Machinist jobs at AerSale

Inspects, maintains, and repairs locomotives in accordance with FRA regulations. 3rd Shift, 2300 - 0700, Days off Wednesday/Thursday Initial pay between $27.35/hr - $30.77/hr based off experience. Salary will increase to $34.19/hr once qualified (typically takes 6 months to a year) Responsibilities ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned. Fits and assembles parts into complete assembly. Verifies dimensions and alignment of assembly. Installs machined replacement parts in mechanisms, machines, and equipment, and tests operation of units to ensure functionality and performance. Operates welding equipment to cut or weld parts. Performs mechanical inspection on locomotives and repairs defects to conform to FRA regulations. Tests locomotives for performance by use of load box. Replaces brake shoes on locomotives. Disassembles and rebuilds locomotive trucks and replaces wheel sets and traction motors. Repairs and rebuilds diesel engines, air compressors, and many other locomotive components. Disassembles and reassembles locomotives and machinery. Qualifications QUALIFICATION REQUIREMENTS. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed be low are representative of the knowledge, skill, and/or ability required. Rea son able accommodations may be made to enable individuals with disabilities to perform the essential functions. EDUCATION AND/OR EXPERIENCE High School diploma/GED and One year certificate from college or technical school; or 4 years heavy mechanical repair experience and/or training; or equivalent combination of education and experience. Experience reading blueprints. LANGUAGE SKILLS Ability to understand both verbal and written communications - both general and technical. Ability to write rou tine reports and correspondence. MATHEMATICAL SKILLS Ability to add, subtract, multiply, and divide in all units of measure, us ing whole numbers, common fractions, and decimals. Ability to com pute rate, ratio, and percent. REASONING ABILITY Problem solving and trouble shooting skills. Must have mechanical aptitude. Ability to deal with prob lems involving several concrete variables in standardized situations. OTHER SKILLS AND ABILITIES Must be qualified welder. LICENSES, CERTIFICATES, OR REGISTRATIONS Must have current valid driver's license. PHYSICAL DEMANDS. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential func tions of this job. Reasonable accommodations may be made to enable individuals with dis abilities to perform the essential functions. While performing the duties of this job, the employee is regularly re quir ed to stand; walk; use hands to finger, handle, or feel objects, tools, or controls; and reach with hands and arms. The employee is oc ca sionally required to climb or balance; stoop, bend, kneel, crouch, or crawl; and talk or hear. The employee must occasionally lift and/or move up to 70 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and the ability to adjust focus. Exposure to equipment that intensifies the heat factor on an occasional basis. WORK ENVIRONMENT. The work environment characteristics described here are rep resentative of those an employee encounters while performing the essential func tions of this job. Reasonable accommodations may be made to enable individuals with dis abilities to perform the essential functions. While performing the duties of this job, the employee regularly works near moving mechanical parts. The employee occasionally works in out side weather conditions and is occasionally exposed to fumes or airborne par ticles and risk of electrical shock. The noise level in the work environment is usually loud. OTHER Must have personal tools (com plete set of small hand tools up to and including ½" drive ratchet and sock et set). Qualified applicants will be considered for vacancies without regard to race, color, religion, national origin, age, disability, or any other characteristic protected by prevailing state and federal laws, regulations and ordinances.

Tool & Die maker II (Full Time) Department: All Openings, Manufacturing - Experienced Summary: Tooling Specialist duties will require Programming, Designing, and Manufacturing of tools working with other tool makers to advance tool making processes. Will work closely with Manufacturing Engineering, Production, Supervisors, and Leads, ensuring Production is able to keep up with schedule. Job Description: Design, Program and Manufacture Tooling using CNC or Manual Machines to fabricate Must have working knowledge NX, Vericut, Team Center, LN and EAM Software Drafting Blue-Prints and Assemblies for Tool Makers or Operators to clearly read and use for Fabrication purposes Work on projects as assigned by Tooling Coordinator or Lead Responsible for requesting material or any other needed items to finish assigned projects Follow Processes and Tooling Standards which have been established Trouble shooting issues from tool wear or improper use of tooling by operators Team Player working with other Tool Makers to ensure dead-lines and project goals are met Perform related duties as required Continuous training in position to ensure skill set is constantly improving and current with needed applications Consistently applying safety practices set in place by Piper's EAS Team Education and Experiences: Minimum high school education or general education degree (GED) and three to five years related experience required or equivalent education and experience. Strong Team Workmanship, organizational and motivational skills, problem solving skills, verbal and interpersonal communication skills. Proficiency in NX, Team Center, Vericut, and CNC Controllers is required. Knowledge of tooling and advanced shop practices. Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactory. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently required to stand, walk and sit; use hands to finger, handle, or feel; reach with hands and arms; and talk or hear; occasionally requires to stoop, kneel, crouch, or crawl. The employee will frequently lift and/or move up to 25 pounds, and occasionally lift and/or move up to 100 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, depth perception, and ability to adjust focus. Mathematical Skills:Ability to perform the duties of the job applying advanced mathematics such as addition, subtraction, multiplication, trigonometry, algebraand division using whole numbers, common fractions, and decimals.

