Aircraft mechanic jobs in Kannapolis, NC - 31 jobs

The USMC MQ-9 CLS Mechanic is a highly qualified and skilled aircraft/composite mechanic with experience in structures, hydraulics, engines and avionics using diagrams, blueprints, and publications. The mechanic will directly support the USMC MQ-9 Site Manager while at the same time being available to support hands-on maintenance and leadership/training on an as needed basis. **Essential Responsibilities:** + Inspect and repair power plant malfunctions, including cracked components, oil leaks, etc. + Diagnose malfunctions, isolate causes, and correct breaks. + Test engine operations, use test equipment to locate source of malfunction(s). + Replace/repair damaged components and remove engine/major components from aircraft, using hoist or other lifting devices. + Disassemble and inspect parts for wear, warping, or other defects. + Repair/replace defective engine components and reassemble and install engines in aircraft. + Adjust, repair, or replace instruments, ADP flight controls, electrical/electronics, fuel/oil systems and associated aircraft accessories. + Perform aircraft services to include engine flushing/cleaning, parts lubrication, and required maintenance checks. + May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies. + Recommend revisions to maintenance procedures to improve efficiency and ensure quality workmanship. **Minimum Qualifications:** + Must have at least an active Secret US Government clearance. Note: US Citizenship is required to obtain a Secret Clearance. + Must have High School Diploma or have completed relevant military and/or vocational technical school curriculum. + Minimum of five years of actual Aircraft Mechanic maintenance experience required. + Minimum of two years' experience on MQ-9 aircraft, as Aircraft Mechanic. + Must have advanced knowledge of basic and complex mechanical maintenance and repair. + Must possess advanced knowledge of technical publications related to aircraft mechanical maintenance. + Comprehensive knowledge of aircraft mechanical component troubleshooting/repair procedures and replacement of components, a thorough knowledge of aircraft sheet metal/structural modification and repair and the ability to determine functionality of non-complex electrical systems. + Must know theory and principles of operation of engines, accessories and components, theory of flight and electronic flight controls, and have an advanced understanding of applicable systems. + Shall have been designated a CDI or Red-X inspector for their applicable specific T/M/S UAS aircraft or equipment employed to inspect. + Shall have previous CDI, CDQAR, Organizational Maintenance experience. + Must be able to inspect and operate ground support and auxiliary equipment. + Must have knowledge of CNAFINST 4790.2 NAMP and DAFI 21-101. + Must achieve a passing grade in all required courses/certifications for continued employment, as needed. + Must be able to lift, carry and/or wear Military Issued Equipment in excess of 50 pounds for extended periods. + Must be able to speak, read, write, and understand English. + Must have current/active State Issued Driver's License. + Must be able to acquire and maintain a valid flight-line Government Driver's License. **Preferred Qualifications:** + Associate degree in a relevant career field. + Licensed by the FAA as an Airframe and Powerplant Mechanic. + Aircraft Mechanic experience within the last 10 years. + Prior experience as a Defense Contractor. + MQ-9 Aircraft Composite Repair / Replacement Experience. + NDI Qualified. Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal laws and supplemental language at Labor Laws Posters (********************************* SkbztPuAwwxfs) .

Job DescriptionAre you eager to be part of an innovative team in the aviation industry, transforming the way we approach aviation technology?Our client stands as a prominent figure in the realm of aircraft window design, manufacturing, and the production of composite parts at their cutting-edge facility. Boasting ISO 9001:2015 / AS9100D certification, they specialize in aerospace window/windshield composite intricacies, sheet metal wing spars, and fuselage assemblies.They are currently on the lookout for a Regional Repair Sales / Aircraft Window Technician possessing an A&P License in locations including Mesa, AZ, Orlando, FL, Battle Creek, MI, Provo, UT, and Greensboro, NC.What's in It for You:Salary: $45,000-$60,000 annual bonus, potential for substantial monthly incentives Position Type: Permanent - Full-time. Benefits: Comprehensive package including Medical, Dental, 401k, Disability, Company-provided life insurance, and FSA.A Glimpse into the Life of an Aircraft Technician / A&P Mechanic:As the Aircraft Technician / A&P Mechanic, your primary mission is to provide aircraft window services to our existing clients while expanding our customer base and sales within your designated Regional Market. Your responsibilities include inspecting aircraft windows, assessing defects for airworthiness, repairing scratches, pits, and other window damage, as well as removing and installing replacement windshields and windows.Key Responsibilities: Removing existing windows. Preparing and installing new windows. On-call 24/7 to respond to customer requests for emergency AOG (Aircraft on Ground) services. Utilizing an orbital sander with various grits of sandpaper to restore damaged areas. Reviewing, interpreting, and applying technical data relevant to your tasks. Managing the acquisition of purchase orders from customers as per the provided quotes. Coordinating service schedules with aircraft owners/operators and maintenance managers. Completing and submitting billing information and evaluation forms to our headquarters in Wichita, KS. Providing the necessary airworthiness documents to customers upon job completion. Traveling as required to customer locations via ground transportation, air travel, or airlines. Compiling weekly expense reports detailing costs for gasoline, entertainment, and customer relations. Signing off on all work orders and maintaining part traceability records. Conducting daily visits and/or phone communication with both current and potential customers. Developing and expanding sales in the assigned Regional Market. Seeking guidance and direction as needed for your duties. Keeping your supervisor/manager informed of the status of your work. Reporting problems and potential issues to your supervisor/manager as soon as possible. Maintaining a neat and orderly work area. Presenting a well-groomed appearance suitable for the role and context. Respecting the confidentiality of company, customer, and personnel information. Performing additional duties and tasks as assigned by your supervisor. Assisting and training other employees as required. Qualifications: Education: High School Diploma/General Education Degree (GED). Experience: Preferred sales experience, 1 year of orbital sanding experience preferred, auto body experience preferred, previous aircraft experience preferred, A&P license or AMT certificate preferred, sales experience preferred. Technical Skills: Proficiency in using various measuring devices, strong mechanical aptitude, ability to read and interpret blueprints (preferred), ability to read and interpret technical manuals. Problem Solving/Decision Making: Ability to read and comprehend mechanical and technical manuals, applying them to practical field situations. Capability to work independently and communicate effectively with both internal and external customers, delivering exceptional customer service in a timely manner. Essential Job Functions/Physical Demands: The physical demands encompass standing on wings, moving in and out of cockpits, and working inside and outside aircraft. Travel is a requirement, with working hours ranging from 2 to 12 per day depending on demand. Ability to stand and/or sit for 8 hours a day. Ability to lift/carry weights of up to 70 lbs. Ability to twist, bend, and stoop for 8 hours a day. Ability to pinch and grip various tools with fingers and hands, using pushing and pulling motions for 8 hours a day. Ability to reach for 8 hours a day. Clear and effective communication skills. Proficiency in understanding and following work orders and process specifications. Capability to handle buffing and polishing tools for 8 hours a day. Comfort with climbing up and down ladders. If you're intrigued by the Aircraft Technician / A&P Mechanic role in Mesa, AZ, Orlando, FL, Battle Creek, MI, Provo, UT, and Greensboro, NC, seize the opportunity today!This job opportunity is presented by Total Aviation Staffing, LLC, an Employment Agency providing aviation staffing services.

