Assembler jobs in Newburyport, MA

We are currently seeking an experienced Advanced Assembler to support our client's production team. This position involves assembling and disassembling subassemblies and systems by closely following detailed instructions. The ideal candidate will complete mechanical assemblies using a range of mechanical parts and both standard and specialized tools. Candidates should demonstrate proficiency with basic hand and power tools used in mechanical assembly, and possess the fine motor skills needed for precision tasks such as handling small components and tying repeated knots with lacing. The ability to follow process sheets and perform minor repairs is also required. Skills Required: Proficiency with basic hand and power tools Strong fine motor skills Ability to follow detailed mechanical process sheets Capable of performing minor mechanical repairs Experience Required: Minimum of two (2) years of education from a High School or Trade School At least two (2) years of relevant experience in mechanical or system assembly preferred Education Required: Two (2) years of High School or Trade School education Shift Information: 3:30 PM to 2:00 AM Four 10-hour workdays per week Benefits: Health Insurance 401k Pay Range: $25.00 - $30.00 per hour (Depending on experience and qualifications) By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from HEPCO, Inc and its affiliates, and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, gender expression, marital status, national origin, age, veteran status, disability, or any other protected class.

Production Assembler Amphenol Ardent Concepts is a leading designer and manufacturer of high performance multicoax and coaxial assemblies, connectors, and sockets used in the development of next generation semiconductors and electronics systems. Our core technology is the smallest, fastest, and most electrically efficient compression mount connector technology worldwide. As data rate requirements increase and devices and systems shrink, Ardent Concept's products deliver superior signal integrity in a dense footprint that can be reusable across programs to maximize cost savings. No experience necessary. Willing to train crew members who demonstrate excellent hand/eye coordination with microscopic parts, who otherwise qualify. Candidates that have experience with arts and crafts, small model building, jewelry making, or small intricate mechanical devices may have the skills applicable to work with these micro assembly products. This is a full time, first shift position. The hours are Monday through Thursday, 7:00am to 5:30pm. RESPONSIBILITIES: Micro assembly product lines while working through microscope Prepare and assemble materials, build product subassemblies or final assemblies, plate product. Test and inspect products or subassemblies for functionality and quality. Set up and operate production fixtures and tools in accordance with good manufacturing practices and standard operating procedures. Inspect finished products for quality and adherence to engineering prints. Adhere to all applicable regulations, policies, and procedures for health, safety and environmental compliance. Clean production equipment, products, and work areas. Measure and record data associated with products. Other tasks as assigned by supervisor. QUALIFICATIONS: High level of hand/eye coordination with ability to work extended periods on a microscope Ability to perform mathematical calculations Familiarity with engineering drawings is preferred High school diploma or equivalent Physical agility This job operates in a lab/manufacturing setting. While performing the duties of this job, the employee is frequently exposed to fumes and moving mechanical parts. The noise level in the work environment can be loud. Computers and machines are used, and the employee must be coordinated and have the ability to lift and or move up to 25 lbs. Specific vision abilities required by this job include close, distance, color, and peripheral vision. Must have depth perception and ability to adjust focus.

Job Description Founded in 1957, Adcole is recognized as a world leader in the production of industrial metrology equipment. We design and manufacture machines for measuring precision cylindrical and/or rotating components such as EV drive and rotor shafts, camshafts, crankshafts, pump shafts, and robotic reducer shafts. Our customers span a variety of industries with our core base in the automotive, heavy/medium diesel, and industrial machinery markets. Adcole manufactures exclusively in Massachusetts for shipment to customers in the US and around the world. Headquartered in Marlborough Massachusetts, the company has approximately 100 employees in 5 locations worldwide. We have a highly talented and dedicated group of employees that develop and manufacture innovative products for our customers, with most employees having been with the company for over 15 years. These long tenures reflect the positive work environment at Adcole which has led many to stay with the company for their entire careers. Upon hire, all employees receive a generous benefits package, including medical/dental/vision coverage, tuition reimbursement, life/AD&D insurance, short and long-term disability, employee assistance program, 401K retirement plan, paid time off, sick time, and company holidays. Privately held and under new ownership, the company is aggressively investing in training, technology, and product innovation to grow significantly in the coming years. Position Summary Perform a wide variety of mechanical or measurement assembly operations on product components, assemblies or sub-assemblies. Determines and/or follows methods and sequence of operations in performing wiring, component installation, hand soldering, cable assembling, bonding and fitting on assembly units. Make setups and adjustments, holding tolerances to blueprint and test specifications. Reports to: Assembly Supervisor Job Duties Acquires job skills and learns all applicable company policies and procedures. Complete assigned tasks while following manufacturing, schedules, policies and procedures. Normally receives little instruction on daily work. Requires instructions on newly introduced assignments. Assumes responsibility for meeting schedules and quality of work. Act as a champion of the company's Lean and Continuous Improvement programs. Time and attendance are in accordance with company policies, procedures, and work area schedule. Complete work orders on schedule to ensure a constant flow of finished product to support production and customer service levels. Complete a variety of manufacturing tasks as trained and directed by your supervisor including but not limited to bonding, potting, hand soldering (surface mount/thru hole & wire bonding), mechanical and electro-mechanical assembly. Notify manager of all Defective Material Reports (DMR). Ability to escalate situations and conditions that are critical to quality, safety and on-time delivery. Education and Experience High School Diploma or Equivalent. 2+ years of related experience. Experience working in a LEAN manufacturing environment a plus. Experience in surface mount and thru hole pcba soldering required. Soldering certification to IPC 610 or willingness to complete certifications. Demonstrated the ability to perform delicate, high skill, processes on small parts. Experience in an ISO 9001:2015 manufacturing environment preferred. Experience with MRP systems a plus. Job Requirements Have good manual dexterity. Computer skills and literacy. Strong attention to detail. Ability to manage multiple priorities and multiple tasks simultaneously. Strong verbal and written communication skills. Produce quality products in accordance with labor and quality standards. Follow all applicable manufacturing procedures and documentation. Follow work order activities established via production planning. Clean and maintain equipment (including tools and fixtures). Participate in the company's LEAN and Continuous Improvement programs. Maintain work area 5s standards. Capable of adhering to J-STD-001 for soldering and inspection for electrical re-work. Join us at Adcole, where innovation meets dedication, and help us continue to set industry standards in metrology equipment. Apply now to be a part of our dynamic and growing team! Job Posted by ApplicantPro

