Assembler jobs in Gresham, OR - 69 jobs

The Production Assembler I performs a range of routine mechanical and/or electromechanical assembly operations, under well-defined instructions and in accordance with company policy and safety procedures. MUST HAVE SOLDERING EXPERIENCE. Job Core Responsibilities • Performs a range of routine mechanical and/or electromechanical assembly of small parts or components in accordance with company instructions and procedures • Reviews shop traveler route card, or uncomplicated schematic drawings to confirm correct sequence of operation • Position very small parts such as ceramic board, crystals, gages, fine pins, fire wire, solder particles and epoxy under binocular microscope using tweezers or positioning fixtures • Adjusts, bends, aligns and solders fine wires to resistors and base parts• Bonds or seals parts or assemblies with epoxies using direct heating elements or ovens and performs a variety of in-process testing • Demonstrates all safety policies and procedures • Other responsibilities as assigned• Regular, consistent and punctual attendance is required. May need to work nights and weekends, variable schedule(s) and additional hours as necessary Job SpecificationsEducation: A Secondary Certificate/High School Diploma or equivalent combination of relevant education and work experience that will allow successful performance of job expectations is preferred. Certifications: Vocational training, apprenticeships or the equivalent experience in related field Years Experience: 0-2 years of relevant experience Skills: • Good mechanical aptitude• Able to operate a variety of hand tools and light machinery • Capable of performing basic mathematics• Ability to read and interpret company documents, such as safety rules, operating/manufacturing instructions, policies and procedure • Good manual dexterity required to work with small parts• Able to problem-solve using existing procedures to perform straightforward tasks• Effective oral, written and interpersonal skills

Russell Tobin's client, an American manufacturing company, is hiring an Assembler in Tualatin, OR Apply Now! Employment Type: Contract Duration: 24+ months with possible extension or conversion Pay range: $22/hr - $25.50/hr Schedules: Front End Days (Sunday- Wednesday 5am-3:30 pm) Back End Days (Wednesday - Saturday 5am-3:30pm) Front End Nights (Sunday - Wednesday 5pm-3:30am) Back End Nights (Wednesday - Saturday 5pm-3:30am) Job Overview: General Position Summary: Navigate computer-based work instructions to install parts and hardware using hand tools and fixtures as required, working on wafer fabrication equipment within a Lean manufacturing clean-room environment. Responsibilities: Use hand tools, torque wrenches, equipment, and fixtures to assemble wafer fabrication equipment. Read and follow detailed work instructions and schematics. Collaborate within teams to maintain workflow and meet production schedules. Adapt to changing priorities, including rework requirements and pilot build projects. Verify correct parts delivery and visually inspect components before installation. Support audits through visual inspection and checklist verification. Close assigned tasks by confirming completion, verifying system steps, and providing a description of work performed. Install parts and hardware per digital instructions, using appropriate tools and fixtures, and confirm system completion. Consistently demonstrate core values aligned with the company culture. Safety Protocol: Complete all required safety training. Follow safe work practices, including proper lifting techniques (up to 35 lbs.), ergonomic use, and stretching. Adhere to personal and product safety guidelines: wear appropriate PPE, follow clean-room procedures, comply with Lockout Tagout policies, and use lifting aids (hoists, cranes, lifting tools). Perform routine safety inspections and document, correct, or escalate hazards. Promote a safe work environment by addressing unsafe practices and escalating unresolved issues. Communication: Demonstrate effective written and verbal communication skills in English. Provide timely information to supervisors and co-workers via phone, email, or in person. Actively engage in meetings and training. Identify and communicate production issues verbally and in writing. Suggest continuous improvements to appropriate teams. Share system status updates during shift transitions. Physical Requirements Note: Physical requirements may vary by site and product line. Ability to work 12-plus hour shifts in a fast-paced setting, including: Lift and install parts up to 35 pounds manually. Perform tasks at a working height of 22” from the ground. Frequently kneel, crouch, and squat. Operate manual tools (wrenches, cutters, etc.). Constantly reach into machinery. Comfortably climb a 10-step ladder. Push/pull assembly dollies with ~40 lbs. of force. Navigate diagnostic software on a computer. Distinguish colors for wire identification. Maintain a clean and organized workspace. Adapt to changing priorities, including overtime and rework. Management may assign or reassign duties as needed. Required Skills and Abilities: Operate hand tools: calipers, circuit testers, wrenches, hoists, ohm meters, screwdrivers, torque wrenches, ladders/platforms, and snipping tools/cutters. Understanding of continuous improvement principles. Strong attention to detail. Flexible and adaptable to change. Proactive and takes initiative. Proficient with computer-based data systems and applications. Able to navigate Microsoft Office software (Excel, Word, Outlook, Teams). Benefits that Russell Tobin offers: Russell Tobin offers eligible employee's comprehensive healthcare coverage (medical, dental, and vision plans), supplemental coverage (accident insurance, critical illness insurance and hospital indemnity), a 401(k)-retirement savings, life & disability insurance, an employee assistance program, identity theft protection, legal support, auto and home insurance, pet insurance, and employee discounts with some preferred vendors.

