Qualifications for the role Requires an associate degree in electronics and two years related experience; or High school diploma and four years of related electrical experience. Must be capable of passing Electrical Competency and Authorization Program (ECAP) level 3. Prior experience working with hand and power tools Knowledge of Variable Frequency Drives and the applications it supports preferred Prior experience with SAP or similar ERP system preferred #ABBCareers #RunwithABB #Runwhatrunstheworld More about us ABB is an Equal Employment Opportunity and Affirmative Action employer for protected Veterans and Individuals with Disabilities at ABB. All qualified applicants will receive consideration for employment without regard to their- sex (gender identity, gender expression, sexual orientation), marital status, citizenship, age, race and ethnicity, inclusive of traits historically associated with race or ethnicity, including but not limited to hair texture and protective hairstyles, color, religious creed, national origin, pregnancy, physical or mental disability, genetic information, protected Veteran status, or any other characteristic protected by federal and state law. For more information regarding your (EEO) rights as an applicant, please visit the following websites: ******************************************************************************************** As an Equal Employment Opportunity and Affirmative Action Employer for Protected Veterans and Individuals with Disabilities, applicants may request to review the plan of a particular ABB facility between the hours of 9:00 A.M. - 5:00 P.M. EST Monday through Friday by contacting an ABB HR Representative at **************. Protected Veterans and Individuals with Disabilities may request a reasonable accommodation if you are unable or limited in your ability to use or access ABB's career site as a result of your disability. You may request reasonable accommodations by calling an ABB HR Representative at ************** or by sending an email to ****************. Resumes and applications will not be accepted in this manner. We value people from different backgrounds. Could this be your story? Apply today or visit *********** to read more about us and learn about the impact of our solutions across the globe.

Are you a dynamic, creative, and detail-oriented professional with a passion for digital innovation? Do you thrive in fast-paced environments and enjoy working on projects that make a difference for global brands? Who We Are Stamm Media (******************* partners with brands and agencies to provide stunning event technology nationwide. Within Stamm Media, we operate a digital content studio with a reputation for delivering exceptional digital solutions for big brands. We specialize in creating custom software, motion graphics, and digital experiences that drive results and elevate brands. Our team is a tight-knit group of passionate professionals who thrive on collaboration, creativity, and excellence. The Role We are looking for a Junior Creative Technologist to join our team-someone who is passionate about technology, software, and creative problem-solving. This role is ideal for a recent graduate with a background in electrical engineering, computer science, digital media, or a related field who wants to apply their skills to the world of live events and interactive experiences. As a Junior Creative Technologist, you will assist in designing and implementing interactive AV solutions, working with both hardware and software to create engaging event technology. You'll gain hands-on experience with low-code platforms, microcontrollers, AV control systems, and real-time event programming, while collaborating with our team to push the boundaries of event technology. Location: In-Office (with flexibility) at Milwaukee, WI headquarters Travel: Occasional travel to client events across the U.S. Key Responsibilities Technical Development & Integration: Assist in designing and implementing interactive AV installations and event technology. Work with low-code/no-code platforms (e.g., Intuiface, TouchDesigner…). Help integrate microcontrollers, sensors, and controls into AV production setups. Support programming and configuration of lighting, sound, and video control systems (DMX, MIDI, OSC, etc.). Hardware & Electrical Support: Assist in the setup, wiring, and testing of AV and lighting systems. Work with basic electrical circuits and power management for custom installations. Learn and support signal routing, networking, and control protocols for events. On-Site Event Support: Travel occasionally to client events across the U.S. to assist with setup, troubleshooting, and operation of interactive AV systems. Provide technical support to ensure event technology runs smoothly. Troubleshoot and resolve technical issues in high-pressure event environments. Research & Learning: Stay up to date with emerging AV technologies, interactive tools, and software trends. Participate in internal R&D projects to test and develop new AV solutions. Learn from senior team members and develop hands-on skills in AV production technology. Who You Are Recent graduate or early-career professional with a degree in Electrical Engineering, Computer Science, Digital Media, or a related field. Passionate about technology, software, and creative AV experiences. Comfortable with basic coding (Python, JavaScript, C++ preferred) and eager to learn more. Familiarity with low-code platforms, microcontrollers (Arduino, Raspberry Pi), or AV programming is a plus. Strong problem-solving skills and willingness to troubleshoot in a fast-paced environment. Willing to travel occasionally and work on-site at live events.