General Description: The primary purpose is to serve as a Machinist, Foreman that leads a group of machinists, technicians, and welders engaged in assignments such as machining, overhauling, inspecting, repairing, and welding various types of parts and components, to design and manufacture support equipment used in all types of maintenance, and to train other machinist in the accomplishment of tasks set forth herein. Reports To: Workshop Manager Responsibilities: You will be responsible for and/or directly assisting with planning the assignments of machinists, technicians, and welders facilitating scheduling qualifications to maintain correct job progress throughout the machine shop and deliver high quality, on-time delivery of customer requirements. You will be developing or providing input to develop processes, procedures, and requirements for accomplishing the work, such as work scopes, instructions, timelines, and tool requirements; reviewing customer RFQ's and specifications to develop safe systems of work, quality control plans, work scopes, material lists, and to assist others engaged in quoting customer RFQ's. You will be updating the Core Automated Management System to provide status updates on active work orders, submitting work done reports for review, improvement projects; as well as ordering parts, materials, and/or consumable items, e.g., purchase requisitions, and providing managers with written and verbal status. You will be responsible for training and developing specialized skills and procedures, as well as using technical knowledge and expertise to make recommendations for documented internal training programs, and providing performance reviews on lower-level machinists, and technicians. You will be responsible for utilizing internal company systems to complete work done reports, inspection forms, and other types of reports to ensure accurate data, billable time and other company reporting requirements. Supervise and/or set up precision machine tools and shop equipment (manually) including, but not limited to lathes, mills, vertical turret lathes, grinders, and drill presses, utilizing overhead cranes and other lifting equipment, and ensuring positioning and alignment by using dial indicators and hand tools such as wrenches and by selecting cutting tools, speed of feed rates, methods of holding, and order of operations, to ensure that machines and equipment will operate safely and efficiently. Operates precision machine tools and shop equipment including but not limited to lathes, mills, vertical turret lathes, grinders, and drill presses to cut, turn, grind, lap, shape, mill, bore, drill, thread, groove, test, broach, and slot to specified tolerance, materials such as: cast iron, steel, nickel alloys, brass, aluminum, copper, bronze, plastic, and other materials in order to fabricate and repair parts from sample parts, sketches, and blueprints. Completes quality checks by examining, analyzing, and or testing the work produced by others using various tools such as: calipers, micrometers, and other measuring equipment to determine and/or correct potential errors in workmanship to prevent quality escapes. Ensures compliance and practice of company quality, health, safety, security, and environmental standards in all work areas and certifies work produced under the Goltens Quality Control Program Performs other related duties as assigned. Required Knowledge, Skills & Abilities Knowledge of pertinent safety rules and regulations as required by the Occupational Safety and Health Administration (OSHA) when cutting and shaping metals and other materials in the fabrication of parts and assembly, installation, or repair of various types of machinery, equipment, tools, and dies, including the proper use of personal protective equipment (PPE) sufficient to ensure the safety of oneself and others. Knowledge of methods to cut and shape metal and other materials such as turning, milling, broaching, grinding, and fitting sufficient to fabricate and repair various types of machinery and equipment. Knowledge of how numerous metals, metal alloys and other materials react to different machine tools and processes and techniques. Ability to measure and lay out reference points, lines, dimensions, and angles using shop mathematics and handbook formulas. Ability to measure and lay out materials, tools, steps, etc., needed to perform assignments. Ability to select and set up machine tools and cutting tools. Practical skill in applying the full range of conventional machining principles, processes, and techniques. Ability to perform precision handwork to fit, finish, and assemble machined parts and equipment. Ability to apply technical practices in the performance of assigned work and to use mechanical shop drawings. Knowledge of physical properties and uses of cast iron, steel, brass, aluminum, copper, bronze, plastic, and other innovative materials for the machining characteristics of parts including tensile and yield strength impacts to machining operations. Knowledge of how numerous metals, metal alloys and other materials react to different machine tools and processes and techniques required for work to be performed, Ability to clean work area and/or job site upon completion of work. Skill in planning work sequences. Ability to use machine drawings, technical manuals, and similar guides. Skill in setting up and operating various machine tools used in the machinist trade to manufacture or re-machine engine components and parts. Skill in using measuring instruments to maintain precise dimensions. Skill in aligning and making fit-up when reassembling various components and equipment. Education and Experience: High school diploma or GED required; associates of science degree with a focus on mechanical disciplines is a plus. Completion of a formal apprenticeship OR successful completion of an in-company, three-year training program . 8 - 10 years of documented experience as a machinist. 2 - 3 years of experience in a leadership role. Conditions of Employment: Must hold a valid passport OR can obtain a passport within 6 months of hire. Must hold and maintain a valid driver's license. New employees will be required to successfully pass employment verification checks. You will be required to submit and pass a criminal background check, including motor vehicle record review. Failure to submit, obtain and maintain the required clearance may result in the withdrawal of a job offer or removal. Successful completion of a pre-employment drug screen (including marijuana) is . A tentative offer of employment will be rescinded if you fail to report to the drug test appointment or fail the test. You will be subject to random testing. You will be required to successfully complete a pre-appointment physical examination. This position requires the ability to lift and carry items weighing 50 pounds. Must have enough manual dexterity and stability as for precision work. Must be able to see details at close range. You will be required to wear personal protective equipment such as helmets, hard hats, gloves, coveralls, glasses, goggles, respirators, and safety shoes continuously for the duration of the work shift. Work is performed in areas where potentially harmful physical and chemical agents are present (e.g., fumes, dust, heat, ionizing and non-ionizing radiation and chemicals). You will be required to participate in medical surveillance programs. Must be able to traverse facilities and machinery by climbing, balancing, lifting, walking, stooping, and carrying materials. This position may be subject to work an uncommon schedule, including nights, weekends, and holidays to meet company or customer requirements. Overtime pay and/or unusual duty hours may be . This position may require rotating shift work. This position may require some travel to provide technical knowledge and/or supervision. Golten Service Co, Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.