Assembly Mechanic(Direct Placement for Client) Sigma Design has collaborated with a local industrial company seeking an experienced Assembly Mechanic to join their facility in Vancouver, WA. This company works on projects for the Aerospace, Defense, Energy and Infrastructure industries. What Is Offered: Multiple options for medical, dental and vision including some with HSA and FSA options, life and disability insurance, EAP, 401K PTO and 10 paid holidays Pay: DOE; Entry: $31.39/hr | Mid-level: $34.30 | Senior: $39.22/hr Shift: Four 10's; Monday - Thursday, 5:00am-3:30pm. Career growth - Growing department. Lead positions potentially available in future for the right candidate. Primary Function: The Assembly Mechanic is responsible for installation of integrated system components including engines, drives, HVAC systems, Fuel systems, Hydraulic systems, Fire suppression systems, and many others. Other responsibilities include taking welded parts and bolting them together, using cranes and forklifts, etc. Very fast and driven job. Essential Job Functions - Responsibilities: Assemble and install integrated mechanical systems including engines, driveshafts, HVAC units, and piping systems Follow mechanical drawings and part layouts to complete builds Use hand tools (screwdrivers, wrenches, etc.) and power tools provided on-site Work independently on tasks ~60% of the time, with teamwork during key install phases Operate in environments that include CNC machines and lathes Safely lift and position components with cranes and rigging as needed Maintain a clean, organized work area and follow all PPE and safety requirements Adhere to strict attendance and safety policies Communicate effectively with team members to complete assemblies and resolve issues Apply knowledge of fasteners, mechanical fitment, and assembly best practices Follow Business Technology policies to protect sensitive data and reduce information security occurrences. Education and Experience: (Knowledge, Skills, & Abilities) Desirable backgrounds include mechanics and millwrights with experience in marine repair, maintenance, or new construction applications or in manufacturing, maintenance, or repair industries such as industrial machinery, automotive, aerospace, farm equipment, or other industries requiring high degrees of mechanical aptitude and competence in integrated systems assembly. Must have own set of tools (Basic hand tools. Large power tools provided by company.) Hydraulics and piping experience is a plus Familiarity with machining is a plus (CNC machines or lathes) Ability to interpret engineering drawings Capable of carefully following engineering drawings and procedures to perform equipment installations Possess a strong mechanical aptitude Min. five to seven Years' experience in any of the above summary. Or apprentice program. High school diploma, GED or equivalent required. Must be in good standing with or willing to join an affiliated labor union. Compliance Background - Pass a post-offer background verification. Background and drug screen - pass a post-offer background verification and drug screen. Work Environment Standard machine shop environment with various types of machinery. Appropriate safety garments (PPE) must be worn. Must be able to stand and work as long as 12 hours in different positions. Must be able to lift up to 60 pounds unassisted. SigmaDesign is an Equal Opportunity Employer

Our Culture DZYNE Technologies is leading the future of autonomous defense. Based in Irvine, California, we develop and manufacture advanced airborne and ground-based defense solutions deployed in over 50 countries. Backed by U.S. Government Programs of Record, our technologies are field-proven, scalable, and production-ready. We're growing fast and looking for innovators ready to make an impact. At DZYNE, you'll join a culture built on collaboration, integrity, and purpose. We celebrate wins, value diverse perspectives, and support every team member's success. Ready to do work that matters? Join us. Position: Production Assembler/Technician Location: Portland, OR Position Description: The person in this role will support the manufacturing, production, and service of products. This includes the on-time assembly, testing, quality, packaging, and shipping of US and international sales orders. This position also has duties associated with the receiving of both inventory and non-inventory materials and supply items, inventory management and accuracy, processing WO's, and conducting transactions in our ERP system. You will produce new units as well as conduct repairs. Repair activities include: evaluating, estimating, and performing repairs, modification or overhaul of customer returned units to manufacturing specifications. Required Skills: * Experience with shipping and receiving, and inventory management * Understanding of manufacturing processes * Ability to navigate ERP systems Preferred Skills/Qualifications: * 5+ years' experience working in an electro-mechanical manufacturing environment * Previous experience working in an ITAR/Export Controlled environment. Education: Associate's degree, or equivalent combination of education and experience. Travel: Limited Working Conditions: The diversity of work conditions may range from an environment where there is little or no physical discomfort, such as a general office environment, to warehouse and other facilities. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. * Must have the ability to stoop, stand, climb, occasionally lift a minimum of 40 lbs. * Involves movement between departments, floors, and worksites to facilitate work * May be performing physical activities including but not limited to climbing in and out of equipment, crawling, and working outdoors Other Requirements: (if a clearance level is not required) It is an essential requirement for the person in this role to have a legal right to work in the United States. Salary: $25.50 - $40.00 per hour Salary depends on relevant work experience, education, training, essential skills, and/or other factors such as specialized or high-demand professions. In addition to the annual salary, the position will be eligible for an annual bonus. The pay range for this job level is a general guideline only and not a guarantee of salary or annual bonus. Benefits: Our benefits are DZYNE'ed for your overall health and financial wellness. DZYNE provides comprehensive medical, dental, and vision plans, employee life and accidental death, and disability. DZYNE Technologies is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, sex, national origin, disability, or protected veteran status. In addition to federal law requirements, DZYNE Technologies complies with applicable state and local laws governing nondiscrimination in employment in every location in which our company has facilities. This policy applies to all terms and conditions of employment. #LI-ONSITE Pay Range: $25.52 - $40.00 per hour

Leader in security and fire safety is searching for a qualified and OHIO CERTIFIED fire alarm inspector to perform all job responsibilities effectively. North America's leading manufacturer of custom heating, ventilation, and air conditioning (HVAC) equipment in needs Assemblers to join their team! Position Overview: Assembler will prepares air handler units for assembly in working shop floor. Candidates will be assisting and being trained from advanced assemblers. Job Description Details: •Cleaning Air Handling Units •Installing filters •Basic assembly duties •May operate a screw gun •Installs wall panels, doors and internal parts •Finish caulking work •Helps install fans and filter racks Qualifications: •Able to work independently and with others •Able to stand for long periods on a concrete floor •Able to lift up to 40lbs •Must have average manual dexterity •Able to climb ladders •Able to read a tape measure •Must speak, read, write English Additional Information ASSIGNMENT LENGTH: 12+month contract with possibility of permanent placement