Wall Industries, a subsidiary of Continental Resources, Inc., is located in Exeter, NH. The company manufactures and markets a full line of DC/DC converters and AC/DC power supplies with an emphasis on modified standard and customized power solutions to a worldwide market. We are currently looking for an Assembler to join our team. Essential Duties and Responsibilities: * Performs visual inspection of printed circuit board assemblies and sub assemblies to ANSI/IPC 610 B soldering workmanship standards * Works with Engineering documents, visual aids, inspection instructions and checklists * Records and reports defects * Re-inspects reworked units * Identifies non-reworkable issues to the supervisor * Routes non-conforming material to the Material Review Board (MRB) * Applies use of Electro Static Discharge (ESD) precautions when handling products * Works independently in the Engineering Department with Engineers #ConRes # of Hires Needed 1 Exemption Type Non-Exempt Hiring Manager Job Requirements Qualifications or equivalent: High School Diploma or equivalent Minimum of 5 years in a Soldering/Rework position IPC Solderer Certification Ability to build electrical boards using engineering drawings Rework Certification Ability to identify solder defects for through hole and surface mount components Ability to distinguish the difference between rework and repair requirements Ability and willingness to train, learn and perform other duties as required Familiar with: * ANSI/IPC 610B workmanship standards * Electro Static Discharge (ESD) requirements * Ability to Read Engineering Bill of Material and other Engineering documents

Salary Description $21.00-$35.00/hour

ATTENTION MILITARY AFFILIATED JOB SEEKERS - Our organization works with partner companies to source qualified talent for their open roles. The following position is available to Veterans, Transitioning Military, National Guard and Reserve Members, Military Spouses, Wounded Warriors, and their Caregivers . If you have the required skill set, education requirements, and experience, please click the submit button and follow the next steps. Unless specifically stated otherwise, this role is "On-Site" at the location detailed in the job post. Job Description Because of the need for consistent, in-person collaboration and/or the requirement to perform all work onsite due to the nature of this particular role, it will be performed full-time on site. This means work will be conducted on location at a BAE Systems facility 100% of the time. Our employees work on the world's most advanced electronics. At Electronic Systems, you'll be among the brightest minds, working on the aerospace and defense industry's most difficult problems. Drawing strength from our differences, we're innovating for the future. And you can, too. We put our customers first - exemplified by our missions: “We Protect Those Who Protect Us ” and “We Innovate For Those Who Move The World™.” Sound like a team you want to be a part of? Come build your career with BAE Systems. Assemble parts for electromechanical equipment Self inspection of your completed work Read and interpret schematics, blueprints, process plans, and drawings Orders parts when needed Scribe or mark identifying information on parts and assemblies Utilizes fixturing to accurately build assemblies Inspect parts and materials for flaws and imperfections prior to use Use calipers and micrometers to measure parts and determine tolerances Manually solder or epoxy electrical components Use Solder Reflow Ovens, semi-auto P&P machines, and automated measurement systems Work with engineers to build newly designed parts and assemblies Analyzes and initiates assembly methods according to process requirements Makes frequent interdepartmental contacts to resolve problems Demonstrates intermediate computer skills Learn and use multiple Manufacturing Execution Systems (Paperless, Solumina, Promis) Employs Microsoft Excel and Word to enter, manipulate and format text and numerical data; insert, delete and manipulate cells, rows and columns; and create and save worksheets. Maintain appropriate training as required by the company, and adherence to company policies Production accuracy and quality driven Works in a Clean Room environment Assembles, disassembles, and modifies various production subassemblies by following work plans. Inspects results to ensure conformance Strong attention to detail and accuracy. Ability to work independently and as part of a team. Effective communication skills, both written and verbal. Basic computer skills, including using software for MRP and data collection. Willingness to learn new technologies and adapt to changing environments. Additional Qualifications/Responsibilities Required Education, Experience, & Skills High School Diploma or GED and 2+ years work experience or equivalent experience Ability to read and interpret work instructions and drawings. Ability to become solder certified Effective communication and team work Computer literacy, and familiarity with Microsoft suit of products (Excel, Word, Outlook) Strong work ethic, and a desire to be part of a successful working team A passion for learning/knowledge Preferred Education, Experience, & Skills Experienced in electronic assembly 3+ years IPC-610/620 Certifications Knowledge of MIL-STD-883 Methods 2021 and 2017 Solder Reflow experience Pay Information Full-Time Salary Range: $47488 - $75980