Job Description GA Telesis is a global leader providing integrated solutions to the aviation and aerospace industries. We serve over 2,000 customers, including airlines, original equipment manufacturers, maintenance, repair, and overhaul (MRO) providers, and suppliers worldwide, with 31 leasing, sales, distribution, and MRO operations in 19 countries. At GA Telesis, our core business is integrated aviation solutions, and our mission is customer success. The Machinist is a full-time position that will be responsible for using milling machines, boring mills, grinders, lathes, and precision measuring equipment to perform/alterations on aircraft parts and fabricate tolls. The ideal candidate must maintain a positive attitude, strong work energy, and be oriented with excellent oral and written communication skills. This position is based in Medley, Florida. 2nd Shift Hours are 2PM-10:30PM, Mon-Fri. **Important Notice: Eligibility Requirement: Only U.S. Citizens or Permanent Residents will be considered for this position. Responsibilities: Calculate dimensions and tolerances using knowledge of mathematics and instruments such as micrometers and vernier calipers Align and secure holding fixtures, cutting tools, attachments, accessories, or materials onto machines Set up, adjust, and operate all of the basic machine tools and many specialized or advanced variation tools to perform precision machining operations Clean and lubricate machines, tools, and equipment to remove grease, rust, stains, and foreign matter Observe, operate, monitor the feed and speed of, and listen to operating machines or equipment to diagnose machine malfunctions and to determine the need for adjustments or repairs Study sample parts, blueprints, drawings, and engineering information to determine methods and sequences of operations needed to repair products, and determine product dimensions and tolerances Position, fasten, and check work pieces to ensure that they are properly lubricated or cooled Measure, examine, or test completed units to check for defects and ensure conformance to specifications, using precision instruments, such as micrometers Confer with engineering or supervisory personnel to exchange technical information Other duties as required Qualifications: High school diploma or equivalent required Extensive knowledge of methods of repairing, installing, and maintaining components of aircraft articles Skilled in performing repairs and modifications on aircraft articles Familiar with tools and equipment appropriate for the functions performed Ability to understand and interpret documents related to technical manuals, diagrams, and safety rules Check out how GA Telesis is "Intelligently Defining the FUTURE of Aviation and Aerospace" by following us on LinkedIn, Instagram, Facebook! Powered by JazzHR le CPqnI0pB

GA Telesis is a global leader providing integrated solutions to the aviation and aerospace industries. We serve over 2,000 customers, including airlines, original equipment manufacturers, maintenance, repair, and overhaul (MRO) providers, and suppliers worldwide, with 31 leasing, sales, distribution, and MRO operations in 19 countries. At GA Telesis, our core business is integrated aviation solutions, and our mission is customer success. At our Component Repair facility in Miami, Florida, we are seeking a Machinist. This is a full-time position, responsible for using milling machines, boring mills, grinders, lathes, and precision measuring equipment to perform/alterations on aircraft parts and fabricate tools. **Important Notice: Eligibility Requirement: Only U.S. Citizens or Permanent Residents will be considered for this position. Responsibilities: Select the appropriate tools, machines, and materials to be used in the preparation of machinery work Calculate dimensions and tolerances using knowledge of mathematics and instruments such as micrometers and vernier calipers Align and secure holding fixtures, cutting tools, attachments, accessories, or materials onto machines Set up, adjust, and operate all of the basic machine tools and many specialized or advanced variation tools to perform precision machining operations Clean and lubricate machines, tools, and equipment to remove grease, rust, stains, and foreign matter Monitor the feed and speed of machines during the machining process Observe and listen to operating machines or equipment to diagnose machine malfunctions and to determine the need for adjustments or repairs Study sample parts, blueprints, drawings, and engineering information to determine methods and sequences of operations needed to repair products, and determine product dimensions and tolerances Machine parts to specifications, using machine tools, such as lathes, milling machines, shapers, or grinders Check work pieces to ensure that they are properly lubricated or cooled Position and fasten workpieces Measure, examine, or test completed units to check for defects and ensure conformance to specifications, using precision instruments, such as micrometers Confer with engineering or supervisory personnel to exchange technical information Operate equipment to verify operational efficiency Qualifications: Extensive knowledge of methods of repairing, installing, and maintaining components of aircraft articles. Skilled in performing repairs and modifications on aircraft articles. Familiar with tools and equipment appropriate for the functions performed. Ability to understand and interpret documents related to technical manuals, diagrams, and safety rules.

Job Title: Machinist 1 Pay Rate Range: $19.50 + $2.60 (Shift Differential) = $22.10/hr Area Code: ZIP Code: 85307 Keywords: #Glendalejobs; #MachinistJobs; Benefits: * Medical / Health Benefits with multiple plan options, Flexible Spending Accounts, Dental and Vision * 401k * On the job training / cross-training * Life Insurance, disability insurance, and voluntary life insurance for family members available. * Accident and critical illness insurance optional. * Scheduled performance reviews * Referral program Position Summary/Essential Functions: With direct guidance in a team environment, the Machinist is responsible for operating one or more production machines working from blueprints, sketches, and route sheets. Responsibilities: * Perform repetitive machine operations (including reworking parts) such as cutting, shaping, deburring, forming, drilling, reaming and smoothing parts. Make minor adjustments and report improper machine functioning, or cutting action, to team for correction and improvement. * Align and fasten parts using standard fixtures where established methods are followed. * Set feeds, speeds and depth of cut to machine quality parts. * Perform operations such as reaming, tapping, spot-facing, chamfering, countersinking, and counterboring. * Visually inspect parts for burrs and damaged machine surfaces. * Remove burrs, sharp edges, tool marks cracks or other irregularities from machined parts. * Inspect parts for conformance to specifications by visual examination and the use of gages or other measuring instruments. * Accurately and regularly perform Statistical Process Control (SPC) requirements. * Observe all prescribed safety rules and regulations and maintain work area in a neat and orderly condition. * Perform other duties and tasks as assigned. Qualifications: * HS diploma or equivalent. * Minimum 1-3 years general or related machine shop experience or demonstrated ability to perform described responsibilities. * Must demonstrate manual dexterity. * Must be able to read and understand work instructions or blueprints. * Working knowledge of machine shop mathematics. * Must demonstrate effective English verbal, written and interpersonal communication skills. * Ability to work effectively with others and be a participative team player. If you are interested in this role, please apply via the apply now link provided. Our overriding goal is to provide quality staffing solutions that help people, organizations, and communities succeed. Belcan is a leading provider of qualified personnel to many of the world's most respected enterprises. We offer excellent opportunities for contract, temporary, temp-to-hire, and direct assignments. We are the employer of choice for thousands worldwide. For more information, please visit our website at Belcan.com Belcan is an equal opportunity employer. Your application and candidacy will not be considered based on race, color, sex, religion, creed, sexual orientation, gender identity, national origin, disability, genetic information, pregnancy, veteran status or any other characteristic protected by federal, state or local laws.