Training Tomorrow's Technicians to Become Skilled, Employable and Essential. About Us - Big Changes, Better Benefits - Join us today! The Aviation Institute of Maintenance (AIM), established in 1969, is a premier institution dedicated to advancing the field of aviation maintenance through exceptional education and training. With 15 campuses nationwide, AIM is a cornerstone in the aviation industry, accounting for 20% of all students attending FAA-certified Airframe & Powerplant (A&P) schools across the country. Each year, AIM proudly contributes to the graduation of nearly one in four certified aircraft technicians in America. At AIM, you'll become part of a dynamic team of educators and leaders, all united by a shared commitment to delivering top-notch training and ensuring student success. We are passionate about equipping the next generation of aircraft technicians with the skills and knowledge needed to excel in the aviation industry. If you are eager to make a meaningful impact and help shape the future of aviation maintenance, AIM offers a rewarding environment where your contributions will truly matter. Position Purpose The Aircraft Mechanic Instructor is responsible for delivering engaging and comprehensive instruction in assigned courses, ensuring that students grasp both theoretical concepts and practical applications in aircraft maintenance. In addition to teaching, the instructor manages essential administrative tasks, such as maintaining records, assessing student performance, and collaborating with faculty to enhance the curriculum. This role is pivotal in fostering a supportive learning environment that promotes student success and prepares them for careers in the aviation industry. Key Duties Provide engaging and effective teaching in aircraft maintenance principles while developing curricula that aligns with industry standards. Create a positive classroom atmosphere that encourages student participation and offers individualized support to enhance student success. Oversee administrative responsibilities, including maintaining accurate records and ensuring compliance with industry regulations and standards. This position ensures that the aircraft maintenance training program effectively prepares students for careers in aviation, aligning with industry standards and contributing to the overall success of the institution. Job Responsibilities Teach classes on a scheduled basis, creating an inclusive and welcoming environment that fosters student engagement and enhances learning in aircraft maintenance. Collaborate with the Program Coordinator, Campus Director of Education, and Campus Executive Director to develop and refine curriculum, prepare course materials, and schedule classes, ensuring alignment with industry standards. Maintain a clean, organized, and safe classroom and laboratory environment, ensuring all tools and equipment are properly maintained for student use. Establish and maintain accurate academic and attendance records for each student, submitting attendance, grades, evaluations, and other documentation as required by institutional procedures. Proactively notify the Supervisor of any current or potential issues that require immediate attention and implement proven retention techniques to support student success. Complete assigned performance-based teacher education modules, participating in classroom observations and instructor evaluations, and responding to student feedback to enhance instructional effectiveness. Attend and/or lead in-service training sessions, faculty meetings, and other mandatory gatherings to ensure ongoing professional development and collaboration with peers. Assist in managing the inventory of department equipment and supplies, submitting replenishment requests to the Supervisor or appropriate personnel as needed. Monitor student attendance closely, alerting the Supervisor to any absences, particularly at the first, third, and fifth occurrences, to address potential retention issues. Complete other tasks and projects as assigned by the Supervisor, contributing to the overall success of the aircraft maintenance program. Required Qualifications FAA Airframe and Powerplant Mechanic Certificate Minimum three (3) years of hands-on experience in aircraft maintenance (special considerations will be given for more diverse experience) High School Diploma or GED Strong command of both theoretical and practical aspects of aircraft maintenance, with contemporary knowledge and a commitment to ongoing professional development. Ability to thrive in a fast-paced, performance-driven, and compliance-oriented educational setting. Detail-oriented, analytical, and highly organized, with the capability to multitask and perform well under pressure. Demonstrate a high level of integrity, a strong work ethic, and professionalism in all interactions. Effective verbal and written communication skills, with a strong emphasis on customer service in an educational context. Highly motivated and goal-oriented, with strong problem-solving abilities. Ability to work independently as well as collaboratively within a team, exhibiting exceptional interpersonal skills. Excellent computer skills, including proficiency in MS Office applications such as Word, Excel, Outlook, SharePoint, and Teams. Willingness to work outside of regular shifts, including evenings and weekends, as necessary or requested by the Supervisor. Preferred Qualifications Associate's degree in related field CampusNexus experience Work Schedule Option 1: Monday - Thursday: 6:30am - 4:30pm Option 2: Monday - Thursday: 1:30pm - 11:30pm Option 3: Friday: 1:00pm - 11:30pm, Saturday & Sunday: 8:30am -6:30pm, Monday: 7:00am- 5:00pm (Option 3 includes additional $5.00/hr shift differential) Work Environment At the Aviation Institute of Maintenance (AIM), you'll work in a modern, supportive environment dedicated to top-notch aviation education. Our campus features state-of-the-art facilities and offers a professional yet engaging setting for both staff and students. Our team thrives on collaboration and innovation. We value teamwork, continuous learning, and a strong sense of community. You'll have the opportunity to make a real impact on our students' success while enjoying the dynamic lifestyle the city offers. Join us at AIM to be part of a dedicated team and advance your career in a thriving city. What We Offer The compensation for this position averages $33.65 per hour (option 3, weekends, includes additional $5/hr pay differential) , based on experience, qualifications, and other relevant factors. New hires also receive a $2,500 sign-on bonus! In addition to a competitive base salary, we offer a comprehensive benefits package, including: 401(k) and Matching: Secure your future with our competitive retirement savings plan. Comprehensive Health Coverage: Enjoy Health, Dental, and Vision insurance to keep you and your family healthy. Life Insurance: Peace of mind with life insurance options. Parental Leave: Support for new parents during important life transitions. Paid Time Off: Recharge with paid time off to promote work-life balance. Employee Assistance Program: Access to resources for personal and professional support. Tuition Reimbursement: Invest in your future with financial support for further education. We are committed to providing a rewarding compensation package that supports both your professional growth and personal well-being. AIM is a proud equal-opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, disability status, or any other characteristic protected by applicable law. We believe that a diverse workforce contributes to the success of our company and are dedicated to fostering a culture of respect, equity, and inclusion.

Contour Airlines is a long-established aviation services company with diverse capabilities. At Contour Airlines, our core values are at the heart of everything that we do and every decision we make. Constant throughout all of our lines of business is a commitment to integrity and safety. Our team members consistently display an attitude of excellence and the ability to think like a customer. We recognize that there is strength in unity and work together as a team to accomplish our ambitious goals. As a full-time employee of Contour Airlines: You are eligible for health, vision, and dental coverage as well as short-term/long-term disability and voluntary life insurance policies. If selected, these are effective on the first day of the month following your date of hire. Our current benefit enrollment guide will be provided during the onboarding process if you are selected for employment. You are eligible to participate in our 401(k) savings plan, which would also be effective the first day of the month following your date of hire. The Company match is up to 6%. Your eligibility to participate in this benefit will be in accordance with the normal practices and guidelines of the Company. Our current 401K enrollment guide will be provided during the onboarding process if you are selected for employment. You are eligible to receive paid sick leave. You can accrue up to 56 hours per year which will roll over each year until your sick bank reaches 480 hours. You are eligible to receive vested vacation hours. These hours are available to you on January 1 st following your date of hire. You are eligible for non-revenue/space available (NRSA) travel privileges after completing six active months of service. You are eligible for a variety of leaves of absence including medical leave, non-medical leave for the care of a family member, maternity leave, paternity leave, personal leave, etc. Specific information regarding Contour Airlines' leave of absence policy is outlined in our Employee Handbook which will be provided to you during the onboarding process should you be selected for employment. Additional information: The starting annual salary for this position is between $75,000.00 and $85,000.00 depending on your prior work experience. Each year and based on your job performance, you are eligible to receive an increase of 2.50% or more. When you work on a Contour Airlines observed holiday, you are eligible to receive holiday pay which is paid at 2 times your hourly rate. Specific information regarding Contour Airlines' observed holiday policy is outlined in our Employee Handbook which will be provided to you during the onboarding process should you be selected for employment. Contour Airlines is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to age, citizenship, color, creed, sex, national origin, race, religion, sexual orientation, political affiliation, marital status, pregnancy, pre-disposing genetic characteristics, veteran status, military status, disability, gender identity or expression, familial status, criminal history, status as a victim of domestic violence, or any other protected status. Contour Airlines understands that some applicants may need reasonable accommodations. Please contact the Human Resources Department at ***************** to discuss any specific needs that you may have. Contour Airlines' rapid growth has created exciting employment opportunities. We invite you to become part of the family. Summary of Essential Duties: Read and utilize blueprints, maintenance manuals, ATA codes, illustrated parts catalogs, service bulletins and other maintenance documents to troubleshoot and complete work assignments. Updating maintenance and repair logs Running diagnostic tests Perform routine maintenance operations or repair of the aircraft including aircraft engines, power plant and /or aircraft components according to all specifications. Perform hourly, daily, and monthly inspections and examinations of aircraft components, including de-icing, hydraulic systems and landing gear, for leaks, cracks, burned areas, foreign object damage, warping, distortions, missing segments, wear, breaks, or other issues. Perform inspections during assembly of part and after repair or installation of component. Documenting maintenance procedures to include component damage, component origin, and condition of component, components, or equipment. Practice safety conscious behaviors in all operational process and procedures. Performance of daily scheduled and non-scheduled inspections, maintenance, repair, and alterations of aircraft. Troubleshoot defective aircraft systems and components in an effective manner. Use gauges and diagnostic tests to detect malfunctions. Use power and hand tools (e.g., cranes, grinders, wrenches, etc.) Complete all tasks in the allotted time frame and to the quality standards of our company, our customers, and the FAA. Promote safety within the workplace by monitoring others and yourself to guarantee all tasks are performed within the safety manual guidelines and communicate with other mechanics and supervisors to coordinate repairs and keep apprised of safety concerns. Other duties as assigned by leadership. Work Environment: Airport ramp/warehouse environment, subject to varied weather conditions including hot or cold weather. Exposed to noise and vibrations when testing engines on a weekly basis. Physical Requirements: Frequent stooping, bending, kneeling. Standing on feet for extended periods of time Handle objects up to 70 pounds regularly, up to 100+ pounds occasionally, with assistance from co-workers or tools. Able to use stairs, scaffolding, and/or ladders of varying heights without assistance. Occasionally exposed to cramped workspaces that require getting into awkward positions. Able to work varying schedule including nights, weekends, and holidays. Shifts could be scheduled from 8 to 10 hours or more. Regularly wear protective gear, such as gloves or earmuffs. Qualifications Be at least 18 years of age. Be authorized to work in the United States and able to travel in and out of the United States. Must have a valid driver license and good driving record. FAA Airframe and Power plant license is required. Must understand, read, and write English. Possess polished and professional interpersonal skills with a positive attitude and a customer-oriented mindset Possess strong leadership and organizational skills. Must have well-developed people skills and ability to work with a variety of personalities. Able to coordinate multiple priorities and meet deadlines. Able to handle interruptions and a fast paced environment. Maintain strong attention to detail. Be self-motivated and able to motivate others Excellent communication skills both written and verbal delivered with tact and professionalism Must pass a DOT required pre-employment drug screen and willing to submit to and pass FAA and Company mandated random drug and alcohol tests. Able to pass a required 10-year work history review and submit to criminal background and fingerprint checks. Operational knowledge of laptop and desktop computers, working knowledge of Microsoft SharePoint, Word, Excel, PowerPoint, Adobe Acrobat, or related presentation programs. Operational knowledge of Outlook is required. Competency with internet navigation is also required. Ability to work in a safe professional manner adhering to all regulatory requirements including OSHA, EPA, state and federal regulations. Disclaimer: The above statements are intended only to describe the general nature and level of work required of the referenced position; they are not intended to be an exhaustive list of all responsibilities, duties, and skills required of individuals in the position. Please be advised that the duties and expectations of this position may be subject to change.