North America's leading manufacturer of custom heating, ventilation, and air conditioning (HVAC) equipment in needs Assemblers to join their team! Assembler will prepares air handler units for assembly in working shop floor. Candidates will be assisting and being trained from advanced assemblers. Job Description Details: •Cleaning Air Handling Units •Installing filters •Basic assembly duties •May operate a screw gun •Installs wall panels, doors and internal parts •Finish caulking work •Helps install fans and filter racks Qualifications: •Able to work independently and with others •Able to stand for long periods on a concrete floor •Able to lift up to 40lbs •Must have average manual dexterity •Able to climb ladders •Able to read a tape measure •Must speak, read, write English Additional Information ASSIGNMENT LENGTH: 12+month contract with possibility of permanent placement

Assembler Interested candidates should send an updated resume to [email protected] is onsite Duration: anticipated yearlong contract Navigate computer-based work instructions to install parts and hardware using hand tools and fixtures as needed on wafer fabrication equipment (WFE) in a Lean manufacturing clean-room environment. Responsibilities * Use hand tools, torque wrenches, equipment, and fixtures to assemble WFE. * Read and navigate work instructions and schematics. * Work collaboratively in teams to maintain workflow and production schedules. * Provide flexibility for changing priorities, including rework and pilot build projects. * Verify correct parts delivery and perform visual inspection of components prior to installation. * Assist with audits through visual inspection and checklist verification. * Close assigned tasks by: * Verifying work completion. * Confirming Cell Fusion was completed. * Signing off and providing a description of work performed. * Install parts and hardware correctly by following Cell Fusion instructions and using tools/fixtures as needed. * Consistently exhibit behaviors aligned with Lam's core values. Safety Protocol * Complete all required safety training. * Follow safe work practices: * Lift no more than 35 pounds. * Use ergonomic pads and stretch as needed. * Adhere to personal and product safety guidelines: * Utilize appropriate PPE. * Follow clean-room procedures. * Comply with Lockout Tagout (LOTO & ZEST) policies. * Use fixtures (hoists, cranes, lifting tools) for assembly. * Perform Risk Management By Walking Around (RMBWA): * Document, correct, and/or escalate safety hazards. * Support a safe work environment by: * Responding quickly to unsafe practices. * Escalating unresolved issues (e.g., incorrect hoist use, poor tool placement, PPE misuse). Communication * Demonstrate effective written and verbal communication skills in English. * Respond promptly to supervisors and co-workers via phone, email, or in person. * Actively participate in meetings and training. * Identify and communicate production issues clearly. * Suggest continuous improvements verbally or in writing. * Communicate system status during shift pass-down. Physical Requirements * Work 12+ hour shifts in a fast-paced, time-sensitive environment. * Lift and install parts up to 35 pounds manually. * Perform tasks at a working height of 22" from the ground. * Frequently kneel, crouch, and squat. * Use manual tools (e.g., box wrench, cable tie cutters). * Reach into machines constantly. Apex Systems is a world-class IT services company that serves thousands of clients across the globe. When you join Apex, you become part of a team that values innovation, collaboration, and continuous learning. We offer quality career resources, training, certifications, development opportunities, and a comprehensive benefits package. Our commitment to excellence is reflected in many awards, including ClearlyRated's Best of Staffing in Talent Satisfaction in the United States and Great Place to Work in the United Kingdom and Mexico. Apex uses a virtual recruiter as part of the application process. Click here for more details. Apex Benefits Overview: Apex offers a range of supplemental benefits, including medical, dental, vision, life, disability, and other insurance plans that offer an optional layer of financial protection. We offer an ESPP (employee stock purchase program) and a 401K program which allows you to contribute typically within 30 days of starting, with a company match after 12 months of tenure. Apex also offers a HSA (Health Savings Account on the HDHP plan), a SupportLinc Employee Assistance Program (EAP) with up to 8 free counseling sessions, a corporate discount savings program and other discounts. In terms of professional development, Apex hosts an on-demand training program, provides access to certification prep and a library of technical and leadership courses/books/seminars once you have 6+ months of tenure, and certification discounts and other perks to associations that include CompTIA and IIBA. Apex has a dedicated customer service team for our Consultants that can address questions around benefits and other resources, as well as a certified Career Coach. You can access a full list of our benefits, programs, support teams and resources within our 'Welcome Packet' as well, which an Apex team member can provide. Employee Type: Contract Location: Tualatin, OR, US Job Type: Engineering and Technicians Date Posted: December 8, 2025 Similar Jobs * Controls Engineer 3 * Product Designer 3 * Product Designer 3 * Developer Middleware Integration 3 * HR Support Representative 3