CMI Group is hiring experienced CNC Machinists in South Phoenix Aerospace & Defense Manufacturing Due to the nature of work performed within our facilities, U.S. citizenship or Valid Permanent Resident status is required. Departments: CNC Mill CNC Lathe CNC Grind Requirements: Minimum High School Diploma or trade school Must be at least 18 years old and Authorized to work in the US Must be able to lift up to 20 pounds on a regular basis. Must be able to stand majority of the shift Competitive pay based on experience level. Team oriented company with top paying wages and benefits in the valley in regards to the Aerospace Industry. To qualify for consideration, all candidates must be able to work 40+ hours per week in a fast paced, high-demand, quality environment. All candidates must also have sufficient verbal and written communication skills as well as good problem solving skills. The Company is equal opportunity employer providing competitive wages and benefits. Medical, dental, vision, disability and life insurance available. 401(k) with company match. This is an equal opportunity employer and will not discriminate against any employee or applicant due to age, race, disability, veteran status, religion, sexual orientation, gender or any other protected classification. VEVRAA federal subcontractor. This company provides provide equal employment opportunities to applicants without regard to race, color, religion, gender, age, national origin, or disabilities in compliance with federal and state laws including: The Civil Rights Act of 1964 as Amended Age Discrimination Act of 1967 as Amended Rehabilitation Act of 1973 Vietnam Era Veterans Readjustment Act of 1974 Americans with Disabilities Act Amendment Act of 2009 (ADAAA) The Wagner-Peyser Act as Amended. The Workforce Innovation and Opportunity Act Fair Credit Reporting Act, 15 U.S.C. 1681 et seq

Grind Machinist Defense & Aerospace Machine Shop SHIFT : Night Shift: 3:30 pm - 2 am Monday - Friday ID / OD Grind Operates grinding machines to assemble products and produce parts to established blueprint and engineering specifications. Manual and CNC grinders. Machines used are Heald ID, Toyoda OD manual and CNC, Okamoto CNC ID and OD, Kellenberger CNC, honing, surface and centerless grinding. Heald experience a plus. Grind Machinist Duties / Responsibilities Grinds and blends steel to prepare for paint or powder Selects, mounts, attaches and calibrates a variety of attachments to grind angles, contours, lines, spheres, etc. onto surfaces Complete all required paperwork properly - inspection reports, spc, job travelers, etc. Work in tolerances of .0002-.0005 Able to work independently and stay on task - operate 2 machines regularly Ability to problem solve and communicate process improvement suggestions with management Grind Machinist Required Skills / Abilities Familiarity with Okuma and Kellenberger Grinders, Heald a plus Proficient with standard types of inspection equipment - Indicating Micrometers, Bore Gages, Sunnen Gage, Test Indicators Experience in grinding holding tolerances preferred Strong attention to detail, quality-focused, and willing to learn General knowledge of operating hand tools, portable power tools, and bench tools Ability to read and interpret written information and follow directions Grind Machinist Education / Experience High School or GED CNC experience preferred but not required 5+ years ID/OD grinding experience preferred, but will train lathe or mill machinist looking to grow in one of the most complete grind departments in the valley Team oriented company with top paying wages and benefits in the valley in regards to the Aerospace Industry. To qualify for consideration, all candidates must be able to work 40+ hours per week in a fast paced, high-demand, quality environment. All candidates must also have sufficient verbal and written communication skills as well as good problem solving skills. The Company is equal opportunity employer providing competitive wages and benefits. Medical, dental, vision, disability and life insurance available. 401(k) with company match. This is an equal opportunity employer and will not discriminate against any employee or applicant due to age, race, disability, veteran status, religion, sexual orientation, gender or any other protected classification. VEVRAA federal subcontractor. This company provides provide equal employment opportunities to applicants without regard to race, color, religion, gender, age, national origin, or disabilities in compliance with federal and state laws including: The Civil Rights Act of 1964 as Amended Age Discrimination Act of 1967 as Amended Rehabilitation Act of 1973 Vietnam Era Veterans Readjustment Act of 1974 Americans with Disabilities Act Amendment Act of 2009 (ADAAA) The Wagner-Peyser Act as Amended. The Workforce Innovation and Opportunity Act Fair Credit Reporting Act, 15 U.S.C. 1681 et seq

Job Description Grind Machinist Defense & Aerospace Machine Shop SHIFT: Night Shift (20% night Shift differential pay) ID / OD Grind Operates grinding machines to assemble products and produce parts to established blueprint and engineering specifications. Manual and CNC grinders. Machines used are Heald ID, Toyoda OD manual and CNC, Okamoto CNC ID and OD, Kellenberger CNC, honing, surface and centerless grinding. Heald experience a plus. Grind Machinist Duties / Responsibilities Grinds and blends steel to prepare for paint or powder Selects, mounts, attaches and calibrates a variety of attachments to grind angles, contours, lines, spheres, etc. onto surfaces Complete all required paperwork properly - inspection reports, spc, job travelers, etc. Work in tolerances of .0002-.0005 Able to work independently and stay on task - operate 2 machines regularly Ability to problem solve and communicate process improvement suggestions with management Grind Machinist Required Skills / Abilities Familiarity with Okuma and Kellenberger Grinders, Heald a plus Proficient with standard types of inspection equipment - Indicating Micrometers, Bore Gages, Sunnen Gage, Test Indicators Experience in grinding holding tolerances preferred Strong attention to detail, quality-focused, and willing to learn General knowledge of operating hand tools, portable power tools, and bench tools Ability to read and interpret written information and follow directions Grind Machinist Education / Experience High School or GED CNC experience preferred but not required 5+ years ID/OD grinding experience preferred, but will train lathe or mill machinist looking to grow in one of the most complete grind departments in the valley Team oriented company with top paying wages and benefits in the valley in regards to the Aerospace Industry. To qualify for consideration, all candidates must be able to work 40+ hours per week in a fast paced, high-demand, quality environment. All candidates must also have sufficient verbal and written communication skills as well as good problem solving skills. The Company is equal opportunity employer providing competitive wages and benefits. Medical, dental, vision, disability and life insurance available. 401(k) with company match. This is an equal opportunity employer and will not discriminate against any employee or applicant due to age, race, disability, veteran status, religion, sexual orientation, gender or any other protected classification. VEVRAA federal subcontractor. This company provides provide equal employment opportunities to applicants without regard to race, color, religion, gender, age, national origin, or disabilities in compliance with federal and state laws including: The Civil Rights Act of 1964 as Amended Age Discrimination Act of 1967 as Amended Rehabilitation Act of 1973 Vietnam Era Veterans Readjustment Act of 1974 Americans with Disabilities Act Amendment Act of 2009 (ADAAA) The Wagner-Peyser Act as Amended. The Workforce Innovation and Opportunity Act Fair Credit Reporting Act, 15 U.S.C. 1681 et seq