Training Tomorrow's Technicians to Become Skilled, Employable, and Essential ABOUT US - Big Changes, Better Benefits - Join us today! At Cotulla Education, home to the Aviation Institute of Maintenance, Centura College, Tidewater Tech, and American Lineman College, we are dedicated to transforming lives through hands-on, career-focused education. Our mission is to empower students to achieve their professional dreams in high-demand fields like aviation, healthcare, information technology, and skilled trades. With experienced faculty providing personalized support, our graduates emerge as future leaders ready to make a significant impact in their communities. Join us in shaping the careers of those who will build and maintain our world and embark on a transformative journey towards a fulfilling career. $2,500 relocation bonus for out-of-area hires moving to Charlotte Ready to move from the hangar to the classroom? We're looking for experienced A&P mechanics to train the next generation of aviation technicians in Charlotte, NC. If you're currently out of area and want a stable schedule, strong benefits, and the opportunity to grow with one of the Southeast's rising aviation hubs, this is your chance to make a lasting impact-without giving up your hands-on expertise. $2,500 sign-on bonus + $2,500 relocation bonus available for qualified out-of-area candidates. Position Purpose Deliver engaging instruction in aircraft maintenance, helping students master theory and hands-on skills. Maintain student records, evaluate performance, and collaborate with campus leadership to keep curriculum aligned with industry standards. Create a supportive, safety-focused learning environment that prepares graduates for aviation careers. Key Duties Provide engaging and effective teaching in aircraft maintenance principles while developing curricula that aligns with industry standards. Create a positive classroom atmosphere that encourages student participation and offers individualized support to enhance student success. Oversee administrative responsibilities, including maintaining accurate records and ensuring compliance with industry regulations and standards. Job Responsibilities Teach classes on a scheduled basis, creating an inclusive and welcoming environment that fosters student engagement and enhances learning in aircraft maintenance. Collaborate with the Program Coordinator, Campus Director of Education, and Campus Executive Director to develop and refine curriculum, prepare course materials, and schedule classes, ensuring alignment with industry standards. Maintain a clean, organized, and safe classroom and laboratory environment, ensuring all tools and equipment are properly maintained for student use. Establish and maintain accurate academic and attendance records for each student, submitting attendance, grades, evaluations, and other documentation as required by institutional procedures. Proactively notify the Supervisor of any current or potential issues that require immediate attention and implement proven retention techniques to support student success. Complete assigned performance-based teacher education modules, participating in classroom observations and instructor evaluations, and responding to student feedback to enhance instructional effectiveness. Attend and/or lead in-service training sessions, faculty meetings, and other mandatory gatherings to ensure ongoing professional development and collaboration with peers. Assist in managing the inventory of department equipment and supplies, submitting replenishment requests to the Supervisor or appropriate personnel as needed. Monitor student attendance closely, alerting the Supervisor to any absences, particularly at the first, third, and fifth occurrences, to address potential retention issues. Required Qualifications FAA Airframe & Powerplant (A&P) Certificate. Minimum 3 years of hands-on aircraft maintenance experience. High School Diploma or GED. Strong command of aircraft maintenance theory and practical application; commitment to staying current in the field. Ability to succeed in a fast-paced, compliance-driven educational setting. Detail-oriented, organized, and able to multitask. Professional, integrity-driven communicator with strong customer service and problem-solving skills. Willing to work evenings/weekends as needed. Work Schedule Option 1: Monday - Thursday: 6:30am - 4:30pm Option 2: Monday - Thursday: 1:30pm - 11:30pm Option 3: Friday: 1:00pm - 11:30pm, Saturday & Sunday: 8:30am -6:30pm, Monday: 7:00am- 5:00pm (Option 3 includes additional $5.00/hr shift differential) What We Offer Top-tier pay + real perks for experienced A&P professionals. The compensation for this position averages $33.65 per hour (option 3, weekends, includes additional $5/hr pay differential) , based on experience, qualifications, and other relevant factors. $2,500 Sign-On Bonus for new instructors. $2,500 Relocation Bonus for qualified out-of-area hires moving to Charlotte, NC. Benefits That Support You On and Off the Job 401(k) with Company Match - build long-term security. Medical, Dental & Vision Insurance - comprehensive coverage for you and your family. Life Insurance - added peace of mind. Parental Leave - support for growing families. Paid Time Off (PTO) - recharge and maintain work-life balance. Employee Assistance Program (EAP) - confidential personal and professional resources. Tuition Reimbursement - keep learning and advancing your career. Cotulla Education is a proud equal-opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, disability status, or any other characteristic protected by applicable law. We believe that a diverse workforce contributes to the success of our company and are dedicated to fostering a culture of respect, equity, and inclusion.

We are seeking Aircraft Maintenance Technicians who want to join our team as we build a culture of passionate commitment to execution, simplicity, and customer loyalty at Avelo Airlines. We are a brand-new, high value/low fare airline growing throughout the U.S. You will have a key role in creating an airline our Crewmembers are proud of because we deliver a great customer experience with execution our customers know they can count on. Purpose: As an Avelo Aircraft Maintenance Technician, you will ensure the safe, compliant, on-time and efficient maintenance of Avelo aircraft at the line maintenance level. This is achieved by coordinating and executing aircraft maintenance, open transparent communication, and maintaining safety and compliance as Avelo's first line of defense. The Technician will foster and develop teamwork and leadership that embraces our company's "Purpose, Vision, and Values" Responsibilities: * Maintain an understanding of the maintenance program * Coordinate and execute scheduled and unscheduled work loads * Assume "ownership" of the aircraft while on duty * Maintain open communication with Team Leads, Maintenance Control and Pilots * Demonstrated knowledge of Structural Repair Manual conditional use and damage assessment * Participate in the Safety Management System (SMS) Program and promote a 'Safety Always' culture * Understands compliance of FAA Regulatory requirements as it pertains to planning tasks against aircraft daily Requirements * High School diploma (or equivalent * FAA Airframe & Powerplant (A&P) license required * Knowledge of aircraft systems and troubleshooting and MEL/CDL procedures * Must be able to lift 50 lbs. for a distance of 10 feet * Must be able to work outside in inclement weather * Must be able to work shift work, weekends, and holidays * Possible travel for training, deployment and/or issue resolution up to 25% away from base * Must provide own hand tools to meet minimum company tool list * Possesses strong critical thinking and problem-solving/troubleshooting skills * Ability to clearly lead, mentor and instruct other Crew Members * Strong written and verbal communication skills * Current and Valid Driver's License required * Must have the authority to work in the U.S as defined in the Immigrations Act of 1986 * Must be able to complete a background check and pre-employment drug screen X-FACTORS: * 3 years of experience on different types of aircraft with 10 or more seat with an air carrier or certificated repair station preferred * Boeing Systems Fam courses preferred * 737 Line maintenance preferred May perform other responsibilities as assigned. Responsibilities and duties may change when circumstances dictate (e.g., emergencies, changes in workload, etc.). Avelo is an equal opportunity employer. Salary Description $32-$40 per hour based on years of experience

We are seeking Aircraft Maintenance Technicians who want to join our team as we build a culture of passionate commitment to execution, simplicity, and customer loyalty at Avelo Airlines. We are a brand-new, high value/low fare airline growing throughout the U.S. You will have a key role in creating an airline our Crewmembers are proud of because we deliver a great customer experience with execution our customers know they can count on. Purpose: As an Avelo Aircraft Maintenance Technician, you will ensure the safe, compliant, on-time and efficient maintenance of Avelo aircraft at the line maintenance level. This is achieved by coordinating and executing aircraft maintenance, open transparent communication, and maintaining safety and compliance as Avelo's first line of defense. The Technician will foster and develop teamwork and leadership that embraces our company's “Purpose, Vision, and Values” Responsibilities: Maintain an understanding of the maintenance program Coordinate and execute scheduled and unscheduled work loads Assume “ownership” of the aircraft while on duty Maintain open communication with Team Leads, Maintenance Control and Pilots Demonstrated knowledge of Structural Repair Manual conditional use and damage assessment Participate in the Safety Management System (SMS) Program and promote a ‘Safety Always' culture Understands compliance of FAA Regulatory requirements as it pertains to planning tasks against aircraft daily Requirements High School diploma (or equivalent FAA Airframe & Powerplant (A&P) license required Knowledge of aircraft systems and troubleshooting and MEL/CDL procedures Must be able to lift 50 lbs. for a distance of 10 feet Must be able to work outside in inclement weather Must be able to work shift work, weekends, and holidays Possible travel for training, deployment and/or issue resolution up to 25% away from base Must provide own hand tools to meet minimum company tool list Possesses strong critical thinking and problem-solving/troubleshooting skills Ability to clearly lead, mentor and instruct other Crew Members Strong written and verbal communication skills Current and Valid Driver's License required Must have the authority to work in the U.S as defined in the Immigrations Act of 1986 Must be able to complete a background check and pre-employment drug screen X-FACTORS: 3 years of experience on different types of aircraft with 10 or more seat with an air carrier or certificated repair station preferred Boeing Systems Fam courses preferred 737 Line maintenance preferred May perform other responsibilities as assigned. Responsibilities and duties may change when circumstances dictate (e.g., emergencies, changes in workload, etc.). Avelo is an equal opportunity employer. Salary Description $32-$40 per hour based on years of experience