4/10 work schedule Monday - Thursday Temp to hire 1st shift: 6am - 4:30pm Pay rate: $20 - $23/hr The Electrical Assembler II, under moderate guidance, will perform processes to manufacture a finished product, using small hand tools and soldering skills per manufacturing instructions in the cell, in accordance with company policy and safety procedures. May assist in training Assembler I associates. o Performs a variety of routine mechanical and/or electromechanical assembly operations in accordance with company instructions and procedures o Conducts inspections of own and /or other associates work to insure correctness in accordance with company and /or customer drawing o Prepares lead wires, o Performs advanced test functions. o Shapes, connects and installs coils, solder, braze and fuse connections. o Performs advanced installation, o Performs marking and cleaning process, o May solder and assemble, electro-mechanical or mechanical assemblies/subassemblies using blueprints, wiring diagrams and manufacturing instructions to conform to quality specifications o May solder connections and electronic components to circuit boards o May use coating equipment. o May read calipers. o May use microscope. o May use small hand and electric tools. o May clean and mark surfaces to indicate measurements. o Ability to be trained to use simple machines such as lathes, drill press and balance machines. o Actively demonstrates all safety policies and procedures o Soldering o Inspection o Mechanical Assembly o Bonding or Gluing o Basic Testing o Other specialized processes as required by manufacturing outlines o Moderate paperwork requirements such as M.O. preparation. o Test reports, filling out and maintaining one or more required report o Performs other assigned duties as required. o This job description identifies the essential functions of the job, but does not necessarily include all the tasks the employee may be asked to perform. Education: A Secondary Certificate/High School Diploma or equivalent certificate (GED) is required. Years' Experience: 0 - 2 years of relevant experience Regular, consistent, and punctual attendance is required. Variable schedule(s) and additional hours may be required as necessary.

Join Our Team as a Food Production Assembler Day Shift - Urgently Hiring in Silverton! Job Title: Food Production Assembler Pay: $16.25/hour Hours: Day Shift: Mon-Fri (with potential weekend work during busy seasons - GREAT OPPORTUNITY FOR OVERTIME!) Shifts available: 5:00 AM - 4:00 PM, 6:30 AM - 5:00 PM, 7:00 AM - 5:00 PM Start Date: ASAP Looking for a rewarding role in a growing industry? Join a reputable food manufacturer as a Food Production Assembler in Silverton, Oregon, and make a difference every day. As a Food Production Assembler, you'll play a critical role in the production process, contributing to the creation of wholesome, delicious products. What You'll Do: As a Food Production Assembler, you will be responsible for: Preparing and pressing dough into pie tins or shells. Filling pies and cobblers with various ingredients. Assisting with mixing, stocking, dumping, and packaging tasks. Scooping flour, sugar, and other powdered ingredients into containers ranging from 1 quart to 50 gallons. Placing dessert products into retail packaging containers and applying labels. Stacking trays and maintaining cleanliness and organization in the warehouse at all times. What You'll Bring: The ideal candidate for this role will have: The ability to read, write, and speak in English or Spanish. A willingness to perform repetitive tasks and lift 30-50 lbs (team lift assistance available). Strong attention to detail and a commitment to quality. Previous experience in food production or a similar environment is preferred. Why Join Us in Silverton? Enjoy flexible hours with opportunities for overtime. Be part of a supportive team culture in a modern workplace. Benefit from competitive pay and great benefits, including affordable health and prescription coverage with no waiting period. Experience a rewarding role with the chance to gain valuable skills and advance your career in the food production industry. Additional benefits will be offered once you are hired permanently, including a 401k retirement plan. Location & Schedule: This position is on-site in Silverton, OR, and offers day shift hours. Ready to Take the Next Step? If you're ready to start a fulfilling career as a Food Production Assembler in Silverton, apply today or contact our recruiting team to learn more. Don't wait, we're hiring now! #STSAL

Assembly Associate II Reports To: EPS Supervisor FLSA Status: Non-Exempt Can you make the AGC Difference? AGC Heat Transfer, Inc. is looking for a dynamic manufacturing Assembly Associate to support the company's mission to provide reliable, innovative plate heat exchanger products, solutions and services that surpass expectations of food manufacturers. Brief Company Description AGC Heat Transfer, Inc., a wholly owned subsidiary of Alfa Laval, AB, is the leading OEM of sanitary plate heat exchangers in North America, manufacturing plate heat exchangers specifically designed for sanitary applications. AGC offers complete heat exchangers, services as well as upgrades to plate packs, gaskets and spares that fit multiple brands. In addition, AGC offers Field Leak Testing and inspections of plate heat exchangers that meet the 3-A sanitary standard. AGC Heat Transfer consists of three manufacturing/service facilities (Bristow, VA, Fairview, OR & Pleasant Prairie, WI) with about 110 employees (70 OR / 20 VA / 20 other locations). Currently, most of the sales are in the US & Canada. AGC Heat Transfer has a strong engineering culture with a heavy emphasis on customer service and technical/consultative sales. Job Description As an Assembly Associate II, the employee will perform a wide range of tasks. Some of the responsibilities include, but are not limited to: Position Responsibilities Material handling (using overhead crane, hoists, forklift, pallet jack and electric pallet jack) Hydraulic press operation Operate industrial oven and leak testing equipment. Work safely with tools and equipment to complete daily tasks. Complete all assigned tasks in a timely and efficient manner. Keep work areas clean by sweeping or mopping where needed. Perform visual quality inspections of new and customer's plates. Comprehension of basic written instructions. Apply rubber gaskets to new and customer's plates. Accurately counting and recording parts and equipment Prepare plate packs/gaskets for shipping. Actively participate in continuous safety and production improvement efforts. Other duties as assigned. Key Competencies High Integrity with a commitment to honesty, trust and transparency. Displays Care embracing the highest standards to ensure resource efficiency for the well-being of team members and responsibility to the environment. Innovative and curious promoting diversity of thought while understanding the needs of the customer leveraging cutting-edge technology utilizing state-of-the-art processes. Committed to Excellence through perseverance, GRIT and a focus on continuous improvement consistently delivering quality equipment, parts and service of unmatched value. Execution while focusing on quality, safety and Teamwork delivering results motivated by a diverse and inclusive culture based on accountability, customer/employee satisfaction, creative solutions, and constant communication. Goal oriented driving to positive results. Skills & Qualifications 2+ years previous experience in a manufacturing environment. Experience with Hydraulic Press Operation, Machining or Tooling preferred. High School Diploma or GED. Trade or other secondary schooling a plus. Troubleshooting and multitasking skills Basic addition and subtraction/Reading and writing skills. Ability to follow directions and focus on completing tasks. Must be willing to work on a wide range of tasks. Wear all appropriate PPE. Ability to follow safety rules and the 5s principles of a work environment. Ability to do repetitive work including walking, standing, and lifting for extended periods of time. Capable of lifting 50 lbs. Job Type Full Time, Non-Exempt (Hourly) Wage $21.00 - $24.00 per hour Benefits Health Insurance with Health Savings Account (if eligible) Dental/Vision Insurance Life/Disability Insurance 401(k) with employer match Paid Vacation/Sick Time Paid Holidays Employee Assistance Program Wellness Program EQUAL OPPORTUNITY EMPLOYER