What we do matters! CPI Electron Device Business, with a history spanning more than seven decades, is a global leader in design, development, and manufacturing of electronic components and subsystems. We have locations in the United States and Europe. With a heritage of technological excellence, our team serves customers in the radar, defense, industrial, and scientific markets. CPI EDB produces thousands of products that have impacted people's lives in numerous unseen ways every day. Our highly engineered products serve as the backbone of modern-day commercial and military communications systems, support and protect soldiers, sailors, and pilots, empower scientific discoveries and space exploration, help ensure the safety of imported foods and materials, and much more. We are looking for energetic, agile, highly motivated, and customer focused individuals to join our team and help us to continue to be a market leader, shaping the future in communications and power. YOUR DAY TO DAY: We are seeking a detail-oriented and reliable Assembler I to join our manufacturing team. This role focuses on the precise assembly of sub-assemblies and chassis units, requiring work under a microscope and in a clean room environment. Ideal candidates will have experience with wire and ribbon bonding and a strong commitment to quality. YOU WILL BE ACCOUNTABLE FOR: * Precise assembly of sub-assemblies and chassis units. * Perform other duties as needed and assigned. YOU ARE THE RIGHT PERSON FOR THIS JOB IF YOU HAVE: * Solder Training, J-STD preferred. * Wire bonding preferred. * Clean Room experience preferred. * U.S. Citizenship and are able to obtain/maintain a U.S. Department of Defense Security Clearance. Salary Range: $17.50 - $23.00 / hour EMPLOYEE BENEFITS: We recognize and appreciate that our employees are our most important asset. We invest in employee wellbeing by offering a wide range of comprehensive benefits to help you achieve your best physical and emotional health for yourself and your family. Employee Health & Wellness Benefits * Medical, vision and dental insurance * Disability insurances * Life insurance and AD&D * Employee assistance programs * Workplace accommodations Financial Benefits * Competitive compensation * Annual performance and salary reviews * Generous retirement savings plans with company match * Paid time off * Paid holidays * Flexible work schedules * Educational reimbursement * Tax savings accounts * Employee referral bonuses * And more! * Please note that while our philosophy is the same in all locations, benefits may vary by office/country WHO WE ARE: We value the unique and diverse skills, qualities, and backgrounds that each employee brings to CPI EDB, and we respect each employee as an integral member of our growing team. CPI EDB is committed to providing equal employment opportunities for all current and prospective employees, as well as to promoting a culture of inclusion and respect for everyone. We celebrate the innovation that diversity creates in the work environment, and we recognize that each employee brings their own unique capabilities, experiences, and perspectives to the organization. It is this variety that adds value to our teams, as well as to our stakeholders. We welcome and encourage applicants to reach their full potential with us. CPI EDB is proud to be an Equal Opportunity and Affirmative Action employer. We do not discriminate based upon race, religion, color, national origin, sex (including pregnancy, childbirth or related medical conditions), sexual orientation, gender, gender identity, gender expression, transgender status, sexual stereotypes, age, status as a protected veteran, status as an individual with a disability or other applicable legally protected characteristics.

