Vehicle controls engineer full time jobs

This dual product/customer focused position acts as technical liaison between the Cummins field service organization and the Engineering, Quality, and Manufacturing organizations to proactively identify, define, and prioritize product issues and to implement both short-term and long-term solutions. In this role, you will make an impact in the following ways: + Investigates product test system and process problems, understands causal mechanisms, recommends appropriate action, may include activities in problem resolution and documents results with guidance from more experienced team members. + Applies and supports product problem solving processes such as the seven-step problem solving approach and tools such as the product development roadmap to enable high-quality repair events. + May support preparing the service channel for efficient service events, confirming that parts and special tools are available, service information (including diagnostics) is accurate and translated, and special care is ready for customers of new products. + Collaborates with technical experts in failure analysis and data trends to implement final product resolutions to reduce customer downtime. + May support large-scale development or issue resolution projects. + May include activities in problem resolution for moderately complex components, products, systems, subsystems, or services. + Supervised execution of established work processes and systems, while still developing technology or product knowledge; engages with the improvement of systems and processes. + No direct management of people but could involve limited coordination of work amongst engineers and technicians. + Contributes effectively toward team goals and develops proficiency in the competency areas critical to success in the role. RESPONSIBILITIES To be successful in this role you will need the following: + Field Investigation and Support + Technical Service Information + Product Serviceability Requirements and Review + Product Failure Reporting and Corrective/Preventive Action Systems + Product Failure Mode Avoidance + Product Problem Solving + Technical Customer Management + Decision Quality + Drives Results + Collaborates + Communicates Effectively + Self-Development Degree Programs Considered: Bachelor's, Master's, PhD Major Programs Typically Considered: All Engineering Majors QUALIFICATIONS 2025 Monthly Salary Range by Degree Level: + Bachelor's - $3,500 - $4,400 + Master's - $5,600 + PhD - $5,800 Please note that the salary range provided is a good faith estimate of the applicable range. The final salary offer will be determined after considering relevant factors, including a candidate's qualifications and experience, where appropriate. Co-Op program criteria: + Must be a full-time enrolled student pursuing an undergraduate or graduate degree at an accredited U.S. college/university + Minimum 2.5 or above GPA preferred + Must be able to complete a minimum of 4-months to 6-months or a maximum of a 12-months commitment + Must be able to complete 40 hours per week + Willingness to learn from others on the job + Must be currently residing within the continental U.S. Cummins and E-verify At Cummins, we are an equal opportunity and affirmative action employer dedicated to diversity in the workplace. Our policy is to provide equal employment opportunities to all qualified persons without regard to race, gender, color, disability, national origin, age, religion, union affiliation, sexual orientation, veteran status, citizenship, gender identity and/or expression, or other status protected by law. Cummins validates the right to work using E-Verify. Cummins will provide the Social Security Administration (SSA) and, if necessary, the Department of Homeland Security (DHS), with information from each new employee's Form I-9 to confirm work authorization. Ready to think beyond your desk? Apply for this opportunity to start your career with Cummins today. careers.cummins.com Not ready to apply but want to learn more? Join our Talent Community to get the inside track on great jobs and confidentially connect to our recruiting team: ****************************** Job Engineering Organization Cummins Inc. Role Category On-site with Flexibility Job Type Student - Cooperative/12 Month Placement ReqID 2422779 Relocation Package No 100% On-Site No Cummins and E-Verify At Cummins, we are an equal opportunity and affirmative action employer dedicated to diversity in the workplace. Our policy is to provide equal employment opportunities to all qualified persons without regard to race, gender, color, disability, national origin, age, religion, union affiliation, sexual orientation, veteran status, citizenship, gender identity and/or expression, or other status protected by law. Cummins validates the right to work using E-Verify and will provide the Social Security Administration (SSA) and, if necessary, the Department of Homeland Security (DHS), with information from each new employee's Form I-9 to confirm work authorization. Visit *************** to know your rights on workplace discrimination.

Company: JSET Automated Technologies About Us JSET Automated Technologies is a fast-growing company specializing in Building Management Systems (BMS) and Electrical Power Monitoring Systems (EPMS). We design, build, and commission reliable, code-compliant systems for data centers and other mission-critical environments. Our team values hands-on learning, precision, and collaboration, giving every employee the opportunity to make an immediate impact. What You'll Do Support the successful delivery of EPMS projects under the direction of a Project Engineer Develop Ignition/EPMS applications based on technical documentation or customer specifications Configure, program, and test CodeSys (WAGO) controllers to meet project requirements Integrate and troubleshoot communication protocols such as Ethernet/IP, Modbus, and BACnet Assist with commissioning activities to ensure system reliability and compliance Act as a technical subject matter expert during customer and vendor meetings Analyze and resolve system issues in live, mission-critical environments Maintain accurate project documentation in Procore Follow all site safety requirements and best practices What You'll Bring Bachelor's degree in Electrical Engineering, Computer Science, Systems Engineering, or a related field Strong experience in Ignition design, development, and deployment Hands-on experience with CodeSys programming for WAGO PLCs Working knowledge of industrial communication protocols (Modbus, Ethernet/IP) Familiarity with control panel layouts, wiring diagrams, and electrical schematics Proficiency in Microsoft Office (Word, Excel, Project) Strong communication skills and attention to detail Ability to work independently and within a project team Preferred Qualifications Ignition Core or Gold Certification Experience with Python scripting or SQL integration Prior work experience in data centers or other mission-critical facilities Understanding of SCADA architecture and design standards ITAR-compliant work status (preferred) Why Join JSET Competitive compensation with bonus potential 401(k) with employer match Health, dental, and vision insurance Paid time off and professional development support A collaborative team focused on growth, quality, and long-term success Take the next step in your career - join JSET Automated Technologies and help build smarter, more reliable systems. Applicants must be currently authorized to work in the United States on a full-time basis. We are not able to sponsor or assume sponsorship of employment visas now or in the future for this role. As a condition of employment, all employees must complete a background and drug screening