Job Description Grind Machinist - Night Shift (20% Differential Pay) Defense & Aerospace Machine Shop Shift: Night Shift - 20% Differential! ID / OD Grind Operates grinding machines to assemble products and produce parts to established blueprint and engineering specifications. Manual and CNC grinders. Machines used are Heald ID, Toyoda OD manual and CNC, Okamoto CNC ID and OD, Kellenberger CNC, honing, surface and centerless grinding. Heald experience a plus. Grind Machinist Duties / Responsibilities Grinds and blends steel to prepare for paint or powder Selects, mounts, attaches and calibrates a variety of attachments to grind angles, contours, lines, spheres, etc. onto surfaces Complete all required paperwork properly - inspection reports, spc, job travelers, etc. Work in tolerances of .0002-.0005 Able to work independently and stay on task - operate 2 machines regularly Ability to problem solve and communicate process improvement suggestions with management Grind Machinist Required Skills / Abilities Familiarity with Okuma and Kellenberger Grinders, Heald a plus Proficient with standard types of inspection equipment - Indicating Micrometers, Bore Gages, Sunnen Gage, Test Indicators Experience in grinding holding tolerances preferred Strong attention to detail, quality-focused, and willing to learn General knowledge of operating hand tools, portable power tools, and bench tools Ability to read and interpret written information and follow directions Grind Machinist Education / Experience High School or GED CNC experience preferred but not required 5+ years ID/OD grinding experience preferred, but will train lathe or mill machinist looking to grow in one of the most complete grind departments in the valley Team oriented company with top paying wages and benefits in the valley in regards to the Aerospace Industry. To qualify for consideration, all candidates must be able to work 40+ hours per week in a fast paced, high-demand, quality environment. All candidates must also have sufficient verbal and written communication skills as well as good problem solving skills. The Company is equal opportunity employer providing competitive wages and benefits. Medical, dental, vision, disability and life insurance available. 401(k) with company match. This is an equal opportunity employer and will not discriminate against any employee or applicant due to age, race, disability, veteran status, religion, sexual orientation, gender or any other protected classification. VEVRAA federal subcontractor. This company provides provide equal employment opportunities to applicants without regard to race, color, religion, gender, age, national origin, or disabilities in compliance with federal and state laws including: The Civil Rights Act of 1964 as Amended Age Discrimination Act of 1967 as Amended Rehabilitation Act of 1973 Vietnam Era Veterans Readjustment Act of 1974 Americans with Disabilities Act Amendment Act of 2009 (ADAAA) The Wagner-Peyser Act as Amended. The Workforce Innovation and Opportunity Act Fair Credit Reporting Act, 15 U.S.C. 1681 et seq

Job Description CMI Group is hiring experienced CNC Machinists in South Phoenix Night Shift (20% Pay Differential) Aerospace & Defense Manufacturing Shift: Night Shift (20% Pay Differential) Due to the nature of work performed within our facilities, U.S. citizenship or Valid Permanent Resident status is required. Departments: CNC Mill CNC Lathe CNC Grind Deburr / Hand Finisher Requirements: Minimum High School Diploma or trade school Must be at least 18 years old and Authorized to work in the US Must be able to lift up to 20 pounds on a regular basis. Must be able to stand majority of the shift Competitive pay based on experience level. Team oriented company with top paying wages and benefits in the valley in regards to the Aerospace Industry. To qualify for consideration, all candidates must be able to work 40+ hours per week in a fast paced, high-demand, quality environment. All candidates must also have sufficient verbal and written communication skills as well as good problem solving skills. The Company is equal opportunity employer providing competitive wages and benefits. Medical, dental, vision, disability and life insurance available. 401(k) with company match. This is an equal opportunity employer and will not discriminate against any employee or applicant due to age, race, disability, veteran status, religion, sexual orientation, gender or any other protected classification. VEVRAA federal subcontractor. This company provides provide equal employment opportunities to applicants without regard to race, color, religion, gender, age, national origin, or disabilities in compliance with federal and state laws including: The Civil Rights Act of 1964 as Amended Age Discrimination Act of 1967 as Amended Rehabilitation Act of 1973 Vietnam Era Veterans Readjustment Act of 1974 Americans with Disabilities Act Amendment Act of 2009 (ADAAA) The Wagner-Peyser Act as Amended. The Workforce Innovation and Opportunity Act Fair Credit Reporting Act, 15 U.S.C. 1681 et seq

Job Description Provide hands-on manufacturing support, utilizing experience with machining and hardware production. Support the full product life cycle from research and development to low volume production. Provide machine set-up and testing support as required. Must be a responsible self-starter and take pride in their work. Description of Duties: •Must have a full understanding of G-code. •Assist with the initial set-up of CNC mills/lathes. •Participate in fixture design and manufacturability reviews. •Assist with development and documentation of hardware manufacturing and verification processes. •Must be capable of fabricating and assembling prototype hardware in a fast-paced aerospace environment. •Provide back-up lab technician support as needed •Diagnose product problems and communicate symptoms to manufacturing engineers •Must be able to inspect personal 1st piece components using a variety of hand inspection equipment prior to submittal to quality assurance. •Frequently lifts, carries or otherwise moves and positions objects weighing up to 50 pounds when setting up equipment. •Typically bends, stoops and crouches on a regular basis to adjust settings on machinery. •Perform other duties as assigned. Knowledge, Skills, and Abilities: •Knowledge of precision machining •Ability to read engineering drawings including GD&T per ASME Y14.5 •Knowledgeable in a variety of metal working tools and equipment. •Knowledge of and experience with Foreign Object Debris (FOD) and working within a visibly clean environment. Can implement and work to "clean as you go" best practices. •Knowledge of and proficiency in the safe use of mechanical measuring instruments •Familiar with working under ISO9001 & AS9100 requirements •Skill in maintaining a clean, safe work environment. •Ability to operate various assembly equipment, such as pneumatic riveters, helical installation tools (both manual and electric), and various torque wrenches. •Skilled in verbal and written communications. •Ability to stand, stoop, and crouch over 50% of the time •Ability to lift objects weighing up to 50lbs •Ability to read standard work instructions •Ability to solve routine problems independently •Ability to demonstrate self-initiative in a fast-paced environment with minimal supervision •Ability to establish and maintain effective, positive work relationships; have creativity, flexibility, and resourcefulness. •Ability to support production requirements as required for the safe operation of standard manufacturing equipment and machinery Must have a high standard in personal workmanship Job Posted by ApplicantPro