Please call/text Mandy Dreasky at ************** to discuss opportunity in further detail and/or send resume to ****************** HSGI, Inc. has IMMEDIATE Airframe & Powerplant Mechanic positions available! The Aircraft Maintenance Technician reports directly to the Crew Chief for task assignments and is responsible for the timely and efficient completion of all assigned duties. The A&P Mechanic carries out tasks in accordance with work scope requirements, adhering to established quality standards and utilizing the appropriate technical documentation. Responsibilities include, but are not limited to, maintenance and inspection, servicing and lubrication, troubleshooting, repairs and modifications, as well as fueling and de-fueling operations. Experience on Dassault Falcon Jet, Gulfstream, Citation, Bombardier, Lear Jet, Challenger, Global Express, Hawker Beechcraft, Embraer, etc., would be a plus and an immediate hire! For immediate consideration, call/text Mandy Dreasky at ************** and email your resume to ****************** Very Urgent Job Opportunity! Serious and experienced A&P Mechanic with Airframe & Powerplant License. Lear Jet, Dassault Falcon Jet, Gulfstream, Citation, Bombardier, Hawker Beechcraft, Embraer, etc. Aircraft Mechanics! DUTIES & RESPONSIBILITIES: Under minimal supervision, performs inspections, maintenance, and repairs of moderate to advanced complexity on aircraft systems and structures Communicate as required to receive and understand work assignments Perform complex aircraft inspections, repairs, and modifications with minimal supervision Coordinate with other departments as needed to ensure compliance with internal and FAA inspection and documentation requirements Properly complete work order sign-offs and other paperwork in a timely and accurate manner. Ensure that all work accomplished meets quality standards and specifications MINIMUM REQUIRED QUALIFICATIONS: High school diploma or equivalent. FAA Mechanics Certificate with Airframe and Powerplant Rating. Read and interpret aircraft diagrams, charts and schematics. Lift up to 50 lbs. Must not be allergic to fuels, oils, hydraulic fluids and cleaning solvents. Work and bend in confined work space. Must have manual dexterity required for technician. Must be able to repeatedly enter and exit aircraft using stationary steps/stairs. ADDITIONAL DESIRED QUALIFICATIONS: Knowledgeable and experienced using computers and aircraft software. Successful completion of at least one (1) Maintenance School is a plus. Engine Run and Taxi qualified on business jet aircraft, preferably on Dassault Falcon Jet, Gulfstream, Citation, Bombardier, Lear Jet, Challenger, Global Express, Hawker Beechcraft, Embraer, etc. aircraft is a plus. ABOUT US: We care about you and your career, we care about you and the ones you care for, our success is your success, you are not just a contractor you're a valued team member and part of our family we look forward to working with you soon! HSGI, Inc. is a Full Service Aerospace, Engineering & IT Staffing & Consulting Firm supplying qualified technical and professional employees to the most reputable companies in the Aerospace/Aircraft industry-across the United States and abroad. Give Mandy Dreasky a call/text at ************** and email your resume to ******************

The Aircraft Maintenance Technician II applies comprehensive knowledge and expertise to perform maintenance, repairs and logistical coordination of moderate to expert level of complexity for fixed and rotor wing aircraft. This position works closely with other aviation maintenance staff and leadership to perform duties in accordance with Intermountain policies and procedures, Federal Aviation Administration (FAA) regulations and manufacturer recommendations. Essential Functions Performs maintenance of an intermediate complexity on rotor and/or fixed wing aircraft systems and components at home base and satellite locations. Proficient in effective and efficient troubleshooting and repair techniques to complete rotor and/or fixed wing aircraft repairs. Applies comprehensive knowledge of complex regulatory requirements pertaining to rotor and/or fixed wing aircraft maintenance. Works autonomously, with little supervision in a fast-paced work environment in a timely manner Schedules, coordinates, and completes scheduled maintenance and inspections in a timely manner. May be required to complete RII inspections. Documents, maintains, and completes aircraft records in accordance with FAA and Intermountain requirements. Tracks aircraft inspection, component due times, and completion of tasks in computer database. Maintains company-owned special tools and equipment in good working order. Ensures calibration requirements are met. Assists as requested in the transport of equipment and supplies, including, but not limited to medical equipment. Maintains up-to-date knowledge of trends and new developments in the aviation field. Coordinates with Maintenance Control for scheduled and unscheduled events. Skills Aircraft Maintenance / Repair Technical Interpretation of manuals and schematics. Intermediate computer proficiency Troubleshooting Detail oriented Analytical Decision making Multitasking Communication Minimum Qualifications Must hold a current FAA Airframe and Power Plant certificate Demonstrated experience working as an airframe maintenance technician, lead technician or aircraft maintenance supervisor Preferred Qualifications Minimum of 3 years working as an aircraft maintenance technician, lead technician or aircraft maintenance supervisor Factory engine and airframe training in light/ medium helicopters, turboprop fixed wing, transport category jet aircraft Bachelor's degree in aviation related field. Schedule 8x6 Must be able to lift items weighing up to 25 pounds. Ongoing need for employee to see and read information, labels, monitors, identify equipment and supplies, and be able to assess customer needs. Frequent interactions with customers that require employee to communicate as well as understand spoken information, alarms, needs, and issues quickly and accurately. Manual dexterity of hands and fingers to manipulate complex and delicate equipment with precision and accuracy. This includes frequent computer, phone, and cable set-up and use. Expected to lift and utilize full range of movement to transport, pull, and push equipment. Will also work on hands and knees and bend to set-up, troubleshoot, lift, and carry supplies and equipment. Typically includes items of varying weights, up to and including heavy items. For roles requiring driving: Expected to drive a vehicle which requires sitting, seeing and reading signs, traffic signals, and other vehicles. #medtransport Location: Rock Hill Air Base Work City: Rock Hill Work State: South Carolina Scheduled Weekly Hours: 40 The hourly range for this position is listed below. Actual hourly rate dependent upon experience. $37.25 - $56.68 We care about your well-being - mind, body, and spirit - which is why we provide our caregivers a generous benefits package that covers a wide range of programs to foster a sustainable culture of wellness that encompasses living healthy, happy, secure, connected, and engaged. Learn more about our comprehensive benefits package here. Intermountain Health is an equal opportunity employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, age, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. At Intermountain Health, we use the artificial intelligence ("AI") platform, HiredScore to improve your job application experience. HiredScore helps match your skills and experiences to the best jobs for you. While HiredScore assists in reviewing applications, all final decisions are made by Intermountain personnel to ensure fairness. We protect your privacy and follow strict data protection rules. Your information is safe and used only for recruitment. Thank you for considering a career with us and experiencing our AI-enhanced recruitment process. All positions subject to close without notice.

West Star is the fastest-growing maintenance, repair organization in the industry, and we recognize this is the result of our talented team of trusted employees working together to deliver customer service excellence. We are committed to providing our employees with personal and professional growth opportunities while fostering a culture of respect and well-being with a small company feel. When you join our team, we don't think you should have to wait for your benefits to kick in. That's why when you start, they start with you! This includes medical, dental, 401K match, time off accruals, weekly pay days, and much more. We don't want you to live to work; we want you to work and live. What you can expect as a Lead Aircraft Maintenance Technician at West Star: We are hiring for multiple positions, with potential openings across various shifts. As a Lead, your main focus will be centered on leading a team of technicians to produce timely results that are of the highest quality and accuracy. The most successful individuals will be highly analytical, inquiring, and have a critical mind. This job requires imagination and strong problem-solving skills, with a strong technical orientation. Getting the job done and getting it done right are the two equal drivers for this job. Effectively utilizing manpower and directing project flow will be your primary function. You will be ESSENTIAL to many FUNCTIONS, including: * Lead the team to complete the necessary jobs/tasks. This includes using good judgment in handling day-to-day tasks and knowing when to involve your manager * Implement a strong turnover of work to the next shift * Look for opportunities (within your area of responsibility) to reduce the turn time of aircraft * Help to train/mentor those technicians assigned to your projects * Supervise team members in daily work load. * Work independently on projects and lead multiple projects as assigned. Schedule and work quality are essential in these functions, as is showing excellent drive and initiative. * Perform general mechanical functions on aircraft and related systems. This shall include, but not be limited to, items such as removal and installation of panels and components, repair work, and sheet metal repair or installation. * Troubleshooting and evaluation of systems on the aircraft when designated. * Inspection and evaluation of the aircraft and components when designated. * Aircraft movement, performance runs, and taxiing when required. * Maintenance and repair of shop facility, equipment, and tooling to support operations. * Work with customers in project management, pricing, and customer support roles. * Effectively and communicate (i.e., speak, write, read) in English * Any other job-related duties as assigned by supervisor or management. What you'll need to bring with you: Your Education * A High school diploma or equivalent and an Airframe and Powerplant License are required. * A valid driver's license approved for airline travel and/or a valid passport is ideal, but not mandatory. * Aircraft-specific factory training is preferred. Your Experience * A minimum of 3-5 years of prior aircraft maintenance experience is preferred, including supervisory responsibilities for teams of four or more. * An advanced knowledge of FAA paperwork, work orders, and the use of Corridor systems. Your Initiative: We're looking for a team player who is self-motivated and able to perform in a fast-paced environment where working under specific deadlines and time constraints will be common. Your Sense of Responsibility: * Attend work every day as scheduled to include overtime and weekend assignments. * Notify supervisor in advance of shift starting if unable to work. * Must have reliable transportation to get to work each and every day. * Must perform all work in accordance with Federal Aviation Administration guidelines. * Follow all company and safety rules during the performance of duties. * Maintain customer-oriented work habits. * Direct the work and flow of multiple projects. * Supervision of team members in daily operations and duties. * Completion of work orders, FAA paperwork. Other Particulars: Physical Requirements * Lift at least 50 lbs. * Routine walking, bending and squatting, or sitting. * Routing or repetitive physical motion with arms and hands. * Basic personal computer operations. Mental Requirements * Understanding and implementation of regulations and guidelines. * Troubleshoot or evaluate system operation. * Professionally work with others. * Coordinate projects. * Team management skills. Supervision * Will directly supervise multiple technicians. * Will work under the supervision of the assigned Team Leader and Operations Manager. * Work with other Team Leaders on multiple projects in a cooperative manner. Working Conditions * The majority of work will be accomplished in a hangar environment, which can include very hot or very cold temperatures. * Work outside during aircraft runs will occur. * Varied positions in and around the aircraft. Equipment Used * Personal hand tools supplied by the mechanic. * Pneumatic, hydraulic, and electrical equipment. * Jacks, stands, lifts, and other support devices. * Tugs, power carts, and other engine-powered equipment. * Personal computer and work order prints. The lists above include the main items for this job position to be successful, but are not limited to other things that might arise over time. The person applying for this position must understand that the objectives, responsibilities, and requirements could change for better success for the company and the person. West Star Aviation is an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran status, or disability status.