Veregy is an award-winning NAESCO-Accredited decarbonization company focusing on accelerating and simplifying the Energy Transition. We provide turnkey engineering and construction services designed to reduce our clients' energy and operating costs through the implementation of energy efficiency and infrastructure upgrades, smart building technology, fleet EV infrastructure, clean energy generation, and sustainability. Do you want to be part of a TEAM who delivers Eco-Friendly Environments that Transform Lives? Then you are in the right place…start the application process today! Summary of Position Functions The Controls Engineer will quickly gain an understanding and working knowledge of Veregy's technology products and building automation systems. The engineer will utilize this understanding to design, implement, and optimize building automation systems that control various commercial systems including HVAC, lighting, access control, etc. The engineer will optimize control sequences to reduce energy consumption and increasing facility wide energy efficiency. The engineer will also be responsible for managing project implementation which may include managing sub-contractors, project scheduling, progress reporting, and budget management. Essential Position Functions Assist with and manage building automation implementation projects by leading progress meetings, supervising subcontractors, ordering material, and managing budgets. Assist engineering and project teams with design, programming, and commissioning of building automation systems Write and optimize building automation control sequences to reduce energy consumption in increase facility efficiency Assist project teams with the creation of design and construction documents as they relate to building automation systems and other Veregy technology products Troubleshoot low voltage circuitry in the field and verify functional requirements are met Respond to and rectify customer issues or occupant comfort complaints in a timely manner Experience in project management. Strong analytical skills and problem-solving capabilities. Detail-oriented multi-tasker. Excellent written, verbal, and diplomatic communication skills. Strong collaborative skills; ability to collaborate with other engineers to methodically solve complex problems. Outgoing, energetic self-starter. Proficient in Microsoft Office products and experience with at least one CAD software. Experience with Honeywell, Distech, JCI, or other Commercial Building Automation Systems. Experience with Tridium/Niagara preferred. Educational/Certification Requirement Bachelor of Science in Engineering - Mechanical, Electrical, or Software. Required Experience 5 + years in building automation system design and implementation. Project management experience. Work environment This position requires work to be accomplished in both an office and field/construction environment. Physical demands This position requires sitting for periods of time at a computer with the freedom to walk around office when necessary; occasional phone, copy machine, and other office machine use; participate in teleconferences using a headset/earpiece, and lifting to 50 lbs. as needed. Travel required May require some travel. Other duties Please note this is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. Benefits Competitive Compensation. Paid Holidays, Paid Sick Leave, and Paid Time Off. Competitive Medical, Dental and Vision Plans. 401k Retirement Plan with Matching Employer Contributions (%). Employer Sponsored Life Insurance and AD&D Insurance. Employer Paid Short- and Long-Term Disability Insurance. Continued Education and Trade Certification Sponsorship (Specific Positions). Applicants must be currently authorized to work in the United States on a full-time basis. Applicants must be currently authorized to work in the United States on a full-time basis. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Equal Employment Opportunity has been, and will continue to be, a fundamental principle at Veregy, where employment is based upon capabilities and qualifications without discrimination because of race, color, religion, sex, age, national origin, disability, veteran status, genetic history, sexual orientation, or any other protected characteristic as established by law.

Intermediate Controls Engineer - Hybrid - Columbus, Ohio We're seeking a full-time controls engineer to join our expanding team and contribute to the design, programming, and management of automation projects in the pharmaceutical and food & beverage industries. LAPORTE is a consulting engineering firm which has been in business for 25 years. Today, the company has 25 offices across North America and Europe, and over 480 employees with a passion for engineering. Join us for a competitive salary, compensatory PTO, comprehensive benefits, and a supportive work environment that emphasizes professional growth. We believe in a flexible working environment that values work-life balance while encouraging efficiency and creativity on a daily basis. The Controls Engineer will: Lead and support the design of automation projects, developing specifications for control panels, networks, and software (primarily Allen-Bradley PLC/PACs and Factorytalk View ME/SE HMI and SCADA). Translate process or packaging applications into detailed construction packages for control panel designs and electrical installation scopes. Construction packages typical include equipment arrangement drawings, schematics, wiring diagrams, cable schedules, control panel drawings, etc. Mentor and supervise project team members, enhancing team collaboration and project execution. Provide comprehensive lifecycle support for projects, including system design, troubleshooting, testing, and commissioning. Perform site surveys and offer hands-on support during installation, focusing on control system deployment. Adhere to and ensure compliance with relevant codes (UL508A, NEC) and standards. Engage in diverse projects, enhancing your engineering and project management skills. Travel expectations are dependent on specific project requirements by typically require 1-3 days for an initial site visit and then a return trip to lead commissioning efforts which may take 1-4 weeks. Overall travel is anticipated to be 20-40%. Qualifications Bachelor's degree in chemical engineering, Mechanical Engineering, Electrical Engineering, or Electrical Engineering Technology. 2-6 years of experience in control systems, manufacturing, or consulting-design environments including experience commissioning systems, preferably as a lead. Proficient in automation project tasks including design, client coordination, and bid package preparation. Skilled in control panel and network design, instrument selection, and control system programming. Proficiency with AutoCAD for control panel design and electrical construction packages. Familiarity / Experience with electrical engineering construction packages - single line diagrams, panel schedules, power plans, etc. Hands-on experience surveying existing control installations and preparing as-built conditions of systems. Experience surveying and planning control systems projects without support of a manager. Hands-on experience with Rockwell Automation software-Studio 5000 / RSLogix 5000 for PLC programming and FactoryTalk View ME / SE for HMI and SCADA development. Send us your application today. We look forward to meeting you! The LAPORTE team

Veregy is an award-winning NAESCO-Accredited decarbonization company focusing on accelerating and simplifying the Energy Transition. We provide turnkey engineering and construction services designed to reduce our clients' energy and operating costs through the implementation of energy efficiency and infrastructure upgrades, smart building technology, fleet EV infrastructure, clean energy generation, and sustainability. Do you want to be part of a TEAM who delivers Eco-Friendly Environments that Transform Lives? Then you are in the right place…start the application process today! Summary of Position Functions The Controls Engineer will quickly gain an understanding and working knowledge of Veregy's technology products and building automation systems. The engineer will utilize this understanding to design, implement, and optimize building automation systems that control various commercial systems including HVAC, lighting, access control, etc. The engineer will optimize control sequences to reduce energy consumption and increasing facility wide energy efficiency. The engineer will also be responsible for managing project implementation which may include managing sub-contractors, project scheduling, progress reporting, and budget management. Essential Position Functions Assist with and manage building automation implementation projects by leading progress meetings, supervising subcontractors, ordering material, and managing budgets. Assist engineering and project teams with design, programming, and commissioning of building automation systems Write and optimize building automation control sequences to reduce energy consumption in increase facility efficiency Assist project teams with the creation of design and construction documents as they relate to building automation systems and other Veregy technology products Troubleshoot low voltage circuitry in the field and verify functional requirements are met Respond to and rectify customer issues or occupant comfort complaints in a timely manner Experience in project management. Strong analytical skills and problem-solving capabilities. Detail-oriented multi-tasker. Excellent written, verbal, and diplomatic communication skills. Strong collaborative skills; ability to collaborate with other engineers to methodically solve complex problems. Outgoing, energetic self-starter. Proficient in Microsoft Office products and experience with at least one CAD software. Experience with Honeywell, Distech, JCI, or other Commercial Building Automation Systems. Experience with Tridium/Niagara preferred. Educational/Certification Requirement Bachelor of Science in Engineering - Mechanical, Electrical, or Software. Required Experience 5 + years in building automation system design and implementation. Project management experience. Work environment This position requires work to be accomplished in both an office and field/construction environment. Physical demands This position requires sitting for periods of time at a computer with the freedom to walk around office when necessary; occasional phone, copy machine, and other office machine use; participate in teleconferences using a headset/earpiece, and lifting to 50 lbs. as needed. Travel required May require some travel. Other duties Please note this is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. Benefits Competitive Compensation. Paid Holidays, Paid Sick Leave, and Paid Time Off. Competitive Medical, Dental and Vision Plans. 401k Retirement Plan with Matching Employer Contributions (%). Employer Sponsored Life Insurance and AD&D Insurance. Employer Paid Short- and Long-Term Disability Insurance. Continued Education and Trade Certification Sponsorship (Specific Positions). Applicants must be currently authorized to work in the United States on a full-time basis. Applicants must be currently authorized to work in the United States on a full-time basis. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Equal Employment Opportunity has been, and will continue to be, a fundamental principle at Veregy, where employment is based upon capabilities and qualifications without discrimination because of race, color, religion, sex, age, national origin, disability, veteran status, genetic history, sexual orientation, or any other protected characteristic as established by law.

