Assembler jobs in Parsippany-Troy Hills, NJ

Job Description Electro-Mechanical Assembler 1st Shift Mon-Fri 7 am-3:30 pm (OT - 6 am - 3:30 pm) Effective w/e 11/25/2023, all new starts for Boonton will have a 30% increase to their base pay to cover the client\'s compensation package. Please inform the contractor that they will lose their 30% increase at conversion but will gain their benefits, including PTO and Holiday pay. This is due to the new law passed in NJ. Position Summary: Responsible for complex and diversified assembly of a variety of products in which mechanical drawings or work instructions are provided. Intricate fitting, adjusting, and aligning of a considerable number of parts (involving close tolerances and interrelated factors) are required to complete products, units, or sub-assemblies. Hand tools and usage of machines will be required to perform the assembly. Follows schedule provided by SAP and management. Position Responsibilities: Assembles and/or wires complex equipment following blueprints, models, and model prints. Skilled adjusting, fitting, and aligning are required within close tolerances. Follows work cell procedures or mechanical drawings and product structures. Sets up, operates, and maintains basic production machines such as component engravers, presses, crimpers, riveting or encapsulation machines. Is flexible and able to perform many operations on product in and outside of home department. Uses hand and power tools as required. Builds harness assemblies. Light usage of computers to monitor and report job status and component availability. Will need to be able to open prints or work instructions from system and write to excel or SAP databases. May perform thru-hole PCB assembly. Performs related duties as assigned by Supervisor. Works overtime as required. Strives to meet prescribed quality standards in an ISO environment. Follows proper use of PPEs to promote a safe work environment and performs 5S steps to ensure clean, hazard-free, and efficient work area. Skills and Experience Required: Minimum of 1-3 years electro-mechanical assembly experience. Mechanical assembly with electronic/electrical safety knowledge is acceptable. Ability to read blueprints and schematics; read and identify proper components and color schemes. Must present excellent workmanship standards. Must have good verbal communication skills.

So why join Hologic? You will have the opportunity to get in on the ground floor at a high growth facility to create a manufacturing process working on life-saving medical devices with potential for future growth. This is a great opportunity to enhance you manufacturing operation skills and knowledge to further your career. What to expect: Electro/Mechanical Assemblers perform a wide variety of electronic, electro-mechanical, mechanical or measurement product assembly operations on product components, assemblies, or sub-assemblies. Determines and/or follows methods and sequence of operations in performing wiring, component installation, hand soldering, cable harnessing, welding, and fitting on assembly units. Executes production operations as well as performing rework and quality testing related to the production of parts, components, subassemblies, and final assemblies. Responsible for following all operating procedures to the highest standard. What we expect: E/M Assemblers to work collaboratively with manufacturing associates, engineering, quality, and leadership to execute production requirements. Supports engineering experimentation and operational improvement initiatives as requested. Participates in teams to identify opportunities for improvement within production area. May assist in developing methods and procedures to control or modify the manufacturing process. Skillset: Proficient working understanding of Microsoft Office platform including Excel, Word, SharePoint, and OneDrive required. Ability to read, understand, and follow all written procedures. Ability to communicate effectively, both written and verbally. Ability to work both independently and as a member of a team. High-level of attention to detail and focus on quality. Detail oriented and accurate. Must be able to read, write, and understand English. Trained to execute 3-4 roles within the Operations team. Certified as a Subject Matter Expert for 1+ roles within the Operations team IPC 610 / 620 Certification. Experience with Oracle ERP system. Experience with Agile Product Lifecycle Management system. Knowledge of Electrostatic Discharge (ESD) handling best practices. Education & Experience Minimum of High School diploma/General Education Degree (GED) or Associate Degree 0-1 years of experience in Manufacturing The annualized base salary range for this hourly role is $39,100-$58,600 and is bonus eligible. Final compensation packages will ultimately depend on factors including relevant experience, skillset, knowledge, geography, education, business needs and market demand. Agency and Third Party Recruiter Notice: Agencies that submit a resume to Hologic must have a current executed Hologic Agency Agreement executed by a member of the Human Resource Department. In addition Agencies may only submit candidates to positions for which they have been invited to do so by a Hologic Recruiter. All resumes must be sent to the Hologic Recruiter under these terms or they will not be considered. Hologic, Inc. is proud to be an Equal Opportunity Employer inclusive of disability and veterans.