Schulte Staffing is are seeking a detail-oriented and skilled Assembler to join our client's sheet metal fabrication team. This role requires precision, patience, and strong hands-on ability to assemble and inspect sheet metal components. The Assembler will work with a variety of hand tools, measuring instruments, and materials such as honeycomb mesh to ensure products meet strict quality and performance standards. Responsibilities Assemble sheet metal parts and subassemblies according to blueprints, work instructions, and specifications. Use a variety of hand tools, such as wrenches, screwdrivers, and hammers, for precise assembly work. Operate and read micrometers, calipers, and other precision measuring instruments to verify dimensions and tolerances. Perform tedious and detailed hand work with a high degree of accuracy and consistency. Handle and integrate honeycomb mesh and other specialty materials into assemblies. Inspect components for defects, alignment, and compliance with quality standards. Maintain a clean, safe, and organized work environment. Follow all safety procedures and adhere to company policies. Qualifications Previous experience in a manufacturing, sheet metal, or assembly environment preferred. Ability to use and interpret measuring tools (micrometers, calipers, etc.) accurately. Strong hand-eye coordination and attention to detail. Ability to perform repetitive, precise tasks with accuracy. Comfortable working with small components and detailed assembly tasks. Strong problem-solving skills and commitment to quality. High school diploma or equivalent required; technical training is a plus. Physical Requirements Ability to stand, bend, and work with hands for extended periods. Lift and carry materials up to 25 lbs as needed. Perform fine motor tasks with precision and steadiness. You should be proficient in: Shop Math Skills Blueprint Reading Machines & technologies you'll use: EDM Machine (Wire) CNC Laser Cutter EDM Drilling Machine Calipers and Micrometers Salary info: $20 - $22 / hr

Job Description Job Title: Assembler - Second Shift FLSA Status: Non Exempt Responsible for the assembly of a variety of finished goods using customer supplied blueprints, specification and internally developed SOPs. The finished goods vary from simple handheld parts to large complex products and require a variety of tools and techniques to produce. This unique position will also be responsible for supporting the management of a finished goods inventory, packaging of products and shipment of products to our customers. Must be a team player and always willing to expand and improve your skills. Key Responsibilities · Assemble and package products from fabricated, machined and purchased components · Use a variety of hand tools including impact drivers, drills, screw drivers, wrenches and sockets · Ensure work is done safely and meets quality standards · Assist in managing a finished goods inventory using Computer System as well as physical inventory controls · Packaging of products for damage free transport and loading of materials onto trucks · Keep work areas clean and organized and take proper care of all equipment. · Follow company rules and policies · Provide a great level of attention to detail and focus on the given task · Follow safety rules and quality standards · Work with team members to maximize productivity and efficiency · Must have the ability to communicate in a clear and professional manner · Must wear PPE · Must show up at work on time and as scheduled. Required Qualifications · High School diploma or GED preferred · One year related experience and/or training preferred · Experience with steel, aluminum and/or stainless steel preferred · Experience with HVAC, plumbing/or industrial construction preferred · Ability to read blue prints a plus but we will train · Basic math skills Physical and Environmental Conditions · Ability to stand for long periods of time · Ability to stand, sit, bend and kneel without difficulty · Ability to repeatedly lift/pull/push 50lbs · Exposure to loud noises · Working in the presence of fork trucks and other manufacturing machinery Second Shift - 1:30 PM - 10:00 PM

Country: United States of America Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: Active and transferable U.S. government issued security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance Security Clearance: DoD Clearance: Confidential At Raytheon, the foundation of everything we do is rooted in our values and a higher calling - to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today's mission and stay ahead of tomorrow's threat. Our team solves tough, meaningful problems that create a safer, more secure world. *Starting Wage: $19.85* What You Will Do Replenishes chemicals, solvents, compounds, process fluids as required including dispensing into secondary containers and chemical cleaning. Operates and checks malfunctioning machinery/equipment and makes routine in-process adjustments, minor repairs, and replacement of worn parts Works to specifications, instruction sheets, prints, and written/verbal, video, and computer instructions to fabricate/assemble/inspect product manually, semi-automatically or automatically. Performs routine operations on production assemblies, harness and cables, substrates, fixtures, templates and holding devices. Prepares molds, loads and unloads units, mixes compounds and performs necessary products samples verification, and reworks/repairs product as required. Prepares and applies potting, bonding and coating compounds, lubricants, spray coats or insulated tape to a variety of component and assemblies including all finishing processes. Sets up and winds coil, assembles, and processes various types of magnetic electrical components. Assembles checks, test and adjusts inertial/gyros/accelerometers/optical instruments. Maintains cleanliness/production supplies for work area station including equipment. Provides routine equipment and workstation maintenance including necessary logs. Advances or retrieves product, material and tools for self and others. Operates multiple pieces of equipment simultaneously. Uses prescribed equipment to perform stenciling marking coding and potting operations as required. Performs routine visual, automatic and dimensional inspections and continuity measurements on a variety of products. Performs necessary operations to fabricate fixtures/holding devices as required for harness/cable processes. Performs drilling, grinding, sandblasting, staking, riveting, eye-letting, countersinking and counterboring operations, and other related mechanical processes. Incorporates engineering change orders and maintains process documentation. Performs general maintenance and housekeeping of workplace, tools and equipment. Maintains records, moves materials and follows safety rules in performance of duties. Performs other similar duties as required or directed. Qualifications You Must Have High School Diploma or Equivalency (GED). The ability to obtain and maintain a U.S. secret clearance prior to the start date. U.S. citizenship is required as only U.S. citizens are eligible for a security clearance. Post-Offer Testing Requirement: You will be required to take post-offer qualifying tests to determine whether you meet the qualifications for this position. Qualifications We Prefer Soldering experience. Works well with others. Has a track record of being reliable and dependable. What We Offer Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Trust, Respect, Accountability, Collaboration, and Innovation. Learn More & Apply Now! Please consider the following role type definition as you apply for this role. Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products. This position is part of a collective bargaining agreement. Wage and work place conditions, including shift times, are subject to this agreement. Individuals hired into this position will be represented by a union. Clearance Information: This position requires the eligibility to obtain a security clearance. The Defense Industrial Security Clearance Office (DISCO), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here: ************************************************ As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance.This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms

Country: United States of America Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: Active and transferable U.S. government issued security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance Security Clearance: DoD Clearance: Confidential At Raytheon, the foundation of everything we do is rooted in our values and a higher calling - to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today's mission and stay ahead of tomorrow's threat. Our team solves tough, meaningful problems that create a safer, more secure world. * Starting Wage: $19.85* What You Will Do * Replenishes chemicals, solvents, compounds, process fluids as required including dispensing into secondary containers and chemical cleaning. * Operates and checks malfunctioning machinery/equipment and makes routine in-process adjustments, minor repairs, and replacement of worn parts * Works to specifications, instruction sheets, prints, and written/verbal, video, and computer instructions to fabricate/assemble/inspect product manually, semi-automatically or automatically. * Performs routine operations on production assemblies, harness and cables, substrates, fixtures, templates and holding devices. * Prepares molds, loads and unloads units, mixes compounds and performs necessary products samples verification, and reworks/repairs product as required. * Prepares and applies potting, bonding and coating compounds, lubricants, spray coats or insulated tape to a variety of component and assemblies including all finishing processes. * Sets up and winds coil, assembles, and processes various types of magnetic electrical components. * Assembles checks, test and adjusts inertial/gyros/accelerometers/optical instruments. * Maintains cleanliness/production supplies for work area station including equipment. * Provides routine equipment and workstation maintenance including necessary logs. * Advances or retrieves product, material and tools for self and others. * Operates multiple pieces of equipment simultaneously. * Uses prescribed equipment to perform stenciling marking coding and potting operations as required. * Performs routine visual, automatic and dimensional inspections and continuity measurements on a variety of products. * Performs necessary operations to fabricate fixtures/holding devices as required for harness/cable processes. * Performs drilling, grinding, sandblasting, staking, riveting, eye-letting, countersinking and counterboring operations, and other related mechanical processes. * Incorporates engineering change orders and maintains process documentation. * Performs general maintenance and housekeeping of workplace, tools and equipment. * Maintains records, moves materials and follows safety rules in performance of duties. * Performs other similar duties as required or directed. Qualifications You Must Have * High School Diploma or Equivalency (GED). * The ability to obtain and maintain a U.S. secret clearance prior to the start date. U.S. citizenship is required as only U.S. citizens are eligible for a security clearance. * Post-Offer Testing Requirement: You will be required to take post-offer qualifying tests to determine whether you meet the qualifications for this position. Qualifications We Prefer * Soldering experience. * Works well with others. * Has a track record of being reliable and dependable. What We Offer * Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Trust, Respect, Accountability, Collaboration, and Innovation. Learn More & Apply Now! * Please consider the following role type definition as you apply for this role. * Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products. This position is part of a collective bargaining agreement. Wage and work place conditions, including shift times, are subject to this agreement. Individuals hired into this position will be represented by a union. Clearance Information: This position requires the eligibility to obtain a security clearance. The Defense Industrial Security Clearance Office (DISCO), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here: ************************************************ As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms

Job Description Production Assembler Amphenol Ardent Concepts is a leading designer and manufacturer of high performance multicoax and coaxial assemblies, connectors, and sockets used in the development of next generation semiconductors and electronics systems. Our core technology is the smallest, fastest, and most electrically efficient compression mount connector technology worldwide. As data rate requirements increase and devices and systems shrink, Ardent Concept's products deliver superior signal integrity in a dense footprint that can be reusable across programs to maximize cost savings. No experience necessary. Willing to train crew members who demonstrate excellent hand/eye coordination with microscopic parts, who otherwise qualify. Candidates that have experience with arts and crafts, small model building, jewelry making, or small intricate mechanical devices may have the skills applicable to work with these micro assembly products. This is a full time, first shift position. The hours are Monday through Thursday, 7:00am to 5:30pm. RESPONSIBILITIES: Micro assembly product lines while working through microscope Prepare and assemble materials, build product subassemblies or final assemblies, plate product. Test and inspect products or subassemblies for functionality and quality. Set up and operate production fixtures and tools in accordance with good manufacturing practices and standard operating procedures. Inspect finished products for quality and adherence to engineering prints. Adhere to all applicable regulations, policies, and procedures for health, safety and environmental compliance. Clean production equipment, products, and work areas. Measure and record data associated with products. Other tasks as assigned by supervisor. QUALIFICATIONS: High level of hand/eye coordination with ability to work extended periods on a microscope Ability to perform mathematical calculations Familiarity with engineering drawings is preferred High school diploma or equivalent Physical agility This job operates in a lab/manufacturing setting. While performing the duties of this job, the employee is frequently exposed to fumes and moving mechanical parts. The noise level in the work environment can be loud. Computers and machines are used, and the employee must be coordinated and have the ability to lift and or move up to 25 lbs. Specific vision abilities required by this job include close, distance, color, and peripheral vision. Must have depth perception and ability to adjust focus.