Job Title: Design Engineer Employment Type: Full-Time Department: Engineering Axionova Engineering Limited is an established leader in the civil engineering industry, recognized for delivering innovative and reliable solutions across multiple sectors. Our team is driven by a commitment to excellence and a passion for designing systems that address complex challenges. We are excited to invite a Design Engineer to join our forward-thinking team to contribute to our ambitious projects and high standards of quality and efficiency Position Overview: Axionova Engineering Limited is seeking a knowledgeable and detail-oriented Design Engineer to join our engineering team. The ideal candidate will have a strong foundation in engineering, with a specialization in system design and process improvement. This role focuses on evaluating and optimizing our systems and equipment, designing new processes, and ensuring that engineering projects meet our standards for quality, cost-effectiveness, and functionality. Key Responsibilities: - System and Process Analysis: Review and assess existing systems and processes, identifying areas for improvement and recommending streamlining opportunities. - Equipment and Process Design: Evaluate current equipment and design new processes or systems that meet Axionovas needs in terms of output, cost, and quality. - Cost Reduction: Make informed recommendations on new systems or designs that could help reduce production and operational costs. - Project Collaboration: Partner with the engineering team to bring designs to fruition, ensuring that equipment and processes align with project requirements. - Project Management: Oversee installation projects, ensuring timely and cost-effective completion while maintaining efficiency and adherence to budgets. - Health and Safety Compliance: Ensure all designs and implementations align with health and safety guidelines, maintaining a safe work environment. - Goal Achievement: Work toward key performance indicators (KPIs) and objectives set by executives, aligning your work with Axionova's strategic goals. Qualifications and Requirements: - Educational Background: Bachelors degree (or higher) in Engineering or a related field. - Experience: Demonstrated experience in a similar design engineering role. - Technical Proficiency: Ability to read, interpret, and execute technical drawings and diagrams accurately. - Project Management Skills: Proven ability to effectively manage engineering projects, from concept to completion. - Analytical Skills: Strong analytical and problem-solving abilities, with meticulous attention to detail. - Communication Skills: Excellent written and verbal communication skills for clear documentation and effective teamwork. - Manufacturing Knowledge: Familiarity with manufacturing processes, machinery, and equipment. - Time Management: Ability to prioritize tasks and manage workload to meet deadlines. - Reporting Skills: Proficient in report writing, conveying project updates and recommendations effectively. Why Join Axionova Engineering Limited? - Opportunity to work with a team of industry leaders. - Competitive compensation and benefits package. - Commitment to continuous learning and professional development. - A role in shaping cutting-edge engineering solutions for various industries. Apply Today If you're a dedicated professional with a passion for engineering innovation and excellence, we encourage you to apply and become part of Axionova Engineering Limited's mission to set new standards in engineering.

McGill AirClean, a subsidiary of United McGill, has about 50 years experience solving air pollution control problems for a large variety of industrial sources, including furnaces, boilers, incinerators, kilns and dryers, and providing pressure processing equipment such as autoclaves and vacuum dryers for many industries. The Associate will install, test, service and repair new and existing air pollution control systems and pressure processing equipment, such as autoclaves and vacuum dryers, and provide technical assistance and training to the customers. Qualifications include: two year degree in electrical engineering technology, working knowledge of PLC programming, electrical or electronics troubleshooting experience, excellent communication skills, and ability to work extended hours and travel approximately 40% to 60% anywhere in North America. The Company offers competitive pay and benefits including: medical/Rx drugs, dental and vision care, Health Savings Account (HSA), Paid Time Off (PTO) and paid Holidays, 401k Plan with Company matching contributions and paid disability and life insurance.

Ready to be pushed beyond what you think you're capable of? At Coinbase, our mission is to increase economic freedom in the world. It's a massive, ambitious opportunity that demands the best of us, every day, as we build the emerging onchain platform - and with it, the future global financial system. To achieve our mission, we're seeking a very specific candidate. We want someone who is passionate about our mission and who believes in the power of crypto and blockchain technology to update the financial system. We want someone who is eager to leave their mark on the world, who relishes the pressure and privilege of working with high caliber colleagues, and who actively seeks feedback to keep leveling up. We want someone who will run towards, not away from, solving the company's hardest problems. Our ******************************** is intense and isn't for everyone. But if you want to build the future alongside others who excel in their disciplines and expect the same from you, there's no better place to be. While many roles at Coinbase are remote-first, we are not remote-only. In-person participation is required throughout the year. Team and company-wide offsites are held multiple times annually to foster collaboration, connection, and alignment. Attendance is expected and fully supported. The Coinbase Customer Experience (CX) organization plays an imperative role in achieving our mission. Our team is dedicated to eliminating compliance challenges, empowering our customer experience via self-service and automation, and optimizing customer support interactions to build an effortless experience. As a Senior Data Analyst on our team, you will own and drive projects that create meaningful business impact. You'll have the opportunity to transform data into valuable business insights and help shape our strategy to deliver maximum impact to our customers, while also heavily influencing strategy, planning, and execution. *What you'll be doing (ie. job duties):*** * Improve customer experiences by developing bar raising metrics, self-service tools, and deep analyses that drive actionable insights * Collaborate with stakeholders to manage a long-term analytic roadmap that balances the tactical and strategic needs of the business * Proactively identify opportunity areas for improvement including deep dive investigations and processes to better serve our customers * Drive the vision, building, and adoption of self-service analytic capabilities; develop these capabilities at scale * Understand data resources and know when, how, and which best to use for each project * Ability to frame and break down complex business problems into key components and recommend practical solutions * Monitor key performance metrics and use data to identify actionable opportunities to increase efficiency and make high-quality decisions that drive performance improvements * Build a collaborative team environment that fosters efficient execution, innovation, and continuous improvement * Develop and support the analytical technologies that give our team timely, flexible, and structured access to their data *What we look for in you (ie. job requirements):*** * 5+ years of relevant experience * Advanced SQL and data modeling skills, Python experience a plus * Proven track record of data analysis, reporting and visualization (Looker, Tableau, QuickSight, etc.) * Excellent written and verbal communication skills are required, including experience meeting with and communicating information to senior leadership * Highly collaborative, with an ability to optimally secure inputs from many cross-functional partner teams * Ability to think strategically, formulate appropriate analytical solutions, and execute in order to solve business needs *Nice to haves:* * Report automation experience (e.g. using Python, R) * Knowledge of AWS services and cloud computing * Experience with descriptive and inferential statistics * Experience with product analytics * Experience with customer support metrics/data P72836 \#LI-Remote *Pay Transparency Notice:* Depending on your work location, the target annual salary for this position can range as detailed below. Full time offers from Coinbase also include bonus eligibility + equity eligibility**+ benefits (including medical, dental, vision and 401(k)). Pay Range: $167,280-$196,800 USD Please be advised that each candidate may submit a maximum of four applications within any 30-day period. We encourage you to carefully evaluate how your skills and interests align with Coinbase's roles before applying. Commitment to Equal Opportunity Coinbase is proud to be an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, creed, gender, national origin, age, disability, veteran status, sex, gender expression or identity, sexual orientation or any other basis protected by applicable law. Coinbase will also consider for employment qualified applicants with criminal histories in a manner consistent with applicable federal, state and local law. For US applicants, you may view the *********************************************** in certain locations, as required by law. Coinbase is also committed to providing reasonable accommodations to individuals with disabilities. If you need a reasonable accommodation because of a disability for any part of the employment process, please contact us at accommodations*********************************** *Global Data Privacy Notice for Job Candidates and Applicants* Depending on your location, the General Data Protection Regulation (GDPR) and California Consumer Privacy Act (CCPA) may regulate the way we manage the data of job applicants. Our full notice outlining how data will be processed as part of the application procedure for applicable locations is available ********************************************************** By submitting your application, you are agreeing to our use and processing of your data as required. *AI Disclosure* For select roles, Coinbase is piloting an AI tool based on machine learning technologies to conduct initial screening interviews to qualified applicants. The tool simulates realistic interview scenarios and engages in dynamic conversation. A human recruiter will review your interview responses, provided in the form of a voice recording and/or transcript, to assess them against the qualifications and characteristics outlined in the job description. For select roles, Coinbase is also piloting an AI interview intelligence platform to transcribe and summarize interview notes, allowing our interviewers to fully focus on you as the candidate. *The above pilots are for testing purposes and Coinbase will not use AI to make decisions impacting employment*. To request a reasonable accommodation due to disability, please contact accommodations[at]coinbase.com