Thorlabs is pleased to play a role in advancing science through the components, instruments, and systems we design and manufacture. We believe that science and innovation have great potential to improve the world around us and are committed to advancing photonics (i.e., light-based) technologies that positively impact our customers, employees, and communities. Via educational outreach and more sustainable business practices, we continuously invest in a brighter future. We recognize that each of our employees is a unique individual with the ability to contribute to our success and seek to find great people who will thrive in our fun, fast-paced culture. Purpose of the Position This position works among a team of individuals working with mechanical products for our customers. The position is responsible for assembling and packaging. As part of our LEAN Manufacturing business strategy, the position is located within a work "cell" assembling a variety of components ranging in complexity throughout the day. Although the location of the position is in Newton, NJ, from time to time it may be required to undertake duties at other Thorlabs locations. Essential Job Functions include the following, but are not limited to: * Must be able to understand written work instructions for a wide range of products to properly assemble the final product to the highest of quality standards and with zero scrap or rework. * Assemble and package components and products of varying size and complexity that includes cleaning, inspecting and testing of assembled components and assemblies. * Meets the expected assembly timelines that are outlined on the production orders * Ask questions when instructions are not understood or clear * Assists in inventory Cycle counting as needed and notify supervisor of low stock levels. * Performs any combination of the above duties from the functions above. Cross-train on various functions in order to provide flexibility and support across production operations. * Must maintain a safe and clean working environment through compliance with procedures, policies and regulations. In addition to the essential functions and duties listed above, all positions are also responsible for: * Meeting company standards pertaining to quantity and quality of work performed on an ongoing basis, performing all work related tasks in a manner that is in compliance with all Company policies and procedures. * Adhering to Company policies, procedures, and directives regarding standards of workplace behavior in completing job duties and assignments. The Company retains the right to change or assign other duties to this position. Qualifications Experience: * Minimum 1 year of experience in a similar position preferred. Education: * High School diploma or equivalent Specialized Knowledge and Skills: * Must be able to understand written work instructions. * Strong attention to detail * Demonstrated ability to work in a team environment and comply with high quality standards. * Strong ability to shift from one task to another to address changing production priorities. Hourly rate for this position is $18.00 Thorlabs values its diverse environment and is proud to be an Equal Employment Opportunity/Affirmative Action employer. All qualified individuals will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age or veteran status. Job descriptions are not intended as and do not create employment contracts. The organization maintains its status as an at-will employer. Employees can be terminated for any reason not prohibited by law. Thorlabs offers a complete benefits package that includes medical, dental and vision insurance, company paid life insurance, a generous PTO package, a 401(k) plan, and tuition reimbursement just to name a few.

Job Title: Mechanical Assembler FLSA Status: Non-Exempt Full Time Department: Manufacturing Reports to (Title): Vice President of Technical Operations The Mechanical Assembler is responsible for safe, accurate, and efficient assembly of mechanical parts using a variety of tools and equipment to build high precision test equipment according to required specifications, processes, and procedures. Fine motor skills and high quality standards will be required to ensure efficient and accurate assembly, suitable for a high quality, high value final product. Essential Functions of the Position: Include the following, but other duties may apply. Assemble units using standard hand and power tools by reading from drawings and diagrams. Inspection of incoming mechanical parts and pieces; reject and notify supervisor of product which does not conform to specifications. Study and interpret drawings, assembly instructions, and/or standard work instructions to accurately assemble components. Assemble sub-assemblies in the established routed hours to deliver the product on or before the due date. Determine if all parts are present; communicate to immediate supervisor the status of needed parts to produce units. Document WIP (digitally and/or photographically) to the designated network folders Rotate through other production lines to assist where needed. Perform co-worker's job functions during absences within the department. Perform tasks in accordance with company safety standards. Use any specialized tooling that is required in respective area. Complete any necessary certifications if required to do so. Maintain a working knowledge of workmanship standards as well as the ISO quality system. Utilize these practices in everyday activity. Ensure all parts are fitted and screwed in properly. Interpret measurements. ESSENTIAL SKILLS AND EXPERIENCE (education, prior work experience, special skills, etc.) High school education or equivalent; OR at least one (1) year of related experience in general assembly work or mechanical trade work. English fluency and able to communicate with others effectively. Basic understanding of how to use non powered hand tools Basic computer skills; ability to learn/use new programs, i.e. printer or camera software Well organized with a high level of attention to detail. Must be able to follow instructions, take notes, and work independently. Can adapt and thrive in a constantly changing environment. Proficient in reading and interpreting blueprints and schematics for placement of parts. Proficient in using standard measuring devices such as tape measures, scales, squares, etc. Able to identify and safely operate standard hand, power and air tools. Benefits We offer the following benefits to full-time employees who have met all eligibility requirements: Group medical, dental, and vision plans, group life/AD&D, and long-term disability insurance. Group 401(k) plan with company matching contributions. Paid time off and company-paid holidays. Physical Demands/Sensory Function: Frequency of Use: Stand Frequently Walk Frequently Sit Regularly Use hands Regularly Reach with hands and arms Regularly Climb or balance Occasionally Stoop, kneel, crouch, or crawl Occasionally