Build an Aviation Career You're Proud Of Build your career with integrity by working at a company that doesn't just treat you like a number. You'll get the tools to do things right in a clean and safe work environment and the trust to fix any issue that comes your way. Our on-the-job training and team of experts mean you'll be set up for success. Take charge of our day-to-day operations, so we remain the trusted source for aviation repair and maintenance. Work with your team to implement the right processes and practices across our organization to help ensure flight and product efficiency. As a Machinist, you'll perform setup, manual operations on a variety of machining equipment. What you'll do: Machine products to tight tolerances Reads and interprets specification manuals, blueprints, templates and layouts to determine machining operation to be performed Verifies dimensions of products for accuracy and conformance to specifications using precision measuring instruments such as calipers, gauges and micrometers Computes dimensions and tolerances and measures and lays out work pieces Adjusts and sets up machine tools for use by machining tool operators Participates in the cross training of other technicians as needed to support production requirements Work independently and as a team to achieve maximum quality Compute and verify dimensions to ensure accuracy Observing all applicable safety practices Carries out other duties as assigned Requirements: Previous or current knowledge and experience with manual machine tools operations Experienced with operating lathes or mills and using measuring instruments (e.g., calipers, gauges, micrometers) Ability to read and interpret manuals and technical drawings Proficient in the use of precision measuring instruments and hand tools Ability to lift up to 50lbs without assistance Ability to stand for extended periods of time Preferred characteristics: VTL (Vertical Turning Lathe) experience preferred High degree of mechanical aptitude, accuracy and precision Ability to follow both written and verbal instructions Benefits that make life better: Comprehensive Healthcare 401(k) with 100% company match; up to 5% vested Paid Time Off starting on day one Bonus opportunities Health- & Dependent Care Flexible Spending Accounts Short- & Long-Term Disability Life & AD&D Insurance Learning & Training opportunities #LI-KC1 #LI-KC1

Build an Aviation Career You're Proud Of Build your career with integrity by working at a company that doesn't just treat you like a number. You'll get the tools to do things right in a clean and safe work environment and the trust to fix any issue that comes your way. Our on-the-job training and team of experts mean you'll be set up for success. Take charge of our day-to-day operations, so we remain the trusted source for aviation repair and maintenance. Work with your team to implement the right processes and practices across our organization to help ensure flight and product efficiency. As a Machinist, you'll perform setup, manual operations on a variety of machining equipment. What you'll do: Machine products to tight tolerances Reads and interprets specification manuals, blueprints, templates and layouts to determine machining operation to be performed Verifies dimensions of products for accuracy and conformance to specifications using precision measuring instruments such as calipers, gauges and micrometers Computes dimensions and tolerances and measures and lays out work pieces Adjusts and sets up machine tools for use by machining tool operators Participates in the cross training of other technicians as needed to support production requirements Work independently and as a team to achieve maximum quality Compute and verify dimensions to ensure accuracy Observing all applicable safety practices Carries out other duties as assigned Requirements: Previous or current knowledge and experience with manual machine tools operations Experienced with operating lathes or mills and using measuring instruments (e.g., calipers, gauges, micrometers) Ability to read and interpret manuals and technical drawings Proficient in the use of precision measuring instruments and hand tools Ability to lift up to 50lbs without assistance Ability to stand for extended periods of time Preferred characteristics: VTL (Vertical Turning Lathe) experience preferred High degree of mechanical aptitude, accuracy and precision Ability to follow both written and verbal instructions Benefits that make life better: Comprehensive Healthcare 401(k) with 100% company match; up to 5% vested Paid Time Off starting on day one Bonus opportunities Health- & Dependent Care Flexible Spending Accounts Short- & Long-Term Disability Life & AD&D Insurance Learning & Training opportunities #LI-KC1 #LI-KC1

Job Description Manual Machinist NIGHT SHIFT (20% Pay differential) Aerospace & Defense Manufacturing Shift: Night shift (20% Pay differential) Due to the nature of work performed within our facilities, U.S. citizenship or Valid Permanent Resident status is required. Skills Required: Read and interpret blue prints and sketches Operate and monitor machines to turn, mill, drill, grind, and shape parts according to specifications, controlling factors like speed, feed, and coolant flow. Measure and inspect finished parts for defects and to ensure they meet all dimensional and quality requirements. Perform routine maintenance and troubleshoot issues with machine tools to ensure optimal performance. Other Requirements: Minimum High School Diploma or trade school Must be at least 18 years old and Authorized to work in the US Must be able to lift up to 20 pounds on a regular basis. Must be able to stand majority of the shift Strong attention to detail and accuracy Understanding of the machine, tool judgment, and ability to make real-time adjustments. Ability to perform repetitive tasks Team oriented company with top paying wages and benefits in the valley in regards to the Aerospace Industry. To qualify for consideration, all candidates must be able to work 40+ hours per week in a fast paced, high-demand, quality environment. All candidates must also have sufficient verbal and written communication skills as well as good problem solving skills. The Company is equal opportunity employer providing competitive wages and benefits. Medical, dental, vision, disability and life insurance available. 401(k) with company match. This is an equal opportunity employer and will not discriminate against any employee or applicant due to age, race, disability, veteran status, religion, sexual orientation, gender or any other protected classification. VEVRAA federal subcontractor. This company provides provide equal employment opportunities to applicants without regard to race, color, religion, gender, age, national origin, or disabilities in compliance with federal and state laws including: The Civil Rights Act of 1964 as Amended Age Discrimination Act of 1967 as Amended Rehabilitation Act of 1973 Vietnam Era Veterans Readjustment Act of 1974 Americans with Disabilities Act Amendment Act of 2009 (ADAAA) The Wagner-Peyser Act as Amended. The Workforce Innovation and Opportunity Act Fair Credit Reporting Act, 15 U.S.C. 1681 et seq