**Requisition ID:** 174775 **Job Level:** Mid Level **Home District/Group:** Kiewit Power Engineering **Department:** Design Engineering **Market:** Power **Employment Type:** Full Time We are currently looking for motivated Substation Designer/Drafter to join our growing Substation and Transmission Line Design team. As part of the team of highly specialist design professional, you will support variety of substation, transmission and distribution project ranging from 12kv to 500kV. We are supporting both engineering design and EPC projects for clients throughout the country. **Location** This position is based out of our office in Columbus, OH. **Responsibilities** - Work with Engineers and Designer to develop the design documents and drawings for Substation or Transmission Line project. - Create design/construction drawing package for substation design project including substation general plan, elevation and detail, bill of material, conduit and cable schedule. - Provide drafting support for various type of substation project including physical, electrical and protection and control design. - Utilize company standards, client standards, and/or Engineering direction to produce new drawings and update existing drawings utilizing AutoCAD, Microstation or PLS-C ADD - Maintain document management system with quality data. - Train, develop and mentor the less-experienced design team members - Perform quality control checks and provide feedback to team members **Qualifications** - At least 5 years' experience in design and/or drafting disciplines with a background in electrical substation, civil /structural or transmission line design - Minimum GED Diploma with drafting or electrical design training. Bachelor's degree in Drafting/Design preferred - Extensive knowledge of AutoCAD or Microstation - Ability to work in a growing, adaptive and multi-discipline team environment - Ability to work independently with limited direction and oversight - Legally able to work within the United States for any length of time - Strong written and verbal communication skills; fluent in English language Other Requirements: + Regular, reliable attendance + Work productively and meet deadlines timely + Communicate and interact effectively and professionally with supervisors, employees, and others individually or in a team environment. + Perform work safely and effectively. Understand and follow oral and written instructions, including warning signs, equipment use, and other policies. + Work during normal operating hours to organize and complete work within given deadlines. Work overtime and weekends as required. + May work at various different locations and conditions may vary. We offer our fulltime staff employees a comprehensive benefits package that's among the best in our industry, including top-tier medical, dental and vision plans covering eligible employees and dependents, voluntary wellness and employee assistance programs, life insurance, disability, retirement plans with matching, and generous paid time off. Equal Opportunity Employer, including disability and protected veteran status. Company: Kiewit

$120K-$140K + ESOP Ownership + Overtime Pay Join our client-a 100% employee-owned engineering firm where you'll lead hydrologic and hydraulic design on impactful public infrastructure projects across the Midwest. From pedestrian enhancements to major highway reconstructions, you'll work on projects that improve real communities-with the autonomy to shape your path. What You'll Do: Design storm sewers, culverts, and bridge hydraulics Develop SWPPPs, erosion control plans, and stormwater management designs Use tools like OpenRoads, StormCAD, HEC-RAS (1D/2D), HY8, and more Mentor junior engineers and support roadway design What You'll Bring: Bachelor's in Civil Engineering or related field PE license (Ohio required) 6+ years of experience in transportation/hydraulic engineering Public works experience (DOT, municipal, or federal projects) Why? Our client is proud to be 100% employee-owned, with a turnover rate of just 2-4%-far below the industry average. They reinvest profits into their people through improved benefits, stock growth, and career development. You have a voice, ownership, and the freedom to work on projects you care about. Benefits: Salary: $120K-$140K + straight overtime after 40 hours ESOP ownership + 401(k) match Health, dental, vision, life & disability insurance PTO, holidays, parental & bereavement leave Tuition reimbursement & wellness programs