Manufacturing Assembly in Fairfield, NJ Pay: $17/hr. Schedule: Mon-Fri 6am-2:30pm Benefits, and Weekly Pay iBoost Talent is hiring for an Assembly / Manufacturing Associate located in Fairfield, NJ. Our positions are full-time, year-around employment with paid training. Pay $17.00 per hour Schedule 1st Shift; Mon-Fri 6am-2:30pm with occasional overtime Position Overview: This position is responsible for performing light assembly, machining, or packaging of manufactured products while maintaining the specified the quality, efficiency, and inventory control requirements. Work assignments will be scheduled based on training proficiency. depending on the tasks assigned for the day, you may have to sit or stand more or less frequently. Typical assembly work is repetitive in nature. Steel-toed shoes are required for working in this position. Regular production/warehouse environment (no air conditioning). Key responsibilities include: Understanding and executing verbal instructions related to your duties. Inspecting work to ensure quality and accuracy. Transporting completed products to designated locations using proper material handling methods. Monitoring and replenishing raw materials as needed for operations. Completing all required documentation and electronic data updates. Preparing and packaging units for shipment. Assisting with various duties across departments as necessary. Maintaining a clean workstation in accordance with 5S procedures. Achieving or exceeding pre-established performance objectives. Upholding our core values: Integrity, Customer Responsiveness, Innovation, Passionate Contribution & Empowerment, and Continuous Improvement. Identifying and reporting workplace hazards while participating in safety programs and initiatives. Job Requirements: Fluency in reading, writing, and speaking English. Basic mechanical, math, and problem-solving skills. Proficiency in operating equipment such as basic machining posts, saws, paint sprayers, and hoists. Ability to read and interpret assembly drawings, blueprints, BOMs, and associated procedures. Competence in using measurement tools like tape measures, micrometers, and calipers. Familiarity with basic hand tools (hand drills, screwdrivers, hammers, etc.). Flexibility to adapt to changing priorities and tasks. Strong teamwork skills and the ability to follow directions. Proven reliability in attendance and punctuality. Understanding of basic lean principles (5S, Kanban). Preferred Qualifications: High School diploma or GED. Previous manufacturing experience is a plus. Working Conditions/Physical Demands: This position requires standing for 8 hours a day, with coordinated hand and finger movements for grasping, manipulating, and assembling objects. You will frequently use vibrating/pneumatic tools and may need to reach overhead, bend, twist, stoop, kneel, or squat. The role involves lifting and carrying up to 40 lbs regularly. Depending on the tasks assigned for the day, you may have to sit or stand more or less frequently. Typical assembly work is repetitive in nature. Steel-toed shoes are required for working in this position. Regular production/warehouse environment (no air conditioning). Note: Nothing in this job description restricts management's right to assign or reassign duties and responsibilities to this job at any time. iBoost Talent is proud to be an Equal Opportunity Employer. You will be considered for this position based upon your experience and education, without regard to race, color, religion, age, sex, national origin, sexual orientation, ancestry; marital, disabled or veteran status. We are committed to creating and maintaining a workforce environment that is free from any form of discrimination or harassment. EOE Thank you for your interest in iBoost Talent, we are proud to be an Equal Employment Opportunity Employer and participate in the E-Verify eligibility confirmation program.

Our client, a leader in the semiconductor industry, is looking for a “Manufacturing Assembler- Shift 2” based out of Totowa, NJ. Duration: Long Term Contract(Possibility Of Further Extension) Pay Rate: $21 - $24/hr We are seeking a motivated Electrical Sub-Assembler to join our manufacturing team. In this role, you will be responsible for assembling electrical subassemblies, wiring components, and performing quality checks to ensure compliance with engineering specifications. You will work closely with senior assemblers and engineers to troubleshoot issues and improve processes. This is an excellent opportunity for individuals with a keen interest in electrical assembly and hands-on manufacturing. Key Responsibilities: Assemble wiring, connectors, circuit boards, and enclosures following schematics. Install and secure electrical components such as resistors, capacitors, and transformers. Perform basic soldering, crimping, and wiring to ensure secure connections. Conduct continuity tests, voltage checks, and functional testing of subassemblies. Inspect assembled components for accuracy, defects, and compliance with specifications. Maintain records of assembly steps, parts used, and testing results for traceability. Use soldering irons, crimping tools, multimeters, and hand tools for assembly tasks. Education & Qualifications: High school diploma or equivalent. Basic understanding of electrical components and schematics. Ability to use hand tools, power tools, and electrical testing equipment. Strong attention to detail and ability to follow instructions. Good manual dexterity for working with small components. Company Benefits include: Healthcare, Paid Sick leave & 401k (with 4% employer match) If interested, kindly send us your update resume at hr@dawarconsulting.com/************************