The Aircraft Maintenance Technician II applies comprehensive knowledge and expertise to perform maintenance, repairs and logistical coordination of moderate to expert level of complexity for fixed and rotor wing aircraft. This position works closely with other aviation maintenance staff and leadership to perform duties in accordance with Intermountain policies and procedures, Federal Aviation Administration (FAA) regulations and manufacturer recommendations. **Essential Functions** + Performs maintenance of an intermediate complexity on rotor and/or fixed wing aircraft systems and components at home base and satellite locations. + Proficient in effective and efficient troubleshooting and repair techniques to complete rotor and/or fixed wing aircraft repairs. + Applies comprehensive knowledge of complex regulatory requirements pertaining to rotor and/or fixed wing aircraft maintenance. + Works autonomously, with little supervision in a fast-paced work environment in a timely manner + Schedules, coordinates, and completes scheduled maintenance and inspections in a timely manner. May be required to complete RII inspections. + Documents, maintains, and completes aircraft records in accordance with FAA and Intermountain requirements. + Tracks aircraft inspection, component due times, and completion of tasks in computer database. + Maintains company-owned special tools and equipment in good working order. Ensures calibration requirements are met. + Assists as requested in the transport of equipment and supplies, including, but not limited to medical equipment. + Maintains up-to-date knowledge of trends and new developments in the aviation field. + Coordinates with Maintenance Control for scheduled and unscheduled events. **Skills** + Aircraft Maintenance / Repair + Technical Interpretation of manuals and schematics. + Intermediate computer proficiency + Troubleshooting + Detail oriented + Analytical + Decision making + Multitasking + Communication **Minimum Qualifications** + Must hold a current FAA Airframe and Power Plant certificate + Demonstrated experience working as an airframe maintenance technician, lead technician or aircraft maintenance supervisor **Preferred Qualifications** + Minimum of 3 years working as an aircraft maintenance technician, lead technician or aircraft maintenance supervisor + Factory engine and airframe training in light/ medium helicopters, turboprop fixed wing, transport category jet aircraft + Bachelor's degree in aviation related field. **Schedule** + 8x6 + Must be able to lift items weighing up to 25 pounds. + Ongoing need for employee to see and read information, labels, monitors, identify equipment and supplies, and be able to assess customer needs. + Frequent interactions with customers that require employee to communicate as well as understand spoken information, alarms, needs, and issues quickly and accurately. + Manual dexterity of hands and fingers to manipulate complex and delicate equipment with precision and accuracy. This includes frequent computer, phone, and cable set-up and use. + Expected to lift and utilize full range of movement to transport, pull, and push equipment. Will also work on hands and knees and bend to set-up, troubleshoot, lift, and carry supplies and equipment. Typically includes items of varying weights, up to and including heavy items. + For roles requiring driving: Expected to drive a vehicle which requires sitting, seeing and reading signs, traffic signals, and other vehicles. #medtransport **Location:** Rock Hill Air Base **Work City:** Rock Hill **Work State:** South Carolina **Scheduled Weekly Hours:** 40 The hourly range for this position is listed below. Actual hourly rate dependent upon experience. $37.25 - $56.68 We care about your well-being - mind, body, and spirit - which is why we provide our caregivers a generous benefits package that covers a wide range of programs to foster a sustainable culture of wellness that encompasses living healthy, happy, secure, connected, and engaged. Learn more about our comprehensive benefits package here (***************************************************** . Intermountain Health is an equal opportunity employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, age, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. At Intermountain Health, we use the artificial intelligence ("AI") platform, HiredScore to improve your job application experience. HiredScore helps match your skills and experiences to the best jobs for you. While HiredScore assists in reviewing applications, all final decisions are made by Intermountain personnel to ensure fairness. We protect your privacy and follow strict data protection rules. Your information is safe and used only for recruitment. Thank you for considering a career with us and experiencing our AI-enhanced recruitment process. All positions subject to close without notice.

Let your career take off with PSA Airlines About PSA PSA Airlines, a wholly owned subsidiary of American Airlines, offers unparalleled opportunities for growth and professional development. We value teamwork, diversity, and inclusivity and strive to create a safe, respectful, and happy work environment for our more than 4,000 employees. Our company culture, known as The PSA Way, is our foundation for operation and fosters stability, growth and a focus on the future while always placing safety at the forefront of everything we do. We are driven in our goals and achievements, eager to be better. We are reliable to one another and accountable for our actions. And we are caring in our daily interactions, with teammates, colleagues, and customers. Join our team to enjoy comprehensive benefits, including travel privileges on the American Airlines global network, so you can explore new destinations and create unforgettable memories with family and friends. Benefits PSA offers the benefits you expect from a company focused on excellence. All eligible team members enjoy a comprehensive benefits package, including: * Travel privileges on the American Airlines global network * A generous vacation plan designed to let you enjoy your travel perks * 401(k) with company match * American Airlines Group (AAG) profit-sharing and bonus opportunities * A choice of three health plan options, all with nationwide coverage with the UnitedHealthcare Choice Plus network * Premium dental coverage * Vision plan options provided, including a plan that covers both glasses and contacts every year * Benefits navigation services, including finding a doctor, scheduling an appointment, understanding your medical bills, and free second opinion services * Access to 24-hour virtual urgent care services * Family planning and fertility treatment * LGBTQ+ friendly services including gender affirming care, assistance finding knowledgeable providers, and family planning * Company-paid Life and AD&D Insurance, Short-term and Long-term Disability, and supplemental life insurance options for spouses and dependent children * Flexible Spending Accounts for both Health Care and Dependent Care services * Comprehensive Employee Assistance Program providing a range of services, including 5 free in-person sessions with a health care professional Responsibilities Position Summary As the Airframe and Powerplant (A&P) Technician, you will impact PSA Airlines' business growth by conducting aviation repairs and services that allow for operations to be on time. By executing maintenance procedures in compliance with Federal Aviation Regulations and company standards, you are ensuring safe and reliable flights. Job Responsibilities * Will perform tasks necessary to comply with Federal Aviation Regulations and accept the responsibility for work performed by themselves and/or in conjunction with others and sign for same on the Company's approved forms. * Keep work areas clean. Return all equipment and tools to assigned areas. A&P Technicians will report all inoperative or faulty equipment to the Maintenance Supervisor or Lead Mechanic in charge. * Work will consist of and include any and all phases of repair and maintenance of aircraft with the aid of the employee's own tools, specialty tools provided by the Company, the use of test equipment, and Company-supplied technical manuals. * In certain cases, and A&P Technician may be authorized to perform required inspection items and assist in Company training programs. * Will at the commencement of each repair or inspection initiate the proper documentation. Parts tags will include a complete description of the discrepancy on all removed parts. Determine if the work to be performed is a Required Inspection Item. * Verifying, through proper documentation, that any part installed on any aircraft or component is approved for that aircraft or component and has been visually inspected and is free of damage or contamination. * Assure that hangar workshops and other areas assigned are maintained in an orderly manner. * Responsible for the Company's Security and Safety Management System (SMS) and associated Safety Risk Management and Safety Assurance outputs. * Perform other duties as assigned by the Maintenance Supervisor through the Lead Mechanic. Position Specifics Qualifications Required * Current FAA Airframe and Powerplant certification. * High school diploma or equivalent. * Valid, state-issued Driver's License. * Capable of using respirators and other personal protective equipment including eye and hearing protection. * Must possess or have ability to obtain a U.S. Passport or equivalent within 90 days of starting position. * Must be able to speak, read, and write in English. * Must be able to demonstrate authorization to work in the U.S. Preferred * Previous experience with CRJs Additional Information Work Environment: This job operates inside a climate controlled building. This role routinely uses standard office equipment such as computers, telephones, photocopiers, facsimile machines and filing cabinets.Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk or hear. This is largely a sedentary role; however, the employee is frequently required to stand; walk; climb up and down stairs; lift weight up to 25 lbs; use hands to handle or feel; and reach with hands and arms.Security Clearance: All employees are required to pass the fingerprint-based criminal history records check (CHRC) per 49CFR1542.209. AAP/EEO Statement: PSA Airlines is an equal opportunity employer; qualified applicants are considered for and treated during employment without regard to race, color, creed, religion, sex (including pregnancy, gender identity and sexual orientation), national origin, citizenship status, age, disability, genetic information, protected veteran status or any other characteristic protected by law.Other Duties: Please note this job description is not designated to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