Anduril Industries is a defense technology company with a mission to transform U.S. and allied military capabilities with advanced technology. By bringing the expertise, technology, and business model of the 21st century's most innovative companies to the defense industry, Anduril is changing how military systems are designed, built and sold. Anduril's family of systems is powered by Lattice OS, an AI-powered operating system that turns thousands of data streams into a realtime, 3D command and control center. As the world enters an era of strategic competition, Anduril is committed to bringing cutting-edge autonomy, AI, computer vision, sensor fusion, and networking technology to the military in months, not years. Anduril is seeking a Sr Material Review Board (MRB) Engineer to join our Fury Launch Team (FLT) in Columbus, Ohio. The MRB Engineer will be responsible for managing disposition of nonconformances, conducting engineering analysis, and ensuring compliance with quality standards and design intent. This role is crucial for supporting production efficiency and maintaining product integrity throughout the manufacturing process. The MRB Engineer will act as the on-site technical liaison between production operations, design, and quality. **This role requires candidates to relocate to Costa Mesa for a 2-month training program, with the goal to be back in Columbus, OH fulltime by Q2 2026 depending on the candidates start date. Housing, transportation, etc. will be provided during your stay. WHAT YOU'LL DO Review and assess nonconformance reports (NCRs) and coordinate with cross-functional teams to determine the disposition of nonconforming materials. Provide dispositions for minor variance conditions on completed aircraft, major assemblies, and detail level components. Coordinate with vendor design authorities for disposition of supplier designed components. Own the Material Review Board (MRB) process for evaluating production escapes and deviations. Conduct root cause analysis on nonconformance issues, identifying underlying problems and recommending corrective actions. Support investigations and root cause analysis to ensure timely resolution of quality issues impacting production. Collaborate with engineering, production, and quality teams to ensure alignment on inspection & repair methods and compliance with relevant standards. Maintain accurate records of nonconformance cases, dispositions, and MRB activities. Prepare and present reports on nonconformance trends and metrics to management and stakeholders. Drive process improvements based on findings from nonconformance reviews, audits, and customer feedback. Participate in quality system audits to ensure compliance and identify opportunities for enhancement. REQUIRED QUALIFICATIONS Bachelors Degree in Mechanical, Aerospace, Manufacturing, or Materials Engineering 5+ years of experience in engineering roles, preferably within an aerospace or defense manufacturing environment. Excellent understanding of MRB processes and nonconformance management. Strong problem-solving and analytical skills with attention to detail. Excellent communication and interpersonal skills to work effectively with cross-functional teams. Knowledge of quality management systems (QMS) and relevant standards (e.g., AS9100, ISO9001). Experience with root cause analysis techniques and quality improvement methodologies. Must be able to obtain and hold a U.S. security clearance PREFERRED QUALIFICATIONS Previous MRB Experience Experience in design, analysis, assembly, or repair roles Experience on aircraft production line Understanding of stress analysis techniques The salary range for this role is an estimate based on a wide range of compensation factors, inclusive of base salary only. Actual salary offer may vary based on (but not limited to) work experience, education and/or training, critical skills, and/or business considerations. Highly competitive equity grants are included in the majority of full time offers; and are considered part of Anduril's total compensation package. Additionally, Anduril offers top-tier benefits for full-time employees, including: Healthcare Benefits US Roles: Comprehensive medical, dental, and vision plans at little to no cost to you. UK & AUS Roles: We cover full cost of medical insurance premiums for you and your dependents. IE Roles: We offer an annual contribution toward your private health insurance for you and your dependents. Additional Benefits Income Protection: Anduril covers life and disability insurance for all employees. Generous time off: Highly competitive PTO plans with a holiday hiatus in December. Caregiver & Wellness Leave is available to care for family members, bond with a new baby, or address your own medical needs. Family Planning & Parenting Support: Coverage for fertility treatments (e.g., IVF, preservation), adoption, and gestational carriers, along with resources to support you and your partner from planning to parenting. Mental Health Resources: Access free mental health resources 24/7, including therapy and life coaching. Additional work-life services, such as legal and financial support, are also available. Professional Development: Annual reimbursement for professional development Commuter Benefits: Company-funded commuter benefits based on your region. Relocation Assistance: Available depending on role eligibility. Retirement Savings Plan US Roles: Traditional 401(k), Roth, and after-tax (mega backdoor Roth) options. UK & IE Roles: Pension plan with employer match. AUS Roles: Superannuation plan. The recruiter assigned to this role can share more information about the specific compensation and benefit details associated with this role during the hiring process. To view Anduril's candidate data privacy policy, please visit **********************************************

Arcadis is the world's leading company delivering sustainable design, engineering, and consultancy solutions for natural and built assets. We are more than 36,000 people, in over 70 countries, dedicated to improving quality of life. Everyone has an important role to play. With the power of many curious minds, together we can solve the world's most complex challenges and deliver more impact together. Role description: Arcadis is seeking an Instrumentation & Controls (I&C) System Design Engineer to join our Resilience Water team in our Detroit , MI location. This is an exciting opportunity for an I&C Systems Design Engineer, preferably with consulting engineering experience, to join our team and lead projects with a variety of I&C, automation system design, and SCADA integration. The selected candidate will be responsible for I&C and SCADA design and implementation services for diverse clients and projects for environmental remediation, industrial & municipal water and wastewater treatment, conveyance systems, and facilities. Role accountabilities: This role provides engineering and design services to produce design & construction documents for projects. They will coordinate with process, mechanical, and electrical engineers assigned to the project and prepare technical memorandums and develop design criteria, SCADA system architecture, process and instrumentation diagrams (P&IDs), SCADA network diagrams, process control functional narratives, control schematics, panel layout diagrams, and interconnection diagrams. Additional duties include: Support projects and clients in the planning, design and construction of water/wastewater facilities and other similar industrial facilities, serving as Arcadis' main point of contact with our clients for their I&C needs. Project Manager leading all facets of project, to include; budgeting, planning, cost estimating, design and execution of SCADA and instrumentation & control systems. Support electrical engineering and developing electrical design to support the I&C systems design. Conduct factory testing, site acceptance testing, field checkout, and startup of I&C and SCADA system startups. Utilize technical experience and expertise in the execution of I&C and SCADA projects from inception to successful startup and turnover. Program process control logic in PLCs and configure graphical HMI for SCADA system on a variety of platforms. Configure historical data collection, archiving and generating reports on a variety of platforms. Produce effective and accurate written specifications for implementing I&C and SCADA projects. Mentor junior engineers and designers. Required Qualifications: Bachelor's degree in Mechanical, Electrical, Chemical, Environmental Engineering or a closely related field of study 7+ years of I&C, Automation, and SCADA system design and implementation experience in water/wastewater market. Professional Engineer license or the ability to obtain license within 12 months. Key Skills and Attributes: Basic knowledge of Autocad and Revit. Ability to self-direct and work on multiple assignments at once while meeting project deliverable dates and completing other task-driven assignments Excellent communication skills, both oral and written, as well as excellent teamwork skills. Experience with Microsoft Office (Word, Excel, MS Project, and Outlook) Advance knowledge in applying instrumentation and controls to process and electromechanical equipment and developing SCADA networks. Knowledge of designing and developing fiber optic cable networks for SCADA systems. Advance knowledge of radio and cellular telemetry networks. Basic knowledge of IT and industrial networks. Valid driver's license and clean driving record. Willingness to travel (25%). Preferred Qualifications: 10+ years of experience in developing bid and construction documents PLC/HMI programming, configuration & startup experience Why Arcadis? We can only achieve our goals when everyone is empowered to be their best. We believe everyone's contribution matters. It's why we are pioneering a skills-based approach, where you can harness your unique experience and expertise to carve your career path and maximize the impact we can make together. You'll do meaningful work, and no matter what role, you'll be helping to deliver sustainable solutions for a more prosperous planet. Make your mark, on your career, your colleagues, your clients, your life and the world around you. Together, we can create a lasting legacy. Join Arcadis. Create a Legacy. Our Commitment to Equality, Diversity, Inclusion & Belonging We want you to be able to bring your best self to work every day which is why we take equality and inclusion seriously and hold ourselves to account for our actions. Our ambition is to be an employer of choice and provide a great place to work for all our people. We are an equal opportunity and affirmative action employer. Women, minorities, people with disabilities and veterans are strongly encouraged to apply. We are dedicated to a policy of non-discrimination in employment on any basis including race, creed, color, religion, national origin, sex, age, disability, marital status, sexual orientation, gender identity, citizenship status, disability, veteran status, or any other basis prohibited by law. Arcadis offers benefits for full time and part time positions. These benefits include medical, dental, and vision, EAP, 401K, STD, LTD, AD&D, life insurance, paid parental leave, reward & recognition program and optional benefits including wellbeing benefits, adoption assistance and tuition reimbursement. We offer nine paid holidays and 15 days PTO that accrue per year. The salary range for this position is $80,461 - $132,761. Actual salaries will vary and are based on several factors, such as experience, education, budget, internal equity, project and location. #LI-RT4 #Resilience-NA #Water-NA #Water-NA-D&E