Job Description Assembler Department: Production Reports to: Area Lead Wage Range: $18-$25 Principal Accountabilities: Become IPC-A-610 and J-STD-001 certified and retain those certifications Meet production requirements: Ability to read, understand, and navigate in Fusion/Factory Logix documentation, Pass the Component Identification quiz, Depanel per work instructions, and learn to tape off small components with masking tape for conformal coat process. Perform prepping, stuffing Assist the Shipping Coordinator as needed Ensure that all products are tagged, bagged, packaged, and labeled properly and in accordance with customer and/or shipper's specifications Responsibility is to ship per work instructions and customer requirements Perform all computer transactions accurately and quickly Ability to navigate several software applications Physical Requirements:Ability to sit and/or stand for extended periods of time, as required by job tasks Visual acuity sufficient to perform detailed work, including the ability to inspect work under a microscope when necessary Must be able to pass a vision exam with a minimum visual acuity of 20/25 in at least one eye, with or without corrective lenses Must be able to pass a color vision test to accurately distinguish color-coded components or materials Demonstrated ability to prioritize and perform multiple tasks effectively Paint/taping experience is a plus Minimum Qualifications: Must be a U.S. person as defined in ITAR, 22 CFR 120.15 (U.S. Citizenship or Legal Permanent Resident) and defined by 8 U.S.C. 1101(a) (20) Good verbal and written skills Basic computer skills Preferred Qualifications: IPC-A-610 and J-STD-001 certified 2 years production environment experience As part of our commitment to a safe and trustworthy workplace, Impact ES Vancouver conducts background checks on all final candidates. These checks may include verification of employment history, education, criminal records, and other relevant information, depending on the position. All background checks will be conducted in compliance with applicable federal, state, and local laws, including the Fair Credit Reporting Act (FCRA). A candidate's background will not be used as the sole basis for disqualification unless it is determined to be directly related to the responsibilities of the position.

The Production Home Assembler follows work orders and instructions in order to accurately and efficiently prepare and assemble building components and homes in a factory assembly line environment. Essential Duties and responsibilities: Operate various hand tools, power tools and equipment used to complete carpentry duties including: Circular Saw Table Saw Router Pneumatic Nail Gun (roofing, framing and finish work) Drills And other tools needed for measuring, cutting, fastening, and drilling Frame, layout and build floors Prepare, layout and build walls Layout, run and install electrical lines, switches, receptacles and panels/breaker boxes Install and prepare dry for finish tape, mud and texture Complete roof construction, decking, flashing and shingling Cabinet and or finish carpentry and trim, build and installation Installation of siding, windows and doors Painting of interior and exterior of homes Cooperate and promote a team concept with all other company employees Adhere to all rules and regulations, at all times Meet or exceed company safety standards Perform other tasks as assigned by management Minimum Qualifications: Must be at least 18 years of age Must be legally authorized to work in the United States Be able to read, write, and speak English High School diploma, preferred Knowledge, Skills and Abilities: Ability to read a tape measure Possess basic construction knowledge and comfortable using basic tools Excellent attention to detail Ability to read blueprints, a plus Ability to work in a fast-paced environment and multi-task Ability to trouble shoot and problem solve in a high-volume Versatility and willingness to transfer into various departments when necessary You must be able to communicate efficiently and clearly with other Team Members Working conditions: Continuous exposure to heat, cold, noise, and working outdoors. Must wear protective equipment while at the location Physical requirements: Requires walking, sitting, lifting, pushing, pulling and climbing to a significant degree Heavy Work-Exerting up to 50 pounds of force occasionally, and/or up to 20 pounds or force frequently, and/or up to 10 pounds of force constantly to move objects While performing the duties of this job, the employee is regularly required to talk and hear, in order to communicate to employees as well as function safely around construction equipment Disclaimer: “This is intended to provide general information about the position. It is not an employment contract. As with all positions, the responsibilities and duties of this position may change. The company, in its discretion, may alter this job description at any time with or without notice.” EEO/AA Statement: Cavco Industries Inc., and all of its Subsidiaries are an EEO/AA (equal opportunity/affirmative action) institution and does not discriminate on the basis of sex, age, race, color, religion, physical or mental disability, creed, national origin, veteran status, sexual orientation, genetic information, gender identity, or gender expression in the programs or activities which it operates.