Job Description National Technologies (NTI), a Network Connex Company, is a premier turnkey installer of fiber optic and data center infrastructure. Working on our team puts you on the leading edge of innovation in the digital communications space. If being a part of a tight-knit organization that operates in some of the most advanced technology environments around the world sounds like a dream job, NTI might be the right fit for you! With the perks of a large organization, NTI remains true to its roots as a home-grown company with an open door culture that welcomes new ideas and encourages professional growth. We set you on the right path with careful onboarding and thorough training programs that prepare you for success in your role and beyond. Position Overview: NTI is seeking a Traveling Foreman with will lead a team, ensuring projects are completed safely, on time, and to customer quality standards while performing advanced fiber optic splicing and testing tasks. This role requires national travel to various project sites and combines leadership, project management, and technical expertise in fiber optic infrastructure. Key Responsibilities: Ensure project safety, quality, schedule, and cost compliance with company/client standards. Lead 2-3 crew members, optimizing skills and equipment use. Act as primary liaison between Project Manager and crew. Interpret customer prints to plan tasks and schedule work. Hold daily pre-work meetings to align on goals and safety. Verify construction and splicing work meets standards. Complete phase-specific closeout documentation. Document job progress with photos. Maintain company equipment (vehicles, trailers, test tools). Perform precise fusion and mid-sheath splicing on high-count fiber cables (864ct, 1728ct, 3456ct). Conduct live fiber splicing during maintenance windows to minimize disruptions. Install fiber optic cables in various environments (underground, aerial, indoor). Execute OTDR/OLTS testing to assess cable performance. Troubleshoot and resolve live network fiber issues. Produce FastReporter reports for test and splicing documentation. Operate Fujikura splicers and EXFO testers for low-loss splices and diagnostics. Pull fiber cables through conduits/ducts for installations. Support cabinet bolting and basket tray installation (preferred). Safely operate scissor lifts for elevated work (preferred). Comply with OSHA, IBEW Local, and NTI safety standards Maintain a clean workspace and follow proper handling procedures for fiber optic materials and equipment. Work Schedule and Environment Work indoors and outdoors in various weather conditions, adapting to project requirements. Perform tasks during daytime and occasional nighttime maintenance windows as required by client schedules. Stand for extended periods (8-10 hours per day) and perform physically demanding tasks, including lifting and carrying up to 50 pounds. xperience and Education 5+ years of experience in the telecommunications industry with related experience in construction and tower work. 2-3 years of verifiable experience splicing and testing fiber optic cables for dark fiber providers (e.g., Zayo), meeting stringent quality and performance standards. 3+ years of hands-on experience using Fujikura fusion splicing machines for high-count fiber splicing (864ct, 1728ct, 3456ct). 3+ years of experience performing OTDR and OLTS testing with EXFO testing equipment. 2+ years of experience producing FastReporter reports for network documentation. Qualifications & Skills Proven ability to perform mid-sheath (ring-cut) splicing and live fiber network splicing with minimal service disruption. Strong troubleshooting skills for diagnosing and resolving issues on live/active network fiber. Familiarity with cable pulling, cabinet bolting, basket tray installation, and scissor lift operation (preferred). Strong written and oral communication skills for effective team and client interactions. Proficiency in Microsoft Office (Excel, Word, Outlook) for documentation and reporting. Strong interpersonal skills and a strong work ethic. Ability to pass a clean background check and drug screen. Valid driver's license required. Fluency in English for effective communication. Certification in fiber optic splicing or testing (e.g., FOA CFOT, BICSI, or equivalent) preferred. Prior experience with major telecommunications carriers or dark fiber providers beyond Zayo preferred. Familiarity with additional fiber optic testing tools or software beyond EXFO and FastReporter preferred. Union Affiliation: This is a union position under IBEW Local requiring adherence to union agreements, policies, and benefits structures. Benefits: Competitive union wages and benefits package through IBEW Local 640, including health insurance, retirement plans, and paid time off. Opportunities for professional development and training in advanced fiber optic technologies. Access to a supportive union environment with representation and advocacy. Collaborative and safety-focused work culture at NTI. Pay rates may vary based on skills, background, experience and specific location. NTI provides a comprehensive benefits package including health, dental, vision, life, and disability insurance and retirement savings options. For Union employees, pay rates and benefit levels are determined by union classifications which are set by the union. National Technologies (NTI) believes all persons are entitled to equal employment opportunities and does not discriminate against employees or job applicants because of race, color, gender, affectional or sexual orientation, domestic partnership status, ancestry, religion, national origin, citizenship status, marital status, disability, veteran status, age or any other protected group status. Upon acceptance of an offer, all candidates will be required to pass a background check and drug screening.