Burns & McDonnell is proud to be the market leader in providing program management services to the electric utility industry. As our clients focus on their capital investment in the energy delivery market, Burns & McDonnell brings a seasoned team to assist them across a variety of operational roles to ensure the needed grid improvements are executed on time and on budget. The ideal candidate will have a safety-first mindset, be dedicated to making their clients and teams successful, and take an entrepreneurial approach to their job. As programs are an extension of our clients day-to-day operations, roles within the program management track allow for frequent, often daily, client interaction. Engineers on the program management track leverage their technical expertise and education to make informed decisions in the execution of projects on behalf of our clients. Program management often offers engineers an opportunity to lead a team in one of the below functional areas after demonstrated proficiency. Generally, engineers in program management will pursue job responsibilities in the following areas: Project Management + Lead a cross-functional team to execute substation, transmission line, and telecommunication projects from inception through design and construction to closeout + Oversee 5-20 projects concurrently of varying sizes ($100k-$50M ) and voltages (4kV-765kV) + Manage projects for schedule adherence identifying risks and requirements to successfully achieve a project's in-service date + Navigate projects through client gate approval processes including presentations to senior and executive management as required by each client + Manage projects for financial adherence maintaining an accurate cost forecast reflecting committed and uncommitted costs for an estimate-at-completion + Coordinate craft labor resources with client approved vendors for construction, testing and other field activities + Provide regular status updates on projects by maintaining project data and routine reporting as well as meeting updates for clients + Lead project meetings with cost, schedule, real estate, environmental, construction and engineering resources to facilitate project execution Portfolio Management + Develop a multi-year capital expenditure plan to support client's replacement and betterment of electric transmission and distribution assets + Regular interface and coordination with project sponsor organizations to determine details of proposed plans and business justification + Ensure synergies across projects are incorporated into the portfolio of work to prevent scope from being duplicated or performed inefficiently + Monitor composition of client's capital investment allocation to align with stated subsidiary investment targets for optimal rate of return + Engage with project sponsors to evaluate need-by date for realistic schedules and budgets + Assist with creation and compilation of rate filing support for federal and state filings + Review tabletop engineering estimates for accuracy and scope + Review project change requests (scope, In-service date, etc.) and reconcile with the existing and long-range portfolio of work + Interface with client's accounting group to establish financial setup for projects + Create analyses & reports to assist the client in tracking, coordination, and execution of projects + Build baseline scopes, schedules, and budgets to be released to multiple client's stakeholders Outage/Construction Sequencing + Responsible for development of substation and transmission project construction lifecycles with focus on outage efficiency and constructability + Manage multiple projects simultaneously while meeting specified deliverable dates and expectations + Analyze scoping and project documents to determine boundaries of required construction within substation and within electric grid + Conduct site walkdowns and project calls with project team as necessary to establish an achievable construction sequence with attainable outages + Analyze needed outages against adjacent outages scheduled in the area + Create initial outage sequence to communicate proposed construction lifecycle to project team + Coordinate with drafting resources to create engineering-caliber drawings that document the evolution of a project from present conditions to final state and all needed incremental steps As part of the Burns & McDonnell team we are looking for team members that foster a culture based on our MacCulture Principles, quality, diversity, and inclusion to enhance team cohesion and camaraderie. Individuals who want to tackle new and novel challenges within the utility industry to help our clients improve the execution of capital investment work can find entrepreneurial opportunities to assist in the pursuit and expansion of our program management offerings. **Qualifications** + Bachelor's degree in engineering from an accredited program required + Minimum of seven years of experience in engineering design, project management or a relevant role + Excellent facilitation, collaboration, organization, and problem solving skills + Ability to thoughtfully and positively influence, lead and manage + Strong planning and analytical skills + E.I.T. or PE license preferred + Must demonstrate superb oral and written communication skills, strong interpersonal skills, and the ability to clearly and effectively present complex information to all levels of employees, management, and clients + Travel 10-20% depending on project assignment and client needs This job posting will remain open a minimum of 72 hours and on an ongoing basis until filled. EEO/Disabled/Veterans **Job** Electrical Engineering **Primary Location** US-OH-Akron **Other Locations** US-OH-Columbus **Schedule:** Full-time **Travel:** Yes, 25 % of the Time **Req ID:** 241878 **Job Hire Type** Experienced #LI-VR #T&D

Danis is a third-generation, family-owned construction manager and builder with a long history of delivering complex, high-quality projects across healthcare, higher education, commercial, and industrial markets. Built on trust, integrity, and a commitment to people, we take pride in creating spaces that strengthen the communities we serve while providing rewarding careers for those who help us build them. As a Project Engineer at Danis, you'll play an integral role in helping deliver high-quality, well-coordinated construction projects from start to finish. You'll work closely with project managers, superintendents, designers, and subcontractors to ensure every phase of construction runs smoothly-on time, within budget, and according to plan. This position offers broad exposure to all aspects of the construction process, from field operations to project planning and documentation. At Danis, we're committed to helping our people build long-term careers. Through Danis University, you'll have access to training, mentorship, and professional development designed to strengthen your technical skills and prepare you for future leadership opportunities. Responsibilities What You'll Do: Project Planning & Coordination Assist the Project Manager and Superintendent in managing daily administrative and technical project activities. Develop and update project schedules, helping coordinate work among subcontractors, suppliers, and field teams. Participate in constructability reviews and site logistics planning to identify and address potential challenges early. Serve as a communication link between owners, designers, and field personnel, ensuring timely information flow. Support self-perform operations and subcontractor activities by monitoring progress and documentation through project management software. Quality, Safety & Field Support Verify that work meets design specifications, drawings, and Danis quality standards. Review submittals, RFIs, and shop drawings to ensure accuracy and compliance. Assist with layout verification and field coordination to resolve design or installation discrepancies. Support implementation of the Danis Safety Program by participating in safety audits, meetings, and pre-installation reviews. Help track inspections, testing, and quality control documentation. Cost & Documentation Management Help identify, document, and track changes to project scope and budget. Assist with processing submittals, change orders, and purchase orders. Maintain project logs and records, including drawings, submittals, RFIs, and field reports. Participate in project cost reviews and monthly audits. Collaboration & Relationship Building Build and maintain positive relationships with owners, architects, engineers, and subcontractors. Communicate clearly and proactively to keep teams aligned and issues resolved quickly. Contribute to a culture of teamwork, professionalism, and continuous improvement. Represent Danis with integrity and professionalism on-site and within the industry. Qualifications What You Bring Bachelor's degree in Engineering or Construction Management preferred. 2-5 years of construction experience (internship or full-time) with a general contractor. Familiarity with construction drawings, specifications, and project management tools. Strong organizational, communication, and problem-solving skills. A proactive, team-oriented mindset and interest in growing your career with Danis. Working Conditions You'll spend time both in the office and on active construction sites. Travel between regional offices may be required. Field work may include exposure to varying weather conditions and typical construction environments. Physical Demands Ability to climb ladders and scaffolds, lift up to 50 pounds, and remain on your feet for extended periods. Must have acceptable vision (with correction if necessary) and the ability to safely navigate job sites. Why Danis At Danis, our people are the foundation of our success. We invest in your development through Danis University, mentorship programs, and ongoing opportunities to expand your experience across diverse project types. We're proud to promote from within and support employees as they grow into new roles and take on new responsibilities. Why You'll Love Working Here You'll gain broad field experience across multiple projects and building systems. You'll work alongside talented builders and mentors who take pride in doing things right. You'll have access to ongoing training, technology, and growth opportunities. You'll join a company that values craftsmanship, teamwork, and continuous improvement. Competitive Total Compensation Annual merit increases and bonuses recognizing your growing expertise Profit sharing because your success drives our success Comprehensive Benefits Package Full health, dental and vision insurance for you and your family Short-term, long-term, and supplemental insurance coverage Life insurance for peace of mind Professional Development Danis University: 45+ training programs to advance your safety expertise Certification reimbursement and continuing education support Clear career progression paths within our growing organization Work-Life Integration Generous vacation and PTO policies Flexible spending accounts (FSA) and Health Savings Account (HSA) options 401K retirement planning Purpose-Driven Culture "Constructing Hope" community outreach program Work for a company that genuinely values safety over shortcuts Be part of a team that's building more than structures-we're building careers and communities Join a company where you can build exceptional projects-and a lasting career. EEO Statement Danis is an Equal Opportunity Employer. Danis does not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status, or any other basis covered by appropriate law. All employment is decided on the basis of qualifications, merit, and business need. NO AGENCY CALLS OR SUBMISSIONS Danis does not accept unsolicited resumes from recruitment agencies. Any resumes submitted without a signed agreement will be considered the property of Danis, and no fees will be paid. #LI-ONSITE