Job Title: Manual Machinist Company: Custom Control Sensors Employee Type: Full Time, Non-Exempt Industry: Manufacturing Education: High School Diploma or equivalent GED Experience: At least five years of experience in a similar aerospace industry or technical training is essential. Company Overview Custom Control Sensors, LLC (CCS) is a global leader of pressure, temperature, and liquid flow switches and sensors for the Aerospace, Defense, and Industrial markets. Since 1957, we have provided high-reliability electro-mechanical devices that utilize the "DUAL-SNAP" action disc spring principle we pioneered. We are AS 9100 and ISO 9001 certified. Industrial Product certifications include UL, CSA, ATEX, GOST, CCC and IECEx. We are growth-orientated, and dedicated to the continued cultivation of a vibrant, energetic work environment. Fostering interaction and collaboration between all associates, connection with our customers, and opportunity for creativity is our primary focus. Benefits Medical Dental 401k with Match Employer funded Life Insurance and Long-term Disability Voluntary Short-term Disability Sick and Vacation Leave 9 Paid Holidays Job Description: The Manual Machinist utilizes parts, prints, drawings, travelers or engineering information in order to determine methods and sequences of operations needed to fabricate prototype components, jigs and fixtures within set tolerances. Key Responsibilities: Setup and operation of manual machinery such as lathes, mills, drill presses and surface grinders. Demonstrate knowledge of working properties of common metals. Select standard materials and equipment required for the job. Machining of complex precision parts to close specifications. Aligning and securing of holding fixtures, cutting tools, attachments, accessories and materials onto machines. Work well with leads of various company departments including engineering, weld shop, assembly and machine shop. Provide training to lower level machinists Maintain a clean and organized workspace. Skills and Requirements: Due to need to maintain ITAR compliance, applicants must be U.S. citizen or legal permanent resident. Able to read and comprehend prints, engineering drawings and information in order to determine methods and sequences needed for completion Proficient knowledge of all machining equipment operations Manual dexterity to safely and proficiently utilize precision equipment, construct moderate to complex set-ups Able to work independently within established procedures associate within job function Good communication skills Ability to read, write and follow written and verbal instruction in English Ability to work well with only a modest amount of repeated instructions Be team oriented and possess flexibility and adaptability Conduct himself/herself in a business-like and civil manner Physical Requirements: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is continuously required to sit, stand, use hands and fingers to flex and extend fingers with opposition of thumb; palmer grasp, talk or hear. The employee is frequently required to walk, bend stoop, reach, turn, twist, push, pull, and to move within all areas of the facilities and parking lots. A computer is used to access, input, and retrieve data. The employee must occasionally lift and/or move over 20 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, color vision, depth perception, and the ability to adjust and focus. An annual eye exam is required. EEO M/F/D/V Custom Control Sensors, LLC. is an Equal Opportunity employer. All qualified applicants for employment shall receive fair and equal treatment regardless of their race (including hair texture and protective hairstyles, such as braids, locks, and twists), color, religion, creed, sex/gender, marital or registered domestic partnership status, age, national origin or ancestry, citizenship, pregnancy, childbirth, breastfeeding or related medical conditions, mental or physical disability (including HIV and AIDS), medical condition including genetic information or characteristics (including those of family members), sexual orientation, veteran or military status, gender identity, gender expression, transgender status or any other basis protected by federal, state or local law, ordinance or regulation. The policy not to discriminate includes, but is not limited to, advertising for positions, recruiting, hiring, placement, promotion, transfer, rates of pay, discipline and termination. No recruiters or recruitment agencies.

Job Title: Manual Machinist Company: Custom Control Sensors Employee Type: Full Time, Non-Exempt Industry: Manufacturing Education: High School Diploma or equivalent GED Experience: At least five years of experience in a similar aerospace industry or technical training is essential. Company Overview Custom Control Sensors, LLC (CCS) is a global leader of pressure, temperature, and liquid flow switches and sensors for the Aerospace, Defense, and Industrial markets. Since 1957, we have provided high-reliability electro-mechanical devices that utilize the "DUAL-SNAP" action disc spring principle we pioneered. We are AS 9100 and ISO 9001 certified. Industrial Product certifications include UL, CSA, ATEX, GOST, CCC and IECEx. We are growth-orientated, and dedicated to the continued cultivation of a vibrant, energetic work environment. Fostering interaction and collaboration between all associates, connection with our customers, and opportunity for creativity is our primary focus. Benefits Medical Dental 401k with Match Employer funded Life Insurance and Long-term Disability Voluntary Short-term Disability Sick and Vacation Leave 9 Paid Holidays Job Description: The Manual Machinist utilizes parts, prints, drawings, travelers or engineering information in order to determine methods and sequences of operations needed to fabricate prototype components, jigs and fixtures within set tolerances. Key Responsibilities: Setup and operation of manual machinery such as lathes, mills, drill presses and surface grinders. Demonstrate knowledge of working properties of common metals. Select standard materials and equipment required for the job. Machining of complex precision parts to close specifications. Aligning and securing of holding fixtures, cutting tools, attachments, accessories and materials onto machines. Work well with leads of various company departments including engineering, weld shop, assembly and machine shop. Provide training to lower level machinists Maintain a clean and organized workspace. Skills and Requirements: Due to need to maintain ITAR compliance, applicants must be U.S. citizen or legal permanent resident. Able to read and comprehend prints, engineering drawings and information in order to determine methods and sequences needed for completion Proficient knowledge of all machining equipment operations Manual dexterity to safely and proficiently utilize precision equipment, construct moderate to complex set-ups Able to work independently within established procedures associate within job function Good communication skills Ability to read, write and follow written and verbal instruction in English Ability to work well with only a modest amount of repeated instructions Be team oriented and possess flexibility and adaptability Conduct himself/herself in a business-like and civil manner Physical Requirements: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is continuously required to sit, stand, use hands and fingers to flex and extend fingers with opposition of thumb; palmer grasp, talk or hear. The employee is frequently required to walk, bend stoop, reach, turn, twist, push, pull, and to move within all areas of the facilities and parking lots. A computer is used to access, input, and retrieve data. The employee must occasionally lift and/or move over 20 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, color vision, depth perception, and the ability to adjust and focus. An annual eye exam is required. EEO M/F/D/V Custom Control Sensors, LLC. is an Equal Opportunity employer. All qualified applicants for employment shall receive fair and equal treatment regardless of their race (including hair texture and protective hairstyles, such as braids, locks, and twists), color, religion, creed, sex/gender, marital or registered domestic partnership status, age, national origin or ancestry, citizenship, pregnancy, childbirth, breastfeeding or related medical conditions, mental or physical disability (including HIV and AIDS), medical condition including genetic information or characteristics (including those of family members), sexual orientation, veteran or military status, gender identity, gender expression, transgender status or any other basis protected by federal, state or local law, ordinance or regulation. The policy not to discriminate includes, but is not limited to, advertising for positions, recruiting, hiring, placement, promotion, transfer, rates of pay, discipline and termination. No recruiters or recruitment agencies.