Company DescriptionJobs for Humanity is partnering with DISH to build an inclusive and just employment ecosystem. Therefore, we prioritize individuals coming from the following communities: Refugee, Neurodivergent, Single Parent, Blind or Low Vision, Deaf or Hard of Hearing, Black, Hispanic, Asian, Military Veterans, the Elderly, the LGBTQ, and Justice Impacted individuals. This position is open to candidates who reside in and have the legal right to work in the country where the job is located. Company Name: DISH Job DescriptionDepartment Summary Our Technicians deliver TV and Smart Home solutions to millions of customers. As a technician, we will train you to lead the charge for a world class customer experience, educating and connecting more Americans with every home you visit. You're the backbone of our organization and ensure an excellent customer experience. Our dedication to customer experience is paying off: in 2023, DISH earned the J.D. Power award for being #1 in Overall Customer Satisfaction for the sixth year in a row. Job Duties and Responsibilities What's in it for you? Guaranteed promotion after 6 months with a $1.00 per hour pay increase! Performance Incentives with the potential for up to $6,400 in your first year and $9,100 each following year! Paid training, paid time off & paid holidays 4-day work week with opportunities to work overtime Medical, Dental, Vision and Life Insurance packages and Health Savings Account Free DISH TV programming at a value of $114.99/month at your home, plus deeply discounted Sling TV and Boost Infinite phone plans 401(K) with company match & Employee stock purchasing program (ESPP) Tuition Reimbursement DISH-supplied van, tools, and uniforms Our greatest benefit is opportunity with over 400 of our current technician leadership starting as a technician. If you have grit and tenacity, you will grow quickly at DISH! Performance based promotions include an automatic 5% pay increase at level 2 and 10% at levels 3 and 4. What will you be doing? As a Field Technician, you will be representing DISH in customers' homes daily. We build our value by simplifying lives and using the DISH install to consult homeowners on their infinite smart home possibilities. Skills, Experience and Requirements All technicians must have: Aptitude to build rapport quickly. We want you to have a great time servicing our clients Ability to work at heights, including ladders up to 40 feet, and in all weather conditions Ability to lift over 70 lbs A valid driver's license in the state you are seeking employment with a driving record that meets DISH's safety standard Travel may be required Salary Range Compensation: $20.25/Hour Compensation and Benefits From versatile health perks to new career opportunities, check out our benefits on our careers website. Employment is contingent on successful completion of a pre-employment screen, to include a drug test and an acceptable driving record. Compensation listed may reflect a combination of hourly pay rate and location pay differential.