Who We Are National Assemblers, Inc is family-owned and the largest retail assembly company in the world, with over 10 Million products assembled for our customers last year. We are the trusted provider to the world's largest brands like Walmart, Amazon, Wayfair, Bass Pro Shop, and most importantly, to individual customers who trust us in their homes. We were awarded “Assembly Company of the Year” for 2022 all due to our hardworking technicians who have pride in all they do! We are also the fastest growing, with over 100 new management roles created and filled last year! If you have the will and the skill, we have the opportunities for you! Who You Are You love working with your hands to build products. You're the one all of your family and friends call to assemble their new treadmill or desk or mount their new TV. You have an entrepreneurial spirit and like the benefits and backing of a W2 organization. You enjoy independence and are self-motivated. You are a great communicator and enjoy interacting with customers. Customer satisfaction and high quality is your top goal when working. You're a problem-solver and proactively seek solutions. You are reliable and have a proven attendance record. You're not afraid of hard work and enjoy a good challenge. If this sounds like you, we would love you to join our NAI team! Key Responsibilities Bed Warranty Repairs - Troubleshoot and fix mechanical or structural issues on various bed types Furniture Assembly - Assemble bed frames, desks, chairs, shelving units, and more Fixture Mounting & Installation - Install wall fixtures such as painting, mirrors, and other home fixtures securely TV Mounting & Installation - Mount, install, and setup TVs, ensuring secure placement and optimal viewing angles Entertainment System Installation & Setup - Install and configure home theater systems, soundbars, and streaming devices Provide top-tier customer service, educating customers on product use and maintenance Maintain accurate records of installations and repairs using company software Follow all safety and quality control procedures to ensure professional results What We're Looking For Experience in installation, assembly, or repair work (preferred but not required) Familiarity with entertainment and security system setup is a plus Mechanical aptitude and ability to use hand/power tools Strong attention to detail and problem-solving skills Excellent customer service and communication abilities Ability to lift and move heavy equipment (50+ lbs) Valid driver's license and clean driving record Benefits: Weekly Pay Medical/Dental/Vision Insurance 401K Paid Certification Program W-2 Employee The Fine Print NAI pays our “in-home” techs competitive earnings per piece being paid for every completed project. Our focus is on efficiency, quality, and safety above all else! Your will and your skill will enable you to determine the pay you desire for yourself. Our dedicated team will give you all the tools and training necessary to unlock your maximum potential. Full and part-time work is available, and jobs and schedules will vary depending on location. You will be a W2 employee (not a subcontractor!), meaning you will be trained, insured, paid appropriately for all hours, including overtime, and eligible for benefits. Start a Career that you Love with National Assemblers, Inc. APPLY NOW to start building your future with us! National Assemblers, Inc is an equal opportunity employer and does not discriminate against otherwise qualified applicants on the basis of race, color, creed, religion, ancestry, age, sex, marital status, national origin, sexual orientation, disability or handicap, veteran status and any state and local protected status.

The Portland factory team at Rejuvenation is responsible for the highest quality craftsmanship in custom lighting and house parts. Overview of the role: Performs a variety of tasks to support the production of Rejuvenation lighting and hardware products. As an Electrical Assembler Technician, you will be assigned to the Assembly area, and work in other functions as needed. Responsibilities Assembles and installs electrical wiring of all lighting fixtures. Safely perform repetitive small assembly operations according to quality specifications to produce a completed light fixture. Perform repetitive hand and bench assembly of varying small sizes using hands, adhesives, fasteners, hand tools, fixtures, and other small machine assists. Tests, calibrates, and fits parts and mechanisms to meet tolerances and product specifications. Duties will include but are not limited to tasks designated as level 1 tasks in the above departments such as: assembling basic light fixtures, sandblasting, hand finishing and other finishing activities required for basic fixtures and finishes, etc. Performs in line quality checks to ensure that established quality standards are being maintained. Collaborates with associates/teams to contribute to the continuous improvement of operational processes, efficient and accurate order completion, and problem resolution. May be assigned to other functional areas based on business need and demand levels. Complies with all safety rules, processes, and standards. Perform other duties as assigned by management. While performing the duties of this job, you will be required to constantly stand, walk, talk and hear. You must be able to occasionally move, push, pull, lift, or carry heavy objects or materials up to 50 pounds. Criteria Prior experience in manufacturing or above functional skills (including lighting assembly and finishing techniques) a plus. Ability to operate hand tools. High school education or equivalent preferred. Ability to read, comprehend, and speak English at a level to effectively utilize and interpret work and safety instructions. Adequate hand dexterity to work with required hand tools - frequent grasping and fine manipulation required. Demonstrates strong listening skills and ability to follow direction. Work Environment Work is performed in a distribution/manufacturing setting. There may be exposure to airborne particles, chemicals, fumes, flammable materials, dirt, grease, and electrical equipment (Personal Protective Equipment provided where required). May work near moving mechanical parts and may be exposed to humid, hot, or cold conditions as well as exposure to moderate noise levels. We believe in People First We firmly believe that working in a culture focused on diversity, equity, and inclusion spurs innovation, creates healthy and high-performing teams, and delivers superior customer experiences. Our DEI initiatives prompt associate participation and engagement, aligning with our core vision to reflect the communities where we do business and put people first. Benefits Just for You Depending on your position and your location, here are a few highlights of what you might be eligible for: A generous discount on all Williams-Sonoma, Inc. brands A 401(k) plan and other investment opportunities Paid vacations and Personal time off Health benefits, dental and vision insurance, including same-sex domestic partner benefits Tax-free commuter benefits A wellness program that supports your physical, financial and emotional health