assembler b vacuum braze All Job Posting Locations (Location) Woburn Remote Type On-Site EEO Statement Boyd Corp is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees.

Full-time Description Since 1904, Nelson Miller Group (NMG) has been a leading global provider of custom solutions, partnering with organizations across industrial, IoT, lighting, medical, telecommunications, consumer, and aerospace and defense sectors. We bring complex products to life by solving intricate challenges in engineering design, manufacturing, and supply chain management. Our expertise spans Human-Machine Interface (HMI) solutions, value-added distribution, plastics, membrane switches, overlays, touch panels, electronics, metals, and cables. Our century-long legacy is built on a deep commitment to innovation, operational excellence, and unwavering customer satisfaction. These principles drive everything we do as we continue to grow and expand our global market presence. Description Under the direction of the Production Supervisor and/or Production Group Leader perform assembly tasks as assigned, efficiently and accurately and in a timely manner Duties and Responsibilities: Arrive at work on time and follow all time in/time out policies of the company. Perform all assigned jobs per work order instructions. Notify supervision if work instructions are not available, accurate or complete. Keep work area/shop organized and picked up as required. Complete all required time sheets and work orders each day. Notify management when problems occur with equipment Responsible for knowledge and adherence to all ERP procedures as regards production assembly. Responsible for knowledge and adherence to, and promotion of quality policies, procedures and work instructions. Responsible for adherence to and promotion of maximum safety standard, ensuring personal and fellow employees' safety by adhering to company safety rules and procedures. Responsible for adherence to applicable ITAR regulations. Perform other duties as may be required by supervisor. Requirements Education: High School Diploma or equivalent. Experience: Previous assembly experience in a manufacturing environment is preferred. Skills: Strong attention to detail and manual dexterity. Basic math skills. Ability to read, write, and speak English clearly. Ability to follow detailed instructions and work independently. Familiarity with ERP systems is a plus. Work Ethic: Punctual, reliable, and committed to maintaining high standards of quality and safety. Additional Requirements Due to ITAR and / or CUI compliance, this position requires candidates to be a U.S. Citizen, Permanent Resident Alien, or Protected Individual per 8 U.S.C.1324b(a)(3). Candidates being considered for hire must pass a pre-employment background check. Compensation and Benefits: Pay Range: $18.25 - $20.00 per hour (Pay to be determined by the experience, knowledge, skills, and abilities of the candidate, and alignment with market data). Benefits Offered: Comprehensive benefit package including medical, dental and vision coverage; company-paid basic life/AD&D insurance, voluntary supplemental insurances, etc. Sick Leave, Vacation Time, and company-paid Holidays are provided as paid time off. New England Keyboard also provides a 401(k) Retirement Savings Plan option with a safe harbor non-elective company contribution. New England Keyboard/Nelson Miller Group is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex including sexual orientation and gender identity, national origin, disability, protected Veteran status, or any other characteristic protected by applicable federal, state, or local law.