GA Telesis is a global leader providing integrated solutions to the aviation and aerospace industries. We serve over 2,000 customers, including airlines, original equipment manufacturers, maintenance, repair, and overhaul (MRO) providers, and suppliers worldwide, with 31 leasing, sales, distribution, and MRO operations in 19 countries. At GA Telesis, our core business is integrated aviation solutions, and our mission is customer success. At our Landing Gear facility in Medley, Florida, we are seeking a Machinist. This is a full-time position, responsible for using milling machines, boring mills, grinders, lathes, and precision measuring equipment to perform/alterations on aircraft parts and fabricate tools. **Important Notice: Eligibility Requirement: Only U.S. Citizens or Permanent Residents will be considered for this position. Responsibilities: Select the appropriate tools, machines, and materials to be used in the preparation of machinery work Calculate dimensions and tolerances using knowledge of mathematics and instruments such as micrometers and vernier calipers Align and secure holding fixtures, cutting tools, attachments, accessories, or materials onto machines Set up, adjust, and operate all of the basic machine tools and many specialized or advanced variation tools to perform precision machining operations Clean and lubricate machines, tools, and equipment to remove grease, rust, stains, and foreign matter Monitor the feed and speed of machines during the machining process Observe and listen to operating machines or equipment to diagnose machine malfunctions and to determine the need for adjustments or repairs Study sample parts, blueprints, drawings, and engineering information to determine methods and sequences of operations needed to repair products, and determine product dimensions and tolerances Machine parts to specifications, using machine tools, such as lathes, milling machines, shapers, or grinders Check work pieces to ensure that they are properly lubricated or cooled Position and fasten workpieces Measure, examine, or test completed units to check for defects and ensure conformance to specifications, using precision instruments, such as micrometers Confer with engineering or supervisory personnel to exchange technical information Operate equipment to verify operational efficiency Qualifications: Extensive knowledge of methods of repairing, installing, and maintaining components of aircraft articles. Skilled in performing repairs and modifications on aircraft articles. Familiar with tools and equipment appropriate for the functions performed. Ability to understand and interpret documents related to technical manuals, diagrams, and safety rules. To see what #GATelesis life is like, visit LinkedIn, Instagram, Facebook.

Job Details Phoenix - 401 Building - Phoenix, AZ Full Time None $25.00 - $32.00 Hourly 1st Shift Description CNC Machinist Reports To: Production Supervisor FLSA Status: Non-Exempt Direct Reports: None SUMMARY OF POSITION This position is responsible for providing technical assistance and oversight to all CNC machinists. This position also must operate the manual equipment This position is in Northstar's Manufacturing Department, and reports to the Production Supervisor. The position works with all levels of employees throughout the organization as necessary, but does not direct the work of other employees. This is a full-time position. ESSENTIAL DUTIES AND RESPONSIBILITIES The essential duties and responsibilities of this position are listed below. This list is not all inclusive and may be amended by Northstar, from time to time. Assist teammates with technical issues Perform precision machining operations on aerospace hardware Provides technical oversight and assist with all setup activities on CNC equipment Helps schedule resources in areas to ensure daily work is achieved Maintain highly efficient work process using Lean principles to support cost reduction activity Responsible for operating various CNC machines and equipment SUPERVISORY RESPONSIBILITIES This position will not direct the work of any other employees. PHYSICAL REQUIREMENTS The physical requirements of this position are listed below. This list is not all inclusive and may be amended by Northstar, from time to time. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential duties of the position. Frequent standing, walking, talking, hearing and seeing Frequent lifting of up to 50 pounds Frequent reaching, climbing, balancing, stooping, kneeling, crouching, pushing, pulling, fingering, grasping, feeling, twisting, bending and repetitive motion Occasional sitting, writing and typing Visual acuity to determine the accuracy and thoroughness of product and/or parts Frequent exposure to moving mechanical parts, fumes or airborne particles Frequent exposure to moderate to heavy noise The ability to wear proper personal protective equipment, including earplugs, safety glasses, safety shoes, etc. QUALIFICATIONS AND EXPERIENCE REQUIRED Education Required: High School diploma or equivalent experience Experience Required: 5 years' experience with CNC aerospace machining KNOWLEDGE, SKILLS AND ABILITIES REQUIRED AND/OR PREFERRED The knowledge, skills and abilities required and/or preferred for this position are listed below. This list is not all inclusive and may be amended by Northstar, from time to time. Excellent verbal and written communication skills Strong work ethic Attention to detail Interface with MRP systems Good understanding of Microsoft Office products Demonstrated understanding of Lean Manufacturing concepts and 6-Sigma defect analysis Ability to work with all levels of workers in a team-oriented environment