Job Description About the Role The Board Assembly Manufacturing Associate III is a skilled manufacturing role responsible for advanced printed circuit board (PCB) assembly, inspection, and repair. This position will function as a re-work specialist for PCBs that require repair or modification, playing a critical role in ensuring product quality and compliance with IPC, JSTD, aerospace, and customer-specific standards. Key Responsibilities Perform advanced PCB assembly and re-work, including repair and modification of boards requiring corrective action Use soldering equipment such as hot iron and hot plate for SMT and through-hole soldering, including leaded and lead-free processes Execute advanced board re-work, including ITAR-regulated, JSTD, and aerospace-standard assemblies Follow work orders, production drawings, travelers, control plans, ECNs, and deviations Inspect PCBs for component placement, polarity, orientation, solder quality, cleanliness, and defects Identify defects, determine root cause, and document quality findings and corrective actions Perform continuity testing using ohm meters and inspection tools Use microscopes and magnification equipment for precision assembly and inspection Conduct mechanical assembly using hand tools and calipers Operate PCB baking equipment and provide backup support for wash machine operations Ensure compliance with IPC-A-610, IPC-620, JSTD, and internal quality standards Record production and quality data using manufacturing tracking systems Support production priorities and assist with training and guidance of other associates as needed Qualifications High school diploma or GED required Minimum of three years of related manufacturing experience, or equivalent combination of education and experience IPC certification (IPC-A-610 and/or IPC-620) required; candidates not currently certified must be willing to obtain certification, which will be paid for by the company Demonstrated experience performing advanced PCB re-work and repair Strong knowledge of SMT and through-hole soldering techniques Ability to read and interpret technical documentation and drawings Basic computer skills and experience using ERP or production tracking systems Strong attention to detail, quality, and safety Ability to work effectively in a team-based manufacturing environment Physical Requirements Ability to sit at a workbench for up to eight hours per day Frequent use of hands and fingers for soldering, crimping, and handling small components Occasional standing and walking Ability to lift and/or move up to 25 pounds occasionally Vision requirements include close vision, color vision, depth perception, and ability to adjust focus Ability to work safely around moving mechanical parts and electrical components What We Offer Comprehensive training program - no experience necessary Opportunities for career advancement Supportive team environment focused on collaboration Benefits include medical, dental, vision, FSA, HSA, Life, LTD, 401(k) & matching, paid time off, tuition reimbursement Employee will be eligible for the profit share bonus or Vexos performance bonus How to Apply Please send your resume to . Include the job title in the subject line and your desired compensation range in the body of the email. Company DescriptionVEXOS is a rapidly growing and successful Electronics Manufacturing Services (EMS) provider that delivers innovative solutions to High Technology organizations worldwide. From our locations in North America, Vietnam, Hong Kong, and China, we support clients globally with quality manufacturing services. At Vexos Vancouver, we prioritize not only business excellence but also our people and community. Our team is dedicated to innovation, problem-solving, and building meaningful relationships with both clients and colleagues.Company DescriptionVEXOS is a rapidly growing and successful Electronics Manufacturing Services (EMS) provider that delivers innovative solutions to High Technology organizations worldwide. From our locations in North America, Vietnam, Hong Kong, and China, we support clients globally with quality manufacturing services. \r \r At Vexos Vancouver, we prioritize not only business excellence but also our people and community. Our team is dedicated to innovation, problem-solving, and building meaningful relationships with both clients and colleagues.

Benefits: 401(k) matching Free food & snacks Health insurance Paid time off At TennMax, we are all about the perfect fit. That's why we invest so much in our people. We offer training and development opportunities, along with a promote-from-within, anyone-can-lead philosophy. We're looking for inspired learners, resourceful problem solvers, curious thinkers, and dedicated professionals who want to learn and grow with us. What you'll do: - You'll work on small parts with tights spaces to trim - You will perform basic quality checks---visually inspect the finished parts using magnifier and various testing tools- You will work with a team to produce a great product- You'll be working full time, Mon-Fri 8:00 - 4:30 with the opportunity for overtime. Who we want:- Experienced working in a manufacturing environment- Detail-oriented with limited supervision- Ability to lift up to 20 lbs. and sit for extended periods of time What we offer: - Healthcare and Benefits Package- PTO- Matching 401K- Profit share program- And more! About UsTennMax is a leader in EMI shielding and thermal management. We work with some of the world's most well-known organizations and provide components to Consumer, Automotive, Instrumentation, Communication, Military and Aerospace industries. TennMax America, located in Vancouver, WA, is the US division of the global organization. The best part about being a part of a multinational company? We have a family-like team with a global vision. Compensation: $16.66 per hour About UsTennMax America is a leader in EMI shielding and Thermal Management. We work with some of the world's most well-known organizations and provide them with complete solutions utilizing our advanced knowledge in conductive silicones, gasketing, plastic metallization, heat pipes and sinks, and thermal interface materials.