COMPANY CULTURE Our focus is to deliver world-class solutions to our customers, on time and of the highest quality as the preferred supplier of highly engineered, energetic, and pyrotechnic devices while developing our associates and maximizing long-term value for our shareholders through organic growth and targeted acquisitions. GENERAL STATEMENT OF DUTIES: An individual who under moderate supervision applies standard procedures to perform a variety of component assembly tasks, ensuring products meet our high standards. ESSENTIAL DUTIES AND RESPONSIBILITIES: An Assembler is an individual who under moderate supervision applies standard procedures to perform a variety of component assembly tasks, ensuring products meet our high standards Assembles components in accordance with drawings and operation sheets. Responsible for weighing, loading and pressing operations. Handle tooling and fixtures / use various hand tools to produce or modify parts. Maintains count and order progress and logs in time / quantities. Closes and assembles units (use of crimping and closure tools and epoxy applications). Soldering tasks, i.e. small wire soldering, terminal soldering, bridge wire welding. Assists with the packaging of pyrotechnic assemblies where required. Follows required company safety practices and quality procedures. Follows procedures as defined by CAD policies, procedures and ISO9001 requirements. Maintains confidentiality of all information processed. Perform other related duties as assigned. PHYSICAL DEMANDS: While performing the duties of this job, the employee is occasionally required to stretch, bend, kneel and stoop. The employee is regularly required to walk, communicate, and reach with hands and arms. The employee is frequently required to sit, stand, and use hands to finger, handle, or feel. The employee must occasionally lift and/or move up to 50 pounds using appropriate moving devices. Specific vision abilities required by this job include close vision, color vision, depth perception and ability to adjust focus. WORK ENVIRONMENT: While performing the duties of this job, the employee is regularly exposed to solder, fluxes, cleaners, epoxies, and masking agents while using appropriate personal protective equipment. Works in a temperature controlled environment. The noise level in the environment is usually low to moderate. DISCLAIMER The above information on this description has been designed to indicate the general nature and level of work performance by employees within this classification. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities and qualifications required of employees assigned to this job. Cartridge Actuated Devices is an Equal Opportunity Employer and encourages the application of female, minority, disabled, and veteran candidates. Due to the potential for exposure to ITAR controlled data, the incumbent in this role must be a US Person (US Citizen or US Permanent Resident). Due to the nature of our products, To the extent applicable to an employee's role, each employee must be able to obtain (and maintain) the ATF Possessor License as a condition of employment. Employment with Cartridge Actuated Devices is contingent upon the successful completion of a background investigation, including any required Bureau of Alcohol, Tobacco, Firearms and Explosives (ATF) screening, and drug screening, as permitted by applicable law. The background investigation may include verification of employment history, education, criminal records, ATF-mandated checks, and other relevant information to determine suitability for employment. The drug screening will be conducted in accordance with state and federal regulations. Failure to successfully pass the background check, ATF screening, or drug screening, or the provision of false or misleading information during the application process, may result in withdrawal of a job offer or termination of employment. By proceeding with the application process, you acknowledge and consent to the background, ATF, and drug screening requirements as described above.

The Senior Electronic Assembler works under moderate supervision and performs the various tasks necessary to assemble micro-electronic assemblies for production. The Assembler will also perform standard assembly, die bonding, wire bonding, and installation steps for the components required in production line assemblies. This includes the documentation necessary to track the traveler (electronic or paper) and the assembler's performance. Job Responsibilities: Performing a wide variety of electrical/mechanical product assembly operations on components, assemblies, or sub-assemblies. Preparing assembly work to be accomplished by studying assembly instructions and following blueprint specifications Populating PCB's from Work Instructions and Assembly Drawings / Bills of Material Assembling components by positioning parts and sub-assemblies examining connections for correct fit, and fastening parts and sub-assemblies Performing two or three of the following job duties; Board Mount; Solder SMT components on PCB's Assembling PCB's into housings using wire bonding and die attach. Cleaning PCB's and assemblies throughout process and after completion Continuously meeting/exceeding production schedules and deadlines according to quality standards Maintaining logs and paperwork and forms accurately consistent with company policy and practices Other duties as assigned Required Qualifications: High School Diploma or equivalent Typically requires a minimum of 3-5 years of work experience in microelectronic assembly (die attach / wire bonding) Ability to read assembly drawings Knowledge of ESD (Electrostatic discharge) procedures Knowledge of basic computer skills Ability to work with general instruction on daily activities Basic reading and writing in English as well as basic arithmetic skills Must have meticulous hand-eye coordination and manual dexterity Ability to work under a microscope for long-periods of time Must be detail oriented and able to multitask Must be able work in a fast paced, team orientated environment Preferred Qualifications: Experience with RF/Microwave assemblies IPC-A-610 or J-STD-001 qualifications Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is required to: Requires good manual dexterity, coordination, and stamina. Ability to safely control surgical razor blades and small hand tools used to manipulate tuning stub under a microscope and working under a microscope for long periods of time will be required. Specific abilities required by this job include the frequent requirement of overtime work. This position requires you to access information that is subject to U.S. export regulations. You may only access such information if you are a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. government. Job Details Fulltime Equivalent Job Grade Range for this Position: • $44,000.00 - $88,000.00 annual salary for in-office or hybrid employees in FL, GA, IN, AZ, AL, MD or TX, and all remote employees • $49,300.00 - $98,600.00 annual salary for in-office or hybrid employees in VA, CA, NH or MA • $51,900.00 - $103,800.00 annual salary for in-office or hybrid employees in NJ