Please note this a position for 2nd shift (5:00 PM - 3:00 AM) Monday - Thursday offering an additional a 12% shift pay differential. About Us: As a global manufacturer of complex aircraft engine components, Pursuit Aerospace is founded on a commitment to relentless, continuous, operational improvement and extraordinary customer service. We pride ourselves on competitive cost structure, exceptional on-time delivery, and industry-leading quality. The Pursuit family of companies has cultivated long-term relationships with our customers around the world through respect, teamwork, technology, and trust. We are driven to develop industry leading process innovations and manufacturing techniques on behalf of our customers. Our exceptional quality is driven by a deep investment in and the daily practice of continually improving our people, processes, and products. About the Opportunity: The Assembler is responsible for assembling precision-machined components, ensuring they meet specifications and quality standards. This includes using hand and pneumatic tools, as well as precision measuring instruments, to assemble, test, and finish parts. The role requires interpreting engineering drawings, performing quality inspections, and maintaining efficient workflow on the shop floor. Location: Malden, MA Responsibilities: Assembly Operations: Perform all tasks required to assemble precision components, including layout, fabrication, fitting, and testing of parts. Ensure parts meet design specifications and quality standards. Quality Control: Conduct visual and dimensional inspections using measuring tools such as calipers, micrometers, and scales to verify part conformance. Identify and resolve any quality issues during the assembly process. Tool & Equipment Usage: Utilize hand and pneumatic tools with a high degree of dexterity to assemble, fit, and finish parts. Ensure tools and equipment are maintained in good working condition. Blueprint Interpretation: Read and interpret technical drawings, sketches, blueprints, and specifications to guide the assembly process. Make adjustments to assemblies based on detailed instructions. Collaboration: Work closely with team members and supervisors to meet production schedules and resolve any assembly-related issues. Communicate effectively regarding assembly progress and any concerns that may affect timelines or quality. Continuous Improvement: Identify opportunities for improving assembly processes, contributing to efficiency and reducing waste or defects. Suggest improvements to tools, techniques, or workflows to enhance productivity. Safety and Compliance: Follow all safety procedures and protocols while operating machinery and tools. Ensure adherence to company policies, safety standards, and best practices in all aspects of the role. Required Qualifications: Minimum of 3 years of experience in mechanical assembly, with a strong emphasis on aerospace manufacturing, fabrication, and assembly processes. St least two years as a mechanical or manufacturing assembler required. Must be authorized to work in the U.S. on a full-time basis without sponsorship now or in the future. The Company cannot offer employment to visa holders who require employer sponsorship in the future or cannot work now on a full-time basis. Must be able to perform work subject to ITAR/EAR regulations At least 2 years of hands-on experience demonstrating manual dexterity and proficient use of hand and pneumatic tools. 3+ years of experience operating precision measuring instruments, including but not limited to scales, micrometers, and calipers. Must be authorized to work in the U.S. on a full-time basis without sponsorship now or in the future. The Company cannot offer employment to visa holders who require employer sponsorship in the future or cannot work now on a full-time basis. Must be able to perform work subject to ITAR/EAR regulations. Preferred Qualifications: Attention to Detail: Ability to focus on small details and ensure high accuracy in all assembly tasks, minimizing errors and rework. Adaptability: Willingness to learn new assembly techniques, tools, or technologies as needed to meet evolving production requirements. Teamwork & Collaboration: Ability to work well within a team, supporting colleagues and contributing to a positive work environment. Time Management: Strong ability to prioritize tasks, manage time effectively, and meet deadlines without compromising quality. Quality Focus: Demonstrated commitment to maintaining high-quality standards and ensuring compliance with all regulatory requirements, especially in aerospace. Pre-Employment Screening: As a federal contractor in the defense industry, Pursuit Aerospace is subject to federal regulations. All offers of employment are contingent upon successful completion of background checks, drug and alcohol screening, and employment eligibility verification. Physical Requirements: Requires mobility in a manufacturing plant environment while using Personal Protective Equipment. Must be able to frequently sit, stand and walk. Must be able to lift and carry up to 15 pounds. Compensation & Benefits: Pursuit Aerospace also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, paid time off, and company-paid holidays. The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements, among other things. Pursuit is an Equal Opportunity Employer.