Marous Brothers Construction (MBC) is seeking a self-motivated Project Engineer for our Building Groups in Columbus, OH! MBC is recognized as one of the leading construction firms in the Midwest, offering integrated services for complete construction solutions. Learn more about MBC by visiting ******************************* Join Marous Brothers Construction as a Full-Time Project Engineer, also known as Assistant Project Manager, and elevate your career to new heights! Located on The Ohio State University's campus, this onsite position offers you the exhilarating opportunity to shape innovative projects that leave a lasting impact. Your Journey Starts Here: As an Assistant Project Manager, you'll support daily operations across dynamic jobsites. You'll manage RFIs, submittals, material deliveries, and project documentation. Collaborate with seasoned professionals, solve problems creatively, and help drive project success. You should possess a problem-solving mindset, ready to think outside the box when challenges arise on job sites. Time management skills are critical for meeting deadlines and ensuring project milestones are achieved. What Powers Your Path to Success: * Bachelor's degree or equivalent experience * 1-3 years in a Project Engineer or similar role * Strong communication, organization, and analytical skills * Familiarity with project management software * A proactive, ethical, and team-oriented mindset Why join our team? * Top Workplace 2025, 2024, 2023, & 2022 - The Plain Dealer & cleveland.com * Top Workplace USA 2025 * Competitive compensation package * Bonuses * Health insurance 3 Plan Options, including HSA & FSA * HSA & FSA Annual Company Contribution * $3,000 Referral Bonus * Employee fitness room * Employee open kitchen * Employee outdoor courtyard meeting/gathering space * Marous University - weekly free relevant education * Monthly culture events * Tuition Reimbursement Program * Career path opportunities * Flexible Scheduling * Mentor Program * Stability - family owned and operated since 1980 * Medical * Dental * Orthodontic * Vision * Virtual Mental and Physical Health * Accident Insurance * Critical Illness * Hospital Indemnity * Life Insurance/AD&D *company paid* * 401k with employer match * Paid Time Off * Paid Holidays * Parental Leave * STD & LTD *company paid* * Paid maternity leave via STD * Travel Reimbursement * Free Parking * Employee Assistance Program, including Legal & Financial *company paid* * Casual Fridays * Community Support Program Looking for a team that invests in you? We're looking for talented individuals like you to join our team and help us achieve our goals. Be the driving force behind the next Buckeye chapter Check out our other projects in the Columbus area... * Columbus Avenue Revitalization * SITECH Ohio Marous Brothers Construction is committed to creating a diverse environment and is proud to be an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status. MBC is also committed to compliance with all fair employment practices regarding citizenship and immigration status. We conduct pre-employment drug testing. Also must be able to pass background check.

Job Description Facilities Engineer Status: Full time, permanent Compensation: $30-32 per hour Benefits: Full benefits package including medical, dental vision, life & disability insurance, retirement pension, paid holidays, paid sick and vacation Summary: Reporting to the Department Manager of Buildings and Grounds and under the direction of the Chief Engineer, operates/inspects/performs preventative maintenance on major HVAC/electrical/plumbing equipment and repairs malfunctions as needed. Operates/performs routine maintenance of all Power House/major HVAC equipment. Monitors various equipment from the control center. Responds to/mitigates/reports any building emergencies. Serves in an assistant capacity for work on boilers, chillers, cooling towers, air handlers, and rooftop units. Essential Functions: Responsible for the daily operation and maintenance of the mechanical, electrical, and plumbing (MEP) systems at the Ohio History Center, the Ohio Village, Collections Storage facility, and statewide as assigned. Consults on the planning and engineering of mechanical systems and preventive maintenance programs for the statewide system of sites and museums. Advises staff on major MEP capital needs. Monitors energy use and actively pursues improvements in energy efficiency of mechanical and electrical systems. Other duties as assigned. Required Education, Skills, Experience Associate's degree in engineering or equivalent in education, training and work experience plus five to eight years of experience in maintenance and management of mechanical and electrical systems for a comparable facility. Valid Ohio driver's license. Desired Skills & Experience CEM/CFM/FMP certifications and/or Professional Engineer (PE) license preferred Ability to read and interpret construction drawings Required Competencies: Ability to operate a powered industrial truck, preferably cherry picker and stand-up forklifts Ability to read blueprints, repair manuals, and/or parts catalogs Close attention to detail and safety Self-motivated with communication, organizational, problem-solving, and time management skills Able to utilize Microsoft software programs (Outlook, Teams, Word, Excel) and learn environmental management system Ability to communicate effectively with a diversity of individuals at all organizational levels Thorough understanding and application of heating, ventilating, air conditioning and electrical engineering; operation and maintenance of heat and power generating equipment; pneumatic, electric and digital controls. Familiarity with ASHRAE standards. Experience with Energy Star Portfolio Manager or similar energy-tracking software. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Will be required to wear Personal Protective Equipment (PPE). Frequently exposed to noisy conditions. Frequently exposed to dusty conditions. Occasional work outdoors in varying weather conditions including extreme cold and heat. Ability to travel in Ohio Application Instructions: Submit application through Ohio History Connection careers website: ******************************************************* For questions or accommodations requests, please email ************************* or call ************. Ohio History Connection is an equal opportunity employer. All prospective employees are required to undergo a fingerprint background check processed by the Ohio Bureau of Criminal Investigation & Identification (BCI) in accordance with the Volunteer Children's Act. Additionally, prospective employees will also submit to a drug test. Both will occur after the offer of employment is accepted. The results of the background check and drug test are not immediate disqualifiers to employment and are reviewed in accordance with Ohio History Connection policies and procedures. Inquiries must be directed to the Human Resources Director at ************ or via email at *************************. Job Posted by ApplicantPro