With a passion for life Join our diverse teams of passionate people and a career that allows you to develop both personally and professionally. At Getinge we exist to make life-saving technology accessible for more people. To make a true difference for our customers - and to save more lives, we need team players, forward thinkers, and game changers. Are you looking for an inspiring career? You just found it. Job Overview Primary focus is to build product by following processes to meet production goals. Job Responsibilities and Essential Duties * Understands and adheres to safety policies and practices. * Responsible for quality and adheres to manufacturing process requirements and the Getinge Corporation Quality Policy. * Builds product by following all processes in which trained (in their most current revision), and completing other assigned work, while meeting manufacturing goals and metrics. * Demonstrates a basic understanding of Lean Manufacturing and related principles * Maintains accurate records, including training files and shop floor paperwork (SFP). * Willing to participate in Shared Leadership tasks and responsibilities as directed. * Understands and follows all Getinge and site-specific policies and procedures. * Responsible for attending and passing all required Getinge and site-specific training (i.e., QS Basics, Lean Training). * Demonstrate an understanding of the basic functions of SAP, if applicable. * Responsible for maintaining individual training records. * This is not an inclusive list of job responsibilities. Minimum Requirements * High School diploma (equivalent) or 5 years of work experience. * Minimum experience is 0-12 months in a medical device-manufacturing environment. Required Knowledge, Skills and Abilities * Demonstrated ability to follow processes and has a moderate understanding of the technical job duties. * Able to use and understand Basic English communication both written and spoken; demonstrate basic reading, writing and math skills. * Must demonstrate ability to work effectively in a team setting, be flexible, and exhibit a willingness to learn/ take on new tasks. The compensation range for this position is between $18.50 - $19.00 per hour depending on experience and location. #LI-MV1 About us With a firm belief that every person and community should have access to the best possible care, Getinge provides hospitals and life science institutions with products and solutions aiming to improve clinical results and optimize workflows. The offering includes products and solutions for intensive care, cardiovascular procedures, operating rooms, sterile reprocessing and life science. Getinge employs over 12,000 people worldwide and the products are sold in more than 135 countries. Benefits at Getinge: At Getinge, we offer a comprehensive benefits package, which includes: * Health, Dental, and Vision insurance benefits * 401k plan with company match * Paid Time Off * Wellness initiative & Health Assistance Resources * Life Insurance * Short and Long Term Disability Benefits * Health and Dependent Care Flexible Spending Accounts Getinge is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, pregnancy, genetic information, national origin, disability, protected veteran status or any other characteristic protected by law. Reasonable accommodations are available upon request for candidates taking part in all aspects of the selection process.

ANTA Electric, Inc. is a rapidly growing electronics contract manufacturer located in Dover, NJ. We are a woman owned company that offers design, engineering, and full turnkey services, which we are proud to produce 100% in the United States. We are seeking a few Assemblers for a full time permanent positions - no assembly experience necessary - we are looking for mechanically inclined people. Essential Duties and Responsibilities: Performs basic production activities associated with the production of Wiring Harnesses, Electromechanical Panel Builds, Assemblies. (Entry-Level) Cut wire to drawing dimensions. Apply labeling to assemblies. Apply shrink tubing to assemblies. Perform “tinning” operations on stripped wire as required by the drawing. Perform basic mechanical assembly operations using various hand tools. Perform other basic tasks as assigned by the Production Supervisor Education and/or Work Experience Requirements: No prior work experience required; you must like working with your hands - being good at taking things apart & putting back together. Being mechanically inclined is required. Benefits: 401(k) Dental insurance Health insurance Paid time off Vision insurance Schedule: 8 hour shift - 8am - 4:30 pm - Monday to Friday Ability to commute/relocate: Dover, NJ: Reliably commute or planning to relocate before starting work (Required) Experience: Assembly: 1 year (Preferred)