Min USD $16.50/Hr. Max USD $24.82/Hr. PRN Day & Evening shift Every other weekend Registers, orders, labels specimens with appropriate barcode labels and receives all lab specimens arriving at MMC Lab for both inpatient, outpatient, and outreach services. Evaluates specimen received verses testing ordered and confirms specimen collection was accurate and specimens are labeled with appropriate patient identifiers. Recognizes critical "stat" specimens compared to routine testing. Understands all aspects of lab safety regarding specimen handling and processing. Ensures patient demographic, insurance and diagnosis information is correctly entered into MMC registration systems to ensure billing ins accurate and results are provided to the ordering provider. Embodies the Memorial Health System Performance Excellence Standards of Safety, Courtesy, Quality, and Efficiency that support our mission, vision and values. Qualifications Education: High school diploma or equivalent. Other Knowledge/Skills/Abilities: Strong organizational skills. Basic communication skills required. Knowledge of insurance policy numbers and diagnosis coding definitions helpful. Knowledge of Medical Terminology. Knowledge of laboratory test codes and testing requirements. Demonstrate the ability to type and use a keypad. Moderate physical effort. Responsibilities Interprets, orders, and generates barcode labels from the Lab LIS system and applies labels to appropriate specimen tubes and collection containers. Must be able to interpret many different physician orders and requests to include over 1800 lab tests and select the appropriate orderable code in the Lab LIS system. Removes biological specimens from biohazard bags including blood, urine, bone marrow, body fluids, and tissue specimens. Understand all different types of collection media, preservatives, and risks of exposure to infectious agents. Handles both infectious A and B substances with appropriate CDC, and IDPH guidelines. Ability to determine if specimen was collected in appropriate collection container and media. Understands steps to resolve collection issues to ensure patient testing is performed or recollected. Receives all calls arriving in the laboratory from providers, clients, nurses, management, and patients. Logs calls in tracking software, answers all questions pertaining to phlebotomy draws, specimen collection, transport of specimens, provides lab results, supply requests, forensic autopsy cases, and administrative questions. Escalates callers to management or technical departments when necessary if unable to resolve all question Correctly enters outpatient and non-patient demographic, insurance, and diagnosis information into the hospital registration system, answering all questions in each field and updating any information that is not current. Understands insurance policy numbers and carrier codes including client account versus patient insurance billing. Recognizes valid diagnosis codes and follows appropriate resolution on any noncompliant codes. Embodies the Memorial Health System Performance Excellence Standards of Safety, Courtesy, Quality, and Efficiency that support our mission, vision and values: SAFETY: Prevent Harm - I put safety first in everything I do. I take action to ensure the safety of others. COURTESY: Serve Others - I treat others with dignity and respect. I project a professional image and positive attitude. QUALITY: Improve Outcomes - I continually advance my knowledge, skills and performance. I work with others to achieve superior results. EFFICIENCY: Reduce Waste - I use time and resources wisely. I prevent defects and delays. Monitors the printing of physician reports for inpatients and outpatients. Separates lab reports for delivery to the correct ordering provider or client site to ensure providers receive lab results in a timely manner. Communicates requests for specimen collection to phlebotomists in a timely and appropriate manner. Works closely with phlebotomy staff and managers to organize and facilitate inpatient and outpatient phlebotomy requests. Inputs all faxed orders into the lab orders database, questioning any illegible order, calls physician's office with clarification of test order and patient demographics and order request (standing or one time). Follows all instructions on provider order including, add on testing and testing cancelations. Understands how to handle a verbal order request from a provider and documents correctly. Schedules all fine needle aspirates and biopsies as requested by clinicians, ensures a pathologist is dispatched when clinician is ready to perform procedure. Processes all slide and block requests for internal and external consultations, including preparing appropriate paperwork, requesting material, pathologist review and sign off, shipping, and material returns. Assists with the preparation of slides and blocks for sendout testing. Contribute to departmental operations by performing other related duties as may be required and/or assigned. Monitors the laboratory computer system operations menu to ensure all operations are running and respond to the appropriate prompts to print daily reports. Notify appropriate computer operations staff concerning exceptions. Maintains and scans patient records according to government regulations and accreditation guidelines. Ensures that professional and personal activities conform to Memorial Medical Center strategic plan and philosophy regarding the Guest Relation Program. Performs other related work as required or requested. The intent of this job description is to provide a representative summary of the major duties and responsibilities performed by incumbents of this job. Incumbents may be requested to perform tasks other than those specifically presented in this description.