The USMC MQ-9 CLS Mechanic is a highly qualified and skilled aircraft/composite mechanic with experience in structures, hydraulics, engines and avionics using diagrams, blueprints, and publications. The mechanic will directly support the USMC MQ-9 Site Manager while at the same time being available to support hands-on maintenance and leadership/training on an as needed basis. Essential Responsibilities: Inspect and repair power plant malfunctions, including cracked components, oil leaks, etc. Diagnose malfunctions, isolate causes, and correct breaks. Test engine operations, use test equipment to locate source of malfunction(s). Replace/repair damaged components and remove engine/major components from aircraft, using hoist or other lifting devices. Disassemble and inspect parts for wear, warping, or other defects. Repair/replace defective engine components and reassemble and install engines in aircraft. Adjust, repair, or replace instruments, ADP flight controls, electrical/electronics, fuel/oil systems and associated aircraft accessories. Perform aircraft services to include engine flushing/cleaning, parts lubrication, and required maintenance checks. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies. Recommend revisions to maintenance procedures to improve efficiency and ensure quality workmanship. Minimum Qualifications: Must have at least an active Secret US Government clearance. Note: US Citizenship is required to obtain a Secret Clearance. Must have High School Diploma or have completed relevant military and/or vocational technical school curriculum. Minimum of five years of actual Aircraft Mechanic maintenance experience required. Minimum of two years' experience on MQ-9 aircraft, as Aircraft Mechanic. Must have advanced knowledge of basic and complex mechanical maintenance and repair. Must possess advanced knowledge of technical publications related to aircraft mechanical maintenance. Comprehensive knowledge of aircraft mechanical component troubleshooting/repair procedures and replacement of components, a thorough knowledge of aircraft sheet metal/structural modification and repair and the ability to determine functionality of non-complex electrical systems. Must know theory and principles of operation of engines, accessories and components, theory of flight and electronic flight controls, and have an advanced understanding of applicable systems. Shall have been designated a CDI or Red-X inspector for their applicable specific T/M/S UAS aircraft or equipment employed to inspect. Shall have previous CDI, CDQAR, Organizational Maintenance experience. Must be able to inspect and operate ground support and auxiliary equipment. Must have knowledge of CNAFINST 4790.2 NAMP and DAFI 21-101. Must achieve a passing grade in all required courses/certifications for continued employment, as needed. Must be able to lift, carry and/or wear Military Issued Equipment in excess of 50 pounds for extended periods. Must be able to speak, read, write, and understand English. Must have current/active State Issued Driver's License. Must be able to acquire and maintain a valid flight-line Government Driver's License. Preferred Qualifications: Associate degree in a relevant career field. Licensed by the FAA as an Airframe and Powerplant Mechanic. Aircraft Mechanic experience within the last 10 years. Prior experience as a Defense Contractor. MQ-9 Aircraft Composite Repair / Replacement Experience. NDI Qualified. Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal laws and supplemental language at Labor Laws Posters.

Training Tomorrow's Technicians to Become Skilled, Employable and Essential. About Us - Big Changes, Better Benefits - Join us today! The Aviation Institute of Maintenance (AIM), established in 1969, is a premier institution dedicated to advancing the field of aviation maintenance through exceptional education and training. With 15 campuses nationwide, AIM is a cornerstone in the aviation industry, accounting for 20% of all students attending FAA-certified Airframe & Powerplant (A&P) schools across the country. Each year, AIM proudly contributes to the graduation of nearly one in four certified aircraft technicians in America. At AIM, you'll become part of a dynamic team of educators and leaders, all united by a shared commitment to delivering top-notch training and ensuring student success. We are passionate about equipping the next generation of aircraft technicians with the skills and knowledge needed to excel in the aviation industry. If you are eager to make a meaningful impact and help shape the future of aviation maintenance, AIM offers a rewarding environment where your contributions will truly matter. $2,500 relocation bonus for out-of-area hires moving to Charlotte Ready to move from the hangar to the classroom? We're looking for experienced A&P mechanics to train the next generation of aviation technicians in Charlotte, NC. If you're currently in Greenville/Spartanburg, SC and want a stable schedule, strong benefits, and the opportunity to grow with one of the Southeast's rising aviation hubs, this is your chance to make a lasting impact-without giving up your hands-on expertise. $2,500 sign-on bonus + $2,500 relocation bonus available for qualified out-of-area candidates. Position Purpose Deliver engaging instruction in aircraft maintenance, helping students master theory and hands-on skills. Maintain student records, evaluate performance, and collaborate with campus leadership to keep curriculum aligned with industry standards. Create a supportive, safety-focused learning environment that prepares graduates for aviation careers. Key Duties Provide engaging and effective teaching in aircraft maintenance principles while developing curricula that aligns with industry standards. Create a positive classroom atmosphere that encourages student participation and offers individualized support to enhance student success. Oversee administrative responsibilities, including maintaining accurate records and ensuring compliance with industry regulations and standards. Job Responsibilities Teach classes on a scheduled basis, creating an inclusive and welcoming environment that fosters student engagement and enhances learning in aircraft maintenance. Collaborate with the Program Coordinator, Campus Director of Education, and Campus Executive Director to develop and refine curriculum, prepare course materials, and schedule classes, ensuring alignment with industry standards. Maintain a clean, organized, and safe classroom and laboratory environment, ensuring all tools and equipment are properly maintained for student use. Establish and maintain accurate academic and attendance records for each student, submitting attendance, grades, evaluations, and other documentation as required by institutional procedures. Proactively notify the Supervisor of any current or potential issues that require immediate attention and implement proven retention techniques to support student success. Complete assigned performance-based teacher education modules, participating in classroom observations and instructor evaluations, and responding to student feedback to enhance instructional effectiveness. Attend and/or lead in-service training sessions, faculty meetings, and other mandatory gatherings to ensure ongoing professional development and collaboration with peers. Assist in managing the inventory of department equipment and supplies, submitting replenishment requests to the Supervisor or appropriate personnel as needed. Monitor student attendance closely, alerting the Supervisor to any absences, particularly at the first, third, and fifth occurrences, to address potential retention issues. Required Qualifications FAA Airframe & Powerplant (A&P) Certificate. Minimum 3 years of hands-on aircraft maintenance experience. High School Diploma or GED. Strong command of aircraft maintenance theory and practical application; commitment to staying current in the field. Ability to succeed in a fast-paced, compliance-driven educational setting. Detail-oriented, organized, and able to multitask. Professional, integrity-driven communicator with strong customer service and problem-solving skills. Willing to work evenings/weekends as needed. Work Schedule Option 1: Monday - Thursday: 6:30am - 4:30pm Option 2: Monday - Thursday: 1:30pm - 11:30pm Option 3: Friday: 1:00pm - 11:30pm, Saturday & Sunday: 8:30am -6:30pm, Monday: 7:00am- 5:00pm (Option 3 includes additional $5.00/hr shift differential) Work Location (onsite) 7421 E Independence Blvd, Charlotte, NC 28227 What We Offer Top-tier pay + real perks for experienced A&P professionals. The compensation for this position averages $33.65 per hour (option 3, weekends, includes additional $5/hr pay differential) , based on experience, qualifications, and other relevant factors. $2,500 Sign-On Bonus for new instructors. $2,500 Relocation Bonus for qualified out-of-area hires moving to Charlotte, NC. Benefits That Support You On and Off the Job 401(k) with Company Match - build long-term security. Medical, Dental & Vision Insurance - comprehensive coverage for you and your family. Life Insurance - added peace of mind. Parental Leave - support for growing families. Paid Time Off (PTO) - recharge and maintain work-life balance. Employee Assistance Program (EAP) - confidential personal and professional resources. Tuition Reimbursement - keep learning and advancing your career. AIM is a proud equal-opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, disability status, or any other characteristic protected by applicable law. We believe that a diverse workforce contributes to the success of our company and are dedicated to fostering a culture of respect, equity, and inclusion.