Pay: $17/hr. Schedule: Mon-Fri 6am-2:30pm Full-time, Benefits, and Weekly Pay Impact Workforce Solutions is hiring for a Full-Time Electrical Assembly / Manufacturing Associate located in Fairfield, NJ. Impact is proud to offer an industry leading benefits and wellness package, with eligibility for some programs beginning Day 1! Our positions are full-time, year-around employment with paid training. We offer: 5 Days of PTO 6 Paid Holidays Up to 50% of health insurance premiums paid by Impact Access to a retirement plan, financial fitness, and employee savings programs Pay $17.00 per hour Schedule 1st Shift; Mon-Fri 6am-2:30pm (occasional overtime) GENERAL PURPOSE This position is responsible for performing light assembly, machining, or packaging of manufactured products while maintaining the specified the quality, efficiency, and inventory control requirements. Work assignments will be scheduled based on training proficiency. DUTIES AND ACCOUNTABILITIES Perform light assembly and/or basic machining operations according to work assignment description and scheduling. Follow the production and quality procedures by following prints and checking materials for defects, maintain production. Read and interpret assembly drawings to perform basic assembly and machining operations Ability to understand and execute verbal instructions regarding duties to be performed Inspect work to validate quality and accuracy Transport products as required to the correct location when completed utilize the proper material handling methods. Monitor and replenish raw materials as required for the post of operation Completed all documentation and electronic data updates as required Prepare and package units for shipment as required Assist with other duties within the department and/or other workstations/departments when necessary Complete clean-up responsibilities and maintain work station according to 5S procedure Perform work at or above pre-established performance objectives Demonstrate our five core values of Integrity, Customer Responsiveness, Innovation, Passionate Contribution & Empowerment and Continuous Improvement Understand workplace hazards and take steps to proactively prevent and report hazards or injuries in the workplace. Cooperate in Safety Programs, initiatives, and investigations Perform other duties deemed necessary to support the Company's business operations JOB REQUIREMENTS Essential Knowledge, Skills and Abilities Required: Ability to read, write and speak English fluently. Possess a basic mechanical, math, and problem-solving aptitude Ability to operate, but not limited to the following equipment: Basic machining posts, Saws, Paint Sprayers, and hoists. Ability to read and interpret assembly drawings, blueprints, BOM's and associated procedures Ability to use and interpret measurement tools such as tape measures, micrometers, and calipers Ability to use basic hand tools (hand drills, screw drivers, hammers etc.) Possess a mechanical aptitude, basic math and problem-solving skills Flexibility and willingness to adapt to frequently changing priorities/tasks Ability to identify and communicate basic process improvements Ability to work well in a team environment Ability to follow directions and make decisions on imperfect information Proven reliability - attendance and punctuality Ability to understand basic lean principles - 5S, Kanban Minimum Education and Experience Preferred: High School diploma or GED Special Job Requirements: Flexibility to work extra hours when needed, including weekends Preferred Qualifications: Previous manufacturing experience WORKING CONDITIONS/PHYSICAL DEMANDS: While performing the duties of this job, the employee is required to stand for 8 hours/day while making coordinated movements of the hands and fingers to grasp/pinch, manipulate and assemble objects. This may include frequent use of vibrating/pneumatic tools, overhead and outstretched reaching with arms, bending/twisting/stooping, kneeling/squatting and frequently lifting/carrying up to 70 lbs. throughout the day and occasionally push/pull/lift up to 100 lbs. as needed. Although on a regular basis lifting requirements may not exceed 40 lbs. Occasionally, depending on the tasks assigned for the day, you may have to sit or stand more or less frequently. Typical assembly work is repetitive in nature. Steel-toed shoes are required for working in this position. Regular production/warehouse environment (no air conditioning). Note: Nothing in this job description restricts management's right to assign or reassign duties and responsibilities to this job at any time. Impact is proud to be an Equal Opportunity Employer. You will be considered for this position based upon your experience and education, without regard to race, color, religion, age, sex, national origin, sexual orientation, ancestry; marital, disabled or veteran status. We are committed to creating and maintaining a workforce environment that is free from any form of discrimination or harassment. EOE Thank you for your interest in Impact Workforce Solutions, we are proud to be an Equal Employment Opportunity Employer and participate in the E-Verify eligibility confirmation program.