Founded in 1985, ATS is a company with a presence in the United States, Mexico and the United Kingdom. We are professionals in Industrial Maintenance and we make factories run better. Fundada en 1985, ATS es una empresa con presencia en los Estados Unidos, México y el Reino Unido. Somos profesionales en mantenimiento industrial y hacemos que las fábricas funcionen mejor. Principal Duties/Responsibilities: · Performs expert level break-fix & preventative maintenance. This includes but is not limited to: observing devises in operation to location root cause of problem; dismantling devices to gain access to and remove defective parts; examining parts to detect imperfections; adjustment of functional parts of devices and control instruments; repair and/or replacement of defective parts; testing of device to observe performance; and performing tests for electrical circuitry and mechanical systems; reconditioning and repairing machine tools. · Identifies and sources parts, supplies and repair items as necessary. Performs evaluations of alternatives to improve cost and / or reliability of equipment. · Independently performs maintenance as per industry standards. · Works with customer counterparts to optimize maintenance, reliability, and preventative maintenance procedures. · May be required to setup and operate multiple machining operations including but not limited to: lathe, drill press, grinder, and other metalworking tools to make and repair parts. May perform welding tasks. · Conforms and complies with customer contractor codes of conduct, housekeeping standards, and safety processes · Documents work performed in service reports, applicable management systems, and written explanation regarding observation and collected equipment performance data. · Provides assistance to lower level technicians and leadership to project teams. Performs expert functions as a part of training and development. · Troubleshoots and analyzes complex control systems to resolve in-depth software/ hardware and configuration problems. · Utilizes advanced maintenance technologies to collect equipment performance data. Observes trends and makes recommendations. · Completes and conducts on-the-job training and technical self-study programs for career development. · Follows all safety related policies, rules, regulations, technical instructions and guidelines. Situational awareness and identify unsafe behaviors and conditions. Knowledge, Skills, Abilities (KSAs), & Competencies: Essential KSAs: · High School Graduate or equivalent (GED). · Associates degree with a Technical focus and 10 years of related experience in specific industry; or, 12 years of experience in specific industry. · Possesses comprehensive understanding of electrical, mechanical, fluid power and control systems. Can analyze the problem, synthesize alternative solutions, and perform repairs. · Must be able to use basic hand tools and specialized tools as appropriate. · Extensive travel required. (Local, National). Applicants can live anywhere within the Continental U.S Desirable KSAs: · Experience in condition based maintenance techniques, precision mechanical alignments, and maintenance of applicable process equipment. · Experience in programmable logic controllers, field device troubleshooting, and maintenance of electrical drive and motor systems. Competencies: · Communications · Customer Focus · Personal Discipline · Safety Physical Demands and Working Conditions: While performing the duties of this job, the employee is regularly required to stand; walk; use hands/fingers to handle, or feel; reach with hands and arms; climb, ascend/descend or balance to heights that may require a ladder or lift; stoop, kneel, crouch, or crawl in confined spaces; and talk or hear. The employee is occasionally required to sit. The employee must occasionally lift and/or move more than 50 pounds. The employee is regularly required to use close vision and color vision. The employee is occasionally exposed to outside weather conditions and risk of electrical shock. Work is typically performed in a factory environment and is usually very loud. In the factory environment, the employee may be exposed to hazardous materials and/or greasy or slippery factory floors. ATS is committed to providing equal employment opportunities in all aspects of employment to all applicants and employees without regard to age, color, race, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, disability, veteran status, genetic information, or other legally protected status. Review the privacy policy here. ATS se compromete a brindar igualdad de oportunidades de empleo en todos los aspectos del empleo a todos los solicitantes y empleados, independientemente de su edad, color, raza, religión, sexo (incluido el embarazo, identidad de género y orientación sexual), origen nacional, discapacidad, estatus de veterano, información genética u otro estatus legalmente protegido. Revisión de la política de privacidad aquí here.