**No Experience Needed ** ********************************************* Custom Interface, Inc has immediate openings for Electronics Assembly Specialists. Come join our team of dedicated, highly skilled professionals, building and testing innovative products for the aerospace and aviation industry. This is an entry level position starting at $17.00/hour and requires no previous experience. On the job training is provided as well as opportunities of advancement into other roles. Custom Interface offers great employee benefits including a FOUR DAY WORK WEEK, medical, dental, life insurance, and educational assistance. Please visit our website to view details about this opportunity and apply. Summary: The functional role of an Assembly Specialist at Custom Interface, Inc. is to assist the Table Leader in the production of completed assemblies from CII to the specifications outlined in IPC/WHMA-A-620 and in compliance with the QMS documentation set. Essential Functions and Responsibilities: All of the following duties and responsibilities performed by the assembler in the cable/wire harness fabrication process shall adhere to the specifications outlined in IPC/WHMA-A-620 standard. Audit all kits before starting any work process; address discrepancies immediately. Identify needed tools and check out from tooling department. Return when finished. Machine assembly- set up and operate Crimping, Splicing and Wire Cut/Stripping machines. Perform or receive In Process Quality Inspections of work. Maintain records and documentation as required. Comply with the safety policy and procedures. Comply with the employee policies and procedures. Quality of work is defect free and built in accordance to the work instructions. All reports and paperwork are completed on or before due dates. Team members, management, and employees are satisfied with the response, support and professional treatment they receive. Qualifications: Knowledge, Skills and Abilities: Read schematic drawings accurately and interpret critical specifications. Exhibit basic math skills to convert fractions to decimals in both the Metric and U.S. Standard scales. Ability to sufficiently read and write in the English language to accomplish assigned tasks. Ability to follow complex verbal directions. Use hand, pneumatic and electrical power tools to assemble components. Must be able to gain & retain certification in English IPC 620 and IPC 610 as required. Working knowledge of Outlook, Word and Excel computer programs. Physical Requirements: Vision equal to or corrected to 20/20 on a Snellen Eye Chart. Demonstrate ability to differentiate between colors. Work 8 - 10 hours per day in a standing and/or sitting position. Demonstrate eye/hand coordination to satisfactorily manipulate small parts/objects. Lift and carry up to 25 pounds up and down a staircase. ITAR Requirements: Custom Interface, Inc. manufactures defense articles and provides services using technical data that is controlled under International Traffic in Arms Regulations, as set by the U.S. State Department. This position is subject to the International Traffic in Arms Regulations (ITAR) which requires U.S. person status. ITAR defines U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee. Working Conditions: Custom Interface's facility is a manufacturing environment where temperature variations exist from opening doors to the outside environment, smoke particulates from soldering and other manufacturing operations frequently occur and there are occasionally noise levels that require hearing protection. Equal Opportunity: Custom Interface provides equal employment opportunities to all employees and applicants for employment without regard to race, color, ancestry, national origin, gender, sexual orientation, marital status, religion, age, disability, gender identity, results of genetic testing, service in the military or any other status protected by law. Equal employment opportunity applies to all terms and conditions of employment, including hiring, placement, promotion, termination, layoff, recall, transfer, leave of absence, compensation, and training.

Job Title: Production Assembler 2/Electrical Assembler Pay: $20 - $23/hr Schedule: 4/10 work schedule Monday - Thursday, 6am - 4:30pm The Electrical Assembler II, under moderate guidance, will perform processes to manufacture a finished product, using small hand tools and soldering skills per manufacturing instructions in the cell, in accordance with company policy and safety procedures. May assist in training Assembler I associates. Performs a variety of routine mechanical and/or electromechanical assembly operations in accordance with company instructions and procedures Conducts inspections of own and /or other associates work to insure correctness in accordance with company and /or customer drawing Prepares lead wires Performs advanced test functions. Shapes, connects and installs coils, solder, braze and fuse connections. Performs advanced installation, Performs marking and cleaning process May solder and assemble, electro-mechanical or mechanical assemblies/subassemblies using blueprints, wiring diagrams and manufacturing instructions to conform to quality specifications May solder connections and electronic components to circuit boards May use coating equipment. May read calipers. May use microscope. May use small hand and electric tools. May clean and mark surfaces to indicate measurements. Ability to be trained to use simple machines such as lathes, drill press and balance machines. Actively demonstrates all safety policies and procedures Soldering Inspection Mechanical Assembly Bonding or Gluing Basic Testing Other specialized processes as required by manufacturing outlines Moderate paperwork requirements such as M.O. preparation. Test reports, filling out and maintaining one or more required report Performs other assigned duties as required. This job description identifies the essential functions of the job, but does not necessarily include all the tasks the employee may be asked to perform. Education: A Secondary Certificate/High School Diploma or equivalent certificate (GED) is required. Years' Experience: 0 - 2 years of relevant experience Regular, consistent, and punctual attendance is required. Variable schedule(s) and additional hours may be required as necessary. Company DescriptionWe're not just a staffing company - we're a people company. At Amtec, we care about helping you reach your unique career goals. Since 1959, we've changed the lives of thousands of people for the better - people just like you. It's our purpose to help you find meaningful work by matching your character, competence, and culture with an organization that truly values what you have to offer.Company DescriptionWe're not just a staffing company - we're a people company. At Amtec, we care about helping you reach your unique career goals. Since 1959, we've changed the lives of thousands of people for the better - people just like you. It's our purpose to help you find meaningful work by matching your character, competence, and culture with an organization that truly values what you have to offer.

Join Our Team: Food Production Assembler - Urgently Hiring in Silverton! Job Title: Food Production Assembler Pay: $16.25 per hour Hours: Swing Shift: Monday - Friday (with potential weekends during busy seasons for great overtime opportunities!) What You'll Do: As a Food Production Assembler, you will be responsible for: Preparing and pressing dough into pie tins or shells. Filling pies and cobblers with high-quality ingredients. Assisting with mixing, stocking, dumping, and packaging tasks. Scooping flour, sugar, and other powdered ingredients into containers ranging from 1 quart to 50 gallons. Placing dessert products into retail packaging containers and applying labels. Stacking trays to ensure smooth production flow. Maintaining cleanliness and organization in the warehouse at all times. What You'll Bring: The ideal candidate for this role will have: The ability to read, write, and speak in English or Spanish. Strong attention to detail to ensure quality in every product. Previous experience working in a food production or similar environment is preferred. Why Join Us in Silverton? Enjoy flexible hours with potential for overtime during peak seasons. Benefit from a supportive team culture that values your contributions. Take advantage of competitive pay and great benefits once hired permanently, including affordable health and prescription coverage with no waiting period. Contribute to a meaningful cause in the wholesome food industry. Location & Schedule: This position is on-site in Silverton, OR, with shift details from 4:00 PM to 2:00 AM or 5:00 PM to 3:00 AM. Ready to Take the Next Step? If you're ready to start a rewarding career as a Food Production Assembler in Silverton, apply today or contact our recruiting team to learn more. Don't wait, we're hiring now! #STSAL