Contour Airlines is a long-established aviation services company with diverse capabilities. At Contour Airlines, our core values are at the heart of everything that we do and every decision we make. Constant throughout all of our lines of business is a commitment to integrity and safety. Our team members consistently display an attitude of excellence and the ability to think like a customer. We recognize that there is strength in unity and work together as a team to accomplish our ambitious goals. As a full-time employee of Contour Airlines: * You are eligible for health, vision, and dental coverage as well as short-term/long-term disability and voluntary life insurance policies. If selected, these are effective on the first day of the month following your date of hire. Our current benefit enrollment guide will be provided during the onboarding process if you are selected for employment. * You are eligible to participate in our 401(k) savings plan, which would also be effective the first day of the month following your date of hire. The Company match is up to 6%. Your eligibility to participate in this benefit will be in accordance with the normal practices and guidelines of the Company. Our current 401K enrollment guide will be provided during the onboarding process if you are selected for employment. * You are eligible to receive paid sick leave. You can accrue up to 56 hours per year which will roll over each year until your sick bank reaches 480 hours. * You are eligible to receive vested vacation hours. These hours are available to you on January 1st following your date of hire. * You are eligible for non-revenue/space available (NRSA) travel privileges after completing six active months of service. * You are eligible for a variety of leaves of absence including medical leave, non-medical leave for the care of a family member, maternity leave, paternity leave, personal leave, etc. Specific information regarding Contour Airlines' leave of absence policy is outlined in our Employee Handbook which will be provided to you during the onboarding process should you be selected for employment. Additional information: * The starting annual salary for this position is between $75,000.00 and $85,000.00 depending on your prior work experience. Each year and based on your job performance, you are eligible to receive an increase of 2.50% or more. * When you work on a Contour Airlines observed holiday, you are eligible to receive holiday pay which is paid at 2 times your hourly rate. Specific information regarding Contour Airlines' observed holiday policy is outlined in our Employee Handbook which will be provided to you during the onboarding process should you be selected for employment. Contour Airlines is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to age, citizenship, color, creed, sex, national origin, race, religion, sexual orientation, political affiliation, marital status, pregnancy, pre-disposing genetic characteristics, veteran status, military status, disability, gender identity or expression, familial status, criminal history, status as a victim of domestic violence, or any other protected status. Contour Airlines understands that some applicants may need reasonable accommodations. Please contact the Human Resources Department at ***************** to discuss any specific needs that you may have. Contour Airlines' rapid growth has created exciting employment opportunities. We invite you to become part of the family. Summary of Essential Duties: * Read and utilize blueprints, maintenance manuals, ATA codes, illustrated parts catalogs, service bulletins and other maintenance documents to troubleshoot and complete work assignments. * Updating maintenance and repair logs * Running diagnostic tests * Perform routine maintenance operations or repair of the aircraft including aircraft engines, power plant and /or aircraft components according to all specifications. * Perform hourly, daily, and monthly inspections and examinations of aircraft components, including de-icing, hydraulic systems and landing gear, for leaks, cracks, burned areas, foreign object damage, warping, distortions, missing segments, wear, breaks, or other issues. * Perform inspections during assembly of part and after repair or installation of component. * Documenting maintenance procedures to include component damage, component origin, and condition of component, components, or equipment. * Practice safety conscious behaviors in all operational process and procedures. * Performance of daily scheduled and non-scheduled inspections, maintenance, repair, and alterations of aircraft. * Troubleshoot defective aircraft systems and components in an effective manner. * Use gauges and diagnostic tests to detect malfunctions. * Use power and hand tools (e.g., cranes, grinders, wrenches, etc.) * Complete all tasks in the allotted time frame and to the quality standards of our company, our customers, and the FAA. * Promote safety within the workplace by monitoring others and yourself to guarantee all tasks are performed within the safety manual guidelines and communicate with other mechanics and supervisors to coordinate repairs and keep apprised of safety concerns. * Other duties as assigned by leadership. Work Environment: * Airport ramp/warehouse environment, subject to varied weather conditions including hot or cold weather. * Exposed to noise and vibrations when testing engines on a weekly basis. Physical Requirements: * Frequent stooping, bending, kneeling. * Standing on feet for extended periods of time * Handle objects up to 70 pounds regularly, up to 100+ pounds occasionally, with assistance from co-workers or tools. * Able to use stairs, scaffolding, and/or ladders of varying heights without assistance. * Occasionally exposed to cramped workspaces that require getting into awkward positions. * Able to work varying schedule including nights, weekends, and holidays. Shifts could be scheduled from 8 to 10 hours or more. * Regularly wear protective gear, such as gloves or earmuffs.

West Star is the fastest-growing maintenance, repair organization in the industry, and we recognize this is the result of our talented team of trusted employees working together to deliver customer service excellence. We are committed to providing our employees with personal and professional growth opportunities while fostering a culture of respect and well-being with a small company feel. What you can expect as an Aircraft Maintenance Technician at West Star: Whether you are replacing or repairing parts, troubleshooting electrical/mechanical/hydraulic and pneumatic systems or performing inspections on some of the most sophisticated civilian aircraft in the world, no day is the same. What is the same is that each day will bring new experiences and opportunities for growth. You will be ESSENTIAL to many FUNCTIONS, including: * Performing general mechanical tasks on aircraft and related systems. * Removal and installation of panels and components. * Troubleshooting and problem-solving aircraft system/component issues. * De-fueling aircraft. * Engine removal/installations. * Operating ground support equipment. * Inspection and evaluation of the aircraft and components. * Aircraft movement and assistance in performance runs/taxiing. * Maintenance and repair of shop facility, equipment, and tooling. * Immediately notify the Lead Mechanic of any problem areas such as parts, materials, workmanship, or airworthiness issues. * Provides the Lead Mechanic with a detailed report of work progression and open items to be included in the shift turnover log. * Proper tagging of aircraft components, parts, and panels appropriately stored, including racks by aircraft. * Basic computer skills to be able to navigate electronic training, manuals, and maintenance databases. * Willing and able to work rotating shifts, including nights, holidays, weekends, and days off. * Effectively and clearly communicate (i.e., speak, write, read) in English. * Any other job-related duties as assigned by supervisor or management. What you'll need to bring with you: Your Education: A high school diploma or equivalent, and an Airframe and Powerplant License are required. A valid driver's license approved for airline travel and/or a valid passport is ideal. Your Initiative: We're looking for team players who are self-motivated and able to perform in a fast-paced environment, where working under specific deadlines and time constraints will be common. Your Sense of Responsibility: Attend work every day as scheduled, including overtime and weekend assignments. Notify supervisor in advance of shift starting if unable to work. Must have reliable transportation to get to work each and every day. Perform all work in accordance with Federal Aviation Administration guidelines. Follow all company and safety rules during the performance of duties. Maintain customer-oriented work habits. Other particulars: Physical Requirements Lifts 70 lbs. Routine walking, bending, squatting, or sitting. Routine or repetitive physical motion with arms and hands. Work on elevated platforms (up to 40 ft. in the air) using fall protection safety gear. Work in small, restricted areas. Standing for long periods of time. Mental Requirements Understanding and implementation of regulations and guidelines. Troubleshoot or evaluate system operation. Professionally work with others. Supervision Work under the supervision of the assigned Team Leader and Director of Maintenance. May be directed to supervise other technicians in some capacity. Working Conditions Work is performed in a hangar environment, subject to extreme temperature variations from very cold to very hot. Work outside during aircraft runs will occur. Varied positions in and around the aircraft. Equipment Used Personal hand tools supplied by the mechanic. Pneumatic, hydraulic, and electrical equipment. Jacks, stands, lifts, and other support devices. Tugs, power carts, and other engine-powered equipment. Lists above includes the main items for this job position to be successful, but not limited to other things that might come about in time. The person applying for this position must understand that the objectives, responsibilities, and requirements could change for better success for the company and the person. West Star Aviation is an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status.

The Aircraft Maintenance Technician II applies comprehensive knowledge and expertise to perform maintenance, repairs and logistical coordination of moderate to expert level of complexity for fixed and rotor wing aircraft. This position works closely with other aviation maintenance staff and leadership to perform duties in accordance with Intermountain policies and procedures, Federal Aviation Administration (FAA) regulations and manufacturer recommendations. **Essential Functions** + Performs maintenance of an intermediate complexity on rotor and/or fixed wing aircraft systems and components at home base and satellite locations. + Proficient in effective and efficient troubleshooting and repair techniques to complete rotor and/or fixed wing aircraft repairs. + Applies comprehensive knowledge of complex regulatory requirements pertaining to rotor and/or fixed wing aircraft maintenance. + Works autonomously, with little supervision in a fast-paced work environment in a timely manner + Schedules, coordinates, and completes scheduled maintenance and inspections in a timely manner. May be required to complete RII inspections. + Documents, maintains, and completes aircraft records in accordance with FAA and Intermountain requirements. + Tracks aircraft inspection, component due times, and completion of tasks in computer database. + Maintains company-owned special tools and equipment in good working order. Ensures calibration requirements are met. + Assists as requested in the transport of equipment and supplies, including, but not limited to medical equipment. + Maintains up-to-date knowledge of trends and new developments in the aviation field. + Coordinates with Maintenance Control for scheduled and unscheduled events. **Skills** + Aircraft Maintenance / Repair + Technical Interpretation of manuals and schematics. + Intermediate computer proficiency + Troubleshooting + Detail oriented + Analytical + Decision making + Multitasking + Communication **Minimum Qualifications** + Must hold a current FAA Airframe and Power Plant certificate + Demonstrated experience working as an airframe maintenance technician, lead technician or aircraft maintenance supervisor **Preferred Qualifications** + Minimum of 3 years working as an aircraft maintenance technician, lead technician or aircraft maintenance supervisor + Factory engine and airframe training in light/ medium helicopters, turboprop fixed wing, transport category jet aircraft + Bachelor's degree in aviation related field. **Schedule** + 8x6 + Must be able to lift items weighing up to 25 pounds. + Ongoing need for employee to see and read information, labels, monitors, identify equipment and supplies, and be able to assess customer needs. + Frequent interactions with customers that require employee to communicate as well as understand spoken information, alarms, needs, and issues quickly and accurately. + Manual dexterity of hands and fingers to manipulate complex and delicate equipment with precision and accuracy. This includes frequent computer, phone, and cable set-up and use. + Expected to lift and utilize full range of movement to transport, pull, and push equipment. Will also work on hands and knees and bend to set-up, troubleshoot, lift, and carry supplies and equipment. Typically includes items of varying weights, up to and including heavy items. + For roles requiring driving: Expected to drive a vehicle which requires sitting, seeing and reading signs, traffic signals, and other vehicles. #medtransport **Location:** Concord Air Base **Work City:** Concord **Work State:** North Carolina **Scheduled Weekly Hours:** 40 The hourly range for this position is listed below. Actual hourly rate dependent upon experience. $37.25 - $56.68 We care about your well-being - mind, body, and spirit - which is why we provide our caregivers a generous benefits package that covers a wide range of programs to foster a sustainable culture of wellness that encompasses living healthy, happy, secure, connected, and engaged. Learn more about our comprehensive benefits package here (***************************************************** . Intermountain Health is an equal opportunity employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, age, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. At Intermountain Health, we use the artificial intelligence ("AI") platform, HiredScore to improve your job application experience. HiredScore helps match your skills and experiences to the best jobs for you. While HiredScore assists in reviewing applications, all final decisions are made by Intermountain personnel to ensure fairness. We protect your privacy and follow strict data protection rules. Your information is safe and used only for recruitment. Thank you for considering a career with us and experiencing our AI-enhanced recruitment process. All positions subject to close without notice.