Dürr CTS (Clean Technology Systems) develops advanced environmental technologies to make industrial production cleaner, safer, and more efficient. Across all our product lines, Dürr CTS offers responsive, local, and skilled service teams, delivering customer-focused support in maintenance, troubleshooting, spare parts, and plant modifications. Since November 1st, 2025, Dürr CTS has operated independently, with 1,300 employees across 12 countries. We provide reliable and innovative environmental technology solutions, helping customers worldwide meet their regulatory and sustainability goals. Our Portfolio Includes: Air Pollution Control: thermal oxidation, sorptive processes, particulate matter separation Noise Abatement: Silencer products, filtration, gas turbine inlet and exhaust systems by Dürr Universal Decentral Power Generation: Organic Rankine Cycle systems with Cyplan ORC We serve a wide range of industries, including chemical, pharmaceutical, food, automotive, energy, surface coating, and many more, providing tailored solutions that help customers meet environmental regulations, reduce emissions, ensure operational reliability, and improve sustainability. We're Looking for People Who: Can be the face of our company to our customers Love to travel and experience new work environments Enjoy navigating challenges that require you to think on your feet Have a high mechanical aptitude Crave personal development and improvement What We Do: Durr Universal provides noise and environmental solutions to our customers. For more than 65 years, we have supported our customers through our design, manufacturing, and installation of acoustic and emissions systems. We work to continually improve our knowledge of our equipment, our customers' processes, and how the two interact. Why We're in Business: Durr Universal provides value-added solutions to our customers. We pride ourselves on the thoroughness of our pre-sale consultation and solution development, the quality and longevity of our equipment, and our best-in-class service from initial customer inquiry through the life of the equipment. We seek long-term partnerships with customers that value our approach. This position will oversee all activities of both Durr Universal internal and Field Service contractors and report on the performance of the department functions with appropriate personnel in the company. This position will require working with the Field Service Technicians, Project Managers, Sales, Engineering, 3rd party Contractors, and site customers to ensure overall contract requirements are successfully met for field service work, warranty repair, quality inspection, and technical supervision. This position requires travel from 70% to 90% to various potential customer sites to assist in quoting, supervision, auditing, inspection, etc. of dedicated Field Service Teams, along with assisting and overseeing field service project work scopes and related scopes. The Field Service Supervisor/TFA must plan, organize, direct, and manage the work of individual field service technicians and contractors in various field operations. Essential Functions: Put safety first in everything you do and help ensure our colleagues, customers, and business partners remain safe at all times. Be the liaison between the customer, contractor, and Dürr staff Assist in the installation of Dürr and other equipment Manage all 3rd party subcontractors, ensure work is done safely, properly, and on time and in budget. Work with site personnel and internal personnel on project issues and resolve them effectively. Develop cost estimates and customer proposals for field installation projects. Creation and deployment of mobilization schedules for the field service department. Assist in equipment commissioning and documentation as required Participate in contract reviews and kick-off meetings involving the field service scope of work. Assist with parts procurement as needed When required provide customer training on installed equipment Provide equipment modular build support as required Experience and Skills: Must make safety a priority every day AWS Certified Welding Inspector (CWI) is a plus Painting and coatings certification/ experience is a plus OSHA 10 or 30 Hour Safety Trained Familiar with MS Word, Excel, and PowerPoint Desire to travel Ability to read and interpret engineering drawings and technical documents (i.e. layout, sectional drawings) Excellent written and verbal communication skills Desire to work hands-on in an industrial environment Proven mechanical aptitude - including the use of various machining tools, welding equipment and methods, and various testing equipment Demonstrated experience with installation and inspection of large steel structures (ducting and tall stacks, steel platforms) and their welding processes, inspection of welds, and industrial coatings Working experience with safe lifting & rigging methods Fully capable with Microsoft Office software package Flexible to adapt to same-day and next-day changes Ideal candidate will have experience developing RFQ/RFPs for work that would be subcontracted to 3rd party vendors. Experience with steel fabrication and custom equipment manufacturing. Position can be located anywhere near a major airport Dürr CTS, Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. We maintain a drug-free workplace and perform pre-employment drug and alcohol testing. Note to all Staffing Agencies: Dürr CTS, Inc. has a team of dedicated Human Resources professionals who are responsible for all hiring needs. Our practice is to partner and work with our approved vendors on an as-needed basis. We do not accept resumes from agencies that are not on our preferred vendor list and have not signed our Recruiting and Permanent Placement Contract. Any resumes submitted from unapproved vendors will be considered unsolicited, and Dürr will not be obligated to pay a referral fee.

Onsite Contract W2 only In this role you will be working in a team environment to help build out new and existing datacenters on a project basis. The right candidate will have at least a year of experience working in a datacenter and be familiar with various types of hardware and network devices. You will be responsible for cable labeling, installation/patching and management. This position offers the chance to work for one of the most elite names in the Technology space with the potential for a full-time opportunity. The following experience will ensure you are a good match: 1+ year working in a Datacenter Experience labeling, managing and cabling network devices Abily to work on your own with Management direction