At Spartronics, we're not just building products, we build products lives depend on. As an electronic manufacturing services (EMS) provider for the commercial aerospace, defense, medical device, life science, and industrial markets, we work to deliver products of the highest quality and reliability. Our organization provides comprehensive contract manufacturing services, ranging from printed circuit board assembly (PCBA) and subsystem integration to full-box build (high-level assemblies). Additional services include engineering support such as manufacturing testing, supply chain management, sustaining engineering, and a suite of aftermarket services to support the full OEM product lifecycle. With over $500 million in revenue, approximately 1,400 dedicated employees, and manufacturing resources strategically located worldwide, our manufacturing network spans the United States and Vietnam. To learn more about our sites, please visit ************************************** Why Join Us: When you become a part of Spartronics, you're joining a team of dedicated and talented, individuals who share a common goal - to win as one. We value talent, innovation, and a hunger for growth. Here, you'll have the opportunity to work with industry leaders in Aerospace & Defense, Medical & Life Science, and Industrial markets where our customers put full trust in us to deliver the most complex, highly regulated products that have to work the first time, every time. Summary: At Spartronics, our Assemblers perform routine and/or repetitive operations in a flexible manufacturing environment in accordance with standardized processes, procedures, or methods. May require frequent movement throughout the manufacturing operation. What a Day Looks Like: Mechanical and/or electrical operations or assemblies involving fixed indicating meters, in-circuit test/functional test, marking machines, jigs & fixtures, packaging equipment, wire cutting, stripping & twisting equipment, various types of fastening devices involving power operations, hand tools and gauges (fixed, micrometers, calipers, rules). Ability to solder in accordance with J-STD-001 and IPC-620 or ability to be trained Responsible for daily clean-up of all assigned work areas and to practice Good Housekeeping skills. Use computer skills with applicable MS office programs and other software. Assemble and/or repair printed wiring assemblies (PWA), subassemblies, instruments, and final assemblies of various components utilizing a wide range of tools, work processes and skills to approved documented procedures/specifications. Deploy sound inventory control methods and procedures. This will include being able to allocate materials to work orders, incoming inspection assistance, and ability to issue inventory in MRP if applicable. Handle, mix and test hazardous chemicals while using PPE. Basic duties as required to meet production needs. Must also be flexible to OT or a flex schedule. Work in a team environment Ensure the safety & wellbeing of all employees and visitors to the facility. Ensure compliance with all safety, environmental & regulations, operating & work instructions, policies and rules in place. Report any possible violations to Management immediately. Any other duties as assigned by management. Requirements What You'll Need: High school graduate or equivalent. Must have reliable transportation. Ability to read and comprehend written work instructions. Ability to effectively communicate in verbal and written form. Ability to add and subtract whole numbers, fractions and decimals using direct reading, gauges, rulers, and scales. Must be quality conscious and have a good work ethic. Must maintain ESD Precautions Standards certification in areas/facilities where required (training provided by employer) May be required to lift or exert up to 55 pounds as required by the job task. Ability to read and understand schematics, wire diagrams, and mechanical drawings. ITAR Regulations require all candidates be a US Citizen, US Permanent Resident, Political Asylee, or Refugee. Our Commitment: At Spartronics, we're dedicated to fostering an inclusive, diverse, and equitable workplace. We believe that diverse perspectives drive innovation, and we welcome candidates of all backgrounds to apply. Our culture at Spartronics values accountability, unity, respect, and transparency. These winning values are the lifeblood of our business. We embrace diversity through people who believe in these values. Embracing our employees' differences enables us to be a stronger team. Join Our Journey: If you're ready to be a part of something extraordinary, challenge the status quo, and shape the future, then we want to hear from you. Together, we'll continue to win, while we build products lives depend on. Our Benefits: Full range of medical, dental, and vision benefits. Flexible Savings Accounts for Medical, Dependent Care, and Limited Purpose (dental and vision only) PTO and Holiday Pay Company-paid life insurance and disability at 1 times your annual salary at no cost to you, with options to increase coverage amounts 401k with a company match of 50% to every dollar up to 6% Accident, Critical Illness, Hospital Indemnity, and Legal Insurance optional plans Employee Assistance Program Tuition Reimbursement Opportunities to grow and excel in the Electronics Manufacturing industry at a company that values promotions and learning from within. Every day is different, challenging, and rewarding. How to Apply: If this sounds like the perfect opportunity for you, please apply with your resume outlining your qualifications and why you're excited about joining Spartronics. Spartronics is an equal opportunity Employer/Veteran/Disabled 41 CFR 60-1.4. We comply with federal Affirmative Action guidelines in all employment opportunities for qualified employees and applicants. We encourage applications from candidates of all backgrounds and experiences.

Job DescriptionSalary: $18 Westaff is looking for an Electronic Assembler in the Sterling MA area for Immediate Start! Pay: $18/hour Shift: Monday-Thursday 6am-430pm Responsibilities: Assembly of fire alarm and life safety notification systems Work with a team to assemble entire products or components Rotate through tasks for specific production processes Conduct quality inspections on products and parts Prepare finished products for shipment Maintain a clean and orderly work area Temp to perm position Apply now for Immediate Consideration!

We are looking for an experienced Assemblers to join our fantastic team! The position is on first shift 7-3:30pm Monday through Friday. This opening is not a soldering position. Key Skills & Responsibilities Assembly Tasks Read and interpret blueprints, schematics, and work instructions Perform mechanical assembly / electrical assembly Use hand and power tools (screwdrivers, drills, torque wrenches, Fit, align, and secure components according to specifications Inspect parts for quality and accuracy Production / Quality Follow standard operating procedures (SOPs) Maintain production efficiency Perform quality checks, testing, or visual inspections Record production data or defects Support continuous improvement and lean manufacturing initiatives Safety & Environment Follow safety protocols and PPE requirements Maintain a clean and organized workstation Comply with ISO / OSHA standards ?? Qualifications & Traits These are great for both job postings and resume keyword matching: Attention to detail Manual dexterity Teamwork and communication Dependability / reliability Basic math skills Ability to lift up to 50 lbs Problem-solving skills Time management Experience with assembly line / production environment ?? Tools & Equipment Keywords Calipers / micrometers Torque wrenches Pneumatic tools manual assembly tools Jigs and fixtures Measurement devices Metal Works has a competitive benefits package, Tuition Reimbursement, 401K and many other options.

For description, visit PDF: ************ ueonline. com/wp-content/uploads/Assembler-I-External-Posting-10. 29. 25-1. pdf