Full-time Description The Mechatronics Controls Engineer is responsible for designing, programming, troubleshooting, and optimizing automated control systems across the Green Sustainable Solutions (GSS) manufacturing plant. This role ensures that all PLC, robotics, and electrical systems operate efficiently and reliably to support production goals and safety standards. Key Responsibilities Design, program, and maintain PLC systems including Siemens SIMATIC ET 200SP, Allen-Bradley CompactLogix (L33ER), and Micro-820 controllers. Troubleshoot robotic systems include Premier Tech Stacking, Bagging, and Belt Control systems. Develop and implement electrical schematics, HMI interfaces, and control network diagrams. Collaborate with production, maintenance, and engineering teams to optimize automation performance. Manage and maintain PLC backups, software versioning, and documentation. Support installation and startup of new automation equipment or process improvements. Ensure compliance with OSHA, NEC, and corporate safety and electrical standards. Provide technical support and training to maintenance and operations teams. Requirements Qualifications Bachelor's Degree in Mechatronics, Electrical, or Automation Engineering (or equivalent experience). 3+ years of experience in industrial controls, robotics, or mechatronics in a manufacturing environment. Hands-on experience with Siemens TIA Portal, Rockwell Studio 5000, and HMI development tools. Strong knowledge of industrial networking (EtherNet/IP, Profinet). Excellent troubleshooting and analytical skills. Ability to work cross-functionally in a fast-paced production environment.

At Integrity Kokosing Pipeline Services LLC (IKPS), we are committed to setting the benchmark in the oil and gas industry by delivering exceptional construction services with a focus on safety, quality, and integrity. Proudly Ohio-based but with a reach that extends across multiple states, IKPS offers a comprehensive range of services, including pipeline installation and maintenance, water resource management, integrity management, facility work, and fabrication. Since joining forces with Kokosing in 2012, we have combined our strengths to deliver unparalleled service and innovation. Join our dedicated team and be part of a company that contributes to the overall efficiency and effectiveness of the oil and natural gas industries to drive the future of energy infrastructure. Job Description: About Integrity: At Integrity Kokosing Pipeline Services LLC (IKPS), we are committed to setting the benchmark in the oil and gas industry by delivering exceptional construction services with a focus on safety, quality, and integrity. Proudly Ohio-based but with a reach that extends across multiple states, IKPS offers a comprehensive range of services, including pipeline installation and maintenance, integrity management, facility work, and fabrication. Position Summary: A Project Engineer at Integrity Kokosing works to support the field team in overall project success and progression. By assisting the field team with project planning and coordination, they have a constant pulse on all project activities monitoring project KPIs, costs, billings, schedules, and contracts assisting in the implementation of corrective actions leading to overall project success. **If you excel in technical functions such as technical operations, project coordination, scheduling, budgeting, documentation review, and progress reporting, we strongly encourage you to apply! Experience in the construction space is a preference; however, we are open to considering the right individual who is a top performer in the functions listed above as your skills may be very transferrable. ** Eligibility Requirement: Applicants must be currently authorized to work in the United States on a full-time basis. We are unable to sponsor or take over sponsorship of employment visas at this time. Duties and Responsibilities: Coordinate with the project team to ensure compliance with the contract, budget, schedule, and job cost Develop, implement and administer project engineering procedures and other work controlling documents (submittals, RFI's, expediting material deliveries, payment of Subcontractors/Vendors and Owner pay requests) Work with project teams to gather and review weekly documentation; Timecards, Daily progress reports, JSA, and equipment hour reports Create subcontracts and schedule work to maintain overall project schedule, perform subcontractor prejob safety meetings Work with Superintendent to control job costs and production budgets Prepare and submit accurate and timely monthly cost, income, and cash flow projections Coordinate, price and assist Project Manager in settlement of change orders and claims Complete site inspections to produce daily reports of work and subcontractor activities Update project schedule based on site inspections and progress to produce an accurate timeline and distribute to appropriate stakeholders Maintain appropriate one call notifications for assigned projects Review daily progress reports to create and distribute invoices as required by the assigned project requirements Act as a liaison between project management and field leadership to ensure construction complies with drawings and specifications Represent assigned project and IKPS during client or project management meetings Perform additional assignments per supervisor's direction Skills and Abilities: Ability to travel as this role requires regular and extensive travel within the project geographic region. Anticipate 70% travel in this position Excellent communication and interpersonal skills, plus demonstrated ability to manage and function in a team of varied disciplines Understand and interpret safety laws and company policies/standards Knowledge of construction equipment and techniques, drawings, specifications, building materials, and required standards is preferred Must be able to read and interpret blueprints and other technical drawings and documents. Must have project management and organizational planning skills. Education and experience: Possess a 4-year bachelor's degree in engineering, construction management, or equivalent combinations of technical training and experience is preferred (5) + years of similar construction engineering experience preferred Experience with computer software, primarily MS Excel with the ability to learn new software programs, Oracle Primavera for scheduling, Viewpoint for accounting, is preferred Benefits: Integrity Kokosing offers competitive compensation and benefit packages including medical insurance, life insurance, disability insurance, paid time off, mileage reimbursement, per diem, and a 401k program. Integrity Kokosing is an equal employment opportunity employer and affirmation action federal/state contractor. The company does not discriminate on the basis of race, color, religion, sex, sexual, orientation, gender identity, national origin, age, disability, veteran status, or any other protected class. Integrity Kokosing offers a competitive compensation and benefits package including medical, dental, vision, company paid life, and disability insurance. We also provide competitive incentives to eligible team members, like paid time off and 401K plus match to reward our team members for staying committed to our customers and keeping safety a priority. Integrity Kokosing is an equal employment opportunity employer and affirmation action federal/state contractor. The company does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other protected class.

Business Unit: Final Product Technologies / Combination Product Medical Device Employment Type: Contract Duration: 1+ years with possible extension or conversion to FTE Rate: $33 - $37/hour Posting Date: 10/26/2024 Note: This role will mostly support different working shifts . 3 Key Consulting is hiring! We are recruiting an Engineer for consulting engagement with our direct client, a leading global biotechnology company. Ideal candidate: 2+ years of working experience. Knowledge of data analysis, CGMP documentation, and packaging equipment. Job Description: Position involves support of senior staff in the initiation, design, and delivery of projects, particularly for automation related scope. Employ basic engineering skills and practices to gather user requirements and translate them into technical documentation for execution by third party firms. Assist with project definition by performing engineering studies and assessment for automation system installations. Perform field evaluations of existing systems and provide engineering design recommendations. Schedule: This position should not exceed 40 hours a week but some overtime may be needed occasionally. On this role is required working hours flexibility as per Projects need. Extended and second shift will be required for period of time. Mon-Friday with possible occasional weekend shifts. (Candidates will be able to volunteer for weekend shifts). 10% travel may be required. Top Must Have Skill Sets: Experience in Pharmaceutical Packaging Operations. Commissioning, Characterization and Validation Experience Protocols Execution and reports generation Red Flags: Ideal Candidate: 2+ years of Pharmaceutical Packaging working experience. Knowledge of data analysis, CGMP documentation, and Packaging Equipment Validation. Interview Process: First stage phone interview after screening resumes. Second stage phone interviews with colleagues (1-3). We invite qualified candidates to send your resume to *****************************. If you decide that you're not interested in pursuing this particular position, please feel free to take a look at the other positions on our website ******************************* You are also welcome to share this opportunity with anyone you think might be interested in applying for this role. Regards, 3KC Talent Acquisition Team