Let your career take off with PSA Airlines About PSA PSA Airlines, a wholly owned subsidiary of American Airlines, offers unparalleled opportunities for growth and professional development. We value teamwork, diversity, and inclusivity and strive to create a safe, respectful, and happy work environment for our more than 4,000 employees. Our company culture, known as The PSA Way, is our foundation for operation and fosters stability, growth and a focus on the future while always placing safety at the forefront of everything we do. We are driven in our goals and achievements, eager to be better. We are reliable to one another and accountable for our actions. And we are caring in our daily interactions, with teammates, colleagues, and customers. Join our team to enjoy comprehensive benefits, including travel privileges on the American Airlines global network, so you can explore new destinations and create unforgettable memories with family and friends. Benefits PSA offers the benefits you expect from a company focused on excellence. All eligible team members enjoy a comprehensive benefits package, including: Travel privileges on the American Airlines global network A generous vacation plan designed to let you enjoy your travel perks 401(k) with company match American Airlines Group (AAG) profit-sharing and bonus opportunities A choice of three health plan options, all with nationwide coverage with the UnitedHealthcare Choice Plus network Premium dental coverage Vision plan options provided, including a plan that covers both glasses and contacts every year Benefits navigation services, including finding a doctor, scheduling an appointment, understanding your medical bills, and free second opinion services Access to 24-hour virtual urgent care services Family planning and fertility treatment LGBTQ+ friendly services including gender affirming care, assistance finding knowledgeable providers, and family planning Company-paid Life and AD&D Insurance, Short-term and Long-term Disability, and supplemental life insurance options for spouses and dependent children Flexible Spending Accounts for both Health Care and Dependent Care services Comprehensive Employee Assistance Program providing a range of services, including 5 free in-person sessions with a health care professional Responsibilities Position Summary As the Airframe and Powerplant (A&P) Technician, you will impact PSA Airlines' business growth by conducting aviation repairs and services that allow for operations to be on time. By executing maintenance procedures in compliance with Federal Aviation Regulations and company standards, you are ensuring safe and reliable flights. Job Responsibilities Will perform tasks necessary to comply with Federal Aviation Regulations and accept the responsibility for work performed by themselves and/or in conjunction with others and sign for same on the Company's approved forms. Keep work areas clean. Return all equipment and tools to assigned areas. A&P Technicians will report all inoperative or faulty equipment to the Maintenance Supervisor or Lead Mechanic in charge. Work will consist of and include any and all phases of repair and maintenance of aircraft with the aid of the employee's own tools, specialty tools provided by the Company, the use of test equipment, and Company-supplied technical manuals. In certain cases, and A&P Technician may be authorized to perform required inspection items and assist in Company training programs. Will at the commencement of each repair or inspection initiate the proper documentation. Parts tags will include a complete description of the discrepancy on all removed parts. Determine if the work to be performed is a Required Inspection Item. Verifying, through proper documentation, that any part installed on any aircraft or component is approved for that aircraft or component and has been visually inspected and is free of damage or contamination. Assure that hangar workshops and other areas assigned are maintained in an orderly manner. Responsible for the Company's Security and Safety Management System (SMS) and associated Safety Risk Management and Safety Assurance outputs. Perform other duties as assigned by the Maintenance Supervisor through the Lead Mechanic. Position Specifics Qualifications Required Current FAA Airframe and Powerplant certification. High school diploma or equivalent. Valid, state-issued Driver's License. Capable of using respirators and other personal protective equipment including eye and hearing protection. Must possess or have ability to obtain a U.S. Passport or equivalent within 90 days of starting position. Must be able to speak, read, and write in English. Must be able to demonstrate authorization to work in the U.S. Preferred Previous experience with CRJs Additional Information Work Environment: This job operates inside a climate controlled building. This role routinely uses standard office equipment such as computers, telephones, photocopiers, facsimile machines and filing cabinets. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk or hear. This is largely a sedentary role; however, the employee is frequently required to stand; walk; climb up and down stairs; lift weight up to 25 lbs; use hands to handle or feel; and reach with hands and arms. Security Clearance: All employees are required to pass the fingerprint-based criminal history records check (CHRC) per 49CFR1542.209. AAP/EEO Statement: PSA Airlines is an equal opportunity employer; qualified applicants are considered for and treated during employment without regard to race, color, creed, religion, sex (including pregnancy, gender identity and sexual orientation), national origin, citizenship status, age, disability, genetic information, protected veteran status or any other characteristic protected by law. Other Duties: Please note this job description is not designated to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

The Aircraft Maintenance Technician II applies comprehensive knowledge and expertise to perform maintenance, repairs and logistical coordination of moderate to expert level of complexity for fixed and rotor wing aircraft. This position works closely with other aviation maintenance staff and leadership to perform duties in accordance with Intermountain policies and procedures, Federal Aviation Administration (FAA) regulations and manufacturer recommendations. **Essential Functions** + Performs maintenance of an intermediate complexity on rotor and/or fixed wing aircraft systems and components at home base and satellite locations. + Proficient in effective and efficient troubleshooting and repair techniques to complete rotor and/or fixed wing aircraft repairs. + Applies comprehensive knowledge of complex regulatory requirements pertaining to rotor and/or fixed wing aircraft maintenance. + Works autonomously, with little supervision in a fast-paced work environment in a timely manner + Schedules, coordinates, and completes scheduled maintenance and inspections in a timely manner. May be required to complete RII inspections. + Documents, maintains, and completes aircraft records in accordance with FAA and Intermountain requirements. + Tracks aircraft inspection, component due times, and completion of tasks in computer database. + Maintains company-owned special tools and equipment in good working order. Ensures calibration requirements are met. + Assists as requested in the transport of equipment and supplies, including, but not limited to medical equipment. + Maintains up-to-date knowledge of trends and new developments in the aviation field. + Coordinates with Maintenance Control for scheduled and unscheduled events. **Skills** + Aircraft Maintenance / Repair + Technical Interpretation of manuals and schematics. + Intermediate computer proficiency + Troubleshooting + Detail oriented + Analytical + Decision making + Multitasking + Communication **Minimum Qualifications** + Must hold a current FAA Airframe and Power Plant certificate + Demonstrated experience working as an airframe maintenance technician, lead technician or aircraft maintenance supervisor **Preferred Qualifications** + Minimum of 3 years working as an aircraft maintenance technician, lead technician or aircraft maintenance supervisor + Factory engine and airframe training in light/ medium helicopters, turboprop fixed wing, transport category jet aircraft + Bachelor's degree in aviation related field. **Schedule** + 8x6 + Must be able to lift items weighing up to 25 pounds. + Ongoing need for employee to see and read information, labels, monitors, identify equipment and supplies, and be able to assess customer needs. + Frequent interactions with customers that require employee to communicate as well as understand spoken information, alarms, needs, and issues quickly and accurately. + Manual dexterity of hands and fingers to manipulate complex and delicate equipment with precision and accuracy. This includes frequent computer, phone, and cable set-up and use. + Expected to lift and utilize full range of movement to transport, pull, and push equipment. Will also work on hands and knees and bend to set-up, troubleshoot, lift, and carry supplies and equipment. Typically includes items of varying weights, up to and including heavy items. + For roles requiring driving: Expected to drive a vehicle which requires sitting, seeing and reading signs, traffic signals, and other vehicles. #medtransport **Location:** Hickory Air Base **Work City:** Hickory **Work State:** North Carolina **Scheduled Weekly Hours:** 42 The hourly range for this position is listed below. Actual hourly rate dependent upon experience. $37.25 - $56.68 We care about your well-being - mind, body, and spirit - which is why we provide our caregivers a generous benefits package that covers a wide range of programs to foster a sustainable culture of wellness that encompasses living healthy, happy, secure, connected, and engaged. Learn more about our comprehensive benefits package here (***************************************************** . Intermountain Health is an equal opportunity employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, age, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. At Intermountain Health, we use the artificial intelligence ("AI") platform, HiredScore to improve your job application experience. HiredScore helps match your skills and experiences to the best jobs for you. While HiredScore assists in reviewing applications, all final decisions are made by Intermountain personnel to ensure fairness. We protect your privacy and follow strict data protection rules. Your information is safe and used only for recruitment. Thank you for considering a career with us and experiencing our AI-enhanced recruitment process. All positions subject to close without notice.