Full-time Description About Generant: Generant was founded in the early 1930's, is headquartered in Butler, NJ. We design and manufacture valves and pressure regulators for a wide variety of industries with a strong position in the Industrial Gases and Cryogenics, Medical Gases and Equipment, Energy, and Chemicals markets. Generant is 100% employee owned. We look for dedicated and talented people who accept the responsibilities of thinking like owners and embrace our mission as stated in our Quality Policy: Our Goal is to provide our customers, suppliers and employees true value. We believe this can only be accomplished through a strong commitment to continuous improvement in the quality of our products, services and working environment. Our ideal candidates: Are people who are personally motivated to produce high-quality work Are lifelong learners - driven to continually improve Are well organized Enjoy working in a team environment WE ARE CURRENLY LOOKING FOR 2ND SHIFT WORKERSMONDAY - FRIDAY 4PM - 12:30AM Job Summary: Assembler The primary function of the SECOND SHIFT Assembler is to assemble components into finished goods following engineering drawings and/or instruction from the Assembly Manager and Assistant Assembly Manager using various tools and fixtures. Essential Functions: Assemble parts using basic tools in a timely manner Must have excellent visual attention to detail Maintain accurate counts of items assembled Log in and out of work order control system Maintain clean working environment Perform the job with minimal supervision Due to the nature of the work, non-productive interaction with fellow employees must be kept to a minimum Perform other assignments as required by the Assembly Manager and Assistant Assembly Manager such as: Testing, Engraving, and/or Packaging Requirements Qualifications: Education/Experience/Skills: High School Diploma or equivalent Basic Math Skills (measuring, use of calculator) Ability to carry out detailed written and verbal instructions Must be comfortable using a computer tablet 2 years of Assembly work experience for a manufacturing company is a plus! Language Skills: Must be fluent in English and have very good verbal communication skills Must be able to read and comprehend written instructions Physical Demands: Must frequently lift up to 15 pounds and occasionally lift up to 25 pounds When performing the duties of this job, the employee is regularly required to sit, use hands to finger or handle or feel objects and tools or controls and talk or hear Employee is frequently required to reach with hands and arms Employee is occasionally required to stand, or walk Specific vision abilities require close vision, color vision, peripheral vision, depth perception and the ability to adjust focus. Work Environment: Assembler may work near moving mechanical parts and is occasionally exposed to vibration Noise level is usually moderate Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions Benefits: Medical, Dental, Vision, Employee Stock Ownership Plan (ESOP), 401k, Life and AD&D Insurance Please note that this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.

Job Description Schedule 6-4:30 PM Knowledge of basic tools. Basic solder skills. On the job training.

We are the manufacturer of the IMPACT AIR 45 Highspeed Handpiece. Our Handpiece is specifically engineered for surgical procedures handcrafted in the U.S. for nearly 40 years. We are an Englewood based company is ISO Certified and manufactures CE Marked products. Our products are available across the U.S., Canada, & Europe and are currently licensed in Australia & Korea. Job Description Experienced assembler to work in the manufacturing department with ability to handle very small parts in the production of a medical device. Reading and writing English is a must - ability to follow batch records and procedures; attention to detail and accuracy is required. Qualifications 2 to 3 years manufacturing / assembly experience required - High School diploma, reading and writing English is a must - attention to detail is essential - Additional Information Clean work in a pleasant environment - work hours are 7:45 am to 4:00 pm Monday to Friday. Health, Dental and Life Insurance Benefits after 90 days - 401K available after 1 year - Vacation and sick-time also available. Rate of pay per hour $11.50 to $12.50 depending on experience and qualifications.

Job Title: Electrical Assembler II Company: MMT - Medical Manufacturing Technologies MMT specializes in automation, machine design, material handling, and custom tooling. Every role plays a key part in our success by supporting a culture of accountability, responsiveness, and practical problem solving. Our Electrical Assembler II position is hands-on and detail-oriented, supporting the build and testing of highly precise machinery used across multiple applications. What You'll Do • Assemble and wire complex electrical units that require accuracy, care, and strong problem-solving skills • Position, install, align, and integrate electrical wiring, panels, and components into machinery • Route, wire, assemble, and install electrical and electronic components in cabinets, enclosures, and machines • Read and interpret work orders, schematics, and specifications to determine the correct assembly method • Cut wires to size and prepare insulated connections • Crimp terminal eyelets and lugs using hand or machine crimping tools • Route, twist, tie, and secure wiring following layout and engineering instructions • Connect wiring to relays, switches, breakers, plugs, and other accessories • Conduct continuity and functional tests using multimeters and other test equipment • Troubleshoot and escalate issues to supervisors or engineering • Inspect work according to engineering standards to ensure proper assembly • Cross-train and assist in other areas as needed • Support final inspection and testing to confirm equipment meets performance requirements What You Bring • Two to four years of related electrical assembly experience preferred • Technical school experience is a plus • Experience with centerless grinding is helpful but not required • High school diploma or equivalent required • Strong attention to detail • Ability to read, follow directions, and work with precision • Problem-solving mindset with the ability to identify and communicate issues Physical Requirements • Ability to lift 30-50 pounds regularly • Ability to perform repetitive tasks and work with manual dexterity • Comfortable being on your feet for most of the shift • Ability to follow company procedures and safety guidelines If you enjoy hands-on work, building high-quality machines, and being part of a team that values craftsmanship and innovation, we'd like to meet you. MMT is an affirmative action/equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, work related mental or physical disability, veteran status, sexual orientation, gender identity, or genetic information. EEO/AA Employer/Vet/Disabled We participate in EVerify.

Job Description Job Title: Electrical Assembler II Company: MMT - Medical Manufacturing Technologies About MMT MMT specializes in automation, machine design, material handling, and custom tooling. Every role plays a key part in our success by supporting a culture of accountability, responsiveness, and practical problem solving. Our Electrical Assembler II position is hands-on and detail-oriented, supporting the build and testing of highly precise machinery used across multiple applications. What You'll Do • Assemble and wire complex electrical units that require accuracy, care, and strong problem-solving skills • Position, install, align, and integrate electrical wiring, panels, and components into machinery • Route, wire, assemble, and install electrical and electronic components in cabinets, enclosures, and machines • Read and interpret work orders, schematics, and specifications to determine the correct assembly method • Cut wires to size and prepare insulated connections • Crimp terminal eyelets and lugs using hand or machine crimping tools • Route, twist, tie, and secure wiring following layout and engineering instructions • Connect wiring to relays, switches, breakers, plugs, and other accessories • Conduct continuity and functional tests using multimeters and other test equipment • Troubleshoot and escalate issues to supervisors or engineering • Inspect work according to engineering standards to ensure proper assembly • Cross-train and assist in other areas as needed • Support final inspection and testing to confirm equipment meets performance requirements What You Bring • Two to four years of related electrical assembly experience preferred • Technical school experience is a plus • Experience with centerless grinding is helpful but not required • High school diploma or equivalent required • Strong attention to detail • Ability to read, follow directions, and work with precision • Problem-solving mindset with the ability to identify and communicate issues Physical Requirements • Ability to lift 30-50 pounds regularly • Ability to perform repetitive tasks and work with manual dexterity • Comfortable being on your feet for most of the shift • Ability to follow company procedures and safety guidelines If you enjoy hands-on work, building high-quality machines, and being part of a team that values craftsmanship and innovation, we'd like to meet you. MMT is an affirmative action/equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, work related mental or physical disability, veteran status, sexual orientation, gender identity, or genetic information. EEO/AA Employer/Vet/Disabled We participate in EVerify.

Aid in the production process and mould different fixtures. Utilize various hand and power instruments to complete tasks (measuring tape, hammer, etc.) Analyze completed products and inspect them for quality. Put together old units and, if necessary, carry out modifications and repairs. Produce precise drawings of product designs Reading and understanding product schematics and assembly instructions. Verifying dimensions and product specifications. Ensuring that all parts are properly fitted, aligned and screwed in. Reporting and detailing product malfunctions. Adhering to assembly safety standards.

Essential Duties/ Requirements: Installation of power supply boards, wiring, and other components and materials into cabinets using rivets, screws, drills and other powered hand tools as necessary. (Knowledge and experience working with electronics and electrical hand tools is required). Performing hi-potential (hi-pot) testing (or other types of testing as necessary) to assure good isolation. Packaging and or labeling finished products as necessary. Performance of any other company related job tasks required by business needs. Knowledge and experience working with electronics and electrical hand tools is required. Qualifications Physical Requirements: A moderate level of hand to eye coordination and dexterity Prolonged periods of standing. Must be able to frequently lift up to 50 pounds. Please Note: The physical requirements described above are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions Work Environment: Work is conducted in an indoor production environment; the employee is not exposed to any outside environmental conditions. Additional Information Rate of Pay: In compliance with the New York City salary transparency requirements, the hourly rate for this position is $16.50 per hour; which may be increased to $17.00-$17.50 per hour upon successful completion of the 90th day introductory period. Annual performance- based increases are also available. Status: Full-time/ regular (40 hours per week) Monday- Friday (8:30am- 5:00pm) *Full Benefits We are an Equal Opportunity-Affirmative Action Employer

Assemble or fabricate lighting parts, pieces or products using a variety of tools and equipment according to required specifications in a production line in a manufacturing organization. Essential duties and responsibilities Read, interpret and follow basic blueprints, diagrams, engineering drawings, specifications, bills of materials, and other written instructions or procedures to accurately assemble equipment and products Utilize hand held tools such as a hand held screw and drill gun Maintain inventory of product in work stations Perform quality work checks as well as measurements with a tape measure and ruler to insure the product meets quality standards Identify product defects and complete appropriate documentation when defects are identified Rework and/or repair assembled equipment and products according to engineering specification changes Perform all work in accordance with quality standards and established safety procedures Cut plastics, metal and wood with a saw Drill holes, solder, file and package lamps Maintain a clean and safe work area Perform other tasks as necessary Qualification requirements Must be proficient in English. Must be able to follow directions Ability to perform work accurately and thoroughly Ability to use thinking and reasoning to solve a problem and to think in such a way as to produce a new concept or idea High attention to detail and self-motivation skills Basic computer navigation/ utilization skills a plus High School Diploma or GED preferred Specific technical or vocational training or certification may be required; may be required to pass ruler test Physical demands and abilities Regularly lift 20-40 pounds; may have to lift up to 50 pounds. Regularly perform repetitive tasks Regularly possess manual dexterity to put parts or pieces together quickly and accurately Specific vision abilities required include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. Bending, reaching, use tools, and standing for long periods of time are also required. Coronet is an Equal Opportunity Employer